Commission Implementing Regulation (EU) 2018/242 of 15 February 2018 concerning the authorisation of hex-3(cis)-en-1-ol, non-6-en-1-ol, oct-3-en-1-ol, non-6(cis)-enal, hex-3(cis)-enal, hept-4-enal, hex-3(cis)-enyl acetate, hex-3(cis)-enyl formate, hex-3-enyl butyrate, hex-3-enyl hexanoate, hex-3(cis)-enyl isobutyrate, citronellol, (-)-3,7-dimethyl-6-octen-1-ol, citronellal, 2,6-dimethylhept-5-enal, citronellic acid, citronellyl acetate, citronellyl butyrate, citronellyl formate, citronellyl propionate, 1-ethoxy-1-(3-hexenyloxy)ethane and hex-3-enyl isovalerate as feed additives for all animal species (Text with EEA relevance. )
Data as of 2026-07-04 · Compiled from an official source version. Later amendments or repeals may not be reflected; the official text prevails. · Read the official text ↗
Authorisation
The substances specified in the Annex, belonging to the additive category ‘sensory additives’ and to the functional group ‘flavouring compounds’, are authorised as feed additives in animal nutrition subject to the conditions laid down in that Annex.
Transitional measures
1. The substances specified in the Annex and premixtures containing those substances, which are produced and labelled before 15 September 2018 in accordance with the rules applicable before 15 March 2018 may continue to be placed on the market and used until the existing stocks are exhausted. 2. Feed materials and compound feed containing the substances as specified in the Annex which are produced and labelled before 15 March 2019 in accordance with the rules applicable before 15 March 2018 may continue to be placed on the market and used until the existing stocks are exhausted if they are intended for food-producing animals. 3. Feed materials and compound containing the substances as specified in the Annex which are produced and labelled before 15 March 2020 in accordance with the rules applicable before 15 March 2018 may continue to be placed on the market and used until the existing stocks are exhausted if they are intended for non-food-producing animals.
Entry into force
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union .
ANNEX Identification number of the additive Name of the holder of authorisation Additive Composition, chemical formula, description, analytical method Species or category of animal Maximum age Minimum content Maximum content Other provisions End of period of authorisation mg of active substance/kg of complete feedingstuff with a moisture content of 12 % Category: Sensory additives. Functional group: Flavouring compounds 2b02056 — Hex-3(cis)-en-1-ol Additive composition Hex-3(cis)-en-1-ol Characterisation of the active substance Hex-3(cis)-en-1-ol Produced by chemical synthesis Purity: min. 98 % assay as sum of (Z)- and (E)-isomers; min. 92 % of (Z)-isomer Chemical formula: C 6 H 12 O CAS number: 928-96-1 FLAVIS No: 02.056 Method of analysis ( 1 ) For the determination of hex-3(cis)-en-1-ol in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL All animal species — — — 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.’ 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures and on the labelling of feed materials and compound feedingstuffs, if the content of the active substance in complete feedingstuff with a moisture content of 12 % exceeds: 5 mg/kg. 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 15.3.2028 2b02093 — Non-6-en-1-ol Additive composition Non-6-en-1-ol Characterisation of the active substance Non-6-en-1-ol Produced by chemical synthesis Purity: min. 98 % assay Chemical formula: C 9 H 18 O CAS number: 35854-86-5 FLAVIS No: 02.093 Method of analysis ( 1 ) For the determination of non-6-en-1-ol in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL All animal species — — — 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 1 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 1 mg/kg.’ 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures and on the labelling of feed materials and compound feedingstuffs, if the content of the active substance in complete feedingstuff with a moisture content of 12 % exceeds: 1 mg/kg. 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 15.3.2028 2b02094 — Oct-3-en-1-ol Additive composition Oct-3-en-1-ol Characterisation of the active substance Oct-3-en-1-ol Produced by chemical synthesis Purity: min. 96 % assay, as (Z)- isomer. Chemical formula: C 8 H 16 O CAS number: 20125-84-2 FLAVIS No: 02.094 Method of analysis ( 1 ) For the determination oct-3-en-1-ol in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL All animal species — — — 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 1 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 1 mg/kg.’ 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures and on the labelling of feed materials and compound feedingstuffs, if the content of the active substance in complete feedingstuff with a moisture content of 12 % exceeds: 1 mg/kg. 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 15.3.2028 2b05059 — Non-6(cis)-enal Additive composition Non-6(cis)-enal Characterisation of the active substance Non-6(cis)-enal Produced by chemical synthesis Purity: min. 96 % assay; secondary component 6–9 % trans-6-nonenal Chemical formula: C 9 H 16 O CAS number: 2277-19-2 FLAVIS No: 05.059 Method of analysis ( 1 ) For the determination non-6(cis)-enal in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL All animal species — — — 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.’ 