Commission Implementing Regulation (EU) 2025/2621 ANNEX I

Default values for goods imported into the customs territory of the Union, except for electricity

ANNEX ISupplementary provisions

ANNEX I Default values for goods imported into the customs territory of the Union, except for electricity Where a country or territory is not explicitly listed, the default value for the respective good from the table ‘Other countries and territories’ needs to be selected. Where a country or territory is explicitly listed but no value is provided or the relevant field shows ‘–’, the default value for the respective good from the table ‘Other countries and territories’ needs to be selected. Where default values are used to determine the specific embedded emissions of a final good or of a precursor, the specific embedded free allocation shall be based on the corresponding underlying production route determining the CBAM benchmark (BM) as defined in Commission Implementing Regulation (EU) 2025/2620  ( 1 ) on the calculation of the free allocation adjustment to the number of CBAM certificates to be surrendered. The meaning of the indicators is as follows: (A) grey clinker / cement (B) white clinker / cement (C) Carbon Steel based on BF/BOF (D) Carbon Steel based on DRI/EAF (E) Carbon Steel based on Scrap/EAF (F) Low alloy Steel based on BF/BOF (G) Low alloy Steel based on DRI/EAF (H) Low alloy Steel based on scrap/EAF (J) High alloy Steel (based on EAF) (K) primary Aluminium (L) secondary Aluminium If no production route is indicated for a CN code, the CBAM benchmark (BM) is independent of the production route. Albania Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – – – –   2523 10 00 White clinker – – – – – –   2523 10 00 Grey clinker 0,870 0 0,870 0,957 1,044 1,131 (A) 2523 21 00 White Portland cement – – – 1,230 0,140 1,370   2523 29 00 Grey Portland cement 0,900 0,030 0,930 1,023 1,116 1,209   2523 90 00 White hydraulic cements – – – – – – (B) 2523 90 00 Grey hydraulic cements 0,860 0,030 0,890 0,979 1,068 1,157 (A) 2523 30 00 Aluminous cement – – – – – –   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 2,730 0,040 2,760 2,788 2,788 2,788   2814 10 00 Anhydrous ammonia – – – – – –   2814 20 00 Ammonia in aqueous solution 0,650 0,030 0,680 0,687 0,687 0,687   2834 21 00 Nitrate of potassium 2,190 0,050 2,240 2,262 2,262 2,262   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,440 0,030 0,470 0,475 0,475 0,475   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,730 0,030 0,760 0,768 0,768 0,768   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,330 0,080 1,420 1,434 1,434 1,434   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,300 0,080 1,390 1,404 1,404 1,404   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,600 0,060 0,670 0,677 0,677 0,677   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,380 0,070 1,460 1,475 1,475 1,475   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,650 0,050 1,700 1,717 1,717 1,717   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,540 0,080 2,620 2,646 2,646 2,646   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,150 0,080 2,220 2,242 2,242 2,242   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,150 0,080 2,220 2,242 2,242 2,242   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 4,260 0,060 4,310 4,353 4,353 4,353   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,130 0,070 2,200 2,222 2,222 2,222   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,560 0,070 1,620 1,636 1,636 1,636   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,570 0,080 1,640 1,656 1,656 1,656   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,800 0,060 0,860 0,869 0,869 0,869   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,050 0,080 1,120 1,131 1,131 1,131   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,710 0,060 0,770 0,778 0,778 0,778   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,500 0,050 0,550 0,556 0,556 0,556   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,320 0,040 0,350 0,354 0,354 0,354   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,450 0,090 1,540 1,555 1,555 1,555   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,560 0,080 0,640 0,646 0,646 0,646   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,430 0,060 1,490 1,505 1,505 1,505   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,730 0,040 0,770 0,778 0,778 0,778   Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 14,030 N/A 14,030 15,433 16,836 18,239   Algeria Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – – – –   2523 10 00 White clinker 1,290 0,060 1,340 1,474 1,608 1,742 (B) 2523 10 00 Grey clinker 1,240 0,040 1,280 1,408 1,536 1,664 (A) 2523 21 00 White Portland cement 1,230 0,140 1,370 1,507 1,644 1,781   2523 29 00 Grey Portland cement 1,230 0,060 1,300 1,430 1,560 1,690   2523 90 00 White hydraulic cements 1,280 0,170 1,440 1,584 1,728 1,872 (B) 2523 90 00 Grey hydraulic cements 1,170 0,070 1,240 1,364 1,488 1,612 (A) 2523 30 00 Aluminous cement – – – – – –   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 2,490 0,040 2,530 2,555 2,555 2,555   2814 10 00 Anhydrous ammonia 1,960 0,120 2,080 2,101 2,101 2,101   2814 20 00 Ammonia in aqueous solution 0,590 0,040 0,620 0,626 0,626 0,626   2834 21 00 Nitrate of potassium 2 0,060 2,060 2,081 2,081 2,081   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,440 0,030 0,470 0,475 0,475 0,475   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,720 0,030 0,760 0,768 0,768 0,768   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,320 0,100 1,410 1,424 1,424 1,424   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,290 0,090 1,380 1,394 1,394 1,394   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,560 0,070 0,630 0,636 0,636 0,636   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,270 0,080 1,360 1,374 1,374 1,374   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,510 0,060 1,570 1,586 1,586 1,586   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,330 0,090 2,420 2,444 2,444 2,444   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,980 0,090 2,070 2,091 2,091 2,091   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,980 0,090 2,070 2,091 2,091 2,091   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 3,880 0,060 3,940 3,979 3,979 3,979   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,950 0,080 2,030 2,050 2,050 2,050   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,460 0,080 1,530 1,545 1,545 1,545   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,490 0,090 1,580 1,596 1,596 1,596   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,730 0,080 0,810 0,818 0,818 0,818   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,970 0,090 1,060 1,071 1,071 1,071   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,660 0,070 0,720 0,727 0,727 0,727   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,460 0,050 0,510 0,515 0,515 0,515   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,290 0,040 0,340 0,343 0,343 0,343   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,330 0,110 1,440 1,454 1,454 1,454   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,520 0,090 0,610 0,616 0,616 0,616   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,310 0,070 1,380 1,394 1,394 1,394   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,670 0,050 0,720 0,727 0,727 0,727   Aluminium         10 % mark-up 20 % mark-up 30 % mark-up   7601 Unwrought aluminium 0,360 N/A 0,360 0,396 0,432 0,468 (L) 7603 Aluminium powders and flakes 0,920 N/A 0,920 1,012 1,104 1,196 (L) 7604 10 10 Bars and rods 1,140 N/A 1,140 1,254 1,368 1,482 (L) 7604 10 90 Profiles 1,160 N/A 1,160 1,276 1,392 1,508 (L) 7604 21 00 Hollow profiles 1,160 N/A 1,160 1,276 1,392 1,508 (L) 7604 29 10 Bars and rods 1,140 N/A 1,140 1,254 1,368 1,482 (L) 7604 29 90 Profiles 1,160 N/A 1,160 1,276 1,392 1,508 (L) 7605 Aluminium wire 1,140 N/A 1,140 1,254 1,368 1,482 (L) 7606 Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm 1,600 N/A 1,600 1,760 1,920 2,080 (L) 7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm 1,600 N/A 1,600 1,760 1,920 2,080 (L) 7608 Aluminium tubes and pipes 1,160 N/A 1,160 1,276 1,392 1,508 (L) 7609 00 00 Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) 1,160 N/A 1,160 1,276 1,392 1,508 (L) 7610 10 00 Doors, windows and their frames and thresholds for doors 1,160 N/A 1,160 1,276 1,392 1,508 (L) 7610 90 Other 1,160 N/A 1,160 1,276 1,392 1,508 (L) 7610 90 10 Bridges and bridge-sections, towers and lattice masts 1,160 N/A 1,160 1,276 1,392 1,508 (L) 7610 90 90 Other 1,160 N/A 1,160 1,276 1,392 1,508 (L) 7611 00 00 Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 1,600 N/A 1,600 1,760 1,920 2,080 (L) 7612 Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 1,600 N/A 1,600 1,760 1,920 2,080 (L) 7613 00 00 Aluminium containers for compressed or liquefied gas 1,600 N/A 1,600 1,760 1,920 2,080 (L) 7614 Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated 1,140 N/A 1,140 1,254 1,368 1,482 (L) 7616 10 00 Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles 1,600 N/A 1,600 1,760 1,920 2,080 (L) 7616 91 00 Cloth, grill, netting and fencing, of aluminium wire 1,600 N/A 1,600 1,760 1,920 2,080 (L) 7616 99 10 Cast 0,920 N/A 0,920 1,012 1,104 1,196 (L) 7616 99 90 Other 1,600 N/A 1,600 1,760 1,920 2,080 (L) Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066   Iron and steel         10 % mark-up 20 % mark-up 30 % mark-up   2601 12 00 Agglomerated iron ores and concentrates (excl. roasted iron pyrites) 0,180 0,030 0,210 0,231 0,252 0,273   7201 Pig iron and spiegeleisen, in pigs, blocks or other primary forms 2,870 N/A 2,870 3,157 3,444 3,731   7202 11 Ferro-manganese, containing by weight > 2% of carbon – N/A – – – –   7202 19 Ferro-manganese, containing by weight <= 2% carbon – N/A – – – –   7202 41 Ferro-chromium, containing by weight > 4% of carbon – N/A – – – –   7202 49 Ferro-chromium, containing by weight <= 4% of carbon – N/A – – – –   7202 60 00 Ferro-nickel – N/A – – – –   7203 Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99,94%, in lumps, pellets or similar forms 0,810 N/A 0,810 0,891 0,972 1,053   7205 Granules and powders of pig iron, spiegeleisen, iron or steel (excl. granules and powders of ferro-alloys, turnings and filings of iron or steel, radioactive iron powders "isotopes" and certain low-calibre, substandard balls for ballbearings) 2,890 N/A 2,890 3,179 3,468 3,757 (C) 7206 Iron and non-alloy steel in ingots or other primary forms (excl. remelting scrap ingots, products obtained by continuous casting and iron of heading 7203) see below see below see below see below see below see below   7206 10 00 Ingots, of iron and non-alloy steel (excl. remelted scrap ingots, continuous cast products, iron of heading 7203) 3 N/A 3 3,300 3,600 3,900 (C) 7206 90 00 Iron and non-alloy steel, in puddled bars or other primary forms (excl. ingots, remelted scrap ingots, continuous cast products, iron of heading 7203) 3 N/A 3 3,300 3,600 3,900 (C) 7207 Semi-finished products of iron or non-alloy steel see below see below see below see below see below see below   7207 11 11 Semi-finished products, of non-alloy free-cutting steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting 3 N/A 3 3,300 3,600 3,900 (C) 7207 11 14 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness of <= 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel) 3 N/A 3 3,300 3,600 3,900 (C) 7207 11 16 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness of > 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel) 3 N/A 3 3,300 3,600 3,900 (C) 7207 11 90 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular cross-section, the width < twice the thickness, forged 3 N/A 3 3,300 3,600 3,900 (C) 7207 12 10 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtained by continuous casting 3 N/A 3 3,300 3,600 3,900 (C) 7207 12 90 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular "other than square" cross-section, the width >= twice the thickness, forged 3 N/A 3 3,300 3,600 3,900 (C) 7207 19 12 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting 3 N/A 3 3,300 3,600 3,900 (C) 7207 19 19 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, forged 3 N/A 3 3,300 3,600 3,900 (C) 7207 19 80 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon (excl. semi-products, of square, rectangular, circular or polygonal cross-section) 3 N/A 3 3,300 3,600 3,900 (C) 7207 20 11 Semi-finished products, of non-alloy free-cutting steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting 3 N/A 3 3,300 3,600 3,900 (C) 7207 20 15 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% but < 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel) 3 N/A 3 3,300 3,600 3,900 (C) 7207 20 17 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel) 3 N/A 3 3,300 3,600 3,900 (C) 7207 20 19 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, forged 3 N/A 3 3,300 3,600 3,900 (C) 7207 20 32 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtained by continuous casting 3 N/A 3 3,300 3,600 3,900 (C) 7207 20 39 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of rectangular "other than square" cross-section and the width >= twice the thickness, forged 3 N/A 3 3,300 3,600 3,900 (C) 7207 20 52 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting 3 N/A 3 3,300 3,600 3,900 (C) 7207 20 59 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of circular or polygonal cross-section, forged 3 N/A 3 3,300 3,600 3,900 (C) 7207 20 80 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon (excl. those of square, rectangular, circular or polygonal cross-section) 3 N/A 3 3,300 3,600 3,900 (C) 7208 Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled, not clad, plated or coated 3 N/A 3 3,300 3,600 3,900 (C) 7209 Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, cold-rolled "cold-reduced", not clad, plated or coated 3 N/A 3 3,300 3,600 3,900 (C) 7210 Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated 3 N/A 3 3,300 3,600 3,900 (C) 7211 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", not clad, plated or coated see below see below see below see below see below see below   7211 13 00 Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as "wide flats" 3 N/A 3 3,300 3,600 3,900 (C) 7211 14 00 Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, not further worked than hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm (excl. "wide flats") 3 N/A 3 3,300 3,600 3,900 (C) 7211 19 00 Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, simply hot-rolled, not clad, plated or coated, of a thickness < 4,75 mm (excl. "wide flats") 3 N/A 3 3,300 3,600 3,900 (C) 7211 23 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight < 0,25% of carbon 3 N/A 3 3,300 3,600 3,900 (C) 7211 29 00 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight >= 0,25% of carbon 3 N/A 3 3,300 3,600 3,900 (C) 7211 90 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked, but not clad, plated or coated 3 N/A 3 3,300 3,600 3,900 (C) 7212 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated 3 N/A 3 3,300 3,600 3,900 (C) 7213 Bars and rods of iron or non-alloy steel, hot-rolled, in irregularly wound coils 3 N/A 3 3,300 3,600 3,900 (C) 7214 Bars and rods, of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but incl. those twisted after rolling (excl. in irregularly wound coils) see below see below see below see below see below see below   7214 10 00 Bars and rods, of iron or non-alloy steel, not further worked than forged (excl. in irregularly wound coils) 3 N/A 3 3,300 3,600 3,900 (C) 7214 20 00 Bars and rods, of iron or non-alloy steel, with indentations, ribs, groves or other deformations produced during the rolling process 3 N/A 3 3,300 3,600 3,900 (C) 7214 30 00 Bars and rods, of non-alloy free-cutting steel, not further worked than hot-rolled, hot-drawn or hot-extruded (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling) 3 N/A 3 3,300 3,600 3,900 (C) 7214 91 Bars and rods, of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, of rectangular "other than square" cross-section (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process, bars and rods twisted after rolling and free-cutting steel) 3 N/A 3 3,300 3,600 3,900 (C) 7214 99 Bars and rods, of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded (excl. of rectangular [other than square] cross-section and those containing indentations, ribs, grooves or other deformations produced during the rolling process, and of non-alloy free-cutting steel) 3 N/A 3 3,300 3,600 3,900 (C) 7215 Bars and rods, of iron or non-alloy steel, cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked, n.e.s. 3 N/A 3 3,300 3,600 3,900 (C) 7216 Angles, shapes and sections of iron or non-alloy steel, n.e.s. 3 N/A 3 3,300 3,600 3,900 (C) 7217 Wire of iron or non-alloy steel, in coils (excl. bars and rods) see below see below see below see below see below see below   7217 10 Wire of iron or non-alloy steel, in coils, not plated or coated, whether or not polished (excl. bars and rods) 3 N/A 3 3,300 3,600 3,900 (C) 7217 20 Wire of iron or non-alloy steel, in coils, plated or coated with zinc (excl. bars and rods) 3 N/A 3 3,300 3,600 3,900 (C) 7217 30 Wire of iron or non-alloy steel, in coils, plated or coated with base metals (excl. plated or coated with zinc, and bars and rods) 3 N/A 3 3,300 3,600 3,900 (C) 7217 90 Wire of iron or non-alloy steel, in coils, plated or coated (excl. plated or coated with base metals, and bars and rods) 3 N/A 3 3,300 3,600 3,900 (C) 7218 Stainless steel in ingots or other primary forms (excl. remelting scrap ingots and products obtained by continuous casting); semi-finished products of stainless steel see below see below see below see below see below see below   7218 10 00 Steel, stainless, in ingots and other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) 3,300 N/A 3,300 3,630 3,960 4,290   7218 91 Semi-finished products of stainless steel, of rectangular "other than square" cross-section 3,300 N/A 3,300 3,630 3,960 4,290   7218 99 11 Semi-finished products of stainless steel, of square cross-section, rolled or obtained by continuous casting 3,300 N/A 3,300 3,630 3,960 4,290   7218 99 19 Semi-finished products of stainless steel, of square cross-section, forged 3,300 N/A 3,300 3,630 3,960 4,290   7218 99 20 Semi-finished products of stainless steel, of circular cross-section or of cross-section other than square or rectangular, rolled or obtained by continuous casting 3,300 N/A 3,300 3,630 3,960 4,290   7218 99 80 Semi-finished products of stainless steel, forged (excl. products of square or rectangular cross-section) 3,300 N/A 3,300 3,630 3,960 4,290   7219 Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7219 11 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of > 10 mm 3,300 N/A 3,300 3,630 3,960 4,290   7219 12 Flat-rolled products of stainless steel, of a width of>= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 4,7 mm and <= 10 mm 3,300 N/A 3,300 3,630 3,960 4,290   7219 13 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 3 mm and < 4,75 mm 3,300 N/A 3,300 3,630 3,960 4,290   7219 14 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of < 3 mm 3,300 N/A 3,300 3,630 3,960 4,290   7219 21 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of > 10 mm 3,300 N/A 3,300 3,630 3,960 4,290   7219 22 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 4,75 mm and <= 10 mm 3,300 N/A 3,300 3,630 3,960 4,290   7219 23 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 3 mm and < 4,75 mm 3,300 N/A 3,300 3,630 3,960 4,290   7219 24 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of < 3 mm 3,300 N/A 3,300 3,630 3,960 4,290   7219 31 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 4,75 mm 3,300 N/A 3,300 3,630 3,960 4,290   7219 32 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 3 mm but < 4,75 mm 3,300 N/A 3,300 3,630 3,960 4,290   7219 33 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of > 1 mm but < 3 mm 3,300 N/A 3,300 3,630 3,960 4,290   7219 34 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 0,5 mm but <= 1 mm 3,300 N/A 3,300 3,630 3,960 4,290   7219 35 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of < 0,5 mm 3,300 N/A 3,300 3,630 3,960 4,290   7219 90 Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked 3,300 N/A 3,300 3,630 3,960 4,290   7220 Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7220 11 00 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of >= 4,75 mm 3,300 N/A 3,300 3,630 3,960 4,290   7220 12 00 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of < 4,75 mm 3,300 N/A 3,300 3,630 3,960 4,290   7220 20 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" 3,300 N/A 3,300 3,630 3,960 4,290   7220 90 Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked 3,300 N/A 3,300 3,630 3,960 4,290   7221 Bars and rods of stainless steel, hot-rolled, in irregularly wound coils 3,300 N/A 3,300 3,630 3,960 4,290   7222 Other bars and rods of stainless steel; angles, shapes and sections of stainless steel, n.e.s. see below see below see below see below see below see below   7222 11 Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only hot-extruded, of circular cross-section 3,300 N/A 3,300 3,630 3,960 4,290   7222 19 Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only extruded (excl. of circular cross-section) 3,300 N/A 3,300 3,630 3,960 4,290   7222 20 Other bars and rods of stainless steel, not further worked than cold-formed or cold-finished 3,300 N/A 3,300 3,630 3,960 4,290   7222 30 Other bars and rods of stainless steel, cold-formed or cold-finished and further worked, or not further worked than forged, or forged, or hot-formed by other means and further worked, n.e.s. 3,300 N/A 3,300 3,630 3,960 4,290   7222 40 Angles, shapes and sections of stainless steel, n.e.s. 3,300 N/A 3,300 3,630 3,960 4,290   7223 Wire of stainless steel, in coils (excl. bars and rods) see below see below see below see below see below see below   7223 00 Wire of stainless steel, in coils (excl. bars and rods) 3,300 N/A 3,300 3,630 3,960 4,290   7224 Steel, alloy, other than stainless, in ingots or other primary forms, semi-finished products of alloy steel other than stainless (excl. waste and scrap in ingot form, and products obtained by continuous casting) see below see below see below see below see below see below   7224 10 Steel, alloy, other than stainless, in ingots or other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) 3,410 N/A 3,410 3,751 4,092 4,433 (F) 7224 90 02 Semi-finished products of tool steel 3,410 N/A 3,410 3,751 4,092 4,433 (F) 7224 90 03 Semi-finished products of high-speed steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting the width measuring < twice the thickness 3,410 N/A 3,410 3,751 4,092 4,433 (F) 7224 90 05 Semi-finished products of steel containing by weight <= 0,7% of carbon, 0,5% to 1,2% of manganese, 0,6% to 2,3% of silicon, or of steel containing by weight >= 0,0008% of boron with any other element < the minimum content referred to in Note 1 f to chapter 72, of square or rectangular cross-section, hot rolled or obtained by continuous casting, the width measuring < twice the thickness 3,410 N/A 3,410 3,751 4,092 4,433 (F) 7224 90 07 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring < twice the thickness (excl. of tool steel, high-speed steel and articles of subheading 7224.90.05) 3,410 N/A 3,410 3,751 4,092 4,433 (F) 7224 90 14 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring >= twice the thickness (excl. of tool steel) 3,410 N/A 3,410 3,751 4,092 4,433 (F) 7224 90 18 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, forged (excl. of tool steel) 3,410 N/A 3,410 3,751 4,092 4,433 (F) 7224 90 31 Semi-finished products of steel containing by weight 0,9% to 1,15% carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting 3,410 N/A 3,410 3,751 4,092 4,433 (F) 7224 90 38 Semi-finished products of alloy steel, other than stainless steel, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting (excl. of tool steel and products containing by weight 0,9% to 1,15% of carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum) 3,410 N/A 3,410 3,751 4,092 4,433 (F) 7224 90 90 Semi-finished products of alloy steel, other than stainless steel, forged (excl. of tool steel and products of square or rectangular, circular or polygamol cross-section) 3,410 N/A 3,410 3,751 4,092 4,433 (F) 7225 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7225 11 00 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, grain-oriented 4,520 N/A 4,520 4,972 5,424 5,876 (C) 7225 19 10 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, hot-rolled 3,410 N/A 3,410 3,751 4,092 4,433 (C) 7225 19 90 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, cold-rolled "cold-reduced", non-grain-oriented 3,410 N/A 3,410 3,751 4,092 4,433 (F) 7225 30 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, in coils (excl. products of silicon-electrical steel) 3,410 N/A 3,410 3,751 4,092 4,433 (F) 7225 40 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, not in coils (excl. products of silicon-electrical steel) 3,410 N/A 3,410 3,751 4,092 4,433 (F) 7225 50 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of silicon-electrical steel) 3,410 N/A 3,410 3,751 4,092 4,433 (F) 7225 91 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and electrolytically plated or coated with zinc (excl. products of silicon-electrical steel) 3,410 N/A 3,410 3,751 4,092 4,433 (F) 7225 92 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and plated or coated with zinc (excl. electrolytically plated or coated and products of silicon-electrical steel) 3,410 N/A 3,410 3,751 4,092 4,433 (F) 7225 99 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. plated or coated with zinc and products of silicon-electrical steel) 3,410 N/A 3,410 3,751 4,092 4,433 (F) 7226 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7226 11 00 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", grain-oriented 4,520 N/A 4,520 4,972 5,424 5,876 (C) 7226 19 10 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, not further worked than hot-rolled 3,410 N/A 3,410 3,751 4,092 4,433 (C) 7226 19 80 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, cold-rolled "cold-reduced", whether or not further worked, or hot-rolled and further worked, non-grain-oriented 3,410 N/A 3,410 3,751 4,092 4,433 (F) 7226 20 00 Flat-rolled products of high-speed steel, of a width of <= 600 mm, hot-rolled or cold-rolled "cold-reduced" 3,410 N/A 3,410 3,751 4,092 4,433 (F) 7226 91 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than hot-rolled (excl. products of high-speed steel or silicon-electrical steel) 3,410 N/A 3,410 3,751 4,092 4,433 (F) 7226 92 00 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of high-speed steel or silicon-electrical steel) 3,410 N/A 3,410 3,751 4,092 4,433 (F) 7226 99 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. products of high-speed steel or silicon-electrical steel) 3,410 N/A 3,410 3,751 4,092 4,433 (F) 7227 Bars and rods of alloy steel other than stainless, hot-rolled, in irregularly wound coils 3,410 N/A 3,410 3,751 4,092 4,433 (C)/(F) 7228 Other bars and rods of alloy steel other than stainless, angles, shapes and sections of alloy steel other than stainless, n.e.s.; hollow drill bars and rods, of alloy or non-alloy steel see below see below see below see below see below see below   7228 10 20 Bars and rods of high-speed steel, not further worked than hot-rolled, hot-drawn or extruded, and hot-rolled, hot-drawn or extruded, not further worked than clad (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,410 N/A 3,410 3,751 4,092 4,433 (F) 7228 10 50 Bars and rods of high-speed steel, forged (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,410 N/A 3,410 3,751 4,092 4,433 (F) 7228 10 90 Bars and rods of high-speed steel, not further worked than cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked (excl. forged products, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,410 N/A 3,410 3,751 4,092 4,433 (F) 7228 20 Bars and rods of silico-manganese steel (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,410 N/A 3,410 3,751 4,092 4,433 (F) 7228 30 Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,410 N/A 3,410 3,751 4,092 4,433 (C)/(F) 7228 40 Bars and rods of alloy steel other than stainless, not further worked than forged (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,410 N/A 3,410 3,751 4,092 4,433 (F) 7228 50 Bars and rods of alloy steel other than stainless, not further worked than cold-formed or cold-finished (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,410 N/A 3,410 3,751 4,092 4,433 (C)/(F) 7228 60 Bars and rods of alloy steel other than stainless, cold-formed or cold-finished and further worked or hot-formed and further worked, n.e.s. (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,410 N/A 3,410 3,751 4,092 4,433 (F) 7228 70 Angles, shapes and sections of alloy steel other than stainless, n.e.s. 3,410 N/A 3,410 3,751 4,092 4,433 (F) 7228 80 00 Hollow drill bars and rods, of alloy or non-alloy steel 3,410 N/A 3,410 3,751 4,092 4,433 (F) 7229 Wire of alloy steel other than stainless, in coils (excl. bars and rods) 3,410 N/A 3,410 3,751 4,092 4,433 (C)/(F) 7301 Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel 3 N/A 3 3,300 3,600 3,900 (C) 7302 Railway or tramway track construction material of iron or steel, the following : rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers "cross-ties", fish-plates, chairs, chair wedges, sole plates "base plates", rail clips, bedplates, ties and other material specialised for jointing or fixing rails 3,190 N/A 3,190 3,509 3,828 4,147 (C) 7303 Tubes, pipes and hollow profiles, of cast iron see below see below see below see below see below see below   7303 00 Tubes, pipes and hollow profiles, of cast iron 2,870 N/A 2,870 3,157 3,444 3,731   7304 Tubes, pipes and hollow profiles, seamless, of iron or steel (excl. products of cast iron) see below see below see below see below see below see below   7304 11 00 Line pipe of a kind used for oil or gas pipelines, seamless, of stainless steel 3,300 N/A 3,300 3,630 3,960 4,290   7304 19 Line pipe of a kind used for oil or gas pipelines, seamless, of iron or steel (excl. products of stainless steel or of cast iron) 3 N/A 3 3,300 3,600 3,900 (C) 7304 22 00 Drill pipe, seamless, of stainless steel, of a kind used in drilling for oil or gas 3,300 N/A 3,300 3,630 3,960 4,290   7304 23 00 Drill pipe, seamless, of a kind used in drilling for oil or gas, of iron or steel (excl. products of stainless steel or of cast iron) 3 N/A 3 3,300 3,600 3,900 (C) 7304 24 00 Casing and tubing, seamless, of a kind used for drilling for oil or gas, of stainless steel 3,300 N/A 3,300 3,630 3,960 4,290   7304 29 Casing and tubing, seamless, of iron or steel, of a kind used in drilling for oil or gas (excl. products of cast iron) 3 N/A 3 3,300 3,600 3,900 (C) 7304 31 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" (excl. cast iron products and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used for drilling for oil or gas) 3 N/A 3 3,300 3,600 3,900 (C) 7304 39 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, not cold-drawn or cold-rolled "cold-reduced" (excl. cast iron products, line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas) 3 N/A 3 3,300 3,600 3,900 (C) 7304 41 00 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas) 3,300 N/A 3,300 3,630 3,960 4,290   7304 49 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines or of a kind used for drilling for oil or gas) 3,300 N/A 3,300 3,630 3,960 4,290   7304 51 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil) 2,910 N/A 2,910 3,201 3,492 3,783 (F) 7304 59 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil) 2,910 N/A 2,910 3,201 3,492 3,783 (C)/(F) 7304 90 00 Tubes, pipes and hollow profiles, seamless, of non-circular cross-section, of iron or steel (excl. products of cast iron) 3 N/A 3 3,300 3,600 3,900 (C) 7305 Tubes and pipes, having circular cross-sections and an external diameter of > 406,4 mm, of flat-rolled products of iron or steel "e.g., welded, riveted or similarly closed" 3 N/A 3 3,300 3,600 3,900 (C) 7306 Tubes, pipes and hollow profiles "e.g., open seam or welded, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless tubes and pipes and tubes having internal and external circular cross-sections and an external diameter of > 406,4 mm) see below see below see below see below see below see below   7306 11 00 Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm 3,300 N/A 3,300 3,630 3,960 4,290   7306 19 00 Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron) 3 N/A 3 3,300 3,600 3,900 (C) 7306 21 00 Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm 3,300 N/A 3,300 3,630 3,960 4,290   7306 29 00 Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron) 3 N/A 3 3,300 3,600 3,900 (C) 7306 30 12 Precision tubes, welded, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" 3 N/A 3 3,300 3,600 3,900 (C) 7306 30 18 Precision tubes, welded, of circular cross-section, of iron or non-alloy steel (excl. cold-drawn or cold-rolled) 3 N/A 3 3,300 3,600 3,900   7306 30 41 Threaded or threadable tubes "gas pipe", welded, of circular cross-section, of iron or non-alloy steel, plated or coated with zinc 3 N/A 3 3,300 3,600 3,900 (C) 7306 30 49 Threaded or threadable tubes "gas pipe", welded, of circular cross-section, of iron or non-alloy steel (excl. products plated or coated with zinc) 3 N/A 3 3,300 3,600 3,900 (C) 7306 30 72 Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel, of an external diameter of <= 168,3 mm, plated or coated with zinc (excl. line pipe of a kind used for oil or gas pipelines or casing and tubingof a kind used in drilling for oil or gas) 3 N/A 3 3,300 3,600 3,900 (C) 7306 30 77 Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel of an external diameter of <= 168,3 mm (excl. plated or coated with zinc and line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used in drilling for oil or gas, precision tubes and threaded or threadable tubes "gas pipe") 3 N/A 3 3,300 3,600 3,900 (C) 7306 30 80 Tubes, pipes and hollow profiles, welded, having a circular cross-section, of iron or steel, of an external diameter of > 168,3 mm but <= 406,4 mm (excl. line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, or precision steel tubes, electrical conduit tubes or threaded or threadable tubes "gas pipe") 3 N/A 3 3,300 3,600 3,900 (C) 7306 40 20 Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. products having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) 3,300 N/A 3,300 3,630 3,960 4,290   7306 40 80 Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel (excl. products cold-drawn or cold-rolled "cold-reduced", tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) 3,300 N/A 3,300 3,630 3,960 4,290   7306 50 21 Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" 2,930 N/A 2,930 3,223 3,516 3,809 (F) 7306 50 29 Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless (excl. cold-drawn or cold-rolled) 2,930 N/A 2,930 3,223 3,516 3,809 (F) 7306 50 80 Tubes, pipes and hollow profiles, welded, of circular cross-section, of alloy steel other than stainless (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and precision steel tubes) 2,930 N/A 2,930 3,223 3,516 3,809 (F) 7306 61 10 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel 3,300 N/A 3,300 3,630 3,960 4,290   7306 61 92 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of <= 2 mm 3 N/A 3 3,300 3,600 3,900 (C) 7306 61 99 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of > 2 mm 3 N/A 3 3,300 3,600 3,900 (C) 7306 69 10 Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) 3,300 N/A 3,300 3,630 3,960 4,290   7306 69 90 Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of iron or steel other than stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) 3 N/A 3 3,300 3,600 3,900 (C) 7306 90 00 Tubes, pipes and hollow profiles "e.g., open seam, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless or welded tubes and pipes and tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm) 3 N/A 3 3,300 3,600 3,900 (C) 7307 Tube or pipe fittings "e.g. couplings, elbows, sleeves", of iron or steel see below see below see below see below see below see below   7307 11 Tube or pipe fittings of non-malleable cast iron 2,860 N/A 2,860 3,146 3,432 3,718   7307 19 10 Tube or pipe fittings of cast iron (excl. of non-malleable) 2,860 N/A 2,860 3,146 3,432 3,718   7307 19 90 Cast tube or pipe fittings of steel 3 N/A 3 3,300 3,600 3,900 (C) 7307 21 00 Flanges of stainless steel (excl. cast products) 2,910 N/A 2,910 3,201 3,492 3,783   7307 22 Threaded elbows, bends and sleeves of stainless steel (excl. cast products) 2,910 N/A 2,910 3,201 3,492 3,783   7307 23 Butt welding tube or pipe fittings of stainless steel (excl. cast products) 2,910 N/A 2,910 3,201 3,492 3,783   7307 29 Tube or pipe fittings of stainless steel (excl. cast products, flanges, threaded elbows, bends and sleeves and butt weldings fittings) 2,910 N/A 2,910 3,201 3,492 3,783   7307 91 00 Flanges of iron or steel (excl. cast or stainless products) 3 N/A 3 3,300 3,600 3,900 (C) 7307 92 Threaded elbows, bends and sleeves, of stainless steel (excl. cast or stainless products) 3 N/A 3 3,300 3,600 3,900 (C) 7307 93 Butt welding fittings of iron or steel (excl. cast iron or stainless steel products, and flanges) 3 N/A 3 3,300 3,600 3,900 (C) 7307 99 Tube or pipe fittings, of iron or steel (excl. cast iron or stainless steel products; flanges; threaded elbows, bends and sleeves; butt welding fittings) 3 N/A 3 3,300 3,600 3,900 (C) 7308 Structures and parts of structures "e.g., bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns", of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel (excl. prefabricated buildings of heading 9406) 3,020 N/A 3,020 3,322 3,624 3,926 (C) 7309 Reservoirs, tanks, vats and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of > 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated (excl. containers specifically constructed or equipped for one or more types of transport) 3 N/A 3 3,300 3,600 3,900 (C) 7310 Tanks, casks, drums, cans, boxes and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of <= 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated, n.e.s. 3 N/A 3 3,300 3,600 3,900 (C) 7311 Containers of iron or steel, for compressed or liquefied gas (excl. containers specifically constructed or equipped for one or more types of transport) see below see below see below see below see below see below   7311 00 Containers of iron or steel, for compressed or liquefied gas (excl. containers specifically constructed or equipped for one or more types of transport) 3 N/A 3 3,300 3,600 3,900 (C) 7318 Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers, incl. spring washers, and similar articles, of iron or steel (excl. lag screws, stoppers, plugs and the like, threaded) see below see below see below see below see below see below   7318 11 00 Coach screws of iron or steel 3 N/A 3 3,300 3,600 3,900 (C) 7318 12 10 Wood screws of stainless steel (excl. coach screws) 3,300 N/A 3,300 3,630 3,960 4,290 (C) 7318 12 90 Wood screws of iron or steel other than stainless (excl. coach screws) 3 N/A 3 3,300 3,600 3,900 (C) 7318 13 00 Screw hooks and screw rings, of iron or steel 3 N/A 3 3,300 3,600 3,900 (C) 7318 14 10 Self-tapping screws, of stainless steel (excl. wood screws) 3,300 N/A 3,300 3,630 3,960 4,290 (C) 7318 14 91 Spaced-thread screws of iron or steel other than stainless 3 N/A 3 3,300 3,600 3,900 (C) 7318 14 99 Self-tapping screws of iron or steel other than stainless (excl. spaced-thread screws and wood screws) 3 N/A 3 3,300 3,600 3,900 (C) 7318 15 Threaded screws and bolts, of iron or steel, whether or not with their nuts and washers (excl. coach screws and other wood screws, screw hooks and screw rings, self-tapping screws, lag screws, stoppers, plugs and the like, threaded) 3 N/A 3 3,300 3,600 3,900 (C) 7318 16 Nuts of iron or steel 3 N/A 3 3,300 3,600 3,900 (C) 7318 19 00 Threaded articles, of iron or steel, n.e.s. 3 N/A 3 3,300 3,600 3,900 (C) 7318 21 00 Spring washers and other lock washers, of iron or steel 3 N/A 3 3,300 3,600 3,900 (C) 7318 22 00 Washers of iron or steel (excl. spring washers and other lock washers) 3 N/A 3 3,300 3,600 3,900 (C) 7318 23 00 Rivets of iron or steel (excl. tubular and bifurcated rivets for particular uses) 3 N/A 3 3,300 3,600 3,900 (C) 7318 24 00 Cotters and cotter pins, of iron or steel 3 N/A 3 3,300 3,600 3,900 (C) 7318 29 00 Non-threaded articles, of iron or steel 3 N/A 3 3,300 3,600 3,900 (C) 7326 Articles of iron or steel, n.e.s. (excl. cast articles) see below see below see below see below see below see below   7326 11 00 Grinding balls and similar articles for mills, of iron or steel, forged or stamped, but not further worked 3 N/A 3 3,300 3,600 3,900 (C) 7326 19 Articles of iron or steel, forged or stamped, but not further worked, n.e.s. (excl. grinding balls and similar articles for mills) 3 N/A 3 3,300 3,600 3,900 (C) 7326 20 00 Articles of iron or steel wire, n.e.s. 3 N/A 3 3,300 3,600 3,900 (C) 7326 90 30 Ladders and steps, of iron or steel 3 N/A 3 3,300 3,600 3,900 (C) 7326 90 40 Pallets and similar platforms for handling goods, of iron or steel 3 N/A 3 3,300 3,600 3,900 (C) 7326 90 50 Reels for cables, piping and the like, of iron or steel 3 N/A 3 3,300 3,600 3,900 (C) 7326 90 60 Ventilators, non-mechanical, guttering, hooks and like articles used in the building industry, n.e.s., of iron or steel 3 N/A 3 3,300 3,600 3,900 (C) 7326 90 92 Articles of iron or steel, open-die forged, n.e.s. 3 N/A 3 3,300 3,600 3,900 (C) 7326 90 94 Articles of iron or steel, closed-die forged, n.e.s. 3 N/A 3 3,300 3,600 3,900 (C) 7326 90 96 Sintered articles of iron or steel, n.e.s. 3 N/A 3 3,300 3,600 3,900 (C) 7326 90 98 Articles of iron or steel, n.e.s. 3 N/A 3 3,300 3,600 3,900 (C) Angola Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay 0,220 0,040 0,250 0,275 0,300 0,325 (A) 2523 10 00 White clinker – – – _ _ _   2523 10 00 Grey clinker 1,240 0,020 1,260 1,386 1,525 1,677 (A) 2523 21 00 White Portland cement – – – _ _ _   2523 29 00 Grey Portland cement 1,240 0,030 1,270 1,397 1,537 1,690   2523 90 00 White hydraulic cements – – – _ _ _   2523 90 00 Grey hydraulic cements 1,180 0,040 1,220 1,342 1,476 1,624 (A) 2523 30 00 Aluminous cement – – – _ _ _   Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066   Iron and steel         10 % mark-up 20 % mark-up 30 % mark-up   2601 12 00 Agglomerated iron ores and concentrates (excl. roasted iron pyrites) 0,617 N/A 0,617 0,678 0,740 0,802   7202 11 Ferro-manganese, containing by weight > 2% of carbon 1,690 N/A 1,690 1,859 2,028 2,197   7202 41 Ferro-chromium, containing by weight > 4% of carbon 2,350 N/A 2,350 2,585 2,820 3,055   7202 60 00 Ferro-nickel 3,480 N/A 3,480 3,828 4,176 4,524   Argentina Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – _ _ _   2523 10 00 White clinker – – – _ _ _   2523 10 00 Grey clinker 0,870 0,030 0,900 0,990 1,089 1,198 (A) 2523 21 00 White Portland cement – – – _ _ _   2523 29 00 Grey Portland cement 0,870 0,050 0,920 1,012 1,113 1,225   2523 90 00 White hydraulic cements – – – _ _ _   2523 90 00 Grey hydraulic cements – – – _ _ _   2523 30 00 Aluminous cement – – – _ _ _   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 1,900 0,030 1,930 1,949 1,949 1,949   2814 10 00 Anhydrous ammonia 2,260 0,100 2,360 2,384 2,384 2,384   2814 20 00 Ammonia in aqueous solution 0,680 0,030 0,710 0,717 0,717 0,717   2834 21 00 Nitrate of potassium 1,680 0,050 1,730 1,747 1,747 1,747   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,510 0,020 0,530 0,535 0,535 0,535   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,840 0,020 0,860 0,869 0,869 0,869   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,530 0,080 1,600 1,616 1,616 1,616   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,500 0,070 1,570 1,586 1,586 1,586   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,660 0,050 0,720 0,727 0,727 0,727   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,190 0,060 1,250 1,263 1,263 1,263   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,280 0,050 1,320 1,333 1,333 1,333   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,970 0,070 2,040 2,060 2,060 2,060   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,700 0,070 1,760 1,778 1,778 1,778   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,700 0,070 1,760 1,778 1,778 1,778   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,970 0,050 3,020 3,050 3,050 3,050   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,650 0,060 1,710 1,727 1,727 1,727   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,360 0,060 1,420 1,434 1,434 1,434   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,490 0,070 1,560 1,576 1,576 1,576   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,700 0,060 0,760 0,768 0,768 0,768   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,860 0,060 0,920 0,929 0,929 0,929   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,580 0,050 0,630 0,636 0,636 0,636   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,530 0,040 0,570 0,576 0,576 0,576   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,340 0,030 0,370 0,374 0,374 0,374   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,160 0,080 1,240 1,252 1,252 1,252   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,610 0,080 0,690 0,697 0,697 0,697   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,130 0,050 1,180 1,192 1,192 1,192   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,580 0,040 0,620 0,626 0,626 0,626   Aluminium         10 % mark-up 20 % mark-up 30 % mark-up   7601 Unwrought aluminium 1,700 N/A 1,700 1,870 2,040 2,210 (K) 7603 Aluminium powders and flakes 1,810 N/A 1,810 1,991 2,172 2,353 (K) 7604 10 10 Bars and rods 2,030 N/A 2,030 2,233 2,436 2,639 (K) 7604 10 90 Profiles 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7604 21 00 Hollow profiles 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7604 29 10 Bars and rods 2,030 N/A 2,030 2,233 2,436 2,639 (K) 7604 29 90 Profiles 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7605 Aluminium wire 2,030 N/A 2,030 2,233 2,436 2,639 (K) 7606 Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7608 Aluminium tubes and pipes 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7609 00 00 Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7610 10 00 Doors, windows and their frames and thresholds for doors 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7610 90 Other 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7610 90 10 Bridges and bridge-sections, towers and lattice masts 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7610 90 90 Other 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7611 00 00 Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7612 Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7613 00 00 Aluminium containers for compressed or liquefied gas 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7614 Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated 2,030 N/A 2,030 2,233 2,436 2,639 (K) 7616 10 00 Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7616 91 00 Cloth, grill, netting and fencing, of aluminium wire 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7616 99 10 Cast 1,810 N/A 1,810 1,991 2,172 2,353 (K) 7616 99 90 Other 2,490 N/A 2,490 2,739 2,988 3,237 (K) Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066   Iron and steel         10 % mark-up 20 % mark-up 30 % mark-up   2601 12 00 Agglomerated iron ores and concentrates (excl. roasted iron pyrites) 0,140 0,050 0,200 0,220 0,240 0,260   7201 Pig iron and spiegeleisen, in pigs, blocks or other primary forms 2,300 N/A 2,300 2,530 2,760 2,990   7202 11 Ferro-manganese, containing by weight > 2% of carbon – N/A – _ _ _   7202 19 Ferro-manganese, containing by weight <= 2% carbon – N/A – _ _ _   7202 41 Ferro-chromium, containing by weight > 4% of carbon – N/A – _ _ _   7202 49 Ferro-chromium, containing by weight <= 4% of carbon – N/A – _ _ _   7202 60 00 Ferro-nickel – N/A – _ _ _   7203 Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99,94%, in lumps, pellets or similar forms 1,030 N/A 1,030 1,133 1,236 1,339   7205 Granules and powders of pig iron, spiegeleisen, iron or steel (excl. granules and powders of ferro-alloys, turnings and filings of iron or steel, radioactive iron powders "isotopes" and certain low-calibre, substandard balls for ballbearings) 2,370 N/A 2,370 2,607 2,844 3,081 (C) 7206 Iron and non-alloy steel in ingots or other primary forms (excl. remelting scrap ingots, products obtained by continuous casting and iron of heading 7203) see below see below see below see below see below see below   7206 10 00 Ingots, of iron and non-alloy steel (excl. remelted scrap ingots, continuous cast products, iron of heading 7203) 2,460 N/A 2,460 2,706 2,952 3,198 (C) 7206 90 00 Iron and non-alloy steel, in puddled bars or other primary forms (excl. ingots, remelted scrap ingots, continuous cast products, iron of heading 7203) 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7207 Semi-finished products of iron or non-alloy steel see below see below see below see below see below see below   7207 11 11 Semi-finished products, of non-alloy free-cutting steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7207 11 14 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness of <= 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel) 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7207 11 16 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness of > 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel) 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7207 11 90 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular cross-section, the width < twice the thickness, forged 2,460 N/A 2,460 2,706 2,952 3,198 (C) 7207 12 10 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtained by continuous casting 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7207 12 90 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular "other than square" cross-section, the width >= twice the thickness, forged 2,460 N/A 2,460 2,706 2,952 3,198 (C) 7207 19 12 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7207 19 19 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, forged 2,460 N/A 2,460 2,706 2,952 3,198 (C) 7207 19 80 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon (excl. semi-products, of square, rectangular, circular or polygonal cross-section) 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7207 20 11 Semi-finished products, of non-alloy free-cutting steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7207 20 15 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% but < 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel) 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7207 20 17 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel) 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7207 20 19 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, forged 2,460 N/A 2,460 2,706 2,952 3,198 (C) 7207 20 32 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtained by continuous casting 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7207 20 39 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of rectangular "other than square" cross-section and the width >= twice the thickness, forged 2,460 N/A 2,460 2,706 2,952 3,198 (C) 7207 20 52 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7207 20 59 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of circular or polygonal cross-section, forged 2,460 N/A 2,460 2,706 2,952 3,198 (C) 7207 20 80 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon (excl. those of square, rectangular, circular or polygonal cross-section) 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7208 Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled, not clad, plated or coated 2,590 N/A 2,590 2,849 3,108 3,367 (C) 7209 Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, cold-rolled "cold-reduced", not clad, plated or coated 2,680 N/A 2,680 2,948 3,216 3,484 (C) 7210 Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated 2,680 N/A 2,680 2,948 3,216 3,484 (C) 7211 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", not clad, plated or coated see below see below see below see below see below see below   7211 13 00 Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as "wide flats" 2,590 N/A 2,590 2,849 3,108 3,367 (C) 7211 14 00 Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, not further worked than hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm (excl. "wide flats") 2,590 N/A 2,590 2,849 3,108 3,367 (C) 7211 19 00 Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, simply hot-rolled, not clad, plated or coated, of a thickness < 4,75 mm (excl. "wide flats") 2,590 N/A 2,590 2,849 3,108 3,367 (C) 7211 23 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight < 0,25% of carbon 2,680 N/A 2,680 2,948 3,216 3,484 (C) 7211 29 00 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight >= 0,25% of carbon 2,680 N/A 2,680 2,948 3,216 3,484 (C) 7211 90 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked, but not clad, plated or coated 2,680 N/A 2,680 2,948 3,216 3,484 (C) 7212 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated 2,680 N/A 2,680 2,948 3,216 3,484 (C) 7213 Bars and rods of iron or non-alloy steel, hot-rolled, in irregularly wound coils 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7214 Bars and rods, of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but incl. those twisted after rolling (excl. in irregularly wound coils) see below see below see below see below see below see below   7214 10 00 Bars and rods, of iron or non-alloy steel, not further worked than forged (excl. in irregularly wound coils) 2,460 N/A 2,460 2,706 2,952 3,198 (C) 7214 20 00 Bars and rods, of iron or non-alloy steel, with indentations, ribs, groves or other deformations produced during the rolling process 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7214 30 00 Bars and rods, of non-alloy free-cutting steel, not further worked than hot-rolled, hot-drawn or hot-extruded (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling) 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7214 91 Bars and rods, of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, of rectangular "other than square" cross-section (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process, bars and rods twisted after rolling and free-cutting steel) 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7214 99 Bars and rods, of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded (excl. of rectangular [other than square] cross-section and those containing indentations, ribs, grooves or other deformations produced during the rolling process, and of non-alloy free-cutting steel) 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7215 Bars and rods, of iron or non-alloy steel, cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked, n.e.s. 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7216 Angles, shapes and sections of iron or non-alloy steel, n.e.s. 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7217 Wire of iron or non-alloy steel, in coils (excl. bars and rods) see below see below see below see below see below see below   7217 10 Wire of iron or non-alloy steel, in coils, not plated or coated, whether or not polished (excl. bars and rods) 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7217 20 Wire of iron or non-alloy steel, in coils, plated or coated with zinc (excl. bars and rods) 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7217 30 Wire of iron or non-alloy steel, in coils, plated or coated with base metals (excl. plated or coated with zinc, and bars and rods) 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7217 90 Wire of iron or non-alloy steel, in coils, plated or coated (excl. plated or coated with base metals, and bars and rods) 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7218 Stainless steel in ingots or other primary forms (excl. remelting scrap ingots and products obtained by continuous casting); semi-finished products of stainless steel see below see below see below see below see below see below   7218 10 00 Steel, stainless, in ingots and other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) 3,230 N/A 3,230 3,553 3,876 4,199   7218 91 Semi-finished products of stainless steel, of rectangular "other than square" cross-section 3,430 N/A 3,430 3,773 4,116 4,459   7218 99 11 Semi-finished products of stainless steel, of square cross-section, rolled or obtained by continuous casting 3,430 N/A 3,430 3,773 4,116 4,459   7218 99 19 Semi-finished products of stainless steel, of square cross-section, forged 3,230 N/A 3,230 3,553 3,876 4,199   7218 99 20 Semi-finished products of stainless steel, of circular cross-section or of cross-section other than square or rectangular, rolled or obtained by continuous casting 3,430 N/A 3,430 3,773 4,116 4,459   7218 99 80 Semi-finished products of stainless steel, forged (excl. products of square or rectangular cross-section) 3,230 N/A 3,230 3,553 3,876 4,199   7219 Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7219 11 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of > 10 mm 3,430 N/A 3,430 3,773 4,116 4,459   7219 12 Flat-rolled products of stainless steel, of a width of>= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 4,7 mm and <= 10 mm 3,430 N/A 3,430 3,773 4,116 4,459   7219 13 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 3 mm and < 4,75 mm 3,430 N/A 3,430 3,773 4,116 4,459   7219 14 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of < 3 mm 3,430 N/A 3,430 3,773 4,116 4,459   7219 21 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of > 10 mm 3,430 N/A 3,430 3,773 4,116 4,459   7219 22 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 4,75 mm and <= 10 mm 3,430 N/A 3,430 3,773 4,116 4,459   7219 23 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 3 mm and < 4,75 mm 3,430 N/A 3,430 3,773 4,116 4,459   7219 24 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of < 3 mm 3,430 N/A 3,430 3,773 4,116 4,459   7219 31 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 4,75 mm 3,520 N/A 3,520 3,872 4,224 4,576   7219 32 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 3 mm but < 4,75 mm 3,520 N/A 3,520 3,872 4,224 4,576   7219 33 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of > 1 mm but < 3 mm 3,520 N/A 3,520 3,872 4,224 4,576   7219 34 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 0,5 mm but <= 1 mm 3,520 N/A 3,520 3,872 4,224 4,576   7219 35 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of < 0,5 mm 3,520 N/A 3,520 3,872 4,224 4,576   7219 90 Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked 3,520 N/A 3,520 3,872 4,224 4,576   7220 Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7220 11 00 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of >= 4,75 mm 3,430 N/A 3,430 3,773 4,116 4,459   7220 12 00 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of < 4,75 mm 3,430 N/A 3,430 3,773 4,116 4,459   7220 20 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" 3,520 N/A 3,520 3,872 4,224 4,576   7220 90 Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked 3,520 N/A 3,520 3,872 4,224 4,576   7221 Bars and rods of stainless steel, hot-rolled, in irregularly wound coils 3,230 N/A 3,230 3,553 3,876 4,199   7222 Other bars and rods of stainless steel; angles, shapes and sections of stainless steel, n.e.s. see below see below see below see below see below see below   7222 11 Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only hot-extruded, of circular cross-section 3,230 N/A 3,230 3,553 3,876 4,199   7222 19 Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only extruded (excl. of circular cross-section) 3,230 N/A 3,230 3,553 3,876 4,199   7222 20 Other bars and rods of stainless steel, not further worked than cold-formed or cold-finished 3,230 N/A 3,230 3,553 3,876 4,199   7222 30 Other bars and rods of stainless steel, cold-formed or cold-finished and further worked, or not further worked than forged, or forged, or hot-formed by other means and further worked, n.e.s. 3,230 N/A 3,230 3,553 3,876 4,199   7222 40 Angles, shapes and sections of stainless steel, n.e.s. 3,230 N/A 3,230 3,553 3,876 4,199   7223 Wire of stainless steel, in coils (excl. bars and rods) see below see below see below see below see below see below   7223 00 Wire of stainless steel, in coils (excl. bars and rods) 3,230 N/A 3,230 3,553 3,876 4,199   7224 Steel, alloy, other than stainless, in ingots or other primary forms, semi-finished products of alloy steel other than stainless (excl. waste and scrap in ingot form, and products obtained by continuous casting) see below see below see below see below see below see below   7224 10 Steel, alloy, other than stainless, in ingots or other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) 3,140 N/A 3,140 3,454 3,768 4,082 (F) 7224 90 02 Semi-finished products of tool steel 3,340 N/A 3,340 3,674 4,008 4,342 (F) 7224 90 03 Semi-finished products of high-speed steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting the width measuring < twice the thickness 3,340 N/A 3,340 3,674 4,008 4,342 (F) 7224 90 05 Semi-finished products of steel containing by weight <= 0,7% of carbon, 0,5% to 1,2% of manganese, 0,6% to 2,3% of silicon, or of steel containing by weight >= 0,0008% of boron with any other element < the minimum content referred to in Note 1 f to chapter 72, of square or rectangular cross-section, hot rolled or obtained by continuous casting, the width measuring < twice the thickness 3,340 N/A 3,340 3,674 4,008 4,342 (F) 7224 90 07 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring < twice the thickness (excl. of tool steel, high-speed steel and articles of subheading 7224.90.05) 3,340 N/A 3,340 3,674 4,008 4,342 (F) 7224 90 14 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring >= twice the thickness (excl. of tool steel) 3,340 N/A 3,340 3,674 4,008 4,342 (F) 7224 90 18 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, forged (excl. of tool steel) 3,140 N/A 3,140 3,454 3,768 4,082 (F) 7224 90 31 Semi-finished products of steel containing by weight 0,9% to 1,15% carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting 3,340 N/A 3,340 3,674 4,008 4,342 (F) 7224 90 38 Semi-finished products of alloy steel, other than stainless steel, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting (excl. of tool steel and products containing by weight 0,9% to 1,15% of carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum) 3,340 N/A 3,340 3,674 4,008 4,342 (F) 7224 90 90 Semi-finished products of alloy steel, other than stainless steel, forged (excl. of tool steel and products of square or rectangular, circular or polygamol cross-section) 3,140 N/A 3,140 3,454 3,768 4,082 (F) 7225 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7225 11 00 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, grain-oriented 4,360 N/A 4,360 4,796 5,232 5,668 (C) 7225 19 10 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, hot-rolled 3,340 N/A 3,340 3,674 4,008 4,342 (C) 7225 19 90 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, cold-rolled "cold-reduced", non-grain-oriented 3,430 N/A 3,430 3,773 4,116 4,459 (F) 7225 30 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, in coils (excl. products of silicon-electrical steel) 3,340 N/A 3,340 3,674 4,008 4,342 (F) 7225 40 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, not in coils (excl. products of silicon-electrical steel) 3,340 N/A 3,340 3,674 4,008 4,342 (F) 7225 50 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of silicon-electrical steel) 3,430 N/A 3,430 3,773 4,116 4,459 (F) 7225 91 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and electrolytically plated or coated with zinc (excl. products of silicon-electrical steel) 3,430 N/A 3,430 3,773 4,116 4,459 (F) 7225 92 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and plated or coated with zinc (excl. electrolytically plated or coated and products of silicon-electrical steel) 3,430 N/A 3,430 3,773 4,116 4,459 (F) 7225 99 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. plated or coated with zinc and products of silicon-electrical steel) 3,430 N/A 3,430 3,773 4,116 4,459 (F) 7226 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7226 11 00 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", grain-oriented 4,360 N/A 4,360 4,796 5,232 5,668 (C) 7226 19 10 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, not further worked than hot-rolled 3,340 N/A 3,340 3,674 4,008 4,342 (C) 7226 19 80 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, cold-rolled "cold-reduced", whether or not further worked, or hot-rolled and further worked, non-grain-oriented 3,430 N/A 3,430 3,773 4,116 4,459 (F) 7226 20 00 Flat-rolled products of high-speed steel, of a width of <= 600 mm, hot-rolled or cold-rolled "cold-reduced" 3,340 N/A 3,340 3,674 4,008 4,342 (F) 7226 91 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than hot-rolled (excl. products of high-speed steel or silicon-electrical steel) 3,340 N/A 3,340 3,674 4,008 4,342 (F) 7226 92 00 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of high-speed steel or silicon-electrical steel) 3,430 N/A 3,430 3,773 4,116 4,459 (F) 7226 99 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. products of high-speed steel or silicon-electrical steel) 3,430 N/A 3,430 3,773 4,116 4,459 (F) 7227 Bars and rods of alloy steel other than stainless, hot-rolled, in irregularly wound coils 3,140 N/A 3,140 3,454 3,768 4,082 (C)/(F) 7228 Other bars and rods of alloy steel other than stainless, angles, shapes and sections of alloy steel other than stainless, n.e.s.; hollow drill bars and rods, of alloy or non-alloy steel see below see below see below see below see below see below   7228 10 20 Bars and rods of high-speed steel, not further worked than hot-rolled, hot-drawn or extruded, and hot-rolled, hot-drawn or extruded, not further worked than clad (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,140 N/A 3,140 3,454 3,768 4,082 (F) 7228 10 50 Bars and rods of high-speed steel, forged (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,140 N/A 3,140 3,454 3,768 4,082 (F) 7228 10 90 Bars and rods of high-speed steel, not further worked than cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked (excl. forged products, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,140 N/A 3,140 3,454 3,768 4,082 (F) 7228 20 Bars and rods of silico-manganese steel (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,140 N/A 3,140 3,454 3,768 4,082 (F) 7228 30 Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,140 N/A 3,140 3,454 3,768 4,082 (C)/(F) 7228 40 Bars and rods of alloy steel other than stainless, not further worked than forged (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,140 N/A 3,140 3,454 3,768 4,082 (F) 7228 50 Bars and rods of alloy steel other than stainless, not further worked than cold-formed or cold-finished (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,140 N/A 3,140 3,454 3,768 4,082 (C)/(F) 7228 60 Bars and rods of alloy steel other than stainless, cold-formed or cold-finished and further worked or hot-formed and further worked, n.e.s. (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,140 N/A 3,140 3,454 3,768 4,082 (F) 7228 70 Angles, shapes and sections of alloy steel other than stainless, n.e.s. 3,140 N/A 3,140 3,454 3,768 4,082 (F) 7228 80 00 Hollow drill bars and rods, of alloy or non-alloy steel 3,140 N/A 3,140 3,454 3,768 4,082 (F) 7229 Wire of alloy steel other than stainless, in coils (excl. bars and rods) 3,140 N/A 3,140 3,454 3,768 4,082 (C)/(F) 7301 Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel 2,680 N/A 2,680 2,948 3,216 3,484 (C) 7302 Railway or tramway track construction material of iron or steel, the following : rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers "cross-ties", fish-plates, chairs, chair wedges, sole plates "base plates", rail clips, bedplates, ties and other material specialised for jointing or fixing rails 2,980 N/A 2,980 3,278 3,576 3,874 (C) 7303 Tubes, pipes and hollow profiles, of cast iron see below see below see below see below see below see below   7303 00 Tubes, pipes and hollow profiles, of cast iron 2,350 N/A 2,350 2,585 2,820 3,055   7304 Tubes, pipes and hollow profiles, seamless, of iron or steel (excl. products of cast iron) see below see below see below see below see below see below   7304 11 00 Line pipe of a kind used for oil or gas pipelines, seamless, of stainless steel 3,230 N/A 3,230 3,553 3,876 4,199   7304 19 Line pipe of a kind used for oil or gas pipelines, seamless, of iron or steel (excl. products of stainless steel or of cast iron) 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7304 22 00 Drill pipe, seamless, of stainless steel, of a kind used in drilling for oil or gas 3,230 N/A 3,230 3,553 3,876 4,199   7304 23 00 Drill pipe, seamless, of a kind used in drilling for oil or gas, of iron or steel (excl. products of stainless steel or of cast iron) 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7304 24 00 Casing and tubing, seamless, of a kind used for drilling for oil or gas, of stainless steel 3,230 N/A 3,230 3,553 3,876 4,199   7304 29 Casing and tubing, seamless, of iron or steel, of a kind used in drilling for oil or gas (excl. products of cast iron) 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7304 31 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" (excl. cast iron products and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used for drilling for oil or gas) 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7304 39 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, not cold-drawn or cold-rolled "cold-reduced" (excl. cast iron products, line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas) 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7304 41 00 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas) 3,230 N/A 3,230 3,553 3,876 4,199   7304 49 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines or of a kind used for drilling for oil or gas) 3,230 N/A 3,230 3,553 3,876 4,199   7304 51 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil) 2,400 N/A 2,400 2,640 2,880 3,120 (F) 7304 59 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil) 2,400 N/A 2,400 2,640 2,880 3,120 (C)/(F) 7304 90 00 Tubes, pipes and hollow profiles, seamless, of non-circular cross-section, of iron or steel (excl. products of cast iron) 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7305 Tubes and pipes, having circular cross-sections and an external diameter of > 406,4 mm, of flat-rolled products of iron or steel "e.g., welded, riveted or similarly closed" 2,680 N/A 2,680 2,948 3,216 3,484 (C) 7306 Tubes, pipes and hollow profiles "e.g., open seam or welded, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless tubes and pipes and tubes having internal and external circular cross-sections and an external diameter of > 406,4 mm) see below see below see below see below see below see below   7306 11 00 Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm 3,520 N/A 3,520 3,872 4,224 4,576   7306 19 00 Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron) 2,680 N/A 2,680 2,948 3,216 3,484 (C) 7306 21 00 Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm 3,520 N/A 3,520 3,872 4,224 4,576   7306 29 00 Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron) 2,680 N/A 2,680 2,948 3,216 3,484 (C) 7306 30 12 Precision tubes, welded, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" 2,680 N/A 2,680 2,948 3,216 3,484 (C) 7306 30 18 Precision tubes, welded, of circular cross-section, of iron or non-alloy steel (excl. cold-drawn or cold-rolled) 2,590 N/A 2,590 2,849 3,108 3,367   7306 30 41 Threaded or threadable tubes "gas pipe", welded, of circular cross-section, of iron or non-alloy steel, plated or coated with zinc 2,680 N/A 2,680 2,948 3,216 3,484 (C) 7306 30 49 Threaded or threadable tubes "gas pipe", welded, of circular cross-section, of iron or non-alloy steel (excl. products plated or coated with zinc) 2,680 N/A 2,680 2,948 3,216 3,484 (C) 7306 30 72 Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel, of an external diameter of <= 168,3 mm, plated or coated with zinc (excl. line pipe of a kind used for oil or gas pipelines or casing and tubingof a kind used in drilling for oil or gas) 2,680 N/A 2,680 2,948 3,216 3,484 (C) 7306 30 77 Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel of an external diameter of <= 168,3 mm (excl. plated or coated with zinc and line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used in drilling for oil or gas, precision tubes and threaded or threadable tubes "gas pipe") 2,680 N/A 2,680 2,948 3,216 3,484 (C) 7306 30 80 Tubes, pipes and hollow profiles, welded, having a circular cross-section, of iron or steel, of an external diameter of > 168,3 mm but <= 406,4 mm (excl. line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, or precision steel tubes, electrical conduit tubes or threaded or threadable tubes "gas pipe") 2,680 N/A 2,680 2,948 3,216 3,484 (C) 7306 40 20 Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. products having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) 3,520 N/A 3,520 3,872 4,224 4,576   7306 40 80 Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel (excl. products cold-drawn or cold-rolled "cold-reduced", tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) 3,430 N/A 3,430 3,773 4,116 4,459   7306 50 21 Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" 2,720 N/A 2,720 2,992 3,264 3,536 (F) 7306 50 29 Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless (excl. cold-drawn or cold-rolled) 2,630 N/A 2,630 2,893 3,156 3,419 (F) 7306 50 80 Tubes, pipes and hollow profiles, welded, of circular cross-section, of alloy steel other than stainless (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and precision steel tubes) 2,720 N/A 2,720 2,992 3,264 3,536 (F) 7306 61 10 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel 3,520 N/A 3,520 3,872 4,224 4,576   7306 61 92 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of <= 2 mm 2,680 N/A 2,680 2,948 3,216 3,484 (C) 7306 61 99 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of > 2 mm 2,680 N/A 2,680 2,948 3,216 3,484 (C) 7306 69 10 Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) 3,520 N/A 3,520 3,872 4,224 4,576   7306 69 90 Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of iron or steel other than stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) 2,680 N/A 2,680 2,948 3,216 3,484 (C) 7306 90 00 Tubes, pipes and hollow profiles "e.g., open seam, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless or welded tubes and pipes and tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm) 2,680 N/A 2,680 2,948 3,216 3,484 (C) 7307 Tube or pipe fittings "e.g. couplings, elbows, sleeves", of iron or steel see below see below see below see below see below see below   7307 11 Tube or pipe fittings of non-malleable cast iron 2,340 N/A 2,340 2,574 2,808 3,042   7307 19 10 Tube or pipe fittings of cast iron (excl. of non-malleable) 2,340 N/A 2,340 2,574 2,808 3,042   7307 19 90 Cast tube or pipe fittings of steel 2,460 N/A 2,460 2,706 2,952 3,198 (C) 7307 21 00 Flanges of stainless steel (excl. cast products) 2,410 N/A 2,410 2,651 2,892 3,133   7307 22 Threaded elbows, bends and sleeves of stainless steel (excl. cast products) 2,410 N/A 2,410 2,651 2,892 3,133   7307 23 Butt welding tube or pipe fittings of stainless steel (excl. cast products) 2,410 N/A 2,410 2,651 2,892 3,133   7307 29 Tube or pipe fittings of stainless steel (excl. cast products, flanges, threaded elbows, bends and sleeves and butt weldings fittings) 2,410 N/A 2,410 2,651 2,892 3,133   7307 91 00 Flanges of iron or steel (excl. cast or stainless products) 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7307 92 Threaded elbows, bends and sleeves, of stainless steel (excl. cast or stainless products) 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7307 93 Butt welding fittings of iron or steel (excl. cast iron or stainless steel products, and flanges) 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7307 99 Tube or pipe fittings, of iron or steel (excl. cast iron or stainless steel products; flanges; threaded elbows, bends and sleeves; butt welding fittings) 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7308 Structures and parts of structures "e.g., bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns", of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel (excl. prefabricated buildings of heading 9406) 3,010 N/A 3,010 3,311 3,612 3,913 (C) 7309 Reservoirs, tanks, vats and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of > 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated (excl. containers specifically constructed or equipped for one or more types of transport) 3,010 N/A 3,010 3,311 3,612 3,913 (C) 7310 Tanks, casks, drums, cans, boxes and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of <= 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated, n.e.s. 2,680 N/A 2,680 2,948 3,216 3,484 (C) 7311 Containers of iron or steel, for compressed or liquefied gas (excl. containers specifically constructed or equipped for one or more types of transport) see below see below see below see below see below see below   7311 00 Containers of iron or steel, for compressed or liquefied gas (excl. containers specifically constructed or equipped for one or more types of transport) 2,630 N/A 2,630 2,893 3,156 3,419 (C) 7318 Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers, incl. spring washers, and similar articles, of iron or steel (excl. lag screws, stoppers, plugs and the like, threaded) see below see below see below see below see below see below   7318 11 00 Coach screws of iron or steel 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7318 12 10 Wood screws of stainless steel (excl. coach screws) 3,230 N/A 3,230 3,553 3,876 4,199 (C) 7318 12 90 Wood screws of iron or steel other than stainless (excl. coach screws) 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7318 13 00 Screw hooks and screw rings, of iron or steel 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7318 14 10 Self-tapping screws, of stainless steel (excl. wood screws) 3,230 N/A 3,230 3,553 3,876 4,199 (C) 7318 14 91 Spaced-thread screws of iron or steel other than stainless 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7318 14 99 Self-tapping screws of iron or steel other than stainless (excl. spaced-thread screws and wood screws) 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7318 15 Threaded screws and bolts, of iron or steel, whether or not with their nuts and washers (excl. coach screws and other wood screws, screw hooks and screw rings, self-tapping screws, lag screws, stoppers, plugs and the like, threaded) 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7318 16 Nuts of iron or steel 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7318 19 00 Threaded articles, of iron or steel, n.e.s. 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7318 21 00 Spring washers and other lock washers, of iron or steel 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7318 22 00 Washers of iron or steel (excl. spring washers and other lock washers) 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7318 23 00 Rivets of iron or steel (excl. tubular and bifurcated rivets for particular uses) 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7318 24 00 Cotters and cotter pins, of iron or steel 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7318 29 00 Non-threaded articles, of iron or steel 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7326 Articles of iron or steel, n.e.s. (excl. cast articles) see below see below see below see below see below see below   7326 11 00 Grinding balls and similar articles for mills, of iron or steel, forged or stamped, but not further worked 2,460 N/A 2,460 2,706 2,952 3,198 (C) 7326 19 Articles of iron or steel, forged or stamped, but not further worked, n.e.s. (excl. grinding balls and similar articles for mills) 2,460 N/A 2,460 2,706 2,952 3,198 (C) 7326 20 00 Articles of iron or steel wire, n.e.s. 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7326 90 30 Ladders and steps, of iron or steel 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7326 90 40 Pallets and similar platforms for handling goods, of iron or steel 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7326 90 50 Reels for cables, piping and the like, of iron or steel 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7326 90 60 Ventilators, non-mechanical, guttering, hooks and like articles used in the building industry, n.e.s., of iron or steel 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7326 90 92 Articles of iron or steel, open-die forged, n.e.s. 2,460 N/A 2,460 2,706 2,952 3,198 (C) 7326 90 94 Articles of iron or steel, closed-die forged, n.e.s. 2,460 N/A 2,460 2,706 2,952 3,198 (C) 7326 90 96 Sintered articles of iron or steel, n.e.s. 2,460 N/A 2,460 2,706 2,952 3,198 (C) 7326 90 98 Articles of iron or steel, n.e.s. 2,680 N/A 2,680 2,948 3,216 3,484 (C) Armenia Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – _ _ _   2523 10 00 White clinker – – – _ _ _   2523 10 00 Grey clinker 1,360 0,010 1,370 1,507 1,644 1,781 (A) 2523 21 00 White Portland cement – – – _ _ _   2523 29 00 Grey Portland cement 1,320 0,020 1,350 1,485 1,620 1,755   2523 90 00 White hydraulic cements – – – _ _ _   2523 90 00 Grey hydraulic cements 1,260 0,030 1,280 1,408 1,536 1,664 (A) 2523 30 00 Aluminous cement – – – _ _ _   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 2,750 0,020 2,770 2,798 2,798 2,798   2814 10 00 Anhydrous ammonia – – – _ _ _   2814 20 00 Ammonia in aqueous solution 0,650 0,020 0,660 0,667 0,667 0,667   2834 21 00 Nitrate of potassium 2,220 0,020 2,250 2,273 2,273 2,273   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,490 0,010 0,500 0,505 0,505 0,505   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,810 0,010 0,820 0,828 0,828 0,828   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,470 0,040 1,510 1,525 1,525 1,525   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,440 0,040 1,480 1,495 1,495 1,495   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,640 0,030 0,660 0,667 0,667 0,667   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,420 0,030 1,460 1,475 1,475 1,475   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,680 0,030 1,710 1,727 1,727 1,727   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,590 0,040 2,620 2,646 2,646 2,646   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,220 0,040 2,250 2,273 2,273 2,273   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,220 0,040 2,250 2,273 2,273 2,273   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 4,300 0,030 4,330 4,373 4,373 4,373   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,170 0,030 2,200 2,222 2,222 2,222   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,620 0,030 1,650 1,667 1,667 1,667   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,660 0,040 1,700 1,717 1,717 1,717   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,820 0,030 0,850 0,859 0,859 0,859   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,080 0,040 1,120 1,131 1,131 1,131   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,740 0,030 0,760 0,768 0,768 0,768   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,510 0,020 0,530 0,535 0,535 0,535   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,320 0,020 0,340 0,343 0,343 0,343   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,490 0,040 1,540 1,555 1,555 1,555   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,590 0,060 0,650 0,657 0,657 0,657   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,460 0,030 1,480 1,495 1,495 1,495   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,750 0,020 0,770 0,778 0,778 0,778   Australia Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – _ _ _   2523 10 00 White clinker – – – _ _ _   2523 10 00 Grey clinker 1,380 0,040 1,420 1,562 1,704 1,846 (A) 2523 21 00 White Portland cement – – – _ _ _   2523 29 00 Grey Portland cement 1,100 0,070 1,170 1,287 1,404 1,521   2523 90 00 White hydraulic cements – – – _ _ _   2523 90 00 Grey hydraulic cements 1,040 0,080 1,120 1,232 1,344 1,456 (A) 2523 30 00 Aluminous cement – – – _ _ _   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 1,370 0,050 1,420 1,434 1,434 1,434   2814 10 00 Anhydrous ammonia 1,770 0,150 1,920 1,939 1,939 1,939   2814 20 00 Ammonia in aqueous solution 0,530 0,040 0,580 0,586 0,586 0,586   2834 21 00 Nitrate of potassium 1,240 0,080 1,320 1,333 1,333 1,333   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,410 0,040 0,450 0,455 0,455 0,455   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,690 0,040 0,730 0,737 0,737 0,737   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,250 0,120 1,370 1,384 1,384 1,384   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,220 0,120 1,340 1,353 1,353 1,353   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,540 0,100 0,630 0,636 0,636 0,636   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 0,910 0,110 1,020 1,030 1,030 1,030   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 0,950 0,080 1,030 1,040 1,040 1,040   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,460 0,120 1,590 1,606 1,606 1,606   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,280 0,120 1,390 1,404 1,404 1,404   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,280 0,120 1,390 1,404 1,404 1,404   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,140 0,080 2,210 2,232 2,232 2,232   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,230 0,110 1,340 1,353 1,353 1,353   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,050 0,100 1,140 1,151 1,151 1,151   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,170 0,120 1,290 1,303 1,303 1,303   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,550 0,100 0,650 0,657 0,657 0,657   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,650 0,120 0,770 0,778 0,778 0,778   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,450 0,090 0,540 0,545 0,545 0,545   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,420 0,070 0,490 0,495 0,495 0,495   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,270 0,060 0,330 0,333 0,333 0,333   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 0,880 0,150 1,030 1,040 1,040 1,040   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,500 0,120 0,620 0,626 0,626 0,626   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,840 0,090 0,930 0,939 0,939 0,939   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,440 0,060 0,500 0,505 0,505 0,505   Aluminium         10 % mark-up 20 % mark-up 30 % mark-up   7601 Unwrought aluminium 1,700 N/A 1,700 1,870 2,040 2,210 (K) 7603 Aluminium powders and flakes 1,810 N/A 1,810 1,991 2,172 2,353 (K) 7604 10 10 Bars and rods 2,030 N/A 2,030 2,233 2,436 2,639 (K) 7604 10 90 Profiles 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7604 21 00 Hollow profiles 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7604 29 10 Bars and rods 2,030 N/A 2,030 2,233 2,436 2,639 (K) 7604 29 90 Profiles 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7605 Aluminium wire 2,030 N/A 2,030 2,233 2,436 2,639 (K) 7606 Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7608 Aluminium tubes and pipes 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7609 00 00 Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7610 10 00 Doors, windows and their frames and thresholds for doors 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7610 90 Other 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7610 90 10 Bridges and bridge-sections, towers and lattice masts 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7610 90 90 Other 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7611 00 00 Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7612 Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7613 00 00 Aluminium containers for compressed or liquefied gas 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7614 Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated 2,030 N/A 2,030 2,233 2,436 2,639 (K) 7616 10 00 Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7616 91 00 Cloth, grill, netting and fencing, of aluminium wire 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7616 99 10 Cast 1,810 N/A 1,810 1,991 2,172 2,353 (K) 7616 99 90 Other 2,490 N/A 2,490 2,739 2,988 3,237 (K) Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066   Iron and steel         10 % mark-up 20 % mark-up 30 % mark-up   2601 12 00 Agglomerated iron ores and concentrates (excl. roasted iron pyrites) 0,070 0,020 0,090 0,099 0,108 0,117   7201 Pig iron and spiegeleisen, in pigs, blocks or other primary forms 2,790 N/A 2,790 3,069 3,348 3,627   7202 11 Ferro-manganese, containing by weight > 2% of carbon 1,690 N/A 1,690 1,859 2,028 2,197   7202 19 Ferro-manganese, containing by weight <= 2% carbon – N/A – _ _ _   7202 41 Ferro-chromium, containing by weight > 4% of carbon 2,350 N/A 2,350 2,585 2,820 3,055   7202 49 Ferro-chromium, containing by weight <= 4% of carbon – N/A – _ _ _   7202 60 00 Ferro-nickel 3,480 N/A 3,480 3,828 4,176 4,524   7203 Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99,94%, in lumps, pellets or similar forms – N/A – _ _ _   7205 Granules and powders of pig iron, spiegeleisen, iron or steel (excl. granules and powders of ferro-alloys, turnings and filings of iron or steel, radioactive iron powders "isotopes" and certain low-calibre, substandard balls for ballbearings) 2,810 N/A 2,810 3,091 3,372 3,653 (C) 7206 Iron and non-alloy steel in ingots or other primary forms (excl. remelting scrap ingots, products obtained by continuous casting and iron of heading 7203) see below see below see below see below see below see below   7206 10 00 Ingots, of iron and non-alloy steel (excl. remelted scrap ingots, continuous cast products, iron of heading 7203) 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7206 90 00 Iron and non-alloy steel, in puddled bars or other primary forms (excl. ingots, remelted scrap ingots, continuous cast products, iron of heading 7203) 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7207 Semi-finished products of iron or non-alloy steel see below see below see below see below see below see below   7207 11 11 Semi-finished products, of non-alloy free-cutting steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7207 11 14 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness of <= 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel) 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7207 11 16 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness of > 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel) 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7207 11 90 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular cross-section, the width < twice the thickness, forged 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7207 12 10 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtained by continuous casting 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7207 12 90 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular "other than square" cross-section, the width >= twice the thickness, forged 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7207 19 12 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7207 19 19 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, forged 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7207 19 80 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon (excl. semi-products, of square, rectangular, circular or polygonal cross-section) 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7207 20 11 Semi-finished products, of non-alloy free-cutting steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7207 20 15 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% but < 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel) 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7207 20 17 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel) 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7207 20 19 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, forged 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7207 20 32 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtained by continuous casting 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7207 20 39 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of rectangular "other than square" cross-section and the width >= twice the thickness, forged 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7207 20 52 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7207 20 59 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of circular or polygonal cross-section, forged 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7207 20 80 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon (excl. those of square, rectangular, circular or polygonal cross-section) 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7208 Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled, not clad, plated or coated 2,970 N/A 2,970 3,267 3,564 3,861 (C) 7209 Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, cold-rolled "cold-reduced", not clad, plated or coated 3 N/A 3 3,300 3,600 3,900 (C) 7210 Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated 3 N/A 3 3,300 3,600 3,900 (C) 7211 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", not clad, plated or coated see below see below see below see below see below see below   7211 13 00 Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as "wide flats" 2,970 N/A 2,970 3,267 3,564 3,861 (C) 7211 14 00 Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, not further worked than hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm (excl. "wide flats") 2,970 N/A 2,970 3,267 3,564 3,861 (C) 7211 19 00 Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, simply hot-rolled, not clad, plated or coated, of a thickness < 4,75 mm (excl. "wide flats") 2,970 N/A 2,970 3,267 3,564 3,861 (C) 7211 23 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight < 0,25% of carbon 3 N/A 3 3,300 3,600 3,900 (C) 7211 29 00 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight >= 0,25% of carbon 3 N/A 3 3,300 3,600 3,900 (C) 7211 90 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked, but not clad, plated or coated 3 N/A 3 3,300 3,600 3,900 (C) 7212 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated 3 N/A 3 3,300 3,600 3,900 (C) 7213 Bars and rods of iron or non-alloy steel, hot-rolled, in irregularly wound coils 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7214 Bars and rods, of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but incl. those twisted after rolling (excl. in irregularly wound coils) see below see below see below see below see below see below   7214 10 00 Bars and rods, of iron or non-alloy steel, not further worked than forged (excl. in irregularly wound coils) 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7214 20 00 Bars and rods, of iron or non-alloy steel, with indentations, ribs, groves or other deformations produced during the rolling process 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7214 30 00 Bars and rods, of non-alloy free-cutting steel, not further worked than hot-rolled, hot-drawn or hot-extruded (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling) 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7214 91 Bars and rods, of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, of rectangular "other than square" cross-section (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process, bars and rods twisted after rolling and free-cutting steel) 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7214 99 Bars and rods, of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded (excl. of rectangular [other than square] cross-section and those containing indentations, ribs, grooves or other deformations produced during the rolling process, and of non-alloy free-cutting steel) 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7215 Bars and rods, of iron or non-alloy steel, cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked, n.e.s. 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7216 Angles, shapes and sections of iron or non-alloy steel, n.e.s. 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7217 Wire of iron or non-alloy steel, in coils (excl. bars and rods) see below see below see below see below see below see below   7217 10 Wire of iron or non-alloy steel, in coils, not plated or coated, whether or not polished (excl. bars and rods) 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7217 20 Wire of iron or non-alloy steel, in coils, plated or coated with zinc (excl. bars and rods) 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7217 30 Wire of iron or non-alloy steel, in coils, plated or coated with base metals (excl. plated or coated with zinc, and bars and rods) 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7217 90 Wire of iron or non-alloy steel, in coils, plated or coated (excl. plated or coated with base metals, and bars and rods) 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7218 Stainless steel in ingots or other primary forms (excl. remelting scrap ingots and products obtained by continuous casting); semi-finished products of stainless steel see below see below see below see below see below see below   7218 10 00 Steel, stainless, in ingots and other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) 3,520 N/A 3,520 3,872 4,224 4,576   7218 91 Semi-finished products of stainless steel, of rectangular "other than square" cross-section 3,600 N/A 3,600 3,960 4,320 4,680   7218 99 11 Semi-finished products of stainless steel, of square cross-section, rolled or obtained by continuous casting 3,600 N/A 3,600 3,960 4,320 4,680   7218 99 19 Semi-finished products of stainless steel, of square cross-section, forged 3,520 N/A 3,520 3,872 4,224 4,576   7218 99 20 Semi-finished products of stainless steel, of circular cross-section or of cross-section other than square or rectangular, rolled or obtained by continuous casting 3,600 N/A 3,600 3,960 4,320 4,680   7218 99 80 Semi-finished products of stainless steel, forged (excl. products of square or rectangular cross-section) 3,520 N/A 3,520 3,872 4,224 4,576   7219 Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7219 11 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of > 10 mm 3,600 N/A 3,600 3,960 4,320 4,680   7219 12 Flat-rolled products of stainless steel, of a width of>= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 4,7 mm and <= 10 mm 3,600 N/A 3,600 3,960 4,320 4,680   7219 13 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 3 mm and < 4,75 mm 3,600 N/A 3,600 3,960 4,320 4,680   7219 14 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of < 3 mm 3,600 N/A 3,600 3,960 4,320 4,680   7219 21 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of > 10 mm 3,600 N/A 3,600 3,960 4,320 4,680   7219 22 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 4,75 mm and <= 10 mm 3,600 N/A 3,600 3,960 4,320 4,680   7219 23 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 3 mm and < 4,75 mm 3,600 N/A 3,600 3,960 4,320 4,680   7219 24 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of < 3 mm 3,600 N/A 3,600 3,960 4,320 4,680   7219 31 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 4,75 mm 3,630 N/A 3,630 3,993 4,356 4,719   7219 32 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 3 mm but < 4,75 mm 3,630 N/A 3,630 3,993 4,356 4,719   7219 33 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of > 1 mm but < 3 mm 3,630 N/A 3,630 3,993 4,356 4,719   7219 34 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 0,5 mm but <= 1 mm 3,630 N/A 3,630 3,993 4,356 4,719   7219 35 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of < 0,5 mm 3,630 N/A 3,630 3,993 4,356 4,719   7219 90 Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked 3,630 N/A 3,630 3,993 4,356 4,719   7220 Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7220 11 00 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of >= 4,75 mm 3,600 N/A 3,600 3,960 4,320 4,680   7220 12 00 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of < 4,75 mm 3,600 N/A 3,600 3,960 4,320 4,680   7220 20 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" 3,630 N/A 3,630 3,993 4,356 4,719   7220 90 Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked 3,630 N/A 3,630 3,993 4,356 4,719   7221 Bars and rods of stainless steel, hot-rolled, in irregularly wound coils 3,520 N/A 3,520 3,872 4,224 4,576   7222 Other bars and rods of stainless steel; angles, shapes and sections of stainless steel, n.e.s. see below see below see below see below see below see below   7222 11 Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only hot-extruded, of circular cross-section 3,520 N/A 3,520 3,872 4,224 4,576   7222 19 Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only extruded (excl. of circular cross-section) 3,520 N/A 3,520 3,872 4,224 4,576   7222 20 Other bars and rods of stainless steel, not further worked than cold-formed or cold-finished 3,520 N/A 3,520 3,872 4,224 4,576   7222 30 Other bars and rods of stainless steel, cold-formed or cold-finished and further worked, or not further worked than forged, or forged, or hot-formed by other means and further worked, n.e.s. 3,520 N/A 3,520 3,872 4,224 4,576   7222 40 Angles, shapes and sections of stainless steel, n.e.s. 3,520 N/A 3,520 3,872 4,224 4,576   7223 Wire of stainless steel, in coils (excl. bars and rods) see below see below see below see below see below see below   7223 00 Wire of stainless steel, in coils (excl. bars and rods) 3,520 N/A 3,520 3,872 4,224 4,576   7224 Steel, alloy, other than stainless, in ingots or other primary forms, semi-finished products of alloy steel other than stainless (excl. waste and scrap in ingot form, and products obtained by continuous casting) see below see below see below see below see below see below   7224 10 Steel, alloy, other than stainless, in ingots or other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) 3,530 N/A 3,530 3,883 4,236 4,589 (F) 7224 90 02 Semi-finished products of tool steel 3,610 N/A 3,610 3,971 4,332 4,693 (F) 7224 90 03 Semi-finished products of high-speed steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting the width measuring < twice the thickness 3,610 N/A 3,610 3,971 4,332 4,693 (F) 7224 90 05 Semi-finished products of steel containing by weight <= 0,7% of carbon, 0,5% to 1,2% of manganese, 0,6% to 2,3% of silicon, or of steel containing by weight >= 0,0008% of boron with any other element < the minimum content referred to in Note 1 f to chapter 72, of square or rectangular cross-section, hot rolled or obtained by continuous casting, the width measuring < twice the thickness 3,610 N/A 3,610 3,971 4,332 4,693 (F) 7224 90 07 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring < twice the thickness (excl. of tool steel, high-speed steel and articles of subheading 7224.90.05) 3,610 N/A 3,610 3,971 4,332 4,693 (F) 7224 90 14 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring >= twice the thickness (excl. of tool steel) 3,610 N/A 3,610 3,971 4,332 4,693 (F) 7224 90 18 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, forged (excl. of tool steel) 3,530 N/A 3,530 3,883 4,236 4,589 (F) 7224 90 31 Semi-finished products of steel containing by weight 0,9% to 1,15% carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting 3,610 N/A 3,610 3,971 4,332 4,693 (F) 7224 90 38 Semi-finished products of alloy steel, other than stainless steel, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting (excl. of tool steel and products containing by weight 0,9% to 1,15% of carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum) 3,610 N/A 3,610 3,971 4,332 4,693 (F) 7224 90 90 Semi-finished products of alloy steel, other than stainless steel, forged (excl. of tool steel and products of square or rectangular, circular or polygamol cross-section) 3,530 N/A 3,530 3,883 4,236 4,589 (F) 7225 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7225 11 00 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, grain-oriented 4,760 N/A 4,760 5,236 5,712 6,188 (C) 7225 19 10 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, hot-rolled 3,610 N/A 3,610 3,971 4,332 4,693 (C) 7225 19 90 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, cold-rolled "cold-reduced", non-grain-oriented 3,650 N/A 3,650 4,015 4,380 4,745 (F) 7225 30 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, in coils (excl. products of silicon-electrical steel) 3,610 N/A 3,610 3,971 4,332 4,693 (F) 7225 40 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, not in coils (excl. products of silicon-electrical steel) 3,610 N/A 3,610 3,971 4,332 4,693 (F) 7225 50 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of silicon-electrical steel) 3,650 N/A 3,650 4,015 4,380 4,745 (F) 7225 91 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and electrolytically plated or coated with zinc (excl. products of silicon-electrical steel) 3,650 N/A 3,650 4,015 4,380 4,745 (F) 7225 92 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and plated or coated with zinc (excl. electrolytically plated or coated and products of silicon-electrical steel) 3,650 N/A 3,650 4,015 4,380 4,745 (F) 7225 99 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. plated or coated with zinc and products of silicon-electrical steel) 3,650 N/A 3,650 4,015 4,380 4,745 (F) 7226 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7226 11 00 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", grain-oriented 4,760 N/A 4,760 5,236 5,712 6,188 (C) 7226 19 10 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, not further worked than hot-rolled 3,610 N/A 3,610 3,971 4,332 4,693 (C) 7226 19 80 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, cold-rolled "cold-reduced", whether or not further worked, or hot-rolled and further worked, non-grain-oriented 3,650 N/A 3,650 4,015 4,380 4,745 (F) 7226 20 00 Flat-rolled products of high-speed steel, of a width of <= 600 mm, hot-rolled or cold-rolled "cold-reduced" 3,610 N/A 3,610 3,971 4,332 4,693 (F) 7226 91 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than hot-rolled (excl. products of high-speed steel or silicon-electrical steel) 3,610 N/A 3,610 3,971 4,332 4,693 (F) 7226 92 00 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of high-speed steel or silicon-electrical steel) 3,650 N/A 3,650 4,015 4,380 4,745 (F) 7226 99 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. products of high-speed steel or silicon-electrical steel) 3,650 N/A 3,650 4,015 4,380 4,745 (F) 7227 Bars and rods of alloy steel other than stainless, hot-rolled, in irregularly wound coils 3,530 N/A 3,530 3,883 4,236 4,589 (C)/(F) 7228 Other bars and rods of alloy steel other than stainless, angles, shapes and sections of alloy steel other than stainless, n.e.s.; hollow drill bars and rods, of alloy or non-alloy steel see below see below see below see below see below see below   7228 10 20 Bars and rods of high-speed steel, not further worked than hot-rolled, hot-drawn or extruded, and hot-rolled, hot-drawn or extruded, not further worked than clad (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,530 N/A 3,530 3,883 4,236 4,589 (F) 7228 10 50 Bars and rods of high-speed steel, forged (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,530 N/A 3,530 3,883 4,236 4,589 (F) 7228 10 90 Bars and rods of high-speed steel, not further worked than cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked (excl. forged products, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,530 N/A 3,530 3,883 4,236 4,589 (F) 7228 20 Bars and rods of silico-manganese steel (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,530 N/A 3,530 3,883 4,236 4,589 (F) 7228 30 Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,530 N/A 3,530 3,883 4,236 4,589 (C)/(F) 7228 40 Bars and rods of alloy steel other than stainless, not further worked than forged (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,530 N/A 3,530 3,883 4,236 4,589 (F) 7228 50 Bars and rods of alloy steel other than stainless, not further worked than cold-formed or cold-finished (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,530 N/A 3,530 3,883 4,236 4,589 (C)/(F) 7228 60 Bars and rods of alloy steel other than stainless, cold-formed or cold-finished and further worked or hot-formed and further worked, n.e.s. (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,530 N/A 3,530 3,883 4,236 4,589 (F) 7228 70 Angles, shapes and sections of alloy steel other than stainless, n.e.s. 3,530 N/A 3,530 3,883 4,236 4,589 (F) 7228 80 00 Hollow drill bars and rods, of alloy or non-alloy steel 3,530 N/A 3,530 3,883 4,236 4,589 (F) 7229 Wire of alloy steel other than stainless, in coils (excl. bars and rods) 3,530 N/A 3,530 3,883 4,236 4,589 (C)/(F) 7301 Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel 3 N/A 3 3,300 3,600 3,900 (C) 7302 Railway or tramway track construction material of iron or steel, the following : rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers "cross-ties", fish-plates, chairs, chair wedges, sole plates "base plates", rail clips, bedplates, ties and other material specialised for jointing or fixing rails 3,320 N/A 3,320 3,652 3,984 4,316 (C) 7303 Tubes, pipes and hollow profiles, of cast iron see below see below see below see below see below see below   7303 00 Tubes, pipes and hollow profiles, of cast iron 2,790 N/A 2,790 3,069 3,348 3,627   7304 Tubes, pipes and hollow profiles, seamless, of iron or steel (excl. products of cast iron) see below see below see below see below see below see below   7304 11 00 Line pipe of a kind used for oil or gas pipelines, seamless, of stainless steel 3,520 N/A 3,520 3,872 4,224 4,576   7304 19 Line pipe of a kind used for oil or gas pipelines, seamless, of iron or steel (excl. products of stainless steel or of cast iron) 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7304 22 00 Drill pipe, seamless, of stainless steel, of a kind used in drilling for oil or gas 3,520 N/A 3,520 3,872 4,224 4,576   7304 23 00 Drill pipe, seamless, of a kind used in drilling for oil or gas, of iron or steel (excl. products of stainless steel or of cast iron) 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7304 24 00 Casing and tubing, seamless, of a kind used for drilling for oil or gas, of stainless steel 3,520 N/A 3,520 3,872 4,224 4,576   7304 29 Casing and tubing, seamless, of iron or steel, of a kind used in drilling for oil or gas (excl. products of cast iron) 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7304 31 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" (excl. cast iron products and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used for drilling for oil or gas) 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7304 39 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, not cold-drawn or cold-rolled "cold-reduced" (excl. cast iron products, line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas) 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7304 41 00 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas) 3,520 N/A 3,520 3,872 4,224 4,576   7304 49 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines or of a kind used for drilling for oil or gas) 3,520 N/A 3,520 3,872 4,224 4,576   7304 51 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil) 2,830 N/A 2,830 3,113 3,396 3,679 (F) 7304 59 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil) 2,830 N/A 2,830 3,113 3,396 3,679 (C)/(F) 7304 90 00 Tubes, pipes and hollow profiles, seamless, of non-circular cross-section, of iron or steel (excl. products of cast iron) 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7305 Tubes and pipes, having circular cross-sections and an external diameter of > 406,4 mm, of flat-rolled products of iron or steel "e.g., welded, riveted or similarly closed" 3 N/A 3 3,300 3,600 3,900 (C) 7306 Tubes, pipes and hollow profiles "e.g., open seam or welded, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless tubes and pipes and tubes having internal and external circular cross-sections and an external diameter of > 406,4 mm) see below see below see below see below see below see below   7306 11 00 Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm 3,630 N/A 3,630 3,993 4,356 4,719   7306 19 00 Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron) 3 N/A 3 3,300 3,600 3,900 (C) 7306 21 00 Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm 3,630 N/A 3,630 3,993 4,356 4,719   7306 29 00 Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron) 3 N/A 3 3,300 3,600 3,900 (C) 7306 30 12 Precision tubes, welded, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" 3 N/A 3 3,300 3,600 3,900 (C) 7306 30 18 Precision tubes, welded, of circular cross-section, of iron or non-alloy steel (excl. cold-drawn or cold-rolled) 2,970 N/A 2,970 3,267 3,564 3,861   7306 30 41 Threaded or threadable tubes "gas pipe", welded, of circular cross-section, of iron or non-alloy steel, plated or coated with zinc 3 N/A 3 3,300 3,600 3,900 (C) 7306 30 49 Threaded or threadable tubes "gas pipe", welded, of circular cross-section, of iron or non-alloy steel (excl. products plated or coated with zinc) 3 N/A 3 3,300 3,600 3,900 (C) 7306 30 72 Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel, of an external diameter of <= 168,3 mm, plated or coated with zinc (excl. line pipe of a kind used for oil or gas pipelines or casing and tubingof a kind used in drilling for oil or gas) 3 N/A 3 3,300 3,600 3,900 (C) 7306 30 77 Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel of an external diameter of <= 168,3 mm (excl. plated or coated with zinc and line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used in drilling for oil or gas, precision tubes and threaded or threadable tubes "gas pipe") 3 N/A 3 3,300 3,600 3,900 (C) 7306 30 80 Tubes, pipes and hollow profiles, welded, having a circular cross-section, of iron or steel, of an external diameter of > 168,3 mm but <= 406,4 mm (excl. line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, or precision steel tubes, electrical conduit tubes or threaded or threadable tubes "gas pipe") 3 N/A 3 3,300 3,600 3,900 (C) 7306 40 20 Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. products having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) 3,630 N/A 3,630 3,993 4,356 4,719   7306 40 80 Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel (excl. products cold-drawn or cold-rolled "cold-reduced", tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) 3,600 N/A 3,600 3,960 4,320 4,680   7306 50 21 Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" 2,970 N/A 2,970 3,267 3,564 3,861 (F) 7306 50 29 Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless (excl. cold-drawn or cold-rolled) 2,930 N/A 2,930 3,223 3,516 3,809 (F) 7306 50 80 Tubes, pipes and hollow profiles, welded, of circular cross-section, of alloy steel other than stainless (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and precision steel tubes) 2,970 N/A 2,970 3,267 3,564 3,861 (F) 7306 61 10 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel 3,630 N/A 3,630 3,993 4,356 4,719   7306 61 92 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of <= 2 mm 3 N/A 3 3,300 3,600 3,900 (C) 7306 61 99 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of > 2 mm 3 N/A 3 3,300 3,600 3,900 (C) 7306 69 10 Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) 3,630 N/A 3,630 3,993 4,356 4,719   7306 69 90 Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of iron or steel other than stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) 3 N/A 3 3,300 3,600 3,900 (C) 7306 90 00 Tubes, pipes and hollow profiles "e.g., open seam, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless or welded tubes and pipes and tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm) 3 N/A 3 3,300 3,600 3,900 (C) 7307 Tube or pipe fittings "e.g. couplings, elbows, sleeves", of iron or steel see below see below see below see below see below see below   7307 11 Tube or pipe fittings of non-malleable cast iron 2,790 N/A 2,790 3,069 3,348 3,627   7307 19 10 Tube or pipe fittings of cast iron (excl. of non-malleable) 2,790 N/A 2,790 3,069 3,348 3,627   7307 19 90 Cast tube or pipe fittings of steel 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7307 21 00 Flanges of stainless steel (excl. cast products) 3 N/A 3 3,300 3,600 3,900   7307 22 Threaded elbows, bends and sleeves of stainless steel (excl. cast products) 3 N/A 3 3,300 3,600 3,900   7307 23 Butt welding tube or pipe fittings of stainless steel (excl. cast products) 3 N/A 3 3,300 3,600 3,900   7307 29 Tube or pipe fittings of stainless steel (excl. cast products, flanges, threaded elbows, bends and sleeves and butt weldings fittings) 3 N/A 3 3,300 3,600 3,900   7307 91 00 Flanges of iron or steel (excl. cast or stainless products) 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7307 92 Threaded elbows, bends and sleeves, of stainless steel (excl. cast or stainless products) 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7307 93 Butt welding fittings of iron or steel (excl. cast iron or stainless steel products, and flanges) 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7307 99 Tube or pipe fittings, of iron or steel (excl. cast iron or stainless steel products; flanges; threaded elbows, bends and sleeves; butt welding fittings) 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7308 Structures and parts of structures "e.g., bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns", of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel (excl. prefabricated buildings of heading 9406) 3,200 N/A 3,200 3,520 3,840 4,160 (C) 7309 Reservoirs, tanks, vats and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of > 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated (excl. containers specifically constructed or equipped for one or more types of transport) 3,260 N/A 3,260 3,586 3,912 4,238 (C) 7310 Tanks, casks, drums, cans, boxes and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of <= 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated, n.e.s. 3 N/A 3 3,300 3,600 3,900 (C) 7311 Containers of iron or steel, for compressed or liquefied gas (excl. containers specifically constructed or equipped for one or more types of transport) see below see below see below see below see below see below   7311 00 Containers of iron or steel, for compressed or liquefied gas (excl. containers specifically constructed or equipped for one or more types of transport) 3,170 N/A 3,170 3,487 3,804 4,121 (C) 7318 Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers, incl. spring washers, and similar articles, of iron or steel (excl. lag screws, stoppers, plugs and the like, threaded) see below see below see below see below see below see below   7318 11 00 Coach screws of iron or steel 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7318 12 10 Wood screws of stainless steel (excl. coach screws) 3,520 N/A 3,520 3,872 4,224 4,576 (C) 7318 12 90 Wood screws of iron or steel other than stainless (excl. coach screws) 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7318 13 00 Screw hooks and screw rings, of iron or steel 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7318 14 10 Self-tapping screws, of stainless steel (excl. wood screws) 3,520 N/A 3,520 3,872 4,224 4,576 (C) 7318 14 91 Spaced-thread screws of iron or steel other than stainless 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7318 14 99 Self-tapping screws of iron or steel other than stainless (excl. spaced-thread screws and wood screws) 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7318 15 Threaded screws and bolts, of iron or steel, whether or not with their nuts and washers (excl. coach screws and other wood screws, screw hooks and screw rings, self-tapping screws, lag screws, stoppers, plugs and the like, threaded) 3 N/A 3 3,300 3,600 3,900 (C) 7318 16 Nuts of iron or steel 3,090 N/A 3,090 3,399 3,708 4,017 (C) 7318 19 00 Threaded articles, of iron or steel, n.e.s. 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7318 21 00 Spring washers and other lock washers, of iron or steel 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7318 22 00 Washers of iron or steel (excl. spring washers and other lock washers) 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7318 23 00 Rivets of iron or steel (excl. tubular and bifurcated rivets for particular uses) 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7318 24 00 Cotters and cotter pins, of iron or steel 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7318 29 00 Non-threaded articles, of iron or steel 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7326 Articles of iron or steel, n.e.s. (excl. cast articles) see below see below see below see below see below see below   7326 11 00 Grinding balls and similar articles for mills, of iron or steel, forged or stamped, but not further worked 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7326 19 Articles of iron or steel, forged or stamped, but not further worked, n.e.s. (excl. grinding balls and similar articles for mills) 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7326 20 00 Articles of iron or steel wire, n.e.s. 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7326 90 30 Ladders and steps, of iron or steel 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7326 90 40 Pallets and similar platforms for handling goods, of iron or steel 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7326 90 50 Reels for cables, piping and the like, of iron or steel 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7326 90 60 Ventilators, non-mechanical, guttering, hooks and like articles used in the building industry, n.e.s., of iron or steel 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7326 90 92 Articles of iron or steel, open-die forged, n.e.s. 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7326 90 94 Articles of iron or steel, closed-die forged, n.e.s. 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7326 90 96 Sintered articles of iron or steel, n.e.s. 2,920 N/A 2,920 3,212 3,504 3,796 (C) 7326 90 98 Articles of iron or steel, n.e.s. 3 N/A 3 3,300 3,600 3,900 (C) Azerbaijan Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – _ _ _   2523 10 00 White clinker – – – _ _ _   2523 10 00 Grey clinker 0,870 0,030 0,890 0,979 1,068 1,157 (A) 2523 21 00 White Portland cement – – – _ _ _   2523 29 00 Grey Portland cement 0,890 0,050 0,940 1,034 1,128 1,222   2523 90 00 White hydraulic cements – – – _ _ _   2523 90 00 Grey hydraulic cements 0,850 0,050 0,900 0,990 1,080 1,170 (A) 2523 30 00 Aluminous cement – – – _ _ _   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 2,670 0,030 2,700 2,727 2,727 2,727   2814 10 00 Anhydrous ammonia 2,160 0,090 2,250 2,273 2,273 2,273   2814 20 00 Ammonia in aqueous solution 0,650 0,030 0,680 0,687 0,687 0,687   2834 21 00 Nitrate of potassium 2,160 0,040 2,210 2,232 2,232 2,232   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,490 0,020 0,510 0,515 0,515 0,515   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,800 0,020 0,830 0,838 0,838 0,838   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,460 0,070 1,530 1,545 1,545 1,545   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,430 0,070 1,500 1,515 1,515 1,515   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,630 0,050 0,690 0,697 0,697 0,697   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,400 0,060 1,450 1,465 1,465 1,465   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,640 0,040 1,680 1,697 1,697 1,697   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,520 0,070 2,590 2,616 2,616 2,616   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,160 0,060 2,220 2,242 2,242 2,242   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,160 0,060 2,220 2,242 2,242 2,242   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 4,160 0,050 4,210 4,252 4,252 4,252   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,110 0,060 2,170 2,192 2,192 2,192   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,590 0,060 1,640 1,656 1,656 1,656   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,640 0,060 1,700 1,717 1,717 1,717   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,810 0,060 0,860 0,869 0,869 0,869   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,060 0,060 1,120 1,131 1,131 1,131   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,720 0,050 0,770 0,778 0,778 0,778   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,510 0,040 0,550 0,556 0,556 0,556   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,320 0,030 0,350 0,354 0,354 0,354   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,460 0,080 1,540 1,555 1,555 1,555   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,580 0,080 0,660 0,667 0,667 0,667   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,420 0,050 1,470 1,485 1,485 1,485   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,730 0,030 0,760 0,768 0,768 0,768   Aluminium         10 % mark-up 20 % mark-up 30 % mark-up   7601 Unwrought aluminium 1,700 N/A 1,700 1,870 2,040 2,210 (K) 7603 Aluminium powders and flakes 1,890 N/A 1,890 2,079 2,268 2,457 (K) 7604 10 10 Bars and rods 2,120 N/A 2,120 2,332 2,544 2,756 (K) 7604 10 90 Profiles 2,130 N/A 2,130 2,343 2,556 2,769 (K) 7604 21 00 Hollow profiles 2,130 N/A 2,130 2,343 2,556 2,769 (K) 7604 29 10 Bars and rods 2,120 N/A 2,120 2,332 2,544 2,756 (K) 7604 29 90 Profiles 2,130 N/A 2,130 2,343 2,556 2,769 (K) 7605 Aluminium wire 2,120 N/A 2,120 2,332 2,544 2,756 (K) 7606 Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm 2,570 N/A 2,570 2,827 3,084 3,341 (K) 7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm 2,570 N/A 2,570 2,827 3,084 3,341 (K) 7608 Aluminium tubes and pipes 2,130 N/A 2,130 2,343 2,556 2,769 (K) 7609 00 00 Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) 2,130 N/A 2,130 2,343 2,556 2,769 (K) 7610 10 00 Doors, windows and their frames and thresholds for doors 2,130 N/A 2,130 2,343 2,556 2,769 (K) 7610 90 Other 2,130 N/A 2,130 2,343 2,556 2,769 (K) 7610 90 10 Bridges and bridge-sections, towers and lattice masts 2,130 N/A 2,130 2,343 2,556 2,769 (K) 7610 90 90 Other 2,130 N/A 2,130 2,343 2,556 2,769 (K) 7611 00 00 Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 2,570 N/A 2,570 2,827 3,084 3,341 (K) 7612 Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 2,570 N/A 2,570 2,827 3,084 3,341 (K) 7613 00 00 Aluminium containers for compressed or liquefied gas 2,570 N/A 2,570 2,827 3,084 3,341 (K) 7614 Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated 2,120 N/A 2,120 2,332 2,544 2,756 (K) 7616 10 00 Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles 2,570 N/A 2,570 2,827 3,084 3,341 (K) 7616 91 00 Cloth, grill, netting and fencing, of aluminium wire 2,570 N/A 2,570 2,827 3,084 3,341 (K) 7616 99 10 Cast 1,890 N/A 1,890 2,079 2,268 2,457 (K) 7616 99 90 Other 2,570 N/A 2,570 2,827 3,084 3,341 (K) Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066   Iron and steel         10 % mark-up 20 % mark-up 30 % mark-up   2601 12 00 Agglomerated iron ores and concentrates (excl. roasted iron pyrites) 0,070 0,050 0,120 0,132 0,144 0,156   7201 Pig iron and spiegeleisen, in pigs, blocks or other primary forms – N/A – _ _ _   7202 11 Ferro-manganese, containing by weight > 2% of carbon – N/A – _ _ _   7202 19 Ferro-manganese, containing by weight <= 2% carbon – N/A – _ _ _   7202 41 Ferro-chromium, containing by weight > 4% of carbon – N/A – _ _ _   7202 49 Ferro-chromium, containing by weight <= 4% of carbon – N/A – _ _ _   7202 60 00 Ferro-nickel – N/A – _ _ _   7203 Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99,94%, in lumps, pellets or similar forms – N/A – _ _ _   7205 Granules and powders of pig iron, spiegeleisen, iron or steel (excl. granules and powders of ferro-alloys, turnings and filings of iron or steel, radioactive iron powders "isotopes" and certain low-calibre, substandard balls for ballbearings) 1,500 N/A 1,500 1,650 1,800 1,950 (E) 7206 Iron and non-alloy steel in ingots or other primary forms (excl. remelting scrap ingots, products obtained by continuous casting and iron of heading 7203) see below see below see below see below see below see below   7206 10 00 Ingots, of iron and non-alloy steel (excl. remelted scrap ingots, continuous cast products, iron of heading 7203) 0,130 N/A 0,130 0,143 0,156 0,169 (E) 7206 90 00 Iron and non-alloy steel, in puddled bars or other primary forms (excl. ingots, remelted scrap ingots, continuous cast products, iron of heading 7203) 0,140 N/A 0,140 0,154 0,168 0,182 (E) 7207 Semi-finished products of iron or non-alloy steel see below see below see below see below see below see below   7207 11 11 Semi-finished products, of non-alloy free-cutting steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting 0,140 N/A 0,140 0,154 0,168 0,182 (E) 7207 11 14 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness of <= 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel) 0,140 N/A 0,140 0,154 0,168 0,182 (E) 7207 11 16 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness of > 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel) 0,140 N/A 0,140 0,154 0,168 0,182 (E) 7207 11 90 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular cross-section, the width < twice the thickness, forged 0,130 N/A 0,130 0,143 0,156 0,169 (E) 7207 12 10 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtained by continuous casting 0,140 N/A 0,140 0,154 0,168 0,182 (E) 7207 12 90 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular "other than square" cross-section, the width >= twice the thickness, forged 0,130 N/A 0,130 0,143 0,156 0,169 (E) 7207 19 12 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting 0,140 N/A 0,140 0,154 0,168 0,182 (E) 7207 19 19 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, forged 0,130 N/A 0,130 0,143 0,156 0,169 (E) 7207 19 80 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon (excl. semi-products, of square, rectangular, circular or polygonal cross-section) 0,140 N/A 0,140 0,154 0,168 0,182 (E) 7207 20 11 Semi-finished products, of non-alloy free-cutting steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting 0,140 N/A 0,140 0,154 0,168 0,182 (E) 7207 20 15 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% but < 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel) 0,140 N/A 0,140 0,154 0,168 0,182 (E) 7207 20 17 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel) 0,140 N/A 0,140 0,154 0,168 0,182 (E) 7207 20 19 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, forged 0,130 N/A 0,130 0,143 0,156 0,169 (E) 7207 20 32 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtained by continuous casting 0,140 N/A 0,140 0,154 0,168 0,182 (E) 7207 20 39 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of rectangular "other than square" cross-section and the width >= twice the thickness, forged 0,130 N/A 0,130 0,143 0,156 0,169 (E) 7207 20 52 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting 0,140 N/A 0,140 0,154 0,168 0,182 (E) 7207 20 59 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of circular or polygonal cross-section, forged 0,130 N/A 0,130 0,143 0,156 0,169 (E) 7207 20 80 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon (excl. those of square, rectangular, circular or polygonal cross-section) 0,140 N/A 0,140 0,154 0,168 0,182 (E) 7208 Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled, not clad, plated or coated 0,140 N/A 0,140 0,154 0,168 0,182 (E) 7209 Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, cold-rolled "cold-reduced", not clad, plated or coated 0,140 N/A 0,140 0,154 0,168 0,182 (E) 7210 Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated 0,140 N/A 0,140 0,154 0,168 0,182 (E) 7211 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", not clad, plated or coated see below see below see below see below see below see below   7211 13 00 Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as "wide flats" 0,140 N/A 0,140 0,154 0,168 0,182 (E) 7211 14 00 Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, not further worked than hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm (excl. "wide flats") 0,140 N/A 0,140 0,154 0,168 0,182 (E) 7211 19 00 Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, simply hot-rolled, not clad, plated or coated, of a thickness < 4,75 mm (excl. "wide flats") 0,140 N/A 0,140 0,154 0,168 0,182 (E) 7211 23 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight < 0,25% of carbon 0,140 N/A 0,140 0,154 0,168 0,182 (E) 7211 29 00 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight >= 0,25% of carbon 0,140 N/A 0,140 0,154 0,168 0,182 (E) 7211 90 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked, but not clad, plated or coated 0,140 N/A 0,140 0,154 0,168 0,182 (E) 7212 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated 0,140 N/A 0,140 0,154 0,168 0,182 (E) 7213 Bars and rods of iron or non-alloy steel, hot-rolled, in irregularly wound coils 0,140 N/A 0,140 0,154 0,168 0,182 (E) 7214 Bars and rods, of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but incl. those twisted after rolling (excl. in irregularly wound coils) see below see below see below see below see below see below   7214 10 00 Bars and rods, of iron or non-alloy steel, not further worked than forged (excl. in irregularly wound coils) 0,130 N/A 0,130 0,143 0,156 0,169 (E) 7214 20 00 Bars and rods, of iron or non-alloy steel, with indentations, ribs, groves or other deformations produced during the rolling process 0,140 N/A 0,140 0,154 0,168 0,182 (E) 7214 30 00 Bars and rods, of non-alloy free-cutting steel, not further worked than hot-rolled, hot-drawn or hot-extruded (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling) 0,140 N/A 0,140 0,154 0,168 0,182 (E) 7214 91 Bars and rods, of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, of rectangular "other than square" cross-section (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process, bars and rods twisted after rolling and free-cutting steel) 0,140 N/A 0,140 0,154 0,168 0,182 (E) 7214 99 Bars and rods, of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded (excl. of rectangular [other than square] cross-section and those containing indentations, ribs, grooves or other deformations produced during the rolling process, and of non-alloy free-cutting steel) 0,140 N/A 0,140 0,154 0,168 0,182 (E) 7215 Bars and rods, of iron or non-alloy steel, cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked, n.e.s. 0,140 N/A 0,140 0,154 0,168 0,182 (E) 7216 Angles, shapes and sections of iron or non-alloy steel, n.e.s. 0,140 N/A 0,140 0,154 0,168 0,182 (E) 7217 Wire of iron or non-alloy steel, in coils (excl. bars and rods) see below see below see below see below see below see below   7217 10 Wire of iron or non-alloy steel, in coils, not plated or coated, whether or not polished (excl. bars and rods) 0,140 N/A 0,140 0,154 0,168 0,182 (E) 7217 20 Wire of iron or non-alloy steel, in coils, plated or coated with zinc (excl. bars and rods) 0,140 N/A 0,140 0,154 0,168 0,182 (E) 7217 30 Wire of iron or non-alloy steel, in coils, plated or coated with base metals (excl. plated or coated with zinc, and bars and rods) 0,140 N/A 0,140 0,154 0,168 0,182 (E) 7217 90 Wire of iron or non-alloy steel, in coils, plated or coated (excl. plated or coated with base metals, and bars and rods) 0,140 N/A 0,140 0,154 0,168 0,182 (E) 7218 Stainless steel in ingots or other primary forms (excl. remelting scrap ingots and products obtained by continuous casting); semi-finished products of stainless steel see below see below see below see below see below see below   7218 10 00 Steel, stainless, in ingots and other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) 2,570 N/A 2,570 2,827 3,084 3,341   7218 91 Semi-finished products of stainless steel, of rectangular "other than square" cross-section 2,570 N/A 2,570 2,827 3,084 3,341   7218 99 11 Semi-finished products of stainless steel, of square cross-section, rolled or obtained by continuous casting 2,570 N/A 2,570 2,827 3,084 3,341   7218 99 19 Semi-finished products of stainless steel, of square cross-section, forged 2,570 N/A 2,570 2,827 3,084 3,341   7218 99 20 Semi-finished products of stainless steel, of circular cross-section or of cross-section other than square or rectangular, rolled or obtained by continuous casting 2,570 N/A 2,570 2,827 3,084 3,341   7218 99 80 Semi-finished products of stainless steel, forged (excl. products of square or rectangular cross-section) 2,570 N/A 2,570 2,827 3,084 3,341   7219 Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7219 11 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of > 10 mm 2,570 N/A 2,570 2,827 3,084 3,341   7219 12 Flat-rolled products of stainless steel, of a width of>= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 4,7 mm and <= 10 mm 2,570 N/A 2,570 2,827 3,084 3,341   7219 13 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 3 mm and < 4,75 mm 2,570 N/A 2,570 2,827 3,084 3,341   7219 14 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of < 3 mm 2,570 N/A 2,570 2,827 3,084 3,341   7219 21 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of > 10 mm 2,570 N/A 2,570 2,827 3,084 3,341   7219 22 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 4,75 mm and <= 10 mm 2,570 N/A 2,570 2,827 3,084 3,341   7219 23 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 3 mm and < 4,75 mm 2,570 N/A 2,570 2,827 3,084 3,341   7219 24 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of < 3 mm 2,570 N/A 2,570 2,827 3,084 3,341   7219 31 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 4,75 mm 2,570 N/A 2,570 2,827 3,084 3,341   7219 32 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 3 mm but < 4,75 mm 2,570 N/A 2,570 2,827 3,084 3,341   7219 33 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of > 1 mm but < 3 mm 2,570 N/A 2,570 2,827 3,084 3,341   7219 34 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 0,5 mm but <= 1 mm 2,570 N/A 2,570 2,827 3,084 3,341   7219 35 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of < 0,5 mm 2,570 N/A 2,570 2,827 3,084 3,341   7219 90 Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked 2,570 N/A 2,570 2,827 3,084 3,341   7220 Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7220 11 00 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of >= 4,75 mm 2,570 N/A 2,570 2,827 3,084 3,341   7220 12 00 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of < 4,75 mm 2,570 N/A 2,570 2,827 3,084 3,341   7220 20 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" 2,570 N/A 2,570 2,827 3,084 3,341   7220 90 Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked 2,570 N/A 2,570 2,827 3,084 3,341   7221 Bars and rods of stainless steel, hot-rolled, in irregularly wound coils 2,570 N/A 2,570 2,827 3,084 3,341   7222 Other bars and rods of stainless steel; angles, shapes and sections of stainless steel, n.e.s. see below see below see below see below see below see below   7222 11 Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only hot-extruded, of circular cross-section 2,570 N/A 2,570 2,827 3,084 3,341   7222 19 Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only extruded (excl. of circular cross-section) 2,570 N/A 2,570 2,827 3,084 3,341   7222 20 Other bars and rods of stainless steel, not further worked than cold-formed or cold-finished 2,570 N/A 2,570 2,827 3,084 3,341   7222 30 Other bars and rods of stainless steel, cold-formed or cold-finished and further worked, or not further worked than forged, or forged, or hot-formed by other means and further worked, n.e.s. 2,570 N/A 2,570 2,827 3,084 3,341   7222 40 Angles, shapes and sections of stainless steel, n.e.s. 2,570 N/A 2,570 2,827 3,084 3,341   7223 Wire of stainless steel, in coils (excl. bars and rods) see below see below see below see below see below see below   7223 00 Wire of stainless steel, in coils (excl. bars and rods) 2,570 N/A 2,570 2,827 3,084 3,341   7224 Steel, alloy, other than stainless, in ingots or other primary forms, semi-finished products of alloy steel other than stainless (excl. waste and scrap in ingot form, and products obtained by continuous casting) see below see below see below see below see below see below   7224 10 Steel, alloy, other than stainless, in ingots or other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) 2,310 N/A 2,310 2,541 2,772 3,003 (H) 7224 90 02 Semi-finished products of tool steel 2,310 N/A 2,310 2,541 2,772 3,003 (H) 7224 90 03 Semi-finished products of high-speed steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting the width measuring < twice the thickness 2,310 N/A 2,310 2,541 2,772 3,003 (H) 7224 90 05 Semi-finished products of steel containing by weight <= 0,7% of carbon, 0,5% to 1,2% of manganese, 0,6% to 2,3% of silicon, or of steel containing by weight >= 0,0008% of boron with any other element < the minimum content referred to in Note 1 f to chapter 72, of square or rectangular cross-section, hot rolled or obtained by continuous casting, the width measuring < twice the thickness 2,310 N/A 2,310 2,541 2,772 3,003 (H) 7224 90 07 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring < twice the thickness (excl. of tool steel, high-speed steel and articles of subheading 7224.90.05) 2,310 N/A 2,310 2,541 2,772 3,003 (H) 7224 90 14 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring >= twice the thickness (excl. of tool steel) 2,310 N/A 2,310 2,541 2,772 3,003 (H) 7224 90 18 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, forged (excl. of tool steel) 2,310 N/A 2,310 2,541 2,772 3,003 (H) 7224 90 31 Semi-finished products of steel containing by weight 0,9% to 1,15% carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting 2,310 N/A 2,310 2,541 2,772 3,003 (H) 7224 90 38 Semi-finished products of alloy steel, other than stainless steel, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting (excl. of tool steel and products containing by weight 0,9% to 1,15% of carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum) 2,310 N/A 2,310 2,541 2,772 3,003 (H) 7224 90 90 Semi-finished products of alloy steel, other than stainless steel, forged (excl. of tool steel and products of square or rectangular, circular or polygamol cross-section) 2,310 N/A 2,310 2,541 2,772 3,003 (H) 7225 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7225 11 00 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, grain-oriented 3,710 N/A 3,710 4,081 4,452 4,823 (E) 7225 19 10 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, hot-rolled 2,310 N/A 2,310 2,541 2,772 3,003 (E) 7225 19 90 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, cold-rolled "cold-reduced", non-grain-oriented 2,310 N/A 2,310 2,541 2,772 3,003 (H) 7225 30 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, in coils (excl. products of silicon-electrical steel) 2,310 N/A 2,310 2,541 2,772 3,003 (H) 7225 40 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, not in coils (excl. products of silicon-electrical steel) 2,310 N/A 2,310 2,541 2,772 3,003 (H) 7225 50 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of silicon-electrical steel) 2,310 N/A 2,310 2,541 2,772 3,003 (H) 7225 91 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and electrolytically plated or coated with zinc (excl. products of silicon-electrical steel) 2,310 N/A 2,310 2,541 2,772 3,003 (H) 7225 92 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and plated or coated with zinc (excl. electrolytically plated or coated and products of silicon-electrical steel) 2,310 N/A 2,310 2,541 2,772 3,003 (H) 7225 99 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. plated or coated with zinc and products of silicon-electrical steel) 2,310 N/A 2,310 2,541 2,772 3,003 (H) 7226 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7226 11 00 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", grain-oriented 3,710 N/A 3,710 4,081 4,452 4,823 (E) 7226 19 10 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, not further worked than hot-rolled 2,310 N/A 2,310 2,541 2,772 3,003 (E) 7226 19 80 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, cold-rolled "cold-reduced", whether or not further worked, or hot-rolled and further worked, non-grain-oriented 2,310 N/A 2,310 2,541 2,772 3,003 (H) 7226 20 00 Flat-rolled products of high-speed steel, of a width of <= 600 mm, hot-rolled or cold-rolled "cold-reduced" 2,310 N/A 2,310 2,541 2,772 3,003 (H) 7226 91 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than hot-rolled (excl. products of high-speed steel or silicon-electrical steel) 2,310 N/A 2,310 2,541 2,772 3,003 (H) 7226 92 00 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of high-speed steel or silicon-electrical steel) 2,310 N/A 2,310 2,541 2,772 3,003 (H) 7226 99 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. products of high-speed steel or silicon-electrical steel) 2,310 N/A 2,310 2,541 2,772 3,003 (H) 7227 Bars and rods of alloy steel other than stainless, hot-rolled, in irregularly wound coils 2,310 N/A 2,310 2,541 2,772 3,003 (E)/(H) 7228 Other bars and rods of alloy steel other than stainless, angles, shapes and sections of alloy steel other than stainless, n.e.s.; hollow drill bars and rods, of alloy or non-alloy steel see below see below see below see below see below see below   7228 10 20 Bars and rods of high-speed steel, not further worked than hot-rolled, hot-drawn or extruded, and hot-rolled, hot-drawn or extruded, not further worked than clad (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 2,310 N/A 2,310 2,541 2,772 3,003 (H) 7228 10 50 Bars and rods of high-speed steel, forged (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 2,310 N/A 2,310 2,541 2,772 3,003 (H) 7228 10 90 Bars and rods of high-speed steel, not further worked than cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked (excl. forged products, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 2,310 N/A 2,310 2,541 2,772 3,003 (H) 7228 20 Bars and rods of silico-manganese steel (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 2,310 N/A 2,310 2,541 2,772 3,003 (H) 7228 30 Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 2,310 N/A 2,310 2,541 2,772 3,003 (E)/(H) 7228 40 Bars and rods of alloy steel other than stainless, not further worked than forged (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 2,310 N/A 2,310 2,541 2,772 3,003 (H) 7228 50 Bars and rods of alloy steel other than stainless, not further worked than cold-formed or cold-finished (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 2,310 N/A 2,310 2,541 2,772 3,003 (E)/(H) 7228 60 Bars and rods of alloy steel other than stainless, cold-formed or cold-finished and further worked or hot-formed and further worked, n.e.s. (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 2,310 N/A 2,310 2,541 2,772 3,003 (H) 7228 70 Angles, shapes and sections of alloy steel other than stainless, n.e.s. 2,310 N/A 2,310 2,541 2,772 3,003 (H) 7228 80 00 Hollow drill bars and rods, of alloy or non-alloy steel 2,310 N/A 2,310 2,541 2,772 3,003 (H) 7229 Wire of alloy steel other than stainless, in coils (excl. bars and rods) 2,310 N/A 2,310 2,541 2,772 3,003 (E)/(H) 7301 Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel 0,190 N/A 0,190 0,209 0,228 0,247 (E) 7302 Railway or tramway track construction material of iron or steel, the following : rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers "cross-ties", fish-plates, chairs, chair wedges, sole plates "base plates", rail clips, bedplates, ties and other material specialised for jointing or fixing rails 1,850 N/A 1,850 2,035 2,220 2,405 (E) 7303 Tubes, pipes and hollow profiles, of cast iron see below see below see below see below see below see below   7303 00 Tubes, pipes and hollow profiles, of cast iron 1,500 N/A 1,500 1,650 1,800 1,950   7304 Tubes, pipes and hollow profiles, seamless, of iron or steel (excl. products of cast iron) see below see below see below see below see below see below   7304 11 00 Line pipe of a kind used for oil or gas pipelines, seamless, of stainless steel 2,570 N/A 2,570 2,827 3,084 3,341   7304 19 Line pipe of a kind used for oil or gas pipelines, seamless, of iron or steel (excl. products of stainless steel or of cast iron) 0,240 N/A 0,240 0,264 0,288 0,312 (E) 7304 22 00 Drill pipe, seamless, of stainless steel, of a kind used in drilling for oil or gas 2,570 N/A 2,570 2,827 3,084 3,341   7304 23 00 Drill pipe, seamless, of a kind used in drilling for oil or gas, of iron or steel (excl. products of stainless steel or of cast iron) 0,240 N/A 0,240 0,264 0,288 0,312 (E) 7304 24 00 Casing and tubing, seamless, of a kind used for drilling for oil or gas, of stainless steel 2,570 N/A 2,570 2,827 3,084 3,341   7304 29 Casing and tubing, seamless, of iron or steel, of a kind used in drilling for oil or gas (excl. products of cast iron) 0,240 N/A 0,240 0,264 0,288 0,312 (E) 7304 31 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" (excl. cast iron products and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used for drilling for oil or gas) 0,240 N/A 0,240 0,264 0,288 0,312 (E) 7304 39 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, not cold-drawn or cold-rolled "cold-reduced" (excl. cast iron products, line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas) 0,240 N/A 0,240 0,264 0,288 0,312 (E) 7304 41 00 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas) 2,570 N/A 2,570 2,827 3,084 3,341   7304 49 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines or of a kind used for drilling for oil or gas) 2,570 N/A 2,570 2,827 3,084 3,341   7304 51 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil) 0,240 N/A 0,240 0,264 0,288 0,312 (H) 7304 59 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil) 0,240 N/A 0,240 0,264 0,288 0,312 (E)/(H) 7304 90 00 Tubes, pipes and hollow profiles, seamless, of non-circular cross-section, of iron or steel (excl. products of cast iron) 0,240 N/A 0,240 0,264 0,288 0,312 (E) 7305 Tubes and pipes, having circular cross-sections and an external diameter of > 406,4 mm, of flat-rolled products of iron or steel "e.g., welded, riveted or similarly closed" 0,240 N/A 0,240 0,264 0,288 0,312 (E) 7306 Tubes, pipes and hollow profiles "e.g., open seam or welded, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless tubes and pipes and tubes having internal and external circular cross-sections and an external diameter of > 406,4 mm) see below see below see below see below see below see below   7306 11 00 Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm 2,570 N/A 2,570 2,827 3,084 3,341   7306 19 00 Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron) 0,240 N/A 0,240 0,264 0,288 0,312 (E) 7306 21 00 Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm 2,570 N/A 2,570 2,827 3,084 3,341   7306 29 00 Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron) 0,240 N/A 0,240 0,264 0,288 0,312 (E) 7306 30 12 Precision tubes, welded, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" 0,240 N/A 0,240 0,264 0,288 0,312 (E) 7306 30 18 Precision tubes, welded, of circular cross-section, of iron or non-alloy steel (excl. cold-drawn or cold-rolled) 0,240 N/A 0,240 0,264 0,288 0,312   7306 30 41 Threaded or threadable tubes "gas pipe", welded, of circular cross-section, of iron or non-alloy steel, plated or coated with zinc 0,240 N/A 0,240 0,264 0,288 0,312 (E) 7306 30 49 Threaded or threadable tubes "gas pipe", welded, of circular cross-section, of iron or non-alloy steel (excl. products plated or coated with zinc) 0,240 N/A 0,240 0,264 0,288 0,312 (E) 7306 30 72 Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel, of an external diameter of <= 168,3 mm, plated or coated with zinc (excl. line pipe of a kind used for oil or gas pipelines or casing and tubingof a kind used in drilling for oil or gas) 0,240 N/A 0,240 0,264 0,288 0,312 (E) 7306 30 77 Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel of an external diameter of <= 168,3 mm (excl. plated or coated with zinc and line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used in drilling for oil or gas, precision tubes and threaded or threadable tubes "gas pipe") 0,240 N/A 0,240 0,264 0,288 0,312 (E) 7306 30 80 Tubes, pipes and hollow profiles, welded, having a circular cross-section, of iron or steel, of an external diameter of > 168,3 mm but <= 406,4 mm (excl. line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, or precision steel tubes, electrical conduit tubes or threaded or threadable tubes "gas pipe") 0,240 N/A 0,240 0,264 0,288 0,312 (E) 7306 40 20 Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. products having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) 2,570 N/A 2,570 2,827 3,084 3,341   7306 40 80 Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel (excl. products cold-drawn or cold-rolled "cold-reduced", tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) 2,570 N/A 2,570 2,827 3,084 3,341   7306 50 21 Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" 0,240 N/A 0,240 0,264 0,288 0,312 (H) 7306 50 29 Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless (excl. cold-drawn or cold-rolled) 0,240 N/A 0,240 0,264 0,288 0,312 (H) 7306 50 80 Tubes, pipes and hollow profiles, welded, of circular cross-section, of alloy steel other than stainless (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and precision steel tubes) 0,240 N/A 0,240 0,264 0,288 0,312 (H) 7306 61 10 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel 2,570 N/A 2,570 2,827 3,084 3,341   7306 61 92 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of <= 2 mm 0,240 N/A 0,240 0,264 0,288 0,312 (E) 7306 61 99 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of > 2 mm 0,240 N/A 0,240 0,264 0,288 0,312 (E) 7306 69 10 Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) 2,570 N/A 2,570 2,827 3,084 3,341   7306 69 90 Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of iron or steel other than stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) 0,240 N/A 0,240 0,264 0,288 0,312 (E) 7306 90 00 Tubes, pipes and hollow profiles "e.g., open seam, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless or welded tubes and pipes and tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm) 0,240 N/A 0,240 0,264 0,288 0,312 (E) 7307 Tube or pipe fittings "e.g. couplings, elbows, sleeves", of iron or steel see below see below see below see below see below see below   7307 11 Tube or pipe fittings of non-malleable cast iron 1,500 N/A 1,500 1,650 1,800 1,950   7307 19 10 Tube or pipe fittings of cast iron (excl. of non-malleable) 1,500 N/A 1,500 1,650 1,800 1,950   7307 19 90 Cast tube or pipe fittings of steel 0,130 N/A 0,130 0,143 0,156 0,169 (E) 7307 21 00 Flanges of stainless steel (excl. cast products) 2,360 N/A 2,360 2,596 2,832 3,068   7307 22 Threaded elbows, bends and sleeves of stainless steel (excl. cast products) 2,360 N/A 2,360 2,596 2,832 3,068   7307 23 Butt welding tube or pipe fittings of stainless steel (excl. cast products) 2,360 N/A 2,360 2,596 2,832 3,068   7307 29 Tube or pipe fittings of stainless steel (excl. cast products, flanges, threaded elbows, bends and sleeves and butt weldings fittings) 2,360 N/A 2,360 2,596 2,832 3,068   7307 91 00 Flanges of iron or steel (excl. cast or stainless products) 0,140 N/A 0,140 0,154 0,168 0,182 (E) 7307 92 Threaded elbows, bends and sleeves, of stainless steel (excl. cast or stainless products) 0,140 N/A 0,140 0,154 0,168 0,182 (E) 7307 93 Butt welding fittings of iron or steel (excl. cast iron or stainless steel products, and flanges) 0,140 N/A 0,140 0,154 0,168 0,182 (E) 7307 99 Tube or pipe fittings, of iron or steel (excl. cast iron or stainless steel products; flanges; threaded elbows, bends and sleeves; butt welding fittings) 0,140 N/A 0,140 0,154 0,168 0,182 (E) 7308 Structures and parts of structures "e.g., bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns", of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel (excl. prefabricated buildings of heading 9406) 1,890 N/A 1,890 2,079 2,268 2,457 (E) 7309 Reservoirs, tanks, vats and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of > 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated (excl. containers specifically constructed or equipped for one or more types of transport) 1,770 N/A 1,770 1,947 2,124 2,301 (E) 7310 Tanks, casks, drums, cans, boxes and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of <= 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated, n.e.s. 0,240 N/A 0,240 0,264 0,288 0,312 (E) 7311 Containers of iron or steel, for compressed or liquefied gas (excl. containers specifically constructed or equipped for one or more types of transport) see below see below see below see below see below see below   7311 00 Containers of iron or steel, for compressed or liquefied gas (excl. containers specifically constructed or equipped for one or more types of transport) 1,770 N/A 1,770 1,947 2,124 2,301 (E) 7318 Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers, incl. spring washers, and similar articles, of iron or steel (excl. lag screws, stoppers, plugs and the like, threaded) see below see below see below see below see below see below   7318 11 00 Coach screws of iron or steel 0,140 N/A 0,140 0,154 0,168 0,182 (E) 7318 12 10 Wood screws of stainless steel (excl. coach screws) 2,570 N/A 2,570 2,827 3,084 3,341 (E) 7318 12 90 Wood screws of iron or steel other than stainless (excl. coach screws) 0,140 N/A 0,140 0,154 0,168 0,182 (E) 7318 13 00 Screw hooks and screw rings, of iron or steel 0,140 N/A 0,140 0,154 0,168 0,182 (E) 7318 14 10 Self-tapping screws, of stainless steel (excl. wood screws) 2,570 N/A 2,570 2,827 3,084 3,341 (E) 7318 14 91 Spaced-thread screws of iron or steel other than stainless 0,140 N/A 0,140 0,154 0,168 0,182 (E) 7318 14 99 Self-tapping screws of iron or steel other than stainless (excl. spaced-thread screws and wood screws) 0,140 N/A 0,140 0,154 0,168 0,182 (E) 7318 15 Threaded screws and bolts, of iron or steel, whether or not with their nuts and washers (excl. coach screws and other wood screws, screw hooks and screw rings, self-tapping screws, lag screws, stoppers, plugs and the like, threaded) 2,140 N/A 2,140 2,354 2,568 2,782 (E) 7318 16 Nuts of iron or steel 2,220 N/A 2,220 2,442 2,664 2,886 (E) 7318 19 00 Threaded articles, of iron or steel, n.e.s. 0,140 N/A 0,140 0,154 0,168 0,182 (E) 7318 21 00 Spring washers and other lock washers, of iron or steel 0,140 N/A 0,140 0,154 0,168 0,182 (E) 7318 22 00 Washers of iron or steel (excl. spring washers and other lock washers) 1,030 N/A 1,030 1,133 1,236 1,339 (E) 7318 23 00 Rivets of iron or steel (excl. tubular and bifurcated rivets for particular uses) 0,750 N/A 0,750 0,825 0,900 0,975 (E) 7318 24 00 Cotters and cotter pins, of iron or steel 0,140 N/A 0,140 0,154 0,168 0,182 (E) 7318 29 00 Non-threaded articles, of iron or steel 0,140 N/A 0,140 0,154 0,168 0,182 (E) 7326 Articles of iron or steel, n.e.s. (excl. cast articles) see below see below see below see below see below see below   7326 11 00 Grinding balls and similar articles for mills, of iron or steel, forged or stamped, but not further worked 0,130 N/A 0,130 0,143 0,156 0,169 (E) 7326 19 Articles of iron or steel, forged or stamped, but not further worked, n.e.s. (excl. grinding balls and similar articles for mills) 0,130 N/A 0,130 0,143 0,156 0,169 (E) 7326 20 00 Articles of iron or steel wire, n.e.s. 0,140 N/A 0,140 0,154 0,168 0,182 (E) 7326 90 30 Ladders and steps, of iron or steel 0,140 N/A 0,140 0,154 0,168 0,182 (E) 7326 90 40 Pallets and similar platforms for handling goods, of iron or steel 0,140 N/A 0,140 0,154 0,168 0,182 (E) 7326 90 50 Reels for cables, piping and the like, of iron or steel 0,140 N/A 0,140 0,154 0,168 0,182 (E) 7326 90 60 Ventilators, non-mechanical, guttering, hooks and like articles used in the building industry, n.e.s., of iron or steel 0,140 N/A 0,140 0,154 0,168 0,182 (E) 7326 90 92 Articles of iron or steel, open-die forged, n.e.s. 0,130 N/A 0,130 0,143 0,156 0,169 (E) 7326 90 94 Articles of iron or steel, closed-die forged, n.e.s. 0,130 N/A 0,130 0,143 0,156 0,169 (E) 7326 90 96 Sintered articles of iron or steel, n.e.s. 0,130 N/A 0,130 0,143 0,156 0,169 (E) 7326 90 98 Articles of iron or steel, n.e.s. 0,140 N/A 0,140 0,154 0,168 0,182 (E) Bangladesh Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – _ _ _   2523 10 00 White clinker – – – _ _ _   2523 10 00 Grey clinker 1,360 0,030 1,390 1,529 1,668 1,807 (A) 2523 21 00 White Portland cement 1,280 0,130 1,410 1,551 1,692 1,833   2523 29 00 Grey Portland cement 1,210 0,060 1,270 1,397 1,524 1,651   2523 90 00 White hydraulic cements 1,310 0,170 1,480 1,628 1,776 1,924 (B) 2523 90 00 Grey hydraulic cements 1,150 0,070 1,210 1,331 1,452 1,573 (A) 2523 30 00 Aluminous cement – – – _ _ _   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 1,820 0,050 1,870 1,889 1,889 1,889   2814 10 00 Anhydrous ammonia 2,340 0,160 2,510 2,535 2,535 2,535   2814 20 00 Ammonia in aqueous solution 0,700 0,050 0,750 0,758 0,758 0,758   2834 21 00 Nitrate of potassium 1,640 0,080 1,720 1,737 1,737 1,737   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,520 0,040 0,560 0,566 0,566 0,566   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,860 0,040 0,910 0,919 0,919 0,919   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,570 0,120 1,700 1,717 1,717 1,717   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,540 0,120 1,660 1,677 1,677 1,677   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,680 0,090 0,770 0,778 0,778 0,778   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,180 0,100 1,280 1,293 1,293 1,293   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,250 0,080 1,320 1,333 1,333 1,333   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,920 0,120 2,040 2,060 2,060 2,060   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,660 0,110 1,770 1,788 1,788 1,788   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,660 0,110 1,770 1,788 1,788 1,788   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,830 0,080 2,920 2,949 2,949 2,949   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,610 0,110 1,710 1,727 1,727 1,727   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,360 0,100 1,450 1,465 1,465 1,465   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,500 0,110 1,620 1,636 1,636 1,636   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,700 0,090 0,800 0,808 0,808 0,808   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,840 0,110 0,950 0,960 0,960 0,960   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,570 0,080 0,650 0,657 0,657 0,657   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,550 0,070 0,620 0,626 0,626 0,626   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,350 0,050 0,400 0,404 0,404 0,404   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,140 0,130 1,270 1,283 1,283 1,283   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,630 0,110 0,740 0,747 0,747 0,747   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,100 0,080 1,190 1,202 1,202 1,202   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,570 0,060 0,630 0,636 0,636 0,636   Aluminium         10 % mark-up 20 % mark-up 30 % mark-up   7601 Unwrought aluminium 0,360 N/A 0,360 0,396 0,432 0,468 (L) 7603 Aluminium powders and flakes 1,690 N/A 1,690 1,859 2,028 2,197 (L) 7604 10 10 Bars and rods 1,910 N/A 1,910 2,101 2,292 2,483 (L) 7604 10 90 Profiles 1,930 N/A 1,930 2,123 2,316 2,509 (L) 7604 21 00 Hollow profiles 1,930 N/A 1,930 2,123 2,316 2,509 (L) 7604 29 10 Bars and rods 1,910 N/A 1,910 2,101 2,292 2,483 (L) 7604 29 90 Profiles 1,930 N/A 1,930 2,123 2,316 2,509 (L) 7605 Aluminium wire 1,910 N/A 1,910 2,101 2,292 2,483 (L) 7606 Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm 2,370 N/A 2,370 2,607 2,844 3,081 (L) 7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm 2,370 N/A 2,370 2,607 2,844 3,081 (L) 7608 Aluminium tubes and pipes 1,930 N/A 1,930 2,123 2,316 2,509 (L) 7609 00 00 Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) 1,930 N/A 1,930 2,123 2,316 2,509 (L) 7610 10 00 Doors, windows and their frames and thresholds for doors 1,930 N/A 1,930 2,123 2,316 2,509 (L) 7610 90 Other 1,930 N/A 1,930 2,123 2,316 2,509 (L) 7610 90 10 Bridges and bridge-sections, towers and lattice masts 1,930 N/A 1,930 2,123 2,316 2,509 (L) 7610 90 90 Other 1,930 N/A 1,930 2,123 2,316 2,509 (L) 7611 00 00 Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 2,370 N/A 2,370 2,607 2,844 3,081 (L) 7612 Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 2,370 N/A 2,370 2,607 2,844 3,081 (L) 7613 00 00 Aluminium containers for compressed or liquefied gas 2,370 N/A 2,370 2,607 2,844 3,081 (L) 7614 Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated 1,910 N/A 1,910 2,101 2,292 2,483 (L) 7616 10 00 Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles 2,370 N/A 2,370 2,607 2,844 3,081 (L) 7616 91 00 Cloth, grill, netting and fencing, of aluminium wire 2,370 N/A 2,370 2,607 2,844 3,081 (L) 7616 99 10 Cast 1,690 N/A 1,690 1,859 2,028 2,197 (L) 7616 99 90 Other 2,370 N/A 2,370 2,607 2,844 3,081 (L) Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066   Bahrain Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Aluminium         10 % mark-up 20 % mark-up 30 % mark-up   7601 Unwrought aluminium 1,870 N/A 1,870 2,057 2,244 2,431 (K) 7603 Aluminium powders and flakes 1,980 N/A 1,980 2,178 2,376 2,574 (K) 7604 10 10 Bars and rods 2,200 N/A 2,200 2,420 2,640 2,860 (K) 7604 10 90 Profiles 2,220 N/A 2,220 2,442 2,664 2,886 (K) 7604 21 00 Hollow profiles 2,220 N/A 2,220 2,442 2,664 2,886 (K) 7604 29 10 Bars and rods 2,200 N/A 2,200 2,420 2,640 2,860 (K) 7604 29 90 Profiles 2,220 N/A 2,220 2,442 2,664 2,886 (K) 7605 Aluminium wire 2,200 N/A 2,200 2,420 2,640 2,860 (K) 7606 Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm 2,660 N/A 2,660 2,926 3,192 3,458 (K) 7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm 2,660 N/A 2,660 2,926 3,192 3,458 (K) 7608 Aluminium tubes and pipes 2,220 N/A 2,220 2,442 2,664 2,886 (K) 7609 00 00 Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) 2,220 N/A 2,220 2,442 2,664 2,886 (K) 7610 10 00 Doors, windows and their frames and thresholds for doors 2,220 N/A 2,220 2,442 2,664 2,886 (K) 7610 90 Other 2,220 N/A 2,220 2,442 2,664 2,886 (K) 7610 90 10 Bridges and bridge-sections, towers and lattice masts 2,220 N/A 2,220 2,442 2,664 2,886 (K) 7610 90 90 Other 2,220 N/A 2,220 2,442 2,664 2,886 (K) 7611 00 00 Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 2,660 N/A 2,660 2,926 3,192 3,458 (K) 7612 Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 2,660 N/A 2,660 2,926 3,192 3,458 (K) 7613 00 00 Aluminium containers for compressed or liquefied gas 2,660 N/A 2,660 2,926 3,192 3,458 (K) 7614 Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated 2,200 N/A 2,200 2,420 2,640 2,860 (K) 7616 10 00 Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles 2,660 N/A 2,660 2,926 3,192 3,458 (K) 7616 91 00 Cloth, grill, netting and fencing, of aluminium wire 2,660 N/A 2,660 2,926 3,192 3,458 (K) 7616 99 10 Cast 1,980 N/A 1,980 2,178 2,376 2,574 (K) 7616 99 90 Other 2,660 N/A 2,660 2,926 3,192 3,458 (K) Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066   Belarus Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – – – –   2523 10 00 White clinker – – – – – –   2523 10 00 Grey clinker 1,340 0,030 1,370 1,507 1,644 1,781 (A) 2523 21 00 White Portland cement – – – – – –   2523 29 00 Grey Portland cement 1,340 0,050 1,390 1,529 1,668 1,807   2523 90 00 White hydraulic cements – – – – – –   2523 90 00 Grey hydraulic cements 1,270 0,050 1,330 1,463 1,596 1,729 (A) 2523 30 00 Aluminous cement – – – – – –   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 2,690 0,030 2,720 2,747 2,747 2,747   2814 10 00 Anhydrous ammonia 2,160 0,090 2,250 2,273 2,273 2,273   2814 20 00 Ammonia in aqueous solution 0,650 0,030 0,680 0,687 0,687 0,687   2834 21 00 Nitrate of potassium 2,170 0,040 2,220 2,242 2,242 2,242   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,470 0,020 0,490 0,495 0,495 0,495   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,780 0,020 0,800 0,808 0,808 0,808   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,410 0,070 1,480 1,495 1,495 1,495   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,380 0,070 1,450 1,465 1,465 1,465   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,620 0,050 0,670 0,677 0,677 0,677   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,390 0,060 1,450 1,465 1,465 1,465   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,640 0,040 1,690 1,707 1,707 1,707   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,530 0,070 2,600 2,626 2,626 2,626   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,150 0,060 2,220 2,242 2,242 2,242   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,150 0,060 2,220 2,242 2,242 2,242   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 4,200 0,050 4,250 4,293 4,293 4,293   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,120 0,060 2,180 2,202 2,202 2,202   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,580 0,060 1,630 1,646 1,646 1,646   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,610 0,060 1,670 1,687 1,687 1,687   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,800 0,050 0,860 0,869 0,869 0,869   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,050 0,060 1,120 1,131 1,131 1,131   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,710 0,050 0,760 0,768 0,768 0,768   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,500 0,040 0,540 0,545 0,545 0,545   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,320 0,030 0,350 0,354 0,354 0,354   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,450 0,080 1,530 1,545 1,545 1,545   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,570 0,080 0,650 0,657 0,657 0,657   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,430 0,050 1,470 1,485 1,485 1,485   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,730 0,030 0,760 0,768 0,768 0,768   Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 14,030 N/A 14,030 15,433 16,836 18,239   Benin Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – _ _ _   2523 10 00 White clinker – – – _ _ _   2523 10 00 Grey clinker 0,860 0,040 0,900 0,990 1,080 1,170 (A) 2523 21 00 White Portland cement – – – _ _ _   2523 29 00 Grey Portland cement 0,920 0,070 0,990 1,089 1,188 1,287   2523 90 00 White hydraulic cements – – – _ _ _   2523 90 00 Grey hydraulic cements 0,880 0,070 0,960 1,056 1,152 1,248 (A) 2523 30 00 Aluminous cement – – – _ _ _   Bolivia Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – _ _ _   2523 10 00 White clinker – – – _ _ _   2523 10 00 Grey clinker 0,870 0,030 0,900 0,990 1,080 1,170 (A) 2523 21 00 White Portland cement – – – _ _ _   2523 29 00 Grey Portland cement 0,870 0,060 0,930 1,023 1,116 1,209   2523 90 00 White hydraulic cements – – – _ _ _   2523 90 00 Grey hydraulic cements 0,830 0,060 0,890 0,979 1,068 1,157 (A) 2523 30 00 Aluminous cement – – – – – –   Aluminium         10 % mark-up 20 % mark-up 30 % mark-up   7601 Unwrought aluminium 0,360 N/A 0,360 0,396 0,432 0,468 (L) 7603 Aluminium powders and flakes 0,470 N/A 0,470 0,517 0,564 0,611 (L) 7604 10 10 Bars and rods 0,690 N/A 0,690 0,759 0,828 0,897 (L) 7604 10 90 Profiles 0,710 N/A 0,710 0,781 0,852 0,923 (L) 7604 21 00 Hollow profiles 0,710 N/A 0,710 0,781 0,852 0,923 (L) 7604 29 10 Bars and rods 0,690 N/A 0,690 0,759 0,828 0,897 (L) 7604 29 90 Profiles 0,710 N/A 0,710 0,781 0,852 0,923 (L) 7605 Aluminium wire 0,690 N/A 0,690 0,759 0,828 0,897 (L) 7606 Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm 1,150 N/A 1,150 1,265 1,380 1,495 (L) 7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm 1,150 N/A 1,150 1,265 1,380 1,495 (L) 7608 Aluminium tubes and pipes 0,710 N/A 0,710 0,781 0,852 0,923 (L) 7609 00 00 Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) 0,710 N/A 0,710 0,781 0,852 0,923 (L) 7610 10 00 Doors, windows and their frames and thresholds for doors 0,710 N/A 0,710 0,781 0,852 0,923 (L) 7610 90 Other 0,710 N/A 0,710 0,781 0,852 0,923 (L) 7610 90 10 Bridges and bridge-sections, towers and lattice masts 0,710 N/A 0,710 0,781 0,852 0,923 (L) 7610 90 90 Other 0,710 N/A 0,710 0,781 0,852 0,923 (L) 7611 00 00 Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 1,150 N/A 1,150 1,265 1,380 1,495 (L) 7612 Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 1,150 N/A 1,150 1,265 1,380 1,495 (L) 7613 00 00 Aluminium containers for compressed or liquefied gas 1,150 N/A 1,150 1,265 1,380 1,495 (L) 7614 Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated 0,690 N/A 0,690 0,759 0,828 0,897 (L) 7616 10 00 Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles 1,150 N/A 1,150 1,265 1,380 1,495 (L) 7616 91 00 Cloth, grill, netting and fencing, of aluminium wire 1,150 N/A 1,150 1,265 1,380 1,495 (L) 7616 99 10 Cast 0,470 N/A 0,470 0,517 0,564 0,611 (L) 7616 99 90 Other 1,150 N/A 1,150 1,265 1,380 1,495 (L) Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066   Bosnia and Herzegovina Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – – – –   2523 10 00 White clinker – – – – – –   2523 10 00 Grey clinker 0,860 0,060 0,920 1,012 1,104 1,196 (A) 2523 21 00 White Portland cement – – – – – –   2523 29 00 Grey Portland cement 0,880 0,100 0,980 1,078 1,176 1,274   2523 90 00 White hydraulic cements – – – – – –   2523 90 00 Grey hydraulic cements 0,840 0,100 0,940 1,034 1,128 1,222 (A) 2523 30 00 Aluminous cement – – – – – –   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 2,670 0,060 2,730 2,757 2,757 2,757   2814 10 00 Anhydrous ammonia – – – – – –   2814 20 00 Ammonia in aqueous solution 0,650 0,060 0,710 0,717 0,717 0,717   2834 21 00 Nitrate of potassium 2,160 0,090 2,260 2,283 2,283 2,283   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,490 0,050 0,540 0,545 0,545 0,545   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,810 0,050 0,860 0,869 0,869 0,869   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,470 0,150 1,620 1,636 1,636 1,636   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,440 0,150 1,590 1,606 1,606 1,606   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,640 0,110 0,750 0,758 0,758 0,758   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,400 0,130 1,520 1,535 1,535 1,535   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,640 0,100 1,740 1,757 1,757 1,757   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,520 0,150 2,670 2,697 2,697 2,697   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,160 0,140 2,300 2,323 2,323 2,323   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,160 0,140 2,300 2,323 2,323 2,323   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 4,160 0,100 4,260 4,303 4,303 4,303   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,110 0,130 2,240 2,262 2,262 2,262   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,590 0,120 1,710 1,727 1,727 1,727   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,640 0,140 1,780 1,798 1,798 1,798   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,810 0,120 0,920 0,929 0,929 0,929   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,060 0,140 1,200 1,212 1,212 1,212   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,720 0,110 0,820 0,828 0,828 0,828   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,510 0,080 0,590 0,596 0,596 0,596   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,320 0,070 0,390 0,394 0,394 0,394   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,460 0,170 1,630 1,646 1,646 1,646   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,590 0,130 0,720 0,727 0,727 0,727   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,420 0,100 1,530 1,545 1,545 1,545   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,730 0,070 0,800 0,808 0,808 0,808   Aluminium         10 % mark-up 20 % mark-up 30 % mark-up   7601 Unwrought aluminium 1,700 N/A 1,700 1,870 2,040 2,210 (K) 7603 Aluminium powders and flakes 3,279 N/A 3,279 3,607 3,935 4,263 (K) 7604 10 10 Bars and rods 3,059 N/A 3,059 3,365 3,671 3,977 (K) 7604 10 90 Profiles 3,059 N/A 3,059 3,365 3,671 3,977 (K) 7604 21 00 Hollow profiles 3,059 N/A 3,059 3,365 3,671 3,977 (K) 7604 29 10 Bars and rods 3,059 N/A 3,059 3,365 3,671 3,977 (K) 7604 29 90 Profiles 3,059 N/A 3,059 3,365 3,671 3,977 (K) 7605 Aluminium wire 3,703 N/A 3,703 4,073 4,443 4,813 (K) 7606 Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm 4,532 N/A 4,532 4,985 5,438 5,891 (K) 7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm 4,532 N/A 4,532 4,985 5,438 5,891 (K) 7608 Aluminium tubes and pipes 3,721 N/A 3,721 4,093 4,465 4,837 (K) 7609 00 00 Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) 3,721 N/A 3,721 4,093 4,465 4,837 (K) 7610 10 00 Doors, windows and their frames and thresholds for doors 3,721 N/A 3,721 4,093 4,465 4,837 (K) 7610 90 Other 3,721 N/A 3,721 4,093 4,465 4,837 (K) 7610 90 10 Bridges and bridge-sections, towers and lattice masts 3,721 N/A 3,721 4,093 4,465 4,837 (K) 7610 90 90 Other 3,721 N/A 3,721 4,093 4,465 4,837 (K) 7611 00 00 Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 4,532 N/A 4,532 4,985 5,438 5,891 (K) 7612 Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 4,532 N/A 4,532 4,985 5,438 5,891 (K) 7613 00 00 Aluminium containers for compressed or liquefied gas 4,532 N/A 4,532 4,985 5,438 5,891 (K) 7614 Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated 3,703 N/A 3,703 4,073 4,443 4,813 (K) 7616 10 00 Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles 4,532 N/A 4,532 4,985 5,438 5,891 (K) 7616 91 00 Cloth, grill, netting and fencing, of aluminium wire 4,532 N/A 4,532 4,985 5,438 5,891 (K) 7616 99 10 Cast 3,279 N/A 3,279 3,607 3,935 4,263 (K) 7616 99 90 Other 4,532 N/A 4,532 4,985 5,438 5,891 (K) Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066   Iron and steel         10 % mark-up 20 % mark-up 30 % mark-up   2601 12 00 Agglomerated iron ores and concentrates (excl. roasted iron pyrites) 0,090 0,090 0,190 0,209 0,228 0,247   7201 Pig iron and spiegeleisen, in pigs, blocks or other primary forms 2,160 N/A 2,160 2,376 2,592 2,808   7202 11 Ferro-manganese, containing by weight > 2% of carbon – N/A – _ _ _   7202 19 Ferro-manganese, containing by weight <= 2% carbon – N/A – _ _ _   7202 41 Ferro-chromium, containing by weight > 4% of carbon – N/A – _ _ _   7202 49 Ferro-chromium, containing by weight <= 4% of carbon – N/A – _ _ _   7202 60 00 Ferro-nickel – N/A – _ _ _   7203 Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99,94%, in lumps, pellets or similar forms – N/A – _ _ _   7205 Granules and powders of pig iron, spiegeleisen, iron or steel (excl. granules and powders of ferro-alloys, turnings and filings of iron or steel, radioactive iron powders "isotopes" and certain low-calibre, substandard balls for ballbearings) 2,200 N/A 2,200 2,420 2,640 2,860 (C) 7206 Iron and non-alloy steel in ingots or other primary forms (excl. remelting scrap ingots, products obtained by continuous casting and iron of heading 7203) see below see below see below see below see below see below   7206 10 00 Ingots, of iron and non-alloy steel (excl. remelted scrap ingots, continuous cast products, iron of heading 7203) 2,290 N/A 2,290 2,519 2,748 2,977 (C) 7206 90 00 Iron and non-alloy steel, in puddled bars or other primary forms (excl. ingots, remelted scrap ingots, continuous cast products, iron of heading 7203) 2,290 N/A 2,290 2,519 2,748 2,977 (C) 7207 Semi-finished products of iron or non-alloy steel see below see below see below see below see below see below   7207 11 11 Semi-finished products, of non-alloy free-cutting steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting 2,340 N/A 2,340 2,574 2,808 3,042 (C) 7207 11 14 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness of <= 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel) 2,340 N/A 2,340 2,574 2,808 3,042 (C) 7207 11 16 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness of > 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel) 2,340 N/A 2,340 2,574 2,808 3,042 (C) 7207 11 90 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular cross-section, the width < twice the thickness, forged 2,290 N/A 2,290 2,519 2,748 2,977 (C) 7207 12 10 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtained by continuous casting 2,340 N/A 2,340 2,574 2,808 3,042 (C) 7207 12 90 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular "other than square" cross-section, the width >= twice the thickness, forged 2,290 N/A 2,290 2,519 2,748 2,977 (C) 7207 19 12 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting 2,340 N/A 2,340 2,574 2,808 3,042 (C) 7207 19 19 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, forged 2,290 N/A 2,290 2,519 2,748 2,977 (C) 7207 19 80 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon (excl. semi-products, of square, rectangular, circular or polygonal cross-section) 2,340 N/A 2,340 2,574 2,808 3,042 (C) 7207 20 11 Semi-finished products, of non-alloy free-cutting steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting 2,340 N/A 2,340 2,574 2,808 3,042 (C) 7207 20 15 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% but < 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel) 2,340 N/A 2,340 2,574 2,808 3,042 (C) 7207 20 17 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel) 2,340 N/A 2,340 2,574 2,808 3,042 (C) 7207 20 19 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, forged 2,290 N/A 2,290 2,519 2,748 2,977 (C) 7207 20 32 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtained by continuous casting 2,340 N/A 2,340 2,574 2,808 3,042 (C) 7207 20 39 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of rectangular "other than square" cross-section and the width >= twice the thickness, forged 2,290 N/A 2,290 2,519 2,748 2,977 (C) 7207 20 52 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting 2,340 N/A 2,340 2,574 2,808 3,042 (C) 7207 20 59 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of circular or polygonal cross-section, forged 2,290 N/A 2,290 2,519 2,748 2,977 (C) 7207 20 80 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon (excl. those of square, rectangular, circular or polygonal cross-section) 2,340 N/A 2,340 2,574 2,808 3,042 (C) 7208 Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled, not clad, plated or coated 2,290 N/A 2,290 2,519 2,748 2,977 (C) 7209 Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, cold-rolled "cold-reduced", not clad, plated or coated 2,290 N/A 2,290 2,519 2,748 2,977 (C) 7210 Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated 2,290 N/A 2,290 2,519 2,748 2,977 (C) 7211 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", not clad, plated or coated see below see below see below see below see below see below   7211 13 00 Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as "wide flats" 2,290 N/A 2,290 2,519 2,748 2,977 (C) 7211 14 00 Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, not further worked than hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm (excl. "wide flats") 2,290 N/A 2,290 2,519 2,748 2,977 (C) 7211 19 00 Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, simply hot-rolled, not clad, plated or coated, of a thickness < 4,75 mm (excl. "wide flats") 2,290 N/A 2,290 2,519 2,748 2,977 (C) 7211 23 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight < 0,25% of carbon 2,290 N/A 2,290 2,519 2,748 2,977 (C) 7211 29 00 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight >= 0,25% of carbon 2,290 N/A 2,290 2,519 2,748 2,977 (C) 7211 90 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked, but not clad, plated or coated 2,290 N/A 2,290 2,519 2,748 2,977 (C) 7212 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated 2,290 N/A 2,290 2,519 2,748 2,977 (C) 7213 Bars and rods of iron or non-alloy steel, hot-rolled, in irregularly wound coils 2,340 N/A 2,340 2,574 2,808 3,042 (C) 7214 Bars and rods, of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but incl. those twisted after rolling (excl. in irregularly wound coils) see below see below see below see below see below see below   7214 10 00 Bars and rods, of iron or non-alloy steel, not further worked than forged (excl. in irregularly wound coils) 2,290 N/A 2,290 2,519 2,748 2,977 (C) 7214 20 00 Bars and rods, of iron or non-alloy steel, with indentations, ribs, groves or other deformations produced during the rolling process 2,340 N/A 2,340 2,574 2,808 3,042 (C) 7214 30 00 Bars and rods, of non-alloy free-cutting steel, not further worked than hot-rolled, hot-drawn or hot-extruded (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling) 2,340 N/A 2,340 2,574 2,808 3,042 (C) 7214 91 Bars and rods, of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, of rectangular "other than square" cross-section (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process, bars and rods twisted after rolling and free-cutting steel) 2,340 N/A 2,340 2,574 2,808 3,042 (C) 7214 99 Bars and rods, of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded (excl. of rectangular [other than square] cross-section and those containing indentations, ribs, grooves or other deformations produced during the rolling process, and of non-alloy free-cutting steel) 2,340 N/A 2,340 2,574 2,808 3,042 (C) 7215 Bars and rods, of iron or non-alloy steel, cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked, n.e.s. 2,340 N/A 2,340 2,574 2,808 3,042 (C) 7216 Angles, shapes and sections of iron or non-alloy steel, n.e.s. 2,340 N/A 2,340 2,574 2,808 3,042 (C) 7217 Wire of iron or non-alloy steel, in coils (excl. bars and rods) see below see below see below see below see below see below   7217 10 Wire of iron or non-alloy steel, in coils, not plated or coated, whether or not polished (excl. bars and rods) 2,340 N/A 2,340 2,574 2,808 3,042 (C) 7217 20 Wire of iron or non-alloy steel, in coils, plated or coated with zinc (excl. bars and rods) 2,340 N/A 2,340 2,574 2,808 3,042 (C) 7217 30 Wire of iron or non-alloy steel, in coils, plated or coated with base metals (excl. plated or coated with zinc, and bars and rods) 2,340 N/A 2,340 2,574 2,808 3,042 (C) 7217 90 Wire of iron or non-alloy steel, in coils, plated or coated (excl. plated or coated with base metals, and bars and rods) 2,340 N/A 2,340 2,574 2,808 3,042 (C) 7218 Stainless steel in ingots or other primary forms (excl. remelting scrap ingots and products obtained by continuous casting); semi-finished products of stainless steel see below see below see below see below see below see below   7218 10 00 Steel, stainless, in ingots and other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) 3,110 N/A 3,110 3,421 3,732 4,043   7218 91 Semi-finished products of stainless steel, of rectangular "other than square" cross-section 3,110 N/A 3,110 3,421 3,732 4,043   7218 99 11 Semi-finished products of stainless steel, of square cross-section, rolled or obtained by continuous casting 3,110 N/A 3,110 3,421 3,732 4,043   7218 99 19 Semi-finished products of stainless steel, of square cross-section, forged 3,110 N/A 3,110 3,421 3,732 4,043   7218 99 20 Semi-finished products of stainless steel, of circular cross-section or of cross-section other than square or rectangular, rolled or obtained by continuous casting 3,110 N/A 3,110 3,421 3,732 4,043   7218 99 80 Semi-finished products of stainless steel, forged (excl. products of square or rectangular cross-section) 3,110 N/A 3,110 3,421 3,732 4,043   7219 Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7219 11 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of > 10 mm 3,110 N/A 3,110 3,421 3,732 4,043   7219 12 Flat-rolled products of stainless steel, of a width of>= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 4,7 mm and <= 10 mm 3,110 N/A 3,110 3,421 3,732 4,043   7219 13 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 3 mm and < 4,75 mm 3,110 N/A 3,110 3,421 3,732 4,043   7219 14 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of < 3 mm 3,110 N/A 3,110 3,421 3,732 4,043   7219 21 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of > 10 mm 3,110 N/A 3,110 3,421 3,732 4,043   7219 22 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 4,75 mm and <= 10 mm 3,110 N/A 3,110 3,421 3,732 4,043   7219 23 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 3 mm and < 4,75 mm 3,110 N/A 3,110 3,421 3,732 