My bookmarksSign up free

Commission Implementing Regulation (EU) No 877/2014 of 8 August 2014 concerning the classification of certain goods in the Combined Nomenclature

Commission Implementing Regulation (EU) No 877/2014 of 8 August 2014 concerning the classification of certain goods in the Combined Nomenclature

Implementing Regulation (EU) No 877/2014 · Regulation · 4 articles

Data as of 2026-07-04 · Compiled from an official source version. Later amendments or repeals may not be reflected; the official text prevails. · Read the official text ↗

Article 1

The goods described in column (1) of the table set out in the Annex shall be classified within the Combined Nomenclature under the CN code indicated in column (2) of that table.

Article 2

Binding tariff information which does not conform to this Regulation may continue to be invoked in accordance with Article 12(6) of Regulation (EEC) No 2913/92 for a period of three months from the date of entry into force of this Regulation.

Article 3

This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union .

Supplementary provisions

ANNEXSupplementary provisions

ANNEX Description of the goods Classification (CN-code) Reasons (1) (2) (3) An apparatus (so-called ‘LCD video wall display’) comprising a colour monitor of the LCD technology and an automatic data-processing (ADP) machine, with dimensions of approximately 91 × 53 × 12 cm. The monitor with a diagonal measurement of the screen of approximately 102 cm (40 inches) has the following characteristics: — a native resolution of 1 920 × 1 080 pixels, — an aspect ratio of 16:9, — a pixel pitch of 0,46125 mm, — a response time of 8 ms, — a maximum brightness of 700 cd/m 2 , — a typical contrast ratio of 3 000 :1, — a horizontal and vertical viewing angle of 178°, — picture-in-picture (PIP) capability. The built-in ADP machine comprises a microprocessor, a memory of 1 GB and a hard disk drive of 40 GB. The apparatus also comprises an audio amplifier, two loudspeakers and power and control buttons and is presented with a remote control. The apparatus has the following interfaces: VGA In, DVI-D In/Out, HDMI, CVBS (AV), RS232C In/Out, Audio In/Out and LAN. The apparatus is presented for use as a component in LCD video walls. The integrated ADP machine is used as a video wall processor for providing video wall control over a network of up to 5 × 5 video wall configurations. The apparatus can work autonomously as a monitor or as an ADP machine. 8528 59 31 Classification is determined by general rules 1 and 6 for the interpretation of the Combined Nomenclature, note 3 to Section XVI and by the wording of CN codes 8528 , 8528 59 and 8528 59 31 . The apparatus is designed to perform two functions of Section XVI (data-processing of heading 8471 and video display of heading 8528 ). By virtue of note 3 to that section, it is to be classified as being that apparatus which performs the principal function. Given its concept and design, such as the fact that the ADP machine is used as a video wall processor for providing video wall control over a network of up to 5 × 5 video wall configurations, the apparatus is intended to be used as a monitor component of a LCD video wall. Consequently the apparatus' principal function is that of a monitor of heading 8528 . Classification under heading 8471 as an ADP machine is therefore excluded. Given its objective characteristics, such as the size of the screen, the supported video modes, a pixel pitch not suitable for prolonged close viewing, the high brightness, the presence of a remote control, the audio circuits with amplification and the PIP function, the monitor is not considered to be of a kind solely or principally used in an ADP system of heading 8471 . Classification under subheading 8528 51 00 is therefore excluded. As the monitor is capable of displaying signals from an ADP machine at a level sufficient for practical use with the ADP machine, it is considered to be capable of displaying signals from automatic data-processing machines with an acceptable level of functionality. The apparatus is therefore to be classified under CN code 8528 59 31 as other flat panel displays able to display signals from automatic data-processing machines with an acceptable level of functionality with a screen of the liquid crystal display (LCD) technology.

Other acts of the same type
Commission Regulation (EU) 2024/1821 of 25 June 2024 amending Annex II to Regulation (EC) No 1925/2006 of the European Parliament and of the Council and Annex II to Directive 2002/46/EC of the European Parliament and of the Council as regards iron milk caseinate added to foods and used in the manufacture of food supplementsCouncil Regulation (EU) 2024/1829 of 25 June 2024 amending Regulation (EU) 2021/2283 opening and providing for the management of autonomous tariff quotas of the Union for certain agricultural and industrial productsCouncil Regulation (EU) 2024/1851 of 25 June 2024 amending Regulation (EU) 2021/2278 suspending the Common Customs Tariff duties referred to in Article 56(2), point (c), of Regulation (EU) No 952/2013 of the European Parliament and of the Council on certain agricultural and industrial productsCouncil Regulation (EU) 2024/1739 of 24 June 2024 amending Regulation (EU) No 269/2014 concerning restrictive measures in respect of actions undermining or threatening the territorial integrity, sovereignty and independence of UkraineCouncil Regulation (EU) 2024/1745 of 24 June 2024 amending Regulation (EU) No 833/2014 concerning restrictive measures in view of Russia’s actions destabilising the situation in UkraineCouncil Implementing Regulation (EU) 2024/1746 of 24 June 2024 implementing Regulation (EU) No 269/2014 concerning restrictive measures in respect of actions undermining or threatening the territorial integrity, sovereignty and independence of UkraineCommission Implementing Regulation (EU) 2024/1749 of 24 June 2024 renewing the approval of the active substance metconazole as a candidate for substitution in accordance with Regulation (EC) No 1107/2009 of the European Parliament and of the Council, and amending Commission Implementing Regulation (EU) No 540/2011Commission Implementing Regulation (EU) 2024/1750 of 24 June 2024 concerning the renewal of the authorisation of a preparation of Levilactobacillus brevis DSM 23231 as a feed additive for all animal species and amending Implementing Regulation (EU) No 399/2014Commission Implementing Regulation (EU) 2024/1752 of 24 June 2024 amending Implementing Regulation (EU) 2021/552 as regards administrative and minor changes to the Union authorisation for the biocidal product family DEC-AHOL® Product FamilyCouncil implementing Regulation (EU) 2024/1776 of 24 June 2024 implementing Regulation (EU) 2024/1428 amending Regulation (EU) No 833/2014 concerning restrictive measures in view of Russia’s actions destabilising the situation in UkraineCouncil Implementing Regulation (EU) 2024/1778 of 24 June 2024 implementing Regulation (EU) 2019/796 concerning restrictive measures against cyberattacks threatening the Union or its Member StatesCommission Implementing Regulation (EU) 2024/1782 of 24 June 2024 amending Implementing Regulation (EU) 2019/159, including the prolongation of the safeguard measure on imports of certain steel products

Source: EUR-Lex (Publications Office of the EU), © European Union, reuse permitted under Commission Decision 2011/833/EU.

What to look at next