Definition
Implementing Regulation (EU) 2016/323 is amended as follows:
(1)
Article 2 is replaced by the following:
‘Article 2
Definition
For the purposes of this Regulation, “movement” means a movement between two or more Member States of goods under excise duty suspension within the meaning of Chapter IV of Directive 2008/118/EC.’;
(2)
in Article 8, the first paragraph is replaced by the following:
‘Where the requested authority refuses to handle a request for information, to carry out an administrative enquiry relating to the requested information, or to provide the information requested, it shall notify the requesting authority by means of an “Answer message” document, as set out in Table 8 of Annex I to this Regulation.’;
(3)
Article 16 is replaced by the following:
‘Article 16
Feedback on follow-up action taken as a result of exchange of information
A request for feedback and feedback on follow-up action in accordance with Article 8(5), Article 15(2) or Article 16(2) of Regulation (EU) No 389/2012 shall be made by means of an “Administrative cooperation results” document, as set out in Table 10 of Annex I to this Regulation. The feedback shall be provided by sending a further “Administrative cooperation results” document, as set out in Table 10.’;
(4)
Annex I is amended as set out in Annex I to this Regulation;
(5)
Annex II is amended as set out in Annex II to this Regulation.
ANNEX ISupplementary provisions
ANNEX I
In Annex I to Regulation (EU) 2016/323, Tables 1 to 14 are replaced by the following:
‘ Table 1
(as referred to in Article 4(1))
Movement Download Request
A
B
C
D
E
F
G
1
ATTRIBUTES
R
a
Request Correlation Identifier
R
The value of <Request Correlation Identifier> is unique per Member State.
an..44
2
EXCISE MOVEMENT e-AD
R
a
ARC
R
(see Code list 2 in Annex II to Regulation (EC) No 684/2009)
an21
b
Sequence Number
R
The value of the Data Item must be greater than zero.
n..2
c
National Movement Information Requested flag
R
The format of Boolean is digital: ‘0’ or ‘1’ (‘0’ = No or False; ‘1’ = Yes or True)
n1
d
Status
R
The possible values are:
X01
=
Accepted
X02
=
Cancelled
X03
=
Delivered
X04
=
Diverted
X05
=
Rejected
X06
=
Replaced
X07
=
e-AD Manually closed
X08
=
Refused
X09
=
None
X10
=
Partially Refused
X11
=
Exporting
X12
=
Accepted for Export
X13
=
Stopped
an3
e
Last Received Message Type
R
The possible values are:
IE801
=
E-AD
IE803
=
NOTIFICATION OF DIVERTED E-AD
IE807
=
INTERRUPTION OF MOVEMENT
IE810
=
CANCELLATION OF AN E-AD
IE813
=
CHANGE OF DESTINATION
IE818
=
ACCEPTED OR (PARTIALLY) REFUSED REPORT OF RECEIPT/EXPORT
IE819
=
ALERT OR REJECTION OF AN E-AD
IE829
=
NOTIFICATION OF ACCEPTED EXPORT
IE839
=
REJECTION OF E-AD FOR EXPORT
IE905
=
STATUS RESPONSE
None
=
NONE
Note: The IE905 should be included only when the e-AD is manually closed.
an..5
f
Status Request Message Type
O
The possible values are:
1
=
Status Synchronisation Request
2
=
Movement History Request
n1
Table 2
(as referred to in the first subparagraph of Article 4(2))
Movement Download Answer
A
B
C
D
E
F
G
1
ATTRIBUTES
R
a
Request Correlation Identifier
R
The value of <Request Correlation Identifier> is unique per Member State.
an..44
2
EXCISE MOVEMENT e-AD
R
a
ARC
R
(see Code list 2 in Annex II to Regulation (EC) No 684/2009)
an21
b
Sequence Number
R
The value of the Data Item must be greater than zero.
n..2
c
Status
R
The possible values of <Status> are:
X01
=
Accepted
X02
=
Cancelled
X03
=
Delivered
X04
=
Diverted
X05
=
Rejected
X06
=
Replaced
X07
=
e-AD Manually closed
X08
=
Refused
X09
=
None
X10
=
Partially Refused
X11
=
Exporting
X12
=
Accepted for Export
X13
=
Stopped
an3
d
Last Received Message Type
R
The possible values are:
IE801
=
E-AD
IE803
=
NOTIFICATION OF DIVERTED E-AD
IE807
=
INTERRUPTION OF MOVEMENT
IE810
=
CANCELLATION OF AN E-AD
IE813
=
CHANGE OF DESTINATION
IE818
=
ACCEPTED OR (PARTIALLY) REFUSED REPORT OF RECEIPT/EXPORT
IE819
=
ALERT OR REJECTION OF AN E-AD
IE829
=
NOTIFICATION OF ACCEPTED EXPORT
IE839
=
REJECTION OF E-AD FOR EXPORT
IE905
=
STATUS RESPONSE
None
=
NONE
Note: The IE905 should be included only when the e-AD is manually closed.
an..5
Table 3
(as referred to in the second subparagraph of Article 4(2))
History of a movement
A
B
C
D
E
F
G
1
ATTRIBUTES
R
a
Request Correlation Identifier
R
The value of <Request Correlation Identifier> is unique per Member State.
an..44
2
All validated e-ADs
R
The set of all draft electronic administrative documents and electronic administrative documents relating to the movement, the structure of which is set out in Table 1 of Annex I to Regulation (EC) No 684/2009
99x
3
All Reports of Receipt/Export
O
The set of all Report of receipt/Report of export messages relating to the movement, the structure of which is set out in Table 6 of Annex I to Regulation (EC) No 684/2009
99x
4
Last Notification of Diverted e-AD
O
The content of the last Notification of change of destination/Notification of splitting message relating to the movement, the structure of which is set out in Table 4 of Annex I to Regulation (EC) No 684/2009
1x
5
All Control Reports
O
The set of all Control Report messages relating to the movement, the structure of which is set out in Table 11
99x
6
All Event Reports
O
The set of all Event Report messages relating to the movement, the structure of which is set out in Table 12
99x
7
All explanations of delay for delivery
O
The set of all Explanation on delay for delivery messages relating to the movement
99x
7.1
ATTRIBUTES
R
a
Message Role
R
The possible values are:
1
=
Explanation on delay for sending the report of receipt/export
2
=
Explanation on delay for giving destination
n1
b
Date and Time of Validation of Explanation on Delay
C
—
‘R’ after successful validation
—
Does not apply otherwise
dateTime
c
Submitter Type
R
The possible values are:
1
=
Consignor
2
=
Consignee
n1
d
Submitter Identification R an13 Rule072
R
The <Submitter Identification> is a valid trader excise number.
