Source

Commission Directive 2011/37/EU of 30 March 2011 amending Annex II to Directive 2000/53/EC of the European Parliament and of the Council on end-of-life vehicles Text with EEA relevance

Directive 2011/37/EU · Directive · 5 articles

Data as of 2026-07-04 · Compiled from an official source version. Later amendments or repeals may not be reflected; the official text prevails. · Read the official text ↗

Article 1

Open ↗

Annex II to Directive 2000/53/EC is replaced by the text set out in the Annex to this Directive.

Article 2

Open ↗

Member States shall bring into force the laws, regulations and administrative provisions necessary to comply with this Directive by 31 December 2011 at the latest.

Article 3

Open ↗

This Directive shall enter into force on the 20th day following its publication in the Official Journal of the European Union .

Article 4

Open ↗

This Directive is addressed to the Member States.

Supplementary provisions

ANNEXSupplementary provisions

Open ↗

ANNEX ‘ANNEX II Materials and components exempt from Article 4(2)(a) Materials and components Scope and expiry date of the exemption To be labelled or made identifiable in accordance with Article 4(2)(b)(iv) Lead as an alloying element 1(a). Steel for machining purposes and batch hot dip galvanised steel components containing up to 0,35 % lead by weight 1(b). Continuously galvanised steel sheet containing up to 0,35 % lead by weight Vehicles type approved before 1 January 2016 and spare parts for these vehicles 2(a). Aluminium for machining purposes with a lead content up to 2 % by weight As spare parts for vehicles put on the market before 1 July 2005 2(b). Aluminium with a lead content up to 1,5 % by weight As spare parts for vehicles put on the market before 1 July 2008 2(c). Aluminium with a lead content up to 0,4 % by weight ( 2 ) 3. Copper alloy containing up to 4 % lead by weight ( 2 ) 4(a). Bearing shells and bushes As spare parts for vehicles put on the market before 1 July 2008 4(b). Bearing shells and bushes in engines, transmissions and air conditioning compressors 1 July 2011 and spare parts for vehicles put on the market before 1 July 2011 Lead and lead compounds in components 5. Batteries ( 2 ) X 6. Vibration dampers Vehicles type approved before 1 January 2016 and spare parts for these vehicles X 7(a). Vulcanising agents and stabilisers for elastomers in brake hoses, fuel hoses, air ventilation hoses, elastomer/metal parts in the chassis applications, and engine mountings As spare parts for vehicles put on the market before 1 July 2005 7(b). Vulcanising agents and stabilisers for elastomers in brake hoses, fuel hoses, air ventilation hoses, elastomer/metal parts in the chassis applications, and engine mountings containing up to 0,5 % lead by weight As spare parts for vehicles put on the market before 1 July 2006 7(c). Bonding agents for elastomers in powertrain applications containing up to 0,5 % lead by weight As spare parts for vehicles put on the market before 1 July 2009 8(a). Lead in solders to attach electrical and electronic components to electronic circuit boards and lead in finishes on terminations of components other than electrolyte aluminium capacitors, on component pins and on electronic circuit boards Vehicles type approved before 1 January 2016 and spare parts for these vehicles X ( 1 ) 8(b). Lead in solders in electrical applications other than soldering on electronic circuit boards or on glass Vehicles type approved before 1 January 2011 and spare parts for these vehicles X ( 1 ) 8(c). Lead in finishes on terminals of electrolyte aluminium capacitors Vehicles type approved before 1 January 2013 and spare parts for these vehicles X ( 1 ) 8(d). Lead used in soldering on glass in mass airflow sensors Vehicles type approved before 1 January 2015 and spare parts of such vehicles X ( 1 ) 8(e). Lead in high melting temperature type solders (i.e. lead-based alloys containing 85 % by weight or more lead) ( 3 ) X ( 1 ) 8(f). Lead in compliant pin connector systems ( 3 ) X ( 1 ) 8(g). Lead in solders to complete a viable electrical connection between semiconductor die and carrier within integrated circuit flip chip packages ( 3 ) X ( 1 ) 8(h). Lead in solder to attach heat spreaders to the heat sink in power semiconductor assemblies with a chip size of at least 1 cm 2 of projection area and a nominal current density of at least 1 A/mm 2 of silicon chip area ( 3 ) X ( 1 ) 8(i). Lead in solders in electrical glazing applications on glass except for soldering in laminated glazing Vehicles type approved before 1 January 2013 and spare parts for these vehicles ( 4 ) X ( 1 ) 8(j). Lead in solders for soldering in laminated glazing ( 3 ) X ( 1 ) 9. Valve seats As spare parts for engine types developed before 1 July 2003 10(a). Electrical and electronic components which contain lead in a glass or ceramic, in a glass or ceramic matrix compound, in a glass-ceramic material, or in a glass-ceramic matrix compound. This exemption does not cover the use of lead in: — glass in bulbs and glaze of spark plugs, — dielectric ceramic materials of components listed under 10(b), 10(c) and 10(d). X ( 5 ) (for components other than piezo in engines) 10(b). Lead in PZT based dielectric ceramic materials of capacitors being part of integrated circuits or discrete semiconductors 10(c). Lead in dielectric ceramic materials of capacitors with a rated voltage of less than 125 V AC or 250 V DC Vehicles type approved before 1 January 2016 and spare parts for these vehicles 10(d). Lead in the dielectric ceramic materials of capacitors compensating the temperature-related deviations of sensors in ultrasonic sonar systems ( 3 ) 11. Pyrotechnic initiators Vehicles type approved before 1 July 2006 and spare parts for these vehicles 12. Lead-containing thermoelectric materials in automotive electrical applications to reduce CO 2 emissions by recuperation of exhaust heat Vehicles type approved before 1 January 2019 and spare parts for these vehicles X Hexavalent chromium 13(a). Corrosion preventive coatings As spare parts for vehicles put on the market before 1 July 2007 13(b). Corrosion preventive coatings related to bolt and nut assemblies for chassis applications As spare parts for vehicles put on the market before 1 July 2008 14. As an anti-corrosion agent of the carbon steel cooling system in absorption refrigerators in motorcaravans up to 0,75 weight -% in the cooling solution except where the use of other cooling technologies is practicable (i.e. available on the market for the application in motor caravans) and does not lead to negative environmental, health and/or consumer safety impacts X Mercury 15(a). Discharge lamps for headlight application Vehicles type approved before 1 July 2012 and spare parts for these vehicles X 15(b). Fluorescent tubes used in instrument panel displays Vehicles type approved before 1 July 2012 and spare parts for these vehicles X Cadmium 16. Batteries for electrical vehicles As spare parts for vehicles put on the market before 31 December 2008 Notes: — A maximum concentration value up to 0,1 % by weight and in homogeneous material, for lead, hexavalent chromium and mercury and up to 0,01 % by weight in homogeneous material for cadmium shall be tolerated, — The re-use of parts of vehicles which were already on the market at the date of expiry of an exemption shall be allowed without limitation since it is not covered by Article 4(2)(a), — Spare parts put on the market after 1 July 2003 which are used for vehicles put on the market before 1 July 2003 shall be exempted from the provisions of Article 4(2)(a) ( *1 ) . ( *1 ) This clause shall not apply to wheel balance weights, carbon brushes for electric motors and brake linings.’ ’ ( 1 ) Dismantling if, in correlation with entry 10(a), an average threshold of 60 grams per vehicle is exceeded. For the application of this clause electronic devices not installed by the manufacturer on the production line shall not be taken into account. ( 2 ) This exemption shall be reviewed in 2015. ( 3 ) This exemption shall be reviewed in 2014. ( 4 ) This exemption shall be reviewed before 1 January 2012. ( 5 ) Dismantling if, in correlation with entries 8(a) to 8(j), an average threshold of 60 grams per vehicle is exceeded. For the application of this clause electronic devices not installed by the manufacturer on the production line shall not be taken into account.

