My bookmarksSign up free
Source

Commission Directive 95/6/EC of 20 March 1995 amending Annexes I and II to Council Directive 66/402/EEC on the marketing of cereal seed

Commission Directive 95/6/EC of 20 March 1995 amending Annexes I and II to Council Directive 66/402/EEC on the marketing of cereal seed

Directive 95/6/EC · Directive · 5 articles

Data as of 2026-07-04 · Compiled from an official source version. Later amendments or repeals may not be reflected; the official text prevails. · Read the official text ↗

Article 1

Open ↗

Annexes I and II to Directive 66/402/EEC are amended as set out in the Annex hereto.

Article 2

Open ↗

1. Member States shall bring into force the laws, regulations or administrative provisions necessary to comply with this Directive not later than 30 June 1995. They shall immediately inform the Commission thereof. When Member States adopt these provisions, these shall contain a reference to this Directive or shall be accompanied by such reference at the time of their official publication. The procedure for such reference shall be adopted by Member States. 2. Member States shall communicate to the Commission the text of the main provisions of national law they adopt in the field covered by this Directive.

Article 3

Open ↗

This Directive shall enter into force on the twentieth day following its publication in the Official Journal of the European Communities.

Article 4

Open ↗

This Directive is addressed to the Member States. Done at Brussels, 20 March 1995. For the Commission Franz FISCHLER Member of the Commission (1) OJ No 125, 11. 7. 1966, p. 2309/66. (2) OJ No L 54, 5. 3. 1993, p. 20. (3) OJ No L 166, 16. 6. 1989, p. 66. (4) OJ No L 325, 11. 11. 1992, p. 25.

Supplementary provisions

ANNEXSupplementary provisions

Open ↗

1. Annex I is amended as follows: (a) In points 2 and 3, the words 'other than hybrids` are added after the words Secale cereale. (b) The following point 3a is inserted: '3a. Hybrids of rye. (a) The crop shall conform to the following standards as regards distances from neighbouring sources of pollen which may result in undesirable foreign pollination. >TABLE> (b) The crop shall have sufficient identity and purity as regards the characteristics of the components, including male sterility. In particular, the crop shall conform to the following standards or other conditions: (i) the number of plants or the crop species, which are recognizable as obviously not being true to the component shall not exceed, - one per 30 m² for the production of basic seed, - one per 10 m² for the production of certified seed, this standard to apply in official field inspections to the female component only, (ii) in the case of basic seed, where male sterility is used, the level of sterility of the male-sterile component shall be at least 98 %. (c) Where appropriate, certified seed shall be produced in mixed cultivation of a female male-sterile component with a male component which restores male fertility.` 2. Annex II is amended as follows: (a) In point 1, the words 'hybrid varieties of Sorghum spp. and Zea Mays` are replaced by the words 'hybrid varieties of Secale Cereale, Sorghum spp. and Zea Mays`. (b) The following is added to point 1: 'C. Hybrids of rye Seed shall not be certified as certified seed unless due account has been taken of the results of an official post-control test, on samples of basic seed taken officially and carried out during the growing season of the seed entered for certification as certified seed to ascertain whether the basic seed met the requirements for basic seed laid down in this Decision in respect of identity and purity as regards the characters of the components, including male sterility.` (c) Point 3 is replaced by the following: '3. Harmful organisms which reduce the usefulness of the seed shall be at the lowest possible level. In particular, the seed shall conform to the following standards in respect of Claviceps purpurea (maximum number of sclerotia or fragments of sclerotia in a sample of the weight specified in column 3 of Annex III). >TABLE>

Other acts of the same type
Commission Delegated Directive 2014/12/EU of 18 October 2013 amending, for the purposes of adapting to technical progress, the Annex IV to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for lead in solders on printed circuit boards of detectors and data acquisition units for Positron Emission Tomographs which are integrated into Magnetic Resonance Imaging equipment Text with EEA relevanceCommission Delegated Directive 2014/13/EU of 18 October 2013 amending, for the purposes of adapting to technical progress, the Annex IV to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for lead in solders on populated printed circuit boards used in Directive 93/42/EEC class IIa and IIb mobile medical devices other than portable emergency defibrillators Text with EEA relevanceCommission Delegated Directive 2014/14/EU of 18 October 2013 amending, for the purposes of adapting to technical progress, the Annex III to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for 3,5 mg mercury per lamp in single capped compact fluorescent lamps for general lighting purposes < 30 W with a lifetime equal to or above 20000  h Text with EEA relevanceCommission Delegated Directive 2014/15/EU of 18 October 2013 amending, for the purposes of adapting to technical progress, the Annex IV to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for lead, cadmium and hexavalent chromium in reused spare parts, recovered from medical devices placed on the market before 22 July 2014 and used in category 8 equipment placed on the market before 22 July 2021 , provided that reuse takes place in auditable closed-loop business-to-business return systems, and that the reuse of parts is notified to the consumer Text with EEA relevanceCommission Delegated Directive 2014/16/EU of 18 October 2013 amending, for the purposes of adapting to technical progress, the Annex IV to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for lead as an activator in the fluorescent powder of discharge lamps when used for extracorporeal photopheresis lamps containing BSP (BaSi 2 O 5 :Pb) phosphors Text with EEA relevanceCommission Directive 2013/47/EU of 2 October 2013 amending Directive 2006/126/EC of the European Parliament and of the Council on driving licences Text with EEA relevanceDirective 2013/38/EU of the European Parliament and of the Council of 12 August 2013 amending Directive 2009/16/EC on port State control Text with EEA relevanceDirective 2013/39/EU of the European Parliament and of the Council of 12 August 2013 amending Directives 2000/60/EC and 2008/105/EC as regards priority substances in the field of water policy Text with EEA relevanceDirective 2013/40/EU of the European Parliament and of the Council of 12 August 2013 on attacks against information systems and replacing Council Framework Decision 2005/222/JHACommission Implementing Directive 2013/45/EU of 7 August 2013 amending Council Directives 2002/55/EC and 2008/72/EC and Commission Directive 2009/145/EC as regards the botanical name of tomato Text with EEA relevanceDirective 2013/32/EU of the European Parliament and of the Council of 26 June 2013 on common procedures for granting and withdrawing international protection (recast)Directive 2013/33/EU of the European Parliament and of the Council of 26 June 2013 laying down standards for the reception of applicants for international protection (recast)

Source: EUR-Lex (Publications Office of the EU), © European Union, reuse permitted under Commission Decision 2011/833/EU.

Contents

What to look at next