(see Code list 1 in Annex II to Regulation (EU) No 612/2013)
an13
e
Explanation Code
R
(see Code list 7 in Annex II)
n..2
f
Complementary Information
C
—
‘R’ if <Explanation Code> is ‘Other’
—
‘O’ Otherwise
(see Explanation Code in box 7.1e)
an..350
g
Complementary Information_LNG
C
—
‘R’ if the corresponding text field(s) is(are) used
—
Does not apply otherwise
Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group
a2
7.2
EXCISE MOVEMENT e-AD
R
a
ARC
R
(see Code list 2 in Annex II to Regulation (EC) No 684/2009)
an21
b
Sequence Number
R
The value of the Data Item must be greater than zero.
n..2
8
All Notifications of Export
O
The set of all Notification of accepted export messages relating to the movement
99x
8.1
ATTRIBUTES
R
a
Date and Time of Issuance
R
dateTime
8.2
EXCISE MOVEMENT e-AD
R
99x
a
ARC
R
(see Code list 2 in Annex II to Regulation (EC) No 684/2009)
an21
b
Sequence Number
R
The value of the Data Item must be greater than zero.
n..2
8.3
TRADER Consignee
C
Does not apply if <Message Type> of all concerned e-ADs is ‘Submission for export (local clearance)’
—
‘R’ otherwise
a
Trader Identification
C
—
‘R’ if <Destination Type Code> is:
—
“Destination - Tax warehouse”
—
“Destination - Registered consignee”
—
“Destination - Temporary registered consignee”
—
“Destination - Direct delivery”
—
‘O’ if <Destination Type Code> is ‘Destination – Export’
—
Does not apply otherwise
The possible values of <Trader Identification> are described in the following table:
Destination Type Code
TRADER CONSIGNEE. Trader Identification
TRADER Place of Delivery.Trader Identification
1 -
Destination - Tax warehouse
Excise number ( 1 )
Tax Warehouse Reference (Excise Number) ( 5 )
2 -
Destination - Registered consignee
Excise number ( 2 )
Any identification ( *1 )
3 -
Destination - Temporary registered consignee
Temporary authorisation reference ( 4 )
Any identification ( *1 )
4 -
Destination - Direct delivery
Excise number ( 3 )
(Does not apply)
5 -
Destination - Exempted consignee
(Does not apply)
Any identification ( *1 )
6 -
Destination – Export
VAT number (optional)
(The data group <TRADER Place of Delivery> does not exist)
(see Code list 1 and Code list 2 in Annex II to Regulation (EU) No 612/2013, if applicable)
an..16
b
EORI Number
C
—
‘O’ if <Destination Type Code> is ‘Destination – Export’
—
Does not apply otherwise
Provide the EORI number of the person responsible for lodging the export declaration as set out in Article 21(5) of Directive 2008/118/EC.
an..17
c
Trader Name
R
an..182
d
Street Name
R
an..65
e
Street Number
O
an..11
f
Postcode
R
an..10
g
City
R
an..50
h
NAD_LNG
R
Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group
a2
8.4
OFFICE Place of Export
O
a
Office Reference Number
R
(see Code list 5 in Annex II to Regulation (EC) No 684/2009)
an8
8.5
EXPORT ACCEPTANCE
R
a
Sender Customs Office Reference Number
R
(see Code list 5 in Annex II to Regulation (EC) No 684/2009)
an8
b
Sender Customs Officer Identification
O
an..35
c
Date of Acceptance
R
date
d
MRN Export
R
A valid MRN or SAD Number confirmed against Customs data, according to the Customs case.
MRN
=
Movement Reference Number
SAD
=
Single Administrative Document
an..21
9
All Notifications of refusal by Customs
O
The set of all Customs rejection of e-AD messages relating to the movement
99x
9.1
ATTRIBUTES
R
a
Date and Time of Issuance
R
dateTime
9.2
The concerned draft e-AD
C
In the case of rejection at import one concerned draft e-AD must be given or in the case of rejection at export one or several concerned validated e-ADs must be given.
(see All concerned validated e-ADs in box 9.3)
a
Local Reference Number
R
an..22
9.3
All concerned validated e-ADs
C
In the case of rejection at import one concerned draft e-AD must be given or in the case of rejection at export one or several concerned validated e-ADs must be given.
(see The concerned draft e-AD in box 9.2)
99x
a
ARC
R
(see Code list 2 in Annex II to Regulation (EC) No 684/2009)
an21
b
Sequence Number
R
n..2
9.4
REJECTION
R
a
Rejection Date and Time
R
dateTime
b
Rejection Reason Code
R
The possible values are:
1
=
Import data not found
2
=
The contents of the e-AD does not match with import data
3
=
Export data not found
4
=
The content of the e-AD does not match with export data
5
=
Goods are rejected at export procedure
n1
9.5
EXPORT CROSS CHECKING DIAGNOSES
C
‘R’ if <Rejection Reason Code> is “The content of the e-AD does not match with export data”
—
Does not apply otherwise
(see Rejection Reason Code in box 9.4b)
a
LRN Export
C
At least one of the following attributes must be present:
—
<MRN Export>
—
<LRN Export>
(see MRN Export in box 9.5b)
an..22
b
MRN Export
C
At least one of the following attributes must be present:
—
<MRN Export>
—
<LRN Export>
(see LRN Export in box 9.5a)
A valid MRN or SAD Number confirmed against Customs data, according to the Customs case.
MRN
=
Movement Reference Number
SAD
=
Single Administrative Document
an..21
9.6
DIAGNOSIS
R
999x
a
ARC
R
(see Code list 2 in Annex II to Regulation (EC) No 684/2009)
an21
b
Body Record Unique Reference
R
The value of the Data Item must be greater than zero.
n..3
c
Diagnosis Code
R
The possible values are:
1
=
Unknown ARC
2
=
Body Record Unique Reference does not exist in the e-AD
3
=
No corresponding GOODS ITEM in the export declaration
4
=
Weight/mass do not match
5
=
The destination type code of the e-AD is not export
6
=
CN codes do not match
n1
9.7
TRADER Consignee
C
—
‘R’ if <Message Type> of all concerned e-ADs is not “Submission for export (local clearance)”
—
Does not apply otherwise
The possible Message Types are:
1
=
Standard submission (to be used in all cases except where submission concerns export with local clearance)
2
=
Submission for export with local clearance (Application of Article 283 of Commission Regulation (EEC) No 2454/93 (1))
The message type must not occur in the e-AD to which an ARC has been assigned, nor in the paper document referred to in Article 8(1) of Regulation (EC) No 684/2009
a
Trader Identification
C
—
‘R’ if <Destination Type Code> is in:
—
“Destination - Tax warehouse”
—
“Destination - Registered consignee”
—
“Destination - Temporary registered consignee”
—
“Destination - Direct delivery”
—
‘O’ if <Destination Type Code> is ‘Destination – Export’
—
Does not apply otherwise
The possible values of <Trader Identification> are described in the following table:
Destination Type Code
TRADER CONSIGNEE. Trader Identification
TRADER Place of Delivery.Trader Identification
1 -
Destination - Tax warehouse
Excise number ( 6 )
Tax Warehouse Reference (Excise Number) ( 10 )
2 -
Destination - Registered consignee
Excise number ( 7 )
Any identification ( *2 )
3 -
Destination - Temporary registered consignee
Temporary authorisation reference ( 9 )
Any identification ( *2 )
4 -
Destination - Direct delivery
Excise number ( 8 )
(Does not apply)
5 -
Destination - Exempted consignee
(Does not apply)
Any identification ( *2 )
6 -
Destination – Export
VAT number (optional)
(The data group <TRADER Place of Delivery> does not exist)
(see Code list 1 and Code list 2 in Annex II to Regulation (EU) No 612/2013, if applicable)
an..16
b
EORI Number
C
—
‘O’ if <Destination Type Code> is ‘Destination – Export’
—
Does not apply otherwise
Provide the EORI number of the person responsible for lodging the export declaration as set out in Article 21(5) of Directive 2008/118/EC.
