ANNEX IISupplementary provisions
ANNEX II Annex VII to Regulation (EU) No 833/2014 is amended as follows: (a) in Part A, Category VIII, the following section is inserted: ‘X.C.VIII.005 Constituent chemicals for propellants as follows: a. Toluene Diisocyanate, in any isomeric form (CAS 584-84-9, 91-08-7, 26471-62-5, 9002-68-2, 26628-22-8); b. Methyl Diphenyl Diisocyanate (CAS 101-68-8); c. Isophorone Diisocyanate (CAS 4098-71-9); d. Xylidine in any isomeric form (CAS 87-59-2, 95-68-1, 95-78-3, 87-62-7, 95-63-6 or 108-69-0); e. Hydroxy Terminated Polyether (HTPE); f. Hydroxy Terminated Caprolactone Ether (HTCE). Technical Note: This item refers to pure substance and any mixture containing at least 50 % of one of the chemicals mentioned above. ’; (b) In Part B, table 5, ‘Machine tools, additive manufacturing equipment, and related items’ is replaced by the following: ‘5. Machine tools, additive manufacturing equipment, and related items CN Code Description 8205 59 80 Hand tools, including glaziers’ diamonds, excluding household tools, and tools for masons, moulders, cement workers, plasterers and painters 8456 11 Machine tools for working any material by removal of material, operated by laser 8456 30 Operated by electrodischarge processes 8456 50 Water-jet cutting machines 8457 10 Machining centres for working metal 8458 11 Horizontal lathes, including turning centres, for removing metal, numerically controlled 8458 91 Other numerically controlled lathes 8459 61 Other milling machines numerically controlled 8466 10 Tool holders, for any type of tool for working in the hand and for machine tools; self-opening dieheads 8466 93 Parts and accessories suitable for use solely or principally with the machines of headings 8456 to 8461 , n.e.s. 8485 20 Machines for additive manufacturing by plastics or rubber deposit 8485 30 Machines for additive manufacturing by plaster, cement, ceramics or glass deposit 8485 90 Parts of machines for additive manufacturing’.