4,043   7219 24 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of < 3 mm 3,110 N/A 3,110 3,421 3,732 4,043   7219 31 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 4,75 mm 3,110 N/A 3,110 3,421 3,732 4,043   7219 32 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 3 mm but < 4,75 mm 3,110 N/A 3,110 3,421 3,732 4,043   7219 33 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of > 1 mm but < 3 mm 3,110 N/A 3,110 3,421 3,732 4,043   7219 34 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 0,5 mm but <= 1 mm 3,110 N/A 3,110 3,421 3,732 4,043   7219 35 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of < 0,5 mm 3,110 N/A 3,110 3,421 3,732 4,043   7219 90 Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked 3,110 N/A 3,110 3,421 3,732 4,043   7220 Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7220 11 00 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of >= 4,75 mm 3,110 N/A 3,110 3,421 3,732 4,043   7220 12 00 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of < 4,75 mm 3,110 N/A 3,110 3,421 3,732 4,043   7220 20 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" 3,110 N/A 3,110 3,421 3,732 4,043   7220 90 Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked 3,110 N/A 3,110 3,421 3,732 4,043   7221 Bars and rods of stainless steel, hot-rolled, in irregularly wound coils 3,270 N/A 3,270 3,597 3,924 4,251   7222 Other bars and rods of stainless steel; angles, shapes and sections of stainless steel, n.e.s. see below see below see below see below see below see below   7222 11 Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only hot-extruded, of circular cross-section 3,270 N/A 3,270 3,597 3,924 4,251   7222 19 Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only extruded (excl. of circular cross-section) 3,270 N/A 3,270 3,597 3,924 4,251   7222 20 Other bars and rods of stainless steel, not further worked than cold-formed or cold-finished 3,270 N/A 3,270 3,597 3,924 4,251   7222 30 Other bars and rods of stainless steel, cold-formed or cold-finished and further worked, or not further worked than forged, or forged, or hot-formed by other means and further worked, n.e.s. 3,110 N/A 3,110 3,421 3,732 4,043   7222 40 Angles, shapes and sections of stainless steel, n.e.s. 3,270 N/A 3,270 3,597 3,924 4,251   7223 Wire of stainless steel, in coils (excl. bars and rods) see below see below see below see below see below see below   7223 00 Wire of stainless steel, in coils (excl. bars and rods) 3,270 N/A 3,270 3,597 3,924 4,251   7224 Steel, alloy, other than stainless, in ingots or other primary forms, semi-finished products of alloy steel other than stainless (excl. waste and scrap in ingot form, and products obtained by continuous casting) see below see below see below see below see below see below   7224 10 Steel, alloy, other than stainless, in ingots or other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) 3,460 N/A 3,460 3,806 4,152 4,498 (F) 7224 90 02 Semi-finished products of tool steel 3,460 N/A 3,460 3,806 4,152 4,498 (F) 7224 90 03 Semi-finished products of high-speed steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting the width measuring < twice the thickness 3,460 N/A 3,460 3,806 4,152 4,498 (F) 7224 90 05 Semi-finished products of steel containing by weight <= 0,7% of carbon, 0,5% to 1,2% of manganese, 0,6% to 2,3% of silicon, or of steel containing by weight >= 0,0008% of boron with any other element < the minimum content referred to in Note 1 f to chapter 72, of square or rectangular cross-section, hot rolled or obtained by continuous casting, the width measuring < twice the thickness 3,460 N/A 3,460 3,806 4,152 4,498 (F) 7224 90 07 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring < twice the thickness (excl. of tool steel, high-speed steel and articles of subheading 7224.90.05) 3,460 N/A 3,460 3,806 4,152 4,498 (F) 7224 90 14 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring >= twice the thickness (excl. of tool steel) 3,460 N/A 3,460 3,806 4,152 4,498 (F) 7224 90 18 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, forged (excl. of tool steel) 3,460 N/A 3,460 3,806 4,152 4,498 (F) 7224 90 31 Semi-finished products of steel containing by weight 0,9% to 1,15% carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting 3,460 N/A 3,460 3,806 4,152 4,498 (F) 7224 90 38 Semi-finished products of alloy steel, other than stainless steel, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting (excl. of tool steel and products containing by weight 0,9% to 1,15% of carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum) 3,460 N/A 3,460 3,806 4,152 4,498 (F) 7224 90 90 Semi-finished products of alloy steel, other than stainless steel, forged (excl. of tool steel and products of square or rectangular, circular or polygamol cross-section) 3,460 N/A 3,460 3,806 4,152 4,498 (F) 7225 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7225 11 00 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, grain-oriented 4,590 N/A 4,590 5,049 5,508 5,967 (C) 7225 19 10 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, hot-rolled 3,460 N/A 3,460 3,806 4,152 4,498 (C) 7225 19 90 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, cold-rolled "cold-reduced", non-grain-oriented 3,460 N/A 3,460 3,806 4,152 4,498 (F) 7225 30 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, in coils (excl. products of silicon-electrical steel) 3,460 N/A 3,460 3,806 4,152 4,498 (F) 7225 40 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, not in coils (excl. products of silicon-electrical steel) 3,460 N/A 3,460 3,806 4,152 4,498 (F) 7225 50 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of silicon-electrical steel) 3,460 N/A 3,460 3,806 4,152 4,498 (F) 7225 91 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and electrolytically plated or coated with zinc (excl. products of silicon-electrical steel) 3,460 N/A 3,460 3,806 4,152 4,498 (F) 7225 92 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and plated or coated with zinc (excl. electrolytically plated or coated and products of silicon-electrical steel) 3,460 N/A 3,460 3,806 4,152 4,498 (F) 7225 99 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. plated or coated with zinc and products of silicon-electrical steel) 3,460 N/A 3,460 3,806 4,152 4,498 (F) 7226 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7226 11 00 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", grain-oriented 4,590 N/A 4,590 5,049 5,508 5,967 (C) 7226 19 10 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, not further worked than hot-rolled 3,460 N/A 3,460 3,806 4,152 4,498 (C) 7226 19 80 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, cold-rolled "cold-reduced", whether or not further worked, or hot-rolled and further worked, non-grain-oriented 3,460 N/A 3,460 3,806 4,152 4,498 (F) 7226 20 00 Flat-rolled products of high-speed steel, of a width of <= 600 mm, hot-rolled or cold-rolled "cold-reduced" 3,460 N/A 3,460 3,806 4,152 4,498 (F) 7226 91 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than hot-rolled (excl. products of high-speed steel or silicon-electrical steel) 3,460 N/A 3,460 3,806 4,152 4,498 (F) 7226 92 00 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of high-speed steel or silicon-electrical steel) 3,460 N/A 3,460 3,806 4,152 4,498 (F) 7226 99 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. products of high-speed steel or silicon-electrical steel) 3,460 N/A 3,460 3,806 4,152 4,498 (F) 7227 Bars and rods of alloy steel other than stainless, hot-rolled, in irregularly wound coils 3,620 N/A 3,620 3,982 4,344 4,706 (C)/(F) 7228 Other bars and rods of alloy steel other than stainless, angles, shapes and sections of alloy steel other than stainless, n.e.s.; hollow drill bars and rods, of alloy or non-alloy steel see below see below see below see below see below see below   7228 10 20 Bars and rods of high-speed steel, not further worked than hot-rolled, hot-drawn or extruded, and hot-rolled, hot-drawn or extruded, not further worked than clad (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,620 N/A 3,620 3,982 4,344 4,706 (F) 7228 10 50 Bars and rods of high-speed steel, forged (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,460 N/A 3,460 3,806 4,152 4,498 (F) 7228 10 90 Bars and rods of high-speed steel, not further worked than cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked (excl. forged products, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,620 N/A 3,620 3,982 4,344 4,706 (F) 7228 20 Bars and rods of silico-manganese steel (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,620 N/A 3,620 3,982 4,344 4,706 (F) 7228 30 Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,620 N/A 3,620 3,982 4,344 4,706 (C)/(F) 7228 40 Bars and rods of alloy steel other than stainless, not further worked than forged (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,460 N/A 3,460 3,806 4,152 4,498 (F) 7228 50 Bars and rods of alloy steel other than stainless, not further worked than cold-formed or cold-finished (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,620 N/A 3,620 3,982 4,344 4,706 (C)/(F) 7228 60 Bars and rods of alloy steel other than stainless, cold-formed or cold-finished and further worked or hot-formed and further worked, n.e.s. (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,620 N/A 3,620 3,982 4,344 4,706 (F) 7228 70 Angles, shapes and sections of alloy steel other than stainless, n.e.s. 3,620 N/A 3,620 3,982 4,344 4,706 (F) 7228 80 00 Hollow drill bars and rods, of alloy or non-alloy steel 3,620 N/A 3,620 3,982 4,344 4,706 (F) 7229 Wire of alloy steel other than stainless, in coils (excl. bars and rods) 3,620 N/A 3,620 3,982 4,344 4,706 (C)/(F) 7301 Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel 2,290 N/A 2,290 2,519 2,748 2,977 (C) 7302 Railway or tramway track construction material of iron or steel, the following : rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers "cross-ties", fish-plates, chairs, chair wedges, sole plates "base plates", rail clips, bedplates, ties and other material specialised for jointing or fixing rails 2,880 N/A 2,880 3,168 3,456 3,744 (C) 7303 Tubes, pipes and hollow profiles, of cast iron see below see below see below see below see below see below   7303 00 Tubes, pipes and hollow profiles, of cast iron 2,270 N/A 2,270 2,497 2,724 2,951   7304 Tubes, pipes and hollow profiles, seamless, of iron or steel (excl. products of cast iron) see below see below see below see below see below see below   7304 11 00 Line pipe of a kind used for oil or gas pipelines, seamless, of stainless steel 3,190 N/A 3,190 3,509 3,828 4,147   7304 19 Line pipe of a kind used for oil or gas pipelines, seamless, of iron or steel (excl. products of stainless steel or of cast iron) 2,370 N/A 2,370 2,607 2,844 3,081 (C) 7304 22 00 Drill pipe, seamless, of stainless steel, of a kind used in drilling for oil or gas 3,190 N/A 3,190 3,509 3,828 4,147   7304 23 00 Drill pipe, seamless, of a kind used in drilling for oil or gas, of iron or steel (excl. products of stainless steel or of cast iron) 2,370 N/A 2,370 2,607 2,844 3,081 (C) 7304 24 00 Casing and tubing, seamless, of a kind used for drilling for oil or gas, of stainless steel 3,190 N/A 3,190 3,509 3,828 4,147   7304 29 Casing and tubing, seamless, of iron or steel, of a kind used in drilling for oil or gas (excl. products of cast iron) 2,370 N/A 2,370 2,607 2,844 3,081 (C) 7304 31 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" (excl. cast iron products and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used for drilling for oil or gas) 2,370 N/A 2,370 2,607 2,844 3,081 (C) 7304 39 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, not cold-drawn or cold-rolled "cold-reduced" (excl. cast iron products, line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas) 2,370 N/A 2,370 2,607 2,844 3,081 (C) 7304 41 00 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas) 3,190 N/A 3,190 3,509 3,828 4,147   7304 49 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines or of a kind used for drilling for oil or gas) 3,190 N/A 3,190 3,509 3,828 4,147   7304 51 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil) 2,290 N/A 2,290 2,519 2,748 2,977 (F) 7304 59 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil) 2,290 N/A 2,290 2,519 2,748 2,977 (C)/(F) 7304 90 00 Tubes, pipes and hollow profiles, seamless, of non-circular cross-section, of iron or steel (excl. products of cast iron) 2,370 N/A 2,370 2,607 2,844 3,081 (C) 7305 Tubes and pipes, having circular cross-sections and an external diameter of > 406,4 mm, of flat-rolled products of iron or steel "e.g., welded, riveted or similarly closed" 2,290 N/A 2,290 2,519 2,748 2,977 (C) 7306 Tubes, pipes and hollow profiles "e.g., open seam or welded, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless tubes and pipes and tubes having internal and external circular cross-sections and an external diameter of > 406,4 mm) see below see below see below see below see below see below   7306 11 00 Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm 3,110 N/A 3,110 3,421 3,732 4,043   7306 19 00 Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron) 2,290 N/A 2,290 2,519 2,748 2,977 (C) 7306 21 00 Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm 3,110 N/A 3,110 3,421 3,732 4,043   7306 29 00 Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron) 2,290 N/A 2,290 2,519 2,748 2,977 (C) 7306 30 12 Precision tubes, welded, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" 2,290 N/A 2,290 2,519 2,748 2,977 (C) 7306 30 18 Precision tubes, welded, of circular cross-section, of iron or non-alloy steel (excl. cold-drawn or cold-rolled) 2,290 N/A 2,290 2,519 2,748 2,977   7306 30 41 Threaded or threadable tubes "gas pipe", welded, of circular cross-section, of iron or non-alloy steel, plated or coated with zinc 2,290 N/A 2,290 2,519 2,748 2,977 (C) 7306 30 49 Threaded or threadable tubes "gas pipe", welded, of circular cross-section, of iron or non-alloy steel (excl. products plated or coated with zinc) 2,290 N/A 2,290 2,519 2,748 2,977 (C) 7306 30 72 Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel, of an external diameter of <= 168,3 mm, plated or coated with zinc (excl. line pipe of a kind used for oil or gas pipelines or casing and tubingof a kind used in drilling for oil or gas) 2,290 N/A 2,290 2,519 2,748 2,977 (C) 7306 30 77 Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel of an external diameter of <= 168,3 mm (excl. plated or coated with zinc and line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used in drilling for oil or gas, precision tubes and threaded or threadable tubes "gas pipe") 2,290 N/A 2,290 2,519 2,748 2,977 (C) 7306 30 80 Tubes, pipes and hollow profiles, welded, having a circular cross-section, of iron or steel, of an external diameter of > 168,3 mm but <= 406,4 mm (excl. line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, or precision steel tubes, electrical conduit tubes or threaded or threadable tubes "gas pipe") 2,290 N/A 2,290 2,519 2,748 2,977 (C) 7306 40 20 Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. products having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) 3,110 N/A 3,110 3,421 3,732 4,043   7306 40 80 Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel (excl. products cold-drawn or cold-rolled "cold-reduced", tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) 3,110 N/A 3,110 3,421 3,732 4,043   7306 50 21 Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" 2,210 N/A 2,210 2,431 2,652 2,873 (F) 7306 50 29 Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless (excl. cold-drawn or cold-rolled) 2,210 N/A 2,210 2,431 2,652 2,873 (F) 7306 50 80 Tubes, pipes and hollow profiles, welded, of circular cross-section, of alloy steel other than stainless (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and precision steel tubes) 2,210 N/A 2,210 2,431 2,652 2,873 (F) 7306 61 10 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel 3,110 N/A 3,110 3,421 3,732 4,043   7306 61 92 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of <= 2 mm 2,290 N/A 2,290 2,519 2,748 2,977 (C) 7306 61 99 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of > 2 mm 2,290 N/A 2,290 2,519 2,748 2,977 (C) 7306 69 10 Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) 3,110 N/A 3,110 3,421 3,732 4,043   7306 69 90 Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of iron or steel other than stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) 2,290 N/A 2,290 2,519 2,748 2,977 (C) 7306 90 00 Tubes, pipes and hollow profiles "e.g., open seam, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless or welded tubes and pipes and tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm) 2,290 N/A 2,290 2,519 2,748 2,977 (C) 7307 Tube or pipe fittings "e.g. couplings, elbows, sleeves", of iron or steel see below see below see below see below see below see below   7307 11 Tube or pipe fittings of non-malleable cast iron 2,180 N/A 2,180 2,398 2,616 2,834   7307 19 10 Tube or pipe fittings of cast iron (excl. of non-malleable) 2,180 N/A 2,180 2,398 2,616 2,834   7307 19 90 Cast tube or pipe fittings of steel 2,290 N/A 2,290 2,519 2,748 2,977   7307 21 00 Flanges of stainless steel (excl. cast products) 2,860 N/A 2,860 3,146 3,432 3,718   7307 22 Threaded elbows, bends and sleeves of stainless steel (excl. cast products) 2,860 N/A 2,860 3,146 3,432 3,718   7307 23 Butt welding tube or pipe fittings of stainless steel (excl. cast products) 2,860 N/A 2,860 3,146 3,432 3,718   7307 29 Tube or pipe fittings of stainless steel (excl. cast products, flanges, threaded elbows, bends and sleeves and butt weldings fittings) 2,860 N/A 2,860 3,146 3,432 3,718   7307 91 00 Flanges of iron or steel (excl. cast or stainless products) 2,370 N/A 2,370 2,607 2,844 3,081 (C) 7307 92 Threaded elbows, bends and sleeves, of stainless steel (excl. cast or stainless products) 2,370 N/A 2,370 2,607 2,844 3,081 (C) 7307 93 Butt welding fittings of iron or steel (excl. cast iron or stainless steel products, and flanges) 2,370 N/A 2,370 2,607 2,844 3,081 (C) 7307 99 Tube or pipe fittings, of iron or steel (excl. cast iron or stainless steel products; flanges; threaded elbows, bends and sleeves; butt welding fittings) 2,370 N/A 2,370 2,607 2,844 3,081 (C) 7308 Structures and parts of structures "e.g., bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns", of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel (excl. prefabricated buildings of heading 9406) 2,850 N/A 2,850 3,135 3,420 3,705 (C) 7309 Reservoirs, tanks, vats and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of > 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated (excl. containers specifically constructed or equipped for one or more types of transport) 3,020 N/A 3,020 3,322 3,624 3,926 (C) 7310 Tanks, casks, drums, cans, boxes and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of <= 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated, n.e.s. 2,290 N/A 2,290 2,519 2,748 2,977 (C) 7311 Containers of iron or steel, for compressed or liquefied gas (excl. containers specifically constructed or equipped for one or more types of transport) see below see below see below see below see below see below   7311 00 Containers of iron or steel, for compressed or liquefied gas (excl. containers specifically constructed or equipped for one or more types of transport) 3,080 N/A 3,080 3,388 3,696 4,004 (C) 7318 Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers, incl. spring washers, and similar articles, of iron or steel (excl. lag screws, stoppers, plugs and the like, threaded) see below see below see below see below see below see below   7318 11 00 Coach screws of iron or steel 2,340 N/A 2,340 2,574 2,808 3,042 (C) 7318 12 10 Wood screws of stainless steel (excl. coach screws) 3,170 N/A 3,170 3,487 3,804 4,121 (C) 7318 12 90 Wood screws of iron or steel other than stainless (excl. coach screws) 2,340 N/A 2,340 2,574 2,808 3,042 (C) 7318 13 00 Screw hooks and screw rings, of iron or steel 2,340 N/A 2,340 2,574 2,808 3,042 (C) 7318 14 10 Self-tapping screws, of stainless steel (excl. wood screws) 3,170 N/A 3,170 3,487 3,804 4,121 (C) 7318 14 91 Spaced-thread screws of iron or steel other than stainless 2,340 N/A 2,340 2,574 2,808 3,042 (C) 7318 14 99 Self-tapping screws of iron or steel other than stainless (excl. spaced-thread screws and wood screws) 2,340 N/A 2,340 2,574 2,808 3,042 (C) 7318 15 Threaded screws and bolts, of iron or steel, whether or not with their nuts and washers (excl. coach screws and other wood screws, screw hooks and screw rings, self-tapping screws, lag screws, stoppers, plugs and the like, threaded) 2,810 N/A 2,810 3,091 3,372 3,653 (C) 7318 16 Nuts of iron or steel 3,040 N/A 3,040 3,344 3,648 3,952 (C) 7318 19 00 Threaded articles, of iron or steel, n.e.s. 2,340 N/A 2,340 2,574 2,808 3,042 (C) 7318 21 00 Spring washers and other lock washers, of iron or steel 2,340 N/A 2,340 2,574 2,808 3,042 (C) 7318 22 00 Washers of iron or steel (excl. spring washers and other lock washers) 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7318 23 00 Rivets of iron or steel (excl. tubular and bifurcated rivets for particular uses) 2,350 N/A 2,350 2,585 2,820 3,055 (C) 7318 24 00 Cotters and cotter pins, of iron or steel 2,340 N/A 2,340 2,574 2,808 3,042 (C) 7318 29 00 Non-threaded articles, of iron or steel 2,340 N/A 2,340 2,574 2,808 3,042 (C) 7326 Articles of iron or steel, n.e.s. (excl. cast articles) see below see below see below see below see below see below   7326 11 00 Grinding balls and similar articles for mills, of iron or steel, forged or stamped, but not further worked 2,290 N/A 2,290 2,519 2,748 2,977 (C) 7326 19 Articles of iron or steel, forged or stamped, but not further worked, n.e.s. (excl. grinding balls and similar articles for mills) 2,290 N/A 2,290 2,519 2,748 2,977 (C) 7326 20 00 Articles of iron or steel wire, n.e.s. 2,340 N/A 2,340 2,574 2,808 3,042 (C) 7326 90 30 Ladders and steps, of iron or steel 2,340 N/A 2,340 2,574 2,808 3,042 (C) 7326 90 40 Pallets and similar platforms for handling goods, of iron or steel 2,340 N/A 2,340 2,574 2,808 3,042 (C) 7326 90 50 Reels for cables, piping and the like, of iron or steel 2,340 N/A 2,340 2,574 2,808 3,042 (C) 7326 90 60 Ventilators, non-mechanical, guttering, hooks and like articles used in the building industry, n.e.s., of iron or steel 2,340 N/A 2,340 2,574 2,808 3,042 (C) 7326 90 92 Articles of iron or steel, open-die forged, n.e.s. 2,290 N/A 2,290 2,519 2,748 2,977 (C) 7326 90 94 Articles of iron or steel, closed-die forged, n.e.s. 2,290 N/A 2,290 2,519 2,748 2,977 (C) 7326 90 96 Sintered articles of iron or steel, n.e.s. 2,290 N/A 2,290 2,519 2,748 2,977 (C) 7326 90 98 Articles of iron or steel, n.e.s. 2,290 N/A 2,290 2,519 2,748 2,977 (C) Brazil Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – _ _ _ (A) 2523 10 00 White clinker – – – _ _ _ (B) 2523 10 00 Grey clinker – – – _ _ _ (A) 2523 21 00 White Portland cement 1,220 0,120 1,340 1,474 1,608 1,742   2523 29 00 Grey Portland cement – – – _ _ _   2523 90 00 White hydraulic cements – – – _ _ _ (B) 2523 90 00 Grey hydraulic cements – – – _ _ _ (A) 2523 30 00 Aluminous cement 1,910 0,070 1,980 2,178 2,376 2,574   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 2,040 0,020 2,070 2,091 2,091 2,091   2814 10 00 Anhydrous ammonia 3,120 0,080 3,210 3,242 3,242 3,242   2814 20 00 Ammonia in aqueous solution 0,940 0,020 0,960 0,970 0,970 0,970   2834 21 00 Nitrate of potassium 1,930 0,040 1,960 1,980 1,980 1,980   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,670 0,020 0,690 0,697 0,697 0,697   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 1,110 0,020 1,130 1,141 1,141 1,141   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 2,020 0,060 2,070 2,091 2,091 2,091   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,970 0,050 2,030 2,050 2,050 2,050   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,890 0,040 0,930 0,939 0,939 0,939   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,440 0,040 1,480 1,495 1,495 1,495   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,470 0,030 1,500 1,515 1,515 1,515   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,260 0,050 2,310 2,333 2,333 2,333   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,940 0,040 1,990 2,010 2,010 2,010   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,940 0,040 1,990 2,010 2,010 2,010   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 3,190 0,040 3,230 3,262 3,262 3,262   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,890 0,040 1,940 1,959 1,959 1,959   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,650 0,040 1,690 1,707 1,707 1,707   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,860 0,050 1,910 1,929 1,929 1,929   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,870 0,040 0,910 0,919 0,919 0,919   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,990 0,040 1,030 1,040 1,040 1,040   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,680 0,030 0,710 0,717 0,717 0,717   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,730 0,030 0,750 0,758 0,758 0,758   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,460 0,020 0,480 0,485 0,485 0,485   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,340 0,050 1,390 1,404 1,404 1,404   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,820 0,070 0,900 0,909 0,909 0,909   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,310 0,030 1,340 1,353 1,353 1,353   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,680 0,020 0,700 0,707 0,707 0,707   Aluminium         10 % mark-up 20 % mark-up 30 % mark-up   7601 Unwrought aluminium 1,700 N/A 1,700 1,870 2,040 2,210 (K) 7603 Aluminium powders and flakes 1,820 N/A 1,820 2,002 2,184 2,366 (K) 7604 10 10 Bars and rods 2,040 N/A 2,040 2,244 2,448 2,652 (K) 7604 10 90 Profiles 2,060 N/A 2,060 2,266 2,472 2,678 (K) 7604 21 00 Hollow profiles 2,060 N/A 2,060 2,266 2,472 2,678 (K) 7604 29 10 Bars and rods 2,040 N/A 2,040 2,244 2,448 2,652 (K) 7604 29 90 Profiles 2,060 N/A 2,060 2,266 2,472 2,678 (K) 7605 Aluminium wire 2,040 N/A 2,040 2,244 2,448 2,652 (K) 7606 Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm 2,500 N/A 2,500 2,750 3 3,250 (K) 7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm 2,500 N/A 2,500 2,750 3 3,250 (K) 7608 Aluminium tubes and pipes 2,060 N/A 2,060 2,266 2,472 2,678 (K) 7609 00 00 Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) 2,060 N/A 2,060 2,266 2,472 2,678 (K) 7610 10 00 Doors, windows and their frames and thresholds for doors 2,060 N/A 2,060 2,266 2,472 2,678 (K) 7610 90 Other 2,060 N/A 2,060 2,266 2,472 2,678 (K) 7610 90 10 Bridges and bridge-sections, towers and lattice masts 2,060 N/A 2,060 2,266 2,472 2,678 (K) 7610 90 90 Other 2,060 N/A 2,060 2,266 2,472 2,678 (K) 7611 00 00 Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 2,500 N/A 2,500 2,750 3 3,250 (K) 7612 Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 2,500 N/A 2,500 2,750 3 3,250 (K) 7613 00 00 Aluminium containers for compressed or liquefied gas 2,500 N/A 2,500 2,750 3 3,250 (K) 7614 Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated 2,040 N/A 2,040 2,244 2,448 2,652 (K) 7616 10 00 Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles 2,500 N/A 2,500 2,750 3 3,250 (K) 7616 91 00 Cloth, grill, netting and fencing, of aluminium wire 2,500 N/A 2,500 2,750 3 3,250 (K) 7616 99 10 Cast 1,820 N/A 1,820 2,002 2,184 2,366 (K) 7616 99 90 Other 2,500 N/A 2,500 2,750 3 3,250 (K) Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066   Iron and steel         10 % mark-up 20 % mark-up 30 % mark-up   2601 12 00 Agglomerated iron ores and concentrates (excl. roasted iron pyrites) 0,190 0,010 0,200 0,220 0,240 0,260   7201 Pig iron and spiegeleisen, in pigs, blocks or other primary forms 1,478 N/A 1,478 1,625 1,773 1,921   7202 11 Ferro-manganese, containing by weight > 2% of carbon 1,690 N/A 1,690 1,859 2,028 2,197   7202 19 Ferro-manganese, containing by weight <= 2% carbon – N/A – – – –   7202 41 Ferro-chromium, containing by weight > 4% of carbon 2,350 N/A 2,350 2,585 2,820 3,055   7202 49 Ferro-chromium, containing by weight <= 4% of carbon – N/A – – – –   7202 60 00 Ferro-nickel 3,480 N/A 3,480 3,828 4,176 4,524   7203 Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99,94%, in lumps, pellets or similar forms – N/A – – – –   7205 Granules and powders of pig iron, spiegeleisen, iron or steel (excl. granules and powders of ferro-alloys, turnings and filings of iron or steel, radioactive iron powders "isotopes" and certain low-calibre, substandard balls for ballbearings) 1,430 N/A 1,430 1,573 1,716 1,859 (C) 7206 Iron and non-alloy steel in ingots or other primary forms (excl. remelting scrap ingots, products obtained by continuous casting and iron of heading 7203) see below see below see below see below see below see below (F) 7206 10 00 Ingots, of iron and non-alloy steel (excl. remelted scrap ingots, continuous cast products, iron of heading 7203) 1,480 N/A 1,480 1,628 1,776 1,924 (C) 7206 90 00 Iron and non-alloy steel, in puddled bars or other primary forms (excl. ingots, remelted scrap ingots, continuous cast products, iron of heading 7203) 1,480 N/A 1,480 1,628 1,776 1,924 (C) 7207 Semi-finished products of iron or non-alloy steel see below see below see below see below see below see below (C) 7207 11 11 Semi-finished products, of non-alloy free-cutting steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting 1,610 N/A 1,610 1,771 1,932 2,093 (C) 7207 11 14 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness of <= 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel) 1,610 N/A 1,610 1,771 1,932 2,093 (C) 7207 11 16 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness of > 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel) 1,610 N/A 1,610 1,771 1,932 2,093 (C) 7207 11 90 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular cross-section, the width < twice the thickness, forged 2,440 N/A 2,440 2,684 2,928 3,172 (C) 7207 12 10 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtained by continuous casting 1,610 N/A 1,610 1,771 1,932 2,093 (C) 7207 12 90 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular "other than square" cross-section, the width >= twice the thickness, forged 2,440 N/A 2,440 2,684 2,928 3,172 (C) 7207 19 12 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting 1,610 N/A 1,610 1,771 1,932 2,093 (C) 7207 19 19 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, forged 2,440 N/A 2,440 2,684 2,928 3,172 (C) 7207 19 80 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon (excl. semi-products, of square, rectangular, circular or polygonal cross-section) 1,610 N/A 1,610 1,771 1,932 2,093 (C) 7207 20 11 Semi-finished products, of non-alloy free-cutting steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting 1,610 N/A 1,610 1,771 1,932 2,093 (C) 7207 20 15 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% but < 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel) 1,610 N/A 1,610 1,771 1,932 2,093 (C) 7207 20 17 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel) 1,610 N/A 1,610 1,771 1,932 2,093 (C) 7207 20 19 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, forged 2,440 N/A 2,440 2,684 2,928 3,172 (C) 7207 20 32 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtained by continuous casting 1,610 N/A 1,610 1,771 1,932 2,093 (C) 7207 20 39 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of rectangular "other than square" cross-section and the width >= twice the thickness, forged 2,440 N/A 2,440 2,684 2,928 3,172 (C) 7207 20 52 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting 1,610 N/A 1,610 1,771 1,932 2,093 (C) 7207 20 59 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of circular or polygonal cross-section, forged 2,440 N/A 2,440 2,684 2,928 3,172 (C) 7207 20 80 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon (excl. those of square, rectangular, circular or polygonal cross-section) 1,610 N/A 1,610 1,771 1,932 2,093 (C) 7208 Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled, not clad, plated or coated 1,620 N/A 1,620 1,782 1,944 2,106 (C) 7209 Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, cold-rolled "cold-reduced", not clad, plated or coated 1,730 N/A 1,730 1,903 2,076 2,249 (C) 7210 Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated 1,730 N/A 1,730 1,903 2,076 2,249 (C) 7211 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", not clad, plated or coated see below see below see below see below see below see below (C) 7211 13 00 Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as "wide flats" 1,620 N/A 1,620 1,782 1,944 2,106 (C) 7211 14 00 Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, not further worked than hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm (excl. "wide flats") 1,620 N/A 1,620 1,782 1,944 2,106 (C) 7211 19 00 Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, simply hot-rolled, not clad, plated or coated, of a thickness < 4,75 mm (excl. "wide flats") 1,620 N/A 1,620 1,782 1,944 2,106 (C) 7211 23 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight < 0,25% of carbon 1,730 N/A 1,730 1,903 2,076 2,249 (C) 7211 29 00 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight >= 0,25% of carbon 1,730 N/A 1,730 1,903 2,076 2,249 (C) 7211 90 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked, but not clad, plated or coated 1,730 N/A 1,730 1,903 2,076 2,249 (C) 7212 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated 1,730 N/A 1,730 1,903 2,076 2,249 (C) 7213 Bars and rods of iron or non-alloy steel, hot-rolled, in irregularly wound coils 1,610 N/A 1,610 1,771 1,932 2,093 (C) 7214 Bars and rods, of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but incl. those twisted after rolling (excl. in irregularly wound coils) see below see below see below see below see below see below (C) 7214 10 00 Bars and rods, of iron or non-alloy steel, not further worked than forged (excl. in irregularly wound coils) 2,440 N/A 2,440 2,684 2,928 3,172 (C) 7214 20 00 Bars and rods, of iron or non-alloy steel, with indentations, ribs, groves or other deformations produced during the rolling process 1,610 N/A 1,610 1,771 1,932 2,093 (C) 7214 30 00 Bars and rods, of non-alloy free-cutting steel, not further worked than hot-rolled, hot-drawn or hot-extruded (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling) 1,610 N/A 1,610 1,771 1,932 2,093 (C) 7214 91 Bars and rods, of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, of rectangular "other than square" cross-section (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process, bars and rods twisted after rolling and free-cutting steel) 1,610 N/A 1,610 1,771 1,932 2,093 (C) 7214 99 Bars and rods, of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded (excl. of rectangular [other than square] cross-section and those containing indentations, ribs, grooves or other deformations produced during the rolling process, and of non-alloy free-cutting steel) 1,610 N/A 1,610 1,771 1,932 2,093 (C) 7215 Bars and rods, of iron or non-alloy steel, cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked, n.e.s. 1,610 N/A 1,610 1,771 1,932 2,093 (C) 7216 Angles, shapes and sections of iron or non-alloy steel, n.e.s. 1,610 N/A 1,610 1,771 1,932 2,093 (C) 7217 Wire of iron or non-alloy steel, in coils (excl. bars and rods) see below see below see below see below see below see below (C) 7217 10 Wire of iron or non-alloy steel, in coils, not plated or coated, whether or not polished (excl. bars and rods) 1,640 N/A 1,640 1,804 1,968 2,132 (C) 7217 20 Wire of iron or non-alloy steel, in coils, plated or coated with zinc (excl. bars and rods) 1,640 N/A 1,640 1,804 1,968 2,132 (C) 7217 30 Wire of iron or non-alloy steel, in coils, plated or coated with base metals (excl. plated or coated with zinc, and bars and rods) 1,640 N/A 1,640 1,804 1,968 2,132 (C) 7217 90 Wire of iron or non-alloy steel, in coils, plated or coated (excl. plated or coated with base metals, and bars and rods) 1,640 N/A 1,640 1,804 1,968 2,132 (C) 7218 Stainless steel in ingots or other primary forms (excl. remelting scrap ingots and products obtained by continuous casting); semi-finished products of stainless steel see below see below see below see below see below see below   7218 10 00 Steel, stainless, in ingots and other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) 3,940 N/A 3,940 4,334 4,728 5,122   7218 91 Semi-finished products of stainless steel, of rectangular "other than square" cross-section 3,210 N/A 3,210 3,531 3,852 4,173   7218 99 11 Semi-finished products of stainless steel, of square cross-section, rolled or obtained by continuous casting 3,210 N/A 3,210 3,531 3,852 4,173   7218 99 19 Semi-finished products of stainless steel, of square cross-section, forged 3,940 N/A 3,940 4,334 4,728 5,122   7218 99 20 Semi-finished products of stainless steel, of circular cross-section or of cross-section other than square or rectangular, rolled or obtained by continuous casting 3,210 N/A 3,210 3,531 3,852 4,173   7218 99 80 Semi-finished products of stainless steel, forged (excl. products of square or rectangular cross-section) 3,940 N/A 3,940 4,334 4,728 5,122   7219 Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7219 11 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of > 10 mm 3,210 N/A 3,210 3,531 3,852 4,173   7219 12 Flat-rolled products of stainless steel, of a width of>= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 4,7 mm and <= 10 mm 3,210 N/A 3,210 3,531 3,852 4,173   7219 13 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 3 mm and < 4,75 mm 3,210 N/A 3,210 3,531 3,852 4,173   7219 14 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of < 3 mm 3,210 N/A 3,210 3,531 3,852 4,173   7219 21 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of > 10 mm 3,210 N/A 3,210 3,531 3,852 4,173   7219 22 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 4,75 mm and <= 10 mm 3,210 N/A 3,210 3,531 3,852 4,173   7219 23 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 3 mm and < 4,75 mm 3,210 N/A 3,210 3,531 3,852 4,173   7219 24 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of < 3 mm 3,210 N/A 3,210 3,531 3,852 4,173   7219 31 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 4,75 mm 3,320 N/A 3,320 3,652 3,984 4,316   7219 32 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 3 mm but < 4,75 mm 3,320 N/A 3,320 3,652 3,984 4,316   7219 33 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of > 1 mm but < 3 mm 3,320 N/A 3,320 3,652 3,984 4,316   7219 34 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 0,5 mm but <= 1 mm 3,320 N/A 3,320 3,652 3,984 4,316   7219 35 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of < 0,5 mm 3,320 N/A 3,320 3,652 3,984 4,316   7219 90 Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked 3,320 N/A 3,320 3,652 3,984 4,316   7220 Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7220 11 00 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of >= 4,75 mm 3,210 N/A 3,210 3,531 3,852 4,173   7220 12 00 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of < 4,75 mm 3,210 N/A 3,210 3,531 3,852 4,173   7220 20 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" 3,320 N/A 3,320 3,652 3,984 4,316   7220 90 Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked 3,320 N/A 3,320 3,652 3,984 4,316   7221 Bars and rods of stainless steel, hot-rolled, in irregularly wound coils 3,340 N/A 3,340 3,674 4,008 4,342   7222 Other bars and rods of stainless steel; angles, shapes and sections of stainless steel, n.e.s. see below see below see below see below see below see below   7222 11 Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only hot-extruded, of circular cross-section 3,340 N/A 3,340 3,674 4,008 4,342   7222 19 Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only extruded (excl. of circular cross-section) 3,340 N/A 3,340 3,674 4,008 4,342   7222 20 Other bars and rods of stainless steel, not further worked than cold-formed or cold-finished 3,340 N/A 3,340 3,674 4,008 4,342   7222 30 Other bars and rods of stainless steel, cold-formed or cold-finished and further worked, or not further worked than forged, or forged, or hot-formed by other means and further worked, n.e.s. 3,940 N/A 3,940 4,334 4,728 5,122   7222 40 Angles, shapes and sections of stainless steel, n.e.s. 3,340 N/A 3,340 3,674 4,008 4,342   7223 Wire of stainless steel, in coils (excl. bars and rods) see below see below see below see below see below see below   7223 00 Wire of stainless steel, in coils (excl. bars and rods) 3,370 N/A 3,370 3,707 4,044 4,381   7224 Steel, alloy, other than stainless, in ingots or other primary forms, semi-finished products of alloy steel other than stainless (excl. waste and scrap in ingot form, and products obtained by continuous casting) see below see below see below see below see below see below   7224 10 Steel, alloy, other than stainless, in ingots or other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) 4,380 N/A 4,380 4,818 5,256 5,694 (F) 7224 90 02 Semi-finished products of tool steel 3,650 N/A 3,650 4,015 4,380 4,745 (F) 7224 90 03 Semi-finished products of high-speed steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting the width measuring < twice the thickness 3,650 N/A 3,650 4,015 4,380 4,745 (F) 7224 90 05 Semi-finished products of steel containing by weight <= 0,7% of carbon, 0,5% to 1,2% of manganese, 0,6% to 2,3% of silicon, or of steel containing by weight >= 0,0008% of boron with any other element < the minimum content referred to in Note 1 f to chapter 72, of square or rectangular cross-section, hot rolled or obtained by continuous casting, the width measuring < twice the thickness 3,650 N/A 3,650 4,015 4,380 4,745 (F) 7224 90 07 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring < twice the thickness (excl. of tool steel, high-speed steel and articles of subheading 7224.90.05) 3,650 N/A 3,650 4,015 4,380 4,745 (F) 7224 90 14 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring >= twice the thickness (excl. of tool steel) 3,650 N/A 3,650 4,015 4,380 4,745 (F) 7224 90 18 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, forged (excl. of tool steel) 4,380 N/A 4,380 4,818 5,256 5,694 (F) 7224 90 31 Semi-finished products of steel containing by weight 0,9% to 1,15% carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting 3,650 N/A 3,650 4,015 4,380 4,745 (F) 7224 90 38 Semi-finished products of alloy steel, other than stainless steel, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting (excl. of tool steel and products containing by weight 0,9% to 1,15% of carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum) 3,650 N/A 3,650 4,015 4,380 4,745 (F) 7224 90 90 Semi-finished products of alloy steel, other than stainless steel, forged (excl. of tool steel and products of square or rectangular, circular or polygamol cross-section) 4,380 N/A 4,380 4,818 5,256 5,694 (F) 7225 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7225 11 00 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, grain-oriented 4,760 N/A 4,760 5,236 5,712 6,188 (C) 7225 19 10 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, hot-rolled 3,650 N/A 3,650 4,015 4,380 4,745 (C) 7225 19 90 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, cold-rolled "cold-reduced", non-grain-oriented 3,760 N/A 3,760 4,136 4,512 4,888 (F) 7225 30 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, in coils (excl. products of silicon-electrical steel) 3,650 N/A 3,650 4,015 4,380 4,745 (F) 7225 40 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, not in coils (excl. products of silicon-electrical steel) 3,650 N/A 3,650 4,015 4,380 4,745 (F) 7225 50 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of silicon-electrical steel) 3,760 N/A 3,760 4,136 4,512 4,888 (F) 7225 91 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and electrolytically plated or coated with zinc (excl. products of silicon-electrical steel) 3,760 N/A 3,760 4,136 4,512 4,888 (F) 7225 92 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and plated or coated with zinc (excl. electrolytically plated or coated and products of silicon-electrical steel) 3,760 N/A 3,760 4,136 4,512 4,888 (F) 7225 99 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. plated or coated with zinc and products of silicon-electrical steel) 3,760 N/A 3,760 4,136 4,512 4,888 (F) 7226 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7226 11 00 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", grain-oriented 4,760 N/A 4,760 5,236 5,712 6,188 (C) 7226 19 10 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, not further worked than hot-rolled 3,650 N/A 3,650 4,015 4,380 4,745 (C) 7226 19 80 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, cold-rolled "cold-reduced", whether or not further worked, or hot-rolled and further worked, non-grain-oriented 3,760 N/A 3,760 4,136 4,512 4,888 (F) 7226 20 00 Flat-rolled products of high-speed steel, of a width of <= 600 mm, hot-rolled or cold-rolled "cold-reduced" 3,650 N/A 3,650 4,015 4,380 4,745 (F) 7226 91 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than hot-rolled (excl. products of high-speed steel or silicon-electrical steel) 3,650 N/A 3,650 4,015 4,380 4,745 (F) 7226 92 00 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of high-speed steel or silicon-electrical steel) 3,760 N/A 3,760 4,136 4,512 4,888 (F) 7226 99 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. products of high-speed steel or silicon-electrical steel) 3,760 N/A 3,760 4,136 4,512 4,888 (F) 7227 Bars and rods of alloy steel other than stainless, hot-rolled, in irregularly wound coils 3,780 N/A 3,780 4,158 4,536 4,914 (C)/(F) 7228 Other bars and rods of alloy steel other than stainless, angles, shapes and sections of alloy steel other than stainless, n.e.s.; hollow drill bars and rods, of alloy or non-alloy steel see below see below see below see below see below see below   7228 10 20 Bars and rods of high-speed steel, not further worked than hot-rolled, hot-drawn or extruded, and hot-rolled, hot-drawn or extruded, not further worked than clad (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,780 N/A 3,780 4,158 4,536 4,914 (F) 7228 10 50 Bars and rods of high-speed steel, forged (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 4,380 N/A 4,380 4,818 5,256 5,694 (F) 7228 10 90 Bars and rods of high-speed steel, not further worked than cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked (excl. forged products, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,780 N/A 3,780 4,158 4,536 4,914 (F) 7228 20 Bars and rods of silico-manganese steel (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,780 N/A 3,780 4,158 4,536 4,914 (F) 7228 30 Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,780 N/A 3,780 4,158 4,536 4,914 (F) 7228 40 Bars and rods of alloy steel other than stainless, not further worked than forged (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 4,380 N/A 4,380 4,818 5,256 5,694 (F) 7228 50 Bars and rods of alloy steel other than stainless, not further worked than cold-formed or cold-finished (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,780 N/A 3,780 4,158 4,536 4,914 (C)/(F) 7228 60 Bars and rods of alloy steel other than stainless, cold-formed or cold-finished and further worked or hot-formed and further worked, n.e.s. (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,780 N/A 3,780 4,158 4,536 4,914 (F) 7228 70 Angles, shapes and sections of alloy steel other than stainless, n.e.s. 3,780 N/A 3,780 4,158 4,536 4,914 (C)/(F) 7228 80 00 Hollow drill bars and rods, of alloy or non-alloy steel 3,780 N/A 3,780 4,158 4,536 4,914 (F) 7229 Wire of alloy steel other than stainless, in coils (excl. bars and rods) 3,810 N/A 3,810 4,191 4,572 4,953 (C)/(F) 7301 Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel 1,730 N/A 1,730 1,903 2,076 2,249 (C) 7302 Railway or tramway track construction material of iron or steel, the following : rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers "cross-ties", fish-plates, chairs, chair wedges, sole plates "base plates", rail clips, bedplates, ties and other material specialised for jointing or fixing rails 2,720 N/A 2,720 2,992 3,264 3,536 (C) 7303 Tubes, pipes and hollow profiles, of cast iron see below see below see below see below see below see below   7303 00 Tubes, pipes and hollow profiles, of cast iron 2,900 N/A 2,900 3,190 3,480 3,770   7304 Tubes, pipes and hollow profiles, seamless, of iron or steel (excl. products of cast iron) see below see below see below see below see below see below   7304 11 00 Line pipe of a kind used for oil or gas pipelines, seamless, of stainless steel 3,150 N/A 3,150 3,465 3,780 4,095   7304 19 Line pipe of a kind used for oil or gas pipelines, seamless, of iron or steel (excl. products of stainless steel or of cast iron) 1,670 N/A 1,670 1,837 2,004 2,171 (C) 7304 22 00 Drill pipe, seamless, of stainless steel, of a kind used in drilling for oil or gas 3,150 N/A 3,150 3,465 3,780 4,095 (C) 7304 23 00 Drill pipe, seamless, of a kind used in drilling for oil or gas, of iron or steel (excl. products of stainless steel or of cast iron) 1,670 N/A 1,670 1,837 2,004 2,171   7304 24 00 Casing and tubing, seamless, of a kind used for drilling for oil or gas, of stainless steel 3,150 N/A 3,150 3,465 3,780 4,095   7304 29 Casing and tubing, seamless, of iron or steel, of a kind used in drilling for oil or gas (excl. products of cast iron) 1,670 N/A 1,670 1,837 2,004 2,171   7304 31 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" (excl. cast iron products and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used for drilling for oil or gas) 1,670 N/A 1,670 1,837 2,004 2,171 (F) 7304 39 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, not cold-drawn or cold-rolled "cold-reduced" (excl. cast iron products, line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas) 1,670 N/A 1,670 1,837 2,004 2,171 (C)/(F) 7304 41 00 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas) 3,150 N/A 3,150 3,465 3,780 4,095 (C) 7304 49 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines or of a kind used for drilling for oil or gas) 3,150 N/A 3,150 3,465 3,780 4,095   7304 51 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil) 1,650 N/A 1,650 1,815 1,980 2,145 (C) 7304 59 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil) 1,650 N/A 1,650 1,815 1,980 2,145 (C) 7304 90 00 Tubes, pipes and hollow profiles, seamless, of non-circular cross-section, of iron or steel (excl. products of cast iron) 1,670 N/A 1,670 1,837 2,004 2,171 (C) 7305 Tubes and pipes, having circular cross-sections and an external diameter of > 406,4 mm, of flat-rolled products of iron or steel "e.g., welded, riveted or similarly closed" 1,730 N/A 1,730 1,903 2,076 2,249 (C) 7306 Tubes, pipes and hollow profiles "e.g., open seam or welded, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless tubes and pipes and tubes having internal and external circular cross-sections and an external diameter of > 406,4 mm) see below see below see below see below see below see below   7306 11 00 Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm 3,320 N/A 3,320 3,652 3,984 4,316 (F) 7306 19 00 Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron) 1,740 N/A 1,740 1,914 2,088 2,262 (C) 7306 21 00 Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm 3,320 N/A 3,320 3,652 3,984 4,316   7306 29 00 Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron) 1,740 N/A 1,740 1,914 2,088 2,262   7306 30 12 Precision tubes, welded, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" 1,740 N/A 1,740 1,914 2,088 2,262 (C) 7306 30 18 Precision tubes, welded, of circular cross-section, of iron or non-alloy steel (excl. cold-drawn or cold-rolled) 1,630 N/A 1,630 1,793 1,956 2,119   7306 30 41 Threaded or threadable tubes "gas pipe", welded, of circular cross-section, of iron or non-alloy steel, plated or coated with zinc 1,740 N/A 1,740 1,914 2,088 2,262 (C) 7306 30 49 Threaded or threadable tubes "gas pipe", welded, of circular cross-section, of iron or non-alloy steel (excl. products plated or coated with zinc) 1,740 N/A 1,740 1,914 2,088 2,262   7306 30 72 Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel, of an external diameter of <= 168,3 mm, plated or coated with zinc (excl. line pipe of a kind used for oil or gas pipelines or casing and tubingof a kind used in drilling for oil or gas) 1,740 N/A 1,740 1,914 2,088 2,262 (C) 7306 30 77 Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel of an external diameter of <= 168,3 mm (excl. plated or coated with zinc and line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used in drilling for oil or gas, precision tubes and threaded or threadable tubes "gas pipe") 1,740 N/A 1,740 1,914 2,088 2,262 (C) 7306 30 80 Tubes, pipes and hollow profiles, welded, having a circular cross-section, of iron or steel, of an external diameter of > 168,3 mm but <= 406,4 mm (excl. line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, or precision steel tubes, electrical conduit tubes or threaded or threadable tubes "gas pipe") 1,740 N/A 1,740 1,914 2,088 2,262 (C) 7306 40 20 Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. products having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) 3,320 N/A 3,320 3,652 3,984 4,316 (C) 7306 40 80 Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel (excl. products cold-drawn or cold-rolled "cold-reduced", tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) 3,210 N/A 3,210 3,531 3,852 4,173 (F) 7306 50 21 Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" 1,830 N/A 1,830 2,013 2,196 2,379 (C) 7306 50 29 Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless (excl. cold-drawn or cold-rolled) 1,730 N/A 1,730 1,903 2,076 2,249 (F) 7306 50 80 Tubes, pipes and hollow profiles, welded, of circular cross-section, of alloy steel other than stainless (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and precision steel tubes) 1,830 N/A 1,830 2,013 2,196 2,379 (C) 7306 61 10 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel 3,320 N/A 3,320 3,652 3,984 4,316 (C) 7306 61 92 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of <= 2 mm 1,740 N/A 1,740 1,914 2,088 2,262 (C) 7306 61 99 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of > 2 mm 1,740 N/A 1,740 1,914 2,088 2,262 (C) 7306 69 10 Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) 3,320 N/A 3,320 3,652 3,984 4,316   7306 69 90 Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of iron or steel other than stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) 1,740 N/A 1,740 1,914 2,088 2,262   7306 90 00 Tubes, pipes and hollow profiles "e.g., open seam, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless or welded tubes and pipes and tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm) 1,740 N/A 1,740 1,914 2,088 2,262   7307 Tube or pipe fittings "e.g. couplings, elbows, sleeves", of iron or steel see below see below see below see below see below see below   7307 11 Tube or pipe fittings of non-malleable cast iron 2,320 N/A 2,320 2,552 2,784 3,016   7307 19 10 Tube or pipe fittings of cast iron (excl. of non-malleable) 2,320 N/A 2,320 2,552 2,784 3,016   7307 19 90 Cast tube or pipe fittings of steel 2,440 N/A 2,440 2,684 2,928 3,172 (C) 7307 21 00 Flanges of stainless steel (excl. cast products) 2,770 N/A 2,770 3,047 3,324 3,601   7307 22 Threaded elbows, bends and sleeves of stainless steel (excl. cast products) 2,770 N/A 2,770 3,047 3,324 3,601   7307 23 Butt welding tube or pipe fittings of stainless steel (excl. cast products) 2,770 N/A 2,770 3,047 3,324 3,601   7307 29 Tube or pipe fittings of stainless steel (excl. cast products, flanges, threaded elbows, bends and sleeves and butt weldings fittings) 2,770 N/A 2,770 3,047 3,324 3,601   7307 91 00 Flanges of iron or steel (excl. cast or stainless products) 1,650 N/A 1,650 1,815 1,980 2,145 (C) 7307 92 Threaded elbows, bends and sleeves, of stainless steel (excl. cast or stainless products) 1,650 N/A 1,650 1,815 1,980 2,145 (C) 7307 93 Butt welding fittings of iron or steel (excl. cast iron or stainless steel products, and flanges) 1,650 N/A 1,650 1,815 1,980 2,145 (C) 7307 99 Tube or pipe fittings, of iron or steel (excl. cast iron or stainless steel products; flanges; threaded elbows, bends and sleeves; butt welding fittings) 1,650 N/A 1,650 1,815 1,980 2,145 (C) 7308 Structures and parts of structures "e.g., bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns", of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel (excl. prefabricated buildings of heading 9406) 2,910 N/A 2,910 3,201 3,492 3,783 (C) 7309 Reservoirs, tanks, vats and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of > 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated (excl. containers specifically constructed or equipped for one or more types of transport) 3,120 N/A 3,120 3,432 3,744 4,056 (C) 7310 Tanks, casks, drums, cans, boxes and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of <= 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated, n.e.s. 1,740 N/A 1,740 1,914 2,088 2,262 (C) 7311 Containers of iron or steel, for compressed or liquefied gas (excl. containers specifically constructed or equipped for one or more types of transport) see below see below see below see below see below see below   7311 00 Containers of iron or steel, for compressed or liquefied gas (excl. containers specifically constructed or equipped for one or more types of transport) 3 N/A 3 3,300 3,600 3,900 (C) 7318 Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers, incl. spring washers, and similar articles, of iron or steel (excl. lag screws, stoppers, plugs and the like, threaded) see below see below see below see below see below see below   7318 11 00 Coach screws of iron or steel 1,610 N/A 1,610 1,771 1,932 2,093 (C) 7318 12 10 Wood screws of stainless steel (excl. coach screws) 3,110 N/A 3,110 3,421 3,732 4,043 (C) 7318 12 90 Wood screws of iron or steel other than stainless (excl. coach screws) 1,610 N/A 1,610 1,771 1,932 2,093 (C) 7318 13 00 Screw hooks and screw rings, of iron or steel 1,610 N/A 1,610 1,771 1,932 2,093 (C) 7318 14 10 Self-tapping screws, of stainless steel (excl. wood screws) 3,110 N/A 3,110 3,421 3,732 4,043 (C) 7318 14 91 Spaced-thread screws of iron or steel other than stainless 1,610 N/A 1,610 1,771 1,932 2,093 (C) 7318 14 99 Self-tapping screws of iron or steel other than stainless (excl. spaced-thread screws and wood screws) 1,610 N/A 1,610 1,771 1,932 2,093 (C) 7318 15 Threaded screws and bolts, of iron or steel, whether or not with their nuts and washers (excl. coach screws and other wood screws, screw hooks and screw rings, self-tapping screws, lag screws, stoppers, plugs and the like, threaded) 2,560 N/A 2,560 2,816 3,072 3,328 (C) 7318 16 Nuts of iron or steel 2,960 N/A 2,960 3,256 3,552 3,848 (C) 7318 19 00 Threaded articles, of iron or steel, n.e.s. 1,610 N/A 1,610 1,771 1,932 2,093 (C) 7318 21 00 Spring washers and other lock washers, of iron or steel 1,610 N/A 1,610 1,771 1,932 2,093 (C) 7318 22 00 Washers of iron or steel (excl. spring washers and other lock washers) 1,880 N/A 1,880 2,068 2,256 2,444 (C) 7318 23 00 Rivets of iron or steel (excl. tubular and bifurcated rivets for particular uses) 1,780 N/A 1,780 1,958 2,136 2,314 (C) 7318 24 00 Cotters and cotter pins, of iron or steel 1,610 N/A 1,610 1,771 1,932 2,093 (C) 7318 29 00 Non-threaded articles, of iron or steel 1,610 N/A 1,610 1,771 1,932 2,093 (C) 7326 Articles of iron or steel, n.e.s. (excl. cast articles) see below see below see below see below see below see below   7326 11 00 Grinding balls and similar articles for mills, of iron or steel, forged or stamped, but not further worked 2,440 N/A 2,440 2,684 2,928 3,172 (C) 7326 19 Articles of iron or steel, forged or stamped, but not further worked, n.e.s. (excl. grinding balls and similar articles for mills) 2,440 N/A 2,440 2,684 2,928 3,172 (C) 7326 20 00 Articles of iron or steel wire, n.e.s. 1,640 N/A 1,640 1,804 1,968 2,132 (C) 7326 90 30 Ladders and steps, of iron or steel 1,610 N/A 1,610 1,771 1,932 2,093 (C) 7326 90 40 Pallets and similar platforms for handling goods, of iron or steel 1,610 N/A 1,610 1,771 1,932 2,093 (C) 7326 90 50 Reels for cables, piping and the like, of iron or steel 1,610 N/A 1,610 1,771 1,932 2,093 (C) 7326 90 60 Ventilators, non-mechanical, guttering, hooks and like articles used in the building industry, n.e.s., of iron or steel 1,610 N/A 1,610 1,771 1,932 2,093 (C) 7326 90 92 Articles of iron or steel, open-die forged, n.e.s. 2,440 N/A 2,440 2,684 2,928 3,172 (C) 7326 90 94 Articles of iron or steel, closed-die forged, n.e.s. 2,440 N/A 2,440 2,684 2,928 3,172 (C) 7326 90 96 Sintered articles of iron or steel, n.e.s. 2,440 N/A 2,440 2,684 2,928 3,172 (C) 7326 90 98 Articles of iron or steel, n.e.s. 1,730 N/A 1,730 1,903 2,076 2,249 (C) Brunei Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – _ _ _   2523 10 00 White clinker – – – _ _ _   2523 10 00 Grey clinker – – – _ _ _   2523 21 00 White Portland cement – – – _ _ _   2523 29 00 Grey Portland cement 1,040 0,070 1,110 1,221 1,332 1,443   2523 90 00 White hydraulic cements – – – _ _ _   2523 90 00 Grey hydraulic cements – – – _ _ _   2523 30 00 Aluminous cement – – – _ _ _   Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066   Cambodia Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – _ _ _   2523 10 00 White clinker – – – _ _ _   2523 10 00 Grey clinker 0,870 0,030 0,900 0,990 1,080 1,170 (A) 2523 21 00 White Portland cement – – – _ _ _   2523 29 00 Grey Portland cement 0,870 0,060 0,920 1,012 1,104 1,196   2523 90 00 White hydraulic cements – – – _ _ _   2523 90 00 Grey hydraulic cements 0,830 0,060 0,890 0,979 1,068 1,157 (A) 2523 30 00 Aluminous cement – – – _ _ _   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 2,260 0,050 2,320 2,343 2,343 2,343   2814 10 00 Anhydrous ammonia – – – _ _ _   2814 20 00 Ammonia in aqueous solution 0,720 0,050 0,770 0,778 0,778 0,778   2834 21 00 Nitrate of potassium 1,940 0,070 2,020 2,040 2,040 2,040   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,870 0,040 0,910 0,919 0,919 0,919   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 1,440 0,040 1,480 1,495 1,495 1,495   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 2,610 0,120 2,730 2,757 2,757 2,757   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 2,550 0,120 2,670 2,697 2,697 2,697   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,700 0,080 0,780 0,788 0,788 0,788   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,330 0,100 1,430 1,444 1,444 1,444   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,470 0,070 1,550 1,566 1,566 1,566   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,270 0,110 2,380 2,404 2,404 2,404   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,950 0,100 2,050 2,071 2,071 2,071   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,950 0,100 2,050 2,071 2,071 2,071   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 3,530 0,080 3,610 3,646 3,646 3,646   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,900 0,100 2 2,020 2,020 2,020   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,850 0,090 1,940 1,959 1,959 1,959   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 2,150 0,110 2,260 2,283 2,283 2,283   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,780 0,080 0,870 0,879 0,879 0,879   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,970 0,100 1,070 1,081 1,081 1,081   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,660 0,070 0,730 0,737 0,737 0,737   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,560 0,060 0,620 0,626 0,626 0,626   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,360 0,050 0,410 0,414 0,414 0,414   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,330 0,120 1,450 1,465 1,465 1,465   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,640 0,110 0,750 0,758 0,758 0,758   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,290 0,080 1,370 1,384 1,384 1,384   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,660 0,050 0,720 0,727 0,727 0,727   Cameroon Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay 0,180 0,080 0,260 0,286 0,312 0,338 (A) 2523 10 00 White clinker – – – _ _ _   2523 10 00 Grey clinker – – – _ _ _   2523 21 00 White Portland cement – – – _ _ _   2523 29 00 Grey Portland cement – – – _ _ _   2523 90 00 White hydraulic cements – – – _ _ _   2523 90 00 Grey hydraulic cements – – – _ _ _   2523 30 00 Aluminous cement – – – _ _ _   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 1,810 0,060 1,870 1,889 1,889 1,889   2814 10 00 Anhydrous ammonia – – – _ _ _   2814 20 00 Ammonia in aqueous solution 0,690 0,060 0,750 0,758 0,758 0,758   2834 21 00 Nitrate of potassium 1,630 0,080 1,710 1,727 1,727 1,727   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,520 0,040 0,560 0,566 0,566 0,566   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,850 0,040 0,900 0,909 0,909 0,909   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,550 0,130 1,680 1,697 1,697 1,697   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,520 0,130 1,650 1,667 1,667 1,667   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,670 0,080 0,750 0,758 0,758 0,758   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,170 0,090 1,260 1,273 1,273 1,273   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,240 0,070 1,310 1,323 1,323 1,323   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,900 0,110 2,010 2,030 2,030 2,030   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,640 0,100 1,740 1,757 1,757 1,757   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,640 0,100 1,740 1,757 1,757 1,757   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,820 0,100 2,920 2,949 2,949 2,949   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,600 0,100 1,690 1,707 1,707 1,707   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,340 0,090 1,440 1,454 1,454 1,454   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,490 0,110 1,600 1,616 1,616 1,616   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,700 0,070 0,770 0,778 0,778 0,778   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,830 0,080 0,910 0,919 0,919 0,919   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,570 0,060 0,620 0,626 0,626 0,626   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,540 0,060 0,600 0,606 0,606 0,606   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,340 0,040 0,390 0,394 0,394 0,394   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,130 0,100 1,230 1,242 1,242 1,242   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,620 0,100 0,720 0,727 0,727 0,727   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,100 0,070 1,170 1,182 1,182 1,182   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,560 0,040 0,610 0,616 0,616 0,616   Aluminium         10 % mark-up 20 % mark-up 30 % mark-up   7601 Unwrought aluminium 1,700 N/A 1,700 1,870 2,040 2,210 (K) 7603 Aluminium powders and flakes 1,810 N/A 1,810 1,991 2,172 2,353 (K) 7604 10 10 Bars and rods 2,030 N/A 2,030 2,233 2,436 2,639 (K) 7604 10 90 Profiles 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7604 21 00 Hollow profiles 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7604 29 10 Bars and rods 2,030 N/A 2,030 2,233 2,436 2,639 (K) 7604 29 90 Profiles 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7605 Aluminium wire 2,030 N/A 2,030 2,233 2,436 2,639 (K) 7606 Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7608 Aluminium tubes and pipes 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7609 00 00 Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7610 10 00 Doors, windows and their frames and thresholds for doors 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7610 90 Other 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7610 90 10 Bridges and bridge-sections, towers and lattice masts 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7610 90 90 Other 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7611 00 00 Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7612 Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7613 00 00 Aluminium containers for compressed or liquefied gas 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7614 Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated 2,030 N/A 2,030 2,233 2,436 2,639 (K) 7616 10 00 Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7616 91 00 Cloth, grill, netting and fencing, of aluminium wire 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7616 99 10 Cast 1,810 N/A 1,810 1,991 2,172 2,353 (K) 7616 99 90 Other 2,490 N/A 2,490 2,739 2,988 3,237 (K) Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066   Canada Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay 0,210 0,030 0,240 0,264 0,288 0,312 (A) 2523 10 00 White clinker 1,280 0,020 1,290 1,419 1,548 1,677 (B) 2523 10 00 Grey clinker – – – _ _ _   2523 21 00 White Portland cement 1,240 0,120 1,360 1,496 1,632 1,768   2523 29 00 Grey Portland cement – – – _ _ _   2523 90 00 White hydraulic cements 1,290 0,130 1,420 1,562 1,704 1,846 (B) 2523 90 00 Grey hydraulic cements – – – _ _ _   2523 30 00 Aluminous cement – – – _ _ _   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 1,510 0,020 1,540 1,555 1,555 1,555   2814 10 00 Anhydrous ammonia 1,910 0,070 1,980 2 2 2   2814 20 00 Ammonia in aqueous solution 0,570 0,020 0,590 0,596 0,596 0,596   2834 21 00 Nitrate of potassium 1,360 0,030 1,400 1,414 1,414 1,414   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,440 0,020 0,460 0,465 0,465 0,465   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,720 0,020 0,740 0,747 0,747 0,747   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,310 0,060 1,370 1,384 1,384 1,384   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,280 0,060 1,340 1,353 1,353 1,353   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,570 0,040 0,610 0,616 0,616 0,616   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 0,980 0,050 1,030 1,040 1,040 1,040   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,040 0,040 1,070 1,081 1,081 1,081   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,600 0,060 1,650 1,667 1,667 1,667   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,390 0,050 1,440 1,454 1,454 1,454   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,390 0,050 1,440 1,454 1,454 1,454   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,360 0,040 2,400 2,424 2,424 2,424   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,340 0,050 1,390 1,404 1,404 1,404   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,130 0,040 1,170 1,182 1,182 1,182   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,250 0,050 1,300 1,313 1,313 1,313   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,590 0,050 0,630 0,636 0,636 0,636   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,700 0,050 0,760 0,768 0,768 0,768   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,480 0,040 0,520 0,525 0,525 0,525   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,450 0,030 0,480 0,485 0,485 0,485   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,290 0,030 0,320 0,323 0,323 0,323   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 0,950 0,070 1,020 1,030 1,030 1,030   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,530 0,070 0,600 0,606 0,606 0,606   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,920 0,040 0,960 0,970 0,970 0,970   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,480 0,030 0,500 0,505 0,505 0,505   Aluminium         10 % mark-up 20 % mark-up 30 % mark-up   7601 Unwrought aluminium 1,960 N/A 1,960 2,156 2,352 2,548 (K) 7603 Aluminium powders and flakes 2,070 N/A 2,070 2,277 2,484 2,691 (K) 7604 10 10 Bars and rods 2,290 N/A 2,290 2,519 2,748 2,977 (K) 7604 10 90 Profiles 2,310 N/A 2,310 2,541 2,772 3,003 (K) 7604 21 00 Hollow profiles 2,310 N/A 2,310 2,541 2,772 3,003 (K) 7604 29 10 Bars and rods 2,290 N/A 2,290 2,519 2,748 2,977 (K) 7604 29 90 Profiles 2,310 N/A 2,310 2,541 2,772 3,003 (K) 7605 Aluminium wire 2,290 N/A 2,290 2,519 2,748 2,977 (K) 7606 Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm 2,750 N/A 2,750 3,025 3,300 3,575 (K) 7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm 2,750 N/A 2,750 3,025 3,300 3,575 (K) 7608 Aluminium tubes and pipes 2,310 N/A 2,310 2,541 2,772 3,003 (K) 7609 00 00 Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) 2,310 N/A 2,310 2,541 2,772 3,003 (K) 7610 10 00 Doors, windows and their frames and thresholds for doors 2,310 N/A 2,310 2,541 2,772 3,003 (K) 7610 90 Other 2,310 N/A 2,310 2,541 2,772 3,003 (K) 7610 90 10 Bridges and bridge-sections, towers and lattice masts 2,310 N/A 2,310 2,541 2,772 3,003 (K) 7610 90 90 Other 2,310 N/A 2,310 2,541 2,772 3,003 (K) 7611 00 00 Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 2,750 N/A 2,750 3,025 3,300 3,575 (K) 7612 Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 2,750 N/A 2,750 3,025 3,300 3,575 (K) 7613 00 00 Aluminium containers for compressed or liquefied gas 2,750 N/A 2,750 3,025 3,300 3,575 (K) 7614 Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated 2,290 N/A 2,290 2,519 2,748 2,977 (K) 7616 10 00 Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles 2,750 N/A 2,750 3,025 3,300 3,575 (K) 7616 91 00 Cloth, grill, netting and fencing, of aluminium wire 2,750 N/A 2,750 3,025 3,300 3,575 (K) 7616 99 10 Cast 2,070 N/A 2,070 2,277 2,484 2,691 (K) 7616 99 90 Other 2,750 N/A 2,750 3,025 3,300 3,575 (K) Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066   Iron and steel         10 % mark-up 20 % mark-up 30 % mark-up   2601 12 00 Agglomerated iron ores and concentrates (excl. roasted iron pyrites) 0,080 0,010 0,090 0,099 0,108 0,117   7201 Pig iron and spiegeleisen, in pigs, blocks or other primary forms 1,110 N/A 1,110 1,221 1,332 1,443   7202 11 Ferro-manganese, containing by weight > 2% of carbon 1,690 N/A 1,690 1,859 2,028 2,197   7202 19 Ferro-manganese, containing by weight <= 2% carbon – N/A – _ _ _   7202 41 Ferro-chromium, containing by weight > 4% of carbon 2,350 N/A 2,350 2,585 2,820 3,055   7202 49 Ferro-chromium, containing by weight <= 4% of carbon – N/A – _ _ _   7202 60 00 Ferro-nickel 3,480 N/A 3,480 3,828 4,176 4,524   7203 Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99,94%, in lumps, pellets or similar forms 0,760 N/A 0,760 0,836 0,912 0,988   7205 Granules and powders of pig iron, spiegeleisen, iron or steel (excl. granules and powders of ferro-alloys, turnings and filings of iron or steel, radioactive iron powders "isotopes" and certain low-calibre, substandard balls for ballbearings) 1,290 N/A 1,290 1,419 1,548 1,677 (C) 7206 Iron and non-alloy steel in ingots or other primary forms (excl. remelting scrap ingots, products obtained by continuous casting and iron of heading 7203) see below see below see below see below see below see below   7206 10 00 Ingots, of iron and non-alloy steel (excl. remelted scrap ingots, continuous cast products, iron of heading 7203) 1,330 N/A 1,330 1,463 1,596 1,729 (C) 7206 90 00 Iron and non-alloy steel, in puddled bars or other primary forms (excl. ingots, remelted scrap ingots, continuous cast products, iron of heading 7203) 1,330 N/A 1,330 1,463 1,596 1,729 (C) 7207 Semi-finished products of iron or non-alloy steel see below see below see below see below see below see below   7207 11 11 Semi-finished products, of non-alloy free-cutting steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting 1,330 N/A 1,330 1,463 1,596 1,729 (C) 7207 11 14 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness of <= 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel) 1,330 N/A 1,330 1,463 1,596 1,729 (C) 7207 11 16 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness of > 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel) 1,330 N/A 1,330 1,463 1,596 1,729 (C) 7207 11 90 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular cross-section, the width < twice the thickness, forged 1,330 N/A 1,330 1,463 1,596 1,729 (C) 7207 12 10 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtained by continuous casting 1,330 N/A 1,330 1,463 1,596 1,729 (C) 7207 12 90 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular "other than square" cross-section, the width >= twice the thickness, forged 1,330 N/A 1,330 1,463 1,596 1,729 (C) 7207 19 12 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting 1,330 N/A 1,330 1,463 1,596 1,729 (C) 7207 19 19 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, forged 1,330 N/A 1,330 1,463 1,596 1,729 (C) 7207 19 80 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon (excl. semi-products, of square, rectangular, circular or polygonal cross-section) 1,330 N/A 1,330 1,463 1,596 1,729 (C) 7207 20 11 Semi-finished products, of non-alloy free-cutting steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting 1,330 N/A 1,330 1,463 1,596 1,729 (C) 7207 20 15 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% but < 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel) 1,330 N/A 1,330 1,463 1,596 1,729 (C) 7207 20 17 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel) 1,330 N/A 1,330 1,463 1,596 1,729 (C) 7207 20 19 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, forged 1,330 N/A 1,330 1,463 1,596 1,729 (C) 7207 20 32 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtained by continuous casting 1,330 N/A 1,330 1,463 1,596 1,729 (C) 7207 20 39 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of rectangular "other than square" cross-section and the width >= twice the thickness, forged 1,330 N/A 1,330 1,463 1,596 1,729 (C) 7207 20 52 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting 1,330 N/A 1,330 1,463 1,596 1,729 (C) 7207 20 59 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of circular or polygonal cross-section, forged 1,330 N/A 1,330 1,463 1,596 1,729 (C) 7207 20 80 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon (excl. those of square, rectangular, circular or polygonal cross-section) 1,330 N/A 1,330 1,463 1,596 1,729 (C) 7208 Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled, not clad, plated or coated 1,430 N/A 1,430 1,573 1,716 1,859 (C) 7209 Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, cold-rolled "cold-reduced", not clad, plated or coated 1,510 N/A 1,510 1,661 1,812 1,963 (C) 7210 Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated 1,510 N/A 1,510 1,661 1,812 1,963 (C) 7211 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", not clad, plated or coated see below see below see below see below see below see below   7211 13 00 Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as "wide flats" 1,430 N/A 1,430 1,573 1,716 1,859 (C) 7211 14 00 Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, not further worked than hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm (excl. "wide flats") 1,430 N/A 1,430 1,573 1,716 1,859 (C) 7211 19 00 Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, simply hot-rolled, not clad, plated or coated, of a thickness < 4,75 mm (excl. "wide flats") 1,430 N/A 1,430 1,573 1,716 1,859 (C) 7211 23 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight < 0,25% of carbon 1,510 N/A 1,510 1,661 1,812 1,963 (C) 7211 29 00 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight >= 0,25% of carbon 1,510 N/A 1,510 1,661 1,812 1,963 (C) 7211 90 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked, but not clad, plated or coated 1,510 N/A 1,510 1,661 1,812 1,963 (C) 7212 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated 1,510 N/A 1,510 1,661 1,812 1,963 (C) 7213 Bars and rods of iron or non-alloy steel, hot-rolled, in irregularly wound coils 1,330 N/A 1,330 1,463 1,596 1,729 (C) 7214 Bars and rods, of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but incl. those twisted after rolling (excl. in irregularly wound coils) see below see below see below see below see below see below   7214 10 00 Bars and rods, of iron or non-alloy steel, not further worked than forged (excl. in irregularly wound coils) 1,330 N/A 1,330 1,463 1,596 1,729 (C) 7214 20 00 Bars and rods, of iron or non-alloy steel, with indentations, ribs, groves or other deformations produced during the rolling process 1,330 N/A 1,330 1,463 1,596 1,729 (C) 7214 30 00 Bars and rods, of non-alloy free-cutting steel, not further worked than hot-rolled, hot-drawn or hot-extruded (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling) 1,330 N/A 1,330 1,463 1,596 1,729 (C) 7214 91 Bars and rods, of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, of rectangular "other than square" cross-section (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process, bars and rods twisted after rolling and free-cutting steel) 1,330 N/A 1,330 1,463 1,596 1,729 (C) 7214 99 Bars and rods, of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded (excl. of rectangular [other than square] cross-section and those containing indentations, ribs, grooves or other deformations produced during the rolling process, and of non-alloy free-cutting steel) 1,330 N/A 1,330 1,463 1,596 1,729 (C) 7215 Bars and rods, of iron or non-alloy steel, cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked, n.e.s. 1,330 N/A 1,330 1,463 1,596 1,729 (C) 7216 Angles, shapes and sections of iron or non-alloy steel, n.e.s. 1,330 N/A 1,330 1,463 1,596 1,729 (C) 7217 Wire of iron or non-alloy steel, in coils (excl. bars and rods) see below see below see below see below see below see below   7217 10 Wire of iron or non-alloy steel, in coils, not plated or coated, whether or not polished (excl. bars and rods) 1,330 N/A 1,330 1,463 1,596 1,729 (C) 7217 20 Wire of iron or non-alloy steel, in coils, plated or coated with zinc (excl. bars and rods) 1,330 N/A 1,330 1,463 1,596 1,729 (C) 7217 30 Wire of iron or non-alloy steel, in coils, plated or coated with base metals (excl. plated or coated with zinc, and bars and rods) 1,330 N/A 1,330 1,463 1,596 1,729 (C) 7217 90 Wire of iron or non-alloy steel, in coils, plated or coated (excl. plated or coated with base metals, and bars and rods) 1,330 N/A 1,330 1,463 1,596 1,729 (C) 7218 Stainless steel in ingots or other primary forms (excl. remelting scrap ingots and products obtained by continuous casting); semi-finished products of stainless steel see below see below see below see below see below see below   7218 10 00 Steel, stainless, in ingots and other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) 3,050 N/A 3,050 3,355 3,660 3,965   7218 91 Semi-finished products of stainless steel, of rectangular "other than square" cross-section 3,210 N/A 3,210 3,531 3,852 4,173   7218 99 11 Semi-finished products of stainless steel, of square cross-section, rolled or obtained by continuous casting 3,210 N/A 3,210 3,531 3,852 4,173   7218 99 19 Semi-finished products of stainless steel, of square cross-section, forged 3,050 N/A 3,050 3,355 3,660 3,965   7218 99 20 Semi-finished products of stainless steel, of circular cross-section or of cross-section other than square or rectangular, rolled or obtained by continuous casting 3,210 N/A 3,210 3,531 3,852 4,173   7218 99 80 Semi-finished products of stainless steel, forged (excl. products of square or rectangular cross-section) 3,050 N/A 3,050 3,355 3,660 3,965   7219 Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7219 11 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of > 10 mm 3,210 N/A 3,210 3,531 3,852 4,173   7219 12 Flat-rolled products of stainless steel, of a width of>= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 4,7 mm and <= 10 mm 3,210 N/A 3,210 3,531 3,852 4,173   7219 13 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 3 mm and < 4,75 mm 3,210 N/A 3,210 3,531 3,852 4,173   7219 14 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of < 3 mm 3,210 N/A 3,210 3,531 3,852 4,173   7219 21 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of > 10 mm 3,210 N/A 3,210 3,531 3,852 4,173   7219 22 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 4,75 mm and <= 10 mm 3,210 N/A 3,210 3,531 3,852 4,173   7219 23 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 3 mm and < 4,75 mm 3,210 N/A 3,210 3,531 3,852 4,173   7219 24 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of < 3 mm 3,210 N/A 3,210 3,531 3,852 4,173   7219 31 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 4,75 mm 3,290 N/A 3,290 3,619 3,948 4,277   7219 32 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 3 mm but < 4,75 mm 3,290 N/A 3,290 3,619 3,948 4,277   7219 33 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of > 1 mm but < 3 mm 3,290 N/A 3,290 3,619 3,948 4,277   7219 34 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 0,5 mm but <= 1 mm 3,290 N/A 3,290 3,619 3,948 4,277   7219 35 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of < 0,5 mm 3,290 N/A 3,290 3,619 3,948 4,277   7219 90 Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked 3,290 N/A 3,290 3,619 3,948 4,277   7220 Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7220 11 00 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of >= 4,75 mm 3,210 N/A 3,210 3,531 3,852 4,173   7220 12 00 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of < 4,75 mm 3,210 N/A 3,210 3,531 3,852 4,173   7220 20 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" 3,290 N/A 3,290 3,619 3,948 4,277   7220 90 Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked 3,290 N/A 3,290 3,619 3,948 4,277   7221 Bars and rods of stainless steel, hot-rolled, in irregularly wound coils 3,050 N/A 3,050 3,355 3,660 3,965   7222 Other bars and rods of stainless steel; angles, shapes and sections of stainless steel, n.e.s. see below see below see below see below see below see below   7222 11 Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only hot-extruded, of circular cross-section 3,050 N/A 3,050 3,355 3,660 3,965   7222 19 Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only extruded (excl. of circular cross-section) 3,050 N/A 3,050 3,355 3,660 3,965   7222 20 Other bars and rods of stainless steel, not further worked than cold-formed or cold-finished 3,050 N/A 3,050 3,355 3,660 3,965   7222 30 Other bars and rods of stainless steel, cold-formed or cold-finished and further worked, or not further worked than forged, or forged, or hot-formed by other means and further worked, n.e.s. 3,050 N/A 3,050 3,355 3,660 3,965   7222 40 Angles, shapes and sections of stainless steel, n.e.s. 3,050 N/A 3,050 3,355 3,660 3,965   7223 Wire of stainless steel, in coils (excl. bars and rods) see below see below see below see below see below see below   7223 00 Wire of stainless steel, in coils (excl. bars and rods) 3,050 N/A 3,050 3,355 3,660 3,965   7224 Steel, alloy, other than stainless, in ingots or other primary forms, semi-finished products of alloy steel other than stainless (excl. waste and scrap in ingot form, and products obtained by continuous casting) see below see below see below see below see below see below   7224 10 Steel, alloy, other than stainless, in ingots or other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) 3,420 N/A 3,420 3,762 4,104 4,446 (F) 7224 90 02 Semi-finished products of tool steel 3,590 N/A 3,590 3,949 4,308 4,667 (F) 7224 90 03 Semi-finished products of high-speed steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting the width measuring < twice the thickness 3,590 N/A 3,590 3,949 4,308 4,667 (F) 7224 90 05 Semi-finished products of steel containing by weight <= 0,7% of carbon, 0,5% to 1,2% of manganese, 0,6% to 2,3% of silicon, or of steel containing by weight >= 0,0008% of boron with any other element < the minimum content referred to in Note 1 f to chapter 72, of square or rectangular cross-section, hot rolled or obtained by continuous casting, the width measuring < twice the thickness 3,590 N/A 3,590 3,949 4,308 4,667 (F) 7224 90 07 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring < twice the thickness (excl. of tool steel, high-speed steel and articles of subheading 7224.90.05) 3,590 N/A 3,590 3,949 4,308 4,667 (F) 7224 90 14 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring >= twice the thickness (excl. of tool steel) 3,590 N/A 3,590 3,949 4,308 4,667 (F) 7224 90 18 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, forged (excl. of tool steel) 3,420 N/A 3,420 3,762 4,104 4,446 (F) 7224 90 31 Semi-finished products of steel containing by weight 0,9% to 1,15% carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting 3,590 N/A 3,590 3,949 4,308 4,667 (F) 7224 90 38 Semi-finished products of alloy steel, other than stainless steel, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting (excl. of tool steel and products containing by weight 0,9% to 1,15% of carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum) 3,590 N/A 3,590 3,949 4,308 4,667 (F) 7224 90 90 Semi-finished products of alloy steel, other than stainless steel, forged (excl. of tool steel and products of square or rectangular, circular or polygamol cross-section) 3,420 N/A 3,420 3,762 4,104 4,446 (F) 7225 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7225 11 00 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, grain-oriented 4,700 N/A 4,700 5,170 5,640 6,110 (C) 7225 19 10 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, hot-rolled 3,590 N/A 3,590 3,949 4,308 4,667 (C) 7225 19 90 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, cold-rolled "cold-reduced", non-grain-oriented 3,660 N/A 3,660 4,026 4,392 4,758 (F) 7225 30 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, in coils (excl. products of silicon-electrical steel) 3,590 N/A 3,590 3,949 4,308 4,667 (F) 7225 40 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, not in coils (excl. products of silicon-electrical steel) 3,590 N/A 3,590 3,949 4,308 4,667 (F) 7225 50 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of silicon-electrical steel) 3,660 N/A 3,660 4,026 4,392 4,758 (F) 7225 91 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and electrolytically plated or coated with zinc (excl. products of silicon-electrical steel) 3,660 N/A 3,660 4,026 4,392 4,758 (F) 7225 92 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and plated or coated with zinc (excl. electrolytically plated or coated and products of silicon-electrical steel) 3,660 N/A 3,660 4,026 4,392 4,758 (F) 7225 99 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. plated or coated with zinc and products of silicon-electrical steel) 3,660 N/A 3,660 4,026 4,392 4,758 (F) 7226 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7226 11 00 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", grain-oriented 4,700 N/A 4,700 5,170 5,640 6,110 (C) 7226 19 10 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, not further worked than hot-rolled 3,590 N/A 3,590 3,949 4,308 4,667 (C) 7226 19 80 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, cold-rolled "cold-reduced", whether or not further worked, or hot-rolled and further worked, non-grain-oriented 3,660 N/A 3,660 4,026 4,392 4,758 (F) 7226 20 00 Flat-rolled products of high-speed steel, of a width of <= 600 mm, hot-rolled or cold-rolled "cold-reduced" 3,590 N/A 3,590 3,949 4,308 4,667 (F) 7226 91 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than hot-rolled (excl. products of high-speed steel or silicon-electrical steel) 3,590 N/A 3,590 3,949 4,308 4,667 (F) 7226 92 00 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of high-speed steel or silicon-electrical steel) 3,660 N/A 3,660 4,026 4,392 4,758 (F) 7226 99 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. products of high-speed steel or silicon-electrical steel) 3,660 N/A 3,660 4,026 4,392 4,758 (F) 7227 Bars and rods of alloy steel other than stainless, hot-rolled, in irregularly wound coils 3,420 N/A 3,420 3,762 4,104 4,446 (C)/(F) 7228 Other bars and rods of alloy steel other than stainless, angles, shapes and sections of alloy steel other than stainless, n.e.s.; hollow drill bars and rods, of alloy or non-alloy steel see below see below see below see below see below see below   7228 10 20 Bars and rods of high-speed steel, not further worked than hot-rolled, hot-drawn or extruded, and hot-rolled, hot-drawn or extruded, not further worked than clad (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,420 N/A 3,420 3,762 4,104 4,446 (F) 7228 10 50 Bars and rods of high-speed steel, forged (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,420 N/A 3,420 3,762 4,104 4,446 (F) 7228 10 90 Bars and rods of high-speed steel, not further worked than cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked (excl. forged products, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,420 N/A 3,420 3,762 4,104 4,446 (F) 7228 20 Bars and rods of silico-manganese steel (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,420 N/A 3,420 3,762 4,104 4,446 (F) 7228 30 Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,420 N/A 3,420 3,762 4,104 4,446 (C)/(F) 7228 40 Bars and rods of alloy steel other than stainless, not further worked than forged (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,420 N/A 3,420 3,762 4,104 4,446 (F) 7228 50 Bars and rods of alloy steel other than stainless, not further worked than cold-formed or cold-finished (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,420 N/A 3,420 3,762 4,104 4,446 (C)/(F) 7228 60 Bars and rods of alloy steel other than stainless, cold-formed or cold-finished and further worked or hot-formed and further worked, n.e.s. (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,420 N/A 3,420 3,762 4,104 4,446 (F) 7228 70 Angles, shapes and sections of alloy steel other than stainless, n.e.s. 3,420 N/A 3,420 3,762 4,104 4,446 (F) 7228 80 00 Hollow drill bars and rods, of alloy or non-alloy steel 3,420 N/A 3,420 3,762 4,104 4,446 (F) 7229 Wire of alloy steel other than stainless, in coils (excl. bars and rods) 3,420 N/A 3,420 3,762 4,104 4,446 (C)/(F) 7301 Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel 1,510 N/A 1,510 1,661 1,812 1,963 (C) 7302 Railway or tramway track construction material of iron or steel, the following : rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers "cross-ties", fish-plates, chairs, chair wedges, sole plates "base plates", rail clips, bedplates, ties and other material specialised for jointing or fixing rails 2,600 N/A 2,600 2,860 3,120 3,380 (C) 7303 Tubes, pipes and hollow profiles, of cast iron see below see below see below see below see below see below   7303 00 Tubes, pipes and hollow profiles, of cast iron 1,590 N/A 1,590 1,749 1,908 2,067   7304 Tubes, pipes and hollow profiles, seamless, of iron or steel (excl. products of cast iron) see below see below see below see below see below see below   7304 11 00 Line pipe of a kind used for oil or gas pipelines, seamless, of stainless steel 3,050 N/A 3,050 3,355 3,660 3,965   7304 19 Line pipe of a kind used for oil or gas pipelines, seamless, of iron or steel (excl. products of stainless steel or of cast iron) 1,340 N/A 1,340 1,474 1,608 1,742 (C) 7304 22 00 Drill pipe, seamless, of stainless steel, of a kind used in drilling for oil or gas 3,050 N/A 3,050 3,355 3,660 3,965   7304 23 00 Drill pipe, seamless, of a kind used in drilling for oil or gas, of iron or steel (excl. products of stainless steel or of cast iron) 1,340 N/A 1,340 1,474 1,608 1,742 (C) 7304 24 00 Casing and tubing, seamless, of a kind used for drilling for oil or gas, of stainless steel 3,050 N/A 3,050 3,355 3,660 3,965   7304 29 Casing and tubing, seamless, of iron or steel, of a kind used in drilling for oil or gas (excl. products of cast iron) 1,340 N/A 1,340 1,474 1,608 1,742 (C) 7304 31 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" (excl. cast iron products and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used for drilling for oil or gas) 1,340 N/A 1,340 1,474 1,608 1,742 (C) 7304 39 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, not cold-drawn or cold-rolled "cold-reduced" (excl. cast iron products, line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas) 1,340 N/A 1,340 1,474 1,608 1,742 (C) 7304 41 00 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas) 3,050 N/A 3,050 3,355 3,660 3,965   7304 49 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines or of a kind used for drilling for oil or gas) 3,050 N/A 3,050 3,355 3,660 3,965   7304 51 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil) 1,340 N/A 1,340 1,474 1,608 1,742 (F) 7304 59 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil) 1,340 N/A 1,340 1,474 1,608 1,742 (C)/(F) 7304 90 00 Tubes, pipes and hollow profiles, seamless, of non-circular cross-section, of iron or steel (excl. products of cast iron) 1,340 N/A 1,340 1,474 1,608 1,742 (C) 7305 Tubes and pipes, having circular cross-sections and an external diameter of > 406,4 mm, of flat-rolled products of iron or steel "e.g., welded, riveted or similarly closed" 1,510 N/A 1,510 1,661 1,812 1,963 (C) 7306 Tubes, pipes and hollow profiles "e.g., open seam or welded, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless tubes and pipes and tubes having internal and external circular cross-sections and an external diameter of > 406,4 mm) see below see below see below see below see below see below   7306 11 00 Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm 3,290 N/A 3,290 3,619 3,948 4,277   7306 19 00 Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron) 1,510 N/A 1,510 1,661 1,812 1,963 (C) 7306 21 00 Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm 3,290 N/A 3,290 3,619 3,948 4,277   7306 29 00 Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron) 1,510 N/A 1,510 1,661 1,812 1,963 (C) 7306 30 12 Precision tubes, welded, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" 1,510 N/A 1,510 1,661 1,812 1,963 (C) 7306 30 18 Precision tubes, welded, of circular cross-section, of iron or non-alloy steel (excl. cold-drawn or cold-rolled) 1,440 N/A 1,440 1,584 1,728 1,872   7306 30 41 Threaded or threadable tubes "gas pipe", welded, of circular cross-section, of iron or non-alloy steel, plated or coated with zinc 1,510 N/A 1,510 1,661 1,812 1,963 (C) 7306 30 49 Threaded or threadable tubes "gas pipe", welded, of circular cross-section, of iron or non-alloy steel (excl. products plated or coated with zinc) 1,510 N/A 1,510 1,661 1,812 1,963 (C) 7306 30 72 Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel, of an external diameter of <= 168,3 mm, plated or coated with zinc (excl. line pipe of a kind used for oil or gas pipelines or casing and tubingof a kind used in drilling for oil or gas) 1,510 N/A 1,510 1,661 1,812 1,963 (C) 7306 30 77 Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel of an external diameter of <= 168,3 mm (excl. plated or coated with zinc and line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used in drilling for oil or gas, precision tubes and threaded or threadable tubes "gas pipe") 1,510 N/A 1,510 1,661 1,812 1,963 (C) 7306 30 80 Tubes, pipes and hollow profiles, welded, having a circular cross-section, of iron or steel, of an external diameter of > 168,3 mm but <= 406,4 mm (excl. line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, or precision steel tubes, electrical conduit tubes or threaded or threadable tubes "gas pipe") 1,510 N/A 1,510 1,661 1,812 1,963 (C) 7306 40 20 Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. products having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) 3,290 N/A 3,290 3,619 3,948 4,277   7306 40 80 Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel (excl. products cold-drawn or cold-rolled "cold-reduced", tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) 3,210 N/A 3,210 3,531 3,852 4,173   7306 50 21 Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" 1,580 N/A 1,580 1,738 1,896 2,054 (F) 7306 50 29 Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless (excl. cold-drawn or cold-rolled) 1,510 N/A 1,510 1,661 1,812 1,963 (F) 7306 50 80 Tubes, pipes and hollow profiles, welded, of circular cross-section, of alloy steel other than stainless (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and precision steel tubes) 1,580 N/A 1,580 1,738 1,896 2,054 (F) 7306 61 10 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel 3,290 N/A 3,290 3,619 3,948 4,277   7306 61 92 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of <= 2 mm 1,510 N/A 1,510 1,661 1,812 1,963 (C) 7306 61 99 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of > 2 mm 1,510 N/A 1,510 1,661 1,812 1,963 (C) 7306 69 10 Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) 3,290 N/A 3,290 3,619 3,948 4,277   7306 69 90 Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of iron or steel other than stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) 1,510 N/A 1,510 1,661 1,812 1,963 (C) 7306 90 00 Tubes, pipes and hollow profiles "e.g., open seam, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless or welded tubes and pipes and tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm) 1,510 N/A 1,510 1,661 1,812 1,963 (C) 7307 Tube or pipe fittings "e.g. couplings, elbows, sleeves", of iron or steel see below see below see below see below see below see below   7307 11 Tube or pipe fittings of non-malleable cast iron 1,110 N/A 1,110 1,221 1,332 1,443   7307 19 10 Tube or pipe fittings of cast iron (excl. of non-malleable) 1,110 N/A 1,110 1,221 1,332 1,443   7307 19 90 Cast tube or pipe fittings of steel 1,330 N/A 1,330 1,463 1,596 1,729 (C) 7307 21 00 Flanges of stainless steel (excl. cast products) 2,660 N/A 2,660 2,926 3,192 3,458   7307 22 Threaded elbows, bends and sleeves of stainless steel (excl. cast products) 2,660 N/A 2,660 2,926 3,192 3,458   7307 23 Butt welding tube or pipe fittings of stainless steel (excl. cast products) 2,660 N/A 2,660 2,926 3,192 3,458   7307 29 Tube or pipe fittings of stainless steel (excl. cast products, flanges, threaded elbows, bends and sleeves and butt weldings fittings) 2,660 N/A 2,660 2,926 3,192 3,458   7307 91 00 Flanges of iron or steel (excl. cast or stainless products) 1,330 N/A 1,330 1,463 1,596 1,729 (C) 7307 92 Threaded elbows, bends and sleeves, of stainless steel (excl. cast or stainless products) 1,330 N/A 1,330 1,463 1,596 1,729 (C) 7307 93 Butt welding fittings of iron or steel (excl. cast iron or stainless steel products, and flanges) 1,330 N/A 1,330 1,463 1,596 1,729 (C) 7307 99 Tube or pipe fittings, of iron or steel (excl. cast iron or stainless steel products; flanges; threaded elbows, bends and sleeves; butt welding fittings) 1,330 N/A 1,330 1,463 1,596 1,729 (C) 7308 Structures and parts of structures "e.g., bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns", of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel (excl. prefabricated buildings of heading 9406) 2,910 N/A 2,910 3,201 3,492 3,783 (C) 7309 Reservoirs, tanks, vats and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of > 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated (excl. containers specifically constructed or equipped for one or more types of transport) 3,180 N/A 3,180 3,498 3,816 4,134 (C) 7310 Tanks, casks, drums, cans, boxes and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of <= 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated, n.e.s. 1,520 N/A 1,520 1,672 1,824 1,976 (C) 7311 Containers of iron or steel, for compressed or liquefied gas (excl. containers specifically constructed or equipped for one or more types of transport) see below see below see below see below see below see below   7311 00 Containers of iron or steel, for compressed or liquefied gas (excl. containers specifically constructed or equipped for one or more types of transport) 3,010 N/A 3,010 3,311 3,612 3,913 (C) 7318 Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers, incl. spring washers, and similar articles, of iron or steel (excl. lag screws, stoppers, plugs and the like, threaded) see below see below see below see below see below see below   7318 11 00 Coach screws of iron or steel 1,330 N/A 1,330 1,463 1,596 1,729 (C) 7318 12 10 Wood screws of stainless steel (excl. coach screws) 3,050 N/A 3,050 3,355 3,660 3,965 (C) 7318 12 90 Wood screws of iron or steel other than stainless (excl. coach screws) 1,330 N/A 1,330 1,463 1,596 1,729 (C) 7318 13 00 Screw hooks and screw rings, of iron or steel 1,330 N/A 1,330 1,463 1,596 1,729 (C) 7318 14 10 Self-tapping screws, of stainless steel (excl. wood screws) 3,050 N/A 3,050 3,355 3,660 3,965 (C) 7318 14 91 Spaced-thread screws of iron or steel other than stainless 1,330 N/A 1,330 1,463 1,596 1,729 (C) 7318 14 99 Self-tapping screws of iron or steel other than stainless (excl. spaced-thread screws and wood screws) 1,330 N/A 1,330 1,463 1,596 1,729 (C) 7318 15 Threaded screws and bolts, of iron or steel, whether or not with their nuts and washers (excl. coach screws and other wood screws, screw hooks and screw rings, self-tapping screws, lag screws, stoppers, plugs and the like, threaded) 2,480 N/A 2,480 2,728 2,976 3,224 (C) 7318 16 Nuts of iron or steel 2,910 N/A 2,910 3,201 3,492 3,783 (C) 7318 19 00 Threaded articles, of iron or steel, n.e.s. 1,330 N/A 1,330 1,463 1,596 1,729 (C) 7318 21 00 Spring washers and other lock washers, of iron or steel 1,330 N/A 1,330 1,463 1,596 1,729 (C) 7318 22 00 Washers of iron or steel (excl. spring washers and other lock washers) 1,740 N/A 1,740 1,914 2,088 2,262 (C) 7318 23 00 Rivets of iron or steel (excl. tubular and bifurcated rivets for particular uses) 1,610 N/A 1,610 1,771 1,932 2,093 (C) 7318 24 00 Cotters and cotter pins, of iron or steel 1,330 N/A 1,330 1,463 1,596 1,729 (C) 7318 29 00 Non-threaded articles, of iron or steel 1,330 N/A 1,330 1,463 1,596 1,729 (C) 7326 Articles of iron or steel, n.e.s. (excl. cast articles) see below see below see below see below see below see below   7326 11 00 Grinding balls and similar articles for mills, of iron or steel, forged or stamped, but not further worked 1,330 N/A 1,330 1,463 1,596 1,729 (C) 7326 19 Articles of iron or steel, forged or stamped, but not further worked, n.e.s. (excl. grinding balls and similar articles for mills) 1,330 N/A 1,330 1,463 1,596 1,729 (C) 7326 20 00 Articles of iron or steel wire, n.e.s. 1,330 N/A 1,330 1,463 1,596 1,729 (C) 7326 90 30 Ladders and steps, of iron or steel 1,330 N/A 1,330 1,463 1,596 1,729 (C) 7326 90 40 Pallets and similar platforms for handling goods, of iron or steel 1,330 N/A 1,330 1,463 1,596 1,729 (C) 7326 90 50 Reels for cables, piping and the like, of iron or steel 1,330 N/A 1,330 1,463 1,596 1,729 (C) 7326 90 60 Ventilators, non-mechanical, guttering, hooks and like articles used in the building industry, n.e.s., of iron or steel 1,330 N/A 1,330 1,463 1,596 1,729 (C) 7326 90 92 Articles of iron or steel, open-die forged, n.e.s. 1,330 N/A 1,330 1,463 1,596 1,729 (C) 7326 90 94 Articles of iron or steel, closed-die forged, n.e.s. 1,330 N/A 1,330 1,463 1,596 1,729 (C) 7326 90 96 Sintered articles of iron or steel, n.e.s. 1,330 N/A 1,330 1,463 1,596 1,729 (C) 7326 90 98 Articles of iron or steel, n.e.s. 1,510 N/A 1,510 1,661 1,812 1,963 (C) Chile Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – _ _ _   2523 10 00 White clinker – – – _ _ _   2523 10 00 Grey clinker 0,870 0,050 0,920 1,012 1,104 1,196 (A) 2523 21 00 White Portland cement – – – _ _ _   2523 29 00 Grey Portland cement 0,940 0,070 1,010 1,111 1,212 1,313   2523 90 00 White hydraulic cements – – – _ _ _   2523 90 00 Grey hydraulic cements 0,900 0,070 0,970 1,067 1,164 1,261 (A) 2523 30 00 Aluminous cement – – – _ _ _   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 1,850 0,060 1,900 1,919 1,919 1,919   2814 10 00 Anhydrous ammonia – – – _ _ _   2814 20 00 Ammonia in aqueous solution 0,680 0,050 0,730 0,737 0,737 0,737   2834 21 00 Nitrate of potassium 1,640 0,080 1,730 1,747 1,747 1,747   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,510 0,040 0,550 0,556 0,556 0,556   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,840 0,040 0,880 0,889 0,889 0,889   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,530 0,140 1,660 1,677 1,677 1,677   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,500 0,130 1,630 1,646 1,646 1,646   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,660 0,100 0,760 0,768 0,768 0,768   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,170 0,110 1,280 1,293 1,293 1,293   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,250 0,090 1,340 1,353 1,353 1,353   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,920 0,130 2,060 2,081 2,081 2,081   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,660 0,120 1,780 1,798 1,798 1,798   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,660 0,120 1,780 1,798 1,798 1,798   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,880 0,090 2,970 3 3 3   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,610 0,120 1,730 1,747 1,747 1,747   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,340 0,100 1,450 1,465 1,465 1,465   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,480 0,120 1,600 1,616 1,616 1,616   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,700 0,100 0,800 0,808 0,808 0,808   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,840 0,120 0,960 0,970 0,970 0,970   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,570 0,090 0,660 0,667 0,667 0,667   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,530 0,070 0,600 0,606 0,606 0,606   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,340 0,060 0,400 0,404 0,404 0,404   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,140 0,150 1,290 1,303 1,303 1,303   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,610 0,120 0,730 0,737 0,737 0,737   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,100 0,090 1,200 1,212 1,212 1,212   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,570 0,060 0,630 0,636 0,636 0,636   Aluminium         10 % mark-up 20 % mark-up 30 % mark-up   7601 Unwrought aluminium 0,360 N/A 0,360 0,396 0,432 0,468 (L) 7603 Aluminium powders and flakes 0,470 N/A 0,470 0,517 0,564 0,611 (L) 7604 10 10 Bars and rods 0,700 N/A 0,700 0,770 0,840 0,910 (L) 7604 10 90 Profiles 0,710 N/A 0,710 0,781 0,852 0,923 (L) 7604 21 00 Hollow profiles 0,710 N/A 0,710 0,781 0,852 0,923 (L) 7604 29 10 Bars and rods 0,700 N/A 0,700 0,770 0,840 0,910 (L) 7604 29 90 Profiles 0,710 N/A 0,710 0,781 0,852 0,923 (L) 7605 Aluminium wire 0,700 N/A 0,700 0,770 0,840 0,910 (L) 7606 Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm 1,150 N/A 1,150 1,265 1,380 1,495 (L) 7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm 1,150 N/A 1,150 1,265 1,380 1,495 (L) 7608 Aluminium tubes and pipes 0,710 N/A 0,710 0,781 0,852 0,923 (L) 7609 00 00 Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) 0,710 N/A 0,710 0,781 0,852 0,923 (L) 7610 10 00 Doors, windows and their frames and thresholds for doors 0,710 N/A 0,710 0,781 0,852 0,923 (L) 7610 90 Other 0,710 N/A 0,710 0,781 0,852 0,923 (L) 7610 90 10 Bridges and bridge-sections, towers and lattice masts 0,710 N/A 0,710 0,781 0,852 0,923 (L) 7610 90 90 Other 0,710 N/A 0,710 0,781 0,852 0,923 (L) 7611 00 00 Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 1,150 N/A 1,150 1,265 1,380 1,495 (L) 7612 Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 1,150 N/A 1,150 1,265 1,380 1,495 (L) 7613 00 00 Aluminium containers for compressed or liquefied gas 1,150 N/A 1,150 1,265 1,380 1,495 (L) 7614 Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated 0,700 N/A 0,700 0,770 0,840 0,910 (L) 7616 10 00 Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles 1,150 N/A 1,150 1,265 1,380 1,495 (L) 7616 91 00 Cloth, grill, netting and fencing, of aluminium wire 1,150 N/A 1,150 1,265 1,380 1,495 (L) 7616 99 10 Cast 0,470 N/A 0,470 0,517 0,564 0,611 (L) 7616 99 90 Other 1,150 N/A 1,150 1,265 1,380 1,495 (L) Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066   Iron and steel         10 % mark-up 20 % mark-up 30 % mark-up   2601 12 00 Agglomerated iron ores and concentrates (excl. roasted iron pyrites) 0,060 0,030 0,100 0,110 0,120 0,130   7201 Pig iron and spiegeleisen, in pigs, blocks or other primary forms 1,960 N/A 1,960 2,156 2,352 2,548   7202 11 Ferro-manganese, containing by weight > 2% of carbon 1,690 N/A 1,690 1,859 2,028 2,197   7202 19 Ferro-manganese, containing by weight <= 2% carbon – N/A – _ _ _   7202 41 Ferro-chromium, containing by weight > 4% of carbon 2,350 N/A 2,350 2,585 2,820 3,055   7202 49 Ferro-chromium, containing by weight <= 4% of carbon – N/A – _ _ _   7202 60 00 Ferro-nickel – N/A – _ _ _   7203 Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99,94%, in lumps, pellets or similar forms – N/A – _ _ _   7205 Granules and powders of pig iron, spiegeleisen, iron or steel (excl. granules and powders of ferro-alloys, turnings and filings of iron or steel, radioactive iron powders "isotopes" and certain low-calibre, substandard balls for ballbearings) 1,970 N/A 1,970 2,167 2,364 2,561 (C) 7206 Iron and non-alloy steel in ingots or other primary forms (excl. remelting scrap ingots, products obtained by continuous casting and iron of heading 7203) see below see below see below see below see below see below   7206 10 00 Ingots, of iron and non-alloy steel (excl. remelted scrap ingots, continuous cast products, iron of heading 7203) 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7206 90 00 Iron and non-alloy steel, in puddled bars or other primary forms (excl. ingots, remelted scrap ingots, continuous cast products, iron of heading 7203) 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7207 Semi-finished products of iron or non-alloy steel see below see below see below see below see below see below   7207 11 11 Semi-finished products, of non-alloy free-cutting steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7207 11 14 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness of <= 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel) 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7207 11 16 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness of > 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel) 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7207 11 90 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular cross-section, the width < twice the thickness, forged 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7207 12 10 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtained by continuous casting 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7207 12 90 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular "other than square" cross-section, the width >= twice the thickness, forged 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7207 19 12 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7207 19 19 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, forged 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7207 19 80 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon (excl. semi-products, of square, rectangular, circular or polygonal cross-section) 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7207 20 11 Semi-finished products, of non-alloy free-cutting steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7207 20 15 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% but < 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel) 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7207 20 17 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel) 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7207 20 19 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, forged 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7207 20 32 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtained by continuous casting 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7207 20 39 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of rectangular "other than square" cross-section and the width >= twice the thickness, forged 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7207 20 52 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7207 20 59 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of circular or polygonal cross-section, forged 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7207 20 80 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon (excl. those of square, rectangular, circular or polygonal cross-section) 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7208 Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled, not clad, plated or coated 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7209 Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, cold-rolled "cold-reduced", not clad, plated or coated 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7210 Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7211 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", not clad, plated or coated see below see below see below see below see below see below   7211 13 00 Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as "wide flats" 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7211 14 00 Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, not further worked than hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm (excl. "wide flats") 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7211 19 00 Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, simply hot-rolled, not clad, plated or coated, of a thickness < 4,75 mm (excl. "wide flats") 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7211 23 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight < 0,25% of carbon 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7211 29 00 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight >= 0,25% of carbon 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7211 90 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked, but not clad, plated or coated 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7212 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7213 Bars and rods of iron or non-alloy steel, hot-rolled, in irregularly wound coils 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7214 Bars and rods, of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but incl. those twisted after rolling (excl. in irregularly wound coils) see below see below see below see below see below see below   7214 10 00 Bars and rods, of iron or non-alloy steel, not further worked than forged (excl. in irregularly wound coils) 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7214 20 00 Bars and rods, of iron or non-alloy steel, with indentations, ribs, groves or other deformations produced during the rolling process 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7214 30 00 Bars and rods, of non-alloy free-cutting steel, not further worked than hot-rolled, hot-drawn or hot-extruded (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling) 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7214 91 Bars and rods, of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, of rectangular "other than square" cross-section (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process, bars and rods twisted after rolling and free-cutting steel) 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7214 99 Bars and rods, of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded (excl. of rectangular [other than square] cross-section and those containing indentations, ribs, grooves or other deformations produced during the rolling process, and of non-alloy free-cutting steel) 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7215 Bars and rods, of iron or non-alloy steel, cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked, n.e.s. 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7216 Angles, shapes and sections of iron or non-alloy steel, n.e.s. 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7217 Wire of iron or non-alloy steel, in coils (excl. bars and rods) see below see below see below see below see below see below   7217 10 Wire of iron or non-alloy steel, in coils, not plated or coated, whether or not polished (excl. bars and rods) 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7217 20 Wire of iron or non-alloy steel, in coils, plated or coated with zinc (excl. bars and rods) 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7217 30 Wire of iron or non-alloy steel, in coils, plated or coated with base metals (excl. plated or coated with zinc, and bars and rods) 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7217 90 Wire of iron or non-alloy steel, in coils, plated or coated (excl. plated or coated with base metals, and bars and rods) 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7218 Stainless steel in ingots or other primary forms (excl. remelting scrap ingots and products obtained by continuous casting); semi-finished products of stainless steel see below see below see below see below see below see below   7218 10 00 Steel, stainless, in ingots and other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) 2,950 N/A 2,950 3,245 3,540 3,835   7218 91 Semi-finished products of stainless steel, of rectangular "other than square" cross-section 2,950 N/A 2,950 3,245 3,540 3,835   7218 99 11 Semi-finished products of stainless steel, of square cross-section, rolled or obtained by continuous casting 2,950 N/A 2,950 3,245 3,540 3,835   7218 99 19 Semi-finished products of stainless steel, of square cross-section, forged 2,950 N/A 2,950 3,245 3,540 3,835   7218 99 20 Semi-finished products of stainless steel, of circular cross-section or of cross-section other than square or rectangular, rolled or obtained by continuous casting 2,950 N/A 2,950 3,245 3,540 3,835   7218 99 80 Semi-finished products of stainless steel, forged (excl. products of square or rectangular cross-section) 2,950 N/A 2,950 3,245 3,540 3,835   7219 Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7219 11 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of > 10 mm 2,950 N/A 2,950 3,245 3,540 3,835   7219 12 Flat-rolled products of stainless steel, of a width of>= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 4,7 mm and <= 10 mm 2,950 N/A 2,950 3,245 3,540 3,835   7219 13 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 3 mm and < 4,75 mm 2,950 N/A 2,950 3,245 3,540 3,835   7219 14 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of < 3 mm 2,950 N/A 2,950 3,245 3,540 3,835   7219 21 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of > 10 mm 2,950 N/A 2,950 3,245 3,540 3,835   7219 22 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 4,75 mm and <= 10 mm 2,950 N/A 2,950 3,245 3,540 3,835   7219 23 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 3 mm and < 4,75 mm 2,950 N/A 2,950 3,245 3,540 3,835   7219 24 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of < 3 mm 2,950 N/A 2,950 3,245 3,540 3,835   7219 31 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 4,75 mm 2,950 N/A 2,950 3,245 3,540 3,835   7219 32 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 3 mm but < 4,75 mm 2,950 N/A 2,950 3,245 3,540 3,835   7219 33 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of > 1 mm but < 3 mm 2,950 N/A 2,950 3,245 3,540 3,835   7219 34 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 0,5 mm but <= 1 mm 2,950 N/A 2,950 3,245 3,540 3,835   7219 35 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of < 0,5 mm 2,950 N/A 2,950 3,245 3,540 3,835   7219 90 Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked 2,950 N/A 2,950 3,245 3,540 3,835   7220 Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7220 11 00 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of >= 4,75 mm 2,950 N/A 2,950 3,245 3,540 3,835   7220 12 00 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of < 4,75 mm 2,950 N/A 2,950 3,245 3,540 3,835   7220 20 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" 2,950 N/A 2,950 3,245 3,540 3,835   7220 90 Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked 2,950 N/A 2,950 3,245 3,540 3,835   7221 Bars and rods of stainless steel, hot-rolled, in irregularly wound coils 2,950 N/A 2,950 3,245 3,540 3,835   7222 Other bars and rods of stainless steel; angles, shapes and sections of stainless steel, n.e.s. see below see below see below see below see below see below   7222 11 Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only hot-extruded, of circular cross-section 2,950 N/A 2,950 3,245 3,540 3,835   7222 19 Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only extruded (excl. of circular cross-section) 2,950 N/A 2,950 3,245 3,540 3,835   7222 20 Other bars and rods of stainless steel, not further worked than cold-formed or cold-finished 2,950 N/A 2,950 3,245 3,540 3,835   7222 30 Other bars and rods of stainless steel, cold-formed or cold-finished and further worked, or not further worked than forged, or forged, or hot-formed by other means and further worked, n.e.s. 2,950 N/A 2,950 3,245 3,540 3,835   7222 40 Angles, shapes and sections of stainless steel, n.e.s. 2,950 N/A 2,950 3,245 3,540 3,835   7223 Wire of stainless steel, in coils (excl. bars and rods) see below see below see below see below see below see below   7223 00 Wire of stainless steel, in coils (excl. bars and rods) 2,950 N/A 2,950 3,245 3,540 3,835   7224 Steel, alloy, other than stainless, in ingots or other primary forms, semi-finished products of alloy steel other than stainless (excl. waste and scrap in ingot form, and products obtained by continuous casting) see below see below see below see below see below see below   7224 10 Steel, alloy, other than stainless, in ingots or other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) 2,850 N/A 2,850 3,135 3,420 3,705 (F) 7224 90 02 Semi-finished products of tool steel 2,850 N/A 2,850 3,135 3,420 3,705 (F) 7224 90 03 Semi-finished products of high-speed steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting the width measuring < twice the thickness 2,850 N/A 2,850 3,135 3,420 3,705 (F) 7224 90 05 Semi-finished products of steel containing by weight <= 0,7% of carbon, 0,5% to 1,2% of manganese, 0,6% to 2,3% of silicon, or of steel containing by weight >= 0,0008% of boron with any other element < the minimum content referred to in Note 1 f to chapter 72, of square or rectangular cross-section, hot rolled or obtained by continuous casting, the width measuring < twice the thickness 2,850 N/A 2,850 3,135 3,420 3,705 (F) 7224 90 07 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring < twice the thickness (excl. of tool steel, high-speed steel and articles of subheading 7224.90.05) 2,850 N/A 2,850 3,135 3,420 3,705 (F) 7224 90 14 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring >= twice the thickness (excl. of tool steel) 2,850 N/A 2,850 3,135 3,420 3,705 (F) 7224 90 18 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, forged (excl. of tool steel) 2,850 N/A 2,850 3,135 3,420 3,705 (F) 7224 90 31 Semi-finished products of steel containing by weight 0,9% to 1,15% carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting 2,850 N/A 2,850 3,135 3,420 3,705 (F) 7224 90 38 Semi-finished products of alloy steel, other than stainless steel, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting (excl. of tool steel and products containing by weight 0,9% to 1,15% of carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum) 2,850 N/A 2,850 3,135 3,420 3,705 (F) 7224 90 90 Semi-finished products of alloy steel, other than stainless steel, forged (excl. of tool steel and products of square or rectangular, circular or polygamol cross-section) 2,850 N/A 2,850 3,135 3,420 3,705 (F) 7225 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7225 11 00 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, grain-oriented 3,780 N/A 3,780 4,158 4,536 4,914 (C) 7225 19 10 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, hot-rolled 2,850 N/A 2,850 3,135 3,420 3,705 (C) 7225 19 90 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, cold-rolled "cold-reduced", non-grain-oriented 2,850 N/A 2,850 3,135 3,420 3,705 (F) 7225 30 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, in coils (excl. products of silicon-electrical steel) 2,850 N/A 2,850 3,135 3,420 3,705 (F) 7225 40 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, not in coils (excl. products of silicon-electrical steel) 2,850 N/A 2,850 3,135 3,420 3,705 (F) 7225 50 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of silicon-electrical steel) 2,850 N/A 2,850 3,135 3,420 3,705 (F) 7225 91 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and electrolytically plated or coated with zinc (excl. products of silicon-electrical steel) 2,850 N/A 2,850 3,135 3,420 3,705 (F) 7225 92 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and plated or coated with zinc (excl. electrolytically plated or coated and products of silicon-electrical steel) 2,850 N/A 2,850 3,135 3,420 3,705 (F) 7225 99 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. plated or coated with zinc and products of silicon-electrical steel) 2,850 N/A 2,850 3,135 3,420 3,705 (F) 7226 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7226 11 00 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", grain-oriented 3,780 N/A 3,780 4,158 4,536 4,914 (C) 7226 19 10 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, not further worked than hot-rolled 2,850 N/A 2,850 3,135 3,420 3,705 (C) 7226 19 80 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, cold-rolled "cold-reduced", whether or not further worked, or hot-rolled and further worked, non-grain-oriented 2,850 N/A 2,850 3,135 3,420 3,705 (F) 7226 20 00 Flat-rolled products of high-speed steel, of a width of <= 600 mm, hot-rolled or cold-rolled "cold-reduced" 2,850 N/A 2,850 3,135 3,420 3,705 (F) 7226 91 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than hot-rolled (excl. products of high-speed steel or silicon-electrical steel) 2,850 N/A 2,850 3,135 3,420 3,705 (F) 7226 92 00 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of high-speed steel or silicon-electrical steel) 2,850 N/A 2,850 3,135 3,420 3,705 (F) 7226 99 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. products of high-speed steel or silicon-electrical steel) 2,850 N/A 2,850 3,135 3,420 3,705 (F) 7227 Bars and rods of alloy steel other than stainless, hot-rolled, in irregularly wound coils 2,850 N/A 2,850 3,135 3,420 3,705 (C)/(F) 7228 Other bars and rods of alloy steel other than stainless, angles, shapes and sections of alloy steel other than stainless, n.e.s.; hollow drill bars and rods, of alloy or non-alloy steel see below see below see below see below see below see below   7228 10 20 Bars and rods of high-speed steel, not further worked than hot-rolled, hot-drawn or extruded, and hot-rolled, hot-drawn or extruded, not further worked than clad (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 2,850 N/A 2,850 3,135 3,420 3,705 (F) 7228 10 50 Bars and rods of high-speed steel, forged (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 2,850 N/A 2,850 3,135 3,420 3,705 (F) 7228 10 90 Bars and rods of high-speed steel, not further worked than cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked (excl. forged products, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 2,850 N/A 2,850 3,135 3,420 3,705 (F) 7228 20 Bars and rods of silico-manganese steel (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 2,850 N/A 2,850 3,135 3,420 3,705 (F) 7228 30 Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 2,850 N/A 2,850 3,135 3,420 3,705 (C)/(F) 7228 40 Bars and rods of alloy steel other than stainless, not further worked than forged (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 2,850 N/A 2,850 3,135 3,420 3,705 (F) 7228 50 Bars and rods of alloy steel other than stainless, not further worked than cold-formed or cold-finished (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 2,850 N/A 2,850 3,135 3,420 3,705 (C)/(F) 7228 60 Bars and rods of alloy steel other than stainless, cold-formed or cold-finished and further worked or hot-formed and further worked, n.e.s. (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 2,850 N/A 2,850 3,135 3,420 3,705 (F) 7228 70 Angles, shapes and sections of alloy steel other than stainless, n.e.s. 2,850 N/A 2,850 3,135 3,420 3,705 (F) 7228 80 00 Hollow drill bars and rods, of alloy or non-alloy steel 2,850 N/A 2,850 3,135 3,420 3,705 (F) 7229 Wire of alloy steel other than stainless, in coils (excl. bars and rods) 2,850 N/A 2,850 3,135 3,420 3,705 (C)/(F) 7301 Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7302 Railway or tramway track construction material of iron or steel, the following : rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers "cross-ties", fish-plates, chairs, chair wedges, sole plates "base plates", rail clips, bedplates, ties and other material specialised for jointing or fixing rails 2,680 N/A 2,680 2,948 3,216 3,484 (C) 7303 Tubes, pipes and hollow profiles, of cast iron see below see below see below see below see below see below   7303 00 Tubes, pipes and hollow profiles, of cast iron 1,960 N/A 1,960 2,156 2,352 2,548   7304 Tubes, pipes and hollow profiles, seamless, of iron or steel (excl. products of cast iron) see below see below see below see below see below see below   7304 11 00 Line pipe of a kind used for oil or gas pipelines, seamless, of stainless steel 2,950 N/A 2,950 3,245 3,540 3,835   7304 19 Line pipe of a kind used for oil or gas pipelines, seamless, of iron or steel (excl. products of stainless steel or of cast iron) 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7304 22 00 Drill pipe, seamless, of stainless steel, of a kind used in drilling for oil or gas 2,950 N/A 2,950 3,245 3,540 3,835   7304 23 00 Drill pipe, seamless, of a kind used in drilling for oil or gas, of iron or steel (excl. products of stainless steel or of cast iron) 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7304 24 00 Casing and tubing, seamless, of a kind used for drilling for oil or gas, of stainless steel 2,950 N/A 2,950 3,245 3,540 3,835   7304 29 Casing and tubing, seamless, of iron or steel, of a kind used in drilling for oil or gas (excl. products of cast iron) 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7304 31 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" (excl. cast iron products and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used for drilling for oil or gas) 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7304 39 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, not cold-drawn or cold-rolled "cold-reduced" (excl. cast iron products, line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas) 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7304 41 00 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas) 2,950 N/A 2,950 3,245 3,540 3,835   7304 49 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines or of a kind used for drilling for oil or gas) 2,950 N/A 2,950 3,245 3,540 3,835   7304 51 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil) 1,990 N/A 1,990 2,189 2,388 2,587 (F) 7304 59 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil) 1,990 N/A 1,990 2,189 2,388 2,587 (C)/(F) 7304 90 00 Tubes, pipes and hollow profiles, seamless, of non-circular cross-section, of iron or steel (excl. products of cast iron) 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7305 Tubes and pipes, having circular cross-sections and an external diameter of > 406,4 mm, of flat-rolled products of iron or steel "e.g., welded, riveted or similarly closed" 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7306 Tubes, pipes and hollow profiles "e.g., open seam or welded, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless tubes and pipes and tubes having internal and external circular cross-sections and an external diameter of > 406,4 mm) see below see below see below see below see below see below   7306 11 00 Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm 2,950 N/A 2,950 _ 3,540 3,835   7306 19 00 Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron) 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7306 21 00 Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm 2,950 N/A 2,950 3,245 3,540 3,835   7306 29 00 Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron) 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7306 30 12 Precision tubes, welded, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7306 30 18 Precision tubes, welded, of circular cross-section, of iron or non-alloy steel (excl. cold-drawn or cold-rolled) 2,050 N/A 2,050 2,255 2,460 2,665   7306 30 41 Threaded or threadable tubes "gas pipe", welded, of circular cross-section, of iron or non-alloy steel, plated or coated with zinc 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7306 30 49 Threaded or threadable tubes "gas pipe", welded, of circular cross-section, of iron or non-alloy steel (excl. products plated or coated with zinc) 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7306 30 72 Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel, of an external diameter of <= 168,3 mm, plated or coated with zinc (excl. line pipe of a kind used for oil or gas pipelines or casing and tubingof a kind used in drilling for oil or gas) 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7306 30 77 Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel of an external diameter of <= 168,3 mm (excl. plated or coated with zinc and line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used in drilling for oil or gas, precision tubes and threaded or threadable tubes "gas pipe") 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7306 30 80 Tubes, pipes and hollow profiles, welded, having a circular cross-section, of iron or steel, of an external diameter of > 168,3 mm but <= 406,4 mm (excl. line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, or precision steel tubes, electrical conduit tubes or threaded or threadable tubes "gas pipe") 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7306 40 20 Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. products having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) 2,950 N/A 2,950 3,245 3,540 3,835   7306 40 80 Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel (excl. products cold-drawn or cold-rolled "cold-reduced", tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) 2,950 N/A 2,950 3,245 3,540 3,835   7306 50 21 Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" 2,020 N/A 2,020 2,222 2,424 2,626 (F) 7306 50 29 Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless (excl. cold-drawn or cold-rolled) 2,020 N/A 2,020 2,222 2,424 2,626 (F) 7306 50 80 Tubes, pipes and hollow profiles, welded, of circular cross-section, of alloy steel other than stainless (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and precision steel tubes) 2,020 N/A 2,020 2,222 2,424 2,626 (F) 7306 61 10 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel 2,950 N/A 2,950 3,245 3,540 3,835   7306 61 92 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of <= 2 mm 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7306 61 99 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of > 2 mm 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7306 69 10 Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) 2,950 N/A 2,950 3,245 3,540 3,835   7306 69 90 Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of iron or steel other than stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7306 90 00 Tubes, pipes and hollow profiles "e.g., open seam, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless or welded tubes and pipes and tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm) 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7307 Tube or pipe fittings "e.g. couplings, elbows, sleeves", of iron or steel see below see below see below see below see below see below   7307 11 Tube or pipe fittings of non-malleable cast iron 1,960 N/A 1,960 2,156 2,352 2,548   7307 19 10 Tube or pipe fittings of cast iron (excl. of non-malleable) 1,960 N/A 1,960 2,156 2,352 2,548   7307 19 90 Cast tube or pipe fittings of steel 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7307 21 00 Flanges of stainless steel (excl. cast products) 2,310 N/A 2,310 2,541 2,772 3,003   7307 22 Threaded elbows, bends and sleeves of stainless steel (excl. cast products) 2,310 N/A 2,310 2,541 2,772 3,003   7307 23 Butt welding tube or pipe fittings of stainless steel (excl. cast products) 2,310 N/A 2,310 2,541 2,772 3,003   7307 29 Tube or pipe fittings of stainless steel (excl. cast products, flanges, threaded elbows, bends and sleeves and butt weldings fittings) 2,310 N/A 2,310 2,541 2,772 3,003   7307 91 00 Flanges of iron or steel (excl. cast or stainless products) 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7307 92 Threaded elbows, bends and sleeves, of stainless steel (excl. cast or stainless products) 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7307 93 Butt welding fittings of iron or steel (excl. cast iron or stainless steel products, and flanges) 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7307 99 Tube or pipe fittings, of iron or steel (excl. cast iron or stainless steel products; flanges; threaded elbows, bends and sleeves; butt welding fittings) 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7308 Structures and parts of structures "e.g., bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns", of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel (excl. prefabricated buildings of heading 9406) 2,540 N/A 2,540 2,794 3,048 3,302 (C) 7309 Reservoirs, tanks, vats and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of > 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated (excl. containers specifically constructed or equipped for one or more types of transport) 2,540 N/A 2,540 2,794 3,048 3,302 (C) 7310 Tanks, casks, drums, cans, boxes and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of <= 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated, n.e.s. 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7311 Containers of iron or steel, for compressed or liquefied gas (excl. containers specifically constructed or equipped for one or more types of transport) see below see below see below see below see below see below   7311 00 Containers of iron or steel, for compressed or liquefied gas (excl. containers specifically constructed or equipped for one or more types of transport) 2,460 N/A 2,460 2,706 2,952 3,198 (C) 7318 Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers, incl. spring washers, and similar articles, of iron or steel (excl. lag screws, stoppers, plugs and the like, threaded) see below see below see below see below see below see below   7318 11 00 Coach screws of iron or steel 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7318 12 10 Wood screws of stainless steel (excl. coach screws) 2,950 N/A 2,950 3,245 3,540 3,835 (C) 7318 12 90 Wood screws of iron or steel other than stainless (excl. coach screws) 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7318 13 00 Screw hooks and screw rings, of iron or steel 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7318 14 10 Self-tapping screws, of stainless steel (excl. wood screws) 2,950 N/A 2,950 3,245 3,540 3,835 (C) 7318 14 91 Spaced-thread screws of iron or steel other than stainless 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7318 14 99 Self-tapping screws of iron or steel other than stainless (excl. spaced-thread screws and wood screws) 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7318 15 Threaded screws and bolts, of iron or steel, whether or not with their nuts and washers (excl. coach screws and other wood screws, screw hooks and screw rings, self-tapping screws, lag screws, stoppers, plugs and the like, threaded) 2,170 N/A 2,170 2,387 2,604 2,821 (C) 7318 16 Nuts of iron or steel 2,170 N/A 2,170 2,387 2,604 2,821 (C) 7318 19 00 Threaded articles, of iron or steel, n.e.s. 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7318 21 00 Spring washers and other lock washers, of iron or steel 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7318 22 00 Washers of iron or steel (excl. spring washers and other lock washers) 2,180 N/A 2,180 2,398 2,616 2,834 (C) 7318 23 00 Rivets of iron or steel (excl. tubular and bifurcated rivets for particular uses) 2,130 N/A 2,130 2,343 2,556 2,769 (C) 7318 24 00 Cotters and cotter pins, of iron or steel 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7318 29 00 Non-threaded articles, of iron or steel 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7326 Articles of iron or steel, n.e.s. (excl. cast articles) see below see below see below see below see below see below   7326 11 00 Grinding balls and similar articles for mills, of iron or steel, forged or stamped, but not further worked 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7326 19 Articles of iron or steel, forged or stamped, but not further worked, n.e.s. (excl. grinding balls and similar articles for mills) 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7326 20 00 Articles of iron or steel wire, n.e.s. 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7326 90 30 Ladders and steps, of iron or steel 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7326 90 40 Pallets and similar platforms for handling goods, of iron or steel 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7326 90 50 Reels for cables, piping and the like, of iron or steel 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7326 90 60 Ventilators, non-mechanical, guttering, hooks and like articles used in the building industry, n.e.s., of iron or steel 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7326 90 92 Articles of iron or steel, open-die forged, n.e.s. 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7326 90 94 Articles of iron or steel, closed-die forged, n.e.s. 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7326 90 96 Sintered articles of iron or steel, n.e.s. 2,050 N/A 2,050 2,255 2,460 2,665 (C) 7326 90 98 Articles of iron or steel, n.e.s. 2,050 N/A 2,050 2,255 2,460 2,665 (C) China Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay 0,210 0,110 0,320 0,352 0,384 0,416 (A) 2523 10 00 White clinker 1,240 0,060 1,300 1,430 1,560 1,690 (B) 2523 10 00 Grey clinker 1,350 0,040 1,390 1,529 1,668 1,807 (A) 2523 21 00 White Portland cement 1,250 0,140 1,390 1,529 1,668 1,807   2523 29 00 Grey Portland cement 1,350 0,070 1,420 1,562 1,704 1,846   2523 90 00 White hydraulic cements 1,290 0,180 1,460 1,606 1,752 1,898 (B) 2523 90 00 Grey hydraulic cements 1,280 0,080 1,360 1,496 1,632 1,768 (A) 2523 30 00 Aluminous cement 1,980 0,200 2,180 2,398 2,616 2,834   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 3,020 0,060 3,080 3,111 3,111 3,111   2814 10 00 Anhydrous ammonia 4,170 0,190 4,360 4,404 4,404 4,404   2814 20 00 Ammonia in aqueous solution 1,250 0,060 1,310 1,323 1,323 1,323   2834 21 00 Nitrate of potassium 2,770 0,090 2,850 2,879 2,879 2,879   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,900 0,050 0,940 0,949 0,949 0,949   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 1,490 0,050 1,540 1,555 1,555 1,555   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 2,700 0,140 2,850 2,879 2,879 2,879   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 2,640 0,140 2,780 2,808 2,808 2,808   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,190 0,100 1,290 1,303 1,303 1,303   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 2,010 0,120 2,130 2,151 2,151 2,151   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 2,100 0,090 2,190 2,212 2,212 2,212   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 3,230 0,140 3,370 3,404 3,404 3,404   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,780 0,130 2,900 2,929 2,929 2,929   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,780 0,130 2,900 2,929 2,929 2,929   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 4,720 0,100 4,810 4,858 4,858 4,858   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,710 0,120 2,830 2,858 2,858 2,858   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 2,300 0,110 2,410 2,434 2,434 2,434   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 2,560 0,130 2,690 2,717 2,717 2,717   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 1,200 0,100 1,310 1,323 1,323 1,323   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,410 0,120 1,530 1,545 1,545 1,545   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,960 0,090 1,050 1,061 1,061 1,061   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,970 0,080 1,040 1,050 1,050 1,050   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,610 0,060 0,670 0,677 0,677 0,677   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,920 0,150 2,070 2,091 2,091 2,091   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 1,100 0,140 1,240 1,252 1,252 1,252   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,860 0,100 1,960 1,980 1,980 1,980   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,960 0,060 1,020 1,030 1,030 1,030   Aluminium         10 % mark-up 20 % mark-up 30 % mark-up   7601 Unwrought aluminium 3 N/A 3 3,300 3,600 3,900 (K) 7603 Aluminium powders and flakes 4,148 N/A 4,148 4,563 4,978 5,392 (K) 7604 10 10 Bars and rods 4,881 N/A 4,881 5,369 5,857 6,345 (K) 7604 10 90 Profiles 4,881 N/A 4,881 5,369 5,857 6,345 (K) 7604 21 00 Hollow profiles 4,881 N/A 4,881 5,369 5,857 6,345 (K) 7604 29 10 Bars and rods 4,881 N/A 4,881 5,369 5,857 6,345 (K) 7604 29 90 Profiles 4,881 N/A 4,881 5,369 5,857 6,345 (K) 7605 Aluminium wire 4,881 N/A 4,881 5,369 5,857 6,345 (K) 7606 Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm 4,120 N/A 4,120 4,532 4,944 5,356 (K) 7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm 5,559 N/A 5,559 6,115 6,671 7,227 (K) 7608 Aluminium tubes and pipes 4,896 N/A 4,896 5,385 5,875 6,364 (K) 7609 00 00 Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) 4,896 N/A 4,896 5,385 5,875 6,364 (K) 7610 10 00 Doors, windows and their frames and thresholds for doors 4,896 N/A 4,896 5,385 5,875 6,364 (K) 7610 90 Other 4,896 N/A 4,896 5,385 5,875 6,364 (K) 7610 90 10 Bridges and bridge-sections, towers and lattice masts 4,896 N/A 4,896 5,385 5,875 6,364 (K) 7610 90 90 Other 4,896 N/A 4,896 5,385 5,875 6,364 (K) 7611 00 00 Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 5,559 N/A 5,559 6,115 6,671 7,227 (K) 7612 Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 5,559 N/A 5,559 6,115 6,671 7,227 (K) 7613 00 00 Aluminium containers for compressed or liquefied gas 5,559 N/A 5,559 6,115 6,671 7,227 (K) 7614 Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated 4,881 N/A 4,881 5,369 5,857 6,345 (K) 7616 10 00 Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles 5,559 N/A 5,559 6,115 6,671 7,227 (K) 7616 91 00 Cloth, grill, netting and fencing, of aluminium wire 5,559 N/A 5,559 6,115 6,671 7,227 (K) 7616 99 10 Cast 4,542 N/A 4,542 4,996 5,450 5,904 (K) 7616 99 90 Other 5,559 N/A 5,559 6,115 6,671 7,227 (K) Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 26,640 N/A 26,640 29,304 31,968 34,632   Iron and steel         10 % mark-up 20 % mark-up 30 % mark-up   2601 12 00 Agglomerated iron ores and concentrates (excl. roasted iron pyrites) 0,200 0,060 0,260 0,286 0,312 0,338   7201 Pig iron and spiegeleisen, in pigs, blocks or other primary forms 1,660 N/A 1,660 1,826 1,992 2,158   7202 11 Ferro-manganese, containing by weight > 2% of carbon 1,690 N/A 1,690 1,859 2,028 2,197   7202 19 Ferro-manganese, containing by weight <= 2% carbon 5,590 N/A 5,590 6,149 6,708 7,267   7202 41 Ferro-chromium, containing by weight > 4% of carbon 2,350 N/A 2,350 2,585 2,820 3,055   7202 49 Ferro-chromium, containing by weight <= 4% of carbon 2,870 N/A 2,870 3,157 3,444 3,731   7202 60 00 Ferro-nickel 6,150 N/A 6,150 6,765 7,380 7,995   7203 Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99,94%, in lumps, pellets or similar forms – N/A – _ _ _   7205 Granules and powders of pig iron, spiegeleisen, iron or steel (excl. granules and powders of ferro-alloys, turnings and filings of iron or steel, radioactive iron powders "isotopes" and certain low-calibre, substandard balls for ballbearings) 2,802 N/A 2,802 3,082 3,362 3,643 (C) 7206 Iron and non-alloy steel in ingots or other primary forms (excl. remelting scrap ingots, products obtained by continuous casting and iron of heading 7203) see below see below see below see below see below see below   7206 10 00 Ingots, of iron and non-alloy steel (excl. remelted scrap ingots, continuous cast products, iron of heading 7203) 1,740 N/A 1,740 1,914 2,088 2,262 (C) 7206 90 00 Iron and non-alloy steel, in puddled bars or other primary forms (excl. ingots, remelted scrap ingots, continuous cast products, iron of heading 7203) 1,740 N/A 1,740 1,914 2,088 2,262 (C) 7207 Semi-finished products of iron or non-alloy steel see below see below see below see below see below see below   7207 11 11 Semi-finished products, of non-alloy free-cutting steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting 3,169 N/A 3,169 3,486 3,803 4,119 (C) 7207 11 14 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness of <= 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel) 3,169 N/A 3,169 3,486 3,803 4,119 (C) 7207 11 16 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness of > 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel) 3,169 N/A 3,169 3,486 3,803 4,119 (C) 7207 11 90 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular cross-section, the width < twice the thickness, forged 3,314 N/A 3,314 3,645 3,976 4,308 (C) 7207 12 10 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtained by continuous casting 3,169 N/A 3,169 3,486 3,803 4,119 (C) 7207 12 90 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular "other than square" cross-section, the width >= twice the thickness, forged 3,314 N/A 3,314 3,645 3,976 4,308 (C) 7207 19 12 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting 3,169 N/A 3,169 3,486 3,803 4,119 (C) 7207 19 19 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, forged 3,314 N/A 3,314 3,645 3,976 4,308 (C) 7207 19 80 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon (excl. semi-products, of square, rectangular, circular or polygonal cross-section) 3,169 N/A 3,169 3,486 3,803 4,119 (C) 7207 20 11 Semi-finished products, of non-alloy free-cutting steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting 3,169 N/A 3,169 3,486 3,803 4,119 (C) 7207 20 15 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% but < 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel) 3,169 N/A 3,169 3,486 3,803 4,119 (C) 7207 20 17 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel) 3,169 N/A 3,169 3,486 3,803 4,119 (C) 7207 20 19 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, forged 3,314 N/A 3,314 3,645 3,976 4,308 (C) 7207 20 32 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtained by continuous casting 3,169 N/A 3,169 3,486 3,803 4,119 (C) 7207 20 39 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of rectangular "other than square" cross-section and the width >= twice the thickness, forged 3,314 N/A 3,314 3,645 3,976 4,308 (C) 7207 20 52 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting 3,169 N/A 3,169 3,486 3,803 4,119 (C) 7207 20 59 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of circular or polygonal cross-section, forged 3,314 N/A 3,314 3,645 3,976 4,308 (C) 7207 20 80 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon (excl. those of square, rectangular, circular or polygonal cross-section) 3,169 N/A 3,169 3,486 3,803 4,119 (C) 7208 Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled, not clad, plated or coated 3,187 N/A 3,187 3,506 3,824 4,143 (C) 7209 Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, cold-rolled "cold-reduced", not clad, plated or coated 3,205 N/A 3,205 3,526 3,846 4,167 (C) 7210 Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated 3,205 N/A 3,205 3,526 3,846 4,167 (C) 7211 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", not clad, plated or coated see below see below see below see below see below see below   7211 13 00 Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as "wide flats" 3,187 N/A 3,187 3,506 3,824 4,143 (C) 7211 14 00 Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, not further worked than hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm (excl. "wide flats") 3,187 N/A 3,187 3,506 3,824 4,143 (C) 7211 19 00 Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, simply hot-rolled, not clad, plated or coated, of a thickness < 4,75 mm (excl. "wide flats") 3,187 N/A 3,187 3,506 3,824 4,143 (C) 7211 23 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight < 0,25% of carbon 3,205 N/A 3,205 3,526 3,846 4,167 (C) 7211 29 00 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight >= 0,25% of carbon 3,205 N/A 3,205 3,526 3,846 4,167 (C) 7211 90 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked, but not clad, plated or coated 3,205 N/A 3,205 3,526 3,846 4,167 (C) 7212 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated 3,205 N/A 3,205 3,526 3,846 4,167 (C) 7213 Bars and rods of iron or non-alloy steel, hot-rolled, in irregularly wound coils 3,169 N/A 3,169 3,486 3,803 4,119 (C) 7214 Bars and rods, of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but incl. those twisted after rolling (excl. in irregularly wound coils) see below see below see below see below see below see below   7214 10 00 Bars and rods, of iron or non-alloy steel, not further worked than forged (excl. in irregularly wound coils) 3,314 N/A 3,314 3,645 3,976 4,308 (C) 7214 20 00 Bars and rods, of iron or non-alloy steel, with indentations, ribs, groves or other deformations produced during the rolling process 3,169 N/A 3,169 3,486 3,803 4,119 (C) 7214 30 00 Bars and rods, of non-alloy free-cutting steel, not further worked than hot-rolled, hot-drawn or hot-extruded (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling) 3,169 N/A 3,169 3,486 3,803 4,119 (C) 7214 91 Bars and rods, of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, of rectangular "other than square" cross-section (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process, bars and rods twisted after rolling and free-cutting steel) 3,169 N/A 3,169 3,486 3,803 4,119 (C) 7214 99 Bars and rods, of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded (excl. of rectangular [other than square] cross-section and those containing indentations, ribs, grooves or other deformations produced during the rolling process, and of non-alloy free-cutting steel) 3,169 N/A 3,169 3,486 3,803 4,119 (C) 7215 Bars and rods, of iron or non-alloy steel, cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked, n.e.s. 3,169 N/A 3,169 3,486 3,803 4,119 (C) 7216 Angles, shapes and sections of iron or non-alloy steel, n.e.s. 3,169 N/A 3,169 3,486 3,803 4,119 (C) 7217 Wire of iron or non-alloy steel, in coils (excl. bars and rods) see below see below see below see below see below see below   7217 10 Wire of iron or non-alloy steel, in coils, not plated or coated, whether or not polished (excl. bars and rods) 3,169 N/A 3,169 3,486 3,803 4,119 (C) 7217 20 Wire of iron or non-alloy steel, in coils, plated or coated with zinc (excl. bars and rods) 3,169 N/A 3,169 3,486 3,803 4,119 (C) 7217 30 Wire of iron or non-alloy steel, in coils, plated or coated with base metals (excl. plated or coated with zinc, and bars and rods) 3,169 N/A 3,169 3,486 3,803 4,119 (C) 7217 90 Wire of iron or non-alloy steel, in coils, plated or coated (excl. plated or coated with base metals, and bars and rods) 3,169 N/A 3,169 3,486 3,803 4,119 (C) 7218 Stainless steel in ingots or other primary forms (excl. remelting scrap ingots and products obtained by continuous casting); semi-finished products of stainless steel see below see below see below see below see below see below   7218 10 00 Steel, stainless, in ingots and other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) 5,650 N/A 5,650 6,215 6,780 7,345   7218 91 Semi-finished products of stainless steel, of rectangular "other than square" cross-section 5,580 N/A 5,580 6,138 6,696 7,254   7218 99 11 Semi-finished products of stainless steel, of square cross-section, rolled or obtained by continuous casting 5,580 N/A 5,580 6,138 6,696 7,254   7218 99 19 Semi-finished products of stainless steel, of square cross-section, forged 5,650 N/A 5,650 6,215 6,780 7,345   7218 99 20 Semi-finished products of stainless steel, of circular cross-section or of cross-section other than square or rectangular, rolled or obtained by continuous casting 5,580 N/A 5,580 6,138 6,696 7,254   7218 99 80 Semi-finished products of stainless steel, forged (excl. products of square or rectangular cross-section) 5,650 N/A 5,650 6,215 6,780 7,345   7219 Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7219 11 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of > 10 mm 5,580 N/A 5,580 6,138 6,696 7,254   7219 12 Flat-rolled products of stainless steel, of a width of>= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 4,7 mm and <= 10 mm 5,580 N/A 5,580 6,138 6,696 7,254   7219 13 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 3 mm and < 4,75 mm 5,580 N/A 5,580 6,138 6,696 7,254   7219 14 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of < 3 mm 5,580 N/A 5,580 6,138 6,696 7,254   7219 21 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of > 10 mm 5,580 N/A 5,580 6,138 6,696 7,254   7219 22 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 4,75 mm and <= 10 mm 5,580 N/A 5,580 6,138 6,696 7,254   7219 23 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 3 mm and < 4,75 mm 5,580 N/A 5,580 6,138 6,696 7,254   7219 24 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of < 3 mm 5,580 N/A 5,580 6,138 6,696 7,254   7219 31 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 4,75 mm 5,590 N/A 5,590 6,149 6,708 7,267   7219 32 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 3 mm but < 4,75 mm 5,590 N/A 5,590 6,149 6,708 7,267   7219 33 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of > 1 mm but < 3 mm 5,590 N/A 5,590 6,149 6,708 7,267   7219 34 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 0,5 mm but <= 1 mm 5,590 N/A 5,590 6,149 6,708 7,267   7219 35 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of < 0,5 mm 5,590 N/A 5,590 6,149 6,708 7,267   7219 90 Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked 5,590 N/A 5,590 6,149 6,708 7,267   7220 Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7220 11 00 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of >= 4,75 mm 5,580 N/A 5,580 6,138 6,696 7,254   7220 12 00 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of < 4,75 mm 5,580 N/A 5,580 6,138 6,696 7,254   7220 20 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" 5,590 N/A 5,590 6,149 6,708 7,267   7220 90 Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked 5,590 N/A 5,590 6,149 6,708 7,267   7221 Bars and rods of stainless steel, hot-rolled, in irregularly wound coils 5,590 N/A 5,590 6,149 6,708 7,267   7222 Other bars and rods of stainless steel; angles, shapes and sections of stainless steel, n.e.s. see below see below see below see below see below see below   7222 11 Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only hot-extruded, of circular cross-section 5,590 N/A 5,590 6,149 6,708 7,267   7222 19 Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only extruded (excl. of circular cross-section) 5,590 N/A 5,590 6,149 6,708 7,267   7222 20 Other bars and rods of stainless steel, not further worked than cold-formed or cold-finished 5,590 N/A 5,590 6,149 6,708 7,267   7222 30 Other bars and rods of stainless steel, cold-formed or cold-finished and further worked, or not further worked than forged, or forged, or hot-formed by other means and further worked, n.e.s. 5,650 N/A 5,650 6,215 6,780 7,345   7222 40 Angles, shapes and sections of stainless steel, n.e.s. 5,590 N/A 5,590 6,149 6,708 7,267   7223 Wire of stainless steel, in coils (excl. bars and rods) see below see below see below see below see below see below   7223 00 Wire of stainless steel, in coils (excl. bars and rods) 5,590 N/A 5,590 6,149 6,708 7,267   7224 Steel, alloy, other than stainless, in ingots or other primary forms, semi-finished products of alloy steel other than stainless (excl. waste and scrap in ingot form, and products obtained by continuous casting) see below see below see below see below see below see below   7224 10 Steel, alloy, other than stainless, in ingots or other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) 6,180 N/A 6,180 6,798 7,416 8,034 (F) 7224 90 02 Semi-finished products of tool steel 6,110 N/A 6,110 6,721 7,332 7,943 (F) 7224 90 03 Semi-finished products of high-speed steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting the width measuring < twice the thickness 6,110 N/A 6,110 6,721 7,332 7,943 (F) 7224 90 05 Semi-finished products of steel containing by weight <= 0,7% of carbon, 0,5% to 1,2% of manganese, 0,6% to 2,3% of silicon, or of steel containing by weight >= 0,0008% of boron with any other element < the minimum content referred to in Note 1 f to chapter 72, of square or rectangular cross-section, hot rolled or obtained by continuous casting, the width measuring < twice the thickness 6,110 N/A 6,110 6,721 7,332 7,943 (F) 7224 90 07 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring < twice the thickness (excl. of tool steel, high-speed steel and articles of subheading 7224.90.05) 6,110 N/A 6,110 6,721 7,332 7,943 (F) 7224 90 14 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring >= twice the thickness (excl. of tool steel) 6,110 N/A 6,110 6,721 7,332 7,943 (F) 7224 90 18 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, forged (excl. of tool steel) 6,180 N/A 6,180 6,798 7,416 8,034 (F) 7224 90 31 Semi-finished products of steel containing by weight 0,9% to 1,15% carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting 6,110 N/A 6,110 6,721 7,332 7,943 (F) 7224 90 38 Semi-finished products of alloy steel, other than stainless steel, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting (excl. of tool steel and products containing by weight 0,9% to 1,15% of carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum) 6,110 N/A 6,110 6,721 7,332 7,943 (F) 7224 90 90 Semi-finished products of alloy steel, other than stainless steel, forged (excl. of tool steel and products of square or rectangular, circular or polygamol cross-section) 6,180 N/A 6,180 6,798 7,416 8,034 (F) 7225 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7225 11 00 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, grain-oriented 8,090 N/A 8,090 8,899 9,708 10,517 (C) 7225 19 10 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, hot-rolled 6,110 N/A 6,110 6,721 7,332 7,943 (C) 7225 19 90 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, cold-rolled "cold-reduced", non-grain-oriented 6,120 N/A 6,120 6,732 7,344 7,956 (F) 7225 30 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, in coils (excl. products of silicon-electrical steel) 6,110 N/A 6,110 6,721 7,332 7,943 (F) 7225 40 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, not in coils (excl. products of silicon-electrical steel) 6,110 N/A 6,110 6,721 7,332 7,943 (F) 7225 50 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of silicon-electrical steel) 6,120 N/A 6,120 6,732 7,344 7,956 (F) 7225 91 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and electrolytically plated or coated with zinc (excl. products of silicon-electrical steel) 6,120 N/A 6,120 6,732 7,344 7,956 (F) 7225 92 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and plated or coated with zinc (excl. electrolytically plated or coated and products of silicon-electrical steel) 6,120 N/A 6,120 6,732 7,344 7,956 (F) 7225 99 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. plated or coated with zinc and products of silicon-electrical steel) 6,120 N/A 6,120 6,732 7,344 7,956 (F) 7226 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7226 11 00 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", grain-oriented 8,090 N/A 8,090 8,899 9,708 10,517 (C) 7226 19 10 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, not further worked than hot-rolled 6,110 N/A 6,110 6,721 7,332 7,943 (C) 7226 19 80 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, cold-rolled "cold-reduced", whether or not further worked, or hot-rolled and further worked, non-grain-oriented 6,120 N/A 6,120 6,732 7,344 7,956 (F) 7226 20 00 Flat-rolled products of high-speed steel, of a width of <= 600 mm, hot-rolled or cold-rolled "cold-reduced" 6,110 N/A 6,110 6,721 7,332 7,943 (F) 7226 91 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than hot-rolled (excl. products of high-speed steel or silicon-electrical steel) 6,110 N/A 6,110 6,721 7,332 7,943 (F) 7226 92 00 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of high-speed steel or silicon-electrical steel) 6,120 N/A 6,120 6,732 7,344 7,956 (F) 7226 99 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. products of high-speed steel or silicon-electrical steel) 6,120 N/A 6,120 6,732 7,344 7,956 (F) 7227 Bars and rods of alloy steel other than stainless, hot-rolled, in irregularly wound coils 6,120 N/A 6,120 6,732 7,344 7,956 (C)/(F) 7228 Other bars and rods of alloy steel other than stainless, angles, shapes and sections of alloy steel other than stainless, n.e.s.; hollow drill bars and rods, of alloy or non-alloy steel see below see below see below see below see below see below   7228 10 20 Bars and rods of high-speed steel, not further worked than hot-rolled, hot-drawn or extruded, and hot-rolled, hot-drawn or extruded, not further worked than clad (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 6,120 N/A 6,120 6,732 7,344 7,956 (F) 7228 10 50 Bars and rods of high-speed steel, forged (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 6,180 N/A 6,180 6,798 7,416 8,034 (F) 7228 10 90 Bars and rods of high-speed steel, not further worked than cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked (excl. forged products, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 6,120 N/A 6,120 6,732 7,344 7,956 (F) 7228 20 Bars and rods of silico-manganese steel (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 6,120 N/A 6,120 6,732 7,344 7,956 (F) 7228 30 Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 6,120 N/A 6,120 6,732 7,344 7,956 (C)/(F) 7228 40 Bars and rods of alloy steel other than stainless, not further worked than forged (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 6,180 N/A 6,180 6,798 7,416 8,034 (F) 7228 50 Bars and rods of alloy steel other than stainless, not further worked than cold-formed or cold-finished (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 6,120 N/A 6,120 6,732 7,344 7,956 (C)/(F) 7228 60 Bars and rods of alloy steel other than stainless, cold-formed or cold-finished and further worked or hot-formed and further worked, n.e.s. (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 6,120 N/A 6,120 6,732 7,344 7,956 (F) 7228 70 Angles, shapes and sections of alloy steel other than stainless, n.e.s. 6,120 N/A 6,120 6,732 7,344 7,956 (F) 7228 80 00 Hollow drill bars and rods, of alloy or non-alloy steel 6,120 N/A 6,120 6,732 7,344 7,956 (F) 7229 Wire of alloy steel other than stainless, in coils (excl. bars and rods) 6,120 N/A 6,120 6,732 7,344 7,956 (C)/(F) 7301 Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel 2,275 N/A 2,275 2,502 2,730 2,957 (C) 7302 Railway or tramway track construction material of iron or steel, the following : rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers "cross-ties", fish-plates, chairs, chair wedges, sole plates "base plates", rail clips, bedplates, ties and other material specialised for jointing or fixing rails 6,205 N/A 6,205 6,826 7,446 8,067 (C) 7303 Tubes, pipes and hollow profiles, of cast iron see below see below see below see below see below see below   7303 00 Tubes, pipes and hollow profiles, of cast iron 2,191 N/A 2,191 2,410 2,629 2,848   7304 Tubes, pipes and hollow profiles, seamless, of iron or steel (excl. products of cast iron) see below see below see below see below see below see below   7304 11 00 Line pipe of a kind used for oil or gas pipelines, seamless, of stainless steel 7,005 N/A 7,005 7,706 8,406 9,107   7304 19 Line pipe of a kind used for oil or gas pipelines, seamless, of iron or steel (excl. products of stainless steel or of cast iron) 2,680 N/A 2,680 2,948 3,216 3,484 (C) 7304 22 00 Drill pipe, seamless, of stainless steel, of a kind used in drilling for oil or gas 7,005 N/A 7,005 7,706 8,406 9,107   7304 23 00 Drill pipe, seamless, of a kind used in drilling for oil or gas, of iron or steel (excl. products of stainless steel or of cast iron) 2,680 N/A 2,680 2,948 3,216 3,484 (C) 7304 24 00 Casing and tubing, seamless, of a kind used for drilling for oil or gas, of stainless steel 7,005 N/A 7,005 7,706 8,406 9,107   7304 29 Casing and tubing, seamless, of iron or steel, of a kind used in drilling for oil or gas (excl. products of cast iron) 2,680 N/A 2,680 2,948 3,216 3,484 (C) 7304 31 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" (excl. cast iron products and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used for drilling for oil or gas) 2,680 N/A 2,680 2,948 3,216 3,484 (C) 7304 39 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, not cold-drawn or cold-rolled "cold-reduced" (excl. cast iron products, line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas) 2,680 N/A 2,680 2,948 3,216 3,484 (C) 7304 41 00 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas) 7,005 N/A 7,005 7,706 8,406 9,107   7304 49 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines or of a kind used for drilling for oil or gas) 7,005 N/A 7,005 7,706 8,406 9,107   7304 51 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil) 2,680 N/A 2,680 2,948 3,216 3,484 (F) 7304 59 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil) 2,680 N/A 2,680 2,948 3,216 3,484 (C)/(F) 7304 90 00 Tubes, pipes and hollow profiles, seamless, of non-circular cross-section, of iron or steel (excl. products of cast iron) 2,680 N/A 2,680 2,948 3,216 3,484 (C) 7305 Tubes and pipes, having circular cross-sections and an external diameter of > 406,4 mm, of flat-rolled products of iron or steel "e.g., welded, riveted or similarly closed" 2,585 N/A 2,585 2,844 3,102 3,361 (C) 7306 Tubes, pipes and hollow profiles "e.g., open seam or welded, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless tubes and pipes and tubes having internal and external circular cross-sections and an external diameter of > 406,4 mm) see below see below see below see below see below see below   7306 11 00 Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm 7,025 N/A 7,025 7,728 8,430 9,133   7306 19 00 Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron) 3,565 N/A 3,565 3,922 4,278 4,635 (C) 7306 21 00 Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm 7,025 N/A 7,025 7,728 8,430 9,133   7306 29 00 Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron) 3,565 N/A 3,565 3,922 4,278 4,635 (C) 7306 30 12 Precision tubes, welded, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" 3,565 N/A 3,565 3,922 4,278 4,635 (C) 7306 30 18 Precision tubes, welded, of circular cross-section, of iron or non-alloy steel (excl. cold-drawn or cold-rolled) 3,565 N/A 3,565 3,922 4,278 4,635   7306 30 41 Threaded or threadable tubes "gas pipe", welded, of circular cross-section, of iron or non-alloy steel, plated or coated with zinc 3,565 N/A 3,565 3,922 4,278 4,635 (C) 7306 30 49 Threaded or threadable tubes "gas pipe", welded, of circular cross-section, of iron or non-alloy steel (excl. products plated or coated with zinc) 3,565 N/A 3,565 3,922 4,278 4,635 (C) 7306 30 72 Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel, of an external diameter of <= 168,3 mm, plated or coated with zinc (excl. line pipe of a kind used for oil or gas pipelines or casing and tubingof a kind used in drilling for oil or gas) 3,565 N/A 3,565 3,922 4,278 4,635 (C) 7306 30 77 Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel of an external diameter of <= 168,3 mm (excl. plated or coated with zinc and line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used in drilling for oil or gas, precision tubes and threaded or threadable tubes "gas pipe") 3,565 N/A 3,565 3,922 4,278 4,635 (C) 7306 30 80 Tubes, pipes and hollow profiles, welded, having a circular cross-section, of iron or steel, of an external diameter of > 168,3 mm but <= 406,4 mm (excl. line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, or precision steel tubes, electrical conduit tubes or threaded or threadable tubes "gas pipe") 3,565 N/A 3,565 3,922 4,278 4,635 (C) 7306 40 20 Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. products having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) 7,025 N/A 7,025 7,728 8,430 9,133   7306 40 80 Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel (excl. products cold-drawn or cold-rolled "cold-reduced", tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) 7,015 N/A 7,015 7,717 8,418 9,120   7306 50 21 Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" 3,565 N/A 3,565 3,922 4,278 4,635 (F) 7306 50 29 Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless (excl. cold-drawn or cold-rolled) 3,565 N/A 3,565 3,922 4,278 4,635 (F) 7306 50 80 Tubes, pipes and hollow profiles, welded, of circular cross-section, of alloy steel other than stainless (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and precision steel tubes) 3,565 N/A 3,565 3,922 4,278 4,635 (F) 7306 61 10 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel 7,025 N/A 7,025 7,728 8,430 9,133   7306 61 92 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of <= 2 mm 3,565 N/A 3,565 3,922 4,278 4,635 (C) 7306 61 99 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of > 2 mm 3,565 N/A 3,565 3,922 4,278 4,635 (C) 7306 69 10 Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) 7,025 N/A 7,025 7,728 8,430 9,133   7306 69 90 Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of iron or steel other than stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) 3,565 N/A 3,565 3,922 4,278 4,635 (C) 7306 90 00 Tubes, pipes and hollow profiles "e.g., open seam, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless or welded tubes and pipes and tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm) 3,565 N/A 3,565 3,922 4,278 4,635 (C) 7307 Tube or pipe fittings "e.g. couplings, elbows, sleeves", of iron or steel see below see below see below see below see below see below   7307 11 Tube or pipe fittings of non-malleable cast iron 3,252 N/A 3,252 3,577 3,902 4,228   7307 19 10 Tube or pipe fittings of cast iron (excl. of non-malleable) 3,252 N/A 3,252 3,577 3,902 4,228   7307 19 90 Cast tube or pipe fittings of steel 3,252 N/A 3,252 3,577 3,902 4,228 (C) 7307 21 00 Flanges of stainless steel (excl. cast products) 5,035 N/A 5,035 5,539 6,042 6,546   7307 22 Threaded elbows, bends and sleeves of stainless steel (excl. cast products) 5,035 N/A 5,035 5,539 6,042 6,546   7307 23 Butt welding tube or pipe fittings of stainless steel (excl. cast products) 5,035 N/A 5,035 5,539 6,042 6,546   7307 29 Tube or pipe fittings of stainless steel (excl. cast products, flanges, threaded elbows, bends and sleeves and butt weldings fittings) 5,035 N/A 5,035 5,539 6,042 6,546   7307 91 00 Flanges of iron or steel (excl. cast or stainless products) 3,252 N/A 3,252 3,577 3,902 4,228 (C) 7307 92 Threaded elbows, bends and sleeves, of stainless steel (excl. cast or stainless products) 3,252 N/A 3,252 3,577 3,902 4,228 (C) 7307 93 Butt welding fittings of iron or steel (excl. cast iron or stainless steel products, and flanges) 3,252 N/A 3,252 3,577 3,902 4,228 (C) 7307 99 Tube or pipe fittings, of iron or steel (excl. cast iron or stainless steel products; flanges; threaded elbows, bends and sleeves; butt welding fittings) 3,252 N/A 3,252 3,577 3,902 4,228 (C) 7308 Structures and parts of structures "e.g., bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns", of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel (excl. prefabricated buildings of heading 9406) 6,035 N/A 6,035 6,639 7,242 7,846 (C) 7309 Reservoirs, tanks, vats and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of > 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated (excl. containers specifically constructed or equipped for one or more types of transport) 6,655 N/A 6,655 7,321 7,986 8,652 (C) 7310 Tanks, casks, drums, cans, boxes and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of <= 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated, n.e.s. 4,312 N/A 4,312 4,743 5,174 5,605 (C) 7311 Containers of iron or steel, for compressed or liquefied gas (excl. containers specifically constructed or equipped for one or more types of transport) see below see below see below see below see below see below   7311 00 Containers of iron or steel, for compressed or liquefied gas (excl. containers specifically constructed or equipped for one or more types of transport) 6,645 N/A 6,645 7,310 7,974 8,639 (C) 7318 Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers, incl. spring washers, and similar articles, of iron or steel (excl. lag screws, stoppers, plugs and the like, threaded) see below see below see below see below see below see below   7318 11 00 Coach screws of iron or steel 2,738 N/A 2,738 3,012 3,286 3,559 (C) 7318 12 10 Wood screws of stainless steel (excl. coach screws) 7,005 N/A 7,005 7,706 8,406 9,107 (C) 7318 12 90 Wood screws of iron or steel other than stainless (excl. coach screws) 2,738 N/A 2,738 3,012 3,286 3,559 (C) 7318 13 00 Screw hooks and screw rings, of iron or steel 2,738 N/A 2,738 3,012 3,286 3,559 (C) 7318 14 10 Self-tapping screws, of stainless steel (excl. wood screws) 7,005 N/A 7,005 7,706 8,406 9,107 (C) 7318 14 91 Spaced-thread screws of iron or steel other than stainless 2,738 N/A 2,738 3,012 3,286 3,559 (C) 7318 14 99 Self-tapping screws of iron or steel other than stainless (excl. spaced-thread screws and wood screws) 2,738 N/A 2,738 3,012 3,286 3,559 (C) 7318 15 Threaded screws and bolts, of iron or steel, whether or not with their nuts and washers (excl. coach screws and other wood screws, screw hooks and screw rings, self-tapping screws, lag screws, stoppers, plugs and the like, threaded) 6,375 N/A 6,375 7,013 7,650 8,288 (C) 7318 16 Nuts of iron or steel 5,045 N/A 5,045 5,550 6,054 6,559 (C) 7318 19 00 Threaded articles, of iron or steel, n.e.s. 2,738 N/A 2,738 3,012 3,286 3,559 (C) 7318 21 00 Spring washers and other lock washers, of iron or steel 2,738 N/A 2,738 3,012 3,286 3,559 (C) 7318 22 00 Washers of iron or steel (excl. spring washers and other lock washers) 4,555 N/A 4,555 5,011 5,466 5,922 (C) 7318 23 00 Rivets of iron or steel (excl. tubular and bifurcated rivets for particular uses) 2,738 N/A 2,738 3,012 3,286 3,559 (C) 7318 24 00 Cotters and cotter pins, of iron or steel 2,738 N/A 2,738 3,012 3,286 3,559 (C) 7318 29 00 Non-threaded articles, of iron or steel 2,738 N/A 2,738 3,012 3,286 3,559 (C) 7326 Articles of iron or steel, n.e.s. (excl. cast articles) see below see below see below see below see below see below   7326 11 00 Grinding balls and similar articles for mills, of iron or steel, forged or stamped, but not further worked 3,076 N/A 3,076 3,384 3,691 3,999 (C) 7326 19 Articles of iron or steel, forged or stamped, but not further worked, n.e.s. (excl. grinding balls and similar articles for mills) 3,076 N/A 3,076 3,384 3,691 3,999 (C) 7326 20 00 Articles of iron or steel wire, n.e.s. 3,076 N/A 3,076 3,384 3,691 3,999 (C) 7326 90 30 Ladders and steps, of iron or steel 3,076 N/A 3,076 3,384 3,691 3,999 (C) 7326 90 40 Pallets and similar platforms for handling goods, of iron or steel 3,076 N/A 3,076 3,384 3,691 3,999 (C) 7326 90 50 Reels for cables, piping and the like, of iron or steel 3,076 N/A 3,076 3,384 3,691 3,999 (C) 7326 90 60 Ventilators, non-mechanical, guttering, hooks and like articles used in the building industry, n.e.s., of iron or steel 3,076 N/A 3,076 3,384 3,691 3,999 (C) 7326 90 92 Articles of iron or steel, open-die forged, n.e.s. 3,076 N/A 3,076 3,384 3,691 3,999 (C) 7326 90 94 Articles of iron or steel, closed-die forged, n.e.s. 3,076 N/A 3,076 3,384 3,691 3,999 (C) 7326 90 96 Sintered articles of iron or steel, n.e.s. 3,076 N/A 3,076 3,384 3,691 3,999 (C) 7326 90 98 Articles of iron or steel, n.e.s. 3,076 N/A 3,076 3,384 3,691 3,999 (C) Colombia Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – _ _ _   2523 10 00 White clinker – – – _ _ _   2523 10 00 Grey clinker 1,090 0,020 1,110 1,221 1,332 1,443 (A) 2523 21 00 White Portland cement 1,210 0,120 1,330 1,463 1,596 1,729   2523 29 00 Grey Portland cement 1,090 0,030 1,120 1,232 1,344 1,456   2523 90 00 White hydraulic cements – – – _ _ _   2523 90 00 Grey hydraulic cements – – – _ _ _   2523 30 00 Aluminous cement – – – _ _ _   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 1,900 0,020 1,930 1,949 1,949 1,949   2814 10 00 Anhydrous ammonia 2,260 0,080 2,340 2,363 2,363 2,363   2814 20 00 Ammonia in aqueous solution 0,680 0,020 0,700 0,707 0,707 0,707   2834 21 00 Nitrate of potassium 1,680 0,030 1,720 1,737 1,737 1,737   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,510 0,020 0,520 0,525 0,525 0,525   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,840 0,020 0,860 0,869 0,869 0,869   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,530 0,050 1,580 1,596 1,596 1,596   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,500 0,050 1,550 1,566 1,566 1,566   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,660 0,040 0,700 0,707 0,707 0,707   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,190 0,040 1,230 1,242 1,242 1,242   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,280 0,030 1,310 1,323 1,323 1,323   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,970 0,050 2,020 2,040 2,040 2,040   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,700 0,040 1,740 1,757 1,757 1,757   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,700 0,040 1,740 1,757 1,757 1,757   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,970 0,040 3,010 3,040 3,040 3,040   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,650 0,040 1,690 1,707 1,707 1,707   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,360 0,040 1,400 1,414 1,414 1,414   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,490 0,050 1,540 1,555 1,555 1,555   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,700 0,040 0,740 0,747 0,747 0,747   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,850 0,040 0,900 0,909 0,909 0,909   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,580 0,030 0,610 0,616 0,616 0,616   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,530 0,030 0,560 0,566 0,566 0,566   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,340 0,020 0,360 0,364 0,364 0,364   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,160 0,050 1,220 1,232 1,232 1,232   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,610 0,070 0,680 0,687 0,687 0,687   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,130 0,030 1,160 1,172 1,172 1,172   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,580 0,020 0,600 0,606 0,606 0,606   Aluminium         10 % mark-up 20 % mark-up 30 % mark-up   7601 Unwrought aluminium 0,360 N/A 0,360 0,396 0,432 0,468 (L) 7603 Aluminium powders and flakes 1,030 N/A 1,030 1,133 1,236 1,339 (L) 7604 10 10 Bars and rods 1,250 N/A 1,250 1,375 1,500 1,625 (L) 7604 10 90 Profiles 1,270 N/A 1,270 1,397 1,524 1,651 (L) 7604 21 00 Hollow profiles 1,270 N/A 1,270 1,397 1,524 1,651 (L) 7604 29 10 Bars and rods 1,250 N/A 1,250 1,375 1,500 1,625 (L) 7604 29 90 Profiles 1,270 N/A 1,270 1,397 1,524 1,651 (L) 7605 Aluminium wire 1,250 N/A 1,250 1,375 1,500 1,625 (L) 7606 Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm 1,710 N/A 1,710 1,881 2,052 2,223 (L) 7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm 1,710 N/A 1,710 1,881 2,052 2,223 (L) 7608 Aluminium tubes and pipes 1,270 N/A 1,270 1,397 1,524 1,651 (L) 7609 00 00 Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) 1,270 N/A 1,270 1,397 1,524 1,651 (L) 7610 10 00 Doors, windows and their frames and thresholds for doors 1,270 N/A 1,270 1,397 1,524 1,651 (L) 7610 90 Other 1,270 N/A 1,270 1,397 1,524 1,651 (L) 7610 90 10 Bridges and bridge-sections, towers and lattice masts 1,270 N/A 1,270 1,397 1,524 1,651 (L) 7610 90 90 Other 1,270 N/A 1,270 1,397 1,524 1,651 (L) 7611 00 00 Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 1,710 N/A 1,710 1,881 2,052 2,223 (L) 7612 Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 1,710 N/A 1,710 1,881 2,052 2,223 (L) 7613 00 00 Aluminium containers for compressed or liquefied gas 1,710 N/A 1,710 1,881 2,052 2,223 (L) 7614 Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated 1,250 N/A 1,250 1,375 1,500 1,625 (L) 7616 10 00 Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles 1,710 N/A 1,710 1,881 2,052 2,223 (L) 7616 91 00 Cloth, grill, netting and fencing, of