(1) The title of this Order is the Smoke Control Areas (Exempted Fireplaces) (Wales) Order 2008 and it comes into force on 31 December 2008.
(2) This Order applies in relation to Wales.
SourceS.I. 2008/3101 (W.)
The Smoke Control Areas (Exempted Fireplaces) (Wales) Order 2008 (S.I. 2008/3101 (W.))
Section 20 of the Clean Air Act 1993 (“the 1993 Act”) places a general prohibition on the emission of smoke in smoke control areas.
Data synced
The classes of fireplace described in the Schedule are, upon the conditions therein specified, exempted from the provisions of Section 20 of the Clean Air Act 1993 (which prohibits smoke emissions in smoke control areas).
The Smoke Control Areas (Exempted Fireplaces) (Wales) Order 2006 ( S.I. 2006/2980 (W.271) ) is revoked.
Schedules
SCHEDULE — CLASSES OF FIREPLACE WHICH ARE EXEMPT
The fireplace must be installed, maintained and operated in accordance with the manufacturer’s and Wood Energy Limited’s instructions entitled Binder Equipment Installation, Commissioning and Maintenance dated 17 May 2005, reference WELBinderManualrev0.doc, revision 0.
The fireplace must be installed, maintained and operated in accordance with the manufacturer’s and Wood Energy Limited’s instructions entitled Binder Equipment Installation, Commissioning and Maintenance dated 17 May 2005, reference WELBinderManualrev0.doc, revision 0.
The fireplace must be installed, maintained and operated in accordance with the manufacturer’s and Wood Energy Limited’s instructions entitled Binder Equipment Installation, Commissioning and Maintenance dated 17 May 2005, reference WELBinderManualrev0.doc, revision 0.
The fireplace must be installed, maintained and operated in accordance with the manufacturer’s and Wood Energy Limited’s instructions entitled Binder Equipment Installation, Commissioning and Maintenance dated 17 May 2005, reference WELBinderManualrev0.doc, revision 0.
The fireplace must be installed, maintained and operated in accordance with the manufacturer’s instructions dated April 2005, reference Bedienungsanleitung Englisch v2.0 doc.
The fireplace must be installed, maintained and operated in accordance with the manufacturer’s instructions dated April 2005, reference Bedienungsanleitung Englisch v2.0 doc.
The fireplace must be installed, maintained and operated in accordance with the manufacturer’s instructions entitled Operating Instructions Clearview Vision/Vision Inset/Pioneer & Solution dated 1 July 2006, reference V1/42, stamped and signed Smoke Control.
The fireplace must be installed, maintained and operated in accordance with the manufacturer’s instructions dated 20 February 2007, reference 161 505 27 06/1.
The fireplace must be installed, maintained and operated in accordance with the manufacturer’s instructions, reference PM250 Issue 1.
A permanent stop must be in place on the secondary air inlet to prevent closure beyond the 75 per cent open position.
The fireplace must be installed, maintained and operated in accordance with the manufacturer’s instructions dated 5 August 1998, reference A/22160 as amended by those dated 4 December 2004, reference D13.
The fireplace must be installed, maintained and operated in accordance with the manufacturer’s instructions dated 5 August 1998, reference A/22160 as amended by those dated 4 December 2004, reference D13.
The fireplace must be installed, maintained and operated in accordance with the manufacturer’s instructions dated 5 August 1998, reference A/22160 as amended by those dated 4 October 2004, reference GHD/DUN4B/1.
The fireplace must be installed, maintained and operated in accordance with the manufacturer’s instructions dated 4 December 2004, reference D13W.
The fireplace must be installed, maintained and operated in accordance with the manufacturer’s instructions dated 4 December 2004, reference D13W together with the manufacturer’s instructions dated 4 October 2004, reference GHD/DUN4B/1.
The fireplace must be installed, maintained and operated in accordance with the manufacturer’s instructions dated 5 March 2007, reference 004275101 011.
The fireplace must be installed, maintained and operated in accordance with the manufacturer’s instructions dated 2 October 2006, reference 004275115 REV 005.
The fireplace must be installed, maintained and operated in accordance with the manufacturer’s instructions dated 28 August 2006, reference 004275128 REV 002.