an..17
c
Trader Name
R
an..182
d
Street Name
R
an..65
e
Street Number
O
an..11
f
Postcode
R
an..10
g
City
R
an..50
h
NAD_LNG
R
Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group
a2
9.8
OFFICE Place of Export
O
a
Office Reference Number
R
(see Code list 5 in Annex II to Regulation (EC) No 684/2009)
an8
10
The Possible Interruption of Movement
O
The content of a possible Interruption of movement message relating to the movement, the structure of which is set out in Table 13
1x
11
The Possible Cancellation of e-AD
O
The content of a possible Cancellation message relating to the movement, the structure of which is set out in Table 2 of Annex I to Regulation (EC) No 684/2009
1x
12
All Changes of Destination
O
The set of all Change of destination messages relating to the movement, the structure of which is set out in Table 3 of Annex I to Regulation (EC) No 684/2009
99x
13
All Alerts or Rejections of an e-AD
O
The set of all Alert or Rejection of an e-AD messages relating to the movement, the structure of which is set out in Table 14
99x
13.1
ATTRIBUTES
R
a
Date and Time of Validation of Alert or Rejection
C
—
‘R’ after successful validation
—
Does not apply otherwise
dateTime
13.2
EXCISE MOVEMENT e-AD
R
a
ARC
R
(see Code list 2 in Annex II to Regulation (EC) No 684/2009)
an21
b
Sequence Number
R
The value of the Data Item must be greater than zero.
n..2
13.3
TRADER Consignee
R
a
Trader Identification
C
—
‘R’ if <Destination Type Code> is in:
—
“Destination - Tax warehouse”
—
“Destination - Registered consignee”
—
“Destination - Temporary registered consignee”
—
“Destination - Direct delivery”
—
‘O’ if <Destination Type Code> is ‘Destination – Export’
—
Does not apply otherwise
The possible values of <Trader Identification> are described in the following table:
Destination Type Code
TRADER CONSIGNEE. Trader Identification
TRADER Place of Delivery.Trader Identification
1 -
Destination - Tax warehouse
Excise number ( 11 )
Tax Warehouse Reference (Excise Number) ( 15 )
2 -
Destination - Registered consignee
Excise number ( 12 )
Any identification ( *3 )
3 -
Destination - Temporary registered consignee
Temporary authorisation reference ( 14 )
Any identification ( *3 )
4 -
Destination - Direct delivery
Excise number ( 13 )
(Does not apply)
5 -
Destination - Exempted consignee
(Does not apply)
Any identification ( *3 )
6 -
Destination – Export
VAT number (optional)
(The data group <TRADER Place of Delivery> does not exist)
(see Code list 1 and Code list 2 in Annex II to Regulation (EU) No 612/2013, if applicable)
an..16
b
EORI Number
C
—
‘O’ if <Destination Type Code> is ‘Destination – Export’
—
Does not apply otherwise
Provide the EORI number of the person responsible for lodging the export declaration as set out in Article 21(5) of Directive 2008/118/EC.
an..17
c
Trader Name
R
an..182
d
Street Name
R
an..65
e
Street Number
O
an..11
f
Postcode
R
an..10
g
City
R
an..50
h
NAD_LNG
R
Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group
a2
13.4
OFFICE of Destination
R
a
Office Reference Number
R
(see Code list 5 in Annex II to Regulation (EC) No 684/2009)
an8
13.5
ALERT
R
a
Date of Alert
R
date
b
E-AD Rejected flag
R
The format of Boolean is digital: ‘0’ or ‘1’ (‘0’ = No or False; ‘1’ = Yes or True)
n1
13.6
ALERT OR REJECTION OF E-AD REASON Code
C
—
‘R’ if <E-AD Rejected flag> is True
—
‘O’ if <E-AD Rejected flag> is False
(see E-AD Rejected Flag in box 13.5b)
9x
a
Alert or Rejection of E-AD Reason Code
R
(see Code list 5 in Annex II)
n..2
b
Complementary Information
C
—
‘R’ if <Alert or Rejection of E-AD Reason Code> is ‘Other’
—
‘O’ otherwise
(see Alert or Rejection of E-AD Reason Code in box 13.6a)
an..350
c
Complementary Information_LNG
C
—
‘R’ if the corresponding text field is used
—
Does not apply otherwise
Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group
a2
14
All Explanations on reason for shortage
O
99x
14.1
ATTRIBUTES
R
a
Submitter Type
R
The possible values are:
1
=
Consignor
2
=
Consignee
n1
b
Date and Time of Validation of Explanation on Shortage
C
—
‘R’ after successful validation
—
Does not apply otherwise
dateTime
14.2
EXCISE MOVEMENT e-AD
R
a
ARC
R
(see Code list 2 in Annex II to Regulation (EC) No 684/2009)
an21
b
Sequence Number
R
The value of the Data Item must be greater than zero.
n..2
14.3
TRADER Consignor
C
—
‘R’ if <Submitter Type> is “Consignor”
—
Does not apply otherwise
(see Submitter Type in box 14.1a)
a
Trader Excise Number
R
For TRADER Consignor
An existing identifier <Trader Excise Number> in the set of <TRADER AUTHORISATION>
The <Operator Type Code> of the referred <TRADER> must be:
—
“Authorised warehouse keeper”; OR
—
“Registered consignor”
For TRADER Place of dispatch
An existing identifier <Tax Warehouse Reference> (Excise Number in SEED).
(see Code list 1 in Annex II to Regulation (EU) No 612/2013)
an13
b
Trader Name
R
an..182
c
Street Name
R
an..65
d
Street Number
O
an..11
e
Postcode
R
an..10
f
City
R
an..50
g
NAD_LNG
R
Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group
a2
14.4
TRADER Consignee
C
—
‘R’ if <Submitter Type> is not “Consignor”
—
Does not apply otherwise
(see Submitter Type in box 14.1a)
a
Trader Identification
C
—
‘R’ if <Destination Type Code> is in:
—
“Destination - Tax warehouse”
—
“Destination - Registered consignee”
—
“Destination — Temporary registered consignee”
—
“Destination — Direct delivery”
—
‘O’ if <Destination Type Code> is ‘Destination – Export’
—
Does not apply otherwise
The possible values of <Trader Identification> are described in the following table:
Destination Type Code
TRADER CONSIGNEE. Trader Identification
TRADER Place of Delivery.Trader Identification
1 -
Destination - Tax warehouse
Excise number ( 16 )
Tax Warehouse Reference (Excise Number) ( 20 )
2 -
Destination - Registered consignee
Excise number ( 17 )
Any identification ( *4 )
3 -
Destination - Temporary registered consignee
Temporary authorisation reference ( 19 )
Any identification ( *4 )
4 -
Destination - Direct delivery
Excise number ( 18 )
(Does not apply)
5 -
Destination - Exempted consignee
(Does not apply)
Any identification ( *4 )
6 -
Destination – Export
VAT number (optional)
(The data group <TRADER Place of Delivery> does not exist)
8 -
Unknown destination
(Does not apply)
(Does not apply)
(see Code list 1 and Code list 2 in Annex II to Regulation (EU) No 612/2013, if applicable)
an..16
b
EORI Number
—
‘O’ if <Destination Type Code> is ‘Destination – Export’
—
Does not apply otherwise
Provide the EORI number of the person responsible for lodging the export declaration as set out in Article 21(5) of Directive 2008/118/EC
an..17
c
Trader Name
R
an..182
d
Street Name
R
an..65
e
Street Number
O
an..11
f
Postcode
R
an..10
g
City
R
an..50
h
NAD_LNG
R
Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group
a2
14.5
ANALYSIS
C
At least one of the <ANALYSIS> or <ANALYSIS Body> data groups must be present
a
Date of Analysis
R
date
b
Global Explanation
R
an..350
c
Global Explanation_LNG
R
Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group
a2
14.6
ANALYSIS Body
C
At least one of the <ANALYSIS> or <ANALYSIS Body> data groups must be present
999x
a
Body Record Unique Reference
R
The value of the Data Item must be greater than zero.