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures and on the labelling of feed materials and compound feedingstuffs, if the content of the active substance in complete feedingstuff with a moisture content of 12 % exceeds: 5 mg/kg 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 15.3.2028 2b05075 — Hex-3(cis)-enal Additive composition Hex-3(cis)-enal Characterisation of the active substance Hex-3(cis)-enal Produced by chemical synthesis Purity: min. 97 % assay Chemical formula: C 6 H 10 O CAS number: 6789-80-6 FLAVIS No: 05.075 Method of analysis ( 1 ) For the determination of hex-3(cis)-enal in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL All animal species — — — 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.’ 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures and on the labelling of feed materials and compound feedingstuffs, if the content of the active substance in complete feedingstuff with a moisture content of 12 % exceeds: 5 mg/kg. 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 15.3.2028 2b05085 — Hept-4-enal Additive composition Hept-4-enal Characterisation of the active substance Hept-4-enal Produced by chemical synthesis Purity: min. 98 % as sum of (Z)- and (E)-isomers; min. 93 % of (Z)-isomer; secondary component: 2-5 % (E)- isomer. Chemical formula: C 7 H 12 O CAS number: 6728-31-0 FLAVIS No: 05.085 Method of analysis ( 1 ) For the determination of hept-4-enal in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species — — — 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.’ 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures and on the labelling of feed materials and compound feedingstuffs, if the content of the active substance in complete feedingstuff with a moisture content of 12 % exceeds: 5 mg/kg. 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 15.3.2028 2b09197 — Hex-3(cis)-enyl acetate Additive composition Hex-3(cis)-enyl acetate Characterisation of the active substance Hex-3(cis)-enyl acetate Produced by chemical synthesis Purity: min. 98 % assay as sum of (Z)- and (E)-isomers; min. 92 % of (Z)-isomer Chemical formula: C 8 H 14 O 2 CAS number: 3681-71-8 FLAVIS No: 09.197 Method of analysis ( 1 ) For the determination of hex-3(cis)-enyl acetate in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species — — — 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.’ 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures and on the labelling of feed materials and compound feedingstuffs, if the content of the active substance in complete feedingstuff with a moisture content of 12 % exceeds: 5 mg/kg. 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 15.3.2028 2b09240 — Hex-3(cis)-enyl formate Additive composition Hex-3(cis)-enyl formate Characterisation of the active substance Hex-3(cis)-enyl formate Produced by chemical synthesis Purity: min. 95 % assay Chemical formula: C 7 H 12 O 2 CAS number: 33467-73-1 FLAVIS No: 09.240 Method of analysis ( 1 ) For the determination of hex-3(cis)-enyl formate in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species — — — 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.’ 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures and on the labelling of feed materials and compound feedingstuffs, if the content of the active substance in complete feedingstuff with a moisture content of 12 % exceeds: 5 mg/kg. 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 15.3.2028 2b09270 — Hex-3-enyl butyrate Additive composition Hex-3-enyl butyrate Characterisation of the active substance Hex-3-enyl butyrate Produced by chemical synthesis Purity: min. 95 % assay Chemical formula: C 10 H 18 O 2 CAS number: 16491-36-4 FLAVIS No: 09.270 Method of analysis ( 1 ) For the determination of hex-3-enyl butyrate in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species — — — 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.’ 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures and on the labelling of feed materials and compound feedingstuffs, if the content of the active substance in complete feedingstuff with a moisture content of 12 % exceeds: 5 mg/kg. 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 15.3.2028 2b09271 — Hex-3-enyl hexanoate Additive composition Hex-3-enyl hexanoate Characterisation of the active substance Hex-3-enyl hexanoate Produced by chemical synthesis Purity: min. 96 % assay Chemical formula: C 12 H 22 O 2 CAS number: 31501-11-8 FLAVIS No: 09.271 Method of analysis ( 1 ) For the determination of hex-3-enyl hexanoate in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species — — — 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.’ 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures and on the labelling of feed materials and compound feedingstuffs, if the content of the active substance in complete feedingstuff with a moisture content of 12 % exceeds: 5 mg/kg. 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 15.3.2028 2b09563 — Hex-3(cis)-enyl isobutyrate Additive composition Hex-3(cis)-enyl isobutyrate Characterisation of the active substance Hex-3(cis)-enyl isobutyrate Produced by chemical synthesis Purity: min. 98 % assay Chemical formula: C 10 H 18 O 2 CAS number: 41519-23-7 FLAVIS No: 09.563 Method of analysis ( 1 ) For the determination of hex-3(cis)-enyl isobutyrate in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species — — — 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.’ 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures and on the labelling of feed materials and compound feedingstuffs, if the content of the active substance in complete feedingstuff with a moisture content of 12 % exceeds: 5 mg/kg. 