The fireplace must be installed, maintained and operated in accordance with the manufacturer’s instructions dated 12 July 2006, reference 004275110 REV 011.
The fireplace must be installed, maintained and operated in accordance with the manufacturer’s instructions dated June 2005, reference Bedienungsanleitung Firematic V 1.1 ENG doc.
The fireplace must be installed in accordance with the manufacturer’s installation instructions dated November 2003, reference M 060 01 03. The fireplace must be maintained and operated in accordance with the manufacturer’s instructions dated August 2002, reference 99229a.
The fireplace must be installed in accordance with the manufacturer’s installation instructions dated November 2003, reference M 060 01 03.
The fireplace must be maintained and operated in accordance with the manufacturer’s instructions dated August 2002, reference 99229a.
The fireplace must be installed, maintained and operated in accordance with the manufacturer’s instructions dated August 2003, reference BO310003.
The fireplace must be installed, maintained and operated in accordance with the manufacturer’s instructions dated November 2004, reference B0340004.
The fireplace must be installed, maintained and operated in accordance with the manufacturer’s instructions dated January 2007, reference Gilles/0-145/1.
The fireplace must be installed, maintained and operated in accordance with the manufacturer’s instructions dated January 2007, reference Gilles/150-300/1.
The fireplace must be installed, maintained and operated in accordance with the manufacturer’s operating instructions dated January 2008, reference Gilles 360/1.
The fireplace must be installed, maintained and operated in accordance with the manufacturer’s operating instructions dated January 2008, reference Gilles 360/1
The fireplace must be installed, maintained and operated in accordance with the manufacturer’s technical information and installation instructions dated October 2005, reference 4 204794/00 and operating instructions dated January 2006, reference 4 204 793/01.
The fireplace must be installed, maintained and operated in accordance with the manufacturer’s technical information and installation instructions dated June 2007, reference 4 204 794/01 and 4 204 793/02.
The fireplace must be installed, maintained and operated in accordance with the manufacturer’s technical information and installation instructions dated January 2006, reference 4 205 194/00 and 4 205 193/00 dated June 2006.
The fireplace must be installed, maintained and operated in accordance with the manufacturer’s technical information and installation instructions dated November 2007, reference STUman/01.
The fireplace must be installed, maintained and operated in accordance with the manufacturer’s operating instructions dated June 2008, reference STU/man/01/1.
The fireplace must be installed, maintained and operated in accordance with the manufacturer’s instruction manual, reference PM 249 Issue 1. A permanent stop must be in place on the secondary inlet to prevent closure beyond the 75 per cent open position.
The fireplace must be installed, maintained and operated in accordance with Euroheat Distributors (HBS) Limited’s operational instructions dated November 2006, reference IN1 141 Ed B.
The fireplace must be installed, maintained and operated in accordance with the manufacturer’s instructions dated 14 May 2008, reference BA TDS-05.2008.
The fireplace must be installed, maintained and operated in accordance with the manufacturer’s instructions dated August 2005, reference BA TDS — 0805.
The fireplace must be installed, maintained and operated in accordance with the manufacturer’s instructions dated 30 June 2007, issue No. 3.
The fireplace must be installed, maintained and operated in accordance with the manufacturer’s instructions reference 07/08.
The fireplace must be installed, maintained and operated in accordance with the manufacturer’s instructions dated 10 January 2008, reference 72146800.
The fireplace must be installed, maintained and operated in accordance with the manufacturer’s instructions dated 4 February 2008, reference 72311200.
The fireplace must be installed, maintained and operated in accordance with the manufacturer’s instructions dated 4 September 2007, reference 72610400.
The fireplace must be installed, maintained and operated in accordance with the manufacturer’s instructions dated 1 January 2000, reference 72345600.
The fireplace must be installed, maintained and operated in accordance with Euroheat Distributors (HBS) Limited’s operational instructions dated January 2007, reference IN1 116 Edition D.
The fireplace must be installed, maintained and operated in accordance with Euroheat Distributors (HBS) Limited’s operational instructions dated November 2006, reference IN1 141 Edition B.
The fireplace must be installed, maintained and operated in accordance with Euroheat Distributors (HBS) Limited’s operational instructions dated November 2006, reference IN1 141 Edition B.