The <Body Record Unique Reference> must be unique within the message and must refer to a <Body Record Unique Reference> of the e-AD Body of the associated e-AD for which shortages or excesses have been declared.
n..3
b
Excise Product Code
R
(see Code list 11 in Annex II to Regulation (EC) No 684/2009)
an4
c
Explanation
O
an..350
d
Explanation_LNG
C
—
‘R’ if the corresponding text field(s) is(are) used
—
Does not apply otherwise
Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group
a2
e
Actual Quantity
O
The value of the Data Item must be greater than zero.
n..15,3
15
All reminder messages for Excise movement
O
99x
15.1
ATTRIBUTES
R
a
Message Type
R
The possible values are:
1
=
Reminder message at expiry of time to change destination (or split)
2
=
Reminder message at expiry of time to send the report of receipt/export
3
=
Reminder message at expiry of time to give destination information (Article 22 of Directive 2008/118/EC)
n1
b
Date and Time of Issuance of Reminder
R
dateTime
c
Limit date and Time
R
dateTime
d
Reminder Information
O
an..350
e
Reminder Information_LNG
C
—
‘R’ if the corresponding text field(s) is(are) used
—
Does not apply otherwise
Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group
a2
15.2
EXCISE MOVEMENT e-AD
R
a
ARC
R
(see Code list 2 in Annex II to Regulation (EC) No 684/2009)
an21
b
Sequence Number
R
The value of the Data Item must be greater than zero.
n..2
Table 4
(as referred to in Article 5(1))
Common Request
A
B
C
D
E
F
G
1
ATTRIBUTES
R
a
Request Type
R
The possible values are:
1
=
(reserved)
2
=
Request for reference data
3
=
Request for EOL
4
=
(reserved)
5
=
Request for re-synchronisation of the register of economic operators
6
=
Request for retrieval of a list of e-ADs
7
=
Request for SEED statistics
n1
b
Request Message Name
C
—
‘R’ if <Request Type> is ‘2’
—
Does not apply otherwise
(see Request Type in box 1a)
The possible values are:
“C_COD_DAT”
=
Common list of codes
“C_PAR_DAT”
=
Common system parameters
“ALL”
=
For complete structure
a..9
c
Requesting Office
R
(see Code list 5 in Annex II to Regulation (EC) No 684/2009)
an8
d
Request Correlation Identifier
C
—
‘R’ if <Request Type> is ‘2’, ‘5’, ‘6’, or ‘7’
—
Does not apply otherwise
(see Request Type in box 1a)
The value of <Request Correlation Identifier> is unique per Member State
an..44
e
Start Date
C
For 1 e and f:
—
‘R’ if <Request Type> is ‘2’ or ‘5’
—
Does not apply otherwise
(see Request Type in box 1a)
date
f
End Date
C
date
g
Single Date
C
—
‘R’ if <Request Type> is ‘5’
—
Does not apply otherwise
(see Request Type in box 1a)
date
2
E-AD LIST REQUEST
C
—
‘R’ if <Request Type> is ‘6’
—
Does not apply otherwise
(see Request Type in box 1a)
a
Member State Code
R
(see Code list 3 in Annex II to Regulation (EC) No 684/2009)
a2
2.1
RA_PRIMARY CRITERION
R
99x
a
Primary Criterion Type Code
R
The possible values are:
1
=
ARC
2
=
Brand name of product
3
=
Categories of excise products of the movement
4
=
(reserved)
5
=
(reserved)
6
=
(reserved)
7
=
(reserved)
8
=
City of consignee
9
=
City of consignor
10
=
City of guarantor
11
=
(reserved)
12
=
City of place of delivery
13
=
City of tax warehouse of dispatch
14
=
City of transporter
15
=
CN code of product
16
=
Date of invoice
17
=
Excise number of consignee
18
=
Excise number of consignor
19
=
Excise number of guarantor
20
=
(reserved)
21
=
(reserved)
22
=
Excise number of the tax warehouse of destination
23
=
Excise number of the tax warehouse of dispatch
24
=
(reserved)
25
=
Excise product code
26
=
Journey time
27
=
Member State of destination
28
=
Member State of dispatch
29
=
Name of consignee
30
=
Name of consignor
31
=
Name of guarantor
32
=
(reserved)
33
=
Name of place of delivery
34
=
Name of tax warehouse of dispatch
35
=
Name of transporter
36
=
Number of invoice
37
=
Postal code of consignee
38
=
Postal code of consignor
39
=
Postal code of guarantor
40
=
(reserved)
41
=
Postal code of place of delivery
42
=
Postal code of tax warehouse of dispatch
43
=
Postal code of transporter
44
=
Quantity of goods (in an e-AD body)
45
=
Local Reference Number, being a serial number, assigned by the consignor
46
=
Type of transport
47
=
(reserved)
48
=
(reserved)
49
=
VAT number of the consignee
50
=
(reserved)
51
=
VAT number of the transporter
52
=
Change of destination (sequence number ≥ 2)
n..2
2.1.1
RA_PRIMARY VALUE
O
99x
a
Value
R
an..255
3
STA_REQUEST
C
—
‘R’ if <Request Type> is ‘7’
—
Does not apply otherwise
(see Request Type in box 1a)
a
Statistic Type
R
The possible values are:
1
=
Active and inactive economic operators
2
=
Pending expirations
3
=
Economic operators by type and tax warehouses
4
=
Excise activity
5
=
Changes to excise authorisations
n1
3.1
LIST OF MEMBER STATES Code
R
99x
a
Member State Code
R
(see Code list 3 in Annex II to Regulation (EC) No 684/2009)
a2
4
STA_PERIOD
C
—
‘R’ if <Request Type> is ‘7’
—
Does not apply otherwise
(see Request Type in box 1a)
a
Year
R
The value of the data element must be greater than zero
n4
b
Semester
C
For 4 b , c , and d :
The three following data fields are optional and exclusive:
—
<Semester>
—
<Quarter>
—
<Month>
i.e. If one of these data fields is given then the two other data fields do not apply
The possible values are:
1
=
First semester
2
=
Second semester
n1
c
Quarter
C
The possible values are:
1
=
First quarter
2
=
Second quarter
3
=
Third quarter
4
=
Fourth quarter
n1
d
Month
C
The possible values are:
1
=
January
2
=
February
3
=
March
4
=
April
5
=
May
6
=
June
7
=
July
8
=
August
9
=
September
10
=
October
11
=
November
12
=
December
n..2
5
REF_REQUEST
C
—
‘R’ if <Request Type> is ‘2’
—
Does not apply otherwise
(see Request Type in box 1a)
a
Common Risk Assessment Criteria flag
O
The possible values are:
0
=
No or False
1
=
Yes or True
n1
5.1
LIST OF CODES Code
O
99x
a
Requested List of Code
O
The possible values are:
1
=
Units of measure
2
=
Events types
3
=
Evidence types
4
=
(reserved)
5
=
(reserved)
6
=
Language codes
7
=
Member States
8
=
Country codes
9
=
Packaging codes
10
=
Reasons for unsatisfactory receipt or control report
11
=
Reasons for interruption
12
=
(reserved)
13
=
Transport modes
14
=
Transport units
15
=
Wine-growing zones
16
=
Wine operation codes
17
=
Excise product categories
18
=
Excise products
19
=
CN codes
20
=
Correspondences CN code - Excise product
21
=
Cancellation reasons
22
=
Alert or rejection of e-AD reasons
23
=
Delay explanations
24
=
(reserved)
25
=
Event submitting persons
26
=
Refusal reasons
27
=
Reasons for delayed result
28
=
Administrative cooperation actions
29
=
Administrative cooperation request reasons
30
=
(reserved)
31
=
(reserved)
32
=
(reserved)
33
=
(reserved)
34
=
Administrative cooperation action not possible reasons
35
=
Common request rejection reasons
36
=
(reserved)
37
=
Movement verification request reasons
38
=
Movement verification actions
n..2
Table 5
(as referred to in Article 5(2))
List of e-AD as result of a general query
A
B
C
D
E
F
G
1
ATTRIBUTES
R
a
Requesting Office
R
(see Code list 5 in Annex II to Regulation (EC) No 684/2009)
an8
b
Request Correlation Identifier
R
The value of <Request Correlation Identifier> is unique per Member State.