aluminium wire 1,710 N/A 1,710 1,881 2,052 2,223 (L) 7616 99 10 Cast 1,030 N/A 1,030 1,133 1,236 1,339 (L) 7616 99 90 Other 1,710 N/A 1,710 1,881 2,052 2,223 (L) Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066   Iron and steel         10 % mark-up 20 % mark-up 30 % mark-up   2601 12 00 Agglomerated iron ores and concentrates (excl. roasted iron pyrites) 0,300 0,010 0,310 0,341 0,372 0,403   7201 Pig iron and spiegeleisen, in pigs, blocks or other primary forms 1,930 N/A 1,930 2,123 2,316 2,509   7202 11 Ferro-manganese, containing by weight > 2% of carbon 1,690 N/A 1,690 1,859 2,028 2,197   7202 19 Ferro-manganese, containing by weight <= 2% carbon – N/A – _ _ _   7202 41 Ferro-chromium, containing by weight > 4% of carbon 2,350 N/A 2,350 2,585 2,820 3,055   7202 49 Ferro-chromium, containing by weight <= 4% of carbon – N/A – _ _ _   7202 60 00 Ferro-nickel 3,480 N/A 3,480 3,828 4,176 4,524   7203 Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99,94%, in lumps, pellets or similar forms – N/A – _ _ _   7205 Granules and powders of pig iron, spiegeleisen, iron or steel (excl. granules and powders of ferro-alloys, turnings and filings of iron or steel, radioactive iron powders "isotopes" and certain low-calibre, substandard balls for ballbearings) 2,020 N/A 2,020 2,222 2,424 2,626 (C) 7206 Iron and non-alloy steel in ingots or other primary forms (excl. remelting scrap ingots, products obtained by continuous casting and iron of heading 7203) see below see below see below see below see below see below   7206 10 00 Ingots, of iron and non-alloy steel (excl. remelted scrap ingots, continuous cast products, iron of heading 7203) 2,100 N/A 2,100 2,310 2,520 2,730 (C) 7206 90 00 Iron and non-alloy steel, in puddled bars or other primary forms (excl. ingots, remelted scrap ingots, continuous cast products, iron of heading 7203) 2,110 N/A 2,110 2,321 2,532 2,743 (C) 7207 Semi-finished products of iron or non-alloy steel see below see below see below see below see below see below   7207 11 11 Semi-finished products, of non-alloy free-cutting steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting 2,110 N/A 2,110 2,321 2,532 2,743 (C) 7207 11 14 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness of <= 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel) 2,110 N/A 2,110 2,321 2,532 2,743 (C) 7207 11 16 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness of > 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel) 2,110 N/A 2,110 2,321 2,532 2,743 (C) 7207 11 90 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular cross-section, the width < twice the thickness, forged 2,100 N/A 2,100 2,310 2,520 2,730 (C) 7207 12 10 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtained by continuous casting 2,110 N/A 2,110 2,321 2,532 2,743 (C) 7207 12 90 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular "other than square" cross-section, the width >= twice the thickness, forged 2,100 N/A 2,100 2,310 2,520 2,730 (C) 7207 19 12 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting 2,110 N/A 2,110 2,321 2,532 2,743 (C) 7207 19 19 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, forged 2,100 N/A 2,100 2,310 2,520 2,730 (C) 7207 19 80 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon (excl. semi-products, of square, rectangular, circular or polygonal cross-section) 2,110 N/A 2,110 2,321 2,532 2,743 (C) 7207 20 11 Semi-finished products, of non-alloy free-cutting steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting 2,110 N/A 2,110 2,321 2,532 2,743 (C) 7207 20 15 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% but < 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel) 2,110 N/A 2,110 2,321 2,532 2,743 (C) 7207 20 17 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel) 2,110 N/A 2,110 2,321 2,532 2,743 (C) 7207 20 19 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, forged 2,100 N/A 2,100 2,310 2,520 2,730 (C) 7207 20 32 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtained by continuous casting 2,110 N/A 2,110 2,321 2,532 2,743 (C) 7207 20 39 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of rectangular "other than square" cross-section and the width >= twice the thickness, forged 2,100 N/A 2,100 2,310 2,520 2,730 (C) 7207 20 52 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting 2,110 N/A 2,110 2,321 2,532 2,743 (C) 7207 20 59 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of circular or polygonal cross-section, forged 2,100 N/A 2,100 2,310 2,520 2,730 (C) 7207 20 80 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon (excl. those of square, rectangular, circular or polygonal cross-section) 2,110 N/A 2,110 2,321 2,532 2,743 (C) 7208 Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled, not clad, plated or coated 2,560 N/A 2,560 2,816 3,072 3,328 (C) 7209 Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, cold-rolled "cold-reduced", not clad, plated or coated 2,890 N/A 2,890 3,179 3,468 3,757 (C) 7210 Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated 2,890 N/A 2,890 3,179 3,468 3,757 (C) 7211 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", not clad, plated or coated see below see below see below see below see below see below   7211 13 00 Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as "wide flats" 2,560 N/A 2,560 2,816 3,072 3,328 (C) 7211 14 00 Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, not further worked than hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm (excl. "wide flats") 2,560 N/A 2,560 2,816 3,072 3,328 (C) 7211 19 00 Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, simply hot-rolled, not clad, plated or coated, of a thickness < 4,75 mm (excl. "wide flats") 2,560 N/A 2,560 2,816 3,072 3,328 (C) 7211 23 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight < 0,25% of carbon 2,890 N/A 2,890 3,179 3,468 3,757 (C) 7211 29 00 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight >= 0,25% of carbon 2,890 N/A 2,890 3,179 3,468 3,757 (C) 7211 90 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked, but not clad, plated or coated 2,890 N/A 2,890 3,179 3,468 3,757 (C) 7212 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated 2,890 N/A 2,890 3,179 3,468 3,757 (C) 7213 Bars and rods of iron or non-alloy steel, hot-rolled, in irregularly wound coils 2,110 N/A 2,110 2,321 2,532 2,743 (C) 7214 Bars and rods, of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but incl. those twisted after rolling (excl. in irregularly wound coils) see below see below see below see below see below see below   7214 10 00 Bars and rods, of iron or non-alloy steel, not further worked than forged (excl. in irregularly wound coils) 2,100 N/A 2,100 2,310 2,520 2,730 (C) 7214 20 00 Bars and rods, of iron or non-alloy steel, with indentations, ribs, groves or other deformations produced during the rolling process 2,110 N/A 2,110 2,321 2,532 2,743 (C) 7214 30 00 Bars and rods, of non-alloy free-cutting steel, not further worked than hot-rolled, hot-drawn or hot-extruded (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling) 2,110 N/A 2,110 2,321 2,532 2,743 (C) 7214 91 Bars and rods, of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, of rectangular "other than square" cross-section (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process, bars and rods twisted after rolling and free-cutting steel) 2,110 N/A 2,110 2,321 2,532 2,743 (C) 7214 99 Bars and rods, of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded (excl. of rectangular [other than square] cross-section and those containing indentations, ribs, grooves or other deformations produced during the rolling process, and of non-alloy free-cutting steel) 2,110 N/A 2,110 2,321 2,532 2,743 (C) 7215 Bars and rods, of iron or non-alloy steel, cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked, n.e.s. 2,110 N/A 2,110 2,321 2,532 2,743 (C) 7216 Angles, shapes and sections of iron or non-alloy steel, n.e.s. 2,110 N/A 2,110 2,321 2,532 2,743 (C) 7217 Wire of iron or non-alloy steel, in coils (excl. bars and rods) see below see below see below see below see below see below   7217 10 Wire of iron or non-alloy steel, in coils, not plated or coated, whether or not polished (excl. bars and rods) 2,110 N/A 2,110 2,321 2,532 2,743 (C) 7217 20 Wire of iron or non-alloy steel, in coils, plated or coated with zinc (excl. bars and rods) 2,110 N/A 2,110 2,321 2,532 2,743 (C) 7217 30 Wire of iron or non-alloy steel, in coils, plated or coated with base metals (excl. plated or coated with zinc, and bars and rods) 2,110 N/A 2,110 2,321 2,532 2,743 (C) 7217 90 Wire of iron or non-alloy steel, in coils, plated or coated (excl. plated or coated with base metals, and bars and rods) 2,110 N/A 2,110 2,321 2,532 2,743 (C) 7218 Stainless steel in ingots or other primary forms (excl. remelting scrap ingots and products obtained by continuous casting); semi-finished products of stainless steel see below see below see below see below see below see below   7218 10 00 Steel, stainless, in ingots and other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) 3,070 N/A 3,070 3,377 3,684 3,991   7218 91 Semi-finished products of stainless steel, of rectangular "other than square" cross-section 3,820 N/A 3,820 4,202 4,584 4,966   7218 99 11 Semi-finished products of stainless steel, of square cross-section, rolled or obtained by continuous casting 3,820 N/A 3,820 4,202 4,584 4,966   7218 99 19 Semi-finished products of stainless steel, of square cross-section, forged 3,070 N/A 3,070 3,377 3,684 3,991   7218 99 20 Semi-finished products of stainless steel, of circular cross-section or of cross-section other than square or rectangular, rolled or obtained by continuous casting 3,820 N/A 3,820 4,202 4,584 4,966   7218 99 80 Semi-finished products of stainless steel, forged (excl. products of square or rectangular cross-section) 3,070 N/A 3,070 3,377 3,684 3,991   7219 Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7219 11 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of > 10 mm 3,820 N/A 3,820 4,202 4,584 4,966   7219 12 Flat-rolled products of stainless steel, of a width of>= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 4,7 mm and <= 10 mm 3,820 N/A 3,820 4,202 4,584 4,966   7219 13 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 3 mm and < 4,75 mm 3,820 N/A 3,820 4,202 4,584 4,966   7219 14 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of < 3 mm 3,820 N/A 3,820 4,202 4,584 4,966   7219 21 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of > 10 mm 3,820 N/A 3,820 4,202 4,584 4,966   7219 22 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 4,75 mm and <= 10 mm 3,820 N/A 3,820 4,202 4,584 4,966   7219 23 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 3 mm and < 4,75 mm 3,820 N/A 3,820 4,202 4,584 4,966   7219 24 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of < 3 mm 3,820 N/A 3,820 4,202 4,584 4,966   7219 31 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 4,75 mm 4,150 N/A 4,150 4,565 4,980 5,395   7219 32 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 3 mm but < 4,75 mm 4,150 N/A 4,150 4,565 4,980 5,395   7219 33 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of > 1 mm but < 3 mm 4,150 N/A 4,150 4,565 4,980 5,395   7219 34 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 0,5 mm but <= 1 mm 4,150 N/A 4,150 4,565 4,980 5,395   7219 35 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of < 0,5 mm 4,150 N/A 4,150 4,565 4,980 5,395   7219 90 Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked 4,150 N/A 4,150 4,565 4,980 5,395   7220 Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7220 11 00 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of >= 4,75 mm 3,820 N/A 3,820 4,202 4,584 4,966   7220 12 00 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of < 4,75 mm 3,820 N/A 3,820 4,202 4,584 4,966   7220 20 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" 4,150 N/A 4,150 4,565 4,980 5,395   7220 90 Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked 4,150 N/A 4,150 4,565 4,980 5,395   7221 Bars and rods of stainless steel, hot-rolled, in irregularly wound coils 3,080 N/A 3,080 3,388 3,696 4,004   7222 Other bars and rods of stainless steel; angles, shapes and sections of stainless steel, n.e.s. see below see below see below see below see below see below   7222 11 Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only hot-extruded, of circular cross-section 3,080 N/A 3,080 3,388 3,696 4,004   7222 19 Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only extruded (excl. of circular cross-section) 3,080 N/A 3,080 3,388 3,696 4,004   7222 20 Other bars and rods of stainless steel, not further worked than cold-formed or cold-finished 3,080 N/A 3,080 3,388 3,696 4,004   7222 30 Other bars and rods of stainless steel, cold-formed or cold-finished and further worked, or not further worked than forged, or forged, or hot-formed by other means and further worked, n.e.s. 3,070 N/A 3,070 3,377 3,684 3,991   7222 40 Angles, shapes and sections of stainless steel, n.e.s. 3,080 N/A 3,080 3,388 3,696 4,004   7223 Wire of stainless steel, in coils (excl. bars and rods) see below see below see below see below see below see below   7223 00 Wire of stainless steel, in coils (excl. bars and rods) 3,080 N/A 3,080 3,388 3,696 4,004   7224 Steel, alloy, other than stainless, in ingots or other primary forms, semi-finished products of alloy steel other than stainless (excl. waste and scrap in ingot form, and products obtained by continuous casting) see below see below see below see below see below see below   7224 10 Steel, alloy, other than stainless, in ingots or other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) 3,430 N/A 3,430 3,773 4,116 4,459 (F) 7224 90 02 Semi-finished products of tool steel 4,180 N/A 4,180 4,598 5,016 5,434 (F) 7224 90 03 Semi-finished products of high-speed steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting the width measuring < twice the thickness 4,180 N/A 4,180 4,598 5,016 5,434 (F) 7224 90 05 Semi-finished products of steel containing by weight <= 0,7% of carbon, 0,5% to 1,2% of manganese, 0,6% to 2,3% of silicon, or of steel containing by weight >= 0,0008% of boron with any other element < the minimum content referred to in Note 1 f to chapter 72, of square or rectangular cross-section, hot rolled or obtained by continuous casting, the width measuring < twice the thickness 4,180 N/A 4,180 4,598 5,016 5,434 (F) 7224 90 07 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring < twice the thickness (excl. of tool steel, high-speed steel and articles of subheading 7224.90.05) 4,180 N/A 4,180 4,598 5,016 5,434 (F) 7224 90 14 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring >= twice the thickness (excl. of tool steel) 4,180 N/A 4,180 4,598 5,016 5,434 (F) 7224 90 18 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, forged (excl. of tool steel) 3,430 N/A 3,430 3,773 4,116 4,459 (F) 7224 90 31 Semi-finished products of steel containing by weight 0,9% to 1,15% carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting 4,180 N/A 4,180 4,598 5,016 5,434 (F) 7224 90 38 Semi-finished products of alloy steel, other than stainless steel, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting (excl. of tool steel and products containing by weight 0,9% to 1,15% of carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum) 4,180 N/A 4,180 4,598 5,016 5,434 (F) 7224 90 90 Semi-finished products of alloy steel, other than stainless steel, forged (excl. of tool steel and products of square or rectangular, circular or polygamol cross-section) 3,430 N/A 3,430 3,773 4,116 4,459 (F) 7225 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7225 11 00 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, grain-oriented 5,300 N/A 5,300 5,830 6,360 6,890 (C) 7225 19 10 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, hot-rolled 4,180 N/A 4,180 4,598 5,016 5,434 (C) 7225 19 90 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, cold-rolled "cold-reduced", non-grain-oriented 4,520 N/A 4,520 4,972 5,424 5,876 (F) 7225 30 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, in coils (excl. products of silicon-electrical steel) 4,180 N/A 4,180 4,598 5,016 5,434 (F) 7225 40 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, not in coils (excl. products of silicon-electrical steel) 4,180 N/A 4,180 4,598 5,016 5,434 (F) 7225 50 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of silicon-electrical steel) 4,520 N/A 4,520 4,972 5,424 5,876 (F) 7225 91 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and electrolytically plated or coated with zinc (excl. products of silicon-electrical steel) 4,520 N/A 4,520 4,972 5,424 5,876 (F) 7225 92 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and plated or coated with zinc (excl. electrolytically plated or coated and products of silicon-electrical steel) 4,520 N/A 4,520 4,972 5,424 5,876 (F) 7225 99 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. plated or coated with zinc and products of silicon-electrical steel) 4,520 N/A 4,520 4,972 5,424 5,876 (F) 7226 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7226 11 00 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", grain-oriented 5,300 N/A 5,300 5,830 6,360 6,890 (C) 7226 19 10 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, not further worked than hot-rolled 4,180 N/A 4,180 4,598 5,016 5,434 (C) 7226 19 80 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, cold-rolled "cold-reduced", whether or not further worked, or hot-rolled and further worked, non-grain-oriented 4,520 N/A 4,520 4,972 5,424 5,876 (F) 7226 20 00 Flat-rolled products of high-speed steel, of a width of <= 600 mm, hot-rolled or cold-rolled "cold-reduced" 4,180 N/A 4,180 4,598 5,016 5,434 (F) 7226 91 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than hot-rolled (excl. products of high-speed steel or silicon-electrical steel) 4,180 N/A 4,180 4,598 5,016 5,434 (F) 7226 92 00 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of high-speed steel or silicon-electrical steel) 4,520 N/A 4,520 4,972 5,424 5,876 (F) 7226 99 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. products of high-speed steel or silicon-electrical steel) 4,520 N/A 4,520 4,972 5,424 5,876 (F) 7227 Bars and rods of alloy steel other than stainless, hot-rolled, in irregularly wound coils 3,440 N/A 3,440 3,784 4,128 4,472 (C)/(F) 7228 Other bars and rods of alloy steel other than stainless, angles, shapes and sections of alloy steel other than stainless, n.e.s.; hollow drill bars and rods, of alloy or non-alloy steel see below see below see below see below see below see below   7228 10 20 Bars and rods of high-speed steel, not further worked than hot-rolled, hot-drawn or extruded, and hot-rolled, hot-drawn or extruded, not further worked than clad (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,440 N/A 3,440 3,784 4,128 4,472 (F) 7228 10 50 Bars and rods of high-speed steel, forged (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,430 N/A 3,430 3,773 4,116 4,459 (F) 7228 10 90 Bars and rods of high-speed steel, not further worked than cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked (excl. forged products, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,440 N/A 3,440 3,784 4,128 4,472 (F) 7228 20 Bars and rods of silico-manganese steel (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,440 N/A 3,440 3,784 4,128 4,472 (F) 7228 30 Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,440 N/A 3,440 3,784 4,128 4,472 (C)/(F) 7228 40 Bars and rods of alloy steel other than stainless, not further worked than forged (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,430 N/A 3,430 3,773 4,116 4,459 (F) 7228 50 Bars and rods of alloy steel other than stainless, not further worked than cold-formed or cold-finished (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,440 N/A 3,440 3,784 4,128 4,472 (C)/(F) 7228 60 Bars and rods of alloy steel other than stainless, cold-formed or cold-finished and further worked or hot-formed and further worked, n.e.s. (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,440 N/A 3,440 3,784 4,128 4,472 (F) 7228 70 Angles, shapes and sections of alloy steel other than stainless, n.e.s. 3,440 N/A 3,440 3,784 4,128 4,472 (F) 7228 80 00 Hollow drill bars and rods, of alloy or non-alloy steel 3,440 N/A 3,440 3,784 4,128 4,472 (F) 7229 Wire of alloy steel other than stainless, in coils (excl. bars and rods) 3,440 N/A 3,440 3,784 4,128 4,472 (C)/(F) 7301 Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel 2,890 N/A 2,890 3,179 3,468 3,757 (C) 7302 Railway or tramway track construction material of iron or steel, the following : rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers "cross-ties", fish-plates, chairs, chair wedges, sole plates "base plates", rail clips, bedplates, ties and other material specialised for jointing or fixing rails 2,730 N/A 2,730 3,003 3,276 3,549 (C) 7303 Tubes, pipes and hollow profiles, of cast iron see below see below see below see below see below see below   7303 00 Tubes, pipes and hollow profiles, of cast iron 1,950 N/A 1,950 2,145 2,340 2,535   7304 Tubes, pipes and hollow profiles, seamless, of iron or steel (excl. products of cast iron) see below see below see below see below see below see below   7304 11 00 Line pipe of a kind used for oil or gas pipelines, seamless, of stainless steel 3,080 N/A 3,080 3,388 3,696 4,004   7304 19 Line pipe of a kind used for oil or gas pipelines, seamless, of iron or steel (excl. products of stainless steel or of cast iron) 2,110 N/A 2,110 2,321 2,532 2,743 (C) 7304 22 00 Drill pipe, seamless, of stainless steel, of a kind used in drilling for oil or gas 3,080 N/A 3,080 3,388 3,696 4,004   7304 23 00 Drill pipe, seamless, of a kind used in drilling for oil or gas, of iron or steel (excl. products of stainless steel or of cast iron) 2,110 N/A 2,110 2,321 2,532 2,743 (C) 7304 24 00 Casing and tubing, seamless, of a kind used for drilling for oil or gas, of stainless steel 3,080 N/A 3,080 3,388 3,696 4,004   7304 29 Casing and tubing, seamless, of iron or steel, of a kind used in drilling for oil or gas (excl. products of cast iron) 2,110 N/A 2,110 2,321 2,532 2,743 (C) 7304 31 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" (excl. cast iron products and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used for drilling for oil or gas) 2,110 N/A 2,110 2,321 2,532 2,743 (C) 7304 39 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, not cold-drawn or cold-rolled "cold-reduced" (excl. cast iron products, line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas) 2,110 N/A 2,110 2,321 2,532 2,743 (C) 7304 41 00 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas) 3,080 N/A 3,080 3,388 3,696 4,004   7304 49 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines or of a kind used for drilling for oil or gas) 3,080 N/A 3,080 3,388 3,696 4,004   7304 51 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil) 2,050 N/A 2,050 2,255 2,460 2,665 (F) 7304 59 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil) 2,050 N/A 2,050 2,255 2,460 2,665 (C)/(F) 7304 90 00 Tubes, pipes and hollow profiles, seamless, of non-circular cross-section, of iron or steel (excl. products of cast iron) 2,110 N/A 2,110 2,321 2,532 2,743 (C) 7305 Tubes and pipes, having circular cross-sections and an external diameter of > 406,4 mm, of flat-rolled products of iron or steel "e.g., welded, riveted or similarly closed" 2,890 N/A 2,890 3,179 3,468 3,757 (C) 7306 Tubes, pipes and hollow profiles "e.g., open seam or welded, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless tubes and pipes and tubes having internal and external circular cross-sections and an external diameter of > 406,4 mm) see below see below see below see below see below see below   7306 11 00 Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm 4,150 N/A 4,150 4,565 4,980 5,395   7306 19 00 Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron) 2,890 N/A 2,890 3,179 3,468 3,757 (C) 7306 21 00 Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm 4,150 N/A 4,150 4,565 4,980 5,395   7306 29 00 Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron) 2,890 N/A 2,890 3,179 3,468 3,757 (C) 7306 30 12 Precision tubes, welded, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" 2,890 N/A 2,890 3,179 3,468 3,757 (C) 7306 30 18 Precision tubes, welded, of circular cross-section, of iron or non-alloy steel (excl. cold-drawn or cold-rolled) 2,560 N/A 2,560 2,816 3,072 3,328   7306 30 41 Threaded or threadable tubes "gas pipe", welded, of circular cross-section, of iron or non-alloy steel, plated or coated with zinc 2,890 N/A 2,890 3,179 3,468 3,757 (C) 7306 30 49 Threaded or threadable tubes "gas pipe", welded, of circular cross-section, of iron or non-alloy steel (excl. products plated or coated with zinc) 2,890 N/A 2,890 3,179 3,468 3,757 (C) 7306 30 72 Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel, of an external diameter of <= 168,3 mm, plated or coated with zinc (excl. line pipe of a kind used for oil or gas pipelines or casing and tubingof a kind used in drilling for oil or gas) 2,890 N/A 2,890 3,179 3,468 3,757 (C) 7306 30 77 Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel of an external diameter of <= 168,3 mm (excl. plated or coated with zinc and line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used in drilling for oil or gas, precision tubes and threaded or threadable tubes "gas pipe") 2,890 N/A 2,890 3,179 3,468 3,757 (C) 7306 30 80 Tubes, pipes and hollow profiles, welded, having a circular cross-section, of iron or steel, of an external diameter of > 168,3 mm but <= 406,4 mm (excl. line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, or precision steel tubes, electrical conduit tubes or threaded or threadable tubes "gas pipe") 2,890 N/A 2,890 3,179 3,468 3,757 (C) 7306 40 20 Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. products having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) 4,150 N/A 4,150 4,565 4,980 5,395   7306 40 80 Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel (excl. products cold-drawn or cold-rolled "cold-reduced", tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) 3,820 N/A 3,820 4,202 4,584 4,966   7306 50 21 Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" 3,120 N/A 3,120 3,432 3,744 4,056 (F) 7306 50 29 Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless (excl. cold-drawn or cold-rolled) 2,790 N/A 2,790 3,069 3,348 3,627 (F) 7306 50 80 Tubes, pipes and hollow profiles, welded, of circular cross-section, of alloy steel other than stainless (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and precision steel tubes) 3,120 N/A 3,120 3,432 3,744 4,056 (F) 7306 61 10 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel 4,150 N/A 4,150 4,565 4,980 5,395   7306 61 92 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of <= 2 mm 2,890 N/A 2,890 3,179 3,468 3,757 (C) 7306 61 99 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of > 2 mm 2,890 N/A 2,890 3,179 3,468 3,757 (C) 7306 69 10 Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) 4,150 N/A 4,150 4,565 4,980 5,395   7306 69 90 Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of iron or steel other than stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) 2,890 N/A 2,890 3,179 3,468 3,757 (C) 7306 90 00 Tubes, pipes and hollow profiles "e.g., open seam, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless or welded tubes and pipes and tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm) 2,890 N/A 2,890 3,179 3,468 3,757 (C) 7307 Tube or pipe fittings "e.g. couplings, elbows, sleeves", of iron or steel see below see below see below see below see below see below   7307 11 Tube or pipe fittings of non-malleable cast iron 1,940 N/A 1,940 2,134 2,328 2,522   7307 19 10 Tube or pipe fittings of cast iron (excl. of non-malleable) 1,940 N/A 1,940 2,134 2,328 2,522   7307 19 90 Cast tube or pipe fittings of steel 2,100 N/A 2,100 2,310 2,520 2,730 (C) 7307 21 00 Flanges of stainless steel (excl. cast products) 2,730 N/A 2,730 3,003 3,276 3,549   7307 22 Threaded elbows, bends and sleeves of stainless steel (excl. cast products) 2,730 N/A 2,730 3,003 3,276 3,549   7307 23 Butt welding tube or pipe fittings of stainless steel (excl. cast products) 2,730 N/A 2,730 3,003 3,276 3,549   7307 29 Tube or pipe fittings of stainless steel (excl. cast products, flanges, threaded elbows, bends and sleeves and butt weldings fittings) 2,730 N/A 2,730 3,003 3,276 3,549   7307 91 00 Flanges of iron or steel (excl. cast or stainless products) 2,110 N/A 2,110 2,321 2,532 2,743 (C) 7307 92 Threaded elbows, bends and sleeves, of stainless steel (excl. cast or stainless products) 2,110 N/A 2,110 2,321 2,532 2,743 (C) 7307 93 Butt welding fittings of iron or steel (excl. cast iron or stainless steel products, and flanges) 2,110 N/A 2,110 2,321 2,532 2,743 (C) 7307 99 Tube or pipe fittings, of iron or steel (excl. cast iron or stainless steel products; flanges; threaded elbows, bends and sleeves; butt welding fittings) 2,110 N/A 2,110 2,321 2,532 2,743 (C) 7308 Structures and parts of structures "e.g., bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns", of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel (excl. prefabricated buildings of heading 9406) 3,580 N/A 3,580 3,938 4,296 4,654 (C) 7309 Reservoirs, tanks, vats and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of > 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated (excl. containers specifically constructed or equipped for one or more types of transport) 3,760 N/A 3,760 4,136 4,512 4,888 (C) 7310 Tanks, casks, drums, cans, boxes and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of <= 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated, n.e.s. 2,890 N/A 2,890 3,179 3,468 3,757 (C) 7311 Containers of iron or steel, for compressed or liquefied gas (excl. containers specifically constructed or equipped for one or more types of transport) see below see below see below see below see below see below   7311 00 Containers of iron or steel, for compressed or liquefied gas (excl. containers specifically constructed or equipped for one or more types of transport) 2,990 N/A 2,990 3,289 3,588 3,887 (C) 7318 Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers, incl. spring washers, and similar articles, of iron or steel (excl. lag screws, stoppers, plugs and the like, threaded) see below see below see below see below see below see below   7318 11 00 Coach screws of iron or steel 2,110 N/A 2,110 2,321 2,532 2,743 (C) 7318 12 10 Wood screws of stainless steel (excl. coach screws) 3,080 N/A 3,080 3,388 3,696 4,004 (C) 7318 12 90 Wood screws of iron or steel other than stainless (excl. coach screws) 2,110 N/A 2,110 2,321 2,532 2,743 (C) 7318 13 00 Screw hooks and screw rings, of iron or steel 2,110 N/A 2,110 2,321 2,532 2,743 (C) 7318 14 10 Self-tapping screws, of stainless steel (excl. wood screws) 3,080 N/A 3,080 3,388 3,696 4,004 (C) 7318 14 91 Spaced-thread screws of iron or steel other than stainless 2,110 N/A 2,110 2,321 2,532 2,743 (C) 7318 14 99 Self-tapping screws of iron or steel other than stainless (excl. spaced-thread screws and wood screws) 2,110 N/A 2,110 2,321 2,532 2,743 (C) 7318 15 Threaded screws and bolts, of iron or steel, whether or not with their nuts and washers (excl. coach screws and other wood screws, screw hooks and screw rings, self-tapping screws, lag screws, stoppers, plugs and the like, threaded) 2,680 N/A 2,680 2,948 3,216 3,484 (C) 7318 16 Nuts of iron or steel 2,950 N/A 2,950 3,245 3,540 3,835 (C) 7318 19 00 Threaded articles, of iron or steel, n.e.s. 2,110 N/A 2,110 2,321 2,532 2,743 (C) 7318 21 00 Spring washers and other lock washers, of iron or steel 2,110 N/A 2,110 2,321 2,532 2,743 (C) 7318 22 00 Washers of iron or steel (excl. spring washers and other lock washers) 2,210 N/A 2,210 2,431 2,652 2,873 (C) 7318 23 00 Rivets of iron or steel (excl. tubular and bifurcated rivets for particular uses) 2,160 N/A 2,160 2,376 2,592 2,808 (C) 7318 24 00 Cotters and cotter pins, of iron or steel 2,110 N/A 2,110 2,321 2,532 2,743 (C) 7318 29 00 Non-threaded articles, of iron or steel 2,110 N/A 2,110 2,321 2,532 2,743 (C) 7326 Articles of iron or steel, n.e.s. (excl. cast articles) see below see below see below see below see below see below   7326 11 00 Grinding balls and similar articles for mills, of iron or steel, forged or stamped, but not further worked 2,100 N/A 2,100 2,310 2,520 2,730 (C) 7326 19 Articles of iron or steel, forged or stamped, but not further worked, n.e.s. (excl. grinding balls and similar articles for mills) 2,100 N/A 2,100 2,310 2,520 2,730 (C) 7326 20 00 Articles of iron or steel wire, n.e.s. 2,110 N/A 2,110 2,321 2,532 2,743 (C) 7326 90 30 Ladders and steps, of iron or steel 2,110 N/A 2,110 2,321 2,532 2,743 (C) 7326 90 40 Pallets and similar platforms for handling goods, of iron or steel 2,110 N/A 2,110 2,321 2,532 2,743 (C) 7326 90 50 Reels for cables, piping and the like, of iron or steel 2,110 N/A 2,110 2,321 2,532 2,743 (C) 7326 90 60 Ventilators, non-mechanical, guttering, hooks and like articles used in the building industry, n.e.s., of iron or steel 2,110 N/A 2,110 2,321 2,532 2,743 (C) 7326 90 92 Articles of iron or steel, open-die forged, n.e.s. 2,100 N/A 2,100 2,310 2,520 2,730 (C) 7326 90 94 Articles of iron or steel, closed-die forged, n.e.s. 2,100 N/A 2,100 2,310 2,520 2,730 (C) 7326 90 96 Sintered articles of iron or steel, n.e.s. 2,100 N/A 2,100 2,310 2,520 2,730 (C) 7326 90 98 Articles of iron or steel, n.e.s. 2,890 N/A 2,890 3,179 3,468 3,757 (C) Congo Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – _ _ _   2523 10 00 White clinker – – – _ _ _   2523 10 00 Grey clinker 0,850 0,040 0,890 0,979 1,068 1,157 (A) 2523 21 00 White Portland cement – – – _ _ _   2523 29 00 Grey Portland cement 0,850 0,070 0,930 1,023 1,116 1,209   2523 90 00 White hydraulic cements – – – _ _ _   2523 90 00 Grey hydraulic cements 0,820 0,070 0,890 0,979 1,068 1,157 (A) 2523 30 00 Aluminous cement – – – _ _ _   Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N.A. 10,820 11,902 12,984 14,066   Costa Rica Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – _ _ _   2523 10 00 White clinker – – – _ _ _   2523 10 00 Grey clinker 0,850 0 0,850 0,935 1,020 1,105 (A) 2523 21 00 White Portland cement – – – _ _ _   2523 29 00 Grey Portland cement 0,850 0 0,860 0,946 1,032 1,118   2523 90 00 White hydraulic cements – – – _ _ _   2523 90 00 Grey hydraulic cements 0,810 0,010 0,820 0,902 0,984 1,066 (A) 2523 30 00 Aluminous cement – – – _ _ _   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 1,820 0,030 1,850 1,869 1,869 1,869   2814 10 00 Anhydrous ammonia – – – _ _ _   2814 20 00 Ammonia in aqueous solution 0,680 0,030 0,710 0,717 0,717 0,717   2834 21 00 Nitrate of potassium 1,630 0,050 1,670 1,687 1,687 1,687   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,510 0,030 0,530 0,535 0,535 0,535   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,840 0,030 0,870 0,879 0,879 0,879   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,530 0,080 1,610 1,626 1,626 1,626   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,500 0,080 1,570 1,586 1,586 1,586   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,660 0,060 0,720 0,727 0,727 0,727   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,160 0,060 1,230 1,242 1,242 1,242   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,240 0,050 1,290 1,303 1,303 1,303   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,900 0,070 1,980 2 2 2   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,650 0,070 1,710 1,727 1,727 1,727   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,650 0,070 1,710 1,727 1,727 1,727   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,840 0,050 2,890 2,919 2,919 2,919   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,600 0,060 1,660 1,677 1,677 1,677   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,340 0,060 1,400 1,414 1,414 1,414   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,470 0,070 1,550 1,566 1,566 1,566   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,690 0,060 0,750 0,758 0,758 0,758   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,830 0,070 0,900 0,909 0,909 0,909   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,570 0,050 0,620 0,626 0,626 0,626   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,530 0,040 0,570 0,576 0,576 0,576   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,340 0,030 0,370 0,374 0,374 0,374   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,130 0,080 1,210 1,222 1,222 1,222   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,610 0,080 0,690 0,697 0,697 0,697   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,100 0,050 1,150 1,162 1,162 1,162   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,560 0,040 0,600 0,606 0,606 0,606   Aluminium         10 % mark-up 20 % mark-up 30 % mark-up   7601 Unwrought aluminium 0,360 N/A 0,360 0,396 0,432 0,468 (L) 7603 Aluminium powders and flakes 1,410 N/A 1,410 1,551 1,692 1,833 (L) 7604 10 10 Bars and rods 1,630 N/A 1,630 1,793 1,956 2,119 (L) 7604 10 90 Profiles 1,650 N/A 1,650 1,815 1,980 2,145 (L) 7604 21 00 Hollow profiles 1,650 N/A 1,650 1,815 1,980 2,145 (L) 7604 29 10 Bars and rods 1,630 N/A 1,630 1,793 1,956 2,119 (L) 7604 29 90 Profiles 1,650 N/A 1,650 1,815 1,980 2,145 (L) 7605 Aluminium wire 1,630 N/A 1,630 1,793 1,956 2,119 (L) 7606 Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm 2,090 N/A 2,090 2,299 2,508 2,717 (L) 7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm 2,090 N/A 2,090 2,299 2,508 2,717 (L) 7608 Aluminium tubes and pipes 1,650 N/A 1,650 1,815 1,980 2,145 (L) 7609 00 00 Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) 1,650 N/A 1,650 1,815 1,980 2,145 (L) 7610 10 00 Doors, windows and their frames and thresholds for doors 1,650 N/A 1,650 1,815 1,980 2,145 (L) 7610 90 Other 1,650 N/A 1,650 1,815 1,980 2,145 (L) 7610 90 10 Bridges and bridge-sections, towers and lattice masts 1,650 N/A 1,650 1,815 1,980 2,145 (L) 7610 90 90 Other 1,650 N/A 1,650 1,815 1,980 2,145 (L) 7611 00 00 Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 2,090 N/A 2,090 2,299 2,508 2,717 (L) 7612 Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 2,090 N/A 2,090 2,299 2,508 2,717 (L) 7613 00 00 Aluminium containers for compressed or liquefied gas 2,090 N/A 2,090 2,299 2,508 2,717 (L) 7614 Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated 1,630 N/A 1,630 1,793 1,956 2,119 (L) 7616 10 00 Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles 2,090 N/A 2,090 2,299 2,508 2,717 (L) 7616 91 00 Cloth, grill, netting and fencing, of aluminium wire 2,090 N/A 2,090 2,299 2,508 2,717 (L) 7616 99 10 Cast 1,410 N/A 1,410 1,551 1,692 1,833 (L) 7616 99 90 Other 2,090 N/A 2,090 2,299 2,508 2,717 (L) Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066   Côte d'Ivoire Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – _ _ _   2523 10 00 White clinker – – – _ _ _   2523 10 00 Grey clinker – – – _ _ _   2523 21 00 White Portland cement – – – _ _ _   2523 29 00 Grey Portland cement 1,130 0,050 1,180 1,298 1,416 1,534   2523 90 00 White hydraulic cements – – – _ _ _   2523 90 00 Grey hydraulic cements – – – _ _ _   2523 30 00 Aluminous cement – – – _ _ _   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 1,760 0,050 1,800 1,818 1,818 1,818   2814 10 00 Anhydrous ammonia – – – _ _ _   2814 20 00 Ammonia in aqueous solution 0,670 0,040 0,710 0,717 0,717 0,717   2834 21 00 Nitrate of potassium 1,580 0,060 1,640 1,656 1,656 1,656   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,500 0,030 0,540 0,545 0,545 0,545   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,830 0,030 0,860 0,869 0,869 0,869   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,510 0,100 1,610 1,626 1,626 1,626   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,480 0,100 1,580 1,596 1,596 1,596   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,650 0,070 0,720 0,727 0,727 0,727   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,140 0,080 1,210 1,222 1,222 1,222   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,200 0,060 1,260 1,273 1,273 1,273   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,850 0,090 1,940 1,959 1,959 1,959   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,600 0,080 1,680 1,697 1,697 1,697   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,600 0,080 1,680 1,697 1,697 1,697   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,740 0,070 2,810 2,838 2,838 2,838   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,550 0,080 1,630 1,646 1,646 1,646   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,300 0,080 1,380 1,394 1,394 1,394   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,440 0,090 1,540 1,555 1,555 1,555   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,680 0,070 0,750 0,758 0,758 0,758   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,810 0,080 0,890 0,899 0,899 0,899   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,550 0,060 0,610 0,616 0,616 0,616   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,520 0,050 0,580 0,586 0,586 0,586   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,330 0,040 0,370 0,374 0,374 0,374   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,100 0,100 1,200 1,212 1,212 1,212   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,600 0,090 0,700 0,707 0,707 0,707   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,060 0,060 1,130 1,141 1,141 1,141   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,550 0,040 0,590 0,596 0,596 0,596   Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066   Cuba Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – _ _ _   2523 10 00 White clinker 1,320 0,070 1,400 1,540 1,680 1,820 (B) 2523 10 00 Grey clinker 1,090 0,050 1,140 1,254 1,368 1,482 (A) 2523 21 00 White Portland cement 1,320 0,160 1,480 1,628 1,776 1,924   2523 29 00 Grey Portland cement 1,090 0,090 1,180 1,298 1,416 1,534   2523 90 00 White hydraulic cements – – – _ _ _   2523 90 00 Grey hydraulic cements – – – _ _ _   2523 30 00 Aluminous cement – – – _ _ _   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 1,820 0,060 1,880 1,899 1,899 1,899   2814 10 00 Anhydrous ammonia – – – _ _ _   2814 20 00 Ammonia in aqueous solution 0,680 0,060 0,740 0,747 0,747 0,747   2834 21 00 Nitrate of potassium 1,620 0,090 1,710 1,727 1,727 1,727   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,490 0,050 0,530 0,535 0,535 0,535   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,810 0,050 0,850 0,859 0,859 0,859   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,460 0,140 1,600 1,616 1,616 1,616   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,430 0,140 1,570 1,586 1,586 1,586   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,650 0,100 0,750 0,758 0,758 0,758   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,150 0,120 1,260 1,273 1,273 1,273   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,230 0,090 1,320 1,333 1,333 1,333   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,890 0,140 2,030 2,050 2,050 2,050   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,620 0,120 1,750 1,768 1,768 1,768   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,620 0,120 1,750 1,768 1,768 1,768   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,840 0,090 2,940 2,969 2,969 2,969   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,590 0,120 1,710 1,727 1,727 1,727   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,310 0,110 1,420 1,434 1,434 1,434   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,430 0,130 1,560 1,576 1,576 1,576   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,680 0,100 0,790 0,798 0,798 0,798   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,820 0,120 0,940 0,949 0,949 0,949   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,560 0,090 0,650 0,657 0,657 0,657   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,530 0,080 0,600 0,606 0,606 0,606   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,330 0,060 0,400 0,404 0,404 0,404   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,110 0,150 1,270 1,283 1,283 1,283   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,600 0,120 0,720 0,727 0,727 0,727   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,090 0,090 1,180 1,192 1,192 1,192   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,560 0,060 0,620 0,626 0,626 0,626   Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066   Curaçao Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066   Democratic Republic of the Congo Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – _ _ _   2523 10 00 White clinker – – – _ _ _   2523 10 00 Grey clinker 1,240 0 1,250 1,375 1,500 1,625 (A) 2523 21 00 White Portland cement – – – _ _ _   2523 29 00 Grey Portland cement 1,240 0,010 1,250 1,375 1,500 1,625   2523 90 00 White hydraulic cements – – – _ _ _   2523 90 00 Grey hydraulic cements – – – _ _ _   2523 30 00 Aluminous cement – – – _ _ _   Dominican Republic Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – _ _ _   2523 10 00 White clinker – – – _ _ _   2523 10 00 Grey clinker 1,030 0,050 1,070 1,177 1,284 1,391 (A) 2523 21 00 White Portland cement 1,210 0,150 1,360 1,496 1,632 1,768   2523 29 00 Grey Portland cement 1,040 0,080 1,120 1,232 1,344 1,456   2523 90 00 White hydraulic cements 1,260 0,190 1,450 1,595 1,740 1,885 (B) 2523 90 00 Grey hydraulic cements 0,990 0,080 1,070 1,177 1,284 1,391 (A) 2523 30 00 Aluminous cement – – – _ _ _   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 1,800 0,050 1,850 1,869 1,869 1,869   2814 10 00 Anhydrous ammonia – – – _ _ _   2814 20 00 Ammonia in aqueous solution 0,680 0,050 0,730 0,737 0,737 0,737   2834 21 00 Nitrate of potassium 1,610 0,080 1,690 1,707 1,707 1,707   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,510 0,040 0,550 0,556 0,556 0,556   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,840 0,040 0,880 0,889 0,889 0,889   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,530 0,120 1,650 1,667 1,667 1,667   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,500 0,120 1,620 1,636 1,636 1,636   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,660 0,090 0,750 0,758 0,758 0,758   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,160 0,100 1,260 1,273 1,273 1,273   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,230 0,080 1,300 1,313 1,313 1,313   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,880 0,120 2 2,020 2,020 2,020   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,630 0,110 1,740 1,757 1,757 1,757   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,630 0,110 1,740 1,757 1,757 1,757   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,800 0,080 2,880 2,909 2,909 2,909   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,580 0,110 1,690 1,707 1,707 1,707   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,330 0,100 1,420 1,434 1,434 1,434   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,470 0,110 1,580 1,596 1,596 1,596   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,690 0,090 0,780 0,788 0,788 0,788   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,820 0,110 0,930 0,939 0,939 0,939   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,560 0,080 0,640 0,646 0,646 0,646   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,530 0,070 0,600 0,606 0,606 0,606   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,340 0,050 0,390 0,394 0,394 0,394   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,120 0,140 1,260 1,273 1,273 1,273   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,610 0,110 0,720 0,727 0,727 0,727   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,080 0,080 1,170 1,182 1,182 1,182   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,560 0,060 0,620 0,626 0,626 0,626   Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066   Iron and steel         10 % mark-up 20 % mark-up 30 % mark-up   7202 60 00 Ferro-nickel 3,480 N/A 3,480 3,828 4,176 4,524 N/A Ecuador Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – _ _ _   2523 10 00 White clinker – – – _ _ _   2523 10 00 Grey clinker 1,090 0,010 1,110 1,221 1,332 1,443 (A) 2523 21 00 White Portland cement – – – _ _ _   2523 29 00 Grey Portland cement 1,090 0,020 1,110 1,221 1,332 1,443   2523 90 00 White hydraulic cements – – – _ _ _   2523 90 00 Grey hydraulic cements 1,040 0,030 1,070 1,177 1,284 1,391 (A) 2523 30 00 Aluminous cement – – – _ _ _   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 1,880 0,020 1,910 1,929 1,929 1,929   2814 10 00 Anhydrous ammonia – – – _ _ _   2814 20 00 Ammonia in aqueous solution 0,680 0,020 0,700 0,707 0,707 0,707   2834 21 00 Nitrate of potassium 1,670 0,040 1,700 1,717 1,717 1,717   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,510 0,020 0,530 0,535 0,535 0,535   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,840 0,020 0,860 0,869 0,869 0,869   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,530 0,060 1,590 1,606 1,606 1,606   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,500 0,060 1,560 1,576 1,576 1,576   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,660 0,050 0,710 0,717 0,717 0,717   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,180 0,060 1,240 1,252 1,252 1,252   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,270 0,040 1,310 1,323 1,323 1,323   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,950 0,060 2,010 2,030 2,030 2,030   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,680 0,060 1,740 1,757 1,757 1,757   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,680 0,060 1,740 1,757 1,757 1,757   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,940 0,040 2,980 3,010 3,010 3,010   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,640 0,060 1,690 1,707 1,707 1,707   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,360 0,050 1,410 1,424 1,424 1,424   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,490 0,060 1,550 1,566 1,566 1,566   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,700 0,050 0,750 0,758 0,758 0,758   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,850 0,060 0,910 0,919 0,919 0,919   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,580 0,050 0,620 0,626 0,626 0,626   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,530 0,040 0,570 0,576 0,576 0,576   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,340 0,030 0,370 0,374 0,374 0,374   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,160 0,080 1,230 1,242 1,242 1,242   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,610 0,080 0,690 0,697 0,697 0,697   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,120 0,040 1,160 1,172 1,172 1,172   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,580 0,030 0,610 0,616 0,616 0,616   Aluminium         10 % mark-up 20 % mark-up 30 % mark-up   7601 Unwrought aluminium 0,360 N/A 0,360 0,396 0,432 0,468 (L) 7603 Aluminium powders and flakes 1,970 N/A 1,970 2,167 2,364 2,561 (L) 7604 10 10 Bars and rods 2,190 N/A 2,190 2,409 2,628 2,847 (L) 7604 10 90 Profiles 2,210 N/A 2,210 2,431 2,652 2,873 (L) 7604 21 00 Hollow profiles 2,210 N/A 2,210 2,431 2,652 2,873 (L) 7604 29 10 Bars and rods 2,190 N/A 2,190 2,409 2,628 2,847 (L) 7604 29 90 Profiles 2,210 N/A 2,210 2,431 2,652 2,873 (L) 7605 Aluminium wire 2,190 N/A 2,190 2,409 2,628 2,847 (L) 7606 Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm 2,650 N/A 2,650 2,915 3,180 3,445 (L) 7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm 2,650 N/A 2,650 2,915 3,180 3,445 (L) 7608 Aluminium tubes and pipes 2,210 N/A 2,210 2,431 2,652 2,873 (L) 7609 00 00 Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) 2,210 N/A 2,210 2,431 2,652 2,873 (L) 7610 10 00 Doors, windows and their frames and thresholds for doors 2,210 N/A 2,210 2,431 2,652 2,873 (L) 7610 90 Other 2,210 N/A 2,210 2,431 2,652 2,873 (L) 7610 90 10 Bridges and bridge-sections, towers and lattice masts 2,210 N/A 2,210 2,431 2,652 2,873 (L) 7610 90 90 Other 2,210 N/A 2,210 2,431 2,652 2,873 (L) 7611 00 00 Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 2,650 N/A 2,650 2,915 3,180 3,445 (L) 7612 Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 2,650 N/A 2,650 2,915 3,180 3,445 (L) 7613 00 00 Aluminium containers for compressed or liquefied gas 2,650 N/A 2,650 2,915 3,180 3,445 (L) 7614 Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated 2,190 N/A 2,190 2,409 2,628 2,847 (L) 7616 10 00 Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles 2,650 N/A 2,650 2,915 3,180 3,445 (L) 7616 91 00 Cloth, grill, netting and fencing, of aluminium wire 2,650 N/A 2,650 2,915 3,180 3,445 (L) 7616 99 10 Cast 1,970 N/A 1,970 2,167 2,364 2,561 (L) 7616 99 90 Other 2,650 N/A 2,650 2,915 3,180 3,445 (L) Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/a 10,820 11,902 12,984 14,066   Iron and steel         10 % mark-up 20 % mark-up 30 % mark-up   7202 11 Ferro-manganese, containing by weight > 2% of carbon 1,690 N/A 1,690 1,859 2,028 2,197   Egypt Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – _ _ _   2523 10 00 White clinker 1,290 0,040 1,330 1,463 1,596 1,729 (B) 2523 10 00 Grey clinker 1,240 0,030 1,270 1,397 1,524 1,651 (A) 2523 21 00 White Portland cement 1,250 0,130 1,390 1,529 1,668 1,807   2523 29 00 Grey Portland cement 1,240 0,050 1,290 1,419 1,548 1,677   2523 90 00 White hydraulic cements 1,300 0,160 1,450 1,595 1,740 1,885 (B) 2523 90 00 Grey hydraulic cements 1,180 0,060 1,240 1,364 1,488 1,612 (A) 2523 30 00 Aluminous cement – – – _ _ _   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 2,460 0,030 2,490 2,515 2,515 2,515   2814 10 00 Anhydrous ammonia 1,960 0,100 2,050 2,071 2,071 2,071   2814 20 00 Ammonia in aqueous solution 0,590 0,030 0,620 0,626 0,626 0,626   2834 21 00 Nitrate of potassium 1,990 0,050 2,040 2,060 2,060 2,060   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,440 0,020 0,460 0,465 0,465 0,465   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,720 0,020 0,750 0,758 0,758 0,758   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,320 0,080 1,390 1,404 1,404 1,404   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,290 0,070 1,360 1,374 1,374 1,374   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,570 0,060 0,630 0,636 0,636 0,636   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,280 0,060 1,340 1,353 1,353 1,353   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,510 0,050 1,560 1,576 1,576 1,576   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,320 0,080 2,390 2,414 2,414 2,414   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,980 0,070 2,050 2,071 2,071 2,071   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,980 0,070 2,050 2,071 2,071 2,071   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 3,840 0,050 3,890 3,929 3,929 3,929   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,940 0,070 2,010 2,030 2,030 2,030   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,450 0,060 1,510 1,525 1,525 1,525   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,490 0,070 1,560 1,576 1,576 1,576   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,740 0,060 0,800 0,808 0,808 0,808   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,970 0,070 1,040 1,050 1,050 1,050   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,660 0,050 0,710 0,717 0,717 0,717   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,460 0,040 0,500 0,505 0,505 0,505   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,290 0,040 0,330 0,333 0,333 0,333   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,340 0,090 1,430 1,444 1,444 1,444   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,530 0,080 0,620 0,626 0,626 0,626   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,310 0,050 1,360 1,374 1,374 1,374   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,670 0,040 0,710 0,717 0,717 0,717   Aluminium         10 % mark-up 20 % mark-up 30 % mark-up   7601 Unwrought aluminium 1,870 N/A 1,870 2,057 2,244 2,431 (K) 7603 Aluminium powders and flakes 2,698 N/A 2,698 2,967 3,237 3,507 (K) 7604 10 10 Bars and rods 2,997 N/A 2,997 3,297 3,597 3,896 (K) 7604 10 90 Profiles 3,025 N/A 3,025 3,327 3,629 3,932 (K) 7604 21 00 Hollow profiles 3,025 N/A 3,025 3,327 3,629 3,932 (K) 7604 29 10 Bars and rods 2,997 N/A 2,997 3,297 3,597 3,896 (K) 7604 29 90 Profiles 3,025 N/A 3,025 3,327 3,629 3,932 (K) 7605 Aluminium wire 2,997 N/A 2,997 3,297 3,597 3,896 (K) 7606 Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm 3,624 N/A 3,624 3,986 4,349 4,711 (K) 7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm 3,624 N/A 3,624 3,986 4,349 4,711 (K) 7608 Aluminium tubes and pipes 3,025 N/A 3,025 3,327 3,629 3,932 (K) 7609 00 00 Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) 3,025 N/A 3,025 3,327 3,629 3,932 (K) 7610 10 00 Doors, windows and their frames and thresholds for doors 3,025 N/A 3,025 3,327 3,629 3,932 (K) 7610 90 Other 3,025 N/A 3,025 3,327 3,629 3,932 (K) 7610 90 10 Bridges and bridge-sections, towers and lattice masts 3,025 N/A 3,025 3,327 3,629 3,932 (K) 7610 90 90 Other 3,025 N/A 3,025 3,327 3,629 3,932 (K) 7611 00 00 Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 3,624 N/A 3,624 3,986 4,349 4,711 (K) 7612 Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 3,624 N/A 3,624 3,986 4,349 4,711 (K) 7613 00 00 Aluminium containers for compressed or liquefied gas 3,624 N/A 3,624 3,986 4,349 4,711 (K) 7614 Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated 2,997 N/A 2,997 3,297 3,597 3,896 (K) 7616 10 00 Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles 3,624 N/A 3,624 3,986 4,349 4,711 (K) 7616 91 00 Cloth, grill, netting and fencing, of aluminium wire 3,624 N/A 3,624 3,986 4,349 4,711 (K) 7616 99 10 Cast 2,698 N/A 2,698 2,967 3,237 3,507 (K) 7616 99 90 Other 3,624 N/A 3,624 3,986 4,349 4,711 (K) Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066   Iron and steel         10 % mark-up 20 % mark-up 30 % mark-up   7202 11 Ferro-manganese, containing by weight > 2% of carbon 1,690 N/A 1,690 1,859 2,028 2,197   7202 19 Ferro-manganese, containing by weight <= 2% carbon _ _ _ _ _ _   7202 41 Ferro-chromium, containing by weight > 4% of carbon 2,350 N/A 2,350 2,585 2,820 3,055   7202 49 Ferro-chromium, containing by weight <= 4% of carbon _ _ _ _ _ _   7202 60 00 Ferro-nickel 3,480 N/A 3,480 3,828 4,176 4,524   El Salvador Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – _ _ _   2523 10 00 White clinker – – – _ _ _   2523 10 00 Grey clinker 0,870 0,040 0,910 1,001 1,092 1,183 (A) 2523 21 00 White Portland cement – – – _ _ _   2523 29 00 Grey Portland cement 0,870 0,070 0,940 1,034 1,128 1,222   2523 90 00 White hydraulic cements – – – _ _ _   2523 90 00 Grey hydraulic cements 0,830 0,080 0,910 1,001 1,092 1,183 (A) 2523 30 00 Aluminous cement – – – _ _ _   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 1,820 0,050 1,870 1,889 1,889 1,889   2814 10 00 Anhydrous ammonia – – – _ _ _   2814 20 00 Ammonia in aqueous solution 0,680 0,040 0,730 0,737 0,737 0,737   2834 21 00 Nitrate of potassium 1,620 0,070 1,690 1,707 1,707 1,707   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,490 0,040 0,520 0,525 0,525 0,525   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,800 0,040 0,840 0,848 0,848 0,848   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,460 0,120 1,580 1,596 1,596 1,596   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,430 0,110 1,540 1,555 1,555 1,555   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,650 0,080 0,730 0,737 0,737 0,737   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,150 0,090 1,240 1,252 1,252 1,252   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,230 0,070 1,300 1,313 1,313 1,313   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,890 0,110 2 2,020 2,020 2,020   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,620 0,100 1,720 1,737 1,737 1,737   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,620 0,100 1,720 1,737 1,737 1,737   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,850 0,080 2,920 2,949 2,949 2,949   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,590 0,100 1,680 1,697 1,697 1,697   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,310 0,090 1,400 1,414 1,414 1,414   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,430 0,100 1,540 1,555 1,555 1,555   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,680 0,080 0,770 0,778 0,778 0,778   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,820 0,100 0,920 0,929 0,929 0,929   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,560 0,080 0,630 0,636 0,636 0,636   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,530 0,060 0,590 0,596 0,596 0,596   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,330 0,050 0,380 0,384 0,384 0,384   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,110 0,120 1,240 1,252 1,252 1,252   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,600 0,100 0,700 0,707 0,707 0,707   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,090 0,080 1,160 1,172 1,172 1,172   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,560 0,050 0,610 0,616 0,616 0,616   Aluminium         10 % mark-up 20 % mark-up 30 % mark-up   7601 Unwrought aluminium 0,360 N/A 0,360 0,396 0,432 0,468 (L) 7603 Aluminium powders and flakes 1,980 N/A 1,980 2,178 2,376 2,574 (L) 7604 10 10 Bars and rods 2,200 N/A 2,200 2,420 2,640 2,860 (L) 7604 10 90 Profiles 2,220 N/A 2,220 2,442 2,664 2,886 (L) 7604 21 00 Hollow profiles 2,220 N/A 2,220 2,442 2,664 2,886 (L) 7604 29 10 Bars and rods 2,200 N/A 2,200 2,420 2,640 2,860 (L) 7604 29 90 Profiles 2,220 N/A 2,220 2,442 2,664 2,886 (L) 7605 Aluminium wire 2,200 N/A 2,200 2,420 2,640 2,860 (L) 7606 Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm 2,660 N/A 2,660 2,926 3,192 3,458 (L) 7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm 2,660 N/A 2,660 2,926 3,192 3,458 (L) 7608 Aluminium tubes and pipes 2,220 N/A 2,220 2,442 2,664 2,886 (L) 7609 00 00 Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) 2,220 N/A 2,220 2,442 2,664 2,886 (L) 7610 10 00 Doors, windows and their frames and thresholds for doors 2,220 N/A 2,220 2,442 2,664 2,886 (L) 7610 90 Other 2,220 N/A 2,220 2,442 2,664 2,886 (L) 7610 90 10 Bridges and bridge-sections, towers and lattice masts 2,220 N/A 2,220 2,442 2,664 2,886 (L) 7610 90 90 Other 2,220 N/A 2,220 2,442 2,664 2,886 (L) 7611 00 00 Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 2,660 N/A 2,660 2,926 3,192 3,458 (L) 7612 Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 2,660 N/A 2,660 2,926 3,192 3,458 (L) 7613 00 00 Aluminium containers for compressed or liquefied gas 2,660 N/A 2,660 2,926 3,192 3,458 (L) 7614 Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated 2,200 N/A 2,200 2,420 2,640 2,860 (L) 7616 10 00 Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles 2,660 N/A 2,660 2,926 3,192 3,458 (L) 7616 91 00 Cloth, grill, netting and fencing, of aluminium wire 2,660 N/A 2,660 2,926 3,192 3,458 (L) 7616 99 10 Cast 1,980 N/A 1,980 2,178 2,376 2,574 (L) 7616 99 90 Other 2,660 N/A 2,660 2,926 3,192 3,458 (L) Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066   Equatorial Guinea Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N.A. 10,820 11,902 12,984 14,066   Eritrea Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – _ _ _   2523 10 00 White clinker – – – _ _ _   2523 10 00 Grey clinker 0,850 0,060 0,910 1,001 1,092 1,183 (A) 2523 21 00 White Portland cement – – – _ _ _   2523 29 00 Grey Portland cement 0,850 0,110 0,960 1,056 1,152 1,248   2523 90 00 White hydraulic cements – – – _ _ _   2523 90 00 Grey hydraulic cements – – – _ _ _   2523 30 00 Aluminous cement – – – _ _ _   Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066   Eswatini Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – _ _ _ (A) 2523 10 00 White clinker – – – _ _ _ (B) 2523 10 00 Grey clinker – – – _ _ _ (A) 2523 21 00 White Portland cement – – – _ _ _   2523 29 00 Grey Portland cement 1,170 0,080 1,250 1,375 1,500 1,625   2523 90 00 White hydraulic cements – – – _ _ _   2523 90 00 Grey hydraulic cements 1,120 0,080 1,200 1,320 1,440 1,560 (A) 2523 30 00 Aluminous cement – – – _ _ _   Ethiopia Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – _ _ _   2523 10 00 White clinker – – – _ _ _   2523 10 00 Grey clinker 0,850 0 0,850 0,935 1,020 1,105 (A) 2523 21 00 White Portland cement – – – _ _ _   2523 29 00 Grey Portland cement 0,850 0 0,850 0,935 1,020 1,105   2523 90 00 White hydraulic cements – – – _ _ _   2523 90 00 Grey hydraulic cements – – – _ _ _   2523 30 00 Aluminous cement – – – _ _ _   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 1,830 0,050 1,880 1,899 1,899 1,899   2814 10 00 Anhydrous ammonia – – – _ _ _   2814 20 00 Ammonia in aqueous solution 0,830 0,050 0,880 0,889 0,889 0,889   2834 21 00 Nitrate of potassium 1,720 0,070 1,800 1,818 1,818 1,818   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,600 0,040 0,640 0,646 0,646 0,646   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 1 0,040 1,030 1,040 1,040 1,040   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,810 0,120 1,930 1,949 1,949 1,949   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,770 0,120 1,890 1,909 1,909 1,909   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,790 0,070 0,860 0,869 0,869 0,869   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,280 0,080 1,370 1,384 1,384 1,384   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,310 0,060 1,380 1,394 1,394 1,394   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,020 0,100 2,120 2,141 2,141 2,141   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,740 0,090 1,830 1,848 1,848 1,848   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,740 0,090 1,830 1,848 1,848 1,848   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,860 0,080 2,940 2,969 2,969 2,969   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,690 0,090 1,780 1,798 1,798 1,798   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,480 0,080 1,560 1,576 1,576 1,576   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,670 0,100 1,770 1,788 1,788 1,788   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,770 0,070 0,840 0,848 0,848 0,848   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,890 0,080 0,970 0,980 0,980 0,980   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,600 0,060 0,660 0,667 0,667 0,667   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,640 0,060 0,700 0,707 0,707 0,707   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,400 0,040 0,450 0,455 0,455 0,455   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,200 0,100 1,300 1,313 1,313 1,313   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,720 0,100 0,820 0,828 0,828 0,828   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,170 0,070 1,230 1,242 1,242 1,242   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,600 0,040 0,640 0,646 0,646 0,646   Gabon Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – _ _ _   2523 10 00 White clinker – – – _ _ _   2523 10 00 Grey clinker 1,24 0,04 1,28 1,408 1,536 1,664 (A) 2523 21 00 White Portland cement – – – _ _ _   2523 29 00 Grey Portland cement 1,13 0,06 1,19 1,309 1,428 1,547   2523 90 00 White hydraulic cements – – – _ _ _   2523 90 00 Grey hydraulic cements 1,07 0,06 1,14 1,254 1,368 1,482 (A) 2523 30 00 Aluminous cement – – – _ _ _   Georgia Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – _ _ _   2523 10 00 White clinker – – – _ _ _   2523 10 00 Grey clinker 1,360 0,010 1,360 1,496 1,632 1,768 (A) 2523 21 00 White Portland cement – – – _ _ _   2523 29 00 Grey Portland cement 1,190 0,020 1,200 1,320 1,440 1,560   2523 90 00 White hydraulic cements – – – _ _ _   2523 90 00 Grey hydraulic cements – – – _ _ _   2523 30 00 Aluminous cement – – – _ _ _   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 2,780 0,010 2,780 2,808 2,808 2,808   2814 10 00 Anhydrous ammonia 2,160 0,030 2,190 2,212 2,212 2,212   2814 20 00 Ammonia in aqueous solution 0,650 0,010 0,660 0,667 0,667 0,667   2834 21 00 Nitrate of potassium 2,240 0,020 2,250 2,273 2,273 2,273   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,490 0,010 0,500 0,505 0,505 0,505   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,810 0,010 0,820 0,828 0,828 0,828   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,470 0,030 1,500 1,515 1,515 1,515   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,440 0,030 1,470 1,485 1,485 1,485   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,640 0,040 0,670 0,677 0,677 0,677   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,430 0,040 1,470 1,485 1,485 1,485   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,690 0,030 1,720 1,737 1,737 1,737   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,600 0,040 2,640 2,666 2,666 2,666   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,230 0,040 2,270 2,293 2,293 2,293   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,230 0,040 2,270 2,293 2,293 2,293   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 4,330 0,010 4,340 4,383 4,383 4,383   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,180 0,040 2,220 2,242 2,242 2,242   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,630 0,030 1,660 1,677 1,677 1,677   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,660 0,040 1,700 1,717 1,717 1,717   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,820 0,040 0,860 0,869 0,869 0,869   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,090 0,050 1,140 1,151 1,151 1,151   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,740 0,040 0,780 0,788 0,788 0,788   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,510 0,020 0,530 0,535 0,535 0,535   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,320 0,020 0,350 0,354 0,354 0,354   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,500 0,060 1,570 1,586 1,586 1,586   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,590 0,060 0,650 0,657 0,657 0,657   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,470 0,030 1,500 1,515 1,515 1,515   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,750 0,030 0,780 0,788 0,788 0,788   Iron and steel         10 % mark-up 20 % mark-up 30 % mark-up   7202 11 Ferro-manganese, containing by weight > 2% of carbon 1,690 N/A 1,690 1,859 2,028 2,197   7202 19 Ferro-manganese, containing by weight <= 2% carbon _ _ _ _ _ _   7202 41 Ferro-chromium, containing by weight > 4% of carbon 2,350 N/A 2,350 2,585 2,820 3,055   7202 49 Ferro-chromium, containing by weight <= 4% of carbon _ _ _ _ _ _   7202 60 00 Ferro-nickel 3,480 N/A 3,480 3,828 4,176 4,524   Ghana Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay 0,180 0,100 0,280 0,308 0,336 0,364 (A) 2523 10 00 White clinker – – – _ _ _   2523 10 00 Grey clinker 0,850 0,030 0,880 0,968 1,056 1,144 (A) 2523 21 00 White Portland cement – – – _ _ _   2523 29 00 Grey Portland cement 1,050 0,050 1,100 1,210 1,320 1,430   2523 90 00 White hydraulic cements – – – _ _ _   2523 90 00 Grey hydraulic cements 1 0,050 1,060 1,166 1,272 1,378 (A) 2523 30 00 Aluminous cement – – – _ _ _   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 1,800 0,050 1,850 1,869 1,869 1,869   2814 10 00 Anhydrous ammonia – – – _ _ _   2814 20 00 Ammonia in aqueous solution 0,700 0,040 0,750 0,758 0,758 0,758   2834 21 00 Nitrate of potassium 1,630 0,060 1,690 1,707 1,707 1,707   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 1,190 0,030 1,220 1,232 1,232 1,232   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 1,970 0,030 2 2,020 2,020 2,020   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 3,570 0,100 3,680 3,717 3,717 3,717   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 3,500 0,100 3,600 3,636 3,636 3,636   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,680 0,060 0,750 0,758 0,758 0,758   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,180 0,080 1,250 1,263 1,263 1,263   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,240 0,060 1,300 1,313 1,313 1,313   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,910 0,090 2 2,020 2,020 2,020   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,650 0,080 1,730 1,747 1,747 1,747   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,650 0,080 1,730 1,747 1,747 1,747   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,810 0,070 2,890 2,919 2,919 2,919   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,600 0,080 1,680 1,697 1,697 1,697   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 2 0,080 2,080 2,101 2,101 2,101   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 2,530 0,090 2,620 2,646 2,646 2,646   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,700 0,060 0,770 0,778 0,778 0,778   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,840 0,070 0,910 0,919 0,919 0,919   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,570 0,050 0,620 0,626 0,626 0,626   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,550 0,050 0,600 0,606 0,606 0,606   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,350 0,040 0,390 0,394 0,394 0,394   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,130 0,090 1,220 1,232 1,232 1,232   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,630 0,090 0,720 0,727 0,727 0,727   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,100 0,060 1,160 1,172 1,172 1,172   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,570 0,040 0,610 0,616 0,616 0,616   Aluminium         10 % mark-up 20 % mark-up 30 % mark-up   7601 Unwrought aluminium 1,700 N/A 1,700 1,870 2,040 2,210 (K) 7603 Aluminium powders and flakes 1,810 N/A 1,810 1,991 2,172 2,353 (K) 7604 10 10 Bars and rods 2,030 N/A 2,030 2,233 2,436 2,639 (K) 7604 10 90 Profiles 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7604 21 00 Hollow profiles 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7604 29 10 Bars and rods 2,030 N/A 2,030 2,233 2,436 2,639 (K) 7604 29 90 Profiles 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7605 Aluminium wire 2,030 N/A 2,030 2,233 2,436 2,639 (K) 7606 Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7608 Aluminium tubes and pipes 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7609 00 00 Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7610 10 00 Doors, windows and their frames and thresholds for doors 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7610 90 Other 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7610 90 10 Bridges and bridge-sections, towers and lattice masts 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7610 90 90 Other 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7611 00 00 Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7612 Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7613 00 00 Aluminium containers for compressed or liquefied gas 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7614 Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated 2,030 N/A 2,030 2,233 2,436 2,639 (K) 7616 10 00 Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7616 91 00 Cloth, grill, netting and fencing, of aluminium wire 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7616 99 10 Cast 1,810 N/A 1,810 1,991 2,172 2,353 (K) 7616 99 90 Other 2,490 N/A 2,490 2,739 2,988 3,237 (K) Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066   Guatemala Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – _ _ _   2523 10 00 White clinker – – – _ _ _   2523 10 00 Grey clinker 0,870 0,070 0,940 1,034 1,128 1,222 (A) 2523 21 00 White Portland cement – – – _ _ _   2523 29 00 Grey Portland cement 0,870 0,110 0,980 1,078 1,176 1,274   2523 90 00 White hydraulic cements – – – _ _ _   2523 90 00 Grey hydraulic cements 0,830 0,120 0,950 1,045 1,140 1,235 (A) 2523 30 00 Aluminous cement – – – _ _ _   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 1,820 0,080 1,890 1,909 1,909 1,909   2814 10 00 Anhydrous ammonia – – – _ _ _   2814 20 00 Ammonia in aqueous solution 0,680 0,070 0,750 0,758 0,758 0,758   2834 21 00 Nitrate of potassium 1,620 0,110 1,730 1,747 1,747 1,747   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,510 0,060 0,570 0,576 0,576 0,576   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,840 0,060 0,900 0,909 0,909 0,909   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,530 0,180 1,710 1,727 1,727 1,727   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,500 0,180 1,670 1,687 1,687 1,687   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,660 0,130 0,790 0,798 0,798 0,798   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,160 0,150 1,310 1,323 1,323 1,323   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,240 0,110 1,350 1,364 1,364 1,364   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,900 0,170 2,070 2,091 2,091 2,091   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,640 0,160 1,800 1,818 1,818 1,818   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,640 0,160 1,800 1,818 1,818 1,818   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,830 0,120 2,950 2,980 2,980 2,980   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,590 0,150 1,740 1,757 1,757 1,757   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,330 0,140 1,470 1,485 1,485 1,485   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,470 0,160 1,640 1,656 1,656 1,656   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,690 0,130 0,820 0,828 0,828 0,828   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,830 0,160 0,990 1 1 1   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,560 0,120 0,680 0,687 0,687 0,687   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,530 0,100 0,630 0,636 0,636 0,636   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,340 0,080 0,420 0,424 0,424 0,424   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,130 0,200 1,320 1,333 1,333 1,333   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,610 0,150 0,760 0,768 0,768 0,768   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,090 0,120 1,210 1,222 1,222 1,222   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,560 0,080 0,650 0,657 0,657 0,657   Aluminium         10 % mark-up 20 % mark-up 30 % mark-up   7601 Unwrought aluminium 0,360 N/A 0,360 0,396 0,432 0,468 (L) 7603 Aluminium powders and flakes 1,980 N/A 1,980 2,178 2,376 2,574 (L) 7604 10 10 Bars and rods 2,200 N/A 2,200 2,420 2,640 2,860 (L) 7604 10 90 Profiles 2,220 N/A 2,220 2,442 2,664 2,886 (L) 7604 21 00 Hollow profiles 2,220 N/A 2,220 2,442 2,664 2,886 (L) 7604 29 10 Bars and rods 2,200 N/A 2,200 2,420 2,640 2,860 (L) 7604 29 90 Profiles 2,220 N/A 2,220 2,442 2,664 2,886 (L) 7605 Aluminium wire 2,200 N/A 2,200 2,420 2,640 2,860 (L) 7606 Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm 2,660 N/A 2,660 2,926 3,192 3,458 (L) 7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm 2,660 N/A 2,660 2,926 3,192 3,458 (L) 7608 Aluminium tubes and pipes 2,220 N/A 2,220 2,442 2,664 2,886 (L) 7609 00 00 Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) 2,220 N/A 2,220 2,442 2,664 2,886 (L) 7610 10 00 Doors, windows and their frames and thresholds for doors 2,220 N/A 2,220 2,442 2,664 2,886 (L) 7610 90 Other 2,220 N/A 2,220 2,442 2,664 2,886 (L) 7610 90 10 Bridges and bridge-sections, towers and lattice masts 2,220 N/A 2,220 2,442 2,664 2,886 (L) 7610 90 90 Other 2,220 N/A 2,220 2,442 2,664 2,886 (L) 7611 00 00 Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 2,660 N/A 2,660 2,926 3,192 3,458 (L) 7612 Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 2,660 N/A 2,660 2,926 3,192 3,458 (L) 7613 00 00 Aluminium containers for compressed or liquefied gas 2,660 N/A 2,660 2,926 3,192 3,458 (L) 7614 Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated 2,200 N/A 2,200 2,420 2,640 2,860 (L) 7616 10 00 Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles 2,660 N/A 2,660 2,926 3,192 3,458 (L) 7616 91 00 Cloth, grill, netting and fencing, of aluminium wire 2,660 N/A 2,660 2,926 3,192 3,458 (L) 7616 99 10 Cast 1,980 N/A 1,980 2,178 2,376 2,574 (L) 7616 99 90 Other 2,660 N/A 2,660 2,926 3,192 3,458 (L) Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066   Haiti Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – _ _ _   2523 10 00 White clinker – – – _ _ _   2523 10 00 Grey clinker 1,090 0,060 1,160 1,276 1,392 1,508 (A) 2523 21 00 White Portland cement – – – _ _ _   2523 29 00 Grey Portland cement 1,110 0,100 1,200 1,320 1,440 1,560   2523 90 00 White hydraulic cements – – – _ _ _   2523 90 00 Grey hydraulic cements 1,050 0,100 1,150 1,265 1,380 1,495 (A) 2523 30 00 Aluminous cement – – – _ _ _   Honduras Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – _ _ _   2523 10 00 White clinker – – – _ _ _   2523 10 00 Grey clinker 0,870 0,040 0,910 1,001 1,092 1,183 (A) 2523 21 00 White Portland cement – – – _ _ _   2523 29 00 Grey Portland cement 0,880 0,070 0,940 1,034 1,128 1,222   2523 90 00 White hydraulic cements – – – _ _ _   2523 90 00 Grey hydraulic cements 0,840 0,070 0,910 1,001 1,092 1,183 (A) 2523 30 00 Aluminous cement – – – _ _ _   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 1,800 0,040 1,850 1,869 1,869 1,869   2814 10 00 Anhydrous ammonia – – – _ _ _   2814 20 00 Ammonia in aqueous solution 0,680 0,040 0,720 0,727 0,727 0,727   2834 21 00 Nitrate of potassium 1,620 0,060 1,680 1,697 1,697 1,697   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 1,500 0,040 1,540 1,555 1,555 1,555   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 2,490 0,040 2,530 2,555 2,555 2,555   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 4,530 0,110 4,640 4,686 4,686 4,686   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 4,430 0,100 4,530 4,575 4,575 4,575   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,660 0,080 0,740 0,747 0,747 0,747   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,160 0,090 1,250 1,263 1,263 1,263   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,230 0,070 1,300 1,313 1,313 1,313   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,890 0,100 1,990 2,010 2,010 2,010   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,630 0,100 1,730 1,747 1,747 1,747   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,630 0,100 1,730 1,747 1,747 1,747   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,810 0,070 2,880 2,909 2,909 2,909   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,590 0,090 1,680 1,697 1,697 1,697   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 2,310 0,080 2,390 2,414 2,414 2,414   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 3,010 0,100 3,110 3,141 3,141 3,141   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,690 0,080 0,770 0,778 0,778 0,778   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,830 0,090 0,920 0,929 0,929 0,929   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,560 0,070 0,630 0,636 0,636 0,636   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,530 0,060 0,590 0,596 0,596 0,596   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,340 0,050 0,380 0,384 0,384 0,384   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,120 0,120 1,240 1,252 1,252 1,252   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,610 0,100 0,710 0,717 0,717 0,717   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,090 0,070 1,160 1,172 1,172 1,172   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,560 0,050 0,610 0,616 0,616 0,616   Hong Kong Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – _ _ _   2523 10 00 White clinker – – – _ _ _   2523 10 00 Grey clinker 0,870 0,050 0,910 1,001 1,092 1,183 (A) 2523 21 00 White Portland cement – – – _ _ _   2523 29 00 Grey Portland cement 0,900 0,080 0,980 1,078 1,176 1,274   2523 90 00 White hydraulic cements – – – _ _ _   2523 90 00 Grey hydraulic cements 0,860 0,080 0,940 1,034 1,128 1,222 (A) 2523 30 00 Aluminous cement – – – _ _ _   India Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – _ _ _   2523 10 00 White clinker 1,350 0,070 1,410 1,551 1,692 1,833 (B) 2523 10 00 Grey clinker 1,390 0,050 1,440 1,584 1,728 1,872 (A) 2523 21 00 White Portland cement 1,330 0,140 1,470 1,617 1,764 1,911   2523 29 00 Grey Portland cement 1,390 0,090 1,480 1,628 1,776 1,924   2523 90 00 White hydraulic cements – – – _ _ _   2523 90 00 Grey hydraulic cements – – – _ _ _   2523 30 00 Aluminous cement 2,050 0,240 2,290 2,519 2,748 2,977   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 1,940 0,070 2,010 2,030 2,030 2,030   2814 10 00 Anhydrous ammonia 3,060 0,220 3,280 3,313 3,313 3,313   2814 20 00 Ammonia in aqueous solution 0,920 0,070 0,990 1 1 1   2834 21 00 Nitrate of potassium 1,860 0,100 1,960 1,980 1,980 1,980   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,680 0,060 0,740 0,747 0,747 0,747   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 1,130 0,060 1,180 1,192 1,192 1,192   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 2,050 0,170 2,220 2,242 2,242 2,242   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 2 0,160 2,170 2,192 2,192 2,192   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,890 0,120 1,010 1,020 1,020 1,020   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,410 0,140 1,550 1,566 1,566 1,566   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,420 0,110 1,520 1,535 1,535 1,535   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,180 0,160 2,340 2,363 2,363 2,363   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,890 0,150 2,040 2,060 2,060 2,060   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,890 0,150 2,040 2,060 2,060 2,060   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 3,030 0,110 3,140 3,171 3,171 3,171   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,830 0,140 1,970 1,990 1,990 1,990   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,620 0,130 1,750 1,768 1,768 1,768   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,850 0,150 2,010 2,030 2,030 2,030   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,850 0,120 0,980 0,990 0,990 0,990   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,970 0,150 1,120 1,131 1,131 1,131   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,660 0,110 0,770 0,778 0,778 0,778   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,720 0,090 0,810 0,818 0,818 0,818   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,450 0,070 0,530 0,535 0,535 0,535   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,310 0,180 1,490 1,505 1,505 1,505   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,820 0,150 0,970 0,980 0,980 0,980   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,270 0,110 1,380 1,394 1,394 1,394   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,660 0,080 0,730 0,737 0,737 0,737   Aluminium         10 % mark-up 20 % mark-up 30 % mark-up   7601 Unwrought aluminium 1,870 N/A 1,870 2,057 2,244 2,431 (K) 7603 Aluminium powders and flakes 3,071 N/A 3,071 3,378 3,686 3,993 (K) 7604 10 10 Bars and rods 3,413 N/A 3,413 3,754 4,095 4,436 (K) 7604 10 90 Profiles 3,444 N/A 3,444 3,788 4,132 4,477 (K) 7604 21 00 Hollow profiles 3,444 N/A 3,444 3,788 4,132 4,477 (K) 7604 29 10 Bars and rods 3,413 N/A 3,413 3,754 4,095 4,436 (K) 7604 29 90 Profiles 3,444 N/A 3,444 3,788 4,132 4,477 (K) 7605 Aluminium wire 2,594 N/A 2,594 2,853 3,113 3,372 (K) 7606 Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm 4,126 N/A 4,126 4,539 4,951 5,364 (K) 7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm 4,126 N/A 4,126 4,539 4,951 5,364 (K) 7608 Aluminium tubes and pipes 3,444 N/A 3,444 3,788 4,132 4,477 (K) 7609 00 00 Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) 3,444 N/A 3,444 3,788 4,132 4,477 (K) 7610 10 00 Doors, windows and their frames and thresholds for doors 3,444 N/A 3,444 3,788 4,132 4,477 (K) 7610 90 Other 3,444 N/A 3,444 3,788 4,132 4,477 (K) 7610 90 10 Bridges and bridge-sections, towers and lattice masts 3,444 N/A 3,444 3,788 4,132 4,477 (K) 7610 90 90 Other 3,444 N/A 3,444 3,788 4,132 4,477 (K) 7611 00 00 Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 4,126 N/A 4,126 4,539 4,951 5,364 (K) 7612 Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 4,126 N/A 4,126 4,539 4,951 5,364 (K) 7613 00 00 Aluminium containers for compressed or liquefied gas 4,126 N/A 4,126 4,539 4,951 5,364 (K) 7614 Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated 3,413 N/A 3,413 3,754 4,095 4,436 (K) 7616 10 00 Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles 4,126 N/A 4,126 4,539 4,951 5,364 (K) 7616 91 00 Cloth, grill, netting and fencing, of aluminium wire 4,126 N/A 4,126 4,539 4,951 5,364 (K) 7616 99 10 Cast 3,071 N/A 3,071 3,378 3,686 3,993 (K) 7616 99 90 Other 4,126 N/A 4,126 4,539 4,951 5,364 (K) Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 14,030 N/A 14,030 15,433 16,836 18,239   Iron and steel         10 % mark-up 20 % mark-up 30 % mark-up   2601 12 00 Agglomerated iron ores and concentrates (excl. roasted iron pyrites) 0,290 0,050 0,340 0,374 0,408 0,442   7201 Pig iron and spiegeleisen, in pigs, blocks or other primary forms 2,530 N/A 2,530 2,783 3,036 3,289   7202 11 Ferro-manganese, containing by weight > 2% of carbon 1,690 N/A 1,690 1,859 2,028 2,197   7202 19 Ferro-manganese, containing by weight <= 2% carbon 5,590 N/A 5,590 6,149 6,708 7,267   7202 41 Ferro-chromium, containing by weight > 4% of carbon 2,350 N/A 2,350 2,585 2,820 3,055   7202 49 Ferro-chromium, containing by weight <= 4% of carbon – N/A – _ _ _   7202 60 00 Ferro-nickel 3,480 N/A 3,480 3,828 4,176 4,524   7203 Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99,94%, in lumps, pellets or similar forms 4,200 N/A 4,200 4,620 5,040 5,460   7205 Granules and powders of pig iron, spiegeleisen, iron or steel (excl. granules and powders of ferro-alloys, turnings and filings of iron or steel, radioactive iron powders "isotopes" and certain low-calibre, substandard balls for ballbearings) 2,540 N/A 2,540 2,794 3,048 3,302 (C) 7206 Iron and non-alloy steel in ingots or other primary forms (excl. remelting scrap ingots, products obtained by continuous casting and iron of heading 7203) see below see below see below see below see below see below   7206 10 00 Ingots, of iron and non-alloy steel (excl. remelted scrap ingots, continuous cast products, iron of heading 7203) 2,640 N/A 2,640 2,904 3,168 3,432 (C) 7206 90 00 Iron and non-alloy steel, in puddled bars or other primary forms (excl. ingots, remelted scrap ingots, continuous cast products, iron of heading 7203) 2,640 N/A 2,640 2,904 3,168 3,432 (C) 7207 Semi-finished products of iron or non-alloy steel see below see below see below see below see below see below   7207 11 11 Semi-finished products, of non-alloy free-cutting steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting 4,270 N/A 4,270 4,697 5,124 5,551 (C) 7207 11 14 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness of <= 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel) 4,270 N/A 4,270 4,697 5,124 5,551 (C) 7207 11 16 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness of > 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel) 4,270 N/A 4,270 4,697 5,124 5,551 (C) 7207 11 90 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular cross-section, the width < twice the thickness, forged 4,320 N/A 4,320 4,752 5,184 5,616 (C) 7207 12 10 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtained by continuous casting 4,270 N/A 4,270 4,697 5,124 5,551 (C) 7207 12 90 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular "other than square" cross-section, the width >= twice the thickness, forged 4,320 N/A 4,320 4,752 5,184 5,616 (C) 7207 19 12 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting 4,270 N/A 4,270 4,697 5,124 5,551 (C) 7207 19 19 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, forged 4,320 N/A 4,320 4,752 5,184 5,616 (C) 7207 19 80 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon (excl. semi-products, of square, rectangular, circular or polygonal cross-section) 4,270 N/A 4,270 4,697 5,124 5,551 (C) 7207 20 11 Semi-finished products, of non-alloy free-cutting steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting 4,270 N/A 4,270 4,697 5,124 5,551 (C) 7207 20 15 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% but < 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel) 4,270 N/A 4,270 4,697 5,124 5,551 (C) 7207 20 17 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel) 4,270 N/A 4,270 4,697 5,124 5,551 (C) 7207 20 19 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, forged 4,320 N/A 4,320 4,752 5,184 5,616 (C) 7207 20 32 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtained by continuous casting 4,270 N/A 4,270 4,697 5,124 5,551 (C) 7207 20 39 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of rectangular "other than square" cross-section and the width >= twice the thickness, forged 4,320 N/A 4,320 4,752 5,184 5,616 (C) 7207 20 52 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting 4,270 N/A 4,270 4,697 5,124 5,551 (C) 7207 20 59 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of circular or polygonal cross-section, forged 4,320 N/A 4,320 4,752 5,184 5,616 (C) 7207 20 80 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon (excl. those of square, rectangular, circular or polygonal cross-section) 4,270 N/A 4,270 4,697 5,124 5,551 (C) 7208 Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled, not clad, plated or coated 4,280 N/A 4,280 4,708 5,136 5,564 (C) 7209 Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, cold-rolled "cold-reduced", not clad, plated or coated 4,280 N/A 4,280 4,708 5,136 5,564 (C) 7210 Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated 4,280 N/A 4,280 4,708 5,136 5,564 (C) 7211 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", not clad, plated or coated see below see below see below see below see below see below   7211 13 00 Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as "wide flats" 4,280 N/A 4,280 4,708 5,136 5,564 (C) 7211 14 00 Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, not further worked than hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm (excl. "wide flats") 4,280 N/A 4,280 4,708 5,136 5,564 (C) 7211 19 00 Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, simply hot-rolled, not clad, plated or coated, of a thickness < 4,75 mm (excl. "wide flats") 4,280 N/A 4,280 4,708 5,136 5,564 (C) 7211 23 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight < 0,25% of carbon 4,280 N/A 4,280 4,708 5,136 5,564 (C) 7211 29 00 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight >= 0,25% of carbon 4,280 N/A 4,280 4,708 5,136 5,564 (C) 7211 90 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked, but not clad, plated or coated 4,280 N/A 4,280 4,708 5,136 5,564 (C) 7212 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated 4,280 N/A 4,280 4,708 5,136 5,564 (C) 7213 Bars and rods of iron or non-alloy steel, hot-rolled, in irregularly wound coils 4,270 N/A 4,270 4,697 5,124 5,551 (C) 7214 Bars and rods, of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but incl. those twisted after rolling (excl. in irregularly wound coils) see below see below see below see below see below see below   7214 10 00 Bars and rods, of iron or non-alloy steel, not further worked than forged (excl. in irregularly wound coils) 4,320 N/A 4,320 4,752 5,184 5,616 (C) 7214 20 00 Bars and rods, of iron or non-alloy steel, with indentations, ribs, groves or other deformations produced during the rolling process 4,270 N/A 4,270 4,697 5,124 5,551 (C) 7214 30 00 Bars and rods, of non-alloy free-cutting steel, not further worked than hot-rolled, hot-drawn or hot-extruded (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling) 4,270 N/A 4,270 4,697 5,124 5,551 (C) 7214 91 Bars and rods, of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, of rectangular "other than square" cross-section (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process, bars and rods twisted after rolling and free-cutting steel) 4,270 N/A 4,270 4,697 5,124 5,551 (C) 7214 99 Bars and rods, of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded (excl. of rectangular [other than square] cross-section and those containing indentations, ribs, grooves or other deformations produced during the rolling process, and of non-alloy free-cutting steel) 4,270 N/A 4,270 4,697 5,124 5,551 (C) 7215 Bars and rods, of iron or non-alloy steel, cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked, n.e.s. 4,270 N/A 4,270 4,697 5,124 5,551 (C) 7216 Angles, shapes and sections of iron or non-alloy steel, n.e.s. 4,270 N/A 4,270 4,697 5,124 5,551 (C) 7217 Wire of iron or non-alloy steel, in coils (excl. bars and rods) see below see below see below see below see below see below   7217 10 Wire of iron or non-alloy steel, in coils, not plated or coated, whether or not polished (excl. bars and rods) 4,270 N/A 4,270 4,697 5,124 5,551 (C) 7217 20 Wire of iron or non-alloy steel, in coils, plated or coated with zinc (excl. bars and rods) 4,270 N/A 4,270 4,697 5,124 5,551 (C) 7217 30 Wire of iron or non-alloy steel, in coils, plated or coated with base metals (excl. plated or coated with zinc, and bars and rods) 4,270 N/A 4,270 4,697 5,124 5,551 (C) 7217 90 Wire of iron or non-alloy steel, in coils, plated or coated (excl. plated or coated with base metals, and bars and rods) 4,270 N/A 4,270 4,697 5,124 5,551 (C) 7218 Stainless steel in ingots or other primary forms (excl. remelting scrap ingots and products obtained by continuous casting); semi-finished products of stainless steel see below see below see below see below see below see below   7218 10 00 Steel, stainless, in ingots and other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) 6,530 N/A 6,530 7,183 7,836 8,489   7218 91 Semi-finished products of stainless steel, of rectangular "other than square" cross-section 6,490 N/A 6,490 7,139 7,788 8,437   7218 99 11 Semi-finished products of stainless steel, of square cross-section, rolled or obtained by continuous casting 6,490 N/A 6,490 7,139 7,788 8,437   7218 99 19 Semi-finished products of stainless steel, of square cross-section, forged 6,530 N/A 6,530 7,183 7,836 8,489   7218 99 20 Semi-finished products of stainless steel, of circular cross-section or of cross-section other than square or rectangular, rolled or obtained by continuous casting 6,490 N/A 6,490 7,139 7,788 8,437   7218 99 80 Semi-finished products of stainless steel, forged (excl. products of square or rectangular cross-section) 6,530 N/A 6,530 7,183 7,836 8,489   7219 Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7219 11 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of > 10 mm 6,490 N/A 6,490 7,139 7,788 8,437   7219 12 Flat-rolled products of stainless steel, of a width of>= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 4,7 mm and <= 10 mm 6,490 N/A 6,490 7,139 7,788 8,437   7219 13 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 3 mm and < 4,75 mm 6,490 N/A 6,490 7,139 7,788 8,437   7219 14 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of < 3 mm 6,490 N/A 6,490 7,139 7,788 8,437   7219 21 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of > 10 mm 6,490 N/A 6,490 7,139 7,788 8,437   7219 22 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 4,75 mm and <= 10 mm 6,490 N/A 6,490 7,139 7,788 8,437   7219 23 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 3 mm and < 4,75 mm 6,490 N/A 6,490 7,139 7,788 8,437   7219 24 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of < 3 mm 6,490 N/A 6,490 7,139 7,788 8,437   7219 31 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 4,75 mm 6,500 N/A 6,500 7,150 7,800 8,450   7219 32 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 3 mm but < 4,75 mm 6,500 N/A 6,500 7,150 7,800 8,450   7219 33 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of > 1 mm but < 3 mm 6,500 N/A 6,500 7,150 7,800 8,450   7219 34 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 0,5 mm but <= 1 mm 6,500 N/A 6,500 7,150 7,800 8,450   7219 35 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of < 0,5 mm 6,500 N/A 6,500 7,150 7,800 8,450   7219 90 Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked 6,500 N/A 6,500 7,150 7,800 8,450   7220 Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7220 11 00 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of >= 4,75 mm 6,490 N/A 6,490 7,139 7,788 8,437   7220 12 00 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of < 4,75 mm 6,490 N/A 6,490 7,139 7,788 8,437   7220 20 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" 6,500 N/A 6,500 7,150 7,800 8,450   7220 90 Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked 6,500 N/A 6,500 7,150 7,800 8,450   7221 Bars and rods of stainless steel, hot-rolled, in irregularly wound coils 6,480 N/A 6,480 7,128 7,776 8,424   7222 Other bars and rods of stainless steel; angles, shapes and sections of stainless steel, n.e.s. see below see below see below see below see below see below   7222 11 Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only hot-extruded, of circular cross-section 6,480 N/A 6,480 7,128 7,776 8,424   7222 19 Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only extruded (excl. of circular cross-section) 6,480 N/A 6,480 7,128 7,776 8,424   7222 20 Other bars and rods of stainless steel, not further worked than cold-formed or cold-finished 6,480 N/A 6,480 7,128 7,776 8,424   7222 30 Other bars and rods of stainless steel, cold-formed or cold-finished and further worked, or not further worked than forged, or forged, or hot-formed by other means and further worked, n.e.s. 6,530 N/A 6,530 7,183 7,836 8,489   7222 40 Angles, shapes and sections of stainless steel, n.e.s. 6,480 N/A 6,480 7,128 7,776 8,424   7223 Wire of stainless steel, in coils (excl. bars and rods) see below see below see below see below see below see below   7223 00 Wire of stainless steel, in coils (excl. bars and rods) 6,480 N/A 6,480 7,128 7,776 8,424   7224 Steel, alloy, other than stainless, in ingots or other primary forms, semi-finished products of alloy steel other than stainless (excl. waste and scrap in ingot form, and products obtained by continuous casting) see below see below see below see below see below see below   7224 10 Steel, alloy, other than stainless, in ingots or other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) 7,350 N/A 7,350 8,085 8,820 9,555 (F) 7224 90 02 Semi-finished products of tool steel 7,320 N/A 7,320 8,052 8,784 9,516 (F) 7224 90 03 Semi-finished products of high-speed steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting the width measuring < twice the thickness 7,320 N/A 7,320 8,052 8,784 9,516 (F) 7224 90 05 Semi-finished products of steel containing by weight <= 0,7% of carbon, 0,5% to 1,2% of manganese, 0,6% to 2,3% of silicon, or of steel containing by weight >= 0,0008% of boron with any other element < the minimum content referred to in Note 1 f to chapter 72, of square or rectangular cross-section, hot rolled or obtained by continuous casting, the width measuring < twice the thickness 7,320 N/A 7,320 8,052 8,784 9,516 (F) 7224 90 07 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring < twice the thickness (excl. of tool steel, high-speed steel and articles of subheading 7224.90.05) 7,320 N/A 7,320 8,052 8,784 9,516 (F) 7224 90 14 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring >= twice the thickness (excl. of tool steel) 7,320 N/A 7,320 8,052 8,784 9,516 (F) 7224 90 18 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, forged (excl. of tool steel) 7,350 N/A 7,350 8,085 8,820 9,555 (F) 7224 90 31 Semi-finished products of steel containing by weight 0,9% to 1,15% carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting 7,320 N/A 7,320 8,052 8,784 9,516 (F) 7224 90 38 Semi-finished products of alloy steel, other than stainless steel, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting (excl. of tool steel and products containing by weight 0,9% to 1,15% of carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum) 7,320 N/A 7,320 8,052 8,784 9,516 (F) 7224 90 90 Semi-finished products of alloy steel, other than stainless steel, forged (excl. of tool steel and products of square or rectangular, circular or polygamol cross-section) 7,350 N/A 7,350 8,085 8,820 9,555 (F) 7225 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7225 11 00 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, grain-oriented 8,580 N/A 8,580 9,438 10,296 11,154 (C) 7225 19 10 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, hot-rolled 7,320 N/A 7,320 8,052 8,784 9,516 (C) 7225 19 90 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, cold-rolled "cold-reduced", non-grain-oriented 7,320 N/A 7,320 8,052 8,784 9,516 (F) 7225 30 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, in coils (excl. products of silicon-electrical steel) 7,320 N/A 7,320 8,052 8,784 9,516 (F) 7225 40 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, not in coils (excl. products of silicon-electrical steel) 7,320 N/A 7,320 8,052 8,784 9,516 (F) 7225 50 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of silicon-electrical steel) 7,320 N/A 7,320 8,052 8,784 9,516 (F) 7225 91 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and electrolytically plated or coated with zinc (excl. products of silicon-electrical steel) 7,320 N/A 7,320 8,052 8,784 9,516 (F) 7225 92 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and plated or coated with zinc (excl. electrolytically plated or coated and products of silicon-electrical steel) 7,320 N/A 7,320 8,052 8,784 9,516 (F) 7225 99 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. plated or coated with zinc and products of silicon-electrical steel) 7,320 N/A 7,320 8,052 8,784 9,516 (F) 7226 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7226 11 00 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", grain-oriented 8,580 N/A 8,580 9,438 10,296 11,154 (C) 7226 19 10 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, not further worked than hot-rolled 7,320 N/A 7,320 8,052 8,784 9,516 (C) 7226 19 80 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, cold-rolled "cold-reduced", whether or not further worked, or hot-rolled and further worked, non-grain-oriented 7,320 N/A 7,320 8,052 8,784 9,516 (F) 7226 20 00 Flat-rolled products of high-speed steel, of a width of <= 600 mm, hot-rolled or cold-rolled "cold-reduced" 7,320 N/A 7,320 8,052 8,784 9,516 (F) 7226 91 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than hot-rolled (excl. products of high-speed steel or silicon-electrical steel) 7,320 N/A 7,320 8,052 8,784 9,516 (F) 7226 92 00 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of high-speed steel or silicon-electrical steel) 7,320 N/A 7,320 8,052 8,784 9,516 (F) 7226 99 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. products of high-speed steel or silicon-electrical steel) 7,320 N/A 7,320 8,052 8,784 9,516 (F) 7227 Bars and rods of alloy steel other than stainless, hot-rolled, in irregularly wound coils 7,300 N/A 7,300 8,030 8,760 9,490 (C)/(F) 7228 Other bars and rods of alloy steel other than stainless, angles, shapes and sections of alloy steel other than stainless, n.e.s.; hollow drill bars and rods, of alloy or non-alloy steel see below see below see below see below see below see below   7228 10 20 Bars and rods of high-speed steel, not further worked than hot-rolled, hot-drawn or extruded, and hot-rolled, hot-drawn or extruded, not further worked than clad (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 7,300 N/A 7,300 8,030 8,760 9,490 (F) 7228 10 50 Bars and rods of high-speed steel, forged (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 7,350 N/A 7,350 8,085 8,820 9,555 (F) 7228 10 90 Bars and rods of high-speed steel, not further worked than cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked (excl. forged products, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 7,300 N/A 7,300 8,030 8,760 9,490 (F) 7228 20 Bars and rods of silico-manganese steel (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 7,300 N/A 7,300 8,030 8,760 9,490 (F) 7228 30 Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 7,300 N/A 7,300 8,030 8,760 9,490 (C)/(F) 7228 40 Bars and rods of alloy steel other than stainless, not further worked than forged (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 7,350 N/A 7,350 8,085 8,820 9,555 (F) 7228 50 Bars and rods of alloy steel other than stainless, not further worked than cold-formed or cold-finished (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 7,300 N/A 7,300 8,030 8,760 9,490 (C)/(F) 7228 60 Bars and rods of alloy steel other than stainless, cold-formed or cold-finished and further worked or hot-formed and further worked, n.e.s. (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 7,300 N/A 7,300 8,030 8,760 9,490 (F) 7228 70 Angles, shapes and sections of alloy steel other than stainless, n.e.s. 7,300 N/A 7,300 8,030 8,760 9,490 (F) 7228 80 00 Hollow drill bars and rods, of alloy or non-alloy steel 7,300 N/A 7,300 8,030 8,760 9,490 (F) 7229 Wire of alloy steel other than stainless, in coils (excl. bars and rods) 7,300 N/A 7,300 8,030 8,760 9,490 (C)/(F) 7301 Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel 4,300 N/A 4,300 4,730 5,160 5,590 (C) 7302 Railway or tramway track construction material of iron or steel, the following : rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers "cross-ties", fish-plates, chairs, chair wedges, sole plates "base plates", rail clips, bedplates, ties and other material specialised for jointing or fixing rails 5,450 N/A 5,450 5,995 6,540 7,085 (C) 7303 Tubes, pipes and hollow profiles, of cast iron see below see below see below see below see below see below   7303 00 Tubes, pipes and hollow profiles, of cast iron 2,840 N/A 2,840 3,124 3,408 3,692   7304 Tubes, pipes and hollow profiles, seamless, of iron or steel (excl. products of cast iron) see below see below see below see below see below see below   7304 11 00 Line pipe of a kind used for oil or gas pipelines, seamless, of stainless steel 6,490 N/A 6,490 7,139 7,788 8,437   7304 19 Line pipe of a kind used for oil or gas pipelines, seamless, of iron or steel (excl. products of stainless steel or of cast iron) 4,320 N/A 4,320 4,752 5,184 5,616 (C) 7304 22 00 Drill pipe, seamless, of stainless steel, of a kind used in drilling for oil or gas 6,490 N/A 6,490 7,139 7,788 8,437   7304 23 00 Drill pipe, seamless, of a kind used in drilling for oil or gas, of iron or steel (excl. products of stainless steel or of cast iron) 4,320 N/A 4,320 4,752 5,184 5,616 (C) 7304 24 00 Casing and tubing, seamless, of a kind used for drilling for oil or gas, of stainless steel 6,490 N/A 6,490 7,139 7,788 8,437   7304 29 Casing and tubing, seamless, of iron or steel, of a kind used in drilling for oil or gas (excl. products of cast iron) 4,320 N/A 4,320 4,752 5,184 5,616 (C) 7304 31 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" (excl. cast iron products and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used for drilling for oil or gas) 4,320 N/A 4,320 4,752 5,184 5,616 (C) 7304 39 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, not cold-drawn or cold-rolled "cold-reduced" (excl. cast iron products, line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas) 4,320 N/A 4,320 4,752 5,184 5,616 (C) 7304 41 00 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas) 6,490 N/A 6,490 7,139 7,788 8,437   7304 49 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines or of a kind used for drilling for oil or gas) 6,490 N/A 6,490 7,139 7,788 8,437   7304 51 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil) 4,320 N/A 4,320 4,752 5,184 5,616 (F) 7304 59 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil) 4,320 N/A 4,320 4,752 5,184 5,616 (C)/(F) 7304 90 00 Tubes, pipes and hollow profiles, seamless, of non-circular cross-section, of iron or steel (excl. products of cast iron) 4,320 N/A 4,320 4,752 5,184 5,616 (C) 7305 Tubes and pipes, having circular cross-sections and an external diameter of > 406,4 mm, of flat-rolled products of iron or steel "e.g., welded, riveted or similarly closed" 4,320 N/A 4,320 4,752 5,184 5,616 (C) 7306 Tubes, pipes and hollow profiles "e.g., open seam or welded, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless tubes and pipes and tubes having internal and external circular cross-sections and an external diameter of > 406,4 mm) see below see below see below see below see below see below   7306 11 00 Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm 6,500 N/A 6,500 7,150 7,800 8,450   7306 19 00 Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron) 4,320 N/A 4,320 4,752 5,184 5,616 (C) 7306 21 00 Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm 6,500 N/A 6,500 7,150 7,800 8,450   7306 29 00 Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron) 4,320 N/A 4,320 4,752 5,184 5,616 (C) 7306 30 12 Precision tubes, welded, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" 4,320 N/A 4,320 4,752 5,184 5,616 (C) 7306 30 18 Precision tubes, welded, of circular cross-section, of iron or non-alloy steel (excl. cold-drawn or cold-rolled) 4,320 N/A 4,320 4,752 5,184 5,616   7306 30 41 Threaded or threadable tubes "gas pipe", welded, of circular cross-section, of iron or non-alloy steel, plated or coated with zinc 4,320 N/A 4,320 4,752 5,184 5,616 (C) 7306 30 49 Threaded or threadable tubes "gas pipe", welded, of circular cross-section, of iron or non-alloy steel (excl. products plated or coated with zinc) 4,320 N/A 4,320 4,752 5,184 5,616 (C) 7306 30 72 Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel, of an external diameter of <= 168,3 mm, plated or coated with zinc (excl. line pipe of a kind used for oil or gas pipelines or casing and tubingof a kind used in drilling for oil or gas) 4,320 N/A 4,320 4,752 5,184 5,616 (C) 7306 30 77 Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel of an external diameter of <= 168,3 mm (excl. plated or coated with zinc and line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used in drilling for oil or gas, precision tubes and threaded or threadable tubes "gas pipe") 4,320 N/A 4,320 4,752 5,184 5,616 (C) 7306 30 80 Tubes, pipes and hollow profiles, welded, having a circular cross-section, of iron or steel, of an external diameter of > 168,3 mm but <= 406,4 mm (excl. line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, or precision steel tubes, electrical conduit tubes or threaded or threadable tubes "gas pipe") 4,320 N/A 4,320 4,752 5,184 5,616 (C) 7306 40 20 Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. products having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) 6,500 N/A 6,500 7,150 7,800 8,450   7306 40 80 Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel (excl. products cold-drawn or cold-rolled "cold-reduced", tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) 6,490 N/A 6,490 7,139 7,788 8,437   7306 50 21 Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" 4,330 N/A 4,330 4,763 5,196 5,629 (F) 7306 50 29 Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless (excl. cold-drawn or cold-rolled) 4,320 N/A 4,320 4,752 5,184 5,616 (F) 7306 50 80 Tubes, pipes and hollow profiles, welded, of circular cross-section, of alloy steel other than stainless (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and precision steel tubes) 4,330 N/A 4,330 4,763 5,196 5,629 (F) 7306 61 10 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel 6,500 N/A 6,500 7,150 7,800 8,450   7306 61 92 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of <= 2 mm 4,320 N/A 4,320 4,752 5,184 5,616 (C) 7306 61 99 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of > 2 mm 4,320 N/A 4,320 4,752 5,184 5,616 (C) 7306 69 10 Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) 6,500 N/A 6,500 7,150 7,800 8,450   7306 69 90 Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of iron or steel other than stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) 4,320 N/A 4,320 4,752 5,184 5,616 (C) 7306 90 00 Tubes, pipes and hollow profiles "e.g., open seam, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless or welded tubes and pipes and tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm) 4,320 N/A 4,320 4,752 5,184 5,616 (C) 7307 Tube or pipe fittings "e.g. couplings, elbows, sleeves", of iron or steel see below see below see below see below see below see below   7307 11 Tube or pipe fittings of non-malleable cast iron 3,859 N/A 3,859 4,245 4,631 5,017   7307 19 10 Tube or pipe fittings of cast iron (excl. of non-malleable) 3,859 N/A 3,859 4,245 4,631 5,017   7307 19 90 Cast tube or pipe fittings of steel 4,320 N/A 4,320 4,752 5,184 5,616 (C) 7307 21 00 Flanges of stainless steel (excl. cast products) 4,810 N/A 4,810 5,291 5,772 6,253   7307 22 Threaded elbows, bends and sleeves of stainless steel (excl. cast products) 4,810 N/A 4,810 5,291 5,772 6,253   7307 23 Butt welding tube or pipe fittings of stainless steel (excl. cast products) 4,810 N/A 4,810 5,291 5,772 6,253   7307 29 Tube or pipe fittings of stainless steel (excl. cast products, flanges, threaded elbows, bends and sleeves and butt weldings fittings) 4,810 N/A 4,810 5,291 5,772 6,253   7307 91 00 Flanges of iron or steel (excl. cast or stainless products) 4,280 N/A 4,280 4,708 5,136 5,564 (C) 7307 92 Threaded elbows, bends and sleeves, of stainless steel (excl. cast or stainless products) 4,280 N/A 4,280 4,708 5,136 5,564 (C) 7307 93 Butt welding fittings of iron or steel (excl. cast iron or stainless steel products, and flanges) 4,280 N/A 4,280 4,708 5,136 5,564 (C) 7307 99 Tube or pipe fittings, of iron or steel (excl. cast iron or stainless steel products; flanges; threaded elbows, bends and sleeves; butt welding fittings) 4,280 N/A 4,280 4,708 5,136 5,564 (C) 7308 Structures and parts of structures "e.g., bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns", of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel (excl. prefabricated buildings of heading 9406) 5,930 N/A 5,930 6,523 7,116 7,709 (C) 7309 Reservoirs, tanks, vats and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of > 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated (excl. containers specifically constructed or equipped for one or more types of transport) 6,650 N/A 6,650 7,315 7,980 8,645 (C) 7310 Tanks, casks, drums, cans, boxes and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of <= 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated, n.e.s. 4,310 N/A 4,310 4,741 5,172 5,603 (C) 7311 Containers of iron or steel, for compressed or liquefied gas (excl. containers specifically constructed or equipped for one or more types of transport) see below see below see below see below see below see below   7311 00 Containers of iron or steel, for compressed or liquefied gas (excl. containers specifically constructed or equipped for one or more types of transport) 6,640 N/A 6,640 7,304 7,968 8,632 (C) 7318 Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers, incl. spring washers, and similar articles, of iron or steel (excl. lag screws, stoppers, plugs and the like, threaded) see below see below see below see below see below see below   7318 11 00 Coach screws of iron or steel 4,270 N/A 4,270 4,697 5,124 5,551 (C) 7318 12 10 Wood screws of stainless steel (excl. coach screws) 5,770 N/A 5,770 6,347 6,924 7,501 (C) 7318 12 90 Wood screws of iron or steel other than stainless (excl. coach screws) 4,270 N/A 4,270 4,697 5,124 5,551 (C) 7318 13 00 Screw hooks and screw rings, of iron or steel 4,270 N/A 4,270 4,697 5,124 5,551 (C) 7318 14 10 Self-tapping screws, of stainless steel (excl. wood screws) 5,770 N/A 5,770 6,347 6,924 7,501 (C) 7318 14 91 Spaced-thread screws of iron or steel other than stainless 4,270 N/A 4,270 4,697 5,124 5,551 (C) 7318 14 99 Self-tapping screws of iron or steel other than stainless (excl. spaced-thread screws and wood screws) 4,270 N/A 4,270 4,697 5,124 5,551 (C) 7318 15 Threaded screws and bolts, of iron or steel, whether or not with their nuts and washers (excl. coach screws and other wood screws, screw hooks and screw rings, self-tapping screws, lag screws, stoppers, plugs and the like, threaded) 5,720 N/A 5,720 6,292 6,864 7,436 (C) 7318 16 Nuts of iron or steel 5,140 N/A 5,140 5,654 6,168 6,682 (C) 7318 19 00 Threaded articles, of iron or steel, n.e.s. 4,270 N/A 4,270 4,697 5,124 5,551 (C) 7318 21 00 Spring washers and other lock washers, of iron or steel 4,270 N/A 4,270 4,697 5,124 5,551 (C) 7318 22 00 Washers of iron or steel (excl. spring washers and other lock washers) 5,140 N/A 5,140 5,654 6,168 6,682 (C) 7318 23 00 Rivets of iron or steel (excl. tubular and bifurcated rivets for particular uses) 4,280 N/A 4,280 4,708 5,136 5,564 (C) 7318 24 00 Cotters and cotter pins, of iron or steel 4,270 N/A 4,270 4,697 5,124 5,551 (C) 7318 29 00 Non-threaded articles, of iron or steel 4,270 N/A 4,270 4,697 5,124 5,551 (C) 7326 Articles of iron or steel, n.e.s. (excl. cast articles) see below see below see below see below see below see below   7326 11 00 Grinding balls and similar articles for mills, of iron or steel, forged or stamped, but not further worked 4,910 N/A 4,910 5,401 5,892 6,383 (C) 7326 19 Articles of iron or steel, forged or stamped, but not further worked, n.e.s. (excl. grinding balls and similar articles for mills) 4,910 N/A 4,910 5,401 5,892 6,383 (C) 7326 20 00 Articles of iron or steel wire, n.e.s. 4,910 N/A 4,910 5,401 5,892 6,383 (C) 7326 90 30 Ladders and steps, of iron or steel 4,910 N/A 4,910 5,401 5,892 6,383 (C) 7326 90 40 Pallets and similar platforms for handling goods, of iron or steel 4,910 N/A 4,910 5,401 5,892 6,383 (C) 7326 90 50 Reels for cables, piping and the like, of iron or steel 4,910 N/A 4,910 5,401 5,892 6,383 (C) 7326 90 60 Ventilators, non-mechanical, guttering, hooks and like articles used in the building industry, n.e.s., of iron or steel 4,910 N/A 4,910 5,401 5,892 6,383 (C) 7326 90 92 Articles of iron or steel, open-die forged, n.e.s. 4,910 N/A 4,910 5,401 5,892 6,383 (C) 7326 90 94 Articles of iron or steel, closed-die forged, n.e.s. 4,910 N/A 4,910 5,401 5,892 6,383 (C) 7326 90 96 Sintered articles of iron or steel, n.e.s. 4,910 N/A 4,910 5,401 5,892 6,383 (C) 7326 90 98 Articles of iron or steel, n.e.s. 4,910 N/A 4,910 5,401 5,892 6,383 (C) Indonesia Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 2,060 0,070 2,130 2,151 2,151 2,151   2814 10 00 Anhydrous ammonia 2,050 0,230 2,280 2,303 2,303 2,303   2814 20 00 Ammonia in aqueous solution 0,620 0,070 0,680 0,687 0,687 0,687   2834 21 00 Nitrate of potassium 1,740 0,110 1,860 1,879 1,879 1,879   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,460 0,060 0,520 0,525 0,525 0,525   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,770 0,060 0,830 0,838 0,838 0,838   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,400 0,180 1,580 1,596 1,596 1,596   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,370 0,180 1,540 1,555 1,555 1,555   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,600 0,140 0,740 0,747 0,747 0,747   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,180 0,150 1,330 1,343 1,343 1,343   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,320 0,120 1,440 1,454 1,454 1,454   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,040 0,180 2,220 2,242 2,242 2,242   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,760 0,160 1,920 1,939 1,939 1,939   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,760 0,160 1,920 1,939 1,939 1,939   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 3,220 0,120 3,330 3,363 3,363 3,363   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,710 0,160 1,870 1,889 1,889 1,889   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,350 0,140 1,490 1,505 1,505 1,505   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,440 0,170 1,610 1,626 1,626 1,626   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,690 0,140 0,830 0,838 0,838 0,838   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,870 0,160 1,040 1,050 1,050 1,050   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,600 0,130 0,720 0,727 0,727 0,727   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,480 0,100 0,580 0,586 0,586 0,586   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,310 0,080 0,390 0,394 0,394 0,394   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,200 0,200 1,400 1,414 1,414 1,414   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,560 0,150 0,710 0,717 0,717 0,717   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,160 0,120 1,280 1,293 1,293 1,293   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,600 0,090 0,680 0,687 0,687 0,687   Aluminium         10 % mark-up 20 % mark-up 30 % mark-up   7601 Unwrought aluminium 1,700 N/A 1,700 1,870 2,040 2,210 (K) 7603 Aluminium powders and flakes 1,830 N/A 1,830 2,013 2,196 2,379 (K) 7604 10 10 Bars and rods 2,060 N/A 2,060 2,266 2,472 2,678 (K) 7604 10 90 Profiles 2,070 N/A 2,070 2,277 2,484 2,691 (K) 7604 21 00 Hollow profiles 2,070 N/A 2,070 2,277 2,484 2,691 (K) 7604 29 10 Bars and rods 2,060 N/A 2,060 2,266 2,472 2,678 (K) 7604 29 90 Profiles 2,070 N/A 2,070 2,277 2,484 2,691 (K) 7605 Aluminium wire 2,060 N/A 2,060 2,266 2,472 2,678 (K) 7606 Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm 2,510 N/A 2,510 2,761 3,012 3,263 (K) 7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm 2,510 N/A 2,510 2,761 3,012 3,263 (K) 7608 Aluminium tubes and pipes 2,070 N/A 2,070 2,277 2,484 2,691 (K) 7609 00 00 Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) 2,070 N/A 2,070 2,277 2,484 2,691 (K) 7610 10 00 Doors, windows and their frames and thresholds for doors 2,070 N/A 2,070 2,277 2,484 2,691 (K) 7610 90 Other 2,070 N/A 2,070 2,277 2,484 2,691 (K) 7610 90 10 Bridges and bridge-sections, towers and lattice masts 2,070 N/A 2,070 2,277 2,484 2,691 (K) 7610 90 90 Other 2,070 N/A 2,070 2,277 2,484 2,691 (K) 7611 00 00 Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 2,510 N/A 2,510 2,761 3,012 3,263 (K) 7612 Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 2,510 N/A 2,510 2,761 3,012 3,263 (K) 7613 00 00 Aluminium containers for compressed or liquefied gas 2,510 N/A 2,510 2,761 3,012 3,263 (K) 7614 Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated 2,060 N/A 2,060 2,266 2,472 2,678 (K) 7616 10 00 Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles 2,510 N/A 2,510 2,761 3,012 3,263 (K) 7616 91 00 Cloth, grill, netting and fencing, of aluminium wire 2,510 N/A 2,510 2,761 3,012 3,263 (K) 7616 99 10 Cast 1,830 N/A 1,830 2,013 2,196 2,379 (K) 7616 99 90 Other 2,510 N/A 2,510 2,761 3,012 3,263 (K) Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066   Iron and steel         10 % mark-up 20 % mark-up 30 % mark-up   2601 12 00 Agglomerated iron ores and concentrates (excl. roasted iron pyrites) - - - - - -   7201 Pig iron and spiegeleisen, in pigs, blocks or other primary forms 7,920 N/A 7,920 8,712 9,504 10,296   7202 11 Ferro-manganese, containing by weight > 2% of carbon 1,690 N/A 1,690 1,859 2,028 2,197   7202 19 Ferro-manganese, containing by weight <= 2% carbon – N/A – _ _ _   7202 41 Ferro-chromium, containing by weight > 4% of carbon – N/A – _ _ _   7202 49 Ferro-chromium, containing by weight <= 4% of carbon – N/A – _ _ _   7202 60 00 Ferro-nickel 6,150 N/A 6,150 6,765 7,380 7,995   7203 Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99,94%, in lumps, pellets or similar forms – N/A – _ _ _   7205 Granules and powders of pig iron, spiegeleisen, iron or steel (excl. granules and powders of ferro-alloys, turnings and filings of iron or steel, radioactive iron powders "isotopes" and certain low-calibre, substandard balls for ballbearings) 7,900 N/A 7,900 8,690 9,480 10,270 (C) 7206 Iron and non-alloy steel in ingots or other primary forms (excl. remelting scrap ingots, products obtained by continuous casting and iron of heading 7203) see below see below see below see below see below see below   7206 10 00 Ingots, of iron and non-alloy steel (excl. remelted scrap ingots, continuous cast products, iron of heading 7203) 8,210 N/A 8,210 9,031 9,852 10,673 (C) 7206 90 00 Iron and non-alloy steel, in puddled bars or other primary forms (excl. ingots, remelted scrap ingots, continuous cast products, iron of heading 7203) 8,210 N/A 8,210 9,031 9,852 10,673 (C) 7207 Semi-finished products of iron or non-alloy steel see below see below see below see below see below see below   7207 11 11 Semi-finished products, of non-alloy free-cutting steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting 8,230 N/A 8,230 9,053 9,876 10,699 (C) 7207 11 14 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness of <= 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel) 8,230 N/A 8,230 9,053 9,876 10,699 (C) 7207 11 16 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness of > 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel) 8,230 N/A 8,230 9,053 9,876 10,699 (C) 7207 11 90 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular cross-section, the width < twice the thickness, forged 8,210 N/A 8,210 9,031 9,852 10,673 (C) 7207 12 10 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtained by continuous casting 8,230 N/A 8,230 9,053 9,876 10,699 (C) 7207 12 90 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular "other than square" cross-section, the width >= twice the thickness, forged 8,210 N/A 8,210 9,031 9,852 10,673 (C) 7207 19 12 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting 8,230 N/A 8,230 9,053 9,876 10,699 (C) 7207 19 19 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, forged 8,210 N/A 8,210 9,031 9,852 10,673 (C) 7207 19 80 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon (excl. semi-products, of square, rectangular, circular or polygonal cross-section) 8,230 N/A 8,230 9,053 9,876 10,699 (C) 7207 20 11 Semi-finished products, of non-alloy free-cutting steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting 8,230 N/A 8,230 9,053 9,876 10,699 (C) 7207 20 15 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% but < 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel) 8,230 N/A 8,230 9,053 9,876 10,699 (C) 7207 20 17 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel) 8,230 N/A 8,230 9,053 9,876 10,699 (C) 7207 20 19 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, forged 8,210 N/A 8,210 9,031 9,852 10,673 (C) 7207 20 32 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtained by continuous casting 8,230 N/A 8,230 9,053 9,876 10,699 (C) 7207 20 39 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of rectangular "other than square" cross-section and the width >= twice the thickness, forged 8,210 N/A 8,210 9,031 9,852 10,673 (C) 7207 20 52 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting 8,230 N/A 8,230 9,053 9,876 10,699 (C) 7207 20 59 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of circular or polygonal cross-section, forged 8,210 N/A 8,210 9,031 9,852 10,673 (C) 7207 20 80 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon (excl. those of square, rectangular, circular or polygonal cross-section) 8,230 N/A 8,230 9,053 9,876 10,699 (C) 7208 Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled, not clad, plated or coated 8,230 N/A 8,230 9,053 9,876 10,699 (C) 7209 Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, cold-rolled "cold-reduced", not clad, plated or coated 8,250 N/A 8,250 9,075 9,900 10,725 (C) 7210 Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated 8,250 N/A 8,250 9,075 9,900 10,725 (C) 7211 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", not clad, plated or coated see below see below see below see below see below see below   7211 13 00 Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as "wide flats" 8,230 N/A 8,230 9,053 9,876 10,699 (C) 7211 14 00 Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, not further worked than hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm (excl. "wide flats") 8,230 N/A 8,230 9,053 9,876 10,699 (C) 7211 19 00 Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, simply hot-rolled, not clad, plated or coated, of a thickness < 4,75 mm (excl. "wide flats") 8,230 N/A 8,230 9,053 9,876 10,699 (C) 7211 23 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight < 0,25% of carbon 8,250 N/A 8,250 9,075 9,900 10,725 (C) 7211 29 00 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight >= 0,25% of carbon 8,250 N/A 8,250 9,075 9,900 10,725 (C) 7211 90 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked, but not clad, plated or coated 8,250 N/A 8,250 9,075 9,900 10,725 (C) 7212 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated 8,250 N/A 8,250 9,075 9,900 10,725 (C) 7213 Bars and rods of iron or non-alloy steel, hot-rolled, in irregularly wound coils 8,230 N/A 8,230 9,053 9,876 10,699 (C) 7214 Bars and rods, of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but incl. those twisted after rolling (excl. in irregularly wound coils) see below see below see below see below see below see below   7214 10 00 Bars and rods, of iron or non-alloy steel, not further worked than forged (excl. in irregularly wound coils) 8,210 N/A 8,210 9,031 9,852 10,673 (C) 7214 20 00 Bars and rods, of iron or non-alloy steel, with indentations, ribs, groves or other deformations produced during the rolling process 8,230 N/A 8,230 9,053 9,876 10,699 (C) 7214 30 00 Bars and rods, of non-alloy free-cutting steel, not further worked than hot-rolled, hot-drawn or hot-extruded (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling) 8,230 N/A 8,230 9,053 9,876 10,699 (C) 7214 91 Bars and rods, of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, of rectangular "other than square" cross-section (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process, bars and rods twisted after rolling and free-cutting steel) 8,230 N/A 8,230 9,053 9,876 10,699 (C) 7214 99 Bars and rods, of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded (excl. of rectangular [other than square] cross-section and those containing indentations, ribs, grooves or other deformations produced during the rolling process, and of non-alloy free-cutting steel) 8,230 N/A 8,230 9,053 9,876 10,699 (C) 7215 Bars and rods, of iron or non-alloy steel, cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked, n.e.s. 8,230 N/A 8,230 9,053 9,876 10,699 (C) 7216 Angles, shapes and sections of iron or non-alloy steel, n.e.s. 8,230 N/A 8,230 9,053 9,876 10,699 (C) 7217 Wire of iron or non-alloy steel, in coils (excl. bars and rods) see below see below see below see below see below see below   7217 10 Wire of iron or non-alloy steel, in coils, not plated or coated, whether or not polished (excl. bars and rods) 8,230 N/A 8,230 9,053 9,876 10,699 (C) 7217 20 Wire of iron or non-alloy steel, in coils, plated or coated with zinc (excl. bars and rods) 8,230 N/A 8,230 9,053 9,876 10,699 (C) 7217 30 Wire of iron or non-alloy steel, in coils, plated or coated with base metals (excl. plated or coated with zinc, and bars and rods) 8,230 N/A 8,230 9,053 9,876 10,699 (C) 7217 90 Wire of iron or non-alloy steel, in coils, plated or coated (excl. plated or coated with base metals, and bars and rods) 8,230 N/A 8,230 9,053 9,876 10,699 (C) 7218 Stainless steel in ingots or other primary forms (excl. remelting scrap ingots and products obtained by continuous casting); semi-finished products of stainless steel see below see below see below see below see below see below   7218 10 00 Steel, stainless, in ingots and other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) 8,630 N/A 8,630 9,493 10,356 11,219   7218 91 Semi-finished products of stainless steel, of rectangular "other than square" cross-section 8,670 N/A 8,670 9,537 10,404 11,271   7218 99 11 Semi-finished products of stainless steel, of square cross-section, rolled or obtained by continuous casting 8,670 N/A 8,670 9,537 10,404 11,271   7218 99 19 Semi-finished products of stainless steel, of square cross-section, forged 8,630 N/A 8,630 9,493 10,356 11,219   7218 99 20 Semi-finished products of stainless steel, of circular cross-section or of cross-section other than square or rectangular, rolled or obtained by continuous casting 8,670 N/A 8,670 9,537 10,404 11,271   7218 99 80 Semi-finished products of stainless steel, forged (excl. products of square or rectangular cross-section) 8,630 N/A 8,630 9,493 10,356 11,219   7219 Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7219 11 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of > 10 mm 8,670 N/A 8,670 9,537 10,404 11,271   7219 12 Flat-rolled products of stainless steel, of a width of>= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 4,7 mm and <= 10 mm 8,670 N/A 8,670 9,537 10,404 11,271   7219 13 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 3 mm and < 4,75 mm 8,670 N/A 8,670 9,537 10,404 11,271   7219 14 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of < 3 mm 8,670 N/A 8,670 9,537 10,404 11,271   7219 21 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of > 10 mm 8,670 N/A 8,670 9,537 10,404 11,271   7219 22 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 4,75 mm and <= 10 mm 8,670 N/A 8,670 9,537 10,404 11,271   7219 23 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 3 mm and < 4,75 mm 8,670 N/A 8,670 9,537 10,404 11,271   7219 24 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of < 3 mm 8,670 N/A 8,670 9,537 10,404 11,271   7219 31 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 4,75 mm 8,690 N/A 8,690 9,559 10,428 11,297   7219 32 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 3 mm but < 4,75 mm 8,690 N/A 8,690 9,559 10,428 11,297   7219 33 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of > 1 mm but < 3 mm 8,690 N/A 8,690 9,559 10,428 11,297   7219 34 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 0,5 mm but <= 1 mm 8,690 N/A 8,690 9,559 10,428 11,297   7219 35 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of < 0,5 mm 8,690 N/A 8,690 9,559 10,428 11,297   7219 90 Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked 8,690 N/A 8,690 9,559 10,428 11,297   7220 Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7220 11 00 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of >= 4,75 mm 8,670 N/A 8,670 9,537 10,404 11,271   7220 12 00 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of < 4,75 mm 8,670 N/A 8,670 9,537 10,404 11,271   7220 20 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" 8,690 N/A 8,690 9,559 10,428 11,297   7220 90 Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked 8,690 N/A 8,690 9,559 10,428 11,297   7221 Bars and rods of stainless steel, hot-rolled, in irregularly wound coils 8,690 N/A 8,690 9,559 10,428 11,297   7222 Other bars and rods of stainless steel; angles, shapes and sections of stainless steel, n.e.s. see below see below see below see below see below see below   7222 11 Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only hot-extruded, of circular cross-section 8,690 N/A 8,690 9,559 10,428 11,297   7222 19 Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only extruded (excl. of circular cross-section) 8,690 N/A 8,690 9,559 10,428 11,297   7222 20 Other bars and rods of stainless steel, not further worked than cold-formed or cold-finished 8,690 N/A 8,690 9,559 10,428 11,297   7222 30 Other bars and rods of stainless steel, cold-formed or cold-finished and further worked, or not further worked than forged, or forged, or hot-formed by other means and further worked, n.e.s. 8,630 N/A 8,630 9,493 10,356 11,219   7222 40 Angles, shapes and sections of stainless steel, n.e.s. 8,690 N/A 8,690 9,559 10,428 11,297   7223 Wire of stainless steel, in coils (excl. bars and rods) see below see below see below see below see below see below   7223 00 Wire of stainless steel, in coils (excl. bars and rods) 8,690 N/A 8,690 9,559 10,428 11,297   7224 Steel, alloy, other than stainless, in ingots or other primary forms, semi-finished products of alloy steel other than stainless (excl. waste and scrap in ingot form, and products obtained by continuous casting) see below see below see below see below see below see below   7224 10 Steel, alloy, other than stainless, in ingots or other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) 9,960 N/A 9,960 10,956 11,952 12,948 (F) 7224 90 02 Semi-finished products of tool steel 10 N/A 10 11 12 13 (F) 7224 90 03 Semi-finished products of high-speed steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting the width measuring < twice the thickness 10 N/A 10 11 12 13 (F) 7224 90 05 Semi-finished products of steel containing by weight <= 0,7% of carbon, 0,5% to 1,2% of manganese, 0,6% to 2,3% of silicon, or of steel containing by weight >= 0,0008% of boron with any other element < the minimum content referred to in Note 1 f to chapter 72, of square or rectangular cross-section, hot rolled or obtained by continuous casting, the width measuring < twice the thickness 10 N/A 10 11 12 13 (F) 7224 90 07 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring < twice the thickness (excl. of tool steel, high-speed steel and articles of subheading 7224.90.05) 10 N/A 10 11 12 13 (F) 7224 90 14 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring >= twice the thickness (excl. of tool steel) 10 N/A 10 11 12 13 (F) 7224 90 18 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, forged (excl. of tool steel) 9,960 N/A 9,960 10,956 11,952 12,948 (F) 7224 90 31 Semi-finished products of steel containing by weight 0,9% to 1,15% carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting 10 N/A 10 11 12 13 (F) 7224 90 38 Semi-finished products of alloy steel, other than stainless steel, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting (excl. of tool steel and products containing by weight 0,9% to 1,15% of carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum) 10 N/A 10 11 12 13 (F) 7224 90 90 Semi-finished products of alloy steel, other than stainless steel, forged (excl. of tool steel and products of square or rectangular, circular or polygamol cross-section) 9,960 N/A 9,960 10,956 11,952 12,948 (F) 7225 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7225 11 00 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, grain-oriented 13,240 N/A 13,240 14,564 15,888 17,212 (C) 7225 19 10 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, hot-rolled 10 N/A 10 11 12 13 (C) 7225 19 90 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, cold-rolled "cold-reduced", non-grain-oriented 10,020 N/A 10,020 11,022 12,024 13,026 (F) 7225 30 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, in coils (excl. products of silicon-electrical steel) 10 N/A 10 11 12 13 (F) 7225 40 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, not in coils (excl. products of silicon-electrical steel) 10 N/A 10 11 12 13 (F) 7225 50 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of silicon-electrical steel) 10,020 N/A 10,020 11,022 12,024 13,026 (F) 7225 91 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and electrolytically plated or coated with zinc (excl. products of silicon-electrical steel) 10,020 N/A 10,020 11,022 12,024 13,026 (F) 7225 92 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and plated or coated with zinc (excl. electrolytically plated or coated and products of silicon-electrical steel) 10,020 N/A 10,020 11,022 12,024 13,026 (F) 7225 99 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. plated or coated with zinc and products of silicon-electrical steel) 10,020 N/A 10,020 11,022 12,024 13,026 (F) 7226 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7226 11 00 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", grain-oriented 13,240 N/A 13,240 14,564 15,888 17,212 (C) 7226 19 10 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, not further worked than hot-rolled 10 N/A 10 11 12 13 (C) 7226 19 80 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, cold-rolled "cold-reduced", whether or not further worked, or hot-rolled and further worked, non-grain-oriented 10,020 N/A 10,020 11,022 12,024 13,026 (F) 7226 20 00 Flat-rolled products of high-speed steel, of a width of <= 600 mm, hot-rolled or cold-rolled "cold-reduced" 10 N/A 10 11 12 13 (F) 7226 91 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than hot-rolled (excl. products of high-speed steel or silicon-electrical steel) 10 N/A 10 11 12 13 (F) 7226 92 00 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of high-speed steel or silicon-electrical steel) 10,020 N/A 10,020 11,022 12,024 13,026 (F) 7226 99 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. products of high-speed steel or silicon-electrical steel) 10,020 N/A 10,020 11,022 12,024 13,026 (F) 7227 Bars and rods of alloy steel other than stainless, hot-rolled, in irregularly wound coils 10,020 N/A 10,020 11,022 12,024 13,026 (C)/(F) 7228 Other bars and rods of alloy steel other than stainless, angles, shapes and sections of alloy steel other than stainless, n.e.s.; hollow drill bars and rods, of alloy or non-alloy steel see below see below see below see below see below see below   7228 10 20 Bars and rods of high-speed steel, not further worked than hot-rolled, hot-drawn or extruded, and hot-rolled, hot-drawn or extruded, not further worked than clad (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 10,020 N/A 10,020 11,022 12,024 13,026 (F) 7228 10 50 Bars and rods of high-speed steel, forged (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 9,960 N/A 9,960 10,956 11,952 12,948 (F) 7228 10 90 Bars and rods of high-speed steel, not further worked than cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked (excl. forged products, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 10,020 N/A 10,020 11,022 12,024 13,026 (F) 7228 20 Bars and rods of silico-manganese steel (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 10,020 N/A 10,020 11,022 12,024 13,026 (F) 7228 30 Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 10,020 N/A 10,020 11,022 12,024 13,026 (C)/(F) 7228 40 Bars and rods of alloy steel other than stainless, not further worked than forged (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 9,960 N/A 9,960 10,956 11,952 12,948 (F) 7228 50 Bars and rods of alloy steel other than stainless, not further worked than cold-formed or cold-finished (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 10,020 N/A 10,020 11,022 12,024 13,026 (C)/(F) 7228 60 Bars and rods of alloy steel other than stainless, cold-formed or cold-finished and further worked or hot-formed and further worked, n.e.s. (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 10,020 N/A 10,020 11,022 12,024 13,026 (F) 7228 70 Angles, shapes and sections of alloy steel other than stainless, n.e.s. 10,020 N/A 10,020 11,022 12,024 13,026 (F) 7228 80 00 Hollow drill bars and rods, of alloy or non-alloy steel 10,020 N/A 10,020 11,022 12,024 13,026 (F) 7229 Wire of alloy steel other than stainless, in coils (excl. bars and rods) 10,020 N/A 10,020 11,022 12,024 13,026 (C)/(F) 7301 Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel 8,250 N/A 8,250 9,075 9,900 10,725 (C) 7302 Railway or tramway track construction material of iron or steel, the following : rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers "cross-ties", fish-plates, chairs, chair wedges, sole plates "base plates", rail clips, bedplates, ties and other material specialised for jointing or fixing rails 8,210 N/A 8,210 9,031 9,852 10,673 (C) 7303 Tubes, pipes and hollow profiles, of cast iron see below see below see below see below see below see below   7303 00 Tubes, pipes and hollow profiles, of cast iron 7,890 N/A 7,890 8,679 9,468 10,257   7304 Tubes, pipes and hollow profiles, seamless, of iron or steel (excl. products of cast iron) see below N/A see below _ _ _   7304 11 00 Line pipe of a kind used for oil or gas pipelines, seamless, of stainless steel 8,630 N/A 8,630 9,493 10,356 11,219   7304 19 Line pipe of a kind used for oil or gas pipelines, seamless, of iron or steel (excl. products of stainless steel or of cast iron) 8,210 N/A 8,210 9,031 9,852 10,673 (C) 7304 22 00 Drill pipe, seamless, of stainless steel, of a kind used in drilling for oil or gas 8,630 N/A 8,630 9,493 10,356 11,219   7304 23 00 Drill pipe, seamless, of a kind used in drilling for oil or gas, of iron or steel (excl. products of stainless steel or of cast iron) 8,210 N/A 8,210 9,031 9,852 10,673 (C) 7304 24 00 Casing and tubing, seamless, of a kind used for drilling for oil or gas, of stainless steel 8,630 N/A 8,630 9,493 10,356 11,219   7304 29 Casing and tubing, seamless, of iron or steel, of a kind used in drilling for oil or gas (excl. products of cast iron) 8,210 N/A 8,210 9,031 9,852 10,673 (C) 7304 31 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" (excl. cast iron products and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used for drilling for oil or gas) 8,210 N/A 8,210 9,031 9,852 10,673 (C) 7304 39 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, not cold-drawn or cold-rolled "cold-reduced" (excl. cast iron products, line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas) 8,210 N/A 8,210 9,031 9,852 10,673 (C) 7304 41 00 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas) 8,630 N/A 8,630 9,493 10,356 11,219   7304 49 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines or of a kind used for drilling for oil or gas) 8,630 N/A 8,630 9,493 10,356 11,219   7304 51 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil) 7,860 N/A 7,860 8,646 9,432 10,218 (F) 7304 59 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil) 7,860 N/A 7,860 8,646 9,432 10,218 (C)/(F) 7304 90 00 Tubes, pipes and hollow profiles, seamless, of non-circular cross-section, of iron or steel (excl. products of cast iron) 8,210 N/A 8,210 9,031 9,852 10,673 (C) 7305 Tubes and pipes, having circular cross-sections and an external diameter of > 406,4 mm, of flat-rolled products of iron or steel "e.g., welded, riveted or similarly closed" 8,250 N/A 8,250 9,075 9,900 10,725 (C) 7306 Tubes, pipes and hollow profiles "e.g., open seam or welded, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless tubes and pipes and tubes having internal and external circular cross-sections and an external diameter of > 406,4 mm) see below see below see below see below see below see below   7306 11 00 Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm 8,690 N/A 8,690 9,559 10,428 11,297   7306 19 00 Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron) 8,250 N/A 8,250 9,075 9,900 10,725 (C) 7306 21 00 Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm 8,690 N/A 8,690 9,559 10,428 11,297   7306 29 00 Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron) 8,250 N/A 8,250 9,075 9,900 10,725 (C) 7306 30 12 Precision tubes, welded, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" 8,250 N/A 8,250 9,075 9,900 10,725 (C) 7306 30 18 Precision tubes, welded, of circular cross-section, of iron or non-alloy steel (excl. cold-drawn or cold-rolled) 8,230 N/A 8,230 9,053 9,876 10,699   7306 30 41 Threaded or threadable tubes "gas pipe", welded, of circular cross-section, of iron or non-alloy steel, plated or coated with zinc 8,250 N/A 8,250 9,075 9,900 10,725 (C) 7306 30 49 Threaded or threadable tubes "gas pipe", welded, of circular cross-section, of iron or non-alloy steel (excl. products plated or coated with zinc) 8,250 N/A 8,250 9,075 9,900 10,725 (C) 7306 30 72 Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel, of an external diameter of <= 168,3 mm, plated or coated with zinc (excl. line pipe of a kind used for oil or gas pipelines or casing and tubingof a kind used in drilling for oil or gas) 8,250 N/A 8,250 9,075 9,900 10,725 (C) 7306 30 77 Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel of an external diameter of <= 168,3 mm (excl. plated or coated with zinc and line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used in drilling for oil or gas, precision tubes and threaded or threadable tubes "gas pipe") 8,250 N/A 8,250 9,075 9,900 10,725 (C) 7306 30 80 Tubes, pipes and hollow profiles, welded, having a circular cross-section, of iron or steel, of an external diameter of > 168,3 mm but <= 406,4 mm (excl. line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, or precision steel tubes, electrical conduit tubes or threaded or threadable tubes "gas pipe") 8,250 N/A 8,250 9,075 9,900 10,725 (C) 7306 40 20 Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. products having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) 8,690 N/A 8,690 9,559 10,428 11,297   7306 40 80 Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel (excl. products cold-drawn or cold-rolled "cold-reduced", tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) 8,670 N/A 8,670 9,537 10,404 11,271   7306 50 21 Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" 7,960 N/A 7,960 8,756 9,552 10,348 (F) 7306 50 29 Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless (excl. cold-drawn or cold-rolled) 7,940 N/A 7,940 8,734 9,528 10,322 (F) 7306 50 80 Tubes, pipes and hollow profiles, welded, of circular cross-section, of alloy steel other than stainless (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and precision steel tubes) 7,960 N/A 7,960 8,756 9,552 10,348 (F) 7306 61 10 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel 8,690 N/A 8,690 9,559 10,428 11,297   7306 61 92 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of <= 2 mm 8,250 N/A 8,250 9,075 9,900 10,725 (C) 7306 61 99 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of > 2 mm 8,250 N/A 8,250 9,075 9,900 10,725 (C) 7306 69 10 Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) 8,690 N/A 8,690 9,559 10,428 11,297   7306 69 90 Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of iron or steel other than stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) 8,250 N/A 8,250 9,075 9,900 10,725 (C) 7306 90 00 Tubes, pipes and hollow profiles "e.g., open seam, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless or welded tubes and pipes and tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm) 8,250 N/A 8,250 9,075 9,900 10,725 (C) 7307 Tube or pipe fittings "e.g. couplings, elbows, sleeves", of iron or steel see below see below see below see below see below see below   7307 11 Tube or pipe fittings of non-malleable cast iron 7,890 N/A 7,890 8,679 9,468 10,257   7307 19 10 Tube or pipe fittings of cast iron (excl. of non-malleable) 7,890 N/A 7,890 8,679 9,468 10,257   7307 19 90 Cast tube or pipe fittings of steel 8,210 N/A 8,210 9,031 9,852 10,673 (C) 7307 21 00 Flanges of stainless steel (excl. cast products) 7,940 N/A 7,940 8,734 9,528 10,322   7307 22 Threaded elbows, bends and sleeves of stainless steel (excl. cast products) 7,940 N/A 7,940 8,734 9,528 10,322   7307 23 Butt welding tube or pipe fittings of stainless steel (excl. cast products) 7,940 N/A 7,940 8,734 9,528 10,322   7307 29 Tube or pipe fittings of stainless steel (excl. cast products, flanges, threaded elbows, bends and sleeves and butt weldings fittings) 7,940 N/A 7,940 8,734 9,528 10,322   7307 91 00 Flanges of iron or steel (excl. cast or stainless products) 8,210 N/A 8,210 9,031 9,852 10,673 (C) 7307 92 Threaded elbows, bends and sleeves, of stainless steel (excl. cast or stainless products) 8,210 N/A 8,210 9,031 9,852 10,673 (C) 7307 93 Butt welding fittings of iron or steel (excl. cast iron or stainless steel products, and flanges) 8,210 N/A 8,210 9,031 9,852 10,673 (C) 7307 99 Tube or pipe fittings, of iron or steel (excl. cast iron or stainless steel products; flanges; threaded elbows, bends and sleeves; butt welding fittings) 8,210 N/A 8,210 9,031 9,852 10,673 (C) 7308 Structures and parts of structures "e.g., bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns", of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel (excl. prefabricated buildings of heading 9406) 8,250 N/A 8,250 9,075 9,900 10,725 (C) 7309 Reservoirs, tanks, vats and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of > 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated (excl. containers specifically constructed or equipped for one or more types of transport) 10,010 N/A 10,010 11,011 12,012 13,013 (C) 7310 Tanks, casks, drums, cans, boxes and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of <= 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated, n.e.s. 8,250 N/A 8,250 9,075 9,900 10,725 (C) 7311 Containers of iron or steel, for compressed or liquefied gas (excl. containers specifically constructed or equipped for one or more types of transport) see below see below see below see below see below see below   7311 00 Containers of iron or steel, for compressed or liquefied gas (excl. containers specifically constructed or equipped for one or more types of transport) 9,980 N/A 9,980 10,978 11,976 12,974 (C) 7318 Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers, incl. spring washers, and similar articles, of iron or steel (excl. lag screws, stoppers, plugs and the like, threaded) see below see below see below see below see below see below   7318 11 00 Coach screws of iron or steel 8,230 N/A 8,230 9,053 9,876 10,699 (C) 7318 12 10 Wood screws of stainless steel (excl. coach screws) 8,650 N/A 8,650 9,515 10,380 11,245 (C) 7318 12 90 Wood screws of iron or steel other than stainless (excl. coach screws) 8,230 N/A 8,230 9,053 9,876 10,699 (C) 7318 13 00 Screw hooks and screw rings, of iron or steel 8,230 N/A 8,230 9,053 9,876 10,699 (C) 7318 14 10 Self-tapping screws, of stainless steel (excl. wood screws) 8,650 N/A 8,650 9,515 10,380 11,245 (C) 7318 14 91 Spaced-thread screws of iron or steel other than stainless 8,230 N/A 8,230 9,053 9,876 10,699 (C) 7318 14 99 Self-tapping screws of iron or steel other than stainless (excl. spaced-thread screws and wood screws) 8,230 N/A 8,230 9,053 9,876 10,699 (C) 7318 15 Threaded screws and bolts, of iron or steel, whether or not with their nuts and washers (excl. coach screws and other wood screws, screw hooks and screw rings, self-tapping screws, lag screws, stoppers, plugs and the like, threaded) 8,230 N/A 8,230 9,053 9,876 10,699 (C) 7318 16 Nuts of iron or steel 8,540 N/A 8,540 9,394 10,248 11,102 (C) 7318 19 00 Threaded articles, of iron or steel, n.e.s. 8,230 N/A 8,230 9,053 9,876 10,699 (C) 7318 21 00 Spring washers and other lock washers, of iron or steel 8,230 N/A 8,230 9,053 9,876 10,699 (C) 7318 22 00 Washers of iron or steel (excl. spring washers and other lock washers) 8,540 N/A 8,540 9,394 10,248 11,102 (C) 7318 23 00 Rivets of iron or steel (excl. tubular and bifurcated rivets for particular uses) 8,230 N/A 8,230 9,053 9,876 10,699 (C) 7318 24 00 Cotters and cotter pins, of iron or steel 8,230 N/A 8,230 9,053 9,876 10,699 (C) 7318 29 00 Non-threaded articles, of iron or steel 8,230 N/A 8,230 9,053 9,876 10,699 (C) 7326 Articles of iron or steel, n.e.s. (excl. cast articles) see below see below see below see below see below see below   7326 11 00 Grinding balls and similar articles for mills, of iron or steel, forged or stamped, but not further worked 8,210 N/A 8,210 9,031 9,852 10,673 (C) 7326 19 Articles of iron or steel, forged or stamped, but not further worked, n.e.s. (excl. grinding balls and similar articles for mills) 8,210 N/A 8,210 9,031 9,852 10,673 (C) 7326 20 00 Articles of iron or steel wire, n.e.s. 8,230 N/A 8,230 9,053 9,876 10,699 (C) 7326 90 30 Ladders and steps, of iron or steel 8,230 N/A 8,230 9,053 9,876 10,699 (C) 7326 90 40 Pallets and similar platforms for handling goods, of iron or steel 8,230 N/A 8,230 9,053 9,876 10,699 (C) 7326 90 50 Reels for cables, piping and the like, of iron or steel 8,230 N/A 8,230 9,053 9,876 10,699 (C) 7326 90 60 Ventilators, non-mechanical, guttering, hooks and like articles used in the building industry, n.e.s., of iron or steel 8,230 N/A 8,230 9,053 9,876 10,699 (C) 7326 90 92 Articles of iron or steel, open-die forged, n.e.s. 8,210 N/A 8,210 9,031 9,852 10,673 (C) 7326 90 94 Articles of iron or steel, closed-die forged, n.e.s. 8,210 N/A 8,210 9,031 9,852 10,673 (C) 7326 90 96 Sintered articles of iron or steel, n.e.s. 8,210 N/A 8,210 9,031 9,852 10,673 (C) 7326 90 98 Articles of iron or steel, n.e.s. 8,250 N/A 8,250 9,075 9,900 10,725 (C) Iran Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – – – –   2523 10 00 White clinker 1,320 0,050 1,380 1,518 1,656 1,794 (B) 2523 10 00 Grey clinker – – – – – –   2523 21 00 White Portland cement 1,320 0,140 1,460 1,606 1,752 1,898   2523 29 00 Grey Portland cement – – – – – –   2523 90 00 White hydraulic cements 1,350 0,180 1,530 1,683 1,836 1,989 (B) 2523 90 00 Grey hydraulic cements – – – – – –   2523 30 00 Aluminous cement – – – – – –   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 2,450 0,040 2,490 2,515 2,515 2,515   2814 10 00 Anhydrous ammonia 1,960 0,120 2,080 2,101 2,101 2,101   2814 20 00 Ammonia in aqueous solution 0,590 0,040 0,620 0,626 0,626 0,626   2834 21 00 Nitrate of potassium 1,980 0,060 2,040 2,060 2,060 2,060   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,450 0,030 0,480 0,485 0,485 0,485   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,740 0,030 0,780 0,788 0,788 0,788   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,350 0,100 1,450 1,465 1,465 1,465   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,320 0,100 1,420 1,434 1,434 1,434   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,580 0,080 0,660 0,667 0,667 0,667   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,280 0,080 1,370 1,384 1,384 1,384   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,500 0,060 1,570 1,586 1,586 1,586   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,310 0,100 2,410 2,434 2,434 2,434   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,990 0,090 2,080 2,101 2,101 2,101   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,990 0,090 2,080 2,101 2,101 2,101   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 3,820 0,060 3,880 3,919 3,919 3,919   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,940 0,090 2,030 2,050 2,050 2,050   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,460 0,080 1,540 1,555 1,555 1,555   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,510 0,090 1,600 1,616 1,616 1,616   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,740 0,080 0,820 0,828 0,828 0,828   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,980 0,090 1,070 1,081 1,081 1,081   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,660 0,070 0,730 0,737 0,737 0,737   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,460 0,060 0,520 0,525 0,525 0,525   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,300 0,040 0,340 0,343 0,343 0,343   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,340 0,120 1,460 1,475 1,475 1,475   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,540 0,100 0,640 0,646 0,646 0,646   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,310 0,070 1,380 1,394 1,394 1,394   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,670 0,050 0,720 0,727 0,727 0,727   Aluminium         10 % mark-up 20 % mark-up 30 % mark-up   7601 Unwrought aluminium 1,700 N/A 1,700 1,870 2,040 2,210 (K) 7603 Aluminium powders and flakes 1,810 N/A 1,810 1,991 2,172 2,353 (K) 7604 10 10 Bars and rods 2,030 N/A 2,030 2,233 2,436 2,639 (K) 7604 10 90 Profiles 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7604 21 00 Hollow profiles 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7604 29 10 Bars and rods 2,030 N/A 2,030 2,233 2,436 2,639 (K) 7604 29 90 Profiles 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7605 Aluminium wire 2,030 N/A 2,030 2,233 2,436 2,639 (K) 7606 Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7608 Aluminium tubes and pipes 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7609 00 00 Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7610 10 00 Doors, windows and their frames and thresholds for doors 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7610 90 Other 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7610 90 10 Bridges and bridge-sections, towers and lattice masts 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7610 90 90 Other 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7611 00 00 Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7612 Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7613 00 00 Aluminium containers for compressed or liquefied gas 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7614 Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated 2,030 N/A 2,030 2,233 2,436 2,639 (K) 7616 10 00 Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7616 91 00 Cloth, grill, netting and fencing, of aluminium wire 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7616 99 10 Cast 1,810 N/A 1,810 1,991 2,172 2,353 (K) 7616 99 90 Other 2,490 N/A 2,490 2,739 2,988 3,237 (K) Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 14,030 N/A 14,030 15,433 16,836 18,239   Iron and steel         10 % mark-up 20 % mark-up 30 % mark-up   2601 12 00 Agglomerated iron ores and concentrates (excl. roasted iron pyrites) - - - - - -   7201 Pig iron and spiegeleisen, in pigs, blocks or other primary forms 1,860 N/A 1,860 2,046 2,232 2,418   7202 11 Ferro-manganese, containing by weight > 2% of carbon 1,690 N/A 1,690 1,859 2,028 2,197   7202 19 Ferro-manganese, containing by weight <= 2% carbon – N/A – - - -   7202 41 Ferro-chromium, containing by weight > 4% of carbon 2,350 N/A 2,350 2,585 2,820 3,055   7202 49 Ferro-chromium, containing by weight <= 4% of carbon – N/A – - - -   7202 60 00 Ferro-nickel – N/A – - - -   7203 Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99,94%, in lumps, pellets or similar forms _ N/A _ _ _ _   7205 Granules and powders of pig iron, spiegeleisen, iron or steel (excl. granules and powders of ferro-alloys, turnings and filings of iron or steel, radioactive iron powders "isotopes" and certain low-calibre, substandard balls for ballbearings) 1,870 N/A 1,870 2,057 2,244 2,431 (C) 7206 Iron and non-alloy steel in ingots or other primary forms (excl. remelting scrap ingots, products obtained by continuous casting and iron of heading 7203) see below see below see below see below see below see below   7206 10 00 Ingots, of iron and non-alloy steel (excl. remelted scrap ingots, continuous cast products, iron of heading 7203) 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7206 90 00 Iron and non-alloy steel, in puddled bars or other primary forms (excl. ingots, remelted scrap ingots, continuous cast products, iron of heading 7203) 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7207 Semi-finished products of iron or non-alloy steel see below see below see below see below see below see below   7207 11 11 Semi-finished products, of non-alloy free-cutting steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7207 11 14 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness of <= 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel) 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7207 11 16 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness of > 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel) 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7207 11 90 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular cross-section, the width < twice the thickness, forged 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7207 12 10 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtained by continuous casting 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7207 12 90 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular "other than square" cross-section, the width >= twice the thickness, forged 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7207 19 12 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7207 19 19 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, forged 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7207 19 80 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon (excl. semi-products, of square, rectangular, circular or polygonal cross-section) 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7207 20 11 Semi-finished products, of non-alloy free-cutting steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7207 20 15 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% but < 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel) 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7207 20 17 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel) 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7207 20 19 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, forged 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7207 20 32 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtained by continuous casting 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7207 20 39 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of rectangular "other than square" cross-section and the width >= twice the thickness, forged 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7207 20 52 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7207 20 59 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of circular or polygonal cross-section, forged 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7207 20 80 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon (excl. those of square, rectangular, circular or polygonal cross-section) 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7208 Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled, not clad, plated or coated 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7209 Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, cold-rolled "cold-reduced", not clad, plated or coated 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7210 Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7211 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", not clad, plated or coated see below see below see below see below see below see below   7211 13 00 Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as "wide flats" 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7211 14 00 Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, not further worked than hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm (excl. "wide flats") 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7211 19 00 Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, simply hot-rolled, not clad, plated or coated, of a thickness < 4,75 mm (excl. "wide flats") 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7211 23 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight < 0,25% of carbon 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7211 29 00 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight >= 0,25% of carbon 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7211 90 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked, but not clad, plated or coated 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7212 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7213 Bars and rods of iron or non-alloy steel, hot-rolled, in irregularly wound coils 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7214 Bars and rods, of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but incl. those twisted after rolling (excl. in irregularly wound coils) see below see below see below see below see below see below   7214 10 00 Bars and rods, of iron or non-alloy steel, not further worked than forged (excl. in irregularly wound coils) 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7214 20 00 Bars and rods, of iron or non-alloy steel, with indentations, ribs, groves or other deformations produced during the rolling process 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7214 30 00 Bars and rods, of non-alloy free-cutting steel, not further worked than hot-rolled, hot-drawn or hot-extruded (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling) 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7214 91 Bars and rods, of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, of rectangular "other than square" cross-section (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process, bars and rods twisted after rolling and free-cutting steel) 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7214 99 Bars and rods, of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded (excl. of rectangular [other than square] cross-section and those containing indentations, ribs, grooves or other deformations produced during the rolling process, and of non-alloy free-cutting steel) 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7215 Bars and rods, of iron or non-alloy steel, cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked, n.e.s. 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7216 Angles, shapes and sections of iron or non-alloy steel, n.e.s. 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7217 Wire of iron or non-alloy steel, in coils (excl. bars and rods) see below see below see below see below see below see below   7217 10 Wire of iron or non-alloy steel, in coils, not plated or coated, whether or not polished (excl. bars and rods) 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7217 20 Wire of iron or non-alloy steel, in coils, plated or coated with zinc (excl. bars and rods) 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7217 30 Wire of iron or non-alloy steel, in coils, plated or coated with base metals (excl. plated or coated with zinc, and bars and rods) 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7217 90 Wire of iron or non-alloy steel, in coils, plated or coated (excl. plated or coated with base metals, and bars and rods) 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7218 Stainless steel in ingots or other primary forms (excl. remelting scrap ingots and products obtained by continuous casting); semi-finished products of stainless steel see below see below see below see below see below see below   7218 10 00 Steel, stainless, in ingots and other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) 3,200 N/A 3,200 3,520 3,840 4,160   7218 91 Semi-finished products of stainless steel, of rectangular "other than square" cross-section 3,200 N/A 3,200 3,520 3,840 4,160   7218 99 11 Semi-finished products of stainless steel, of square cross-section, rolled or obtained by continuous casting 3,200 N/A 3,200 3,520 3,840 4,160   7218 99 19 Semi-finished products of stainless steel, of square cross-section, forged 3,200 N/A 3,200 3,520 3,840 4,160   7218 99 20 Semi-finished products of stainless steel, of circular cross-section or of cross-section other than square or rectangular, rolled or obtained by continuous casting 3,200 N/A 3,200 3,520 3,840 4,160   7218 99 80 Semi-finished products of stainless steel, forged (excl. products of square or rectangular cross-section) 3,200 N/A 3,200 3,520 3,840 4,160   7219 Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7219 11 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of > 10 mm 3,200 N/A 3,200 3,520 3,840 4,160   7219 12 Flat-rolled products of stainless steel, of a width of>= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 4,7 mm and <= 10 mm 3,200 N/A 3,200 3,520 3,840 4,160   7219 13 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 3 mm and < 4,75 mm 3,200 N/A 3,200 3,520 3,840 4,160   7219 14 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of < 3 mm 3,200 N/A 3,200 3,520 3,840 4,160   7219 21 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of > 10 mm 3,200 N/A 3,200 3,520 3,840 4,160   7219 22 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 4,75 mm and <= 10 mm 3,200 N/A 3,200 3,520 3,840 4,160   7219 23 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 3 mm and < 4,75 mm 3,200 N/A 3,200 3,520 3,840 4,160   7219 24 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of < 3 mm 3,200 N/A 3,200 3,520 3,840 4,160   7219 31 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 4,75 mm 3,200 N/A 3,200 3,520 3,840 4,160   7219 32 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 3 mm but < 4,75 mm 3,200 N/A 3,200 3,520 3,840 4,160   7219 33 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of > 1 mm but < 3 mm 3,200 N/A 3,200 3,520 3,840 4,160   7219 34 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 0,5 mm but <= 1 mm 3,200 N/A 3,200 3,520 3,840 4,160   7219 35 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of < 0,5 mm 3,200 N/A 3,200 3,520 3,840 4,160   7219 90 Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked 3,200 N/A 3,200 3,520 3,840 4,160   7220 Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7220 11 00 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of >= 4,75 mm 3,200 N/A 3,200 3,520 3,840 4,160   7220 12 00 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of < 4,75 mm 3,200 N/A 3,200 3,520 3,840 4,160   7220 20 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" 3,200 N/A 3,200 3,520 3,840 4,160   7220 90 Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked 3,200 N/A 3,200 3,520 3,840 4,160   7221 Bars and rods of stainless steel, hot-rolled, in irregularly wound coils 3,200 N/A 3,200 3,520 3,840 4,160   7222 Other bars and rods of stainless steel; angles, shapes and sections of stainless steel, n.e.s. see below see below see below see below see below see below   7222 11 Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only hot-extruded, of circular cross-section 3,200 N/A 3,200 3,520 3,840 4,160   7222 19 Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only extruded (excl. of circular cross-section) 3,200 N/A 3,200 3,520 3,840 4,160   7222 20 Other bars and rods of stainless steel, not further worked than cold-formed or cold-finished 3,200 N/A 3,200 3,520 3,840 4,160   7222 30 Other bars and rods of stainless steel, cold-formed or cold-finished and further worked, or not further worked than forged, or forged, or hot-formed by other means and further worked, n.e.s. 3,200 N/A 3,200 3,520 3,840 4,160   7222 40 Angles, shapes and sections of stainless steel, n.e.s. 3,200 N/A 3,200 3,520 3,840 4,160   7223 Wire of stainless steel, in coils (excl. bars and rods) see below see below see below see below see below see below   7223 00 Wire of stainless steel, in coils (excl. bars and rods) 3,200 N/A 3,200 3,520 3,840 4,160   7224 Steel, alloy, other than stainless, in ingots or other primary forms, semi-finished products of alloy steel other than stainless (excl. waste and scrap in ingot form, and products obtained by continuous casting) see below see below see below see below see below see below   7224 10 Steel, alloy, other than stainless, in ingots or other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) 3 N/A 3 3,300 3,600 3,900 (F) 7224 90 02 Semi-finished products of tool steel 3 N/A 3 3,300 3,600 3,900 (F) 7224 90 03 Semi-finished products of high-speed steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting the width measuring < twice the thickness 3 N/A 3 3,300 3,600 3,900 (F) 7224 90 05 Semi-finished products of steel containing by weight <= 0,7% of carbon, 0,5% to 1,2% of manganese, 0,6% to 2,3% of silicon, or of steel containing by weight >= 0,0008% of boron with any other element < the minimum content referred to in Note 1 f to chapter 72, of square or rectangular cross-section, hot rolled or obtained by continuous casting, the width measuring < twice the thickness 3 N/A 3 3,300 3,600 3,900 (F) 7224 90 07 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring < twice the thickness (excl. of tool steel, high-speed steel and articles of subheading 7224.90.05) 3 N/A 3 3,300 3,600 3,900 (F) 7224 90 14 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring >= twice the thickness (excl. of tool steel) 3 N/A 3 3,300 3,600 3,900 (F) 7224 90 18 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, forged (excl. of tool steel) 3 N/A 3 3,300 3,600 3,900 (F) 7224 90 31 Semi-finished products of steel containing by weight 0,9% to 1,15% carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting 3 N/A 3 3,300 3,600 3,900 (F) 7224 90 38 Semi-finished products of alloy steel, other than stainless steel, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting (excl. of tool steel and products containing by weight 0,9% to 1,15% of carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum) 3 N/A 3 3,300 3,600 3,900 (F) 7224 90 90 Semi-finished products of alloy steel, other than stainless steel, forged (excl. of tool steel and products of square or rectangular, circular or polygamol cross-section) 3 N/A 3 3,300 3,600 3,900 (F) 7225 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7225 11 00 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, grain-oriented 3,980 N/A 3,980 4,378 4,776 5,174 (C) 7225 19 10 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, hot-rolled 3 N/A 3 3,300 3,600 3,900 (C) 7225 19 90 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, cold-rolled "cold-reduced", non-grain-oriented 3 N/A 3 3,300 3,600 3,900 (F) 7225 30 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, in coils (excl. products of silicon-electrical steel) 3 N/A 3 3,300 3,600 3,900 (F) 7225 40 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, not in coils (excl. products of silicon-electrical steel) 3 N/A 3 3,300 3,600 3,900 (F) 7225 50 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of silicon-electrical steel) 3 N/A 3 3,300 3,600 3,900 (F) 7225 91 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and electrolytically plated or coated with zinc (excl. products of silicon-electrical steel) 3 N/A 3 3,300 3,600 3,900 (F) 7225 92 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and plated or coated with zinc (excl. electrolytically plated or coated and products of silicon-electrical steel) 3 N/A 3 3,300 3,600 3,900 (F) 7225 99 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. plated or coated with zinc and products of silicon-electrical steel) 3 N/A 3 3,300 3,600 3,900 (F) 7226 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7226 11 00 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", grain-oriented 3,980 N/A 3,980 4,378 4,776 5,174 (C) 7226 19 10 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, not further worked than hot-rolled 3 N/A 3 3,300 3,600 3,900 (C) 7226 19 80 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, cold-rolled "cold-reduced", whether or not further worked, or hot-rolled and further worked, non-grain-oriented 3 N/A 3 3,300 3,600 3,900 (F) 7226 20 00 Flat-rolled products of high-speed steel, of a width of <= 600 mm, hot-rolled or cold-rolled "cold-reduced" 3 N/A 3 3,300 3,600 3,900 (F) 7226 91 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than hot-rolled (excl. products of high-speed steel or silicon-electrical steel) 3 N/A 3 3,300 3,600 3,900 (F) 7226 92 00 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of high-speed steel or silicon-electrical steel) 3 N/A 3 3,300 3,600 3,900 (F) 7226 99 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. products of high-speed steel or silicon-electrical steel) 3 N/A 3 3,300 3,600 3,900 (F) 7227 Bars and rods of alloy steel other than stainless, hot-rolled, in irregularly wound coils 3 N/A 3 3,300 3,600 3,900 (C)/(F) 7228 Other bars and rods of alloy steel other than stainless, angles, shapes and sections of alloy steel other than stainless, n.e.s.; hollow drill bars and rods, of alloy or non-alloy steel see below see below see below see below see below see below   7228 10 20 Bars and rods of high-speed steel, not further worked than hot-rolled, hot-drawn or extruded, and hot-rolled, hot-drawn or extruded, not further worked than clad (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3 N/A 3 3,300 3,600 3,900 (F) 7228 10 50 Bars and rods of high-speed steel, forged (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3 N/A 3 3,300 3,600 3,900 (F) 7228 10 90 Bars and rods of high-speed steel, not further worked than cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked (excl. forged products, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3 N/A 3 3,300 3,600 3,900 (F) 7228 20 Bars and rods of silico-manganese steel (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3 N/A 3 3,300 3,600 3,900 (F) 7228 30 Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3 N/A 3 3,300 3,600 3,900 (C)/(F) 7228 40 Bars and rods of alloy steel other than stainless, not further worked than forged (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3 N/A 3 3,300 3,600 3,900 (F) 7228 50 Bars and rods of alloy steel other than stainless, not further worked than cold-formed or cold-finished (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3 N/A 3 3,300 3,600 3,900 (C)/(F) 7228 60 Bars and rods of alloy steel other than stainless, cold-formed or cold-finished and further worked or hot-formed and further worked, n.e.s. (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3 N/A 3 3,300 3,600 3,900 (F) 7228 70 Angles, shapes and sections of alloy steel other than stainless, n.e.s. 3 N/A 3 3,300 3,600 3,900 (F) 7228 80 00 Hollow drill bars and rods, of alloy or non-alloy steel 3 N/A 3 3,300 3,600 3,900 (F) 7229 Wire of alloy steel other than stainless, in coils (excl. bars and rods) 3 N/A 3 3,300 3,600 3,900 (C)/(F) 7301 Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7302 Railway or tramway track construction material of iron or steel, the following : rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers "cross-ties", fish-plates, chairs, chair wedges, sole plates "base plates", rail clips, bedplates, ties and other material specialised for jointing or fixing rails 2,790 N/A 2,790 3,069 3,348 3,627 (C) 7303 Tubes, pipes and hollow profiles, of cast iron see below see below see below see below see below see below   7303 00 Tubes, pipes and hollow profiles, of cast iron 1,860 N/A 1,860 2,046 2,232 2,418   7304 Tubes, pipes and hollow profiles, seamless, of iron or steel (excl. products of cast iron) see below see below see below see below see below see below   7304 11 00 Line pipe of a kind used for oil or gas pipelines, seamless, of stainless steel 3,200 N/A 3,200 3,520 3,840 4,160   7304 19 Line pipe of a kind used for oil or gas pipelines, seamless, of iron or steel (excl. products of stainless steel or of cast iron) 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7304 22 00 Drill pipe, seamless, of stainless steel, of a kind used in drilling for oil or gas 3,200 N/A 3,200 3,520 3,840 4,160   7304 23 00 Drill pipe, seamless, of a kind used in drilling for oil or gas, of iron or steel (excl. products of stainless steel or of cast iron) 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7304 24 00 Casing and tubing, seamless, of a kind used for drilling for oil or gas, of stainless steel 3,200 N/A 3,200 3,520 3,840 4,160   7304 29 Casing and tubing, seamless, of iron or steel, of a kind used in drilling for oil or gas (excl. products of cast iron) 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7304 31 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" (excl. cast iron products and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used for drilling for oil or gas) 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7304 39 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, not cold-drawn or cold-rolled "cold-reduced" (excl. cast iron products, line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas) 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7304 41 00 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas) 3,200 N/A 3,200 3,520 3,840 4,160   7304 49 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines or of a kind used for drilling for oil or gas) 3,200 N/A 3,200 3,520 3,840 4,160   7304 51 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil) 1,900 N/A 1,900 2,090 2,280 2,470 (F) 7304 59 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil) 1,900 N/A 1,900 2,090 2,280 2,470 (C)/(F) 7304 90 00 Tubes, pipes and hollow profiles, seamless, of non-circular cross-section, of iron or steel (excl. products of cast iron) 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7305 Tubes and pipes, having circular cross-sections and an external diameter of > 406,4 mm, of flat-rolled products of iron or steel "e.g., welded, riveted or similarly closed" 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7306 Tubes, pipes and hollow profiles "e.g., open seam or welded, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless tubes and pipes and tubes having internal and external circular cross-sections and an external diameter of > 406,4 mm) see below see below see below see below see below see below   7306 11 00 Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm 3,200 N/A 3,200 3,520 3,840 4,160   7306 19 00 Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron) 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7306 21 00 Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm 3,200 N/A 3,200 3,520 3,840 4,160   7306 29 00 Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron) 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7306 30 12 Precision tubes, welded, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7306 30 18 Precision tubes, welded, of circular cross-section, of iron or non-alloy steel (excl. cold-drawn or cold-rolled) 1,940 N/A 1,940 2,134 2,328 2,522   7306 30 41 Threaded or threadable tubes "gas pipe", welded, of circular cross-section, of iron or non-alloy steel, plated or coated with zinc 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7306 30 49 Threaded or threadable tubes "gas pipe", welded, of circular cross-section, of iron or non-alloy steel (excl. products plated or coated with zinc) 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7306 30 72 Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel, of an external diameter of <= 168,3 mm, plated or coated with zinc (excl. line pipe of a kind used for oil or gas pipelines or casing and tubingof a kind used in drilling for oil or gas) 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7306 30 77 Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel of an external diameter of <= 168,3 mm (excl. plated or coated with zinc and line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used in drilling for oil or gas, precision tubes and threaded or threadable tubes "gas pipe") 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7306 30 80 Tubes, pipes and hollow profiles, welded, having a circular cross-section, of iron or steel, of an external diameter of > 168,3 mm but <= 406,4 mm (excl. line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, or precision steel tubes, electrical conduit tubes or threaded or threadable tubes "gas pipe") 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7306 40 20 Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. products having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) 3,200 N/A 3,200 3,520 3,840 4,160   7306 40 80 Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel (excl. products cold-drawn or cold-rolled "cold-reduced", tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) 3,200 N/A 3,200 3,520 3,840 4,160   7306 50 21 Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" 1,940 N/A 1,940 2,134 2,328 2,522 (F) 7306 50 29 Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless (excl. cold-drawn or cold-rolled) 1,940 N/A 1,940 2,134 2,328 2,522 (F) 7306 50 80 Tubes, pipes and hollow profiles, welded, of circular cross-section, of alloy steel other than stainless (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and precision steel tubes) 1,940 N/A 1,940 2,134 2,328 2,522 (F) 7306 61 10 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel 3,200 N/A 3,200 3,520 3,840 4,160   7306 61 92 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of <= 2 mm 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7306 61 99 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of > 2 mm 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7306 69 10 Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) 3,200 N/A 3,200 3,520 3,840 4,160   7306 69 90 Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of iron or steel other than stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7306 90 00 Tubes, pipes and hollow profiles "e.g., open seam, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless or welded tubes and pipes and tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm) 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7307 Tube or pipe fittings "e.g. couplings, elbows, sleeves", of iron or steel see below see below see below see below see below see below   7307 11 Tube or pipe fittings of non-malleable cast iron 1,860 N/A 1,860 2,046 2,232 2,418   7307 19 10 Tube or pipe fittings of cast iron (excl. of non-malleable) 1,860 N/A 1,860 2,046 2,232 2,418   7307 19 90 Cast tube or pipe fittings of steel 1,940 N/A 1,940 2,134 2,328 2,522   7307 21 00 Flanges of stainless steel (excl. cast products) 1,950 N/A 1,950 2,145 2,340 2,535   7307 22 Threaded elbows, bends and sleeves of stainless steel (excl. cast products) 1,950 N/A 1,950 2,145 2,340 2,535   7307 23 Butt welding tube or pipe fittings of stainless steel (excl. cast products) 1,950 N/A 1,950 2,145 2,340 2,535   7307 29 Tube or pipe fittings of stainless steel (excl. cast products, flanges, threaded elbows, bends and sleeves and butt weldings fittings) 1,950 N/A 1,950 2,145 2,340 2,535   7307 91 00 Flanges of iron or steel (excl. cast or stainless products) 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7307 92 Threaded elbows, bends and sleeves, of stainless steel (excl. cast or stainless products) 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7307 93 Butt welding fittings of iron or steel (excl. cast iron or stainless steel products, and flanges) 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7307 99 Tube or pipe fittings, of iron or steel (excl. cast iron or stainless steel products; flanges; threaded elbows, bends and sleeves; butt welding fittings) 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7308 Structures and parts of structures "e.g., bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns", of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel (excl. prefabricated buildings of heading 9406) 2,550 N/A 2,550 2,805 3,060 3,315 (C) 7309 Reservoirs, tanks, vats and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of > 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated (excl. containers specifically constructed or equipped for one or more types of transport) 2,550 N/A 2,550 2,805 3,060 3,315 (C) 7310 Tanks, casks, drums, cans, boxes and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of <= 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated, n.e.s. 