LawPlayer
My bookmarks
Source

Directive (EU) 2016/798 CHAPTER II — DEVELOPMENT AND MANAGEMENT OF RAILWAY SAFETY

Article 4–Article 6 · 3 articles

Compiled from an official source version. Later amendments or repeals may not be reflected; the official text prevails. · Read the official text ↗

Role of actors in the Union rail system in developing and improving railway safety

Article 4

Open ↗

1.   With the aim of developing and improving railway safety, Member States, within the limits of their competences, shall: (a)  ensure that railway safety is generally maintained and, where reasonably practicable, continuously improved, taking into consideration the development of Union law and international rules and of technical and scientific progress, and giving priority to the prevention of accidents; (b)  ensure that all applicable legislation is enforced in an open and non-discriminatory manner, fostering the development of a single European rail transport system; (c)  ensure that measures to develop and improve railway safety take account of the need for a system-based approach; (d)  ensure that the responsibility for the safe operation of the Union rail system and the control of risks associated with it is laid upon the infrastructure managers and railway undertakings, each for its part of the system, obliging them to: (i)  implement necessary risk control measures as referred to in point (a) of Article 6(1), where appropriate in cooperation with each other; (ii)  apply Union and national rules; (iii)  establish safety management systems in accordance with this Directive; (e)  without prejudice to civil liability in accordance with the legal requirements of the Member States, ensure that each infrastructure manager and each railway undertaking is made responsible for its part of the system and its safe operation, including supply of materials and contracting of services vis-à-vis users, customers, the workers concerned and other actors referred to in paragraph 4; (f)  develop and publish annual safety plans setting out the measures envisaged to achieve the CSTs; and (g)  where appropriate, support the Agency in its work to monitor the development of railway safety at Union level. 2.   The Agency shall ensure, within the limits of its competences, that railway safety is generally maintained and, where reasonably practicable, continuously improved, taking into consideration the development of Union law and of technical and scientific progress and giving priority to the prevention of serious accidents. 3.   Railway undertakings and infrastructure managers shall: (a)  implement the necessary risk control measures referred to in point (a) of Article 6(1), where appropriate in cooperation with each other and with other actors; (b)  take account in their safety management systems of the risks associated with the activities of other actors and third parties; (c)  where appropriate, contractually oblige the other actors referred to in paragraph 4 having a potential impact on the safe operation of the Union rail system to implement risk control measures; and (d)  ensure that their contractors implement risk control measures through the application of the CSMs for monitoring processes set out in the CSMs on monitoring referred to in point (c) of Article 6(1), and that this is stipulated in contractual arrangements to be disclosed on request of the Agency or of the national safety authority. 4.   Without prejudice to the responsibilities of railway undertakings and infrastructure managers referred to in paragraph 3, entities in charge of maintenance and all other actors having a potential impact on the safe operation of the Union rail system, including manufacturers, maintenance suppliers, keepers, service providers, contracting entities, carriers, consignors, consignees, loaders, unloaders, fillers and unfillers, shall: (a)  implement the necessary risk control measures, where appropriate in cooperation with other actors; (b)  ensure that subsystems, accessories, equipment and services supplied by them comply with specified requirements and conditions for use so that they can be safely operated by the railway undertaking and/or the infrastructure manager concerned. 5.   Railway undertakings, infrastructure managers and any actor referred to in paragraph 4 who identifies or is informed of a safety risk relating to defects and construction non-conformities or malfunctions of technical equipment, including those of structural subsystems, shall, within the limits of their respective competence: (a)  take any necessary corrective measure to tackle the safety risk identified; (b)  report those risks to the relevant parties involved, in order to enable them to take any necessary further corrective action to ensure continuous achievement of the safety performance of the Union rail system. The Agency may establish a tool that facilitates this exchange of information among the relevant actors, taking into account the privacy of the users involved, the results of a cost-benefit analysis as well as the IT applications and registers already set up by the Agency. 6.   In the case of exchange of vehicles between railway undertakings, any involved actor shall exchange all information relevant to safe operation including, but not limited to, the status and history of the vehicle concerned, elements of the maintenance files for the purpose of traceability, traceability of loading operations and consignment notes.