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 15.3.2028 2b02011 — Citronellol Additive composition Citronellol Characterisation of the active substance Citronellol Produced by chemical synthesis Purity: min. 90 % assay; racemate; other constituents: diunsaturated and saturated C10 alcohols, citronellyl acetate and citronellal Chemical formula: C 10 H 20 O CAS number: 106-22-9 FLAVIS No: 02.011 Method of analysis ( 1 ) For the determination of citronellol in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species — — — 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 % shall be: — 1 mg/kg for cats — 5 mg/kg for other species and categories. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: — 1 mg/kg for cats — 5 mg/kg for other species and categories’. 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures and on the labelling of feed materials and compound feedingstuffs, if the content of the active substance in complete feedingstuff with a moisture content of 12 % exceeds: — 1 mg/kg for cats — 5 mg/kg for other species and categories. 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 15.3.2028 2b02229 — (-)-3,7-Dimethyl-6-octen-1-ol Additive composition (-)-3,7-Dimethyl-6-octen-1-ol Characterisation of the active substance (-)-3,7-Dimethyl-6-octen-1-ol Produced by chemical synthesis or derived by fractional distillation of essential oils and saponification of extracts Purity: min. 90 % assay Chemical formula: C 10 H 20 O CAS number: 7540-51-4 FLAVIS No: 02.229 Method of analysis ( 1 ) For the determination of (-)-3,7-dimethyl-6-octen-1-ol in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species — — — 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 % shall be: — 1 mg/kg for cats — 5 mg/kg for other species and categories. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: — 1 mg/kg for cats — 5 mg/kg for other species and categories’. 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures and on the labelling of feed materials and compound feedingstuffs, if the content of the active substance in complete feedingstuff with a moisture content of 12 % exceeds: — 1 mg/kg for cats — 5 mg/kg for other species and categories. 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 15.3.2028 2b05021 — Citronellal Additive composition Citronellal Characterisation of the active substance Citronellal Produced by chemical synthesis Purity: min. 85 % assay. Chemical formula: C 10 H 18 O CAS number: 106-23-0 FLAVIS No: 05.021 Method of analysis ( 1 ) For the determination of citronellal in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species — — — 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 % shall be: — 1 mg/kg for cats — 5 mg/kg for other species and categories. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: — 1 mg/kg for cats — 5 mg/kg for other species and categories’ 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures and on the labelling of feed materials and compound feedingstuffs, if the content of the active substance in complete feedingstuff with a moisture content of 12 % exceeds: — 1 mg/kg for cats — 5 mg/kg for other species and categories. 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 15.3.2028 2b05074 — 2,6-Dimethylhept-5-enal Additive composition 2,6-Dimethylhept-5-enal Characterisation of the active substance 2,6-Dimethylhept-5-enal Produced by chemical synthesis Purity: min. 85 % assay Chemical formula: C 9 H 16 O CAS number: 106-72-9 FLAVIS No: 05.074 Method of analysis ( 1 ) For the determination of 2,6-dimethylhept-5-enal in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species — — — 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 % shall be: — 1 mg/kg for cats — 5 mg/kg for other species and categories. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: — 1 mg/kg for cats — 5 mg/kg for other species and categories’. 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures and on the labelling of feed materials and compound feedingstuffs, if the content of the active substance in complete feedingstuff with a moisture content of 12 % exceeds: — 1 mg/kg for cats — 5 mg/kg for other species and categories. 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 15.3.2028 2b08036 — Citronellic acid Additive composition Citronellic acid Characterisation of the active substance Citronellic acid Produced by chemical synthesis Purity: min. 90 % assay Chemical formula: C 10 H 18 O 2 CAS number: 502-47-6 FLAVIS No: 08.036 Method of analysis ( 1 ) For the determination of citronellic acid in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species — — — 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 % shall be: — 1 mg/kg for cats — 5 mg/kg for other species and categories. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: — 1 mg/kg for cats — 5 mg/kg for other species and categories’. 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures and on the labelling of feed materials and compound feedingstuffs, if the content of the active substance in complete feedingstuff with a moisture content of 12 % exceeds: — 1 mg/kg for cats — 5 mg/kg for other species and categories. 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 15.3.2028 2b09012 — Citronellyl acetate Additive composition Citronellyl acetate Characterisation of the active substance Citronellyl acetate Produced by chemical synthesis Purity: min. 92 % assay Chemical formula: C 11 H 22 O 2 CAS number: 150-84-5 FLAVIS No: 09.012 Method of analysis ( 1 ) For the determination of citronellyl acetate in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species — — — 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 % shall be: — 1 mg/kg for cats — 5 mg/kg for other species and categories. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: — 1 mg/kg for cats — 5 mg/kg for other species and categories’. 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures and on the labelling of feed materials and compound feedingstuffs, if the content of the active substance in complete feedingstuff with a moisture content of 12 % exceeds: — 1 mg/kg for cats — 5 mg/kg for other species and categories. 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 15.3.2028 2b09049 — Citronellyl butyrate Additive composition Citronellyl butyrate Characterisation of the active substance Citronellyl butyrate Produced by chemical synthesis Purity: min. 90 % assay Chemical formula: C 14 H 26 O 2 CAS number: 141-16-2 FLAVIS No: 09.049 Method of analysis ( 1 ) For the determination of citronellyl butyrate in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species — — — 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 % shall be: — 1 mg/kg for cats — 5 mg/kg for other species and categories. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: — 1 mg/kg for cats — 5 mg/kg for other species and categories’. 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures and on the labelling of feed materials and compound feedingstuffs, if the content of the active substance in complete feedingstuff with a moisture content of 12 % exceeds: — 1 mg/kg for cats — 5 mg/kg for other species and categories. 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 15.3.2028 2b09078 — Citronellyl formate Additive composition Citronellyl formate Characterisation of the active substance Citronellyl formate Produced by chemical synthesis Purity: min. 90 % assay. Chemical formula: C 11 H 20 O 2 CAS number: 105-85-1 FLAVIS No: 09.078 Method of analysis ( 1 ) For the determination of citronellyl formate in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species — — — 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 % shall be: — 1 mg/kg for cats — 5 mg/kg for other species and categories. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: — 1 mg/kg for cats — 5 mg/kg for other species and categories’. 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures and on the labelling of feed materials and compound feedingstuffs, if the content of the active substance in complete feedingstuff with a moisture content of 12 % exceeds: — 1 mg/kg for cats — 5 mg/kg for other species and categories. 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 15.3.2028 2b09129 — Citronellyl propionate Additive composition Citronellyl propionate Characterisation of the active substance Citronellyl propionate Produced by chemical synthesis Purity: min. 95 % assay Chemical formula: C 13 H 24 O 2 CAS number: 141-14-0 FLAVIS No: 09.129 Method of analysis ( 1 ) For the determination of citronellyl propionate in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species — — — 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 % shall be: — 1 mg/kg for cats — 5 mg/kg for other species and categories. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: — 1 mg/kg for cats — 5 mg/kg for other species and categories’. 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures and on the labelling of feed materials and compound feedingstuffs, if the content of the active substance in complete feedingstuff with a moisture content of 12 % exceeds: — 1 mg/kg for cats — 5 mg/kg for other species and categories. 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 15.3.2028 2b06081 — 1-Ethoxy-1-(3-hexenyloxy)ethane Additive composition 1-Ethoxy-1-(3-hexenyloxy)ethane Characterisation of the active substance 1-Ethoxy-1-(3-hexenyloxy)ethane Produced by chemical synthesis Purity: min. 97 % assay Chemical formula: C 10 H 20 O 2 CAS number: 28069-74-1 FLAVIS No: 06.081 Method of analysis ( 1 ) For the determination of 1-ethoxy-1-(3-hexenyloxy)ethane in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species — — — 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 1 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 1 mg/kg.’ 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures and on the labelling of feed materials and compound feedingstuffs, if the content of the active substance in complete feedingstuff with a moisture content of 12 % exceeds: 1 mg/kg. 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 15.3.2028 2b09505 — Hex-3-enyl isovalerate Additive composition Hex-3-enyl isovalerate Characterisation of the active substance Hex-3-enyl isovalerate Produced by chemical synthesis Purity: min. 95 % assay Chemical formula: C 11 H 20 O 2 CAS number: 10032-11-8 FLAVIS No: 09.505 Method of analysis ( 1 ) For the determination of hex-3-enyl isovalerate in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species — — — 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 1 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 1 mg/kg.’ 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures and on the labelling of feed materials and compound feedingstuffs, if the content of the active substance in complete feedingstuff with a moisture content of 12 % exceeds: 1 mg/kg. 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 15.3.2028 ( 1 ) Details of the analytical methods are available at the following address of the Reference Laboratory: https://ec.europa.eu/jrc/en/eurl/feed-additives/evaluation-reports.
Source: EUR-Lex (Publications Office of the EU), © European Union, reuse permitted under Commission Decision 2011/833/EU.