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7311 Containers of iron or steel, for compressed or liquefied gas (excl. containers specifically constructed or equipped for one or more types of transport) see below see below see below see below see below see below   7311 00 Containers of iron or steel, for compressed or liquefied gas (excl. containers specifically constructed or equipped for one or more types of transport) 2,380 N/A 2,380 2,618 2,856 3,094 (C) 7318 Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers, incl. spring washers, and similar articles, of iron or steel (excl. lag screws, stoppers, plugs and the like, threaded) see below see below see below see below see below see below   7318 11 00 Coach screws of iron or steel 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7318 12 10 Wood screws of stainless steel (excl. coach screws) 3,200 N/A 3,200 3,520 3,840 4,160 (C) 7318 12 90 Wood screws of iron or steel other than stainless (excl. coach screws) 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7318 13 00 Screw hooks and screw rings, of iron or steel 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7318 14 10 Self-tapping screws, of stainless steel (excl. wood screws) 3,200 N/A 3,200 3,520 3,840 4,160 (C) 7318 14 91 Spaced-thread screws of iron or steel other than stainless 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7318 14 99 Self-tapping screws of iron or steel other than stainless (excl. spaced-thread screws and wood screws) 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7318 15 Threaded screws and bolts, of iron or steel, whether or not with their nuts and washers (excl. coach screws and other wood screws, screw hooks and screw rings, self-tapping screws, lag screws, stoppers, plugs and the like, threaded) 2,110 N/A 2,110 2,321 2,532 2,743 (C) 7318 16 Nuts of iron or steel 2,030 N/A 2,030 2,233 2,436 2,639 (C) 7318 19 00 Threaded articles, of iron or steel, n.e.s. 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7318 21 00 Spring washers and other lock washers, of iron or steel 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7318 22 00 Washers of iron or steel (excl. spring washers and other lock washers) 2,040 N/A 2,040 2,244 2,448 2,652 (C) 7318 23 00 Rivets of iron or steel (excl. tubular and bifurcated rivets for particular uses) 2 N/A 2 2,200 2,400 2,600 (C) 7318 24 00 Cotters and cotter pins, of iron or steel 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7318 29 00 Non-threaded articles, of iron or steel 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7326 Articles of iron or steel, n.e.s. (excl. cast articles) see below see below see below see below see below see below   7326 11 00 Grinding balls and similar articles for mills, of iron or steel, forged or stamped, but not further worked 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7326 19 Articles of iron or steel, forged or stamped, but not further worked, n.e.s. (excl. grinding balls and similar articles for mills) 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7326 20 00 Articles of iron or steel wire, n.e.s. 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7326 90 30 Ladders and steps, of iron or steel 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7326 90 40 Pallets and similar platforms for handling goods, of iron or steel 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7326 90 50 Reels for cables, piping and the like, of iron or steel 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7326 90 60 Ventilators, non-mechanical, guttering, hooks and like articles used in the building industry, n.e.s., of iron or steel 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7326 90 92 Articles of iron or steel, open-die forged, n.e.s. 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7326 90 94 Articles of iron or steel, closed-die forged, n.e.s. 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7326 90 96 Sintered articles of iron or steel, n.e.s. 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7326 90 98 Articles of iron or steel, n.e.s. 1,940 N/A 1,940 2,134 2,328 2,522 (C) Iraq Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – – – –   2523 10 00 White clinker – – – – – –   2523 10 00 Grey clinker 1,280 0,050 1,330 1,463 1,596 1,729 (A) 2523 21 00 White Portland cement – – – – – –   2523 29 00 Grey Portland cement 1,260 0,090 1,350 1,485 1,620 1,755   2523 90 00 White hydraulic cements – – – – – –   2523 90 00 Grey hydraulic cements 1,190 0,090 1,290 1,419 1,548 1,677 (A) 2523 30 00 Aluminous cement – – – – – –   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 2,460 0,050 2,520 2,545 2,545 2,545   2814 10 00 Anhydrous ammonia 1,960 0,160 2,120 2,141 2,141 2,141   2814 20 00 Ammonia in aqueous solution 0,590 0,050 0,640 0,646 0,646 0,646   2834 21 00 Nitrate of potassium 1,990 0,080 2,070 2,091 2,091 2,091   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,450 0,040 0,490 0,495 0,495 0,495   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,740 0,040 0,780 0,788 0,788 0,788   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,340 0,130 1,470 1,485 1,485 1,485   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,320 0,120 1,440 1,454 1,454 1,454   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,580 0,100 0,680 0,687 0,687 0,687   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,280 0,110 1,390 1,404 1,404 1,404   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,510 0,080 1,590 1,606 1,606 1,606   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,330 0,130 2,450 2,475 2,475 2,475   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2 0,120 2,110 2,131 2,131 2,131   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2 0,120 2,110 2,131 2,131 2,131   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 3,850 0,080 3,930 3,969 3,969 3,969   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,950 0,110 2,060 2,081 2,081 2,081   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,460 0,100 1,560 1,576 1,576 1,576   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,510 0,120 1,620 1,636 1,636 1,636   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,740 0,100 0,840 0,848 0,848 0,848   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,980 0,120 1,100 1,111 1,111 1,111   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,660 0,090 0,760 0,768 0,768 0,768   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,460 0,070 0,540 0,545 0,545 0,545   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,300 0,060 0,350 0,354 0,354 0,354   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,350 0,150 1,500 1,515 1,515 1,515   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,540 0,120 0,660 0,667 0,667 0,667   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,310 0,090 1,400 1,414 1,414 1,414   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,670 0,060 0,740 0,747 0,747 0,747   Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066   Israel Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – – – –   2523 10 00 White clinker – – – – – –   2523 10 00 Grey clinker 1,280 0,030 1,310 1,441 1,572 1,703 (A) 2523 21 00 White Portland cement – – – – – –   2523 29 00 Grey Portland cement 1,260 0,060 1,320 1,452 1,584 1,716   2523 90 00 White hydraulic cements – – – – – –   2523 90 00 Grey hydraulic cements 1,200 0,070 1,260 1,386 1,512 1,638 (A) 2523 30 00 Aluminous cement – – – – – –   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 2,530 0,030 2,560 2,586 2,586 2,586   2814 10 00 Anhydrous ammonia – – – – – –   2814 20 00 Ammonia in aqueous solution 0,610 0,030 0,640 0,646 0,646 0,646   2834 21 00 Nitrate of potassium 2,040 0,050 2,080 2,101 2,101 2,101   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,430 0,030 0,450 0,455 0,455 0,455   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,710 0,030 0,730 0,737 0,737 0,737   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,280 0,080 1,360 1,374 1,374 1,374   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,250 0,080 1,330 1,343 1,343 1,343   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,580 0,060 0,640 0,646 0,646 0,646   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,300 0,070 1,370 1,384 1,384 1,384   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,540 0,050 1,590 1,606 1,606 1,606   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,370 0,080 2,440 2,464 2,464 2,464   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,010 0,070 2,080 2,101 2,101 2,101   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,010 0,070 2,080 2,101 2,101 2,101   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 3,940 0,050 3,990 4,030 4,030 4,030   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,980 0,070 2,050 2,071 2,071 2,071   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,470 0,060 1,530 1,545 1,545 1,545   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,480 0,070 1,560 1,576 1,576 1,576   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,750 0,060 0,810 0,818 0,818 0,818   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,980 0,070 1,060 1,071 1,071 1,071   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,660 0,060 0,720 0,727 0,727 0,727   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,480 0,040 0,520 0,525 0,525 0,525   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,300 0,040 0,340 0,343 0,343 0,343   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,350 0,090 1,440 1,454 1,454 1,454   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,540 0,080 0,620 0,626 0,626 0,626   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,340 0,060 1,390 1,404 1,404 1,404   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,680 0,040 0,720 0,727 0,727 0,727   Aluminium         10 % mark-up 20 % mark-up 30 % mark-up   7601 Unwrought aluminium 0,360 N/A 0,360 0,396 0,432 0,468 (L) 7603 Aluminium powders and flakes 0,620 N/A 0,620 0,682 0,744 0,806 (L) 7604 10 10 Bars and rods 0,840 N/A 0,840 0,924 1,008 1,092 (L) 7604 10 90 Profiles 0,860 N/A 0,860 0,946 1,032 1,118 (L) 7604 21 00 Hollow profiles 0,860 N/A 0,860 0,946 1,032 1,118 (L) 7604 29 10 Bars and rods 0,840 N/A 0,840 0,924 1,008 1,092 (L) 7604 29 90 Profiles 0,860 N/A 0,860 0,946 1,032 1,118 (L) 7605 Aluminium wire 0,840 N/A 0,840 0,924 1,008 1,092 (L) 7606 Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm 1,300 N/A 1,300 1,430 1,560 1,690 (L) 7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm 1,300 N/A 1,300 1,430 1,560 1,690 (L) 7608 Aluminium tubes and pipes 0,860 N/A 0,860 0,946 1,032 1,118 (L) 7609 00 00 Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) 0,860 N/A 0,860 0,946 1,032 1,118 (L) 7610 10 00 Doors, windows and their frames and thresholds for doors 0,860 N/A 0,860 0,946 1,032 1,118 (L) 7610 90 Other 0,860 N/A 0,860 0,946 1,032 1,118 (L) 7610 90 10 Bridges and bridge-sections, towers and lattice masts 0,860 N/A 0,860 0,946 1,032 1,118 (L) 7610 90 90 Other 0,860 N/A 0,860 0,946 1,032 1,118 (L) 7611 00 00 Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 1,300 N/A 1,300 1,430 1,560 1,690 (L) 7612 Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 1,300 N/A 1,300 1,430 1,560 1,690 (L) 7613 00 00 Aluminium containers for compressed or liquefied gas 1,300 N/A 1,300 1,430 1,560 1,690 (L) 7614 Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated 0,840 N/A 0,840 0,924 1,008 1,092 (L) 7616 10 00 Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles 1,300 N/A 1,300 1,430 1,560 1,690 (L) 7616 91 00 Cloth, grill, netting and fencing, of aluminium wire 1,300 N/A 1,300 1,430 1,560 1,690 (L) 7616 99 10 Cast 0,620 N/A 0,620 0,682 0,744 0,806 (L) 7616 99 90 Other 1,300 N/A 1,300 1,430 1,560 1,690 (L) Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066   Iron and steel         10 % mark-up 20 % mark-up 30 % mark-up   7202 11 Ferro-manganese, containing by weight > 2% of carbon 1,690 N/A 1,690 1,859 2,028 2,197   7202 19 Ferro-manganese, containing by weight <= 2% carbon _ _ _ _ _ _   7202 41 Ferro-chromium, containing by weight > 4% of carbon 2,350 N/A 2,350 2,585 2,820 3,055   7202 49 Ferro-chromium, containing by weight <= 4% of carbon _ _ _ _ _ _   7202 60 00 Ferro-nickel 3,480 N/A 3,480 3,828 4,176 4,524   Jamaica Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – – – –   2523 10 00 White clinker – – – – – –   2523 10 00 Grey clinker 1,090 0,050 1,130 1,243 1,356 1,469 (A) 2523 21 00 White Portland cement – – – – – –   2523 29 00 Grey Portland cement 1,090 0,080 1,170 1,287 1,404 1,521   2523 90 00 White hydraulic cements – – – – – –   2523 90 00 Grey hydraulic cements 1,030 0,090 1,120 1,232 1,344 1,456 (A) 2523 30 00 Aluminous cement – – – – – –   Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066   Japan Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – – – –   2523 10 00 White clinker – – – – – –   2523 10 00 Grey clinker 0,820 0,030 0,850 0,935 1,020 1,105 (A) 2523 21 00 White Portland cement – – – – – –   2523 29 00 Grey Portland cement 0,830 0,060 0,890 0,979 1,068 1,157   2523 90 00 White hydraulic cements – – – – – –   2523 90 00 Grey hydraulic cements 0,790 0,060 0,850 0,935 1,020 1,105 (A) 2523 30 00 Aluminous cement 1,800 0,150 1,940 2,134 2,328 2,522   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 2,130 0,060 2,190 2,212 2,212 2,212   2814 10 00 Anhydrous ammonia 2,050 0,140 2,190 2,212 2,212 2,212   2814 20 00 Ammonia in aqueous solution 0,620 0,040 0,660 0,667 0,667 0,667   2834 21 00 Nitrate of potassium 1,790 0,080 1,870 1,889 1,889 1,889   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,470 0,040 0,500 0,505 0,505 0,505   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,770 0,040 0,810 0,818 0,818 0,818   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,410 0,110 1,520 1,535 1,535 1,535   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,380 0,110 1,480 1,495 1,495 1,495   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,610 0,080 0,690 0,697 0,697 0,697   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,210 0,090 1,300 1,313 1,313 1,313   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,360 0,080 1,440 1,454 1,454 1,454   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,100 0,120 2,210 2,232 2,232 2,232   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,810 0,110 1,910 1,929 1,929 1,929   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,810 0,110 1,910 1,929 1,929 1,929   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 3,330 0,090 3,420 3,454 3,454 3,454   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,760 0,100 1,860 1,879 1,879 1,879   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,380 0,090 1,470 1,485 1,485 1,485   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,470 0,100 1,570 1,586 1,586 1,586   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,710 0,080 0,790 0,798 0,798 0,798   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,900 0,100 1 1,010 1,010 1,010   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,610 0,080 0,690 0,697 0,697 0,697   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,480 0,060 0,540 0,545 0,545 0,545   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,310 0,050 0,360 0,364 0,364 0,364   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,230 0,120 1,350 1,364 1,364 1,364   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,560 0,100 0,660 0,667 0,667 0,667   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,190 0,080 1,270 1,283 1,283 1,283   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,610 0,050 0,670 0,677 0,677 0,677   Aluminium         10 % mark-up 20 % mark-up 30 % mark-up   7601 Unwrought aluminium 0,360 N/A 0,360 0,396 0,432 0,468 (L) 7603 Aluminium powders and flakes 1,050 N/A 1,050 1,155 1,260 1,365 (L) 7604 10 10 Bars and rods 1,280 N/A 1,280 1,408 1,536 1,664 (L) 7604 10 90 Profiles 1,290 N/A 1,290 1,419 1,548 1,677 (L) 7604 21 00 Hollow profiles 1,290 N/A 1,290 1,419 1,548 1,677 (L) 7604 29 10 Bars and rods 1,280 N/A 1,280 1,408 1,536 1,664 (L) 7604 29 90 Profiles 1,290 N/A 1,290 1,419 1,548 1,677 (L) 7605 Aluminium wire 1,280 N/A 1,280 1,408 1,536 1,664 (L) 7606 Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm 1,730 N/A 1,730 1,903 2,076 2,249 (L) 7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm 1,730 N/A 1,730 1,903 2,076 2,249 (L) 7608 Aluminium tubes and pipes 1,290 N/A 1,290 1,419 1,548 1,677 (L) 7609 00 00 Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) 1,290 N/A 1,290 1,419 1,548 1,677 (L) 7610 10 00 Doors, windows and their frames and thresholds for doors 1,290 N/A 1,290 1,419 1,548 1,677 (L) 7610 90 Other 1,290 N/A 1,290 1,419 1,548 1,677 (L) 7610 90 10 Bridges and bridge-sections, towers and lattice masts 1,290 N/A 1,290 1,419 1,548 1,677 (L) 7610 90 90 Other 1,290 N/A 1,290 1,419 1,548 1,677 (L) 7611 00 00 Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 1,730 N/A 1,730 1,903 2,076 2,249 (L) 7612 Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 1,730 N/A 1,730 1,903 2,076 2,249 (L) 7613 00 00 Aluminium containers for compressed or liquefied gas 1,730 N/A 1,730 1,903 2,076 2,249 (L) 7614 Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated 1,280 N/A 1,280 1,408 1,536 1,664 (L) 7616 10 00 Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles 1,730 N/A 1,730 1,903 2,076 2,249 (L) 7616 91 00 Cloth, grill, netting and fencing, of aluminium wire 1,730 N/A 1,730 1,903 2,076 2,249 (L) 7616 99 10 Cast 1,050 N/A 1,050 1,155 1,260 1,365 (L) 7616 99 90 Other 1,730 N/A 1,730 1,903 2,076 2,249 (L) Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 14,030 N/A 14,030 15,433 16,836 18,239   Iron and steel         10 % mark-up 20 % mark-up 30 % mark-up   2601 12 00 Agglomerated iron ores and concentrates (excl. roasted iron pyrites) 0,160 0,040 0,200 0,220 0,240 0,260   7201 Pig iron and spiegeleisen, in pigs, blocks or other primary forms 1,960 N/A 1,960 2,156 2,352 2,548   7202 11 Ferro-manganese, containing by weight > 2% of carbon 1,690 N/A 1,690 1,859 2,028 2,197   7202 19 Ferro-manganese, containing by weight <= 2% carbon 5,590 N/A 5,590 6,149 6,708 7,267   7202 41 Ferro-chromium, containing by weight > 4% of carbon 2,350 N/A 2,350 2,585 2,820 3,055   7202 49 Ferro-chromium, containing by weight <= 4% of carbon – N/A – – – –   7202 60 00 Ferro-nickel 3,480 N/A 3,480 3,828 4,176 4,524   7203 Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99,94%, in lumps, pellets or similar forms – N/A – – – –   7205 Granules and powders of pig iron, spiegeleisen, iron or steel (excl. granules and powders of ferro-alloys, turnings and filings of iron or steel, radioactive iron powders "isotopes" and certain low-calibre, substandard balls for ballbearings) 1,990 N/A 1,990 2,189 2,388 2,587 (C) 7206 Iron and non-alloy steel in ingots or other primary forms (excl. remelting scrap ingots, products obtained by continuous casting and iron of heading 7203) see below see below see below see below see below see below   7206 10 00 Ingots, of iron and non-alloy steel (excl. remelted scrap ingots, continuous cast products, iron of heading 7203) 2,070 N/A 2,070 2,277 2,484 2,691 (C) 7206 90 00 Iron and non-alloy steel, in puddled bars or other primary forms (excl. ingots, remelted scrap ingots, continuous cast products, iron of heading 7203) 2,070 N/A 2,070 2,277 2,484 2,691 (C) 7207 Semi-finished products of iron or non-alloy steel see below see below see below see below see below see below   7207 11 11 Semi-finished products, of non-alloy free-cutting steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting 2,100 N/A 2,100 2,310 2,520 2,730 (C) 7207 11 14 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness of <= 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel) 2,100 N/A 2,100 2,310 2,520 2,730 (C) 7207 11 16 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness of > 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel) 2,100 N/A 2,100 2,310 2,520 2,730 (C) 7207 11 90 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular cross-section, the width < twice the thickness, forged 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7207 12 10 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtained by continuous casting 2,100 N/A 2,100 2,310 2,520 2,730 (C) 7207 12 90 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular "other than square" cross-section, the width >= twice the thickness, forged 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7207 19 12 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting 2,100 N/A 2,100 2,310 2,520 2,730 (C) 7207 19 19 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, forged 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7207 19 80 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon (excl. semi-products, of square, rectangular, circular or polygonal cross-section) 2,100 N/A 2,100 2,310 2,520 2,730 (C) 7207 20 11 Semi-finished products, of non-alloy free-cutting steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting 2,100 N/A 2,100 2,310 2,520 2,730 (C) 7207 20 15 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% but < 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel) 2,100 N/A 2,100 2,310 2,520 2,730 (C) 7207 20 17 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel) 2,100 N/A 2,100 2,310 2,520 2,730 (C) 7207 20 19 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, forged 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7207 20 32 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtained by continuous casting 2,100 N/A 2,100 2,310 2,520 2,730 (C) 7207 20 39 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of rectangular "other than square" cross-section and the width >= twice the thickness, forged 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7207 20 52 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting 2,100 N/A 2,100 2,310 2,520 2,730 (C) 7207 20 59 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of circular or polygonal cross-section, forged 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7207 20 80 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon (excl. those of square, rectangular, circular or polygonal cross-section) 2,100 N/A 2,100 2,310 2,520 2,730 (C) 7208 Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled, not clad, plated or coated 2,100 N/A 2,100 2,310 2,520 2,730 (C) 7209 Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, cold-rolled "cold-reduced", not clad, plated or coated 2,143 N/A 2,143 2,357 2,571 2,786 (C) 7210 Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated 2,130 N/A 2,130 2,343 2,556 2,769 (C) 7211 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", not clad, plated or coated see below see below see below see below see below see below   7211 13 00 Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as "wide flats" 2,100 N/A 2,100 2,310 2,520 2,730 (C) 7211 14 00 Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, not further worked than hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm (excl. "wide flats") 2,100 N/A 2,100 2,310 2,520 2,730 (C) 7211 19 00 Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, simply hot-rolled, not clad, plated or coated, of a thickness < 4,75 mm (excl. "wide flats") 2,100 N/A 2,100 2,310 2,520 2,730 (C) 7211 23 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight < 0,25% of carbon 2,130 N/A 2,130 2,343 2,556 2,769 (C) 7211 29 00 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight >= 0,25% of carbon 2,130 N/A 2,130 2,343 2,556 2,769 (C) 7211 90 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked, but not clad, plated or coated 2,130 N/A 2,130 2,343 2,556 2,769 (C) 7212 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated 2,130 N/A 2,130 2,343 2,556 2,769 (C) 7213 Bars and rods of iron or non-alloy steel, hot-rolled, in irregularly wound coils 2,100 N/A 2,100 2,310 2,520 2,730 (C) 7214 Bars and rods, of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but incl. those twisted after rolling (excl. in irregularly wound coils) see below see below see below see below see below see below   7214 10 00 Bars and rods, of iron or non-alloy steel, not further worked than forged (excl. in irregularly wound coils) 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7214 20 00 Bars and rods, of iron or non-alloy steel, with indentations, ribs, groves or other deformations produced during the rolling process 2,100 N/A 2,100 2,310 2,520 2,730 (C) 7214 30 00 Bars and rods, of non-alloy free-cutting steel, not further worked than hot-rolled, hot-drawn or hot-extruded (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling) 2,100 N/A 2,100 2,310 2,520 2,730 (C) 7214 91 Bars and rods, of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, of rectangular "other than square" cross-section (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process, bars and rods twisted after rolling and free-cutting steel) 2,100 N/A 2,100 2,310 2,520 2,730 (C) 7214 99 Bars and rods, of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded (excl. of rectangular [other than square] cross-section and those containing indentations, ribs, grooves or other deformations produced during the rolling process, and of non-alloy free-cutting steel) 2,100 N/A 2,100 2,310 2,520 2,730 (C) 7215 Bars and rods, of iron or non-alloy steel, cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked, n.e.s. 2,100 N/A 2,100 2,310 2,520 2,730 (C) 7216 Angles, shapes and sections of iron or non-alloy steel, n.e.s. 2,100 N/A 2,100 2,310 2,520 2,730 (C) 7217 Wire of iron or non-alloy steel, in coils (excl. bars and rods) see below see below see below see below see below see below   7217 10 Wire of iron or non-alloy steel, in coils, not plated or coated, whether or not polished (excl. bars and rods) 2,100 N/A 2,100 2,310 2,520 2,730 (C) 7217 20 Wire of iron or non-alloy steel, in coils, plated or coated with zinc (excl. bars and rods) 2,100 N/A 2,100 2,310 2,520 2,730 (C) 7217 30 Wire of iron or non-alloy steel, in coils, plated or coated with base metals (excl. plated or coated with zinc, and bars and rods) 2,100 N/A 2,100 2,310 2,520 2,730 (C) 7217 90 Wire of iron or non-alloy steel, in coils, plated or coated (excl. plated or coated with base metals, and bars and rods) 2,100 N/A 2,100 2,310 2,520 2,730 (C) 7218 Stainless steel in ingots or other primary forms (excl. remelting scrap ingots and products obtained by continuous casting); semi-finished products of stainless steel see below see below see below see below see below see below   7218 10 00 Steel, stainless, in ingots and other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) 3,520 N/A 3,520 3,872 4,224 4,576   7218 91 Semi-finished products of stainless steel, of rectangular "other than square" cross-section 3,330 N/A 3,330 3,663 3,996 4,329   7218 99 11 Semi-finished products of stainless steel, of square cross-section, rolled or obtained by continuous casting 3,330 N/A 3,330 3,663 3,996 4,329   7218 99 19 Semi-finished products of stainless steel, of square cross-section, forged 3,520 N/A 3,520 3,872 4,224 4,576   7218 99 20 Semi-finished products of stainless steel, of circular cross-section or of cross-section other than square or rectangular, rolled or obtained by continuous casting 3,330 N/A 3,330 3,663 3,996 4,329   7218 99 80 Semi-finished products of stainless steel, forged (excl. products of square or rectangular cross-section) 3,520 N/A 3,520 3,872 4,224 4,576   7219 Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7219 11 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of > 10 mm 3,330 N/A 3,330 3,663 3,996 4,329   7219 12 Flat-rolled products of stainless steel, of a width of>= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 4,7 mm and <= 10 mm 3,330 N/A 3,330 3,663 3,996 4,329   7219 13 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 3 mm and < 4,75 mm 3,330 N/A 3,330 3,663 3,996 4,329   7219 14 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of < 3 mm 3,330 N/A 3,330 3,663 3,996 4,329   7219 21 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of > 10 mm 3,330 N/A 3,330 3,663 3,996 4,329   7219 22 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 4,75 mm and <= 10 mm 3,330 N/A 3,330 3,663 3,996 4,329   7219 23 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 3 mm and < 4,75 mm 3,330 N/A 3,330 3,663 3,996 4,329   7219 24 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of < 3 mm 3,330 N/A 3,330 3,663 3,996 4,329   7219 31 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 4,75 mm 3,360 N/A 3,360 3,696 4,032 4,368   7219 32 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 3 mm but < 4,75 mm 3,360 N/A 3,360 3,696 4,032 4,368   7219 33 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of > 1 mm but < 3 mm 3,360 N/A 3,360 3,696 4,032 4,368   7219 34 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 0,5 mm but <= 1 mm 3,360 N/A 3,360 3,696 4,032 4,368   7219 35 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of < 0,5 mm 3,360 N/A 3,360 3,696 4,032 4,368   7219 90 Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked 3,360 N/A 3,360 3,696 4,032 4,368   7220 Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7220 11 00 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of >= 4,75 mm 3,330 N/A 3,330 3,663 3,996 4,329   7220 12 00 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of < 4,75 mm 3,330 N/A 3,330 3,663 3,996 4,329   7220 20 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" 3,360 N/A 3,360 3,696 4,032 4,368   7220 90 Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked 3,360 N/A 3,360 3,696 4,032 4,368   7221 Bars and rods of stainless steel, hot-rolled, in irregularly wound coils 3,360 N/A 3,360 3,696 4,032 4,368   7222 Other bars and rods of stainless steel; angles, shapes and sections of stainless steel, n.e.s. see below see below see below see below see below see below   7222 11 Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only hot-extruded, of circular cross-section 3,360 N/A 3,360 3,696 4,032 4,368   7222 19 Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only extruded (excl. of circular cross-section) 3,360 N/A 3,360 3,696 4,032 4,368   7222 20 Other bars and rods of stainless steel, not further worked than cold-formed or cold-finished 3,360 N/A 3,360 3,696 4,032 4,368   7222 30 Other bars and rods of stainless steel, cold-formed or cold-finished and further worked, or not further worked than forged, or forged, or hot-formed by other means and further worked, n.e.s. 3,520 N/A 3,520 3,872 4,224 4,576   7222 40 Angles, shapes and sections of stainless steel, n.e.s. 3,360 N/A 3,360 3,696 4,032 4,368   7223 Wire of stainless steel, in coils (excl. bars and rods) see below see below see below see below see below see below   7223 00 Wire of stainless steel, in coils (excl. bars and rods) 3,370 N/A 3,370 3,707 4,044 4,381   7224 Steel, alloy, other than stainless, in ingots or other primary forms, semi-finished products of alloy steel other than stainless (excl. waste and scrap in ingot form, and products obtained by continuous casting) see below see below see below see below see below see below   7224 10 Steel, alloy, other than stainless, in ingots or other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) 3,690 N/A 3,690 4,059 4,428 4,797 (F) 7224 90 02 Semi-finished products of tool steel 3,500 N/A 3,500 3,850 4,200 4,550 (F) 7224 90 03 Semi-finished products of high-speed steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting the width measuring < twice the thickness 3,500 N/A 3,500 3,850 4,200 4,550 (F) 7224 90 05 Semi-finished products of steel containing by weight <= 0,7% of carbon, 0,5% to 1,2% of manganese, 0,6% to 2,3% of silicon, or of steel containing by weight >= 0,0008% of boron with any other element < the minimum content referred to in Note 1 f to chapter 72, of square or rectangular cross-section, hot rolled or obtained by continuous casting, the width measuring < twice the thickness 3,500 N/A 3,500 3,850 4,200 4,550 (F) 7224 90 07 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring < twice the thickness (excl. of tool steel, high-speed steel and articles of subheading 7224.90.05) 3,500 N/A 3,500 3,850 4,200 4,550 (F) 7224 90 14 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring >= twice the thickness (excl. of tool steel) 3,500 N/A 3,500 3,850 4,200 4,550 (F) 7224 90 18 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, forged (excl. of tool steel) 3,690 N/A 3,690 4,059 4,428 4,797 (F) 7224 90 31 Semi-finished products of steel containing by weight 0,9% to 1,15% carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting 3,500 N/A 3,500 3,850 4,200 4,550 (F) 7224 90 38 Semi-finished products of alloy steel, other than stainless steel, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting (excl. of tool steel and products containing by weight 0,9% to 1,15% of carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum) 3,500 N/A 3,500 3,850 4,200 4,550 (F) 7224 90 90 Semi-finished products of alloy steel, other than stainless steel, forged (excl. of tool steel and products of square or rectangular, circular or polygamol cross-section) 3,690 N/A 3,690 4,059 4,428 4,797 (F) 7225 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7225 11 00 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, grain-oriented 4,620 N/A 4,620 5,082 5,544 6,006 (C) 7225 19 10 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, hot-rolled 3,500 N/A 3,500 3,850 4,200 4,550 (C) 7225 19 90 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, cold-rolled "cold-reduced", non-grain-oriented 3,530 N/A 3,530 3,883 4,236 4,589 (F) 7225 30 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, in coils (excl. products of silicon-electrical steel) 3,500 N/A 3,500 3,850 4,200 4,550 (F) 7225 40 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, not in coils (excl. products of silicon-electrical steel) 3,500 N/A 3,500 3,850 4,200 4,550 (F) 7225 50 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of silicon-electrical steel) 3,530 N/A 3,530 3,883 4,236 4,589 (F) 7225 91 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and electrolytically plated or coated with zinc (excl. products of silicon-electrical steel) 3,530 N/A 3,530 3,883 4,236 4,589 (F) 7225 92 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and plated or coated with zinc (excl. electrolytically plated or coated and products of silicon-electrical steel) 3,530 N/A 3,530 3,883 4,236 4,589 (F) 7225 99 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. plated or coated with zinc and products of silicon-electrical steel) 3,530 N/A 3,530 3,883 4,236 4,589 (F) 7226 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7226 11 00 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", grain-oriented 4,620 N/A 4,620 5,082 5,544 6,006 (C) 7226 19 10 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, not further worked than hot-rolled 3,500 N/A 3,500 3,850 4,200 4,550 (C) 7226 19 80 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, cold-rolled "cold-reduced", whether or not further worked, or hot-rolled and further worked, non-grain-oriented 3,530 N/A 3,530 3,883 4,236 4,589 (F) 7226 20 00 Flat-rolled products of high-speed steel, of a width of <= 600 mm, hot-rolled or cold-rolled "cold-reduced" 3,500 N/A 3,500 3,850 4,200 4,550 (F) 7226 91 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than hot-rolled (excl. products of high-speed steel or silicon-electrical steel) 3,500 N/A 3,500 3,850 4,200 4,550 (F) 7226 92 00 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of high-speed steel or silicon-electrical steel) 3,530 N/A 3,530 3,883 4,236 4,589 (F) 7226 99 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. products of high-speed steel or silicon-electrical steel) 3,530 N/A 3,530 3,883 4,236 4,589 (F) 7227 Bars and rods of alloy steel other than stainless, hot-rolled, in irregularly wound coils 3,530 N/A 3,530 3,883 4,236 4,589 (C)/(F) 7228 Other bars and rods of alloy steel other than stainless, angles, shapes and sections of alloy steel other than stainless, n.e.s.; hollow drill bars and rods, of alloy or non-alloy steel see below see below see below see below see below see below   7228 10 20 Bars and rods of high-speed steel, not further worked than hot-rolled, hot-drawn or extruded, and hot-rolled, hot-drawn or extruded, not further worked than clad (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,530 N/A 3,530 3,883 4,236 4,589 (F) 7228 10 50 Bars and rods of high-speed steel, forged (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,690 N/A 3,690 4,059 4,428 4,797 (F) 7228 10 90 Bars and rods of high-speed steel, not further worked than cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked (excl. forged products, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,530 N/A 3,530 3,883 4,236 4,589 (F) 7228 20 Bars and rods of silico-manganese steel (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,530 N/A 3,530 3,883 4,236 4,589 (F) 7228 30 Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,530 N/A 3,530 3,883 4,236 4,589 (C)/(F) 7228 40 Bars and rods of alloy steel other than stainless, not further worked than forged (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,690 N/A 3,690 4,059 4,428 4,797 (F) 7228 50 Bars and rods of alloy steel other than stainless, not further worked than cold-formed or cold-finished (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,530 N/A 3,530 3,883 4,236 4,589 (C)/(F) 7228 60 Bars and rods of alloy steel other than stainless, cold-formed or cold-finished and further worked or hot-formed and further worked, n.e.s. (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,530 N/A 3,530 3,883 4,236 4,589 (F) 7228 70 Angles, shapes and sections of alloy steel other than stainless, n.e.s. 3,530 N/A 3,530 3,883 4,236 4,589 (F) 7228 80 00 Hollow drill bars and rods, of alloy or non-alloy steel 3,530 N/A 3,530 3,883 4,236 4,589 (F) 7229 Wire of alloy steel other than stainless, in coils (excl. bars and rods) 3,530 N/A 3,530 3,883 4,236 4,589 (C)/(F) 7301 Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel 2,130 N/A 2,130 2,343 2,556 2,769 (C) 7302 Railway or tramway track construction material of iron or steel, the following : rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers "cross-ties", fish-plates, chairs, chair wedges, sole plates "base plates", rail clips, bedplates, ties and other material specialised for jointing or fixing rails 2,950 N/A 2,950 3,245 3,540 3,835 (C) 7303 Tubes, pipes and hollow profiles, of cast iron see below see below see below see below see below see below   7303 00 Tubes, pipes and hollow profiles, of cast iron 2,150 N/A 2,150 2,365 2,580 2,795   7304 Tubes, pipes and hollow profiles, seamless, of iron or steel (excl. products of cast iron) see below see below see below see below see below see below   7304 11 00 Line pipe of a kind used for oil or gas pipelines, seamless, of stainless steel 3,320 N/A 3,320 3,652 3,984 4,316   7304 19 Line pipe of a kind used for oil or gas pipelines, seamless, of iron or steel (excl. products of stainless steel or of cast iron) 2,110 N/A 2,110 2,321 2,532 2,743 (C) 7304 22 00 Drill pipe, seamless, of stainless steel, of a kind used in drilling for oil or gas 3,320 N/A 3,320 3,652 3,984 4,316   7304 23 00 Drill pipe, seamless, of a kind used in drilling for oil or gas, of iron or steel (excl. products of stainless steel or of cast iron) 2,110 N/A 2,110 2,321 2,532 2,743 (C) 7304 24 00 Casing and tubing, seamless, of a kind used for drilling for oil or gas, of stainless steel 3,320 N/A 3,320 3,652 3,984 4,316   7304 29 Casing and tubing, seamless, of iron or steel, of a kind used in drilling for oil or gas (excl. products of cast iron) 2,110 N/A 2,110 2,321 2,532 2,743 (C) 7304 31 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" (excl. cast iron products and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used for drilling for oil or gas) 2,110 N/A 2,110 2,321 2,532 2,743 (C) 7304 39 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, not cold-drawn or cold-rolled "cold-reduced" (excl. cast iron products, line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas) 2,110 N/A 2,110 2,321 2,532 2,743 (C) 7304 41 00 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas) 3,320 N/A 3,320 3,652 3,984 4,316   7304 49 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines or of a kind used for drilling for oil or gas) 3,320 N/A 3,320 3,652 3,984 4,316   7304 51 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil) 2,080 N/A 2,080 2,288 2,496 2,704 (F) 7304 59 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil) 2,080 N/A 2,080 2,288 2,496 2,704 (C)/(F) 7304 90 00 Tubes, pipes and hollow profiles, seamless, of non-circular cross-section, of iron or steel (excl. products of cast iron) 2,110 N/A 2,110 2,321 2,532 2,743 (C) 7305 Tubes and pipes, having circular cross-sections and an external diameter of > 406,4 mm, of flat-rolled products of iron or steel "e.g., welded, riveted or similarly closed" 2,130 N/A 2,130 2,343 2,556 2,769 (C) 7306 Tubes, pipes and hollow profiles "e.g., open seam or welded, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless tubes and pipes and tubes having internal and external circular cross-sections and an external diameter of > 406,4 mm) see below see below see below see below see below see below   7306 11 00 Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm 3,360 N/A 3,360 3,696 4,032 4,368   7306 19 00 Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron) 2,130 N/A 2,130 2,343 2,556 2,769 (C) 7306 21 00 Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm 3,360 N/A 3,360 3,696 4,032 4,368   7306 29 00 Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron) 2,130 N/A 2,130 2,343 2,556 2,769 (C) 7306 30 12 Precision tubes, welded, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" 2,130 N/A 2,130 2,343 2,556 2,769 (C) 7306 30 18 Precision tubes, welded, of circular cross-section, of iron or non-alloy steel (excl. cold-drawn or cold-rolled) 2,100 N/A 2,100 2,310 2,520 2,730   7306 30 41 Threaded or threadable tubes "gas pipe", welded, of circular cross-section, of iron or non-alloy steel, plated or coated with zinc 2,130 N/A 2,130 2,343 2,556 2,769 (C) 7306 30 49 Threaded or threadable tubes "gas pipe", welded, of circular cross-section, of iron or non-alloy steel (excl. products plated or coated with zinc) 2,130 N/A 2,130 2,343 2,556 2,769 (C) 7306 30 72 Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel, of an external diameter of <= 168,3 mm, plated or coated with zinc (excl. line pipe of a kind used for oil or gas pipelines or casing and tubingof a kind used in drilling for oil or gas) 2,130 N/A 2,130 2,343 2,556 2,769 (C) 7306 30 77 Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel of an external diameter of <= 168,3 mm (excl. plated or coated with zinc and line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used in drilling for oil or gas, precision tubes and threaded or threadable tubes "gas pipe") 2,130 N/A 2,130 2,343 2,556 2,769 (C) 7306 30 80 Tubes, pipes and hollow profiles, welded, having a circular cross-section, of iron or steel, of an external diameter of > 168,3 mm but <= 406,4 mm (excl. line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, or precision steel tubes, electrical conduit tubes or threaded or threadable tubes "gas pipe") 2,130 N/A 2,130 2,343 2,556 2,769 (C) 7306 40 20 Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. products having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) 3,360 N/A 3,360 3,696 4,032 4,368   7306 40 80 Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel (excl. products cold-drawn or cold-rolled "cold-reduced", tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) 3,330 N/A 3,330 3,663 3,996 4,329   7306 50 21 Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" 2,140 N/A 2,140 2,354 2,568 2,782 (F) 7306 50 29 Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless (excl. cold-drawn or cold-rolled) 2,110 N/A 2,110 2,321 2,532 2,743 (F) 7306 50 80 Tubes, pipes and hollow profiles, welded, of circular cross-section, of alloy steel other than stainless (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and precision steel tubes) 2,140 N/A 2,140 2,354 2,568 2,782 (F) 7306 61 10 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel 3,360 N/A 3,360 3,696 4,032 4,368   7306 61 92 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of <= 2 mm 2,130 N/A 2,130 2,343 2,556 2,769 (C) 7306 61 99 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of > 2 mm 2,130 N/A 2,130 2,343 2,556 2,769 (C) 7306 69 10 Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) 3,360 N/A 3,360 3,696 4,032 4,368   7306 69 90 Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of iron or steel other than stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) 2,130 N/A 2,130 2,343 2,556 2,769 (C) 7306 90 00 Tubes, pipes and hollow profiles "e.g., open seam, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless or welded tubes and pipes and tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm) 2,130 N/A 2,130 2,343 2,556 2,769 (C) 7307 Tube or pipe fittings "e.g. couplings, elbows, sleeves", of iron or steel see below see below see below see below see below see below   7307 11 Tube or pipe fittings of non-malleable cast iron 2,220 N/A 2,220 2,442 2,664 2,886   7307 19 10 Tube or pipe fittings of cast iron (excl. of non-malleable) 2,220 N/A 2,220 2,442 2,664 2,886   7307 19 90 Cast tube or pipe fittings of steel 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7307 21 00 Flanges of stainless steel (excl. cast products) 2,860 N/A 2,860 3,146 3,432 3,718   7307 22 Threaded elbows, bends and sleeves of stainless steel (excl. cast products) 2,860 N/A 2,860 3,146 3,432 3,718   7307 23 Butt welding tube or pipe fittings of stainless steel (excl. cast products) 2,860 N/A 2,860 3,146 3,432 3,718   7307 29 Tube or pipe fittings of stainless steel (excl. cast products, flanges, threaded elbows, bends and sleeves and butt weldings fittings) 2,860 N/A 2,860 3,146 3,432 3,718   7307 91 00 Flanges of iron or steel (excl. cast or stainless products) 2,110 N/A 2,110 2,321 2,532 2,743 (C) 7307 92 Threaded elbows, bends and sleeves, of stainless steel (excl. cast or stainless products) 2,110 N/A 2,110 2,321 2,532 2,743 (C) 7307 93 Butt welding fittings of iron or steel (excl. cast iron or stainless steel products, and flanges) 2,110 N/A 2,110 2,321 2,532 2,743 (C) 7307 99 Tube or pipe fittings, of iron or steel (excl. cast iron or stainless steel products; flanges; threaded elbows, bends and sleeves; butt welding fittings) 2,110 N/A 2,110 2,321 2,532 2,743 (C) 7308 Structures and parts of structures "e.g., bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns", of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel (excl. prefabricated buildings of heading 9406) 2,950 N/A 2,950 3,245 3,540 3,835 (C) 7309 Reservoirs, tanks, vats and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of > 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated (excl. containers specifically constructed or equipped for one or more types of transport) 3,160 N/A 3,160 3,476 3,792 4,108 (C) 7310 Tanks, casks, drums, cans, boxes and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of <= 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated, n.e.s. 2,130 N/A 2,130 2,343 2,556 2,769 (C) 7311 Containers of iron or steel, for compressed or liquefied gas (excl. containers specifically constructed or equipped for one or more types of transport) see below see below see below see below see below see below   7311 00 Containers of iron or steel, for compressed or liquefied gas (excl. containers specifically constructed or equipped for one or more types of transport) 3,130 N/A 3,130 3,443 3,756 4,069 (C) 7318 Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers, incl. spring washers, and similar articles, of iron or steel (excl. lag screws, stoppers, plugs and the like, threaded) see below see below see below see below see below see below   7318 11 00 Coach screws of iron or steel 2,100 N/A 2,100 2,310 2,520 2,730 (C) 7318 12 10 Wood screws of stainless steel (excl. coach screws) 3,300 N/A 3,300 3,630 3,960 4,290 (C) 7318 12 90 Wood screws of iron or steel other than stainless (excl. coach screws) 2,100 N/A 2,100 2,310 2,520 2,730 (C) 7318 13 00 Screw hooks and screw rings, of iron or steel 2,100 N/A 2,100 2,310 2,520 2,730 (C) 7318 14 10 Self-tapping screws, of stainless steel (excl. wood screws) 3,300 N/A 3,300 3,630 3,960 4,290 (C) 7318 14 91 Spaced-thread screws of iron or steel other than stainless 2,100 N/A 2,100 2,310 2,520 2,730 (C) 7318 14 99 Self-tapping screws of iron or steel other than stainless (excl. spaced-thread screws and wood screws) 2,100 N/A 2,100 2,310 2,520 2,730 (C) 7318 15 Threaded screws and bolts, of iron or steel, whether or not with their nuts and washers (excl. coach screws and other wood screws, screw hooks and screw rings, self-tapping screws, lag screws, stoppers, plugs and the like, threaded) 2,800 N/A 2,800 3,080 3,360 3,640 (C) 7318 16 Nuts of iron or steel 3,060 N/A 3,060 3,366 3,672 3,978 (C) 7318 19 00 Threaded articles, of iron or steel, n.e.s. 2,100 N/A 2,100 2,310 2,520 2,730 (C) 7318 21 00 Spring washers and other lock washers, of iron or steel 2,100 N/A 2,100 2,310 2,520 2,730 (C) 7318 22 00 Washers of iron or steel (excl. spring washers and other lock washers) 2,280 N/A 2,280 2,508 2,736 2,964 (C) 7318 23 00 Rivets of iron or steel (excl. tubular and bifurcated rivets for particular uses) 2,220 N/A 2,220 2,442 2,664 2,886 (C) 7318 24 00 Cotters and cotter pins, of iron or steel 2,100 N/A 2,100 2,310 2,520 2,730 (C) 7318 29 00 Non-threaded articles, of iron or steel 2,100 N/A 2,100 2,310 2,520 2,730 (C) 7326 Articles of iron or steel, n.e.s. (excl. cast articles) see below see below see below see below see below see below   7326 11 00 Grinding balls and similar articles for mills, of iron or steel, forged or stamped, but not further worked 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7326 19 Articles of iron or steel, forged or stamped, but not further worked, n.e.s. (excl. grinding balls and similar articles for mills) 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7326 20 00 Articles of iron or steel wire, n.e.s. 2,100 N/A 2,100 2,310 2,520 2,730 (C) 7326 90 30 Ladders and steps, of iron or steel 2,100 N/A 2,100 2,310 2,520 2,730 (C) 7326 90 40 Pallets and similar platforms for handling goods, of iron or steel 2,100 N/A 2,100 2,310 2,520 2,730 (C) 7326 90 50 Reels for cables, piping and the like, of iron or steel 2,100 N/A 2,100 2,310 2,520 2,730 (C) 7326 90 60 Ventilators, non-mechanical, guttering, hooks and like articles used in the building industry, n.e.s., of iron or steel 2,100 N/A 2,100 2,310 2,520 2,730 (C) 7326 90 92 Articles of iron or steel, open-die forged, n.e.s. 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7326 90 94 Articles of iron or steel, closed-die forged, n.e.s. 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7326 90 96 Sintered articles of iron or steel, n.e.s. 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7326 90 98 Articles of iron or steel, n.e.s. 2,130 N/A 2,130 2,343 2,556 2,769 (C) Jordan Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – – – –   2523 10 00 White clinker 1,290 0,040 1,330 1,463 1,596 1,729 (B) 2523 10 00 Grey clinker – – – – – –   2523 21 00 White Portland cement 1,270 0,140 1,410 1,551 1,692 1,833   2523 29 00 Grey Portland cement – – – – – –   2523 90 00 White hydraulic cements – – – – – –   2523 90 00 Grey hydraulic cements – – – – – –   2523 30 00 Aluminous cement – – – – – –   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 2,490 0,040 2,520 2,545 2,545 2,545   2814 10 00 Anhydrous ammonia – – – – – –   2814 20 00 Ammonia in aqueous solution 0,610 0,030 0,650 0,657 0,657 0,657   2834 21 00 Nitrate of potassium 2,020 0,050 2,070 2,091 2,091 2,091   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,460 0,030 0,490 0,495 0,495 0,495   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,760 0,030 0,780 0,788 0,788 0,788   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,370 0,090 1,460 1,475 1,475 1,475   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,340 0,080 1,430 1,444 1,444 1,444   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,600 0,060 0,660 0,667 0,667 0,667   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,310 0,070 1,380 1,394 1,394 1,394   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,530 0,060 1,580 1,596 1,596 1,596   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,350 0,080 2,440 2,464 2,464 2,464   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,020 0,080 2,090 2,111 2,111 2,111   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,020 0,080 2,090 2,111 2,111 2,111   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 3,880 0,060 3,940 3,979 3,979 3,979   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,970 0,070 2,050 2,071 2,071 2,071   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,490 0,070 1,550 1,566 1,566 1,566   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,530 0,080 1,610 1,626 1,626 1,626   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,760 0,070 0,820 0,828 0,828 0,828   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,990 0,080 1,070 1,081 1,081 1,081   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,670 0,060 0,730 0,737 0,737 0,737   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,480 0,050 0,530 0,535 0,535 0,535   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,310 0,040 0,340 0,343 0,343 0,343   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,360 0,100 1,460 1,475 1,475 1,475   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,550 0,090 0,640 0,646 0,646 0,646   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,330 0,060 1,390 1,404 1,404 1,404   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,680 0,040 0,720 0,727 0,727 0,727   Aluminium         10 % mark-up 20 % mark-up 30 % mark-up   7601 Unwrought aluminium 0,360 N/A 0,360 0,396 0,432 0,468 (L) 7603 Aluminium powders and flakes 0,470 N/A 0,470 0,517 0,564 0,611 (L) 7604 10 10 Bars and rods 0,700 N/A 0,700 0,770 0,840 0,910 (L) 7604 10 90 Profiles 0,710 N/A 0,710 0,781 0,852 0,923 (L) 7604 21 00 Hollow profiles 0,710 N/A 0,710 0,781 0,852 0,923 (L) 7604 29 10 Bars and rods 0,700 N/A 0,700 0,770 0,840 0,910 (L) 7604 29 90 Profiles 0,710 N/A 0,710 0,781 0,852 0,923 (L) 7605 Aluminium wire 0,700 N/A 0,700 0,770 0,840 0,910 (L) 7606 Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm 1,150 N/A 1,150 1,265 1,380 1,495 (L) 7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm 1,150 N/A 1,150 1,265 1,380 1,495 (L) 7608 Aluminium tubes and pipes 0,710 N/A 0,710 0,781 0,852 0,923 (L) 7609 00 00 Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) 0,710 N/A 0,710 0,781 0,852 0,923 (L) 7610 10 00 Doors, windows and their frames and thresholds for doors 0,710 N/A 0,710 0,781 0,852 0,923 (L) 7610 90 Other 0,710 N/A 0,710 0,781 0,852 0,923 (L) 7610 90 10 Bridges and bridge-sections, towers and lattice masts 0,710 N/A 0,710 0,781 0,852 0,923 (L) 7610 90 90 Other 0,710 N/A 0,710 0,781 0,852 0,923 (L) 7611 00 00 Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 1,150 N/A 1,150 1,265 1,380 1,495 (L) 7612 Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 1,150 N/A 1,150 1,265 1,380 1,495 (L) 7613 00 00 Aluminium containers for compressed or liquefied gas 1,150 N/A 1,150 1,265 1,380 1,495 (L) 7614 Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated 0,700 N/A 0,700 0,770 0,840 0,910 (L) 7616 10 00 Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles 1,150 N/A 1,150 1,265 1,380 1,495 (L) 7616 91 00 Cloth, grill, netting and fencing, of aluminium wire 1,150 N/A 1,150 1,265 1,380 1,495 (L) 7616 99 10 Cast 0,470 N/A 0,470 0,517 0,564 0,611 (L) 7616 99 90 Other 1,150 N/A 1,150 1,265 1,380 1,495 (L) Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 14,030 N/A 14,030 15,433 16,836 18,239   Iron and steel         10 % mark-up 20 % mark-up 30 % mark-up   7202 11 Ferro-manganese, containing by weight > 2% of carbon 1,690 N/A 1,690 1,859 2,028 2,197   7202 19 Ferro-manganese, containing by weight <= 2% carbon _ _ _ _ _ _   7202 41 Ferro-chromium, containing by weight > 4% of carbon 2,350 N/A 2,350 2,585 2,820 3,055   7202 49 Ferro-chromium, containing by weight <= 4% of carbon _ _ _ _ _ _   7202 60 00 Ferro-nickel 3,480 N/A 3,480 3,828 4,176 4,524   Kazakhstan Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – – – –   2523 10 00 White clinker – – – – – –   2523 10 00 Grey clinker 1,350 0,040 1,390 1,529 1,668 1,807 (A) 2523 21 00 White Portland cement – – – – – –   2523 29 00 Grey Portland cement 1,350 0,070 1,420 1,562 1,704 1,846   2523 90 00 White hydraulic cements – – – – – –   2523 90 00 Grey hydraulic cements 1,280 0,070 1,350 1,485 1,620 1,755 (A) 2523 30 00 Aluminous cement – – – – – –   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 2,730 0,040 2,770 2,798 2,798 2,798   2814 10 00 Anhydrous ammonia 2,160 0,140 2,300 2,323 2,323 2,323   2814 20 00 Ammonia in aqueous solution 0,650 0,040 0,690 0,697 0,697 0,697   2834 21 00 Nitrate of potassium 2,200 0,070 2,270 2,293 2,293 2,293   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,490 0,040 0,520 0,525 0,525 0,525   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,810 0,040 0,840 0,848 0,848 0,848   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,470 0,110 1,580 1,596 1,596 1,596   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,440 0,110 1,540 1,555 1,555 1,555   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,640 0,080 0,720 0,727 0,727 0,727   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,420 0,090 1,510 1,525 1,525 1,525   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,670 0,070 1,740 1,757 1,757 1,757   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,570 0,110 2,670 2,697 2,697 2,697   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,200 0,100 2,300 2,323 2,323 2,323   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,200 0,100 2,300 2,323 2,323 2,323   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 4,260 0,070 4,330 4,373 4,373 4,373   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,150 0,090 2,250 2,273 2,273 2,273   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,610 0,080 1,700 1,717 1,717 1,717   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,650 0,100 1,750 1,768 1,768 1,768   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,820 0,080 0,900 0,909 0,909 0,909   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,080 0,100 1,180 1,192 1,192 1,192   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,730 0,080 0,800 0,808 0,808 0,808   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,510 0,060 0,570 0,576 0,576 0,576   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,320 0,050 0,370 0,374 0,374 0,374   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,480 0,120 1,600 1,616 1,616 1,616   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,590 0,100 0,690 0,697 0,697 0,697   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,450 0,070 1,520 1,535 1,535 1,535   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,740 0,050 0,790 0,798 0,798 0,798   Aluminium         10 % mark-up 20 % mark-up 30 % mark-up   7601 Unwrought aluminium 1,870 N/A 1,870 2,057 2,244 2,431 (K) 7603 Aluminium powders and flakes 1,990 N/A 1,990 2,189 2,388 2,587 (K) 7604 10 10 Bars and rods 2,210 N/A 2,210 2,431 2,652 2,873 (K) 7604 10 90 Profiles 2,230 N/A 2,230 2,453 2,676 2,899 (K) 7604 21 00 Hollow profiles 2,230 N/A 2,230 2,453 2,676 2,899 (K) 7604 29 10 Bars and rods 2,210 N/A 2,210 2,431 2,652 2,873 (K) 7604 29 90 Profiles 2,230 N/A 2,230 2,453 2,676 2,899 (K) 7605 Aluminium wire 2,210 N/A 2,210 2,431 2,652 2,873 (K) 7606 Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm 2,670 N/A 2,670 2,937 3,204 3,471 (K) 7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm 2,670 N/A 2,670 2,937 3,204 3,471 (K) 7608 Aluminium tubes and pipes 2,230 N/A 2,230 2,453 2,676 2,899 (K) 7609 00 00 Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) 2,230 N/A 2,230 2,453 2,676 2,899 (K) 7610 10 00 Doors, windows and their frames and thresholds for doors 2,230 N/A 2,230 2,453 2,676 2,899 (K) 7610 90 Other 2,230 N/A 2,230 2,453 2,676 2,899 (K) 7610 90 10 Bridges and bridge-sections, towers and lattice masts 2,230 N/A 2,230 2,453 2,676 2,899 (K) 7610 90 90 Other 2,230 N/A 2,230 2,453 2,676 2,899 (K) 7611 00 00 Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 2,670 N/A 2,670 2,937 3,204 3,471 (K) 7612 Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 2,670 N/A 2,670 2,937 3,204 3,471 (K) 7613 00 00 Aluminium containers for compressed or liquefied gas 2,670 N/A 2,670 2,937 3,204 3,471 (K) 7614 Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated 2,210 N/A 2,210 2,431 2,652 2,873 (K) 7616 10 00 Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles 2,670 N/A 2,670 2,937 3,204 3,471 (K) 7616 91 00 Cloth, grill, netting and fencing, of aluminium wire 2,670 N/A 2,670 2,937 3,204 3,471 (K) 7616 99 10 Cast 1,990 N/A 1,990 2,189 2,388 2,587 (K) 7616 99 90 Other 2,670 N/A 2,670 2,937 3,204 3,471 (K) Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066   Iron and steel         10 % mark-up 20 % mark-up 30 % mark-up   2601 12 00 Agglomerated iron ores and concentrates (excl. roasted iron pyrites) 0,170 0,170 0,340 0,374 0,408 0,442   7201 Pig iron and spiegeleisen, in pigs, blocks or other primary forms 4,960 N/A 4,960 5,456 5,952 6,448   7202 11 Ferro-manganese, containing by weight > 2% of carbon 1,690 N/A 1,690 1,859 2,028 2,197   7202 19 Ferro-manganese, containing by weight <= 2% carbon – N/A – – – –   7202 41 Ferro-chromium, containing by weight > 4% of carbon 2,350 N/A 2,350 2,585 2,820 3,055   7202 49 Ferro-chromium, containing by weight <= 4% of carbon 2,870 N/A 2,870 3,157 3,444 3,731   7202 60 00 Ferro-nickel 3,480 N/A 3,480 3,828 4,176 4,524   7203 Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99,94%, in lumps, pellets or similar forms – N/A – – – –   7205 Granules and powders of pig iron, spiegeleisen, iron or steel (excl. granules and powders of ferro-alloys, turnings and filings of iron or steel, radioactive iron powders "isotopes" and certain low-calibre, substandard balls for ballbearings) 4,990 N/A 4,990 5,489 5,988 6,487 (C) 7206 Iron and non-alloy steel in ingots or other primary forms (excl. remelting scrap ingots, products obtained by continuous casting and iron of heading 7203) see below see below see below see below see below see below   7206 10 00 Ingots, of iron and non-alloy steel (excl. remelted scrap ingots, continuous cast products, iron of heading 7203) 5,180 N/A 5,180 5,698 6,216 6,734 (C) 7206 90 00 Iron and non-alloy steel, in puddled bars or other primary forms (excl. ingots, remelted scrap ingots, continuous cast products, iron of heading 7203) 5,180 N/A 5,180 5,698 6,216 6,734 (C) 7207 Semi-finished products of iron or non-alloy steel see below see below see below see below see below see below   7207 11 11 Semi-finished products, of non-alloy free-cutting steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting 5,180 N/A 5,180 5,698 6,216 6,734 (C) 7207 11 14 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness of <= 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel) 5,180 N/A 5,180 5,698 6,216 6,734 (C) 7207 11 16 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness of > 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel) 5,180 N/A 5,180 5,698 6,216 6,734 (C) 7207 11 90 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular cross-section, the width < twice the thickness, forged 5,180 N/A 5,180 5,698 6,216 6,734 (C) 7207 12 10 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtained by continuous casting 5,180 N/A 5,180 5,698 6,216 6,734 (C) 7207 12 90 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular "other than square" cross-section, the width >= twice the thickness, forged 5,180 N/A 5,180 5,698 6,216 6,734 (C) 7207 19 12 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting 5,180 N/A 5,180 5,698 6,216 6,734 (C) 7207 19 19 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, forged 5,180 N/A 5,180 5,698 6,216 6,734 (C) 7207 19 80 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon (excl. semi-products, of square, rectangular, circular or polygonal cross-section) 5,180 N/A 5,180 5,698 6,216 6,734 (C) 7207 20 11 Semi-finished products, of non-alloy free-cutting steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting 5,180 N/A 5,180 5,698 6,216 6,734 (C) 7207 20 15 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% but < 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel) 5,180 N/A 5,180 5,698 6,216 6,734 (C) 7207 20 17 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel) 5,180 N/A 5,180 5,698 6,216 6,734 (C) 7207 20 19 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, forged 5,180 N/A 5,180 5,698 6,216 6,734 (C) 7207 20 32 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtained by continuous casting 5,180 N/A 5,180 5,698 6,216 6,734 (C) 7207 20 39 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of rectangular "other than square" cross-section and the width >= twice the thickness, forged 5,180 N/A 5,180 5,698 6,216 6,734 (C) 7207 20 52 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting 5,180 N/A 5,180 5,698 6,216 6,734 (C) 7207 20 59 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of circular or polygonal cross-section, forged 5,180 N/A 5,180 5,698 6,216 6,734 (C) 7207 20 80 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon (excl. those of square, rectangular, circular or polygonal cross-section) 5,180 N/A 5,180 5,698 6,216 6,734 (C) 7208 Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled, not clad, plated or coated 5,290 N/A 5,290 5,819 6,348 6,877 (C) 7209 Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, cold-rolled "cold-reduced", not clad, plated or coated 5,360 N/A 5,360 5,896 6,432 6,968 (C) 7210 Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated 5,360 N/A 5,360 5,896 6,432 6,968 (C) 7211 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", not clad, plated or coated see below see below see below see below see below see below   7211 13 00 Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as "wide flats" 5,290 N/A 5,290 5,819 6,348 6,877 (C) 7211 14 00 Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, not further worked than hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm (excl. "wide flats") 5,290 N/A 5,290 5,819 6,348 6,877 (C) 7211 19 00 Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, simply hot-rolled, not clad, plated or coated, of a thickness < 4,75 mm (excl. "wide flats") 5,290 N/A 5,290 5,819 6,348 6,877 (C) 7211 23 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight < 0,25% of carbon 5,360 N/A 5,360 5,896 6,432 6,968 (C) 7211 29 00 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight >= 0,25% of carbon 5,360 N/A 5,360 5,896 6,432 6,968 (C) 7211 90 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked, but not clad, plated or coated 5,360 N/A 5,360 5,896 6,432 6,968 (C) 7212 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated 5,360 N/A 5,360 5,896 6,432 6,968 (C) 7213 Bars and rods of iron or non-alloy steel, hot-rolled, in irregularly wound coils 5,180 N/A 5,180 5,698 6,216 6,734 (C) 7214 Bars and rods, of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but incl. those twisted after rolling (excl. in irregularly wound coils) see below see below see below see below see below see below   7214 10 00 Bars and rods, of iron or non-alloy steel, not further worked than forged (excl. in irregularly wound coils) 5,180 N/A 5,180 5,698 6,216 6,734 (C) 7214 20 00 Bars and rods, of iron or non-alloy steel, with indentations, ribs, groves or other deformations produced during the rolling process 5,180 N/A 5,180 5,698 6,216 6,734 (C) 7214 30 00 Bars and rods, of non-alloy free-cutting steel, not further worked than hot-rolled, hot-drawn or hot-extruded (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling) 5,180 N/A 5,180 5,698 6,216 6,734 (C) 7214 91 Bars and rods, of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, of rectangular "other than square" cross-section (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process, bars and rods twisted after rolling and free-cutting steel) 5,180 N/A 5,180 5,698 6,216 6,734 (C) 7214 99 Bars and rods, of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded (excl. of rectangular [other than square] cross-section and those containing indentations, ribs, grooves or other deformations produced during the rolling process, and of non-alloy free-cutting steel) 5,180 N/A 5,180 5,698 6,216 6,734 (C) 7215 Bars and rods, of iron or non-alloy steel, cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked, n.e.s. 5,180 N/A 5,180 5,698 6,216 6,734 (C) 7216 Angles, shapes and sections of iron or non-alloy steel, n.e.s. 5,180 N/A 5,180 5,698 6,216 6,734 (C) 7217 Wire of iron or non-alloy steel, in coils (excl. bars and rods) see below see below see below see below see below see below   7217 10 Wire of iron or non-alloy steel, in coils, not plated or coated, whether or not polished (excl. bars and rods) 5,180 N/A 5,180 5,698 6,216 6,734 (C) 7217 20 Wire of iron or non-alloy steel, in coils, plated or coated with zinc (excl. bars and rods) 5,180 N/A 5,180 5,698 6,216 6,734 (C) 7217 30 Wire of iron or non-alloy steel, in coils, plated or coated with base metals (excl. plated or coated with zinc, and bars and rods) 5,180 N/A 5,180 5,698 6,216 6,734 (C) 7217 90 Wire of iron or non-alloy steel, in coils, plated or coated (excl. plated or coated with base metals, and bars and rods) 5,180 N/A 5,180 5,698 6,216 6,734 (C) 7218 Stainless steel in ingots or other primary forms (excl. remelting scrap ingots and products obtained by continuous casting); semi-finished products of stainless steel see below see below see below see below see below see below   7218 10 00 Steel, stainless, in ingots and other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) 4,600 N/A 4,600 5,060 5,520 5,980   7218 91 Semi-finished products of stainless steel, of rectangular "other than square" cross-section 4,780 N/A 4,780 5,258 5,736 6,214   7218 99 11 Semi-finished products of stainless steel, of square cross-section, rolled or obtained by continuous casting 4,780 N/A 4,780 5,258 5,736 6,214   7218 99 19 Semi-finished products of stainless steel, of square cross-section, forged 4,600 N/A 4,600 5,060 5,520 5,980   7218 99 20 Semi-finished products of stainless steel, of circular cross-section or of cross-section other than square or rectangular, rolled or obtained by continuous casting 4,780 N/A 4,780 5,258 5,736 6,214   7218 99 80 Semi-finished products of stainless steel, forged (excl. products of square or rectangular cross-section) 4,600 N/A 4,600 5,060 5,520 5,980   7219 Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7219 11 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of > 10 mm 4,780 N/A 4,780 5,258 5,736 6,214   7219 12 Flat-rolled products of stainless steel, of a width of>= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 4,7 mm and <= 10 mm 4,780 N/A 4,780 5,258 5,736 6,214   7219 13 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 3 mm and < 4,75 mm 4,780 N/A 4,780 5,258 5,736 6,214   7219 14 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of < 3 mm 4,780 N/A 4,780 5,258 5,736 6,214   7219 21 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of > 10 mm 4,780 N/A 4,780 5,258 5,736 6,214   7219 22 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 4,75 mm and <= 10 mm 4,780 N/A 4,780 5,258 5,736 6,214   7219 23 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 3 mm and < 4,75 mm 4,780 N/A 4,780 5,258 5,736 6,214   7219 24 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of < 3 mm 4,780 N/A 4,780 5,258 5,736 6,214   7219 31 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 4,75 mm 4,860 N/A 4,860 5,346 5,832 6,318   7219 32 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 3 mm but < 4,75 mm 4,860 N/A 4,860 5,346 5,832 6,318   7219 33 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of > 1 mm but < 3 mm 4,860 N/A 4,860 5,346 5,832 6,318   7219 34 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 0,5 mm but <= 1 mm 4,860 N/A 4,860 5,346 5,832 6,318   7219 35 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of < 0,5 mm 4,860 N/A 4,860 5,346 5,832 6,318   7219 90 Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked 4,860 N/A 4,860 5,346 5,832 6,318   7220 Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7220 11 00 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of >= 4,75 mm 4,780 N/A 4,780 5,258 5,736 6,214   7220 12 00 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of < 4,75 mm 4,780 N/A 4,780 5,258 5,736 6,214   7220 20 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" 4,860 N/A 4,860 5,346 5,832 6,318   7220 90 Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked 4,860 N/A 4,860 5,346 5,832 6,318   7221 Bars and rods of stainless steel, hot-rolled, in irregularly wound coils 4,610 N/A 4,610 5,071 5,532 5,993   7222 Other bars and rods of stainless steel; angles, shapes and sections of stainless steel, n.e.s. see below see below see below see below see below see below   7222 11 Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only hot-extruded, of circular cross-section 4,610 N/A 4,610 5,071 5,532 5,993   7222 19 Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only extruded (excl. of circular cross-section) 4,610 N/A 4,610 5,071 5,532 5,993   7222 20 Other bars and rods of stainless steel, not further worked than cold-formed or cold-finished 4,610 N/A 4,610 5,071 5,532 5,993   7222 30 Other bars and rods of stainless steel, cold-formed or cold-finished and further worked, or not further worked than forged, or forged, or hot-formed by other means and further worked, n.e.s. 4,600 N/A 4,600 5,060 5,520 5,980   7222 40 Angles, shapes and sections of stainless steel, n.e.s. 4,610 N/A 4,610 5,071 5,532 5,993   7223 Wire of stainless steel, in coils (excl. bars and rods) see below see below see below see below see below see below   7223 00 Wire of stainless steel, in coils (excl. bars and rods) 4,610 N/A 4,610 5,071 5,532 5,993   7224 Steel, alloy, other than stainless, in ingots or other primary forms, semi-finished products of alloy steel other than stainless (excl. waste and scrap in ingot form, and products obtained by continuous casting) see below see below see below see below see below see below   7224 10 Steel, alloy, other than stainless, in ingots or other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) 5,170 N/A 5,170 5,687 6,204 6,721 (F) 7224 90 02 Semi-finished products of tool steel 5,340 N/A 5,340 5,874 6,408 6,942 (F) 7224 90 03 Semi-finished products of high-speed steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting the width measuring < twice the thickness 5,340 N/A 5,340 5,874 6,408 6,942 (F) 7224 90 05 Semi-finished products of steel containing by weight <= 0,7% of carbon, 0,5% to 1,2% of manganese, 0,6% to 2,3% of silicon, or of steel containing by weight >= 0,0008% of boron with any other element < the minimum content referred to in Note 1 f to chapter 72, of square or rectangular cross-section, hot rolled or obtained by continuous casting, the width measuring < twice the thickness 5,340 N/A 5,340 5,874 6,408 6,942 (F) 7224 90 07 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring < twice the thickness (excl. of tool steel, high-speed steel and articles of subheading 7224.90.05) 5,340 N/A 5,340 5,874 6,408 6,942 (F) 7224 90 14 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring >= twice the thickness (excl. of tool steel) 5,340 N/A 5,340 5,874 6,408 6,942 (F) 7224 90 18 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, forged (excl. of tool steel) 5,170 N/A 5,170 5,687 6,204 6,721 (F) 7224 90 31 Semi-finished products of steel containing by weight 0,9% to 1,15% carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting 5,340 N/A 5,340 5,874 6,408 6,942 (F) 7224 90 38 Semi-finished products of alloy steel, other than stainless steel, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting (excl. of tool steel and products containing by weight 0,9% to 1,15% of carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum) 5,340 N/A 5,340 5,874 6,408 6,942 (F) 7224 90 90 Semi-finished products of alloy steel, other than stainless steel, forged (excl. of tool steel and products of square or rectangular, circular or polygamol cross-section) 5,170 N/A 5,170 5,687 6,204 6,721 (F) 7225 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7225 11 00 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, grain-oriented 6,780 N/A 6,780 7,458 8,136 8,814 (C) 7225 19 10 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, hot-rolled 5,340 N/A 5,340 5,874 6,408 6,942 (C) 7225 19 90 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, cold-rolled "cold-reduced", non-grain-oriented 5,420 N/A 5,420 5,962 6,504 7,046 (F) 7225 30 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, in coils (excl. products of silicon-electrical steel) 5,340 N/A 5,340 5,874 6,408 6,942 (F) 7225 40 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, not in coils (excl. products of silicon-electrical steel) 5,340 N/A 5,340 5,874 6,408 6,942 (F) 7225 50 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of silicon-electrical steel) 5,420 N/A 5,420 5,962 6,504 7,046 (F) 7225 91 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and electrolytically plated or coated with zinc (excl. products of silicon-electrical steel) 5,420 N/A 5,420 5,962 6,504 7,046 (F) 7225 92 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and plated or coated with zinc (excl. electrolytically plated or coated and products of silicon-electrical steel) 5,420 N/A 5,420 5,962 6,504 7,046 (F) 7225 99 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. plated or coated with zinc and products of silicon-electrical steel) 5,420 N/A 5,420 5,962 6,504 7,046 (F) 7226 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7226 11 00 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", grain-oriented 6,780 N/A 6,780 7,458 8,136 8,814 (C) 7226 19 10 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, not further worked than hot-rolled 5,340 N/A 5,340 5,874 6,408 6,942 (C) 7226 19 80 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, cold-rolled "cold-reduced", whether or not further worked, or hot-rolled and further worked, non-grain-oriented 5,420 N/A 5,420 5,962 6,504 7,046 (F) 7226 20 00 Flat-rolled products of high-speed steel, of a width of <= 600 mm, hot-rolled or cold-rolled "cold-reduced" 5,340 N/A 5,340 5,874 6,408 6,942 (F) 7226 91 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than hot-rolled (excl. products of high-speed steel or silicon-electrical steel) 5,340 N/A 5,340 5,874 6,408 6,942 (F) 7226 92 00 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of high-speed steel or silicon-electrical steel) 5,420 N/A 5,420 5,962 6,504 7,046 (F) 7226 99 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. products of high-speed steel or silicon-electrical steel) 5,420 N/A 5,420 5,962 6,504 7,046 (F) 7227 Bars and rods of alloy steel other than stainless, hot-rolled, in irregularly wound coils 5,170 N/A 5,170 5,687 6,204 6,721 (C)/(F) 7228 Other bars and rods of alloy steel other than stainless, angles, shapes and sections of alloy steel other than stainless, n.e.s.; hollow drill bars and rods, of alloy or non-alloy steel see below see below see below see below see below see below   7228 10 20 Bars and rods of high-speed steel, not further worked than hot-rolled, hot-drawn or extruded, and hot-rolled, hot-drawn or extruded, not further worked than clad (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 5,170 N/A 5,170 5,687 6,204 6,721 (F) 7228 10 50 Bars and rods of high-speed steel, forged (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 5,170 N/A 5,170 5,687 6,204 6,721 (F) 7228 10 90 Bars and rods of high-speed steel, not further worked than cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked (excl. forged products, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 5,170 N/A 5,170 5,687 6,204 6,721 (F) 7228 20 Bars and rods of silico-manganese steel (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 5,170 N/A 5,170 5,687 6,204 6,721 (F) 7228 30 Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 5,170 N/A 5,170 5,687 6,204 6,721 (C)/(F) 7228 40 Bars and rods of alloy steel other than stainless, not further worked than forged (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 5,170 N/A 5,170 5,687 6,204 6,721 (F) 7228 50 Bars and rods of alloy steel other than stainless, not further worked than cold-formed or cold-finished (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 5,170 N/A 5,170 5,687 6,204 6,721 (C)/(F) 7228 60 Bars and rods of alloy steel other than stainless, cold-formed or cold-finished and further worked or hot-formed and further worked, n.e.s. (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 5,170 N/A 5,170 5,687 6,204 6,721 (F) 7228 70 Angles, shapes and sections of alloy steel other than stainless, n.e.s. 5,170 N/A 5,170 5,687 6,204 6,721 (F) 7228 80 00 Hollow drill bars and rods, of alloy or non-alloy steel 5,170 N/A 5,170 5,687 6,204 6,721 (F) 7229 Wire of alloy steel other than stainless, in coils (excl. bars and rods) 5,170 N/A 5,170 5,687 6,204 6,721 (C)/(F) 7301 Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel 5,360 N/A 5,360 5,896 6,432 6,968 (C) 7302 Railway or tramway track construction material of iron or steel, the following : rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers "cross-ties", fish-plates, chairs, chair wedges, sole plates "base plates", rail clips, bedplates, ties and other material specialised for jointing or fixing rails 5,180 N/A 5,180 5,698 6,216 6,734 (C) 7303 Tubes, pipes and hollow profiles, of cast iron see below see below see below see below see below see below   7303 00 Tubes, pipes and hollow profiles, of cast iron 4,960 N/A 4,960 5,456 5,952 6,448   7304 Tubes, pipes and hollow profiles, seamless, of iron or steel (excl. products of cast iron) see below see below see below see below see below see below   7304 11 00 Line pipe of a kind used for oil or gas pipelines, seamless, of stainless steel 4,610 N/A 4,610 5,071 5,532 5,993   7304 19 Line pipe of a kind used for oil or gas pipelines, seamless, of iron or steel (excl. products of stainless steel or of cast iron) 5,180 N/A 5,180 5,698 6,216 6,734 (C) 7304 22 00 Drill pipe, seamless, of stainless steel, of a kind used in drilling for oil or gas 4,610 N/A 4,610 5,071 5,532 5,993   7304 23 00 Drill pipe, seamless, of a kind used in drilling for oil or gas, of iron or steel (excl. products of stainless steel or of cast iron) 5,180 N/A 5,180 5,698 6,216 6,734 (C) 7304 24 00 Casing and tubing, seamless, of a kind used for drilling for oil or gas, of stainless steel 4,610 N/A 4,610 5,071 5,532 5,993   7304 29 Casing and tubing, seamless, of iron or steel, of a kind used in drilling for oil or gas (excl. products of cast iron) 5,180 N/A 5,180 5,698 6,216 6,734 (C) 7304 31 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" (excl. cast iron products and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used for drilling for oil or gas) 5,180 N/A 5,180 5,698 6,216 6,734 (C) 7304 39 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, not cold-drawn or cold-rolled "cold-reduced" (excl. cast iron products, line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas) 5,180 N/A 5,180 5,698 6,216 6,734 (C) 7304 41 00 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas) 4,610 N/A 4,610 5,071 5,532 5,993   7304 49 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines or of a kind used for drilling for oil or gas) 4,610 N/A 4,610 5,071 5,532 5,993   7304 51 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil) 5,120 N/A 5,120 5,632 6,144 6,656 (F) 7304 59 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil) 5,120 N/A 5,120 5,632 6,144 6,656 (C)/(F) 7304 90 00 Tubes, pipes and hollow profiles, seamless, of non-circular cross-section, of iron or steel (excl. products of cast iron) 5,180 N/A 5,180 5,698 6,216 6,734 (C) 7305 Tubes and pipes, having circular cross-sections and an external diameter of > 406,4 mm, of flat-rolled products of iron or steel "e.g., welded, riveted or similarly closed" 5,360 N/A 5,360 5,896 6,432 6,968 (C) 7306 Tubes, pipes and hollow profiles "e.g., open seam or welded, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless tubes and pipes and tubes having internal and external circular cross-sections and an external diameter of > 406,4 mm) see below see below see below see below see below see below   7306 11 00 Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm 4,860 N/A 4,860 5,346 5,832 6,318   7306 19 00 Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron) 5,360 N/A 5,360 5,896 6,432 6,968 (C) 7306 21 00 Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm 4,860 N/A 4,860 5,346 5,832 6,318   7306 29 00 Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron) 5,360 N/A 5,360 5,896 6,432 6,968 (C) 7306 30 12 Precision tubes, welded, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" 5,360 N/A 5,360 5,896 6,432 6,968 (C) 7306 30 18 Precision tubes, welded, of circular cross-section, of iron or non-alloy steel (excl. cold-drawn or cold-rolled) 5,290 N/A 5,290 5,819 6,348 6,877   7306 30 41 Threaded or threadable tubes "gas pipe", welded, of circular cross-section, of iron or non-alloy steel, plated or coated with zinc 5,360 N/A 5,360 5,896 6,432 6,968 (C) 7306 30 49 Threaded or threadable tubes "gas pipe", welded, of circular cross-section, of iron or non-alloy steel (excl. products plated or coated with zinc) 5,360 N/A 5,360 5,896 6,432 6,968 (C) 7306 30 72 Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel, of an external diameter of <= 168,3 mm, plated or coated with zinc (excl. line pipe of a kind used for oil or gas pipelines or casing and tubingof a kind used in drilling for oil or gas) 5,360 N/A 5,360 5,896 6,432 6,968 (C) 7306 30 77 Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel of an external diameter of <= 168,3 mm (excl. plated or coated with zinc and line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used in drilling for oil or gas, precision tubes and threaded or threadable tubes "gas pipe") 5,360 N/A 5,360 5,896 6,432 6,968 (C) 7306 30 80 Tubes, pipes and hollow profiles, welded, having a circular cross-section, of iron or steel, of an external diameter of > 168,3 mm but <= 406,4 mm (excl. line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, or precision steel tubes, electrical conduit tubes or threaded or threadable tubes "gas pipe") 5,360 N/A 5,360 5,896 6,432 6,968 (C) 7306 40 20 Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. products having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) 4,860 N/A 4,860 5,346 5,832 6,318   7306 40 80 Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel (excl. products cold-drawn or cold-rolled "cold-reduced", tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) 4,780 N/A 4,780 5,258 5,736 6,214   7306 50 21 Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" 5,420 N/A 5,420 5,962 6,504 7,046 (F) 7306 50 29 Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless (excl. cold-drawn or cold-rolled) 5,340 N/A 5,340 5,874 6,408 6,942 (F) 7306 50 80 Tubes, pipes and hollow profiles, welded, of circular cross-section, of alloy steel other than stainless (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and precision steel tubes) 5,420 N/A 5,420 5,962 6,504 7,046 (F) 7306 61 10 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel 4,860 N/A 4,860 5,346 5,832 6,318   7306 61 92 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of <= 2 mm 5,360 N/A 5,360 5,896 6,432 6,968 (C) 7306 61 99 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of > 2 mm 5,360 N/A 5,360 5,896 6,432 6,968 (C) 7306 69 10 Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) 4,860 N/A 4,860 5,346 5,832 6,318   7306 69 90 Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of iron or steel other than stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) 5,360 N/A 5,360 5,896 6,432 6,968 (C) 7306 90 00 Tubes, pipes and hollow profiles "e.g., open seam, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless or welded tubes and pipes and tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm) 5,360 N/A 5,360 5,896 6,432 6,968 (C) 7307 Tube or pipe fittings "e.g. couplings, elbows, sleeves", of iron or steel see below see below see below see below see below see below   7307 11 Tube or pipe fittings of non-malleable cast iron 4,960 N/A 4,960 5,456 5,952 6,448   7307 19 10 Tube or pipe fittings of cast iron (excl. of non-malleable) 4,960 N/A 4,960 5,456 5,952 6,448   7307 19 90 Cast tube or pipe fittings of steel 5,180 N/A 5,180 5,698 6,216 6,734 (C) 7307 21 00 Flanges of stainless steel (excl. cast products) 5,150 N/A 5,150 5,665 6,180 6,695   7307 22 Threaded elbows, bends and sleeves of stainless steel (excl. cast products) 5,150 N/A 5,150 5,665 6,180 6,695   7307 23 Butt welding tube or pipe fittings of stainless steel (excl. cast products) 5,150 N/A 5,150 5,665 6,180 6,695   7307 29 Tube or pipe fittings of stainless steel (excl. cast products, flanges, threaded elbows, bends and sleeves and butt weldings fittings) 5,150 N/A 5,150 5,665 6,180 6,695   7307 91 00 Flanges of iron or steel (excl. cast or stainless products) 5,180 N/A 5,180 5,698 6,216 6,734 (C) 7307 92 Threaded elbows, bends and sleeves, of stainless steel (excl. cast or stainless products) 5,180 N/A 5,180 5,698 6,216 6,734 (C) 7307 93 Butt welding fittings of iron or steel (excl. cast iron or stainless steel products, and flanges) 5,180 N/A 5,180 5,698 6,216 6,734 (C) 7307 99 Tube or pipe fittings, of iron or steel (excl. cast iron or stainless steel products; flanges; threaded elbows, bends and sleeves; butt welding fittings) 5,180 N/A 5,180 5,698 6,216 6,734 (C) 7308 Structures and parts of structures "e.g., bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns", of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel (excl. prefabricated buildings of heading 9406) 5,360 N/A 5,360 5,896 6,432 6,968 (C) 7309 Reservoirs, tanks, vats and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of > 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated (excl. containers specifically constructed or equipped for one or more types of transport) 5,360 N/A 5,360 5,896 6,432 6,968 (C) 7310 Tanks, casks, drums, cans, boxes and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of <= 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated, n.e.s. 5,360 N/A 5,360 5,896 6,432 6,968 (C) 7311 Containers of iron or steel, for compressed or liquefied gas (excl. containers specifically constructed or equipped for one or more types of transport) see below see below see below see below see below see below   7311 00 Containers of iron or steel, for compressed or liquefied gas (excl. containers specifically constructed or equipped for one or more types of transport) 5,180 N/A 5,180 5,698 6,216 6,734 (C) 7318 Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers, incl. spring washers, and similar articles, of iron or steel (excl. lag screws, stoppers, plugs and the like, threaded) see below see below see below see below see below see below   7318 11 00 Coach screws of iron or steel 5,180 N/A 5,180 5,698 6,216 6,734 (C) 7318 12 10 Wood screws of stainless steel (excl. coach screws) 4,610 N/A 4,610 5,071 5,532 5,993 (C) 7318 12 90 Wood screws of iron or steel other than stainless (excl. coach screws) 5,180 N/A 5,180 5,698 6,216 6,734 (C) 7318 13 00 Screw hooks and screw rings, of iron or steel 5,180 N/A 5,180 5,698 6,216 6,734 (C) 7318 14 10 Self-tapping screws, of stainless steel (excl. wood screws) 4,610 N/A 4,610 5,071 5,532 5,993 (C) 7318 14 91 Spaced-thread screws of iron or steel other than stainless 5,180 N/A 5,180 5,698 6,216 6,734 (C) 7318 14 99 Self-tapping screws of iron or steel other than stainless (excl. spaced-thread screws and wood screws) 5,180 N/A 5,180 5,698 6,216 6,734 (C) 7318 15 Threaded screws and bolts, of iron or steel, whether or not with their nuts and washers (excl. coach screws and other wood screws, screw hooks and screw rings, self-tapping screws, lag screws, stoppers, plugs and the like, threaded) 5,180 N/A 5,180 5,698 6,216 6,734 (C) 7318 16 Nuts of iron or steel 5,180 N/A 5,180 5,698 6,216 6,734 (C) 7318 19 00 Threaded articles, of iron or steel, n.e.s. 5,180 N/A 5,180 5,698 6,216 6,734 (C) 7318 21 00 Spring washers and other lock washers, of iron or steel 5,180 N/A 5,180 5,698 6,216 6,734 (C) 7318 22 00 Washers of iron or steel (excl. spring washers and other lock washers) 5,180 N/A 5,180 5,698 6,216 6,734 (C) 7318 23 00 Rivets of iron or steel (excl. tubular and bifurcated rivets for particular uses) 5,180 N/A 5,180 5,698 6,216 6,734 (C) 7318 24 00 Cotters and cotter pins, of iron or steel 5,180 N/A 5,180 5,698 6,216 6,734 (C) 7318 29 00 Non-threaded articles, of iron or steel 5,180 N/A 5,180 5,698 6,216 6,734 (C) 7326 Articles of iron or steel, n.e.s. (excl. cast articles) see below see below see below see below see below see below   7326 11 00 Grinding balls and similar articles for mills, of iron or steel, forged or stamped, but not further worked 5,180 N/A 5,180 5,698 6,216 6,734 (C) 7326 19 Articles of iron or steel, forged or stamped, but not further worked, n.e.s. (excl. grinding balls and similar articles for mills) 5,180 N/A 5,180 5,698 6,216 6,734 (C) 7326 20 00 Articles of iron or steel wire, n.e.s. 5,180 N/A 5,180 5,698 6,216 6,734 (C) 7326 90 30 Ladders and steps, of iron or steel 5,180 N/A 5,180 5,698 6,216 6,734 (C) 7326 90 40 Pallets and similar platforms for handling goods, of iron or steel 5,180 N/A 5,180 5,698 6,216 6,734 (C) 7326 90 50 Reels for cables, piping and the like, of iron or steel 5,180 N/A 5,180 5,698 6,216 6,734 (C) 7326 90 60 Ventilators, non-mechanical, guttering, hooks and like articles used in the building industry, n.e.s., of iron or steel 5,180 N/A 5,180 5,698 6,216 6,734 (C) 7326 90 92 Articles of iron or steel, open-die forged, n.e.s. 5,180 N/A 5,180 5,698 6,216 6,734 (C) 7326 90 94 Articles of iron or steel, closed-die forged, n.e.s. 5,180 N/A 5,180 5,698 6,216 6,734 (C) 7326 90 96 Sintered articles of iron or steel, n.e.s. 5,180 N/A 5,180 5,698 6,216 6,734 (C) 7326 90 98 Articles of iron or steel, n.e.s. 5,360 N/A 5,360 5,896 6,432 6,968 (C) Kenya Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 1,700 0,040 1,740 1,757 1,757 1,757   2814 10 00 Anhydrous ammonia – – – – – –   2814 20 00 Ammonia in aqueous solution 0,600 0,040 0,650 0,657 0,657 0,657   2834 21 00 Nitrate of potassium 1,500 0,060 1,560 1,576 1,576 1,576   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,460 0,040 0,490 0,495 0,495 0,495   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,760 0,040 0,800 0,808 0,808 0,808   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,380 0,100 1,490 1,505 1,505 1,505   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,350 0,100 1,460 1,475 1,475 1,475   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,600 0,070 0,660 0,667 0,667 0,667   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,060 0,080 1,140 1,151 1,151 1,151   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,140 0,060 1,200 1,212 1,212 1,212   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,760 0,090 1,850 1,869 1,869 1,869   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,520 0,080 1,610 1,626 1,626 1,626   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,520 0,080 1,610 1,626 1,626 1,626   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,650 0,070 2,720 2,747 2,747 2,747   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,480 0,080 1,560 1,576 1,576 1,576   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,220 0,080 1,300 1,313 1,313 1,313   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,340 0,090 1,440 1,454 1,454 1,454   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,630 0,070 0,700 0,707 0,707 0,707   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,770 0,080 0,840 0,848 0,848 0,848   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,520 0,060 0,580 0,586 0,586 0,586   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,470 0,050 0,530 0,535 0,535 0,535   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,300 0,040 0,340 0,343 0,343 0,343   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,050 0,090 1,140 1,151 1,151 1,151   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,550 0,090 0,640 0,646 0,646 0,646   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,010 0,060 1,070 1,081 1,081 1,081   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,520 0,040 0,560 0,566 0,566 0,566   Aluminium         10 % mark-up 20 % mark-up 30 % mark-up   7601 Unwrought aluminium 0,360 N/A 0,360 0,396 0,432 0,468 (L) 7603 Aluminium powders and flakes 0,800 N/A 0,800 0,880 0,960 1,040 (L) 7604 10 10 Bars and rods 1,020 N/A 1,020 1,122 1,224 1,326 (L) 7604 10 90 Profiles 1,040 N/A 1,040 1,144 1,248 1,352 (L) 7604 21 00 Hollow profiles 1,040 N/A 1,040 1,144 1,248 1,352 (L) 7604 29 10 Bars and rods 1,020 N/A 1,020 1,122 1,224 1,326 (L) 7604 29 90 Profiles 1,040 N/A 1,040 1,144 1,248 1,352 (L) 7605 Aluminium wire 1,020 N/A 1,020 1,122 1,224 1,326 (L) 7606 Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm 1,480 N/A 1,480 1,628 1,776 1,924 (L) 7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm 1,480 N/A 1,480 1,628 1,776 1,924 (L) 7608 Aluminium tubes and pipes 1,040 N/A 1,040 1,144 1,248 1,352 (L) 7609 00 00 Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) 1,040 N/A 1,040 1,144 1,248 1,352 (L) 7610 10 00 Doors, windows and their frames and thresholds for doors 1,040 N/A 1,040 1,144 1,248 1,352 (L) 7610 90 Other 1,040 N/A 1,040 1,144 1,248 1,352 (L) 7610 90 10 Bridges and bridge-sections, towers and lattice masts 1,040 N/A 1,040 1,144 1,248 1,352 (L) 7610 90 90 Other 1,040 N/A 1,040 1,144 1,248 1,352 (L) 7611 00 00 Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 1,480 N/A 1,480 1,628 1,776 1,924 (L) 7612 Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 1,480 N/A 1,480 1,628 1,776 1,924 (L) 7613 00 00 Aluminium containers for compressed or liquefied gas 1,480 N/A 1,480 1,628 1,776 1,924 (L) 7614 Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated 1,020 N/A 1,020 1,122 1,224 1,326 (L) 7616 10 00 Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles 1,480 N/A 1,480 1,628 1,776 1,924 (L) 7616 91 00 Cloth, grill, netting and fencing, of aluminium wire 1,480 N/A 1,480 1,628 1,776 1,924 (L) 7616 99 10 Cast 0,800 N/A 0,800 0,880 0,960 1,040 (L) 7616 99 90 Other 1,480 N/A 1,480 1,628 1,776 1,924 (L) Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066   Iron and steel         10 % mark-up 20 % mark-up 30 % mark-up   7202 11 Ferro-manganese, containing by weight > 2% of carbon 1,690 N/A 1,690 1,859 2,028 2,197   7202 19 Ferro-manganese, containing by weight <= 2% carbon _ _ _ _ _ _   7202 41 Ferro-chromium, containing by weight > 4% of carbon 2,350 N/A 2,350 2,585 2,820 3,055   7202 49 Ferro-chromium, containing by weight <= 4% of carbon _ _ _ _ _ _   7202 60 00 Ferro-nickel 3,480 N/A 3,480 3,828 4,176 4,524   Kuwait Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – – – –   2523 10 00 White clinker – – – – – –   2523 10 00 Grey clinker 0,830 0,040 0,870 0,957 1,044 1,131 (A) 2523 21 00 White Portland cement – – – – – –   2523 29 00 Grey Portland cement 0,950 0,080 1,030 1,133 1,236 1,339   2523 90 00 White hydraulic cements – – – – – –   2523 90 00 Grey hydraulic cements 0,910 0,080 0,990 1,089 1,188 1,287 (A) 2523 30 00 Aluminous cement – – – – – –   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 2,450 0,070 2,510 2,535 2,535 2,535   2814 10 00 Anhydrous ammonia 1,960 0,140 2,100 2,121 2,121 2,121   2814 20 00 Ammonia in aqueous solution 0,590 0,040 0,630 0,636 0,636 0,636   2834 21 00 Nitrate of potassium 1,980 0,080 2,070 2,091 2,091 2,091   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,450 0,040 0,490 0,495 0,495 0,495   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,740 0,040 0,780 0,788 0,788 0,788   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,350 0,110 1,460 1,475 1,475 1,475   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,320 0,110 1,430 1,444 1,444 1,444   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,580 0,080 0,670 0,677 0,677 0,677   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,280 0,100 1,380 1,394 1,394 1,394   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,500 0,080 1,590 1,606 1,606 1,606   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,310 0,130 2,440 2,464 2,464 2,464   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,990 0,120 2,100 2,121 2,121 2,121   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,990 0,120 2,100 2,121 2,121 2,121   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 3,820 0,100 3,920 3,959 3,959 3,959   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,940 0,110 2,050 2,071 2,071 2,071   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,460 0,090 1,560 1,576 1,576 1,576   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,510 0,110 1,620 1,636 1,636 1,636   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,740 0,090 0,830 0,838 0,838 0,838   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,980 0,110 1,090 1,101 1,101 1,101   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,660 0,080 0,750 0,758 0,758 0,758   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,460 0,060 0,520 0,525 0,525 0,525   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,300 0,050 0,350 0,354 0,354 0,354   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,340 0,140 1,480 1,495 1,495 1,495   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,540 0,110 0,650 0,657 0,657 0,657   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,310 0,090 1,390 1,404 1,404 1,404   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,670 0,060 0,730 0,737 0,737 0,737   Aluminium         10 % mark-up 20 % mark-up 30 % mark-up   7601 Unwrought aluminium 0,360 N/A 0,360 0,396 0,432 0,468   7603 Aluminium powders and flakes 0,630 N/A 0,630 0,693 0,756 0,819   7604 10 10 Bars and rods 0,860 N/A 0,860 0,946 1,032 1,118   7604 10 90 Profiles 0,870 N/A 0,870 0,957 1,044 1,131   7604 21 00 Hollow profiles 0,870 N/A 0,870 0,957 1,044 1,131   7604 29 10 Bars and rods 0,860 N/A 0,860 0,946 1,032 1,118   7604 29 90 Profiles 0,870 N/A 0,870 0,957 1,044 1,131   7605 Aluminium wire 0,860 N/A 0,860 0,946 1,032 1,118   7606 Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm 1,320 N/A 1,320 1,452 1,584 1,716   7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm 1,320 N/A 1,320 1,452 1,584 1,716   7608 Aluminium tubes and pipes 0,870 N/A 0,870 0,957 1,044 1,131   7609 00 00 Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) 0,870 N/A 0,870 0,957 1,044 1,131   7610 10 00 Doors, windows and their frames and thresholds for doors 0,870 N/A 0,870 0,957 1,044 1,131   7610 90 Other 0,870 N/A 0,870 0,957 1,044 1,131   7610 90 10 Bridges and bridge-sections, towers and lattice masts 0,870 N/A 0,870 0,957 1,044 1,131   7610 90 90 Other 0,870 N/A 0,870 0,957 1,044 1,131   7611 00 00 Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 1,320 N/A 1,320 1,452 1,584 1,716   7612 Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 1,320 N/A 1,320 1,452 1,584 1,716   7613 00 00 Aluminium containers for compressed or liquefied gas 1,320 N/A 1,320 1,452 1,584 1,716   7614 Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated 0,860 N/A 0,860 0,946 1,032 1,118   7616 10 00 Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles 1,320 N/A 1,320 1,452 1,584 1,716   7616 91 00 Cloth, grill, netting and fencing, of aluminium wire 1,320 N/A 1,320 1,452 1,584 1,716   7616 99 10 Cast 0,630 N/A 0,630 0,693 0,756 0,819   7616 99 90 Other 1,320 N/A 1,320 1,452 1,584 1,716   Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 13,450 N/A 13,450 14,795 16,140 17,485   Kyrgyzstan Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – – – –   2523 10 00 White clinker – – – – – –   2523 10 00 Grey clinker 1,360 0 1,360 1,496 1,632 1,768 (A) 2523 21 00 White Portland cement – – – – – –   2523 29 00 Grey Portland cement 1,360 0,010 1,360 1,496 1,632 1,768   2523 90 00 White hydraulic cements – – – – – –   2523 90 00 Grey hydraulic cements 1,290 0,010 1,300 1,430 1,560 1,690 (A) 2523 30 00 Aluminous cement – – – – – –   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 2,770 0,040 2,810 2,838 2,838 2,838   2814 10 00 Anhydrous ammonia – – – – – –   2814 20 00 Ammonia in aqueous solution 0,650 0,040 0,690 0,697 0,697 0,697   2834 21 00 Nitrate of potassium 2,230 0,060 2,290 2,313 2,313 2,313   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,490 0,030 0,520 0,525 0,525 0,525   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,810 0,030 0,840 0,848 0,848 0,848   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,470 0,100 1,570 1,586 1,586 1,586   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,440 0,090 1,530 1,545 1,545 1,545   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,640 0,060 0,700 0,707 0,707 0,707   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,430 0,070 1,500 1,515 1,515 1,515   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,690 0,060 1,750 1,768 1,768 1,768   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,600 0,090 2,690 2,717 2,717 2,717   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,230 0,080 2,310 2,333 2,333 2,333   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,230 0,080 2,310 2,333 2,333 2,333   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 4,330 0,060 4,390 4,434 4,434 4,434   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,180 0,080 2,260 2,283 2,283 2,283   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,630 0,070 1,700 1,717 1,717 1,717   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,660 0,080 1,750 1,768 1,768 1,768   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,820 0,060 0,890 0,899 0,899 0,899   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,090 0,070 1,160 1,172 1,172 1,172   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,740 0,060 0,790 0,798 0,798 0,798   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,510 0,050 0,560 0,566 0,566 0,566   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,320 0,040 0,360 0,364 0,364 0,364   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,500 0,090 1,590 1,606 1,606 1,606   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,590 0,090 0,680 0,687 0,687 0,687   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,470 0,060 1,520 1,535 1,535 1,535   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,750 0,040 0,790 0,798 0,798 0,798   Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066   Laos Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066   Lebanon Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – – – –   2523 10 00 White clinker 1,290 0,070 1,360 1,496 1,632 1,768 (B) 2523 10 00 Grey clinker 0,830 0,050 0,880 0,968 1,056 1,144 (A) 2523 21 00 White Portland cement 1,270 0,160 1,430 1,573 1,716 1,859   2523 29 00 Grey Portland cement 0,830 0,100 0,930 1,023 1,116 1,209   2523 90 00 White hydraulic cements 1,310 0,210 1,520 1,672 1,824 1,976 (B) 2523 90 00 Grey hydraulic cements 0,790 0,100 0,890 0,979 1,068 1,157 (A) 2523 30 00 Aluminous cement – – – – – –   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 2,580 0,060 2,640 2,666 2,666 2,666   2814 10 00 Anhydrous ammonia – – – – – –   2814 20 00 Ammonia in aqueous solution 0,640 0,060 0,700 0,707 0,707 0,707   2834 21 00 Nitrate of potassium 2,100 0,090 2,190 2,212 2,212 2,212   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,480 0,050 0,530 0,535 0,535 0,535   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,800 0,050 0,850 0,859 0,859 0,859   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,450 0,140 1,600 1,616 1,616 1,616   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,420 0,140 1,560 1,576 1,576 1,576   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,630 0,110 0,740 0,747 0,747 0,747   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,360 0,120 1,480 1,495 1,495 1,495   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,590 0,090 1,690 1,707 1,707 1,707   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,450 0,140 2,590 2,616 2,616 2,616   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,100 0,130 2,230 2,252 2,252 2,252   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,100 0,130 2,230 2,252 2,252 2,252   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 4,030 0,090 4,120 4,161 4,161 4,161   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,060 0,120 2,180 2,202 2,202 2,202   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,560 0,110 1,670 1,687 1,687 1,687   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,610 0,130 1,740 1,757 1,757 1,757   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,790 0,110 0,900 0,909 0,909 0,909   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,030 0,130 1,160 1,172 1,172 1,172   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,700 0,100 0,800 0,808 0,808 0,808   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,500 0,080 0,580 0,586 0,586 0,586   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,320 0,060 0,380 0,384 0,384 0,384   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,420 0,160 1,580 1,596 1,596 1,596   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,580 0,130 0,710 0,717 0,717 0,717   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,390 0,100 1,480 1,495 1,495 1,495   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,710 0,070 0,780 0,788 0,788 0,788   Libya Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – – – –   2523 10 00 White clinker – – – – – –   2523 10 00 Grey clinker 0,830 0,040 0,870 0,957 1,044 1,131 (A) 2523 21 00 White Portland cement – – – – – –   2523 29 00 Grey Portland cement 0,830 0,090 0,910 1,001 1,092 1,183   2523 90 00 White hydraulic cements – – – – – –   2523 90 00 Grey hydraulic cements 0,790 0,090 0,880 0,968 1,056 1,144 (A) 2523 30 00 Aluminous cement – – – – – –   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 1,680 0,050 1,730 1,747 1,747 1,747   2814 10 00 Anhydrous ammonia 2,010 0,160 2,170 2,192 2,192 2,192   2814 20 00 Ammonia in aqueous solution 0,600 0,050 0,650 0,657 0,657 0,657   2834 21 00 Nitrate of potassium 1,490 0,080 1,560 1,576 1,576 1,576   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,460 0,040 0,500 0,505 0,505 0,505   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,760 0,040 0,800 0,808 0,808 0,808   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,380 0,120 1,500 1,515 1,515 1,515   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,350 0,120 1,470 1,485 1,485 1,485   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,600 0,090 0,690 0,697 0,697 0,697   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,060 0,100 1,160 1,172 1,172 1,172   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,130 0,080 1,210 1,222 1,222 1,222   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,740 0,120 1,860 1,879 1,879 1,879   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,510 0,110 1,620 1,636 1,636 1,636   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,510 0,110 1,620 1,636 1,636 1,636   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,620 0,080 2,700 2,727 2,727 2,727   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,460 0,110 1,570 1,586 1,586 1,586   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,210 0,100 1,310 1,323 1,323 1,323   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,340 0,120 1,450 1,465 1,465 1,465   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,630 0,100 0,720 0,727 0,727 0,727   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,760 0,120 0,880 0,889 0,889 0,889   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,520 0,090 0,610 0,616 0,616 0,616   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,470 0,070 0,540 0,545 0,545 0,545   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,300 0,060 0,360 0,364 0,364 0,364   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,040 0,140 1,180 1,192 1,192 1,192   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,550 0,110 0,660 0,667 0,667 0,667   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1 0,090 1,090 1,101 1,101 1,101   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,520 0,060 0,580 0,586 0,586 0,586   Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066   Madagascar Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – – – –   2523 10 00 White clinker – – – – – –   2523 10 00 Grey clinker 1,240 0,050 1,290 1,419 1,548 1,677 (A) 2523 21 00 White Portland cement – – – – – –   2523 29 00 Grey Portland cement 1,240 0,080 1,330 1,463 1,596 1,729   2523 90 00 White hydraulic cements – – – – – –   2523 90 00 Grey hydraulic cements 1,180 0,080 1,270 1,397 1,524 1,651 (A) 2523 30 00 Aluminous cement – – – – – –   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 1,800 0,060 1,860 1,879 1,879 1,879   2814 10 00 Anhydrous ammonia – – – – – –   2814 20 00 Ammonia in aqueous solution 0,710 0,050 0,760 0,768 0,768 0,768   2834 21 00 Nitrate of potassium 1,600 0,060 1,670 1,687 1,687 1,687   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,450 0,030 0,480 0,485 0,485 0,485   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,740 0,030 0,770 0,778 0,778 0,778   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,350 0,090 1,440 1,454 1,454 1,454   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,320 0,090 1,410 1,424 1,424 1,424   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,610 0,040 0,650 0,657 0,657 0,657   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,110 0,060 1,160 1,172 1,172 1,172   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,200 0,050 1,250 1,263 1,263 1,263   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,840 0,080 1,920 1,939 1,939 1,939   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,540 0,060 1,600 1,616 1,616 1,616   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,540 0,060 1,600 1,616 1,616 1,616   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,810 0,090 2,900 2,929 2,929 2,929   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,540 0,060 1,600 1,616 1,616 1,616   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,260 0,060 1,330 1,343 1,343 1,343   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,350 0,080 1,420 1,434 1,434 1,434   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,640 0,030 0,680 0,687 0,687 0,687   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,760 0,030 0,800 0,808 0,808 0,808   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,510 0,020 0,530 0,535 0,535 0,535   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,520 0,040 0,560 0,566 0,566 0,566   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,320 0,020 0,340 0,343 0,343 0,343   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,050 0,040 1,090 1,101 1,101 1,101   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,540 0,040 0,580 0,586 0,586 0,586   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,050 0,040 1,090 1,101 1,101 1,101   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,520 0,020 0,550 0,556 0,556 0,556   Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066   Malaysia Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – – – –   2523 10 00 White clinker 1,290 0,060 1,340 1,474 1,608 1,742 (B) 2523 10 00 Grey clinker 0,870 0,040 0,910 1,001 1,092 1,183 (A) 2523 21 00 White Portland cement 1,260 0,140 1,400 1,540 1,680 1,820   2523 29 00 Grey Portland cement 0,870 0,070 0,950 1,045 1,140 1,235   2523 90 00 White hydraulic cements 1,290 0,180 1,470 1,617 1,764 1,911 (B) 2523 90 00 Grey hydraulic cements 0,830 0,080 0,910 1,001 1,092 1,183 (A) 2523 30 00 Aluminous cement – – – – – –   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 2,150 0,060 2,210 2,232 2,232 2,232   2814 10 00 Anhydrous ammonia 2,050 0,170 2,220 2,242 2,242 2,242   2814 20 00 Ammonia in aqueous solution 0,620 0,050 0,660 0,667 0,667 0,667   2834 21 00 Nitrate of potassium 1,810 0,080 1,890 1,909 1,909 1,909   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,470 0,040 0,510 0,515 0,515 0,515   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,770 0,040 0,820 0,828 0,828 0,828   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,410 0,130 1,540 1,555 1,555 1,555   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,380 0,130 1,500 1,515 1,515 1,515   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,610 0,100 0,700 0,707 0,707 0,707   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,210 0,110 1,330 1,343 1,343 1,343   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,370 0,090 1,460 1,475 1,475 1,475   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,110 0,130 2,240 2,262 2,262 2,262   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,820 0,120 1,940 1,959 1,959 1,959   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,820 0,120 1,940 1,959 1,959 1,959   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 3,360 0,090 3,450 3,485 3,485 3,485   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,770 0,120 1,890 1,909 1,909 1,909   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,390 0,100 1,490 1,505 1,505 1,505   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,470 0,120 1,590 1,606 1,606 1,606   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,710 0,100 0,810 0,818 0,818 0,818   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,900 0,120 1,020 1,030 1,030 1,030   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,610 0,090 0,710 0,717 0,717 0,717   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,480 0,070 0,560 0,566 0,566 0,566   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,310 0,060 0,370 0,374 0,374 0,374   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,240 0,150 1,390 1,404 1,404 1,404   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,560 0,120 0,680 0,687 0,687 0,687   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,200 0,090 1,290 1,303 1,303 1,303   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,620 0,060 0,680 0,687 0,687 0,687   Aluminium         10 % mark-up 20 % mark-up 30 % mark-up   7601 Unwrought aluminium 1,700 N/A 1,700 1,870 2,040 2,210 (K) 7603 Aluminium powders and flakes 2,409 N/A 2,409 2,650 2,891 3,131 (K) 7604 10 10 Bars and rods 2,694 N/A 2,694 2,963 3,232 3,502 (K) 7604 10 90 Profiles 2,720 N/A 2,720 2,992 3,264 3,535 (K) 7604 21 00 Hollow profiles 2,720 N/A 2,720 2,992 3,264 3,535 (K) 7604 29 10 Bars and rods 2,694 N/A 2,694 2,963 3,232 3,502 (K) 7604 29 90 Profiles 2,720 N/A 2,720 2,992 3,264 3,535 (K) 7605 Aluminium wire 2,694 N/A 2,694 2,963 3,232 3,502 (K) 7606 Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm 3,289 N/A 3,289 3,618 3,947 4,276 (K) 7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm 3,289 N/A 3,289 3,618 3,947 4,276 (K) 7608 Aluminium tubes and pipes 2,720 N/A 2,720 2,992 3,264 3,535 (K) 7609 00 00 Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) 2,720 N/A 2,720 2,992 3,264 3,535 (K) 7610 10 00 Doors, windows and their frames and thresholds for doors 2,720 N/A 2,720 2,992 3,264 3,535 (K) 7610 90 Other 2,720 N/A 2,720 2,992 3,264 3,535 (K) 7610 90 10 Bridges and bridge-sections, towers and lattice masts 2,720 N/A 2,720 2,992 3,264 3,535 (K) 7610 90 90 Other 2,720 N/A 2,720 2,992 3,264 3,535 (K) 7611 00 00 Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 3,289 N/A 3,289 3,618 3,947 4,276 (K) 7612 Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 3,289 N/A 3,289 3,618 3,947 4,276 (K) 7613 00 00 Aluminium containers for compressed or liquefied gas 3,289 N/A 3,289 3,618 3,947 4,276 (K) 7614 Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated 2,694 N/A 2,694 2,963 3,232 3,502 (K) 7616 10 00 Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles 3,289 N/A 3,289 3,618 3,947 4,276 (K) 7616 91 00 Cloth, grill, netting and fencing, of aluminium wire 3,289 N/A 3,289 3,618 3,947 4,276 (K) 7616 99 10 Cast 2,409 N/A 2,409 2,650 2,891 3,131 (K) 7616 99 90 Other 3,289 N/A 3,289 3,618 3,947 4,276 (K) Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066   Iron and steel         10 % mark-up 20 % mark-up 30 % mark-up   7202 11 Ferro-manganese, containing by weight > 2% of carbon 1,690 N/A 1,690 1,859 2,028 2,197   7202 19 Ferro-manganese, containing by weight <= 2% carbon _ _ _ _ _ _   7202 41 Ferro-chromium, containing by weight > 4% of carbon 2,350 N/A 2,350 2,585 2,820 3,055   7202 49 Ferro-chromium, containing by weight <= 4% of carbon _ _ _ _ _ _   7202 60 00 Ferro-nickel 3,480 N/A 3,480 3,828 4,176 4,524   Mali Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – – – –   2523 10 00 White clinker – – – – – –   2523 10 00 Grey clinker 0,850 0,050 0,900 0,990 1,080 1,170 (A) 2523 21 00 White Portland cement – – – – – –   2523 29 00 Grey Portland cement 0,910 0,080 0,980 1,078 1,176 1,274   2523 90 00 White hydraulic cements – – – – – –   2523 90 00 Grey hydraulic cements 0,860 0,080 0,940 1,034 1,128 1,222 (A) 2523 30 00 Aluminous cement – – – – – –   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 1,740 0,050 1,790 1,808 1,808 1,808   2814 10 00 Anhydrous ammonia – – – – – –   2814 20 00 Ammonia in aqueous solution 0,660 0,050 0,710 0,717 0,717 0,717   2834 21 00 Nitrate of potassium 1,530 0,060 1,590 1,606 1,606 1,606   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,500 0,040 0,540 0,545 0,545 0,545   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,820 0,040 0,860 0,869 0,869 0,869   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,490 0,120 1,610 1,626 1,626 1,626   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,460 0,120 1,580 1,596 1,596 1,596   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,570 0,040 0,610 0,616 0,616 0,616   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,050 0,050 1,100 1,111 1,111 1,111   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,140 0,040 1,190 1,202 1,202 1,202   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,760 0,070 1,830 1,848 1,848 1,848   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,470 0,060 1,530 1,545 1,545 1,545   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,470 0,060 1,530 1,545 1,545 1,545   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,720 0,080 2,790 2,818 2,818 2,818   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,470 0,060 1,530 1,545 1,545 1,545   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,270 0,070 1,350 1,364 1,364 1,364   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,390 0,090 1,480 1,495 1,495 1,495   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,610 0,030 0,640 0,646 0,646 0,646   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,730 0,030 0,760 0,768 0,768 0,768   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,480 0,020 0,500 0,505 0,505 0,505   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,480 0,030 0,520 0,525 0,525 0,525   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,290 0,020 0,320 0,323 0,323 0,323   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1 0,040 1,040 1,050 1,050 1,050   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,500 0,040 0,540 0,545 0,545 0,545   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1 0,040 1,040 1,050 1,050 1,050   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,500 0,020 0,520 0,525 0,525 0,525   Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 0 N/A 0 0 0 0   Mauritius Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 1,690 0,050 1,740 1,757 1,757 1,757   2814 10 00 Anhydrous ammonia – – – – – –   2814 20 00 Ammonia in aqueous solution 0,640 0,050 0,690 0,697 0,697 0,697   2834 21 00 Nitrate of potassium 1,520 0,080 1,590 1,606 1,606 1,606   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,480 0,040 0,520 0,525 0,525 0,525   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,790 0,040 0,830 0,838 0,838 0,838   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,440 0,120 1,560 1,576 1,576 1,576   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,410 0,120 1,520 1,535 1,535 1,535   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,630 0,090 0,720 0,727 0,727 0,727   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,090 0,100 1,190 1,202 1,202 1,202   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,160 0,080 1,230 1,242 1,242 1,242   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,780 0,120 1,900 1,919 1,919 1,919   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,530 0,110 1,640 1,656 1,656 1,656   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,530 0,110 1,640 1,656 1,656 1,656   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,640 0,080 2,720 2,747 2,747 2,747   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,490 0,100 1,600 1,616 1,616 1,616   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,250 0,100 1,340 1,353 1,353 1,353   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,380 0,110 1,490 1,505 1,505 1,505   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,650 0,090 0,740 0,747 0,747 0,747   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,780 0,110 0,890 0,899 0,899 0,899   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,530 0,080 0,610 0,616 0,616 0,616   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,500 0,070 0,570 0,576 0,576 0,576   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,320 0,050 0,380 0,384 0,384 0,384   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,060 0,140 1,190 1,202 1,202 1,202   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,580 0,110 0,690 0,697 0,697 0,697   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,020 0,080 1,110 1,121 1,121 1,121   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,530 0,060 0,590 0,596 0,596 0,596   Mauritania Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – – – –   2523 10 00 White clinker – – – – – –   2523 10 00 Grey clinker – – – – – –   2523 21 00 White Portland cement – – – – – –   2523 29 00 Grey Portland cement 1,100 0,090 1,190 1,309 1,428 1,547   2523 90 00 White hydraulic cements – – – – – –   2523 90 00 Grey hydraulic cements 1,050 0,090 1,140 1,254 1,368 1,482 (A) 2523 30 00 Aluminous cement – – – – – –   Mexico Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 1,880 0,040 1,920 1,939 1,939 1,939   2814 10 00 Anhydrous ammonia 2,260 0,130 2,400 2,424 2,424 2,424   2814 20 00 Ammonia in aqueous solution 0,680 0,040 0,720 0,727 0,727 0,727   2834 21 00 Nitrate of potassium 1,660 0,060 1,730 1,747 1,747 1,747   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,510 0,030 0,540 0,545 0,545 0,545   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,840 0,030 0,870 0,879 0,879 0,879   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,530 0,100 1,630 1,646 1,646 1,646   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,500 0,100 1,590 1,606 1,606 1,606   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,660 0,070 0,730 0,737 0,737 0,737   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,180 0,080 1,260 1,273 1,273 1,273   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,270 0,060 1,330 1,343 1,343 1,343   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,950 0,100 2,040 2,060 2,060 2,060   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,680 0,090 1,770 1,788 1,788 1,788   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,680 0,090 1,770 1,788 1,788 1,788   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,930 0,060 3 3,030 3,030 3,030   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,630 0,080 1,720 1,737 1,737 1,737   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,350 0,080 1,430 1,444 1,444 1,444   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,490 0,090 1,580 1,596 1,596 1,596   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,700 0,070 0,770 0,778 0,778 0,778   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,850 0,090 0,930 0,939 0,939 0,939   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,580 0,070 0,640 0,646 0,646 0,646   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,530 0,050 0,580 0,586 0,586 0,586   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,340 0,040 0,380 0,384 0,384 0,384   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,150 0,110 1,260 1,273 1,273 1,273   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,610 0,100 0,710 0,717 0,717 0,717   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,120 0,070 1,180 1,192 1,192 1,192   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,580 0,050 0,620 0,626 0,626 0,626   Aluminium         10 % mark-up 20 % mark-up 30 % mark-up   7601 Unwrought aluminium 0,360 N/A 0,360 0,396 0,432 0,468 (L) 7603 Aluminium powders and flakes 1,180 N/A 1,180 1,298 1,416 1,534 (L) 7604 10 10 Bars and rods 1,410 N/A 1,410 1,551 1,692 1,833 (L) 7604 10 90 Profiles 1,420 N/A 1,420 1,562 1,704 1,846 (L) 7604 21 00 Hollow profiles 1,420 N/A 1,420 1,562 1,704 1,846 (L) 7604 29 10 Bars and rods 1,410 N/A 1,410 1,551 1,692 1,833 (L) 7604 29 90 Profiles 1,420 N/A 1,420 1,562 1,704 1,846 (L) 7605 Aluminium wire 1,410 N/A 1,410 1,551 1,692 1,833 (L) 7606 Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm 1,860 N/A 1,860 2,046 2,232 2,418 (L) 7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm 1,860 N/A 1,860 2,046 2,232 2,418 (L) 7608 Aluminium tubes and pipes 1,420 N/A 1,420 1,562 1,704 1,846 (L) 7609 00 00 Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) 1,420 N/A 1,420 1,562 1,704 1,846 (L) 7610 10 00 Doors, windows and their frames and thresholds for doors 1,420 N/A 1,420 1,562 1,704 1,846 (L) 7610 90 Other 1,420 N/A 1,420 1,562 1,704 1,846 (L) 7610 90 10 Bridges and bridge-sections, towers and lattice masts 1,420 N/A 1,420 1,562 1,704 1,846 (L) 7610 90 90 Other 1,420 N/A 1,420 1,562 1,704 1,846 (L) 7611 00 00 Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 1,860 N/A 1,860 2,046 2,232 2,418 (L) 7612 Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 1,860 N/A 1,860 2,046 2,232 2,418 (L) 7613 00 00 Aluminium containers for compressed or liquefied gas 1,860 N/A 1,860 2,046 2,232 2,418 (L) 7614 Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated 1,410 N/A 1,410 1,551 1,692 1,833 (L) 7616 10 00 Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles 1,860 N/A 1,860 2,046 2,232 2,418 (L) 7616 91 00 Cloth, grill, netting and fencing, of aluminium wire 1,860 N/A 1,860 2,046 2,232 2,418 (L) 7616 99 10 Cast 1,180 N/A 1,180 1,298 1,416 1,534 (L) 7616 99 90 Other 1,860 N/A 1,860 2,046 2,232 2,418 (L) Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066   Iron and steel         10 % mark-up 20 % mark-up 30 % mark-up   2601 12 00 Agglomerated iron ores and concentrates (excl. roasted iron pyrites) 0,120 0,010 0,130 0,143 0,156 0,169   7201 Pig iron and spiegeleisen, in pigs, blocks or other primary forms 2,580 N/A 2,580 2,838 3,096 3,354   7202 11 Ferro-manganese, containing by weight > 2% of carbon 1,690 N/A 1,690 1,859 2,028 2,197   7202 19 Ferro-manganese, containing by weight <= 2% carbon – N/A – – – –   7202 41 Ferro-chromium, containing by weight > 4% of carbon – N/A – – – –   7202 49 Ferro-chromium, containing by weight <= 4% of carbon – N/A – – – –   7202 60 00 Ferro-nickel – N/A – – – –   7203 Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99,94%, in lumps, pellets or similar forms 0,580 N/A 0,580 0,638 0,696 0,754   7205 Granules and powders of pig iron, spiegeleisen, iron or steel (excl. granules and powders of ferro-alloys, turnings and filings of iron or steel, radioactive iron powders "isotopes" and certain low-calibre, substandard balls for ballbearings) 2,570 N/A 2,570 2,827 3,084 3,341 (C) 7206 Iron and non-alloy steel in ingots or other primary forms (excl. remelting scrap ingots, products obtained by continuous casting and iron of heading 7203) see below see below see below see below see below see below   7206 10 00 Ingots, of iron and non-alloy steel (excl. remelted scrap ingots, continuous cast products, iron of heading 7203) 2,670 N/A 2,670 2,937 3,204 3,471 (C) 7206 90 00 Iron and non-alloy steel, in puddled bars or other primary forms (excl. ingots, remelted scrap ingots, continuous cast products, iron of heading 7203) 2,670 N/A 2,670 2,937 3,204 3,471 (C) 7207 Semi-finished products of iron or non-alloy steel see below see below see below see below see below see below   7207 11 11 Semi-finished products, of non-alloy free-cutting steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting 2,740 N/A 2,740 3,014 3,288 3,562 (C) 7207 11 14 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness of <= 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel) 2,740 N/A 2,740 3,014 3,288 3,562 (C) 7207 11 16 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness of > 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel) 2,740 N/A 2,740 3,014 3,288 3,562 (C) 7207 11 90 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular cross-section, the width < twice the thickness, forged 2,670 N/A 2,670 2,937 3,204 3,471 (C) 7207 12 10 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtained by continuous casting 2,740 N/A 2,740 3,014 3,288 3,562 (C) 7207 12 90 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular "other than square" cross-section, the width >= twice the thickness, forged 2,670 N/A 2,670 2,937 3,204 3,471 (C) 7207 19 12 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting 2,740 N/A 2,740 3,014 3,288 3,562 (C) 7207 19 19 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, forged 2,670 N/A 2,670 2,937 3,204 3,471 (C) 7207 19 80 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon (excl. semi-products, of square, rectangular, circular or polygonal cross-section) 2,740 N/A 2,740 3,014 3,288 3,562 (C) 7207 20 11 Semi-finished products, of non-alloy free-cutting steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting 2,740 N/A 2,740 3,014 3,288 3,562 (C) 7207 20 15 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% but < 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel) 2,740 N/A 2,740 3,014 3,288 3,562 (C) 7207 20 17 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel) 2,740 N/A 2,740 3,014 3,288 3,562 (C) 7207 20 19 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, forged 2,670 N/A 2,670 2,937 3,204 3,471 (C) 7207 20 32 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtained by continuous casting 2,740 N/A 2,740 3,014 3,288 3,562 (C) 7207 20 39 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of rectangular "other than square" cross-section and the width >= twice the thickness, forged 2,670 N/A 2,670 2,937 3,204 3,471 (C) 7207 20 52 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting 2,740 N/A 2,740 3,014 3,288 3,562 (C) 7207 20 59 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of circular or polygonal cross-section, forged 2,670 N/A 2,670 2,937 3,204 3,471 (C) 7207 20 80 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon (excl. those of square, rectangular, circular or polygonal cross-section) 2,740 N/A 2,740 3,014 3,288 3,562 (C) 7208 Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled, not clad, plated or coated 2,750 N/A 2,750 3,025 3,300 3,575 (C) 7209 Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, cold-rolled "cold-reduced", not clad, plated or coated 2,810 N/A 2,810 3,091 3,372 3,653 (C) 7210 Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated 2,810 N/A 2,810 3,091 3,372 3,653 (C) 7211 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", not clad, plated or coated see below see below see below see below see below see below   7211 13 00 Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as "wide flats" 2,750 N/A 2,750 3,025 3,300 3,575 (C) 7211 14 00 Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, not further worked than hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm (excl. "wide flats") 2,750 N/A 2,750 3,025 3,300 3,575 (C) 7211 19 00 Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, simply hot-rolled, not clad, plated or coated, of a thickness < 4,75 mm (excl. "wide flats") 2,750 N/A 2,750 3,025 3,300 3,575 (C) 7211 23 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight < 0,25% of carbon 2,810 N/A 2,810 3,091 3,372 3,653 (C) 7211 29 00 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight >= 0,25% of carbon 2,810 N/A 2,810 3,091 3,372 3,653 (C) 7211 90 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked, but not clad, plated or coated 2,810 N/A 2,810 3,091 3,372 3,653 (C) 7212 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated 2,810 N/A 2,810 3,091 3,372 3,653 (C) 7213 Bars and rods of iron or non-alloy steel, hot-rolled, in irregularly wound coils 2,740 N/A 2,740 3,014 3,288 3,562 (C) 7214 Bars and rods, of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but incl. those twisted after rolling (excl. in irregularly wound coils) see below see below see below see below see below see below   7214 10 00 Bars and rods, of iron or non-alloy steel, not further worked than forged (excl. in irregularly wound coils) 2,670 N/A 2,670 2,937 3,204 3,471 (C) 7214 20 00 Bars and rods, of iron or non-alloy steel, with indentations, ribs, groves or other deformations produced during the rolling process 2,740 N/A 2,740 3,014 3,288 3,562 (C) 7214 30 00 Bars and rods, of non-alloy free-cutting steel, not further worked than hot-rolled, hot-drawn or hot-extruded (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling) 2,740 N/A 2,740 3,014 3,288 3,562 (C) 7214 91 Bars and rods, of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, of rectangular "other than square" cross-section (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process, bars and rods twisted after rolling and free-cutting steel) 2,740 N/A 2,740 3,014 3,288 3,562 (C) 7214 99 Bars and rods, of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded (excl. of rectangular [other than square] cross-section and those containing indentations, ribs, grooves or other deformations produced during the rolling process, and of non-alloy free-cutting steel) 2,740 N/A 2,740 3,014 3,288 3,562 (C) 7215 Bars and rods, of iron or non-alloy steel, cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked, n.e.s. 2,740 N/A 2,740 3,014 3,288 3,562 (C) 7216 Angles, shapes and sections of iron or non-alloy steel, n.e.s. 2,740 N/A 2,740 3,014 3,288 3,562 (C) 7217 Wire of iron or non-alloy steel, in coils (excl. bars and rods) see below see below see below see below see below see below   7217 10 Wire of iron or non-alloy steel, in coils, not plated or coated, whether or not polished (excl. bars and rods) 2,740 N/A 2,740 3,014 3,288 3,562 (C) 7217 20 Wire of iron or non-alloy steel, in coils, plated or coated with zinc (excl. bars and rods) 2,740 N/A 2,740 3,014 3,288 3,562 (C) 7217 30 Wire of iron or non-alloy steel, in coils, plated or coated with base metals (excl. plated or coated with zinc, and bars and rods) 2,740 N/A 2,740 3,014 3,288 3,562 (C) 7217 90 Wire of iron or non-alloy steel, in coils, plated or coated (excl. plated or coated with base metals, and bars and rods) 2,740 N/A 2,740 3,014 3,288 3,562 (C) 7218 Stainless steel in ingots or other primary forms (excl. remelting scrap ingots and products obtained by continuous casting); semi-finished products of stainless steel see below see below see below see below see below see below   7218 10 00 Steel, stainless, in ingots and other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) 3,110 N/A 3,110 3,421 3,732 4,043   7218 91 Semi-finished products of stainless steel, of rectangular "other than square" cross-section 3,240 N/A 3,240 3,564 3,888 4,212   7218 99 11 Semi-finished products of stainless steel, of square cross-section, rolled or obtained by continuous casting 3,240 N/A 3,240 3,564 3,888 4,212   7218 99 19 Semi-finished products of stainless steel, of square cross-section, forged 3,110 N/A 3,110 3,421 3,732 4,043   7218 99 20 Semi-finished products of stainless steel, of circular cross-section or of cross-section other than square or rectangular, rolled or obtained by continuous casting 3,240 N/A 3,240 3,564 3,888 4,212   7218 99 80 Semi-finished products of stainless steel, forged (excl. products of square or rectangular cross-section) 3,110 N/A 3,110 3,421 3,732 4,043   7219 Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7219 11 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of > 10 mm 3,240 N/A 3,240 3,564 3,888 4,212   7219 12 Flat-rolled products of stainless steel, of a width of>= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 4,7 mm and <= 10 mm 3,240 N/A 3,240 3,564 3,888 4,212   7219 13 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 3 mm and < 4,75 mm 3,240 N/A 3,240 3,564 3,888 4,212   7219 14 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of < 3 mm 3,240 N/A 3,240 3,564 3,888 4,212   7219 21 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of > 10 mm 3,240 N/A 3,240 3,564 3,888 4,212   7219 22 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 4,75 mm and <= 10 mm 3,240 N/A 3,240 3,564 3,888 4,212   7219 23 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 3 mm and < 4,75 mm 3,240 N/A 3,240 3,564 3,888 4,212   7219 24 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of < 3 mm 3,240 N/A 3,240 3,564 3,888 4,212   7219 31 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 4,75 mm 3,300 N/A 3,300 3,630 3,960 4,290   7219 32 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 3 mm but < 4,75 mm 3,300 N/A 3,300 3,630 3,960 4,290   7219 33 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of > 1 mm but < 3 mm 3,300 N/A 3,300 3,630 3,960 4,290   7219 34 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 0,5 mm but <= 1 mm 3,300 N/A 3,300 3,630 3,960 4,290   7219 35 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of < 0,5 mm 3,300 N/A 3,300 3,630 3,960 4,290   7219 90 Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked 3,300 N/A 3,300 3,630 3,960 4,290   7220 Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7220 11 00 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of >= 4,75 mm 3,240 N/A 3,240 3,564 3,888 4,212   7220 12 00 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of < 4,75 mm 3,240 N/A 3,240 3,564 3,888 4,212   7220 20 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" 3,300 N/A 3,300 3,630 3,960 4,290   7220 90 Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked 3,300 N/A 3,300 3,630 3,960 4,290   7221 Bars and rods of stainless steel, hot-rolled, in irregularly wound coils 3,310 N/A 3,310 3,641 3,972 4,303   7222 Other bars and rods of stainless steel; angles, shapes and sections of stainless steel, n.e.s. see below see below see below see below see below see below   7222 11 Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only hot-extruded, of circular cross-section 3,310 N/A 3,310 3,641 3,972 4,303   7222 19 Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only extruded (excl. of circular cross-section) 3,310 N/A 3,310 3,641 3,972 4,303   7222 20 Other bars and rods of stainless steel, not further worked than cold-formed or cold-finished 3,310 N/A 3,310 3,641 3,972 4,303   7222 30 Other bars and rods of stainless steel, cold-formed or cold-finished and further worked, or not further worked than forged, or forged, or hot-formed by other means and further worked, n.e.s. 3,110 N/A 3,110 3,421 3,732 4,043   7222 40 Angles, shapes and sections of stainless steel, n.e.s. 3,310 N/A 3,310 3,641 3,972 4,303   7223 Wire of stainless steel, in coils (excl. bars and rods) see below see below see below see below see below see below   7223 00 Wire of stainless steel, in coils (excl. bars and rods) 3,310 N/A 3,310 3,641 3,972 4,303   7224 Steel, alloy, other than stainless, in ingots or other primary forms, semi-finished products of alloy steel other than stainless (excl. waste and scrap in ingot form, and products obtained by continuous casting) see below see below see below see below see below see below   7224 10 Steel, alloy, other than stainless, in ingots or other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) 3,520 N/A 3,520 3,872 4,224 4,576 (F) 7224 90 02 Semi-finished products of tool steel 3,650 N/A 3,650 4,015 4,380 4,745 (F) 7224 90 03 Semi-finished products of high-speed steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting the width measuring < twice the thickness 3,650 N/A 3,650 4,015 4,380 4,745 (F) 7224 90 05 Semi-finished products of steel containing by weight <= 0,7% of carbon, 0,5% to 1,2% of manganese, 0,6% to 2,3% of silicon, or of steel containing by weight >= 0,0008% of boron with any other element < the minimum content referred to in Note 1 f to chapter 72, of square or rectangular cross-section, hot rolled or obtained by continuous casting, the width measuring < twice the thickness 3,650 N/A 3,650 4,015 4,380 4,745 (F) 7224 90 07 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring < twice the thickness (excl. of tool steel, high-speed steel and articles of subheading 7224.90.05) 3,650 N/A 3,650 4,015 4,380 4,745 (F) 7224 90 14 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring >= twice the thickness (excl. of tool steel) 3,650 N/A 3,650 4,015 4,380 4,745 (F) 7224 90 18 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, forged (excl. of tool steel) 3,520 N/A 3,520 3,872 4,224 4,576 (F) 7224 90 31 Semi-finished products of steel containing by weight 0,9% to 1,15% carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting 3,650 N/A 3,650 4,015 4,380 4,745 (F) 7224 90 38 Semi-finished products of alloy steel, other than stainless steel, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting (excl. of tool steel and products containing by weight 0,9% to 1,15% of carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum) 3,650 N/A 3,650 4,015 4,380 4,745 (F) 7224 90 90 Semi-finished products of alloy steel, other than stainless steel, forged (excl. of tool steel and products of square or rectangular, circular or polygamol cross-section) 3,520 N/A 3,520 3,872 4,224 4,576 (F) 7225 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7225 11 00 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, grain-oriented 4,790 N/A 4,790 5,269 5,748 6,227 (C) 7225 19 10 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, hot-rolled 3,650 N/A 3,650 4,015 4,380 4,745 (C) 7225 19 90 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, cold-rolled "cold-reduced", non-grain-oriented 3,710 N/A 3,710 4,081 4,452 4,823 (F) 7225 30 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, in coils (excl. products of silicon-electrical steel) 3,650 N/A 3,650 4,015 4,380 4,745 (F) 7225 40 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, not in coils (excl. products of silicon-electrical steel) 3,650 N/A 3,650 4,015 4,380 4,745 (F) 7225 50 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of silicon-electrical steel) 3,710 N/A 3,710 4,081 4,452 4,823 (F) 7225 91 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and electrolytically plated or coated with zinc (excl. products of silicon-electrical steel) 3,710 N/A 3,710 4,081 4,452 4,823 (F) 7225 92 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and plated or coated with zinc (excl. electrolytically plated or coated and products of silicon-electrical steel) 3,710 N/A 3,710 4,081 4,452 4,823 (F) 7225 99 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. plated or coated with zinc and products of silicon-electrical steel) 3,710 N/A 3,710 4,081 4,452 4,823 (F) 7226 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7226 11 00 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", grain-oriented 4,790 N/A 4,790 5,269 5,748 6,227 (C) 7226 19 10 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, not further worked than hot-rolled 3,650 N/A 3,650 4,015 4,380 4,745 (C) 7226 19 80 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, cold-rolled "cold-reduced", whether or not further worked, or hot-rolled and further worked, non-grain-oriented 3,710 N/A 3,710 4,081 4,452 4,823 (F) 7226 20 00 Flat-rolled products of high-speed steel, of a width of <= 600 mm, hot-rolled or cold-rolled "cold-reduced" 3,650 N/A 3,650 4,015 4,380 4,745 (F) 7226 91 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than hot-rolled (excl. products of high-speed steel or silicon-electrical steel) 3,650 N/A 3,650 4,015 4,380 4,745 (F) 7226 92 00 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of high-speed steel or silicon-electrical steel) 3,710 N/A 3,710 4,081 4,452 4,823 (F) 7226 99 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. products of high-speed steel or silicon-electrical steel) 3,710 N/A 3,710 4,081 4,452 4,823 (F) 7227 Bars and rods of alloy steel other than stainless, hot-rolled, in irregularly wound coils 3,710 N/A 3,710 4,081 4,452 4,823 (C)/(F) 7228 Other bars and rods of alloy steel other than stainless, angles, shapes and sections of alloy steel other than stainless, n.e.s.; hollow drill bars and rods, of alloy or non-alloy steel see below see below see below see below see below see below   7228 10 20 Bars and rods of high-speed steel, not further worked than hot-rolled, hot-drawn or extruded, and hot-rolled, hot-drawn or extruded, not further worked than clad (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,710 N/A 3,710 4,081 4,452 4,823 (F) 7228 10 50 Bars and rods of high-speed steel, forged (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,520 N/A 3,520 3,872 4,224 4,576 (F) 7228 10 90 Bars and rods of high-speed steel, not further worked than cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked (excl. forged products, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,710 N/A 3,710 4,081 4,452 4,823 (F) 7228 20 Bars and rods of silico-manganese steel (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,710 N/A 3,710 4,081 4,452 4,823 (F) 7228 30 Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,710 N/A 3,710 4,081 4,452 4,823 (C)/(F) 7228 40 Bars and rods of alloy steel other than stainless, not further worked than forged (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,520 N/A 3,520 3,872 4,224 4,576 (F) 7228 50 Bars and rods of alloy steel other than stainless, not further worked than cold-formed or cold-finished (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,710 N/A 3,710 4,081 4,452 4,823 (C)/(F) 7228 60 Bars and rods of alloy steel other than stainless, cold-formed or cold-finished and further worked or hot-formed and further worked, n.e.s. (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,710 N/A 3,710 4,081 4,452 4,823 (F) 7228 70 Angles, shapes and sections of alloy steel other than stainless, n.e.s. 3,710 N/A 3,710 4,081 4,452 4,823 (F) 7228 80 00 Hollow drill bars and rods, of alloy or non-alloy steel 3,710 N/A 3,710 4,081 4,452 4,823 (F) 7229 Wire of alloy steel other than stainless, in coils (excl. bars and rods) 3,710 N/A 3,710 4,081 4,452 4,823 (C)/(F) 7301 Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel 2,810 N/A 2,810 3,091 3,372 3,653 (C) 7302 Railway or tramway track construction material of iron or steel, the following : rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers "cross-ties", fish-plates, chairs, chair wedges, sole plates "base plates", rail clips, bedplates, ties and other material specialised for jointing or fixing rails 2,960 N/A 2,960 3,256 3,552 3,848 (C) 7303 Tubes, pipes and hollow profiles, of cast iron see below see below see below see below see below see below   7303 00 Tubes, pipes and hollow profiles, of cast iron 2,800 N/A 2,800 3,080 3,360 3,640   7304 Tubes, pipes and hollow profiles, seamless, of iron or steel (excl. products of cast iron) see below see below see below see below see below see below   7304 11 00 Line pipe of a kind used for oil or gas pipelines, seamless, of stainless steel 3,210 N/A 3,210 3,531 3,852 4,173   7304 19 Line pipe of a kind used for oil or gas pipelines, seamless, of iron or steel (excl. products of stainless steel or of cast iron) 2,770 N/A 2,770 3,047 3,324 3,601 (C) 7304 22 00 Drill pipe, seamless, of stainless steel, of a kind used in drilling for oil or gas 3,210 N/A 3,210 3,531 3,852 4,173   7304 23 00 Drill pipe, seamless, of a kind used in drilling for oil or gas, of iron or steel (excl. products of stainless steel or of cast iron) 2,770 N/A 2,770 3,047 3,324 3,601 (C) 7304 24 00 Casing and tubing, seamless, of a kind used for drilling for oil or gas, of stainless steel 3,210 N/A 3,210 3,531 3,852 4,173   7304 29 Casing and tubing, seamless, of iron or steel, of a kind used in drilling for oil or gas (excl. products of cast iron) 2,770 N/A 2,770 3,047 3,324 3,601 (C) 7304 31 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" (excl. cast iron products and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used for drilling for oil or gas) 2,770 N/A 2,770 3,047 3,324 3,601 (C) 7304 39 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, not cold-drawn or cold-rolled "cold-reduced" (excl. cast iron products, line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas) 2,770 N/A 2,770 3,047 3,324 3,601 (C) 7304 41 00 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas) 3,210 N/A 3,210 3,531 3,852 4,173   7304 49 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines or of a kind used for drilling for oil or gas) 3,210 N/A 3,210 3,531 3,852 4,173   7304 51 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil) 2,660 N/A 2,660 2,926 3,192 3,458 (F) 7304 59 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil) 2,660 N/A 2,660 2,926 3,192 3,458 (C)/(F) 7304 90 00 Tubes, pipes and hollow profiles, seamless, of non-circular cross-section, of iron or steel (excl. products of cast iron) 2,770 N/A 2,770 3,047 3,324 3,601 (C) 7305 Tubes and pipes, having circular cross-sections and an external diameter of > 406,4 mm, of flat-rolled products of iron or steel "e.g., welded, riveted or similarly closed" 2,810 N/A 2,810 3,091 3,372 3,653 (C) 7306 Tubes, pipes and hollow profiles "e.g., open seam or welded, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless tubes and pipes and tubes having internal and external circular cross-sections and an external diameter of > 406,4 mm) see below see below see below see below see below see below   7306 11 00 Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm 3,300 N/A 3,300 3,630 3,960 4,290   7306 19 00 Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron) 2,810 N/A 2,810 3,091 3,372 3,653 (C) 7306 21 00 Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm 3,300 N/A 3,300 3,630 3,960 4,290   7306 29 00 Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron) 2,810 N/A 2,810 3,091 3,372 3,653 (C) 7306 30 12 Precision tubes, welded, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" 2,810 N/A 2,810 3,091 3,372 3,653 (C) 7306 30 18 Precision tubes, welded, of circular cross-section, of iron or non-alloy steel (excl. cold-drawn or cold-rolled) 2,750 N/A 2,750 3,025 3,300 3,575   7306 30 41 Threaded or threadable tubes "gas pipe", welded, of circular cross-section, of iron or non-alloy steel, plated or coated with zinc 2,810 N/A 2,810 3,091 3,372 3,653 (C) 7306 30 49 Threaded or threadable tubes "gas pipe", welded, of circular cross-section, of iron or non-alloy steel (excl. products plated or coated with zinc) 2,810 N/A 2,810 3,091 3,372 3,653 (C) 7306 30 72 Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel, of an external diameter of <= 168,3 mm, plated or coated with zinc (excl. line pipe of a kind used for oil or gas pipelines or casing and tubingof a kind used in drilling for oil or gas) 2,810 N/A 2,810 3,091 3,372 3,653 (C) 7306 30 77 Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel of an external diameter of <= 168,3 mm (excl. plated or coated with zinc and line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used in drilling for oil or gas, precision tubes and threaded or threadable tubes "gas pipe") 2,810 N/A 2,810 3,091 3,372 3,653 (C) 7306 30 80 Tubes, pipes and hollow profiles, welded, having a circular cross-section, of iron or steel, of an external diameter of > 168,3 mm but <= 406,4 mm (excl. line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, or precision steel tubes, electrical conduit tubes or threaded or threadable tubes "gas pipe") 2,810 N/A 2,810 3,091 3,372 3,653 (C) 7306 40 20 Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. products having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) 3,300 N/A 3,300 3,630 3,960 4,290   7306 40 80 Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel (excl. products cold-drawn or cold-rolled "cold-reduced", tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) 3,240 N/A 3,240 3,564 3,888 4,212   7306 50 21 Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" 2,760 N/A 2,760 3,036 3,312 3,588 (F) 7306 50 29 Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless (excl. cold-drawn or cold-rolled) 2,700 N/A 2,700 2,970 3,240 3,510 (F) 7306 50 80 Tubes, pipes and hollow profiles, welded, of circular cross-section, of alloy steel other than stainless (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and precision steel tubes) 2,760 N/A 2,760 3,036 3,312 3,588 (F) 7306 61 10 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel 3,300 N/A 3,300 3,630 3,960 4,290   7306 61 92 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of <= 2 mm 2,810 N/A 2,810 3,091 3,372 3,653 (C) 7306 61 99 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of > 2 mm 2,810 N/A 2,810 3,091 3,372 3,653 (C) 7306 69 10 Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) 3,300 N/A 3,300 3,630 3,960 4,290   7306 69 90 Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of iron or steel other than stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) 2,810 N/A 2,810 3,091 3,372 3,653 (C) 7306 90 00 Tubes, pipes and hollow profiles "e.g., open seam, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless or welded tubes and pipes and tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm) 2,810 N/A 2,810 3,091 3,372 3,653 (C) 7307 Tube or pipe fittings "e.g. couplings, elbows, sleeves", of iron or steel see below see below see below see below see below see below   7307 11 Tube or pipe fittings of non-malleable cast iron 2,550 N/A 2,550 2,805 3,060 3,315   7307 19 10 Tube or pipe fittings of cast iron (excl. of non-malleable) 2,550 N/A 2,550 2,805 3,060 3,315   7307 19 90 Cast tube or pipe fittings of steel 2,670 N/A 2,670 2,937 3,204 3,471 (C) 7307 21 00 Flanges of stainless steel (excl. cast products) 2,930 N/A 2,930 3,223 3,516 3,809   7307 22 Threaded elbows, bends and sleeves of stainless steel (excl. cast products) 2,930 N/A 2,930 3,223 3,516 3,809   7307 23 Butt welding tube or pipe fittings of stainless steel (excl. cast products) 2,930 N/A 2,930 3,223 3,516 3,809   7307 29 Tube or pipe fittings of stainless steel (excl. cast products, flanges, threaded elbows, bends and sleeves and butt weldings fittings) 2,930 N/A 2,930 3,223 3,516 3,809   7307 91 00 Flanges of iron or steel (excl. cast or stainless products) 2,770 N/A 2,770 3,047 3,324 3,601 (C) 7307 92 Threaded elbows, bends and sleeves, of stainless steel (excl. cast or stainless products) 2,770 N/A 2,770 3,047 3,324 3,601 (C) 7307 93 Butt welding fittings of iron or steel (excl. cast iron or stainless steel products, and flanges) 2,770 N/A 2,770 3,047 3,324 3,601 (C) 7307 99 Tube or pipe fittings, of iron or steel (excl. cast iron or stainless steel products; flanges; threaded elbows, bends and sleeves; butt welding fittings) 2,770 N/A 2,770 3,047 3,324 3,601 (C) 7308 Structures and parts of structures "e.g., bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns", of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel (excl. prefabricated buildings of heading 9406) 2,990 N/A 2,990 3,289 3,588 3,887 (C) 7309 Reservoirs, tanks, vats and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of > 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated (excl. containers specifically constructed or equipped for one or more types of transport) 3,130 N/A 3,130 3,443 3,756 4,069 (C) 7310 Tanks, casks, drums, cans, boxes and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of <= 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated, n.e.s. 2,810 N/A 2,810 3,091 3,372 3,653 (C) 7311 Containers of iron or steel, for compressed or liquefied gas (excl. containers specifically constructed or equipped for one or more types of transport) see below see below see below see below see below see below   7311 00 Containers of iron or steel, for compressed or liquefied gas (excl. containers specifically constructed or equipped for one or more types of transport) 3,060 N/A 3,060 3,366 3,672 3,978 (C) 7318 Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers, incl. spring washers, and similar articles, of iron or steel (excl. lag screws, stoppers, plugs and the like, threaded) see below see below see below see below see below see below   7318 11 00 Coach screws of iron or steel 2,740 N/A 2,740 3,014 3,288 3,562 (C) 7318 12 10 Wood screws of stainless steel (excl. coach screws) 3,180 N/A 3,180 3,498 3,816 4,134 (C) 7318 12 90 Wood screws of iron or steel other than stainless (excl. coach screws) 2,740 N/A 2,740 3,014 3,288 3,562 (C) 7318 13 00 Screw hooks and screw rings, of iron or steel 2,740 N/A 2,740 3,014 3,288 3,562 (C) 7318 14 10 Self-tapping screws, of stainless steel (excl. wood screws) 3,180 N/A 3,180 3,498 3,816 4,134 (C) 7318 14 91 Spaced-thread screws of iron or steel other than stainless 2,740 N/A 2,740 3,014 3,288 3,562 (C) 7318 14 99 Self-tapping screws of iron or steel other than stainless (excl. spaced-thread screws and wood screws) 2,740 N/A 2,740 3,014 3,288 3,562 (C) 7318 15 Threaded screws and bolts, of iron or steel, whether or not with their nuts and washers (excl. coach screws and other wood screws, screw hooks and screw rings, self-tapping screws, lag screws, stoppers, plugs and the like, threaded) 2,900 N/A 2,900 3,190 3,480 3,770 (C) 7318 16 Nuts of iron or steel 3,060 N/A 3,060 3,366 3,672 3,978 (C) 7318 19 00 Threaded articles, of iron or steel, n.e.s. 2,740 N/A 2,740 3,014 3,288 3,562 (C) 7318 21 00 Spring washers and other lock washers, of iron or steel 2,740 N/A 2,740 3,014 3,288 3,562 (C) 7318 22 00 Washers of iron or steel (excl. spring washers and other lock washers) 2,740 N/A 2,740 3,014 3,288 3,562 (C) 7318 23 00 Rivets of iron or steel (excl. tubular and bifurcated rivets for particular uses) 2,740 N/A 2,740 3,014 3,288 3,562 (C) 7318 24 00 Cotters and cotter pins, of iron or steel 2,740 N/A 2,740 3,014 3,288 3,562 (C) 7318 29 00 Non-threaded articles, of iron or steel 2,740 N/A 2,740 3,014 3,288 3,562 (C) 7326 Articles of iron or steel, n.e.s. (excl. cast articles) see below see below see below see below see below see below   7326 11 00 Grinding balls and similar articles for mills, of iron or steel, forged or stamped, but not further worked 2,670 N/A 2,670 2,937 3,204 3,471 (C) 7326 19 Articles of iron or steel, forged or stamped, but not further worked, n.e.s. (excl. grinding balls and similar articles for mills) 2,670 N/A 2,670 2,937 3,204 3,471 (C) 7326 20 00 Articles of iron or steel wire, n.e.s. 2,740 N/A 2,740 3,014 3,288 3,562 (C) 7326 90 30 Ladders and steps, of iron or steel 2,740 N/A 2,740 3,014 3,288 3,562 (C) 7326 90 40 Pallets and similar platforms for handling goods, of iron or steel 2,740 N/A 2,740 3,014 3,288 3,562 (C) 7326 90 50 Reels for cables, piping and the like, of iron or steel 2,740 N/A 2,740 3,014 3,288 3,562 (C) 7326 90 60 Ventilators, non-mechanical, guttering, hooks and like articles used in the building industry, n.e.s., of iron or steel 2,740 N/A 2,740 3,014 3,288 3,562 (C) 7326 90 92 Articles of iron or steel, open-die forged, n.e.s. 2,670 N/A 2,670 2,937 3,204 3,471 (C) 7326 90 94 Articles of iron or steel, closed-die forged, n.e.s. 2,670 N/A 2,670 2,937 3,204 3,471 (C) 7326 90 96 Sintered articles of iron or steel, n.e.s. 2,670 N/A 2,670 2,937 3,204 3,471 (C) 7326 90 98 Articles of iron or steel, n.e.s. 2,810 N/A 2,810 3,091 3,372 3,653 (C) Moldova Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – – – –   2523 10 00 White clinker – – – – – –   2523 10 00 Grey clinker 1,340 0,040 1,380 1,518 1,656 1,794 (A) 2523 21 00 White Portland cement – – – – – –   2523 29 00 Grey Portland cement 1,340 0,070 1,410 1,551 1,692 1,833   2523 90 00 White hydraulic cements – – – – – –   2523 90 00 Grey hydraulic cements – – – – – –   2523 30 00 Aluminous cement – – – – – –   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 2,760 0,040 2,800 2,828 2,828 2,828   2814 10 00 Anhydrous ammonia – – – – – –   2814 20 00 Ammonia in aqueous solution 0,650 0,040 0,690 0,697 0,697 0,697   2834 21 00 Nitrate of potassium 2,230 0,060 2,290 2,313 2,313 2,313   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,490 0,030 0,520 0,525 0,525 0,525   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,810 0,030 0,840 0,848 0,848 0,848   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,470 0,100 1,570 1,586 1,586 1,586   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,440 0,100 1,540 1,555 1,555 1,555   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,640 0,080 0,710 0,717 0,717 0,717   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,420 0,080 1,510 1,525 1,525 1,525   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,680 0,060 1,750 1,768 1,768 1,768   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,590 0,100 2,690 2,717 2,717 2,717   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,220 0,090 2,310 2,333 2,333 2,333   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,220 0,090 2,310 2,333 2,333 2,333   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 4,310 0,070 4,380 4,424 4,424 4,424   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,170 0,090 2,260 2,283 2,283 2,283   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,620 0,080 1,700 1,717 1,717 1,717   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,660 0,090 1,760 1,778 1,778 1,778   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,820 0,080 0,900 0,909 0,909 0,909   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,090 0,090 1,180 1,192 1,192 1,192   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,740 0,070 0,810 0,818 0,818 0,818   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,510 0,060 0,560 0,566 0,566 0,566   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,320 0,040 0,370 0,374 0,374 0,374   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,500 0,110 1,610 1,626 1,626 1,626   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,590 0,100 0,680 0,687 0,687 0,687   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,460 0,070 1,530 1,545 1,545 1,545   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,750 0,050 0,800 0,808 0,808 0,808   Mongolia Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – – – –   2523 10 00 White clinker – – – – – –   2523 10 00 Grey clinker 1,360 0,070 1,430 1,573 1,716 1,859 (A) 2523 21 00 White Portland cement – – – – – –   2523 29 00 Grey Portland cement 1,360 0,130 1,490 1,639 1,788 1,937   2523 90 00 White hydraulic cements – – – – – –   2523 90 00 Grey hydraulic cements 1,290 0,130 1,420 1,562 1,704 1,846 (A) 2523 30 00 Aluminous cement – – – – – –   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 2,190 0,090 2,290 2,313 2,313 2,313   2814 10 00 Anhydrous ammonia – – – – – –   2814 20 00 Ammonia in aqueous solution 0,650 0,090 0,740 0,747 0,747 0,747   2834 21 00 Nitrate of potassium 1,820 0,110 1,930 1,949 1,949 1,949   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,410 0,050 0,460 0,465 0,465 0,465   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,670 0,050 0,730 0,737 0,737 0,737   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,230 0,160 1,390 1,404 1,404 1,404   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,200 0,160 1,360 1,374 1,374 1,374   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,560 0,070 0,630 0,636 0,636 0,636   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,180 0,100 1,270 1,283 1,283 1,283   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,360 0,080 1,440 1,454 1,454 1,454   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,090 0,130 2,220 2,242 2,242 2,242   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,750 0,110 1,860 1,879 1,879 1,879   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,750 0,110 1,860 1,879 1,879 1,879   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 3,420 0,150 3,570 3,606 3,606 3,606   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,750 0,110 1,860 1,879 1,879 1,879   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,340 0,110 1,450 1,465 1,465 1,465   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,360 0,130 1,490 1,505 1,505 1,505   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,670 0,060 0,730 0,737 0,737 0,737   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,850 0,060 0,910 0,919 0,919 0,919   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,570 0,040 0,600 0,606 0,606 0,606   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,470 0,060 0,540 0,545 0,545 0,545   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,290 0,040 0,330 0,333 0,333 0,333   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,180 0,080 1,250 1,263 1,263 1,263   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,490 0,070 0,560 0,566 0,566 0,566   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,180 0,080 1,250 1,263 1,263 1,263   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,590 0,040 0,630 0,636 0,636 0,636   Montenegro Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Aluminium         10 % mark-up 20 % mark-up 30 % mark-up   7601 Unwrought aluminium 1,700 N/A 1,700 1,870 2,040 2,210 (K) 7603 Aluminium powders and flakes 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7604 10 10 Bars and rods 2,280 N/A 2,280 2,508 2,736 2,964 (K) 7604 10 90 Profiles 2,290 N/A 2,290 2,519 2,748 2,977 (K) 7604 21 00 Hollow profiles 2,290 N/A 2,290 2,519 2,748 2,977 (K) 7604 29 10 Bars and rods 2,280 N/A 2,280 2,508 2,736 2,964 (K) 7604 29 90 Profiles 2,290 N/A 2,290 2,519 2,748 2,977 (K) 7605 Aluminium wire 2,280 N/A 2,280 2,508 2,736 2,964 (K) 7606 Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm 2,730 N/A 2,730 3,003 3,276 3,549 (K) 7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm 2,730 N/A 2,730 3,003 3,276 3,549 (K) 7608 Aluminium tubes and pipes 2,290 N/A 2,290 2,519 2,748 2,977 (K) 7609 00 00 Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) 2,290 N/A 2,290 2,519 2,748 2,977 (K) 7610 10 00 Doors, windows and their frames and thresholds for doors 2,290 N/A 2,290 2,519 2,748 2,977 (K) 7610 90 Other 2,290 N/A 2,290 2,519 2,748 2,977 (K) 7610 90 10 Bridges and bridge-sections, towers and lattice masts 2,290 N/A 2,290 2,519 2,748 2,977 (K) 7610 90 90 Other 2,290 N/A 2,290 2,519 2,748 2,977 (K) 7611 00 00 Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 2,730 N/A 2,730 3,003 3,276 3,549 (K) 7612 Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 2,730 N/A 2,730 3,003 3,276 3,549 (K) 7613 00 00 Aluminium containers for compressed or liquefied gas 2,730 N/A 2,730 3,003 3,276 3,549 (K) 7614 Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated 2,280 N/A 2,280 2,508 2,736 2,964 (K) 7616 10 00 Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles 2,730 N/A 2,730 3,003 3,276 3,549 (K) 7616 91 00 Cloth, grill, netting and fencing, of aluminium wire 2,730 N/A 2,730 3,003 3,276 3,549 (K) 7616 99 10 Cast 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7616 99 90 Other 2,730 N/A 2,730 3,003 3,276 3,549 (K) Iron and steel         10 % mark-up 20 % mark-up 30 % mark-up   7202 11 Ferro-manganese, containing by weight > 2% of carbon 1,690 N/A 1,690 1,859 2,028 2,197   7202 19 Ferro-manganese, containing by weight <= 2% carbon _ _ _ _ _ _   7202 41 Ferro-chromium, containing by weight > 4% of carbon 2,350 N/A 2,350 2,585 2,820 3,055   7202 49 Ferro-chromium, containing by weight <= 4% of carbon _ _ _ _ _ _   7202 60 00 Ferro-nickel 3,480 N/A 3,480 3,828 4,176 4,524   Morocco Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – – – –   2523 10 00 White clinker – – – – – –   2523 10 00 Grey clinker 0,850 0,060 0,900 0,990 1,080 1,170 (A) 2523 21 00 White Portland cement 1,210 0,150 1,360 1,496 1,632 1,768   2523 29 00 Grey Portland cement 0,860 0,100 0,950 1,045 1,140 1,235   2523 90 00 White hydraulic cements 1,250 0,200 1,450 1,595 1,740 1,885 (B) 2523 90 00 Grey hydraulic cements 0,820 0,100 0,910 1,001 1,092 1,183 (A) 2523 30 00 Aluminous cement – – – – – –   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 2,480 0,060 2,540 2,565 2,565 2,565   2814 10 00 Anhydrous ammonia 2,030 0,180 2,200 2,222 2,222 2,222   2814 20 00 Ammonia in aqueous solution 0,610 0,050 0,660 0,667 0,667 0,667   2834 21 00 Nitrate of potassium 2,020 0,090 2,100 2,121 2,121 2,121   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,450 0,050 0,500 0,505 0,505 0,505   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,750 0,050 0,790 0,798 0,798 0,798   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,360 0,140 1,500 1,515 1,515 1,515   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,330 0,140 1,460 1,475 1,475 1,475   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,590 0,110 0,700 0,707 0,707 0,707   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,300 0,120 1,420 1,434 1,434 1,434   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,530 0,090 1,620 1,636 1,636 1,636   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,350 0,140 2,490 2,515 2,515 2,515   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,010 0,130 2,140 2,161 2,161 2,161   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,010 0,130 2,140 2,161 2,161 2,161   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 3,880 0,090 3,970 4,010 4,010 4,010   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,970 0,120 2,090 2,111 2,111 2,111   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,480 0,110 1,590 1,606 1,606 1,606   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,520 0,130 1,650 1,667 1,667 1,667   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,750 0,110 0,860 0,869 0,869 0,869   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,990 0,130 1,120 1,131 1,131 1,131   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,670 0,100 0,770 0,778 0,778 0,778   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,480 0,080 0,550 0,556 0,556 0,556   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,300 0,060 0,370 0,374 0,374 0,374   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,360 0,160 1,520 1,535 1,535 1,535   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,550 0,120 0,670 0,677 0,677 0,677   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,330 0,100 1,420 1,434 1,434 1,434   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,680 0,070 0,750 0,758 0,758 0,758   Aluminium         10 % mark-up 20 % mark-up 30 % mark-up   7601 Unwrought aluminium 0,360 N/A 0,360 0,396 0,432 0,468 (L) 7603 Aluminium powders and flakes 0,510 N/A 0,510 0,561 0,612 0,663 (L) 7604 10 10 Bars and rods 0,730 N/A 0,730 0,803 0,876 0,949 (L) 7604 10 90 Profiles 0,750 N/A 0,750 0,825 0,900 0,975 (L) 7604 21 00 Hollow profiles 0,750 N/A 0,750 0,825 0,900 0,975 (L) 7604 29 10 Bars and rods 0,730 N/A 0,730 0,803 0,876 0,949 (L) 7604 29 90 Profiles 0,750 N/A 0,750 0,825 0,900 0,975 (L) 7605 Aluminium wire 0,730 N/A 0,730 0,803 0,876 0,949 (L) 7606 Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm 1,190 N/A 1,190 1,309 1,428 1,547 (L) 7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm 1,190 N/A 1,190 1,309 1,428 1,547 (L) 7608 Aluminium tubes and pipes 0,750 N/A 0,750 0,825 0,900 0,975 (L) 7609 00 00 Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) 0,750 N/A 0,750 0,825 0,900 0,975 (L) 7610 10 00 Doors, windows and their frames and thresholds for doors 0,750 N/A 0,750 0,825 0,900 0,975 (L) 7610 90 Other 0,750 N/A 0,750 0,825 0,900 0,975 (L) 7610 90 10 Bridges and bridge-sections, towers and lattice masts 0,750 N/A 0,750 0,825 0,900 0,975 (L) 7610 90 90 Other 0,750 N/A 0,750 0,825 0,900 0,975 (L) 7611 00 00 Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 1,190 N/A 1,190 1,309 1,428 1,547 (L) 7612 Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 1,190 N/A 1,190 1,309 1,428 1,547 (L) 7613 00 00 Aluminium containers for compressed or liquefied gas 1,190 N/A 1,190 1,309 1,428 1,547 (L) 7614 Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated 0,730 N/A 0,730 0,803 0,876 0,949 (L) 7616 10 00 Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles 1,190 N/A 1,190 1,309 1,428 1,547 (L) 7616 91 00 Cloth, grill, netting and fencing, of aluminium wire 1,190 N/A 1,190 1,309 1,428 1,547 (L) 7616 99 10 Cast 0,510 N/A 0,510 0,561 0,612 0,663 (L) 7616 99 90 Other 1,190 N/A 1,190 1,309 1,428 1,547 (L) Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066   Mozambique Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Aluminium         10 % mark-up 20 % mark-up 30 % mark-up   7601 Unwrought aluminium 3,198 N/A 3,198 3,518 3,838 4,157 (K) 7603 Aluminium powders and flakes 3,712 N/A 3,712 4,083 4,454 4,825 (K) 7604 10 10 Bars and rods 4,124 N/A 4,124 4,536 4,949 5,361 (K) 7604 10 90 Profiles 4,161 N/A 4,161 4,578 4,994 5,410 (K) 7604 21 00 Hollow profiles 4,161 N/A 4,161 4,578 4,994 5,410 (K) 7604 29 10 Bars and rods 4,124 N/A 4,124 4,536 4,949 5,361 (K) 7604 29 90 Profiles 4,161 N/A 4,161 4,578 4,994 5,410 (K) 7605 Aluminium wire 4,124 N/A 4,124 4,536 4,949 5,361 (K) 7606 Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm 4,986 N/A 4,986 5,485 5,984 6,482 (K) 7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm 4,986 N/A 4,986 5,485 5,984 6,482 (K) 7608 Aluminium tubes and pipes 4,161 N/A 4,161 4,578 4,994 5,410 (K) 7609 00 00 Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) 4,161 N/A 4,161 4,578 4,994 5,410 (K) 7610 10 00 Doors, windows and their frames and thresholds for doors 4,161 N/A 4,161 4,578 4,994 5,410 (K) 7610 90 Other 4,161 N/A 4,161 4,578 4,994 5,410 (K) 7610 90 10 Bridges and bridge-sections, towers and lattice masts 4,161 N/A 4,161 4,578 4,994 5,410 (K) 7610 90 90 Other 4,161 N/A 4,161 4,578 4,994 5,410 (K) 7611 00 00 Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 4,986 N/A 4,986 5,485 5,984 6,482 (K) 7612 Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 4,986 N/A 4,986 5,485 5,984 6,482 (K) 7613 00 00 Aluminium containers for compressed or liquefied gas 4,986 N/A 4,986 5,485 5,984 6,482 (K) 7614 Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated 4,124 N/A 4,124 4,536 4,949 5,361 (K) 7616 10 00 Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles 4,986 N/A 4,986 5,485 5,984 6,482 (K) 7616 91 00 Cloth, grill, netting and fencing, of aluminium wire 4,986 N/A 4,986 5,485 5,984 6,482 (K) 7616 99 10 Cast 3,712 N/A 3,712 4,083 4,454 4,825 (K) 7616 99 90 Other 4,986 N/A 4,986 5,485 5,984 6,482 (K) Myanmar/Burma Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – – – –   2523 10 00 White clinker – – – – – –   2523 10 00 Grey clinker 1,360 0,030 1,380 1,518 1,656 1,794 (A) 2523 21 00 White Portland cement – – – – – –   2523 29 00 Grey Portland cement 1,350 0,050 1,400 1,540 1,680 1,820   2523 90 00 White hydraulic cements – – – – – –   2523 90 00 Grey hydraulic cements 1,280 0,050 1,330 1,463 1,596 1,729 (A) 2523 30 00 Aluminous cement – – – – – –   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 2,140 0,030 2,170 2,192 2,192 2,192   2814 10 00 Anhydrous ammonia 2,100 0,110 2,200 2,222 2,222 2,222   2814 20 00 Ammonia in aqueous solution 0,630 0,030 0,660 0,667 0,667 0,667   2834 21 00 Nitrate of potassium 1,800 0,050 1,860 1,879 1,879 1,879   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,480 0,030 0,500 0,505 0,505 0,505   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,790 0,030 0,820 0,828 0,828 0,828   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,430 0,080 1,520 1,535 1,535 1,535   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,400 0,080 1,480 1,495 1,495 1,495   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,620 0,060 0,680 0,687 0,687 0,687   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,220 0,070 1,290 1,303 1,303 1,303   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,370 0,050 1,420 1,434 1,434 1,434   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,110 0,080 2,190 2,212 2,212 2,212   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,820 0,080 1,890 1,909 1,909 1,909   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,820 0,080 1,890 1,909 1,909 1,909   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 3,340 0,050 3,390 3,424 3,424 3,424   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,770 0,070 1,840 1,858 1,858 1,858   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,400 0,060 1,460 1,475 1,475 1,475   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,480 0,080 1,560 1,576 1,576 1,576   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,720 0,060 0,780 0,788 0,788 0,788   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,900 0,080 0,980 0,990 0,990 0,990   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,610 0,060 0,670 0,677 0,677 0,677   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,490 0,050 0,540 0,545 0,545 0,545   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,320 0,040 0,350 0,354 0,354 0,354   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,240 0,090 1,330 1,343 1,343 1,343   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,570 0,090 0,660 0,667 0,667 0,667   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,200 0,060 1,260 1,273 1,273 1,273   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,620 0,040 0,660 0,667 0,667 0,667   Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066   Iron and steel         10 % mark-up 20 % mark-up 30 % mark-up   2601 12 00 Agglomerated iron ores and concentrates (excl. roasted iron pyrites) – – – – – –   7201 Pig iron and spiegeleisen, in pigs, blocks or other primary forms – N/A – – – –   7202 11 Ferro-manganese, containing by weight > 2% of carbon – N/A – – – –   7202 19 Ferro-manganese, containing by weight <= 2% carbon – N/A – – – –   7202 41 Ferro-chromium, containing by weight > 4% of carbon – N/A – – – –   7202 49 Ferro-chromium, containing by weight <= 4% of carbon – N/A – – – –   7202 60 00 Ferro-nickel 3,480 N/A 3,480 3,828 4,176 4,524   7203 Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99,94%, in lumps, pellets or similar forms – N/A – – – –   7205 Granules and powders of pig iron, spiegeleisen, iron or steel (excl. granules and powders of ferro-alloys, turnings and filings of iron or steel, radioactive iron powders "isotopes" and certain low-calibre, substandard balls for ballbearings) 1,350 N/A 1,350 1,485 1,620 1,755 (E) 7206 Iron and non-alloy steel in ingots or other primary forms (excl. remelting scrap ingots, products obtained by continuous casting and iron of heading 7203) see