Common safety indicators (‘CSIs’)

Article 5

Open ↗

1.   In order to facilitate assessment of the achievement of the CSTs and to provide for the monitoring of the general development of railway safety, Member States shall collect information on CSIs through the annual reports of the national safety authorities referred to in Article 19. 2.   The CSIs are set out in Annex I.

Common safety methods (‘CSMs’)

Article 6

Open ↗

1.   The CSMs shall describe how the safety levels, the achievement of safety targets and compliance with other safety requirements are assessed, including, where appropriate, through an independent assessment body, by elaborating and defining: (a)  the risk evaluation and assessment methods; (b)  the methods for assessing conformity with requirements in safety certificates and safety authorisations issued in accordance with Articles 10 and 12; (c)  the methods for supervision to be applied by national safety authorities and the methods for monitoring to be applied by railway undertakings, infrastructure managers and entities in charge of maintenance; (d)  the methods for assessing the safety level and the safety performance of railway operators at national and Union level; (e)  the methods for assessing the achievement of safety targets at national and Union level; and (f)  any other methods covering a process of the safety management system which need to be harmonised at Union level. 2.   The Commission shall, by means of implementing acts, give a mandate to the Agency to draft CSMs and amendments thereto and to make the relevant recommendations to the Commission, on the basis of a clear justification of the need for a new or amended CSM and its impact on existing rules and on the level of safety of the Union rail system. Those implementing acts shall be adopted in accordance with the examination procedure referred to in Article 28(3). Where the committee referred to in Article 28 (‘the committee’) delivers no opinion, the Commission shall not adopt the draft implementing act, and the third subparagraph of Article 5(4) of Regulation (EU) No 182/2011 shall apply. The drafting, adoption and review of CSMs shall take account of the opinions of users, the national safety authorities and stakeholders, including social partners, where appropriate. The recommendations shall enclose a report on the results of that consultation and a report assessing the impact of the new or amended CSM to be adopted. 3.   During the exercise of the mandate referred to in paragraph 2, the committee shall be kept systematically and regularly informed by the Agency or by the Commission of the preparatory work on the CSMs. During that work, the Commission may address to the Agency any useful recommendations concerning the CSMs and a cost-benefit analysis. In particular, the Commission may require that alternative solutions be examined by the Agency and that the assessment of the costs and benefits of those alternative solutions be set out in the report annexed to the draft CSMs. The Commission shall be assisted by the committee for the tasks mentioned in the first subparagraph. 4.   The Commission shall examine the recommendation issued by the Agency with a view to verifying that the mandate referred to in paragraph 2 is fulfilled. Where the mandate is not fulfilled, the Commission shall request the Agency to review its recommendation by indicating the points of the mandate which were not fulfilled. For justified reasons, the Commission may decide to modify the mandate given to the Agency in accordance with the procedure set out in paragraph 2. The Commission shall be assisted by the committee for the tasks mentioned in the first subparagraph. 5.   The CSMs shall be revised at regular intervals, taking into account the experience gained from their application and the global development of railway safety and with the objective of generally maintaining and, where reasonably practicable, continuously improving safety. 6.   On the basis of the recommendation issued by the Agency and after the examination referred to in paragraph 4 of this Article, the Commission shall be empowered to adopt delegated acts in accordance with Article 27 concerning the content of CSMs, and of any amendments thereto. 7.   Member States shall make any necessary amendments to their national rules in the light of the adoption of CSMs and amendments thereto without delay.

Back to Directive (EU) 2016/798 — full text

Articles on this page are reproduced verbatim from official open data. See the attribution line.

Source: EUR-Lex (Publications Office of the EU), © European Union, reuse permitted under Commission Decision 2011/833/EU.

What to look at next