an..44
2
E-AD LIST ITEM
O
99x
a
Dispatch Date
R
date
2.1
EXCISE MOVEMENT
R
a
ARC
R
(see Code list 2 in Annex II to Regulation (EC) No 684/2009)
an21
b
Date and Time of Validation of e-AD
R
dateTime
c
Sequence Number
R
The value of the data element must be greater than zero
n..2
2.2
TRADER Consignor
R
a
Trader Excise Number
R
For TRADER Consignor
An existing identifier <Trader Excise Number> in the set of <TRADER AUTHORISATION>
The <Operator Type Code> of the referred <TRADER> must be:
—
“Authorised warehouse keeper”; OR
—
“Registered consignor”
(see Code list 1 in Annex II to Regulation (EU) No 612/2013)
an13
b
Trader Name
R
an..182
2.3
TRADER Place of Dispatch
C
IF <E-AD.Origin Type Code> is “Origin - Tax warehouse”
THEN
<TRADER Place of Dispatch> is ‘R’
<OFFICE of Dispatch - Import> does not apply
ELSE
<TRADER Place of Dispatch> does not apply
<OFFICE of Dispatch - Import> is ‘R’
a
Tax Warehouse Reference
R
For TRADER Place of dispatch
An existing identifier <Tax Warehouse Reference> (Excise Number in SEED).
(see Code list 1 in Annex II to Regulation (EU) No 612/2013)
an13
b
Trader Name
O
an..182
2.4
OFFICE of Dispatch - Import
C
IF <E-AD.Origin Type Code> is “Origin - Tax warehouse”
THEN
<TRADER Place of Dispatch> is ‘R’
<OFFICE of Dispatch - Import> does not apply
ELSE
<TRADER Place of Dispatch> does not apply
<OFFICE of Dispatch - Import> is ‘R’
a
Office Reference Number
R
(see Code list 5 in Annex II to Regulation (EC) No 684/2009)
an8
2.5
TRADER Consignee
R
a
Trader Identification
C
IF <Destination Type Code> is in:
—
“Destination - Tax warehouse”
—
“Destination - Registered consignee”
—
“Destination - Temporary registered consignee”
—
“Destination - Direct delivery”
THEN <TRADER Consignee.Trader Identification> is ‘R’
ELSE
IF <Destination Type Code> is:
—
“Destination – Export”
THEN <TRADER Consignee.Trader Identification> is ‘O’
ELSE <TRADER Consignee.Trader Identification> does not apply
The possible values of <Trader Identification> are described in the following table:
Destination Type Code
TRADER CONSIGNEE. Trader Identification
TRADER Place of Delivery.Trader Identification
1 -
Destination - Tax warehouse
Excise number ( 21 )
Tax Warehouse Reference (Excise Number) ( 25 )
2 -
Destination - Registered consignee
Excise number ( 22 )
Any identification ( *5 )
3 -
Destination - Temporary registered consignee
Temporary authorisation reference ( 24 )
Any identification ( *5 )
4 -
Destination - Direct delivery
Excise number ( 23 )
(Does not apply)
5 -
Destination - Exempted consignee
(Does not apply)
Any identification ( *5 )
6 -
Destination – Export
VAT number (optional)
(The data group <TRADER Place of Delivery> does not exist)
8 –
Unknown destination
(Does not apply)
(Does not apply)
(see Code list 1 and Code list 2 in Annex II to Regulation (EU) No 612/2013, if applicable)
an..16
b
EORI Number
C
—
‘O’ if <Destination Type Code> is “Destination – Export”
—
Does not apply otherwise
Provide the EORI number of the person responsible for lodging the export declaration as set out in Article 21(5) of Directive 2008/118/EC
an..17
c
Trader Name
R
an..182
2.6
TRADER Place of Delivery
C
The optionality of data groups <TRADER Place of Delivery> and <OFFICE Place of Delivery – Customs> are described below, according to the <Destination Type Code>:
—
‘R’ for Destination Type Code 1 and 4
—
‘O’ for Destination Type Code 2, 3 and 5
—
does not apply otherwise.
a
Trader Identification
C
IF <Destination Type Code> is “Destination - Tax warehouse”
THEN <TRADER Place of Delivery. Trader Identification> is ‘R’
ELSE
IF <Destination Type Code> is “Destination - Direct delivery”
THEN <TRADER Place of Delivery. Trader Identification> does not apply
ELSE <TRADER Place of Delivery. Trader Identification> is ‘O’
The possible values of <Trader Identification> are described in the following table:
Destination Type Code
TRADER CONSIGNEE. Trader Identification
TRADER Place of Delivery.Trader Identification
1 -
Destination - Tax warehouse
Excise number ( 26 )
Tax Warehouse Reference (Excise Number) ( 30 )
2 -
Destination - Registered consignee
Excise number ( 27 )
Any identification ( *6 )
3 -
Destination - Temporary registered consignee
Temporary authorisation reference ( 29 )
Any identification ( *6 )
4 -
Destination - Direct delivery
Excise number ( 28 )
(Does not apply)
5 -
Destination - Exempted consignee
(Does not apply)
Any identification ( *6 )
6 -
Destination – Export
VAT number (optional)
(The data group <TRADER Place of Delivery> does not exist)
(see Code list 1 in Annex II to Regulation (EU) No 612/2013, if applicable)
an..16
b
Trader Name
C
IF <Destination Type Code> is “Destination - Direct delivery”
THEN <Trader Name> is ‘O’
ELSE <Trader Name> is ‘R’
an..182
2.7
OFFICE Place of Delivery - Customs
C
The optionality of the data groups <TRADER Place of Delivery> and <OFFICE Place of Delivery – Customs> are described in the table below, according to the <Destination Type Code>:
Destination Type Code
<TRADER Place of Delivery>
<OFFICE Place of Delivery – Customs>
1 -
Destination - Tax warehouse
‘R’
Does not apply
2 -
Destination - Registered consignee
‘O’
Does not apply
3 -
Destination - Temporary registered consignee
‘O’
Does not apply
4 -
Destination - Direct delivery
‘R’
Does not apply
5 -
Destination - Exempted consignee
‘O’
Does not apply
6 -
Destination – Export
Does not apply
‘R’
8 -
Unknown destination (consignee unknown)
Does not apply
Does not apply
a
Office Reference Number
R
(see Code list 5 in Annex II to Regulation (EC) No 684/2009)
an8
2.8
EXCISE PRODUCTS CATEGORY Code
R
9x
a
Excise Product Category Code
R
(see Code list 3 in Annex II to Regulation (EU) No 612/2013)
a1
2.9
TRADER Transport Arranger
C
IF <E-AD Header.Transport Arrangement>(IE801) (or <E-AD Header.Transport Arrangement>(IE815)) is “Consignor” or “consignee”
THEN <TRADER Transport Arranger> does not apply
ELSE <TRADER Transport Arranger> is ‘R’
a
VAT Number
O
an..14
b
Trader Name
R
an..182
2.10
TRADER First Transporter
O
a
VAT Number
O
an..14
b
Trader Name
R
an..182
Table 6
(as referred to in Article 5(3))
Refusal of Common Request
A
B
C
D
E
F
G
1
Common Request Message
R
The context of the Common Request message relating to the movement, the structure of which is set out in Table 4
2
Rejection
R
99x
a
Rejection Date and Time
R
dateTime
b
Rejection Reason Code
R
The possible values are:
0
=
Other
2
=
No e-AD(s) retrieved matching selection criteria
3
=
Reference data not available
4
=
Excise Office List not available
5
=
SEED data not available
7
=
Unknown requested data
8
=
Increment number out of range
26
=
Duplicate detected
112
=
Incorrect (code) value
115
=
Not supported in this position
n..3
Table 7
(as referred to in Article 6(1))
Administrative Cooperation Common Request
A
B
C
D
E
F
G
1
ATTRIBUTES
R
a
Request Type
R
The possible values are:
1
=
Administrative cooperation
2
=
Request for history
n1
b
Deadline for Results
R
date
2
FOLLOW UP
R
a
Follow-Up Correlation ID
R
(see Code list 1 in Annex II)
an28
b
Date of Issuance
R
date
c
Sender Member State Code
R