below see below see below see below see below see below   7206 10 00 Ingots, of iron and non-alloy steel (excl. remelted scrap ingots, continuous cast products, iron of heading 7203) 0,470 N/A 0,470 0,517 0,564 0,611 (E) 7206 90 00 Iron and non-alloy steel, in puddled bars or other primary forms (excl. ingots, remelted scrap ingots, continuous cast products, iron of heading 7203) 0,470 N/A 0,470 0,517 0,564 0,611 (E) 7207 Semi-finished products of iron or non-alloy steel see below see below see below see below see below see below   7207 11 11 Semi-finished products, of non-alloy free-cutting steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting 0,470 N/A 0,470 0,517 0,564 0,611 (E) 7207 11 14 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness of <= 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel) 0,470 N/A 0,470 0,517 0,564 0,611 (E) 7207 11 16 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness of > 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel) 0,470 N/A 0,470 0,517 0,564 0,611 (E) 7207 11 90 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular cross-section, the width < twice the thickness, forged 0,470 N/A 0,470 0,517 0,564 0,611 (E) 7207 12 10 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtained by continuous casting 0,470 N/A 0,470 0,517 0,564 0,611 (E) 7207 12 90 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular "other than square" cross-section, the width >= twice the thickness, forged 0,470 N/A 0,470 0,517 0,564 0,611 (E) 7207 19 12 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting 0,470 N/A 0,470 0,517 0,564 0,611 (E) 7207 19 19 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, forged 0,470 N/A 0,470 0,517 0,564 0,611 (E) 7207 19 80 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon (excl. semi-products, of square, rectangular, circular or polygonal cross-section) 0,470 N/A 0,470 0,517 0,564 0,611 (E) 7207 20 11 Semi-finished products, of non-alloy free-cutting steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting 0,470 N/A 0,470 0,517 0,564 0,611 (E) 7207 20 15 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% but < 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel) 0,470 N/A 0,470 0,517 0,564 0,611 (E) 7207 20 17 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel) 0,470 N/A 0,470 0,517 0,564 0,611 (E) 7207 20 19 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, forged 0,470 N/A 0,470 0,517 0,564 0,611 (E) 7207 20 32 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtained by continuous casting 0,470 N/A 0,470 0,517 0,564 0,611 (E) 7207 20 39 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of rectangular "other than square" cross-section and the width >= twice the thickness, forged 0,470 N/A 0,470 0,517 0,564 0,611 (E) 7207 20 52 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting 0,470 N/A 0,470 0,517 0,564 0,611 (E) 7207 20 59 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of circular or polygonal cross-section, forged 0,470 N/A 0,470 0,517 0,564 0,611 (E) 7207 20 80 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon (excl. those of square, rectangular, circular or polygonal cross-section) 0,470 N/A 0,470 0,517 0,564 0,611 (E) 7208 Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled, not clad, plated or coated 0,470 N/A 0,470 0,517 0,564 0,611 (E) 7209 Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, cold-rolled "cold-reduced", not clad, plated or coated 0,470 N/A 0,470 0,517 0,564 0,611 (E) 7210 Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated 0,470 N/A 0,470 0,517 0,564 0,611 (E) 7211 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", not clad, plated or coated see below see below see below see below see below see below   7211 13 00 Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as "wide flats" 0,470 N/A 0,470 0,517 0,564 0,611 (E) 7211 14 00 Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, not further worked than hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm (excl. "wide flats") 0,470 N/A 0,470 0,517 0,564 0,611 (E) 7211 19 00 Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, simply hot-rolled, not clad, plated or coated, of a thickness < 4,75 mm (excl. "wide flats") 0,470 N/A 0,470 0,517 0,564 0,611 (E) 7211 23 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight < 0,25% of carbon 0,470 N/A 0,470 0,517 0,564 0,611 (E) 7211 29 00 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight >= 0,25% of carbon 0,470 N/A 0,470 0,517 0,564 0,611 (E) 7211 90 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked, but not clad, plated or coated 0,470 N/A 0,470 0,517 0,564 0,611 (E) 7212 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated 0,470 N/A 0,470 0,517 0,564 0,611 (E) 7213 Bars and rods of iron or non-alloy steel, hot-rolled, in irregularly wound coils 0,470 N/A 0,470 0,517 0,564 0,611 (E) 7214 Bars and rods, of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but incl. those twisted after rolling (excl. in irregularly wound coils) see below see below see below see below see below see below   7214 10 00 Bars and rods, of iron or non-alloy steel, not further worked than forged (excl. in irregularly wound coils) 0,470 N/A 0,470 0,517 0,564 0,611 (E) 7214 20 00 Bars and rods, of iron or non-alloy steel, with indentations, ribs, groves or other deformations produced during the rolling process 0,470 N/A 0,470 0,517 0,564 0,611 (E) 7214 30 00 Bars and rods, of non-alloy free-cutting steel, not further worked than hot-rolled, hot-drawn or hot-extruded (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling) 0,470 N/A 0,470 0,517 0,564 0,611 (E) 7214 91 Bars and rods, of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, of rectangular "other than square" cross-section (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process, bars and rods twisted after rolling and free-cutting steel) 0,470 N/A 0,470 0,517 0,564 0,611 (E) 7214 99 Bars and rods, of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded (excl. of rectangular [other than square] cross-section and those containing indentations, ribs, grooves or other deformations produced during the rolling process, and of non-alloy free-cutting steel) 0,470 N/A 0,470 0,517 0,564 0,611 (E) 7215 Bars and rods, of iron or non-alloy steel, cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked, n.e.s. 0,470 N/A 0,470 0,517 0,564 0,611 (E) 7216 Angles, shapes and sections of iron or non-alloy steel, n.e.s. 0,470 N/A 0,470 0,517 0,564 0,611 (E) 7217 Wire of iron or non-alloy steel, in coils (excl. bars and rods) see below see below see below see below see below see below   7217 10 Wire of iron or non-alloy steel, in coils, not plated or coated, whether or not polished (excl. bars and rods) 0,470 N/A 0,470 0,517 0,564 0,611 (E) 7217 20 Wire of iron or non-alloy steel, in coils, plated or coated with zinc (excl. bars and rods) 0,470 N/A 0,470 0,517 0,564 0,611 (E) 7217 30 Wire of iron or non-alloy steel, in coils, plated or coated with base metals (excl. plated or coated with zinc, and bars and rods) 0,470 N/A 0,470 0,517 0,564 0,611 (E) 7217 90 Wire of iron or non-alloy steel, in coils, plated or coated (excl. plated or coated with base metals, and bars and rods) 0,470 N/A 0,470 0,517 0,564 0,611 (E) 7218 Stainless steel in ingots or other primary forms (excl. remelting scrap ingots and products obtained by continuous casting); semi-finished products of stainless steel see below see below see below see below see below see below   7218 10 00 Steel, stainless, in ingots and other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) 3,130 N/A 3,130 3,443 3,756 4,069   7218 91 Semi-finished products of stainless steel, of rectangular "other than square" cross-section 3,130 N/A 3,130 3,443 3,756 4,069   7218 99 11 Semi-finished products of stainless steel, of square cross-section, rolled or obtained by continuous casting 3,130 N/A 3,130 3,443 3,756 4,069   7218 99 19 Semi-finished products of stainless steel, of square cross-section, forged 3,130 N/A 3,130 3,443 3,756 4,069   7218 99 20 Semi-finished products of stainless steel, of circular cross-section or of cross-section other than square or rectangular, rolled or obtained by continuous casting 3,130 N/A 3,130 3,443 3,756 4,069   7218 99 80 Semi-finished products of stainless steel, forged (excl. products of square or rectangular cross-section) 3,130 N/A 3,130 3,443 3,756 4,069   7219 Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7219 11 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of > 10 mm 3,130 N/A 3,130 3,443 3,756 4,069   7219 12 Flat-rolled products of stainless steel, of a width of>= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 4,7 mm and <= 10 mm 3,130 N/A 3,130 3,443 3,756 4,069   7219 13 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 3 mm and < 4,75 mm 3,130 N/A 3,130 3,443 3,756 4,069   7219 14 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of < 3 mm 3,130 N/A 3,130 3,443 3,756 4,069   7219 21 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of > 10 mm 3,130 N/A 3,130 3,443 3,756 4,069   7219 22 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 4,75 mm and <= 10 mm 3,130 N/A 3,130 3,443 3,756 4,069   7219 23 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 3 mm and < 4,75 mm 3,130 N/A 3,130 3,443 3,756 4,069   7219 24 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of < 3 mm 3,130 N/A 3,130 3,443 3,756 4,069   7219 31 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 4,75 mm 3,130 N/A 3,130 3,443 3,756 4,069   7219 32 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 3 mm but < 4,75 mm 3,130 N/A 3,130 3,443 3,756 4,069   7219 33 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of > 1 mm but < 3 mm 3,130 N/A 3,130 3,443 3,756 4,069   7219 34 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 0,5 mm but <= 1 mm 3,130 N/A 3,130 3,443 3,756 4,069   7219 35 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of < 0,5 mm 3,130 N/A 3,130 3,443 3,756 4,069   7219 90 Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked 3,130 N/A 3,130 3,443 3,756 4,069   7220 Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7220 11 00 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of >= 4,75 mm 3,130 N/A 3,130 3,443 3,756 4,069   7220 12 00 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of < 4,75 mm 3,130 N/A 3,130 3,443 3,756 4,069   7220 20 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" 3,130 N/A 3,130 3,443 3,756 4,069   7220 90 Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked 3,130 N/A 3,130 3,443 3,756 4,069   7221 Bars and rods of stainless steel, hot-rolled, in irregularly wound coils 3,130 N/A 3,130 3,443 3,756 4,069   7222 Other bars and rods of stainless steel; angles, shapes and sections of stainless steel, n.e.s. see below see below see below see below see below see below   7222 11 Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only hot-extruded, of circular cross-section 3,130 N/A 3,130 3,443 3,756 4,069   7222 19 Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only extruded (excl. of circular cross-section) 3,130 N/A 3,130 3,443 3,756 4,069   7222 20 Other bars and rods of stainless steel, not further worked than cold-formed or cold-finished 3,130 N/A 3,130 3,443 3,756 4,069   7222 30 Other bars and rods of stainless steel, cold-formed or cold-finished and further worked, or not further worked than forged, or forged, or hot-formed by other means and further worked, n.e.s. 3,130 N/A 3,130 3,443 3,756 4,069   7222 40 Angles, shapes and sections of stainless steel, n.e.s. 3,130 N/A 3,130 3,443 3,756 4,069   7223 Wire of stainless steel, in coils (excl. bars and rods) see below see below see below see below see below see below   7223 00 Wire of stainless steel, in coils (excl. bars and rods) 3,130 N/A 3,130 3,443 3,756 4,069   7224 Steel, alloy, other than stainless, in ingots or other primary forms, semi-finished products of alloy steel other than stainless (excl. waste and scrap in ingot form, and products obtained by continuous casting) see below see below see below see below see below see below   7224 10 Steel, alloy, other than stainless, in ingots or other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) 3,390 N/A 3,390 3,729 4,068 4,407 (H) 7224 90 02 Semi-finished products of tool steel 3,400 N/A 3,400 3,740 4,080 4,420 (H) 7224 90 03 Semi-finished products of high-speed steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting the width measuring < twice the thickness 3,400 N/A 3,400 3,740 4,080 4,420 (H) 7224 90 05 Semi-finished products of steel containing by weight <= 0,7% of carbon, 0,5% to 1,2% of manganese, 0,6% to 2,3% of silicon, or of steel containing by weight >= 0,0008% of boron with any other element < the minimum content referred to in Note 1 f to chapter 72, of square or rectangular cross-section, hot rolled or obtained by continuous casting, the width measuring < twice the thickness 3,400 N/A 3,400 3,740 4,080 4,420 (H) 7224 90 07 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring < twice the thickness (excl. of tool steel, high-speed steel and articles of subheading 7224.90.05) 3,400 N/A 3,400 3,740 4,080 4,420 (H) 7224 90 14 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring >= twice the thickness (excl. of tool steel) 3,400 N/A 3,400 3,740 4,080 4,420 (H) 7224 90 18 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, forged (excl. of tool steel) 3,390 N/A 3,390 3,729 4,068 4,407 (H) 7224 90 31 Semi-finished products of steel containing by weight 0,9% to 1,15% carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting 3,400 N/A 3,400 3,740 4,080 4,420 (H) 7224 90 38 Semi-finished products of alloy steel, other than stainless steel, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting (excl. of tool steel and products containing by weight 0,9% to 1,15% of carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum) 3,400 N/A 3,400 3,740 4,080 4,420 (H) 7224 90 90 Semi-finished products of alloy steel, other than stainless steel, forged (excl. of tool steel and products of square or rectangular, circular or polygamol cross-section) 3,390 N/A 3,390 3,729 4,068 4,407 (H) 7225 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7225 11 00 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, grain-oriented 4,530 N/A 4,530 4,983 5,436 5,889 (E) 7225 19 10 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, hot-rolled 3,400 N/A 3,400 3,740 4,080 4,420 (E) 7225 19 90 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, cold-rolled "cold-reduced", non-grain-oriented 3,400 N/A 3,400 3,740 4,080 4,420 (H) 7225 30 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, in coils (excl. products of silicon-electrical steel) 3,400 N/A 3,400 3,740 4,080 4,420 (H) 7225 40 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, not in coils (excl. products of silicon-electrical steel) 3,400 N/A 3,400 3,740 4,080 4,420 (H) 7225 50 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of silicon-electrical steel) 3,400 N/A 3,400 3,740 4,080 4,420 (H) 7225 91 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and electrolytically plated or coated with zinc (excl. products of silicon-electrical steel) 3,400 N/A 3,400 3,740 4,080 4,420 (H) 7225 92 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and plated or coated with zinc (excl. electrolytically plated or coated and products of silicon-electrical steel) 3,400 N/A 3,400 3,740 4,080 4,420 (H) 7225 99 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. plated or coated with zinc and products of silicon-electrical steel) 3,400 N/A 3,400 3,740 4,080 4,420 (H) 7226 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7226 11 00 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", grain-oriented 4,530 N/A 4,530 4,983 5,436 5,889 (E) 7226 19 10 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, not further worked than hot-rolled 3,400 N/A 3,400 3,740 4,080 4,420 (E) 7226 19 80 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, cold-rolled "cold-reduced", whether or not further worked, or hot-rolled and further worked, non-grain-oriented 3,400 N/A 3,400 3,740 4,080 4,420 (H) 7226 20 00 Flat-rolled products of high-speed steel, of a width of <= 600 mm, hot-rolled or cold-rolled "cold-reduced" 3,400 N/A 3,400 3,740 4,080 4,420 (H) 7226 91 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than hot-rolled (excl. products of high-speed steel or silicon-electrical steel) 3,400 N/A 3,400 3,740 4,080 4,420 (H) 7226 92 00 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of high-speed steel or silicon-electrical steel) 3,400 N/A 3,400 3,740 4,080 4,420 (H) 7226 99 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. products of high-speed steel or silicon-electrical steel) 3,400 N/A 3,400 3,740 4,080 4,420 (H) 7227 Bars and rods of alloy steel other than stainless, hot-rolled, in irregularly wound coils 3,400 N/A 3,400 3,740 4,080 4,420 (E)/(H) 7228 Other bars and rods of alloy steel other than stainless, angles, shapes and sections of alloy steel other than stainless, n.e.s.; hollow drill bars and rods, of alloy or non-alloy steel see below see below see below see below see below see below   7228 10 20 Bars and rods of high-speed steel, not further worked than hot-rolled, hot-drawn or extruded, and hot-rolled, hot-drawn or extruded, not further worked than clad (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,400 N/A 3,400 3,740 4,080 4,420 (H) 7228 10 50 Bars and rods of high-speed steel, forged (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,390 N/A 3,390 3,729 4,068 4,407 (H) 7228 10 90 Bars and rods of high-speed steel, not further worked than cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked (excl. forged products, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,400 N/A 3,400 3,740 4,080 4,420 (H) 7228 20 Bars and rods of silico-manganese steel (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,400 N/A 3,400 3,740 4,080 4,420 (H) 7228 30 Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,400 N/A 3,400 3,740 4,080 4,420 (E)/(H) 7228 40 Bars and rods of alloy steel other than stainless, not further worked than forged (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,390 N/A 3,390 3,729 4,068 4,407 (H) 7228 50 Bars and rods of alloy steel other than stainless, not further worked than cold-formed or cold-finished (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,400 N/A 3,400 3,740 4,080 4,420 (E)/(H) 7228 60 Bars and rods of alloy steel other than stainless, cold-formed or cold-finished and further worked or hot-formed and further worked, n.e.s. (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,400 N/A 3,400 3,740 4,080 4,420 (H) 7228 70 Angles, shapes and sections of alloy steel other than stainless, n.e.s. 3,400 N/A 3,400 3,740 4,080 4,420 (H) 7228 80 00 Hollow drill bars and rods, of alloy or non-alloy steel 3,400 N/A 3,400 3,740 4,080 4,420 (H) 7229 Wire of alloy steel other than stainless, in coils (excl. bars and rods) 3,400 N/A 3,400 3,740 4,080 4,420 (E)/(H) 7301 Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel 0,520 N/A 0,520 0,572 0,624 0,676 (E) 7302 Railway or tramway track construction material of iron or steel, the following : rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers "cross-ties", fish-plates, chairs, chair wedges, sole plates "base plates", rail clips, bedplates, ties and other material specialised for jointing or fixing rails 2,510 N/A 2,510 2,761 3,012 3,263 (E) 7303 Tubes, pipes and hollow profiles, of cast iron see below see below see below see below see below see below   7303 00 Tubes, pipes and hollow profiles, of cast iron 1,350 N/A 1,350 1,485 1,620 1,755   7304 Tubes, pipes and hollow profiles, seamless, of iron or steel (excl. products of cast iron) see below see below see below see below see below see below   7304 11 00 Line pipe of a kind used for oil or gas pipelines, seamless, of stainless steel 3,130 N/A 3,130 3,443 3,756 4,069   7304 19 Line pipe of a kind used for oil or gas pipelines, seamless, of iron or steel (excl. products of stainless steel or of cast iron) 0,560 N/A 0,560 0,616 0,672 0,728 (E) 7304 22 00 Drill pipe, seamless, of stainless steel, of a kind used in drilling for oil or gas 3,130 N/A 3,130 3,443 3,756 4,069   7304 23 00 Drill pipe, seamless, of a kind used in drilling for oil or gas, of iron or steel (excl. products of stainless steel or of cast iron) 0,560 N/A 0,560 0,616 0,672 0,728 (E) 7304 24 00 Casing and tubing, seamless, of a kind used for drilling for oil or gas, of stainless steel 3,130 N/A 3,130 3,443 3,756 4,069   7304 29 Casing and tubing, seamless, of iron or steel, of a kind used in drilling for oil or gas (excl. products of cast iron) 0,560 N/A 0,560 0,616 0,672 0,728 (E) 7304 31 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" (excl. cast iron products and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used for drilling for oil or gas) 0,560 N/A 0,560 0,616 0,672 0,728 (E) 7304 39 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, not cold-drawn or cold-rolled "cold-reduced" (excl. cast iron products, line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas) 0,560 N/A 0,560 0,616 0,672 0,728 (E) 7304 41 00 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas) 3,130 N/A 3,130 3,443 3,756 4,069   7304 49 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines or of a kind used for drilling for oil or gas) 3,130 N/A 3,130 3,443 3,756 4,069   7304 51 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil) 0,560 N/A 0,560 0,616 0,672 0,728 (H) 7304 59 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil) 0,560 N/A 0,560 0,616 0,672 0,728 (E)/(H) 7304 90 00 Tubes, pipes and hollow profiles, seamless, of non-circular cross-section, of iron or steel (excl. products of cast iron) 0,560 N/A 0,560 0,616 0,672 0,728 (E) 7305 Tubes and pipes, having circular cross-sections and an external diameter of > 406,4 mm, of flat-rolled products of iron or steel "e.g., welded, riveted or similarly closed" 0,560 N/A 0,560 0,616 0,672 0,728 (E) 7306 Tubes, pipes and hollow profiles "e.g., open seam or welded, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless tubes and pipes and tubes having internal and external circular cross-sections and an external diameter of > 406,4 mm) see below see below see below see below see below see below   7306 11 00 Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm 3,130 N/A 3,130 3,443 3,756 4,069   7306 19 00 Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron) 0,560 N/A 0,560 0,616 0,672 0,728 (E) 7306 21 00 Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm 3,130 N/A 3,130 3,443 3,756 4,069   7306 29 00 Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron) 0,560 N/A 0,560 0,616 0,672 0,728 (E) 7306 30 12 Precision tubes, welded, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" 0,560 N/A 0,560 0,616 0,672 0,728 (E) 7306 30 18 Precision tubes, welded, of circular cross-section, of iron or non-alloy steel (excl. cold-drawn or cold-rolled) 0,560 N/A 0,560 0,616 0,672 0,728   7306 30 41 Threaded or threadable tubes "gas pipe", welded, of circular cross-section, of iron or non-alloy steel, plated or coated with zinc 0,560 N/A 0,560 0,616 0,672 0,728 (E) 7306 30 49 Threaded or threadable tubes "gas pipe", welded, of circular cross-section, of iron or non-alloy steel (excl. products plated or coated with zinc) 0,560 N/A 0,560 0,616 0,672 0,728 (E) 7306 30 72 Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel, of an external diameter of <= 168,3 mm, plated or coated with zinc (excl. line pipe of a kind used for oil or gas pipelines or casing and tubingof a kind used in drilling for oil or gas) 0,560 N/A 0,560 0,616 0,672 0,728 (E) 7306 30 77 Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel of an external diameter of <= 168,3 mm (excl. plated or coated with zinc and line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used in drilling for oil or gas, precision tubes and threaded or threadable tubes "gas pipe") 0,560 N/A 0,560 0,616 0,672 0,728 (E) 7306 30 80 Tubes, pipes and hollow profiles, welded, having a circular cross-section, of iron or steel, of an external diameter of > 168,3 mm but <= 406,4 mm (excl. line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, or precision steel tubes, electrical conduit tubes or threaded or threadable tubes "gas pipe") 0,560 N/A 0,560 0,616 0,672 0,728 (E) 7306 40 20 Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. products having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) 3,130 N/A 3,130 3,443 3,756 4,069   7306 40 80 Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel (excl. products cold-drawn or cold-rolled "cold-reduced", tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) 3,130 N/A 3,130 3,443 3,756 4,069   7306 50 21 Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" 0,560 N/A 0,560 0,616 0,672 0,728 (H) 7306 50 29 Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless (excl. cold-drawn or cold-rolled) 0,560 N/A 0,560 0,616 0,672 0,728 (H) 7306 50 80 Tubes, pipes and hollow profiles, welded, of circular cross-section, of alloy steel other than stainless (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and precision steel tubes) 0,560 N/A 0,560 0,616 0,672 0,728 (H) 7306 61 10 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel 3,130 N/A 3,130 3,443 3,756 4,069   7306 61 92 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of <= 2 mm 0,560 N/A 0,560 0,616 0,672 0,728 (E) 7306 61 99 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of > 2 mm 0,560 N/A 0,560 0,616 0,672 0,728 (E) 7306 69 10 Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) 3,130 N/A 3,130 3,443 3,756 4,069   7306 69 90 Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of iron or steel other than stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) 0,560 N/A 0,560 0,616 0,672 0,728 (E) 7306 90 00 Tubes, pipes and hollow profiles "e.g., open seam, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless or welded tubes and pipes and tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm) 0,560 N/A 0,560 0,616 0,672 0,728 (E) 7307 Tube or pipe fittings "e.g. couplings, elbows, sleeves", of iron or steel see below see below see below see below see below see below   7307 11 Tube or pipe fittings of non-malleable cast iron 1,350 N/A 1,350 1,485 1,620 1,755   7307 19 10 Tube or pipe fittings of cast iron (excl. of non-malleable) 1,350 N/A 1,350 1,485 1,620 1,755   7307 19 90 Cast tube or pipe fittings of steel 0,470 N/A 0,470 0,517 0,564 0,611 (E) 7307 21 00 Flanges of stainless steel (excl. cast products) 2,640 N/A 2,640 2,904 3,168 3,432   7307 22 Threaded elbows, bends and sleeves of stainless steel (excl. cast products) 2,640 N/A 2,640 2,904 3,168 3,432   7307 23 Butt welding tube or pipe fittings of stainless steel (excl. cast products) 2,640 N/A 2,640 2,904 3,168 3,432   7307 29 Tube or pipe fittings of stainless steel (excl. cast products, flanges, threaded elbows, bends and sleeves and butt weldings fittings) 2,640 N/A 2,640 2,904 3,168 3,432   7307 91 00 Flanges of iron or steel (excl. cast or stainless products) 0,470 N/A 0,470 0,517 0,564 0,611 (E) 7307 92 Threaded elbows, bends and sleeves, of stainless steel (excl. cast or stainless products) 0,470 N/A 0,470 0,517 0,564 0,611 (E) 7307 93 Butt welding fittings of iron or steel (excl. cast iron or stainless steel products, and flanges) 0,470 N/A 0,470 0,517 0,564 0,611 (E) 7307 99 Tube or pipe fittings, of iron or steel (excl. cast iron or stainless steel products; flanges; threaded elbows, bends and sleeves; butt welding fittings) 0,470 N/A 0,470 0,517 0,564 0,611 (E) 7308 Structures and parts of structures "e.g., bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns", of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel (excl. prefabricated buildings of heading 9406) 2,700 N/A 2,700 2,970 3,240 3,510 (E) 7309 Reservoirs, tanks, vats and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of > 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated (excl. containers specifically constructed or equipped for one or more types of transport) 3,100 N/A 3,100 3,410 3,720 4,030 (E) 7310 Tanks, casks, drums, cans, boxes and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of <= 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated, n.e.s. 0,570 N/A 0,570 0,627 0,684 0,741 (E) 7311 Containers of iron or steel, for compressed or liquefied gas (excl. containers specifically constructed or equipped for one or more types of transport) see below see below see below see below see below see below   7311 00 Containers of iron or steel, for compressed or liquefied gas (excl. containers specifically constructed or equipped for one or more types of transport) 3,100 N/A 3,100 3,410 3,720 4,030 (E) 7318 Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers, incl. spring washers, and similar articles, of iron or steel (excl. lag screws, stoppers, plugs and the like, threaded) see below see below see below see below see below see below   7318 11 00 Coach screws of iron or steel 0,470 N/A 0,470 0,517 0,564 0,611 (E) 7318 12 10 Wood screws of stainless steel (excl. coach screws) 3,130 N/A 3,130 3,443 3,756 4,069 (E) 7318 12 90 Wood screws of iron or steel other than stainless (excl. coach screws) 0,470 N/A 0,470 0,517 0,564 0,611 (E) 7318 13 00 Screw hooks and screw rings, of iron or steel 0,470 N/A 0,470 0,517 0,564 0,611 (E) 7318 14 10 Self-tapping screws, of stainless steel (excl. wood screws) 3,130 N/A 3,130 3,443 3,756 4,069 (E) 7318 14 91 Spaced-thread screws of iron or steel other than stainless 0,470 N/A 0,470 0,517 0,564 0,611 (E) 7318 14 99 Self-tapping screws of iron or steel other than stainless (excl. spaced-thread screws and wood screws) 0,470 N/A 0,470 0,517 0,564 0,611 (E) 7318 15 Threaded screws and bolts, of iron or steel, whether or not with their nuts and washers (excl. coach screws and other wood screws, screw hooks and screw rings, self-tapping screws, lag screws, stoppers, plugs and the like, threaded) 2,300 N/A 2,300 2,530 2,760 2,990 (E) 7318 16 Nuts of iron or steel 2,900 N/A 2,900 3,190 3,480 3,770 (E) 7318 19 00 Threaded articles, of iron or steel, n.e.s. 0,470 N/A 0,470 0,517 0,564 0,611 (E) 7318 21 00 Spring washers and other lock washers, of iron or steel 0,470 N/A 0,470 0,517 0,564 0,611 (E) 7318 22 00 Washers of iron or steel (excl. spring washers and other lock washers) 1,290 N/A 1,290 1,419 1,548 1,677 (E) 7318 23 00 Rivets of iron or steel (excl. tubular and bifurcated rivets for particular uses) 1,040 N/A 1,040 1,144 1,248 1,352 (E) 7318 24 00 Cotters and cotter pins, of iron or steel 0,470 N/A 0,470 0,517 0,564 0,611 (E) 7318 29 00 Non-threaded articles, of iron or steel 0,470 N/A 0,470 0,517 0,564 0,611 (E) 7326 Articles of iron or steel, n.e.s. (excl. cast articles) see below see below see below see below see below see below   7326 11 00 Grinding balls and similar articles for mills, of iron or steel, forged or stamped, but not further worked 0,470 N/A 0,470 0,517 0,564 0,611 (E) 7326 19 Articles of iron or steel, forged or stamped, but not further worked, n.e.s. (excl. grinding balls and similar articles for mills) 0,470 N/A 0,470 0,517 0,564 0,611 (E) 7326 20 00 Articles of iron or steel wire, n.e.s. 0,470 N/A 0,470 0,517 0,564 0,611 (E) 7326 90 30 Ladders and steps, of iron or steel 0,470 N/A 0,470 0,517 0,564 0,611 (E) 7326 90 40 Pallets and similar platforms for handling goods, of iron or steel 0,470 N/A 0,470 0,517 0,564 0,611 (E) 7326 90 50 Reels for cables, piping and the like, of iron or steel 0,470 N/A 0,470 0,517 0,564 0,611 (E) 7326 90 60 Ventilators, non-mechanical, guttering, hooks and like articles used in the building industry, n.e.s., of iron or steel 0,470 N/A 0,470 0,517 0,564 0,611 (E) 7326 90 92 Articles of iron or steel, open-die forged, n.e.s. 0,470 N/A 0,470 0,517 0,564 0,611 (E) 7326 90 94 Articles of iron or steel, closed-die forged, n.e.s. 0,470 N/A 0,470 0,517 0,564 0,611 (E) 7326 90 96 Sintered articles of iron or steel, n.e.s. 0,470 N/A 0,470 0,517 0,564 0,611 (E) 7326 90 98 Articles of iron or steel, n.e.s. 0,470 N/A 0,470 0,517 0,564 0,611 (E) Namibia Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – – – –   2523 10 00 White clinker – – – – – –   2523 10 00 Grey clinker 0,880 0 0,880 0,968 1,056 1,144 (A) 2523 21 00 White Portland cement – – – – – –   2523 29 00 Grey Portland cement 0,880 0,010 0,890 0,979 1,068 1,157   2523 90 00 White hydraulic cements – – – – – –   2523 90 00 Grey hydraulic cements 0,840 0,010 0,850 0,935 1,02 1,105 (A) 2523 30 00 Aluminous cement – – – – – –   Nepal Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 1,770 0,070 1,840 1,858 1,858 1,858   2814 10 00 Anhydrous ammonia – – – – – –   2814 20 00 Ammonia in aqueous solution 0,700 0,060 0,770 0,778 0,778 0,778   2834 21 00 Nitrate of potassium 1,610 0,090 1,700 1,717 1,717 1,717   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,520 0,050 0,570 0,576 0,576 0,576   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,860 0,050 0,910 0,919 0,919 0,919   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,570 0,140 1,720 1,737 1,737 1,737   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,540 0,140 1,680 1,697 1,697 1,697   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,680 0,090 0,770 0,778 0,778 0,778   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,170 0,100 1,270 1,283 1,283 1,283   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,220 0,080 1,310 1,323 1,323 1,323   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,880 0,130 2,010 2,030 2,030 2,030   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,630 0,110 1,740 1,757 1,757 1,757   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,630 0,110 1,740 1,757 1,757 1,757   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,760 0,110 2,870 2,899 2,899 2,899   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,580 0,110 1,690 1,707 1,707 1,707   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,340 0,100 1,440 1,454 1,454 1,454   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,490 0,120 1,610 1,626 1,626 1,626   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,700 0,080 0,780 0,788 0,788 0,788   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,820 0,090 0,910 0,919 0,919 0,919   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,560 0,070 0,630 0,636 0,636 0,636   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,550 0,070 0,610 0,616 0,616 0,616   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,350 0,050 0,400 0,404 0,404 0,404   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,120 0,110 1,240 1,252 1,252 1,252   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,630 0,110 0,740 0,747 0,747 0,747   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,080 0,080 1,170 1,182 1,182 1,182   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,560 0,050 0,610 0,616 0,616 0,616   New Zealand Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – – – –   2523 10 00 White clinker – – – – – –   2523 10 00 Grey clinker 0,870 0,010 0,880 0,968 1,056 1,144 (A) 2523 21 00 White Portland cement – – – – – –   2523 29 00 Grey Portland cement 0,890 0,030 0,920 1,012 1,104 1,196   2523 90 00 White hydraulic cements – – – – – –   2523 90 00 Grey hydraulic cements 0,850 0,030 0,880 0,968 1,056 1,144 (A) 2523 30 00 Aluminous cement – – – – – –   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 1,590 0,030 1,620 1,636 1,636 1,636   2814 10 00 Anhydrous ammonia 1,760 0,040 1,800 1,818 1,818 1,818   2814 20 00 Ammonia in aqueous solution 0,530 0,010 0,540 0,545 0,545 0,545   2834 21 00 Nitrate of potassium 1,380 0,030 1,420 1,434 1,434 1,434   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,400 0,010 0,420 0,424 0,424 0,424   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,670 0,010 0,680 0,687 0,687 0,687   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,220 0,040 1,250 1,263 1,263 1,263   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,190 0,040 1,230 1,242 1,242 1,242   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,530 0,030 0,550 0,556 0,556 0,556   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 0,970 0,040 1 1,010 1,010 1,010   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,050 0,030 1,090 1,101 1,101 1,101   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,620 0,050 1,670 1,687 1,687 1,687   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,400 0,040 1,450 1,465 1,465 1,465   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,400 0,040 1,450 1,465 1,465 1,465   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,480 0,050 2,530 2,555 2,555 2,555   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,360 0,040 1,400 1,414 1,414 1,414   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,110 0,040 1,140 1,151 1,151 1,151   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,210 0,040 1,240 1,252 1,252 1,252   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,570 0,030 0,610 0,616 0,616 0,616   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,710 0,040 0,750 0,758 0,758 0,758   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,480 0,030 0,510 0,515 0,515 0,515   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,420 0,020 0,440 0,444 0,444 0,444   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,270 0,020 0,290 0,293 0,293 0,293   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 0,960 0,050 1,010 1,020 1,020 1,020   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,490 0,060 0,550 0,556 0,556 0,556   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,930 0,030 0,960 0,970 0,970 0,970   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,480 0,020 0,500 0,505 0,505 0,505   Aluminium         10 % mark-up 20 % mark-up 30 % mark-up   7601 Unwrought aluminium 1,700 N/A 1,700 1,870 2,040 2,210 (K) 7603 Aluminium powders and flakes 1,810 N/A 1,810 1,991 2,172 2,353 (K) 7604 10 10 Bars and rods 2,030 N/A 2,030 2,233 2,436 2,639 (K) 7604 10 90 Profiles 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7604 21 00 Hollow profiles 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7604 29 10 Bars and rods 2,030 N/A 2,030 2,233 2,436 2,639 (K) 7604 29 90 Profiles 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7605 Aluminium wire 2,030 N/A 2,030 2,233 2,436 2,639 (K) 7606 Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7608 Aluminium tubes and pipes 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7609 00 00 Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7610 10 00 Doors, windows and their frames and thresholds for doors 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7610 90 Other 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7610 90 10 Bridges and bridge-sections, towers and lattice masts 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7610 90 90 Other 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7611 00 00 Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7612 Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7613 00 00 Aluminium containers for compressed or liquefied gas 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7614 Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated 2,030 N/A 2,030 2,233 2,436 2,639 (K) 7616 10 00 Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7616 91 00 Cloth, grill, netting and fencing, of aluminium wire 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7616 99 10 Cast 1,810 N/A 1,810 1,991 2,172 2,353 (K) 7616 99 90 Other 2,490 N/A 2,490 2,739 2,988 3,237 (K) Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066   Iron and steel         10 % mark-up 20 % mark-up 30 % mark-up   2601 12 00 Agglomerated iron ores and concentrates (excl. roasted iron pyrites) 0,070 0,040 0,100 0,110 0,120 0,130   7201 Pig iron and spiegeleisen, in pigs, blocks or other primary forms 2,310 N/A 2,310 2,541 2,772 3,003   7202 11 Ferro-manganese, containing by weight > 2% of carbon – N/A – – – –   7202 19 Ferro-manganese, containing by weight <= 2% carbon – N/A – – – –   7202 41 Ferro-chromium, containing by weight > 4% of carbon – N/A – – – –   7202 49 Ferro-chromium, containing by weight <= 4% of carbon – N/A – – – –   7202 60 00 Ferro-nickel – N/A – – – –   7203 Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99,94%, in lumps, pellets or similar forms – N/A – – – –   7205 Granules and powders of pig iron, spiegeleisen, iron or steel (excl. granules and powders of ferro-alloys, turnings and filings of iron or steel, radioactive iron powders "isotopes" and certain low-calibre, substandard balls for ballbearings) 2,320 N/A 2,320 2,552 2,784 3,016 (C) 7206 Iron and non-alloy steel in ingots or other primary forms (excl. remelting scrap ingots, products obtained by continuous casting and iron of heading 7203) see below see below see below see below see below see below   7206 10 00 Ingots, of iron and non-alloy steel (excl. remelted scrap ingots, continuous cast products, iron of heading 7203) 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7206 90 00 Iron and non-alloy steel, in puddled bars or other primary forms (excl. ingots, remelted scrap ingots, continuous cast products, iron of heading 7203) 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7207 Semi-finished products of iron or non-alloy steel see below see below see below see below see below see below   7207 11 11 Semi-finished products, of non-alloy free-cutting steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7207 11 14 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness of <= 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel) 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7207 11 16 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness of > 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel) 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7207 11 90 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular cross-section, the width < twice the thickness, forged 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7207 12 10 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtained by continuous casting 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7207 12 90 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular "other than square" cross-section, the width >= twice the thickness, forged 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7207 19 12 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7207 19 19 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, forged 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7207 19 80 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon (excl. semi-products, of square, rectangular, circular or polygonal cross-section) 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7207 20 11 Semi-finished products, of non-alloy free-cutting steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7207 20 15 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% but < 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel) 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7207 20 17 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel) 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7207 20 19 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, forged 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7207 20 32 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtained by continuous casting 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7207 20 39 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of rectangular "other than square" cross-section and the width >= twice the thickness, forged 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7207 20 52 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7207 20 59 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of circular or polygonal cross-section, forged 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7207 20 80 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon (excl. those of square, rectangular, circular or polygonal cross-section) 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7208 Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled, not clad, plated or coated 2,420 N/A 2,420 2,662 2,904 3,146 (C) 7209 Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, cold-rolled "cold-reduced", not clad, plated or coated 2,430 N/A 2,430 2,673 2,916 3,159 (C) 7210 Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated 2,430 N/A 2,430 2,673 2,916 3,159 (C) 7211 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", not clad, plated or coated see below see below see below see below see below see below   7211 13 00 Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as "wide flats" 2,420 N/A 2,420 2,662 2,904 3,146 (C) 7211 14 00 Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, not further worked than hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm (excl. "wide flats") 2,420 N/A 2,420 2,662 2,904 3,146 (C) 7211 19 00 Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, simply hot-rolled, not clad, plated or coated, of a thickness < 4,75 mm (excl. "wide flats") 2,420 N/A 2,420 2,662 2,904 3,146 (C) 7211 23 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight < 0,25% of carbon 2,430 N/A 2,430 2,673 2,916 3,159 (C) 7211 29 00 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight >= 0,25% of carbon 2,430 N/A 2,430 2,673 2,916 3,159 (C) 7211 90 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked, but not clad, plated or coated 2,430 N/A 2,430 2,673 2,916 3,159 (C) 7212 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated 2,430 N/A 2,430 2,673 2,916 3,159 (C) 7213 Bars and rods of iron or non-alloy steel, hot-rolled, in irregularly wound coils 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7214 Bars and rods, of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but incl. those twisted after rolling (excl. in irregularly wound coils) see below see below see below see below see below see below   7214 10 00 Bars and rods, of iron or non-alloy steel, not further worked than forged (excl. in irregularly wound coils) 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7214 20 00 Bars and rods, of iron or non-alloy steel, with indentations, ribs, groves or other deformations produced during the rolling process 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7214 30 00 Bars and rods, of non-alloy free-cutting steel, not further worked than hot-rolled, hot-drawn or hot-extruded (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling) 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7214 91 Bars and rods, of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, of rectangular "other than square" cross-section (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process, bars and rods twisted after rolling and free-cutting steel) 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7214 99 Bars and rods, of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded (excl. of rectangular [other than square] cross-section and those containing indentations, ribs, grooves or other deformations produced during the rolling process, and of non-alloy free-cutting steel) 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7215 Bars and rods, of iron or non-alloy steel, cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked, n.e.s. 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7216 Angles, shapes and sections of iron or non-alloy steel, n.e.s. 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7217 Wire of iron or non-alloy steel, in coils (excl. bars and rods) see below see below see below see below see below see below   7217 10 Wire of iron or non-alloy steel, in coils, not plated or coated, whether or not polished (excl. bars and rods) 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7217 20 Wire of iron or non-alloy steel, in coils, plated or coated with zinc (excl. bars and rods) 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7217 30 Wire of iron or non-alloy steel, in coils, plated or coated with base metals (excl. plated or coated with zinc, and bars and rods) 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7217 90 Wire of iron or non-alloy steel, in coils, plated or coated (excl. plated or coated with base metals, and bars and rods) 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7218 Stainless steel in ingots or other primary forms (excl. remelting scrap ingots and products obtained by continuous casting); semi-finished products of stainless steel see below see below see below see below see below see below   7218 10 00 Steel, stainless, in ingots and other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) 3,360 N/A 3,360 3,696 4,032 4,368   7218 91 Semi-finished products of stainless steel, of rectangular "other than square" cross-section 3,380 N/A 3,380 3,718 4,056 4,394   7218 99 11 Semi-finished products of stainless steel, of square cross-section, rolled or obtained by continuous casting 3,380 N/A 3,380 3,718 4,056 4,394   7218 99 19 Semi-finished products of stainless steel, of square cross-section, forged 3,360 N/A 3,360 3,696 4,032 4,368   7218 99 20 Semi-finished products of stainless steel, of circular cross-section or of cross-section other than square or rectangular, rolled or obtained by continuous casting 3,380 N/A 3,380 3,718 4,056 4,394   7218 99 80 Semi-finished products of stainless steel, forged (excl. products of square or rectangular cross-section) 3,360 N/A 3,360 3,696 4,032 4,368   7219 Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7219 11 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of > 10 mm 3,380 N/A 3,380 3,718 4,056 4,394   7219 12 Flat-rolled products of stainless steel, of a width of>= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 4,7 mm and <= 10 mm 3,380 N/A 3,380 3,718 4,056 4,394   7219 13 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 3 mm and < 4,75 mm 3,380 N/A 3,380 3,718 4,056 4,394   7219 14 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of < 3 mm 3,380 N/A 3,380 3,718 4,056 4,394   7219 21 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of > 10 mm 3,380 N/A 3,380 3,718 4,056 4,394   7219 22 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 4,75 mm and <= 10 mm 3,380 N/A 3,380 3,718 4,056 4,394   7219 23 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 3 mm and < 4,75 mm 3,380 N/A 3,380 3,718 4,056 4,394   7219 24 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of < 3 mm 3,380 N/A 3,380 3,718 4,056 4,394   7219 31 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 4,75 mm 3,390 N/A 3,390 3,729 4,068 4,407   7219 32 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 3 mm but < 4,75 mm 3,390 N/A 3,390 3,729 4,068 4,407   7219 33 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of > 1 mm but < 3 mm 3,390 N/A 3,390 3,729 4,068 4,407   7219 34 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 0,5 mm but <= 1 mm 3,390 N/A 3,390 3,729 4,068 4,407   7219 35 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of < 0,5 mm 3,390 N/A 3,390 3,729 4,068 4,407   7219 90 Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked 3,390 N/A 3,390 3,729 4,068 4,407   7220 Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7220 11 00 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of >= 4,75 mm 3,380 N/A 3,380 3,718 4,056 4,394   7220 12 00 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of < 4,75 mm 3,380 N/A 3,380 3,718 4,056 4,394   7220 20 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" 3,390 N/A 3,390 3,729 4,068 4,407   7220 90 Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked 3,390 N/A 3,390 3,729 4,068 4,407   7221 Bars and rods of stainless steel, hot-rolled, in irregularly wound coils 3,360 N/A 3,360 3,696 4,032 4,368   7222 Other bars and rods of stainless steel; angles, shapes and sections of stainless steel, n.e.s. see below see below see below see below see below see below   7222 11 Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only hot-extruded, of circular cross-section 3,360 N/A 3,360 3,696 4,032 4,368   7222 19 Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only extruded (excl. of circular cross-section) 3,360 N/A 3,360 3,696 4,032 4,368   7222 20 Other bars and rods of stainless steel, not further worked than cold-formed or cold-finished 3,360 N/A 3,360 3,696 4,032 4,368   7222 30 Other bars and rods of stainless steel, cold-formed or cold-finished and further worked, or not further worked than forged, or forged, or hot-formed by other means and further worked, n.e.s. 3,360 N/A 3,360 3,696 4,032 4,368   7222 40 Angles, shapes and sections of stainless steel, n.e.s. 3,360 N/A 3,360 3,696 4,032 4,368   7223 Wire of stainless steel, in coils (excl. bars and rods) see below see below see below see below see below see below   7223 00 Wire of stainless steel, in coils (excl. bars and rods) 3,360 N/A 3,360 3,696 4,032 4,368   7224 Steel, alloy, other than stainless, in ingots or other primary forms, semi-finished products of alloy steel other than stainless (excl. waste and scrap in ingot form, and products obtained by continuous casting) see below see below see below see below see below see below   7224 10 Steel, alloy, other than stainless, in ingots or other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) 3,500 N/A 3,500 3,850 4,200 4,550 (F) 7224 90 02 Semi-finished products of tool steel 3,520 N/A 3,520 3,872 4,224 4,576 (F) 7224 90 03 Semi-finished products of high-speed steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting the width measuring < twice the thickness 3,520 N/A 3,520 3,872 4,224 4,576 (F) 7224 90 05 Semi-finished products of steel containing by weight <= 0,7% of carbon, 0,5% to 1,2% of manganese, 0,6% to 2,3% of silicon, or of steel containing by weight >= 0,0008% of boron with any other element < the minimum content referred to in Note 1 f to chapter 72, of square or rectangular cross-section, hot rolled or obtained by continuous casting, the width measuring < twice the thickness 3,520 N/A 3,520 3,872 4,224 4,576 (F) 7224 90 07 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring < twice the thickness (excl. of tool steel, high-speed steel and articles of subheading 7224.90.05) 3,520 N/A 3,520 3,872 4,224 4,576 (F) 7224 90 14 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring >= twice the thickness (excl. of tool steel) 3,520 N/A 3,520 3,872 4,224 4,576 (F) 7224 90 18 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, forged (excl. of tool steel) 3,500 N/A 3,500 3,850 4,200 4,550 (F) 7224 90 31 Semi-finished products of steel containing by weight 0,9% to 1,15% carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting 3,520 N/A 3,520 3,872 4,224 4,576 (F) 7224 90 38 Semi-finished products of alloy steel, other than stainless steel, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting (excl. of tool steel and products containing by weight 0,9% to 1,15% of carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum) 3,520 N/A 3,520 3,872 4,224 4,576 (F) 7224 90 90 Semi-finished products of alloy steel, other than stainless steel, forged (excl. of tool steel and products of square or rectangular, circular or polygamol cross-section) 3,500 N/A 3,500 3,850 4,200 4,550 (F) 7225 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7225 11 00 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, grain-oriented 4,660 N/A 4,660 5,126 5,592 6,058 (C) 7225 19 10 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, hot-rolled 3,520 N/A 3,520 3,872 4,224 4,576 (C) 7225 19 90 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, cold-rolled "cold-reduced", non-grain-oriented 3,530 N/A 3,530 3,883 4,236 4,589 (F) 7225 30 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, in coils (excl. products of silicon-electrical steel) 3,520 N/A 3,520 3,872 4,224 4,576 (F) 7225 40 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, not in coils (excl. products of silicon-electrical steel) 3,520 N/A 3,520 3,872 4,224 4,576 (F) 7225 50 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of silicon-electrical steel) 3,530 N/A 3,530 3,883 4,236 4,589 (F) 7225 91 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and electrolytically plated or coated with zinc (excl. products of silicon-electrical steel) 3,530 N/A 3,530 3,883 4,236 4,589 (F) 7225 92 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and plated or coated with zinc (excl. electrolytically plated or coated and products of silicon-electrical steel) 3,530 N/A 3,530 3,883 4,236 4,589 (F) 7225 99 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. plated or coated with zinc and products of silicon-electrical steel) 3,530 N/A 3,530 3,883 4,236 4,589 (F) 7226 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7226 11 00 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", grain-oriented 4,660 N/A 4,660 5,126 5,592 6,058 (C) 7226 19 10 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, not further worked than hot-rolled 3,520 N/A 3,520 3,872 4,224 4,576 (C) 7226 19 80 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, cold-rolled "cold-reduced", whether or not further worked, or hot-rolled and further worked, non-grain-oriented 3,530 N/A 3,530 3,883 4,236 4,589 (F) 7226 20 00 Flat-rolled products of high-speed steel, of a width of <= 600 mm, hot-rolled or cold-rolled "cold-reduced" 3,520 N/A 3,520 3,872 4,224 4,576 (F) 7226 91 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than hot-rolled (excl. products of high-speed steel or silicon-electrical steel) 3,520 N/A 3,520 3,872 4,224 4,576 (F) 7226 92 00 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of high-speed steel or silicon-electrical steel) 3,530 N/A 3,530 3,883 4,236 4,589 (F) 7226 99 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. products of high-speed steel or silicon-electrical steel) 3,530 N/A 3,530 3,883 4,236 4,589 (F) 7227 Bars and rods of alloy steel other than stainless, hot-rolled, in irregularly wound coils 3,500 N/A 3,500 3,850 4,200 4,550 (C)/(F) 7228 Other bars and rods of alloy steel other than stainless, angles, shapes and sections of alloy steel other than stainless, n.e.s.; hollow drill bars and rods, of alloy or non-alloy steel see below see below see below see below see below see below   7228 10 20 Bars and rods of high-speed steel, not further worked than hot-rolled, hot-drawn or extruded, and hot-rolled, hot-drawn or extruded, not further worked than clad (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,500 N/A 3,500 3,850 4,200 4,550 (F) 7228 10 50 Bars and rods of high-speed steel, forged (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,500 N/A 3,500 3,850 4,200 4,550 (F) 7228 10 90 Bars and rods of high-speed steel, not further worked than cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked (excl. forged products, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,500 N/A 3,500 3,850 4,200 4,550 (F) 7228 20 Bars and rods of silico-manganese steel (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,500 N/A 3,500 3,850 4,200 4,550 (F) 7228 30 Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,500 N/A 3,500 3,850 4,200 4,550 (C)/(F) 7228 40 Bars and rods of alloy steel other than stainless, not further worked than forged (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,500 N/A 3,500 3,850 4,200 4,550 (F) 7228 50 Bars and rods of alloy steel other than stainless, not further worked than cold-formed or cold-finished (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,500 N/A 3,500 3,850 4,200 4,550 (C)/(F) 7228 60 Bars and rods of alloy steel other than stainless, cold-formed or cold-finished and further worked or hot-formed and further worked, n.e.s. (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,500 N/A 3,500 3,850 4,200 4,550 (F) 7228 70 Angles, shapes and sections of alloy steel other than stainless, n.e.s. 3,500 N/A 3,500 3,850 4,200 4,550 (F) 7228 80 00 Hollow drill bars and rods, of alloy or non-alloy steel 3,500 N/A 3,500 3,850 4,200 4,550 (F) 7229 Wire of alloy steel other than stainless, in coils (excl. bars and rods) 3,500 N/A 3,500 3,850 4,200 4,550 (C)/(F) 7301 Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel 2,430 N/A 2,430 2,673 2,916 3,159 (C) 7302 Railway or tramway track construction material of iron or steel, the following : rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers "cross-ties", fish-plates, chairs, chair wedges, sole plates "base plates", rail clips, bedplates, ties and other material specialised for jointing or fixing rails 3,060 N/A 3,060 3,366 3,672 3,978 (C) 7303 Tubes, pipes and hollow profiles, of cast iron see below see below see below see below see below see below   7303 00 Tubes, pipes and hollow profiles, of cast iron 2,310 N/A 2,310 2,541 2,772 3,003   7304 Tubes, pipes and hollow profiles, seamless, of iron or steel (excl. products of cast iron) see below see below see below see below see below see below   7304 11 00 Line pipe of a kind used for oil or gas pipelines, seamless, of stainless steel 3,360 N/A 3,360 3,696 4,032 4,368   7304 19 Line pipe of a kind used for oil or gas pipelines, seamless, of iron or steel (excl. products of stainless steel or of cast iron) 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7304 22 00 Drill pipe, seamless, of stainless steel, of a kind used in drilling for oil or gas 3,360 N/A 3,360 3,696 4,032 4,368   7304 23 00 Drill pipe, seamless, of a kind used in drilling for oil or gas, of iron or steel (excl. products of stainless steel or of cast iron) 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7304 24 00 Casing and tubing, seamless, of a kind used for drilling for oil or gas, of stainless steel 3,360 N/A 3,360 3,696 4,032 4,368   7304 29 Casing and tubing, seamless, of iron or steel, of a kind used in drilling for oil or gas (excl. products of cast iron) 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7304 31 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" (excl. cast iron products and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used for drilling for oil or gas) 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7304 39 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, not cold-drawn or cold-rolled "cold-reduced" (excl. cast iron products, line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas) 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7304 41 00 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas) 3,360 N/A 3,360 3,696 4,032 4,368   7304 49 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines or of a kind used for drilling for oil or gas) 3,360 N/A 3,360 3,696 4,032 4,368   7304 51 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil) 2,360 N/A 2,360 2,596 2,832 3,068 (F) 7304 59 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil) 2,360 N/A 2,360 2,596 2,832 3,068 (C)/(F) 7304 90 00 Tubes, pipes and hollow profiles, seamless, of non-circular cross-section, of iron or steel (excl. products of cast iron) 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7305 Tubes and pipes, having circular cross-sections and an external diameter of > 406,4 mm, of flat-rolled products of iron or steel "e.g., welded, riveted or similarly closed" 2,430 N/A 2,430 2,673 2,916 3,159 (C) 7306 Tubes, pipes and hollow profiles "e.g., open seam or welded, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless tubes and pipes and tubes having internal and external circular cross-sections and an external diameter of > 406,4 mm) see below see below see below see below see below see below   7306 11 00 Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm 3,390 N/A 3,390 3,729 4,068 4,407   7306 19 00 Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron) 2,430 N/A 2,430 2,673 2,916 3,159 (C) 7306 21 00 Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm 3,390 N/A 3,390 3,729 4,068 4,407   7306 29 00 Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron) 2,430 N/A 2,430 2,673 2,916 3,159 (C) 7306 30 12 Precision tubes, welded, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" 2,430 N/A 2,430 2,673 2,916 3,159 (C) 7306 30 18 Precision tubes, welded, of circular cross-section, of iron or non-alloy steel (excl. cold-drawn or cold-rolled) 2,420 N/A 2,420 2,662 2,904 3,146   7306 30 41 Threaded or threadable tubes "gas pipe", welded, of circular cross-section, of iron or non-alloy steel, plated or coated with zinc 2,430 N/A 2,430 2,673 2,916 3,159 (C) 7306 30 49 Threaded or threadable tubes "gas pipe", welded, of circular cross-section, of iron or non-alloy steel (excl. products plated or coated with zinc) 2,430 N/A 2,430 2,673 2,916 3,159 (C) 7306 30 72 Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel, of an external diameter of <= 168,3 mm, plated or coated with zinc (excl. line pipe of a kind used for oil or gas pipelines or casing and tubingof a kind used in drilling for oil or gas) 2,430 N/A 2,430 2,673 2,916 3,159 (C) 7306 30 77 Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel of an external diameter of <= 168,3 mm (excl. plated or coated with zinc and line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used in drilling for oil or gas, precision tubes and threaded or threadable tubes "gas pipe") 2,430 N/A 2,430 2,673 2,916 3,159 (C) 7306 30 80 Tubes, pipes and hollow profiles, welded, having a circular cross-section, of iron or steel, of an external diameter of > 168,3 mm but <= 406,4 mm (excl. line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, or precision steel tubes, electrical conduit tubes or threaded or threadable tubes "gas pipe") 2,430 N/A 2,430 2,673 2,916 3,159 (C) 7306 40 20 Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. products having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) 3,390 N/A 3,390 3,729 4,068 4,407   7306 40 80 Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel (excl. products cold-drawn or cold-rolled "cold-reduced", tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) 3,380 N/A 3,380 3,718 4,056 4,394   7306 50 21 Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" 2,410 N/A 2,410 2,651 2,892 3,133 (F) 7306 50 29 Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless (excl. cold-drawn or cold-rolled) 2,400 N/A 2,400 2,640 2,880 3,120 (F) 7306 50 80 Tubes, pipes and hollow profiles, welded, of circular cross-section, of alloy steel other than stainless (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and precision steel tubes) 2,410 N/A 2,410 2,651 2,892 3,133 (F) 7306 61 10 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel 3,390 N/A 3,390 3,729 4,068 4,407   7306 61 92 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of <= 2 mm 2,430 N/A 2,430 2,673 2,916 3,159 (C) 7306 61 99 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of > 2 mm 2,430 N/A 2,430 2,673 2,916 3,159 (C) 7306 69 10 Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) 3,390 N/A 3,390 3,729 4,068 4,407   7306 69 90 Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of iron or steel other than stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) 2,430 N/A 2,430 2,673 2,916 3,159 (C) 7306 90 00 Tubes, pipes and hollow profiles "e.g., open seam, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless or welded tubes and pipes and tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm) 2,430 N/A 2,430 2,673 2,916 3,159 (C) 7307 Tube or pipe fittings "e.g. couplings, elbows, sleeves", of iron or steel see below see below see below see below see below see below   7307 11 Tube or pipe fittings of non-malleable cast iron 2,310 N/A 2,310 2,541 2,772 3,003   7307 19 10 Tube or pipe fittings of cast iron (excl. of non-malleable) 2,310 N/A 2,310 2,541 2,772 3,003   7307 19 90 Cast tube or pipe fittings of steel 2,410 N/A 2,410 2,651 2,892 3,133   7307 21 00 Flanges of stainless steel (excl. cast products) 2,820 N/A 2,820 3,102 3,384 3,666   7307 22 Threaded elbows, bends and sleeves of stainless steel (excl. cast products) 2,820 N/A 2,820 3,102 3,384 3,666   7307 23 Butt welding tube or pipe fittings of stainless steel (excl. cast products) 2,820 N/A 2,820 3,102 3,384 3,666   7307 29 Tube or pipe fittings of stainless steel (excl. cast products, flanges, threaded elbows, bends and sleeves and butt weldings fittings) 2,820 N/A 2,820 3,102 3,384 3,666   7307 91 00 Flanges of iron or steel (excl. cast or stainless products) 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7307 92 Threaded elbows, bends and sleeves, of stainless steel (excl. cast or stainless products) 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7307 93 Butt welding fittings of iron or steel (excl. cast iron or stainless steel products, and flanges) 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7307 99 Tube or pipe fittings, of iron or steel (excl. cast iron or stainless steel products; flanges; threaded elbows, bends and sleeves; butt welding fittings) 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7308 Structures and parts of structures "e.g., bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns", of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel (excl. prefabricated buildings of heading 9406) 2,900 N/A 2,900 3,190 3,480 3,770 (C) 7309 Reservoirs, tanks, vats and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of > 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated (excl. containers specifically constructed or equipped for one or more types of transport) 3,040 N/A 3,040 3,344 3,648 3,952 (C) 7310 Tanks, casks, drums, cans, boxes and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of <= 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated, n.e.s. 2,430 N/A 2,430 2,673 2,916 3,159 (C) 7311 Containers of iron or steel, for compressed or liquefied gas (excl. containers specifically constructed or equipped for one or more types of transport) see below see below see below see below see below see below   7311 00 Containers of iron or steel, for compressed or liquefied gas (excl. containers specifically constructed or equipped for one or more types of transport) 3,020 N/A 3,020 3,322 3,624 3,926 (C) 7318 Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers, incl. spring washers, and similar articles, of iron or steel (excl. lag screws, stoppers, plugs and the like, threaded) see below see below see below see below see below see below   7318 11 00 Coach screws of iron or steel 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7318 12 10 Wood screws of stainless steel (excl. coach screws) 3,360 N/A 3,360 3,696 4,032 4,368 (C) 7318 12 90 Wood screws of iron or steel other than stainless (excl. coach screws) 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7318 13 00 Screw hooks and screw rings, of iron or steel 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7318 14 10 Self-tapping screws, of stainless steel (excl. wood screws) 3,360 N/A 3,360 3,696 4,032 4,368 (C) 7318 14 91 Spaced-thread screws of iron or steel other than stainless 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7318 14 99 Self-tapping screws of iron or steel other than stainless (excl. spaced-thread screws and wood screws) 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7318 15 Threaded screws and bolts, of iron or steel, whether or not with their nuts and washers (excl. coach screws and other wood screws, screw hooks and screw rings, self-tapping screws, lag screws, stoppers, plugs and the like, threaded) 2,820 N/A 2,820 3,102 3,384 3,666 (C) 7318 16 Nuts of iron or steel 3,020 N/A 3,020 3,322 3,624 3,926 (C) 7318 19 00 Threaded articles, of iron or steel, n.e.s. 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7318 21 00 Spring washers and other lock washers, of iron or steel 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7318 22 00 Washers of iron or steel (excl. spring washers and other lock washers) 2,470 N/A 2,470 2,717 2,964 3,211 (C) 7318 23 00 Rivets of iron or steel (excl. tubular and bifurcated rivets for particular uses) 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7318 24 00 Cotters and cotter pins, of iron or steel 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7318 29 00 Non-threaded articles, of iron or steel 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7326 Articles of iron or steel, n.e.s. (excl. cast articles) see below see below see below see below see below see below   7326 11 00 Grinding balls and similar articles for mills, of iron or steel, forged or stamped, but not further worked 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7326 19 Articles of iron or steel, forged or stamped, but not further worked, n.e.s. (excl. grinding balls and similar articles for mills) 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7326 20 00 Articles of iron or steel wire, n.e.s. 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7326 90 30 Ladders and steps, of iron or steel 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7326 90 40 Pallets and similar platforms for handling goods, of iron or steel 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7326 90 50 Reels for cables, piping and the like, of iron or steel 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7326 90 60 Ventilators, non-mechanical, guttering, hooks and like articles used in the building industry, n.e.s., of iron or steel 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7326 90 92 Articles of iron or steel, open-die forged, n.e.s. 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7326 90 94 Articles of iron or steel, closed-die forged, n.e.s. 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7326 90 96 Sintered articles of iron or steel, n.e.s. 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7326 90 98 Articles of iron or steel, n.e.s. 2,430 N/A 2,430 2,673 2,916 3,159 (C) Nicaragua Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 1,810 0,070 1,880 1,899 1,899 1,899   2814 10 00 Anhydrous ammonia – – – – – –   2814 20 00 Ammonia in aqueous solution 0,680 0,070 0,750 0,758 0,758 0,758   2834 21 00 Nitrate of potassium 1,620 0,110 1,730 1,747 1,747 1,747   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,510 0,060 0,570 0,576 0,576 0,576   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,840 0,060 0,900 0,909 0,909 0,909   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,530 0,180 1,700 1,717 1,717 1,717   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,500 0,170 1,670 1,687 1,687 1,687   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,660 0,130 0,790 0,798 0,798 0,798   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,160 0,140 1,300 1,313 1,313 1,313   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,230 0,110 1,340 1,353 1,353 1,353   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,900 0,170 2,060 2,081 2,081 2,081   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,640 0,160 1,800 1,818 1,818 1,818   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,640 0,160 1,800 1,818 1,818 1,818   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,820 0,120 2,940 2,969 2,969 2,969   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,590 0,150 1,740 1,757 1,757 1,757   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,330 0,140 1,470 1,485 1,485 1,485   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,470 0,160 1,630 1,646 1,646 1,646   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,690 0,130 0,820 0,828 0,828 0,828   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,830 0,150 0,980 0,990 0,990 0,990   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,560 0,120 0,680 0,687 0,687 0,687   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,530 0,100 0,630 0,636 0,636 0,636   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,340 0,080 0,410 0,414 0,414 0,414   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,130 0,190 1,320 1,333 1,333 1,333   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,610 0,140 0,750 0,758 0,758 0,758   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,090 0,120 1,210 1,222 1,222 1,222   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,560 0,080 0,640 0,646 0,646 0,646   Aluminium         10 % mark-up 20 % mark-up 30 % mark-up   7601 Unwrought aluminium 0,360 N/A 0,360 0,396 0,432 0,468 (L) 7603 Aluminium powders and flakes 0,470 N/A 0,470 0,517 0,564 0,611 (L) 7604 10 10 Bars and rods 0,690 N/A 0,690 0,759 0,828 0,897 (L) 7604 10 90 Profiles 0,710 N/A 0,710 0,781 0,852 0,923 (L) 7604 21 00 Hollow profiles 0,710 N/A 0,710 0,781 0,852 0,923 (L) 7604 29 10 Bars and rods 0,690 N/A 0,690 0,759 0,828 0,897 (L) 7604 29 90 Profiles 0,710 N/A 0,710 0,781 0,852 0,923 (L) 7605 Aluminium wire 0,690 N/A 0,690 0,759 0,828 0,897 (L) 7606 Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm 1,150 N/A 1,150 1,265 1,380 1,495 (L) 7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm 1,150 N/A 1,150 1,265 1,380 1,495 (L) 7608 Aluminium tubes and pipes 0,710 N/A 0,710 0,781 0,852 0,923 (L) 7609 00 00 Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) 0,710 N/A 0,710 0,781 0,852 0,923 (L) 7610 10 00 Doors, windows and their frames and thresholds for doors 0,710 N/A 0,710 0,781 0,852 0,923 (L) 7610 90 Other 0,710 N/A 0,710 0,781 0,852 0,923 (L) 7610 90 10 Bridges and bridge-sections, towers and lattice masts 0,710 N/A 0,710 0,781 0,852 0,923 (L) 7610 90 90 Other 0,710 N/A 0,710 0,781 0,852 0,923 (L) 7611 00 00 Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 1,150 N/A 1,150 1,265 1,380 1,495 (L) 7612 Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 1,150 N/A 1,150 1,265 1,380 1,495 (L) 7613 00 00 Aluminium containers for compressed or liquefied gas 1,150 N/A 1,150 1,265 1,380 1,495 (L) 7614 Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated 0,690 N/A 0,690 0,759 0,828 0,897 (L) 7616 10 00 Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles 1,150 N/A 1,150 1,265 1,380 1,495 (L) 7616 91 00 Cloth, grill, netting and fencing, of aluminium wire 1,150 N/A 1,150 1,265 1,380 1,495 (L) 7616 99 10 Cast 0,470 N/A 0,470 0,517 0,564 0,611 (L) 7616 99 90 Other 1,150 N/A 1,150 1,265 1,380 1,495 (L) Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066   Niger Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – – – –   2523 10 00 White clinker – – – – – –   2523 10 00 Grey clinker 1,240 0,080 1,320 1,452 1,584 1,716 (A) 2523 21 00 White Portland cement – – – – – –   2523 29 00 Grey Portland cement 1,220 0,130 1,350 1,485 1,620 1,755   2523 90 00 White hydraulic cements – – – – – –   2523 90 00 Grey hydraulic cements 1,160 0,130 1,290 1,419 1,548 1,677 (A) 2523 30 00 Aluminous cement – – – – – –   Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 14,030 N/A 14,030 15,433 16,836 18,239   Nigeria Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – – – –   2523 10 00 White clinker – – – – – –   2523 10 00 Grey clinker 1,240 0,030 1,280 1,408 1,536 1,664 (A) 2523 21 00 White Portland cement – – – – – –   2523 29 00 Grey Portland cement 1,240 0,050 1,300 1,430 1,560 1,690   2523 90 00 White hydraulic cements – – – – – –   2523 90 00 Grey hydraulic cements 1,180 0,060 1,240 1,364 1,488 1,612 (A) 2523 30 00 Aluminous cement – – – – – –   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 1,610 0,030 1,650 1,667 1,667 1,667   2814 10 00 Anhydrous ammonia 2,010 0,100 2,110 2,131 2,131 2,131   2814 20 00 Ammonia in aqueous solution 0,600 0,030 0,630 0,636 0,636 0,636   2834 21 00 Nitrate of potassium 1,450 0,050 1,500 1,515 1,515 1,515   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,460 0,030 0,490 0,495 0,495 0,495   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,760 0,030 0,790 0,798 0,798 0,798   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,380 0,080 1,460 1,475 1,475 1,475   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,350 0,080 1,430 1,444 1,444 1,444   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,600 0,060 0,660 0,667 0,667 0,667   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,040 0,070 1,110 1,121 1,121 1,121   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,100 0,050 1,150 1,162 1,162 1,162   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,700 0,080 1,770 1,788 1,788 1,788   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,470 0,070 1,540 1,555 1,555 1,555   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,470 0,070 1,540 1,555 1,555 1,555   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,520 0,050 2,570 2,596 2,596 2,596   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,420 0,070 1,490 1,505 1,505 1,505   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,200 0,060 1,260 1,273 1,273 1,273   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,320 0,070 1,400 1,414 1,414 1,414   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,620 0,060 0,680 0,687 0,687 0,687   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,750 0,070 0,820 0,828 0,828 0,828   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,510 0,060 0,570 0,576 0,576 0,576   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,470 0,040 0,520 0,525 0,525 0,525   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,300 0,040 0,340 0,343 0,343 0,343   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,010 0,090 1,100 1,111 1,111 1,111   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,550 0,080 0,640 0,646 0,646 0,646   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,980 0,050 1,030 1,040 1,040 1,040   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,510 0,040 0,540 0,545 0,545 0,545   Aluminium         10 % mark-up 20 % mark-up 30 % mark-up   7601 Unwrought aluminium 0,360 N/A 0,360 0,396 0,432 0,468 (L) 7603 Aluminium powders and flakes 1,100 N/A 1,100 1,210 1,320 1,430 (L) 7604 10 10 Bars and rods 1,330 N/A 1,330 1,463 1,596 1,729 (L) 7604 10 90 Profiles 1,340 N/A 1,340 1,474 1,608 1,742 (L) 7604 21 00 Hollow profiles 1,340 N/A 1,340 1,474 1,608 1,742 (L) 7604 29 10 Bars and rods 1,330 N/A 1,330 1,463 1,596 1,729 (L) 7604 29 90 Profiles 1,340 N/A 1,340 1,474 1,608 1,742 (L) 7605 Aluminium wire 1,330 N/A 1,330 1,463 1,596 1,729 (L) 7606 Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm 1,790 N/A 1,790 1,969 2,148 2,327 (L) 7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm 1,790 N/A 1,790 1,969 2,148 2,327 (L) 7608 Aluminium tubes and pipes 1,340 N/A 1,340 1,474 1,608 1,742 (L) 7609 00 00 Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) 1,340 N/A 1,340 1,474 1,608 1,742 (L) 7610 10 00 Doors, windows and their frames and thresholds for doors 1,340 N/A 1,340 1,474 1,608 1,742 (L) 7610 90 Other 1,340 N/A 1,340 1,474 1,608 1,742 (L) 7610 90 10 Bridges and bridge-sections, towers and lattice masts 1,340 N/A 1,340 1,474 1,608 1,742 (L) 7610 90 90 Other 1,340 N/A 1,340 1,474 1,608 1,742 (L) 7611 00 00 Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 1,790 N/A 1,790 1,969 2,148 2,327 (L) 7612 Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 1,790 N/A 1,790 1,969 2,148 2,327 (L) 7613 00 00 Aluminium containers for compressed or liquefied gas 1,790 N/A 1,790 1,969 2,148 2,327 (L) 7614 Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated 1,330 N/A 1,330 1,463 1,596 1,729 (L) 7616 10 00 Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles 1,790 N/A 1,790 1,969 2,148 2,327 (L) 7616 91 00 Cloth, grill, netting and fencing, of aluminium wire 1,790 N/A 1,790 1,969 2,148 2,327 (L) 7616 99 10 Cast 1,100 N/A 1,100 1,210 1,320 1,430 (L) 7616 99 90 Other 1,790 N/A 1,790 1,969 2,148 2,327 (L) Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066   North Korea Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – – – –   2523 10 00 White clinker – – – – – –   2523 10 00 Grey clinker 1,360 0,040 1,390 1,529 1,668 1,807 (A) 2523 21 00 White Portland cement – – – – – –   2523 29 00 Grey Portland cement 1,360 0,070 1,420 1,562 1,704 1,846   2523 90 00 White hydraulic cements – – – – – –   2523 90 00 Grey hydraulic cements 1,290 0,070 1,360 1,496 1,632 1,768 (A) 2523 30 00 Aluminous cement – – – – – –   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 2,080 0,050 2,130 2,151 2,151 2,151   2814 10 00 Anhydrous ammonia 2,050 0,150 2,200 2,222 2,222 2,222   2814 20 00 Ammonia in aqueous solution 0,620 0,040 0,660 0,667 0,667 0,667   2834 21 00 Nitrate of potassium 1,750 0,070 1,820 1,838 1,838 1,838   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,440 0,040 0,480 0,485 0,485 0,485   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,740 0,040 0,770 0,778 0,778 0,778   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,340 0,120 1,450 1,465 1,465 1,465   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,310 0,110 1,420 1,434 1,434 1,434   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,590 0,090 0,680 0,687 0,687 0,687   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,180 0,100 1,270 1,283 1,283 1,283   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,330 0,070 1,400 1,414 1,414 1,414   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,040 0,110 2,160 2,182 2,182 2,182   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,750 0,100 1,850 1,869 1,869 1,869   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,750 0,100 1,850 1,869 1,869 1,869   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 3,250 0,070 3,320 3,353 3,353 3,353   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,710 0,100 1,810 1,828 1,828 1,828   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,340 0,090 1,430 1,444 1,444 1,444   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,410 0,110 1,520 1,535 1,535 1,535   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,690 0,090 0,780 0,788 0,788 0,788   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,870 0,110 0,970 0,980 0,980 0,980   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,590 0,080 0,670 0,677 0,677 0,677   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,480 0,060 0,540 0,545 0,545 0,545   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,300 0,050 0,360 0,364 0,364 0,364   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,190 0,130 1,320 1,333 1,333 1,333   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,550 0,100 0,650 0,657 0,657 0,657   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,160 0,080 1,240 1,252 1,252 1,252   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,600 0,060 0,650 0,657 0,657 0,657   Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066   North Macedonia Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – – – –   2523 10 00 White clinker – – – – – –   2523 10 00 Grey clinker 0,850 0,050 0,910 1,001 1,092 1,183 (A) 2523 21 00 White Portland cement – – – – – –   2523 29 00 Grey Portland cement 0,870 0,090 0,960 1,056 1,152 1,248   2523 90 00 White hydraulic cements – – – – – –   2523 90 00 Grey hydraulic cements 0,830 0,090 0,920 1,012 1,104 1,196 (A) 2523 30 00 Aluminous cement – – – – – –   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 2,740 0,060 2,790 2,818 2,818 2,818   2814 10 00 Anhydrous ammonia – – – – – –   2814 20 00 Ammonia in aqueous solution 0,650 0,050 0,700 0,707 0,707 0,707   2834 21 00 Nitrate of potassium 2,190 0,080 2,270 2,293 2,293 2,293   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,440 0,040 0,480 0,485 0,485 0,485   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,720 0,040 0,770 0,778 0,778 0,778   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,310 0,140 1,450 1,465 1,465 1,465   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,280 0,130 1,420 1,434 1,434 1,434   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,600 0,100 0,700 0,707 0,707 0,707   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,380 0,110 1,500 1,515 1,515 1,515   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,650 0,090 1,740 1,757 1,757 1,757   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,540 0,130 2,670 2,697 2,697 2,697   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,150 0,120 2,270 2,293 2,293 2,293   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,150 0,120 2,270 2,293 2,293 2,293   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 4,270 0,090 4,360 4,404 4,404 4,404   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,130 0,120 2,240 2,262 2,262 2,262   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,550 0,100 1,660 1,677 1,677 1,677   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,560 0,120 1,680 1,697 1,697 1,697   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,790 0,100 0,890 0,899 0,899 0,899   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,050 0,120 1,170 1,182 1,182 1,182   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,710 0,090 0,800 0,808 0,808 0,808   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,500 0,080 0,570 0,576 0,576 0,576   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,320 0,060 0,380 0,384 0,384 0,384   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,440 0,150 1,590 1,606 1,606 1,606   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,560 0,110 0,670 0,677 0,677 0,677   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,430 0,090 1,520 1,535 1,535 1,535   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,730 0,060 0,790 0,798 0,798 0,798   Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066   Iron and steel         10 % mark-up 20 % mark-up 30 % mark-up   2601 12 00 Agglomerated iron ores and concentrates (excl. roasted iron pyrites) – – – – – –   7201 Pig iron and spiegeleisen, in pigs, blocks or other primary forms – N/A – – – –   7202 11 Ferro-manganese, containing by weight > 2% of carbon 1,690 N/A 1,690 1,859 2,028 2,197   7202 19 Ferro-manganese, containing by weight <= 2% carbon – N/A – – – –   7202 41 Ferro-chromium, containing by weight > 4% of carbon 2,350 N/A 2,350 2,585 2,820 3,055   7202 49 Ferro-chromium, containing by weight <= 4% of carbon – N/A – – – –   7202 60 00 Ferro-nickel 3,480 N/A 3,480 3,828 4,176 4,524   7203 Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99,94%, in lumps, pellets or similar forms – N/A – – – –   7205 Granules and powders of pig iron, spiegeleisen, iron or steel (excl. granules and powders of ferro-alloys, turnings and filings of iron or steel, radioactive iron powders "isotopes" and certain low-calibre, substandard balls for ballbearings) 1,630 N/A 1,630 1,793 1,956 2,119   7206 Iron and non-alloy steel in ingots or other primary forms (excl. remelting scrap ingots, products obtained by continuous casting and iron of heading 7203) see below see below see below see below see below see below   7206 10 00 Ingots, of iron and non-alloy steel (excl. remelted scrap ingots, continuous cast products, iron of heading 7203) 1,510 N/A 1,510 1,661 1,812 1,963   7206 90 00 Iron and non-alloy steel, in puddled bars or other primary forms (excl. ingots, remelted scrap ingots, continuous cast products, iron of heading 7203) 1,530 N/A 1,530 1,683 1,836 1,989   7207 Semi-finished products of iron or non-alloy steel see below see below see below see below see below see below   7207 11 11 Semi-finished products, of non-alloy free-cutting steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting 1,530 N/A 1,530 1,683 1,836 1,989   7207 11 14 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness of <= 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel) 1,530 N/A 1,530 1,683 1,836 1,989   7207 11 16 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness of > 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel) 1,530 N/A 1,530 1,683 1,836 1,989   7207 11 90 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular cross-section, the width < twice the thickness, forged 1,510 N/A 1,510 1,661 1,812 1,963   7207 12 10 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtained by continuous casting 1,530 N/A 1,530 1,683 1,836 1,989   7207 12 90 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular "other than square" cross-section, the width >= twice the thickness, forged 1,510 N/A 1,510 1,661 1,812 1,963   7207 19 12 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting 1,530 N/A 1,530 1,683 1,836 1,989   7207 19 19 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, forged 1,510 N/A 1,510 1,661 1,812 1,963   7207 19 80 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon (excl. semi-products, of square, rectangular, circular or polygonal cross-section) 1,530 N/A 1,530 1,683 1,836 1,989   7207 20 11 Semi-finished products, of non-alloy free-cutting steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting 1,530 N/A 1,530 1,683 1,836 1,989   7207 20 15 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% but < 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel) 1,530 N/A 1,530 1,683 1,836 1,989   7207 20 17 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel) 1,530 N/A 1,530 1,683 1,836 1,989   7207 20 19 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, forged 1,510 N/A 1,510 1,661 1,812 1,963   7207 20 32 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtained by continuous casting 1,530 N/A 1,530 1,683 1,836 1,989   7207 20 39 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of rectangular "other than square" cross-section and the width >= twice the thickness, forged 1,510 N/A 1,510 1,661 1,812 1,963   7207 20 52 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting 1,530 N/A 1,530 1,683 1,836 1,989   7207 20 59 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of circular or polygonal cross-section, forged 1,510 N/A 1,510 1,661 1,812 1,963   7207 20 80 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon (excl. those of square, rectangular, circular or polygonal cross-section) 1,530 N/A 1,530 1,683 1,836 1,989   7208 Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled, not clad, plated or coated 1,530 N/A 1,530 1,683 1,836 1,989   7209 Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, cold-rolled "cold-reduced", not clad, plated or coated 1,530 N/A 1,530 1,683 1,836 1,989   7210 Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated 1,530 N/A 1,530 1,683 1,836 1,989   7211 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", not clad, plated or coated see below see below see below see below see below see below   7211 13 00 Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as "wide flats" 1,530 N/A 1,530 1,683 1,836 1,989   7211 14 00 Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, not further worked than hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm (excl. "wide flats") 1,530 N/A 1,530 1,683 1,836 1,989   7211 19 00 Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, simply hot-rolled, not clad, plated or coated, of a thickness < 4,75 mm (excl. "wide flats") 1,530 N/A 1,530 1,683 1,836 1,989   7211 23 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight < 0,25% of carbon 1,530 N/A 1,530 1,683 1,836 1,989   7211 29 00 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight >= 0,25% of carbon 1,530 N/A 1,530 1,683 1,836 1,989   7211 90 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked, but not clad, plated or coated 1,530 N/A 1,530 1,683 1,836 1,989   7212 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated 1,530 N/A 1,530 1,683 1,836 1,989   7213 Bars and rods of iron or non-alloy steel, hot-rolled, in irregularly wound coils 1,530 N/A 1,530 1,683 1,836 1,989   7214 Bars and rods, of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but incl. those twisted after rolling (excl. in irregularly wound coils) see below see below see below see below see below see below   7214 10 00 Bars and rods, of iron or non-alloy steel, not further worked than forged (excl. in irregularly wound coils) 1,510 N/A 1,510 1,661 1,812 1,963   7214 20 00 Bars and rods, of iron or non-alloy steel, with indentations, ribs, groves or other deformations produced during the rolling process 1,530 N/A 1,530 1,683 1,836 1,989   7214 30 00 Bars and rods, of non-alloy free-cutting steel, not further worked than hot-rolled, hot-drawn or hot-extruded (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling) 1,530 N/A 1,530 1,683 1,836 1,989   7214 91 Bars and rods, of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, of rectangular "other than square" cross-section (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process, bars and rods twisted after rolling and free-cutting steel) 1,530 N/A 1,530 1,683 1,836 1,989   7214 99 Bars and rods, of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded (excl. of rectangular [other than square] cross-section and those containing indentations, ribs, grooves or other deformations produced during the rolling process, and of non-alloy free-cutting steel) 1,530 N/A 1,530 1,683 1,836 1,989   7215 Bars and rods, of iron or non-alloy steel, cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked, n.e.s. 1,530 N/A 1,530 1,683 1,836 1,989   7216 Angles, shapes and sections of iron or non-alloy steel, n.e.s. 1,922 N/A 1,922 2,114 2,306 2,499   7217 Wire of iron or non-alloy steel, in coils (excl. bars and rods) see below see below see below see below see below see below   7217 10 Wire of iron or non-alloy steel, in coils, not plated or coated, whether or not polished (excl. bars and rods) 1,530 N/A 1,530 1,683 1,836 1,989   7217 20 Wire of iron or non-alloy steel, in coils, plated or coated with zinc (excl. bars and rods) 1,530 N/A 1,530 1,683 1,836 1,989   7217 30 Wire of iron or non-alloy steel, in coils, plated or coated with base metals (excl. plated or coated with zinc, and bars and rods) 1,530 N/A 1,530 1,683 1,836 1,989   7217 90 Wire of iron or non-alloy steel, in coils, plated or coated (excl. plated or coated with base metals, and bars and rods) 1,530 N/A 1,530 1,683 1,836 1,989   7218 Stainless steel in ingots or other primary forms (excl. remelting scrap ingots and products obtained by continuous casting); semi-finished products of stainless steel see below see below see below see below see below see below   7218 10 00 Steel, stainless, in ingots and other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) 2,900 N/A 2,900 3,190 3,480 3,770   7218 91 Semi-finished products of stainless steel, of rectangular "other than square" cross-section 2,910 N/A 2,910 3,201 3,492 3,783   7218 99 11 Semi-finished products of stainless steel, of square cross-section, rolled or obtained by continuous casting 2,910 N/A 2,910 3,201 3,492 3,783   7218 99 19 Semi-finished products of stainless steel, of square cross-section, forged 2,900 N/A 2,900 3,190 3,480 3,770   7218 99 20 Semi-finished products of stainless steel, of circular cross-section or of cross-section other than square or rectangular, rolled or obtained by continuous casting 2,910 N/A 2,910 3,201 3,492 3,783   7218 99 80 Semi-finished products of stainless steel, forged (excl. products of square or rectangular cross-section) 2,900 N/A 2,900 3,190 3,480 3,770   7219 Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7219 11 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of > 10 mm 2,910 N/A 2,910 3,201 3,492 3,783   7219 12 Flat-rolled products of stainless steel, of a width of>= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 4,7 mm and <= 10 mm 2,910 N/A 2,910 3,201 3,492 3,783   7219 13 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 3 mm and < 4,75 mm 2,910 N/A 2,910 3,201 3,492 3,783   7219 14 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of < 3 mm 2,910 N/A 2,910 3,201 3,492 3,783   7219 21 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of > 10 mm 2,910 N/A 2,910 3,201 3,492 3,783   7219 22 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 4,75 mm and <= 10 mm 2,910 N/A 2,910 3,201 3,492 3,783   7219 23 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 3 mm and < 4,75 mm 2,910 N/A 2,910 3,201 3,492 3,783   7219 24 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of < 3 mm 2,910 N/A 2,910 3,201 3,492 3,783   7219 31 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 4,75 mm 2,910 N/A 2,910 3,201 3,492 3,783   7219 32 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 3 mm but < 4,75 mm 2,910 N/A 2,910 3,201 3,492 3,783   7219 33 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of > 1 mm but < 3 mm 2,910 N/A 2,910 3,201 3,492 3,783   7219 34 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 0,5 mm but <= 1 mm 2,910 N/A 2,910 3,201 3,492 3,783   7219 35 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of < 0,5 mm 2,910 N/A 2,910 3,201 3,492 3,783   7219 90 Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked 2,910 N/A 2,910 3,201 3,492 3,783   7220 Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7220 11 00 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of >= 4,75 mm 2,910 N/A 2,910 3,201 3,492 3,783   7220 12 00 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of < 4,75 mm 2,910 N/A 2,910 3,201 3,492 3,783   7220 20 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" 2,910 N/A 2,910 3,201 3,492 3,783   7220 90 Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked 2,910 N/A 2,910 3,201 3,492 3,783   7221 Bars and rods of stainless steel, hot-rolled, in irregularly wound coils 2,910 N/A 2,910 3,201 3,492 3,783   7222 Other bars and rods of stainless steel; angles, shapes and sections of stainless steel, n.e.s. see below see below see below see below see below see below   7222 11 Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only hot-extruded, of circular cross-section 2,910 N/A 2,910 3,201 3,492 3,783   7222 19 Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only extruded (excl. of circular cross-section) 2,910 N/A 2,910 3,201 3,492 3,783   7222 20 Other bars and rods of stainless steel, not further worked than cold-formed or cold-finished 2,910 N/A 2,910 3,201 3,492 3,783   7222 30 Other bars and rods of stainless steel, cold-formed or cold-finished and further worked, or not further worked than forged, or forged, or hot-formed by other means and further worked, n.e.s. 2,900 N/A 2,900 3,190 3,480 3,770   7222 40 Angles, shapes and sections of stainless steel, n.e.s. 2,910 N/A 2,910 3,201 3,492 3,783   7223 Wire of stainless steel, in coils (excl. bars and rods) see below see below see below see below see below see below   7223 00 Wire of stainless steel, in coils (excl. bars and rods) 2,910 N/A 2,910 3,201 3,492 3,783   7224 Steel, alloy, other than stainless, in ingots or other primary forms, semi-finished products of alloy steel other than stainless (excl. waste and scrap in ingot form, and products obtained by continuous casting) see below see below see below see below see below see below   7224 10 Steel, alloy, other than stainless, in ingots or other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) 3,420 N/A 3,420 3,762 4,104 4,446   7224 90 02 Semi-finished products of tool steel 3,440 N/A 3,440 3,784 4,128 4,472   7224 90 03 Semi-finished products of high-speed steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting the width measuring < twice the thickness 3,440 N/A 3,440 3,784 4,128 4,472   7224 90 05 Semi-finished products of steel containing by weight <= 0,7% of carbon, 0,5% to 1,2% of manganese, 0,6% to 2,3% of silicon, or of steel containing by weight >= 0,0008% of boron with any other element < the minimum content referred to in Note 1 f to chapter 72, of square or rectangular cross-section, hot rolled or obtained by continuous casting, the width measuring < twice the thickness 3,440 N/A 3,440 3,784 4,128 4,472   7224 90 07 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring < twice the thickness (excl. of tool steel, high-speed steel and articles of subheading 7224.90.05) 3,440 N/A 3,440 3,784 4,128 4,472   7224 90 14 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring >= twice the thickness (excl. of tool steel) 3,440 N/A 3,440 3,784 4,128 4,472   7224 90 18 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, forged (excl. of tool steel) 3,420 N/A 3,420 3,762 4,104 4,446   7224 90 31 Semi-finished products of steel containing by weight 0,9% to 1,15% carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting 3,440 N/A 3,440 3,784 4,128 4,472   7224 90 38 Semi-finished products of alloy steel, other than stainless steel, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting (excl. of tool steel and products containing by weight 0,9% to 1,15% of carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum) 3,440 N/A 3,440 3,784 4,128 4,472   7224 90 90 Semi-finished products of alloy steel, other than stainless steel, forged (excl. of tool steel and products of square or rectangular, circular or polygamol cross-section) 3,420 N/A 3,420 3,762 4,104 4,446   7225 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7225 11 00 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, grain-oriented 4,550 N/A 4,550 5,005 5,460 5,915   7225 19 10 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, hot-rolled 3,440 N/A 3,440 3,784 4,128 4,472   7225 19 90 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, cold-rolled "cold-reduced", non-grain-oriented 3,440 N/A 3,440 3,784 4,128 4,472   7225 30 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, in coils (excl. products of silicon-electrical steel) 3,440 N/A 3,440 3,784 4,128 4,472   7225 40 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, not in coils (excl. products of silicon-electrical steel) 3,440 N/A 3,440 3,784 4,128 4,472   7225 50 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of silicon-electrical steel) 3,440 N/A 3,440 3,784 4,128 4,472   7225 91 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and electrolytically plated or coated with zinc (excl. products of silicon-electrical steel) 3,440 N/A 3,440 3,784 4,128 4,472   7225 92 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and plated or coated with zinc (excl. electrolytically plated or coated and products of silicon-electrical steel) 3,440 N/A 3,440 3,784 4,128 4,472   7225 99 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. plated or coated with zinc and products of silicon-electrical steel) 3,440 N/A 3,440 3,784 4,128 4,472   7226 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7226 11 00 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", grain-oriented 4,550 N/A 4,550 5,005 5,460 5,915   7226 19 10 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, not further worked than hot-rolled 3,440 N/A 3,440 3,784 4,128 4,472   7226 19 80 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, cold-rolled "cold-reduced", whether or not further worked, or hot-rolled and further worked, non-grain-oriented 3,440 N/A 3,440 3,784 4,128 4,472   7226 20 00 Flat-rolled products of high-speed steel, of a width of <= 600 mm, hot-rolled or cold-rolled "cold-reduced" 3,440 N/A 3,440 3,784 4,128 4,472   7226 91 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than hot-rolled (excl. products of high-speed steel or silicon-electrical steel) 3,440 N/A 3,440 3,784 4,128 4,472   7226 92 00 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of high-speed steel or silicon-electrical steel) 3,440 N/A 3,440 3,784 4,128 4,472   7226 99 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. products of high-speed steel or silicon-electrical steel) 3,440 N/A 3,440 3,784 4,128 4,472   7227 Bars and rods of alloy steel other than stainless, hot-rolled, in irregularly wound coils 3,440 N/A 3,440 3,784 4,128 4,472   7228 Other bars and rods of alloy steel other than stainless, angles, shapes and sections of alloy steel other than stainless, n.e.s.; hollow drill bars and rods, of alloy or non-alloy steel see below see below see below see below see below see below   7228 10 20 Bars and rods of high-speed steel, not further worked than hot-rolled, hot-drawn or extruded, and hot-rolled, hot-drawn or extruded, not further worked than clad (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,440 N/A 3,440 3,784 4,128 4,472   7228 10 50 Bars and rods of high-speed steel, forged (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,420 N/A 3,420 3,762 4,104 4,446   7228 10 90 Bars and rods of high-speed steel, not further worked than cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked (excl. forged products, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,440 N/A 3,440 3,784 4,128 4,472   7228 20 Bars and rods of silico-manganese steel (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,440 N/A 3,440 3,784 4,128 4,472   7228 30 Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,440 N/A 3,440 3,784 4,128 4,472   7228 40 Bars and rods of alloy steel other than stainless, not further worked than forged (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,420 N/A 3,420 3,762 4,104 4,446   7228 50 Bars and rods of alloy steel other than stainless, not further worked than cold-formed or cold-finished (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,440 N/A 3,440 3,784 4,128 4,472   7228 60 Bars and rods of alloy steel other than stainless, cold-formed or cold-finished and further worked or hot-formed and further worked, n.e.s. (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,440 N/A 3,440 3,784 4,128 4,472   7228 70 Angles, shapes and sections of alloy steel other than stainless, n.e.s. 3,440 N/A 3,440 3,784 4,128 4,472   7228 80 00 Hollow drill bars and rods, of alloy or non-alloy steel 3,440 N/A 3,440 3,784 4,128 4,472   7229 Wire of alloy steel other than stainless, in coils (excl. bars and rods) 3,440 N/A 3,440 3,784 4,128 4,472   7301 Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel 1,550 N/A 1,550 1,705 1,860 2,015   7302 Railway or tramway track construction material of iron or steel, the following : rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers "cross-ties", fish-plates, chairs, chair wedges, sole plates "base plates", rail clips, bedplates, ties and other material specialised for jointing or fixing rails 2,580 N/A 2,580 2,838 3,096 3,354   7303 Tubes, pipes and hollow profiles, of cast iron see below see below see below see below see below see below   7303 00 Tubes, pipes and hollow profiles, of cast iron 1,640 N/A 1,640 1,804 1,968 2,132   7304 Tubes, pipes and hollow profiles, seamless, of iron or steel (excl. products of cast iron) see below see below see below see below see below see below   7304 11 00 Line pipe of a kind used for oil or gas pipelines, seamless, of stainless steel 2,910 N/A 2,910 3,201 3,492 3,783   7304 19 Line pipe of a kind used for oil or gas pipelines, seamless, of iron or steel (excl. products of stainless steel or of cast iron) 1,560 N/A 1,560 1,716 1,872 2,028   7304 22 00 Drill pipe, seamless, of stainless steel, of a kind used in drilling for oil or gas 2,910 N/A 2,910 3,201 3,492 3,783   7304 23 00 Drill pipe, seamless, of a kind used in drilling for oil or gas, of iron or steel (excl. products of stainless steel or of cast iron) 1,560 N/A 1,560 1,716 1,872 2,028   7304 24 00 Casing and tubing, seamless, of a kind used for drilling for oil or gas, of stainless steel 2,910 N/A 2,910 3,201 3,492 3,783   7304 29 Casing and tubing, seamless, of iron or steel, of a kind used in drilling for oil or gas (excl. products of cast iron) 1,560 N/A 1,560 1,716 1,872 2,028   7304 31 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" (excl. cast iron products and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used for drilling for oil or gas) 1,560 N/A 1,560 1,716 1,872 2,028   7304 39 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, not cold-drawn or cold-rolled "cold-reduced" (excl. cast iron products, line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas) 1,560 N/A 1,560 1,716 1,872 2,028   7304 41 00 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas) 2,910 N/A 2,910 3,201 3,492 3,783   7304 49 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines or of a kind used for drilling for oil or gas) 2,910 N/A 2,910 3,201 3,492 3,783   7304 51 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil) 1,570 N/A 1,570 1,727 1,884 2,041   7304 59 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil) 1,570 N/A 1,570 1,727 1,884 2,041   7304 90 00 Tubes, pipes and hollow profiles, seamless, of non-circular cross-section, of iron or steel (excl. products of cast iron) 1,560 N/A 1,560 1,716 1,872 2,028   7305 Tubes and pipes, having circular cross-sections and an external diameter of > 406,4 mm, of flat-rolled products of iron or steel "e.g., welded, riveted or similarly closed" 1,570 N/A 1,570 1,727 1,884 2,041   7306 Tubes, pipes and hollow profiles "e.g., open seam or welded, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless tubes and pipes and tubes having internal and external circular cross-sections and an external diameter of > 406,4 mm) see below see below see below see below see below see below   7306 11 00 Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm 2,910 N/A 2,910 3,201 3,492 3,783   7306 19 00 Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron) 1,898 N/A 1,898 2,088 2,278 2,467   7306 21 00 Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm 2,910 N/A 2,910 3,201 3,492 3,783   7306 29 00 Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron) 1,898 N/A 1,898 2,088 2,278 2,467   7306 30 12 Precision tubes, welded, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" 1,898 N/A 1,898 2,088 2,278 2,467   7306 30 18 Precision tubes, welded, of circular cross-section, of iron or non-alloy steel (excl. cold-drawn or cold-rolled) 1,898 N/A 1,898 2,088 2,278 2,467   7306 30 41 Threaded or threadable tubes "gas pipe", welded, of circular cross-section, of iron or non-alloy steel, plated or coated with zinc 1,898 N/A 1,898 2,088 2,278 2,467   7306 30 49 Threaded or threadable tubes "gas pipe", welded, of circular cross-section, of iron or non-alloy steel (excl. products plated or coated with zinc) 1,898 N/A 1,898 2,088 2,278 2,467   7306 30 72 Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel, of an external diameter of <= 168,3 mm, plated or coated with zinc (excl. line pipe of a kind used for oil or gas pipelines or casing and tubingof a kind used in drilling for oil or gas) 1,898 N/A 1,898 2,088 2,278 2,467   7306 30 77 Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel of an external diameter of <= 168,3 mm (excl. plated or coated with zinc and line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used in drilling for oil or gas, precision tubes and threaded or threadable tubes "gas pipe") 1,898 N/A 1,898 2,088 2,278 2,467   7306 30 80 Tubes, pipes and hollow profiles, welded, having a circular cross-section, of iron or steel, of an external diameter of > 168,3 mm but <= 406,4 mm (excl. line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, or precision steel tubes, electrical conduit tubes or threaded or threadable tubes "gas pipe") 1,898 N/A 1,898 2,088 2,278 2,467   7306 40 20 Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. products having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) 2,910 N/A 2,910 3,201 3,492 3,783   7306 40 80 Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel (excl. products cold-drawn or cold-rolled "cold-reduced", tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) 2,910 N/A 2,910 3,201 3,492 3,783   7306 50 21 Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" 1,898 N/A 1,898 2,088 2,278 2,467   7306 50 29 Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless (excl. cold-drawn or cold-rolled) 1,898 N/A 1,898 2,088 2,278 2,467   7306 50 80 Tubes, pipes and hollow profiles, welded, of circular cross-section, of alloy steel other than stainless (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and precision steel tubes) 1,898 N/A 1,898 2,088 2,278 2,467   7306 61 10 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel 2,910 N/A 2,910 3,201 3,492 3,783   7306 61 92 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of <= 2 mm 1,898 N/A 1,898 2,088 2,278 2,467   7306 61 99 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of > 2 mm 1,898 N/A 1,898 2,088 2,278 2,467   7306 69 10 Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) 2,910 N/A 2,910 3,201 3,492 3,783   7306 69 90 Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of iron or steel other than stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) 1,898 N/A 1,898 2,088 2,278 2,467   7306 90 00 Tubes, pipes and hollow profiles "e.g., open seam, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless or welded tubes and pipes and tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm) 1,898 N/A 1,898 2,088 2,278 2,467   7307 Tube or pipe fittings "e.g. couplings, elbows, sleeves", of iron or steel see below see below see below see below see below see below   7307 11 Tube or pipe fittings of non-malleable cast iron 1,630 N/A 1,630 1,793 1,956 2,119   7307 19 10 Tube or pipe fittings of cast iron (excl. of non-malleable) 1,630 N/A 1,630 1,793 1,956 2,119   7307 19 90 Cast tube or pipe fittings of steel 1,510 N/A 1,510 1,661 1,812 1,963   7307 21 00 Flanges of stainless steel (excl. cast products) 2,630 N/A 2,630 2,893 3,156 3,419   7307 22 Threaded elbows, bends and sleeves of stainless steel (excl. cast products) 2,630 N/A 2,630 2,893 3,156 3,419   7307 23 Butt welding tube or pipe fittings of stainless steel (excl. cast products) 2,630 N/A 2,630 2,893 3,156 3,419   7307 29 Tube or pipe fittings of stainless steel (excl. cast products, flanges, threaded elbows, bends and sleeves and butt weldings fittings) 2,630 N/A 2,630 2,893 3,156 3,419   7307 91 00 Flanges of iron or steel (excl. cast or stainless products) 1,530 N/A 1,530 1,683 1,836 1,989   7307 92 Threaded elbows, bends and sleeves, of stainless steel (excl. cast or stainless products) 1,530 N/A 1,530 1,683 1,836 1,989   7307 93 Butt welding fittings of iron or steel (excl. cast iron or stainless steel products, and flanges) 1,530 N/A 1,530 1,683 1,836 1,989   7307 99 Tube or pipe fittings, of iron or steel (excl. cast iron or stainless steel products; flanges; threaded elbows, bends and sleeves; butt welding fittings) 1,530 N/A 1,530 1,683 1,836 1,989   7308 Structures and parts of structures "e.g., bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns", of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel (excl. prefabricated buildings of heading 9406) 2,690 N/A 2,690 2,959 3,228 3,497   7309 Reservoirs, tanks, vats and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of > 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated (excl. containers specifically constructed or equipped for one or more types of transport) 2,900 N/A 2,900 3,190 3,480 3,770   7310 Tanks, casks, drums, cans, boxes and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of <= 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated, n.e.s. 1,580 N/A 1,580 1,738 1,896 2,054   7311 Containers of iron or steel, for compressed or liquefied gas (excl. containers specifically constructed or equipped for one or more types of transport) see below see below see below see below see below see below   7311 00 Containers of iron or steel, for compressed or liquefied gas (excl. containers specifically constructed or equipped for one or more types of transport) 2,900 N/A 2,900 3,190 3,480 3,770   7318 Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers, incl. spring washers, and similar articles, of iron or steel (excl. lag screws, stoppers, plugs and the like, threaded) see below see below see below see below see below see below   7318 11 00 Coach screws of iron or steel 1,530 N/A 1,530 1,683 1,836 1,989   7318 12 10 Wood screws of stainless steel (excl. coach screws) 2,910 N/A 2,910 3,201 3,492 3,783   7318 12 90 Wood screws of iron or steel other than stainless (excl. coach screws) 1,530 N/A 1,530 1,683 1,836 1,989   7318 13 00 Screw hooks and screw rings, of iron or steel 1,530 N/A 1,530 1,683 1,836 1,989   7318 14 10 Self-tapping screws, of stainless steel (excl. wood screws) 2,910 N/A 2,910 3,201 3,492 3,783   7318 14 91 Spaced-thread screws of iron or steel other than stainless 1,530 N/A 1,530 1,683 1,836 1,989   7318 14 99 Self-tapping screws of iron or steel other than stainless (excl. spaced-thread screws and wood screws) 1,530 N/A 1,530 1,683 1,836 1,989   7318 15 Threaded screws and bolts, of iron or steel, whether or not with their nuts and washers (excl. coach screws and other wood screws, screw hooks and screw rings, self-tapping screws, lag screws, stoppers, plugs and the like, threaded) 2,480 N/A 2,480 2,728 2,976 3,224   7318 16 Nuts of iron or steel 2,860 N/A 2,860 3,146 3,432 3,718   7318 19 00 Threaded articles, of iron or steel, n.e.s. 1,530 N/A 1,530 1,683 1,836 1,989   7318 21 00 Spring washers and other lock washers, of iron or steel 1,530 N/A 1,530 1,683 1,836 1,989   7318 22 00 Washers of iron or steel (excl. spring washers and other lock washers) 1,830 N/A 1,830 2,013 2,196 2,379   7318 23 00 Rivets of iron or steel (excl. tubular and bifurcated rivets for particular uses) 1,740 N/A 1,740 1,914 2,088 2,262   7318 24 00 Cotters and cotter pins, of iron or steel 1,530 N/A 1,530 1,683 1,836 1,989   7318 29 00 Non-threaded articles, of iron or steel 1,530 N/A 1,530 1,683 1,836 1,989   7326 Articles of iron or steel, n.e.s. (excl. cast articles) see below see below see below see below see below see below   7326 11 00 Grinding balls and similar articles for mills, of iron or steel, forged or stamped, but not further worked 1,510 N/A 1,510 1,661 1,812 1,963   7326 19 Articles of iron or steel, forged or stamped, but not further worked, n.e.s. (excl. grinding balls and similar articles for mills) 1,510 N/A 1,510 1,661 1,812 1,963   7326 20 00 Articles of iron or steel wire, n.e.s. 1,530 N/A 1,530 1,683 1,836 1,989   7326 90 30 Ladders and steps, of iron or steel 1,530 N/A 1,530 1,683 1,836 1,989   7326 90 40 Pallets and similar platforms for handling goods, of iron or steel 1,530 N/A 1,530 1,683 1,836 1,989   7326 90 50 Reels for cables, piping and the like, of iron or steel 1,530 N/A 1,530 1,683 1,836 1,989   7326 90 60 Ventilators, non-mechanical, guttering, hooks and like articles used in the building industry, n.e.s., of iron or steel 1,530 N/A 1,530 1,683 1,836 1,989   7326 90 92 Articles of iron or steel, open-die forged, n.e.s. 1,510 N/A 1,510 1,661 1,812 1,963   7326 90 94 Articles of iron or steel, closed-die forged, n.e.s. 1,510 N/A 1,510 1,661 1,812 1,963   7326 90 96 Sintered articles of iron or steel, n.e.s. 1,510 N/A 1,510 1,661 1,812 1,963   7326 90 98 Articles of iron or steel, n.e.s. 1,530 N/A 1,530 1,683 1,836 1,989   Oman Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – – – –   2523 10 00 White clinker – – – – – –   2523 10 00 Grey clinker 0,830 0,030 0,860 0,946 1,032 1,118 (A) 2523 21 00 White Portland cement – – – – – –   2523 29 00 Grey Portland cement 0,860 0,060 0,920 1,012 1,104 1,196   2523 90 00 White hydraulic cements – – – – – –   2523 90 00 Grey hydraulic cements – – – – – –   2523 30 00 Aluminous cement – – – – – –   Aluminium         10 % mark-up 20 % mark-up 30 % mark-up   7601 Unwrought aluminium 1,700 N/A 1,700 1,870 2,040 2,210 (K) 7603 Aluminium powders and flakes 1,810 N/A 1,810 1,991 2,172 2,353 (K) 7604 10 10 Bars and rods 2,030 N/A 2,030 2,233 2,436 2,639 (K) 7604 10 90 Profiles 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7604 21 00 Hollow profiles 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7604 29 10 Bars and rods 2,030 N/A 2,030 2,233 2,436 2,639 (K) 7604 29 90 Profiles 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7605 Aluminium wire 2,030 N/A 2,030 2,233 2,436 2,639 (K) 7606 Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7608 Aluminium tubes and pipes 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7609 00 00 Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7610 10 00 Doors, windows and their frames and thresholds for doors 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7610 90 Other 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7610 90 10 Bridges and bridge-sections, towers and lattice masts 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7610 90 90 Other 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7611 00 00 Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7612 Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7613 00 00 Aluminium containers for compressed or liquefied gas 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7614 Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated 2,030 N/A 2,030 2,233 2,436 2,639 (K) 7616 10 00 Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7616 91 00 Cloth, grill, netting and fencing, of aluminium wire 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7616 99 10 Cast 1,810 N/A 1,810 1,991 2,172 2,353 (K) 7616 99 90 Other 2,490 N/A 2,490 2,739 2,988 3,237 (K) Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066   Iron and steel         10 % mark-up 20 % mark-up 30 % mark-up   7202 11 Ferro-manganese, containing by weight > 2% of carbon 1,690 N/A 1,690 1,859 2,028 2,197   7202 19 Ferro-manganese, containing by weight <= 2% carbon _ _ _ _ _ _   7202 41 Ferro-chromium, containing by weight > 4% of carbon 2,350 N/A 2,350 2,585 2,820 3,055   7202 49 Ferro-chromium, containing by weight <= 4% of carbon _ _ _ _ _ _   7202 60 00 Ferro-nickel 3,480 N/A 3,480 3,828 4,176 4,524   Pakistan Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – – – –   2523 10 00 White clinker 1,250 0,040 1,290 1,419 1,548 1,677 (B) 2523 10 00 Grey clinker 1,280 0,020 1,300 1,430 1,560 1,690 (A) 2523 21 00 White Portland cement 1,290 0,120 1,410 1,551 1,692 1,833   2523 29 00 Grey Portland cement 1,280 0,050 1,320 1,452 1,584 1,716   2523 90 00 White hydraulic cements – – – – – –   2523 90 00 Grey hydraulic cements – – – – – –   2523 30 00 Aluminous cement – – – – – –   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 1,770 0,040 1,800 1,818 1,818 1,818   2814 10 00 Anhydrous ammonia 2,340 0,120 2,460 2,485 2,485 2,485   2814 20 00 Ammonia in aqueous solution 0,700 0,040 0,740 0,747 0,747 0,747   2834 21 00 Nitrate of potassium 1,610 0,050 1,660 1,677 1,677 1,677   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,520 0,030 0,550 0,556 0,556 0,556   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,860 0,030 0,890 0,899 0,899 0,899   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,560 0,090 1,650 1,667 1,667 1,667   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,530 0,090 1,620 1,636 1,636 1,636   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,680 0,060 0,750 0,758 0,758 0,758   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,160 0,070 1,240 1,252 1,252 1,252   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,220 0,060 1,280 1,293 1,293 1,293   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,880 0,080 1,960 1,980 1,980 1,980   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,620 0,080 1,700 1,717 1,717 1,717   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,620 0,080 1,700 1,717 1,717 1,717   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,760 0,060 2,820 2,848 2,848 2,848   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,580 0,080 1,650 1,667 1,667 1,667   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,340 0,070 1,400 1,414 1,414 1,414   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,480 0,080 1,560 1,576 1,576 1,576   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,700 0,060 0,760 0,768 0,768 0,768   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,820 0,080 0,900 0,909 0,909 0,909   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,560 0,060 0,620 0,626 0,626 0,626   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,550 0,050 0,600 0,606 0,606 0,606   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,350 0,040 0,390 0,394 0,394 0,394   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,120 0,100 1,210 1,222 1,222 1,222   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,630 0,090 0,720 0,727 0,727 0,727   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,080 0,060 1,140 1,151 1,151 1,151   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,560 0,040 0,600 0,606 0,606 0,606   Aluminium         10 % mark-up 20 % mark-up 30 % mark-up   7601 Unwrought aluminium 0,360 N/A 0,360 0,396 0,432 0,468 (L) 7603 Aluminium powders and flakes 1,290 N/A 1,290 1,419 1,548 1,677 (L) 7604 10 10 Bars and rods 1,520 N/A 1,520 1,672 1,824 1,976 (L) 7604 10 90 Profiles 1,530 N/A 1,530 1,683 1,836 1,989 (L) 7604 21 00 Hollow profiles 1,530 N/A 1,530 1,683 1,836 1,989 (L) 7604 29 10 Bars and rods 1,520 N/A 1,520 1,672 1,824 1,976 (L) 7604 29 90 Profiles 1,530 N/A 1,530 1,683 1,836 1,989 (L) 7605 Aluminium wire 1,520 N/A 1,520 1,672 1,824 1,976 (L) 7606 Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm 1,970 N/A 1,970 2,167 2,364 2,561 (L) 7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm 1,970 N/A 1,970 2,167 2,364 2,561 (L) 7608 Aluminium tubes and pipes 1,530 N/A 1,530 1,683 1,836 1,989 (L) 7609 00 00 Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) 1,530 N/A 1,530 1,683 1,836 1,989 (L) 7610 10 00 Doors, windows and their frames and thresholds for doors 1,530 N/A 1,530 1,683 1,836 1,989 (L) 7610 90 Other 1,530 N/A 1,530 1,683 1,836 1,989 (L) 7610 90 10 Bridges and bridge-sections, towers and lattice masts 1,530 N/A 1,530 1,683 1,836 1,989 (L) 7610 90 90 Other 1,530 N/A 1,530 1,683 1,836 1,989 (L) 7611 00 00 Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 1,970 N/A 1,970 2,167 2,364 2,561 (L) 7612 Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 1,970 N/A 1,970 2,167 2,364 2,561 (L) 7613 00 00 Aluminium containers for compressed or liquefied gas 1,970 N/A 1,970 2,167 2,364 2,561 (L) 7614 Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated 1,520 N/A 1,520 1,672 1,824 1,976 (L) 7616 10 00 Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles 1,970 N/A 1,970 2,167 2,364 2,561 (L) 7616 91 00 Cloth, grill, netting and fencing, of aluminium wire 1,970 N/A 1,970 2,167 2,364 2,561 (L) 7616 99 10 Cast 1,290 N/A 1,290 1,419 1,548 1,677 (L) 7616 99 90 Other 1,970 N/A 1,970 2,167 2,364 2,561 (L) Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066   Iron and steel         10 % mark-up 20 % mark-up 30 % mark-up   7202 11 Ferro-manganese, containing by weight > 2% of carbon 1,690 N/A 1,690 1,859 2,028 2,197   7202 19 Ferro-manganese, containing by weight <= 2% carbon _ _ _ _ _ _   7202 41 Ferro-chromium, containing by weight > 4% of carbon 2,350 N/A 2,350 2,585 2,820 3,055   7202 49 Ferro-chromium, containing by weight <= 4% of carbon _ _ _ _ _ _   7202 60 00 Ferro-nickel 3,480 N/A 3,480 3,828 4,176 4,524   Papua New Guinea Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066   Panama Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – – – –   2523 10 00 White clinker – – – – – –   2523 10 00 Grey clinker 0,870 0,020 0,890 0,979 1,068 1,157 (A) 2523 21 00 White Portland cement 1,220 0,130 1,350 1,485 1,620 1,755   2523 29 00 Grey Portland cement 0,890 0,040 0,940 1,034 1,128 1,222   2523 90 00 White hydraulic cements – – – – – –   2523 90 00 Grey hydraulic cements – – – – – –   2523 30 00 Aluminous cement – – – – – –   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 1,830 0,030 1,860 1,879 1,879 1,879   2814 10 00 Anhydrous ammonia – – – – – –   2814 20 00 Ammonia in aqueous solution 0,680 0,030 0,710 0,717 0,717 0,717   2834 21 00 Nitrate of potassium 1,600 0,040 1,640 1,656 1,656 1,656   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,430 0,020 0,450 0,455 0,455 0,455   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,710 0,020 0,730 0,737 0,737 0,737   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,280 0,060 1,350 1,364 1,364 1,364   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,260 0,060 1,320 1,333 1,333 1,333   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,580 0,030 0,610 0,616 0,616 0,616   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,090 0,040 1,120 1,131 1,131 1,131   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,190 0,030 1,220 1,232 1,232 1,232   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,840 0,050 1,880 1,899 1,899 1,899   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,540 0,040 1,580 1,596 1,596 1,596   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,540 0,040 1,580 1,596 1,596 1,596   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,850 0,050 2,900 2,929 2,929 2,929   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,540 0,040 1,580 1,596 1,596 1,596   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,240 0,040 1,280 1,293 1,293 1,293   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,310 0,050 1,360 1,374 1,374 1,374   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,630 0,020 0,650 0,657 0,657 0,657   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,760 0,020 0,780 0,788 0,788 0,788   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,500 0,010 0,520 0,525 0,525 0,525   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,500 0,020 0,520 0,525 0,525 0,525   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,300 0,010 0,320 0,323 0,323 0,323   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,040 0,030 1,070 1,081 1,081 1,081   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,520 0,020 0,540 0,545 0,545 0,545   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,040 0,030 1,070 1,081 1,081 1,081   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,520 0,010 0,540 0,545 0,545 0,545   Paraguay Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – – – –   2523 10 00 White clinker – – – – – –   2523 10 00 Grey clinker 0,910 0 0,910 1,001 1,092 1,183 (A) 2523 21 00 White Portland cement – – – – – –   2523 29 00 Grey Portland cement 0,910 0 0,910 1,001 1,092 1,183   2523 90 00 White hydraulic cements – – – – – –   2523 90 00 Grey hydraulic cements – – – – – –   2523 30 00 Aluminous cement – – – – – –   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 1,910 0,020 1,930 1,949 1,949 1,949   2814 10 00 Anhydrous ammonia – – – – – –   2814 20 00 Ammonia in aqueous solution 0,690 0,030 0,710 0,717 0,717 0,717   2834 21 00 Nitrate of potassium 1,660 0,030 1,690 1,707 1,707 1,707   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,430 0,020 0,450 0,455 0,455 0,455   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,720 0,020 0,730 0,737 0,737 0,737   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,300 0,050 1,350 1,364 1,364 1,364   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,270 0,050 1,320 1,333 1,333 1,333   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,590 0,020 0,610 0,616 0,616 0,616   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,120 0,030 1,150 1,162 1,162 1,162   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,240 0,020 1,260 1,273 1,273 1,273   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,910 0,040 1,940 1,959 1,959 1,959   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,590 0,030 1,620 1,636 1,636 1,636   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,590 0,030 1,620 1,636 1,636 1,636   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,980 0,040 3,020 3,050 3,050 3,050   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,590 0,030 1,620 1,636 1,636 1,636   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,280 0,030 1,310 1,323 1,323 1,323   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,340 0,040 1,380 1,394 1,394 1,394   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,650 0,020 0,670 0,677 0,677 0,677   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,780 0,020 0,800 0,808 0,808 0,808   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,520 0,010 0,530 0,535 0,535 0,535   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,500 0,020 0,520 0,525 0,525 0,525   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,310 0,010 0,320 0,323 0,323 0,323   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,080 0,020 1,100 1,111 1,111 1,111   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,520 0,020 0,540 0,545 0,545 0,545   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,080 0,020 1,100 1,111 1,111 1,111   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,540 0,010 0,550 0,556 0,556 0,556   Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066   Peru Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay 0,230 0,050 0,280 0,308 0,336 0,364 (A) 2523 10 00 White clinker 1,290 0,020 1,310 1,441 1,572 1,703 (B) 2523 10 00 Grey clinker 1,090 0,020 1,110 1,221 1,332 1,443 (A) 2523 21 00 White Portland cement 1,250 0,110 1,360 1,496 1,632 1,768   2523 29 00 Grey Portland cement 1,070 0,030 1,110 1,221 1,332 1,443   2523 90 00 White hydraulic cements 1,280 0,130 1,410 1,551 1,692 1,833 (B) 2523 90 00 Grey hydraulic cements 1,020 0,040 1,060 1,166 1,272 1,378 (A) 2523 30 00 Aluminous cement – – – – – –   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 1,900 0,020 1,920 1,939 1,939 1,939   2814 10 00 Anhydrous ammonia 2,260 0,060 2,330 2,353 2,353 2,353   2814 20 00 Ammonia in aqueous solution 0,680 0,020 0,700 0,707 0,707 0,707   2834 21 00 Nitrate of potassium 1,680 0,030 1,710 1,727 1,727 1,727   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,510 0,020 0,520 0,525 0,525 0,525   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,840 0,020 0,860 0,869 0,869 0,869   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,530 0,050 1,580 1,596 1,596 1,596   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,500 0,050 1,540 1,555 1,555 1,555   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,660 0,040 0,700 0,707 0,707 0,707   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,190 0,040 1,230 1,242 1,242 1,242   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,280 0,030 1,310 1,323 1,323 1,323   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,960 0,050 2,010 2,030 2,030 2,030   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,700 0,040 1,740 1,757 1,757 1,757   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,700 0,040 1,740 1,757 1,757 1,757   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,960 0,030 3 3,030 3,030 3,030   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,650 0,040 1,690 1,707 1,707 1,707   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,360 0,040 1,400 1,414 1,414 1,414   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,490 0,040 1,540 1,555 1,555 1,555   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,700 0,040 0,740 0,747 0,747 0,747   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,850 0,040 0,900 0,909 0,909 0,909   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,580 0,030 0,610 0,616 0,616 0,616   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,530 0,030 0,560 0,566 0,566 0,566   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,340 0,020 0,360 0,364 0,364 0,364   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,160 0,050 1,210 1,222 1,222 1,222   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,610 0,060 0,680 0,687 0,687 0,687   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,130 0,030 1,160 1,172 1,172 1,172   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,580 0,020 0,600 0,606 0,606 0,606   Aluminium         10 % mark-up 20 % mark-up 30 % mark-up   7601 Unwrought aluminium 0,360 N/A 0,360 0,396 0,432 0,468 (L) 7603 Aluminium powders and flakes 1,840 N/A 1,840 2,024 2,208 2,392 (L) 7604 10 10 Bars and rods 2,060 N/A 2,060 2,266 2,472 2,678 (L) 7604 10 90 Profiles 2,080 N/A 2,080 2,288 2,496 2,704 (L) 7604 21 00 Hollow profiles 2,080 N/A 2,080 2,288 2,496 2,704 (L) 7604 29 10 Bars and rods 2,060 N/A 2,060 2,266 2,472 2,678 (L) 7604 29 90 Profiles 2,080 N/A 2,080 2,288 2,496 2,704 (L) 7605 Aluminium wire 2,060 N/A 2,060 2,266 2,472 2,678 (L) 7606 Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm 2,520 N/A 2,520 2,772 3,024 3,276 (L) 7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm 2,520 N/A 2,520 2,772 3,024 3,276 (L) 7608 Aluminium tubes and pipes 2,080 N/A 2,080 2,288 2,496 2,704 (L) 7609 00 00 Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) 2,080 N/A 2,080 2,288 2,496 2,704 (L) 7610 10 00 Doors, windows and their frames and thresholds for doors 2,080 N/A 2,080 2,288 2,496 2,704 (L) 7610 90 Other 2,080 N/A 2,080 2,288 2,496 2,704 (L) 7610 90 10 Bridges and bridge-sections, towers and lattice masts 2,080 N/A 2,080 2,288 2,496 2,704 (L) 7610 90 90 Other 2,080 N/A 2,080 2,288 2,496 2,704 (L) 7611 00 00 Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 2,520 N/A 2,520 2,772 3,024 3,276 (L) 7612 Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 2,520 N/A 2,520 2,772 3,024 3,276 (L) 7613 00 00 Aluminium containers for compressed or liquefied gas 2,520 N/A 2,520 2,772 3,024 3,276 (L) 7614 Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated 2,060 N/A 2,060 2,266 2,472 2,678 (L) 7616 10 00 Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles 2,520 N/A 2,520 2,772 3,024 3,276 (L) 7616 91 00 Cloth, grill, netting and fencing, of aluminium wire 2,520 N/A 2,520 2,772 3,024 3,276 (L) 7616 99 10 Cast 1,840 N/A 1,840 2,024 2,208 2,392 (L) 7616 99 90 Other 2,520 N/A 2,520 2,772 3,024 3,276 (L) Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066   Philippines Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – – – –   2523 10 00 White clinker – – – – – –   2523 10 00 Grey clinker 1,330 0,050 1,380 1,518 1,656 1,794 (A) 2523 21 00 White Portland cement – – – – – –   2523 29 00 Grey Portland cement 1,270 0,090 1,360 1,496 1,632 1,768   2523 90 00 White hydraulic cements – – – – – –   2523 90 00 Grey hydraulic cements 1,210 0,090 1,300 1,430 1,560 1,690 (A) 2523 30 00 Aluminous cement – – – – – –   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 2,180 0,060 2,250 2,273 2,273 2,273   2814 10 00 Anhydrous ammonia 2,130 0,200 2,330 2,353 2,353 2,353   2814 20 00 Ammonia in aqueous solution 0,640 0,060 0,700 0,707 0,707 0,707   2834 21 00 Nitrate of potassium 1,840 0,100 1,940 1,959 1,959 1,959   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,480 0,050 0,530 0,535 0,535 0,535   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,800 0,050 0,850 0,859 0,859 0,859   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,450 0,160 1,610 1,626 1,626 1,626   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,420 0,150 1,570 1,586 1,586 1,586   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,630 0,120 0,740 0,747 0,747 0,747   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,240 0,130 1,370 1,384 1,384 1,384   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,400 0,100 1,500 1,515 1,515 1,515   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,150 0,150 2,300 2,323 2,323 2,323   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,850 0,140 1,990 2,010 2,010 2,010   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,850 0,140 1,990 2,010 2,010 2,010   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 3,410 0,100 3,510 3,545 3,545 3,545   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,800 0,130 1,940 1,959 1,959 1,959   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,420 0,120 1,540 1,555 1,555 1,555   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,510 0,140 1,650 1,667 1,667 1,667   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,730 0,120 0,850 0,859 0,859 0,859   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,920 0,140 1,060 1,071 1,071 1,071   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,620 0,110 0,730 0,737 0,737 0,737   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,500 0,090 0,590 0,596 0,596 0,596   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,320 0,070 0,390 0,394 0,394 0,394   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,260 0,180 1,440 1,454 1,454 1,454   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,580 0,130 0,710 0,717 0,717 0,717   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,220 0,110 1,330 1,343 1,343 1,343   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,630 0,080 0,700 0,707 0,707 0,707   Aluminium         10 % mark-up 20 % mark-up 30 % mark-up   7601 Unwrought aluminium 0,360 N/A 0,360 0,396 0,432 0,468 (L) 7603 Aluminium powders and flakes 0,490 N/A 0,490 0,539 0,588 0,637 (L) 7604 10 10 Bars and rods 0,710 N/A 0,710 0,781 0,852 0,923 (L) 7604 10 90 Profiles 0,730 N/A 0,730 0,803 0,876 0,949 (L) 7604 21 00 Hollow profiles 0,730 N/A 0,730 0,803 0,876 0,949 (L) 7604 29 10 Bars and rods 0,710 N/A 0,710 0,781 0,852 0,923 (L) 7604 29 90 Profiles 0,730 N/A 0,730 0,803 0,876 0,949 (L) 7605 Aluminium wire 0,710 N/A 0,710 0,781 0,852 0,923 (L) 7606 Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm 1,170 N/A 1,170 1,287 1,404 1,521 (L) 7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm 1,170 N/A 1,170 1,287 1,404 1,521 (L) 7608 Aluminium tubes and pipes 0,730 N/A 0,730 0,803 0,876 0,949 (L) 7609 00 00 Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) 0,730 N/A 0,730 0,803 0,876 0,949 (L) 7610 10 00 Doors, windows and their frames and thresholds for doors 0,730 N/A 0,730 0,803 0,876 0,949 (L) 7610 90 Other 0,730 N/A 0,730 0,803 0,876 0,949 (L) 7610 90 10 Bridges and bridge-sections, towers and lattice masts 0,730 N/A 0,730 0,803 0,876 0,949 (L) 7610 90 90 Other 0,730 N/A 0,730 0,803 0,876 0,949 (L) 7611 00 00 Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 1,170 N/A 1,170 1,287 1,404 1,521 (L) 7612 Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 1,170 N/A 1,170 1,287 1,404 1,521 (L) 7613 00 00 Aluminium containers for compressed or liquefied gas 1,170 N/A 1,170 1,287 1,404 1,521 (L) 7614 Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated 0,710 N/A 0,710 0,781 0,852 0,923 (L) 7616 10 00 Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles 1,170 N/A 1,170 1,287 1,404 1,521 (L) 7616 91 00 Cloth, grill, netting and fencing, of aluminium wire 1,170 N/A 1,170 1,287 1,404 1,521 (L) 7616 99 10 Cast 0,490 N/A 0,490 0,539 0,588 0,637 (L) 7616 99 90 Other 1,170 N/A 1,170 1,287 1,404 1,521 (L) Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 14,030 N/A 14,030 15,433 16,836 18,239   Iron and steel         10 % mark-up 20 % mark-up 30 % mark-up   2601 12 00 Agglomerated iron ores and concentrates (excl. roasted iron pyrites) 0,120 0,070 0,190 0,209 0,228 0,247   7201 Pig iron and spiegeleisen, in pigs, blocks or other primary forms – N/A – – – –   7202 11 Ferro-manganese, containing by weight > 2% of carbon 1,690 N/A 1,690 1,859 2,028 2,197   7202 19 Ferro-manganese, containing by weight <= 2% carbon – N/A – – – –   7202 41 Ferro-chromium, containing by weight > 4% of carbon – N/A – – – –   7202 49 Ferro-chromium, containing by weight <= 4% of carbon – N/A – – – –   7202 60 00 Ferro-nickel – N/A – – – –   7203 Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99,94%, in lumps, pellets or similar forms – N/A – – – –   7205 Granules and powders of pig iron, spiegeleisen, iron or steel (excl. granules and powders of ferro-alloys, turnings and filings of iron or steel, radioactive iron powders "isotopes" and certain low-calibre, substandard balls for ballbearings) 1,650 N/A 1,650 1,815 1,980 2,145 (E) 7206 Iron and non-alloy steel in ingots or other primary forms (excl. remelting scrap ingots, products obtained by continuous casting and iron of heading 7203) see below N/A see below see below see below see below   7206 10 00 Ingots, of iron and non-alloy steel (excl. remelted scrap ingots, continuous cast products, iron of heading 7203) 0,740 N/A 0,740 0,814 0,888 0,962 (E) 7206 90 00 Iron and non-alloy steel, in puddled bars or other primary forms (excl. ingots, remelted scrap ingots, continuous cast products, iron of heading 7203) 0,740 N/A 0,740 0,814 0,888 0,962 (E) 7207 Semi-finished products of iron or non-alloy steel see below N/A see below see below see below see below   7207 11 11 Semi-finished products, of non-alloy free-cutting steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting 0,740 N/A 0,740 0,814 0,888 0,962 (E) 7207 11 14 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness of <= 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel) 0,740 N/A 0,740 0,814 0,888 0,962 (E) 7207 11 16 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness of > 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel) 0,740 N/A 0,740 0,814 0,888 0,962 (E) 7207 11 90 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular cross-section, the width < twice the thickness, forged 0,740 N/A 0,740 0,814 0,888 0,962 (E) 7207 12 10 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtained by continuous casting 0,740 N/A 0,740 0,814 0,888 0,962 (E) 7207 12 90 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular "other than square" cross-section, the width >= twice the thickness, forged 0,740 N/A 0,740 0,814 0,888 0,962 (E) 7207 19 12 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting 0,740 N/A 0,740 0,814 0,888 0,962 (E) 7207 19 19 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, forged 0,740 N/A 0,740 0,814 0,888 0,962 (E) 7207 19 80 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon (excl. semi-products, of square, rectangular, circular or polygonal cross-section) 0,740 N/A 0,740 0,814 0,888 0,962 (E) 7207 20 11 Semi-finished products, of non-alloy free-cutting steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting 0,740 N/A 0,740 0,814 0,888 0,962 (E) 7207 20 15 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% but < 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel) 0,740 N/A 0,740 0,814 0,888 0,962 (E) 7207 20 17 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel) 0,740 N/A 0,740 0,814 0,888 0,962 (E) 7207 20 19 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, forged 0,740 N/A 0,740 0,814 0,888 0,962 (E) 7207 20 32 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtained by continuous casting 0,740 N/A 0,740 0,814 0,888 0,962 (E) 7207 20 39 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of rectangular "other than square" cross-section and the width >= twice the thickness, forged 0,740 N/A 0,740 0,814 0,888 0,962 (E) 7207 20 52 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting 0,740 N/A 0,740 0,814 0,888 0,962 (E) 7207 20 59 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of circular or polygonal cross-section, forged 0,740 N/A 0,740 0,814 0,888 0,962 (E) 7207 20 80 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon (excl. those of square, rectangular, circular or polygonal cross-section) 0,740 N/A 0,740 0,814 0,888 0,962 (E) 7208 Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled, not clad, plated or coated 0,740 N/A 0,740 0,814 0,888 0,962 (E) 7209 Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, cold-rolled "cold-reduced", not clad, plated or coated 0,740 N/A 0,740 0,814 0,888 0,962 (E) 7210 Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated 0,740 N/A 0,740 0,814 0,888 0,962 (E) 7211 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", not clad, plated or coated see below N/A see below see below see below see below   7211 13 00 Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as "wide flats" 0,740 N/A 0,740 0,814 0,888 0,962 (E) 7211 14 00 Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, not further worked than hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm (excl. "wide flats") 0,740 N/A 0,740 0,814 0,888 0,962 (E) 7211 19 00 Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, simply hot-rolled, not clad, plated or coated, of a thickness < 4,75 mm (excl. "wide flats") 0,740 N/A 0,740 0,814 0,888 0,962 (E) 7211 23 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight < 0,25% of carbon 0,740 N/A 0,740 0,814 0,888 0,962 (E) 7211 29 00 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight >= 0,25% of carbon 0,740 N/A 0,740 0,814 0,888 0,962 (E) 7211 90 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked, but not clad, plated or coated 0,740 N/A 0,740 0,814 0,888 0,962 (E) 7212 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated 0,740 N/A 0,740 0,814 0,888 0,962 (E) 7213 Bars and rods of iron or non-alloy steel, hot-rolled, in irregularly wound coils 0,740 N/A 0,740 0,814 0,888 0,962 (E) 7214 Bars and rods, of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but incl. those twisted after rolling (excl. in irregularly wound coils) see below N/A see below see below see below see below   7214 10 00 Bars and rods, of iron or non-alloy steel, not further worked than forged (excl. in irregularly wound coils) 0,740 N/A 0,740 0,814 0,888 0,962 (E) 7214 20 00 Bars and rods, of iron or non-alloy steel, with indentations, ribs, groves or other deformations produced during the rolling process 0,740 N/A 0,740 0,814 0,888 0,962 (E) 7214 30 00 Bars and rods, of non-alloy free-cutting steel, not further worked than hot-rolled, hot-drawn or hot-extruded (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling) 0,740 N/A 0,740 0,814 0,888 0,962 (E) 7214 91 Bars and rods, of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, of rectangular "other than square" cross-section (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process, bars and rods twisted after rolling and free-cutting steel) 0,740 N/A 0,740 0,814 0,888 0,962 (E) 7214 99 Bars and rods, of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded (excl. of rectangular [other than square] cross-section and those containing indentations, ribs, grooves or other deformations produced during the rolling process, and of non-alloy free-cutting steel) 0,740 N/A 0,740 0,814 0,888 0,962 (E) 7215 Bars and rods, of iron or non-alloy steel, cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked, n.e.s. 0,740 N/A 0,740 0,814 0,888 0,962 (E) 7216 Angles, shapes and sections of iron or non-alloy steel, n.e.s. 0,740 N/A 0,740 0,814 0,888 0,962 (E) 7217 Wire of iron or non-alloy steel, in coils (excl. bars and rods) see below N/A see below see below see below see below   7217 10 Wire of iron or non-alloy steel, in coils, not plated or coated, whether or not polished (excl. bars and rods) 0,740 N/A 0,740 0,814 0,888 0,962 (E) 7217 20 Wire of iron or non-alloy steel, in coils, plated or coated with zinc (excl. bars and rods) 0,740 N/A 0,740 0,814 0,888 0,962 (E) 7217 30 Wire of iron or non-alloy steel, in coils, plated or coated with base metals (excl. plated or coated with zinc, and bars and rods) 0,740 N/A 0,740 0,814 0,888 0,962 (E) 7217 90 Wire of iron or non-alloy steel, in coils, plated or coated (excl. plated or coated with base metals, and bars and rods) 0,740 N/A 0,740 0,814 0,888 0,962 (E) 7218 Stainless steel in ingots or other primary forms (excl. remelting scrap ingots and products obtained by continuous casting); semi-finished products of stainless steel see below N/A see below see below see below see below   7218 10 00 Steel, stainless, in ingots and other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) 2,920 N/A 2,920 3,212 3,504 3,796   7218 91 Semi-finished products of stainless steel, of rectangular "other than square" cross-section 2,920 N/A 2,920 3,212 3,504 3,796   7218 99 11 Semi-finished products of stainless steel, of square cross-section, rolled or obtained by continuous casting 2,920 N/A 2,920 3,212 3,504 3,796   7218 99 19 Semi-finished products of stainless steel, of square cross-section, forged 2,920 N/A 2,920 3,212 3,504 3,796   7218 99 20 Semi-finished products of stainless steel, of circular cross-section or of cross-section other than square or rectangular, rolled or obtained by continuous casting 2,920 N/A 2,920 3,212 3,504 3,796   7218 99 80 Semi-finished products of stainless steel, forged (excl. products of square or rectangular cross-section) 2,920 N/A 2,920 3,212 3,504 3,796   7219 Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" see below N/A see below see below see below see below   7219 11 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of > 10 mm 2,920 N/A 2,920 3,212 3,504 3,796   7219 12 Flat-rolled products of stainless steel, of a width of>= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 4,7 mm and <= 10 mm 2,920 N/A 2,920 3,212 3,504 3,796   7219 13 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 3 mm and < 4,75 mm 2,920 N/A 2,920 3,212 3,504 3,796   7219 14 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of < 3 mm 2,920 N/A 2,920 3,212 3,504 3,796   7219 21 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of > 10 mm 2,920 N/A 2,920 3,212 3,504 3,796   7219 22 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 4,75 mm and <= 10 mm 2,920 N/A 2,920 3,212 3,504 3,796   7219 23 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 3 mm and < 4,75 mm 2,920 N/A 2,920 3,212 3,504 3,796   7219 24 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of < 3 mm 2,920 N/A 2,920 3,212 3,504 3,796   7219 31 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 4,75 mm 2,920 N/A 2,920 3,212 3,504 3,796   7219 32 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 3 mm but < 4,75 mm 2,920 N/A 2,920 3,212 3,504 3,796   7219 33 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of > 1 mm but < 3 mm 2,920 N/A 2,920 3,212 3,504 3,796   7219 34 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 0,5 mm but <= 1 mm 2,920 N/A 2,920 3,212 3,504 3,796   7219 35 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of < 0,5 mm 2,920 N/A 2,920 3,212 3,504 3,796   7219 90 Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked 2,920 N/A 2,920 3,212 3,504 3,796   7220 Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" see below N/A see below see below see below see below   7220 11 00 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of >= 4,75 mm 2,920 N/A 2,920 3,212 3,504 3,796   7220 12 00 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of < 4,75 mm 2,920 N/A 2,920 3,212 3,504 3,796   7220 20 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" 2,920 N/A 2,920 3,212 3,504 3,796   7220 90 Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked 2,920 N/A 2,920 3,212 3,504 3,796   7221 Bars and rods of stainless steel, hot-rolled, in irregularly wound coils 2,930 N/A 2,930 3,223 3,516 3,809   7222 Other bars and rods of stainless steel; angles, shapes and sections of stainless steel, n.e.s. see below N/A see below see below see below see below   7222 11 Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only hot-extruded, of circular cross-section 2,930 N/A 2,930 3,223 3,516 3,809   7222 19 Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only extruded (excl. of circular cross-section) 2,930 N/A 2,930 3,223 3,516 3,809   7222 20 Other bars and rods of stainless steel, not further worked than cold-formed or cold-finished 2,930 N/A 2,930 3,223 3,516 3,809   7222 30 Other bars and rods of stainless steel, cold-formed or cold-finished and further worked, or not further worked than forged, or forged, or hot-formed by other means and further worked, n.e.s. 2,920 N/A 2,920 3,212 3,504 3,796   7222 40 Angles, shapes and sections of stainless steel, n.e.s. 2,930 N/A 2,930 3,223 3,516 3,809   7223 Wire of stainless steel, in coils (excl. bars and rods) see below N/A see below see below see below see below   7223 00 Wire of stainless steel, in coils (excl. bars and rods) 2,930 N/A 2,930 3,223 3,516 3,809   7224 Steel, alloy, other than stainless, in ingots or other primary forms, semi-finished products of alloy steel other than stainless (excl. waste and scrap in ingot form, and products obtained by continuous casting) see below N/A see below see below see below see below   7224 10 Steel, alloy, other than stainless, in ingots or other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) 2,650 N/A 2,650 2,915 3,180 3,445 (H) 7224 90 02 Semi-finished products of tool steel 2,650 N/A 2,650 2,915 3,180 3,445 (H) 7224 90 03 Semi-finished products of high-speed steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting the width measuring < twice the thickness 2,650 N/A 2,650 2,915 3,180 3,445 (H) 7224 90 05 Semi-finished products of steel containing by weight <= 0,7% of carbon, 0,5% to 1,2% of manganese, 0,6% to 2,3% of silicon, or of steel containing by weight >= 0,0008% of boron with any other element < the minimum content referred to in Note 1 f to chapter 72, of square or rectangular cross-section, hot rolled or obtained by continuous casting, the width measuring < twice the thickness 2,650 N/A 2,650 2,915 3,180 3,445 (H) 7224 90 07 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring < twice the thickness (excl. of tool steel, high-speed steel and articles of subheading 7224.90.05) 2,650 N/A 2,650 2,915 3,180 3,445 (H) 7224 90 14 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring >= twice the thickness (excl. of tool steel) 2,650 N/A 2,650 2,915 3,180 3,445 (H) 7224 90 18 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, forged (excl. of tool steel) 2,650 N/A 2,650 2,915 3,180 3,445 (H) 7224 90 31 Semi-finished products of steel containing by weight 0,9% to 1,15% carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting 2,650 N/A 2,650 2,915 3,180 3,445 (H) 7224 90 38 Semi-finished products of alloy steel, other than stainless steel, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting (excl. of tool steel and products containing by weight 0,9% to 1,15% of carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum) 2,650 N/A 2,650 2,915 3,180 3,445 (H) 7224 90 90 Semi-finished products of alloy steel, other than stainless steel, forged (excl. of tool steel and products of square or rectangular, circular or polygamol cross-section) 2,650 N/A 2,650 2,915 3,180 3,445 (H) 7225 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" see below N/A see below see below see below see below   7225 11 00 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, grain-oriented 3,950 N/A 3,950 4,345 4,740 5,135 (E) 7225 19 10 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, hot-rolled 2,650 N/A 2,650 2,915 3,180 3,445 (E) 7225 19 90 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, cold-rolled "cold-reduced", non-grain-oriented 2,650 N/A 2,650 2,915 3,180 3,445 (H) 7225 30 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, in coils (excl. products of silicon-electrical steel) 2,650 N/A 2,650 2,915 3,180 3,445 (H) 7225 40 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, not in coils (excl. products of silicon-electrical steel) 2,650 N/A 2,650 2,915 3,180 3,445 (H) 7225 50 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of silicon-electrical steel) 2,650 N/A 2,650 2,915 3,180 3,445 (H) 7225 91 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and electrolytically plated or coated with zinc (excl. products of silicon-electrical steel) 2,650 N/A 2,650 2,915 3,180 3,445 (H) 7225 92 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and plated or coated with zinc (excl. electrolytically plated or coated and products of silicon-electrical steel) 2,650 N/A 2,650 2,915 3,180 3,445 (H) 7225 99 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. plated or coated with zinc and products of silicon-electrical steel) 2,650 N/A 2,650 2,915 3,180 3,445 (H) 7226 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" see below N/A see below see below see below see below   7226 11 00 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", grain-oriented 3,950 N/A 3,950 4,345 4,740 5,135 (E) 7226 19 10 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, not further worked than hot-rolled 2,650 N/A 2,650 2,915 3,180 3,445 (E) 7226 19 80 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, cold-rolled "cold-reduced", whether or not further worked, or hot-rolled and further worked, non-grain-oriented 2,650 N/A 2,650 2,915 3,180 3,445 (H) 7226 20 00 Flat-rolled products of high-speed steel, of a width of <= 600 mm, hot-rolled or cold-rolled "cold-reduced" 2,650 N/A 2,650 2,915 3,180 3,445 (H) 7226 91 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than hot-rolled (excl. products of high-speed steel or silicon-electrical steel) 2,650 N/A 2,650 2,915 3,180 3,445 (H) 7226 92 00 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of high-speed steel or silicon-electrical steel) 2,650 N/A 2,650 2,915 3,180 3,445 (H) 7226 99 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. products of high-speed steel or silicon-electrical steel) 2,650 N/A 2,650 2,915 3,180 3,445 (H) 7227 Bars and rods of alloy steel other than stainless, hot-rolled, in irregularly wound coils 2,660 N/A 2,660 2,926 3,192 3,458 (E)/(H) 7228 Other bars and rods of alloy steel other than stainless, angles, shapes and sections of alloy steel other than stainless, n.e.s.; hollow drill bars and rods, of alloy or non-alloy steel see below N/A see below see below see below see below   7228 10 20 Bars and rods of high-speed steel, not further worked than hot-rolled, hot-drawn or extruded, and hot-rolled, hot-drawn or extruded, not further worked than clad (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 2,660 N/A 2,660 2,926 3,192 3,458 (H) 7228 10 50 Bars and rods of high-speed steel, forged (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 2,650 N/A 2,650 2,915 3,180 3,445 (H) 7228 10 90 Bars and rods of high-speed steel, not further worked than cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked (excl. forged products, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 2,660 N/A 2,660 2,926 3,192 3,458 (H) 7228 20 Bars and rods of silico-manganese steel (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 2,660 N/A 2,660 2,926 3,192 3,458 (H) 7228 30 Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 2,660 N/A 2,660 2,926 3,192 3,458 (E)/(H) 7228 40 Bars and rods of alloy steel other than stainless, not further worked than forged (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 2,650 N/A 2,650 2,915 3,180 3,445 (H) 7228 50 Bars and rods of alloy steel other than stainless, not further worked than cold-formed or cold-finished (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 2,660 N/A 2,660 2,926 3,192 3,458 (E)/(H) 7228 60 Bars and rods of alloy steel other than stainless, cold-formed or cold-finished and further worked or hot-formed and further worked, n.e.s. (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 2,660 N/A 2,660 2,926 3,192 3,458 (H) 7228 70 Angles, shapes and sections of alloy steel other than stainless, n.e.s. 2,660 N/A 2,660 2,926 3,192 3,458 (H) 7228 80 00 Hollow drill bars and rods, of alloy or non-alloy steel 2,660 N/A 2,660 2,926 3,192 3,458 (H) 7229 Wire of alloy steel other than stainless, in coils (excl. bars and rods) 2,660 N/A 2,660 2,926 3,192 3,458 (E)/(H) 7301 Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel 0,790 N/A 0,790 0,869 0,948 1,027 (E) 7302 Railway or tramway track construction material of iron or steel, the following : rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers "cross-ties", fish-plates, chairs, chair wedges, sole plates "base plates", rail clips, bedplates, ties and other material specialised for jointing or fixing rails 2,260 N/A 2,260 2,486 2,712 2,938 (E) 7303 Tubes, pipes and hollow profiles, of cast iron see below N/A see below see below see below see below   7303 00 Tubes, pipes and hollow profiles, of cast iron 1,650 N/A 1,650 1,815 1,980 2,145   7304 Tubes, pipes and hollow profiles, seamless, of iron or steel (excl. products of cast iron) see below N/A see below see below see below see below   7304 11 00 Line pipe of a kind used for oil or gas pipelines, seamless, of stainless steel 2,920 N/A 2,920 3,212 3,504 3,796   7304 19 Line pipe of a kind used for oil or gas pipelines, seamless, of iron or steel (excl. products of stainless steel or of cast iron) 0,830 N/A 0,830 0,913 0,996 1,079 (E) 7304 22 00 Drill pipe, seamless, of stainless steel, of a kind used in drilling for oil or gas 2,920 N/A 2,920 3,212 3,504 3,796   7304 23 00 Drill pipe, seamless, of a kind used in drilling for oil or gas, of iron or steel (excl. products of stainless steel or of cast iron) 0,830 N/A 0,830 0,913 0,996 1,079 (E) 7304 24 00 Casing and tubing, seamless, of a kind used for drilling for oil or gas, of stainless steel 2,920 N/A 2,920 3,212 3,504 3,796   7304 29 Casing and tubing, seamless, of iron or steel, of a kind used in drilling for oil or gas (excl. products of cast iron) 0,830 N/A 0,830 0,913 0,996 1,079 (E) 7304 31 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" (excl. cast iron products and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used for drilling for oil or gas) 0,830 N/A 0,830 0,913 0,996 1,079 (E) 7304 39 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, not cold-drawn or cold-rolled "cold-reduced" (excl. cast iron products, line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas) 0,830 N/A 0,830 0,913 0,996 1,079 (E) 7304 41 00 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas) 2,920 N/A 2,920 3,212 3,504 3,796   7304 49 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines or of a kind used for drilling for oil or gas) 2,920 N/A 2,920 3,212 3,504 3,796   7304 51 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil) 0,830 N/A 0,830 0,913 0,996 1,079 (H) 7304 59 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil) 0,830 N/A 0,830 0,913 0,996 1,079 (E)/(H) 7304 90 00 Tubes, pipes and hollow profiles, seamless, of non-circular cross-section, of iron or steel (excl. products of cast iron) 0,830 N/A 0,830 0,913 0,996 1,079 (E) 7305 Tubes and pipes, having circular cross-sections and an external diameter of > 406,4 mm, of flat-rolled products of iron or steel "e.g., welded, riveted or similarly closed" 0,830 N/A 0,830 0,913 0,996 1,079 (E) 7306 Tubes, pipes and hollow profiles "e.g., open seam or welded, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless tubes and pipes and tubes having internal and external circular cross-sections and an external diameter of > 406,4 mm) see below N/A see below see below see below see below   7306 11 00 Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm 2,920 N/A 2,920 3,212 3,504 3,796   7306 19 00 Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron) 0,830 N/A 0,830 0,913 0,996 1,079 (E) 7306 21 00 Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm 2,920 N/A 2,920 3,212 3,504 3,796   7306 29 00 Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron) 0,830 N/A 0,830 0,913 0,996 1,079 (E) 7306 30 12 Precision tubes, welded, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" 0,830 N/A 0,830 0,913 0,996 1,079 (E) 7306 30 18 Precision tubes, welded, of circular cross-section, of iron or non-alloy steel (excl. cold-drawn or cold-rolled) 0,830 N/A 0,830 0,913 0,996 1,079   7306 30 41 Threaded or threadable tubes "gas pipe", welded, of circular cross-section, of iron or non-alloy steel, plated or coated with zinc 0,830 N/A 0,830 0,913 0,996 1,079 (E) 7306 30 49 Threaded or threadable tubes "gas pipe", welded, of circular cross-section, of iron or non-alloy steel (excl. products plated or coated with zinc) 0,830 N/A 0,830 0,913 0,996 1,079 (E) 7306 30 72 Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel, of an external diameter of <= 168,3 mm, plated or coated with zinc (excl. line pipe of a kind used for oil or gas pipelines or casing and tubingof a kind used in drilling for oil or gas) 0,830 N/A 0,830 0,913 0,996 1,079 (E) 7306 30 77 Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel of an external diameter of <= 168,3 mm (excl. plated or coated with zinc and line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used in drilling for oil or gas, precision tubes and threaded or threadable tubes "gas pipe") 0,830 N/A 0,830 0,913 0,996 1,079 (E) 7306 30 80 Tubes, pipes and hollow profiles, welded, having a circular cross-section, of iron or steel, of an external diameter of > 168,3 mm but <= 406,4 mm (excl. line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, or precision steel tubes, electrical conduit tubes or threaded or threadable tubes "gas pipe") 0,830 N/A 0,830 0,913 0,996 1,079 (E) 7306 40 20 Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. products having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) 2,920 N/A 2,920 3,212 3,504 3,796   7306 40 80 Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel (excl. products cold-drawn or cold-rolled "cold-reduced", tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) 2,920 N/A 2,920 3,212 3,504 3,796   7306 50 21 Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" 0,830 N/A 0,830 0,913 0,996 1,079 (H) 7306 50 29 Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless (excl. cold-drawn or cold-rolled) 0,830 N/A 0,830 0,913 0,996 1,079 (H) 7306 50 80 Tubes, pipes and hollow profiles, welded, of circular cross-section, of alloy steel other than stainless (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and precision steel tubes) 0,830 N/A 0,830 0,913 0,996 1,079 (H) 7306 61 10 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel 2,920 N/A 2,920 3,212 3,504 3,796   7306 61 92 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of <= 2 mm 0,830 N/A 0,830 0,913 0,996 1,079 (E) 7306 61 99 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of > 2 mm 0,830 N/A 0,830 0,913 0,996 1,079 (E) 7306 69 10 Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) 2,920 N/A 2,920 3,212 3,504 3,796   7306 69 90 Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of iron or steel other than stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) 0,830 N/A 0,830 0,913 0,996 1,079 (E) 7306 90 00 Tubes, pipes and hollow profiles "e.g., open seam, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless or welded tubes and pipes and tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm) 0,830 N/A 0,830 0,913 0,996 1,079 (E) 7307 Tube or pipe fittings "e.g. couplings, elbows, sleeves", of iron or steel see below N/A see below see below see below see below   7307 11 Tube or pipe fittings of non-malleable cast iron 1,650 N/A 1,650 1,815 1,980 2,145   7307 19 10 Tube or pipe fittings of cast iron (excl. of non-malleable) 1,650 N/A 1,650 1,815 1,980 2,145   7307 19 90 Cast tube or pipe fittings of steel 0,740 N/A 0,740 0,814 0,888 0,962 (E) 7307 21 00 Flanges of stainless steel (excl. cast products) 2,360 N/A 2,360 2,596 2,832 3,068   7307 22 Threaded elbows, bends and sleeves of stainless steel (excl. cast products) 2,360 N/A 2,360 2,596 2,832 3,068   7307 23 Butt welding tube or pipe fittings of stainless steel (excl. cast products) 2,360 N/A 2,360 2,596 2,832 3,068   7307 29 Tube or pipe fittings of stainless steel (excl. cast products, flanges, threaded elbows, bends and sleeves and butt weldings fittings) 2,360 N/A 2,360 2,596 2,832 3,068   7307 91 00 Flanges of iron or steel (excl. cast or stainless products) 0,740 N/A 0,740 0,814 0,888 0,962 (E) 7307 92 Threaded elbows, bends and sleeves, of stainless steel (excl. cast or stainless products) 0,740 N/A 0,740 0,814 0,888 0,962 (E) 7307 93 Butt welding fittings of iron or steel (excl. cast iron or stainless steel products, and flanges) 0,740 N/A 0,740 0,814 0,888 0,962 (E) 7307 99 Tube or pipe fittings, of iron or steel (excl. cast iron or stainless steel products; flanges; threaded elbows, bends and sleeves; butt welding fittings) 0,740 N/A 0,740 0,814 0,888 0,962 (E) 7308 Structures and parts of structures "e.g., bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns", of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel (excl. prefabricated buildings of heading 9406) 2,180 N/A 2,180 2,398 2,616 2,834 (E) 7309 Reservoirs, tanks, vats and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of > 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated (excl. containers specifically constructed or equipped for one or more types of transport) 2,020 N/A 2,020 2,222 2,424 2,626 (E) 7310 Tanks, casks, drums, cans, boxes and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of <= 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated, n.e.s. 0,840 N/A 0,840 0,924 1,008 1,092 (E) 7311 Containers of iron or steel, for compressed or liquefied gas (excl. containers specifically constructed or equipped for one or more types of transport) see below N/A see below see below see below see below   7311 00 Containers of iron or steel, for compressed or liquefied gas (excl. containers specifically constructed or equipped for one or more types of transport) 2,310 N/A 2,310 2,541 2,772 3,003 (E) 7318 Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers, incl. spring washers, and similar articles, of iron or steel (excl. lag screws, stoppers, plugs and the like, threaded) see below N/A see below see below see below see below   7318 11 00 Coach screws of iron or steel 0,740 N/A 0,740 0,814 0,888 0,962 (E) 7318 12 10 Wood screws of stainless steel (excl. coach screws) 2,920 N/A 2,920 3,212 3,504 3,796 (E) 7318 12 90 Wood screws of iron or steel other than stainless (excl. coach screws) 0,740 N/A 0,740 0,814 0,888 0,962 (E) 7318 13 00 Screw hooks and screw rings, of iron or steel 0,740 N/A 0,740 0,814 0,888 0,962 (E) 7318 14 10 Self-tapping screws, of stainless steel (excl. wood screws) 2,920 N/A 2,920 3,212 3,504 3,796 (E) 7318 14 91 Spaced-thread screws of iron or steel other than stainless 0,740 N/A 0,740 0,814 0,888 0,962 (E) 7318 14 99 Self-tapping screws of iron or steel other than stainless (excl. spaced-thread screws and wood screws) 0,740 N/A 0,740 0,814 0,888 0,962 (E) 7318 15 Threaded screws and bolts, of iron or steel, whether or not with their nuts and washers (excl. coach screws and other wood screws, screw hooks and screw rings, self-tapping screws, lag screws, stoppers, plugs and the like, threaded) 1,370 N/A 1,370 1,507 1,644 1,781 (E) 7318 16 Nuts of iron or steel 1,370 N/A 1,370 1,507 1,644 1,781 (E) 7318 19 00 Threaded articles, of iron or steel, n.e.s. 0,740 N/A 0,740 0,814 0,888 0,962 (E) 7318 21 00 Spring washers and other lock washers, of iron or steel 0,740 N/A 0,740 0,814 0,888 0,962 (E) 7318 22 00 Washers of iron or steel (excl. spring washers and other lock washers) 1,400 N/A 1,400 1,540 1,680 1,820 (E) 7318 23 00 Rivets of iron or steel (excl. tubular and bifurcated rivets for particular uses) 1,200 N/A 1,200 1,320 1,440 1,560 (E) 7318 24 00 Cotters and cotter pins, of iron or steel 0,740 N/A 0,740 0,814 0,888 0,962 (E) 7318 29 00 Non-threaded articles, of iron or steel 0,740 N/A 0,740 0,814 0,888 0,962 (E) 7326 Articles of iron or steel, n.e.s. (excl. cast articles) see below N/A see below see below see below see below   7326 11 00 Grinding balls and similar articles for mills, of iron or steel, forged or stamped, but not further worked 0,740 N/A 0,740 0,814 0,888 0,962 (E) 7326 19 Articles of iron or steel, forged or stamped, but not further worked, n.e.s. (excl. grinding balls and similar articles for mills) 0,740 N/A 0,740 0,814 0,888 0,962 (E) 7326 20 00 Articles of iron or steel wire, n.e.s. 0,740 N/A 0,740 0,814 0,888 0,962 (E) 7326 90 30 Ladders and steps, of iron or steel 0,740 N/A 0,740 0,814 0,888 0,962 (E) 7326 90 40 Pallets and similar platforms for handling goods, of iron or steel 0,740 N/A 0,740 0,814 0,888 0,962 (E) 7326 90 50 Reels for cables, piping and the like, of iron or steel 0,740 N/A 0,740 0,814 0,888 0,962 (E) 7326 90 60 Ventilators, non-mechanical, guttering, hooks and like articles used in the building industry, n.e.s., of iron or steel 0,740 N/A 0,740 0,814 0,888 0,962 (E) 7326 90 92 Articles of iron or steel, open-die forged, n.e.s. 0,740 N/A 0,740 0,814 0,888 0,962 (E) 7326 90 94 Articles of iron or steel, closed-die forged, n.e.s. 0,740 N/A 0,740 0,814 0,888 0,962 (E) 7326 90 96 Sintered articles of iron or steel, n.e.s. 0,740 N/A 0,740 0,814 0,888 0,962 (E) 7326 90 98 Articles of iron or steel, n.e.s. 0,740 N/A 0,740 0,814 0,888 0,962 (E) Qatar Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – – – –   2523 10 00 White clinker – – – – – –   2523 10 00 Grey clinker 0,830 0,030 0,860 0,946 1,032 1,118 (A) 2523 21 00 White Portland cement – – – – – –   2523 29 00 Grey Portland cement 0,850 0,060 0,910 1,001 1,092 1,183   2523 90 00 White hydraulic cements – – – – – –   2523 90 00 Grey hydraulic cements 0,810 0,070 0,880 0,968 1,056 1,144 (A) 2523 30 00 Aluminous cement – – – – – –   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 2,480 0,040 2,520 2,545 2,545 2,545   2814 10 00 Anhydrous ammonia 1,960 0,120 2,070 2,091 2,091 2,091   2814 20 00 Ammonia in aqueous solution 0,590 0,040 0,620 0,626 0,626 0,626   2834 21 00 Nitrate of potassium 2 0,060 2,050 2,071 2,071 2,071   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,420 0,030 0,460 0,465 0,465 0,465   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,700 0,030 0,740 0,747 0,747 0,747   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,280 0,090 1,370 1,384 1,384 1,384   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,250 0,090 1,340 1,353 1,353 1,353   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,570 0,070 0,640 0,646 0,646 0,646   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,270 0,080 1,350 1,364 1,364 1,364   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,510 0,060 1,570 1,586 1,586 1,586   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,320 0,090 2,420 2,444 2,444 2,444   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,980 0,090 2,070 2,091 2,091 2,091   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,980 0,090 2,070 2,091 2,091 2,091   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 3,870 0,060 3,930 3,969 3,969 3,969   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,950 0,080 2,030 2,050 2,050 2,050   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,440 0,070 1,520 1,535 1,535 1,535   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,470 0,090 1,560 1,576 1,576 1,576   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,740 0,070 0,810 0,818 0,818 0,818   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,970 0,090 1,060 1,071 1,071 1,071   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,660 0,070 0,720 0,727 0,727 0,727   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,460 0,050 0,510 0,515 0,515 0,515   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,290 0,040 0,340 0,343 0,343 0,343   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,340 0,110 1,440 1,454 1,454 1,454   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,520 0,090 0,620 0,626 0,626 0,626   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,310 0,060 1,380 1,394 1,394 1,394   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,670 0,050 0,720 0,727 0,727 0,727   Aluminium         10 % mark-up 20 % mark-up 30 % mark-up   7601 Unwrought aluminium 1,700 N/A 1,700 1,870 2,040 2,210 (K) 7603 Aluminium powders and flakes 1,810 N/A 1,810 1,991 2,172 2,353 (K) 7604 10 10 Bars and rods 2,030 N/A 2,030 2,233 2,436 2,639 (K) 7604 10 90 Profiles 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7604 21 00 Hollow profiles 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7604 29 10 Bars and rods 2,030 N/A 2,030 2,233 2,436 2,639 (K) 7604 29 90 Profiles 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7605 Aluminium wire 2,030 N/A 2,030 2,233 2,436 2,639 (K) 7606 Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7608 Aluminium tubes and pipes 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7609 00 00 Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7610 10 00 Doors, windows and their frames and thresholds for doors 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7610 90 Other 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7610 90 10 Bridges and bridge-sections, towers and lattice masts 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7610 90 90 Other 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7611 00 00 Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7612 Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7613 00 00 Aluminium containers for compressed or liquefied gas 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7614 Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated 2,030 N/A 2,030 2,233 2,436 2,639 (K) 7616 10 00 Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7616 91 00 Cloth, grill, netting and fencing, of aluminium wire 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7616 99 10 Cast 1,810 N/A 1,810 1,991 2,172 2,353 (K) 7616 99 90 Other 2,490 N/A 2,490 2,739 2,988 3,237 (K) Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/(A 10,820 11,902 12,984 14,066   Russia Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – – – –   2523 10 00 White clinker 1,330 0,040 1,360 1,496 1,632 1,768 (B) 2523 10 00 Grey clinker 1,330 0,030 1,360 1,496 1,632 1,768 (A) 2523 21 00 White Portland cement 1,310 0,130 1,440 1,584 1,728 1,872   2523 29 00 Grey Portland cement 1,330 0,050 1,380 1,518 1,656 1,794   2523 90 00 White hydraulic cements – – – – – –   2523 90 00 Grey hydraulic cements – – – – – –   2523 30 00 Aluminous cement – – – – – –   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 2,700 0,030 2,730 2,757 2,757 2,757   2814 10 00 Anhydrous ammonia 2,160 0,100 2,260 2,283 2,283 2,283   2814 20 00 Ammonia in aqueous solution 0,650 0,030 0,680 0,687 0,687 0,687   2834 21 00 Nitrate of potassium 2,170 0,040 2,220 2,242 2,242 2,242   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,460 0,020 0,490 0,495 0,495 0,495   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,770 0,020 0,790 0,798 0,798 0,798   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,400 0,070 1,470 1,485 1,485 1,485   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,370 0,070 1,440 1,454 1,454 1,454   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,620 0,050 0,670 0,677 0,677 0,677   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,390 0,060 1,450 1,465 1,465 1,465   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,640 0,050 1,690 1,707 1,707 1,707   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,530 0,070 2,600 2,626 2,626 2,626   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,150 0,070 2,220 2,242 2,242 2,242   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,150 0,070 2,220 2,242 2,242 2,242   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 4,210 0,050 4,260 4,303 4,303 4,303   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,120 0,060 2,180 2,202 2,202 2,202   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,570 0,060 1,630 1,646 1,646 1,646   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,600 0,070 1,670 1,687 1,687 1,687   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,800 0,060 0,860 0,869 0,869 0,869   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,050 0,070 1,120 1,131 1,131 1,131   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,710 0,050 0,760 0,768 0,768 0,768   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,500 0,040 0,550 0,556 0,556 0,556   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,320 0,030 0,350 0,354 0,354 0,354   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,450 0,080 1,530 1,545 1,545 1,545   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,570 0,080 0,650 0,657 0,657 0,657   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,430 0,050 1,480 1,495 1,495 1,495   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,730 0,040 0,760 0,768 0,768 0,768   Aluminium         10 % mark-up 20 % mark-up 30 % mark-up   7601 Unwrought aluminium 2,160 N/A 2,160 2,376 2,592 2,808 (K) 7603 Aluminium powders and flakes 2,270 N/A 2,270 2,497 2,724 2,951 (K) 7604 10 10 Bars and rods 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7604 10 90 Profiles 2,510 N/A 2,510 2,761 3,012 3,263 (K) 7604 21 00 Hollow profiles 2,510 N/A 2,510 2,761 3,012 3,263 (K) 7604 29 10 Bars and rods 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7604 29 90 Profiles 2,510 N/A 2,510 2,761 3,012 3,263 (K) 7605 Aluminium wire 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7606 Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm 2,950 N/A 2,950 3,245 3,540 3,835 (K) 7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm 2,950 N/A 2,950 3,245 3,540 3,835 (K) 7608 Aluminium tubes and pipes 2,510 N/A 2,510 2,761 3,012 3,263 (K) 7609 00 00 Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) 2,510 N/A 2,510 2,761 3,012 3,263 (K) 7610 10 00 Doors, windows and their frames and thresholds for doors 2,510 N/A 2,510 2,761 3,012 3,263 (K) 7610 90 Other 2,510 N/A 2,510 2,761 3,012 3,263 (K) 7610 90 10 Bridges and bridge-sections, towers and lattice masts 2,510 N/A 2,510 2,761 3,012 3,263 (K) 7610 90 90 Other 2,510 N/A 2,510 2,761 3,012 3,263 (K) 7611 00 00 Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 2,950 N/A 2,950 3,245 3,540 3,835 (K) 7612 Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 2,950 N/A 2,950 3,245 3,540 3,835 (K) 7613 00 00 Aluminium containers for compressed or liquefied gas 2,950 N/A 2,950 3,245 3,540 3,835 (K) 7614 Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7616 10 00 Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles 2,950 N/A 2,950 3,245 3,540 3,835 (K) 7616 91 00 Cloth, grill, netting and fencing, of aluminium wire 2,950 N/A 2,950 3,245 3,540 3,835 (K) 7616 99 10 Cast 2,270 N/A 2,270 2,497 2,724 2,951 (K) 7616 99 90 Other 2,950 N/A 2,950 3,245 3,540 3,835 (K) Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066   Iron and steel         10 % mark-up 20 % mark-up 30 % mark-up   2601 12 00 Agglomerated iron ores and concentrates (excl. roasted iron pyrites) 1,570 0,040 1,610 1,771 1,932 2,093   7201 Pig iron and spiegeleisen, in pigs, blocks or other primary forms 3,040 N/A 3,040 3,344 3,648 3,952   7202 11 Ferro-manganese, containing by weight > 2% of carbon 1,690 N/A 1,690 1,859 2,028 2,197   7202 19 Ferro-manganese, containing