The fireplace must be installed, maintained and operated in accordance with Euroheat Distributors (HBS) Limited’s operational instructions dated January 2007, reference IN1 116 Edition D.
The fireplace must be installed, maintained and operated in accordance with Euroheat Distributors (HBS) Limited’s operational instructions dated November 2006, reference IN1 141 Edition B.
The fireplace must be installed, maintained and operated in accordance with Euroheat Distributors (HBS) Limited’s operational instructions dated April 2007, reference IN1 180 Edition C.
The fireplace must be installed, maintained and operated in accordance with Euroheat Distributors (HBS) Limited’s operational instructions dated January 2007, reference IN1 116 Edition C.
The fireplace must be installed, maintained and operated in accordance with the manufacturer’s instructions dated February 2007, reference PE/HB/001.E.
The fireplace must be installed, maintained and operated in accordance with the manufacturer’s instructions dated March 2008, reference PBV 2000 CMP 1.4 (V2.31).
The fireplace must be installed, maintained and operated in accordance with the manufacturer’s instructions dated 25 October 2004, references:
The fireplace must be installed, maintained and operated in accordance with the manufacturer’s instructions dated 9 October 2003, reference 250-6931B.
The fireplace must be installed, maintained and operated in accordance with the manufacturer’s instructions dated 4 June 2003, reference 7004-187.
The fireplace must be installed, maintained and operated in accordance with the manufacturer’s instructions dated 8 July 2003, reference 7006-186.
The fireplace must be installed, maintained and operated in accordance with the manufacturer’s instructions dated 15 November 2007, entitled “Scan Andersen 4-5”, reference 09/05-GB
A permanent stop must be in place on the secondary air inlet to prevent closure beyond 20mm.
The fireplace must be installed, maintained and operated in accordance with the manufacturer’s instructions reference, PM176 — issue 4.
A permanent stop must be in place on the secondary air inlet to prevent closure beyond the 50 per cent open position.
The fireplace must be installed, maintained and operated in accordance with the manufacturer’s instructions dated August 2003, reference BA-USV 0803.
The fireplaces must be installed, maintained and operated in accordance with the manufacturer’s instructions dated 28 July 2003 reference BA-USP 0703.
The fireplace must be installed, maintained and operated in accordance with the manufacturer’s instructions dated 2007, reference WF15 — WF16 — WF20 along with supplementary instructions reference 01 wfuk.2207.
A permanent stop must be in place on the secondary air inlet to prevent closure beyond 50mm.
The fireplace must be installed, maintained and operated in accordance with the manufacturer’s instructions dated August 2008, reference 092125/00.
The fireplace must be installed, maintained and operated in accordance with the manufacturer’s instructions dated May 2008, reference 0916197/00.
The fireplace must be installed, maintained and operated in accordance with the manufacturer’s instructions dated 19 January 2005, reference WT10 and WT15.
No fuel is to be used other than wood pellets or wood chips, but excluding any such pellets or chips which contain halogenated organic compounds or heavy metals as a result of treatment with wood-preservatives or coatings.
No fuel is to be used other than wood pellets or wood chips, but excluding any such pellets or chips which contain halogenated organic compounds or heavy metals as a result of treatment with wood-preservatives or coatings.
No fuel is to be used other than wood pellets or wood chips, but excluding any such pellets or chips which contain halogenated organic compounds or heavy metals as a result of treatment with wood-preservatives or coatings.
No fuel is to be used other than wood pellets or wood chips, but excluding any such pellets or chips which contain halogenated organic compounds or heavy metals as a result of treatment with wood-preservatives or coatings.
No fuel is to be used other than wood chips, wood pellets, or planed wood shavings, but excluding any such chips or pellets or shavings which contain halogenated organic compounds or heavy metals as a result of treatment with wood preservatives or coatings.
No fuel is to be used other than wood chips, wood pellets, or wood shavings but excluding any such pellets or chips or shavings which contain halogenated organic compounds or heavy metals as a result of treatment with wood preservatives or coatings.
No fuel is to be used other than air-dried wood logs, but excluding any such logs which contain halogenated organic compounds or heavy metals as a result of treatment with wood preservatives or coatings.
