My bookmarksSign up free

Commission Implementing Regulation (EU) 2015/1414 of 20 August 2015 amending Implementing Regulation (EU) No 136/2012 concerning the authorisation of sodium bisulphate as feed additive for pets and for non-food producing animals (Text with EEA relevance)

Commission Implementing Regulation (EU) 2015/1414 of 20 August 2015 amending Implementing Regulation (EU) No 136/2012 concerning the authorisation of sodium bisulphate as feed additive for pets and for non-food producing animals (Text with EEA relevance)

Implementing Regulation (EU) 2015/1414 · Regulation · 6 articles

Data as of 2026-07-04 · Compiled from an official source version. Later amendments or repeals may not be reflected; the official text prevails. · Read the official text ↗

Article 1

Annex I to Implementing Regulation (EU) No 136/2012 shall be replaced by the Annex I to this Regulation.

Article 2

Annex II to Implementing Regulation (EU) No 136/2012 shall be replaced by the Annex II to this Regulation.

Article 3

The substance specified in the Annex, and feed containing it, which are produced and labelled before 10 September 2017 in accordance with the rules applicable before 10 September 2015 may continue to be placed on the market and used until the existing stocks are exhausted.

Article 4

This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union .

Supplementary provisions

ANNEX ISupplementary provisions

ANNEX I ‘ANNEX I Identification number of the additive Name of the holder of authorisation Additive Composition, chemical formula, description, analytical method Species or category of animal Maximum age Minimum content Maximum content Other provisions End of period of authorisation mg/kg of complete feedingstuff with a moisture content of 12 % Category of technological additives. Functional group: acidity regulators 1j514ii — Sodium bisulphate Additive composition Sodium bisulphate: ≥ 95,2 % Characterisation of the active substance Sodium bisulphate CAS No 7681-38-1 NaHSO 4 Na 19,15 % SO 4  80,01 % Produced by chemical synthesis Method of Analysis  ( 1 ) Determination of sodium hydrogen sulphate in feed additives: titrimetric method based on the determination of total soluble acidity of sodium bisulphate against a standard sodium hydroxide solution. Pets and other non-food producing animals other than cats and mink — — 4 000 1. In the directions for use of the additive and premixture, indicate the storage temperature, storage life, and stability to pelleting. 2. For safety: breathing protection, eye protection and gloves shall be used during handling. 3. The total content of sodium bisulphate must not exceed the maximum permitted levels in complete feedingstuff established for each relevant species 8 March 2022 Cats 20 000 Mink 10 000 ( 1 )   Details of the analytical methods are available at the following address of the Reference Laboratory: https://ec.europa.eu/jrc/en/eurl/feed-additives/evaluation-reports’

ANNEX IISupplementary provisions

ANNEX II ‘ANNEX II Identification number of the additive Name of the holder of authorisation Additive Composition, chemical formula, description, analytical method Species or category of animal Maximum age Minimum content Maximum content Other provisions End of period of authorisation mg/kg of complete feedingstuff with a moisture content of 12 % Category of sensory additives. Functional group: flavouring compounds 1j514ii — Sodium bisulphate Additive composition Sodium bisulphate: ≥ 95,2 % Characterisation of the active substance Sodium bisulphate CAS No 7681-38-1 NaHSO 4 Na 19,15 % SO 4  80,01 % Produced by chemical synthesis Method of Analysis  ( 1 ) Determination of sodium hydrogen sulphate in feed additives: titrimetric method based on the determination of total soluble acidity of sodium bisulphate against a standard sodium hydroxide solution. Pets and other non-food producing animals other than cats and mink — — 4 000 1. In the directions for use of the additive and premixture, indicate the storage temperature, storage life, and stability to pelleting. 2. For safety: breathing protection, eye protection and gloves shall be used during handling. 3. The total content of sodium bisulphate must not exceed the maximum permitted levels in complete feedingstuff established for each relevant species. 8 March 2022 Cats 20 000 Mink 10 000 ( 1 )   Details of the analytical methods are available at the following address of the Reference Laboratory: https://ec.europa.eu/jrc/en/eurl/feed-additives/evaluation-reports’

Source: EUR-Lex (Publications Office of the EU), © European Union, reuse permitted under Commission Decision 2011/833/EU.

What to look at next