by weight <= 2% carbon – N/A – – – –   7202 41 Ferro-chromium, containing by weight > 4% of carbon 2,350 N/A 2,350 2,585 2,820 3,055   7202 49 Ferro-chromium, containing by weight <= 4% of carbon – N/A – – – –   7202 60 00 Ferro-nickel 3,480 N/A 3,480 3,828 4,176 4,524   7203 Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99,94%, in lumps, pellets or similar forms 2,010 N/A 2,010 2,211 2,412 2,613   7205 Granules and powders of pig iron, spiegeleisen, iron or steel (excl. granules and powders of ferro-alloys, turnings and filings of iron or steel, radioactive iron powders "isotopes" and certain low-calibre, substandard balls for ballbearings) 3,090 N/A 3,090 3,399 3,708 4,017 (C) 7206 Iron and non-alloy steel in ingots or other primary forms (excl. remelting scrap ingots, products obtained by continuous casting and iron of heading 7203) see below N/A see below see below see below see below   7206 10 00 Ingots, of iron and non-alloy steel (excl. remelted scrap ingots, continuous cast products, iron of heading 7203) 3,210 N/A 3,210 3,531 3,852 4,173 (C) 7206 90 00 Iron and non-alloy steel, in puddled bars or other primary forms (excl. ingots, remelted scrap ingots, continuous cast products, iron of heading 7203) 3,210 N/A 3,210 3,531 3,852 4,173 (C) 7207 Semi-finished products of iron or non-alloy steel see below N/A see below see below see below see below   7207 11 11 Semi-finished products, of non-alloy free-cutting steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting 3,210 N/A 3,210 3,531 3,852 4,173 (C) 7207 11 14 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness of <= 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel) 3,210 N/A 3,210 3,531 3,852 4,173 (C) 7207 11 16 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness of > 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel) 3,210 N/A 3,210 3,531 3,852 4,173 (C) 7207 11 90 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular cross-section, the width < twice the thickness, forged 3,210 N/A 3,210 3,531 3,852 4,173 (C) 7207 12 10 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtained by continuous casting 3,210 N/A 3,210 3,531 3,852 4,173 (C) 7207 12 90 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular "other than square" cross-section, the width >= twice the thickness, forged 3,210 N/A 3,210 3,531 3,852 4,173 (C) 7207 19 12 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting 3,210 N/A 3,210 3,531 3,852 4,173 (C) 7207 19 19 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, forged 3,210 N/A 3,210 3,531 3,852 4,173 (C) 7207 19 80 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon (excl. semi-products, of square, rectangular, circular or polygonal cross-section) 3,210 N/A 3,210 3,531 3,852 4,173 (C) 7207 20 11 Semi-finished products, of non-alloy free-cutting steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting 3,210 N/A 3,210 3,531 3,852 4,173 (C) 7207 20 15 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% but < 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel) 3,210 N/A 3,210 3,531 3,852 4,173 (C) 7207 20 17 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel) 3,210 N/A 3,210 3,531 3,852 4,173 (C) 7207 20 19 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, forged 3,210 N/A 3,210 3,531 3,852 4,173 (C) 7207 20 32 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtained by continuous casting 3,210 N/A 3,210 3,531 3,852 4,173 (C) 7207 20 39 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of rectangular "other than square" cross-section and the width >= twice the thickness, forged 3,210 N/A 3,210 3,531 3,852 4,173 (C) 7207 20 52 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting 3,210 N/A 3,210 3,531 3,852 4,173 (C) 7207 20 59 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of circular or polygonal cross-section, forged 3,210 N/A 3,210 3,531 3,852 4,173 (C) 7207 20 80 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon (excl. those of square, rectangular, circular or polygonal cross-section) 3,210 N/A 3,210 3,531 3,852 4,173 (C) 7208 Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled, not clad, plated or coated 3,430 N/A 3,430 3,773 4,116 4,459 (C) 7209 Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, cold-rolled "cold-reduced", not clad, plated or coated 3,590 N/A 3,590 3,949 4,308 4,667 (C) 7210 Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated 3,590 N/A 3,590 3,949 4,308 4,667 (C) 7211 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", not clad, plated or coated see below N/A see below see below see below see below   7211 13 00 Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as "wide flats" 3,430 N/A 3,430 3,773 4,116 4,459 (C) 7211 14 00 Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, not further worked than hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm (excl. "wide flats") 3,430 N/A 3,430 3,773 4,116 4,459 (C) 7211 19 00 Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, simply hot-rolled, not clad, plated or coated, of a thickness < 4,75 mm (excl. "wide flats") 3,430 N/A 3,430 3,773 4,116 4,459 (C) 7211 23 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight < 0,25% of carbon 3,590 N/A 3,590 3,949 4,308 4,667 (C) 7211 29 00 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight >= 0,25% of carbon 3,590 N/A 3,590 3,949 4,308 4,667 (C) 7211 90 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked, but not clad, plated or coated 3,590 N/A 3,590 3,949 4,308 4,667 (C) 7212 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated 3,590 N/A 3,590 3,949 4,308 4,667 (C) 7213 Bars and rods of iron or non-alloy steel, hot-rolled, in irregularly wound coils 3,210 N/A 3,210 3,531 3,852 4,173 (C) 7214 Bars and rods, of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but incl. those twisted after rolling (excl. in irregularly wound coils) see below N/A see below see below see below see below   7214 10 00 Bars and rods, of iron or non-alloy steel, not further worked than forged (excl. in irregularly wound coils) 3,210 N/A 3,210 3,531 3,852 4,173 (C) 7214 20 00 Bars and rods, of iron or non-alloy steel, with indentations, ribs, groves or other deformations produced during the rolling process 3,210 N/A 3,210 3,531 3,852 4,173 (C) 7214 30 00 Bars and rods, of non-alloy free-cutting steel, not further worked than hot-rolled, hot-drawn or hot-extruded (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling) 3,210 N/A 3,210 3,531 3,852 4,173 (C) 7214 91 Bars and rods, of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, of rectangular "other than square" cross-section (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process, bars and rods twisted after rolling and free-cutting steel) 3,210 N/A 3,210 3,531 3,852 4,173 (C) 7214 99 Bars and rods, of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded (excl. of rectangular [other than square] cross-section and those containing indentations, ribs, grooves or other deformations produced during the rolling process, and of non-alloy free-cutting steel) 3,210 N/A 3,210 3,531 3,852 4,173 (C) 7215 Bars and rods, of iron or non-alloy steel, cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked, n.e.s. 3,210 N/A 3,210 3,531 3,852 4,173 (C) 7216 Angles, shapes and sections of iron or non-alloy steel, n.e.s. 3,210 N/A 3,210 3,531 3,852 4,173 (C) 7217 Wire of iron or non-alloy steel, in coils (excl. bars and rods) see below N/A see below see below see below see below   7217 10 Wire of iron or non-alloy steel, in coils, not plated or coated, whether or not polished (excl. bars and rods) 3,210 N/A 3,210 3,531 3,852 4,173 (C) 7217 20 Wire of iron or non-alloy steel, in coils, plated or coated with zinc (excl. bars and rods) 3,210 N/A 3,210 3,531 3,852 4,173 (C) 7217 30 Wire of iron or non-alloy steel, in coils, plated or coated with base metals (excl. plated or coated with zinc, and bars and rods) 3,210 N/A 3,210 3,531 3,852 4,173 (C) 7217 90 Wire of iron or non-alloy steel, in coils, plated or coated (excl. plated or coated with base metals, and bars and rods) 3,210 N/A 3,210 3,531 3,852 4,173 (C) 7218 Stainless steel in ingots or other primary forms (excl. remelting scrap ingots and products obtained by continuous casting); semi-finished products of stainless steel see below N/A see below see below see below see below   7218 10 00 Steel, stainless, in ingots and other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) 3,180 N/A 3,180 3,498 3,816 4,134   7218 91 Semi-finished products of stainless steel, of rectangular "other than square" cross-section 3,550 N/A 3,550 3,905 4,260 4,615   7218 99 11 Semi-finished products of stainless steel, of square cross-section, rolled or obtained by continuous casting 3,550 N/A 3,550 3,905 4,260 4,615   7218 99 19 Semi-finished products of stainless steel, of square cross-section, forged 3,180 N/A 3,180 3,498 3,816 4,134   7218 99 20 Semi-finished products of stainless steel, of circular cross-section or of cross-section other than square or rectangular, rolled or obtained by continuous casting 3,550 N/A 3,550 3,905 4,260 4,615   7218 99 80 Semi-finished products of stainless steel, forged (excl. products of square or rectangular cross-section) 3,180 N/A 3,180 3,498 3,816 4,134   7219 Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" see below N/A see below see below see below see below   7219 11 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of > 10 mm 3,550 N/A 3,550 3,905 4,260 4,615   7219 12 Flat-rolled products of stainless steel, of a width of>= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 4,7 mm and <= 10 mm 3,550 N/A 3,550 3,905 4,260 4,615   7219 13 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 3 mm and < 4,75 mm 3,550 N/A 3,550 3,905 4,260 4,615   7219 14 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of < 3 mm 3,550 N/A 3,550 3,905 4,260 4,615   7219 21 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of > 10 mm 3,550 N/A 3,550 3,905 4,260 4,615   7219 22 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 4,75 mm and <= 10 mm 3,550 N/A 3,550 3,905 4,260 4,615   7219 23 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 3 mm and < 4,75 mm 3,550 N/A 3,550 3,905 4,260 4,615   7219 24 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of < 3 mm 3,550 N/A 3,550 3,905 4,260 4,615   7219 31 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 4,75 mm 3,710 N/A 3,710 4,081 4,452 4,823   7219 32 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 3 mm but < 4,75 mm 3,710 N/A 3,710 4,081 4,452 4,823   7219 33 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of > 1 mm but < 3 mm 3,710 N/A 3,710 4,081 4,452 4,823   7219 34 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 0,5 mm but <= 1 mm 3,710 N/A 3,710 4,081 4,452 4,823   7219 35 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of < 0,5 mm 3,710 N/A 3,710 4,081 4,452 4,823   7219 90 Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked 3,710 N/A 3,710 4,081 4,452 4,823   7220 Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" see below N/A see below see below see below see below   7220 11 00 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of >= 4,75 mm 3,550 N/A 3,550 3,905 4,260 4,615   7220 12 00 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of < 4,75 mm 3,550 N/A 3,550 3,905 4,260 4,615   7220 20 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" 3,710 N/A 3,710 4,081 4,452 4,823   7220 90 Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked 3,710 N/A 3,710 4,081 4,452 4,823   7221 Bars and rods of stainless steel, hot-rolled, in irregularly wound coils 3,180 N/A 3,180 3,498 3,816 4,134   7222 Other bars and rods of stainless steel; angles, shapes and sections of stainless steel, n.e.s. see below N/A see below see below see below see below   7222 11 Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only hot-extruded, of circular cross-section 3,180 N/A 3,180 3,498 3,816 4,134   7222 19 Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only extruded (excl. of circular cross-section) 3,180 N/A 3,180 3,498 3,816 4,134   7222 20 Other bars and rods of stainless steel, not further worked than cold-formed or cold-finished 3,180 N/A 3,180 3,498 3,816 4,134   7222 30 Other bars and rods of stainless steel, cold-formed or cold-finished and further worked, or not further worked than forged, or forged, or hot-formed by other means and further worked, n.e.s. 3,180 N/A 3,180 3,498 3,816 4,134   7222 40 Angles, shapes and sections of stainless steel, n.e.s. 3,180 N/A 3,180 3,498 3,816 4,134   7223 Wire of stainless steel, in coils (excl. bars and rods) see below N/A see below see below see below see below   7223 00 Wire of stainless steel, in coils (excl. bars and rods) 3,180 N/A 3,180 3,498 3,816 4,134   7224 Steel, alloy, other than stainless, in ingots or other primary forms, semi-finished products of alloy steel other than stainless (excl. waste and scrap in ingot form, and products obtained by continuous casting) see below N/A see below see below see below see below   7224 10 Steel, alloy, other than stainless, in ingots or other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) 3,460 N/A 3,460 3,806 4,152 4,498 (F) 7224 90 02 Semi-finished products of tool steel 3,830 N/A 3,830 4,213 4,596 4,979 (F) 7224 90 03 Semi-finished products of high-speed steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting the width measuring < twice the thickness 3,830 N/A 3,830 4,213 4,596 4,979 (F) 7224 90 05 Semi-finished products of steel containing by weight <= 0,7% of carbon, 0,5% to 1,2% of manganese, 0,6% to 2,3% of silicon, or of steel containing by weight >= 0,0008% of boron with any other element < the minimum content referred to in Note 1 f to chapter 72, of square or rectangular cross-section, hot rolled or obtained by continuous casting, the width measuring < twice the thickness 3,830 N/A 3,830 4,213 4,596 4,979 (F) 7224 90 07 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring < twice the thickness (excl. of tool steel, high-speed steel and articles of subheading 7224.90.05) 3,830 N/A 3,830 4,213 4,596 4,979 (F) 7224 90 14 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring >= twice the thickness (excl. of tool steel) 3,830 N/A 3,830 4,213 4,596 4,979 (F) 7224 90 18 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, forged (excl. of tool steel) 3,460 N/A 3,460 3,806 4,152 4,498 (F) 7224 90 31 Semi-finished products of steel containing by weight 0,9% to 1,15% carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting 3,830 N/A 3,830 4,213 4,596 4,979 (F) 7224 90 38 Semi-finished products of alloy steel, other than stainless steel, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting (excl. of tool steel and products containing by weight 0,9% to 1,15% of carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum) 3,830 N/A 3,830 4,213 4,596 4,979 (F) 7224 90 90 Semi-finished products of alloy steel, other than stainless steel, forged (excl. of tool steel and products of square or rectangular, circular or polygamol cross-section) 3,460 N/A 3,460 3,806 4,152 4,498 (F) 7225 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" see below N/A see below see below see below see below   7225 11 00 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, grain-oriented 4,950 N/A 4,950 5,445 5,940 6,435 (C) 7225 19 10 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, hot-rolled 3,830 N/A 3,830 4,213 4,596 4,979 (C) 7225 19 90 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, cold-rolled "cold-reduced", non-grain-oriented 3,990 N/A 3,990 4,389 4,788 5,187 (F) 7225 30 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, in coils (excl. products of silicon-electrical steel) 3,830 N/A 3,830 4,213 4,596 4,979 (F) 7225 40 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, not in coils (excl. products of silicon-electrical steel) 3,830 N/A 3,830 4,213 4,596 4,979 (F) 7225 50 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of silicon-electrical steel) 3,990 N/A 3,990 4,389 4,788 5,187 (F) 7225 91 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and electrolytically plated or coated with zinc (excl. products of silicon-electrical steel) 3,990 N/A 3,990 4,389 4,788 5,187 (F) 7225 92 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and plated or coated with zinc (excl. electrolytically plated or coated and products of silicon-electrical steel) 3,990 N/A 3,990 4,389 4,788 5,187 (F) 7225 99 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. plated or coated with zinc and products of silicon-electrical steel) 3,990 N/A 3,990 4,389 4,788 5,187 (F) 7226 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" see below N/A see below see below see below see below   7226 11 00 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", grain-oriented 4,950 N/A 4,950 5,445 5,940 6,435 (C) 7226 19 10 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, not further worked than hot-rolled 3,830 N/A 3,830 4,213 4,596 4,979 (C) 7226 19 80 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, cold-rolled "cold-reduced", whether or not further worked, or hot-rolled and further worked, non-grain-oriented 3,990 N/A 3,990 4,389 4,788 5,187 (F) 7226 20 00 Flat-rolled products of high-speed steel, of a width of <= 600 mm, hot-rolled or cold-rolled "cold-reduced" 3,830 N/A 3,830 4,213 4,596 4,979 (F) 7226 91 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than hot-rolled (excl. products of high-speed steel or silicon-electrical steel) 3,830 N/A 3,830 4,213 4,596 4,979 (F) 7226 92 00 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of high-speed steel or silicon-electrical steel) 3,990 N/A 3,990 4,389 4,788 5,187 (F) 7226 99 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. products of high-speed steel or silicon-electrical steel) 3,990 N/A 3,990 4,389 4,788 5,187 (F) 7227 Bars and rods of alloy steel other than stainless, hot-rolled, in irregularly wound coils 3,460 N/A 3,460 3,806 4,152 4,498 (C)/(F) 7228 Other bars and rods of alloy steel other than stainless, angles, shapes and sections of alloy steel other than stainless, n.e.s.; hollow drill bars and rods, of alloy or non-alloy steel see below N/A see below see below see below see below   7228 10 20 Bars and rods of high-speed steel, not further worked than hot-rolled, hot-drawn or extruded, and hot-rolled, hot-drawn or extruded, not further worked than clad (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,460 N/A 3,460 3,806 4,152 4,498 (F) 7228 10 50 Bars and rods of high-speed steel, forged (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,460 N/A 3,460 3,806 4,152 4,498 (F) 7228 10 90 Bars and rods of high-speed steel, not further worked than cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked (excl. forged products, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,460 N/A 3,460 3,806 4,152 4,498 (F) 7228 20 Bars and rods of silico-manganese steel (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,460 N/A 3,460 3,806 4,152 4,498 (F) 7228 30 Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,460 N/A 3,460 3,806 4,152 4,498 (C)/(F) 7228 40 Bars and rods of alloy steel other than stainless, not further worked than forged (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,460 N/A 3,460 3,806 4,152 4,498 (F) 7228 50 Bars and rods of alloy steel other than stainless, not further worked than cold-formed or cold-finished (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,460 N/A 3,460 3,806 4,152 4,498 (C)/(F) 7228 60 Bars and rods of alloy steel other than stainless, cold-formed or cold-finished and further worked or hot-formed and further worked, n.e.s. (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,460 N/A 3,460 3,806 4,152 4,498 (F) 7228 70 Angles, shapes and sections of alloy steel other than stainless, n.e.s. 3,460 N/A 3,460 3,806 4,152 4,498 (F) 7228 80 00 Hollow drill bars and rods, of alloy or non-alloy steel 3,460 N/A 3,460 3,806 4,152 4,498 (F) 7229 Wire of alloy steel other than stainless, in coils (excl. bars and rods) 3,460 N/A 3,460 3,806 4,152 4,498 (C)/(F) 7301 Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel 3,590 N/A 3,590 3,949 4,308 4,667 (C) 7302 Railway or tramway track construction material of iron or steel, the following : rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers "cross-ties", fish-plates, chairs, chair wedges, sole plates "base plates", rail clips, bedplates, ties and other material specialised for jointing or fixing rails 3,490 N/A 3,490 3,839 4,188 4,537 (C) 7303 Tubes, pipes and hollow profiles, of cast iron see below N/A see below see below see below see below   7303 00 Tubes, pipes and hollow profiles, of cast iron 6,960 N/A 6,960 7,656 8,352 9,048   7304 Tubes, pipes and hollow profiles, seamless, of iron or steel (excl. products of cast iron) see below N/A see below see below see below see below   7304 11 00 Line pipe of a kind used for oil or gas pipelines, seamless, of stainless steel 3,460 N/A 3,460 3,806 4,152 4,498   7304 19 Line pipe of a kind used for oil or gas pipelines, seamless, of iron or steel (excl. products of stainless steel or of cast iron) 3,490 N/A 3,490 3,839 4,188 4,537 (C) 7304 22 00 Drill pipe, seamless, of stainless steel, of a kind used in drilling for oil or gas 3,460 N/A 3,460 3,806 4,152 4,498   7304 23 00 Drill pipe, seamless, of a kind used in drilling for oil or gas, of iron or steel (excl. products of stainless steel or of cast iron) 3,490 N/A 3,490 3,839 4,188 4,537 (C) 7304 24 00 Casing and tubing, seamless, of a kind used for drilling for oil or gas, of stainless steel 3,460 N/A 3,460 3,806 4,152 4,498   7304 29 Casing and tubing, seamless, of iron or steel, of a kind used in drilling for oil or gas (excl. products of cast iron) 3,490 N/A 3,490 3,839 4,188 4,537 (C) 7304 31 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" (excl. cast iron products and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used for drilling for oil or gas) 3,490 N/A 3,490 3,839 4,188 4,537 (C) 7304 39 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, not cold-drawn or cold-rolled "cold-reduced" (excl. cast iron products, line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas) 3,490 N/A 3,490 3,839 4,188 4,537 (C) 7304 41 00 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas) 3,460 N/A 3,460 3,806 4,152 4,498   7304 49 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines or of a kind used for drilling for oil or gas) 3,460 N/A 3,460 3,806 4,152 4,498   7304 51 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil) 3,350 N/A 3,350 3,685 4,020 4,355 (F) 7304 59 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil) 3,350 N/A 3,350 3,685 4,020 4,355 (C)/(F) 7304 90 00 Tubes, pipes and hollow profiles, seamless, of non-circular cross-section, of iron or steel (excl. products of cast iron) 3,490 N/A 3,490 3,839 4,188 4,537 (C) 7305 Tubes and pipes, having circular cross-sections and an external diameter of > 406,4 mm, of flat-rolled products of iron or steel "e.g., welded, riveted or similarly closed" 3,590 N/A 3,590 3,949 4,308 4,667 (C) 7306 Tubes, pipes and hollow profiles "e.g., open seam or welded, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless tubes and pipes and tubes having internal and external circular cross-sections and an external diameter of > 406,4 mm) see below N/A see below see below see below see below   7306 11 00 Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm 3,710 N/A 3,710 4,081 4,452 4,823   7306 19 00 Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron) 3,590 N/A 3,590 3,949 4,308 4,667 (C) 7306 21 00 Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm 3,710 N/A 3,710 4,081 4,452 4,823   7306 29 00 Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron) 3,590 N/A 3,590 3,949 4,308 4,667 (C) 7306 30 12 Precision tubes, welded, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" 3,590 N/A 3,590 3,949 4,308 4,667 (C) 7306 30 18 Precision tubes, welded, of circular cross-section, of iron or non-alloy steel (excl. cold-drawn or cold-rolled) 3,430 N/A 3,430 3,773 4,116 4,459   7306 30 41 Threaded or threadable tubes "gas pipe", welded, of circular cross-section, of iron or non-alloy steel, plated or coated with zinc 3,590 N/A 3,590 3,949 4,308 4,667 (C) 7306 30 49 Threaded or threadable tubes "gas pipe", welded, of circular cross-section, of iron or non-alloy steel (excl. products plated or coated with zinc) 3,590 N/A 3,590 3,949 4,308 4,667 (C) 7306 30 72 Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel, of an external diameter of <= 168,3 mm, plated or coated with zinc (excl. line pipe of a kind used for oil or gas pipelines or casing and tubingof a kind used in drilling for oil or gas) 3,590 N/A 3,590 3,949 4,308 4,667 (C) 7306 30 77 Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel of an external diameter of <= 168,3 mm (excl. plated or coated with zinc and line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used in drilling for oil or gas, precision tubes and threaded or threadable tubes "gas pipe") 3,590 N/A 3,590 3,949 4,308 4,667 (C) 7306 30 80 Tubes, pipes and hollow profiles, welded, having a circular cross-section, of iron or steel, of an external diameter of > 168,3 mm but <= 406,4 mm (excl. line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, or precision steel tubes, electrical conduit tubes or threaded or threadable tubes "gas pipe") 3,590 N/A 3,590 3,949 4,308 4,667 (C) 7306 40 20 Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. products having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) 3,710 N/A 3,710 4,081 4,452 4,823   7306 40 80 Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel (excl. products cold-drawn or cold-rolled "cold-reduced", tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) 3,550 N/A 3,550 3,905 4,260 4,615   7306 50 21 Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" 3,620 N/A 3,620 3,982 4,344 4,706 (F) 7306 50 29 Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless (excl. cold-drawn or cold-rolled) 3,460 N/A 3,460 3,806 4,152 4,498 (F) 7306 50 80 Tubes, pipes and hollow profiles, welded, of circular cross-section, of alloy steel other than stainless (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and precision steel tubes) 3,620 N/A 3,620 3,982 4,344 4,706 (F) 7306 61 10 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel 3,710 N/A 3,710 4,081 4,452 4,823   7306 61 92 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of <= 2 mm 3,590 N/A 3,590 3,949 4,308 4,667 (C) 7306 61 99 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of > 2 mm 3,590 N/A 3,590 3,949 4,308 4,667 (C) 7306 69 10 Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) 3,710 N/A 3,710 4,081 4,452 4,823   7306 69 90 Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of iron or steel other than stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) 3,590 N/A 3,590 3,949 4,308 4,667 (C) 7306 90 00 Tubes, pipes and hollow profiles "e.g., open seam, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless or welded tubes and pipes and tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm) 3,590 N/A 3,590 3,949 4,308 4,667 (C) 7307 Tube or pipe fittings "e.g. couplings, elbows, sleeves", of iron or steel see below N/A see below see below see below see below   7307 11 Tube or pipe fittings of non-malleable cast iron 3,030 N/A 3,030 3,333 3,636 3,939   7307 19 10 Tube or pipe fittings of cast iron (excl. of non-malleable) 3,030 N/A 3,030 3,333 3,636 3,939   7307 19 90 Cast tube or pipe fittings of steel 3,210 N/A 3,210 3,531 3,852 4,173 (C) 7307 21 00 Flanges of stainless steel (excl. cast products) 3,360 N/A 3,360 3,696 4,032 4,368   7307 22 Threaded elbows, bends and sleeves of stainless steel (excl. cast products) 3,360 N/A 3,360 3,696 4,032 4,368   7307 23 Butt welding tube or pipe fittings of stainless steel (excl. cast products) 3,360 N/A 3,360 3,696 4,032 4,368   7307 29 Tube or pipe fittings of stainless steel (excl. cast products, flanges, threaded elbows, bends and sleeves and butt weldings fittings) 3,360 N/A 3,360 3,696 4,032 4,368   7307 91 00 Flanges of iron or steel (excl. cast or stainless products) 3,490 N/A 3,490 3,839 4,188 4,537 (C) 7307 92 Threaded elbows, bends and sleeves, of stainless steel (excl. cast or stainless products) 3,490 N/A 3,490 3,839 4,188 4,537 (C) 7307 93 Butt welding fittings of iron or steel (excl. cast iron or stainless steel products, and flanges) 3,490 N/A 3,490 3,839 4,188 4,537 (C) 7307 99 Tube or pipe fittings, of iron or steel (excl. cast iron or stainless steel products; flanges; threaded elbows, bends and sleeves; butt welding fittings) 3,490 N/A 3,490 3,839 4,188 4,537 (C) 7308 Structures and parts of structures "e.g., bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns", of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel (excl. prefabricated buildings of heading 9406) 3,590 N/A 3,590 3,949 4,308 4,667 (C) 7309 Reservoirs, tanks, vats and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of > 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated (excl. containers specifically constructed or equipped for one or more types of transport) 3,590 N/A 3,590 3,949 4,308 4,667 (C) 7310 Tanks, casks, drums, cans, boxes and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of <= 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated, n.e.s. 3,590 N/A 3,590 3,949 4,308 4,667 (C) 7311 Containers of iron or steel, for compressed or liquefied gas (excl. containers specifically constructed or equipped for one or more types of transport) see below N/A see below see below see below see below   7311 00 Containers of iron or steel, for compressed or liquefied gas (excl. containers specifically constructed or equipped for one or more types of transport) 3,210 N/A 3,210 3,531 3,852 4,173 (C) 7318 Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers, incl. spring washers, and similar articles, of iron or steel (excl. lag screws, stoppers, plugs and the like, threaded) see below N/A see below see below see below see below   7318 11 00 Coach screws of iron or steel 3,210 N/A 3,210 3,531 3,852 4,173 (C) 7318 12 10 Wood screws of stainless steel (excl. coach screws) 3,180 N/A 3,180 3,498 3,816 4,134 (C) 7318 12 90 Wood screws of iron or steel other than stainless (excl. coach screws) 3,210 N/A 3,210 3,531 3,852 4,173 (C) 7318 13 00 Screw hooks and screw rings, of iron or steel 3,210 N/A 3,210 3,531 3,852 4,173 (C) 7318 14 10 Self-tapping screws, of stainless steel (excl. wood screws) 3,180 N/A 3,180 3,498 3,816 4,134 (C) 7318 14 91 Spaced-thread screws of iron or steel other than stainless 3,210 N/A 3,210 3,531 3,852 4,173 (C) 7318 14 99 Self-tapping screws of iron or steel other than stainless (excl. spaced-thread screws and wood screws) 3,210 N/A 3,210 3,531 3,852 4,173 (C) 7318 15 Threaded screws and bolts, of iron or steel, whether or not with their nuts and washers (excl. coach screws and other wood screws, screw hooks and screw rings, self-tapping screws, lag screws, stoppers, plugs and the like, threaded) 3,210 N/A 3,210 3,531 3,852 4,173 (C) 7318 16 Nuts of iron or steel 3,210 N/A 3,210 3,531 3,852 4,173 (C) 7318 19 00 Threaded articles, of iron or steel, n.e.s. 3,210 N/A 3,210 3,531 3,852 4,173 (C) 7318 21 00 Spring washers and other lock washers, of iron or steel 3,210 N/A 3,210 3,531 3,852 4,173 (C) 7318 22 00 Washers of iron or steel (excl. spring washers and other lock washers) 3,210 N/A 3,210 3,531 3,852 4,173 (C) 7318 23 00 Rivets of iron or steel (excl. tubular and bifurcated rivets for particular uses) 3,210 N/A 3,210 3,531 3,852 4,173 (C) 7318 24 00 Cotters and cotter pins, of iron or steel 3,210 N/A 3,210 3,531 3,852 4,173 (C) 7318 29 00 Non-threaded articles, of iron or steel 3,210 N/A 3,210 3,531 3,852 4,173 (C) 7326 Articles of iron or steel, n.e.s. (excl. cast articles) see below N/A see below see below see below see below   7326 11 00 Grinding balls and similar articles for mills, of iron or steel, forged or stamped, but not further worked 3,210 N/A 3,210 3,531 3,852 4,173 (C) 7326 19 Articles of iron or steel, forged or stamped, but not further worked, n.e.s. (excl. grinding balls and similar articles for mills) 3,210 N/A 3,210 3,531 3,852 4,173 (C) 7326 20 00 Articles of iron or steel wire, n.e.s. 3,210 N/A 3,210 3,531 3,852 4,173 (C) 7326 90 30 Ladders and steps, of iron or steel 3,210 N/A 3,210 3,531 3,852 4,173 (C) 7326 90 40 Pallets and similar platforms for handling goods, of iron or steel 3,210 N/A 3,210 3,531 3,852 4,173 (C) 7326 90 50 Reels for cables, piping and the like, of iron or steel 3,210 N/A 3,210 3,531 3,852 4,173 (C) 7326 90 60 Ventilators, non-mechanical, guttering, hooks and like articles used in the building industry, n.e.s., of iron or steel 3,210 N/A 3,210 3,531 3,852 4,173 (C) 7326 90 92 Articles of iron or steel, open-die forged, n.e.s. 3,210 N/A 3,210 3,531 3,852 4,173 (C) 7326 90 94 Articles of iron or steel, closed-die forged, n.e.s. 3,210 N/A 3,210 3,531 3,852 4,173 (C) 7326 90 96 Sintered articles of iron or steel, n.e.s. 3,210 N/A 3,210 3,531 3,852 4,173 (C) 7326 90 98 Articles of iron or steel, n.e.s. 3,590 N/A 3,590 3,949 4,308 4,667 (C) Rwanda Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – – – –   2523 10 00 White clinker – – – – – –   2523 10 00 Grey clinker 0,850 0,030 0,880 0,968 1,056 1,144 (A) 2523 21 00 White Portland cement – – – – – –   2523 29 00 Grey Portland cement 0,870 0,050 0,910 1,001 1,092 1,183   2523 90 00 White hydraulic cements – – – – – –   2523 90 00 Grey hydraulic cements 0,830 0,050 0,880 0,968 1,056 1,144 (A) 2523 30 00 Aluminous cement – – – – – –   Saudi Arabia Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 2,450 0,050 2,500 2,525 2,525 2,525   2814 10 00 Anhydrous ammonia 1,960 0,150 2,100 2,121 2,121 2,121   2814 20 00 Ammonia in aqueous solution 0,590 0,040 0,630 0,636 0,636 0,636   2834 21 00 Nitrate of potassium 1,980 0,070 2,060 2,081 2,081 2,081   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,450 0,040 0,490 0,495 0,495 0,495   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,740 0,040 0,780 0,788 0,788 0,788   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,350 0,120 1,470 1,485 1,485 1,485   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,320 0,120 1,440 1,454 1,454 1,454   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,580 0,090 0,670 0,677 0,677 0,677   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,280 0,100 1,380 1,394 1,394 1,394   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,500 0,080 1,580 1,596 1,596 1,596   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,310 0,120 2,430 2,454 2,454 2,454   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,990 0,110 2,100 2,121 2,121 2,121   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,990 0,110 2,100 2,121 2,121 2,121   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 3,820 0,080 3,900 3,939 3,939 3,939   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,940 0,100 2,040 2,060 2,060 2,060   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,460 0,090 1,550 1,566 1,566 1,566   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,510 0,110 1,620 1,636 1,636 1,636   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,740 0,090 0,830 0,838 0,838 0,838   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,980 0,110 1,090 1,101 1,101 1,101   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,660 0,080 0,750 0,758 0,758 0,758   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,460 0,070 0,530 0,535 0,535 0,535   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,300 0,050 0,350 0,354 0,354 0,354   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,340 0,140 1,480 1,495 1,495 1,495   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,540 0,110 0,650 0,657 0,657 0,657   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,310 0,080 1,390 1,404 1,404 1,404   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,670 0,060 0,730 0,737 0,737 0,737   Aluminium         10 % mark-up 20 % mark-up 30 % mark-up   7601 Unwrought aluminium 1,700 N/A 1,700 1,870 2,040 2,210 (K) 7603 Aluminium powders and flakes 1,810 N/A 1,810 1,991 2,172 2,353 (K) 7604 10 10 Bars and rods 2,040 N/A 2,040 2,244 2,448 2,652 (K) 7604 10 90 Profiles 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7604 21 00 Hollow profiles 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7604 29 10 Bars and rods 2,040 N/A 2,040 2,244 2,448 2,652 (K) 7604 29 90 Profiles 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7605 Aluminium wire 2,040 N/A 2,040 2,244 2,448 2,652 (K) 7606 Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7608 Aluminium tubes and pipes 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7609 00 00 Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7610 10 00 Doors, windows and their frames and thresholds for doors 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7610 90 Other 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7610 90 10 Bridges and bridge-sections, towers and lattice masts 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7610 90 90 Other 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7611 00 00 Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7612 Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7613 00 00 Aluminium containers for compressed or liquefied gas 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7614 Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated 2,040 N/A 2,040 2,244 2,448 2,652 (K) 7616 10 00 Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7616 91 00 Cloth, grill, netting and fencing, of aluminium wire 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7616 99 10 Cast 1,810 N/A 1,810 1,991 2,172 2,353 (K) 7616 99 90 Other 2,490 N/A 2,490 2,739 2,988 3,237 (K) Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 13,450 N/A 13,450 14,795 16,140 17,485   Senegal Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – – – – (A) 2523 10 00 White clinker – – – – – – (B) 2523 10 00 Grey clinker 1,240 0,050 1,300 1,430 1,560 1,690 (A) 2523 21 00 White Portland cement – – – – – –   2523 29 00 Grey Portland cement 1,230 0,090 1,320 1,452 1,584 1,716   2523 90 00 White hydraulic cements – – – – – – (B) 2523 90 00 Grey hydraulic cements – – – – – – (A) 2523 30 00 Aluminous cement – – – – – –   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 1,670 0,060 1,720 1,737 1,737 1,737   2814 10 00 Anhydrous ammonia – – – – – –   2814 20 00 Ammonia in aqueous solution 0,640 0,050 0,690 0,697 0,697 0,697   2834 21 00 Nitrate of potassium 1,500 0,080 1,580 1,596 1,596 1,596   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,470 0,040 0,510 0,515 0,515 0,515   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,780 0,040 0,820 0,828 0,828 0,828   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,410 0,140 1,550 1,566 1,566 1,566   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,380 0,130 1,520 1,535 1,535 1,535   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,620 0,100 0,720 0,727 0,727 0,727   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,080 0,120 1,190 1,202 1,202 1,202   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,140 0,090 1,230 1,242 1,242 1,242   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,750 0,130 1,890 1,909 1,909 1,909   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,510 0,120 1,630 1,646 1,646 1,646   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,510 0,120 1,630 1,646 1,646 1,646   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,600 0,090 2,690 2,717 2,717 2,717   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,470 0,120 1,590 1,606 1,606 1,606   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,230 0,110 1,340 1,353 1,353 1,353   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,360 0,130 1,480 1,495 1,495 1,495   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,640 0,100 0,750 0,758 0,758 0,758   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,760 0,130 0,890 0,899 0,899 0,899   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,520 0,100 0,620 0,626 0,626 0,626   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,500 0,080 0,570 0,576 0,576 0,576   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,320 0,060 0,380 0,384 0,384 0,384   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,040 0,160 1,200 1,212 1,212 1,212   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,570 0,120 0,690 0,697 0,697 0,697   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,010 0,090 1,100 1,111 1,111 1,111   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,520 0,070 0,590 0,596 0,596 0,596   Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066   Serbia Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – – – –   2523 10 00 White clinker – – – – – –   2523 10 00 Grey clinker 1,330 0,060 1,380 1,518 1,656 1,794 (A) 2523 21 00 White Portland cement – – – – – –   2523 29 00 Grey Portland cement 1,310 0,100 1,410 1,551 1,692 1,833   2523 90 00 White hydraulic cements – – – – – –   2523 90 00 Grey hydraulic cements 1,240 0,100 1,350 1,485 1,620 1,755 (A) 2523 30 00 Aluminous cement – – – – – –   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 2,700 0,030 2,730 2,757 2,757 2,757   2814 10 00 Anhydrous ammonia 2,160 0,100 2,260 2,283 2,283 2,283   2814 20 00 Ammonia in aqueous solution 0,650 0,030 0,680 0,687 0,687 0,687   2834 21 00 Nitrate of potassium 2,180 0,050 2,220 2,242 2,242 2,242   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,460 0,020 0,490 0,495 0,495 0,495   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,760 0,020 0,790 0,798 0,798 0,798   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,390 0,080 1,460 1,475 1,475 1,475   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,360 0,070 1,430 1,444 1,444 1,444   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,620 0,060 0,670 0,677 0,677 0,677   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,390 0,060 1,450 1,465 1,465 1,465   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,640 0,050 1,690 1,707 1,707 1,707   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,530 0,070 2,600 2,626 2,626 2,626   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,150 0,070 2,220 2,242 2,242 2,242   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,150 0,070 2,220 2,242 2,242 2,242   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 4,220 0,050 4,270 4,313 4,313 4,313   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,120 0,060 2,180 2,202 2,202 2,202   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,570 0,060 1,630 1,646 1,646 1,646   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,600 0,070 1,660 1,677 1,677 1,677   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,800 0,060 0,860 0,869 0,869 0,869   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,050 0,070 1,120 1,131 1,131 1,131   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,710 0,050 0,760 0,768 0,768 0,768   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,500 0,040 0,540 0,545 0,545 0,545   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,320 0,030 0,350 0,354 0,354 0,354   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,450 0,080 1,530 1,545 1,545 1,545   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,570 0,080 0,650 0,657 0,657 0,657   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,430 0,050 1,480 1,495 1,495 1,495   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,730 0,040 0,760 0,768 0,768 0,768   Aluminium         10 % mark-up 20 % mark-up 30 % mark-up   7601 Unwrought aluminium 0,360 N/A 0,360 0,396 0,432 0,468 (L) 7603 Aluminium powders and flakes 1,513 N/A 1,513 1,664 1,816 1,967 (L) 7604 10 10 Bars and rods 2,238 N/A 2,238 2,462 2,686 2,909 (L) 7604 10 90 Profiles 2,270 N/A 2,270 2,496 2,723 2,950 (L) 7604 21 00 Hollow profiles 2,270 N/A 2,270 2,496 2,723 2,950 (L) 7604 29 10 Bars and rods 2,238 N/A 2,238 2,462 2,686 2,909 (L) 7604 29 90 Profiles 2,270 N/A 2,270 2,496 2,723 2,950 (L) 7605 Aluminium wire 2,238 N/A 2,238 2,462 2,686 2,909 (L) 7606 Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm 3,688 N/A 3,688 4,057 4,426 4,794 (L) 7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm 3,688 N/A 3,688 4,057 4,426 4,794 (L) 7608 Aluminium tubes and pipes 2,270 N/A 2,270 2,496 2,723 2,950 (L) 7609 00 00 Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) 2,270 N/A 2,270 2,496 2,723 2,950 (L) 7610 10 00 Doors, windows and their frames and thresholds for doors 2,270 N/A 2,270 2,496 2,723 2,950 (L) 7610 90 Other 2,270 N/A 2,270 2,496 2,723 2,950 (L) 7610 90 10 Bridges and bridge-sections, towers and lattice masts 2,270 N/A 2,270 2,496 2,723 2,950 (L) 7610 90 90 Other 2,270 N/A 2,270 2,496 2,723 2,950 (L) 7611 00 00 Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 3,688 N/A 3,688 4,057 4,426 4,794 (L) 7612 Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 1,544 N/A 1,544 1,698 1,853 2,007 (L) 7613 00 00 Aluminium containers for compressed or liquefied gas 3,688 N/A 3,688 4,057 4,426 4,794 (L) 7614 Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated 2,238 N/A 2,238 2,462 2,686 2,909 (L) 7616 10 00 Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles 3,688 N/A 3,688 4,057 4,426 4,794 (L) 7616 91 00 Cloth, grill, netting and fencing, of aluminium wire 3,688 N/A 3,688 4,057 4,426 4,794 (L) 7616 99 10 Cast 1,513 N/A 1,513 1,664 1,816 1,967 (L) 7616 99 90 Other 3,688 N/A 3,688 4,057 4,426 4,794 (L) Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066   Iron and steel         10 % mark-up 20 % mark-up 30 % mark-up   2601 12 00 Agglomerated iron ores and concentrates (excl. roasted iron pyrites) 0,120 0,110 0,220 0,242 0,264 0,286   7201 Pig iron and spiegeleisen, in pigs, blocks or other primary forms 2,160 N/A 2,160 2,376 2,592 2,808   7202 11 Ferro-manganese, containing by weight > 2% of carbon 1,690 N/A 1,690 1,859 2,028 2,197   7202 19 Ferro-manganese, containing by weight <= 2% carbon – N/A – – – –   7202 41 Ferro-chromium, containing by weight > 4% of carbon 2,350 N/A 2,350 2,585 2,820 3,055   7202 49 Ferro-chromium, containing by weight <= 4% of carbon – N/A – – – –   7202 60 00 Ferro-nickel – N/A – – – –   7203 Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99,94%, in lumps, pellets or similar forms – N/A – – – –   7205 Granules and powders of pig iron, spiegeleisen, iron or steel (excl. granules and powders of ferro-alloys, turnings and filings of iron or steel, radioactive iron powders "isotopes" and certain low-calibre, substandard balls for ballbearings) 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7206 Iron and non-alloy steel in ingots or other primary forms (excl. remelting scrap ingots, products obtained by continuous casting and iron of heading 7203) see below N/A see below see below see below see below   7206 10 00 Ingots, of iron and non-alloy steel (excl. remelted scrap ingots, continuous cast products, iron of heading 7203) 2,400 N/A 2,400 2,640 2,880 3,120 (C) 7206 90 00 Iron and non-alloy steel, in puddled bars or other primary forms (excl. ingots, remelted scrap ingots, continuous cast products, iron of heading 7203) 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7207 Semi-finished products of iron or non-alloy steel see below N/A see below see below see below see below   7207 11 11 Semi-finished products, of non-alloy free-cutting steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7207 11 14 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness of <= 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel) 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7207 11 16 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness of > 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel) 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7207 11 90 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular cross-section, the width < twice the thickness, forged 2,400 N/A 2,400 2,640 2,880 3,120 (C) 7207 12 10 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtained by continuous casting 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7207 12 90 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular "other than square" cross-section, the width >= twice the thickness, forged 2,400 N/A 2,400 2,640 2,880 3,120 (C) 7207 19 12 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7207 19 19 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, forged 2,400 N/A 2,400 2,640 2,880 3,120 (C) 7207 19 80 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon (excl. semi-products, of square, rectangular, circular or polygonal cross-section) 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7207 20 11 Semi-finished products, of non-alloy free-cutting steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7207 20 15 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% but < 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel) 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7207 20 17 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel) 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7207 20 19 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, forged 2,400 N/A 2,400 2,640 2,880 3,120 (C) 7207 20 32 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtained by continuous casting 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7207 20 39 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of rectangular "other than square" cross-section and the width >= twice the thickness, forged 2,400 N/A 2,400 2,640 2,880 3,120 (C) 7207 20 52 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7207 20 59 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of circular or polygonal cross-section, forged 2,400 N/A 2,400 2,640 2,880 3,120 (C) 7207 20 80 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon (excl. those of square, rectangular, circular or polygonal cross-section) 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7208 Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled, not clad, plated or coated 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7209 Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, cold-rolled "cold-reduced", not clad, plated or coated 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7210 Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7211 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", not clad, plated or coated see below N/A see below see below see below see below   7211 13 00 Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as "wide flats" 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7211 14 00 Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, not further worked than hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm (excl. "wide flats") 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7211 19 00 Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, simply hot-rolled, not clad, plated or coated, of a thickness < 4,75 mm (excl. "wide flats") 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7211 23 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight < 0,25% of carbon 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7211 29 00 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight >= 0,25% of carbon 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7211 90 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked, but not clad, plated or coated 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7212 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated 2,641 N/A 2,641 2,905 3,169 3,433 (C) 7213 Bars and rods of iron or non-alloy steel, hot-rolled, in irregularly wound coils 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7214 Bars and rods, of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but incl. those twisted after rolling (excl. in irregularly wound coils) see below N/A see below see below see below see below   7214 10 00 Bars and rods, of iron or non-alloy steel, not further worked than forged (excl. in irregularly wound coils) 2,400 N/A 2,400 2,640 2,880 3,120 (C) 7214 20 00 Bars and rods, of iron or non-alloy steel, with indentations, ribs, groves or other deformations produced during the rolling process 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7214 30 00 Bars and rods, of non-alloy free-cutting steel, not further worked than hot-rolled, hot-drawn or hot-extruded (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling) 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7214 91 Bars and rods, of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, of rectangular "other than square" cross-section (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process, bars and rods twisted after rolling and free-cutting steel) 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7214 99 Bars and rods, of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded (excl. of rectangular [other than square] cross-section and those containing indentations, ribs, grooves or other deformations produced during the rolling process, and of non-alloy free-cutting steel) 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7215 Bars and rods, of iron or non-alloy steel, cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked, n.e.s. 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7216 Angles, shapes and sections of iron or non-alloy steel, n.e.s. 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7217 Wire of iron or non-alloy steel, in coils (excl. bars and rods) see below N/A see below see below see below see below   7217 10 Wire of iron or non-alloy steel, in coils, not plated or coated, whether or not polished (excl. bars and rods) 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7217 20 Wire of iron or non-alloy steel, in coils, plated or coated with zinc (excl. bars and rods) 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7217 30 Wire of iron or non-alloy steel, in coils, plated or coated with base metals (excl. plated or coated with zinc, and bars and rods) 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7217 90 Wire of iron or non-alloy steel, in coils, plated or coated (excl. plated or coated with base metals, and bars and rods) 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7218 Stainless steel in ingots or other primary forms (excl. remelting scrap ingots and products obtained by continuous casting); semi-finished products of stainless steel see below N/A see below see below see below see below   7218 10 00 Steel, stainless, in ingots and other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) 2,580 N/A 2,580 2,838 3,096 3,354   7218 91 Semi-finished products of stainless steel, of rectangular "other than square" cross-section 2,590 N/A 2,590 2,849 3,108 3,367   7218 99 11 Semi-finished products of stainless steel, of square cross-section, rolled or obtained by continuous casting 2,590 N/A 2,590 2,849 3,108 3,367   7218 99 19 Semi-finished products of stainless steel, of square cross-section, forged 2,580 N/A 2,580 2,838 3,096 3,354   7218 99 20 Semi-finished products of stainless steel, of circular cross-section or of cross-section other than square or rectangular, rolled or obtained by continuous casting 2,590 N/A 2,590 2,849 3,108 3,367   7218 99 80 Semi-finished products of stainless steel, forged (excl. products of square or rectangular cross-section) 2,580 N/A 2,580 2,838 3,096 3,354   7219 Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" see below N/A see below see below see below see below   7219 11 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of > 10 mm 2,590 N/A 2,590 2,849 3,108 3,367   7219 12 Flat-rolled products of stainless steel, of a width of>= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 4,7 mm and <= 10 mm 2,590 N/A 2,590 2,849 3,108 3,367   7219 13 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 3 mm and < 4,75 mm 2,590 N/A 2,590 2,849 3,108 3,367   7219 14 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of < 3 mm 2,590 N/A 2,590 2,849 3,108 3,367   7219 21 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of > 10 mm 2,590 N/A 2,590 2,849 3,108 3,367   7219 22 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 4,75 mm and <= 10 mm 2,590 N/A 2,590 2,849 3,108 3,367   7219 23 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 3 mm and < 4,75 mm 2,590 N/A 2,590 2,849 3,108 3,367   7219 24 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of < 3 mm 2,590 N/A 2,590 2,849 3,108 3,367   7219 31 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 4,75 mm 2,590 N/A 2,590 2,849 3,108 3,367   7219 32 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 3 mm but < 4,75 mm 2,590 N/A 2,590 2,849 3,108 3,367   7219 33 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of > 1 mm but < 3 mm 2,590 N/A 2,590 2,849 3,108 3,367   7219 34 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 0,5 mm but <= 1 mm 2,590 N/A 2,590 2,849 3,108 3,367   7219 35 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of < 0,5 mm 2,590 N/A 2,590 2,849 3,108 3,367   7219 90 Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked 2,590 N/A 2,590 2,849 3,108 3,367   7220 Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" see below N/A see below see below see below see below   7220 11 00 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of >= 4,75 mm 2,590 N/A 2,590 2,849 3,108 3,367   7220 12 00 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of < 4,75 mm 2,590 N/A 2,590 2,849 3,108 3,367   7220 20 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" 2,590 N/A 2,590 2,849 3,108 3,367   7220 90 Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked 2,590 N/A 2,590 2,849 3,108 3,367   7221 Bars and rods of stainless steel, hot-rolled, in irregularly wound coils 2,590 N/A 2,590 2,849 3,108 3,367   7222 Other bars and rods of stainless steel; angles, shapes and sections of stainless steel, n.e.s. see below N/A see below see below see below see below   7222 11 Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only hot-extruded, of circular cross-section 2,590 N/A 2,590 2,849 3,108 3,367   7222 19 Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only extruded (excl. of circular cross-section) 2,590 N/A 2,590 2,849 3,108 3,367   7222 20 Other bars and rods of stainless steel, not further worked than cold-formed or cold-finished 2,590 N/A 2,590 2,849 3,108 3,367   7222 30 Other bars and rods of stainless steel, cold-formed or cold-finished and further worked, or not further worked than forged, or forged, or hot-formed by other means and further worked, n.e.s. 2,580 N/A 2,580 2,838 3,096 3,354   7222 40 Angles, shapes and sections of stainless steel, n.e.s. 2,590 N/A 2,590 2,849 3,108 3,367   7223 Wire of stainless steel, in coils (excl. bars and rods) see below N/A see below see below see below see below   7223 00 Wire of stainless steel, in coils (excl. bars and rods) 2,590 N/A 2,590 2,849 3,108 3,367   7224 Steel, alloy, other than stainless, in ingots or other primary forms, semi-finished products of alloy steel other than stainless (excl. waste and scrap in ingot form, and products obtained by continuous casting) see below N/A see below see below see below see below   7224 10 Steel, alloy, other than stainless, in ingots or other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) 2,550 N/A 2,550 2,805 3,060 3,315 (F) 7224 90 02 Semi-finished products of tool steel 2,560 N/A 2,560 2,816 3,072 3,328 (F) 7224 90 03 Semi-finished products of high-speed steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting the width measuring < twice the thickness 2,560 N/A 2,560 2,816 3,072 3,328 (F) 7224 90 05 Semi-finished products of steel containing by weight <= 0,7% of carbon, 0,5% to 1,2% of manganese, 0,6% to 2,3% of silicon, or of steel containing by weight >= 0,0008% of boron with any other element < the minimum content referred to in Note 1 f to chapter 72, of square or rectangular cross-section, hot rolled or obtained by continuous casting, the width measuring < twice the thickness 2,560 N/A 2,560 2,816 3,072 3,328 (F) 7224 90 07 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring < twice the thickness (excl. of tool steel, high-speed steel and articles of subheading 7224.90.05) 2,560 N/A 2,560 2,816 3,072 3,328 (F) 7224 90 14 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring >= twice the thickness (excl. of tool steel) 2,560 N/A 2,560 2,816 3,072 3,328 (F) 7224 90 18 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, forged (excl. of tool steel) 2,550 N/A 2,550 2,805 3,060 3,315 (F) 7224 90 31 Semi-finished products of steel containing by weight 0,9% to 1,15% carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting 2,560 N/A 2,560 2,816 3,072 3,328 (F) 7224 90 38 Semi-finished products of alloy steel, other than stainless steel, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting (excl. of tool steel and products containing by weight 0,9% to 1,15% of carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum) 2,560 N/A 2,560 2,816 3,072 3,328 (F) 7224 90 90 Semi-finished products of alloy steel, other than stainless steel, forged (excl. of tool steel and products of square or rectangular, circular or polygamol cross-section) 2,550 N/A 2,550 2,805 3,060 3,315 (F) 7225 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" see below N/A see below see below see below see below   7225 11 00 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, grain-oriented 3,390 N/A 3,390 3,729 4,068 4,407 (C) 7225 19 10 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, hot-rolled 2,560 N/A 2,560 2,816 3,072 3,328 (C) 7225 19 90 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, cold-rolled "cold-reduced", non-grain-oriented 2,560 N/A 2,560 2,816 3,072 3,328 (F) 7225 30 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, in coils (excl. products of silicon-electrical steel) 2,560 N/A 2,560 2,816 3,072 3,328 (F) 7225 40 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, not in coils (excl. products of silicon-electrical steel) 2,560 N/A 2,560 2,816 3,072 3,328 (F) 7225 50 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of silicon-electrical steel) 2,560 N/A 2,560 2,816 3,072 3,328 (F) 7225 91 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and electrolytically plated or coated with zinc (excl. products of silicon-electrical steel) 2,560 N/A 2,560 2,816 3,072 3,328 (F) 7225 92 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and plated or coated with zinc (excl. electrolytically plated or coated and products of silicon-electrical steel) 2,560 N/A 2,560 2,816 3,072 3,328 (F) 7225 99 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. plated or coated with zinc and products of silicon-electrical steel) 2,560 N/A 2,560 2,816 3,072 3,328 (F) 7226 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" see below N/A see below see below see below see below   7226 11 00 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", grain-oriented 3,390 N/A 3,390 3,729 4,068 4,407 (C) 7226 19 10 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, not further worked than hot-rolled 2,560 N/A 2,560 2,816 3,072 3,328 (C) 7226 19 80 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, cold-rolled "cold-reduced", whether or not further worked, or hot-rolled and further worked, non-grain-oriented 2,560 N/A 2,560 2,816 3,072 3,328 (F) 7226 20 00 Flat-rolled products of high-speed steel, of a width of <= 600 mm, hot-rolled or cold-rolled "cold-reduced" 2,560 N/A 2,560 2,816 3,072 3,328 (F) 7226 91 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than hot-rolled (excl. products of high-speed steel or silicon-electrical steel) 2,560 N/A 2,560 2,816 3,072 3,328 (F) 7226 92 00 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of high-speed steel or silicon-electrical steel) 2,560 N/A 2,560 2,816 3,072 3,328 (F) 7226 99 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. products of high-speed steel or silicon-electrical steel) 2,560 N/A 2,560 2,816 3,072 3,328 (F) 7227 Bars and rods of alloy steel other than stainless, hot-rolled, in irregularly wound coils 2,560 N/A 2,560 2,816 3,072 3,328 (C)/(F) 7228 Other bars and rods of alloy steel other than stainless, angles, shapes and sections of alloy steel other than stainless, n.e.s.; hollow drill bars and rods, of alloy or non-alloy steel see below N/A see below see below see below see below   7228 10 20 Bars and rods of high-speed steel, not further worked than hot-rolled, hot-drawn or extruded, and hot-rolled, hot-drawn or extruded, not further worked than clad (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 2,560 N/A 2,560 2,816 3,072 3,328 (F) 7228 10 50 Bars and rods of high-speed steel, forged (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 2,550 N/A 2,550 2,805 3,060 3,315 (F) 7228 10 90 Bars and rods of high-speed steel, not further worked than cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked (excl. forged products, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 2,560 N/A 2,560 2,816 3,072 3,328 (F) 7228 20 Bars and rods of silico-manganese steel (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 2,560 N/A 2,560 2,816 3,072 3,328 (F) 7228 30 Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 2,560 N/A 2,560 2,816 3,072 3,328 (C)/(F) 7228 40 Bars and rods of alloy steel other than stainless, not further worked than forged (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 2,550 N/A 2,550 2,805 3,060 3,315 (F) 7228 50 Bars and rods of alloy steel other than stainless, not further worked than cold-formed or cold-finished (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 2,560 N/A 2,560 2,816 3,072 3,328 (C)/(F) 7228 60 Bars and rods of alloy steel other than stainless, cold-formed or cold-finished and further worked or hot-formed and further worked, n.e.s. (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 2,560 N/A 2,560 2,816 3,072 3,328 (F) 7228 70 Angles, shapes and sections of alloy steel other than stainless, n.e.s. 2,560 N/A 2,560 2,816 3,072 3,328 (F) 7228 80 00 Hollow drill bars and rods, of alloy or non-alloy steel 2,560 N/A 2,560 2,816 3,072 3,328 (F) 7229 Wire of alloy steel other than stainless, in coils (excl. bars and rods) 2,560 N/A 2,560 2,816 3,072 3,328 (C)/(F) 7301 Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7302 Railway or tramway track construction material of iron or steel, the following : rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers "cross-ties", fish-plates, chairs, chair wedges, sole plates "base plates", rail clips, bedplates, ties and other material specialised for jointing or fixing rails 2,460 N/A 2,460 2,706 2,952 3,198 (C) 7303 Tubes, pipes and hollow profiles, of cast iron see below N/A see below see below see below see below   7303 00 Tubes, pipes and hollow profiles, of cast iron 2,230 N/A 2,230 2,453 2,676 2,899   7304 Tubes, pipes and hollow profiles, seamless, of iron or steel (excl. products of cast iron) see below N/A see below see below see below see below   7304 11 00 Line pipe of a kind used for oil or gas pipelines, seamless, of stainless steel 2,590 N/A 2,590 2,849 3,108 3,367   7304 19 Line pipe of a kind used for oil or gas pipelines, seamless, of iron or steel (excl. products of stainless steel or of cast iron) 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7304 22 00 Drill pipe, seamless, of stainless steel, of a kind used in drilling for oil or gas 2,590 N/A 2,590 2,849 3,108 3,367   7304 23 00 Drill pipe, seamless, of a kind used in drilling for oil or gas, of iron or steel (excl. products of stainless steel or of cast iron) 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7304 24 00 Casing and tubing, seamless, of a kind used for drilling for oil or gas, of stainless steel 2,590 N/A 2,590 2,849 3,108 3,367   7304 29 Casing and tubing, seamless, of iron or steel, of a kind used in drilling for oil or gas (excl. products of cast iron) 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7304 31 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" (excl. cast iron products and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used for drilling for oil or gas) 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7304 39 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, not cold-drawn or cold-rolled "cold-reduced" (excl. cast iron products, line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas) 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7304 41 00 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas) 2,590 N/A 2,590 2,849 3,108 3,367   7304 49 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines or of a kind used for drilling for oil or gas) 2,590 N/A 2,590 2,849 3,108 3,367   7304 51 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil) 2,310 N/A 2,310 2,541 2,772 3,003 (F) 7304 59 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil) 2,310 N/A 2,310 2,541 2,772 3,003 (C)/(F) 7304 90 00 Tubes, pipes and hollow profiles, seamless, of non-circular cross-section, of iron or steel (excl. products of cast iron) 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7305 Tubes and pipes, having circular cross-sections and an external diameter of > 406,4 mm, of flat-rolled products of iron or steel "e.g., welded, riveted or similarly closed" 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7306 Tubes, pipes and hollow profiles "e.g., open seam or welded, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless tubes and pipes and tubes having internal and external circular cross-sections and an external diameter of > 406,4 mm) see below N/A see below see below see below see below   7306 11 00 Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm 2,590 N/A 2,590 2,849 3,108 3,367   7306 19 00 Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron) 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7306 21 00 Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm 2,590 N/A 2,590 2,849 3,108 3,367   7306 29 00 Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron) 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7306 30 12 Precision tubes, welded, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7306 30 18 Precision tubes, welded, of circular cross-section, of iron or non-alloy steel (excl. cold-drawn or cold-rolled) 2,410 N/A 2,410 2,651 2,892 3,133   7306 30 41 Threaded or threadable tubes "gas pipe", welded, of circular cross-section, of iron or non-alloy steel, plated or coated with zinc 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7306 30 49 Threaded or threadable tubes "gas pipe", welded, of circular cross-section, of iron or non-alloy steel (excl. products plated or coated with zinc) 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7306 30 72 Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel, of an external diameter of <= 168,3 mm, plated or coated with zinc (excl. line pipe of a kind used for oil or gas pipelines or casing and tubingof a kind used in drilling for oil or gas) 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7306 30 77 Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel of an external diameter of <= 168,3 mm (excl. plated or coated with zinc and line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used in drilling for oil or gas, precision tubes and threaded or threadable tubes "gas pipe") 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7306 30 80 Tubes, pipes and hollow profiles, welded, having a circular cross-section, of iron or steel, of an external diameter of > 168,3 mm but <= 406,4 mm (excl. line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, or precision steel tubes, electrical conduit tubes or threaded or threadable tubes "gas pipe") 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7306 40 20 Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. products having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) 2,590 N/A 2,590 2,849 3,108 3,367   7306 40 80 Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel (excl. products cold-drawn or cold-rolled "cold-reduced", tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) 2,590 N/A 2,590 2,849 3,108 3,367   7306 50 21 Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" 2,320 N/A 2,320 2,552 2,784 3,016 (F) 7306 50 29 Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless (excl. cold-drawn or cold-rolled) 2,320 N/A 2,320 2,552 2,784 3,016 (F) 7306 50 80 Tubes, pipes and hollow profiles, welded, of circular cross-section, of alloy steel other than stainless (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and precision steel tubes) 2,320 N/A 2,320 2,552 2,784 3,016 (F) 7306 61 10 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel 2,590 N/A 2,590 2,849 3,108 3,367   7306 61 92 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of <= 2 mm 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7306 61 99 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of > 2 mm 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7306 69 10 Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) 2,590 N/A 2,590 2,849 3,108 3,367   7306 69 90 Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of iron or steel other than stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7306 90 00 Tubes, pipes and hollow profiles "e.g., open seam, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless or welded tubes and pipes and tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm) 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7307 Tube or pipe fittings "e.g. couplings, elbows, sleeves", of iron or steel see below N/A see below see below see below see below   7307 11 Tube or pipe fittings of non-malleable cast iron 2,220 N/A 2,220 2,442 2,664 2,886   7307 19 10 Tube or pipe fittings of cast iron (excl. of non-malleable) 2,220 N/A 2,220 2,442 2,664 2,886   7307 19 90 Cast tube or pipe fittings of steel 2,400 N/A 2,400 2,640 2,880 3,120 (C) 7307 21 00 Flanges of stainless steel (excl. cast products) 2,480 N/A 2,480 2,728 2,976 3,224   7307 22 Threaded elbows, bends and sleeves of stainless steel (excl. cast products) 2,480 N/A 2,480 2,728 2,976 3,224   7307 23 Butt welding tube or pipe fittings of stainless steel (excl. cast products) 2,480 N/A 2,480 2,728 2,976 3,224   7307 29 Tube or pipe fittings of stainless steel (excl. cast products, flanges, threaded elbows, bends and sleeves and butt weldings fittings) 2,480 N/A 2,480 2,728 2,976 3,224   7307 91 00 Flanges of iron or steel (excl. cast or stainless products) 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7307 92 Threaded elbows, bends and sleeves, of stainless steel (excl. cast or stainless products) 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7307 93 Butt welding fittings of iron or steel (excl. cast iron or stainless steel products, and flanges) 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7307 99 Tube or pipe fittings, of iron or steel (excl. cast iron or stainless steel products; flanges; threaded elbows, bends and sleeves; butt welding fittings) 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7308 Structures and parts of structures "e.g., bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns", of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel (excl. prefabricated buildings of heading 9406) 2,480 N/A 2,480 2,728 2,976 3,224 (C) 7309 Reservoirs, tanks, vats and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of > 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated (excl. containers specifically constructed or equipped for one or more types of transport) 2,510 N/A 2,510 2,761 3,012 3,263 (C) 7310 Tanks, casks, drums, cans, boxes and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of <= 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated, n.e.s. 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7311 Containers of iron or steel, for compressed or liquefied gas (excl. containers specifically constructed or equipped for one or more types of transport) see below N/A see below see below see below see below   7311 00 Containers of iron or steel, for compressed or liquefied gas (excl. containers specifically constructed or equipped for one or more types of transport) 2,510 N/A 2,510 2,761 3,012 3,263 (C) 7318 Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers, incl. spring washers, and similar articles, of iron or steel (excl. lag screws, stoppers, plugs and the like, threaded) see below N/A see below see below see below see below   7318 11 00 Coach screws of iron or steel 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7318 12 10 Wood screws of stainless steel (excl. coach screws) 2,590 N/A 2,590 2,849 3,108 3,367 (C) 7318 12 90 Wood screws of iron or steel other than stainless (excl. coach screws) 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7318 13 00 Screw hooks and screw rings, of iron or steel 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7318 14 10 Self-tapping screws, of stainless steel (excl. wood screws) 2,590 N/A 2,590 2,849 3,108 3,367 (C) 7318 14 91 Spaced-thread screws of iron or steel other than stainless 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7318 14 99 Self-tapping screws of iron or steel other than stainless (excl. spaced-thread screws and wood screws) 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7318 15 Threaded screws and bolts, of iron or steel, whether or not with their nuts and washers (excl. coach screws and other wood screws, screw hooks and screw rings, self-tapping screws, lag screws, stoppers, plugs and the like, threaded) 2,440 N/A 2,440 2,684 2,928 3,172 (C) 7318 16 Nuts of iron or steel 2,440 N/A 2,440 2,684 2,928 3,172 (C) 7318 19 00 Threaded articles, of iron or steel, n.e.s. 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7318 21 00 Spring washers and other lock washers, of iron or steel 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7318 22 00 Washers of iron or steel (excl. spring washers and other lock washers) 2,450 N/A 2,450 2,695 2,940 3,185 (C) 7318 23 00 Rivets of iron or steel (excl. tubular and bifurcated rivets for particular uses) 2,420 N/A 2,420 2,662 2,904 3,146 (C) 7318 24 00 Cotters and cotter pins, of iron or steel 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7318 29 00 Non-threaded articles, of iron or steel 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7326 Articles of iron or steel, n.e.s. (excl. cast articles) see below N/A see below see below see below see below   7326 11 00 Grinding balls and similar articles for mills, of iron or steel, forged or stamped, but not further worked 2,400 N/A 2,400 2,640 2,880 3,120 (C) 7326 19 Articles of iron or steel, forged or stamped, but not further worked, n.e.s. (excl. grinding balls and similar articles for mills) 2,400 N/A 2,400 2,640 2,880 3,120 (C) 7326 20 00 Articles of iron or steel wire, n.e.s. 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7326 90 30 Ladders and steps, of iron or steel 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7326 90 40 Pallets and similar platforms for handling goods, of iron or steel 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7326 90 50 Reels for cables, piping and the like, of iron or steel 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7326 90 60 Ventilators, non-mechanical, guttering, hooks and like articles used in the building industry, n.e.s., of iron or steel 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7326 90 92 Articles of iron or steel, open-die forged, n.e.s. 2,400 N/A 2,400 2,640 2,880 3,120 (C) 7326 90 94 Articles of iron or steel, closed-die forged, n.e.s. 2,400 N/A 2,400 2,640 2,880 3,120 (C) 7326 90 96 Sintered articles of iron or steel, n.e.s. 2,400 N/A 2,400 2,640 2,880 3,120 (C) 7326 90 98 Articles of iron or steel, n.e.s. 2,410 N/A 2,410 2,651 2,892 3,133 (C) Sierra Leone Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066   Singapore Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – – – –   2523 10 00 White clinker – – – – – –   2523 10 00 Grey clinker – – – – – –   2523 21 00 White Portland cement – – – – – –   2523 29 00 Grey Portland cement 1,030 0,060 1,090 1,199 1,308 1,417   2523 90 00 White hydraulic cements – – – – – –   2523 90 00 Grey hydraulic cements 0,990 0,060 1,050 1,155 1,260 1,365 (A) 2523 30 00 Aluminous cement – – – – – –   Aluminium         10 % mark-up 20 % mark-up 30 % mark-up   7601 Unwrought aluminium 0,360 N/A 0,360 0,396 0,432 0,468 (L) 7603 Aluminium powders and flakes 1,780 N/A 1,780 1,958 2,136 2,314 (L) 7604 10 10 Bars and rods 2,010 N/A 2,010 2,211 2,412 2,613 (L) 7604 10 90 Profiles 2,020 N/A 2,020 2,222 2,424 2,626 (L) 7604 21 00 Hollow profiles 2,020 N/A 2,020 2,222 2,424 2,626 (L) 7604 29 10 Bars and rods 2,010 N/A 2,010 2,211 2,412 2,613 (L) 7604 29 90 Profiles 2,020 N/A 2,020 2,222 2,424 2,626 (L) 7605 Aluminium wire 2,010 N/A 2,010 2,211 2,412 2,613 (L) 7606 Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm 2,460 N/A 2,460 2,706 2,952 3,198 (L) 7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm 2,460 N/A 2,460 2,706 2,952 3,198 (L) 7608 Aluminium tubes and pipes 2,020 N/A 2,020 2,222 2,424 2,626 (L) 7609 00 00 Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) 2,020 N/A 2,020 2,222 2,424 2,626 (L) 7610 10 00 Doors, windows and their frames and thresholds for doors 2,020 N/A 2,020 2,222 2,424 2,626 (L) 7610 90 Other 2,020 N/A 2,020 2,222 2,424 2,626 (L) 7610 90 10 Bridges and bridge-sections, towers and lattice masts 2,020 N/A 2,020 2,222 2,424 2,626 (L) 7610 90 90 Other 2,020 N/A 2,020 2,222 2,424 2,626 (L) 7611 00 00 Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 2,460 N/A 2,460 2,706 2,952 3,198 (L) 7612 Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 2,460 N/A 2,460 2,706 2,952 3,198 (L) 7613 00 00 Aluminium containers for compressed or liquefied gas 2,460 N/A 2,460 2,706 2,952 3,198 (L) 7614 Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated 2,010 N/A 2,010 2,211 2,412 2,613 (L) 7616 10 00 Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles 2,460 N/A 2,460 2,706 2,952 3,198 (L) 7616 91 00 Cloth, grill, netting and fencing, of aluminium wire 2,460 N/A 2,460 2,706 2,952 3,198 (L) 7616 99 10 Cast 1,780 N/A 1,780 1,958 2,136 2,314 (L) 7616 99 90 Other 2,460 N/A 2,460 2,706 2,952 3,198 (L) Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 14,030 N/A 14,030 15,433 16,836 18,239   Iron and steel         10 % mark-up 20 % mark-up 30 % mark-up   7202 11 Ferro-manganese, containing by weight > 2% of carbon 1,690 N/A 1,690 1,859 2,028 2,197   7202 19 Ferro-manganese, containing by weight <= 2% carbon _ _ _ _ _ _   7202 41 Ferro-chromium, containing by weight > 4% of carbon 2,350 N/A 2,350 2,585 2,820 3,055   7202 49 Ferro-chromium, containing by weight <= 4% of carbon _ _ _ _ _ _   7202 60 00 Ferro-nickel 3,480 N/A 3,480 3,828 4,176 4,524   South Africa Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 2,020 0,080 2,100 2,121 2,121 2,121   2814 10 00 Anhydrous ammonia 3,390 0,250 3,640 3,676 3,676 3,676   2814 20 00 Ammonia in aqueous solution 1,020 0,070 1,090 1,101 1,101 1,101   2834 21 00 Nitrate of potassium 1,950 0,120 2,070 2,091 2,091 2,091   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,720 0,060 0,780 0,788 0,788 0,788   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 1,190 0,060 1,260 1,273 1,273 1,273   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 2,160 0,200 2,360 2,384 2,384 2,384   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 2,120 0,190 2,310 2,333 2,333 2,333   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,970 0,150 1,120 1,131 1,131 1,131   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,500 0,170 1,670 1,687 1,687 1,687   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,490 0,130 1,620 1,636 1,636 1,636   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,300 0,190 2,490 2,515 2,515 2,515   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,970 0,180 2,150 2,172 2,172 2,172   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,970 0,180 2,150 2,172 2,172 2,172   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 3,140 0,130 3,270 3,303 3,303 3,303   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,930 0,170 2,100 2,121 2,121 2,121   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,710 0,150 1,860 1,879 1,879 1,879   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,950 0,180 2,140 2,161 2,161 2,161   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,910 0,150 1,060 1,071 1,071 1,071   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,020 0,180 1,200 1,212 1,212 1,212   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,700 0,140 0,840 0,848 0,848 0,848   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,790 0,110 0,900 0,909 0,909 0,909   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,500 0,090 0,590 0,596 0,596 0,596   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,380 0,220 1,600 1,616 1,616 1,616   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,900 0,180 1,070 1,081 1,081 1,081   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,340 0,140 1,480 1,495 1,495 1,495   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,690 0,100 0,790 0,798 0,798 0,798   Aluminium         10 % mark-up 20 % mark-up 30 % mark-up   7601 Unwrought aluminium 2,358 N/A 2,358 2,594 2,830 3,066 (K) 7603 Aluminium powders and flakes 1,990 N/A 1,990 2,189 2,388 2,587 (K) 7604 10 10 Bars and rods 2,210 N/A 2,210 2,431 2,652 2,873 (K) 7604 10 90 Profiles 2,230 N/A 2,230 2,453 2,676 2,899 (K) 7604 21 00 Hollow profiles 2,230 N/A 2,230 2,453 2,676 2,899 (K) 7604 29 10 Bars and rods 2,210 N/A 2,210 2,431 2,652 2,873 (K) 7604 29 90 Profiles 2,230 N/A 2,230 2,453 2,676 2,899 (K) 7605 Aluminium wire 2,210 N/A 2,210 2,431 2,652 2,873 (K) 7606 Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm 2,670 N/A 2,670 2,937 3,204 3,471 (K) 7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm 2,670 N/A 2,670 2,937 3,204 3,471 (K) 7608 Aluminium tubes and pipes 2,230 N/A 2,230 2,453 2,676 2,899 (K) 7609 00 00 Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) 2,230 N/A 2,230 2,453 2,676 2,899 (K) 7610 10 00 Doors, windows and their frames and thresholds for doors 2,230 N/A 2,230 2,453 2,676 2,899 (K) 7610 90 Other 2,230 N/A 2,230 2,453 2,676 2,899 (K) 7610 90 10 Bridges and bridge-sections, towers and lattice masts 2,230 N/A 2,230 2,453 2,676 2,899 (K) 7610 90 90 Other 2,230 N/A 2,230 2,453 2,676 2,899 (K) 7611 00 00 Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 2,670 N/A 2,670 2,937 3,204 3,471 (K) 7612 Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 2,670 N/A 2,670 2,937 3,204 3,471 (K) 7613 00 00 Aluminium containers for compressed or liquefied gas 2,670 N/A 2,670 2,937 3,204 3,471 (K) 7614 Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated 2,210 N/A 2,210 2,431 2,652 2,873 (K) 7616 10 00 Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles 2,670 N/A 2,670 2,937 3,204 3,471 (K) 7616 91 00 Cloth, grill, netting and fencing, of aluminium wire 2,670 N/A 2,670 2,937 3,204 3,471 (K) 7616 99 10 Cast 1,990 N/A 1,990 2,189 2,388 2,587 (K) 7616 99 90 Other 2,670 N/A 2,670 2,937 3,204 3,471 (K) Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 25,940 N/A 25,940 28,534 31,128 33,722   Iron and steel         10 % mark-up 20 % mark-up 30 % mark-up   2601 12 00 Agglomerated iron ores and concentrates (excl. roasted iron pyrites) – – – – – –   7201 Pig iron and spiegeleisen, in pigs, blocks or other primary forms 3,470 N/A 3,470 3,817 4,164 4,511   7202 11 Ferro-manganese, containing by weight > 2% of carbon 1,690 N/A 1,690 1,859 2,028 2,197   7202 19 Ferro-manganese, containing by weight <= 2% carbon – N/A – – – –   7202 41 Ferro-chromium, containing by weight > 4% of carbon 2,350 N/A 2,350 2,585 2,820 3,055   7202 49 Ferro-chromium, containing by weight <= 4% of carbon 2,870 N/A 2,870 3,157 3,444 3,731   7202 60 00 Ferro-nickel 3,480 N/A 3,480 3,828 4,176 4,524   7203 Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99,94%, in lumps, pellets or similar forms 0,760 N/A 0,760 0,836 0,912 0,988   7205 Granules and powders of pig iron, spiegeleisen, iron or steel (excl. granules and powders of ferro-alloys, turnings and filings of iron or steel, radioactive iron powders "isotopes" and certain low-calibre, substandard balls for ballbearings) 3,890 N/A 3,890 4,279 4,668 5,057 (C) 7206 Iron and non-alloy steel in ingots or other primary forms (excl. remelting scrap ingots, products obtained by continuous casting and iron of heading 7203) see below N/A see below see below see below see below   7206 10 00 Ingots, of iron and non-alloy steel (excl. remelted scrap ingots, continuous cast products, iron of heading 7203) 4,020 N/A 4,020 4,422 4,824 5,226 (C) 7206 90 00 Iron and non-alloy steel, in puddled bars or other primary forms (excl. ingots, remelted scrap ingots, continuous cast products, iron of heading 7203) 4,030 N/A 4,030 4,433 4,836 5,239 (C) 7207 Semi-finished products of iron or non-alloy steel see below N/A see below see below see below see below   7207 11 11 Semi-finished products, of non-alloy free-cutting steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting 4,030 N/A 4,030 4,433 4,836 5,239 (C) 7207 11 14 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness of <= 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel) 4,030 N/A 4,030 4,433 4,836 5,239 (C) 7207 11 16 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness of > 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel) 4,030 N/A 4,030 4,433 4,836 5,239 (C) 7207 11 90 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular cross-section, the width < twice the thickness, forged 4,020 N/A 4,020 4,422 4,824 5,226 (C) 7207 12 10 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtained by continuous casting 4,030 N/A 4,030 4,433 4,836 5,239 (C) 7207 12 90 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular "other than square" cross-section, the width >= twice the thickness, forged 4,020 N/A 4,020 4,422 4,824 5,226 (C) 7207 19 12 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting 4,030 N/A 4,030 4,433 4,836 5,239 (C) 7207 19 19 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, forged 4,020 N/A 4,020 4,422 4,824 5,226 (C) 7207 19 80 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon (excl. semi-products, of square, rectangular, circular or polygonal cross-section) 4,030 N/A 4,030 4,433 4,836 5,239 (C) 7207 20 11 Semi-finished products, of non-alloy free-cutting steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting 4,030 N/A 4,030 4,433 4,836 5,239 (C) 7207 20 15 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% but < 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel) 4,030 N/A 4,030 4,433 4,836 5,239 (C) 7207 20 17 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel) 4,030 N/A 4,030 4,433 4,836 5,239 (C) 7207 20 19 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, forged 4,020 N/A 4,020 4,422 4,824 5,226 (C) 7207 20 32 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtained by continuous casting 4,030 N/A 4,030 4,433 4,836 5,239 (C) 7207 20 39 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of rectangular "other than square" cross-section and the width >= twice the thickness, forged 4,020 N/A 4,020 4,422 4,824 5,226 (C) 7207 20 52 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting 4,030 N/A 4,030 4,433 4,836 5,239 (C) 7207 20 59 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of circular or polygonal cross-section, forged 4,020 N/A 4,020 4,422 4,824 5,226 (C) 7207 20 80 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon (excl. those of square, rectangular, circular or polygonal cross-section) 4,030 N/A 4,030 4,433 4,836 5,239 (C) 7208 Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled, not clad, plated or coated 4,140 N/A 4,140 4,554 4,968 5,382 (C) 7209 Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, cold-rolled "cold-reduced", not clad, plated or coated 4,220 N/A 4,220 4,642 5,064 5,486 (C) 7210 Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated 4,220 N/A 4,220 4,642 5,064 5,486 (C) 7211 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", not clad, plated or coated see below N/A see below see below see below see below   7211 13 00 Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as "wide flats" 4,140 N/A 4,140 4,554 4,968 5,382 (C) 7211 14 00 Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, not further worked than hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm (excl. "wide flats") 4,140 N/A 4,140 4,554 4,968 5,382 (C) 7211 19 00 Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, simply hot-rolled, not clad, plated or coated, of a thickness < 4,75 mm (excl. "wide flats") 4,140 N/A 4,140 4,554 4,968 5,382 (C) 7211 23 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight < 0,25% of carbon 4,220 N/A 4,220 4,642 5,064 5,486 (C) 7211 29 00 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight >= 0,25% of carbon 4,220 N/A 4,220 4,642 5,064 5,486 (C) 7211 90 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked, but not clad, plated or coated 4,220 N/A 4,220 4,642 5,064 5,486 (C) 7212 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated 4,220 N/A 4,220 4,642 5,064 5,486 (C) 7213 Bars and rods of iron or non-alloy steel, hot-rolled, in irregularly wound coils 4,030 N/A 4,030 4,433 4,836 5,239 (C) 7214 Bars and rods, of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but incl. those twisted after rolling (excl. in irregularly wound coils) see below N/A see below see below see below see below   7214 10 00 Bars and rods, of iron or non-alloy steel, not further worked than forged (excl. in irregularly wound coils) 4,020 N/A 4,020 4,422 4,824 5,226 (C) 7214 20 00 Bars and rods, of iron or non-alloy steel, with indentations, ribs, groves or other deformations produced during the rolling process 4,030 N/A 4,030 4,433 4,836 5,239 (C) 7214 30 00 Bars and rods, of non-alloy free-cutting steel, not further worked than hot-rolled, hot-drawn or hot-extruded (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling) 4,030 N/A 4,030 4,433 4,836 5,239 (C) 7214 91 Bars and rods, of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, of rectangular "other than square" cross-section (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process, bars and rods twisted after rolling and free-cutting steel) 4,030 N/A 4,030 4,433 4,836 5,239 (C) 7214 99 Bars and rods, of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded (excl. of rectangular [other than square] cross-section and those containing indentations, ribs, grooves or other deformations produced during the rolling process, and of non-alloy free-cutting steel) 4,030 N/A 4,030 4,433 4,836 5,239 (C) 7215 Bars and rods, of iron or non-alloy steel, cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked, n.e.s. 4,030 N/A 4,030 4,433 4,836 5,239 (C) 7216 Angles, shapes and sections of iron or non-alloy steel, n.e.s. 4,030 N/A 4,030 4,433 4,836 5,239 (C) 7217 Wire of iron or non-alloy steel, in coils (excl. bars and rods) see below N/A see below see below see below see below   7217 10 Wire of iron or non-alloy steel, in coils, not plated or coated, whether or not polished (excl. bars and rods) 4,030 N/A 4,030 4,433 4,836 5,239 (C) 7217 20 Wire of iron or non-alloy steel, in coils, plated or coated with zinc (excl. bars and rods) 4,030 N/A 4,030 4,433 4,836 5,239 (C) 7217 30 Wire of iron or non-alloy steel, in coils, plated or coated with base metals (excl. plated or coated with zinc, and bars and rods) 4,030 N/A 4,030 4,433 4,836 5,239 (C) 7217 90 Wire of iron or non-alloy steel, in coils, plated or coated (excl. plated or coated with base metals, and bars and rods) 4,030 N/A 4,030 4,433 4,836 5,239 (C) 7218 Stainless steel in ingots or other primary forms (excl. remelting scrap ingots and products obtained by continuous casting); semi-finished products of stainless steel see below N/A see below see below see below see below   7218 10 00 Steel, stainless, in ingots and other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) 3,620 N/A 3,620 3,982 4,344 4,706   7218 91 Semi-finished products of stainless steel, of rectangular "other than square" cross-section 3,810 N/A 3,810 4,191 4,572 4,953   7218 99 11 Semi-finished products of stainless steel, of square cross-section, rolled or obtained by continuous casting 3,810 N/A 3,810 4,191 4,572 4,953   7218 99 19 Semi-finished products of stainless steel, of square cross-section, forged 3,620 N/A 3,620 3,982 4,344 4,706   7218 99 20 Semi-finished products of stainless steel, of circular cross-section or of cross-section other than square or rectangular, rolled or obtained by continuous casting 3,810 N/A 3,810 4,191 4,572 4,953   7218 99 80 Semi-finished products of stainless steel, forged (excl. products of square or rectangular cross-section) 3,620 N/A 3,620 3,982 4,344 4,706   7219 Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" see below N/A see below see below see below see below   7219 11 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of > 10 mm 3,810 N/A 3,810 4,191 4,572 4,953   7219 12 Flat-rolled products of stainless steel, of a width of>= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 4,7 mm and <= 10 mm 3,810 N/A 3,810 4,191 4,572 4,953   7219 13 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 3 mm and < 4,75 mm 3,810 N/A 3,810 4,191 4,572 4,953   7219 14 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of < 3 mm 3,810 N/A 3,810 4,191 4,572 4,953   7219 21 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of > 10 mm 3,810 N/A 3,810 4,191 4,572 4,953   7219 22 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 4,75 mm and <= 10 mm 3,810 N/A 3,810 4,191 4,572 4,953   7219 23 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 3 mm and < 4,75 mm 3,810 N/A 3,810 4,191 4,572 4,953   7219 24 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of < 3 mm 3,810 N/A 3,810 4,191 4,572 4,953   7219 31 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 4,75 mm 3,890 N/A 3,890 4,279 4,668 5,057   7219 32 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 3 mm but < 4,75 mm 3,890 N/A 3,890 4,279 4,668 5,057   7219 33 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of > 1 mm but < 3 mm 3,890 N/A 3,890 4,279 4,668 5,057   7219 34 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 0,5 mm but <= 1 mm 3,890 N/A 3,890 4,279 4,668 5,057   7219 35 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of < 0,5 mm 3,890 N/A 3,890 4,279 4,668 5,057   7219 90 Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked 3,890 N/A 3,890 4,279 4,668 5,057   7220 Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" see below N/A see below see below see below see below   7220 11 00 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of >= 4,75 mm 3,810 N/A 3,810 4,191 4,572 4,953   7220 12 00 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of < 4,75 mm 3,810 N/A 3,810 4,191 4,572 4,953   7220 20 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" 3,890 N/A 3,890 4,279 4,668 5,057   7220 90 Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked 3,890 N/A 3,890 4,279 4,668 5,057   7221 Bars and rods of stainless steel, hot-rolled, in irregularly wound coils 3,620 N/A 3,620 3,982 4,344 4,706   7222 Other bars and rods of stainless steel; angles, shapes and sections of stainless steel, n.e.s. see below N/A see below see below see below see below   7222 11 Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only hot-extruded, of circular cross-section 3,620 N/A 3,620 3,982 4,344 4,706   7222 19 Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only extruded (excl. of circular cross-section) 3,620 N/A 3,620 3,982 4,344 4,706   7222 20 Other bars and rods of stainless steel, not further worked than cold-formed or cold-finished 3,620 N/A 3,620 3,982 4,344 4,706   7222 30 Other bars and rods of stainless steel, cold-formed or cold-finished and further worked, or not further worked than forged, or forged, or hot-formed by other means and further worked, n.e.s. 3,620 N/A 3,620 3,982 4,344 4,706   7222 40 Angles, shapes and sections of stainless steel, n.e.s. 3,620 N/A 3,620 3,982 4,344 4,706   7223 Wire of stainless steel, in coils (excl. bars and rods) see below N/A see below see below see below see below   7223 00 Wire of stainless steel, in coils (excl. bars and rods) 3,620 N/A 3,620 3,982 4,344 4,706   7224 Steel, alloy, other than stainless, in ingots or other primary forms, semi-finished products of alloy steel other than stainless (excl. waste and scrap in ingot form, and products obtained by continuous casting) see below N/A see below see below see below see below   7224 10 Steel, alloy, other than stainless, in ingots or other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) 3,890 N/A 3,890 4,279 4,668 5,057 (F) 7224 90 02 Semi-finished products of tool steel 4,080 N/A 4,080 4,488 4,896 5,304 (F) 7224 90 03 Semi-finished products of high-speed steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting the width measuring < twice the thickness 4,080 N/A 4,080 4,488 4,896 5,304 (F) 7224 90 05 Semi-finished products of steel containing by weight <= 0,7% of carbon, 0,5% to 1,2% of manganese, 0,6% to 2,3% of silicon, or of steel containing by weight >= 0,0008% of boron with any other element < the minimum content referred to in Note 1 f to chapter 72, of square or rectangular cross-section, hot rolled or obtained by continuous casting, the width measuring < twice the thickness 4,080 N/A 4,080 4,488 4,896 5,304 (F) 7224 90 07 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring < twice the thickness (excl. of tool steel, high-speed steel and articles of subheading 7224.90.05) 4,080 N/A 4,080 4,488 4,896 5,304 (F) 7224 90 14 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring >= twice the thickness (excl. of tool steel) 4,080 N/A 4,080 4,488 4,896 5,304 (F) 7224 90 18 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, forged (excl. of tool steel) 3,890 N/A 3,890 4,279 4,668 5,057 (F) 7224 90 31 Semi-finished products of steel containing by weight 0,9% to 1,15% carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting 4,080 N/A 4,080 4,488 4,896 5,304 (F) 7224 90 38 Semi-finished products of alloy steel, other than stainless steel, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting (excl. of tool steel and products containing by weight 0,9% to 1,15% of carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum) 4,080 N/A 4,080 4,488 4,896 5,304 (F) 7224 90 90 Semi-finished products of alloy steel, other than stainless steel, forged (excl. of tool steel and products of square or rectangular, circular or polygamol cross-section) 3,890 N/A 3,890 4,279 4,668 5,057 (F) 7225 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" see below N/A see below see below see below see below   7225 11 00 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, grain-oriented 5,340 N/A 5,340 5,874 6,408 6,942 (C) 7225 19 10 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, hot-rolled 4,080 N/A 4,080 4,488 4,896 5,304 (C) 7225 19 90 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, cold-rolled "cold-reduced", non-grain-oriented 4,160 N/A 4,160 4,576 4,992 5,408 (F) 7225 30 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, in coils (excl. products of silicon-electrical steel) 4,080 N/A 4,080 4,488 4,896 5,304 (F) 7225 40 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, not in coils (excl. products of silicon-electrical steel) 4,080 N/A 4,080 4,488 4,896 5,304 (F) 7225 50 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of silicon-electrical steel) 4,160 N/A 4,160 4,576 4,992 5,408 (F) 7225 91 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and electrolytically plated or coated with zinc (excl. products of silicon-electrical steel) 4,160 N/A 4,160 4,576 4,992 5,408 (F) 7225 92 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and plated or coated with zinc (excl. electrolytically plated or coated and products of silicon-electrical steel) 4,160 N/A 4,160 4,576 4,992 5,408 (F) 7225 99 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. plated or coated with zinc and products of silicon-electrical steel) 4,160 N/A 4,160 4,576 4,992 5,408 (F) 7226 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" see below N/A see below see below see below see below   7226 11 00 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", grain-oriented 5,340 N/A 5,340 5,874 6,408 6,942 (C) 7226 19 10 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, not further worked than hot-rolled 4,080 N/A 4,080 4,488 4,896 5,304 (C) 7226 19 80 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, cold-rolled "cold-reduced", whether or not further worked, or hot-rolled and further worked, non-grain-oriented 4,160 N/A 4,160 4,576 4,992 5,408 (F) 7226 20 00 Flat-rolled products of high-speed steel, of a width of <= 600 mm, hot-rolled or cold-rolled "cold-reduced" 4,080 N/A 4,080 4,488 4,896 5,304 (F) 7226 91 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than hot-rolled (excl. products of high-speed steel or silicon-electrical steel) 4,080 N/A 4,080 4,488 4,896 5,304 (F) 7226 92 00 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of high-speed steel or silicon-electrical steel) 4,160 N/A 4,160 4,576 4,992 5,408 (F) 7226 99 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. products of high-speed steel or silicon-electrical steel) 4,160 N/A 4,160 4,576 4,992 5,408 (F) 7227 Bars and rods of alloy steel other than stainless, hot-rolled, in irregularly wound coils 3,890 N/A 3,890 4,279 4,668 5,057 (C)/(F) 7228 Other bars and rods of alloy steel other than stainless, angles, shapes and sections of alloy steel other than stainless, n.e.s.; hollow drill bars and rods, of alloy or non-alloy steel see below N/A see below see below see below see below   7228 10 20 Bars and rods of high-speed steel, not further worked than hot-rolled, hot-drawn or extruded, and hot-rolled, hot-drawn or extruded, not further worked than clad (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,890 N/A 3,890 4,279 4,668 5,057 (F) 7228 10 50 Bars and rods of high-speed steel, forged (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,890 N/A 3,890 4,279 4,668 5,057 (F) 7228 10 90 Bars and rods of high-speed steel, not further worked than cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked (excl. forged products, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,890 N/A 3,890 4,279 4,668 5,057 (F) 7228 20 Bars and rods of silico-manganese steel (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,890 N/A 3,890 4,279 4,668 5,057 (F) 7228 30 Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,890 N/A 3,890 4,279 4,668 5,057 (C)/(F) 7228 40 Bars and rods of alloy steel other than stainless, not further worked than forged (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,890 N/A 3,890 4,279 4,668 5,057 (F) 7228 50 Bars and rods of alloy steel other than stainless, not further worked than cold-formed or cold-finished (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,890 N/A 3,890 4,279 4,668 5,057 (C)/(F) 7228 60 Bars and rods of alloy steel other than stainless, cold-formed or cold-finished and further worked or hot-formed and further worked, n.e.s. (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,890 N/A 3,890 4,279 4,668 5,057 (F) 7228 70 Angles, shapes and sections of alloy steel other than stainless, n.e.s. 3,890 N/A 3,890 4,279 4,668 5,057 (F) 7228 80 00 Hollow drill bars and rods, of alloy or non-alloy steel 3,890 N/A 3,890 4,279 4,668 5,057 (F) 7229 Wire of alloy steel other than stainless, in coils (excl. bars and rods) 3,890 N/A 3,890 4,279 4,668 5,057 (C)/(F) 7301 Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel 4,220 N/A 4,220 4,642 5,064 5,486 (C) 7302 Railway or tramway track construction material of iron or steel, the following : rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers "cross-ties", fish-plates, chairs, chair wedges, sole plates "base plates", rail clips, bedplates, ties and other material specialised for jointing or fixing rails 4,030 N/A 4,030 4,433 4,836 5,239 (C) 7303 Tubes, pipes and hollow profiles, of cast iron see below N/A see below see below see below see below   7303 00 Tubes, pipes and hollow profiles, of cast iron 3,480 N/A 3,480 3,828 4,176 4,524   7304 Tubes, pipes and hollow profiles, seamless, of iron or steel (excl. products of cast iron) see below N/A see below see below see below see below   7304 11 00 Line pipe of a kind used for oil or gas pipelines, seamless, of stainless steel 3,620 N/A 3,620 3,982 4,344 4,706   7304 19 Line pipe of a kind used for oil or gas pipelines, seamless, of iron or steel (excl. products of stainless steel or of cast iron) 4,030 N/A 4,030 4,433 4,836 5,239 (C) 7304 22 00 Drill pipe, seamless, of stainless steel, of a kind used in drilling for oil or gas 3,620 N/A 3,620 3,982 4,344 4,706   7304 23 00 Drill pipe, seamless, of a kind used in drilling for oil or gas, of iron or steel (excl. products of stainless steel or of cast iron) 4,030 N/A 4,030 4,433 4,836 5,239 (C) 7304 24 00 Casing and tubing, seamless, of a kind used for drilling for oil or gas, of stainless steel 3,620 N/A 3,620 3,982 4,344 4,706   7304 29 Casing and tubing, seamless, of iron or steel, of a kind used in drilling for oil or gas (excl. products of cast iron) 4,030 N/A 4,030 4,433 4,836 5,239 (C) 7304 31 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" (excl. cast iron products and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used for drilling for oil or gas) 4,030 N/A 4,030 4,433 4,836 5,239 (C) 7304 39 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, not cold-drawn or cold-rolled "cold-reduced" (excl. cast iron products, line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas) 4,030 N/A 4,030 4,433 4,836 5,239 (C) 7304 41 00 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas) 3,620 N/A 3,620 3,982 4,344 4,706   7304 49 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines or of a kind used for drilling for oil or gas) 3,620 N/A 3,620 3,982 4,344 4,706   7304 51 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil) 3,850 N/A 3,850 4,235 4,620 5,005 (F) 7304 59 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil) 3,850 N/A 3,850 4,235 4,620 5,005 (C)/(F) 7304 90 00 Tubes, pipes and hollow profiles, seamless, of non-circular cross-section, of iron or steel (excl. products of cast iron) 4,030 N/A 4,030 4,433 4,836 5,239 (C) 7305 Tubes and pipes, having circular cross-sections and an external diameter of > 406,4 mm, of flat-rolled products of iron or steel "e.g., welded, riveted or similarly closed" 4,220 N/A 4,220 4,642 5,064 5,486 (C) 7306 Tubes, pipes and hollow profiles "e.g., open seam or welded, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless tubes and pipes and tubes having internal and external circular cross-sections and an external diameter of > 406,4 mm) see below N/A see below see below see below see below   7306 11 00 Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm 3,890 N/A 3,890 4,279 4,668 5,057   7306 19 00 Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron) 4,220 N/A 4,220 4,642 5,064 5,486 (C) 7306 21 00 Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm 3,890 N/A 3,890 4,279 4,668 5,057   7306 29 00 Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron) 4,220 N/A 4,220 4,642 5,064 5,486 (C) 7306 30 12 Precision tubes, welded, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" 4,220 N/A 4,220 4,642 5,064 5,486 (C) 7306 30 18 Precision tubes, welded, of circular cross-section, of iron or non-alloy steel (excl. cold-drawn or cold-rolled) 4,140 N/A 4,140 4,554 4,968 5,382   7306 30 41 Threaded or threadable tubes "gas pipe", welded, of circular cross-section, of iron or non-alloy steel, plated or coated with zinc 4,220 N/A 4,220 4,642 5,064 5,486 (C) 7306 30 49 Threaded or threadable tubes "gas pipe", welded, of circular cross-section, of iron or non-alloy steel (excl. products plated or coated with zinc) 4,220 N/A 4,220 4,642 5,064 5,486 (C) 7306 30 72 Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel, of an external diameter of <= 168,3 mm, plated or coated with zinc (excl. line pipe of a kind used for oil or gas pipelines or casing and tubingof a kind used in drilling for oil or gas) 4,220 N/A 4,220 4,642 5,064 5,486 (C) 7306 30 77 Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel of an external diameter of <= 168,3 mm (excl. plated or coated with zinc and line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used in drilling for oil or gas, precision tubes and threaded or threadable tubes "gas pipe") 4,220 N/A 4,220 4,642 5,064 5,486 (C) 7306 30 80 Tubes, pipes and hollow profiles, welded, having a circular cross-section, of iron or steel, of an external diameter of > 168,3 mm but <= 406,4 mm (excl. line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, or precision steel tubes, electrical conduit tubes or threaded or threadable tubes "gas pipe") 4,220 N/A 4,220 4,642 5,064 5,486 (C) 7306 40 20 Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. products having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) 3,890 N/A 3,890 4,279 4,668 5,057   7306 40 80 Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel (excl. products cold-drawn or cold-rolled "cold-reduced", tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) 3,810 N/A 3,810 4,191 4,572 4,953   7306 50 21 Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" 4,160 N/A 4,160 4,576 4,992 5,408 (F) 7306 50 29 Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless (excl. cold-drawn or cold-rolled) 4,080 N/A 4,080 4,488 4,896 5,304 (F) 7306 50 80 Tubes, pipes and hollow profiles, welded, of circular cross-section, of alloy steel other than stainless (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and precision steel tubes) 4,160 N/A 4,160 4,576 4,992 5,408 (F) 7306 61 10 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel 3,890 N/A 3,890 4,279 4,668 5,057   7306 61 92 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of <= 2 mm 4,220 N/A 4,220 4,642 5,064 5,486 (C) 7306 61 99 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of > 2 mm 4,220 N/A 4,220 4,642 5,064 5,486 (C) 7306 69 10 Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) 3,890 N/A 3,890 4,279 4,668 5,057   7306 69 90 Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of iron or steel other than stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) 4,220 N/A 4,220 4,642 5,064 5,486 (C) 7306 90 00 Tubes, pipes and hollow profiles "e.g., open seam, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless or welded tubes and pipes and tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm) 4,220 N/A 4,220 4,642 5,064 5,486 (C) 7307 Tube or pipe fittings "e.g. couplings, elbows, sleeves", of iron or steel see below N/A see below see below see below see below   7307 11 Tube or pipe fittings of non-malleable cast iron 3,480 N/A 3,480 3,828 4,176 4,524   7307 19 10 Tube or pipe fittings of cast iron (excl. of non-malleable) 3,480 N/A 3,480 3,828 4,176 4,524   7307 19 90 Cast tube or pipe fittings of steel 4,020 N/A 4,020 4,422 4,824 5,226 (C) 7307 21 00 Flanges of stainless steel (excl. cast products) 3,870 N/A 3,870 4,257 4,644 5,031   7307 22 Threaded elbows, bends and sleeves of stainless steel (excl. cast products) 3,870 N/A 3,870 4,257 4,644 5,031   7307 23 Butt welding tube or pipe fittings of stainless steel (excl. cast products) 3,870 N/A 3,870 4,257 4,644 5,031   7307 29 Tube or pipe fittings of stainless steel (excl. cast products, flanges, threaded elbows, bends and sleeves and butt weldings fittings) 3,870 N/A 3,870 4,257 4,644 5,031   7307 91 00 Flanges of iron or steel (excl. cast or stainless products) 4,030 N/A 4,030 4,433 4,836 5,239 (C) 7307 92 Threaded elbows, bends and sleeves, of stainless steel (excl. cast or stainless products) 4,030 N/A 4,030 4,433 4,836 5,239 (C) 7307 93 Butt welding fittings of iron or steel (excl. cast iron or stainless steel products, and flanges) 4,030 N/A 4,030 4,433 4,836 5,239 (C) 7307 99 Tube or pipe fittings, of iron or steel (excl. cast iron or stainless steel products; flanges; threaded elbows, bends and sleeves; butt welding fittings) 4,030 N/A 4,030 4,433 4,836 5,239 (C) 7308 Structures and parts of structures "e.g., bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns", of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel (excl. prefabricated buildings of heading 9406) 4,220 N/A 4,220 4,642 5,064 5,486 (C) 7309 Reservoirs, tanks, vats and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of > 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated (excl. containers specifically constructed or equipped for one or more types of transport) 4,220 N/A 4,220 4,642 5,064 5,486 (C) 7310 Tanks, casks, drums, cans, boxes and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of <= 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated, n.e.s. 4,220 N/A 4,220 4,642 5,064 5,486 (C) 7311 Containers of iron or steel, for compressed or liquefied gas (excl. containers specifically constructed or equipped for one or more types of transport) see below N/A see below see below see below see below   7311 00 Containers of iron or steel, for compressed or liquefied gas (excl. containers specifically constructed or equipped for one or more types of transport) 4,030 N/A 4,030 4,433 4,836 5,239 (C) 7318 Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers, incl. spring washers, and similar articles, of iron or steel (excl. lag screws, stoppers, plugs and the like, threaded) see below N/A see below see below see below see below   7318 11 00 Coach screws of iron or steel 4,030 N/A 4,030 4,433 4,836 5,239 (C) 7318 12 10 Wood screws of stainless steel (excl. coach screws) 3,620 N/A 3,620 3,982 4,344 4,706 (C) 7318 12 90 Wood screws of iron or steel other than stainless (excl. coach screws) 4,030 N/A 4,030 4,433 4,836 5,239 (C) 7318 13 00 Screw hooks and screw rings, of iron or steel 4,030 N/A 4,030 4,433 4,836 5,239 (C) 7318 14 10 Self-tapping screws, of stainless steel (excl. wood screws) 3,620 N/A 3,620 3,982 4,344 4,706 (C) 7318 14 91 Spaced-thread screws of iron or steel other than stainless 4,030 N/A 4,030 4,433 4,836 5,239 (C) 7318 14 99 Self-tapping screws of iron or steel other than stainless (excl. spaced-thread screws and wood screws) 4,030 N/A 4,030 4,433 4,836 5,239 (C) 7318 15 Threaded screws and bolts, of iron or steel, whether or not with their nuts and washers (excl. coach screws and other wood screws, screw hooks and screw rings, self-tapping screws, lag screws, stoppers, plugs and the like, threaded) 4,030 N/A 4,030 4,433 4,836 5,239 (C) 7318 16 Nuts of iron or steel 4,030 N/A 4,030 4,433 4,836 5,239 (C) 7318 19 00 Threaded articles, of iron or steel, n.e.s. 4,030 N/A 4,030 4,433 4,836 5,239 (C) 7318 21 00 Spring washers and other lock washers, of iron or steel 4,030 N/A 4,030 4,433 4,836 5,239 (C) 7318 22 00 Washers of iron or steel (excl. spring washers and other lock washers) 4,030 N/A 4,030 4,433 4,836 5,239 (C) 7318 23 00 Rivets of iron or steel (excl. tubular and bifurcated rivets for particular uses) 4,030 N/A 4,030 4,433 4,836 5,239 (C) 7318 24 00 Cotters and cotter pins, of iron or steel 4,030 N/A 4,030 4,433 4,836 5,239 (C) 7318 29 00 Non-threaded articles, of iron or steel 4,030 N/A 4,030 4,433 4,836 5,239 (C) 7326 Articles of iron or steel, n.e.s. (excl. cast articles) see below N/A see below see below see below see below   7326 11 00 Grinding balls and similar articles for mills, of iron or steel, forged or stamped, but not further worked 4,020 N/A 4,020 4,422 4,824 5,226 (C) 7326 19 Articles of iron or steel, forged or stamped, but not further worked, n.e.s. (excl. grinding balls and similar articles for mills) 4,020 N/A 4,020 4,422 4,824 5,226 (C) 7326 20 00 Articles of iron or steel wire, n.e.s. 4,030 N/A 4,030 4,433 4,836 5,239 (C) 7326 90 30 Ladders and steps, of iron or steel 4,030 N/A 4,030 4,433 4,836 5,239 (C) 7326 90 40 Pallets and similar platforms for handling goods, of iron or steel 4,030 N/A 4,030 4,433 4,836 5,239 (C) 7326 90 50 Reels for cables, piping and the like, of iron or steel 4,030 N/A 4,030 4,433 4,836 5,239 (C) 7326 90 60 Ventilators, non-mechanical, guttering, hooks and like articles used in the building industry, n.e.s., of iron or steel 4,030 N/A 4,030 4,433 4,836 5,239 (C) 7326 90 92 Articles of iron or steel, open-die forged, n.e.s. 4,020 N/A 4,020 4,422 4,824 5,226 (C) 7326 90 94 Articles of iron or steel, closed-die forged, n.e.s. 4,020 N/A 4,020 4,422 4,824 5,226 (C) 7326 90 96 Sintered articles of iron or steel, n.e.s. 4,020 N/A 4,020 4,422 4,824 5,226 (C) 7326 90 98 Articles of iron or steel, n.e.s. 4,220 N/A 4,220 4,642 5,064 5,486 (C) South Korea Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – – – –   2523 10 00 White clinker 1,190 0,040 1,230 1,353 1,476 1,599   2523 10 00 Grey clinker 0,880 0,030 0,920 1,012 1,104 1,196 (A) 2523 21 00 White Portland cement 1,230 0,130 1,360 1,496 1,632 1,768   2523 29 00 Grey Portland cement 0,890 0,060 0,940 1,034 1,128 1,222   2523 90 00 White hydraulic cements 1,260 0,160 1,420 1,562 1,704 1,846   2523 90 00 Grey hydraulic cements 0,840 0,060 0,910 1,001 1,092 1,183 (A) 2523 30 00 Aluminous cement – – – – – –   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 2,130 0,060 2,190 2,212 2,212 2,212   2814 10 00 Anhydrous ammonia – – – – – –   2814 20 00 Ammonia in aqueous solution 0,620 0,060 0,670 0,677 0,677 0,677   2834 21 00 Nitrate of potassium 1,790 0,080 1,880 1,899 1,899 1,899   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,470 0,040 0,510 0,515 0,515 0,515   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,770 0,040 0,820 0,828 0,828 0,828   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,410 0,140 1,540 1,555 1,555 1,555   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,380 0,130 1,510 1,525 1,525 1,525   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,610 0,090 0,700 0,707 0,707 0,707   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,210 0,100 1,310 1,323 1,323 1,323   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,360 0,080 1,440 1,454 1,454 1,454   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,090 0,130 2,220 2,242 2,242 2,242   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,800 0,110 1,920 1,939 1,939 1,939   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,800 0,110 1,920 1,939 1,939 1,939   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 3,320 0,090 3,420 3,454 3,454 3,454   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,760 0,110 1,860 1,879 1,879 1,879   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,380 0,100 1,480 1,495 1,495 1,495   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,470 0,120 1,590 1,606 1,606 1,606   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,710 0,090 0,800 0,808 0,808 0,808   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,900 0,100 1 1,010 1,010 1,010   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,610 0,080 0,690 0,697 0,697 0,697   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,480 0,070 0,550 0,556 0,556 0,556   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,310 0,050 0,360 0,364 0,364 0,364   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,230 0,130 1,360 1,374 1,374 1,374   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,560 0,110 0,670 0,677 0,677 0,677   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,190 0,080 1,280 1,293 1,293 1,293   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,610 0,060 0,670 0,677 0,677 0,677   Aluminium         10 % mark-up 20 % mark-up 30 % mark-up   7601 Unwrought aluminium 0,360 N/A 0,360 0,396 0,432 0,468 (L) 7603 Aluminium powders and flakes 1,260 N/A 1,260 1,386 1,512 1,638 (L) 7604 10 10 Bars and rods 1,490 N/A 1,490 1,639 1,788 1,937 (L) 7604 10 90 Profiles 1,500 N/A 1,500 1,650 1,800 1,950 (L) 7604 21 00 Hollow profiles 1,500 N/A 1,500 1,650 1,800 1,950 (L) 7604 29 10 Bars and rods 1,490 N/A 1,490 1,639 1,788 1,937 (L) 7604 29 90 Profiles 1,500 N/A 1,500 1,650 1,800 1,950 (L) 7605 Aluminium wire 1,490 N/A 1,490 1,639 1,788 1,937 (L) 7606 Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm 1,950 N/A 1,950 2,145 2,340 2,535 (L) 7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm 1,950 N/A 1,950 2,145 2,340 2,535 (L) 7608 Aluminium tubes and pipes 1,500 N/A 1,500 1,650 1,800 1,950 (L) 7609 00 00 Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) 1,500 N/A 1,500 1,650 1,800 1,950 (L) 7610 10 00 Doors, windows and their frames and thresholds for doors 1,500 N/A 1,500 1,650 1,800 1,950 (L) 7610 90 Other 1,500 N/A 1,500 1,650 1,800 1,950 (L) 7610 90 10 Bridges and bridge-sections, towers and lattice masts 1,500 N/A 1,500 1,650 1,800 1,950 (L) 7610 90 90 Other 1,500 N/A 1,500 1,650 1,800 1,950 (L) 7611 00 00 Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 1,950 N/A 1,950 2,145 2,340 2,535 (L) 7612 Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 1,950 N/A 1,950 2,145 2,340 2,535 (L) 7613 00 00 Aluminium containers for compressed or liquefied gas 1,950 N/A 1,950 2,145 2,340 2,535 (L) 7614 Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated 1,490 N/A 1,490 1,639 1,788 1,937 (L) 7616 10 00 Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles 1,950 N/A 1,950 2,145 2,340 2,535 (L) 7616 91 00 Cloth, grill, netting and fencing, of aluminium wire 1,950 N/A 1,950 2,145 2,340 2,535 (L) 7616 99 10 Cast 1,260 N/A 1,260 1,386 1,512 1,638 (L) 7616 99 90 Other 1,950 N/A 1,950 2,145 2,340 2,535 (L) Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 14,030 N/A 14,030 15,433 16,836 18,239   Iron and steel         10 % mark-up 20 % mark-up 30 % mark-up   2601 12 00 Agglomerated iron ores and concentrates (excl. roasted iron pyrites) 0,100 0,040 0,130 0,143 0,156 0,169   7201 Pig iron and spiegeleisen, in pigs, blocks or other primary forms 1,540 N/A 1,540 1,694 1,848 2,002   7202 11 Ferro-manganese, containing by weight > 2% of carbon 1,690 N/A 1,690 1,859 2,028 2,197   7202 19 Ferro-manganese, containing by weight <= 2% carbon 5,590 N/A 5,590 6,149 6,708 7,267   7202 41 Ferro-chromium, containing by weight > 4% of carbon 2,350 N/A 2,350 2,585 2,820 3,055   7202 49 Ferro-chromium, containing by weight <= 4% of carbon – N/A – – – –   7202 60 00 Ferro-nickel 3,480 N/A 3,480 3,828 4,176 4,524   7203 Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99,94%, in lumps, pellets or similar forms – N/A – – – –   7205 Granules and powders of pig iron, spiegeleisen, iron or steel (excl. granules and powders of ferro-alloys, turnings and filings of iron or steel, radioactive iron powders "isotopes" and certain low-calibre, substandard balls for ballbearings) 1,580 N/A 1,580 1,738 1,896 2,054 (C) 7206 Iron and non-alloy steel in ingots or other primary forms (excl. remelting scrap ingots, products obtained by continuous casting and iron of heading 7203) see below N/A see below see below see below see below   7206 10 00 Ingots, of iron and non-alloy steel (excl. remelted scrap ingots, continuous cast products, iron of heading 7203) 1,640 N/A 1,640 1,804 1,968 2,132 (C) 7206 90 00 Iron and non-alloy steel, in puddled bars or other primary forms (excl. ingots, remelted scrap ingots, continuous cast products, iron of heading 7203) 1,640 N/A 1,640 1,804 1,968 2,132 (C) 7207 Semi-finished products of iron or non-alloy steel see below N/A see below see below see below see below   7207 11 11 Semi-finished products, of non-alloy free-cutting steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting 2,118 N/A 2,118 2,330 2,542 2,754 (C) 7207 11 14 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness of <= 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel) 2,118 N/A 2,118 2,330 2,542 2,754 (C) 7207 11 16 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness of > 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel) 2,118 N/A 2,118 2,330 2,542 2,754 (C) 7207 11 90 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular cross-section, the width < twice the thickness, forged 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7207 12 10 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtained by continuous casting 2,118 N/A 2,118 2,330 2,542 2,754 (C) 7207 12 90 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular "other than square" cross-section, the width >= twice the thickness, forged 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7207 19 12 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting 2,118 N/A 2,118 2,330 2,542 2,754 (C) 7207 19 19 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, forged 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7207 19 80 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon (excl. semi-products, of square, rectangular, circular or polygonal cross-section) 2,118 N/A 2,118 2,330 2,542 2,754 (C) 7207 20 11 Semi-finished products, of non-alloy free-cutting steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting 2,118 N/A 2,118 2,330 2,542 2,754 (C) 7207 20 15 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% but < 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel) 2,118 N/A 2,118 2,330 2,542 2,754 (C) 7207 20 17 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel) 2,118 N/A 2,118 2,330 2,542 2,754 (C) 7207 20 19 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, forged 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7207 20 32 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtained by continuous casting 2,118 N/A 2,118 2,330 2,542 2,754 (C) 7207 20 39 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of rectangular "other than square" cross-section and the width >= twice the thickness, forged 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7207 20 52 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting 2,118 N/A 2,118 2,330 2,542 2,754 (C) 7207 20 59 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of circular or polygonal cross-section, forged 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7207 20 80 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon (excl. those of square, rectangular, circular or polygonal cross-section) 2,118 N/A 2,118 2,330 2,542 2,754 (C) 7208 Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled, not clad, plated or coated 2,118 N/A 2,118 2,330 2,542 2,754 (C) 7209 Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, cold-rolled "cold-reduced", not clad, plated or coated 2,144 N/A 2,144 2,358 2,573 2,787 (C) 7210 Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated 2,144 N/A 2,144 2,358 2,573 2,787 (C) 7211 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", not clad, plated or coated see below N/A see below see below see below see below   7211 13 00 Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as "wide flats" 2,118 N/A 2,118 2,330 2,542 2,754 (C) 7211 14 00 Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, not further worked than hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm (excl. "wide flats") 2,118 N/A 2,118 2,330 2,542 2,754 (C) 7211 19 00 Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, simply hot-rolled, not clad, plated or coated, of a thickness < 4,75 mm (excl. "wide flats") 2,118 N/A 2,118 2,330 2,542 2,754 (C) 7211 23 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight < 0,25% of carbon 2,144 N/A 2,144 2,358 2,573 2,787 (C) 7211 29 00 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight >= 0,25% of carbon 2,144 N/A 2,144 2,358 2,573 2,787 (C) 7211 90 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked, but not clad, plated or coated 2,144 N/A 2,144 2,358 2,573 2,787 (C) 7212 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated 2,144 N/A 2,144 2,358 2,573 2,787 (C) 7213 Bars and rods of iron or non-alloy steel, hot-rolled, in irregularly wound coils 2,118 N/A 2,118 2,330 2,542 2,754 (C) 7214 Bars and rods, of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but incl. those twisted after rolling (excl. in irregularly wound coils) see below N/A see below see below see below see below   7214 10 00 Bars and rods, of iron or non-alloy steel, not further worked than forged (excl. in irregularly wound coils) 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7214 20 00 Bars and rods, of iron or non-alloy steel, with indentations, ribs, groves or other deformations produced during the rolling process 2,118 N/A 2,118 2,330 2,542 2,754 (C) 7214 30 00 Bars and rods, of non-alloy free-cutting steel, not further worked than hot-rolled, hot-drawn or hot-extruded (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling) 2,118 N/A 2,118 2,330 2,542 2,754 (C) 7214 91 Bars and rods, of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, of rectangular "other than square" cross-section (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process, bars and rods twisted after rolling and free-cutting steel) 2,118 N/A 2,118 2,330 2,542 2,754 (C) 7214 99 Bars and rods, of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded (excl. of rectangular [other than square] cross-section and those containing indentations, ribs, grooves or other deformations produced during the rolling process, and of non-alloy free-cutting steel) 2,118 N/A 2,118 2,330 2,542 2,754 (C) 7215 Bars and rods, of iron or non-alloy steel, cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked, n.e.s. 2,118 N/A 2,118 2,330 2,542 2,754 (C) 7216 Angles, shapes and sections of iron or non-alloy steel, n.e.s. 2,118 N/A 2,118 2,330 2,542 2,754 (C) 7217 Wire of iron or non-alloy steel, in coils (excl. bars and rods) see below N/A see below see below see below see below   7217 10 Wire of iron or non-alloy steel, in coils, not plated or coated, whether or not polished (excl. bars and rods) 2,118 N/A 2,118 2,330 2,542 2,754 (C) 7217 20 Wire of iron or non-alloy steel, in coils, plated or coated with zinc (excl. bars and rods) 2,118 N/A 2,118 2,330 2,542 2,754 (C) 7217 30 Wire of iron or non-alloy steel, in coils, plated or coated with base metals (excl. plated or coated with zinc, and bars and rods) 2,118 N/A 2,118 2,330 2,542 2,754 (C) 7217 90 Wire of iron or non-alloy steel, in coils, plated or coated (excl. plated or coated with base metals, and bars and rods) 2,118 N/A 2,118 2,330 2,542 2,754 (C) 7218 Stainless steel in ingots or other primary forms (excl. remelting scrap ingots and products obtained by continuous casting); semi-finished products of stainless steel see below N/A see below see below see below see below   7218 10 00 Steel, stainless, in ingots and other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) 3,760 N/A 3,760 4,136 4,512 4,888   7218 91 Semi-finished products of stainless steel, of rectangular "other than square" cross-section 3,630 N/A 3,630 3,993 4,356 4,719   7218 99 11 Semi-finished products of stainless steel, of square cross-section, rolled or obtained by continuous casting 3,630 N/A 3,630 3,993 4,356 4,719   7218 99 19 Semi-finished products of stainless steel, of square cross-section, forged 3,760 N/A 3,760 4,136 4,512 4,888   7218 99 20 Semi-finished products of stainless steel, of circular cross-section or of cross-section other than square or rectangular, rolled or obtained by continuous casting 3,630 N/A 3,630 3,993 4,356 4,719   7218 99 80 Semi-finished products of stainless steel, forged (excl. products of square or rectangular cross-section) 3,760 N/A 3,760 4,136 4,512 4,888   7219 Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" see below N/A see below see below see below see below   7219 11 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of > 10 mm 3,630 N/A 3,630 3,993 4,356 4,719   7219 12 Flat-rolled products of stainless steel, of a width of>= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 4,7 mm and <= 10 mm 3,630 N/A 3,630 3,993 4,356 4,719   7219 13 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 3 mm and < 4,75 mm 3,630 N/A 3,630 3,993 4,356 4,719   7219 14 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of < 3 mm 3,630 N/A 3,630 3,993 4,356 4,719   7219 21 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of > 10 mm 3,630 N/A 3,630 3,993 4,356 4,719   7219 22 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 4,75 mm and <= 10 mm 3,630 N/A 3,630 3,993 4,356 4,719   7219 23 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 3 mm and < 4,75 mm 3,630 N/A 3,630 3,993 4,356 4,719   7219 24 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of < 3 mm 3,630 N/A 3,630 3,993 4,356 4,719   7219 31 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 4,75 mm 3,650 N/A 3,650 4,015 4,380 4,745   7219 32 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 3 mm but < 4,75 mm 3,650 N/A 3,650 4,015 4,380 4,745   7219 33 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of > 1 mm but < 3 mm 3,650 N/A 3,650 4,015 4,380 4,745   7219 34 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 0,5 mm but <= 1 mm 3,650 N/A 3,650 4,015 4,380 4,745   7219 35 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of < 0,5 mm 3,650 N/A 3,650 4,015 4,380 4,745   7219 90 Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked 3,650 N/A 3,650 4,015 4,380 4,745   7220 Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" see below N/A see below see below see below see below   7220 11 00 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of >= 4,75 mm 3,630 N/A 3,630 3,993 4,356 4,719   7220 12 00 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of < 4,75 mm 3,630 N/A 3,630 3,993 4,356 4,719   7220 20 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" 3,650 N/A 3,650 4,015 4,380 4,745   7220 90 Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked 3,650 N/A 3,650 4,015 4,380 4,745   7221 Bars and rods of stainless steel, hot-rolled, in irregularly wound coils 3,650 N/A 3,650 4,015 4,380 4,745   7222 Other bars and rods of stainless steel; angles, shapes and sections of stainless steel, n.e.s. see below N/A see below see below see below see below   7222 11 Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only hot-extruded, of circular cross-section 3,650 N/A 3,650 4,015 4,380 4,745   7222 19 Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only extruded (excl. of circular cross-section) 3,650 N/A 3,650 4,015 4,380 4,745   7222 20 Other bars and rods of stainless steel, not further worked than cold-formed or cold-finished 3,650 N/A 3,650 4,015 4,380 4,745   7222 30 Other bars and rods of stainless steel, cold-formed or cold-finished and further worked, or not further worked than forged, or forged, or hot-formed by other means and further worked, n.e.s. 3,760 N/A 3,760 4,136 4,512 4,888   7222 40 Angles, shapes and sections of stainless steel, n.e.s. 3,650 N/A 3,650 4,015 4,380 4,745   7223 Wire of stainless steel, in coils (excl. bars and rods) see below N/A see below see below see below see below   7223 00 Wire of stainless steel, in coils (excl. bars and rods) 3,650 N/A 3,650 4,015 4,380 4,745   7224 Steel, alloy, other than stainless, in ingots or other primary forms, semi-finished products of alloy steel other than stainless (excl. waste and scrap in ingot form, and products obtained by continuous casting) see below N/A see below see below see below see below   7224 10 Steel, alloy, other than stainless, in ingots or other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) 4,150 N/A 4,150 4,565 4,980 5,395 (F) 7224 90 02 Semi-finished products of tool steel 4,030 N/A 4,030 4,433 4,836 5,239 (F) 7224 90 03 Semi-finished products of high-speed steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting the width measuring < twice the thickness 4,030 N/A 4,030 4,433 4,836 5,239 (F) 7224 90 05 Semi-finished products of steel containing by weight <= 0,7% of carbon, 0,5% to 1,2% of manganese, 0,6% to 2,3% of silicon, or of steel containing by weight >= 0,0008% of boron with any other element < the minimum content referred to in Note 1 f to chapter 72, of square or rectangular cross-section, hot rolled or obtained by continuous casting, the width measuring < twice the thickness 4,030 N/A 4,030 4,433 4,836 5,239 (F) 7224 90 07 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring < twice the thickness (excl. of tool steel, high-speed steel and articles of subheading 7224.90.05) 4,030 N/A 4,030 4,433 4,836 5,239 (F) 7224 90 14 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring >= twice the thickness (excl. of tool steel) 4,030 N/A 4,030 4,433 4,836 5,239 (F) 7224 90 18 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, forged (excl. of tool steel) 4,150 N/A 4,150 4,565 4,980 5,395 (F) 7224 90 31 Semi-finished products of steel containing by weight 0,9% to 1,15% carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting 4,030 N/A 4,030 4,433 4,836 5,239 (F) 7224 90 38 Semi-finished products of alloy steel, other than stainless steel, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting (excl. of tool steel and products containing by weight 0,9% to 1,15% of carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum) 4,030 N/A 4,030 4,433 4,836 5,239 (F) 7224 90 90 Semi-finished products of alloy steel, other than stainless steel, forged (excl. of tool steel and products of square or rectangular, circular or polygamol cross-section) 4,150 N/A 4,150 4,565 4,980 5,395 (F) 7225 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" see below N/A see below see below see below see below   7225 11 00 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, grain-oriented 5,320 N/A 5,320 5,852 6,384 6,916 (C) 7225 19 10 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, hot-rolled 4,030 N/A 4,030 4,433 4,836 5,239 (C) 7225 19 90 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, cold-rolled "cold-reduced", non-grain-oriented 4,050 N/A 4,050 4,455 4,860 5,265 (F) 7225 30 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, in coils (excl. products of silicon-electrical steel) 4,030 N/A 4,030 4,433 4,836 5,239 (F) 7225 40 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, not in coils (excl. products of silicon-electrical steel) 4,030 N/A 4,030 4,433 4,836 5,239 (F) 7225 50 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of silicon-electrical steel) 4,050 N/A 4,050 4,455 4,860 5,265 (F) 7225 91 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and electrolytically plated or coated with zinc (excl. products of silicon-electrical steel) 4,050 N/A 4,050 4,455 4,860 5,265 (F) 7225 92 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and plated or coated with zinc (excl. electrolytically plated or coated and products of silicon-electrical steel) 4,050 N/A 4,050 4,455 4,860 5,265 (F) 7225 99 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. plated or coated with zinc and products of silicon-electrical steel) 4,050 N/A 4,050 4,455 4,860 5,265 (F) 7226 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" see below N/A see below see below see below see below   7226 11 00 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", grain-oriented 5,320 N/A 5,320 5,852 6,384 6,916 (C) 7226 19 10 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, not further worked than hot-rolled 4,030 N/A 4,030 4,433 4,836 5,239 (C) 7226 19 80 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, cold-rolled "cold-reduced", whether or not further worked, or hot-rolled and further worked, non-grain-oriented 4,050 N/A 4,050 4,455 4,860 5,265 (F) 7226 20 00 Flat-rolled products of high-speed steel, of a width of <= 600 mm, hot-rolled or cold-rolled "cold-reduced" 4,030 N/A 4,030 4,433 4,836 5,239 (F) 7226 91 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than hot-rolled (excl. products of high-speed steel or silicon-electrical steel) 4,030 N/A 4,030 4,433 4,836 5,239 (F) 7226 92 00 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of high-speed steel or silicon-electrical steel) 4,050 N/A 4,050 4,455 4,860 5,265 (F) 7226 99 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. products of high-speed steel or silicon-electrical steel) 4,050 N/A 4,050 4,455 4,860 5,265 (F) 7227 Bars and rods of alloy steel other than stainless, hot-rolled, in irregularly wound coils 4,050 N/A 4,050 4,455 4,860 5,265 (C)/(F) 7228 Other bars and rods of alloy steel other than stainless, angles, shapes and sections of alloy steel other than stainless, n.e.s.; hollow drill bars and rods, of alloy or non-alloy steel see below N/A see below see below see below see below   7228 10 20 Bars and rods of high-speed steel, not further worked than hot-rolled, hot-drawn or extruded, and hot-rolled, hot-drawn or extruded, not further worked than clad (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 4,050 N/A 4,050 4,455 4,860 5,265 (F) 7228 10 50 Bars and rods of high-speed steel, forged (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 4,150 N/A 4,150 4,565 4,980 5,395 (F) 7228 10 90 Bars and rods of high-speed steel, not further worked than cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked (excl. forged products, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 4,050 N/A 4,050 4,455 4,860 5,265 (F) 7228 20 Bars and rods of silico-manganese steel (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 4,050 N/A 4,050 4,455 4,860 5,265 (F) 7228 30 Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 4,050 N/A 4,050 4,455 4,860 5,265 (C)/(F) 7228 40 Bars and rods of alloy steel other than stainless, not further worked than forged (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 4,150 N/A 4,150 4,565 4,980 5,395 (F) 7228 50 Bars and rods of alloy steel other than stainless, not further worked than cold-formed or cold-finished (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 4,050 N/A 4,050 4,455 4,860 5,265 (C)/(F) 7228 60 Bars and rods of alloy steel other than stainless, cold-formed or cold-finished and further worked or hot-formed and further worked, n.e.s. (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 4,050 N/A 4,050 4,455 4,860 5,265 (F) 7228 70 Angles, shapes and sections of alloy steel other than stainless, n.e.s. 4,050 N/A 4,050 4,455 4,860 5,265 (F) 7228 80 00 Hollow drill bars and rods, of alloy or non-alloy steel 4,050 N/A 4,050 4,455 4,860 5,265 (F) 7229 Wire of alloy steel other than stainless, in coils (excl. bars and rods) 4,050 N/A 4,050 4,455 4,860 5,265 (C)/(F) 7301 Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel 2,144 N/A 2,144 2,358 2,573 2,787 (C) 7302 Railway or tramway track construction material of iron or steel, the following : rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers "cross-ties", fish-plates, chairs, chair wedges, sole plates "base plates", rail clips, bedplates, ties and other material specialised for jointing or fixing rails 3,674 N/A 3,674 4,041 4,409 4,776 (C) 7303 Tubes, pipes and hollow profiles, of cast iron see below N/A see below see below see below see below   7303 00 Tubes, pipes and hollow profiles, of cast iron 2,154 N/A 2,154 2,369 2,585 2,800   7304 Tubes, pipes and hollow profiles, seamless, of iron or steel (excl. products of cast iron) see below N/A see below see below see below see below   7304 11 00 Line pipe of a kind used for oil or gas pipelines, seamless, of stainless steel 4,084 N/A 4,084 4,492 4,901 5,309   7304 19 Line pipe of a kind used for oil or gas pipelines, seamless, of iron or steel (excl. products of stainless steel or of cast iron) 2,154 N/A 2,154 2,369 2,585 2,800 (C) 7304 22 00 Drill pipe, seamless, of stainless steel, of a kind used in drilling for oil or gas 4,084 N/A 4,084 4,492 4,901 5,309   7304 23 00 Drill pipe, seamless, of a kind used in drilling for oil or gas, of iron or steel (excl. products of stainless steel or of cast iron) 2,154 N/A 2,154 2,369 2,585 2,800 (C) 7304 24 00 Casing and tubing, seamless, of a kind used for drilling for oil or gas, of stainless steel 4,084 N/A 4,084 4,492 4,901 5,309   7304 29 Casing and tubing, seamless, of iron or steel, of a kind used in drilling for oil or gas (excl. products of cast iron) 2,154 N/A 2,154 2,369 2,585 2,800 (C) 7304 31 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" (excl. cast iron products and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used for drilling for oil or gas) 2,154 N/A 2,154 2,369 2,585 2,800 (C) 7304 39 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, not cold-drawn or cold-rolled "cold-reduced" (excl. cast iron products, line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas) 2,154 N/A 2,154 2,369 2,585 2,800 (C) 7304 41 00 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas) 4,084 N/A 4,084 4,492 4,901 5,309   7304 49 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines or of a kind used for drilling for oil or gas) 4,084 N/A 4,084 4,492 4,901 5,309   7304 51 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil) 2,144 N/A 2,144 2,358 2,573 2,787 (F) 7304 59 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil) 2,144 N/A 2,144 2,358 2,573 2,787 (C)/(F) 7304 90 00 Tubes, pipes and hollow profiles, seamless, of non-circular cross-section, of iron or steel (excl. products of cast iron) 2,154 N/A 2,154 2,369 2,585 2,800 (C) 7305 Tubes and pipes, having circular cross-sections and an external diameter of > 406,4 mm, of flat-rolled products of iron or steel "e.g., welded, riveted or similarly closed" 2,154 N/A 2,154 2,369 2,585 2,800 (C) 7306 Tubes, pipes and hollow profiles "e.g., open seam or welded, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless tubes and pipes and tubes having internal and external circular cross-sections and an external diameter of > 406,4 mm) see below N/A see below see below see below see below   7306 11 00 Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm 4,114 N/A 4,114 4,525 4,937 5,348   7306 19 00 Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron) 2,164 N/A 2,164 2,380 2,597 2,813 (C) 7306 21 00 Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm 4,114 N/A 4,114 4,525 4,937 5,348   7306 29 00 Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron) 2,164 N/A 2,164 2,380 2,597 2,813 (C) 7306 30 12 Precision tubes, welded, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" 2,164 N/A 2,164 2,380 2,597 2,813 (C) 7306 30 18 Precision tubes, welded, of circular cross-section, of iron or non-alloy steel (excl. cold-drawn or cold-rolled) 2,144 N/A 2,144 2,358 2,573 2,787   7306 30 41 Threaded or threadable tubes "gas pipe", welded, of circular cross-section, of iron or non-alloy steel, plated or coated with zinc 2,164 N/A 2,164 2,380 2,597 2,813 (C) 7306 30 49 Threaded or threadable tubes "gas pipe", welded, of circular cross-section, of iron or non-alloy steel (excl. products plated or coated with zinc) 2,164 N/A 2,164 2,380 2,597 2,813 (C) 7306 30 72 Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel, of an external diameter of <= 168,3 mm, plated or coated with zinc (excl. line pipe of a kind used for oil or gas pipelines or casing and tubingof a kind used in drilling for oil or gas) 2,164 N/A 2,164 2,380 2,597 2,813 (C) 7306 30 77 Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel of an external diameter of <= 168,3 mm (excl. plated or coated with zinc and line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used in drilling for oil or gas, precision tubes and threaded or threadable tubes "gas pipe") 2,164 N/A 2,164 2,380 2,597 2,813 (C) 7306 30 80 Tubes, pipes and hollow profiles, welded, having a circular cross-section, of iron or steel, of an external diameter of > 168,3 mm but <= 406,4 mm (excl. line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, or precision steel tubes, electrical conduit tubes or threaded or threadable tubes "gas pipe") 2,164 N/A 2,164 2,380 2,597 2,813 (C) 7306 40 20 Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. products having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) 4,114 N/A 4,114 4,525 4,937 5,348   7306 40 80 Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel (excl. products cold-drawn or cold-rolled "cold-reduced", tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) 4,094 N/A 4,094 4,503 4,913 5,322   7306 50 21 Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" 2,184 N/A 2,184 2,402 2,621 2,839 (F) 7306 50 29 Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless (excl. cold-drawn or cold-rolled) 2,164 N/A 2,164 2,380 2,597 2,813 (F) 7306 50 80 Tubes, pipes and hollow profiles, welded, of circular cross-section, of alloy steel other than stainless (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and precision steel tubes) 2,184 N/A 2,184 2,402 2,621 2,839 (F) 7306 61 10 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel 4,114 N/A 4,114 4,525 4,937 5,348   7306 61 92 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of <= 2 mm 2,164 N/A 2,164 2,380 2,597 2,813 (C) 7306 61 99 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of > 2 mm 2,164 N/A 2,164 2,380 2,597 2,813 (C) 7306 69 10 Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) 4,114 N/A 4,114 4,525 4,937 5,348   7306 69 90 Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of iron or steel other than stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) 2,164 N/A 2,164 2,380 2,597 2,813 (C) 7306 90 00 Tubes, pipes and hollow profiles "e.g., open seam, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless or welded tubes and pipes and tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm) 2,164 N/A 2,164 2,380 2,597 2,813 (C) 7307 Tube or pipe fittings "e.g. couplings, elbows, sleeves", of iron or steel see below N/A see below see below see below see below   7307 11 Tube or pipe fittings of non-malleable cast iron 2,194 N/A 2,194 2,413 2,633 2,852   7307 19 10 Tube or pipe fittings of cast iron (excl. of non-malleable) 2,194 N/A 2,194 2,413 2,633 2,852   7307 19 90 Cast tube or pipe fittings of steel 2,274 N/A 2,274 2,501 2,729 2,956 (C) 7307 21 00 Flanges of stainless steel (excl. cast products) 3,774 N/A 3,774 4,151 4,529 4,906   7307 22 Threaded elbows, bends and sleeves of stainless steel (excl. cast products) 3,774 N/A 3,774 4,151 4,529 4,906   7307 23 Butt welding tube or pipe fittings of stainless steel (excl. cast products) 3,774 N/A 3,774 4,151 4,529 4,906   7307 29 Tube or pipe fittings of stainless steel (excl. cast products, flanges, threaded elbows, bends and sleeves and butt weldings fittings) 3,774 N/A 3,774 4,151 4,529 4,906   7307 91 00 Flanges of iron or steel (excl. cast or stainless products) 2,134 N/A 2,134 2,347 2,561 2,774 (C) 7307 92 Threaded elbows, bends and sleeves, of stainless steel (excl. cast or stainless products) 2,134 N/A 2,134 2,347 2,561 2,774 (C) 7307 93 Butt welding fittings of iron or steel (excl. cast iron or stainless steel products, and flanges) 2,134 N/A 2,134 2,347 2,561 2,774 (C) 7307 99 Tube or pipe fittings, of iron or steel (excl. cast iron or stainless steel products; flanges; threaded elbows, bends and sleeves; butt welding fittings) 2,134 N/A 2,134 2,347 2,561 2,774 (C) 7308 Structures and parts of structures "e.g., bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns", of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel (excl. prefabricated buildings of heading 9406) 3,864 N/A 3,864 4,250 4,637 5,023 (C) 7309 Reservoirs, tanks, vats and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of > 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated (excl. containers specifically constructed or equipped for one or more types of transport) 4,124 N/A 4,124 4,536 4,949 5,361 (C) 7310 Tanks, casks, drums, cans, boxes and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of <= 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated, n.e.s. 2,164 N/A 2,164 2,380 2,597 2,813 (C) 7311 Containers of iron or steel, for compressed or liquefied gas (excl. containers specifically constructed or equipped for one or more types of transport) see below N/A see below see below see below see below   7311 00 Containers of iron or steel, for compressed or liquefied gas (excl. containers specifically constructed or equipped for one or more types of transport) 4,104 N/A 4,104 4,514 4,925 5,335 (C) 7318 Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers, incl. spring washers, and similar articles, of iron or steel (excl. lag screws, stoppers, plugs and the like, threaded) see below N/A see below see below see below see below   7318 11 00 Coach screws of iron or steel 2,124 N/A 2,124 2,336 2,549 2,761 (C) 7318 12 10 Wood screws of stainless steel (excl. coach screws) 4,074 N/A 4,074 4,481 4,889 5,296 (C) 7318 12 90 Wood screws of iron or steel other than stainless (excl. coach screws) 2,124 N/A 2,124 2,336 2,549 2,761 (C) 7318 13 00 Screw hooks and screw rings, of iron or steel 2,124 N/A 2,124 2,336 2,549 2,761 (C) 7318 14 10 Self-tapping screws, of stainless steel (excl. wood screws) 4,074 N/A 4,074 4,481 4,889 5,296 (C) 7318 14 91 Spaced-thread screws of iron or steel other than stainless 2,124 N/A 2,124 2,336 2,549 2,761 (C) 7318 14 99 Self-tapping screws of iron or steel other than stainless (excl. spaced-thread screws and wood screws) 2,124 N/A 2,124 2,336 2,549 2,761 (C) 7318 15 Threaded screws and bolts, of iron or steel, whether or not with their nuts and washers (excl. coach screws and other wood screws, screw hooks and screw rings, self-tapping screws, lag screws, stoppers, plugs and the like, threaded) 3,474 N/A 3,474 3,821 4,169 4,516 (C) 7318 16 Nuts of iron or steel 4,104 N/A 4,104 4,514 4,925 5,335 (C) 7318 19 00 Threaded articles, of iron or steel, n.e.s. 2,124 N/A 2,124 2,336 2,549 2,761 (C) 7318 21 00 Spring washers and other lock washers, of iron or steel 2,124 N/A 2,124 2,336 2,549 2,761 (C) 7318 22 00 Washers of iron or steel (excl. spring washers and other lock washers) 2,484 N/A 2,484 2,732 2,981 3,229 (C) 7318 23 00 Rivets of iron or steel (excl. tubular and bifurcated rivets for particular uses) 2,344 N/A 2,344 2,578 2,813 3,047 (C) 7318 24 00 Cotters and cotter pins, of iron or steel 2,124 N/A 2,124 2,336 2,549 2,761 (C) 7318 29 00 Non-threaded articles, of iron or steel 2,124 N/A 2,124 2,336 2,549 2,761 (C) 7326 Articles of iron or steel, n.e.s. (excl. cast articles) see below N/A see below see below see below see below   7326 11 00 Grinding balls and similar articles for mills, of iron or steel, forged or stamped, but not further worked 2,274 N/A 2,274 2,501 2,729 2,956 (C) 7326 19 Articles of iron or steel, forged or stamped, but not further worked, n.e.s. (excl. grinding balls and similar articles for mills) 2,274 N/A 2,274 2,501 2,729 2,956 (C) 7326 20 00 Articles of iron or steel wire, n.e.s. 2,124 N/A 2,124 2,336 2,549 2,761 (C) 7326 90 30 Ladders and steps, of iron or steel 2,124 N/A 2,124 2,336 2,549 2,761 (C) 7326 90 40 Pallets and similar platforms for handling goods, of iron or steel 2,124 N/A 2,124 2,336 2,549 2,761 (C) 7326 90 50 Reels for cables, piping and the like, of iron or steel 2,124 N/A 2,124 2,336 2,549 2,761 (C) 7326 90 60 Ventilators, non-mechanical, guttering, hooks and like articles used in the building industry, n.e.s., of iron or steel 2,124 N/A 2,124 2,336 2,549 2,761 (C) 7326 90 92 Articles of iron or steel, open-die forged, n.e.s. 2,274 N/A 2,274 2,501 2,729 2,956 (C) 7326 90 94 Articles of iron or steel, closed-die forged, n.e.s. 2,274 N/A 2,274 2,501 2,729 2,956 (C) 7326 90 96 Sintered articles of iron or steel, n.e.s. 2,274 N/A 2,274 2,501 2,729 2,956 (C) 7326 90 98 Articles of iron or steel, n.e.s. 2,144 N/A 2,144 2,358 2,573 2,787 (C) Sri Lanka Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – – – –   2523 10 00 White clinker – – – – – –   2523 10 00 Grey clinker 0,870 0,040 0,900 0,990 1,080 1,170 (A) 2523 21 00 White Portland cement – – – – – –   2523 29 00 Grey Portland cement 1 0,060 1,060 1,166 1,272 1,378   2523 90 00 White hydraulic cements – – – – – –   2523 90 00 Grey hydraulic cements 0,950 0,070 1,020 1,122 1,224 1,326 (A) 2523 30 00 Aluminous cement – – – – – –   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 2,040 0,070 2,110 2,131 2,131 2,131   2814 10 00 Anhydrous ammonia – – – – – –   2814 20 00 Ammonia in aqueous solution 0,700 0,060 0,770 0,778 0,778 0,778   2834 21 00 Nitrate of potassium 1,780 0,100 1,880 1,899 1,899 1,899   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,520 0,050 0,570 0,576 0,576 0,576   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,860 0,050 0,920 0,929 0,929 0,929   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,570 0,150 1,720 1,737 1,737 1,737   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,540 0,150 1,690 1,707 1,707 1,707   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,680 0,100 0,790 0,798 0,798 0,798   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,250 0,120 1,370 1,384 1,384 1,384   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,360 0,090 1,450 1,465 1,465 1,465   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,080 0,140 2,230 2,252 2,252 2,252   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,800 0,130 1,920 1,939 1,939 1,939   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,800 0,130 1,920 1,939 1,939 1,939   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 3,180 0,100 3,290 3,323 3,323 3,323   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,750 0,120 1,870 1,889 1,889 1,889   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,430 0,120 1,550 1,566 1,566 1,566   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,560 0,140 1,690 1,707 1,707 1,707   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,740 0,100 0,840 0,848 0,848 0,848   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,900 0,120 1,020 1,030 1,030 1,030   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,610 0,090 0,700 0,707 0,707 0,707   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,550 0,080 0,630 0,636 0,636 0,636   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,350 0,060 0,410 0,414 0,414 0,414   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,230 0,150 1,380 1,394 1,394 1,394   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,630 0,120 0,750 0,758 0,758 0,758   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,190 0,100 1,290 1,303 1,303 1,303   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,610 0,060 0,680 0,687 0,687 0,687   Aluminium         10 % mark-up 20 % mark-up 30 % mark-up   7601 Unwrought aluminium 0,360 N/A 0,360 0,396 0,432 0,468 (L) 7603 Aluminium powders and flakes 1,050 N/A 1,050 1,155 1,260 1,365 (L) 7604 10 10 Bars and rods 1,280 N/A 1,280 1,408 1,536 1,664 (L) 7604 10 90 Profiles 1,290 N/A 1,290 1,419 1,548 1,677 (L) 7604 21 00 Hollow profiles 1,290 N/A 1,290 1,419 1,548 1,677 (L) 7604 29 10 Bars and rods 1,280 N/A 1,280 1,408 1,536 1,664 (L) 7604 29 90 Profiles 1,290 N/A 1,290 1,419 1,548 1,677 (L) 7605 Aluminium wire 1,280 N/A 1,280 1,408 1,536 1,664 (L) 7606 Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm 1,730 N/A 1,730 1,903 2,076 2,249 (L) 7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm 1,730 N/A 1,730 1,903 2,076 2,249 (L) 7608 Aluminium tubes and pipes 1,290 N/A 1,290 1,419 1,548 1,677 (L) 7609 00 00 Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) 1,290 N/A 1,290 1,419 1,548 1,677 (L) 7610 10 00 Doors, windows and their frames and thresholds for doors 1,290 N/A 1,290 1,419 1,548 1,677 (L) 7610 90 Other 1,290 N/A 1,290 1,419 1,548 1,677 (L) 7610 90 10 Bridges and bridge-sections, towers and lattice masts 1,290 N/A 1,290 1,419 1,548 1,677 (L) 7610 90 90 Other 1,290 N/A 1,290 1,419 1,548 1,677 (L) 7611 00 00 Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 1,730 N/A 1,730 1,903 2,076 2,249 (L) 7612 Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 1,730 N/A 1,730 1,903 2,076 2,249 (L) 7613 00 00 Aluminium containers for compressed or liquefied gas 1,730 N/A 1,730 1,903 2,076 2,249 (L) 7614 Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated 1,280 N/A 1,280 1,408 1,536 1,664 (L) 7616 10 00 Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles 1,730 N/A 1,730 1,903 2,076 2,249 (L) 7616 91 00 Cloth, grill, netting and fencing, of aluminium wire 1,730 N/A 1,730 1,903 2,076 2,249 (L) 7616 99 10 Cast 1,050 N/A 1,050 1,155 1,260 1,365 (L) 7616 99 90 Other 1,730 N/A 1,730 1,903 2,076 2,249 (L) Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066   Sudan Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – – – –   2523 10 00 White clinker – – – – – –   2523 10 00 Grey clinker 0,850 0,020 0,870 0,957 1,044 1,131 (A) 2523 21 00 White Portland cement – – – – – –   2523 29 00 Grey Portland cement 0,860 0,040 0,900 0,990 1,080 1,170   2523 90 00 White hydraulic cements – – – – – –   2523 90 00 Grey hydraulic cements 0,820 0,040 0,870 0,957 1,044 1,131 (A) 2523 30 00 Aluminous cement – – – – – –   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 1,920 0,040 1,960 1,980 1,980 1,980   2814 10 00 Anhydrous ammonia – – – – – –   2814 20 00 Ammonia in aqueous solution 0,610 0,030 0,640 0,646 0,646 0,646   2834 21 00 Nitrate of potassium 1,650 0,050 1,700 1,717 1,717 1,717   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,460 0,030 0,490 0,495 0,495 0,495   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,770 0,030 0,790 0,798 0,798 0,798   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,400 0,080 1,480 1,495 1,495 1,495   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,360 0,080 1,440 1,454 1,454 1,454   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,600 0,050 0,660 0,667 0,667 0,667   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,140 0,060 1,200 1,212 1,212 1,212   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,260 0,050 1,300 1,313 1,313 1,313   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,930 0,070 2,010 2,030 2,030 2,030   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,670 0,070 1,740 1,757 1,757 1,757   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,670 0,070 1,740 1,757 1,757 1,757   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 3 0,060 3,060 3,091 3,091 3,091   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,620 0,060 1,680 1,697 1,697 1,697   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,300 0,060 1,360 1,374 1,374 1,374   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,410 0,070 1,480 1,495 1,495 1,495   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,670 0,050 0,730 0,737 0,737 0,737   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,840 0,060 0,900 0,909 0,909 0,909   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,570 0,050 0,610 0,616 0,616 0,616   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,480 0,040 0,520 0,525 0,525 0,525   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,310 0,030 0,340 0,343 0,343 0,343   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,140 0,080 1,220 1,232 1,232 1,232   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,560 0,080 0,640 0,646 0,646 0,646   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,100 0,050 1,150 1,162 1,162 1,162   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,570 0,030 0,600 0,606 0,606 0,606   Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066   Suriname Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – – – –   2523 10 00 White clinker – – – – – –   2523 10 00 Grey clinker – – – – – –   2523 21 00 White Portland cement – – – – – –   2523 29 00 Grey Portland cement 1,180 0,060 1,240 1,364 1,488 1,612   2523 90 00 White hydraulic cements – – – – – –   2523 90 00 Grey hydraulic cements 1,120 0,060 1,180 1,298 1,416 1,534 (A) 2523 30 00 Aluminous cement – – – – – –   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 1,800 0,040 1,840 1,858 1,858 1,858   2814 10 00 Anhydrous ammonia – – – – – –   2814 20 00 Ammonia in aqueous solution 0,680 0,040 0,720 0,727 0,727 0,727   2834 21 00 Nitrate of potassium 1,580 0,060 1,630 1,646 1,646 1,646   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,430 0,030 0,450 0,455 0,455 0,455   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,710 0,030 0,730 0,737 0,737 0,737   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,280 0,080 1,360 1,374 1,374 1,374   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,260 0,080 1,340 1,353 1,353 1,353   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,580 0,040 0,620 0,626 0,626 0,626   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,080 0,050 1,130 1,141 1,141 1,141   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,180 0,040 1,220 1,232 1,232 1,232   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,810 0,060 1,880 1,899 1,899 1,899   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,520 0,050 1,570 1,586 1,586 1,586   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,520 0,050 1,570 1,586 1,586 1,586   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,800 0,070 2,870 2,899 2,899 2,899   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,520 0,050 1,570 1,586 1,586 1,586   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,230 0,050 1,280 1,293 1,293 1,293   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,300 0,060 1,370 1,384 1,384 1,384   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,630 0,030 0,660 0,667 0,667 0,667   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,750 0,030 0,780 0,788 0,788 0,788   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,500 0,020 0,520 0,525 0,525 0,525   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,500 0,030 0,530 0,535 0,535 0,535   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,300 0,020 0,320 0,323 0,323 0,323   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,030 0,040 1,070 1,081 1,081 1,081   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,520 0,030 0,550 0,556 0,556 0,556   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,030 0,040 1,070 1,081 1,081 1,081   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,520 0,020 0,530 0,535 0,535 0,535   Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066   Syria Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – – – –   2523 10 00 White clinker – – – – – –   2523 10 00 Grey clinker 1,280 0,050 1,330 1,463 1,596 1,729 (A) 2523 21 00 White Portland cement – – – – – –   2523 29 00 Grey Portland cement 1,280 0,100 1,380 1,518 1,656 1,794   2523 90 00 White hydraulic cements – – – – – –   2523 90 00 Grey hydraulic cements 1,220 0,100 1,320 1,452 1,584 1,716 (A) 2523 30 00 Aluminous cement – – – – – –   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 2,460 0,060 2,520 2,545 2,545 2,545   2814 10 00 Anhydrous ammonia 1,970 0,180 2,140 2,161 2,161 2,161   2814 20 00 Ammonia in aqueous solution 0,590 0,050 0,640 0,646 0,646 0,646   2834 21 00 Nitrate of potassium 1,990 0,080 2,080 2,101 2,101 2,101   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,440 0,050 0,490 0,495 0,495 0,495   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,740 0,050 0,780 0,788 0,788 0,788   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,340 0,140 1,480 1,495 1,495 1,495   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,310 0,140 1,450 1,465 1,465 1,465   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,580 0,110 0,690 0,697 0,697 0,697   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,280 0,120 1,400 1,414 1,414 1,414   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,510 0,090 1,600 1,616 1,616 1,616   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,320 0,140 2,460 2,485 2,485 2,485   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,990 0,130 2,120 2,141 2,141 2,141   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,990 0,130 2,120 2,141 2,141 2,141   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 3,840 0,090 3,930 3,969 3,969 3,969   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,940 0,120 2,070 2,091 2,091 2,091   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,460 0,110 1,570 1,586 1,586 1,586   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,500 0,130 1,630 1,646 1,646 1,646   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,740 0,110 0,850 0,859 0,859 0,859   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,980 0,130 1,110 1,121 1,121 1,121   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,660 0,100 0,760 0,768 0,768 0,768   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,460 0,080 0,540 0,545 0,545 0,545   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,300 0,060 0,360 0,364 0,364 0,364   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,340 0,160 1,510 1,525 1,525 1,525   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,540 0,120 0,660 0,667 0,667 0,667   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,310 0,100 1,410 1,424 1,424 1,424   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,670 0,070 0,740 0,747 0,747 0,747   Aluminium         10 % mark-up 20 % mark-up 30 % mark-up   7601 Unwrought aluminium 0,360 N/A 0,360 0,396 0,432 0,468 (L) 7603 Aluminium powders and flakes 0,490 N/A 0,490 0,539 0,588 0,637 (L) 7604 10 10 Bars and rods 0,710 N/A 0,710 0,781 0,852 0,923 (L) 7604 10 90 Profiles 0,730 N/A 0,730 0,803 0,876 0,949 (L) 7604 21 00 Hollow profiles 0,730 N/A 0,730 0,803 0,876 0,949 (L) 7604 29 10 Bars and rods 0,710 N/A 0,710 0,781 0,852 0,923 (L) 7604 29 90 Profiles 0,730 N/A 0,730 0,803 0,876 0,949 (L) 7605 Aluminium wire 0,710 N/A 0,710 0,781 0,852 0,923 (L) 7606 Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm 1,170 N/A 1,170 1,287 1,404 1,521 (L) 7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm 1,170 N/A 1,170 1,287 1,404 1,521 (L) 7608 Aluminium tubes and pipes 0,730 N/A 0,730 0,803 0,876 0,949 (L) 7609 00 00 Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) 0,730 N/A 0,730 0,803 0,876 0,949 (L) 7610 10 00 Doors, windows and their frames and thresholds for doors 0,730 N/A 0,730 0,803 0,876 0,949 (L) 7610 90 Other 0,730 N/A 0,730 0,803 0,876 0,949 (L) 7610 90 10 Bridges and bridge-sections, towers and lattice masts 0,730 N/A 0,730 0,803 0,876 0,949 (L) 7610 90 90 Other 0,730 N/A 0,730 0,803 0,876 0,949 (L) 7611 00 00 Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 1,170 N/A 1,170 1,287 1,404 1,521 (L) 7612 Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 1,170 N/A 1,170 1,287 1,404 1,521 (L) 7613 00 00 Aluminium containers for compressed or liquefied gas 1,170 N/A 1,170 1,287 1,404 1,521 (L) 7614 Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated 0,710 N/A 0,710 0,781 0,852 0,923 (L) 7616 10 00 Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles 1,170 N/A 1,170 1,287 1,404 1,521 (L) 7616 91 00 Cloth, grill, netting and fencing, of aluminium wire 1,170 N/A 1,170 1,287 1,404 1,521 (L) 7616 99 10 Cast 0,490 N/A 0,490 0,539 0,588 0,637 (L) 7616 99 90 Other 1,170 N/A 1,170 1,287 1,404 1,521 (L) Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066   Taiwan Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – – – –   2523 10 00 White clinker – – – – – –   2523 10 00 Grey clinker 0,830 0,040 0,860 0,946 1,032 1,118 (A) 2523 21 00 White Portland cement – – – – – –   2523 29 00 Grey Portland cement 0,830 0,070 0,890 0,979 1,068 1,157   2523 90 00 White hydraulic cements – – – – – –   2523 90 00 Grey hydraulic cements – – – – – –   2523 30 00 Aluminous cement – – – – – –   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 2,110 0,050 2,160 2,182 2,182 2,182   2814 10 00 Anhydrous ammonia 2,050 0,150 2,200 2,222 2,222 2,222   2814 20 00 Ammonia in aqueous solution 0,620 0,040 0,660 0,667 0,667 0,667   2834 21 00 Nitrate of potassium 1,760 0,070 1,830 1,848 1,848 1,848   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,420 0,040 0,460 0,465 0,465 0,465   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,700 0,040 0,740 0,747 0,747 0,747   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,270 0,120 1,390 1,404 1,404 1,404   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,240 0,120 1,360 1,374 1,374 1,374   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,580 0,090 0,660 0,667 0,667 0,667   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,170 0,100 1,270 1,283 1,283 1,283   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,330 0,080 1,410 1,424 1,424 1,424   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,050 0,120 2,170 2,192 2,192 2,192   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,740 0,110 1,850 1,869 1,869 1,869   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,740 0,110 1,850 1,869 1,869 1,869   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 3,300 0,080 3,370 3,404 3,404 3,404   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,720 0,100 1,820 1,838 1,838 1,838   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,320 0,090 1,410 1,424 1,424 1,424   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,370 0,110 1,480 1,495 1,495 1,495   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,680 0,090 0,770 0,778 0,778 0,778   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,860 0,110 0,970 0,980 0,980 0,980   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,580 0,080 0,670 0,677 0,677 0,677   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,480 0,070 0,540 0,545 0,545 0,545   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,300 0,050 0,360 0,364 0,364 0,364   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,180 0,130 1,320 1,333 1,333 1,333   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,530 0,100 0,640 0,646 0,646 0,646   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,160 0,080 1,250 1,263 1,263 1,263   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,600 0,060 0,650 0,657 0,657 0,657   Aluminium         10 % mark-up 20 % mark-up 30 % mark-up   7601 Unwrought aluminium 0,360 N/A 0,360 0,396 0,432 0,468 (L) 7603 Aluminium powders and flakes 0,470 N/A 0,470 0,517 0,564 0,611 (L) 7604 10 10 Bars and rods 0,690 N/A 0,690 0,759 0,828 0,897 (L) 7604 10 90 Profiles 0,710 N/A 0,710 0,781 0,852 0,923 (L) 7604 21 00 Hollow profiles 0,710 N/A 0,710 0,781 0,852 0,923 (L) 7604 29 10 Bars and rods 0,690 N/A 0,690 0,759 0,828 0,897 (L) 7604 29 90 Profiles 0,710 N/A 0,710 0,781 0,852 0,923 (L) 7605 Aluminium wire 0,690 N/A 0,690 0,759 0,828 0,897 (L) 7606 Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm 1,150 N/A 1,150 1,265 1,380 1,495 (L) 7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm 1,150 N/A 1,150 1,265 1,380 1,495 (L) 7608 Aluminium tubes and pipes 0,710 N/A 0,710 0,781 0,852 0,923 (L) 7609 00 00 Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) 0,710 N/A 0,710 0,781 0,852 0,923 (L) 7610 10 00 Doors, windows and their frames and thresholds for doors 0,710 N/A 0,710 0,781 0,852 0,923 (L) 7610 90 Other 0,710 N/A 0,710 0,781 0,852 0,923 (L) 7610 90 10 Bridges and bridge-sections, towers and lattice masts 0,710 N/A 0,710 0,781 0,852 0,923 (L) 7610 90 90 Other 0,710 N/A 0,710 0,781 0,852 0,923 (L) 7611 00 00 Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 1,150 N/A 1,150 1,265 1,380 1,495 (L) 7612 Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 1,150 N/A 1,150 1,265 1,380 1,495 (L) 7613 00 00 Aluminium containers for compressed or liquefied gas 1,150 N/A 1,150 1,265 1,380 1,495 (L) 7614 Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated 0,690 N/A 0,690 0,759 0,828 0,897 (L) 7616 10 00 Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles 1,150 N/A 1,150 1,265 1,380 1,495 (L) 7616 91 00 Cloth, grill, netting and fencing, of aluminium wire 1,150 N/A 1,150 1,265 1,380 1,495 (L) 7616 99 10 Cast 0,470 N/A 0,470 0,517 0,564 0,611 (L) 7616 99 90 Other 1,150 N/A 1,150 1,265 1,380 1,495 (L) Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066   Iron and steel         10 % mark-up 20 % mark-up 30 % mark-up   2601 12 00 Agglomerated iron ores and concentrates (excl. roasted iron pyrites) 0,180 0,040 0,220 0,242 0,264 0,286   7201 Pig iron and spiegeleisen, in pigs, blocks or other primary forms 1,860 N/A 1,860 2,046 2,232 2,418   7202 11 Ferro-manganese, containing by weight > 2% of carbon – N/A – – – –   7202 19 Ferro-manganese, containing by weight <= 2% carbon – N/A – – – –   7202 41 Ferro-chromium, containing by weight > 4% of carbon – N/A – – – –   7202 49 Ferro-chromium, containing by weight <= 4% of carbon – N/A – – – –   7202 60 00 Ferro-nickel – N/A – – – –   7203 Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99,94%, in lumps, pellets or similar forms – N/A – – – –   7205 Granules and powders of pig iron, spiegeleisen, iron or steel (excl. granules and powders of ferro-alloys, turnings and filings of iron or steel, radioactive iron powders "isotopes" and certain low-calibre, substandard balls for ballbearings) 1,870 N/A 1,870 2,057 2,244 2,431 (C) 7206 Iron and non-alloy steel in ingots or other primary forms (excl. remelting scrap ingots, products obtained by continuous casting and iron of heading 7203) see below N/A see below see below see below see below   7206 10 00 Ingots, of iron and non-alloy steel (excl. remelted scrap ingots, continuous cast products, iron of heading 7203) 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7206 90 00 Iron and non-alloy steel, in puddled bars or other primary forms (excl. ingots, remelted scrap ingots, continuous cast products, iron of heading 7203) 1,940 N/A 1,940 2,134 2,328 2,522 (C) 7207 Semi-finished products of iron or non-alloy steel see below N/A see below see below see below see below   7207 11 11 Semi-finished products, of non-alloy free-cutting steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting 2,298 N/A 2,298 2,528 2,757 2,987 (C) 7207 11 14 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness of <= 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel) 2,298 N/A 2,298 2,528 2,757 2,987 (C) 7207 11 16 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness of > 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel) 2,298 N/A 2,298 2,528 2,757 2,987 (C) 7207 11 90 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular cross-section, the width < twice the thickness, forged 2,474 N/A 2,474 2,721 2,968 3,216 (C) 7207 12 10 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtained by continuous casting 2,298 N/A 2,298 2,528 2,757 2,987 (C) 7207 12 90 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular "other than square" cross-section, the width >= twice the thickness, forged 2,474 N/A 2,474 2,721 2,968 3,216 (C) 7207 19 12 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting 2,298 N/A 2,298 2,528 2,757 2,987 (C) 7207 19 19 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, forged 2,474 N/A 2,474 2,721 2,968 3,216 (C) 7207 19 80 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon (excl. semi-products, of square, rectangular, circular or polygonal cross-section) 2,298 N/A 2,298 2,528 2,757 2,987 (C) 7207 20 11 Semi-finished products, of non-alloy free-cutting steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting 2,298 N/A 2,298 2,528 2,757 2,987 (C) 7207 20 15 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% but < 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel) 2,298 N/A 2,298 2,528 2,757 2,987 (C) 7207 20 17 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel) 2,298 N/A 2,298 2,528 2,757 2,987 (C) 7207 20 19 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, forged 2,474 N/A 2,474 2,721 2,968 3,216 (C) 7207 20 32 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtained by continuous casting 2,298 N/A 2,298 2,528 2,757 2,987 (C) 7207 20 39 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of rectangular "other than square" cross-section and the width >= twice the thickness, forged 2,474 N/A 2,474 2,721 2,968 3,216 (C) 7207 20 52 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting 2,298 N/A 2,298 2,528 2,757 2,987 (C) 7207 20 59 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of circular or polygonal cross-section, forged 2,474 N/A 2,474 2,721 2,968 3,216 (C) 7207 20 80 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon (excl. those of square, rectangular, circular or polygonal cross-section) 2,298 N/A 2,298 2,528 2,757 2,987 (C) 7208 Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled, not clad, plated or coated 2,310 N/A 2,310 2,541 2,771 3,002 (C) 7209 Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, cold-rolled "cold-reduced", not clad, plated or coated 2,333 N/A 2,333 2,566 2,800 3,033 (C) 7210 Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated 2,333 N/A 2,333 2,566 2,800 3,033 (C) 7211 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", not clad, plated or coated see below N/A see below see below see below see below   7211 13 00 Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as "wide flats" 2,310 N/A 2,310 2,541 2,771 3,002 (C) 7211 14 00 Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, not further worked than hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm (excl. "wide flats") 2,310 N/A 2,310 2,541 2,771 3,002 (C) 7211 19 00 Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, simply hot-rolled, not clad, plated or coated, of a thickness < 4,75 mm (excl. "wide flats") 2,310 N/A 2,310 2,541 2,771 3,002 (C) 7211 23 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight < 0,25% of carbon 2,333 N/A 2,333 2,566 2,800 3,033 (C) 7211 29 00 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight >= 0,25% of carbon 2,333 N/A 2,333 2,566 2,800 3,033 (C) 7211 90 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked, but not clad, plated or coated 2,333 N/A 2,333 2,566 2,800 3,033 (C) 7212 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated 2,333 N/A 2,333 2,566 2,800 3,033 (C) 7213 Bars and rods of iron or non-alloy steel, hot-rolled, in irregularly wound coils 2,298 N/A 2,298 2,528 2,757 2,987 (C) 7214 Bars and rods, of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but incl. those twisted after rolling (excl. in irregularly wound coils) see below N/A see below see below see below see below   7214 10 00 Bars and rods, of iron or non-alloy steel, not further worked than forged (excl. in irregularly wound coils) 2,474 N/A 2,474 2,721 2,968 3,216 (C) 7214 20 00 Bars and rods, of iron or non-alloy steel, with indentations, ribs, groves or other deformations produced during the rolling process 2,298 N/A 2,298 2,528 2,757 2,987 (C) 7214 30 00 Bars and rods, of non-alloy free-cutting steel, not further worked than hot-rolled, hot-drawn or hot-extruded (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling) 2,298 N/A 2,298 2,528 2,757 2,987 (C) 7214 91 Bars and rods, of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, of rectangular "other than square" cross-section (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process, bars and rods twisted after rolling and free-cutting steel) 2,298 N/A 2,298 2,528 2,757 2,987 (C) 7214 99 Bars and rods, of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded (excl. of rectangular [other than square] cross-section and those containing indentations, ribs, grooves or other deformations produced during the rolling process, and of non-alloy free-cutting steel) 2,298 N/A 2,298 2,528 2,757 2,987 (C) 7215 Bars and rods, of iron or non-alloy steel, cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked, n.e.s. 2,298 N/A 2,298 2,528 2,757 2,987 (C) 7216 Angles, shapes and sections of iron or non-alloy steel, n.e.s. 2,298 N/A 2,298 2,528 2,757 2,987 (C) 7217 Wire of iron or non-alloy steel, in coils (excl. bars and rods) see below N/A see below see below see below see below   7217 10 Wire of iron or non-alloy steel, in coils, not plated or coated, whether or not polished (excl. bars and rods) 2,298 N/A 2,298 2,528 2,757 2,987 (C) 7217 20 Wire of iron or non-alloy steel, in coils, plated or coated with zinc (excl. bars and rods) 2,298 N/A 2,298 2,528 2,757 2,987 (C) 7217 30 Wire of iron or non-alloy steel, in coils, plated or coated with base metals (excl. plated or coated with zinc, and bars and rods) 2,298 N/A 2,298 2,528 2,757 2,987 (C) 7217 90 Wire of iron or non-alloy steel, in coils, plated or coated (excl. plated or coated with base metals, and bars and rods) 2,298 N/A 2,298 2,528 2,757 2,987 (C) 7218 Stainless steel in ingots or other primary forms (excl. remelting scrap ingots and products obtained by continuous casting); semi-finished products of stainless steel 8,670 see below see below see below see below see below   7218 10 00 Steel, stainless, in ingots and other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) 8,670 N/A 8,670 9,537 10,404 11,271   7218 91 Semi-finished products of stainless steel, of rectangular "other than square" cross-section 8,670 N/A 8,670 9,537 10,404 11,271   7218 99 11 Semi-finished products of stainless steel, of square cross-section, rolled or obtained by continuous casting 8,670 N/A 8,670 9,537 10,404 11,271   7218 99 19 Semi-finished products of stainless steel, of square cross-section, forged 8,670 N/A 8,670 9,537 10,404 11,271   7218 99 20 Semi-finished products of stainless steel, of circular cross-section or of cross-section other than square or rectangular, rolled or obtained by continuous casting 8,670 N/A 8,670 9,537 10,404 11,271   7218 99 80 Semi-finished products of stainless steel, forged (excl. products of square or rectangular cross-section) 8,670 N/A 8,670 9,537 10,404 11,271   7219 Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7219 11 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of > 10 mm 8,690 N/A 8,690 9,559 10,428 11,297   7219 12 Flat-rolled products of stainless steel, of a width of>= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 4,7 mm and <= 10 mm 8,690 N/A 8,690 9,559 10,428 11,297   7219 13 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 3 mm and < 4,75 mm 8,690 N/A 8,690 9,559 10,428 11,297   7219 14 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of < 3 mm 8,690 N/A 8,690 9,559 10,428 11,297   7219 21 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of > 10 mm 8,690 N/A 8,690 9,559 10,428 11,297   7219 22 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 4,75 mm and <= 10 mm see below N/A see below #VALUE! #VALUE! #VALUE!   