No fuel is to be used other than wood pellets but excluding any such pellets which contain halogenated organic compounds or heavy metals as a result of treatment with wood preservatives or coatings.
No fuel is to be used other than untreated dry wood but excluding any such wood which contains halogenated organic compounds or heavy metals as a result of treatment with wood preservatives or coatings.
No fuel is to be used other than untreated dry wood but excluding any such wood which contains halogenated organic compounds or heavy metals as a result of treatment with wood preservatives or coatings.
Peat or peat briquettes with, in either case, less than 25% moisture.
Union Coal Briketts, manufactured by Rheinbraun AG of Germany comprising lignite compressed into briquettes of approx. 15cm in length with square ends and with a sulphur content not exceeding 1% of the total weight.
CPL wildfire, manufactured by Coal Products Ltd., Immingham, which comprise bituminous coal with a volatile content of 32—36% (as to approx. 96% of the total weight) and a cold cure resin binder (as to the remaining weight) are manufactured from those constituents by a process involving roll pressing, have an average weight of either 80—90 grams or 160—170 grams, and have a sulphur content not exceeding 1.8% of the total weight.
No fuel is to be used other than untreated dry wood but excluding any such wood which contains halogenated organic compounds or heavy metals as a result of treatment with wood preservatives or coatings.
Peat or peat briquettes with, in either case, less than 25% moisture.
Union Coal Briketts, manufactured by Rheinbraun AG of Germany comprising lignite compressed into briquettes of approx. 15cm in length with square ends and with a sulphur content not exceeding 1% of the total weight.
CPL wildfire, manufactured by Coal Products Ltd., Immingham, which comprise bituminous coal with a volatile content of 32—36% (as to approx. 96% of the total weight) and a cold cure resin binder (as to the remaining weight) are manufactured from those constituents by a process involving roll pressing, have an average weight of either 80—90 grams or 160—170 grams, and have a sulphur content not exceeding 1.8% of the total weight.
No fuel is to be used other than untreated dry wood but excluding any such wood which contains halogenated organic compounds or heavy metals as a result of treatment with wood preservatives or coatings.
Peat or peat briquettes with, in either case, less than 25% moisture.
Union Coal Briketts, manufactured by Rheinbraun AG of Germany comprising lignite compressed into briquettes of approx. 15cm in length with square ends and with a sulphur content not exceeding 1% of the total weight.
CPL wildfire, manufactured by Coal Products Ltd., Immingham, which comprise bituminous coal with a volatile content of 32—36% (as to approx. 96% of the total weight) and a cold cure resin binder (as to the remaining weight) are manufactured from those constituents by a process involving roll pressing, have an average weight of either 80—90 grams or 160—170 grams, and have a sulphur content not exceeding 1.8% of the total weight.
No fuel is to be used other than untreated dry wood but excluding any such wood which contains halogenated organic compounds or heavy metals as a result of treatment with wood preservatives or coatings.
No fuel is to be used other than untreated dry wood but excluding any such wood which contains halogenated organic compounds or heavy metals as a result of treatment with wood preservatives or coatings.
No fuel is to be used other than wood pellets, but excluding any such pellets which contain halogenated organic compounds or heavy metals as a result of treatment with wood preservatives or coatings.
No fuel is to be used other than wood pellets, but excluding any such pellets which contain halogenated organic compounds or heavy metals as a result of treatment with wood preservatives or coatings.
No fuel is to be used other than wood pellets, but excluding any such pellets which contain halogenated organic compounds or heavy metals as a result of treatment with wood preservatives or coatings.
No fuel shall be used other than wood pellets, but excluding any such pellets which contain halogenated organic compounds or heavy metals as a result of treatment with wood preservatives or coatings.
No fuel is to be used other than chipped wood, wood pellets, or planed wood shavings, but excluding any such wood, pellets or shavings which contain halogenated organic compounds or heavy metals as a result of treatment with wood preservatives or coatings.
No fuel is to be used other than wood chips with less than 35 per cent moisture content that meet ONORM (a) M 7133; 1998 size class G30 but excluding any such chips which contain halogenated organic compounds or heavy metals as a result of treatment with wood preservatives or coatings.