Other acts of the same type

Directive 2005/36/EC of the European Parliament and of the Council of 7 September 2005 on the recognition of professional qualifications (Text with EEA relevance)Directive 2005/44/EC of the European Parliament and of the Council of 7 September 2005 on harmonised river information services (RIS) on inland waterways in the Community Commission Directive 2005/50/EC of 11 August 2005 on the reclassification of hip, knee and shoulder joint replacements in the framework of Council Directive 93/42/EEC concerning medical devices (Text with EEA relevance)Council Directive 2005/47/EC of 18 July 2005 on the Agreement between the Community of European Railways (CER) and the European Transport Workers’ Federation (ETF) on certain aspects of the working conditions of mobile workers engaged in interoperable cross-border services in the railway sector Commission Directive 2005/43/EC of 23 June 2005 amending the Annexes to Council Directive 68/193/EEC on the marketing of material for the vegetative propagation of the vine Directive 2005/29/EC of the European Parliament and of the Council of 11 May 2005 concerning unfair business-to-consumer commercial practices in the internal market and amending Council Directive 84/450/EEC, Directives 97/7/EC, 98/27/EC and 2002/65/EC of the European Parliament and of the Council and Regulation (EC) No 2006/2004 of the European Parliament and of the Council (‘Unfair Commercial Practices Directive’) (Text with EEA relevance)Commission Directive 2005/31/EC of 29 April 2005 amending Council Directive 84/500/EEC as regards a declaration of compliance and performance criteria of the analytical method for ceramic articles intended to come into contact with foodstuffs (Text with EEA relevance)Commission Directive 2005/28/EC of 8 April 2005 laying down principles and detailed guidelines for good clinical practice as regards investigational medicinal products for human use, as well as the requirements for authorisation of the manufacturing or importation of such products (Text with EEA relevance)Directive 2005/1/EC of the European Parliament and of the Council of 9 March 2005 amending Council Directives 73/239/EEC, 85/611/EEC, 91/675/EEC, 92/49/EEC and 93/6/EEC and Directives 94/19/EC, 98/78/EC, 2000/12/EC, 2001/34/EC, 2002/83/EC and 2002/87/EC in order to establish a new organisational structure for financial services committees (Text with EEA relevance)Directive 2005/20/EC of the European Parliament and of the Council of 9 March 2005 amending Directive 94/62/EC on packaging and packaging waste Commission Directive 2005/8/EC of 27 January 2005 amending Annex I to Directive 2002/32/EC of the European Parliament and of the Council on undesirable substances in animal feedText with EEA relevance Council Directive 2004/117/EC of 22 December 2004 amending Directives 66/401/EEC, 66/402/EEC, 2002/54/EC, 2002/55/EC and 2002/57/EC as regards examinations carried out under official supervision and equivalence of seed produced in third countries

Source: EUR-Lex (Publications Office of the EU), © European Union, reuse permitted under Commission Decision 2011/833/EU.

What to look at next

Browse all EU Legal ActsEvery instrument by type and year, full text free to read section by sectionEuropean Union legislation EU Legal Acts by type and yearGrouped by instrument type and year of enactment, so you can find others of the same kindBrowse by type and year European Union: what this database coversWhich datasets are here, which official source they come from, and how current they areEuropean Union overview