My bookmarksSign up free

Source

No longer in force

Commission Directive 91/412/EEC of 23 July 1991 laying down the principles and guidelines of good manufacturing practice for veterinary medicinal products

Commission Directive 91/412/EEC of 23 July 1991 laying down the principles and guidelines of good manufacturing practice for veterinary medicinal products

Directive 91/412/EEC · Directive · 16 articles

RepealedRepealed 2026-10-20Status inferred from the source text; the official notice prevails.This legislation has been repealed. Do not cite it as law in force.

Data as of 2026-07-04 · Compiled from an official source version. Later amendments or repeals may not be reflected; the official text prevails. · Read the official text ↗

Article 1

This Directive lays down the principles and guidelines of good manufacturing practice for veterinary medicinal products whose manufacture requires the authorization referred to in Article 24 of Directive 81/851/EEC.

Article 2

For the purposes of this Directive, the definition of medicinal products set out in Article 1 (2) of Council Directive 65/65/EEC (6), and the definition of veterinary medicinal products set out in Article 1 (2) of Directive 81/851/EEC, shall apply. In addition, - "manufacturer" shall mean any holder of the authorization referred to in Article 24 of Directive 81/851/EEC, - "qualified person" shall mean the person referred to in Article 29 of Directive 81/851/EEC, (1) OJ No L 317, 6.11.1981, p. 1. (2) OJ No L 373, 31.12.1990, p. 15. (3) OJ No L 373, 31.12.1990, p. 26. (4) OJ No L 317, 6.11.1981, p. 16. (5) OJ No L 15, 17.1.1987, p. 34. (6) OJ No 22, 9.2.1965, p. 369/65. - "pharmaceutical quality assurance" shall mean the sum total of the organized arrangements made with the object of ensuring that veterinary medicinal products are of the quality required for their intended use, - "good manufacturing practice" shall mean the part of quality assurance with ensures that products are consistently produced and controlled to the quality standards appropriate to their intended use.

Article 3

By means of the repeated inspections referred to in Article 34 of Directive 81/851/EEC, the Member States shall ensure that manufacturers respect the principles and guidelines of good manufacturing practice laid down by this Directive. For the interpretation of these principles and guidelines of good manufacturing practice, the manufacturers and the agents of the competent authorities refer to the detailed guidelines referred to in Article 27a of Directive 81/851/EEC. These detailed guidelines are published by the Commission in the "Guide to good manufacturing practice for medicinal products" and in its annexes (Office for Official Publications of the European Communities, The Rules Governing Medicinal Products in the European Community, Volume IV).

Article 4

The manufacturers shall ensure that the manufacturing operations are carried out in accordance with good manufacturing practice and with the manufacturing authorization. For veterinary medicinal products imported from third countries, the importer shall ensure that the veterinary medicinal products have been manufactured by manufacturers duly authorized and conforming to good manufacturing practice standards, at least equivalent to those laid down by the Community.

Article 5

The manufacturer shall ensure that all manufacturing operations subject to an authorization for marketing are carried out in accordance with the information given in the application for marketing authorization as accepted by the competent authorities. The manufacturers shall regularly review their manufacturing methods in the light of scientific and technical progress. When a modification to the marketing authorization dossier is necessary, the application for modification must be submitted to the competent authorities. CHAPTER II PRINCIPLES AND GUIDELINES OF GOOD MANUFACTURING PRACTICE

Article 6

Quality management The manufacturer shall establish and implement an effective pharmaceutical quality assurance system, involving the active participation of the management and personnel of the different services involved.

Article 7

Personnel 1. At each manufacturing site, the manufacturer shall have competent and appropriately qualified personnel at his disposal in sufficient number to achieve the pharmaceutical quality assurance objectives. 2. The duties of managerial and supervisory staff, including the qualified person(s), responsible for implementing and operating good manufacturing practice shall be defined in job descriptions. Their hierarchical relationships shall be defined in an organizational chart. Organizational charts and job descriptions shall be approved in accordance with the manufacturer's internal procedures. 3. Staff referred to in paragraph 2 shall be given sufficient authority to carry out their responsibilities correctly. 4. Personnel shall receive initial and continuing training including the theory and application of the concept of quality assurance and good manufacturing practice. 5. Hygiene programmes adapted to the activities to be carried out shall be established and observed. These programmes include procedures relating to health, hygiene and clothing of personnel.

