ANNEX
REFERENCE DOCUMENT
1. Purpose of the Reference document
The purpose of the Reference document is to facilitate the procedure for authorising the placing in service of vehicles by:
(a)
listing all the parameters to be checked in connection with the authorisation for placing vehicles in service;
(b)
identifying all the rules applied by the Member States for the authorisation of placing vehicles in service;
(c)
referencing each rule to one of the parameters to be checked in connection with the authorisation for placing vehicles in service;
(d)
classifying all rules under group A, B or C in accordance with Section 2 of Annex VII to Directive 2008/57/EC;
(e)
in accordance with Article 1 of Decision 2009/965/EC, outlining the national legal frameworks covering the authorisation for placing vehicles in service.
2. Structure and content
The Reference document shall be structured as follows:
Part 1
:
Application guide: this part shall refer to the elements included in this Decision, and any other information relevant for the management, understanding and use of the reference document.
Part 2
:
National reference documents: the reference document shall include all national reference documents listing and classifying the national rules, one for each Member State, as referred to in Article 3.
Part 3
:
Information on national legal frameworks: in accordance with Article 1 of Decision 2009/965/EC, the reference document shall include information on the national legal framework applicable to the authorisation of placing in service of vehicles. This part shall be filled in as soon as Member States notify the national measures implementing Directive 2008/57/EC.
3. Scope of application of the reference document
The reference document concerns all authorisations for placing railway vehicles in service which are subject to Directive 2008/57/EC and where conformity with national rules is required.
In accordance with Article 1 of Directive 2008/57/EC, vehicles intended to run on TEN and off-TEN are concerned.
Regarding TSI conform vehicles, the reference document shall allow comparison and cross-reference, in respect of a particular parameter, between the rules applied in different Member States in order to verify the technical compatibility with the infrastructure, the compliance with the specific cases, the closure of open points, and the compliance with national rules in the derogation cases.
Furthermore, the reference document shall allow comparison and cross-reference of the national rules related to the list of parameters to be checked in conjunction with the placing in service of non-TSI conform vehicles.