Commission Regulation (EU) No 143/2013 of 19 February 2013 amending Directive 2007/46/EC of the European Parliament and of the Council and Commission Regulation (EC) No 692/2008 as regards the determination of CO 2 emissions from vehicles submitted to multi-stage type-approval Text with EEA relevance

Regulation (EU) No 143/2013 · Regulation · 7 articles

Data as of 2026-07-04 · Compiled from an official source version. Later amendments or repeals may not be reflected; the official text prevails. · Read the official text ↗

Article 1

Annexes I and IX to Directive 2007/46/EC are amended in accordance with Annex I to this Regulation.

Article 2

Annexes I and XII to Regulation (EC) No 692/2008 are amended in accordance with Annex II to this Regulation.

Article 3

The Commission shall assess the need to review the procedure set out in points 5.1 to 5.7 of Annex XII to Regulation (EC) No 692/2008 as amended by this Regulation. On the basis of that assessment and no later than 31 December 2016, the Commission shall submit a report to the European Parliament and the Council accompanied, if appropriate, by any appropriate proposals.

Article 4

1. For a transitional period until 1 January 2014, certificates of conformity of base vehicles of category N 1 within the scope of Regulation (EC) No 715/2007 issued in accordance with Directive 2007/46/EC and Regulation (EC) No 692/2008 before the amendments introduced by this Regulation, shall continue to be valid. 2. For a transitional period until 1 January 2014, certificates of conformity of completed vehicles of category N 1 within scope of Regulation (EC) No 715/2007 issued in accordance with Directive 2007/46/EC and Regulation (EC) No 692/2008 before the amendments introduced by this Regulation, shall continue to be valid. 3. With effect from 1 January 2013, national authorities shall consider certificates of conformity complying with the requirements set out in this Regulation to be valid.

Article 5

This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union . It shall apply from 1 January 2014, with the exception of Article 4(3) which shall apply from 1 January 2013.

Supplementary provisions

ANNEX ISupplementary provisions

ANNEX I Annexes I and IX to Directive 2007/46/EC are amended as follows: (1) in Annex I, the following points 2.17, 2.17.1 and 2.17.2 are added: 2.17. Vehicle submitted to multi-stage type-approval (only in the case of incomplete or completed vehicles of category N 1 within the scope of Regulation (EC) No 715/2007: yes/no ( 1 ) 2.17.1. Mass of the base vehicle in running order: …kg. 2.17.2. Default added mass, calculated in accordance with Section 5 of Annex XII to Regulation (EC) No 692/2008: …kg.’ (2) Annex IX is amended as follows: (a) Part I, Complete and completed vehicles, is amended as follows: (i) in Model B – Side 1, Completed vehicles, EC certificate of conformity, the following point 0.2.2 is inserted: ‘0.2.2. Type-approval information of the base vehicle ( q ): Type: … Variant ( a ): … Version ( a ): … Type-approval number, including extension number …’ (ii) in Model B – Side 1, Completed vehicles, EC certificate of conformity, the following point 0.5.1 is inserted: ‘0.5.1. Name and address of the manufacturer of the base vehicle ( q ) …’ (iii) in Side 2 – Vehicle category N 1 (complete and completed vehicles), the following point 14 is inserted: ‘14. Mass of the base vehicle in running order: …kg ( 1 )( q )’ (b) in the ‘Explanatory notes relating to Annex IX’, the following explanatory note ( q ) is added: ‘( q ) In the case of completed vehicles of category N 1 within the scope of Regulation (EC) No 715/2007.’

ANNEX IISupplementary provisions

ANNEX II Annexes I and XII to Regulation (EC) No 692/2008 are amended as follows: (1) in Appendix 3 of Annex I, the following points 2.17, 2.17.1 and 2.17.2 are inserted: 2.17. Vehicle submitted to multi-stage type-approval (only in the case of incomplete or completed vehicles of category N 1 within the scope of Regulation (EC) No 715/2007): yes/no ( 1 ) 2.17.1. Mass of the base vehicle in running order: … kg 2.17.2. Default added mass, calculated in accordance with Section 5 of Annex XII to Regulation (EC) No 692/2008: … kg’ (2) in Annex XII, the following Section 5 is added: ‘5. DETERMINATION OF CO 2 EMISSIONS AND FUEL CONSUMPTION FROM N 1 VEHICLES SUBMITTED TO MULTI-STAGE TYPE-APPROVAL 5.1. For the purpose of determining the CO 2 emissions and fuel consumption of a vehicle submitted to multi-stage type-approval, as defined in Article 3(7) of Directive 2007/46/EC, the base vehicle, as defined in Article 3(18) of that Directive, shall be tested in accordance with points 2 and 3 of this Annex. 5.2. The reference mass to be used for the testing shall be the one resulting from the following formula: In this formula: RM = reference mass to be used for the testing in kg RM Base_Vehicle = reference mass of the base vehicle, as defined in Article 3(3) of Regulation (EC) No 715/2007, in kg DAM = default added mass, calculated in accordance with the formula set out in point 5.3, corresponding to the estimated weight of the bodywork fitted to the base vehicle, in kg. 5.3. The default added mass shall be calculated according to the following formula: DAM : In this formula: DAM = default added mass in kg a = multiplying factor, calculated in accordance with the formula set out in point 5.4 TPMLM = technically permissible maximum laden mass, stated by the manufacturer of the base vehicle, in kg RM Base_Vehicle = reference mass of the base vehicle, as defined in Article 3(3) of Regulation (EC) No 715/2007, in kg. 5.4. The multiplying factor shall be calculated according to the following formula: In this formula: a = multiplying factor RM Base_Vehicle = reference mass of the base vehicle, as defined in Article 3(3) of Regulation (EC) No 715/2007, in kg. 5.5. The manufacturer of the base vehicle is responsible for the correct application of the requirements laid down in points 5.1 to 5.4. 5.6. The manufacturer of the completed vehicle shall include, in the certificate of conformity, the information concerning the base vehicle, in accordance with Annex IX to Directive 2007/46/EC. 5.7. In the case of vehicles submitted to individual vehicle approval, the individual approval certificate shall include the following information: (a) the CO 2 emissions measured according to the methodology set out in points 5.1 to 5.4; (b) the mass of the completed vehicle in running order; (c) the identification code corresponding to the type, variant and version of the base vehicle; (d) the type-approval number of the base vehicle, including the extension number; (e) the name and address of the manufacturer of the base vehicle; (f) the mass of the base vehicle in running order. 5.8. The procedure set out in points 5.1 to 5.7 shall apply to base vehicles of category N 1 , as defined in point 1.2.1 of Part A of Annex II to Directive 2007/46/EC, included in the scope of Regulation (EC) No 715/2007.’.

Other acts of the same type

Source: EUR-Lex (Publications Office of the EU), © European Union, reuse permitted under Commission Decision 2011/833/EU.

What to look at next

Browse all EU Legal ActsEvery instrument by type and year, full text free to read section by sectionEuropean Union legislation EU Legal Acts by type and yearGrouped by instrument type and year of enactment, so you can find others of the same kindBrowse by type and year European Union: what this database coversWhich datasets are here, which official source they come from, and how current they areEuropean Union overview