Article 8

Premises and equipment 1. Premises and manufacturing equipment shall be located, designed, constructed, adapted and maintained to suit the intended operations. 2. Lay out, design and operation must aim to minimize the risk of errors and permit effective cleaning and maintenance in order to avoid contamination, cross contamination and, in general, any adverse effect on the quality of the product. 3. Premises and equipment intended to be used for manufacturing operations which are critical for the quality of the products shall be subjected to appropriate qualification.

Article 9

Documentation 1. The manufacturer shall have a system of documentation based upon specifications, manufacturing formulae and processing and packaging instructions, procedures and records covering the different manufacturing operations that they perform. Documents shall be clear, free from errors and kept up to-date. Pre-established procedures for general manufacturing operations and conditions shall be available, together with specific documents for the manufacture of each batch. This set of documents shall make it possible to trace the history of the manufacture of each batch. The batch documentation shall be retained for at least one year after the expiry date of the batches to which it relates, or at least five years after the certification referred to in Article 30 (2) of Directive 81/851/EEC, whichever is the longer. 2. When electronic, photographic or other data processing systems are used instead of written documents, the manufacturer shall have validated the system by proving that the data will be appropriately stored during the anticipated period of storage. Data stored by these systems shall be made readily available in legible form. The electronically stored data shall be protected against loss or damage of data (e.g. by duplication or back-up and transfer onto another storage system).

Article 10

Production The different production operations shall be carried out according to pre-established instructions and procedures and in accordance with good manufacturing practice. Adequate and sufficient resources shall be made available for the in-process controls. Appropriate technical and/or organizational measures shall be taken to avoid cross contamination and mix-ups. Any new manufacture or important modification of a manufacturing process shall be validated. Critical phases of manufacturing process shall be regularly revalidated.

Article 11

Quality control 1. The manufacturer shall establish and maintain a quality control department. This department shall be placed under the authority of a person having the required qualifications and shall be independent of the other departments. 2. The quality control department shall have at its disposal one or more quality control laboratories appropriately staffed and equipped to carry out the necessary examination and testing of starting materials, packaging materials and intermediate and finished products testing. Resorting to outside laboratories is authorized in accordance with Article 12 of this Directive and after the authorization referred to in Article 10 (2) of Directive 81/851/EEC has been granted. 3. During the final control of finished products before their release for the sale or distribution, in addition to analytical results, the quality control department shall take into account essential information such as the production conditions, the results of in-process controls, the examination of the manufacturing documents and the conformity of the products to their specifications (including the final finished pack). 4. Samples of each batch of finished products shall be retained for at least one year after the expiry date. Unless in the Member State of manufacture a longer period is required, samples of starting materials (other than solvents, gases and water) used shall be retained for at least two years after the release of the product. This period may be shortened if their stability, as mentioned in the relevant specification, is shorter. All these samples shall be maintained at the disposal of the competent authorities. For certain veterinary medicinal products manufactured individually or in small quantities, or when their storage could raise special problems, other sampling and retaining conditions may be defined in agreement with the competent authority.

Article 12

Work contracted out 1. Any manufacturing operation or operation linked with the manufacture which is carried out under contract, shall be the subject of a written contract between the contract giver and the contract acceptor. 2. The contract shall clearly define the responsibilities of each party and in particular the observance of good manufacturing practice by the contract acceptor and the manner in which the qualified person responsible for releasing each batch shall undertake his full responsibilities 3. The contract acceptor shall not further sub-contract any of the work entrusted to him by the contract giver without the written authorization of the contract giver. 4. The contract acceptor shall respect the principles and guidelines of good manufacturing practice and shall submit to inspections carried out by the competent authorities as provided for by Article 34 of Directive 81/851/EEC.

Article 13

Complaints and product recall The manufacturer shall implement a system for recording and reviewing complaints together with an effective system for recalling promptly and at any time the veterinary medicinal products in the distribution network. Any complaint concerning a quality defect shall be recorded and investigation by the manufacturer. The competent authority shall be informed by the manufacturer of any quality defect that could result in a recall or abnormal restriction on the supply. In so far as possible, the countries of destination shall also be indicated. Any recall shall be made in accordance with the requirements referred to in Article 42 of Directive 81/851/EEC.