A Member State identified by a Member State Code in Code list 3 of Annex II to Regulation (EC) No 684/2009
a2
d
Sender Office Reference Number
O
(see Code list 5 in Annex II to Regulation (EC) No 684/2009)
an8
e
Sender Officer
O
an..35
f
Addressee Member State Code
R
A Member State identified by a Member State Code in Code list 3 of Annex II to Regulation (EC) No 684/2009
a2
g
Addressee Office Reference Number
O
(see Code list 5 in Annex II to Regulation (EC) No 684/2009)
an8
h
Addressee Officer
O
an..35
i
National Case Reference Identifier
O
an..99
3
ACO_REQUEST
C
—
‘R’ if <Request Type> is ‘1’
—
Does not apply otherwise
(see Request Type in box 1a)
a
Administrative Cooperation Request Information
R
an..999
b
Administrative Cooperation Request Information_LNG
R
Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group
a2
c
Flag
O
The possible values are:
0
=
No or False
1
=
Yes or True
n1
3.1
REQUEST REASON Code
R
99x
a
Administrative Cooperation Request Reason Code
R
(see Code list 8 in Annex II)
n..2
b
ACO_Complementary Information
C
—
‘R’ if <Administrative Cooperation Request Reason Code> is ‘Other’
—
‘O’ otherwise
an..999
c
ACO_Complementary Information_LNG
C
—
‘R’ if the corresponding text field(s) is(are) used
—
Does not apply otherwise
Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group
a2
3.1.1
RISK ASSESSMENT REFERENCE
O
99x
a
Other Risk Profile
O
an..999
b
Other Risk Profile_LNG
C
—
‘R’ if the corresponding text field(s) is(are) used
—
Does not apply otherwise
Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group
a2
3.2
ARC List
O
99x
a
ARC
R
(see Code list 2 in Annex II to Regulation (EC) No 684/2009)
an21
b
Sequence Number
O
The value of the Data Item must be greater than zero.
n..2
3.3
TRADER Person
O
99x
a
Trader Excise Number
C
For 3.3 a , b , and c : at least one of the following attributes must be present:
—
<Trader Excise Number>
—
<VAT Number>
—
<Trader Name>
An existing identifier (Excise Number) <Trader Excise Number> in the set of <TRADER AUTHORISATION> or <Temporary Authorisation Reference> in the set of <TEMPORARY AUTHORISATION>.
(see Code list 1 and Code list 2 in Annex II to Regulation (EU) No 612/2013)
an13
b
VAT Number
C
an..14
c
Trader Name
C
an..182
d
Member State Code
C
—
‘R’ if <Trader Name> is given and <Trader Excise Number> is not given and <VAT Number> is not given
—
Does not apply otherwise
(see Trader Excise Number in box 3.3a, VAT Number in box 3.3b, Trader Name in box 3.3c)
A Member State identified by a Member State Code in Code list 3 of Annex II to Regulation (EC) No 684/2009
a2
e
Street Name
O
an..65
f
Street Number
O
an..11
g
Postcode
O
an..10
h
City
O
an..50
i
NAD_LNG
C
—
‘R’ if the corresponding text field(s) is(are) used
—
Does not apply otherwise
Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group
a2
j
Phone Number
O
an..35
k
Fax Number
O
an..35
l
Email Address
O
an..70
3.4
SUPPORTING DOCUMENTS
O
9x
a
Short Description of Supporting Document
C
—
‘R’ if <Supporting Document Type> is “Other”
—
Doesn't apply otherwise
(see Reference of Supporting Document in box 3.4c and Image of Document in box 3.4e)
an..999
b
Short Description of Supporting Document_LNG
C
—
‘R’ if the corresponding text field(s) is(are) used
—
Does not apply otherwise
Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group
a2
c
Reference of Supporting Document
C
At least one, among these three fields:
—
<Supporting Document Type>
—
<Reference of Supporting Document>
—
<Image of Document>
(see Short Description of Supporting Document in box 3.4a and Image of Document in box 3.4e)
an..999
d
Reference of Supporting Document_LNG
C
—
‘R’ if the corresponding text field(s) is(are) used
—
Does not apply otherwise
Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group
a2
e
Image of Document
C
At least one, among these three fields:
—
<Supporting Document Type>
—
<Reference of Supporting Document>
—
<Image of Document>
(see Short Description of Supporting Document in box 3.4a and Reference of Supporting Document in box 3.4c)
f
Supporting Document Type
C
At least one, among these three fields:
—
<Supporting Document Type>
—
<Reference of Supporting Document>
—
<Image of Document>
See Reference of Supporting Document in box 3.4c and Image of Document in box 3.4e
(see code list 15 in Annex II)
n..2
3.5
ACTIONS Requested
O
99x
a
Administrative Cooperation Action Code
R
(see Code list 9 in Annex II)
n..2
b
ACO Action Complement
C
—
‘R’ if <Administrative Cooperation Action Code> is ‘Other’
—
‘O’ otherwise
(see Administrative Cooperation Action Code in box 3.5a)
an..999
c
ACO Action Complement_LNG
C
—
‘R’ if the corresponding text field(s) is(are) used
—
Does not apply otherwise
Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group
a2
4
HISTORY REQUEST
C
—
‘R’ if <Request Type> is ‘2’
—
Does not apply otherwise
(see Request Type in box 1a)
a
ARC
R
(see Code list 2 in Annex II to Regulation (EC) No 684/2009)
an21
b
History Request Scope Type
R
The possible values are:
1
=
Applicable data at a given date set by the <Scope Date>
2
=
History of data since a given date set by the <Scope Date>
3
=
Complete history of data
(see Scope Date in box 4c)
n1
c
Scope Date
C
—
Does not apply if <History Request Scope Type> is ‘3’
—
‘R’ otherwise
(see History Request Scope Type in box 4b)
date
d
History Request Reason
R
an..999
e
History Request Reason_LNG
R
Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group
a2
5
CONTACT
O
a
Office Reference Number
R
(see Code list 5 in Annex II to Regulation (EC) No 684/2009)
an8
b
Submitting Excise Officer
O
an..35
c
Tel. Number
O
an..35
d
Fax Number
O
an..35
e
Email Address
O
an..70
Table 8
(as referred to in Article 7(2) and Article 8)
Answer message
A
B
C
D
E
F
G
1
ATTRIBUTES
R
a
Message Type
R
The possible values are:
1
=
Administrative Cooperation answer message
2
=
History answer message
n1
2
FOLLOW UP
R
a
Follow Up Correlation ID
R
(see Code list 1 in Annex II)
an28
b
Date of Issuance
R
date
c
Sender Member State Code
R
A Member State identified by a Member State Code in Code list 3 of Annex II to Regulation (EC) No 684/2009
a2
d
Sender Office Reference Number
O
(see Code list 5 in Annex II to Regulation (EC) No 684/2009)
an8
e
Sender Officer
O
an..35
f
Addressee Member State Code
R
A Member State identified by a Member State Code in Code list 3 of Annex II to Regulation (EC) No 684/2009
a2
g
Addressee Office Reference Number
O
(see Code list 5 in Annex II to Regulation (EC) No 684/2009)
an8
h
Addressee Officer
O
an..35
i
National Case Reference Identifier
C
—
‘O’ If <Follow Up Correlation ID> does not match with <Follow Up Correlation ID> in a request message
—
“R” If <Follow Up Correlation ID> matches with <Follow Up Correlation ID> in a request message AND
<National Case Reference Identifier> is present in the request message
IF <Follow Up Correlation ID> matches with <Follow Up Correlation ID> in a request message AND <National Case Reference Identifier> is present in the request message
THEN
<National Case Reference Identifier> must be equal to the value of <National Case Reference Identifier> in the request message.