No fuel is to be used other than wood chips with less than 35 per cent moisture content that meet ONORM (a) M 7133; 1998 size class G30 but excluding any such chips which contain halogenated organic compounds or heavy metals as a result of treatment with wood preservatives or coatings.
No fuel is to be used other than wood pellets, or wood chips, but excluding any such pellets or chips which contain halogenated organic compounds or heavy metals as a result of treatment with wood preservatives or coatings.
No fuel is to be used other than wood pellets, or wood chips, but excluding any such pellets or chips which contain halogenated organic compounds or heavy metals as a result of treatment with wood preservatives or coatings.
No fuel is to be used other than wood pellets, or wood chips, but excluding any such pellets or chips which contain halogenated organic compounds or heavy metals as a result of treatment with wood preservatives or coatings.
No fuel is to be used other than wood pellets, or wood chips, but excluding any such pellets or chips which contain halogenated organic compounds or heavy metals as a result of treatment with wood preservatives or coatings.
No fuel is to be used other than wood pellets or wood chips, but excluding any such pellets or chips which contain halogenated organic compounds or heavy metals as a result of treatment with wood preservatives or coatings.
No fuel is to be used other than wood pellets or wood chips, but excluding any such pellets or chips which contain halogenated organic compounds or heavy metals as a result of treatment with wood preservatives or coatings.
No fuel is to be used other than wood pellets, but excluding any such pellets which contain halogenated organic compounds or heavy metals as a result of treatment with wood preservatives or coatings.
No fuel is to be used other than 6mm diameter wood pellets but excluding any such pellets which contain halogenated organic compounds or heavy metals as a result of treatment with wood preservatives or coatings.
No fuel is to be used other than Wood logs with less than 20% moisture but excluding any such logs which contain halogenated organic compounds or heavy metals as a result of treatment with wood preservatives or coatings.
No fuel is to be used other than 6mm diameter wood pellets but excluding any such pellets which contain halogenated organic compounds or heavy metals as a result of treatment with wood preservatives or coatings.
No fuel is to be used other than 6mm diameter wood pellets, but excluding any such pellets which contain halogenated organic compounds or heavy metals as a result of treatment with wood preservatives or coatings.
No fuel is to be used other than untreated dry wood but excluding any such wood which contains halogenated organic compounds or heavy metals as a result of treatment with wood preservatives or coatings.
No fuel is to be used other than untreated dry wood but excluding any such wood which contains halogenated organic compounds or heavy metals as a result of treatment with wood preservatives or coatings.
No fuel is to be used other than wood pellets or wood chips but excluding any such pellets or chips which contain halogenated organic compounds or heavy metals as a result of treatment with wood preservatives or coatings.
No fuel is to be used other than wood pellets or wood chips, but excluding any such pellets or chips which contain halogenated organic compounds or heavy metals as a result of treatment with wood preservatives or coatings.
No fuel is to be used other than seasoned logs of less than 20 per cent moisture and of a maximum length of 350mm, but excluding any such logs which contain halogenated organic compounds or heavy metals as a result of treatment with wood preservatives or coatings.
No fuel is to be used other than untreated wood with less than 20 per cent moisture content but excluding any such wood which contains halogenated organic compounds or heavy metals as a result of treatment with wood preservatives or coatings.
No fuel is to be used other than wood logs with less than 20 per cent moisture, but excluding any such logs which contain halogenated organic compounds or heavy metals as a result of treatment with wood preservatives or coatings.
No fuel is to be used other than wood logs with less than 20 per cent moisture, but excluding any such logs which contain halogenated organic compounds or heavy metals as a result of treatment with wood preservatives or coatings.
No fuel is to be used other than wood logs with less than 20 per cent moisture, but excluding any such logs which contain halogenated organic compounds or heavy metals as a result of treatment with wood preservatives or coatings.
No fuel is to be used other than untreated dry wood which has been split, stacked and air dried; or air dried wood briquettes but excluding any such wood which contains halogenated organic. compounds or heavy metals as a result of treatment with wood preservatives or coatings.
No fuel is to be used other than untreated dry wood but excluding any such wood which contains halogenated organic compounds or heavy metals as a result of treatment with wood preservatives or coatings.
No fuel is to be used other than untreated dry wood but excluding any such wood which contains halogenated organic compounds or heavy metals as a result of treatment with wood preservatives or coatings.