Article 14

Self-inspection The manufacturer shall conduct repeated self-inspections as part of the quality assurance system in order to monitor the implementation and respect of good manufacturing practice and to propose any necessary corrective measures. Records of such self-inspections and any further corrective action shall be maintained. CHAPTER III FINAL PROVISIONS

Article 15

Member States shall bring into force the laws, regulations and administrative provisions necessary to comply with this Directive before 23 July 1993. They shall forthwith inform the Commission thereof. When Member States adopt these provisions, these shall contain a reference to this Directive or shall be accompanied by such reference at the time of their official publication. The procedure for such reference shall be adopted by Member States.

Article 16

This Directive is addressed to the Member States. Done at Brussels, 23 July 1991. For the Commission Martin BANGEMANN Vice-President

Other acts of the same type

Directive (EU) 2017/541 of the European Parliament and of the Council of 15 March 2017 on combating terrorism and replacing Council Framework Decision 2002/475/JHA and amending Council Decision 2005/671/JHA Commission Delegated Directive (EU) 2017/1011 of 15 March 2017 amending, for the purposes of adapting to technical progress, Annex III to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for lead in white glasses used for optical applications (Text with EEA relevance. )Commission Delegated Directive (EU) 2017/1009 of 13 March 2017 amending, for the purposes of adapting to technical progress, Annex III to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for cadmium and lead in filter glasses and glasses used for reflectance standards (Text with EEA relevance. )Commission Delegated Directive (EU) 2017/1010 of 13 March 2017 amending, for the purposes of adapting to technical progress, Annex III to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for lead in bearing shells and bushes for certain refrigerant-containing compressors (Text with EEA relevance. )Commission Directive (EU) 2017/433 of 7 March 2017 amending Directive 2009/43/EC of the European Parliament and of the Council as regards the list of defence-related products (Text with EEA relevance. )Commission Directive (EU) 2017/164 of 31 January 2017 establishing a fourth list of indicative occupational exposure limit values pursuant to Council Directive 98/24/EC, and amending Commission Directives 91/322/EEC, 2000/39/EC and 2009/161/EU (Text with EEA relevance. )Council Directive (EU) 2017/159 of 19 December 2016 implementing the Agreement concerning the implementation of the Work in Fishing Convention, 2007 of the International Labour Organisation, concluded on 21 May 2012 between the General Confederation of Agricultural Cooperatives in the European Union (Cogeca), the European Transport Workers' Federation (ETF) and the Association of National Organisations of Fishing Enterprises in the European Union (Europêche) (Text with EEA relevance. )Commission Directive (EU) 2016/2309 of 16 December 2016 adapting for the fourth time the Annexes to Directive 2008/68/EC of the European Parliament and of the Council on the inland transport of dangerous goods to scientific and technical progress (Text with EEA relevance )Directive (EU) 2016/2284 of the European Parliament and of the Council of 14 December 2016 on the reduction of national emissions of certain atmospheric pollutants, amending Directive 2003/35/EC and repealing Directive 2001/81/EC (Text with EEA relevance )Directive (EU) 2016/2341 of the European Parliament and of the Council of 14 December 2016 on the activities and supervision of institutions for occupational retirement provision (IORPs) (recast) (Text with EEA relevance)Directive (EU) 2016/2370 of the European Parliament and of the Council of 14 December 2016 amending Directive 2012/34/EU as regards the opening of the market for domestic passenger transport services by rail and the governance of the railway infrastructure (Text with EEA relevance )Council Directive (EU) 2016/2258 of 6 December 2016 amending Directive 2011/16/EU as regards access to anti-money-laundering information by tax authorities

Source: EUR-Lex (Publications Office of the EU), © European Union, reuse permitted under Commission Decision 2011/833/EU.

What to look at next

Browse all EU Legal ActsEvery instrument by type and year, full text free to read section by sectionEuropean Union legislation EU Legal Acts by type and yearGrouped by instrument type and year of enactment, so you can find others of the same kindBrowse by type and year European Union: what this database coversWhich datasets are here, which official source they come from, and how current they areEuropean Union overview