7219 23 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 3 mm and < 4,75 mm 8,670 N/A 8,670 9,537 10,404 11,271   7219 24 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of < 3 mm 8,670 N/A 8,670 9,537 10,404 11,271   7219 31 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 4,75 mm 8,690 N/A 8,690 9,559 10,428 11,297   7219 32 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 3 mm but < 4,75 mm 8,690 N/A 8,690 9,559 10,428 11,297   7219 33 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of > 1 mm but < 3 mm 8,690 N/A 8,690 9,559 10,428 11,297   7219 34 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 0,5 mm but <= 1 mm see below N/A see below #VALUE! #VALUE! #VALUE!   7219 35 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of < 0,5 mm 8,690 N/A 8,690 9,559 10,428 11,297   7219 90 Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked 8,690 N/A 8,690 9,559 10,428 11,297   7220 Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7220 11 00 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of >= 4,75 mm 8,630 N/A 8,630 9,493 10,356 11,219   7220 12 00 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of < 4,75 mm 8,690 N/A 8,690 9,559 10,428 11,297   7220 20 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" see below N/A see below #VALUE! #VALUE! #VALUE!   7220 90 Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked 8,690 N/A 8,690 9,559 10,428 11,297   7221 Bars and rods of stainless steel, hot-rolled, in irregularly wound coils see below N/A see below #VALUE! #VALUE! #VALUE!   7222 Other bars and rods of stainless steel; angles, shapes and sections of stainless steel, n.e.s. see below see below see below see below see below see below   7222 11 Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only hot-extruded, of circular cross-section 10 N/A 10 11 12 13   7222 19 Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only extruded (excl. of circular cross-section) 10 N/A 10 11 12 13   7222 20 Other bars and rods of stainless steel, not further worked than cold-formed or cold-finished 10 N/A 10 11 12 13   7222 30 Other bars and rods of stainless steel, cold-formed or cold-finished and further worked, or not further worked than forged, or forged, or hot-formed by other means and further worked, n.e.s. 10 N/A 10 11 12 13   7222 40 Angles, shapes and sections of stainless steel, n.e.s. 10 N/A 10 11 12 13   7223 Wire of stainless steel, in coils (excl. bars and rods) see below see below see below see below see below see below   7223 00 Wire of stainless steel, in coils (excl. bars and rods) 10 N/A 10 11 12 13   7224 Steel, alloy, other than stainless, in ingots or other primary forms, semi-finished products of alloy steel other than stainless (excl. waste and scrap in ingot form, and products obtained by continuous casting) see below N/A see below see below see below see below   7224 10 Steel, alloy, other than stainless, in ingots or other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) 2,280 N/A 2,280 2,508 2,736 2,964 (F) 7224 90 02 Semi-finished products of tool steel 2,150 N/A 2,150 2,365 2,580 2,795 (F) 7224 90 03 Semi-finished products of high-speed steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting the width measuring < twice the thickness 2,150 N/A 2,150 2,365 2,580 2,795 (F) 7224 90 05 Semi-finished products of steel containing by weight <= 0,7% of carbon, 0,5% to 1,2% of manganese, 0,6% to 2,3% of silicon, or of steel containing by weight >= 0,0008% of boron with any other element < the minimum content referred to in Note 1 f to chapter 72, of square or rectangular cross-section, hot rolled or obtained by continuous casting, the width measuring < twice the thickness 2,150 N/A 2,150 2,365 2,580 2,795 (F) 7224 90 07 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring < twice the thickness (excl. of tool steel, high-speed steel and articles of subheading 7224.90.05) 2,150 N/A 2,150 2,365 2,580 2,795 (F) 7224 90 14 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring >= twice the thickness (excl. of tool steel) 2,150 N/A 2,150 2,365 2,580 2,795 (F) 7224 90 18 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, forged (excl. of tool steel) 2,280 N/A 2,280 2,508 2,736 2,964 (F) 7224 90 31 Semi-finished products of steel containing by weight 0,9% to 1,15% carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting 2,150 N/A 2,150 2,365 2,580 2,795 (F) 7224 90 38 Semi-finished products of alloy steel, other than stainless steel, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting (excl. of tool steel and products containing by weight 0,9% to 1,15% of carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum) 2,150 N/A 2,150 2,365 2,580 2,795 (F) 7224 90 90 Semi-finished products of alloy steel, other than stainless steel, forged (excl. of tool steel and products of square or rectangular, circular or polygamol cross-section) 2,280 N/A 2,280 2,508 2,736 2,964 (F) 7225 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" see below N/A see below see below see below see below   7225 11 00 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, grain-oriented 2,830 N/A 2,830 3,113 3,396 3,679 (C) 7225 19 10 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, hot-rolled 2,364 N/A 2,364 2,600 2,837 3,073 (C) 7225 19 90 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, cold-rolled "cold-reduced", non-grain-oriented 2,364 N/A 2,364 2,600 2,837 3,073 (F) 7225 30 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, in coils (excl. products of silicon-electrical steel) 2,364 N/A 2,364 2,600 2,837 3,073 (F) 7225 40 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, not in coils (excl. products of silicon-electrical steel) 2,364 N/A 2,364 2,600 2,837 3,073 (F) 7225 50 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of silicon-electrical steel) 2,364 N/A 2,364 2,600 2,837 3,073 (F) 7225 91 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and electrolytically plated or coated with zinc (excl. products of silicon-electrical steel) 2,364 N/A 2,364 2,600 2,837 3,073 (F) 7225 92 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and plated or coated with zinc (excl. electrolytically plated or coated and products of silicon-electrical steel) 2,364 N/A 2,364 2,600 2,837 3,073 (F) 7225 99 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. plated or coated with zinc and products of silicon-electrical steel) 2,364 N/A 2,364 2,600 2,837 3,073 (F) 7226 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" see below N/A see below see below see below see below   7226 11 00 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", grain-oriented 2,830 N/A 2,830 3,113 3,396 3,679 (C) 7226 19 10 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, not further worked than hot-rolled 2,150 N/A 2,150 2,365 2,580 2,795 (C) 7226 19 80 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, cold-rolled "cold-reduced", whether or not further worked, or hot-rolled and further worked, non-grain-oriented 2,170 N/A 2,170 2,387 2,604 2,821 (F) 7226 20 00 Flat-rolled products of high-speed steel, of a width of <= 600 mm, hot-rolled or cold-rolled "cold-reduced" 2,150 N/A 2,150 2,365 2,580 2,795 (F) 7226 91 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than hot-rolled (excl. products of high-speed steel or silicon-electrical steel) 2,150 N/A 2,150 2,365 2,580 2,795 (F) 7226 92 00 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of high-speed steel or silicon-electrical steel) 2,170 N/A 2,170 2,387 2,604 2,821 (F) 7226 99 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. products of high-speed steel or silicon-electrical steel) 2,170 N/A 2,170 2,387 2,604 2,821 (F) 7227 Bars and rods of alloy steel other than stainless, hot-rolled, in irregularly wound coils 2,170 N/A 2,170 2,387 2,604 2,821 (C)/(F) 7228 Other bars and rods of alloy steel other than stainless, angles, shapes and sections of alloy steel other than stainless, n.e.s.; hollow drill bars and rods, of alloy or non-alloy steel see below N/A see below see below see below see below   7228 10 20 Bars and rods of high-speed steel, not further worked than hot-rolled, hot-drawn or extruded, and hot-rolled, hot-drawn or extruded, not further worked than clad (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 2,170 N/A 2,170 2,387 2,604 2,821 (F) 7228 10 50 Bars and rods of high-speed steel, forged (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 2,280 N/A 2,280 2,508 2,736 2,964 (F) 7228 10 90 Bars and rods of high-speed steel, not further worked than cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked (excl. forged products, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 2,170 N/A 2,170 2,387 2,604 2,821 (F) 7228 20 Bars and rods of silico-manganese steel (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 2,170 N/A 2,170 2,387 2,604 2,821 (F) 7228 30 Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 2,170 N/A 2,170 2,387 2,604 2,821 (C)/(F) 7228 40 Bars and rods of alloy steel other than stainless, not further worked than forged (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 2,280 N/A 2,280 2,508 2,736 2,964 (F) 7228 50 Bars and rods of alloy steel other than stainless, not further worked than cold-formed or cold-finished (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 2,170 N/A 2,170 2,387 2,604 2,821 (C)/(F) 7228 60 Bars and rods of alloy steel other than stainless, cold-formed or cold-finished and further worked or hot-formed and further worked, n.e.s. (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 2,170 N/A 2,170 2,387 2,604 2,821 (F) 7228 70 Angles, shapes and sections of alloy steel other than stainless, n.e.s. 2,170 N/A 2,170 2,387 2,604 2,821 (F) 7228 80 00 Hollow drill bars and rods, of alloy or non-alloy steel 2,170 N/A 2,170 2,387 2,604 2,821 (F) 7229 Wire of alloy steel other than stainless, in coils (excl. bars and rods) 2,170 N/A 2,170 2,387 2,604 2,821 (C)/(F) 7301 Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel 2,333 N/A 2,333 2,566 2,800 3,033 (C) 7302 Railway or tramway track construction material of iron or steel, the following : rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers "cross-ties", fish-plates, chairs, chair wedges, sole plates "base plates", rail clips, bedplates, ties and other material specialised for jointing or fixing rails 2,383 N/A 2,383 2,621 2,860 3,098 (C) 7303 Tubes, pipes and hollow profiles, of cast iron see below N/A see below see below see below see below   7303 00 Tubes, pipes and hollow profiles, of cast iron 2,473 N/A 2,473 2,720 2,968 3,215   7304 Tubes, pipes and hollow profiles, seamless, of iron or steel (excl. products of cast iron) see below N/A see below see below see below see below   7304 11 00 Line pipe of a kind used for oil or gas pipelines, seamless, of stainless steel 2,513 N/A 2,513 2,764 3,016 3,267   7304 19 Line pipe of a kind used for oil or gas pipelines, seamless, of iron or steel (excl. products of stainless steel or of cast iron) 2,313 N/A 2,313 2,544 2,776 3,007 (C) 7304 22 00 Drill pipe, seamless, of stainless steel, of a kind used in drilling for oil or gas 2,513 N/A 2,513 2,764 3,016 3,267   7304 23 00 Drill pipe, seamless, of a kind used in drilling for oil or gas, of iron or steel (excl. products of stainless steel or of cast iron) 2,313 N/A 2,313 2,544 2,776 3,007 (C) 7304 24 00 Casing and tubing, seamless, of a kind used for drilling for oil or gas, of stainless steel 2,513 N/A 2,513 2,764 3,016 3,267   7304 29 Casing and tubing, seamless, of iron or steel, of a kind used in drilling for oil or gas (excl. products of cast iron) 2,313 N/A 2,313 2,544 2,776 3,007 (C) 7304 31 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" (excl. cast iron products and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used for drilling for oil or gas) 2,313 N/A 2,313 2,544 2,776 3,007 (C) 7304 39 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, not cold-drawn or cold-rolled "cold-reduced" (excl. cast iron products, line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas) 2,313 N/A 2,313 2,544 2,776 3,007 (C) 7304 41 00 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas) 2,513 N/A 2,513 2,764 3,016 3,267   7304 49 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines or of a kind used for drilling for oil or gas) 2,513 N/A 2,513 2,764 3,016 3,267   7304 51 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil) 2,233 N/A 2,233 2,456 2,680 2,903 (F) 7304 59 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil) 2,233 N/A 2,233 2,456 2,680 2,903 (C)/(F) 7304 90 00 Tubes, pipes and hollow profiles, seamless, of non-circular cross-section, of iron or steel (excl. products of cast iron) 2,313 N/A 2,313 2,544 2,776 3,007 (C) 7305 Tubes and pipes, having circular cross-sections and an external diameter of > 406,4 mm, of flat-rolled products of iron or steel "e.g., welded, riveted or similarly closed" 2,333 N/A 2,333 2,566 2,800 3,033 (C) 7306 Tubes, pipes and hollow profiles "e.g., open seam or welded, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless tubes and pipes and tubes having internal and external circular cross-sections and an external diameter of > 406,4 mm) see below N/A see below see below see below see below   7306 11 00 Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm 2,543 N/A 2,543 2,797 3,052 3,306   7306 19 00 Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron) 2,333 N/A 2,333 2,566 2,800 3,033 (C) 7306 21 00 Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm 2,543 N/A 2,543 2,797 3,052 3,306   7306 29 00 Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron) 2,333 N/A 2,333 2,566 2,800 3,033 (C) 7306 30 12 Precision tubes, welded, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" 2,333 N/A 2,333 2,566 2,800 3,033 (C) 7306 30 18 Precision tubes, welded, of circular cross-section, of iron or non-alloy steel (excl. cold-drawn or cold-rolled) 2,313 N/A 2,313 2,544 2,776 3,007   7306 30 41 Threaded or threadable tubes "gas pipe", welded, of circular cross-section, of iron or non-alloy steel, plated or coated with zinc 2,333 N/A 2,333 2,566 2,800 3,033 (C) 7306 30 49 Threaded or threadable tubes "gas pipe", welded, of circular cross-section, of iron or non-alloy steel (excl. products plated or coated with zinc) 2,333 N/A 2,333 2,566 2,800 3,033 (C) 7306 30 72 Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel, of an external diameter of <= 168,3 mm, plated or coated with zinc (excl. line pipe of a kind used for oil or gas pipelines or casing and tubingof a kind used in drilling for oil or gas) 2,333 N/A 2,333 2,566 2,800 3,033 (C) 7306 30 77 Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel of an external diameter of <= 168,3 mm (excl. plated or coated with zinc and line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used in drilling for oil or gas, precision tubes and threaded or threadable tubes "gas pipe") 2,333 N/A 2,333 2,566 2,800 3,033 (C) 7306 30 80 Tubes, pipes and hollow profiles, welded, having a circular cross-section, of iron or steel, of an external diameter of > 168,3 mm but <= 406,4 mm (excl. line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, or precision steel tubes, electrical conduit tubes or threaded or threadable tubes "gas pipe") 2,333 N/A 2,333 2,566 2,800 3,033 (C) 7306 40 20 Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. products having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) 2,543 N/A 2,543 2,797 3,052 3,306   7306 40 80 Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel (excl. products cold-drawn or cold-rolled "cold-reduced", tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) 2,523 N/A 2,523 2,775 3,028 3,280   7306 50 21 Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" 2,273 N/A 2,273 2,500 2,728 2,955 (F) 7306 50 29 Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless (excl. cold-drawn or cold-rolled) 2,253 N/A 2,253 2,478 2,704 2,929 (F) 7306 50 80 Tubes, pipes and hollow profiles, welded, of circular cross-section, of alloy steel other than stainless (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and precision steel tubes) 2,273 N/A 2,273 2,500 2,728 2,955 (F) 7306 61 10 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel 2,543 N/A 2,543 2,797 3,052 3,306   7306 61 92 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of <= 2 mm 2,333 N/A 2,333 2,566 2,800 3,033 (C) 7306 61 99 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of > 2 mm 2,333 N/A 2,333 2,566 2,800 3,033 (C) 7306 69 10 Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) 2,543 N/A 2,543 2,797 3,052 3,306   7306 69 90 Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of iron or steel other than stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) 2,333 N/A 2,333 2,566 2,800 3,033 (C) 7306 90 00 Tubes, pipes and hollow profiles "e.g., open seam, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless or welded tubes and pipes and tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm) 2,333 N/A 2,333 2,566 2,800 3,033 (C) 7307 Tube or pipe fittings "e.g. couplings, elbows, sleeves", of iron or steel see below N/A see below see below see below see below   7307 11 Tube or pipe fittings of non-malleable cast iron 2,373 N/A 2,373 2,610 2,848 3,085   7307 19 10 Tube or pipe fittings of cast iron (excl. of non-malleable) 2,373 N/A 2,373 2,610 2,848 3,085   7307 19 90 Cast tube or pipe fittings of steel 2,453 N/A 2,453 2,698 2,944 3,189 (C) 7307 21 00 Flanges of stainless steel (excl. cast products) 2,543 N/A 2,543 2,797 3,052 3,306   7307 22 Threaded elbows, bends and sleeves of stainless steel (excl. cast products) 2,543 N/A 2,543 2,797 3,052 3,306   7307 23 Butt welding tube or pipe fittings of stainless steel (excl. cast products) 2,543 N/A 2,543 2,797 3,052 3,306   7307 29 Tube or pipe fittings of stainless steel (excl. cast products, flanges, threaded elbows, bends and sleeves and butt weldings fittings) 2,543 N/A 2,543 2,797 3,052 3,306   7307 91 00 Flanges of iron or steel (excl. cast or stainless products) 2,313 N/A 2,313 2,544 2,776 3,007 (C) 7307 92 Threaded elbows, bends and sleeves, of stainless steel (excl. cast or stainless products) 2,313 N/A 2,313 2,544 2,776 3,007 (C) 7307 93 Butt welding fittings of iron or steel (excl. cast iron or stainless steel products, and flanges) 2,313 N/A 2,313 2,544 2,776 3,007 (C) 7307 99 Tube or pipe fittings, of iron or steel (excl. cast iron or stainless steel products; flanges; threaded elbows, bends and sleeves; butt welding fittings) 2,313 N/A 2,313 2,544 2,776 3,007 (C) 7308 Structures and parts of structures "e.g., bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns", of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel (excl. prefabricated buildings of heading 9406) 2,423 N/A 2,423 2,665 2,908 3,150 (C) 7309 Reservoirs, tanks, vats and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of > 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated (excl. containers specifically constructed or equipped for one or more types of transport) 2,443 N/A 2,443 2,687 2,932 3,176 (C) 7310 Tanks, casks, drums, cans, boxes and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of <= 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated, n.e.s. 2,333 N/A 2,333 2,566 2,800 3,033 (C) 7311 Containers of iron or steel, for compressed or liquefied gas (excl. containers specifically constructed or equipped for one or more types of transport) see below N/A see below see below see below see below   7311 00 Containers of iron or steel, for compressed or liquefied gas (excl. containers specifically constructed or equipped for one or more types of transport) 2,423 N/A 2,423 2,665 2,908 3,150 (C) 7318 Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers, incl. spring washers, and similar articles, of iron or steel (excl. lag screws, stoppers, plugs and the like, threaded) see below N/A see below see below see below see below   7318 11 00 Coach screws of iron or steel 2,707 N/A 2,707 2,978 3,249 3,519 (C) 7318 12 10 Wood screws of stainless steel (excl. coach screws) 2,707 N/A 2,707 2,978 3,249 3,519 (C) 7318 12 90 Wood screws of iron or steel other than stainless (excl. coach screws) 2,707 N/A 2,707 2,978 3,249 3,519 (C) 7318 13 00 Screw hooks and screw rings, of iron or steel 2,707 N/A 2,707 2,978 3,249 3,519 (C) 7318 14 10 Self-tapping screws, of stainless steel (excl. wood screws) 2,707 N/A 2,707 2,978 3,249 3,519 (C) 7318 14 91 Spaced-thread screws of iron or steel other than stainless 2,707 N/A 2,707 2,978 3,249 3,519 (C) 7318 14 99 Self-tapping screws of iron or steel other than stainless (excl. spaced-thread screws and wood screws) 2,707 N/A 2,707 2,978 3,249 3,519 (C) 7318 15 Threaded screws and bolts, of iron or steel, whether or not with their nuts and washers (excl. coach screws and other wood screws, screw hooks and screw rings, self-tapping screws, lag screws, stoppers, plugs and the like, threaded) 2,707 N/A 2,707 2,978 3,249 3,519 (C) 7318 16 Nuts of iron or steel 2,707 N/A 2,707 2,978 3,249 3,519 (C) 7318 19 00 Threaded articles, of iron or steel, n.e.s. 2,707 N/A 2,707 2,978 3,249 3,519 (C) 7318 21 00 Spring washers and other lock washers, of iron or steel 2,707 N/A 2,707 2,978 3,249 3,519 (C) 7318 22 00 Washers of iron or steel (excl. spring washers and other lock washers) 2,707 N/A 2,707 2,978 3,249 3,519 (C) 7318 23 00 Rivets of iron or steel (excl. tubular and bifurcated rivets for particular uses) 2,707 N/A 2,707 2,978 3,249 3,519 (C) 7318 24 00 Cotters and cotter pins, of iron or steel 2,707 N/A 2,707 2,978 3,249 3,519 (C) 7318 29 00 Non-threaded articles, of iron or steel 2,707 N/A 2,707 2,978 3,249 3,519 (C) 7326 Articles of iron or steel, n.e.s. (excl. cast articles) see below N/A see below see below see below see below   7326 11 00 Grinding balls and similar articles for mills, of iron or steel, forged or stamped, but not further worked 2,453 N/A 2,453 2,698 2,944 3,189 (C) 7326 19 Articles of iron or steel, forged or stamped, but not further worked, n.e.s. (excl. grinding balls and similar articles for mills) 2,453 N/A 2,453 2,698 2,944 3,189 (C) 7326 20 00 Articles of iron or steel wire, n.e.s. 2,303 N/A 2,303 2,533 2,764 2,994 (C) 7326 90 30 Ladders and steps, of iron or steel 2,303 N/A 2,303 2,533 2,764 2,994 (C) 7326 90 40 Pallets and similar platforms for handling goods, of iron or steel 2,303 N/A 2,303 2,533 2,764 2,994 (C) 7326 90 50 Reels for cables, piping and the like, of iron or steel 2,303 N/A 2,303 2,533 2,764 2,994 (C) 7326 90 60 Ventilators, non-mechanical, guttering, hooks and like articles used in the building industry, n.e.s., of iron or steel 2,303 N/A 2,303 2,533 2,764 2,994 (C) 7326 90 92 Articles of iron or steel, open-die forged, n.e.s. 2,453 N/A 2,453 2,698 2,944 3,189 (C) 7326 90 94 Articles of iron or steel, closed-die forged, n.e.s. 2,453 N/A 2,453 2,698 2,944 3,189 (C) 7326 90 96 Sintered articles of iron or steel, n.e.s. 2,453 N/A 2,453 2,698 2,944 3,189 (C) 7326 90 98 Articles of iron or steel, n.e.s. 2,333 N/A 2,333 2,566 2,800 3,033 (C) Tajikistan Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – – – –   2523 10 00 White clinker – – – – – –   2523 10 00 Grey clinker 1,360 0 1,360 1,496 1,632 1,768 (A) 2523 21 00 White Portland cement – – – – – –   2523 29 00 Grey Portland cement 1,360 0,010 1,360 1,496 1,632 1,768   2523 90 00 White hydraulic cements – – – – – –   2523 90 00 Grey hydraulic cements 1,290 0,010 1,300 1,430 1,560 1,690 (A) 2523 30 00 Aluminous cement – – – – – –   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 2,700 0,040 2,740 2,767 2,767 2,767   2814 10 00 Anhydrous ammonia – – – – – –   2814 20 00 Ammonia in aqueous solution 0,650 0,040 0,690 0,697 0,697 0,697   2834 21 00 Nitrate of potassium 2,180 0,050 2,230 2,252 2,252 2,252   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,470 0,030 0,490 0,495 0,495 0,495   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,770 0,030 0,800 0,808 0,808 0,808   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,410 0,080 1,490 1,505 1,505 1,505   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,380 0,080 1,450 1,465 1,465 1,465   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,620 0,040 0,660 0,667 0,667 0,667   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,390 0,050 1,440 1,454 1,454 1,454   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,650 0,040 1,690 1,707 1,707 1,707   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,540 0,060 2,600 2,626 2,626 2,626   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,160 0,050 2,210 2,232 2,232 2,232   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,160 0,050 2,210 2,232 2,232 2,232   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 4,220 0,060 4,280 4,323 4,323 4,323   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,120 0,050 2,180 2,202 2,202 2,202   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,580 0,050 1,630 1,646 1,646 1,646   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,610 0,060 1,670 1,687 1,687 1,687   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,800 0,040 0,840 0,848 0,848 0,848   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,060 0,030 1,090 1,101 1,101 1,101   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,710 0,020 0,740 0,747 0,747 0,747   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,510 0,030 0,540 0,545 0,545 0,545   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,320 0,020 0,340 0,343 0,343 0,343   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,460 0,040 1,500 1,515 1,515 1,515   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,580 0,070 0,640 0,646 0,646 0,646   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,430 0,040 1,470 1,485 1,485 1,485   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,730 0,020 0,750 0,758 0,758 0,758   Aluminium         10 % mark-up 20 % mark-up 30 % mark-up   7601 Unwrought aluminium 1,700 N/A 1,700 1,870 2,040 2,210 (K) 7603 Aluminium powders and flakes 1,810 N/A 1,810 1,991 2,172 2,353 (K) 7604 10 10 Bars and rods 2,040 N/A 2,040 2,244 2,448 2,652 (K) 7604 10 90 Profiles 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7604 21 00 Hollow profiles 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7604 29 10 Bars and rods 2,040 N/A 2,040 2,244 2,448 2,652 (K) 7604 29 90 Profiles 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7605 Aluminium wire 2,040 N/A 2,040 2,244 2,448 2,652 (K) 7606 Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7608 Aluminium tubes and pipes 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7609 00 00 Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7610 10 00 Doors, windows and their frames and thresholds for doors 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7610 90 Other 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7610 90 10 Bridges and bridge-sections, towers and lattice masts 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7610 90 90 Other 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7611 00 00 Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7612 Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7613 00 00 Aluminium containers for compressed or liquefied gas 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7614 Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated 2,040 N/A 2,040 2,244 2,448 2,652 (K) 7616 10 00 Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7616 91 00 Cloth, grill, netting and fencing, of aluminium wire 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7616 99 10 Cast 1,810 N/A 1,810 1,991 2,172 2,353 (K) 7616 99 90 Other 2,490 N/A 2,490 2,739 2,988 3,237 (K) Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066   Tanzania Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – – – –   2523 10 00 White clinker – – – – – –   2523 10 00 Grey clinker 0,850 0,030 0,880 0,968 1,056 1,144 (A) 2523 21 00 White Portland cement – – – – – –   2523 29 00 Grey Portland cement 0,850 0,050 0,900 0,990 1,080 1,170   2523 90 00 White hydraulic cements – – – – – –   2523 90 00 Grey hydraulic cements 0,810 0,050 0,860 0,946 1,032 1,118 (A) 2523 30 00 Aluminous cement – – – – – –   Fertilisers         1 % mark-up       2808 00 00 Nitric acid; sulphonitric acids 1,640 0,050 1,680 1,697 1,697 1,697   2814 10 00 Anhydrous ammonia – – – – – –   2814 20 00 Ammonia in aqueous solution 0,600 0,050 0,650 0,657 0,657 0,657   2834 21 00 Nitrate of potassium 1,460 0,070 1,520 1,535 1,535 1,535   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,440 0,040 0,480 0,485 0,485 0,485   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,730 0,040 0,770 0,778 0,778 0,778   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,330 0,110 1,440 1,454 1,454 1,454   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,300 0,100 1,410 1,424 1,424 1,424   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,580 0,070 0,650 0,657 0,657 0,657   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,040 0,080 1,120 1,131 1,131 1,131   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,110 0,060 1,170 1,182 1,182 1,182   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,700 0,100 1,800 1,818 1,818 1,818   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,470 0,090 1,550 1,566 1,566 1,566   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,470 0,090 1,550 1,566 1,566 1,566   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,560 0,070 2,630 2,656 2,656 2,656   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,430 0,080 1,510 1,525 1,525 1,525   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,180 0,080 1,260 1,273 1,273 1,273   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,300 0,090 1,390 1,404 1,404 1,404   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,620 0,070 0,680 0,687 0,687 0,687   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,740 0,080 0,820 0,828 0,828 0,828   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,500 0,060 0,560 0,566 0,566 0,566   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,470 0,050 0,520 0,525 0,525 0,525   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,300 0,040 0,340 0,343 0,343 0,343   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,010 0,100 1,100 1,111 1,111 1,111   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,540 0,090 0,630 0,636 0,636 0,636   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,980 0,060 1,040 1,050 1,050 1,050   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,510 0,040 0,550 0,556 0,556 0,556   Aluminium         10 % mark-up 20 % mark-up 30 % mark-up   7601 Unwrought aluminium 0,360 N/A 0,360 0,396 0,432 0,468 (L) 7603 Aluminium powders and flakes 0,600 N/A 0,600 0,660 0,720 0,780 (L) 7604 10 10 Bars and rods 0,830 N/A 0,830 0,913 0,996 1,079 (L) 7604 10 90 Profiles 0,840 N/A 0,840 0,924 1,008 1,092 (L) 7604 21 00 Hollow profiles 0,840 N/A 0,840 0,924 1,008 1,092 (L) 7604 29 10 Bars and rods 0,830 N/A 0,830 0,913 0,996 1,079 (L) 7604 29 90 Profiles 0,840 N/A 0,840 0,924 1,008 1,092 (L) 7605 Aluminium wire 0,830 N/A 0,830 0,913 0,996 1,079 (L) 7606 Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm 1,280 N/A 1,280 1,408 1,536 1,664 (L) 7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm 1,280 N/A 1,280 1,408 1,536 1,664 (L) 7608 Aluminium tubes and pipes 0,840 N/A 0,840 0,924 1,008 1,092 (L) 7609 00 00 Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) 0,840 N/A 0,840 0,924 1,008 1,092 (L) 7610 10 00 Doors, windows and their frames and thresholds for doors 0,840 N/A 0,840 0,924 1,008 1,092 (L) 7610 90 Other 0,840 N/A 0,840 0,924 1,008 1,092 (L) 7610 90 10 Bridges and bridge-sections, towers and lattice masts 0,840 N/A 0,840 0,924 1,008 1,092 (L) 7610 90 90 Other 0,840 N/A 0,840 0,924 1,008 1,092 (L) 7611 00 00 Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 1,280 N/A 1,280 1,408 1,536 1,664 (L) 7612 Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 1,280 N/A 1,280 1,408 1,536 1,664 (L) 7613 00 00 Aluminium containers for compressed or liquefied gas 1,280 N/A 1,280 1,408 1,536 1,664 (L) 7614 Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated 0,830 N/A 0,830 0,913 0,996 1,079 (L) 7616 10 00 Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles 1,280 N/A 1,280 1,408 1,536 1,664 (L) 7616 91 00 Cloth, grill, netting and fencing, of aluminium wire 1,280 N/A 1,280 1,408 1,536 1,664 (L) 7616 99 10 Cast 0,600 N/A 0,600 0,660 0,720 0,780 (L) 7616 99 90 Other 1,280 N/A 1,280 1,408 1,536 1,664 (L) Thailand Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 2,080 0,060 2,130 2,151 2,151 2,151   2814 10 00 Anhydrous ammonia 2,060 0,180 2,240 2,262 2,262 2,262   2814 20 00 Ammonia in aqueous solution 0,620 0,050 0,670 0,677 0,677 0,677   2834 21 00 Nitrate of potassium 1,760 0,080 1,840 1,858 1,858 1,858   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,460 0,050 0,510 0,515 0,515 0,515   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,770 0,050 0,820 0,828 0,828 0,828   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,400 0,140 1,540 1,555 1,555 1,555   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,370 0,140 1,510 1,525 1,525 1,525   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,610 0,100 0,710 0,717 0,717 0,717   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,190 0,120 1,310 1,323 1,323 1,323   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,330 0,090 1,420 1,434 1,434 1,434   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,050 0,140 2,190 2,212 2,212 2,212   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,770 0,130 1,890 1,909 1,909 1,909   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,770 0,130 1,890 1,909 1,909 1,909   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 3,240 0,090 3,330 3,363 3,363 3,363   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,720 0,120 1,840 1,858 1,858 1,858   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,360 0,110 1,470 1,485 1,485 1,485   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,450 0,130 1,580 1,596 1,596 1,596   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,700 0,110 0,800 0,808 0,808 0,808   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,880 0,130 1,010 1,020 1,020 1,020   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,600 0,100 0,700 0,707 0,707 0,707   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,480 0,080 0,560 0,566 0,566 0,566   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,310 0,060 0,370 0,374 0,374 0,374   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,200 0,160 1,360 1,374 1,374 1,374   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,560 0,120 0,680 0,687 0,687 0,687   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,170 0,100 1,260 1,273 1,273 1,273   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,600 0,070 0,670 0,677 0,677 0,677   Aluminium         10 % mark-up 20 % mark-up 30 % mark-up   7601 Unwrought aluminium 0,360 N/A 0,360 0,396 0,432 0,468 (L) 7603 Aluminium powders and flakes 1,050 N/A 1,050 1,155 1,260 1,365 (L) 7604 10 10 Bars and rods 1,270 N/A 1,270 1,397 1,524 1,651 (L) 7604 10 90 Profiles 1,290 N/A 1,290 1,419 1,548 1,677 (L) 7604 21 00 Hollow profiles 1,290 N/A 1,290 1,419 1,548 1,677 (L) 7604 29 10 Bars and rods 1,270 N/A 1,270 1,397 1,524 1,651 (L) 7604 29 90 Profiles 1,290 N/A 1,290 1,419 1,548 1,677 (L) 7605 Aluminium wire 1,270 N/A 1,270 1,397 1,524 1,651 (L) 7606 Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm 1,730 N/A 1,730 1,903 2,076 2,249 (L) 7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm 1,730 N/A 1,730 1,903 2,076 2,249 (L) 7608 Aluminium tubes and pipes 1,290 N/A 1,290 1,419 1,548 1,677 (L) 7609 00 00 Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) 1,290 N/A 1,290 1,419 1,548 1,677 (L) 7610 10 00 Doors, windows and their frames and thresholds for doors 1,290 N/A 1,290 1,419 1,548 1,677 (L) 7610 90 Other 1,290 N/A 1,290 1,419 1,548 1,677 (L) 7610 90 10 Bridges and bridge-sections, towers and lattice masts 1,290 N/A 1,290 1,419 1,548 1,677 (L) 7610 90 90 Other 1,290 N/A 1,290 1,419 1,548 1,677 (L) 7611 00 00 Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 1,730 N/A 1,730 1,903 2,076 2,249 (L) 7612 Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 1,730 N/A 1,730 1,903 2,076 2,249 (L) 7613 00 00 Aluminium containers for compressed or liquefied gas 1,730 N/A 1,730 1,903 2,076 2,249 (L) 7614 Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated 1,270 N/A 1,270 1,397 1,524 1,651 (L) 7616 10 00 Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles 1,730 N/A 1,730 1,903 2,076 2,249 (L) 7616 91 00 Cloth, grill, netting and fencing, of aluminium wire 1,730 N/A 1,730 1,903 2,076 2,249 (L) 7616 99 10 Cast 1,050 N/A 1,050 1,155 1,260 1,365 (L) 7616 99 90 Other 1,730 N/A 1,730 1,903 2,076 2,249 (L) Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066   Iron and steel         10 % mark-up 20 % mark-up 30 % mark-up   2601 12 00 Agglomerated iron ores and concentrates (excl. roasted iron pyrites) 1,130 0,070 1,190 1,309 1,428 1,547   7201 Pig iron and spiegeleisen, in pigs, blocks or other primary forms – N/A – – – –   7202 11 Ferro-manganese, containing by weight > 2% of carbon 1,690 N/A 1,690 1,859 2,028 2,197   7202 19 Ferro-manganese, containing by weight <= 2% carbon – N/A – – – –   7202 41 Ferro-chromium, containing by weight > 4% of carbon 2,350 N/A 2,350 2,585 2,820 3,055   7202 49 Ferro-chromium, containing by weight <= 4% of carbon – N/A – – – –   7202 60 00 Ferro-nickel 3,480 N/A 3,480 3,828 4,176 4,524   7203 Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99,94%, in lumps, pellets or similar forms – N/A – – – –   7205 Granules and powders of pig iron, spiegeleisen, iron or steel (excl. granules and powders of ferro-alloys, turnings and filings of iron or steel, radioactive iron powders "isotopes" and certain low-calibre, substandard balls for ballbearings) 1,430 N/A 1,430 1,573 1,716 1,859 (E) 7206 Iron and non-alloy steel in ingots or other primary forms (excl. remelting scrap ingots, products obtained by continuous casting and iron of heading 7203) see below N/A see below see below see below see below   7206 10 00 Ingots, of iron and non-alloy steel (excl. remelted scrap ingots, continuous cast products, iron of heading 7203) 0,210 N/A 0,210 0,231 0,252 0,273 (E) 7206 90 00 Iron and non-alloy steel, in puddled bars or other primary forms (excl. ingots, remelted scrap ingots, continuous cast products, iron of heading 7203) 0,210 N/A 0,210 0,231 0,252 0,273 (E) 7207 Semi-finished products of iron or non-alloy steel see below N/A see below see below see below see below   7207 11 11 Semi-finished products, of non-alloy free-cutting steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting 1,920 N/A 1,920 2,111 2,303 2,495 (E) 7207 11 14 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness of <= 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel) 1,920 N/A 1,920 2,111 2,303 2,495 (E) 7207 11 16 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness of > 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel) 1,920 N/A 1,920 2,111 2,303 2,495 (E) 7207 11 90 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular cross-section, the width < twice the thickness, forged 1,440 N/A 1,440 1,584 1,728 1,872 (E) 7207 12 10 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtained by continuous casting 1,920 N/A 1,920 2,111 2,303 2,495 (E) 7207 12 90 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular "other than square" cross-section, the width >= twice the thickness, forged 1,440 N/A 1,440 1,584 1,728 1,872 (E) 7207 19 12 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting 1,920 N/A 1,920 2,111 2,303 2,495 (E) 7207 19 19 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, forged 1,440 N/A 1,440 1,584 1,728 1,872 (E) 7207 19 80 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon (excl. semi-products, of square, rectangular, circular or polygonal cross-section) 1,920 N/A 1,920 2,111 2,303 2,495 (E) 7207 20 11 Semi-finished products, of non-alloy free-cutting steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting 1,920 N/A 1,920 2,111 2,303 2,495 (E) 7207 20 15 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% but < 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel) 1,920 N/A 1,920 2,111 2,303 2,495 (E) 7207 20 17 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel) 1,920 N/A 1,920 2,111 2,303 2,495 (E) 7207 20 19 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, forged 1,440 N/A 1,440 1,584 1,728 1,872 (E) 7207 20 32 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtained by continuous casting 1,920 N/A 1,920 2,111 2,303 2,495 (E) 7207 20 39 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of rectangular "other than square" cross-section and the width >= twice the thickness, forged 1,440 N/A 1,440 1,584 1,728 1,872 (E) 7207 20 52 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting 1,920 N/A 1,920 2,111 2,303 2,495 (E) 7207 20 59 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of circular or polygonal cross-section, forged 1,440 N/A 1,440 1,584 1,728 1,872 (E) 7207 20 80 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon (excl. those of square, rectangular, circular or polygonal cross-section) 1,920 N/A 1,920 2,111 2,303 2,495 (E) 7208 Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled, not clad, plated or coated 1,920 N/A 1,920 2,111 2,303 2,495 (E) 7209 Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, cold-rolled "cold-reduced", not clad, plated or coated 2,331 N/A 2,331 2,564 2,797 3,030 (E) 7210 Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated 2,331 N/A 2,331 2,564 2,797 3,030 (E) 7211 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", not clad, plated or coated see below N/A see below see below see below see below   7211 13 00 Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as "wide flats" 1,920 N/A 1,920 2,111 2,303 2,495 (E) 7211 14 00 Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, not further worked than hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm (excl. "wide flats") 1,920 N/A 1,920 2,111 2,303 2,495 (E) 7211 19 00 Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, simply hot-rolled, not clad, plated or coated, of a thickness < 4,75 mm (excl. "wide flats") 1,920 N/A 1,920 2,111 2,303 2,495 (E) 7211 23 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight < 0,25% of carbon 2,331 N/A 2,331 2,564 2,797 3,030 (E) 7211 29 00 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight >= 0,25% of carbon 2,331 N/A 2,331 2,564 2,797 3,030 (E) 7211 90 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked, but not clad, plated or coated 2,331 N/A 2,331 2,564 2,797 3,030 (E) 7212 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated 2,331 N/A 2,331 2,564 2,797 3,030 (E) 7213 Bars and rods of iron or non-alloy steel, hot-rolled, in irregularly wound coils 1,920 N/A 1,920 2,111 2,303 2,495 (E) 7214 Bars and rods, of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but incl. those twisted after rolling (excl. in irregularly wound coils) see below N/A see below see below see below see below   7214 10 00 Bars and rods, of iron or non-alloy steel, not further worked than forged (excl. in irregularly wound coils) 1,440 N/A 1,440 1,584 1,728 1,872 (E) 7214 20 00 Bars and rods, of iron or non-alloy steel, with indentations, ribs, groves or other deformations produced during the rolling process 1,920 N/A 1,920 2,111 2,303 2,495 (E) 7214 30 00 Bars and rods, of non-alloy free-cutting steel, not further worked than hot-rolled, hot-drawn or hot-extruded (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling) 1,920 N/A 1,920 2,111 2,303 2,495 (E) 7214 91 Bars and rods, of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, of rectangular "other than square" cross-section (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process, bars and rods twisted after rolling and free-cutting steel) 1,920 N/A 1,920 2,111 2,303 2,495 (E) 7214 99 Bars and rods, of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded (excl. of rectangular [other than square] cross-section and those containing indentations, ribs, grooves or other deformations produced during the rolling process, and of non-alloy free-cutting steel) 1,920 N/A 1,920 2,111 2,303 2,495 (E) 7215 Bars and rods, of iron or non-alloy steel, cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked, n.e.s. 1,920 N/A 1,920 2,111 2,303 2,495 (E) 7216 Angles, shapes and sections of iron or non-alloy steel, n.e.s. 1,920 N/A 1,920 2,111 2,303 2,495 (E) 7217 Wire of iron or non-alloy steel, in coils (excl. bars and rods) see below N/A see below see below see below see below   7217 10 Wire of iron or non-alloy steel, in coils, not plated or coated, whether or not polished (excl. bars and rods) 1,920 N/A 1,920 2,111 2,303 2,495 (E) 7217 20 Wire of iron or non-alloy steel, in coils, plated or coated with zinc (excl. bars and rods) 1,920 N/A 1,920 2,111 2,303 2,495 (E) 7217 30 Wire of iron or non-alloy steel, in coils, plated or coated with base metals (excl. plated or coated with zinc, and bars and rods) 1,920 N/A 1,920 2,111 2,303 2,495 (E) 7217 90 Wire of iron or non-alloy steel, in coils, plated or coated (excl. plated or coated with base metals, and bars and rods) 1,920 N/A 1,920 2,111 2,303 2,495 (E) 7218 Stainless steel in ingots or other primary forms (excl. remelting scrap ingots and products obtained by continuous casting); semi-finished products of stainless steel – – – – – –   7218 10 00 Steel, stainless, in ingots and other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) – – – – – –   7218 91 Semi-finished products of stainless steel, of rectangular "other than square" cross-section – – – – – –   7218 99 11 Semi-finished products of stainless steel, of square cross-section, rolled or obtained by continuous casting – – – – – –   7218 99 19 Semi-finished products of stainless steel, of square cross-section, forged – – – – – –   7218 99 20 Semi-finished products of stainless steel, of circular cross-section or of cross-section other than square or rectangular, rolled or obtained by continuous casting – – – – – –   7218 99 80 Semi-finished products of stainless steel, forged (excl. products of square or rectangular cross-section) – – – – – –   7219 Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" – – – – – –   7219 11 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of > 10 mm – – – – – –   7219 12 Flat-rolled products of stainless steel, of a width of>= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 4,7 mm and <= 10 mm – – – – – –   7219 13 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 3 mm and < 4,75 mm – – – – – –   7219 14 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of < 3 mm – – – – – –   7219 21 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of > 10 mm – – – – – –   7219 22 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 4,75 mm and <= 10 mm – – – – – –   7219 23 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 3 mm and < 4,75 mm – – – – – –   7219 24 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of < 3 mm – – – – – –   7219 31 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 4,75 mm – – – – – –   7219 32 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 3 mm but < 4,75 mm – – – – – –   7219 33 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of > 1 mm but < 3 mm – – – – – –   7219 34 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 0,5 mm but <= 1 mm – – – – – –   7219 35 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of < 0,5 mm – – – – – –   7219 90 Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked – – – – – –   7220 Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" – – – – – –   7220 11 00 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of >= 4,75 mm – – – – – –   7220 12 00 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of < 4,75 mm – – – – – –   7220 20 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" – – – – – –   7220 90 Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked – – – – – –   7221 Bars and rods of stainless steel, hot-rolled, in irregularly wound coils – – – – – –   7222 Other bars and rods of stainless steel; angles, shapes and sections of stainless steel, n.e.s. – – – – – –   7222 11 Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only hot-extruded, of circular cross-section – – – – – –   7222 19 Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only extruded (excl. of circular cross-section) – – – – – –   7222 20 Other bars and rods of stainless steel, not further worked than cold-formed or cold-finished – – – – – –   7222 30 Other bars and rods of stainless steel, cold-formed or cold-finished and further worked, or not further worked than forged, or forged, or hot-formed by other means and further worked, n.e.s. – – – – – –   7222 40 Angles, shapes and sections of stainless steel, n.e.s. – – – – – –   7223 Wire of stainless steel, in coils (excl. bars and rods) – – – – – –   7223 00 Wire of stainless steel, in coils (excl. bars and rods) – – – – – –   7224 Steel, alloy, other than stainless, in ingots or other primary forms, semi-finished products of alloy steel other than stainless (excl. waste and scrap in ingot form, and products obtained by continuous casting) see below N/A see below see below see below see below   7224 10 Steel, alloy, other than stainless, in ingots or other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) 3,390 N/A 3,390 3,729 4,068 4,407 (H) 7224 90 02 Semi-finished products of tool steel 3,520 N/A 3,520 3,872 4,224 4,576 (H) 7224 90 03 Semi-finished products of high-speed steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting the width measuring < twice the thickness 3,520 N/A 3,520 3,872 4,224 4,576 (H) 7224 90 05 Semi-finished products of steel containing by weight <= 0,7% of carbon, 0,5% to 1,2% of manganese, 0,6% to 2,3% of silicon, or of steel containing by weight >= 0,0008% of boron with any other element < the minimum content referred to in Note 1 f to chapter 72, of square or rectangular cross-section, hot rolled or obtained by continuous casting, the width measuring < twice the thickness 3,520 N/A 3,520 3,872 4,224 4,576 (H) 7224 90 07 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring < twice the thickness (excl. of tool steel, high-speed steel and articles of subheading 7224.90.05) 3,520 N/A 3,520 3,872 4,224 4,576 (H) 7224 90 14 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring >= twice the thickness (excl. of tool steel) 3,520 N/A 3,520 3,872 4,224 4,576 (H) 7224 90 18 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, forged (excl. of tool steel) 3,390 N/A 3,390 3,729 4,068 4,407 (H) 7224 90 31 Semi-finished products of steel containing by weight 0,9% to 1,15% carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting 3,520 N/A 3,520 3,872 4,224 4,576 (H) 7224 90 38 Semi-finished products of alloy steel, other than stainless steel, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting (excl. of tool steel and products containing by weight 0,9% to 1,15% of carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum) 3,520 N/A 3,520 3,872 4,224 4,576 (H) 7224 90 90 Semi-finished products of alloy steel, other than stainless steel, forged (excl. of tool steel and products of square or rectangular, circular or polygamol cross-section) 3,390 N/A 3,390 3,729 4,068 4,407 (H) 7225 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" see below N/A see below see below see below see below   7225 11 00 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, grain-oriented 4,660 N/A 4,660 5,126 5,592 6,058 (E) 7225 19 10 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, hot-rolled 3,520 N/A 3,520 3,872 4,224 4,576 (E) 7225 19 90 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, cold-rolled "cold-reduced", non-grain-oriented 3,570 N/A 3,570 3,927 4,284 4,641 (H) 7225 30 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, in coils (excl. products of silicon-electrical steel) 3,520 N/A 3,520 3,872 4,224 4,576 (H) 7225 40 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, not in coils (excl. products of silicon-electrical steel) 3,520 N/A 3,520 3,872 4,224 4,576 (H) 7225 50 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of silicon-electrical steel) 3,570 N/A 3,570 3,927 4,284 4,641 (H) 7225 91 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and electrolytically plated or coated with zinc (excl. products of silicon-electrical steel) 3,570 N/A 3,570 3,927 4,284 4,641 (H) 7225 92 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and plated or coated with zinc (excl. electrolytically plated or coated and products of silicon-electrical steel) 3,570 N/A 3,570 3,927 4,284 4,641 (H) 7225 99 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. plated or coated with zinc and products of silicon-electrical steel) 3,570 N/A 3,570 3,927 4,284 4,641 (H) 7226 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" see below N/A see below see below see below see below   7226 11 00 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", grain-oriented 4,660 N/A 4,660 5,126 5,592 6,058 (E) 7226 19 10 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, not further worked than hot-rolled 3,520 N/A 3,520 3,872 4,224 4,576 (E) 7226 19 80 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, cold-rolled "cold-reduced", whether or not further worked, or hot-rolled and further worked, non-grain-oriented 3,570 N/A 3,570 3,927 4,284 4,641 (H) 7226 20 00 Flat-rolled products of high-speed steel, of a width of <= 600 mm, hot-rolled or cold-rolled "cold-reduced" 3,520 N/A 3,520 3,872 4,224 4,576 (H) 7226 91 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than hot-rolled (excl. products of high-speed steel or silicon-electrical steel) 3,520 N/A 3,520 3,872 4,224 4,576 (H) 7226 92 00 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of high-speed steel or silicon-electrical steel) 3,570 N/A 3,570 3,927 4,284 4,641 (H) 7226 99 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. products of high-speed steel or silicon-electrical steel) 3,570 N/A 3,570 3,927 4,284 4,641 (H) 7227 Bars and rods of alloy steel other than stainless, hot-rolled, in irregularly wound coils 3,580 N/A 3,580 3,938 4,296 4,654 (E)/(H) 7228 Other bars and rods of alloy steel other than stainless, angles, shapes and sections of alloy steel other than stainless, n.e.s.; hollow drill bars and rods, of alloy or non-alloy steel see below N/A see below see below see below see below   7228 10 20 Bars and rods of high-speed steel, not further worked than hot-rolled, hot-drawn or extruded, and hot-rolled, hot-drawn or extruded, not further worked than clad (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,580 N/A 3,580 3,938 4,296 4,654 (H) 7228 10 50 Bars and rods of high-speed steel, forged (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,390 N/A 3,390 3,729 4,068 4,407 (H) 7228 10 90 Bars and rods of high-speed steel, not further worked than cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked (excl. forged products, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,580 N/A 3,580 3,938 4,296 4,654 (H) 7228 20 Bars and rods of silico-manganese steel (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,580 N/A 3,580 3,938 4,296 4,654 (H) 7228 30 Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,580 N/A 3,580 3,938 4,296 4,654 (E)/(H) 7228 40 Bars and rods of alloy steel other than stainless, not further worked than forged (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,390 N/A 3,390 3,729 4,068 4,407 (H) 7228 50 Bars and rods of alloy steel other than stainless, not further worked than cold-formed or cold-finished (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,580 N/A 3,580 3,938 4,296 4,654 (E)/(H) 7228 60 Bars and rods of alloy steel other than stainless, cold-formed or cold-finished and further worked or hot-formed and further worked, n.e.s. (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,580 N/A 3,580 3,938 4,296 4,654 (H) 7228 70 Angles, shapes and sections of alloy steel other than stainless, n.e.s. 3,580 N/A 3,580 3,938 4,296 4,654 (H) 7228 80 00 Hollow drill bars and rods, of alloy or non-alloy steel 3,580 N/A 3,580 3,938 4,296 4,654 (H) 7229 Wire of alloy steel other than stainless, in coils (excl. bars and rods) 3,580 N/A 3,580 3,938 4,296 4,654 (E)/(H) 7301 Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel 2,040 N/A 2,040 2,243 2,447 2,651 (E) 7302 Railway or tramway track construction material of iron or steel, the following : rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers "cross-ties", fish-plates, chairs, chair wedges, sole plates "base plates", rail clips, bedplates, ties and other material specialised for jointing or fixing rails 3,950 N/A 3,950 4,344 4,739 5,134 (E) 7303 Tubes, pipes and hollow profiles, of cast iron see below N/A see below see below see below see below   7303 00 Tubes, pipes and hollow profiles, of cast iron 3,070 N/A 3,070 3,376 3,683 3,990   7304 Tubes, pipes and hollow profiles, seamless, of iron or steel (excl. products of cast iron) see below N/A see below see below see below see below   7304 11 00 Line pipe of a kind used for oil or gas pipelines, seamless, of stainless steel 4,630 N/A 4,630 5,092 5,555 6,018   7304 19 Line pipe of a kind used for oil or gas pipelines, seamless, of iron or steel (excl. products of stainless steel or of cast iron) 1,960 N/A 1,960 2,155 2,351 2,547 (E) 7304 22 00 Drill pipe, seamless, of stainless steel, of a kind used in drilling for oil or gas 4,630 N/A 4,630 5,092 5,555 6,018   7304 23 00 Drill pipe, seamless, of a kind used in drilling for oil or gas, of iron or steel (excl. products of stainless steel or of cast iron) 1,960 N/A 1,960 2,155 2,351 2,547 (E) 7304 24 00 Casing and tubing, seamless, of a kind used for drilling for oil or gas, of stainless steel 4,630 N/A 4,630 5,092 5,555 6,018   7304 29 Casing and tubing, seamless, of iron or steel, of a kind used in drilling for oil or gas (excl. products of cast iron) 1,960 N/A 1,960 2,155 2,351 2,547 (E) 7304 31 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" (excl. cast iron products and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used for drilling for oil or gas) 1,960 N/A 1,960 2,155 2,351 2,547 (E) 7304 39 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, not cold-drawn or cold-rolled "cold-reduced" (excl. cast iron products, line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas) 1,960 N/A 1,960 2,155 2,351 2,547 (E) 7304 41 00 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas) 4,630 N/A 4,630 5,092 5,555 6,018   7304 49 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines or of a kind used for drilling for oil or gas) 4,630 N/A 4,630 5,092 5,555 6,018   7304 51 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil) 1,950 N/A 1,950 2,144 2,339 2,534 (H) 7304 59 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil) 1,950 N/A 1,950 2,144 2,339 2,534 (E)/(H) 7304 90 00 Tubes, pipes and hollow profiles, seamless, of non-circular cross-section, of iron or steel (excl. products of cast iron) 1,960 N/A 1,960 2,155 2,351 2,547 (E) 7305 Tubes and pipes, having circular cross-sections and an external diameter of > 406,4 mm, of flat-rolled products of iron or steel "e.g., welded, riveted or similarly closed" 2,080 N/A 2,080 2,287 2,495 2,703 (E) 7306 Tubes, pipes and hollow profiles "e.g., open seam or welded, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless tubes and pipes and tubes having internal and external circular cross-sections and an external diameter of > 406,4 mm) see below N/A see below see below see below see below   7306 11 00 Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm 4,810 N/A 4,810 5,290 5,771 6,252   7306 19 00 Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron) 2,080 N/A 2,080 2,287 2,495 2,703 (E) 7306 21 00 Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm 4,810 N/A 4,810 5,290 5,771 6,252   7306 29 00 Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron) 2,080 N/A 2,080 2,287 2,495 2,703 (E) 7306 30 12 Precision tubes, welded, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" 2,080 N/A 2,080 2,287 2,495 2,703 (E) 7306 30 18 Precision tubes, welded, of circular cross-section, of iron or non-alloy steel (excl. cold-drawn or cold-rolled) 2,030 N/A 2,030 2,232 2,435 2,638   7306 30 41 Threaded or threadable tubes "gas pipe", welded, of circular cross-section, of iron or non-alloy steel, plated or coated with zinc 2,080 N/A 2,080 2,287 2,495 2,703 (E) 7306 30 49 Threaded or threadable tubes "gas pipe", welded, of circular cross-section, of iron or non-alloy steel (excl. products plated or coated with zinc) 2,080 N/A 2,080 2,287 2,495 2,703 (E) 7306 30 72 Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel, of an external diameter of <= 168,3 mm, plated or coated with zinc (excl. line pipe of a kind used for oil or gas pipelines or casing and tubingof a kind used in drilling for oil or gas) 2,080 N/A 2,080 2,287 2,495 2,703 (E) 7306 30 77 Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel of an external diameter of <= 168,3 mm (excl. plated or coated with zinc and line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used in drilling for oil or gas, precision tubes and threaded or threadable tubes "gas pipe") 2,080 N/A 2,080 2,287 2,495 2,703 (E) 7306 30 80 Tubes, pipes and hollow profiles, welded, having a circular cross-section, of iron or steel, of an external diameter of > 168,3 mm but <= 406,4 mm (excl. line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, or precision steel tubes, electrical conduit tubes or threaded or threadable tubes "gas pipe") 2,080 N/A 2,080 2,287 2,495 2,703 (E) 7306 40 20 Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. products having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) 4,810 N/A 4,810 5,290 5,771 6,252   7306 40 80 Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel (excl. products cold-drawn or cold-rolled "cold-reduced", tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) 4,750 N/A 4,750 5,224 5,699 6,174   7306 50 21 Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" 2,130 N/A 2,130 2,342 2,555 2,768 (H) 7306 50 29 Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless (excl. cold-drawn or cold-rolled) 2,080 N/A 2,080 2,287 2,495 2,703 (H) 7306 50 80 Tubes, pipes and hollow profiles, welded, of circular cross-section, of alloy steel other than stainless (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and precision steel tubes) 2,130 N/A 2,130 2,342 2,555 2,768 (H) 7306 61 10 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel 4,810 N/A 4,810 5,290 5,771 6,252   7306 61 92 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of <= 2 mm 2,080 N/A 2,080 2,287 2,495 2,703 (E) 7306 61 99 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of > 2 mm 2,080 N/A 2,080 2,287 2,495 2,703 (E) 7306 69 10 Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) 4,810 N/A 4,810 5,290 5,771 6,252   7306 69 90 Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of iron or steel other than stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) 2,080 N/A 2,080 2,287 2,495 2,703 (E) 7306 90 00 Tubes, pipes and hollow profiles "e.g., open seam, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless or welded tubes and pipes and tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm) 2,080 N/A 2,080 2,287 2,495 2,703 (E) 7307 Tube or pipe fittings "e.g. couplings, elbows, sleeves", of iron or steel see below N/A see below see below see below see below   7307 11 Tube or pipe fittings of non-malleable cast iron 3,070 N/A 3,070 3,376 3,683 3,990   7307 19 10 Tube or pipe fittings of cast iron (excl. of non-malleable) 3,070 N/A 3,070 3,376 3,683 3,990   7307 19 90 Cast tube or pipe fittings of steel 1,850 N/A 1,850 2,034 2,219 2,404 (E) 7307 21 00 Flanges of stainless steel (excl. cast products) 4,110 N/A 4,110 4,520 4,931 5,342   7307 22 Threaded elbows, bends and sleeves of stainless steel (excl. cast products) 4,110 N/A 4,110 4,520 4,931 5,342   7307 23 Butt welding tube or pipe fittings of stainless steel (excl. cast products) 4,110 N/A 4,110 4,520 4,931 5,342   7307 29 Tube or pipe fittings of stainless steel (excl. cast products, flanges, threaded elbows, bends and sleeves and butt weldings fittings) 4,110 N/A 4,110 4,520 4,931 5,342   7307 91 00 Flanges of iron or steel (excl. cast or stainless products) 1,850 N/A 1,850 2,034 2,219 2,404 (E) 7307 92 Threaded elbows, bends and sleeves, of stainless steel (excl. cast or stainless products) 1,850 N/A 1,850 2,034 2,219 2,404 (E) 7307 93 Butt welding fittings of iron or steel (excl. cast iron or stainless steel products, and flanges) 1,850 N/A 1,850 2,034 2,219 2,404 (E) 7307 99 Tube or pipe fittings, of iron or steel (excl. cast iron or stainless steel products; flanges; threaded elbows, bends and sleeves; butt welding fittings) 1,850 N/A 1,850 2,034 2,219 2,404 (E) 7308 Structures and parts of structures "e.g., bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns", of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel (excl. prefabricated buildings of heading 9406) 4,290 N/A 4,290 4,718 5,147 5,576 (E) 7309 Reservoirs, tanks, vats and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of > 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated (excl. containers specifically constructed or equipped for one or more types of transport) 4,640 N/A 4,640 5,103 5,567 6,031 (E) 7310 Tanks, casks, drums, cans, boxes and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of <= 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated, n.e.s. 2,090 N/A 2,090 2,298 2,507 2,716 (E) 7311 Containers of iron or steel, for compressed or liquefied gas (excl. containers specifically constructed or equipped for one or more types of transport) see below N/A see below see below see below see below   7311 00 Containers of iron or steel, for compressed or liquefied gas (excl. containers specifically constructed or equipped for one or more types of transport) 4,570 N/A 4,570 5,026 5,483 5,940 (E) 7318 Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers, incl. spring washers, and similar articles, of iron or steel (excl. lag screws, stoppers, plugs and the like, threaded) see below N/A see below see below see below see below   7318 11 00 Coach screws of iron or steel 2,408 N/A 2,408 2,649 2,890 3,130 (E) 7318 12 10 Wood screws of stainless steel (excl. coach screws) 4,690 N/A 4,690 5,158 5,627 6,096 (E) 7318 12 90 Wood screws of iron or steel other than stainless (excl. coach screws) 2,408 N/A 2,408 2,649 2,890 3,130 (E) 7318 13 00 Screw hooks and screw rings, of iron or steel 2,408 N/A 2,408 2,649 2,890 3,130 (E) 7318 14 10 Self-tapping screws, of stainless steel (excl. wood screws) 4,690 N/A 4,690 5,158 5,627 6,096 (E) 7318 14 91 Spaced-thread screws of iron or steel other than stainless 2,408 N/A 2,408 2,649 2,890 3,130 (E) 7318 14 99 Self-tapping screws of iron or steel other than stainless (excl. spaced-thread screws and wood screws) 2,408 N/A 2,408 2,649 2,890 3,130 (E) 7318 15 Threaded screws and bolts, of iron or steel, whether or not with their nuts and washers (excl. coach screws and other wood screws, screw hooks and screw rings, self-tapping screws, lag screws, stoppers, plugs and the like, threaded) 2,408 N/A 2,408 2,649 2,890 3,130 (E) 7318 16 Nuts of iron or steel 4,450 N/A 4,450 4,894 5,339 5,784 (E) 7318 19 00 Threaded articles, of iron or steel, n.e.s. 2,408 N/A 2,408 2,649 2,890 3,130 (E) 7318 21 00 Spring washers and other lock washers, of iron or steel 2,408 N/A 2,408 2,649 2,890 3,130 (E) 7318 22 00 Washers of iron or steel (excl. spring washers and other lock washers) 2,408 N/A 2,408 2,649 2,890 3,130 (E) 7318 23 00 Rivets of iron or steel (excl. tubular and bifurcated rivets for particular uses) 2,408 N/A 2,408 2,649 2,890 3,130 (E) 7318 24 00 Cotters and cotter pins, of iron or steel 2,408 N/A 2,408 2,649 2,890 3,130 (E) 7318 29 00 Non-threaded articles, of iron or steel 2,408 N/A 2,408 2,649 2,890 3,130 (E) 7326 Articles of iron or steel, n.e.s. (excl. cast articles) see below N/A see below see below see below see below   7326 11 00 Grinding balls and similar articles for mills, of iron or steel, forged or stamped, but not further worked 1,850 N/A 1,850 2,034 2,219 2,404 (E) 7326 19 Articles of iron or steel, forged or stamped, but not further worked, n.e.s. (excl. grinding balls and similar articles for mills) 1,850 N/A 1,850 2,034 2,219 2,404 (E) 7326 20 00 Articles of iron or steel wire, n.e.s. 1,920 N/A 1,920 2,111 2,303 2,495 (E) 7326 90 30 Ladders and steps, of iron or steel 1,920 N/A 1,920 2,111 2,303 2,495 (E) 7326 90 40 Pallets and similar platforms for handling goods, of iron or steel 1,920 N/A 1,920 2,111 2,303 2,495 (E) 7326 90 50 Reels for cables, piping and the like, of iron or steel 1,920 N/A 1,920 2,111 2,303 2,495 (E) 7326 90 60 Ventilators, non-mechanical, guttering, hooks and like articles used in the building industry, n.e.s., of iron or steel 1,920 N/A 1,920 2,111 2,303 2,495 (E) 7326 90 92 Articles of iron or steel, open-die forged, n.e.s. 1,850 N/A 1,850 2,034 2,219 2,404 (E) 7326 90 94 Articles of iron or steel, closed-die forged, n.e.s. 1,850 N/A 1,850 2,034 2,219 2,404 (E) 7326 90 96 Sintered articles of iron or steel, n.e.s. 1,850 N/A 1,850 2,034 2,219 2,404 (E) 7326 90 98 Articles of iron or steel, n.e.s. 1,980 N/A 1,980 2,177 2,375 2,573 (E) Togo Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – – – –   2523 10 00 White clinker – – – – – –   2523 10 00 Grey clinker 0,850 0,030 0,880 0,968 1,056 1,144 (A) 2523 21 00 White Portland cement – – – – – –   2523 29 00 Grey Portland cement 0,950 0,060 1 1,100 1,200 1,300   2523 90 00 White hydraulic cements – – – – – –   2523 90 00 Grey hydraulic cements 0,900 0,060 0,960 1,056 1,152 1,248 (A) 2523 30 00 Aluminous cement – – – – – –   Trinidad and Tobago Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – – – –   2523 10 00 White clinker – – – – – –   2523 10 00 Grey clinker 0,870 0,040 0,910 1,001 1,092 1,183 (A) 2523 21 00 White Portland cement – – – – – –   2523 29 00 Grey Portland cement 0,870 0,070 0,950 1,045 1,140 1,235   2523 90 00 White hydraulic cements – – – – – –   2523 90 00 Grey hydraulic cements 0,840 0,080 0,910 1,001 1,092 1,183 (A) 2523 30 00 Aluminous cement – – – – – –   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 1,870 0,050 1,920 1,939 1,939 1,939   2814 10 00 Anhydrous ammonia 2,260 0,150 2,420 2,444 2,444 2,444   2814 20 00 Ammonia in aqueous solution 0,680 0,050 0,730 0,737 0,737 0,737   2834 21 00 Nitrate of potassium 1,640 0,070 1,710 1,727 1,727 1,727   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,500 0,040 0,530 0,535 0,535 0,535   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,820 0,040 0,860 0,869 0,869 0,869   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,490 0,120 1,610 1,626 1,626 1,626   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,460 0,110 1,570 1,586 1,586 1,586   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,620 0,080 0,710 0,717 0,717 0,717   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,140 0,100 1,240 1,252 1,252 1,252   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,240 0,070 1,310 1,323 1,323 1,323   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,910 0,110 2,020 2,040 2,040 2,040   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,610 0,100 1,720 1,737 1,737 1,737   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,610 0,100 1,720 1,737 1,737 1,737   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,920 0,080 3 3,030 3,030 3,030   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,600 0,100 1,700 1,717 1,717 1,717   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,330 0,090 1,420 1,434 1,434 1,434   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,440 0,110 1,550 1,566 1,566 1,566   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,670 0,090 0,760 0,768 0,768 0,768   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,810 0,100 0,910 0,919 0,919 0,919   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,550 0,080 0,630 0,636 0,636 0,636   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,520 0,060 0,580 0,586 0,586 0,586   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,330 0,050 0,380 0,384 0,384 0,384   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,100 0,130 1,230 1,242 1,242 1,242   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,580 0,100 0,670 0,677 0,677 0,677   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,090 0,080 1,170 1,182 1,182 1,182   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,560 0,050 0,610 0,616 0,616 0,616   Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066   Tunisia Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – – – –   2523 10 00 White clinker 1,290 0,050 1,330 1,463 1,596 1,729 (B) 2523 10 00 Grey clinker 0,850 0,030 0,880 0,968 1,056 1,144 (A) 2523 21 00 White Portland cement 1,260 0,140 1,390 1,529 1,668 1,807   2523 29 00 Grey Portland cement 0,860 0,060 0,910 1,001 1,092 1,183   2523 90 00 White hydraulic cements 1,300 0,160 1,460 1,606 1,752 1,898 (B) 2523 90 00 Grey hydraulic cements 0,820 0,060 0,880 0,968 1,056 1,144 (A) 2523 30 00 Aluminous cement – – – – – –   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 2,570 0,030 2,600 2,626 2,626 2,626   2814 10 00 Anhydrous ammonia 2 0,100 2,100 2,121 2,121 2,121   2814 20 00 Ammonia in aqueous solution 0,600 0,030 0,630 0,636 0,636 0,636   2834 21 00 Nitrate of potassium 2,070 0,050 2,120 2,141 2,141 2,141   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,460 0,030 0,480 0,485 0,485 0,485   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,760 0,030 0,780 0,788 0,788 0,788   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,380 0,080 1,460 1,475 1,475 1,475   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,340 0,080 1,430 1,444 1,444 1,444   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,590 0,060 0,660 0,667 0,667 0,667   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,330 0,070 1,400 1,414 1,414 1,414   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,570 0,050 1,620 1,636 1,636 1,636   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,410 0,080 2,490 2,515 2,515 2,515   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,070 0,080 2,150 2,172 2,172 2,172   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,070 0,080 2,150 2,172 2,172 2,172   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 4,010 0,050 4,060 4,101 4,101 4,101   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,020 0,070 2,090 2,111 2,111 2,111   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,510 0,060 1,580 1,596 1,596 1,596   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,550 0,080 1,630 1,646 1,646 1,646   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,760 0,060 0,830 0,838 0,838 0,838   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,010 0,080 1,090 1,101 1,101 1,101   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,690 0,060 0,750 0,758 0,758 0,758   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,470 0,050 0,520 0,525 0,525 0,525   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,300 0,040 0,340 0,343 0,343 0,343   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,400 0,100 1,490 1,505 1,505 1,505   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,550 0,090 0,640 0,646 0,646 0,646   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,360 0,060 1,420 1,434 1,434 1,434   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,700 0,040 0,740 0,747 0,747 0,747   Aluminium                 7601 Unwrought aluminium 0,360 N/A 0,360 0,396 0,432 0,468 (L) 7603 Aluminium powders and flakes 0,760 N/A 0,760 0,836 0,912 0,988 (L) 7604 10 10 Bars and rods 0,980 N/A 0,980 1,078 1,176 1,274 (L) 7604 10 90 Profiles 1 N/A 1 1,100 1,200 1,300 (L) 7604 21 00 Hollow profiles 1 N/A 1 1,100 1,200 1,300 (L) 7604 29 10 Bars and rods 0,980 N/A 0,980 1,078 1,176 1,274 (L) 7604 29 90 Profiles 1 N/A 1 1,100 1,200 1,300 (L) 7605 Aluminium wire 0,980 N/A 0,980 1,078 1,176 1,274 (L) 7606 Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm 1,440 N/A 1,440 1,584 1,728 1,872 (L) 7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm 1,440 N/A 1,440 1,584 1,728 1,872 (L) 7608 Aluminium tubes and pipes 1 N/A 1 1,100 1,200 1,300 (L) 7609 00 00 Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) 1 N/A 1 1,100 1,200 1,300 (L) 7610 10 00 Doors, windows and their frames and thresholds for doors 1 N/A 1 1,100 1,200 1,300 (L) 7610 90 Other 1 N/A 1 1,100 1,200 1,300 (L) 7610 90 10 Bridges and bridge-sections, towers and lattice masts 1 N/A 1 1,100 1,200 1,300 (L) 7610 90 90 Other 1 N/A 1 1,100 1,200 1,300 (L) 7611 00 00 Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 1,440 N/A 1,440 1,584 1,728 1,872 (L) 7612 Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 1,440 N/A 1,440 1,584 1,728 1,872 (L) 7613 00 00 Aluminium containers for compressed or liquefied gas 1,440 N/A 1,440 1,584 1,728 1,872 (L) 7614 Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated 0,980 N/A 0,980 1,078 1,176 1,274 (L) 7615 10 10 Cast 1,440 N/A 1,440 1,584 1,728 1,872 (L) 7615 10 30 Manufactured from foil of a thickness not exceeding 0,2 mm 1,440 N/A 1,440 1,584 1,728 1,872 (L) 7615 10 80 Other 0,760 N/A 0,760 0,836 0,912 0,988 (L) 7615 20 00 Sanitary ware and parts thereof 1,440 N/A 1,440 1,584 1,728 1,872 (L) Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066   Türkiye Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – – – –   2523 10 00 White clinker – – – – – –   2523 10 00 Grey clinker – – – – – –   2523 21 00 White Portland cement – – – – – –   2523 29 00 Grey Portland cement – – – – – –   2523 90 00 White hydraulic cements – – – – – –   2523 90 00 Grey hydraulic cements – – – – – –   2523 30 00 Aluminous cement 1,820 0,140 1,950 2,145 2,340 2,535   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 2,680 0,030 2,720 2,747 2,747 2,747   2814 10 00 Anhydrous ammonia 2,170 0,100 2,270 2,293 2,293 2,293   2814 20 00 Ammonia in aqueous solution 0,650 0,030 0,680 0,687 0,687 0,687   2834 21 00 Nitrate of potassium 2,170 0,050 2,220 2,242 2,242 2,242   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,480 0,020 0,500 0,505 0,505 0,505   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,790 0,020 0,820 0,828 0,828 0,828   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,440 0,080 1,510 1,525 1,525 1,525   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,400 0,080 1,480 1,495 1,495 1,495   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,630 0,060 0,680 0,687 0,687 0,687   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,400 0,060 1,460 1,475 1,475 1,475   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,640 0,050 1,690 1,707 1,707 1,707   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,530 0,070 2,600 2,626 2,626 2,626   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,160 0,070 2,230 2,252 2,252 2,252   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,160 0,070 2,230 2,252 2,252 2,252   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 4,190 0,050 4,240 4,282 4,282 4,282   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,120 0,060 2,180 2,202 2,202 2,202   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,580 0,060 1,640 1,656 1,656 1,656   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,620 0,070 1,690 1,707 1,707 1,707   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,800 0,060 0,860 0,869 0,869 0,869   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,060 0,060 1,120 1,131 1,131 1,131   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,720 0,050 0,770 0,778 0,778 0,778   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,510 0,040 0,550 0,556 0,556 0,556   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,320 0,030 0,360 0,364 0,364 0,364   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,460 0,080 1,540 1,555 1,555 1,555   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,580 0,080 0,660 0,667 0,667 0,667   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,430 0,050 1,480 1,495 1,495 1,495   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,730 0,040 0,760 0,768 0,768 0,768   Aluminium         10 % mark-up 20 % mark-up 30 % mark-up   7601 Unwrought aluminium 1,700 N/A 1,700 1,870 2,040 2,210 (K) 7603 Aluminium powders and flakes 3,369 N/A 3,369 3,706 4,043 4,380 (K) 7604 10 10 Bars and rods 3,741 N/A 3,741 4,116 4,490 4,864 (K) 7604 10 90 Profiles 3,741 N/A 3,741 4,116 4,490 4,864 (K) 7604 21 00 Hollow profiles 3,741 N/A 3,741 4,116 4,490 4,864 (K) 7604 29 10 Bars and rods 3,741 N/A 3,741 4,116 4,490 4,864 (K) 7604 29 90 Profiles 3,741 N/A 3,741 4,116 4,490 4,864 (K) 7605 Aluminium wire 3,424 N/A 3,424 3,766 4,109 4,451 (K) 7606 Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm 2,714 N/A 2,714 2,985 3,257 3,528 (K) 7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm 3,071 N/A 3,071 3,378 3,685 3,992 (K) 7608 Aluminium tubes and pipes 2,754 N/A 2,754 3,029 3,304 3,580 (K) 7609 00 00 Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) 3,775 N/A 3,775 4,153 4,530 4,908 (K) 7610 10 00 Doors, windows and their frames and thresholds for doors 2,674 N/A 2,674 2,941 3,209 3,476 (K) 7610 90 Other 2,674 N/A 2,674 2,941 3,209 3,476 (K) 7610 90 10 Bridges and bridge-sections, towers and lattice masts 2,674 N/A 2,674 2,941 3,209 3,476 (K) 7610 90 90 Other 2,674 N/A 2,674 2,941 3,209 3,476 (K) 7611 00 00 Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 4,520 N/A 4,520 4,972 5,424 5,876 (K) 7612 Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 4,520 N/A 4,520 4,972 5,424 5,876 (K) 7613 00 00 Aluminium containers for compressed or liquefied gas 4,520 N/A 4,520 4,972 5,424 5,876 (K) 7614 Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated 3,741 N/A 3,741 4,116 4,490 4,864 (K) 7616 10 00 Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles 3,060 N/A 3,060 3,366 3,672 3,978 (K) 7616 91 00 Cloth, grill, netting and fencing, of aluminium wire 3,060 N/A 3,060 3,366 3,672 3,978 (K) 7616 99 10 Cast 3,060 N/A 3,060 3,366 3,672 3,978 (K) 7616 99 90 Other 3,060 N/A 3,060 3,366 3,672 3,978 (K) Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066   Iron and steel         10 % mark-up 20 % mark-up 30 % mark-up   2601 12 00 Agglomerated iron ores and concentrates (excl. roasted iron pyrites) 0,180 0,030 0,210 0,231 0,252 0,273   7201 Pig iron and spiegeleisen, in pigs, blocks or other primary forms 1,850 N/A 1,850 2,035 2,220 2,405   7202 11 Ferro-manganese, containing by weight > 2% of carbon 1,690 N/A 1,690 1,859 2,028 2,197   7202 19 Ferro-manganese, containing by weight <= 2% carbon – N/A – – – –   7202 41 Ferro-chromium, containing by weight > 4% of carbon 2,350 N/A 2,350 2,585 2,820 3,055   7202 49 Ferro-chromium, containing by weight <= 4% of carbon – N/A – – – –   7202 60 00 Ferro-nickel 3,480 N/A 3,480 3,828 4,176 4,524   7203 Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99,94%, in lumps, pellets or similar forms – N/A – – – –   7205 Granules and powders of pig iron, spiegeleisen, iron or steel (excl. granules and powders of ferro-alloys, turnings and filings of iron or steel, radioactive iron powders "isotopes" and certain low-calibre, substandard balls for ballbearings) 1,890 N/A 1,890 2,079 2,268 2,457 (C) 7206 Iron and non-alloy steel in ingots or other primary forms (excl. remelting scrap ingots, products obtained by continuous casting and iron of heading 7203) see below N/A see below see below see below see below   7206 10 00 Ingots, of iron and non-alloy steel (excl. remelted scrap ingots, continuous cast products, iron of heading 7203) 1,960 N/A 1,960 2,156 2,352 2,548 (C) 7206 90 00 Iron and non-alloy steel, in puddled bars or other primary forms (excl. ingots, remelted scrap ingots, continuous cast products, iron of heading 7203) 1,960 N/A 1,960 2,156 2,352 2,548 (C) 7207 Semi-finished products of iron or non-alloy steel see below N/A see below see below see below see below   7207 11 11 Semi-finished products, of non-alloy free-cutting steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7207 11 14 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness of <= 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel) 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7207 11 16 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness of > 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel) 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7207 11 90 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular cross-section, the width < twice the thickness, forged 3,087 N/A 3,087 3,396 3,705 4,014 (C) 7207 12 10 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtained by continuous casting 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7207 12 90 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular "other than square" cross-section, the width >= twice the thickness, forged 3,087 N/A 3,087 3,396 3,705 4,014 (C) 7207 19 12 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7207 19 19 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, forged 3,087 N/A 3,087 3,396 3,705 4,014 (C) 7207 19 80 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon (excl. semi-products, of square, rectangular, circular or polygonal cross-section) 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7207 20 11 Semi-finished products, of non-alloy free-cutting steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7207 20 15 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% but < 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel) 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7207 20 17 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel) 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7207 20 19 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, forged 3,087 N/A 3,087 3,396 3,705 4,014 (C) 7207 20 32 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtained by continuous casting 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7207 20 39 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of rectangular "other than square" cross-section and the width >= twice the thickness, forged 3,087 N/A 3,087 3,396 3,705 4,014 (C) 7207 20 52 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7207 20 59 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of circular or polygonal cross-section, forged 3,087 N/A 3,087 3,396 3,705 4,014 (C) 7207 20 80 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon (excl. those of square, rectangular, circular or polygonal cross-section) 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7208 Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled, not clad, plated or coated 2,428 N/A 2,428 2,670 2,913 3,156 (C) 7209 Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, cold-rolled "cold-reduced", not clad, plated or coated 2,510 N/A 2,510 2,761 3,012 3,263 (C) 7210 Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated 2,510 N/A 2,510 2,761 3,012 3,263 (C) 7211 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", not clad, plated or coated see below N/A see below see below see below see below   7211 13 00 Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as "wide flats" 2,428 N/A 2,428 2,670 2,913 3,156 (C) 7211 14 00 Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, not further worked than hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm (excl. "wide flats") 2,428 N/A 2,428 2,670 2,913 3,156 (C) 7211 19 00 Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, simply hot-rolled, not clad, plated or coated, of a thickness < 4,75 mm (excl. "wide flats") 2,428 N/A 2,428 2,670 2,913 3,156 (C) 7211 23 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight < 0,25% of carbon 2,510 N/A 2,510 2,761 3,012 3,263 (C) 7211 29 00 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight >= 0,25% of carbon 2,510 N/A 2,510 2,761 3,012 3,263 (C) 7211 90 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked, but not clad, plated or coated 2,510 N/A 2,510 2,761 3,012 3,263 (C) 7212 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated 2,510 N/A 2,510 2,761 3,012 3,263 (C) 7213 Bars and rods of iron or non-alloy steel, hot-rolled, in irregularly wound coils 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7214 Bars and rods, of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but incl. those twisted after rolling (excl. in irregularly wound coils) see below N/A see below see below see below see below   7214 10 00 Bars and rods, of iron or non-alloy steel, not further worked than forged (excl. in irregularly wound coils) 3,087 N/A 3,087 3,396 3,705 4,014 (C) 7214 20 00 Bars and rods, of iron or non-alloy steel, with indentations, ribs, groves or other deformations produced during the rolling process 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7214 30 00 Bars and rods, of non-alloy free-cutting steel, not further worked than hot-rolled, hot-drawn or hot-extruded (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling) 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7214 91 Bars and rods, of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, of rectangular "other than square" cross-section (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process, bars and rods twisted after rolling and free-cutting steel) 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7214 99 Bars and rods, of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded (excl. of rectangular [other than square] cross-section and those containing indentations, ribs, grooves or other deformations produced during the rolling process, and of non-alloy free-cutting steel) 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7215 Bars and rods, of iron or non-alloy steel, cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked, n.e.s. 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7216 Angles, shapes and sections of iron or non-alloy steel, n.e.s. 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7217 Wire of iron or non-alloy steel, in coils (excl. bars and rods) see below N/A see below see below see below see below   7217 10 Wire of iron or non-alloy steel, in coils, not plated or coated, whether or not polished (excl. bars and rods) 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7217 20 Wire of iron or non-alloy steel, in coils, plated or coated with zinc (excl. bars and rods) 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7217 30 Wire of iron or non-alloy steel, in coils, plated or coated with base metals (excl. plated or coated with zinc, and bars and rods) 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7217 90 Wire of iron or non-alloy steel, in coils, plated or coated (excl. plated or coated with base metals, and bars and rods) 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7218 Stainless steel in ingots or other primary forms (excl. remelting scrap ingots and products obtained by continuous casting); semi-finished products of stainless steel see below N/A see below see below see below see below   7218 10 00 Steel, stainless, in ingots and other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) 5,970 N/A 5,970 6,567 7,164 7,761   7218 91 Semi-finished products of stainless steel, of rectangular "other than square" cross-section 5,470 N/A 5,470 6,017 6,564 7,111   7218 99 11 Semi-finished products of stainless steel, of square cross-section, rolled or obtained by continuous casting 5,470 N/A 5,470 6,017 6,564 7,111   7218 99 19 Semi-finished products of stainless steel, of square cross-section, forged 5,970 N/A 5,970 6,567 7,164 7,761   7218 99 20 Semi-finished products of stainless steel, of circular cross-section or of cross-section other than square or rectangular, rolled or obtained by continuous casting 5,470 N/A 5,470 6,017 6,564 7,111   7218 99 80 Semi-finished products of stainless steel, forged (excl. products of square or rectangular cross-section) 5,970 N/A 5,970 6,567 7,164 7,761   7219 Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" see below N/A see below see below see below see below   7219 11 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of > 10 mm 5,470 N/A 5,470 6,017 6,564 7,111   7219 12 Flat-rolled products of stainless steel, of a width of>= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 4,7 mm and <= 10 mm 5,470 N/A 5,470 6,017 6,564 7,111   7219 13 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 3 mm and < 4,75 mm 5,470 N/A 5,470 6,017 6,564 7,111   7219 14 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of < 3 mm 5,470 N/A 5,470 6,017 6,564 7,111   7219 21 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of > 10 mm 5,470 N/A 5,470 6,017 6,564 7,111   7219 22 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 4,75 mm and <= 10 mm 5,470 N/A 5,470 6,017 6,564 7,111   7219 23 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 3 mm and < 4,75 mm 5,470 N/A 5,470 6,017 6,564 7,111   7219 24 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of < 3 mm 5,470 N/A 5,470 6,017 6,564 7,111   7219 31 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 4,75 mm 5,540 N/A 5,540 6,094 6,648 7,202   7219 32 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 3 mm but < 4,75 mm 5,540 N/A 5,540 6,094 6,648 7,202   7219 33 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of > 1 mm but < 3 mm 5,540 N/A 5,540 6,094 6,648 7,202   7219 34 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 0,5 mm but <= 1 mm 5,540 N/A 5,540 6,094 6,648 7,202   7219 35 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of < 0,5 mm 5,540 N/A 5,540 6,094 6,648 7,202   7219 90 Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked 5,540 N/A 5,540 6,094 6,648 7,202   7220 Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" see below N/A see below see below see below see below   7220 11 00 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of >= 4,75 mm 5,470 N/A 5,470 6,017 6,564 7,111   7220 12 00 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of < 4,75 mm 5,470 N/A 5,470 6,017 6,564 7,111   7220 20 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" 5,540 N/A 5,540 6,094 6,648 7,202   7220 90 Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked 5,540 N/A 5,540 6,094 6,648 7,202   7221 Bars and rods of stainless steel, hot-rolled, in irregularly wound coils 5,310 N/A 5,310 5,841 6,372 6,903   7222 Other bars and rods of stainless steel; angles, shapes and sections of stainless steel, n.e.s. see below N/A see below see below see below see below   7222 11 Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only hot-extruded, of circular cross-section 5,310 N/A 5,310 5,841 6,372 6,903   7222 19 Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only extruded (excl. of circular cross-section) 5,310 N/A 5,310 5,841 6,372 6,903   7222 20 Other bars and rods of stainless steel, not further worked than cold-formed or cold-finished 5,310 N/A 5,310 5,841 6,372 6,903   7222 30 Other bars and rods of stainless steel, cold-formed or cold-finished and further worked, or not further worked than forged, or forged, or hot-formed by other means and further worked, n.e.s. 5,970 N/A 5,970 6,567 7,164 7,761   7222 40 Angles, shapes and sections of stainless steel, n.e.s. 5,310 N/A 5,310 5,841 6,372 6,903   7223 Wire of stainless steel, in coils (excl. bars and rods) see below N/A see below see below see below see below   7223 00 Wire of stainless steel, in coils (excl. bars and rods) 5,310 N/A 5,310 5,841 6,372 6,903   7224 Steel, alloy, other than stainless, in ingots or other primary forms, semi-finished products of alloy steel other than stainless (excl. waste and scrap in ingot form, and products obtained by continuous casting) see below N/A see below see below see below see below   7224 10 Steel, alloy, other than stainless, in ingots or other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) 6,950 N/A 6,950 7,645 8,340 9,035 (F) 7224 90 02 Semi-finished products of tool steel 6,450 N/A 6,450 7,095 7,740 8,385 (F) 7224 90 03 Semi-finished products of high-speed steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting the width measuring < twice the thickness 6,450 N/A 6,450 7,095 7,740 8,385 (F) 7224 90 05 Semi-finished products of steel containing by weight <= 0,7% of carbon, 0,5% to 1,2% of manganese, 0,6% to 2,3% of silicon, or of steel containing by weight >= 0,0008% of boron with any other element < the minimum content referred to in Note 1 f to chapter 72, of square or rectangular cross-section, hot rolled or obtained by continuous casting, the width measuring < twice the thickness 6,450 N/A 6,450 7,095 7,740 8,385 (F) 7224 90 07 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring < twice the thickness (excl. of tool steel, high-speed steel and articles of subheading 7224.90.05) 6,450 N/A 6,450 7,095 7,740 8,385 (F) 7224 90 14 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring >= twice the thickness (excl. of tool steel) 6,450 N/A 6,450 7,095 7,740 8,385 (F) 7224 90 18 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, forged (excl. of tool steel) 6,950 N/A 6,950 7,645 8,340 9,035 (F) 7224 90 31 Semi-finished products of steel containing by weight 0,9% to 1,15% carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting 6,450 N/A 6,450 7,095 7,740 8,385 (F) 7224 90 38 Semi-finished products of alloy steel, other than stainless steel, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting (excl. of tool steel and products containing by weight 0,9% to 1,15% of carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum) 6,450 N/A 6,450 7,095 7,740 8,385 (F) 7224 90 90 Semi-finished products of alloy steel, other than stainless steel, forged (excl. of tool steel and products of square or rectangular, circular or polygamol cross-section) 6,950 N/A 6,950 7,645 8,340 9,035 (F) 7225 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" see below N/A see below see below see below see below   7225 11 00 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, grain-oriented 8,500 N/A 8,500 9,350 10,200 11,050 (C) 7225 19 10 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, hot-rolled 6,450 N/A 6,450 7,095 7,740 8,385 (C) 7225 19 90 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, cold-rolled "cold-reduced", non-grain-oriented 6,520 N/A 6,520 7,172 7,824 8,476 (F) 7225 30 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, in coils (excl. products of silicon-electrical steel) 6,450 N/A 6,450 7,095 7,740 8,385 (F) 7225 40 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, not in coils (excl. products of silicon-electrical steel) 6,450 N/A 6,450 7,095 7,740 8,385 (F) 7225 50 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of silicon-electrical steel) 6,520 N/A 6,520 7,172 7,824 8,476 (F) 7225 91 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and electrolytically plated or coated with zinc (excl. products of silicon-electrical steel) 6,520 N/A 6,520 7,172 7,824 8,476 (F) 7225 92 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and plated or coated with zinc (excl. electrolytically plated or coated and products of silicon-electrical steel) 6,520 N/A 6,520 7,172 7,824 8,476 (F) 7225 99 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. plated or coated with zinc and products of silicon-electrical steel) 6,520 N/A 6,520 7,172 7,824 8,476 (F) 7226 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" see below N/A see below see below see below see below   7226 11 00 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", grain-oriented 8,500 N/A 8,500 9,350 10,200 11,050 (C) 7226 19 10 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, not further worked than hot-rolled 6,450 N/A 6,450 7,095 7,740 8,385 (C) 7226 19 80 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, cold-rolled "cold-reduced", whether or not further worked, or hot-rolled and further worked, non-grain-oriented 6,520 N/A 6,520 7,172 7,824 8,476 (F) 7226 20 00 Flat-rolled products of high-speed steel, of a width of <= 600 mm, hot-rolled or cold-rolled "cold-reduced" 6,450 N/A 6,450 7,095 7,740 8,385 (F) 7226 91 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than hot-rolled (excl. products of high-speed steel or silicon-electrical steel) 6,450 N/A 6,450 7,095 7,740 8,385 (F) 7226 92 00 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of high-speed steel or silicon-electrical steel) 6,520 N/A 6,520 7,172 7,824 8,476 (F) 7226 99 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. products of high-speed steel or silicon-electrical steel) 6,520 N/A 6,520 7,172 7,824 8,476 (F) 7227 Bars and rods of alloy steel other than stainless, hot-rolled, in irregularly wound coils 6,290 N/A 6,290 6,919 7,548 8,177 (C)/(F) 7228 Other bars and rods of alloy steel other than stainless, angles, shapes and sections of alloy steel other than stainless, n.e.s.; hollow drill bars and rods, of alloy or non-alloy steel see below N/A see below see below see below see below   7228 10 20 Bars and rods of high-speed steel, not further worked than hot-rolled, hot-drawn or extruded, and hot-rolled, hot-drawn or extruded, not further worked than clad (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 6,290 N/A 6,290 6,919 7,548 8,177 (F) 7228 10 50 Bars and rods of high-speed steel, forged (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 6,950 N/A 6,950 7,645 8,340 9,035 (F) 7228 10 90 Bars and rods of high-speed steel, not further worked than cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked (excl. forged products, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 6,290 N/A 6,290 6,919 7,548 8,177 (F) 7228 20 Bars and rods of silico-manganese steel (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 6,290 N/A 6,290 6,919 7,548 8,177 (F) 7228 30 Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 6,290 N/A 6,290 6,919 7,548 8,177 (C)/(F) 7228 40 Bars and rods of alloy steel other than stainless, not further worked than forged (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 6,950 N/A 6,950 7,645 8,340 9,035 (F) 7228 50 Bars and rods of alloy steel other than stainless, not further worked than cold-formed or cold-finished (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 6,290 N/A 6,290 6,919 7,548 8,177 (C)/(F) 7228 60 Bars and rods of alloy steel other than stainless, cold-formed or cold-finished and further worked or hot-formed and further worked, n.e.s. (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 6,290 N/A 6,290 6,919 7,548 8,177 (F) 7228 70 Angles, shapes and sections of alloy steel other than stainless, n.e.s. 6,290 N/A 6,290 6,919 7,548 8,177 (F) 7228 80 00 Hollow drill bars and rods, of alloy or non-alloy steel 6,290 N/A 6,290 6,919 7,548 8,177 (F) 7229 Wire of alloy steel other than stainless, in coils (excl. bars and rods) 6,290 N/A 6,290 6,919 7,548 8,177 (C)/(F) 7301 Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel 2,510 N/A 2,510 2,761 3,012 3,263 (C) 7302 Railway or tramway track construction material of iron or steel, the following : rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers "cross-ties", fish-plates, chairs, chair wedges, sole plates "base plates", rail clips, bedplates, ties and other material specialised for jointing or fixing rails 5,360 N/A 5,360 5,896 6,432 6,968 (C) 7303 Tubes, pipes and hollow profiles, of cast iron see below N/A see below see below see below see below   7303 00 Tubes, pipes and hollow profiles, of cast iron 2,480 N/A 2,480 2,728 2,976 3,224   7304 Tubes, pipes and hollow profiles, seamless, of iron or steel (excl. products of cast iron) see below N/A see below see below see below see below   7304 11 00 Line pipe of a kind used for oil or gas pipelines, seamless, of stainless steel 5,690 N/A 5,690 6,259 6,828 7,397   7304 19 Line pipe of a kind used for oil or gas pipelines, seamless, of iron or steel (excl. products of stainless steel or of cast iron) 2,340 N/A 2,340 2,574 2,808 3,042 (C) 7304 22 00 Drill pipe, seamless, of stainless steel, of a kind used in drilling for oil or gas 5,690 N/A 5,690 6,259 6,828 7,397   7304 23 00 Drill pipe, seamless, of a kind used in drilling for oil or gas, of iron or steel (excl. products of stainless steel or of cast iron) 2,340 N/A 2,340 2,574 2,808 3,042 (C) 7304 24 00 Casing and tubing, seamless, of a kind used for drilling for oil or gas, of stainless steel 5,690 N/A 5,690 6,259 6,828 7,397   7304 29 Casing and tubing, seamless, of iron or steel, of a kind used in drilling for oil or gas (excl. products of cast iron) 2,340 N/A 2,340 2,574 2,808 3,042 (C) 7304 31 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" (excl. cast iron products and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used for drilling for oil or gas) 2,340 N/A 2,340 2,574 2,808 3,042 (C) 7304 39 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, not cold-drawn or cold-rolled "cold-reduced" (excl. cast iron products, line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas) 2,340 N/A 2,340 2,574 2,808 3,042 (C) 7304 41 00 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas) 5,690 N/A 5,690 6,259 6,828 7,397   7304 49 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines or of a kind used for drilling for oil or gas) 5,690 N/A 5,690 6,259 6,828 7,397   7304 51 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil) 2,360 N/A 2,360 2,596 2,832 3,068 (F) 7304 59 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil) 2,360 N/A 2,360 2,596 2,832 3,068 (C)/(F) 7304 90 00 Tubes, pipes and hollow profiles, seamless, of non-circular cross-section, of iron or steel (excl. products of cast iron) 2,340 N/A 2,340 2,574 2,808 3,042 (C) 7305 Tubes and pipes, having circular cross-sections and an external diameter of > 406,4 mm, of flat-rolled products of iron or steel "e.g., welded, riveted or similarly closed" 2,182 N/A 2,182 2,400 2,618 2,837 (C) 7306 Tubes, pipes and hollow profiles "e.g., open seam or welded, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless tubes and pipes and tubes having internal and external circular cross-sections and an external diameter of > 406,4 mm) see below N/A see below see below see below see below   7306 11 00 Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm 5,920 N/A 5,920 6,512 7,104 7,696   7306 19 00 Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron) 2,244 N/A 2,244 2,468 2,693 2,917 (C) 7306 21 00 Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm 5,920 N/A 5,920 6,512 7,104 7,696   7306 29 00 Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron) 2,244 N/A 2,244 2,468 2,693 2,917 (C) 7306 30 12 Precision tubes, welded, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" 2,244 N/A 2,244 2,468 2,693 2,917 (C) 7306 30 18 Precision tubes, welded, of circular cross-section, of iron or non-alloy steel (excl. cold-drawn or cold-rolled) 2,244 N/A 2,244 2,468 2,693 2,917   7306 30 41 Threaded or threadable tubes "gas pipe", welded, of circular cross-section, of iron or non-alloy steel, plated or coated with zinc 2,244 N/A 2,244 2,468 2,693 2,917 (C) 7306 30 49 Threaded or threadable tubes "gas pipe", welded, of circular cross-section, of iron or non-alloy steel (excl. products plated or coated with zinc) 2,244 N/A 2,244 2,468 2,693 2,917 (C) 7306 30 72 Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel, of an external diameter of <= 168,3 mm, plated or coated with zinc (excl. line pipe of a kind used for oil or gas pipelines or casing and tubingof a kind used in drilling for oil or gas) 2,244 N/A 2,244 2,468 2,693 2,917 (C) 7306 30 77 Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel of an external diameter of <= 168,3 mm (excl. plated or coated with zinc and line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used in drilling for oil or gas, precision tubes and threaded or threadable tubes "gas pipe") 2,244 N/A 2,244 2,468 2,693 2,917 (C) 7306 30 80 Tubes, pipes and hollow profiles, welded, having a circular cross-section, of iron or steel, of an external diameter of > 168,3 mm but <= 406,4 mm (excl. line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, or precision steel tubes, electrical conduit tubes or threaded or threadable tubes "gas pipe") 2,244 N/A 2,244 2,468 2,693 2,917 (C) 7306 40 20 Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. products having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) 5,920 N/A 5,920 6,512 7,104 7,696   7306 40 80 Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel (excl. products cold-drawn or cold-rolled "cold-reduced", tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) 5,850 N/A 5,850 6,435 7,020 7,605   7306 50 21 Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" 2,244 N/A 2,244 2,468 2,693 2,917 (F) 7306 50 29 Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless (excl. cold-drawn or cold-rolled) 2,244 N/A 2,244 2,468 2,693 2,917 (F) 7306 50 80 Tubes, pipes and hollow profiles, welded, of circular cross-section, of alloy steel other than stainless (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and precision steel tubes) 2,244 N/A 2,244 2,468 2,693 2,917 (F) 7306 61 10 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel 5,920 N/A 5,920 6,512 7,104 7,696   7306 61 92 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of <= 2 mm 2,244 N/A 2,244 2,468 2,693 2,917 (C) 7306 61 99 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of > 2 mm 2,244 N/A 2,244 2,468 2,693 2,917 (C) 7306 69 10 Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) 5,920 N/A 5,920 6,512 7,104 7,696   7306 69 90 Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of iron or steel other than stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) 2,244 N/A 2,244 2,468 2,693 2,917 (C) 7306 90 00 Tubes, pipes and hollow profiles "e.g., open seam, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless or welded tubes and pipes and tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm) 2,244 N/A 2,244 2,468 2,693 2,917 (C) 7307 Tube or pipe fittings "e.g. couplings, elbows, sleeves", of iron or steel see below N/A see below see below see below see below   7307 11 Tube or pipe fittings of non-malleable cast iron 3,151 N/A 3,151 3,466 3,781 4,096   7307 19 10 Tube or pipe fittings of cast iron (excl. of non-malleable) 3,151 N/A 3,151 3,466 3,781 4,096   7307 19 90 Cast tube or pipe fittings of steel 3,151 N/A 3,151 3,466 3,781 4,096 (C) 7307 21 00 Flanges of stainless steel (excl. cast products) 3,710 N/A 3,710 4,081 4,452 4,823   7307 22 Threaded elbows, bends and sleeves of stainless steel (excl. cast products) 3,710 N/A 3,710 4,081 4,452 4,823   7307 23 Butt welding tube or pipe fittings of stainless steel (excl. cast products) 3,710 N/A 3,710 4,081 4,452 4,823   7307 29 Tube or pipe fittings of stainless steel (excl. cast products, flanges, threaded elbows, bends and sleeves and butt weldings fittings) 3,710 N/A 3,710 4,081 4,452 4,823   7307 91 00 Flanges of iron or steel (excl. cast or stainless products) 3,151 N/A 3,151 3,466 3,781 4,096 (C) 7307 92 Threaded elbows, bends and sleeves, of stainless steel (excl. cast or stainless products) 3,151 N/A 3,151 3,466 3,781 4,096 (C) 7307 93 Butt welding fittings of iron or steel (excl. cast iron or stainless steel products, and flanges) 3,151 N/A 3,151 3,466 3,781 4,096 (C) 7307 99 Tube or pipe fittings, of iron or steel (excl. cast iron or stainless steel products; flanges; threaded elbows, bends and sleeves; butt welding fittings) 3,151 N/A 3,151 3,466 3,781 4,096 (C) 7308 Structures and parts of structures "e.g., bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns", of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel (excl. prefabricated buildings of heading 9406) 5,520 N/A 5,520 6,072 6,624 7,176 (C) 7309 Reservoirs, tanks, vats and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of > 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated (excl. containers specifically constructed or equipped for one or more types of transport) 5,600 N/A 5,600 6,160 6,720 7,280 (C) 7310 Tanks, casks, drums, cans, boxes and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of <= 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated, n.e.s. 3,030 N/A 3,030 3,333 3,636 3,939 (C) 7311 Containers of iron or steel, for compressed or liquefied gas (excl. containers specifically constructed or equipped for one or more types of transport) see below N/A see below see below see below see below   7311 00 Containers of iron or steel, for compressed or liquefied gas (excl. containers specifically constructed or equipped for one or more types of transport) 5,430 N/A 5,430 5,973 6,516 7,059 (C) 7318 Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers, incl. spring washers, and similar articles, of iron or steel (excl. lag screws, stoppers, plugs and the like, threaded) see below N/A see below see below see below see below   7318 11 00 Coach screws of iron or steel 2,832 N/A 2,832 3,115 3,398 3,682 (C) 7318 12 10 Wood screws of stainless steel (excl. coach screws) 5,690 N/A 5,690 6,259 6,828 7,397 (C) 7318 12 90 Wood screws of iron or steel other than stainless (excl. coach screws) 2,832 N/A 2,832 3,115 3,398 3,682 (C) 7318 13 00 Screw hooks and screw rings, of iron or steel 2,832 N/A 2,832 3,115 3,398 3,682 (C) 7318 14 10 Self-tapping screws, of stainless steel (excl. wood screws) 5,690 N/A 5,690 6,259 6,828 7,397 (C) 7318 14 91 Spaced-thread screws of iron or steel other than stainless 2,832 N/A 2,832 3,115 3,398 3,682 (C) 7318 14 99 Self-tapping screws of iron or steel other than stainless (excl. spaced-thread screws and wood screws) 2,832 N/A 2,832 3,115 3,398 3,682 (C) 7318 15 Threaded screws and bolts, of iron or steel, whether or not with their nuts and washers (excl. coach screws and other wood screws, screw hooks and screw rings, self-tapping screws, lag screws, stoppers, plugs and the like, threaded) 5,430 N/A 5,430 5,973 6,516 7,059 (C) 7318 16 Nuts of iron or steel 3,790 N/A 3,790 4,169 4,548 4,927 (C) 7318 19 00 Threaded articles, of iron or steel, n.e.s. 2,832 N/A 2,832 3,115 3,398 3,682 (C) 7318 21 00 Spring washers and other lock washers, of iron or steel 2,832 N/A 2,832 3,115 3,398 3,682 (C) 7318 22 00 Washers of iron or steel (excl. spring washers and other lock washers) 3,430 N/A 3,430 3,773 4,116 4,459 (C) 7318 23 00 Rivets of iron or steel (excl. tubular and bifurcated rivets for particular uses) 2,832 N/A 2,832 3,115 3,398 3,682 (C) 7318 24 00 Cotters and cotter pins, of iron or steel 2,832 N/A 2,832 3,115 3,398 3,682 (C) 7318 29 00 Non-threaded articles, of iron or steel 2,832 N/A 2,832 3,115 3,398 3,682 (C) 7326 Articles of iron or steel, n.e.s. (excl. cast articles) see below N/A see below see below see below see below   7326 11 00 Grinding balls and similar articles for mills, of iron or steel, forged or stamped, but not further worked 3 N/A 3 3,300 3,600 3,900 (C) 7326 19 Articles of iron or steel, forged or stamped, but not further worked, n.e.s. (excl. grinding balls and similar articles for mills) 3 N/A 3 3,300 3,600 3,900 (C) 7326 20 00 Articles of iron or steel wire, n.e.s. 2,583 N/A 2,583 2,841 3,100 3,358 (C) 7326 90 30 Ladders and steps, of iron or steel 2,583 N/A 2,583 2,841 3,100 3,358 (C) 7326 90 40 Pallets and similar platforms for handling goods, of iron or steel 2,583 N/A 2,583 2,841 3,100 3,358 (C) 7326 90 50 Reels for cables, piping and the like, of iron or steel 2,583 N/A 2,583 2,841 3,100 3,358 (C) 7326 90 60 Ventilators, non-mechanical, guttering, hooks and like articles used in the building industry, n.e.s., of iron or steel 2,583 N/A 2,583 2,841 3,100 3,358 (C) 7326 90 92 Articles of iron or steel, open-die forged, n.e.s. 3 N/A 3 3,300 3,600 3,900 (C) 7326 90 94 Articles of iron or steel, closed-die forged, n.e.s. 3 N/A 3 3,300 3,600 3,900 (C) 7326 90 96 Sintered articles of iron or steel, n.e.s. 3 N/A 3 3,300 3,600 3,900 (C) 7326 90 98 Articles of iron or steel, n.e.s. 2,583 N/A 2,583 2,841 3,100 3,358 (C) Turkmenistan Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – – – –   2523 10 00 White clinker – – – – – –   2523 10 00 Grey clinker 1,360 0,050 1,400 1,540 1,680 1,820 (A) 2523 21 00 White Portland cement – – – – – –   2523 29 00 Grey Portland cement 1,360 0,090 1,440 1,584 1,728 1,872   2523 90 00 White hydraulic cements – – – – – –   2523 90 00 Grey hydraulic cements 1,290 0,090 1,380 1,518 1,656 1,794 (A) 2523 30 00 Aluminous cement – – – – – –   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 2,690 0,070 2,760 2,788 2,788 2,788   2814 10 00 Anhydrous ammonia 2,160 0,210 2,370 2,394 2,394 2,394   2814 20 00 Ammonia in aqueous solution 0,650 0,060 0,710 0,717 0,717 0,717   2834 21 00 Nitrate of potassium 2,170 0,100 2,270 2,293 2,293 2,293   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,470 0,050 0,520 0,525 0,525 0,525   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,770 0,050 0,830 0,838 0,838 0,838   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,410 0,160 1,570 1,586 1,586 1,586   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,380 0,160 1,530 1,545 1,545 1,545   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,620 0,120 0,740 0,747 0,747 0,747   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,390 0,130 1,520 1,535 1,535 1,535   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,640 0,100 1,750 1,768 1,768 1,768   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,530 0,160 2,690 2,717 2,717 2,717   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,150 0,140 2,300 2,323 2,323 2,323   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,150 0,140 2,300 2,323 2,323 2,323   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 4,200 0,100 4,310 4,353 4,353 4,353   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,120 0,140 2,260 2,283 2,283 2,283   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,580 0,120 1,700 1,717 1,717 1,717   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,600 0,150 1,750 1,768 1,768 1,768   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,800 0,120 0,920 0,929 0,929 0,929   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,050 0,140 1,200 1,212 1,212 1,212   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,710 0,110 0,820 0,828 0,828 0,828   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,500 0,090 0,590 0,596 0,596 0,596   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,320 0,070 0,390 0,394 0,394 0,394   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,450 0,180 1,630 1,646 1,646 1,646   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,570 0,130 0,710 0,717 0,717 0,717   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,430 0,110 1,540 1,555 1,555 1,555   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,730 0,080 0,810 0,818 0,818 0,818   Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066   Uganda Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – – – –   2523 10 00 White clinker – – – – – –   2523 10 00 Grey clinker 0,950 0,010 0,950 1,045 1,140 1,235 (A) 2523 21 00 White Portland cement – – – – – –   2523 29 00 Grey Portland cement 0,990 0,020 1,010 1,111 1,212 1,313   2523 90 00 White hydraulic cements – – – – – –   2523 90 00 Grey hydraulic cements 0,940 0,030 0,970 1,067 1,164 1,261 (A) 2523 30 00 Aluminous cement – – – – – –   Aluminium         10 % mark-up 20 % mark-up 30 % mark-up   7601 Unwrought aluminium 0,360 N/A 0,360 0,396 0,432 0,468 (L) 7603 Aluminium powders and flakes 0,510 N/A 0,510 0,561 0,612 0,663 (L) 7604 10 10 Bars and rods 0,730 N/A 0,730 0,803 0,876 0,949 (L) 7604 10 90 Profiles 0,750 N/A 0,750 0,825 0,900 0,975 (L) 7604 21 00 Hollow profiles 0,750 N/A 0,750 0,825 0,900 0,975 (L) 7604 29 10 Bars and rods 0,730 N/A 0,730 0,803 0,876 0,949 (L) 7604 29 90 Profiles 0,750 N/A 0,750 0,825 0,900 0,975 (L) 7605 Aluminium wire 0,730 N/A 0,730 0,803 0,876 0,949 (L) 7606 Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm 1,190 N/A 1,190 1,309 1,428 1,547 (L) 7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm 1,190 N/A 1,190 1,309 1,428 1,547 (L) 7608 Aluminium tubes and pipes 0,750 N/A 0,750 0,825 0,900 0,975 (L) 7609 00 00 Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) 0,750 N/A 0,750 0,825 0,900 0,975 (L) 7610 10 00 Doors, windows and their frames and thresholds for doors 0,750 N/A 0,750 0,825 0,900 0,975 (L) 7610 90 Other 0,750 N/A 0,750 0,825 0,900 0,975 (L) 7610 90 10 Bridges and bridge-sections, towers and lattice masts 0,750 N/A 0,750 0,825 0,900 0,975 (L) 7610 90 90 Other 0,750 N/A 0,750 0,825 0,900 0,975 (L) 7611 00 00 Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 1,190 N/A 1,190 1,309 1,428 1,547 (L) 7612 Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 1,190 N/A 1,190 1,309 1,428 1,547 (L) 7613 00 00 Aluminium containers for compressed or liquefied gas 1,190 N/A 1,190 1,309 1,428 1,547 (L) 7614 Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated 0,730 N/A 0,730 0,803 0,876 0,949 (L) 7616 10 00 Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles 1,190 N/A 1,190 1,309 1,428 1,547 (L) 7616 91 00 Cloth, grill, netting and fencing, of aluminium wire 1,190 N/A 1,190 1,309 1,428 1,547 (L) 7616 99 10 Cast 0,510 N/A 0,510 0,561 0,612 0,663 (L) 7616 99 90 Other 1,190 N/A 1,190 1,309 1,428 1,547 (L) Ukraine Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – – – –   2523 10 00 White clinker – – – – – –   2523 10 00 Grey clinker 1,340 0,030 1,370 1,507 1,644 1,781 (A) 2523 21 00 White Portland cement – – – – – –   2523 29 00 Grey Portland cement 1,340 0,050 1,380 1,518 1,656 1,794   2523 90 00 White hydraulic cements – – – – – –   2523 90 00 Grey hydraulic cements 1,270 0,050 1,320 1,452 1,584 1,716 (A) 2523 30 00 Aluminous cement – – – – – –   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 2,700 0,030 2,730 2,757 2,757 2,757   2814 10 00 Anhydrous ammonia 2,160 0,090 2,250 2,273 2,273 2,273   2814 20 00 Ammonia in aqueous solution 0,650 0,030 0,680 0,687 0,687 0,687   2834 21 00 Nitrate of potassium 2,180 0,040 2,220 2,242 2,242 2,242   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,460 0,020 0,480 0,485 0,485 0,485   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,760 0,020 0,780 0,788 0,788 0,788   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,380 0,070 1,450 1,465 1,465 1,465   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,350 0,070 1,420 1,434 1,434 1,434   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,620 0,050 0,670 0,677 0,677 0,677   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,390 0,060 1,450 1,465 1,465 1,465   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,640 0,040 1,690 1,707 1,707 1,707   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,530 0,070 2,600 2,626 2,626 2,626   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,150 0,060 2,220 2,242 2,242 2,242   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,150 0,060 2,220 2,242 2,242 2,242   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 4,220 0,050 4,270 4,313 4,313 4,313   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,120 0,060 2,180 2,202 2,202 2,202   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,570 0,060 1,630 1,646 1,646 1,646   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,590 0,060 1,660 1,677 1,677 1,677   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,800 0,050 0,850 0,859 0,859 0,859   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,050 0,060 1,120 1,131 1,131 1,131   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,710 0,050 0,760 0,768 0,768 0,768   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,500 0,040 0,540 0,545 0,545 0,545   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,320 0,030 0,350 0,354 0,354 0,354   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,450 0,080 1,530 1,545 1,545 1,545   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,570 0,080 0,640 0,646 0,646 0,646   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,430 0,050 1,480 1,495 1,495 1,495   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,730 0,030 0,760 0,768 0,768 0,768   Aluminium         10 % mark-up 20 % mark-up 30 % mark-up   7601 Unwrought aluminium 0,360 N/A 0,360 0,396 0,432 0,468 (L) 7603 Aluminium powders and flakes 0,490 N/A 0,490 0,539 0,588 0,637 (L) 7604 10 10 Bars and rods 0,720 N/A 0,720 0,792 0,864 0,936 (L) 7604 10 90 Profiles 0,730 N/A 0,730 0,803 0,876 0,949 (L) 7604 21 00 Hollow profiles 0,730 N/A 0,730 0,803 0,876 0,949 (L) 7604 29 10 Bars and rods 0,720 N/A 0,720 0,792 0,864 0,936 (L) 7604 29 90 Profiles 0,730 N/A 0,730 0,803 0,876 0,949 (L) 7605 Aluminium wire 0,720 N/A 0,720 0,792 0,864 0,936 (L) 7606 Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm 1,180 N/A 1,180 1,298 1,416 1,534 (L) 7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm 1,180 N/A 1,180 1,298 1,416 1,534 (L) 7608 Aluminium tubes and pipes 0,730 N/A 0,730 0,803 0,876 0,949 (L) 7609 00 00 Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) 0,730 N/A 0,730 0,803 0,876 0,949 (L) 7610 10 00 Doors, windows and their frames and thresholds for doors 0,730 N/A 0,730 0,803 0,876 0,949 (L) 7610 90 Other 0,730 N/A 0,730 0,803 0,876 0,949 (L) 7610 90 10 Bridges and bridge-sections, towers and lattice masts 0,730 N/A 0,730 0,803 0,876 0,949 (L) 7610 90 90 Other 0,730 N/A 0,730 0,803 0,876 0,949 (L) 7611 00 00 Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 1,180 N/A 1,180 1,298 1,416 1,534 (L) 7612 Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 1,180 N/A 1,180 1,298 1,416 1,534 (L) 7613 00 00 Aluminium containers for compressed or liquefied gas 1,180 N/A 1,180 1,298 1,416 1,534 (L) 7614 Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated 0,720 N/A 0,720 0,792 0,864 0,936 (L) 7616 10 00 Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles 1,180 N/A 1,180 1,298 1,416 1,534 (L) 7616 91 00 Cloth, grill, netting and fencing, of aluminium wire 1,180 N/A 1,180 1,298 1,416 1,534 (L) 7616 99 10 Cast 0,490 N/A 0,490 0,539 0,588 0,637 (L) 7616 99 90 Other 1,180 N/A 1,180 1,298 1,416 1,534 (L) Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066   Iron and steel         10 % mark-up 20 % mark-up 30 % mark-up   2601 12 00 Agglomerated iron ores and concentrates (excl. roasted iron pyrites) 0,080 0,050 0,120 0,132 0,144 0,156   7201 Pig iron and spiegeleisen, in pigs, blocks or other primary forms 2,173 N/A 2,173 2,390 2,608 2,825   7202 11 Ferro-manganese, containing by weight > 2% of carbon 1,690 N/A 1,690 1,859 2,028 2,197   7202 19 Ferro-manganese, containing by weight <= 2% carbon – N/A – – – –   7202 41 Ferro-chromium, containing by weight > 4% of carbon 2,350 N/A 2,350 2,585 2,820 3,055   7202 49 Ferro-chromium, containing by weight <= 4% of carbon – N/A – – – –   7202 60 00 Ferro-nickel 3,480 N/A 3,480 3,828 4,176 4,524   7203 Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99,94%, in lumps, pellets or similar forms – N/A – – – –   7205 Granules and powders of pig iron, spiegeleisen, iron or steel (excl. granules and powders of ferro-alloys, turnings and filings of iron or steel, radioactive iron powders "isotopes" and certain low-calibre, substandard balls for ballbearings) 1,910 N/A 1,910 2,101 2,292 2,483 (C) 7206 Iron and non-alloy steel in ingots or other primary forms (excl. remelting scrap ingots, products obtained by continuous casting and iron of heading 7203) see below N/A see below see below see below see below   7206 10 00 Ingots, of iron and non-alloy steel (excl. remelted scrap ingots, continuous cast products, iron of heading 7203) 1,970 N/A 1,970 2,167 2,364 2,561 (C) 7206 90 00 Iron and non-alloy steel, in puddled bars or other primary forms (excl. ingots, remelted scrap ingots, continuous cast products, iron of heading 7203) 1,970 N/A 1,970 2,167 2,364 2,561 (C) 7207 Semi-finished products of iron or non-alloy steel see below N/A see below see below see below see below   7207 11 11 Semi-finished products, of non-alloy free-cutting steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting 2,397 N/A 2,397 2,637 2,877 3,117 (C) 7207 11 14 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness of <= 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel) 2,397 N/A 2,397 2,637 2,877 3,117 (C) 7207 11 16 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness of > 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel) 2,397 N/A 2,397 2,637 2,877 3,117 (C) 7207 11 90 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular cross-section, the width < twice the thickness, forged 2,397 N/A 2,397 2,637 2,877 3,117 (C) 7207 12 10 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtained by continuous casting 2,397 N/A 2,397 2,637 2,877 3,117 (C) 7207 12 90 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular "other than square" cross-section, the width >= twice the thickness, forged 2,397 N/A 2,397 2,637 2,877 3,117 (C) 7207 19 12 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting 2,397 N/A 2,397 2,637 2,877 3,117 (C) 7207 19 19 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, forged 2,397 N/A 2,397 2,637 2,877 3,117 (C) 7207 19 80 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon (excl. semi-products, of square, rectangular, circular or polygonal cross-section) 2,397 N/A 2,397 2,637 2,877 3,117 (C) 7207 20 11 Semi-finished products, of non-alloy free-cutting steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting 2,397 N/A 2,397 2,637 2,877 3,117 (C) 7207 20 15 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% but < 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel) 2,397 N/A 2,397 2,637 2,877 3,117 (C) 7207 20 17 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel) 2,397 N/A 2,397 2,637 2,877 3,117 (C) 7207 20 19 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, forged 2,397 N/A 2,397 2,637 2,877 3,117 (C) 7207 20 32 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtained by continuous casting 2,397 N/A 2,397 2,637 2,877 3,117 (C) 7207 20 39 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of rectangular "other than square" cross-section and the width >= twice the thickness, forged 2,397 N/A 2,397 2,637 2,877 3,117 (C) 7207 20 52 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting 2,397 N/A 2,397 2,637 2,877 3,117 (C) 7207 20 59 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of circular or polygonal cross-section, forged 2,397 N/A 2,397 2,637 2,877 3,117 (C) 7207 20 80 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon (excl. those of square, rectangular, circular or polygonal cross-section) 2,397 N/A 2,397 2,637 2,877 3,117 (C) 7208 Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled, not clad, plated or coated 2,483 N/A 2,483 2,731 2,979 3,227 (C) 7209 Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, cold-rolled "cold-reduced", not clad, plated or coated 2,544 N/A 2,544 2,798 3,052 3,307 (C) 7210 Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated 2,544 N/A 2,544 2,798 3,052 3,307 (C) 7211 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", not clad, plated or coated see below N/A see below see below see below see below   7211 13 00 Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as "wide flats" 2,483 N/A 2,483 2,731 2,979 3,227 (C) 7211 14 00 Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, not further worked than hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm (excl. "wide flats") 2,483 N/A 2,483 2,731 2,979 3,227 (C) 7211 19 00 Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, simply hot-rolled, not clad, plated or coated, of a thickness < 4,75 mm (excl. "wide flats") 2,483 N/A 2,483 2,731 2,979 3,227 (C) 7211 23 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight < 0,25% of carbon 2,544 N/A 2,544 2,798 3,052 3,307 (C) 7211 29 00 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight >= 0,25% of carbon 2,544 N/A 2,544 2,798 3,052 3,307 (C) 7211 90 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked, but not clad, plated or coated 2,544 N/A 2,544 2,798 3,052 3,307 (C) 7212 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated 2,544 N/A 2,544 2,798 3,052 3,307 (C) 7213 Bars and rods of iron or non-alloy steel, hot-rolled, in irregularly wound coils 2,397 N/A 2,397 2,637 2,877 3,117 (C) 7214 Bars and rods, of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but incl. those twisted after rolling (excl. in irregularly wound coils) see below N/A see below see below see below see below   7214 10 00 Bars and rods, of iron or non-alloy steel, not further worked than forged (excl. in irregularly wound coils) 2,397 N/A 2,397 2,637 2,877 3,117 (C) 7214 20 00 Bars and rods, of iron or non-alloy steel, with indentations, ribs, groves or other deformations produced during the rolling process 2,397 N/A 2,397 2,637 2,877 3,117 (C) 7214 30 00 Bars and rods, of non-alloy free-cutting steel, not further worked than hot-rolled, hot-drawn or hot-extruded (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling) 2,397 N/A 2,397 2,637 2,877 3,117 (C) 7214 91 Bars and rods, of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, of rectangular "other than square" cross-section (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process, bars and rods twisted after rolling and free-cutting steel) 2,397 N/A 2,397 2,637 2,877 3,117 (C) 7214 99 Bars and rods, of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded (excl. of rectangular [other than square] cross-section and those containing indentations, ribs, grooves or other deformations produced during the rolling process, and of non-alloy free-cutting steel) 2,397 N/A 2,397 2,637 2,877 3,117 (C) 7215 Bars and rods, of iron or non-alloy steel, cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked, n.e.s. 2,397 N/A 2,397 2,637 2,877 3,117 (C) 7216 Angles, shapes and sections of iron or non-alloy steel, n.e.s. 2,397 N/A 2,397 2,637 2,877 3,117 (C) 7217 Wire of iron or non-alloy steel, in coils (excl. bars and rods) see below N/A see below see below see below see below   7217 10 Wire of iron or non-alloy steel, in coils, not plated or coated, whether or not polished (excl. bars and rods) 2,397 N/A 2,397 2,637 2,877 3,117 (C) 7217 20 Wire of iron or non-alloy steel, in coils, plated or coated with zinc (excl. bars and rods) 2,397 N/A 2,397 2,637 2,877 3,117 (C) 7217 30 Wire of iron or non-alloy steel, in coils, plated or coated with base metals (excl. plated or coated with zinc, and bars and rods) 2,397 N/A 2,397 2,637 2,877 3,117 (C) 7217 90 Wire of iron or non-alloy steel, in coils, plated or coated (excl. plated or coated with base metals, and bars and rods) 2,397 N/A 2,397 2,637 2,877 3,117 (C) 7218 Stainless steel in ingots or other primary forms (excl. remelting scrap ingots and products obtained by continuous casting); semi-finished products of stainless steel see below N/A see below see below see below see below   7218 10 00 Steel, stainless, in ingots and other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) 3,110 N/A 3,110 3,421 3,732 4,043   7218 91 Semi-finished products of stainless steel, of rectangular "other than square" cross-section 3,230 N/A 3,230 3,553 3,876 4,199   7218 99 11 Semi-finished products of stainless steel, of square cross-section, rolled or obtained by continuous casting 3,230 N/A 3,230 3,553 3,876 4,199   7218 99 19 Semi-finished products of stainless steel, of square cross-section, forged 3,110 N/A 3,110 3,421 3,732 4,043   7218 99 20 Semi-finished products of stainless steel, of circular cross-section or of cross-section other than square or rectangular, rolled or obtained by continuous casting 3,230 N/A 3,230 3,553 3,876 4,199   7218 99 80 Semi-finished products of stainless steel, forged (excl. products of square or rectangular cross-section) 3,110 N/A 3,110 3,421 3,732 4,043   7219 Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" see below N/A see below see below see below see below   7219 11 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of > 10 mm 3,230 N/A 3,230 3,553 3,876 4,199   7219 12 Flat-rolled products of stainless steel, of a width of>= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 4,7 mm and <= 10 mm 3,230 N/A 3,230 3,553 3,876 4,199   7219 13 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 3 mm and < 4,75 mm 3,230 N/A 3,230 3,553 3,876 4,199   7219 14 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of < 3 mm 3,230 N/A 3,230 3,553 3,876 4,199   7219 21 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of > 10 mm 3,230 N/A 3,230 3,553 3,876 4,199   7219 22 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 4,75 mm and <= 10 mm 3,230 N/A 3,230 3,553 3,876 4,199   7219 23 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 3 mm and < 4,75 mm 3,230 N/A 3,230 3,553 3,876 4,199   7219 24 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of < 3 mm 3,230 N/A 3,230 3,553 3,876 4,199   7219 31 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 4,75 mm 3,280 N/A 3,280 3,608 3,936 4,264   7219 32 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 3 mm but < 4,75 mm 3,280 N/A 3,280 3,608 3,936 4,264   7219 33 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of > 1 mm but < 3 mm 3,280 N/A 3,280 3,608 3,936 4,264   7219 34 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 0,5 mm but <= 1 mm 3,280 N/A 3,280 3,608 3,936 4,264   7219 35 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of < 0,5 mm 3,280 N/A 3,280 3,608 3,936 4,264   7219 90 Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked 3,280 N/A 3,280 3,608 3,936 4,264   7220 Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" see below N/A see below see below see below see below   7220 11 00 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of >= 4,75 mm 3,230 N/A 3,230 3,553 3,876 4,199   7220 12 00 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of < 4,75 mm 3,230 N/A 3,230 3,553 3,876 4,199   7220 20 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" 3,280 N/A 3,280 3,608 3,936 4,264   7220 90 Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked 3,280 N/A 3,280 3,608 3,936 4,264   7221 Bars and rods of stainless steel, hot-rolled, in irregularly wound coils 3,110 N/A 3,110 3,421 3,732 4,043   7222 Other bars and rods of stainless steel; angles, shapes and sections of stainless steel, n.e.s. see below N/A see below see below see below see below   7222 11 Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only hot-extruded, of circular cross-section 3,110 N/A 3,110 3,421 3,732 4,043   7222 19 Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only extruded (excl. of circular cross-section) 3,110 N/A 3,110 3,421 3,732 4,043   7222 20 Other bars and rods of stainless steel, not further worked than cold-formed or cold-finished 3,110 N/A 3,110 3,421 3,732 4,043   7222 30 Other bars and rods of stainless steel, cold-formed or cold-finished and further worked, or not further worked than forged, or forged, or hot-formed by other means and further worked, n.e.s. 3,110 N/A 3,110 3,421 3,732 4,043   7222 40 Angles, shapes and sections of stainless steel, n.e.s. 3,110 N/A 3,110 3,421 3,732 4,043   7223 Wire of stainless steel, in coils (excl. bars and rods) see below N/A see below see below see below see below   7223 00 Wire of stainless steel, in coils (excl. bars and rods) 3,110 N/A 3,110 3,421 3,732 4,043   7224 Steel, alloy, other than stainless, in ingots or other primary forms, semi-finished products of alloy steel other than stainless (excl. waste and scrap in ingot form, and products obtained by continuous casting) see below N/A see below see below see below see below   7224 10 Steel, alloy, other than stainless, in ingots or other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) 3,420 N/A 3,420 3,762 4,104 4,446 (F) 7224 90 02 Semi-finished products of tool steel 3,540 N/A 3,540 3,894 4,248 4,602 (F) 7224 90 03 Semi-finished products of high-speed steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting the width measuring < twice the thickness 3,540 N/A 3,540 3,894 4,248 4,602 (F) 7224 90 05 Semi-finished products of steel containing by weight <= 0,7% of carbon, 0,5% to 1,2% of manganese, 0,6% to 2,3% of silicon, or of steel containing by weight >= 0,0008% of boron with any other element < the minimum content referred to in Note 1 f to chapter 72, of square or rectangular cross-section, hot rolled or obtained by continuous casting, the width measuring < twice the thickness 3,540 N/A 3,540 3,894 4,248 4,602 (F) 7224 90 07 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring < twice the thickness (excl. of tool steel, high-speed steel and articles of subheading 7224.90.05) 3,540 N/A 3,540 3,894 4,248 4,602 (F) 7224 90 14 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring >= twice the thickness (excl. of tool steel) 3,540 N/A 3,540 3,894 4,248 4,602 (F) 7224 90 18 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, forged (excl. of tool steel) 3,420 N/A 3,420 3,762 4,104 4,446 (F) 7224 90 31 Semi-finished products of steel containing by weight 0,9% to 1,15% carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting 3,540 N/A 3,540 3,894 4,248 4,602 (F) 7224 90 38 Semi-finished products of alloy steel, other than stainless steel, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting (excl. of tool steel and products containing by weight 0,9% to 1,15% of carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum) 3,540 N/A 3,540 3,894 4,248 4,602 (F) 7224 90 90 Semi-finished products of alloy steel, other than stainless steel, forged (excl. of tool steel and products of square or rectangular, circular or polygamol cross-section) 3,420 N/A 3,420 3,762 4,104 4,446 (F) 7225 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" see below N/A see below see below see below see below   7225 11 00 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, grain-oriented 4,650 N/A 4,650 5,115 5,580 6,045 (C) 7225 19 10 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, hot-rolled 3,540 N/A 3,540 3,894 4,248 4,602 (C) 7225 19 90 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, cold-rolled "cold-reduced", non-grain-oriented 3,590 N/A 3,590 3,949 4,308 4,667 (F) 7225 30 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, in coils (excl. products of silicon-electrical steel) 3,540 N/A 3,540 3,894 4,248 4,602 (F) 7225 40 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, not in coils (excl. products of silicon-electrical steel) 3,540 N/A 3,540 3,894 4,248 4,602 (F) 7225 50 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of silicon-electrical steel) 3,590 N/A 3,590 3,949 4,308 4,667 (F) 7225 91 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and electrolytically plated or coated with zinc (excl. products of silicon-electrical steel) 3,590 N/A 3,590 3,949 4,308 4,667 (F) 7225 92 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and plated or coated with zinc (excl. electrolytically plated or coated and products of silicon-electrical steel) 3,590 N/A 3,590 3,949 4,308 4,667 (F) 7225 99 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. plated or coated with zinc and products of silicon-electrical steel) 3,590 N/A 3,590 3,949 4,308 4,667 (F) 7226 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" see below N/A see below see below see below see below   7226 11 00 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", grain-oriented 4,650 N/A 4,650 5,115 5,580 6,045 (C) 7226 19 10 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, not further worked than hot-rolled 3,540 N/A 3,540 3,894 4,248 4,602 (C) 7226 19 80 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, cold-rolled "cold-reduced", whether or not further worked, or hot-rolled and further worked, non-grain-oriented 3,590 N/A 3,590 3,949 4,308 4,667 (F) 7226 20 00 Flat-rolled products of high-speed steel, of a width of <= 600 mm, hot-rolled or cold-rolled "cold-reduced" 3,540 N/A 3,540 3,894 4,248 4,602 (F) 7226 91 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than hot-rolled (excl. products of high-speed steel or silicon-electrical steel) 3,540 N/A 3,540 3,894 4,248 4,602 (F) 7226 92 00 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of high-speed steel or silicon-electrical steel) 3,590 N/A 3,590 3,949 4,308 4,667 (F) 7226 99 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. products of high-speed steel or silicon-electrical steel) 3,590 N/A 3,590 3,949 4,308 4,667 (F) 7227 Bars and rods of alloy steel other than stainless, hot-rolled, in irregularly wound coils 3,420 N/A 3,420 3,762 4,104 4,446 (C)/(F) 7228 Other bars and rods of alloy steel other than stainless, angles, shapes and sections of alloy steel other than stainless, n.e.s.; hollow drill bars and rods, of alloy or non-alloy steel see below N/A see below see below see below see below   7228 10 20 Bars and rods of high-speed steel, not further worked than hot-rolled, hot-drawn or extruded, and hot-rolled, hot-drawn or extruded, not further worked than clad (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,420 N/A 3,420 3,762 4,104 4,446 (F) 7228 10 50 Bars and rods of high-speed steel, forged (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,420 N/A 3,420 3,762 4,104 4,446 (F) 7228 10 90 Bars and rods of high-speed steel, not further worked than cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked (excl. forged products, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,420 N/A 3,420 3,762 4,104 4,446 (F) 7228 20 Bars and rods of silico-manganese steel (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,420 N/A 3,420 3,762 4,104 4,446 (F) 7228 30 Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,420 N/A 3,420 3,762 4,104 4,446 (C)/(F) 7228 40 Bars and rods of alloy steel other than stainless, not further worked than forged (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,420 N/A 3,420 3,762 4,104 4,446 (F) 7228 50 Bars and rods of alloy steel other than stainless, not further worked than cold-formed or cold-finished (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,420 N/A 3,420 3,762 4,104 4,446 (C)/(F) 7228 60 Bars and rods of alloy steel other than stainless, cold-formed or cold-finished and further worked or hot-formed and further worked, n.e.s. (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,420 N/A 3,420 3,762 4,104 4,446 (F) 7228 70 Angles, shapes and sections of alloy steel other than stainless, n.e.s. 3,420 N/A 3,420 3,762 4,104 4,446 (F) 7228 80 00 Hollow drill bars and rods, of alloy or non-alloy steel 3,420 N/A 3,420 3,762 4,104 4,446 (F) 7229 Wire of alloy steel other than stainless, in coils (excl. bars and rods) 3,420 N/A 3,420 3,762 4,104 4,446 (C)/(F) 7301 Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel 2,543 N/A 2,543 2,797 3,052 3,306 (C) 7302 Railway or tramway track construction material of iron or steel, the following : rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers "cross-ties", fish-plates, chairs, chair wedges, sole plates "base plates", rail clips, bedplates, ties and other material specialised for jointing or fixing rails 3,213 N/A 3,213 3,534 3,856 4,177 (C) 7303 Tubes, pipes and hollow profiles, of cast iron see below N/A see below see below see below see below   7303 00 Tubes, pipes and hollow profiles, of cast iron 2,183 N/A 2,183 2,401 2,620 2,838   7304 Tubes, pipes and hollow profiles, seamless, of iron or steel (excl. products of cast iron) see below N/A see below see below see below see below   7304 11 00 Line pipe of a kind used for oil or gas pipelines, seamless, of stainless steel 3,563 N/A 3,563 3,919 4,276 4,632   7304 19 Line pipe of a kind used for oil or gas pipelines, seamless, of iron or steel (excl. products of stainless steel or of cast iron) 2,596 N/A 2,596 2,856 3,116 3,375 (C) 7304 22 00 Drill pipe, seamless, of stainless steel, of a kind used in drilling for oil or gas 3,563 N/A 3,563 3,919 4,276 4,632   7304 23 00 Drill pipe, seamless, of a kind used in drilling for oil or gas, of iron or steel (excl. products of stainless steel or of cast iron) 2,596 N/A 2,596 2,856 3,116 3,375 (C) 7304 24 00 Casing and tubing, seamless, of a kind used for drilling for oil or gas, of stainless steel 3,563 N/A 3,563 3,919 4,276 4,632   7304 29 Casing and tubing, seamless, of iron or steel, of a kind used in drilling for oil or gas (excl. products of cast iron) 2,596 N/A 2,596 2,856 3,116 3,375 (C) 7304 31 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" (excl. cast iron products and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used for drilling for oil or gas) 2,596 N/A 2,596 2,856 3,116 3,375 (C) 7304 39 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, not cold-drawn or cold-rolled "cold-reduced" (excl. cast iron products, line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas) 2,596 N/A 2,596 2,856 3,116 3,375 (C) 7304 41 00 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas) 3,563 N/A 3,563 3,919 4,276 4,632   7304 49 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines or of a kind used for drilling for oil or gas) 3,563 N/A 3,563 3,919 4,276 4,632   7304 51 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil) 2,596 N/A 2,596 2,856 3,116 3,375 (F) 7304 59 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil) 2,596 N/A 2,596 2,856 3,116 3,375 (C)/(F) 7304 90 00 Tubes, pipes and hollow profiles, seamless, of non-circular cross-section, of iron or steel (excl. products of cast iron) 2,596 N/A 2,596 2,856 3,116 3,375 (C) 7305 Tubes and pipes, having circular cross-sections and an external diameter of > 406,4 mm, of flat-rolled products of iron or steel "e.g., welded, riveted or similarly closed" 2,543 N/A 2,543 2,797 3,052 3,306 (C) 7306 Tubes, pipes and hollow profiles "e.g., open seam or welded, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless tubes and pipes and tubes having internal and external circular cross-sections and an external diameter of > 406,4 mm) see below N/A see below see below see below see below   7306 11 00 Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm 3,733 N/A 3,733 4,106 4,480 4,853   7306 19 00 Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron) 2,371 N/A 2,371 2,608 2,845 3,082 (C) 7306 21 00 Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm 3,733 N/A 3,733 4,106 4,480 4,853   7306 29 00 Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron) 2,371 N/A 2,371 2,608 2,845 3,082 (C) 7306 30 12 Precision tubes, welded, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" 2,371 N/A 2,371 2,608 2,845 3,082 (C) 7306 30 18 Precision tubes, welded, of circular cross-section, of iron or non-alloy steel (excl. cold-drawn or cold-rolled) 2,371 N/A 2,371 2,608 2,845 3,082   7306 30 41 Threaded or threadable tubes "gas pipe", welded, of circular cross-section, of iron or non-alloy steel, plated or coated with zinc 2,371 N/A 2,371 2,608 2,845 3,082 (C) 7306 30 49 Threaded or threadable tubes "gas pipe", welded, of circular cross-section, of iron or non-alloy steel (excl. products plated or coated with zinc) 2,371 N/A 2,371 2,608 2,845 3,082 (C) 7306 30 72 Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel, of an external diameter of <= 168,3 mm, plated or coated with zinc (excl. line pipe of a kind used for oil or gas pipelines or casing and tubingof a kind used in drilling for oil or gas) 2,371 N/A 2,371 2,608 2,845 3,082 (C) 7306 30 77 Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel of an external diameter of <= 168,3 mm (excl. plated or coated with zinc and line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used in drilling for oil or gas, precision tubes and threaded or threadable tubes "gas pipe") 2,371 N/A 2,371 2,608 2,845 3,082 (C) 7306 30 80 Tubes, pipes and hollow profiles, welded, having a circular cross-section, of iron or steel, of an external diameter of > 168,3 mm but <= 406,4 mm (excl. line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, or precision steel tubes, electrical conduit tubes or threaded or threadable tubes "gas pipe") 2,371 N/A 2,371 2,608 2,845 3,082 (C) 7306 40 20 Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. products having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) 3,733 N/A 3,733 4,106 4,480 4,853   7306 40 80 Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel (excl. products cold-drawn or cold-rolled "cold-reduced", tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) 3,683 N/A 3,683 4,051 4,420 4,788   7306 50 21 Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" 2,371 N/A 2,371 2,608 2,845 3,082 (F) 7306 50 29 Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless (excl. cold-drawn or cold-rolled) 2,371 N/A 2,371 2,608 2,845 3,082 (F) 7306 50 80 Tubes, pipes and hollow profiles, welded, of circular cross-section, of alloy steel other than stainless (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and precision steel tubes) 2,371 N/A 2,371 2,608 2,845 3,082 (F) 7306 61 10 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel 3,733 N/A 3,733 4,106 4,480 4,853   7306 61 92 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of <= 2 mm 2,371 N/A 2,371 2,608 2,845 3,082 (C) 7306 61 99 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of > 2 mm 2,371 N/A 2,371 2,608 2,845 3,082 (C) 7306 69 10 Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) 3,733 N/A 3,733 4,106 4,480 4,853   7306 69 90 Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of iron or steel other than stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) 2,371 N/A 2,371 2,608 2,845 3,082 (C) 7306 90 00 Tubes, pipes and hollow profiles "e.g., open seam, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless or welded tubes and pipes and tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm) 2,371 N/A 2,371 2,608 2,845 3,082 (C) 7307 Tube or pipe fittings "e.g. couplings, elbows, sleeves", of iron or steel see below N/A see below see below see below see below   7307 11 Tube or pipe fittings of non-malleable cast iron 2,173 N/A 2,173 2,390 2,608 2,825   7307 19 10 Tube or pipe fittings of cast iron (excl. of non-malleable) 2,173 N/A 2,173 2,390 2,608 2,825   7307 19 90 Cast tube or pipe fittings of steel 2,423 N/A 2,423 2,665 2,908 3,150 (C) 7307 21 00 Flanges of stainless steel (excl. cast products) 3,223 N/A 3,223 3,545 3,868 4,190   7307 22 Threaded elbows, bends and sleeves of stainless steel (excl. cast products) 3,223 N/A 3,223 3,545 3,868 4,190   7307 23 Butt welding tube or pipe fittings of stainless steel (excl. cast products) 3,223 N/A 3,223 3,545 3,868 4,190   7307 29 Tube or pipe fittings of stainless steel (excl. cast products, flanges, threaded elbows, bends and sleeves and butt weldings fittings) 3,223 N/A 3,223 3,545 3,868 4,190   7307 91 00 Flanges of iron or steel (excl. cast or stainless products) 2,423 N/A 2,423 2,665 2,908 3,150 (C) 7307 92 Threaded elbows, bends and sleeves, of stainless steel (excl. cast or stainless products) 2,423 N/A 2,423 2,665 2,908 3,150 (C) 7307 93 Butt welding fittings of iron or steel (excl. cast iron or stainless steel products, and flanges) 2,423 N/A 2,423 2,665 2,908 3,150 (C) 7307 99 Tube or pipe fittings, of iron or steel (excl. cast iron or stainless steel products; flanges; threaded elbows, bends and sleeves; butt welding fittings) 2,423 N/A 2,423 2,665 2,908 3,150 (C) 7308 Structures and parts of structures "e.g., bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns", of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel (excl. prefabricated buildings of heading 9406) 3,413 N/A 3,413 3,754 4,096 4,437 (C) 7309 Reservoirs, tanks, vats and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of > 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated (excl. containers specifically constructed or equipped for one or more types of transport) 3,663 N/A 3,663 4,029 4,396 4,762 (C) 7310 Tanks, casks, drums, cans, boxes and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of <= 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated, n.e.s. 2,543 N/A 2,543 2,797 3,052 3,306 (C) 7311 Containers of iron or steel, for compressed or liquefied gas (excl. containers specifically constructed or equipped for one or more types of transport) see below N/A see below see below see below see below   7311 00 Containers of iron or steel, for compressed or liquefied gas (excl. containers specifically constructed or equipped for one or more types of transport) 3,543 N/A 3,543 3,897 4,252 4,606 (C) 7318 Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers, incl. spring washers, and similar articles, of iron or steel (excl. lag screws, stoppers, plugs and the like, threaded) see below N/A see below see below see below see below   7318 11 00 Coach screws of iron or steel 2,423 N/A 2,423 2,665 2,908 3,150 (C) 7318 12 10 Wood screws of stainless steel (excl. coach screws) 3,563 N/A 3,563 3,919 4,276 4,632 (C) 7318 12 90 Wood screws of iron or steel other than stainless (excl. coach screws) 2,423 N/A 2,423 2,665 2,908 3,150 (C) 7318 13 00 Screw hooks and screw rings, of iron or steel 2,423 N/A 2,423 2,665 2,908 3,150 (C) 7318 14 10 Self-tapping screws, of stainless steel (excl. wood screws) 3,563 N/A 3,563 3,919 4,276 4,632 (C) 7318 14 91 Spaced-thread screws of iron or steel other than stainless 2,423 N/A 2,423 2,665 2,908 3,150 (C) 7318 14 99 Self-tapping screws of iron or steel other than stainless (excl. spaced-thread screws and wood screws) 2,423 N/A 2,423 2,665 2,908 3,150 (C) 7318 15 Threaded screws and bolts, of iron or steel, whether or not with their nuts and washers (excl. coach screws and other wood screws, screw hooks and screw rings, self-tapping screws, lag screws, stoppers, plugs and the like, threaded) 3,153 N/A 3,153 3,468 3,784 4,099 (C) 7318 16 Nuts of iron or steel 3,443 N/A 3,443 3,787 4,132 4,476 (C) 7318 19 00 Threaded articles, of iron or steel, n.e.s. 2,423 N/A 2,423 2,665 2,908 3,150 (C) 7318 21 00 Spring washers and other lock washers, of iron or steel 2,423 N/A 2,423 2,665 2,908 3,150 (C) 7318 22 00 Washers of iron or steel (excl. spring washers and other lock washers) 2,633 N/A 2,633 2,896 3,160 3,423 (C) 7318 23 00 Rivets of iron or steel (excl. tubular and bifurcated rivets for particular uses) 2,563 N/A 2,563 2,819 3,076 3,332 (C) 7318 24 00 Cotters and cotter pins, of iron or steel 2,423 N/A 2,423 2,665 2,908 3,150 (C) 7318 29 00 Non-threaded articles, of iron or steel 2,423 N/A 2,423 2,665 2,908 3,150 (C) 7326 Articles of iron or steel, n.e.s. (excl. cast articles) see below N/A see below see below see below see below   7326 11 00 Grinding balls and similar articles for mills, of iron or steel, forged or stamped, but not further worked 2,423 N/A 2,423 2,665 2,908 3,150 (C) 7326 19 Articles of iron or steel, forged or stamped, but not further worked, n.e.s. (excl. grinding balls and similar articles for mills) 2,423 N/A 2,423 2,665 2,908 3,150 (C) 7326 20 00 Articles of iron or steel wire, n.e.s. 2,423 N/A 2,423 2,665 2,908 3,150 (C) 7326 90 30 Ladders and steps, of iron or steel 2,423 N/A 2,423 2,665 2,908 3,150 (C) 7326 90 40 Pallets and similar platforms for handling goods, of iron or steel 2,423 N/A 2,423 2,665 2,908 3,150 (C) 7326 90 50 Reels for cables, piping and the like, of iron or steel 2,423 N/A 2,423 2,665 2,908 3,150 (C) 7326 90 60 Ventilators, non-mechanical, guttering, hooks and like articles used in the building industry, n.e.s., of iron or steel 2,423 N/A 2,423 2,665 2,908 3,150 (C) 7326 90 92 Articles of iron or steel, open-die forged, n.e.s. 2,423 N/A 2,423 2,665 2,908 3,150 (C) 7326 90 94 Articles of iron or steel, closed-die forged, n.e.s. 2,423 N/A 2,423 2,665 2,908 3,150 (C) 7326 90 96 Sintered articles of iron or steel, n.e.s. 2,423 N/A 2,423 2,665 2,908 3,150 (C) 7326 90 98 Articles of iron or steel, n.e.s. 2,543 N/A 2,543 2,797 3,052 3,306 (C) United Arab Emirates Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – – – –   2523 10 00 White clinker 1,290 0,050 1,340 1,474 1,608 1,742 (B) 2523 10 00 Grey clinker 0,830 0,040 0,860 0,946 1,032 1,118 (A) 2523 21 00 White Portland cement 1,300 0,140 1,440 1,584 1,728 1,872   2523 29 00 Grey Portland cement 0,840 0,070 0,900 0,990 1,080 1,170   2523 90 00 White hydraulic cements 1,330 0,170 1,510 1,661 1,812 1,963 (B) 2523 90 00 Grey hydraulic cements 0,800 0,070 0,870 0,957 1,044 1,131 (A) 2523 30 00 Aluminous cement – – – – – –   Aluminium         10 % mark-up 20 % mark-up 30 % mark-up   7601 Unwrought aluminium 1,870 N/A 1,870 2,057 2,244 2,431 (K) 7603 Aluminium powders and flakes 1,980 N/A 1,980 2,178 2,376 2,574 (K) 7604 10 10 Bars and rods 2,200 N/A 2,200 2,420 2,640 2,860 (K) 7604 10 90 Profiles 2,220 N/A 2,220 2,442 2,664 2,886 (K) 7604 21 00 Hollow profiles 2,220 N/A 2,220 2,442 2,664 2,886 (K) 7604 29 10 Bars and rods 2,200 N/A 2,200 2,420 2,640 2,860 (K) 7604 29 90 Profiles 2,220 N/A 2,220 2,442 2,664 2,886 (K) 7605 Aluminium wire 2,200 N/A 2,200 2,420 2,640 2,860 (K) 7606 Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm 2,660 N/A 2,660 2,926 3,192 3,458 (K) 7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm 2,660 N/A 2,660 2,926 3,192 3,458 (K) 7608 Aluminium tubes and pipes 2,220 N/A 2,220 2,442 2,664 2,886 (K) 7609 00 00 Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) 2,220 N/A 2,220 2,442 2,664 2,886 (K) 7610 10 00 Doors, windows and their frames and thresholds for doors 2,220 N/A 2,220 2,442 2,664 2,886 (K) 7610 90 Other 2,220 N/A 2,220 2,442 2,664 2,886 (K) 7610 90 10 Bridges and bridge-sections, towers and lattice masts 2,220 N/A 2,220 2,442 2,664 2,886 (K) 7610 90 90 Other 2,220 N/A 2,220 2,442 2,664 2,886 (K) 7611 00 00 Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 2,660 N/A 2,660 2,926 3,192 3,458 (K) 7612 Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 2,660 N/A 2,660 2,926 3,192 3,458 (K) 7613 00 00 Aluminium containers for compressed or liquefied gas 2,660 N/A 2,660 2,926 3,192 3,458 (K) 7614 Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated 2,200 N/A 2,200 2,420 2,640 2,860 (K) 7616 10 00 Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles 2,660 N/A 2,660 2,926 3,192 3,458 (K) 7616 91 00 Cloth, grill, netting and fencing, of aluminium wire 2,660 N/A 2,660 2,926 3,192 3,458 (K) 7616 99 10 Cast 1,980 N/A 1,980 2,178 2,376 2,574 (K) 7616 99 90 Other 2,660 N/A 2,660 2,926 3,192 3,458 (K) Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066   Iron and steel         10 % mark-up 20 % mark-up 30 % mark-up   7202 11 Ferro-manganese, containing by weight > 2% of carbon 1,690 N/A 1,690 1,859 2,028 2,197   7202 19 Ferro-manganese, containing by weight <= 2% carbon _ _ _ _ _ _   7202 41 Ferro-chromium, containing by weight > 4% of carbon 2,350 N/A 2,350 2,585 2,820 3,055   7202 49 Ferro-chromium, containing by weight <= 4% of carbon _ _ _ _ _ _   7202 60 00 Ferro-nickel 3,480 N/A 3,480 3,828 4,176 4,524   United Kingdom Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – – – –   2523 10 00 White clinker – – – – – –   2523 10 00 Grey clinker 0,930 0,020 0,950 1,045 1,140 1,235 (A) 2523 21 00 White Portland cement – – – – – –   2523 29 00 Grey Portland cement 0,940 0,040 0,980 1,078 1,176 1,274   2523 90 00 White hydraulic cements – – – – – –   2523 90 00 Grey hydraulic cements 0,900 0,050 0,940 1,034 1,128 1,222 (A) 2523 30 00 Aluminous cement – – – – – –   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 0,720 0,030 0,750 0,758 0,758 0,758   2814 10 00 Anhydrous ammonia 1,970 0,090 2,050 2,071 2,071 2,071   2814 20 00 Ammonia in aqueous solution 0,590 0,030 0,620 0,626 0,626 0,626   2834 21 00 Nitrate of potassium 0,830 0,040 0,870 0,879 0,879 0,879   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,400 0,020 0,420 0,424 0,424 0,424   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,650 0,020 0,680 0,687 0,687 0,687   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,190 0,070 1,260 1,273 1,273 1,273   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,160 0,060 1,230 1,242 1,242 1,242   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,550 0,050 0,590 0,596 0,596 0,596   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 0,720 0,050 0,780 0,788 0,788 0,788   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 0,640 0,040 0,680 0,687 0,687 0,687   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,980 0,060 1,050 1,061 1,061 1,061   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,840 0,060 0,900 0,909 0,909 0,909   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,840 0,060 0,900 0,909 0,909 0,909   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,130 0,040 1,170 1,182 1,182 1,182   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,830 0,060 0,880 0,889 0,889 0,889   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 0,820 0,050 0,870 0,879 0,879 0,879   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 0,980 0,060 1,040 1,050 1,050 1,050   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,450 0,050 0,500 0,505 0,505 0,505   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,450 0,060 0,510 0,515 0,515 0,515   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,310 0,040 0,350 0,354 0,354 0,354   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,460 0,040 0,490 0,495 0,495 0,495   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammoniumhydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,290 0,030 0,320 0,323 0,323 0,323   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 0,600 0,070 0,670 0,677 0,677 0,677   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,510 0,070 0,570 0,576 0,576 0,576   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,590 0,040 0,630 0,636 0,636 0,636   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,310 0,030 0,340 0,343 0,343 0,343   Aluminium         10 % mark-up 20 % mark-up 30 % mark-up   7601 Unwrought aluminium 1,870 N/A 1,870 2,057 2,244 2,431 (K) 7603 Aluminium powders and flakes 1,930 N/A 1,930 2,123 2,316 2,509 (K) 7604 10 10 Bars and rods 2,150 N/A 2,150 2,365 2,580 2,795 (K) 7604 10 90 Profiles 2,170 N/A 2,170 2,387 2,604 2,821 (K) 7604 21 00 Hollow profiles 2,170 N/A 2,170 2,387 2,604 2,821 (K) 7604 29 10 Bars and rods 2,150 N/A 2,150 2,365 2,580 2,795 (K) 7604 29 90 Profiles 2,170 N/A 2,170 2,387 2,604 2,821 (K) 7605 Aluminium wire 2,150 N/A 2,150 2,365 2,580 2,795 (K) 7606 Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm 2,610 N/A 2,610 2,871 3,132 3,393 (K) 7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm 2,610 N/A 2,610 2,871 3,132 3,393 (K) 7608 Aluminium tubes and pipes 2,170 N/A 2,170 2,387 2,604 2,821 (K) 7609 00 00 Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) 2,170 N/A 2,170 2,387 2,604 2,821 (K) 7610 10 00 Doors, windows and their frames and thresholds for doors 2,170 N/A 2,170 2,387 2,604 2,821 (K) 7610 90 Other 2,170 N/A 2,170 2,387 2,604 2,821 (K) 7610 90 10 Bridges and bridge-sections, towers and lattice masts 2,170 N/A 2,170 2,387 2,604 2,821 (K) 7610 90 90 Other 2,170 N/A 2,170 2,387 2,604 2,821 (K) 7611 00 00 Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 2,610 N/A 2,610 2,871 3,132 3,393 (K) 7612 Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 2,610 N/A 2,610 2,871 3,132 3,393 (K) 7613 00 00 Aluminium containers for compressed or liquefied gas 2,610 N/A 2,610 2,871 3,132 3,393 (K) 7614 Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated 2,150 N/A 2,150 2,365 2,580 2,795 (K) 7616 10 00 Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles 2,610 N/A 2,610 2,871 3,132 3,393 (K) 7616 91 00 Cloth, grill, netting and fencing, of aluminium wire 2,610 N/A 2,610 2,871 3,132 3,393 (K) 7616 99 10 Cast 1,930 N/A 1,930 2,123 2,316 2,509 (K) 7616 99 90 Other 2,610 N/A 2,610 2,871 3,132 3,393 (K) Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066   Iron and steel         10 % mark-up 20 % mark-up 30 % mark-up   2601 12 00 Agglomerated iron ores and concentrates (excl. roasted iron pyrites) 0,270 0,010 0,280 0,308 0,336 0,364   7201 Pig iron and spiegeleisen, in pigs, blocks or other primary forms 2,170 N/A 2,170 2,387 2,604 2,821   7202 11 Ferro-manganese, containing by weight > 2% of carbon 1,690 N/A 1,690 1,859 2,028 2,197   7202 19 Ferro-manganese, containing by weight <= 2% carbon – N/A – – – –   7202 41 Ferro-chromium, containing by weight > 4% of carbon 2,350 N/A 2,350 2,585 2,820 3,055   7202 49 Ferro-chromium, containing by weight <= 4% of carbon – N/A – – – –   7202 60 00 Ferro-nickel 3,480 N/A 3,480 3,828 4,176 4,524   7203 Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99,94%, in lumps, pellets or similar forms – N/A – – – –   7205 Granules and powders of pig iron, spiegeleisen, iron or steel (excl. granules and powders of ferro-alloys, turnings and filings of iron or steel, radioactive iron powders "isotopes" and certain low-calibre, substandard balls for ballbearings) 2,220 N/A 2,220 2,442 2,664 2,886 (C) 7206 Iron and non-alloy steel in ingots or other primary forms (excl. remelting scrap ingots, products obtained by continuous casting and iron of heading 7203) see below N/A see below see below see below see below   7206 10 00 Ingots, of iron and non-alloy steel (excl. remelted scrap ingots, continuous cast products, iron of heading 7203) 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7206 90 00 Iron and non-alloy steel, in puddled bars or other primary forms (excl. ingots, remelted scrap ingots, continuous cast products, iron of heading 7203) 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7207 Semi-finished products of iron or non-alloy steel see below N/A see below see below see below see below   7207 11 11 Semi-finished products, of non-alloy free-cutting steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7207 11 14 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness of <= 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel) 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7207 11 16 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness of > 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel) 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7207 11 90 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular cross-section, the width < twice the thickness, forged 3,040 N/A 3,040 3,344 3,648 3,952 (C) 7207 12 10 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtained by continuous casting 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7207 12 90 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular "other than square" cross-section, the width >= twice the thickness, forged 3,040 N/A 3,040 3,344 3,648 3,952 (C) 7207 19 12 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7207 19 19 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, forged 3,040 N/A 3,040 3,344 3,648 3,952 (C) 7207 19 80 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon (excl. semi-products, of square, rectangular, circular or polygonal cross-section) 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7207 20 11 Semi-finished products, of non-alloy free-cutting steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7207 20 15 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% but < 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel) 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7207 20 17 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel) 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7207 20 19 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, forged 3,040 N/A 3,040 3,344 3,648 3,952 (C) 7207 20 32 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtained by continuous casting 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7207 20 39 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of rectangular "other than square" cross-section and the width >= twice the thickness, forged 3,040 N/A 3,040 3,344 3,648 3,952 (C) 7207 20 52 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7207 20 59 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of circular or polygonal cross-section, forged 3,040 N/A 3,040 3,344 3,648 3,952 (C) 7207 20 80 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon (excl. those of square, rectangular, circular or polygonal cross-section) 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7208 Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled, not clad, plated or coated 2,420 N/A 2,420 2,662 2,904 3,146 (C) 7209 Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, cold-rolled "cold-reduced", not clad, plated or coated 2,500 N/A 2,500 2,750 3 3,250 (C) 7210 Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated 2,500 N/A 2,500 2,750 3 3,250 (C) 7211 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", not clad, plated or coated see below N/A see below see below see below see below   7211 13 00 Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as "wide flats" 2,420 N/A 2,420 2,662 2,904 3,146 (C) 7211 14 00 Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, not further worked than hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm (excl. "wide flats") 2,420 N/A 2,420 2,662 2,904 3,146 (C) 7211 19 00 Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, simply hot-rolled, not clad, plated or coated, of a thickness < 4,75 mm (excl. "wide flats") 2,420 N/A 2,420 2,662 2,904 3,146 (C) 7211 23 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight < 0,25% of carbon 2,500 N/A 2,500 2,750 3 3,250 (C) 7211 29 00 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight >= 0,25% of carbon 2,500 N/A 2,500 2,750 3 3,250 (C) 7211 90 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked, but not clad, plated or coated 2,500 N/A 2,500 2,750 3 3,250 (C) 7212 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated 2,500 N/A 2,500 2,750 3 3,250 (C) 7213 Bars and rods of iron or non-alloy steel, hot-rolled, in irregularly wound coils 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7214 Bars and rods, of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but incl. those twisted after rolling (excl. in irregularly wound coils) see below N/A see below see below see below see below   7214 10 00 Bars and rods, of iron or non-alloy steel, not further worked than forged (excl. in irregularly wound coils) 3,040 N/A 3,040 3,344 3,648 3,952 (C) 7214 20 00 Bars and rods, of iron or non-alloy steel, with indentations, ribs, groves or other deformations produced during the rolling process 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7214 30 00 Bars and rods, of non-alloy free-cutting steel, not further worked than hot-rolled, hot-drawn or hot-extruded (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling) 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7214 91 Bars and rods, of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, of rectangular "other than square" cross-section (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process, bars and rods twisted after rolling and free-cutting steel) 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7214 99 Bars and rods, of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded (excl. of rectangular [other than square] cross-section and those containing indentations, ribs, grooves or other deformations produced during the rolling process, and of non-alloy free-cutting steel) 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7215 Bars and rods, of iron or non-alloy steel, cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked, n.e.s. 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7216 Angles, shapes and sections of iron or non-alloy steel, n.e.s. 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7217 Wire of iron or non-alloy steel, in coils (excl. bars and rods) see below N/A see below see below see below see below   7217 10 Wire of iron or non-alloy steel, in coils, not plated or coated, whether or not polished (excl. bars and rods) 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7217 20 Wire of iron or non-alloy steel, in coils, plated or coated with zinc (excl. bars and rods) 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7217 30 Wire of iron or non-alloy steel, in coils, plated or coated with base metals (excl. plated or coated with zinc, and bars and rods) 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7217 90 Wire of iron or non-alloy steel, in coils, plated or coated (excl. plated or coated with base metals, and bars and rods) 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7218 Stainless steel in ingots or other primary forms (excl. remelting scrap ingots and products obtained by continuous casting); semi-finished products of stainless steel see below N/A see below see below see below see below   7218 10 00 Steel, stainless, in ingots and other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) 3,840 N/A 3,840 4,224 4,608 4,992   7218 91 Semi-finished products of stainless steel, of rectangular "other than square" cross-section 3,290 N/A 3,290 3,619 3,948 4,277   7218 99 11 Semi-finished products of stainless steel, of square cross-section, rolled or obtained by continuous casting 3,290 N/A 3,290 3,619 3,948 4,277   7218 99 19 Semi-finished products of stainless steel, of square cross-section, forged 3,840 N/A 3,840 4,224 4,608 4,992   7218 99 20 Semi-finished products of stainless steel, of circular cross-section or of cross-section other than square or rectangular, rolled or obtained by continuous casting 3,290 N/A 3,290 3,619 3,948 4,277   7218 99 80 Semi-finished products of stainless steel, forged (excl. products of square or rectangular cross-section) 3,840 N/A 3,840 4,224 4,608 4,992   7219 Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" see below N/A see below see below see below see below   7219 11 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of > 10 mm 3,290 N/A 3,290 3,619 3,948 4,277   7219 12 Flat-rolled products of stainless steel, of a width of>= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 4,7 mm and <= 10 mm 3,290 N/A 3,290 3,619 3,948 4,277   7219 13 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 3 mm and < 4,75 mm 3,290 N/A 3,290 3,619 3,948 4,277   7219 14 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of < 3 mm 3,290 N/A 3,290 3,619 3,948 4,277   7219 21 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of > 10 mm 3,290 N/A 3,290 3,619 3,948 4,277   7219 22 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 4,75 mm and <= 10 mm 3,290 N/A 3,290 3,619 3,948 4,277   7219 23 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 3 mm and < 4,75 mm 3,290 N/A 3,290 3,619 3,948 4,277   7219 24 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of < 3 mm 3,290 N/A 3,290 3,619 3,948 4,277   7219 31 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 4,75 mm 3,370 N/A 3,370 3,707 4,044 4,381   7219 32 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 3 mm but < 4,75 mm 3,370 N/A 3,370 3,707 4,044 4,381   7219 33 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of > 1 mm but < 3 mm 3,370 N/A 3,370 3,707 4,044 4,381   7219 34 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 0,5 mm but <= 1 mm 3,370 N/A 3,370 3,707 4,044 4,381   7219 35 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of < 0,5 mm 3,370 N/A 3,370 3,707 4,044 4,381   7219 90 Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked 3,370 N/A 3,370 3,707 4,044 4,381   7220 Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" see below N/A see below – – –   7220 11 00 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of >= 4,75 mm 3,290 N/A 3,290 3,619 3,948 4,277   7220 12 00 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of < 4,75 mm 3,290 N/A 3,290 3,619 3,948 4,277   7220 20 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" 3,370 N/A 3,370 3,707 4,044 4,381   7220 90 Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked 3,370 N/A 3,370 3,707 4,044 4,381   7221 Bars and rods of stainless steel, hot-rolled, in irregularly wound coils 3,110 N/A 3,110 3,421 3,732 4,043   7222 Other bars and rods of stainless steel; angles, shapes and sections of stainless steel, n.e.s. see below N/A see below see below see below see below   7222 11 Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only hot-extruded, of circular cross-section 3,110 N/A 3,110 3,421 3,732 4,043   7222 19 Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only extruded (excl. of circular cross-section) 3,110 N/A 3,110 3,421 3,732 4,043   7222 20 Other bars and rods of stainless steel, not further worked than cold-formed or cold-finished 3,110 N/A 3,110 3,421 3,732 4,043   7222 30 Other bars and rods of stainless steel, cold-formed or cold-finished and further worked, or not further worked than forged, or forged, or hot-formed by other means and further worked, n.e.s. 3,840 N/A 3,840 4,224 4,608 4,992   7222 40 Angles, shapes and sections of stainless steel, n.e.s. 3,110 N/A 3,110 3,421 3,732 4,043   7223 Wire of stainless steel, in coils (excl. bars and rods) see below N/A see below see below see below see below   7223 00 Wire of stainless steel, in coils (excl. bars and rods) 3,110 N/A 3,110 3,421 3,732 4,043   7224 Steel, alloy, other than stainless, in ingots or other primary forms, semi-finished products of alloy steel other than stainless (excl. waste and scrap in ingot form, and products obtained by continuous casting) see below N/A see below see below see below see below   7224 10 Steel, alloy, other than stainless, in ingots or other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) 4,170 N/A 4,170 4,587 5,004 5,421 (F) 7224 90 02 Semi-finished products of tool steel 3,620 N/A 3,620 3,982 4,344 4,706 (F) 7224 90 03 Semi-finished products of high-speed steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting the width measuring < twice the thickness 3,620 N/A 3,620 3,982 4,344 4,706 (F) 7224 90 05 Semi-finished products of steel containing by weight <= 0,7% of carbon, 0,5% to 1,2% of manganese, 0,6% to 2,3% of silicon, or of steel containing by weight >= 0,0008% of boron with any other element < the minimum content referred to in Note 1 f to chapter 72, of square or rectangular cross-section, hot rolled or obtained by continuous casting, the width measuring < twice the thickness 3,620 N/A 3,620 3,982 4,344 4,706 (F) 7224 90 07 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring < twice the thickness (excl. of tool steel, high-speed steel and articles of subheading 7224.90.05) 3,620 N/A 3,620 3,982 4,344 4,706 (F) 7224 90 14 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring >= twice the thickness (excl. of tool steel) 3,620 N/A 3,620 3,982 4,344 4,706 (F) 7224 90 18 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, forged (excl. of tool steel) 4,170 N/A 4,170 4,587 5,004 5,421 (F) 7224 90 31 Semi-finished products of steel containing by weight 0,9% to 1,15% carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting 3,620 N/A 3,620 3,982 4,344 4,706 (F) 7224 90 38 Semi-finished products of alloy steel, other than stainless steel, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting (excl. of tool steel and products containing by weight 0,9% to 1,15% of carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum) 3,620 N/A 3,620 3,982 4,344 4,706 (F) 7224 90 90 Semi-finished products of alloy steel, other than stainless steel, forged (excl. of tool steel and products of square or rectangular, circular or polygamol cross-section) 4,170 N/A 4,170 4,587 5,004 5,421 (F) 7225 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" see below N/A see below see below see below see below   7225 11 00 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, grain-oriented 4,740 N/A 4,740 5,214 5,688 6,162 (C) 7225 19 10 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, hot-rolled 3,620 N/A 3,620 3,982 4,344 4,706 (C) 7225 19 90 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, cold-rolled "cold-reduced", non-grain-oriented 3,700 N/A 3,700 4,070 4,440 4,810 (F) 7225 30 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, in coils (excl. products of silicon-electrical steel) 3,620 N/A 3,620 3,982 4,344 4,706 (F) 7225 40 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, not in coils (excl. products of silicon-electrical steel) 3,620 N/A 3,620 3,982 4,344 4,706 (F) 7225 50 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of silicon-electrical steel) 3,700 N/A 3,700 4,070 4,440 4,810 (F) 7225 91 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and electrolytically plated or coated with zinc (excl. products of silicon-electrical steel) 3,700 N/A 3,700 4,070 4,440 4,810 (F) 7225 92 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and plated or coated with zinc (excl. electrolytically plated or coated and products of silicon-electrical steel) 3,700 N/A 3,700 4,070 4,440 4,810 (F) 7225 99 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. plated or coated with zinc and products of silicon-electrical steel) 3,700 N/A 3,700 4,070 4,440 4,810 (F) 7226 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" see below N/A see below see below see below see below   7226 11 00 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", grain-oriented 4,740 N/A 4,740 5,214 5,688 6,162 (C) 7226 19 10 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, not further worked than hot-rolled 3,620 N/A 3,620 3,982 4,344 4,706 (C) 7226 19 80 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, cold-rolled "cold-reduced", whether or not further worked, or hot-rolled and further worked, non-grain-oriented 3,700 N/A 3,700 4,070 4,440 4,810 (F) 7226 20 00 Flat-rolled products of high-speed steel, of a width of <= 600 mm, hot-rolled or cold-rolled "cold-reduced" 3,620 N/A 3,620 3,982 4,344 4,706 (F) 7226 91 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than hot-rolled (excl. products of high-speed steel or silicon-electrical steel) 3,620 N/A 3,620 3,982 4,344 4,706 (F) 7226 92 00 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of high-speed steel or silicon-electrical steel) 3,700 N/A 3,700 4,070 4,440 4,810 (F) 7226 99 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. products of high-speed steel or silicon-electrical steel) 3,700 N/A 3,700 4,070 4,440 4,810 (F) 7227 Bars and rods of alloy steel other than stainless, hot-rolled, in irregularly wound coils 3,440 N/A 3,440 3,784 4,128 4,472 (C)/(F) 7228 Other bars and rods of alloy steel other than stainless, angles, shapes and sections of alloy steel other than stainless, n.e.s.; hollow drill bars and rods, of alloy or non-alloy steel see below N/A see below see below see below see below   7228 10 20 Bars and rods of high-speed steel, not further worked than hot-rolled, hot-drawn or extruded, and hot-rolled, hot-drawn or extruded, not further worked than clad (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,440 N/A 3,440 3,784 4,128 4,472 (F) 7228 10 50 Bars and rods of high-speed steel, forged (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 4,170 N/A 4,170 4,587 5,004 5,421 (F) 7228 10 90 Bars and rods of high-speed steel, not further worked than cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked (excl. forged products, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,440 N/A 3,440 3,784 4,128 4,472 (F) 7228 20 Bars and rods of silico-manganese steel (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,440 N/A 3,440 3,784 4,128 4,472 (F) 7228 30 Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,440 N/A 3,440 3,784 4,128 4,472 (C)/(F) 7228 40 Bars and rods of alloy steel other than stainless, not further worked than forged (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 4,170 N/A 4,170 4,587 5,004 5,421 (F) 7228 50 Bars and rods of alloy steel other than stainless, not further worked than cold-formed or cold-finished (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,440 N/A 3,440 3,784 4,128 4,472 (C)/(F) 7228 60 Bars and rods of alloy steel other than stainless, cold-formed or cold-finished and further worked or hot-formed and further worked, n.e.s. (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,440 N/A 3,440 3,784 4,128 4,472 (F) 7228 70 Angles, shapes and sections of alloy steel other than stainless, n.e.s. 3,440 N/A 3,440 3,784 4,128 4,472 (F) 7228 80 00 Hollow drill bars and rods, of alloy or non-alloy steel 3,440 N/A 3,440 3,784 4,128 4,472 (F) 7229 Wire of alloy steel other than stainless, in coils (excl. bars and rods) 3,440 N/A 3,440 3,784 4,128 4,472 (C)/(F) 7301 Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel 2,500 N/A 2,500 2,750 3 3,250 (C) 7302 Railway or tramway track construction material of iron or steel, the following : rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers "cross-ties", fish-plates, chairs, chair wedges, sole plates "base plates", rail clips, bedplates, ties and other material specialised for jointing or fixing rails 2,810 N/A 2,810 3,091 3,372 3,653 (C) 7303 Tubes, pipes and hollow profiles, of cast iron see below N/A see below see below see below see below   7303 00 Tubes, pipes and hollow profiles, of cast iron 2,730 N/A 2,730 3,003 3,276 3,549   7304 Tubes, pipes and hollow profiles, seamless, of iron or steel (excl. products of cast iron) see below N/A see below see below see below see below   7304 11 00 Line pipe of a kind used for oil or gas pipelines, seamless, of stainless steel 3,110 N/A 3,110 3,421 3,732 4,043   7304 19 Line pipe of a kind used for oil or gas pipelines, seamless, of iron or steel (excl. products of stainless steel or of cast iron) 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7304 22 00 Drill pipe, seamless, of stainless steel, of a kind used in drilling for oil or gas 3,110 N/A 3,110 3,421 3,732 4,043   7304 23 00 Drill pipe, seamless, of a kind used in drilling for oil or gas, of iron or steel (excl. products of stainless steel or of cast iron) 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7304 24 00 Casing and tubing, seamless, of a kind used for drilling for oil or gas, of stainless steel 3,110 N/A 3,110 3,421 3,732 4,043   7304 29 Casing and tubing, seamless, of iron or steel, of a kind used in drilling for oil or gas (excl. products of cast iron) 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7304 31 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" (excl. cast iron products and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used for drilling for oil or gas) 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7304 39 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, not cold-drawn or cold-rolled "cold-reduced" (excl. cast iron products, line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas) 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7304 41 00 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas) 3,110 N/A 3,110 3,421 3,732 4,043   7304 49 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines or of a kind used for drilling for oil or gas) 3,110 N/A 3,110 3,421 3,732 4,043   7304 51 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil) 2,230 N/A 2,230 2,453 2,676 2,899 (F) 7304 59 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil) 2,230 N/A 2,230 2,453 2,676 2,899 (C)/(F) 7304 90 00 Tubes, pipes and hollow profiles, seamless, of non-circular cross-section, of iron or steel (excl. products of cast iron) 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7305 Tubes and pipes, having circular cross-sections and an external diameter of > 406,4 mm, of flat-rolled products of iron or steel "e.g., welded, riveted or similarly closed" 2,500 N/A 2,500 2,750 3 3,250 (C) 7306 Tubes, pipes and hollow profiles "e.g., open seam or welded, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless tubes and pipes and tubes having internal and external circular cross-sections and an external diameter of > 406,4 mm) see below N/A see below – – –   7306 11 00 Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm 3,370 N/A 3,370 3,707 4,044 4,381   7306 19 00 Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron) 2,500 N/A 2,500 2,750 3 3,250 (C) 7306 21 00 Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm 3,370 N/A 3,370 3,707 4,044 4,381   7306 29 00 Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron) 2,500 N/A 2,500 2,750 3 3,250 (C) 7306 30 12 Precision tubes, welded, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" 2,500 N/A 2,500 2,750 3 3,250 (C) 7306 30 18 Precision tubes, welded, of circular cross-section, of iron or non-alloy steel (excl. cold-drawn or cold-rolled) 2,420 N/A 2,420 2,662 2,904 3,146   7306 30 41 Threaded or threadable tubes "gas pipe", welded, of circular cross-section, of iron or non-alloy steel, plated or coated with zinc 2,500 N/A 2,500 2,750 3 3,250 (C) 7306 30 49 Threaded or threadable tubes "gas pipe", welded, of circular cross-section, of iron or non-alloy steel (excl. products plated or coated with zinc) 2,500 N/A 2,500 2,750 3 3,250 (C) 7306 30 72 Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel, of an external diameter of <= 168,3 mm, plated or coated with zinc (excl. line pipe of a kind used for oil or gas pipelines or casing and tubingof a kind used in drilling for oil or gas) 2,500 N/A 2,500 2,750 3 3,250 (C) 7306 30 77 Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel of an external diameter of <= 168,3 mm (excl. plated or coated with zinc and line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used in drilling for oil or gas, precision tubes and threaded or threadable tubes "gas pipe") 2,500 N/A 2,500 2,750 3 3,250 (C) 7306 30 80 Tubes, pipes and hollow profiles, welded, having a circular cross-section, of iron or steel, of an external diameter of > 168,3 mm but <= 406,4 mm (excl. line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, or precision steel tubes, electrical conduit tubes or threaded or threadable tubes "gas pipe") 2,500 N/A 2,500 2,750 3 3,250 (C) 7306 40 20 Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. products having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) 3,370 N/A 3,370 3,707 4,044 4,381   7306 40 80 Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel (excl. products cold-drawn or cold-rolled "cold-reduced", tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) 3,290 N/A 3,290 3,619 3,948 4,277   7306 50 21 Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" 2,490 N/A 2,490 2,739 2,988 3,237 (F) 7306 50 29 Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless (excl. cold-drawn or cold-rolled) 2,410 N/A 2,410 2,651 2,892 3,133 (F) 7306 50 80 Tubes, pipes and hollow profiles, welded, of circular cross-section, of alloy steel other than stainless (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and precision steel tubes) 2,490 N/A 2,490 2,739 2,988 3,237 (F) 7306 61 10 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel 3,370 N/A 3,370 3,707 4,044 4,381   7306 61 92 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of <= 2 mm 2,500 N/A 2,500 2,750 3 3,250 (C) 7306 61 99 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of > 2 mm 2,500 N/A 2,500 2,750 3 3,250 (C) 7306 69 10 Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) 3,370 N/A 3,370 3,707 4,044 4,381   7306 69 90 Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of iron or steel other than stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) 2,500 N/A 2,500 2,750 3 3,250 (C) 7306 90 00 Tubes, pipes and hollow profiles "e.g., open seam, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless or welded tubes and pipes and tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm) 2,500 N/A 2,500 2,750 3 3,250 (C) 7307 Tube or pipe fittings "e.g. couplings, elbows, sleeves", of iron or steel see below N/A see below see below see below see below   7307 11 Tube or pipe fittings of non-malleable cast iron 2,930 N/A 2,930 3,223 3,516 3,809   7307 19 10 Tube or pipe fittings of cast iron (excl. of non-malleable) 2,930 N/A 2,930 3,223 3,516 3,809   7307 19 90 Cast tube or pipe fittings of steel 3,040 N/A 3,040 3,344 3,648 3,952 (C) 7307 21 00 Flanges of stainless steel (excl. cast products) 2,780 N/A 2,780 3,058 3,336 3,614   7307 22 Threaded elbows, bends and sleeves of stainless steel (excl. cast products) 2,780 N/A 2,780 3,058 3,336 3,614   7307 23 Butt welding tube or pipe fittings of stainless steel (excl. cast products) 2,780 N/A 2,780 3,058 3,336 3,614   7307 29 Tube or pipe fittings of stainless steel (excl. cast products, flanges, threaded elbows, bends and sleeves and butt weldings fittings) 2,780 N/A 2,780 3,058 3,336 3,614   7307 91 00 Flanges of iron or steel (excl. cast or stainless products) 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7307 92 Threaded elbows, bends and sleeves, of stainless steel (excl. cast or stainless products) 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7307 93 Butt welding fittings of iron or steel (excl. cast iron or stainless steel products, and flanges) 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7307 99 Tube or pipe fittings, of iron or steel (excl. cast iron or stainless steel products; flanges; threaded elbows, bends and sleeves; butt welding fittings) 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7308 Structures and parts of structures "e.g., bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns", of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel (excl. prefabricated buildings of heading 9406) 3,040 N/A 3,040 3,344 3,648 3,952 (C) 7309 Reservoirs, tanks, vats and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of > 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated (excl. containers specifically constructed or equipped for one or more types of transport) 3,210 N/A 3,210 3,531 3,852 4,173 (C) 7310 Tanks, casks, drums, cans, boxes and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of <= 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated, n.e.s. 2,500 N/A 2,500 2,750 3 3,250 (C) 7311 Containers of iron or steel, for compressed or liquefied gas (excl. containers specifically constructed or equipped for one or more types of transport) see below N/A see below see below see below see below   7311 00 Containers of iron or steel, for compressed or liquefied gas (excl. containers specifically constructed or equipped for one or more types of transport) 3,030 N/A 3,030 3,333 3,636 3,939 (C) 7318 Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers, incl. spring washers, and similar articles, of iron or steel (excl. lag screws, stoppers, plugs and the like, threaded) see below N/A see below see below see below see below   7318 11 00 Coach screws of iron or steel 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7318 12 10 Wood screws of stainless steel (excl. coach screws) 3,110 N/A 3,110 3,421 3,732 4,043 (C) 7318 12 90 Wood screws of iron or steel other than stainless (excl. coach screws) 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7318 13 00 Screw hooks and screw rings, of iron or steel 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7318 14 10 Self-tapping screws, of stainless steel (excl. wood screws) 3,110 N/A 3,110 3,421 3,732 4,043 (C) 7318 14 91 Spaced-thread screws of iron or steel other than stainless 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7318 14 99 Self-tapping screws of iron or steel other than stainless (excl. spaced-thread screws and wood screws) 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7318 15 Threaded screws and bolts, of iron or steel, whether or not with their nuts and washers (excl. coach screws and other wood screws, screw hooks and screw rings, self-tapping screws, lag screws, stoppers, plugs and the like, threaded) 2,770 N/A 2,770 3,047 3,324 3,601 (C) 7318 16 Nuts of iron or steel 2,980 N/A 2,980 3,278 3,576 3,874 (C) 7318 19 00 Threaded articles, of iron or steel, n.e.s. 