No fuel is to be used other than untreated dry wood but excluding any such wood which contains halogenated organic compounds or heavy metals as a result of treatment with wood preservatives or coatings.
No fuel is to be used other than untreated dry wood but excluding any such wood which contains halogenated organic compounds or heavy metals as a result of treatment with wood preservatives or coatings
No fuel is to be used other than untreated dry wood but excluding any such wood which contains halogenated organic compounds or heavy metals as a result of treatment with wood preservatives or coatings.
No fuel is to be used other than untreated dry wood but excluding any such wood which contains halogenated organic compounds or heavy metals as a result of treatment with wood preservatives or coatings.
No fuel is to be used other than untreated dry wood but excluding any such wood which contains halogenated organic compounds or heavy metals as a result of treatment with wood preservatives or coatings .
No fuel is to be used other than wood pellets with a maximum diameter of 6mm and a maximum length of 4cm but excluding any such pellets which contain halogenated organic compounds or heavy metals as a result of treatment with wood preservatives or coatings.
No fuel is to be used other than wood pellets with a maximum diameter of 6mm and a maximum length of 4cm but excluding any such pellets which contain halogenated organic compounds or heavy metals as a result of treatment with wood preservatives or coatings.
No fuel is to be used other than untreated dry wood but excluding any such wood which contains halogenated organic compounds or heavy metals as a result of treatment with wood preservatives or coatings.
No fuel is to be used other than dry cured untreated wood of maximum size 38.1 cm × 10.16 cm × 5.08 cm but excluding any such wood which contains halogenated organic compounds or heavy metals as a result of treatment with wood preservatives or coatings.
No fuel is to be used other than dry cured untreated wood of maximum size 38.1 cm × 10.16 cm × 5.08 cm but excluding any such wood which contains halogenated organic compounds or heavy metals as a result of treatment with wood preservatives or coatings.
No fuel is to be used other than dry cured untreated wood of maximum size 43.18 cm × 10.16 cm × 5.08 cm but excluding any such wood which contains halogenated organic compounds or heavy metals as a result of treatment with wood preservatives or coatings.
No fuel is to be used other than untreated dry wood but excluding any such wood which contains halogenated organic compounds or heavy metals as a result of treatment with wood preservatives or coatings.
No fuel is to be used other than untreated dry wood but excluding any such wood which contains halogenated organic compounds or heavy metals as a result of treatment with wood preservatives or coatings.
No fuel is to be used other than wood pellets or wood chips but excluding any such pellets or chips which contain halogenated organic compounds or heavy metals as a result of treatment with wood-preservatives or coatings.
No fuel is to be used other than wood pellets but excluding any such pellets which contain halogenated organic compounds or heavy metals as a result of treatment with wood-preservatives or coatings.
No fuel is to be used other than untreated dry wood, but excluding any such wood which contains halogenated organic compounds or heavy metals as a result of treatment with wood preservatives or coatings.
No fuel is to be used other than wood pellets but excluding any such wood pellets which contain halogenated organic compounds or heavy metals as a result of treatment with wood preservatives or coatings.
No fuel is to be used other than wood pellets but excluding any such pellets which contain halogenated organic compounds or heavy metals as a result of treatment with wood preservatives or coatings.
No fuel is to be used other than hardwood and softwood offcuts, but excluding any such offcuts which contain halogenated organic compounds or heavy metals as a result of treatment with wood preservatives or coatings.
Cite this legislation
- Official citation
- S.I. 2008/3101 (W.)
- Source
- legislation.gov.uk
- Data synced
- Licence
- OGL-3 ↗
The Smoke Control Areas (Exempted Fireplaces) (Wales) Order 2008 (legislation.gov.uk, OGL-3). Retrieved via LawPlayer, https://lawplayer.com/uk/act/wsi-2008-3101
This text is synced from legislation.gov.uk. In case of any discrepancy, the official version prevails.
Related legislation
Enabling legislation
Relations are derived from the official revision history and the text of the instruments; only high-confidence links held on LawPlayer are listed. Refer to the official gazette for the complete picture.
Contains public sector information licensed under the Open Government Licence v3.0 (legislation.gov.uk).