My bookmarksSign up free

Regulation (EU) No 1025/2012 CHAPTER VII — FINAL PROVISIONS

Article 26–Article 30 · 5 articles

Compiled from an official source version. Later amendments or repeals may not be reflected; the official text prevails. · Read the official text ↗

Amendments

Article 26

1.   The following provisions are deleted: (a) Article 6(1) of Directive 89/686/EEC; (b) Article 5 of Directive 93/15/EEC; (c) Article 6(1) of Directive 94/9/EC; (d) Article 6(1) of Directive 94/25/EC; (e) Article 6(1) of Directive 95/16/EC; (f) Article 6 of Directive 97/23/EC; (g) Article 14 of Directive 2004/22/EC; (h) Article 8(4) of Directive 2007/23/EC; (i) Article 7 of Directive 2009/23/EC; (j) Article 6 of Directive 2009/105/EC. References to those deleted provisions shall be construed as references to Article 11 of this Regulation. 2.   Directive 98/34/EC is hereby amended as follows: (a) in Article 1, paragraphs 6 to 10 are deleted; (b) Articles 2, 3 and 4 are deleted; (c) in Article 6(1), the words ‘with the representatives of the standards institutions referred to in Annexes I and II’ are deleted; (d) in Article 6(3), the first indent is deleted; (e) in Article 6(4), points (a), (b) and (e) are deleted; (f) Article 7 is replaced by the following: ‘Article 7 Member States shall communicate to the Commission, in accordance with Article 8(1), all requests made to standards institutions to draw up technical specifications or a standard for specific products for the purpose of enacting a technical regulation for such products as draft technical regulations, and shall state the grounds for their enactment.’; (g) in Article 11, the second sentence is replaced by the following sentence: ‘The Commission shall publish annual statistics on the notifications received in the Official Journal of the European Union .’; (h) Annexes I and II are deleted. References to those deleted provisions shall be construed as references to this Regulation and shall be read in accordance with the correlation table set out in Annex IV to this Regulation.

National standardisation bodies

Article 27

Member States shall inform the Commission of their standardisation bodies. The Commission shall publish a list of national standardisation bodies and any updates to that list in the Official Journal of the European Union .

Transitional provisions

Article 28

In Union acts that provide for a presumption of conformity with essential requirements through the application of harmonised standards adopted in accordance with Directive 98/34/EC, references to Directive 98/34/EC shall be construed as references to this Regulation, except references to the committee set up by Article 5 of Directive 98/34/EC regarding technical regulations. Where a Union act provides for a procedure for objection to harmonised standards, Article 11 of this Regulation shall not apply to that act.

Repeal

Article 29

Decision No 1673/2006/EC and Decision 87/95/EEC are hereby repealed. References to the repealed Decisions shall be construed as references to this Regulation and shall be read in accordance with the correlation table set out in Annex IV to this Regulation.

Entry into force

Article 30

This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union . It shall apply from 1 January 2013.

Back to Regulation (EU) No 1025/2012 — full text

Articles on this page are reproduced verbatim from official open data. See the attribution line.

Source: EUR-Lex (Publications Office of the EU), © European Union, reuse permitted under Commission Decision 2011/833/EU.

What to look at next