an..99
3
ANSWER
R
a
Deadline for Results
C
For 3 a and b:
—
‘R’ if < Refusal Reason Code> is provided
—
Does not apply otherwise
(see Refusal Reason Code in box 3c)
dateTime
b
Delayed Result Reason Code
C
(see Code list 3 in Annex II)
n..2
c
Refusal Reason Code
O
(see Code list 4 in Annex II)
n..2
d
Refusal Reason Complement
C
—
‘R’ if < Refusal Reason Code> is ‘Other’
—
Does not apply otherwise
(see Refusal Reason Code in box 3c)
an..999
e
Refusal Reason Complement_LNG
C
—
‘R’ if the corresponding text field(s) is(are) used
—
Does not apply otherwise
Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group
a2
Table 9
(as referred to in Article 7(1))
Reminder Message for Administrative Cooperation
A
B
C
D
E
F
G
1
ATTRIBUTES
R
a
Message Type
R
The possible values are:
1
=
Administrative cooperation results reminder message
2
=
History results reminder message
n1
2
FOLLOW UP
R
a
Follow Up Correlation ID
R
(see Code list 1 in Annex II)
an28
b
Date of Issuance
R
date
c
Sender Member State Code
R
A Member State identified by a Member State Code in Code list 3 of Annex II to Regulation (EC) No 684/2009
a2
d
Sender Office Reference Number
O
(see Code list 5 in Annex II to Regulation (EC) No 684/2009)
an8
e
Sender Officer
O
an..35
f
Addressee Member State Code
R
A Member State identified by a Member State Code in Code list 3 of Annex II to Regulation (EC) No 684/2009
a2
g
Addressee Office Reference Number
O
(see Code list 5 in Annex II to Regulation (EC) No 684/2009)
an8
h
Addressee Officer
O
an..35
i
National Case Reference Identifier
C
—
‘O’ If <Follow Up Correlation ID> does not match with <Follow Up Correlation ID> in a request message
—
“R” If <Follow Up Correlation ID> matches with <Follow Up Correlation ID> in a request message AND
<National Case Reference Identifier> is present in the request message
—
Otherwise it does not apply.
IF <Follow Up Correlation ID> matches with <Follow Up Correlation ID> in a request message AND <National Case Reference Identifier> is present in the request message
THEN
<National Case Reference Identifier> must be equal to the value of <National Case Reference Identifier> in the request message.
an..99
Table 10
(as referred to in Article 6(3), Article 9(1) and Articles 10 and 16)
Administrative Cooperation Results
A
B
C
D
E
F
G
1
FOLLOW UP
R
a
Follow Up Correlation ID
R
(see Code list 1 in Annex II)
an28
b
Date of Issuance
R
date
c
Sender Member State Code
R
A Member State identified by a Member State Code in Code list 3 of Annex II to Regulation (EC) No 684/2009
a2
d
Sender Office Reference Number
O
(see Code list 5 in Annex II to Regulation (EC) No 684/2009)
an8
e
Sender Officer
O
an..35
f
Addressee Member State Code
R
A Member State identified by a Member State Code in Code list 3 of Annex II to Regulation (EC) No 684/2009
a2
g
Addressee Office Reference Number
O
(see Code list 5 in Annex II to Regulation (EC) No 684/2009)
an8
h
Addressee Officer
O
an..35
i
National Case Reference Identifier
C
—
‘O’ If <Follow Up Correlation ID> does not match with <Follow Up Correlation ID> in a request message
—
“R” If <Follow Up Correlation ID> matches with <Follow Up Correlation ID> in a request message AND
<National Case Reference Identifier> is present in the request message
—
Otherwise it does not apply.
IF <Follow Up Correlation ID> matches with <Follow Up Correlation ID> in a request message AND <National Case Reference Identifier> is present in the request message
THEN
<National Case Reference Identifier> must be equal to the value of <National Case Reference Identifier> in the request message.
an..99
2
CONTACT
O
a
Office Reference Number
R
(see Code list 5 in Annex II to Regulation (EC) No 684/2009)
an8
b
Submitting Excise Officer
O
an..35
c
Tel. Number
O
an..35
d
Fax Number
O
an..35
e
Email Address
O
an..70
3
ACO_ACTION RESULT
O
99x
a
ARC
O
(see Code list 2 in Annex II to Regulation (EC) No 684/2009)
an21
b
Sequence Number
C
—
‘O’ if <ARC> is present
—
Does not apply otherwise
(see ARC in box 3a)
The value of the Data Item must be greater than zero.