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7318 21 00 Spring washers and other lock washers, of iron or steel 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7318 22 00 Washers of iron or steel (excl. spring washers and other lock washers) 2,370 N/A 2,370 2,607 2,844 3,081 (C) 7318 23 00 Rivets of iron or steel (excl. tubular and bifurcated rivets for particular uses) 2,320 N/A 2,320 2,552 2,784 3,016 (C) 7318 24 00 Cotters and cotter pins, of iron or steel 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7318 29 00 Non-threaded articles, of iron or steel 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7326 Articles of iron or steel, n.e.s. (excl. cast articles) see below N/A see below see below see below see below   7326 11 00 Grinding balls and similar articles for mills, of iron or steel, forged or stamped, but not further worked 3,040 N/A 3,040 3,344 3,648 3,952 (C) 7326 19 Articles of iron or steel, forged or stamped, but not further worked, n.e.s. (excl. grinding balls and similar articles for mills) 3,040 N/A 3,040 3,344 3,648 3,952 (C) 7326 20 00 Articles of iron or steel wire, n.e.s. 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7326 90 30 Ladders and steps, of iron or steel 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7326 90 40 Pallets and similar platforms for handling goods, of iron or steel 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7326 90 50 Reels for cables, piping and the like, of iron or steel 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7326 90 60 Ventilators, non-mechanical, guttering, hooks and like articles used in the building industry, n.e.s., of iron or steel 2,310 N/A 2,310 2,541 2,772 3,003 (C) 7326 90 92 Articles of iron or steel, open-die forged, n.e.s. 3,040 N/A 3,040 3,344 3,648 3,952 (C) 7326 90 94 Articles of iron or steel, closed-die forged, n.e.s. 3,040 N/A 3,040 3,344 3,648 3,952 (C) 7326 90 96 Sintered articles of iron or steel, n.e.s. 3,040 N/A 3,040 3,344 3,648 3,952 (C) 7326 90 98 Articles of iron or steel, n.e.s. 2,500 N/A 2,500 2,750 3 3,250 (C) United States Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay 0,220 0,090 0,310 0,341 0,372 0,403 (A) 2523 10 00 White clinker 1,320 0,050 1,370 1,507 1,644 1,781 (B) 2523 10 00 Grey clinker 1,160 0,030 1,190 1,309 1,428 1,547 (A) 2523 21 00 White Portland cement 1,240 0,140 1,380 1,518 1,656 1,794   2523 29 00 Grey Portland cement 1,160 0,060 1,210 1,331 1,452 1,573   2523 90 00 White hydraulic cements 1,290 0,160 1,450 1,595 1,740 1,885 (B) 2523 90 00 Grey hydraulic cements 1,100 0,060 1,160 1,276 1,392 1,508 (A) 2523 30 00 Aluminous cement 1,800 0,140 1,940 2,134 2,328 2,522   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 1,870 0,030 1,900 1,919 1,919 1,919   2814 10 00 Anhydrous ammonia 3,320 0,090 3,410 3,444 3,444 3,444   2814 20 00 Ammonia in aqueous solution 1 0,030 1,020 1,030 1,030 1,030   2834 21 00 Nitrate of potassium 1,860 0,040 1,910 1,929 1,929 1,929   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,740 0,020 0,760 0,768 0,768 0,768   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 1,220 0,020 1,240 1,252 1,252 1,252   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 2,220 0,070 2,290 2,313 2,313 2,313   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 2,170 0,070 2,240 2,262 2,262 2,262   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,970 0,060 1,030 1,040 1,040 1,040   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,460 0,060 1,530 1,545 1,545 1,545   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,430 0,050 1,470 1,485 1,485 1,485   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,190 0,070 2,270 2,293 2,293 2,293   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,910 0,070 1,980 2 2 2   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,910 0,070 1,980 2 2 2   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,920 0,050 2,970 3 3 3   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,840 0,060 1,910 1,929 1,929 1,929   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,680 0,060 1,740 1,757 1,757 1,757   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,950 0,070 2,020 2,040 2,040 2,040   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,900 0,060 0,960 0,970 0,970 0,970   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1 0,070 1,060 1,071 1,071 1,071   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,680 0,050 0,740 0,747 0,747 0,747   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,780 0,040 0,820 0,828 0,828 0,828   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,500 0,030 0,530 0,535 0,535 0,535   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,340 0,090 1,420 1,434 1,434 1,434   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,900 0,100 1,010 1,020 1,020 1,020   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,280 0,050 1,340 1,353 1,353 1,353   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,670 0,040 0,710 0,717 0,717 0,717   Aluminium         10 % mark-up 20 % mark-up 30 % mark-up   7601 Unwrought aluminium 1,700 N/A 1,700 1,870 2,040 2,210 (K) 7603 Aluminium powders and flakes 2,032 N/A 2,032 2,235 2,439 2,642 (K) 7604 10 10 Bars and rods 2,258 N/A 2,258 2,484 2,709 2,935 (K) 7604 10 90 Profiles 2,278 N/A 2,278 2,506 2,734 2,962 (K) 7604 21 00 Hollow profiles 2,278 N/A 2,278 2,506 2,734 2,962 (K) 7604 29 10 Bars and rods 2,258 N/A 2,258 2,484 2,709 2,935 (K) 7604 29 90 Profiles 2,278 N/A 2,278 2,506 2,734 2,962 (K) 7605 Aluminium wire 2,258 N/A 2,258 2,484 2,709 2,935 (K) 7606 Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm 2,730 N/A 2,730 3,003 3,276 3,549 (K) 7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm 2,730 N/A 2,730 3,003 3,276 3,549 (K) 7608 Aluminium tubes and pipes 2,278 N/A 2,278 2,506 2,734 2,962 (K) 7609 00 00 Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) 2,278 N/A 2,278 2,506 2,734 2,962 (K) 7610 10 00 Doors, windows and their frames and thresholds for doors 2,278 N/A 2,278 2,506 2,734 2,962 (K) 7610 90 Other 2,278 N/A 2,278 2,506 2,734 2,962 (K) 7610 90 10 Bridges and bridge-sections, towers and lattice masts 2,278 N/A 2,278 2,506 2,734 2,962 (K) 7610 90 90 Other 2,278 N/A 2,278 2,506 2,734 2,962 (K) 7611 00 00 Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 2,730 N/A 2,730 3,003 3,276 3,549 (K) 7612 Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 2,730 N/A 2,730 3,003 3,276 3,549 (K) 7613 00 00 Aluminium containers for compressed or liquefied gas 2,730 N/A 2,730 3,003 3,276 3,549 (K) 7614 Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated 2,258 N/A 2,258 2,484 2,709 2,935 (K) 7616 10 00 Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles 2,730 N/A 2,730 3,003 3,276 3,549 (K) 7616 91 00 Cloth, grill, netting and fencing, of aluminium wire 2,730 N/A 2,730 3,003 3,276 3,549 (K) 7616 99 10 Cast 2,032 N/A 2,032 2,235 2,439 2,642 (K) 7616 99 90 Other 2,730 N/A 2,730 3,003 3,276 3,549 (K) Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 26,640 N/A 26,640 29,304 31,968 34,632   Iron and steel         10 % mark-up 20 % mark-up 30 % mark-up   2601 12 00 Agglomerated iron ores and concentrates (excl. roasted iron pyrites) 0,660 0,020 0,680 0,748 0,816 0,884   7201 Pig iron and spiegeleisen, in pigs, blocks or other primary forms 1,210 N/A 1,210 1,331 1,452 1,573   7202 11 Ferro-manganese, containing by weight > 2% of carbon 1,690 N/A 1,690 1,859 2,028 2,197   7202 19 Ferro-manganese, containing by weight <= 2% carbon – N/A – – – –   7202 41 Ferro-chromium, containing by weight > 4% of carbon 2,350 N/A 2,350 2,585 2,820 3,055   7202 49 Ferro-chromium, containing by weight <= 4% of carbon – N/A – – – –   7202 60 00 Ferro-nickel 3,480 N/A 3,480 3,828 4,176 4,524   7203 Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99,94%, in lumps, pellets or similar forms 0,450 N/A 0,450 0,495 0,540 0,585   7205 Granules and powders of pig iron, spiegeleisen, iron or steel (excl. granules and powders of ferro-alloys, turnings and filings of iron or steel, radioactive iron powders "isotopes" and certain low-calibre, substandard balls for ballbearings) 2,425 N/A 2,425 2,667 2,910 3,152 (C) 7206 Iron and non-alloy steel in ingots or other primary forms (excl. remelting scrap ingots, products obtained by continuous casting and iron of heading 7203) see below N/A see below see below see below see below   7206 10 00 Ingots, of iron and non-alloy steel (excl. remelted scrap ingots, continuous cast products, iron of heading 7203) 1,330 N/A 1,330 1,463 1,596 1,729 (C) 7206 90 00 Iron and non-alloy steel, in puddled bars or other primary forms (excl. ingots, remelted scrap ingots, continuous cast products, iron of heading 7203) 1,330 N/A 1,330 1,463 1,596 1,729 (C) 7207 Semi-finished products of iron or non-alloy steel see below N/A see below see below see below see below   7207 11 11 Semi-finished products, of non-alloy free-cutting steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting 1,390 N/A 1,390 1,529 1,668 1,807 (C) 7207 11 14 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness of <= 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel) 1,390 N/A 1,390 1,529 1,668 1,807 (C) 7207 11 16 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness of > 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel) 1,390 N/A 1,390 1,529 1,668 1,807 (C) 7207 11 90 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular cross-section, the width < twice the thickness, forged 1,330 N/A 1,330 1,463 1,596 1,729 (C) 7207 12 10 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtained by continuous casting 1,390 N/A 1,390 1,529 1,668 1,807 (C) 7207 12 90 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular "other than square" cross-section, the width >= twice the thickness, forged 1,330 N/A 1,330 1,463 1,596 1,729 (C) 7207 19 12 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting 1,390 N/A 1,390 1,529 1,668 1,807 (C) 7207 19 19 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, forged 1,330 N/A 1,330 1,463 1,596 1,729 (C) 7207 19 80 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon (excl. semi-products, of square, rectangular, circular or polygonal cross-section) 1,390 N/A 1,390 1,529 1,668 1,807 (C) 7207 20 11 Semi-finished products, of non-alloy free-cutting steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting 1,390 N/A 1,390 1,529 1,668 1,807 (C) 7207 20 15 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% but < 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel) 1,390 N/A 1,390 1,529 1,668 1,807 (C) 7207 20 17 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel) 1,390 N/A 1,390 1,529 1,668 1,807 (C) 7207 20 19 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, forged 1,330 N/A 1,330 1,463 1,596 1,729 (C) 7207 20 32 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtained by continuous casting 1,390 N/A 1,390 1,529 1,668 1,807 (C) 7207 20 39 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of rectangular "other than square" cross-section and the width >= twice the thickness, forged 1,330 N/A 1,330 1,463 1,596 1,729 (C) 7207 20 52 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting 1,390 N/A 1,390 1,529 1,668 1,807 (C) 7207 20 59 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of circular or polygonal cross-section, forged 1,330 N/A 1,330 1,463 1,596 1,729 (C) 7207 20 80 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon (excl. those of square, rectangular, circular or polygonal cross-section) 1,390 N/A 1,390 1,529 1,668 1,807 (C) 7208 Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled, not clad, plated or coated 1,400 N/A 1,400 1,540 1,680 1,820 (C) 7209 Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, cold-rolled "cold-reduced", not clad, plated or coated 1,440 N/A 1,440 1,584 1,728 1,872 (C) 7210 Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated 1,440 N/A 1,440 1,584 1,728 1,872 (C) 7211 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", not clad, plated or coated see below N/A see below see below see below see below   7211 13 00 Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as "wide flats" 1,400 N/A 1,400 1,540 1,680 1,820 (C) 7211 14 00 Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, not further worked than hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm (excl. "wide flats") 1,400 N/A 1,400 1,540 1,680 1,820 (C) 7211 19 00 Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, simply hot-rolled, not clad, plated or coated, of a thickness < 4,75 mm (excl. "wide flats") 1,400 N/A 1,400 1,540 1,680 1,820 (C) 7211 23 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight < 0,25% of carbon 1,440 N/A 1,440 1,584 1,728 1,872 (C) 7211 29 00 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight >= 0,25% of carbon 1,440 N/A 1,440 1,584 1,728 1,872 (C) 7211 90 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked, but not clad, plated or coated 1,440 N/A 1,440 1,584 1,728 1,872 (C) 7212 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated 1,440 N/A 1,440 1,584 1,728 1,872 (C) 7213 Bars and rods of iron or non-alloy steel, hot-rolled, in irregularly wound coils 1,390 N/A 1,390 1,529 1,668 1,807 (C) 7214 Bars and rods, of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but incl. those twisted after rolling (excl. in irregularly wound coils) see below N/A see below see below see below see below   7214 10 00 Bars and rods, of iron or non-alloy steel, not further worked than forged (excl. in irregularly wound coils) 1,330 N/A 1,330 1,463 1,596 1,729 (C) 7214 20 00 Bars and rods, of iron or non-alloy steel, with indentations, ribs, groves or other deformations produced during the rolling process 1,390 N/A 1,390 1,529 1,668 1,807 (C) 7214 30 00 Bars and rods, of non-alloy free-cutting steel, not further worked than hot-rolled, hot-drawn or hot-extruded (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling) 1,390 N/A 1,390 1,529 1,668 1,807 (C) 7214 91 Bars and rods, of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, of rectangular "other than square" cross-section (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process, bars and rods twisted after rolling and free-cutting steel) 1,390 N/A 1,390 1,529 1,668 1,807 (C) 7214 99 Bars and rods, of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded (excl. of rectangular [other than square] cross-section and those containing indentations, ribs, grooves or other deformations produced during the rolling process, and of non-alloy free-cutting steel) 1,390 N/A 1,390 1,529 1,668 1,807 (C) 7215 Bars and rods, of iron or non-alloy steel, cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked, n.e.s. 1,390 N/A 1,390 1,529 1,668 1,807 (C) 7216 Angles, shapes and sections of iron or non-alloy steel, n.e.s. 1,390 N/A 1,390 1,529 1,668 1,807 (C) 7217 Wire of iron or non-alloy steel, in coils (excl. bars and rods) see below N/A see below see below see below see below   7217 10 Wire of iron or non-alloy steel, in coils, not plated or coated, whether or not polished (excl. bars and rods) 1,390 N/A 1,390 1,529 1,668 1,807 (C) 7217 20 Wire of iron or non-alloy steel, in coils, plated or coated with zinc (excl. bars and rods) 1,390 N/A 1,390 1,529 1,668 1,807 (C) 7217 30 Wire of iron or non-alloy steel, in coils, plated or coated with base metals (excl. plated or coated with zinc, and bars and rods) 1,390 N/A 1,390 1,529 1,668 1,807 (C) 7217 90 Wire of iron or non-alloy steel, in coils, plated or coated (excl. plated or coated with base metals, and bars and rods) 1,390 N/A 1,390 1,529 1,668 1,807 (C) 7218 Stainless steel in ingots or other primary forms (excl. remelting scrap ingots and products obtained by continuous casting); semi-finished products of stainless steel see below N/A see below – – –   7218 10 00 Steel, stainless, in ingots and other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) 3,110 N/A 3,110 3,421 3,732 4,043   7218 91 Semi-finished products of stainless steel, of rectangular "other than square" cross-section 3,220 N/A 3,220 3,542 3,864 4,186   7218 99 11 Semi-finished products of stainless steel, of square cross-section, rolled or obtained by continuous casting 3,220 N/A 3,220 3,542 3,864 4,186   7218 99 19 Semi-finished products of stainless steel, of square cross-section, forged 3,110 N/A 3,110 3,421 3,732 4,043   7218 99 20 Semi-finished products of stainless steel, of circular cross-section or of cross-section other than square or rectangular, rolled or obtained by continuous casting 3,220 N/A 3,220 3,542 3,864 4,186   7218 99 80 Semi-finished products of stainless steel, forged (excl. products of square or rectangular cross-section) 3,110 N/A 3,110 3,421 3,732 4,043   7219 Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" see below N/A see below see below see below see below   7219 11 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of > 10 mm 3,220 N/A 3,220 3,542 3,864 4,186   7219 12 Flat-rolled products of stainless steel, of a width of>= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 4,7 mm and <= 10 mm 3,220 N/A 3,220 3,542 3,864 4,186   7219 13 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 3 mm and < 4,75 mm 3,220 N/A 3,220 3,542 3,864 4,186   7219 14 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of < 3 mm 3,220 N/A 3,220 3,542 3,864 4,186   7219 21 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of > 10 mm 3,220 N/A 3,220 3,542 3,864 4,186   7219 22 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 4,75 mm and <= 10 mm 3,220 N/A 3,220 3,542 3,864 4,186   7219 23 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 3 mm and < 4,75 mm 3,220 N/A 3,220 3,542 3,864 4,186   7219 24 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of < 3 mm 3,220 N/A 3,220 3,542 3,864 4,186   7219 31 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 4,75 mm 3,270 N/A 3,270 3,597 3,924 4,251   7219 32 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 3 mm but < 4,75 mm 3,270 N/A 3,270 3,597 3,924 4,251   7219 33 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of > 1 mm but < 3 mm 3,270 N/A 3,270 3,597 3,924 4,251   7219 34 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 0,5 mm but <= 1 mm 3,270 N/A 3,270 3,597 3,924 4,251   7219 35 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of < 0,5 mm 3,270 N/A 3,270 3,597 3,924 4,251   7219 90 Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked 3,270 N/A 3,270 3,597 3,924 4,251   7220 Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" see below N/A see below see below see below see below   7220 11 00 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of >= 4,75 mm 3,220 N/A 3,220 3,542 3,864 4,186   7220 12 00 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of < 4,75 mm 3,220 N/A 3,220 3,542 3,864 4,186   7220 20 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" 3,270 N/A 3,270 3,597 3,924 4,251   7220 90 Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked 3,270 N/A 3,270 3,597 3,924 4,251   7221 Bars and rods of stainless steel, hot-rolled, in irregularly wound coils 3,270 N/A 3,270 3,597 3,924 4,251   7222 Other bars and rods of stainless steel; angles, shapes and sections of stainless steel, n.e.s. see below N/A see below see below see below see below   7222 11 Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only hot-extruded, of circular cross-section 3,270 N/A 3,270 3,597 3,924 4,251   7222 19 Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only extruded (excl. of circular cross-section) 3,270 N/A 3,270 3,597 3,924 4,251   7222 20 Other bars and rods of stainless steel, not further worked than cold-formed or cold-finished 3,270 N/A 3,270 3,597 3,924 4,251   7222 30 Other bars and rods of stainless steel, cold-formed or cold-finished and further worked, or not further worked than forged, or forged, or hot-formed by other means and further worked, n.e.s. 3,110 N/A 3,110 3,421 3,732 4,043   7222 40 Angles, shapes and sections of stainless steel, n.e.s. 3,270 N/A 3,270 3,597 3,924 4,251   7223 Wire of stainless steel, in coils (excl. bars and rods) see below N/A see below see below see below see below   7223 00 Wire of stainless steel, in coils (excl. bars and rods) 3,270 N/A 3,270 3,597 3,924 4,251   7224 Steel, alloy, other than stainless, in ingots or other primary forms, semi-finished products of alloy steel other than stainless (excl. waste and scrap in ingot form, and products obtained by continuous casting) see below N/A see below see below see below see below   7224 10 Steel, alloy, other than stainless, in ingots or other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) 3,490 N/A 3,490 3,839 4,188 4,537 (F) 7224 90 02 Semi-finished products of tool steel 3,590 N/A 3,590 3,949 4,308 4,667 (F) 7224 90 03 Semi-finished products of high-speed steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting the width measuring < twice the thickness 3,590 N/A 3,590 3,949 4,308 4,667 (F) 7224 90 05 Semi-finished products of steel containing by weight <= 0,7% of carbon, 0,5% to 1,2% of manganese, 0,6% to 2,3% of silicon, or of steel containing by weight >= 0,0008% of boron with any other element < the minimum content referred to in Note 1 f to chapter 72, of square or rectangular cross-section, hot rolled or obtained by continuous casting, the width measuring < twice the thickness 3,590 N/A 3,590 3,949 4,308 4,667 (F) 7224 90 07 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring < twice the thickness (excl. of tool steel, high-speed steel and articles of subheading 7224.90.05) 3,590 N/A 3,590 3,949 4,308 4,667 (F) 7224 90 14 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring >= twice the thickness (excl. of tool steel) 3,590 N/A 3,590 3,949 4,308 4,667 (F) 7224 90 18 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, forged (excl. of tool steel) 3,490 N/A 3,490 3,839 4,188 4,537 (F) 7224 90 31 Semi-finished products of steel containing by weight 0,9% to 1,15% carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting 3,590 N/A 3,590 3,949 4,308 4,667 (F) 7224 90 38 Semi-finished products of alloy steel, other than stainless steel, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting (excl. of tool steel and products containing by weight 0,9% to 1,15% of carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum) 3,590 N/A 3,590 3,949 4,308 4,667 (F) 7224 90 90 Semi-finished products of alloy steel, other than stainless steel, forged (excl. of tool steel and products of square or rectangular, circular or polygamol cross-section) 3,490 N/A 3,490 3,839 4,188 4,537 (F) 7225 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" see below N/A see below see below see below see below   7225 11 00 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, grain-oriented 4,730 N/A 4,730 5,203 5,676 6,149 (C) 7225 19 10 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, hot-rolled 3,590 N/A 3,590 3,949 4,308 4,667 (C) 7225 19 90 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, cold-rolled "cold-reduced", non-grain-oriented 3,640 N/A 3,640 4,004 4,368 4,732 (F) 7225 30 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, in coils (excl. products of silicon-electrical steel) 3,590 N/A 3,590 3,949 4,308 4,667 (F) 7225 40 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, not in coils (excl. products of silicon-electrical steel) 3,590 N/A 3,590 3,949 4,308 4,667 (F) 7225 50 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of silicon-electrical steel) 3,640 N/A 3,640 4,004 4,368 4,732 (F) 7225 91 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and electrolytically plated or coated with zinc (excl. products of silicon-electrical steel) 3,640 N/A 3,640 4,004 4,368 4,732 (F) 7225 92 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and plated or coated with zinc (excl. electrolytically plated or coated and products of silicon-electrical steel) 3,640 N/A 3,640 4,004 4,368 4,732 (F) 7225 99 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. plated or coated with zinc and products of silicon-electrical steel) 3,640 N/A 3,640 4,004 4,368 4,732 (F) 7226 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" see below N/A see below see below see below see below   7226 11 00 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", grain-oriented 4,730 N/A 4,730 5,203 5,676 6,149 (C) 7226 19 10 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, not further worked than hot-rolled 3,590 N/A 3,590 3,949 4,308 4,667 (C) 7226 19 80 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, cold-rolled "cold-reduced", whether or not further worked, or hot-rolled and further worked, non-grain-oriented 3,640 N/A 3,640 4,004 4,368 4,732 (F) 7226 20 00 Flat-rolled products of high-speed steel, of a width of <= 600 mm, hot-rolled or cold-rolled "cold-reduced" 3,590 N/A 3,590 3,949 4,308 4,667 (F) 7226 91 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than hot-rolled (excl. products of high-speed steel or silicon-electrical steel) 3,590 N/A 3,590 3,949 4,308 4,667 (F) 7226 92 00 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of high-speed steel or silicon-electrical steel) 3,640 N/A 3,640 4,004 4,368 4,732 (F) 7226 99 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. products of high-speed steel or silicon-electrical steel) 3,640 N/A 3,640 4,004 4,368 4,732 (F) 7227 Bars and rods of alloy steel other than stainless, hot-rolled, in irregularly wound coils 3,640 N/A 3,640 4,004 4,368 4,732 (C)/(F) 7228 Other bars and rods of alloy steel other than stainless, angles, shapes and sections of alloy steel other than stainless, n.e.s.; hollow drill bars and rods, of alloy or non-alloy steel see below N/A see below see below see below see below   7228 10 20 Bars and rods of high-speed steel, not further worked than hot-rolled, hot-drawn or extruded, and hot-rolled, hot-drawn or extruded, not further worked than clad (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,640 N/A 3,640 4,004 4,368 4,732 (F) 7228 10 50 Bars and rods of high-speed steel, forged (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,490 N/A 3,490 3,839 4,188 4,537 (F) 7228 10 90 Bars and rods of high-speed steel, not further worked than cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked (excl. forged products, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,640 N/A 3,640 4,004 4,368 4,732 (F) 7228 20 Bars and rods of silico-manganese steel (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,640 N/A 3,640 4,004 4,368 4,732 (F) 7228 30 Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,640 N/A 3,640 4,004 4,368 4,732 (C)/(F) 7228 40 Bars and rods of alloy steel other than stainless, not further worked than forged (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,490 N/A 3,490 3,839 4,188 4,537 (F) 7228 50 Bars and rods of alloy steel other than stainless, not further worked than cold-formed or cold-finished (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,640 N/A 3,640 4,004 4,368 4,732 (C)/(F) 7228 60 Bars and rods of alloy steel other than stainless, cold-formed or cold-finished and further worked or hot-formed and further worked, n.e.s. (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,640 N/A 3,640 4,004 4,368 4,732 (F) 7228 70 Angles, shapes and sections of alloy steel other than stainless, n.e.s. 3,640 N/A 3,640 4,004 4,368 4,732 (F) 7228 80 00 Hollow drill bars and rods, of alloy or non-alloy steel 3,640 N/A 3,640 4,004 4,368 4,732 (F) 7229 Wire of alloy steel other than stainless, in coils (excl. bars and rods) 3,640 N/A 3,640 4,004 4,368 4,732 (C)/(F) 7301 Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel 1,440 N/A 1,440 1,584 1,728 1,872 (C) 7302 Railway or tramway track construction material of iron or steel, the following : rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers "cross-ties", fish-plates, chairs, chair wedges, sole plates "base plates", rail clips, bedplates, ties and other material specialised for jointing or fixing rails 2,740 N/A 2,740 3,014 3,288 3,562 (C) 7303 Tubes, pipes and hollow profiles, of cast iron see below N/A see below see below see below see below   7303 00 Tubes, pipes and hollow profiles, of cast iron 1,850 N/A 1,850 2,035 2,220 2,405   7304 Tubes, pipes and hollow profiles, seamless, of iron or steel (excl. products of cast iron) see below N/A see below see below see below see below   7304 11 00 Line pipe of a kind used for oil or gas pipelines, seamless, of stainless steel 3,190 N/A 3,190 3,509 3,828 4,147   7304 19 Line pipe of a kind used for oil or gas pipelines, seamless, of iron or steel (excl. products of stainless steel or of cast iron) 1,974 N/A 1,974 2,171 2,369 2,566 (C) 7304 22 00 Drill pipe, seamless, of stainless steel, of a kind used in drilling for oil or gas 3,190 N/A 3,190 3,509 3,828 4,147   7304 23 00 Drill pipe, seamless, of a kind used in drilling for oil or gas, of iron or steel (excl. products of stainless steel or of cast iron) 1,974 N/A 1,974 2,171 2,369 2,566 (C) 7304 24 00 Casing and tubing, seamless, of a kind used for drilling for oil or gas, of stainless steel 3,190 N/A 3,190 3,509 3,828 4,147   7304 29 Casing and tubing, seamless, of iron or steel, of a kind used in drilling for oil or gas (excl. products of cast iron) 1,974 N/A 1,974 2,171 2,369 2,566 (C) 7304 31 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" (excl. cast iron products and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used for drilling for oil or gas) 1,974 N/A 1,974 2,171 2,369 2,566 (C) 7304 39 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, not cold-drawn or cold-rolled "cold-reduced" (excl. cast iron products, line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas) 1,974 N/A 1,974 2,171 2,369 2,566 (C) 7304 41 00 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas) 3,190 N/A 3,190 3,509 3,828 4,147   7304 49 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines or of a kind used for drilling for oil or gas) 3,190 N/A 3,190 3,509 3,828 4,147   7304 51 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil) 1,974 N/A 1,974 2,171 2,369 2,566 (F) 7304 59 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil) 1,974 N/A 1,974 2,171 2,369 2,566 (C)/(F) 7304 90 00 Tubes, pipes and hollow profiles, seamless, of non-circular cross-section, of iron or steel (excl. products of cast iron) 1,974 N/A 1,974 2,171 2,369 2,566 (C) 7305 Tubes and pipes, having circular cross-sections and an external diameter of > 406,4 mm, of flat-rolled products of iron or steel "e.g., welded, riveted or similarly closed" 1,440 N/A 1,440 1,584 1,728 1,872 (C) 7306 Tubes, pipes and hollow profiles "e.g., open seam or welded, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless tubes and pipes and tubes having internal and external circular cross-sections and an external diameter of > 406,4 mm) see below N/A see below see below see below see below   7306 11 00 Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm 3,270 N/A 3,270 3,597 3,924 4,251   7306 19 00 Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron) 1,440 N/A 1,440 1,584 1,728 1,872 (C) 7306 21 00 Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm 3,270 N/A 3,270 3,597 3,924 4,251   7306 29 00 Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron) 1,440 N/A 1,440 1,584 1,728 1,872 (C) 7306 30 12 Precision tubes, welded, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" 1,440 N/A 1,440 1,584 1,728 1,872 (C) 7306 30 18 Precision tubes, welded, of circular cross-section, of iron or non-alloy steel (excl. cold-drawn or cold-rolled) 1,400 N/A 1,400 1,540 1,680 1,820   7306 30 41 Threaded or threadable tubes "gas pipe", welded, of circular cross-section, of iron or non-alloy steel, plated or coated with zinc 1,440 N/A 1,440 1,584 1,728 1,872 (C) 7306 30 49 Threaded or threadable tubes "gas pipe", welded, of circular cross-section, of iron or non-alloy steel (excl. products plated or coated with zinc) 1,440 N/A 1,440 1,584 1,728 1,872 (C) 7306 30 72 Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel, of an external diameter of <= 168,3 mm, plated or coated with zinc (excl. line pipe of a kind used for oil or gas pipelines or casing and tubingof a kind used in drilling for oil or gas) 1,440 N/A 1,440 1,584 1,728 1,872 (C) 7306 30 77 Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel of an external diameter of <= 168,3 mm (excl. plated or coated with zinc and line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used in drilling for oil or gas, precision tubes and threaded or threadable tubes "gas pipe") 1,440 N/A 1,440 1,584 1,728 1,872 (C) 7306 30 80 Tubes, pipes and hollow profiles, welded, having a circular cross-section, of iron or steel, of an external diameter of > 168,3 mm but <= 406,4 mm (excl. line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, or precision steel tubes, electrical conduit tubes or threaded or threadable tubes "gas pipe") 1,440 N/A 1,440 1,584 1,728 1,872 (C) 7306 40 20 Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. products having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) 3,270 N/A 3,270 3,597 3,924 4,251   7306 40 80 Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel (excl. products cold-drawn or cold-rolled "cold-reduced", tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) 3,220 N/A 3,220 3,542 3,864 4,186   7306 50 21 Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" 1,480 N/A 1,480 1,628 1,776 1,924 (F) 7306 50 29 Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless (excl. cold-drawn or cold-rolled) 1,430 N/A 1,430 1,573 1,716 1,859 (F) 7306 50 80 Tubes, pipes and hollow profiles, welded, of circular cross-section, of alloy steel other than stainless (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and precision steel tubes) 1,480 N/A 1,480 1,628 1,776 1,924 (F) 7306 61 10 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel 3,270 N/A 3,270 3,597 3,924 4,251   7306 61 92 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of <= 2 mm 1,440 N/A 1,440 1,584 1,728 1,872 (C) 7306 61 99 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of > 2 mm 1,440 N/A 1,440 1,584 1,728 1,872 (C) 7306 69 10 Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) 3,270 N/A 3,270 3,597 3,924 4,251   7306 69 90 Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of iron or steel other than stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) 1,440 N/A 1,440 1,584 1,728 1,872 (C) 7306 90 00 Tubes, pipes and hollow profiles "e.g., open seam, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless or welded tubes and pipes and tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm) 1,440 N/A 1,440 1,584 1,728 1,872 (C) 7307 Tube or pipe fittings "e.g. couplings, elbows, sleeves", of iron or steel see below N/A see below see below see below see below   7307 11 Tube or pipe fittings of non-malleable cast iron 1,260 N/A 1,260 1,386 1,512 1,638   7307 19 10 Tube or pipe fittings of cast iron (excl. of non-malleable) 1,260 N/A 1,260 1,386 1,512 1,638   7307 19 90 Cast tube or pipe fittings of steel 1,330 N/A 1,330 1,463 1,596 1,729 (C) 7307 21 00 Flanges of stainless steel (excl. cast products) 2,800 N/A 2,800 3,080 3,360 3,640   7307 22 Threaded elbows, bends and sleeves of stainless steel (excl. cast products) 2,800 N/A 2,800 3,080 3,360 3,640   7307 23 Butt welding tube or pipe fittings of stainless steel (excl. cast products) 2,800 N/A 2,800 3,080 3,360 3,640   7307 29 Tube or pipe fittings of stainless steel (excl. cast products, flanges, threaded elbows, bends and sleeves and butt weldings fittings) 2,800 N/A 2,800 3,080 3,360 3,640   7307 91 00 Flanges of iron or steel (excl. cast or stainless products) 1,410 N/A 1,410 1,551 1,692 1,833 (C) 7307 92 Threaded elbows, bends and sleeves, of stainless steel (excl. cast or stainless products) 1,410 N/A 1,410 1,551 1,692 1,833 (C) 7307 93 Butt welding fittings of iron or steel (excl. cast iron or stainless steel products, and flanges) 1,410 N/A 1,410 1,551 1,692 1,833 (C) 7307 99 Tube or pipe fittings, of iron or steel (excl. cast iron or stainless steel products; flanges; threaded elbows, bends and sleeves; butt welding fittings) 1,410 N/A 1,410 1,551 1,692 1,833 (C) 7308 Structures and parts of structures "e.g., bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns", of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel (excl. prefabricated buildings of heading 9406) 2,900 N/A 2,900 3,190 3,480 3,770 (C) 7309 Reservoirs, tanks, vats and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of > 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated (excl. containers specifically constructed or equipped for one or more types of transport) 3,190 N/A 3,190 3,509 3,828 4,147 (C) 7310 Tanks, casks, drums, cans, boxes and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of <= 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated, n.e.s. 1,440 N/A 1,440 1,584 1,728 1,872 (C) 7311 Containers of iron or steel, for compressed or liquefied gas (excl. containers specifically constructed or equipped for one or more types of transport) see below N/A see below see below see below see below   7311 00 Containers of iron or steel, for compressed or liquefied gas (excl. containers specifically constructed or equipped for one or more types of transport) 3,730 N/A 3,730 4,103 4,476 4,849 (C) 7318 Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers, incl. spring washers, and similar articles, of iron or steel (excl. lag screws, stoppers, plugs and the like, threaded) see below N/A see below see below see below see below   7318 11 00 Coach screws of iron or steel 1,390 N/A 1,390 1,529 1,668 1,807 (C) 7318 12 10 Wood screws of stainless steel (excl. coach screws) 3,170 N/A 3,170 3,487 3,804 4,121 (C) 7318 12 90 Wood screws of iron or steel other than stainless (excl. coach screws) 1,390 N/A 1,390 1,529 1,668 1,807 (C) 7318 13 00 Screw hooks and screw rings, of iron or steel 1,390 N/A 1,390 1,529 1,668 1,807 (C) 7318 14 10 Self-tapping screws, of stainless steel (excl. wood screws) 3,170 N/A 3,170 3,487 3,804 4,121 (C) 7318 14 91 Spaced-thread screws of iron or steel other than stainless 1,390 N/A 1,390 1,529 1,668 1,807 (C) 7318 14 99 Self-tapping screws of iron or steel other than stainless (excl. spaced-thread screws and wood screws) 1,390 N/A 1,390 1,529 1,668 1,807 (C) 7318 15 Threaded screws and bolts, of iron or steel, whether or not with their nuts and washers (excl. coach screws and other wood screws, screw hooks and screw rings, self-tapping screws, lag screws, stoppers, plugs and the like, threaded) 2,580 N/A 2,580 2,838 3,096 3,354 (C) 7318 16 Nuts of iron or steel 3,030 N/A 3,030 3,333 3,636 3,939 (C) 7318 19 00 Threaded articles, of iron or steel, n.e.s. 1,390 N/A 1,390 1,529 1,668 1,807 (C) 7318 21 00 Spring washers and other lock washers, of iron or steel 1,390 N/A 1,390 1,529 1,668 1,807 (C) 7318 22 00 Washers of iron or steel (excl. spring washers and other lock washers) 1,830 N/A 1,830 2,013 2,196 2,379 (C) 7318 23 00 Rivets of iron or steel (excl. tubular and bifurcated rivets for particular uses) 1,680 N/A 1,680 1,848 2,016 2,184 (C) 7318 24 00 Cotters and cotter pins, of iron or steel 1,390 N/A 1,390 1,529 1,668 1,807 (C) 7318 29 00 Non-threaded articles, of iron or steel 1,390 N/A 1,390 1,529 1,668 1,807 (C) 7326 Articles of iron or steel, n.e.s. (excl. cast articles) see below N/A see below see below see below see below   7326 11 00 Grinding balls and similar articles for mills, of iron or steel, forged or stamped, but not further worked 1,330 N/A 1,330 1,463 1,596 1,729 (C) 7326 19 Articles of iron or steel, forged or stamped, but not further worked, n.e.s. (excl. grinding balls and similar articles for mills) 1,330 N/A 1,330 1,463 1,596 1,729 (C) 7326 20 00 Articles of iron or steel wire, n.e.s. 1,390 N/A 1,390 1,529 1,668 1,807 (C) 7326 90 30 Ladders and steps, of iron or steel 1,390 N/A 1,390 1,529 1,668 1,807 (C) 7326 90 40 Pallets and similar platforms for handling goods, of iron or steel 1,390 N/A 1,390 1,529 1,668 1,807 (C) 7326 90 50 Reels for cables, piping and the like, of iron or steel 1,390 N/A 1,390 1,529 1,668 1,807 (C) 7326 90 60 Ventilators, non-mechanical, guttering, hooks and like articles used in the building industry, n.e.s., of iron or steel 1,390 N/A 1,390 1,529 1,668 1,807 (C) 7326 90 92 Articles of iron or steel, open-die forged, n.e.s. 1,330 N/A 1,330 1,463 1,596 1,729 (C) 7326 90 94 Articles of iron or steel, closed-die forged, n.e.s. 1,330 N/A 1,330 1,463 1,596 1,729 (C) 7326 90 96 Sintered articles of iron or steel, n.e.s. 1,330 N/A 1,330 1,463 1,596 1,729 (C) 7326 90 98 Articles of iron or steel, n.e.s. 1,440 N/A 1,440 1,584 1,728 1,872 (C) Uruguay Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – –         2523 10 00 White clinker – – –         2523 10 00 Grey clinker 1,090 0,010 1,100 1,210 1,320 1,430 (A) 2523 21 00 White Portland cement – – –         2523 29 00 Grey Portland cement 1,090 0,020 1,110 1,221 1,332 1,443   2523 90 00 White hydraulic cements – – –         2523 90 00 Grey hydraulic cements 1,040 0,030 1,060 1,166 1,272 1,378 (A) 2523 30 00 Aluminous cement – – –         Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 1,800 0,020 1,820 1,838 1,838 1,838   2814 10 00 Anhydrous ammonia – – –         2814 20 00 Ammonia in aqueous solution 0,680 0,020 0,700 0,707 0,707 0,707   2834 21 00 Nitrate of potassium 1,610 0,040 1,650 1,667 1,667 1,667   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,500 0,020 0,530 0,535 0,535 0,535   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,830 0,020 0,860 0,869 0,869 0,869   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,520 0,060 1,580 1,596 1,596 1,596   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,480 0,060 1,550 1,566 1,566 1,566   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,660 0,050 0,710 0,717 0,717 0,717   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,150 0,060 1,210 1,222 1,222 1,222   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,230 0,040 1,270 1,283 1,283 1,283   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,890 0,060 1,950 1,970 1,970 1,970   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,630 0,060 1,690 1,707 1,707 1,707   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,630 0,060 1,690 1,707 1,707 1,707   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,810 0,040 2,850 2,879 2,879 2,879   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,580 0,060 1,640 1,656 1,656 1,656   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,320 0,050 1,380 1,394 1,394 1,394   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,460 0,060 1,520 1,535 1,535 1,535   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,690 0,050 0,740 0,747 0,747 0,747   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,820 0,060 0,880 0,889 0,889 0,889   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,560 0,050 0,610 0,616 0,616 0,616   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,530 0,040 0,570 0,576 0,576 0,576   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,340 0,030 0,370 0,374 0,374 0,374   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,120 0,080 1,200 1,212 1,212 1,212   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,610 0,080 0,680 0,687 0,687 0,687   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,080 0,050 1,130 1,141 1,141 1,141   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,560 0,030 0,590 0,596 0,596 0,596   Aluminium         10 % mark-up 20 % mark-up 30 % mark-up   7601 Unwrought aluminium 0,360 N/A 0,360 0,396 0,432 0,468 (L) 7603 Aluminium powders and flakes 2,420 N/A 2,420 2,662 2,904 3,146 (L) 7604 10 10 Bars and rods 2,640 N/A 2,640 2,904 3,168 3,432 (L) 7604 10 90 Profiles 2,660 N/A 2,660 2,926 3,192 3,458 (L) 7604 21 00 Hollow profiles 2,660 N/A 2,660 2,926 3,192 3,458 (L) 7604 29 10 Bars and rods 2,640 N/A 2,640 2,904 3,168 3,432 (L) 7604 29 90 Profiles 2,660 N/A 2,660 2,926 3,192 3,458 (L) 7605 Aluminium wire 2,640 N/A 2,640 2,904 3,168 3,432 (L) 7606 Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm 3,100 N/A 3,100 3,410 3,720 4,030 (L) 7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm 3,100 N/A 3,100 3,410 3,720 4,030 (L) 7608 Aluminium tubes and pipes 2,660 N/A 2,660 2,926 3,192 3,458 (L) 7609 00 00 Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) 2,660 N/A 2,660 2,926 3,192 3,458 (L) 7610 10 00 Doors, windows and their frames and thresholds for doors 2,660 N/A 2,660 2,926 3,192 3,458 (L) 7610 90 Other 2,660 N/A 2,660 2,926 3,192 3,458 (L) 7610 90 10 Bridges and bridge-sections, towers and lattice masts 2,660 N/A 2,660 2,926 3,192 3,458 (L) 7610 90 90 Other 2,660 N/A 2,660 2,926 3,192 3,458 (L) 7611 00 00 Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 3,100 N/A 3,100 3,410 3,720 4,030 (L) 7612 Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 3,100 N/A 3,100 3,410 3,720 4,030 (L) 7613 00 00 Aluminium containers for compressed or liquefied gas 3,100 N/A 3,100 3,410 3,720 4,030 (L) 7614 Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated 2,640 N/A 2,640 2,904 3,168 3,432 (L) 7616 10 00 Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles 3,100 N/A 3,100 3,410 3,720 4,030 (L) 7616 91 00 Cloth, grill, netting and fencing, of aluminium wire 3,100 N/A 3,100 3,410 3,720 4,030 (L) 7616 99 10 Cast 2,420 N/A 2,420 2,662 2,904 3,146 (L) 7616 99 90 Other 3,100 N/A 3,100 3,410 3,720 4,030 (L) Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066   Uzbekistan Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – – – –   2523 10 00 White clinker – – – – – –   2523 10 00 Grey clinker 1,360 0,030 1,390 1,529 1,668 1,807 (A) 2523 21 00 White Portland cement – – – – – –   2523 29 00 Grey Portland cement 1,360 0,060 1,410 1,551 1,692 1,833   2523 90 00 White hydraulic cements – – – – – –   2523 90 00 Grey hydraulic cements 1,290 0,060 1,350 1,485 1,620 1,755 (A) 2523 30 00 Aluminous cement – – – – – –   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 2,730 0,040 2,770 2,798 2,798 2,798   2814 10 00 Anhydrous ammonia 2,160 0,140 2,300 2,323 2,323 2,323   2814 20 00 Ammonia in aqueous solution 0,650 0,040 0,690 0,697 0,697 0,697   2834 21 00 Nitrate of potassium 2,210 0,060 2,270 2,293 2,293 2,293   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,490 0,040 0,520 0,525 0,525 0,525   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,810 0,040 0,840 0,848 0,848 0,848   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,470 0,100 1,570 1,586 1,586 1,586   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,440 0,100 1,540 1,555 1,555 1,555   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,640 0,080 0,710 0,717 0,717 0,717   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,420 0,090 1,500 1,515 1,515 1,515   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,670 0,070 1,740 1,757 1,757 1,757   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,570 0,100 2,670 2,697 2,697 2,697   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,200 0,090 2,300 2,323 2,323 2,323   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,200 0,090 2,300 2,323 2,323 2,323   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 4,260 0,070 4,330 4,373 4,373 4,373   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,150 0,090 2,240 2,262 2,262 2,262   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,610 0,080 1,700 1,717 1,717 1,717   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,660 0,100 1,750 1,768 1,768 1,768   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,820 0,080 0,890 0,899 0,899 0,899   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,080 0,090 1,170 1,182 1,182 1,182   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,730 0,070 0,800 0,808 0,808 0,808   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,510 0,060 0,570 0,576 0,576 0,576   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,320 0,050 0,370 0,374 0,374 0,374   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,480 0,120 1,600 1,616 1,616 1,616   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,590 0,100 0,690 0,697 0,697 0,697   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,450 0,070 1,520 1,535 1,535 1,535   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,740 0,050 0,790 0,798 0,798 0,798   Aluminium         10 % mark-up 20 % mark-up 30 % mark-up   7601 Unwrought aluminium 0,360 N/A 0,360 0,396 0,432 0,468 (L) 7603 Aluminium powders and flakes 1,060 N/A 1,060 1,166 1,272 1,378 (L) 7604 10 10 Bars and rods 1,290 N/A 1,290 1,419 1,548 1,677 (L) 7604 10 90 Profiles 1,300 N/A 1,300 1,430 1,560 1,690 (L) 7604 21 00 Hollow profiles 1,300 N/A 1,300 1,430 1,560 1,690 (L) 7604 29 10 Bars and rods 1,290 N/A 1,290 1,419 1,548 1,677 (L) 7604 29 90 Profiles 1,300 N/A 1,300 1,430 1,560 1,690 (L) 7605 Aluminium wire 1,290 N/A 1,290 1,419 1,548 1,677 (L) 7606 Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm 1,740 N/A 1,740 1,914 2,088 2,262 (L) 7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm 1,740 N/A 1,740 1,914 2,088 2,262 (L) 7608 Aluminium tubes and pipes 1,300 N/A 1,300 1,430 1,560 1,690 (L) 7609 00 00 Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) 1,300 N/A 1,300 1,430 1,560 1,690 (L) 7610 10 00 Doors, windows and their frames and thresholds for doors 1,300 N/A 1,300 1,430 1,560 1,690 (L) 7610 90 Other 1,300 N/A 1,300 1,430 1,560 1,690 (L) 7610 90 10 Bridges and bridge-sections, towers and lattice masts 1,300 N/A 1,300 1,430 1,560 1,690 (L) 7610 90 90 Other 1,300 N/A 1,300 1,430 1,560 1,690 (L) 7611 00 00 Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 1,740 N/A 1,740 1,914 2,088 2,262 (L) 7612 Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 1,740 N/A 1,740 1,914 2,088 2,262 (L) 7613 00 00 Aluminium containers for compressed or liquefied gas 1,740 N/A 1,740 1,914 2,088 2,262 (L) 7614 Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated 1,290 N/A 1,290 1,419 1,548 1,677 (L) 7616 10 00 Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles 1,740 N/A 1,740 1,914 2,088 2,262 (L) 7616 91 00 Cloth, grill, netting and fencing, of aluminium wire 1,740 N/A 1,740 1,914 2,088 2,262 (L) 7616 99 10 Cast 1,060 N/A 1,060 1,166 1,272 1,378 (L) 7616 99 90 Other 1,740 N/A 1,740 1,914 2,088 2,262 (L) Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066   Iron and steel         10 % mark-up 20 % mark-up 30 % mark-up   2601 12 00 Agglomerated iron ores and concentrates (excl. roasted iron pyrites) 0,390 0,350 0,740 0,814 0,888 0,962   7201 Pig iron and spiegeleisen, in pigs, blocks or other primary forms – N/A – – – –   7202 11 Ferro-manganese, containing by weight > 2% of carbon – N/A – – – –   7202 19 Ferro-manganese, containing by weight <= 2% carbon – N/A – – – –   7202 41 Ferro-chromium, containing by weight > 4% of carbon 2,350 N/A 2,350 2,585 2,820 3,055   7202 49 Ferro-chromium, containing by weight <= 4% of carbon – N/A – – – –   7202 60 00 Ferro-nickel – N/A – – – –   7203 Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99,94%, in lumps, pellets or similar forms – N/A – – – –   7205 Granules and powders of pig iron, spiegeleisen, iron or steel (excl. granules and powders of ferro-alloys, turnings and filings of iron or steel, radioactive iron powders "isotopes" and certain low-calibre, substandard balls for ballbearings) 3,670 N/A 3,670 4,037 4,404 4,771 (E) 7206 Iron and non-alloy steel in ingots or other primary forms (excl. remelting scrap ingots, products obtained by continuous casting and iron of heading 7203) see below N/A see below see below see below see below   7206 10 00 Ingots, of iron and non-alloy steel (excl. remelted scrap ingots, continuous cast products, iron of heading 7203) 3,150 N/A 3,150 3,465 3,780 4,095 (E) 7206 90 00 Iron and non-alloy steel, in puddled bars or other primary forms (excl. ingots, remelted scrap ingots, continuous cast products, iron of heading 7203) 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7207 Semi-finished products of iron or non-alloy steel see below N/A see below see below see below see below   7207 11 11 Semi-finished products, of non-alloy free-cutting steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7207 11 14 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness of <= 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel) 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7207 11 16 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness of > 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel) 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7207 11 90 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular cross-section, the width < twice the thickness, forged 3,150 N/A 3,150 3,465 3,780 4,095 (E) 7207 12 10 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtained by continuous casting 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7207 12 90 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular "other than square" cross-section, the width >= twice the thickness, forged 3,150 N/A 3,150 3,465 3,780 4,095 (E) 7207 19 12 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7207 19 19 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, forged 3,150 N/A 3,150 3,465 3,780 4,095 (E) 7207 19 80 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon (excl. semi-products, of square, rectangular, circular or polygonal cross-section) 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7207 20 11 Semi-finished products, of non-alloy free-cutting steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7207 20 15 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% but < 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel) 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7207 20 17 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel) 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7207 20 19 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, forged 3,150 N/A 3,150 3,465 3,780 4,095 (E) 7207 20 32 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtained by continuous casting 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7207 20 39 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of rectangular "other than square" cross-section and the width >= twice the thickness, forged 3,150 N/A 3,150 3,465 3,780 4,095 (E) 7207 20 52 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7207 20 59 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of circular or polygonal cross-section, forged 3,150 N/A 3,150 3,465 3,780 4,095 (E) 7207 20 80 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon (excl. those of square, rectangular, circular or polygonal cross-section) 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7208 Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled, not clad, plated or coated 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7209 Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, cold-rolled "cold-reduced", not clad, plated or coated 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7210 Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7211 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", not clad, plated or coated see below N/A see below see below see below see below   7211 13 00 Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as "wide flats" 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7211 14 00 Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, not further worked than hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm (excl. "wide flats") 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7211 19 00 Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, simply hot-rolled, not clad, plated or coated, of a thickness < 4,75 mm (excl. "wide flats") 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7211 23 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight < 0,25% of carbon 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7211 29 00 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight >= 0,25% of carbon 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7211 90 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked, but not clad, plated or coated 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7212 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7213 Bars and rods of iron or non-alloy steel, hot-rolled, in irregularly wound coils 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7214 Bars and rods, of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but incl. those twisted after rolling (excl. in irregularly wound coils) see below N/A see below see below see below see below   7214 10 00 Bars and rods, of iron or non-alloy steel, not further worked than forged (excl. in irregularly wound coils) 3,150 N/A 3,150 3,465 3,780 4,095 (E) 7214 20 00 Bars and rods, of iron or non-alloy steel, with indentations, ribs, groves or other deformations produced during the rolling process 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7214 30 00 Bars and rods, of non-alloy free-cutting steel, not further worked than hot-rolled, hot-drawn or hot-extruded (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling) 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7214 91 Bars and rods, of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, of rectangular "other than square" cross-section (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process, bars and rods twisted after rolling and free-cutting steel) 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7214 99 Bars and rods, of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded (excl. of rectangular [other than square] cross-section and those containing indentations, ribs, grooves or other deformations produced during the rolling process, and of non-alloy free-cutting steel) 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7215 Bars and rods, of iron or non-alloy steel, cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked, n.e.s. 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7216 Angles, shapes and sections of iron or non-alloy steel, n.e.s. 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7217 Wire of iron or non-alloy steel, in coils (excl. bars and rods) see below N/A see below see below see below see below   7217 10 Wire of iron or non-alloy steel, in coils, not plated or coated, whether or not polished (excl. bars and rods) 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7217 20 Wire of iron or non-alloy steel, in coils, plated or coated with zinc (excl. bars and rods) 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7217 30 Wire of iron or non-alloy steel, in coils, plated or coated with base metals (excl. plated or coated with zinc, and bars and rods) 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7217 90 Wire of iron or non-alloy steel, in coils, plated or coated (excl. plated or coated with base metals, and bars and rods) 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7218 Stainless steel in ingots or other primary forms (excl. remelting scrap ingots and products obtained by continuous casting); semi-finished products of stainless steel see below N/A see below see below see below see below   7218 10 00 Steel, stainless, in ingots and other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) 3,050 N/A 3,050 3,355 3,660 3,965   7218 91 Semi-finished products of stainless steel, of rectangular "other than square" cross-section 3,120 N/A 3,120 3,432 3,744 4,056   7218 99 11 Semi-finished products of stainless steel, of square cross-section, rolled or obtained by continuous casting 3,120 N/A 3,120 3,432 3,744 4,056   7218 99 19 Semi-finished products of stainless steel, of square cross-section, forged 3,050 N/A 3,050 3,355 3,660 3,965   7218 99 20 Semi-finished products of stainless steel, of circular cross-section or of cross-section other than square or rectangular, rolled or obtained by continuous casting 3,120 N/A 3,120 3,432 3,744 4,056   7218 99 80 Semi-finished products of stainless steel, forged (excl. products of square or rectangular cross-section) 3,050 N/A 3,050 3,355 3,660 3,965   7219 Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" see below N/A see below see below see below see below   7219 11 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of > 10 mm 3,120 N/A 3,120 3,432 3,744 4,056   7219 12 Flat-rolled products of stainless steel, of a width of>= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 4,7 mm and <= 10 mm 3,120 N/A 3,120 3,432 3,744 4,056   7219 13 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 3 mm and < 4,75 mm 3,120 N/A 3,120 3,432 3,744 4,056   7219 14 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of < 3 mm 3,120 N/A 3,120 3,432 3,744 4,056   7219 21 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of > 10 mm 3,120 N/A 3,120 3,432 3,744 4,056   7219 22 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 4,75 mm and <= 10 mm 3,120 N/A 3,120 3,432 3,744 4,056   7219 23 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 3 mm and < 4,75 mm 3,120 N/A 3,120 3,432 3,744 4,056   7219 24 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of < 3 mm 3,120 N/A 3,120 3,432 3,744 4,056   7219 31 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 4,75 mm 3,120 N/A 3,120 3,432 3,744 4,056   7219 32 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 3 mm but < 4,75 mm 3,120 N/A 3,120 3,432 3,744 4,056   7219 33 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of > 1 mm but < 3 mm 3,120 N/A 3,120 3,432 3,744 4,056   7219 34 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 0,5 mm but <= 1 mm 3,120 N/A 3,120 3,432 3,744 4,056   7219 35 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of < 0,5 mm 3,120 N/A 3,120 3,432 3,744 4,056   7219 90 Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked 3,120 N/A 3,120 3,432 3,744 4,056   7220 Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" see below N/A see below see below see below see below   7220 11 00 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of >= 4,75 mm 3,120 N/A 3,120 3,432 3,744 4,056   7220 12 00 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of < 4,75 mm 3,120 N/A 3,120 3,432 3,744 4,056   7220 20 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" 3,120 N/A 3,120 3,432 3,744 4,056   7220 90 Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked 3,120 N/A 3,120 3,432 3,744 4,056   7221 Bars and rods of stainless steel, hot-rolled, in irregularly wound coils 3,120 N/A 3,120 3,432 3,744 4,056   7222 Other bars and rods of stainless steel; angles, shapes and sections of stainless steel, n.e.s. see below N/A see below see below see below see below   7222 11 Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only hot-extruded, of circular cross-section 3,120 N/A 3,120 3,432 3,744 4,056   7222 19 Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only extruded (excl. of circular cross-section) 3,120 N/A 3,120 3,432 3,744 4,056   7222 20 Other bars and rods of stainless steel, not further worked than cold-formed or cold-finished 3,120 N/A 3,120 3,432 3,744 4,056   7222 30 Other bars and rods of stainless steel, cold-formed or cold-finished and further worked, or not further worked than forged, or forged, or hot-formed by other means and further worked, n.e.s. 3,050 N/A 3,050 3,355 3,660 3,965   7222 40 Angles, shapes and sections of stainless steel, n.e.s. 3,120 N/A 3,120 3,432 3,744 4,056   7223 Wire of stainless steel, in coils (excl. bars and rods) see below N/A see below see below see below see below   7223 00 Wire of stainless steel, in coils (excl. bars and rods) 3,120 N/A 3,120 3,432 3,744 4,056   7224 Steel, alloy, other than stainless, in ingots or other primary forms, semi-finished products of alloy steel other than stainless (excl. waste and scrap in ingot form, and products obtained by continuous casting) see below N/A see below see below see below see below   7224 10 Steel, alloy, other than stainless, in ingots or other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) 3,190 N/A 3,190 3,509 3,828 4,147 (H) 7224 90 02 Semi-finished products of tool steel 3,260 N/A 3,260 3,586 3,912 4,238 (H) 7224 90 03 Semi-finished products of high-speed steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting the width measuring < twice the thickness 3,260 N/A 3,260 3,586 3,912 4,238 (H) 7224 90 05 Semi-finished products of steel containing by weight <= 0,7% of carbon, 0,5% to 1,2% of manganese, 0,6% to 2,3% of silicon, or of steel containing by weight >= 0,0008% of boron with any other element < the minimum content referred to in Note 1 f to chapter 72, of square or rectangular cross-section, hot rolled or obtained by continuous casting, the width measuring < twice the thickness 3,260 N/A 3,260 3,586 3,912 4,238 (H) 7224 90 07 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring < twice the thickness (excl. of tool steel, high-speed steel and articles of subheading 7224.90.05) 3,260 N/A 3,260 3,586 3,912 4,238 (H) 7224 90 14 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring >= twice the thickness (excl. of tool steel) 3,260 N/A 3,260 3,586 3,912 4,238 (H) 7224 90 18 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, forged (excl. of tool steel) 3,190 N/A 3,190 3,509 3,828 4,147 (H) 7224 90 31 Semi-finished products of steel containing by weight 0,9% to 1,15% carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting 3,260 N/A 3,260 3,586 3,912 4,238 (H) 7224 90 38 Semi-finished products of alloy steel, other than stainless steel, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting (excl. of tool steel and products containing by weight 0,9% to 1,15% of carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum) 3,260 N/A 3,260 3,586 3,912 4,238 (H) 7224 90 90 Semi-finished products of alloy steel, other than stainless steel, forged (excl. of tool steel and products of square or rectangular, circular or polygamol cross-section) 3,190 N/A 3,190 3,509 3,828 4,147 (H) 7225 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" see below N/A see below see below see below see below   7225 11 00 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, grain-oriented 4,930 N/A 4,930 5,423 5,916 6,409 (E) 7225 19 10 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, hot-rolled 3,260 N/A 3,260 3,586 3,912 4,238 (E) 7225 19 90 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, cold-rolled "cold-reduced", non-grain-oriented 3,260 N/A 3,260 3,586 3,912 4,238 (H) 7225 30 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, in coils (excl. products of silicon-electrical steel) 3,260 N/A 3,260 3,586 3,912 4,238 (H) 7225 40 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, not in coils (excl. products of silicon-electrical steel) 3,260 N/A 3,260 3,586 3,912 4,238 (H) 7225 50 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of silicon-electrical steel) 3,260 N/A 3,260 3,586 3,912 4,238 (H) 7225 91 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and electrolytically plated or coated with zinc (excl. products of silicon-electrical steel) 3,260 N/A 3,260 3,586 3,912 4,238 (H) 7225 92 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and plated or coated with zinc (excl. electrolytically plated or coated and products of silicon-electrical steel) 3,260 N/A 3,260 3,586 3,912 4,238 (H) 7225 99 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. plated or coated with zinc and products of silicon-electrical steel) 3,260 N/A 3,260 3,586 3,912 4,238 (H) 7226 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" see below N/A see below see below see below see below   7226 11 00 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", grain-oriented 4,930 N/A 4,930 5,423 5,916 6,409 (E) 7226 19 10 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, not further worked than hot-rolled 3,260 N/A 3,260 3,586 3,912 4,238 (E) 7226 19 80 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, cold-rolled "cold-reduced", whether or not further worked, or hot-rolled and further worked, non-grain-oriented 3,260 N/A 3,260 3,586 3,912 4,238 (H) 7226 20 00 Flat-rolled products of high-speed steel, of a width of <= 600 mm, hot-rolled or cold-rolled "cold-reduced" 3,260 N/A 3,260 3,586 3,912 4,238 (H) 7226 91 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than hot-rolled (excl. products of high-speed steel or silicon-electrical steel) 3,260 N/A 3,260 3,586 3,912 4,238 (H) 7226 92 00 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of high-speed steel or silicon-electrical steel) 3,260 N/A 3,260 3,586 3,912 4,238 (H) 7226 99 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. products of high-speed steel or silicon-electrical steel) 3,260 N/A 3,260 3,586 3,912 4,238 (H) 7227 Bars and rods of alloy steel other than stainless, hot-rolled, in irregularly wound coils 3,260 N/A 3,260 3,586 3,912 4,238 (E)/(H) 7228 Other bars and rods of alloy steel other than stainless, angles, shapes and sections of alloy steel other than stainless, n.e.s.; hollow drill bars and rods, of alloy or non-alloy steel see below N/A see below see below see below see below   7228 10 20 Bars and rods of high-speed steel, not further worked than hot-rolled, hot-drawn or extruded, and hot-rolled, hot-drawn or extruded, not further worked than clad (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,260 N/A 3,260 3,586 3,912 4,238 (H) 7228 10 50 Bars and rods of high-speed steel, forged (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,190 N/A 3,190 3,509 3,828 4,147 (H) 7228 10 90 Bars and rods of high-speed steel, not further worked than cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked (excl. forged products, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,260 N/A 3,260 3,586 3,912 4,238 (H) 7228 20 Bars and rods of silico-manganese steel (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,260 N/A 3,260 3,586 3,912 4,238 (H) 7228 30 Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,260 N/A 3,260 3,586 3,912 4,238 (E)/(H) 7228 40 Bars and rods of alloy steel other than stainless, not further worked than forged (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,190 N/A 3,190 3,509 3,828 4,147 (H) 7228 50 Bars and rods of alloy steel other than stainless, not further worked than cold-formed or cold-finished (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,260 N/A 3,260 3,586 3,912 4,238 (E)/(H) 7228 60 Bars and rods of alloy steel other than stainless, cold-formed or cold-finished and further worked or hot-formed and further worked, n.e.s. (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,260 N/A 3,260 3,586 3,912 4,238 (H) 7228 70 Angles, shapes and sections of alloy steel other than stainless, n.e.s. 3,260 N/A 3,260 3,586 3,912 4,238 (H) 7228 80 00 Hollow drill bars and rods, of alloy or non-alloy steel 3,260 N/A 3,260 3,586 3,912 4,238 (H) 7229 Wire of alloy steel other than stainless, in coils (excl. bars and rods) 3,260 N/A 3,260 3,586 3,912 4,238 (E)/(H) 7301 Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7302 Railway or tramway track construction material of iron or steel, the following : rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers "cross-ties", fish-plates, chairs, chair wedges, sole plates "base plates", rail clips, bedplates, ties and other material specialised for jointing or fixing rails 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7303 Tubes, pipes and hollow profiles, of cast iron see below N/A see below see below see below see below   7303 00 Tubes, pipes and hollow profiles, of cast iron 3,730 N/A 3,730 4,103 4,476 4,849   7304 Tubes, pipes and hollow profiles, seamless, of iron or steel (excl. products of cast iron) see below N/A see below see below see below see below   7304 11 00 Line pipe of a kind used for oil or gas pipelines, seamless, of stainless steel 3,120 N/A 3,120 3,432 3,744 4,056   7304 19 Line pipe of a kind used for oil or gas pipelines, seamless, of iron or steel (excl. products of stainless steel or of cast iron) 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7304 22 00 Drill pipe, seamless, of stainless steel, of a kind used in drilling for oil or gas 3,120 N/A 3,120 3,432 3,744 4,056   7304 23 00 Drill pipe, seamless, of a kind used in drilling for oil or gas, of iron or steel (excl. products of stainless steel or of cast iron) 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7304 24 00 Casing and tubing, seamless, of a kind used for drilling for oil or gas, of stainless steel 3,120 N/A 3,120 3,432 3,744 4,056   7304 29 Casing and tubing, seamless, of iron or steel, of a kind used in drilling for oil or gas (excl. products of cast iron) 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7304 31 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" (excl. cast iron products and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used for drilling for oil or gas) 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7304 39 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, not cold-drawn or cold-rolled "cold-reduced" (excl. cast iron products, line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas) 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7304 41 00 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas) 3,120 N/A 3,120 3,432 3,744 4,056   7304 49 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines or of a kind used for drilling for oil or gas) 3,120 N/A 3,120 3,432 3,744 4,056   7304 51 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil) 3,200 N/A 3,200 3,520 3,840 4,160 (H) 7304 59 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil) 3,200 N/A 3,200 3,520 3,840 4,160 (E)/(H) 7304 90 00 Tubes, pipes and hollow profiles, seamless, of non-circular cross-section, of iron or steel (excl. products of cast iron) 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7305 Tubes and pipes, having circular cross-sections and an external diameter of > 406,4 mm, of flat-rolled products of iron or steel "e.g., welded, riveted or similarly closed" 3,200 N/A 3,200 3,520 3,840 4,160 (E) 7306 Tubes, pipes and hollow profiles "e.g., open seam or welded, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless tubes and pipes and tubes having internal and external circular cross-sections and an external diameter of > 406,4 mm) see below N/A see below see below see below see below   7306 11 00 Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm 3,120 N/A 3,120 3,432 3,744 4,056   7306 19 00 Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron) 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7306 21 00 Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm 3,120 N/A 3,120 3,432 3,744 4,056   7306 29 00 Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron) 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7306 30 12 Precision tubes, welded, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7306 30 18 Precision tubes, welded, of circular cross-section, of iron or non-alloy steel (excl. cold-drawn or cold-rolled) 3,210 N/A 3,210 3,531 3,852 4,173   7306 30 41 Threaded or threadable tubes "gas pipe", welded, of circular cross-section, of iron or non-alloy steel, plated or coated with zinc 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7306 30 49 Threaded or threadable tubes "gas pipe", welded, of circular cross-section, of iron or non-alloy steel (excl. products plated or coated with zinc) 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7306 30 72 Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel, of an external diameter of <= 168,3 mm, plated or coated with zinc (excl. line pipe of a kind used for oil or gas pipelines or casing and tubingof a kind used in drilling for oil or gas) 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7306 30 77 Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel of an external diameter of <= 168,3 mm (excl. plated or coated with zinc and line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used in drilling for oil or gas, precision tubes and threaded or threadable tubes "gas pipe") 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7306 30 80 Tubes, pipes and hollow profiles, welded, having a circular cross-section, of iron or steel, of an external diameter of > 168,3 mm but <= 406,4 mm (excl. line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, or precision steel tubes, electrical conduit tubes or threaded or threadable tubes "gas pipe") 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7306 40 20 Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. products having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) 3,120 N/A 3,120 3,432 3,744 4,056   7306 40 80 Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel (excl. products cold-drawn or cold-rolled "cold-reduced", tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) 3,120 N/A 3,120 3,432 3,744 4,056   7306 50 21 Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" 3,210 N/A 3,210 3,531 3,852 4,173 (H) 7306 50 29 Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless (excl. cold-drawn or cold-rolled) 3,210 N/A 3,210 3,531 3,852 4,173 (H) 7306 50 80 Tubes, pipes and hollow profiles, welded, of circular cross-section, of alloy steel other than stainless (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and precision steel tubes) 3,210 N/A 3,210 3,531 3,852 4,173 (H) 7306 61 10 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel 3,120 N/A 3,120 3,432 3,744 4,056   7306 61 92 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of <= 2 mm 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7306 61 99 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of > 2 mm 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7306 69 10 Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) 3,120 N/A 3,120 3,432 3,744 4,056   7306 69 90 Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of iron or steel other than stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7306 90 00 Tubes, pipes and hollow profiles "e.g., open seam, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless or welded tubes and pipes and tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm) 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7307 Tube or pipe fittings "e.g. couplings, elbows, sleeves", of iron or steel see below N/A see below see below see below see below   7307 11 Tube or pipe fittings of non-malleable cast iron 3,670 N/A 3,670 4,037 4,404 4,771   7307 19 10 Tube or pipe fittings of cast iron (excl. of non-malleable) 3,670 N/A 3,670 4,037 4,404 4,771   7307 19 90 Cast tube or pipe fittings of steel 3,150 N/A 3,150 3,465 3,780 4,095 (E) 7307 21 00 Flanges of stainless steel (excl. cast products) 3,210 N/A 3,210 3,531 3,852 4,173   7307 22 Threaded elbows, bends and sleeves of stainless steel (excl. cast products) 3,210 N/A 3,210 3,531 3,852 4,173   7307 23 Butt welding tube or pipe fittings of stainless steel (excl. cast products) 3,210 N/A 3,210 3,531 3,852 4,173   7307 29 Tube or pipe fittings of stainless steel (excl. cast products, flanges, threaded elbows, bends and sleeves and butt weldings fittings) 3,210 N/A 3,210 3,531 3,852 4,173   7307 91 00 Flanges of iron or steel (excl. cast or stainless products) 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7307 92 Threaded elbows, bends and sleeves, of stainless steel (excl. cast or stainless products) 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7307 93 Butt welding fittings of iron or steel (excl. cast iron or stainless steel products, and flanges) 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7307 99 Tube or pipe fittings, of iron or steel (excl. cast iron or stainless steel products; flanges; threaded elbows, bends and sleeves; butt welding fittings) 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7308 Structures and parts of structures "e.g., bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns", of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel (excl. prefabricated buildings of heading 9406) 3,010 N/A 3,010 3,311 3,612 3,913 (E) 7309 Reservoirs, tanks, vats and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of > 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated (excl. containers specifically constructed or equipped for one or more types of transport) 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7310 Tanks, casks, drums, cans, boxes and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of <= 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated, n.e.s. 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7311 Containers of iron or steel, for compressed or liquefied gas (excl. containers specifically constructed or equipped for one or more types of transport) see below N/A see below see below see below see below   7311 00 Containers of iron or steel, for compressed or liquefied gas (excl. containers specifically constructed or equipped for one or more types of transport) 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7318 Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers, incl. spring washers, and similar articles, of iron or steel (excl. lag screws, stoppers, plugs and the like, threaded) see below N/A see below see below see below see below   7318 11 00 Coach screws of iron or steel 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7318 12 10 Wood screws of stainless steel (excl. coach screws) 3,120 N/A 3,120 3,432 3,744 4,056 (E) 7318 12 90 Wood screws of iron or steel other than stainless (excl. coach screws) 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7318 13 00 Screw hooks and screw rings, of iron or steel 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7318 14 10 Self-tapping screws, of stainless steel (excl. wood screws) 3,120 N/A 3,120 3,432 3,744 4,056 (E) 7318 14 91 Spaced-thread screws of iron or steel other than stainless 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7318 14 99 Self-tapping screws of iron or steel other than stainless (excl. spaced-thread screws and wood screws) 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7318 15 Threaded screws and bolts, of iron or steel, whether or not with their nuts and washers (excl. coach screws and other wood screws, screw hooks and screw rings, self-tapping screws, lag screws, stoppers, plugs and the like, threaded) 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7318 16 Nuts of iron or steel 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7318 19 00 Threaded articles, of iron or steel, n.e.s. 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7318 21 00 Spring washers and other lock washers, of iron or steel 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7318 22 00 Washers of iron or steel (excl. spring washers and other lock washers) 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7318 23 00 Rivets of iron or steel (excl. tubular and bifurcated rivets for particular uses) 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7318 24 00 Cotters and cotter pins, of iron or steel 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7318 29 00 Non-threaded articles, of iron or steel 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7326 Articles of iron or steel, n.e.s. (excl. cast articles) see below N/A see below see below see below see below   7326 11 00 Grinding balls and similar articles for mills, of iron or steel, forged or stamped, but not further worked 3,150 N/A 3,150 3,465 3,780 4,095 (E) 7326 19 Articles of iron or steel, forged or stamped, but not further worked, n.e.s. (excl. grinding balls and similar articles for mills) 3,150 N/A 3,150 3,465 3,780 4,095 (E) 7326 20 00 Articles of iron or steel wire, n.e.s. 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7326 90 30 Ladders and steps, of iron or steel 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7326 90 40 Pallets and similar platforms for handling goods, of iron or steel 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7326 90 50 Reels for cables, piping and the like, of iron or steel 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7326 90 60 Ventilators, non-mechanical, guttering, hooks and like articles used in the building industry, n.e.s., of iron or steel 3,210 N/A 3,210 3,531 3,852 4,173 (E) 7326 90 92 Articles of iron or steel, open-die forged, n.e.s. 3,150 N/A 3,150 3,465 3,780 4,095 (E) 7326 90 94 Articles of iron or steel, closed-die forged, n.e.s. 3,150 N/A 3,150 3,465 3,780 4,095 (E) 7326 90 96 Sintered articles of iron or steel, n.e.s. 3,150 N/A 3,150 3,465 3,780 4,095 (E) 7326 90 98 Articles of iron or steel, n.e.s. 3,210 N/A 3,210 3,531 3,852 4,173 (E) Venezuela Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – –         2523 10 00 White clinker 1,320 0,030 1,340 1,474 1,608 1,742 (B) 2523 10 00 Grey clinker 1,080 0,020 1,100 1,210 1,320 1,430 (A) 2523 21 00 White Portland cement 1,240 0,120 1,360 1,496 1,632 1,768   2523 29 00 Grey Portland cement 1,080 0,030 1,110 1,221 1,332 1,443   2523 90 00 White hydraulic cements 1,280 0,140 1,420 1,562 1,704 1,846 (B) 2523 90 00 Grey hydraulic cements 1,030 0,040 1,060 1,166 1,272 1,378 (A) 2523 30 00 Aluminous cement – – –         Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 1,800 0,020 1,830 1,848 1,848 1,848   2814 10 00 Anhydrous ammonia 2,260 0,070 2,330 2,353 2,353 2,353   2814 20 00 Ammonia in aqueous solution 0,680 0,020 0,700 0,707 0,707 0,707   2834 21 00 Nitrate of potassium 1,620 0,040 1,650 1,667 1,667 1,667   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,500 0,020 0,520 0,525 0,525 0,525   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,840 0,020 0,860 0,869 0,869 0,869   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,520 0,060 1,580 1,596 1,596 1,596   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,490 0,060 1,540 1,555 1,555 1,555   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,660 0,050 0,710 0,717 0,717 0,717   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,160 0,050 1,210 1,222 1,222 1,222   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,230 0,040 1,270 1,283 1,283 1,283   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,890 0,060 1,950 1,970 1,970 1,970   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,630 0,060 1,690 1,707 1,707 1,707   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,630 0,060 1,690 1,707 1,707 1,707   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,820 0,040 2,850 2,879 2,879 2,879   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,580 0,050 1,640 1,656 1,656 1,656   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,330 0,050 1,370 1,384 1,384 1,384   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,460 0,060 1,520 1,535 1,535 1,535   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,690 0,050 0,740 0,747 0,747 0,747   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,820 0,060 0,880 0,889 0,889 0,889   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,560 0,050 0,610 0,616 0,616 0,616   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,530 0,040 0,570 0,576 0,576 0,576   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,340 0,030 0,370 0,374 0,374 0,374   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,120 0,070 1,200 1,212 1,212 1,212   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,610 0,070 0,680 0,687 0,687 0,687   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,090 0,040 1,130 1,141 1,141 1,141   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,560 0,030 0,590 0,596 0,596 0,596   Aluminium         10 % mark-up 20 % mark-up 30 % mark-up   7601 Unwrought aluminium 1,700 N/A 1,700 1,870 2,040 2,210 (K) 7603 Aluminium powders and flakes 1,810 N/A 1,810 1,991 2,172 2,353 (K) 7604 10 10 Bars and rods 2,040 N/A 2,040 2,244 2,448 2,652 (K) 7604 10 90 Profiles 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7604 21 00 Hollow profiles 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7604 29 10 Bars and rods 2,040 N/A 2,040 2,244 2,448 2,652 (K) 7604 29 90 Profiles 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7605 Aluminium wire 2,040 N/A 2,040 2,244 2,448 2,652 (K) 7606 Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7608 Aluminium tubes and pipes 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7609 00 00 Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7610 10 00 Doors, windows and their frames and thresholds for doors 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7610 90 Other 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7610 90 10 Bridges and bridge-sections, towers and lattice masts 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7610 90 90 Other 2,050 N/A 2,050 2,255 2,460 2,665 (K) 7611 00 00 Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7612 Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7613 00 00 Aluminium containers for compressed or liquefied gas 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7614 Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated 2,040 N/A 2,040 2,244 2,448 2,652 (K) 7616 10 00 Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7616 91 00 Cloth, grill, netting and fencing, of aluminium wire 2,490 N/A 2,490 2,739 2,988 3,237 (K) 7616 99 10 Cast 1,810 N/A 1,810 1,991 2,172 2,353 (K) 7616 99 90 Other 2,490 N/A 2,490 2,739 2,988 3,237 (K) Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066   Iron and steel         10 % mark-up 20 % mark-up 30 % mark-up   7202 11 Ferro-manganese, containing by weight > 2% of carbon 1,690 N/A 1,690 1,859 2,028 2,197   7202 19 Ferro-manganese, containing by weight <= 2% carbon _ _ _ _ _ _   7202 41 Ferro-chromium, containing by weight > 4% of carbon _ _ _ _ _ _   7202 49 Ferro-chromium, containing by weight <= 4% of carbon _ _ _ _ _ _   7202 60 00 Ferro-nickel 3,480 N/A 3,480 3,828 4,176 4,524   Vietnam Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 2,410 0,050 2,460 2,485 2,485 2,485   2814 10 00 Anhydrous ammonia 3,460 0,150 3,610 3,646 3,646 3,646   2814 20 00 Ammonia in aqueous solution 1,040 0,050 1,080 1,091 1,091 1,091   2834 21 00 Nitrate of potassium 2,240 0,070 2,310 2,333 2,333 2,333   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,770 0,040 0,810 0,818 0,818 0,818   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 1,270 0,040 1,310 1,323 1,323 1,323   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 2,310 0,120 2,430 2,454 2,454 2,454   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 2,260 0,120 2,380 2,404 2,404 2,404   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,010 0,090 1,100 1,111 1,111 1,111   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,660 0,100 1,760 1,778 1,778 1,778   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,710 0,080 1,780 1,798 1,798 1,798   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,630 0,120 2,750 2,778 2,778 2,778   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,280 0,110 2,380 2,404 2,404 2,404   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,280 0,110 2,380 2,404 2,404 2,404   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 3,760 0,080 3,840 3,878 3,878 3,878   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,210 0,100 2,310 2,333 2,333 2,333   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,900 0,090 2 2,020 2,020 2,020   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 2,140 0,110 2,260 2,283 2,283 2,283   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 1 0,090 1,090 1,101 1,101 1,101   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,160 0,110 1,270 1,283 1,283 1,283   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,790 0,080 0,880 0,889 0,889 0,889   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,810 0,070 0,880 0,889 0,889 0,889   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,520 0,050 0,570 0,576 0,576 0,576   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,570 0,140 1,710 1,727 1,727 1,727   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,930 0,130 1,060 1,071 1,071 1,071   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,520 0,080 1,600 1,616 1,616 1,616   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,790 0,060 0,850 0,859 0,859 0,859   Aluminium         10 % mark-up 20 % mark-up 30 % mark-up   7601 Unwrought aluminium 0,360 N/A 0,360 0,396 0,432 0,468 (L) 7603 Aluminium powders and flakes 1,800 N/A 1,800 1,980 2,160 2,340 (L) 7604 10 10 Bars and rods 2,020 N/A 2,020 2,222 2,424 2,626 (L) 7604 10 90 Profiles 2,040 N/A 2,040 2,244 2,448 2,652 (L) 7604 21 00 Hollow profiles 2,040 N/A 2,040 2,244 2,448 2,652 (L) 7604 29 10 Bars and rods 2,020 N/A 2,020 2,222 2,424 2,626 (L) 7604 29 90 Profiles 2,040 N/A 2,040 2,244 2,448 2,652 (L) 7605 Aluminium wire 2,020 N/A 2,020 2,222 2,424 2,626 (L) 7606 Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm 2,480 N/A 2,480 2,728 2,976 3,224 (L) 7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm 2,480 N/A 2,480 2,728 2,976 3,224 (L) 7608 Aluminium tubes and pipes 2,040 N/A 2,040 2,244 2,448 2,652 (L) 7609 00 00 Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) 2,040 N/A 2,040 2,244 2,448 2,652 (L) 7610 10 00 Doors, windows and their frames and thresholds for doors 2,040 N/A 2,040 2,244 2,448 2,652 (L) 7610 90 Other 2,040 N/A 2,040 2,244 2,448 2,652 (L) 7610 90 10 Bridges and bridge-sections, towers and lattice masts 2,040 N/A 2,040 2,244 2,448 2,652 (L) 7610 90 90 Other 2,040 N/A 2,040 2,244 2,448 2,652 (L) 7611 00 00 Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 2,480 N/A 2,480 2,728 2,976 3,224 (L) 7612 Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 2,480 N/A 2,480 2,728 2,976 3,224 (L) 7613 00 00 Aluminium containers for compressed or liquefied gas 2,480 N/A 2,480 2,728 2,976 3,224 (L) 7614 Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated 2,020 N/A 2,020 2,222 2,424 2,626 (L) 7616 10 00 Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles 2,480 N/A 2,480 2,728 2,976 3,224 (L) 7616 91 00 Cloth, grill, netting and fencing, of aluminium wire 2,480 N/A 2,480 2,728 2,976 3,224 (L) 7616 99 10 Cast 1,800 N/A 1,800 1,980 2,160 2,340 (L) 7616 99 90 Other 2,480 N/A 2,480 2,728 2,976 3,224 (L) Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066   Iron and steel         10 % mark-up 20 % mark-up 30 % mark-up   2601 12 00 Agglomerated iron ores and concentrates (excl. roasted iron pyrites) 1,040 0,070 1,110 1,221 1,332 1,443   7201 Pig iron and spiegeleisen, in pigs, blocks or other primary forms 2,190 N/A 2,190 2,409 2,628 2,847   7202 11 Ferro-manganese, containing by weight > 2% of carbon 1,690 N/A 1,690 1,859 2,028 2,197   7202 19 Ferro-manganese, containing by weight <= 2% carbon – N/A – _ _ _   7202 41 Ferro-chromium, containing by weight > 4% of carbon – N/A – _ _ –   7202 49 Ferro-chromium, containing by weight <= 4% of carbon – N/A – _ _ –   7202 60 00 Ferro-nickel 3,480 N/A 3,480 3,828 4,176 4,524   7203 Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99,94%, in lumps, pellets or similar forms – N/A – _ _ –   7205 Granules and powders of pig iron, spiegeleisen, iron or steel (excl. granules and powders of ferro-alloys, turnings and filings of iron or steel, radioactive iron powders "isotopes" and certain low-calibre, substandard balls for ballbearings) 2,240 N/A 2,240 2,464 2,688 2,912 (C) 7206 Iron and non-alloy steel in ingots or other primary forms (excl. remelting scrap ingots, products obtained by continuous casting and iron of heading 7203) see below N/A see below see below see below see below   7206 10 00 Ingots, of iron and non-alloy steel (excl. remelted scrap ingots, continuous cast products, iron of heading 7203) 2,330 N/A 2,330 2,563 2,796 3,029 (C) 7206 90 00 Iron and non-alloy steel, in puddled bars or other primary forms (excl. ingots, remelted scrap ingots, continuous cast products, iron of heading 7203) 2,330 N/A 2,330 2,563 2,796 3,029 (C) 7207 Semi-finished products of iron or non-alloy steel see below N/A see below see below see below see below   7207 11 11 Semi-finished products, of non-alloy free-cutting steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting 2,350 N/A 2,350 2,585 2,820 3,055 (C) 7207 11 14 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness of <= 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel) 2,350 N/A 2,350 2,585 2,820 3,055 (C) 7207 11 16 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness of > 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel) 2,350 N/A 2,350 2,585 2,820 3,055 (C) 7207 11 90 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular cross-section, the width < twice the thickness, forged 2,330 N/A 2,330 2,563 2,796 3,029 (C) 7207 12 10 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtained by continuous casting 2,350 N/A 2,350 2,585 2,820 3,055 (C) 7207 12 90 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular "other than square" cross-section, the width >= twice the thickness, forged 2,330 N/A 2,330 2,563 2,796 3,029 (C) 7207 19 12 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting 2,350 N/A 2,350 2,585 2,820 3,055 (C) 7207 19 19 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, forged 2,330 N/A 2,330 2,563 2,796 3,029 (C) 7207 19 80 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon (excl. semi-products, of square, rectangular, circular or polygonal cross-section) 2,350 N/A 2,350 2,585 2,820 3,055 (C) 7207 20 11 Semi-finished products, of non-alloy free-cutting steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting 2,350 N/A 2,350 2,585 2,820 3,055 (C) 7207 20 15 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% but < 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel) 2,350 N/A 2,350 2,585 2,820 3,055 (C) 7207 20 17 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel) 2,350 N/A 2,350 2,585 2,820 3,055 (C) 7207 20 19 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, forged 2,330 N/A 2,330 2,563 2,796 3,029 (C) 7207 20 32 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtained by continuous casting 2,350 N/A 2,350 2,585 2,820 3,055 (C) 7207 20 39 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of rectangular "other than square" cross-section and the width >= twice the thickness, forged 2,330 N/A 2,330 2,563 2,796 3,029 (C) 7207 20 52 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting 2,350 N/A 2,350 2,585 2,820 3,055 (C) 7207 20 59 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of circular or polygonal cross-section, forged 2,330 N/A 2,330 2,563 2,796 3,029 (C) 7207 20 80 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon (excl. those of square, rectangular, circular or polygonal cross-section) 2,350 N/A 2,350 2,585 2,820 3,055 (C) 7208 Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled, not clad, plated or coated 2,350 N/A 2,350 2,585 2,820 3,055 (C) 7209 Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, cold-rolled "cold-reduced", not clad, plated or coated 2,370 N/A 2,370 2,607 2,844 3,081 (C) 7210 Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated 2,370 N/A 2,370 2,607 2,844 3,081 (C) 7211 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", not clad, plated or coated see below N/A see below see below see below see below   7211 13 00 Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as "wide flats" 2,350 N/A 2,350 2,585 2,820 3,055 (C) 7211 14 00 Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, not further worked than hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm (excl. "wide flats") 2,350 N/A 2,350 2,585 2,820 3,055 (C) 7211 19 00 Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, simply hot-rolled, not clad, plated or coated, of a thickness < 4,75 mm (excl. "wide flats") 2,350 N/A 2,350 2,585 2,820 3,055 (C) 7211 23 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight < 0,25% of carbon 2,370 N/A 2,370 2,607 2,844 3,081 (C) 7211 29 00 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight >= 0,25% of carbon 2,370 N/A 2,370 2,607 2,844 3,081 (C) 7211 90 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked, but not clad, plated or coated 2,370 N/A 2,370 2,607 2,844 3,081 (C) 7212 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated 2,370 N/A 2,370 2,607 2,844 3,081 (C) 7213 Bars and rods of iron or non-alloy steel, hot-rolled, in irregularly wound coils 2,350 N/A 2,350 2,585 2,820 3,055 (C) 7214 Bars and rods, of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but incl. those twisted after rolling (excl. in irregularly wound coils) see below N/A see below see below see below see below   7214 10 00 Bars and rods, of iron or non-alloy steel, not further worked than forged (excl. in irregularly wound coils) 2,330 N/A 2,330 2,563 2,796 3,029 (C) 7214 20 00 Bars and rods, of iron or non-alloy steel, with indentations, ribs, groves or other deformations produced during the rolling process 2,350 N/A 2,350 2,585 2,820 3,055 (C) 7214 30 00 Bars and rods, of non-alloy free-cutting steel, not further worked than hot-rolled, hot-drawn or hot-extruded (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling) 2,350 N/A 2,350 2,585 2,820 3,055 (C) 7214 91 Bars and rods, of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, of rectangular "other than square" cross-section (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process, bars and rods twisted after rolling and free-cutting steel) 2,350 N/A 2,350 2,585 2,820 3,055 (C) 7214 99 Bars and rods, of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded (excl. of rectangular [other than square] cross-section and those containing indentations, ribs, grooves or other deformations produced during the rolling process, and of non-alloy free-cutting steel) 2,350 N/A 2,350 2,585 2,820 3,055 (C) 7215 Bars and rods, of iron or non-alloy steel, cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked, n.e.s. 2,350 N/A 2,350 2,585 2,820 3,055 (C) 7216 Angles, shapes and sections of iron or non-alloy steel, n.e.s. 2,350 N/A 2,350 2,585 2,820 3,055 (C) 7217 Wire of iron or non-alloy steel, in coils (excl. bars and rods) see below N/A see below see below see below see below   7217 10 Wire of iron or non-alloy steel, in coils, not plated or coated, whether or not polished (excl. bars and rods) 2,350 N/A 2,350 2,585 2,820 3,055 (C) 7217 20 Wire of iron or non-alloy steel, in coils, plated or coated with zinc (excl. bars and rods) 2,350 N/A 2,350 2,585 2,820 3,055 (C) 7217 30 Wire of iron or non-alloy steel, in coils, plated or coated with base metals (excl. plated or coated with zinc, and bars and rods) 2,350 N/A 2,350 2,585 2,820 3,055 (C) 7217 90 Wire of iron or non-alloy steel, in coils, plated or coated (excl. plated or coated with base metals, and bars and rods) 2,350 N/A 2,350 2,585 2,820 3,055 (C) 7218 Stainless steel in ingots or other primary forms (excl. remelting scrap ingots and products obtained by continuous casting); semi-finished products of stainless steel see below see below see below see below see below see below   7218 10 00 Steel, stainless, in ingots and other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) – – – – – –   7218 91 Semi-finished products of stainless steel, of rectangular "other than square" cross-section – – – – – –   7218 99 11 Semi-finished products of stainless steel, of square cross-section, rolled or obtained by continuous casting – – – – – –   7218 99 19 Semi-finished products of stainless steel, of square cross-section, forged – – – – – –   7218 99 20 Semi-finished products of stainless steel, of circular cross-section or of cross-section other than square or rectangular, rolled or obtained by continuous casting – – – – – –   7218 99 80 Semi-finished products of stainless steel, forged (excl. products of square or rectangular cross-section) – – – – – –   7219 Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7219 11 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of > 10 mm – – – – – –   7219 12 Flat-rolled products of stainless steel, of a width of>= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 4,7 mm and <= 10 mm – – – – – –   7219 13 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 3 mm and < 4,75 mm – – – – – –   7219 14 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of < 3 mm – – – – – –   7219 21 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of > 10 mm – – – – – –   7219 22 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 4,75 mm and <= 10 mm – – – – – –   7219 23 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 3 mm and < 4,75 mm – – – – – –   7219 24 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of < 3 mm – – – – – –   7219 31 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 4,75 mm – – – – – –   7219 32 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 3 mm but < 4,75 mm – – – – – –   7219 33 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of > 1 mm but < 3 mm – – – – – –   7219 34 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 0,5 mm but <= 1 mm – – – – – –   7219 35 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of < 0,5 mm – – – – – –   7219 90 Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked – – – – – –   7220 Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7220 11 00 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of >= 4,75 mm – – – – – –   7220 12 00 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of < 4,75 mm – – – – – –   7220 20 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" – – – – – –   7220 90 Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked – – – – – –   7221 Bars and rods of stainless steel, hot-rolled, in irregularly wound coils – – – – – –   7222 Other bars and rods of stainless steel; angles, shapes and sections of stainless steel, n.e.s. see below see below see below see below see below see below   7222 11 Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only hot-extruded, of circular cross-section – – – – – –   7222 19 Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only extruded (excl. of circular cross-section) – – – – – –   7222 20 Other bars and rods of stainless steel, not further worked than cold-formed or cold-finished – – – – – –   7222 30 Other bars and rods of stainless steel, cold-formed or cold-finished and further worked, or not further worked than forged, or forged, or hot-formed by other means and further worked, n.e.s. – – – – – –   7222 40 Angles, shapes and sections of stainless steel, n.e.s. – – – – – –   7223 Wire of stainless steel, in coils (excl. bars and rods) see below see below see below see below see below see below   7223 00 Wire of stainless steel, in coils (excl. bars and rods) – – – – – –   7224 Steel, alloy, other than stainless, in ingots or other primary forms, semi-finished products of alloy steel other than stainless (excl. waste and scrap in ingot form, and products obtained by continuous casting) see below N/A see below see below see below see below   7224 10 Steel, alloy, other than stainless, in ingots or other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) 3,440 N/A 3,440 3,784 4,128 4,472 (F) 7224 90 02 Semi-finished products of tool steel 3,480 N/A 3,480 3,828 4,176 4,524 (F) 7224 90 03 Semi-finished products of high-speed steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting the width measuring < twice the thickness 3,480 N/A 3,480 3,828 4,176 4,524 (F) 7224 90 05 Semi-finished products of steel containing by weight <= 0,7% of carbon, 0,5% to 1,2% of manganese, 0,6% to 2,3% of silicon, or of steel containing by weight >= 0,0008% of boron with any other element < the minimum content referred to in Note 1 f to chapter 72, of square or rectangular cross-section, hot rolled or obtained by continuous casting, the width measuring < twice the thickness 3,480 N/A 3,480 3,828 4,176 4,524 (F) 7224 90 07 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring < twice the thickness (excl. of tool steel, high-speed steel and articles of subheading 7224.90.05) 3,480 N/A 3,480 3,828 4,176 4,524 (F) 7224 90 14 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring >= twice the thickness (excl. of tool steel) 3,480 N/A 3,480 3,828 4,176 4,524 (F) 7224 90 18 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, forged (excl. of tool steel) 3,440 N/A 3,440 3,784 4,128 4,472 (F) 7224 90 31 Semi-finished products of steel containing by weight 0,9% to 1,15% carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting 3,480 N/A 3,480 3,828 4,176 4,524 (F) 7224 90 38 Semi-finished products of alloy steel, other than stainless steel, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting (excl. of tool steel and products containing by weight 0,9% to 1,15% of carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum) 3,480 N/A 3,480 3,828 4,176 4,524 (F) 7224 90 90 Semi-finished products of alloy steel, other than stainless steel, forged (excl. of tool steel and products of square or rectangular, circular or polygamol cross-section) 3,440 N/A 3,440 3,784 4,128 4,472 (F) 7225 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" see below N/A see below see below see below see below   7225 11 00 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, grain-oriented 4,600 N/A 4,600 5,060 5,520 5,980 (C) 7225 19 10 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, hot-rolled 3,480 N/A 3,480 3,828 4,176 4,524 (C) 7225 19 90 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, cold-rolled "cold-reduced", non-grain-oriented 3,500 N/A 3,500 3,850 4,200 4,550 (F) 7225 30 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, in coils (excl. products of silicon-electrical steel) 3,480 N/A 3,480 3,828 4,176 4,524 (F) 7225 40 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, not in coils (excl. products of silicon-electrical steel) 3,480 N/A 3,480 3,828 4,176 4,524 (F) 7225 50 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of silicon-electrical steel) 3,500 N/A 3,500 3,850 4,200 4,550 (F) 7225 91 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and electrolytically plated or coated with zinc (excl. products of silicon-electrical steel) 3,500 N/A 3,500 3,850 4,200 4,550 (F) 7225 92 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and plated or coated with zinc (excl. electrolytically plated or coated and products of silicon-electrical steel) 3,500 N/A 3,500 3,850 4,200 4,550 (F) 7225 99 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. plated or coated with zinc and products of silicon-electrical steel) 3,500 N/A 3,500 3,850 4,200 4,550 (F) 7226 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" see below N/A see below see below see below see below   7226 11 00 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", grain-oriented 4,600 N/A 4,600 5,060 5,520 5,980 (C) 7226 19 10 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, not further worked than hot-rolled 3,480 N/A 3,480 3,828 4,176 4,524 (C) 7226 19 80 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, cold-rolled "cold-reduced", whether or not further worked, or hot-rolled and further worked, non-grain-oriented 3,500 N/A 3,500 3,850 4,200 4,550 (F) 7226 20 00 Flat-rolled products of high-speed steel, of a width of <= 600 mm, hot-rolled or cold-rolled "cold-reduced" 3,480 N/A 3,480 3,828 4,176 4,524 (F) 7226 91 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than hot-rolled (excl. products of high-speed steel or silicon-electrical steel) 3,480 N/A 3,480 3,828 4,176 4,524 (F) 7226 92 00 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of high-speed steel or silicon-electrical steel) 3,500 N/A 3,500 3,850 4,200 4,550 (F) 7226 99 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. products of high-speed steel or silicon-electrical steel) 3,500 N/A 3,500 3,850 4,200 4,550 (F) 7227 Bars and rods of alloy steel other than stainless, hot-rolled, in irregularly wound coils 3,500 N/A 3,500 3,850 4,200 4,550 (C)/(F) 7228 Other bars and rods of alloy steel other than stainless, angles, shapes and sections of alloy steel other than stainless, n.e.s.; hollow drill bars and rods, of alloy or non-alloy steel see below N/A see below see below see below see below   7228 10 20 Bars and rods of high-speed steel, not further worked than hot-rolled, hot-drawn or extruded, and hot-rolled, hot-drawn or extruded, not further worked than clad (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,500 N/A 3,500 3,850 4,200 4,550 (F) 7228 10 50 Bars and rods of high-speed steel, forged (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,440 N/A 3,440 3,784 4,128 4,472 (F) 7228 10 90 Bars and rods of high-speed steel, not further worked than cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked (excl. forged products, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,500 N/A 3,500 3,850 4,200 4,550 (F) 7228 20 Bars and rods of silico-manganese steel (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,500 N/A 3,500 3,850 4,200 4,550 (F) 7228 30 Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,500 N/A 3,500 3,850 4,200 4,550 (C)/(F) 7228 40 Bars and rods of alloy steel other than stainless, not further worked than forged (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,440 N/A 3,440 3,784 4,128 4,472 (F) 7228 50 Bars and rods of alloy steel other than stainless, not further worked than cold-formed or cold-finished (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,500 N/A 3,500 3,850 4,200 4,550 (C)/(F) 7228 60 Bars and rods of alloy steel other than stainless, cold-formed or cold-finished and further worked or hot-formed and further worked, n.e.s. (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 3,500 N/A 3,500 3,850 4,200 4,550 (F) 7228 70 Angles, shapes and sections of alloy steel other than stainless, n.e.s. 3,500 N/A 3,500 3,850 4,200 4,550 (F) 7228 80 00 Hollow drill bars and rods, of alloy or non-alloy steel 3,500 N/A 3,500 3,850 4,200 4,550 (F) 7229 Wire of alloy steel other than stainless, in coils (excl. bars and rods) 3,500 N/A 3,500 3,850 4,200 4,550 (C)/(F) 7301 Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel 2,370 N/A 2,370 2,607 2,844 3,081 (C) 7302 Railway or tramway track construction material of iron or steel, the following : rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers "cross-ties", fish-plates, chairs, chair wedges, sole plates "base plates", rail clips, bedplates, ties and other material specialised for jointing or fixing rails 2,770 N/A 2,770 3,047 3,324 3,601 (C) 7303 Tubes, pipes and hollow profiles, of cast iron see below N/A see below see below see below see below   7303 00 Tubes, pipes and hollow profiles, of cast iron 2,230 N/A 2,230 2,453 2,676 2,899   7304 Tubes, pipes and hollow profiles, seamless, of iron or steel (excl. products of cast iron) see below N/A see below see below see below see below   7304 11 00 Line pipe of a kind used for oil or gas pipelines, seamless, of stainless steel 3,070 N/A 3,070 3,377 3,684 3,991   7304 19 Line pipe of a kind used for oil or gas pipelines, seamless, of iron or steel (excl. products of stainless steel or of cast iron) 2,330 N/A 2,330 2,563 2,796 3,029 (C) 7304 22 00 Drill pipe, seamless, of stainless steel, of a kind used in drilling for oil or gas 3,070 N/A 3,070 3,377 3,684 3,991   7304 23 00 Drill pipe, seamless, of a kind used in drilling for oil or gas, of iron or steel (excl. products of stainless steel or of cast iron) 2,330 N/A 2,330 2,563 2,796 3,029 (C) 7304 24 00 Casing and tubing, seamless, of a kind used for drilling for oil or gas, of stainless steel 3,070 N/A 3,070 3,377 3,684 3,991   7304 29 Casing and tubing, seamless, of iron or steel, of a kind used in drilling for oil or gas (excl. products of cast iron) 2,330 N/A 2,330 2,563 2,796 3,029 (C) 7304 31 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" (excl. cast iron products and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used for drilling for oil or gas) 2,330 N/A 2,330 2,563 2,796 3,029 (C) 7304 39 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, not cold-drawn or cold-rolled "cold-reduced" (excl. cast iron products, line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas) 2,330 N/A 2,330 2,563 2,796 3,029 (C) 7304 41 00 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas) 3,070 N/A 3,070 3,377 3,684 3,991   7304 49 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines or of a kind used for drilling for oil or gas) 3,070 N/A 3,070 3,377 3,684 3,991   7304 51 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil) 2,260 N/A 2,260 2,486 2,712 2,938 (F) 7304 59 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil) 2,260 N/A 2,260 2,486 2,712 2,938 (C)/(F) 7304 90 00 Tubes, pipes and hollow profiles, seamless, of non-circular cross-section, of iron or steel (excl. products of cast iron) 2,330 N/A 2,330 2,563 2,796 3,029 (C) 7305 Tubes and pipes, having circular cross-sections and an external diameter of > 406,4 mm, of flat-rolled products of iron or steel "e.g., welded, riveted or similarly closed" 2,370 N/A 2,370 2,607 2,844 3,081 (C) 7306 Tubes, pipes and hollow profiles "e.g., open seam or welded, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless tubes and pipes and tubes having internal and external circular cross-sections and an external diameter of > 406,4 mm) see below N/A see below see below see below see below   7306 11 00 Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm 3,120 N/A 3,120 3,432 3,744 4,056   7306 19 00 Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron) 2,370 N/A 2,370 2,607 2,844 3,081 (C) 7306 21 00 Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm 3,120 N/A 3,120 3,432 3,744 4,056   7306 29 00 Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron) 2,370 N/A 2,370 2,607 2,844 3,081 (C) 7306 30 12 Precision tubes, welded, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" 2,370 N/A 2,370 2,607 2,844 3,081 (C) 7306 30 18 Precision tubes, welded, of circular cross-section, of iron or non-alloy steel (excl. cold-drawn or cold-rolled) 2,350 N/A 2,350 2,585 2,820 3,055   7306 30 41 Threaded or threadable tubes "gas pipe", welded, of circular cross-section, of iron or non-alloy steel, plated or coated with zinc 2,370 N/A 2,370 2,607 2,844 3,081 (C) 7306 30 49 Threaded or threadable tubes "gas pipe", welded, of circular cross-section, of iron or non-alloy steel (excl. products plated or coated with zinc) 2,370 N/A 2,370 2,607 2,844 3,081 (C) 7306 30 72 Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel, of an external diameter of <= 168,3 mm, plated or coated with zinc (excl. line pipe of a kind used for oil or gas pipelines or casing and tubingof a kind used in drilling for oil or gas) 2,370 N/A 2,370 2,607 2,844 3,081 (C) 7306 30 77 Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel of an external diameter of <= 168,3 mm (excl. plated or coated with zinc and line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used in drilling for oil or gas, precision tubes and threaded or threadable tubes "gas pipe") 2,370 N/A 2,370 2,607 2,844 3,081 (C) 7306 30 80 Tubes, pipes and hollow profiles, welded, having a circular cross-section, of iron or steel, of an external diameter of > 168,3 mm but <= 406,4 mm (excl. line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, or precision steel tubes, electrical conduit tubes or threaded or threadable tubes "gas pipe") 2,370 N/A 2,370 2,607 2,844 3,081 (C) 7306 40 20 Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. products having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) 3,120 N/A 3,120 3,432 3,744 4,056   7306 40 80 Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel (excl. products cold-drawn or cold-rolled "cold-reduced", tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) 3,110 N/A 3,110 3,421 3,732 4,043   7306 50 21 Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" 2,320 N/A 2,320 2,552 2,784 3,016 (F) 7306 50 29 Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless (excl. cold-drawn or cold-rolled) 2,310 N/A 2,310 2,541 2,772 3,003 (F) 7306 50 80 Tubes, pipes and hollow profiles, welded, of circular cross-section, of alloy steel other than stainless (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and precision steel tubes) 2,320 N/A 2,320 2,552 2,784 3,016 (F) 7306 61 10 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel 3,120 N/A 3,120 3,432 3,744 4,056   7306 61 92 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of <= 2 mm 2,370 N/A 2,370 2,607 2,844 3,081 (C) 7306 61 99 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of > 2 mm 2,370 N/A 2,370 2,607 2,844 3,081 (C) 7306 69 10 Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) 3,120 N/A 3,120 3,432 3,744 4,056   7306 69 90 Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of iron or steel other than stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) 2,370 N/A 2,370 2,607 2,844 3,081 (C) 7306 90 00 Tubes, pipes and hollow profiles "e.g., open seam, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless or welded tubes and pipes and tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm) 2,370 N/A 2,370 2,607 2,844 3,081 (C) 7307 Tube or pipe fittings "e.g. couplings, elbows, sleeves", of iron or steel see below N/A see below see below see below see below   7307 11 Tube or pipe fittings of non-malleable cast iron 2,230 N/A 2,230 2,453 2,676 2,899   7307 19 10 Tube or pipe fittings of cast iron (excl. of non-malleable) 2,230 N/A 2,230 2,453 2,676 2,899   7307 19 90 Cast tube or pipe fittings of steel 2,330 N/A 2,330 2,563 2,796 3,029 (C) 7307 21 00 Flanges of stainless steel (excl. cast products) 2,740 N/A 2,740 3,014 3,288 3,562   7307 22 Threaded elbows, bends and sleeves of stainless steel (excl. cast products) 2,740 N/A 2,740 3,014 3,288 3,562   7307 23 Butt welding tube or pipe fittings of stainless steel (excl. cast products) 2,740 N/A 2,740 3,014 3,288 3,562   7307 29 Tube or pipe fittings of stainless steel (excl. cast products, flanges, threaded elbows, bends and sleeves and butt weldings fittings) 2,740 N/A 2,740 3,014 3,288 3,562   7307 91 00 Flanges of iron or steel (excl. cast or stainless products) 2,330 N/A 2,330 2,563 2,796 3,029 (C) 7307 92 Threaded elbows, bends and sleeves, of stainless steel (excl. cast or stainless products) 2,330 N/A 2,330 2,563 2,796 3,029 (C) 7307 93 Butt welding fittings of iron or steel (excl. cast iron or stainless steel products, and flanges) 2,330 N/A 2,330 2,563 2,796 3,029 (C) 7307 99 Tube or pipe fittings, of iron or steel (excl. cast iron or stainless steel products; flanges; threaded elbows, bends and sleeves; butt welding fittings) 2,330 N/A 2,330 2,563 2,796 3,029 (C) 7308 Structures and parts of structures "e.g., bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns", of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel (excl. prefabricated buildings of heading 9406) 2,840 N/A 2,840 3,124 3,408 3,692 (C) 7309 Reservoirs, tanks, vats and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of > 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated (excl. containers specifically constructed or equipped for one or more types of transport) 2,990 N/A 2,990 3,289 3,588 3,887 (C) 7310 Tanks, casks, drums, cans, boxes and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of <= 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated, n.e.s. 2,370 N/A 2,370 2,607 2,844 3,081 (C) 7311 Containers of iron or steel, for compressed or liquefied gas (excl. containers specifically constructed or equipped for one or more types of transport) see below N/A see below see below see below see below   7311 00 Containers of iron or steel, for compressed or liquefied gas (excl. containers specifically constructed or equipped for one or more types of transport) 2,960 N/A 2,960 3,256 3,552 3,848 (C) 7318 Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers, incl. spring washers, and similar articles, of iron or steel (excl. lag screws, stoppers, plugs and the like, threaded) see below N/A see below see below see below see below   7318 11 00 Coach screws of iron or steel 2,350 N/A 2,350 2,585 2,820 3,055 (C) 7318 12 10 Wood screws of stainless steel (excl. coach screws) 3,090 N/A 3,090 3,399 3,708 4,017 (C) 7318 12 90 Wood screws of iron or steel other than stainless (excl. coach screws) 2,350 N/A 2,350 2,585 2,820 3,055 (C) 7318 13 00 Screw hooks and screw rings, of iron or steel 2,350 N/A 2,350 2,585 2,820 3,055 (C) 7318 14 10 Self-tapping screws, of stainless steel (excl. wood screws) 3,090 N/A 3,090 3,399 3,708 4,017 (C) 7318 14 91 Spaced-thread screws of iron or steel other than stainless 2,350 N/A 2,350 2,585 2,820 3,055 (C) 7318 14 99 Self-tapping screws of iron or steel other than stainless (excl. spaced-thread screws and wood screws) 2,350 N/A 2,350 2,585 2,820 3,055 (C) 7318 15 Threaded screws and bolts, of iron or steel, whether or not with their nuts and washers (excl. coach screws and other wood screws, screw hooks and screw rings, self-tapping screws, lag screws, stoppers, plugs and the like, threaded) 2,750 N/A 2,750 3,025 3,300 3,575 (C) 7318 16 Nuts of iron or steel 2,960 N/A 2,960 3,256 3,552 3,848 (C) 7318 19 00 Threaded articles, of iron or steel, n.e.s. 2,350 N/A 2,350 2,585 2,820 3,055 (C) 7318 21 00 Spring washers and other lock washers, of iron or steel 2,350 N/A 2,350 2,585 2,820 3,055 (C) 7318 22 00 Washers of iron or steel (excl. spring washers and other lock washers) 2,410 N/A 2,410 2,651 2,892 3,133 (C) 7318 23 00 Rivets of iron or steel (excl. tubular and bifurcated rivets for particular uses) 2,350 N/A 2,350 2,585 2,820 3,055 (C) 7318 24 00 Cotters and cotter pins, of iron or steel 2,350 N/A 2,350 2,585 2,820 3,055 (C) 7318 29 00 Non-threaded articles, of iron or steel 2,350 N/A 2,350 2,585 2,820 3,055 (C) 7326 Articles of iron or steel, n.e.s. (excl. cast articles) see below N/A see below see below see below see below   7326 11 00 Grinding balls and similar articles for mills, of iron or steel, forged or stamped, but not further worked 2,330 N/A 2,330 2,563 2,796 3,029 (C) 7326 19 Articles of iron or steel, forged or stamped, but not further worked, n.e.s. (excl. grinding balls and similar articles for mills) 2,330 N/A 2,330 2,563 2,796 3,029 (C) 7326 20 00 Articles of iron or steel wire, n.e.s. 2,350 N/A 2,350 2,585 2,820 3,055 (C) 7326 90 30 Ladders and steps, of iron or steel 2,350 N/A 2,350 2,585 2,820 3,055 (C) 7326 90 40 Pallets and similar platforms for handling goods, of iron or steel 2,350 N/A 2,350 2,585 2,820 3,055 (C) 7326 90 50 Reels for cables, piping and the like, of iron or steel 2,350 N/A 2,350 2,585 2,820 3,055 (C) 7326 90 60 Ventilators, non-mechanical, guttering, hooks and like articles used in the building industry, n.e.s., of iron or steel 2,350 N/A 2,350 2,585 2,820 3,055 (C) 7326 90 92 Articles of iron or steel, open-die forged, n.e.s. 2,330 N/A 2,330 2,563 2,796 3,029 (C) 7326 90 94 Articles of iron or steel, closed-die forged, n.e.s. 2,330 N/A 2,330 2,563 2,796 3,029 (C) 7326 90 96 Sintered articles of iron or steel, n.e.s. 2,330 N/A 2,330 2,563 2,796 3,029 (C) 7326 90 98 Articles of iron or steel, n.e.s. 2,370 N/A 2,370 2,607 2,844 3,081 (C) Yemen Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – – – – (A) 2523 10 00 White clinker – – – – – – (B) 2523 10 00 Grey clinker 1,280 0,050 1,330 1,463 1,596 1,729 (A) 2523 21 00 White Portland cement – – – – – –   2523 29 00 Grey Portland cement 1,240 0,090 1,330 1,463 1,596 1,729   2523 90 00 White hydraulic cements – – – – – – (B) 2523 90 00 Grey hydraulic cements 1,180 0,090 1,270 1,397 1,524 1,651 (A) 2523 30 00 Aluminous cement – – – – – –   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 2,670 0,050 2,720 2,747 2,747 2,747   2814 10 00 Anhydrous ammonia – – – – – –   2814 20 00 Ammonia in aqueous solution 0,710 0,050 0,760 0,768 0,768 0,768   2834 21 00 Nitrate of potassium 2,170 0,060 2,240 2,262 2,262 2,262   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,450 0,030 0,480 0,485 0,485 0,485   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,740 0,030 0,770 0,778 0,778 0,778   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,350 0,090 1,440 1,454 1,454 1,454   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,320 0,090 1,410 1,424 1,424 1,424   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,610 0,040 0,660 0,667 0,667 0,667   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,370 0,050 1,430 1,444 1,444 1,444   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,620 0,050 1,670 1,687 1,687 1,687   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,500 0,070 2,570 2,596 2,596 2,596   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,090 0,060 2,150 2,172 2,172 2,172   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,090 0,060 2,150 2,172 2,172 2,172   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 4,170 0,080 4,250 4,293 4,293 4,293   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,090 0,060 2,150 2,172 2,172 2,172   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,560 0,060 1,620 1,636 1,636 1,636   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,560 0,080 1,630 1,646 1,646 1,646   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,780 0,030 0,810 0,818 0,818 0,818   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,010 0,030 1,040 1,050 1,050 1,050   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,670 0,020 0,690 0,697 0,697 0,697   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,520 0,040 0,560 0,566 0,566 0,566   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,320 0,020 0,340 0,343 0,343 0,343   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,400 0,040 1,440 1,454 1,454 1,454   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,540 0,040 0,580 0,586 0,586 0,586   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,400 0,040 1,440 1,454 1,454 1,454   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,700 0,020 0,720 0,727 0,727 0,727   Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066   Zambia Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 1,640 0,070 1,710 1,727 1,727 1,727   2814 10 00 Anhydrous ammonia – – – – – –   2814 20 00 Ammonia in aqueous solution 0,610 0,070 0,680 0,687 0,687 0,687   2834 21 00 Nitrate of potassium 1,460 0,090 1,560 1,576 1,576 1,576   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,450 0,050 0,500 0,505 0,505 0,505   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,750 0,050 0,800 0,808 0,808 0,808   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,360 0,150 1,510 1,525 1,525 1,525   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,330 0,150 1,480 1,495 1,495 1,495   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,590 0,090 0,680 0,687 0,687 0,687   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,040 0,100 1,150 1,162 1,162 1,162   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,110 0,080 1,200 1,212 1,212 1,212   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,710 0,130 1,840 1,858 1,858 1,858   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,480 0,110 1,590 1,606 1,606 1,606   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,480 0,110 1,590 1,606 1,606 1,606   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,560 0,110 2,660 2,687 2,687 2,687   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,440 0,110 1,550 1,566 1,566 1,566   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,200 0,110 1,300 1,313 1,313 1,313   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,320 0,130 1,440 1,454 1,454 1,454   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,620 0,080 0,700 0,707 0,707 0,707   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,750 0,090 0,840 0,848 0,848 0,848   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,510 0,070 0,580 0,586 0,586 0,586   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,480 0,070 0,550 0,556 0,556 0,556   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,300 0,050 0,360 0,364 0,364 0,364   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,010 0,120 1,130 1,141 1,141 1,141   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,550 0,110 0,660 0,667 0,667 0,667   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,980 0,080 1,070 1,081 1,081 1,081   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,510 0,050 0,560 0,566 0,566 0,566   Aluminium         10 % mark-up 20 % mark-up 30 % mark-up   7601 Unwrought aluminium 0,360 N/A 0,360 0,396 0,432 0,468 (L) 7603 Aluminium powders and flakes 0,590 N/A 0,590 0,649 0,708 0,767 (L) 7604 10 10 Bars and rods 0,810 N/A 0,810 0,891 0,972 1,053 (L) 7604 10 90 Profiles 0,830 N/A 0,830 0,913 0,996 1,079 (L) 7604 21 00 Hollow profiles 0,830 N/A 0,830 0,913 0,996 1,079 (L) 7604 29 10 Bars and rods 0,810 N/A 0,810 0,891 0,972 1,053 (L) 7604 29 90 Profiles 0,830 N/A 0,830 0,913 0,996 1,079 (L) 7605 Aluminium wire 0,810 N/A 0,810 0,891 0,972 1,053 (L) 7606 Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm 1,270 N/A 1,270 1,397 1,524 1,651 (L) 7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm 1,270 N/A 1,270 1,397 1,524 1,651 (L) 7608 Aluminium tubes and pipes 0,830 N/A 0,830 0,913 0,996 1,079 (L) 7609 00 00 Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) 0,830 N/A 0,830 0,913 0,996 1,079 (L) 7610 10 00 Doors, windows and their frames and thresholds for doors 0,830 N/A 0,830 0,913 0,996 1,079 (L) 7610 90 Other 0,830 N/A 0,830 0,913 0,996 1,079 (L) 7610 90 10 Bridges and bridge-sections, towers and lattice masts 0,830 N/A 0,830 0,913 0,996 1,079 (L) 7610 90 90 Other 0,830 N/A 0,830 0,913 0,996 1,079 (L) 7611 00 00 Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 1,270 N/A 1,270 1,397 1,524 1,651 (L) 7612 Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 1,270 N/A 1,270 1,397 1,524 1,651 (L) 7613 00 00 Aluminium containers for compressed or liquefied gas 1,270 N/A 1,270 1,397 1,524 1,651 (L) 7614 Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated 0,810 N/A 0,810 0,891 0,972 1,053 (L) 7616 10 00 Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles 1,270 N/A 1,270 1,397 1,524 1,651 (L) 7616 91 00 Cloth, grill, netting and fencing, of aluminium wire 1,270 N/A 1,270 1,397 1,524 1,651 (L) 7616 99 10 Cast 0,590 N/A 0,590 0,649 0,708 0,767 (L) 7616 99 90 Other 1,270 N/A 1,270 1,397 1,524 1,651 (L) Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 10,820 N/A 10,820 11,902 12,984 14,066   Zimbabwe Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay – – – – – –   2523 10 00 White clinker – – – – – –   2523 10 00 Grey clinker 1,240 0,040 1,290 1,419 1,548 1,677 (A) 2523 21 00 White Portland cement – – – – – –   2523 29 00 Grey Portland cement 1,240 0,070 1,310 1,441 1,572 1,703   2523 90 00 White hydraulic cements – – – – – –   2523 90 00 Grey hydraulic cements 1,180 0,080 1,250 1,375 1,500 1,625 (A) 2523 30 00 Aluminous cement – – – – – –   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 1,650 0,050 1,710 1,727 1,727 1,727   2814 10 00 Anhydrous ammonia 2,020 0,160 2,180 2,202 2,202 2,202   2814 20 00 Ammonia in aqueous solution 0,600 0,050 0,660 0,667 0,667 0,667   2834 21 00 Nitrate of potassium 1,470 0,080 1,550 1,566 1,566 1,566   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,460 0,040 0,500 0,505 0,505 0,505   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,760 0,040 0,800 0,808 0,808 0,808   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 1,390 0,120 1,510 1,525 1,525 1,525   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 1,360 0,120 1,480 1,495 1,495 1,495   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,600 0,090 0,690 0,697 0,697 0,697   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,050 0,100 1,150 1,162 1,162 1,162   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,120 0,080 1,200 1,212 1,212 1,212   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,730 0,120 1,850 1,869 1,869 1,869   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,500 0,110 1,610 1,626 1,626 1,626   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,500 0,110 1,610 1,626 1,626 1,626   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,580 0,080 2,660 2,687 2,687 2,687   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,450 0,100 1,550 1,566 1,566 1,566   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,210 0,100 1,310 1,323 1,323 1,323   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 1,340 0,110 1,450 1,465 1,465 1,465   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,630 0,090 0,720 0,727 0,727 0,727   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,760 0,110 0,860 0,869 0,869 0,869   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,520 0,080 0,600 0,606 0,606 0,606   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,480 0,070 0,540 0,545 0,545 0,545   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,300 0,050 0,360 0,364 0,364 0,364   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,030 0,130 1,160 1,172 1,172 1,172   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,550 0,110 0,660 0,667 0,667 0,667   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,990 0,080 1,080 1,091 1,091 1,091   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,510 0,060 0,570 0,576 0,576 0,576   Aluminium         10 % mark-up 20 % mark-up 30 % mark-up   7601 Unwrought aluminium 0,360 N/A 0,360 0,396 0,432 0,468 (L) 7603 Aluminium powders and flakes 0,480 N/A 0,480 0,528 0,576 0,624 (L) 7604 10 10 Bars and rods 0,700 N/A 0,700 0,770 0,840 0,910 (L) 7604 10 90 Profiles 0,720 N/A 0,720 0,792 0,864 0,936 (L) 7604 21 00 Hollow profiles 0,720 N/A 0,720 0,792 0,864 0,936 (L) 7604 29 10 Bars and rods 0,700 N/A 0,700 0,770 0,840 0,910 (L) 7604 29 90 Profiles 0,720 N/A 0,720 0,792 0,864 0,936 (L) 7605 Aluminium wire 0,700 N/A 0,700 0,770 0,840 0,910 (L) 7606 Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm 1,160 N/A 1,160 1,276 1,392 1,508 (L) 7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm 1,160 N/A 1,160 1,276 1,392 1,508 (L) 7608 Aluminium tubes and pipes 0,720 N/A 0,720 0,792 0,864 0,936 (L) 7609 00 00 Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) 0,720 N/A 0,720 0,792 0,864 0,936 (L) 7610 10 00 Doors, windows and their frames and thresholds for doors 0,720 N/A 0,720 0,792 0,864 0,936 (L) 7610 90 Other 0,720 N/A 0,720 0,792 0,864 0,936 (L) 7610 90 10 Bridges and bridge-sections, towers and lattice masts 0,720 N/A 0,720 0,792 0,864 0,936 (L) 7610 90 90 Other 0,720 N/A 0,720 0,792 0,864 0,936 (L) 7611 00 00 Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 1,160 N/A 1,160 1,276 1,392 1,508 (L) 7612 Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 1,160 N/A 1,160 1,276 1,392 1,508 (L) 7613 00 00 Aluminium containers for compressed or liquefied gas 1,160 N/A 1,160 1,276 1,392 1,508 (L) 7614 Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated 0,700 N/A 0,700 0,770 0,840 0,910 (L) 7616 10 00 Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles 1,160 N/A 1,160 1,276 1,392 1,508 (L) 7616 91 00 Cloth, grill, netting and fencing, of aluminium wire 1,160 N/A 1,160 1,276 1,392 1,508 (L) 7616 99 10 Cast 0,480 N/A 0,480 0,528 0,576 0,624 (L) 7616 99 90 Other 1,160 N/A 1,160 1,276 1,392 1,508 (L) Other Countries and Territories Product CN Code Description Default Value (direct emissions) Default Value (indirect emissions) Default Value (total emissions) 2026 Default Value (including mark-up) 2027 Default Value (including mark-up) 2028 and onwards Default Value (including mark-up) Underlying production route determining CBAM BM Cement         10 % mark-up 20 % mark-up 30 % mark-up   2507 00 80 Calcined clay 0,210 0,070 0,280 0,308 0,336 0,364   2523 10 00 White clinker 1,320 0,060 1,370 1,507 1,644 1,781 (B) 2523 10 00 Grey clinker 1,370 0,050 1,410 1,551 1,692 1,833 (A) 2523 21 00 White Portland cement 1,300 0,140 1,450 1,595 1,740 1,885   2523 29 00 Grey Portland cement 1,360 0,080 1,440 1,584 1,728 1,872   2523 90 00 White hydraulic cements 1,310 0,180 1,490 1,639 1,788 1,937 (B) 2523 90 00 Grey hydraulic cements 1,280 0,090 1,370 1,507 1,644 1,781 (A) 2523 30 00 Aluminous cement 1,890 0,140 2,030 2,233 2,436 2,639   Fertilisers         1 % mark-up 1 % mark-up 1 % mark-up   2808 00 00 Nitric acid; sulphonitric acids 2,770 0,040 2,810 2,838 2,838 2,838   2814 10 00 Anhydrous ammonia 2,970 0,150 3,130 3,161 3,161 3,161   2814 20 00 Ammonia in aqueous solution 0,910 0,050 0,960 0,970 0,970 0,970   2834 21 00 Nitrate of potassium 2,260 0,070 2,330 2,353 2,353 2,353   3102 Mineral or chemical fertilizers, nitrogenous see below see below see below see below see below see below   3102 10 12 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 0,860 0,040 0,900 0,909 0,909 0,909   3102 10 15 Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg) 1,430 0,040 1,470 1,485 1,485 1,485   3102 10 19 Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea) 2,600 0,120 2,720 2,747 2,747 2,747   3102 10 90 Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg) 2,540 0,120 2,660 2,687 2,687 2,687   3102 21 00 Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,870 0,100 0,970 0,980 0,980 0,980   3102 29 00 Double salts and mixtures of ammonium sulphate and ammonium nitrate 1,510 0,110 1,620 1,636 1,636 1,636   3102 30 10 Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg) 1,710 0,080 1,790 1,808 1,808 1,808   3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,640 0,110 2,750 2,778 2,778 2,778   3102 40 10 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,260 0,100 2,360 2,384 2,384 2,384   3102 40 90 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,260 0,100 2,360 2,384 2,384 2,384   3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 4,320 0,070 4,390 4,434 4,434 4,434   3102 60 00 Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 2,210 0,100 2,310 2,333 2,333 2,333   3102 80 00 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg) 1,850 0,100 1,960 1,980 1,980 1,980   3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg) 2,160 0,110 2,280 2,303 2,303 2,303   3105 Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium see below see below see below see below see below see below   3105 10 00 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg 0,900 0,100 1 1,010 1,010 1,010   3105 20 10 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,100 0,120 1,230 1,242 1,242 1,242   3105 20 90 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,750 0,090 0,840 0,848 0,848 0,848   3105 30 00 Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,710 0,080 0,780 0,788 0,788 0,788   3105 40 00 Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 0,450 0,060 0,510 0,515 0,515 0,515   3105 51 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates) 1,520 0,150 1,660 1,677 1,677 1,677   3105 59 00 Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates) 0,800 0,130 0,930 0,939 0,939 0,939   3105 90 20 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg) 1,500 0,080 1,570 1,586 1,586 1,586   3105 90 80 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg) 0,760 0,060 0,820 0,828 0,828 0,828   Aluminium         10 % mark-up 20 % mark-up 30 % mark-up   7601 Unwrought aluminium 2,203 N/A 2,203 2,423 2,643 2,863 (K) 7603 Aluminium powders and flakes 2,945 N/A 2,945 3,239 3,533 3,828 (K) 7604 10 10 Bars and rods 3,233 N/A 3,233 3,556 3,879 4,203 (K) 7604 10 90 Profiles 3,251 N/A 3,251 3,576 3,901 4,226 (K) 7604 21 00 Hollow profiles 3,251 N/A 3,251 3,576 3,901 4,226 (K) 7604 29 10 Bars and rods 3,233 N/A 3,233 3,556 3,879 4,203 (K) 7604 29 90 Profiles 3,251 N/A 3,251 3,576 3,901 4,226 (K) 7605 Aluminium wire 3,184 N/A 3,184 3,502 3,820 4,139 (K) 7606 Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm 3,717 N/A 3,717 4,088 4,460 4,831 (K) 7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm 3,893 N/A 3,893 4,282 4,671 5,060 (K) 7608 Aluminium tubes and pipes 3,220 N/A 3,220 3,542 3,864 4,186 (K) 7609 00 00 Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) 3,322 N/A 3,322 3,654 3,987 4,319 (K) 7610 10 00 Doors, windows and their frames and thresholds for doors 3,212 N/A 3,212 3,533 3,854 4,176 (K) 7610 90 Other 3,212 N/A 3,212 3,533 3,854 4,176 (K) 7610 90 10 Bridges and bridge-sections, towers and lattice masts 3,212 N/A 3,212 3,533 3,854 4,176 (K) 7610 90 90 Other 3,212 N/A 3,212 3,533 3,854 4,176 (K) 7611 00 00 Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 4,037 N/A 4,037 4,441 4,845 5,249 (K) 7612 Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment 3,944 N/A 3,944 4,338 4,732 5,127 (K) 7613 00 00 Aluminium containers for compressed or liquefied gas 4,037 N/A 4,037 4,441 4,845 5,249 (K) 7614 Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated 3,297 N/A 3,297 3,627 3,957 4,286 (K) 7616 10 00 Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles 3,891 N/A 3,891 4,281 4,670 5,059 (K) 7616 91 00 Cloth, grill, netting and fencing, of aluminium wire 3,891 N/A 3,891 4,281 4,670 5,059 (K) 7616 99 10 Cast 2,953 N/A 2,953 3,248 3,544 3,839 (K) 7616 99 90 Other 3,891 N/A 3,891 4,281 4,670 5,059 (K) Hydrogen         10 % mark-up 20 % mark-up 30 % mark-up   2804 10 00 Hydrogen 17,740 N/A 17,740 19,514 21,288 23,062   Iron and steel         10 % mark-up 20 % mark-up 30 % mark-up   2601 12 00 Agglomerated iron ores and concentrates (excl. roasted iron pyrites) 0,617 0,070 0,686 0,755 0,823 0,892   7201 Pig iron and spiegeleisen, in pigs, blocks or other primary forms 3,480 N/A 3,480 3,828 4,176 4,524   7202 11 Ferro-manganese, containing by weight > 2% of carbon 1,690 N/A 1,690 1,859 2,028 2,197   7202 19 Ferro-manganese, containing by weight <= 2% carbon 5,590 N/A 5,590 6,149 6,708 7,267   7202 41 Ferro-chromium, containing by weight > 4% of carbon 2,350 N/A 2,350 2,585 2,820 3,055   7202 49 Ferro-chromium, containing by weight <= 4% of carbon 2,870 N/A 2,870 3,157 3,444 3,731   7202 60 00 Ferro-nickel 4,014 N/A 4,014 4,415 4,817 5,218   7203 Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99,94%, in lumps, pellets or similar forms 1,325 N/A 1,325 1,458 1,590 1,723   7205 Granules and powders of pig iron, spiegeleisen, iron or steel (excl. granules and powders of ferro-alloys, turnings and filings of iron or steel, radioactive iron powders "isotopes" and certain low-calibre, substandard balls for ballbearings) 3,715 N/A 3,715 4,087 4,458 4,830 (C) 7206 Iron and non-alloy steel in ingots or other primary forms (excl. remelting scrap ingots, products obtained by continuous casting and iron of heading 7203) see below see below see below see below see below see below   7206 10 00 Ingots, of iron and non-alloy steel (excl. remelted scrap ingots, continuous cast products, iron of heading 7203) 3,750 N/A 3,750 4,125 4,500 4,875 (C) 7206 90 00 Iron and non-alloy steel, in puddled bars or other primary forms (excl. ingots, remelted scrap ingots, continuous cast products, iron of heading 7203) 3,750 N/A 3,750 4,125 4,500 4,875 (C) 7207 Semi-finished products of iron or non-alloy steel see below see below see below see below see below see below   7207 11 11 Semi-finished products, of non-alloy free-cutting steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting 3,996 N/A 3,996 4,395 4,795 5,195 (C) 7207 11 14 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness of <= 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel) 3,996 N/A 3,996 4,395 4,795 5,195 (C) 7207 11 16 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness of > 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel) 3,996 N/A 3,996 4,395 4,795 5,195 (C) 7207 11 90 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular cross-section, the width < twice the thickness, forged 4,053 N/A 4,053 4,458 4,864 5,269 (C) 7207 12 10 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtained by continuous casting 3,996 N/A 3,996 4,395 4,795 5,195 (C) 7207 12 90 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular "other than square" cross-section, the width >= twice the thickness, forged 4,053 N/A 4,053 4,458 4,864 5,269 (C) 7207 19 12 Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting 3,996 N/A 3,996 4,395 4,795 5,195 (C) 7207 19 19 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, forged 4,053 N/A 4,053 4,458 4,864 5,269 (C) 7207 19 80 Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon (excl. semi-products, of square, rectangular, circular or polygonal cross-section) 3,996 N/A 3,996 4,395 4,795 5,195 (C) 7207 20 11 Semi-finished products, of non-alloy free-cutting steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting 3,996 N/A 3,996 4,395 4,795 5,195 (C) 7207 20 15 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% but < 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel) 3,996 N/A 3,996 4,395 4,795 5,195 (C) 7207 20 17 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel) 3,996 N/A 3,996 4,395 4,795 5,195 (C) 7207 20 19 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, forged 4,053 N/A 4,053 4,458 4,864 5,269 (C) 7207 20 32 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtained by continuous casting 3,996 N/A 3,996 4,395 4,795 5,195 (C) 7207 20 39 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of rectangular "other than square" cross-section and the width >= twice the thickness, forged 4,053 N/A 4,053 4,458 4,864 5,269 (C) 7207 20 52 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting 3,996 N/A 3,996 4,395 4,795 5,195 (C) 7207 20 59 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of circular or polygonal cross-section, forged 4,053 N/A 4,053 4,458 4,864 5,269 (C) 7207 20 80 Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon (excl. those of square, rectangular, circular or polygonal cross-section) 3,996 N/A 3,996 4,395 4,795 5,195 (C) 7208 Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled, not clad, plated or coated 4,049 N/A 4,049 4,454 4,858 5,263 (C) 7209 Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, cold-rolled "cold-reduced", not clad, plated or coated 4,101 N/A 4,101 4,511 4,921 5,331 (C) 7210 Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated 4,101 N/A 4,101 4,511 4,921 5,331 (C) 7211 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", not clad, plated or coated see below see below see below see below see below see below   7211 13 00 Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as "wide flats" 4,049 N/A 4,049 4,454 4,858 5,263 (C) 7211 14 00 Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, not further worked than hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm (excl. "wide flats") 4,049 N/A 4,049 4,454 4,858 5,263 (C) 7211 19 00 Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, simply hot-rolled, not clad, plated or coated, of a thickness < 4,75 mm (excl. "wide flats") 4,049 N/A 4,049 4,454 4,858 5,263 (C) 7211 23 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight < 0,25% of carbon 4,101 N/A 4,101 4,511 4,921 5,331 (C) 7211 29 00 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight >= 0,25% of carbon 4,101 N/A 4,101 4,511 4,921 5,331 (C) 7211 90 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked, but not clad, plated or coated 4,101 N/A 4,101 4,511 4,921 5,331 (C) 7212 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated 4,101 N/A 4,101 4,511 4,921 5,331 (C) 7213 Bars and rods of iron or non-alloy steel, hot-rolled, in irregularly wound coils 3,996 N/A 3,996 4,395 4,795 5,195 (C) 7214 Bars and rods, of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but incl. those twisted after rolling (excl. in irregularly wound coils) see below see below see below see below see below see below   7214 10 00 Bars and rods, of iron or non-alloy steel, not further worked than forged (excl. in irregularly wound coils) 4,053 N/A 4,053 4,458 4,864 5,269 (C) 7214 20 00 Bars and rods, of iron or non-alloy steel, with indentations, ribs, groves or other deformations produced during the rolling process 3,996 N/A 3,996 4,395 4,795 5,195 (C) 7214 30 00 Bars and rods, of non-alloy free-cutting steel, not further worked than hot-rolled, hot-drawn or hot-extruded (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling) 3,996 N/A 3,996 4,395 4,795 5,195 (C) 7214 91 Bars and rods, of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, of rectangular "other than square" cross-section (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process, bars and rods twisted after rolling and free-cutting steel) 3,996 N/A 3,996 4,395 4,795 5,195 (C) 7214 99 Bars and rods, of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded (excl. of rectangular [other than square] cross-section and those containing indentations, ribs, grooves or other deformations produced during the rolling process, and of non-alloy free-cutting steel) 3,996 N/A 3,996 4,395 4,795 5,195 (C) 7215 Bars and rods, of iron or non-alloy steel, cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked, n.e.s. 3,996 N/A 3,996 4,395 4,795 5,195 (C) 7216 Angles, shapes and sections of iron or non-alloy steel, n.e.s. 3,996 N/A 3,996 4,395 4,795 5,195 (C) 7217 Wire of iron or non-alloy steel, in coils (excl. bars and rods) see below see below see below see below see below see below   7217 10 Wire of iron or non-alloy steel, in coils, not plated or coated, whether or not polished (excl. bars and rods) 3,996 N/A 3,996 4,395 4,795 5,195 (C) 7217 20 Wire of iron or non-alloy steel, in coils, plated or coated with zinc (excl. bars and rods) 3,996 N/A 3,996 4,395 4,795 5,195 (C) 7217 30 Wire of iron or non-alloy steel, in coils, plated or coated with base metals (excl. plated or coated with zinc, and bars and rods) 3,996 N/A 3,996 4,395 4,795 5,195 (C) 7217 90 Wire of iron or non-alloy steel, in coils, plated or coated (excl. plated or coated with base metals, and bars and rods) 3,996 N/A 3,996 4,395 4,795 5,195 (C) 7218 Stainless steel in ingots or other primary forms (excl. remelting scrap ingots and products obtained by continuous casting); semi-finished products of stainless steel see below see below see below see below see below see below   7218 10 00 Steel, stainless, in ingots and other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) 5,006 N/A 5,006 5,507 6,007 6,508   7218 91 Semi-finished products of stainless steel, of rectangular "other than square" cross-section 4,940 N/A 4,940 5,434 5,928 6,422   7218 99 11 Semi-finished products of stainless steel, of square cross-section, rolled or obtained by continuous casting 4,940 N/A 4,940 5,434 5,928 6,422   7218 99 19 Semi-finished products of stainless steel, of square cross-section, forged 5,006 N/A 5,006 5,507 6,007 6,508   7218 99 20 Semi-finished products of stainless steel, of circular cross-section or of cross-section other than square or rectangular, rolled or obtained by continuous casting 4,940 N/A 4,940 5,434 5,928 6,422   7218 99 80 Semi-finished products of stainless steel, forged (excl. products of square or rectangular cross-section) 5,006 N/A 5,006 5,507 6,007 6,508   7219 Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7219 11 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of > 10 mm 4,940 N/A 4,940 5,434 5,928 6,422   7219 12 Flat-rolled products of stainless steel, of a width of>= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 4,7 mm and <= 10 mm 4,940 N/A 4,940 5,434 5,928 6,422   7219 13 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 3 mm and < 4,75 mm 4,940 N/A 4,940 5,434 5,928 6,422   7219 14 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of < 3 mm 4,940 N/A 4,940 5,434 5,928 6,422   7219 21 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of > 10 mm 4,940 N/A 4,940 5,434 5,928 6,422   7219 22 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 4,75 mm and <= 10 mm 4,940 N/A 4,940 5,434 5,928 6,422   7219 23 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 3 mm and < 4,75 mm 4,940 N/A 4,940 5,434 5,928 6,422   7219 24 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of < 3 mm 4,940 N/A 4,940 5,434 5,928 6,422   7219 31 00 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 4,75 mm 5,020 N/A 5,020 5,522 6,024 6,526   7219 32 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 3 mm but < 4,75 mm 5,020 N/A 5,020 5,522 6,024 6,526   7219 33 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of > 1 mm but < 3 mm 5,020 N/A 5,020 5,522 6,024 6,526   7219 34 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 0,5 mm but <= 1 mm 5,020 N/A 5,020 5,522 6,024 6,526   7219 35 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of < 0,5 mm 5,020 N/A 5,020 5,522 6,024 6,526   7219 90 Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked 5,020 N/A 5,020 5,522 6,024 6,526   7220 Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7220 11 00 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of >= 4,75 mm 4,940 N/A 4,940 5,434 5,928 6,422   7220 12 00 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of < 4,75 mm 4,940 N/A 4,940 5,434 5,928 6,422   7220 20 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" 5,020 N/A 5,020 5,522 6,024 6,526   7220 90 Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked 5,020 N/A 5,020 5,522 6,024 6,526   7221 Bars and rods of stainless steel, hot-rolled, in irregularly wound coils 4,820 N/A 4,820 5,302 5,784 6,266   7222 Other bars and rods of stainless steel; angles, shapes and sections of stainless steel, n.e.s. see below see below see below see below see below see below   7222 11 Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only hot-extruded, of circular cross-section 4,820 N/A 4,820 5,302 5,784 6,266   7222 19 Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only extruded (excl. of circular cross-section) 4,820 N/A 4,820 5,302 5,784 6,266   7222 20 Other bars and rods of stainless steel, not further worked than cold-formed or cold-finished 4,820 N/A 4,820 5,302 5,784 6,266   7222 30 Other bars and rods of stainless steel, cold-formed or cold-finished and further worked, or not further worked than forged, or forged, or hot-formed by other means and further worked, n.e.s. 5,006 N/A 5,006 5,507 6,007 6,508   7222 40 Angles, shapes and sections of stainless steel, n.e.s. 4,820 N/A 4,820 5,302 5,784 6,266   7223 Wire of stainless steel, in coils (excl. bars and rods) see below see below see below see below see below see below   7223 00 Wire of stainless steel, in coils (excl. bars and rods) 4,820 N/A 4,820 5,302 5,784 6,266   7224 Steel, alloy, other than stainless, in ingots or other primary forms, semi-finished products of alloy steel other than stainless (excl. waste and scrap in ingot form, and products obtained by continuous casting) see below see below see below see below see below see below   7224 10 Steel, alloy, other than stainless, in ingots or other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) 5,589 N/A 5,589 6,148 6,707 7,266 (F) 7224 90 02 Semi-finished products of tool steel 5,500 N/A 5,500 6,050 6,600 7,150 (F) 7224 90 03 Semi-finished products of high-speed steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting the width measuring < twice the thickness 5,500 N/A 5,500 6,050 6,600 7,150 (F) 7224 90 05 Semi-finished products of steel containing by weight <= 0,7% of carbon, 0,5% to 1,2% of manganese, 0,6% to 2,3% of silicon, or of steel containing by weight >= 0,0008% of boron with any other element < the minimum content referred to in Note 1 f to chapter 72, of square or rectangular cross-section, hot rolled or obtained by continuous casting, the width measuring < twice the thickness 5,500 N/A 5,500 6,050 6,600 7,150 (F) 7224 90 07 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring < twice the thickness (excl. of tool steel, high-speed steel and articles of subheading 7224.90.05) 5,500 N/A 5,500 6,050 6,600 7,150 (F) 7224 90 14 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring >= twice the thickness (excl. of tool steel) 5,500 N/A 5,500 6,050 6,600 7,150 (F) 7224 90 18 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, forged (excl. of tool steel) 5,589 N/A 5,589 6,148 6,707 7,266 (F) 7224 90 31 Semi-finished products of steel containing by weight 0,9% to 1,15% carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting 5,500 N/A 5,500 6,050 6,600 7,150 (F) 7224 90 38 Semi-finished products of alloy steel, other than stainless steel, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting (excl. of tool steel and products containing by weight 0,9% to 1,15% of carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum) 5,500 N/A 5,500 6,050 6,600 7,150 (F) 7224 90 90 Semi-finished products of alloy steel, other than stainless steel, forged (excl. of tool steel and products of square or rectangular, circular or polygamol cross-section) 5,589 N/A 5,589 6,148 6,707 7,266 (F) 7225 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7225 11 00 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, grain-oriented 7,100 N/A 7,100 7,810 8,520 9,230 (C) 7225 19 10 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, hot-rolled 5,500 N/A 5,500 6,050 6,600 7,150 (C) 7225 19 90 Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, cold-rolled "cold-reduced", non-grain-oriented 5,588 N/A 5,588 6,147 6,706 7,264 (F) 7225 30 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, in coils (excl. products of silicon-electrical steel) 5,500 N/A 5,500 6,050 6,600 7,150 (F) 7225 40 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, not in coils (excl. products of silicon-electrical steel) 5,500 N/A 5,500 6,050 6,600 7,150 (F) 7225 50 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of silicon-electrical steel) 5,588 N/A 5,588 6,147 6,706 7,264 (F) 7225 91 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and electrolytically plated or coated with zinc (excl. products of silicon-electrical steel) 5,588 N/A 5,588 6,147 6,706 7,264 (F) 7225 92 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and plated or coated with zinc (excl. electrolytically plated or coated and products of silicon-electrical steel) 5,588 N/A 5,588 6,147 6,706 7,264 (F) 7225 99 00 Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. plated or coated with zinc and products of silicon-electrical steel) 5,588 N/A 5,588 6,147 6,706 7,264 (F) 7226 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" see below see below see below see below see below see below   7226 11 00 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", grain-oriented 7,100 N/A 7,100 7,810 8,520 9,230 (C) 7226 19 10 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, not further worked than hot-rolled 5,500 N/A 5,500 6,050 6,600 7,150 (C) 7226 19 80 Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, cold-rolled "cold-reduced", whether or not further worked, or hot-rolled and further worked, non-grain-oriented 5,588 N/A 5,588 6,147 6,706 7,264 (F) 7226 20 00 Flat-rolled products of high-speed steel, of a width of <= 600 mm, hot-rolled or cold-rolled "cold-reduced" 5,588 N/A 5,588 6,147 6,706 7,264 (F) 7226 91 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than hot-rolled (excl. products of high-speed steel or silicon-electrical steel) 5,500 N/A 5,500 6,050 6,600 7,150 (F) 7226 92 00 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of high-speed steel or silicon-electrical steel) 5,590 N/A 5,590 6,149 6,708 7,267 (F) 7226 99 Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. products of high-speed steel or silicon-electrical steel) 5,588 N/A 5,588 6,147 6,706 7,264 (F) 7227 Bars and rods of alloy steel other than stainless, hot-rolled, in irregularly wound coils 5,400 N/A 5,400 5,940 6,480 7,020 (C)/(F) 7228 Other bars and rods of alloy steel other than stainless, angles, shapes and sections of alloy steel other than stainless, n.e.s.; hollow drill bars and rods, of alloy or non-alloy steel see below see below see below see below see below see below   7228 10 20 Bars and rods of high-speed steel, not further worked than hot-rolled, hot-drawn or extruded, and hot-rolled, hot-drawn or extruded, not further worked than clad (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 5,400 N/A 5,400 5,940 6,480 7,020 (F) 7228 10 50 Bars and rods of high-speed steel, forged (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 5,589 N/A 5,589 6,148 6,707 7,266 (F) 7228 10 90 Bars and rods of high-speed steel, not further worked than cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked (excl. forged products, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 5,400 N/A 5,400 5,940 6,480 7,020 (F) 7228 20 Bars and rods of silico-manganese steel (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 5,400 N/A 5,400 5,940 6,480 7,020 (F) 7228 30 Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 5,400 N/A 5,400 5,940 6,480 7,020 (C)/(F) 7228 40 Bars and rods of alloy steel other than stainless, not further worked than forged (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 5,589 N/A 5,589 6,148 6,707 7,266 (F) 7228 50 Bars and rods of alloy steel other than stainless, not further worked than cold-formed or cold-finished (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 5,400 N/A 5,400 5,940 6,480 7,020 (C)/(F) 7228 60 Bars and rods of alloy steel other than stainless, cold-formed or cold-finished and further worked or hot-formed and further worked, n.e.s. (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 5,400 N/A 5,400 5,940 6,480 7,020 (F) 7228 70 Angles, shapes and sections of alloy steel other than stainless, n.e.s. 5,400 N/A 5,400 5,940 6,480 7,020 (F) 7228 80 00 Hollow drill bars and rods, of alloy or non-alloy steel 5,400 N/A 5,400 5,940 6,480 7,020 (F) 7229 Wire of alloy steel other than stainless, in coils (excl. bars and rods) 5,400 N/A 5,400 5,940 6,480 7,020 (C)/(F) 7301 Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel 4,063 N/A 4,063 4,469 4,876 5,282 (C) 7302 Railway or tramway track construction material of iron or steel, the following : rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers "cross-ties", fish-plates, chairs, chair wedges, sole plates "base plates", rail clips, bedplates, ties and other material specialised for jointing or fixing rails 4,887 N/A 4,887 5,376 5,864 6,353 (C) 7303 Tubes, pipes and hollow profiles, of cast iron see below see below see below see below see below see below   7303 00 Tubes, pipes and hollow profiles, of cast iron 4,150 N/A 4,150 4,565 4,980 5,395   7304 Tubes, pipes and hollow profiles, seamless, of iron or steel (excl. products of cast iron) see below see below see below see below see below see below   7304 11 00 Line pipe of a kind used for oil or gas pipelines, seamless, of stainless steel 5,184 N/A 5,184 5,703 6,221 6,739   7304 19 Line pipe of a kind used for oil or gas pipelines, seamless, of iron or steel (excl. products of stainless steel or of cast iron) 3,981 N/A 3,981 4,379 4,777 5,175 (C) 7304 22 00 Drill pipe, seamless, of stainless steel, of a kind used in drilling for oil or gas 5,184 N/A 5,184 5,703 6,221 6,739   7304 23 00 Drill pipe, seamless, of a kind used in drilling for oil or gas, of iron or steel (excl. products of stainless steel or of cast iron) 3,981 N/A 3,981 4,379 4,777 5,175 (C) 7304 24 00 Casing and tubing, seamless, of a kind used for drilling for oil or gas, of stainless steel 5,184 N/A 5,184 5,703 6,221 6,739   7304 29 Casing and tubing, seamless, of iron or steel, of a kind used in drilling for oil or gas (excl. products of cast iron) 3,981 N/A 3,981 4,379 4,777 5,175 (C) 7304 31 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" (excl. cast iron products and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used for drilling for oil or gas) 3,981 N/A 3,981 4,379 4,777 5,175 (C) 7304 39 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, not cold-drawn or cold-rolled "cold-reduced" (excl. cast iron products, line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas) 3,981 N/A 3,981 4,379 4,777 5,175 (C) 7304 41 00 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas) 5,184 N/A 5,184 5,703 6,221 6,739   7304 49 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines or of a kind used for drilling for oil or gas) 5,184 N/A 5,184 5,703 6,221 6,739   7304 51 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil) 3,878 N/A 3,878 4,266 4,654 5,041 (F) 7304 59 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil) 3,878 N/A 3,878 4,266 4,654 5,041 (C)/(F) 7304 90 00 Tubes, pipes and hollow profiles, seamless, of non-circular cross-section, of iron or steel (excl. products of cast iron) 3,981 N/A 3,981 4,379 4,777 5,175 (C) 7305 Tubes and pipes, having circular cross-sections and an external diameter of > 406,4 mm, of flat-rolled products of iron or steel "e.g., welded, riveted or similarly closed" 4,060 N/A 4,060 4,466 4,872 5,278 (C) 7306 Tubes, pipes and hollow profiles "e.g., open seam or welded, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless tubes and pipes and tubes having internal and external circular cross-sections and an external diameter of > 406,4 mm) see below see below see below see below see below see below   7306 11 00 Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm 5,369 N/A 5,369 5,906 6,443 6,980   7306 19 00 Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron) 4,141 N/A 4,141 4,555 4,969 5,383 (C) 7306 21 00 Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm 5,369 N/A 5,369 5,906 6,443 6,980   7306 29 00 Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron) 4,141 N/A 4,141 4,555 4,969 5,383 (C) 7306 30 12 Precision tubes, welded, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" 4,141 N/A 4,141 4,555 4,969 5,383 (C) 7306 30 18 Precision tubes, welded, of circular cross-section, of iron or non-alloy steel (excl. cold-drawn or cold-rolled) 4,091 N/A 4,091 4,500 4,909 5,318   7306 30 41 Threaded or threadable tubes "gas pipe", welded, of circular cross-section, of iron or non-alloy steel, plated or coated with zinc 4,141 N/A 4,141 4,555 4,969 5,383 (C) 7306 30 49 Threaded or threadable tubes "gas pipe", welded, of circular cross-section, of iron or non-alloy steel (excl. products plated or coated with zinc) 4,141 N/A 4,141 4,555 4,969 5,383 (C) 7306 30 72 Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel, of an external diameter of <= 168,3 mm, plated or coated with zinc (excl. line pipe of a kind used for oil or gas pipelines or casing and tubingof a kind used in drilling for oil or gas) 4,141 N/A 4,141 4,555 4,969 5,383 (C) 7306 30 77 Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel of an external diameter of <= 168,3 mm (excl. plated or coated with zinc and line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used in drilling for oil or gas, precision tubes and threaded or threadable tubes "gas pipe") 4,141 N/A 4,141 4,555 4,969 5,383 (C) 7306 30 80 Tubes, pipes and hollow profiles, welded, having a circular cross-section, of iron or steel, of an external diameter of > 168,3 mm but <= 406,4 mm (excl. line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, or precision steel tubes, electrical conduit tubes or threaded or threadable tubes "gas pipe") 4,141 N/A 4,141 4,555 4,969 5,383 (C) 7306 40 20 Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. products having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) 5,369 N/A 5,369 5,906 6,443 6,980   7306 40 80 Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel (excl. products cold-drawn or cold-rolled "cold-reduced", tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) 5,296 N/A 5,296 5,826 6,355 6,885   7306 50 21 Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" 4,129 N/A 4,129 4,541 4,954 5,367 (F) 7306 50 29 Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless (excl. cold-drawn or cold-rolled) 4,057 N/A 4,057 4,462 4,868 5,273 (F) 7306 50 80 Tubes, pipes and hollow profiles, welded, of circular cross-section, of alloy steel other than stainless (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and precision steel tubes) 4,129 N/A 4,129 4,541 4,954 5,367 (F) 7306 61 10 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel 5,369 N/A 5,369 5,906 6,443 6,980   7306 61 92 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of <= 2 mm 4,141 N/A 4,141 4,555 4,969 5,383 (C) 7306 61 99 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of > 2 mm 4,141 N/A 4,141 4,555 4,969 5,383 (C) 7306 69 10 Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) 5,369 N/A 5,369 5,906 6,443 6,980   7306 69 90 Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of iron or steel other than stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) 4,141 N/A 4,141 4,555 4,969 5,383 (C) 7306 90 00 Tubes, pipes and hollow profiles "e.g., open seam, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless or welded tubes and pipes and tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm) 4,141 N/A 4,141 4,555 4,969 5,383 (C) 7307 Tube or pipe fittings "e.g. couplings, elbows, sleeves", of iron or steel see below see below see below see below see below see below   7307 11 Tube or pipe fittings of non-malleable cast iron 3,929 N/A 3,929 4,322 4,715 5,108   7307 19 10 Tube or pipe fittings of cast iron (excl. of non-malleable) 3,929 N/A 3,929 4,322 4,715 5,108   7307 19 90 Cast tube or pipe fittings of steel 4,053 N/A 4,053 4,459 4,864 5,269 (C) 7307 21 00 Flanges of stainless steel (excl. cast products) 4,498 N/A 4,498 4,948 5,398 5,848   7307 22 Threaded elbows, bends and sleeves of stainless steel (excl. cast products) 4,498 N/A 4,498 4,948 5,398 5,848   7307 23 Butt welding tube or pipe fittings of stainless steel (excl. cast products) 4,498 N/A 4,498 4,948 5,398 5,848   7307 29 Tube or pipe fittings of stainless steel (excl. cast products, flanges, threaded elbows, bends and sleeves and butt weldings fittings) 4,498 N/A 4,498 4,948 5,398 5,848   7307 91 00 Flanges of iron or steel (excl. cast or stainless products) 4,072 N/A 4,072 4,480 4,887 5,294 (C) 7307 92 Threaded elbows, bends and sleeves, of stainless steel (excl. cast or stainless products) 4,072 N/A 4,072 4,480 4,887 5,294 (C) 7307 93 Butt welding fittings of iron or steel (excl. cast iron or stainless steel products, and flanges) 4,072 N/A 4,072 4,480 4,887 5,294 (C) 7307 99 Tube or pipe fittings, of iron or steel (excl. cast iron or stainless steel products; flanges; threaded elbows, bends and sleeves; butt welding fittings) 4,072 N/A 4,072 4,480 4,887 5,294 (C) 7308 Structures and parts of structures "e.g., bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns", of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel (excl. prefabricated buildings of heading 9406) 5,064 N/A 5,064 5,570 6,077 6,583 (C) 7309 Reservoirs, tanks, vats and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of > 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated (excl. containers specifically constructed or equipped for one or more types of transport) 5,468 N/A 5,468 6,015 6,562 7,109 (C) 7310 Tanks, casks, drums, cans, boxes and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of <= 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated, n.e.s. 4,228 N/A 4,228 4,651 5,074 5,497 (C) 7311 Containers of iron or steel, for compressed or liquefied gas (excl. containers specifically constructed or equipped for one or more types of transport) see below see below see below see below see below see below   7311 00 Containers of iron or steel, for compressed or liquefied gas (excl. containers specifically constructed or equipped for one or more types of transport) 5,385 N/A 5,385 5,924 6,462 7,001 (C) 7318 Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers, incl. spring washers, and similar articles, of iron or steel (excl. lag screws, stoppers, plugs and the like, threaded) see below see below see below see below see below see below   7318 11 00 Coach screws of iron or steel 3,962 N/A 3,962 4,358 4,755 5,151 (C) 7318 12 10 Wood screws of stainless steel (excl. coach screws) 5,119 N/A 5,119 5,631 6,143 6,655 (C) 7318 12 90 Wood screws of iron or steel other than stainless (excl. coach screws) 3,962 N/A 3,962 4,358 4,755 5,151 (C) 7318 13 00 Screw hooks and screw rings, of iron or steel 3,962 N/A 3,962 4,358 4,755 5,151 (C) 7318 14 10 Self-tapping screws, of stainless steel (excl. wood screws) 5,119 N/A 5,119 5,631 6,143 6,655 (C) 7318 14 91 Spaced-thread screws of iron or steel other than stainless 3,962 N/A 3,962 4,358 4,755 5,151 (C) 7318 14 99 Self-tapping screws of iron or steel other than stainless (excl. spaced-thread screws and wood screws) 3,962 N/A 3,962 4,358 4,755 5,151 (C) 7318 15 Threaded screws and bolts, of iron or steel, whether or not with their nuts and washers (excl. coach screws and other wood screws, screw hooks and screw rings, self-tapping screws, lag screws, stoppers, plugs and the like, threaded) 4,801 N/A 4,801 5,281 5,761 6,242 (C) 7318 16 Nuts of iron or steel 4,693 N/A 4,693 5,162 5,632 6,101 (C) 7318 19 00 Threaded articles, of iron or steel, n.e.s. 3,962 N/A 3,962 4,358 4,755 5,151 (C) 7318 21 00 Spring washers and other lock washers, of iron or steel 3,962 N/A 3,962 4,358 4,755 5,151 (C) 7318 22 00 Washers of iron or steel (excl. spring washers and other lock washers) 4,322 N/A 4,322 4,754 5,186 5,618 (C) 7318 23 00 Rivets of iron or steel (excl. tubular and bifurcated rivets for particular uses) 3,963 N/A 3,963 4,360 4,756 5,152 (C) 7318 24 00 Cotters and cotter pins, of iron or steel 3,962 N/A 3,962 4,358 4,755 5,151 (C) 7318 29 00 Non-threaded articles, of iron or steel 3,962 N/A 3,962 4,358 4,755 5,151 (C) 7326 Articles of iron or steel, n.e.s. (excl. cast articles) see below see below see below see below see below see below   7326 11 00 Grinding balls and similar articles for mills, of iron or steel, forged or stamped, but not further worked 4,080 N/A 4,080 4,488 4,896 5,303 (C) 7326 19 Articles of iron or steel, forged or stamped, but not further worked, n.e.s. (excl. grinding balls and similar articles for mills) 4,080 N/A 4,080 4,488 4,896 5,303 (C) 7326 20 00 Articles of iron or steel wire, n.e.s. 4,051 N/A 4,051 4,456 4,861 5,266 (C) 7326 90 30 Ladders and steps, of iron or steel 4,051 N/A 4,051 4,456 4,861 5,266 (C) 7326 90 40 Pallets and similar platforms for handling goods, of iron or steel 4,051 N/A 4,051 4,456 4,861 5,266 (C) 7326 90 50 Reels for cables, piping and the like, of iron or steel 4,051 N/A 4,051 4,456 4,861 5,266 (C) 7326 90 60 Ventilators, non-mechanical, guttering, hooks and like articles used in the building industry, n.e.s., of iron or steel 4,051 N/A 4,051 4,456 4,861 5,266 (C) 7326 90 92 Articles of iron or steel, open-die forged, n.e.s. 4,080 N/A 4,080 4,488 4,896 5,303 (C) 7326 90 94 Articles of iron or steel, closed-die forged, n.e.s. 4,080 N/A 4,080 4,488 4,896 5,303 (C) 7326 90 96 Sintered articles of iron or steel, n.e.s. 4,080 N/A 4,080 4,488 4,896 5,303 (C) 7326 90 98 Articles of iron or steel, n.e.s. 4,151 N/A 4,151 4,566 4,981 5,396 (C) ( 1 )   Commission Implementing Regulation (EU) 2025/2620 of 16 December 2025 laying down rules for the application of Regulation (EU) 2023/956 of the European Parliament and of the Council as regards the calculation of the free allocation adjustment to the number of CBAM certificates to be surrendered ( OJ L, 2025/2620, 22.12.2025, ELI: http://data.europa.eu/eli/reg_impl/2025/2620/oj ).