n..2
c
Administrative Cooperation Action Code
R
(see Code list 9 in Annex II)
n..2
d
ACO Action Complement
C
—
‘R’ if <Administrative Cooperation Action Code> is ‘Other’
—
‘O’ otherwise
(see Administrative Cooperation Action Code in box 3c)
an..999
e
ACO Action Complement_LNG
C
—
‘R’ if the corresponding text field(s) is(are) used
—
Does not apply otherwise
Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group
a2
f
ACO Action Not Possible Reason Code
O
(see Code list 11 in Annex II)
n..2
g
ACO Action Not Possible Reason Complement
C
—
‘R’ if <ACO Action Not Possible Reason Code> is ‘Other’
—
‘O’ otherwise
(see ACO Action Not Possible Reason Code in box 3f)
an..999
h
ACO Action Not Possible Reason Complement_LNG
C
—
‘R’ if the corresponding text field(s) is(are) used
—
Does not apply otherwise
Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group
a2
i
Finding at Destination
O
The possible values are:
0
=
Other finding
1
=
(reserved)
2
=
Consignment in order
3
=
Consignment has not reached destination
4
=
Consignment arrived late
5
=
Shortage detected
6
=
Excise products not in order
7
=
Consignment not entered in stock records
8
=
Trader could not be contacted
9
=
Missing trader
10
=
Excess detected
11
=
Wrong EPC
12
=
Wrong destination type code
13
=
Differences confirmed
14
=
Manual closing recommended
15
=
Interruption recommended
16
=
Irregularities Found
n..2
j
Other Finding Type
C
—
‘R’ if <Finding at Destination> is ‘Other finding’
—
Does not apply otherwise
(see Finding at Destination in box 3i)
an..999
k
Other Finding Type_LNG
C
—
‘R’ if the corresponding text field(s) is(are) used
—
Does not apply otherwise
Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group
a2
l
Complementary Explanations
O
an..999
m
Complementary Explanations_LNG
C
—
‘R’ if the corresponding text field(s) is(are) used
—
Does not apply otherwise
Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group
a2
n
Control Report Reference
O
(see Code list 2 in Annex II)
A ‘Control Report’ message exists in the system (including the case that it is encapsulated in a received ‘Movement History’/‘History results’ message) having the same <Control Report Reference> with that of the submitted message. In addition if the <ARC> is provided in the submitted message then it coincides with the <ARC> of the referenced ‘Control Report’ message
(see ARC in box 3a)
an16
4
FEEDBACK REQUEST
O
a
Feedback Requested or Provided
R
The possible values are:
0
=
No feedback requested
1
=
Feedback requested
2
=
Feedback provided
n1
b
Follow Up Actions
C
At least one among these two fields if box 4a is given:
—
<Follow Up Actions>
—
<Relevance of Information>
an..999
c
Follow Up Actions_LNG
C
—
‘R’ if the corresponding text field(s) is (are) used
—
Does not apply otherwise
Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group
a2
d
Relevance of Information Provided
C
At least one among these two fields if box 4a is given:
—
< Follow Up Actions>
—
<Relevance of Information>
an..999
e
Relevance of Information_LNG
C
—
‘R’ if the corresponding text field(s) is (are) used
—
Does not apply otherwise
Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group
a2
5
SUPPORTING DOCUMENTS
O
9x
a
Short Description of Supporting Document
C
—
‘R’ if <Supporting Document Type> is “Other”
—
Doesn't apply otherwise
(See Supporting Document Type in box 5f)
an..999
b
Short Description of Supporting Document_LNG
C
—
‘R’ if the corresponding text field(s) is(are) used
—
Does not apply otherwise
Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group
a2
c
Reference of Supporting Document
C
At least one, among these three fields:
—
<Short Description of Supporting Document>
—
<Reference of Supporting Document>
—
<Image of Document>
(see Short Description of Supporting Document in box.5a and Image of Document in box 5e)
an..999
d
Reference of Supporting Document_LNG
C
—
‘R’ if the corresponding text field(s) is(are) used
—
Does not apply otherwise
Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group
a2
e
Image of Document
C
At least one, among these three fields:
—
<Short Description of Supporting Document>
—
<Reference of Supporting Document>
—
<Image of Document>
(see Short Description of Supporting Document in box 5a and Reference of Supporting Document in box 5c)
f
Supporting Document Type
C
At least one, among these three fields:
—
<Short Description of Supporting Document>
—
<Reference of Supporting Document>
—
<Image of Document>
(see Short Description of Supporting Document in box 5a, Reference of Supporting Document in box 5c and Image of Document in box5e)
(see code list 15 in Annex II)
n..2
Table 11
(as referred to in Article 9(2) and Article 11)
Control Report
A
B
C
D
E
F
G
1
ATTRIBUTES
R
a
Message Type
R
The possible values are:
1
=
Validated document
n1
b
Date and Time of Validation of Control Report
C
—
‘R’ after successful validation
—
Does not apply otherwise
dateTime
2
CONTROL REPORT HEADER
R
a
Control Report Reference
R
(see Code list 2 in Annex II)
an16
2.1
CONTROL OFFICE
R
a
Control Office Reference Number
O
(see Code list 5 in Annex II to Regulation (EC) No 684/2009)
an8
b
Member State Code
C
For 2.1 b , c , d , e , f , and g :
—
‘R’ except for <Street Number>, which is ‘O’, if <Control Office Reference Number> is not given
—
Does not apply otherwise
(see Control Office Reference Number in box 2.1a)
A Member State identified by a Member State Code in Code list 3 of Annex II to Regulation (EC) No 684/2009
a2
c
Control Office Name
C
an..35
d
Street Name
C
an..65
e
Street Number
C
an..11
f
Postcode
C
an..10
g
City
C
an..50
h
Phone Number
C
For 2.1 h , i and j :
If <Control Office Reference Number> is not given, at least one of the following three attributes must be present:
—
<Phone Number>
—
<Fax Number>
—
<Email Address>
—
otherwise, none of the three attributes are applicable
(see Control Office Reference Number in box 2.1a)
an..35
i
Fax Number
C
an..35
j
Email Address
C
an..70
k
NAD_LNG
C
‘R’ if the corresponding free text field(s) is (are) used
Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group
a2
3
EXCISE MOVEMENT e-AD
C
One of the <EXCISE MOVEMENT e-AD> or <OTHER ACCOMPANYING DOCUMENT> data groups must be present
a
ARC
R
(see Code list 2 in Annex II to Regulation (EC) No 684/2009)
an21
b
Sequence Number
R
The value of the Data Item must be greater than zero.
n..2
4
OTHER ACCOMPANYING DOCUMENT
C
One of the <EXCISE MOVEMENT e-AD> or <OTHER ACCOMPANYING DOCUMENT> data groups must be present
a
Other Accompanying Document Type
R
The possible values are:
0
=
Other
1
=
SAAD
n1
b
Short Description of Other Accompanying Document
C
‘R’ if Other Accompanying Document Type> is “Other”
It doesn't apply otherwise
an…350
c
Short Description of Other Accompanying Document_LNG
C
—
‘R’ if the corresponding text field(s) is (are) used
Does not apply otherwise
Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group
n2
d
Other Accompanying Document Number
R
an…350
e
Other Accompanying Document Date
R
date
f
Image of Other Accompanying Document
O
g
Member State of Dispatch
R
A Member State identified by a Member State Code in Code list 3 of Annex II to Regulation (EC) No 684/2009
a2
h
Member State of Destination
R
A Member State identified by a Member State Code in Code list 3 of Annex II to Regulation (EC) No 684/2009
a2
4.1
TRADER Person Involved in Movement
O
9x
a
Trader Excise Number
C
At least one of the following attributes must be present:
—
<Trader Excise Number>
—
<Trader Identification>
—
<Trader Name>
An existing identifier (Excise Number) <Trader Excise Number> in the set of <TRADER AUTHORISATION> or <Temporary Authorisation Reference> in the set of <TEMPORARY AUTHORISATION>
(see Code list 1 in Annex II to Regulation (EU) No 612/2013)
an13
b
Trader Identification
C
At least one of the following attributes must be present:
—
<Trader Excise Number>
—
<Trader Identification>
—
<Trader Name>
A VAT number or any other National number
an16
c
Trader Name
C
At least one of the following attributes must be present:
—
<Trader Excise Number>
—
<Trader Identification>
—
<Trader Name>
an..182
d
Trader Person Type
O
The possible values are the following:
1
=
Consignor
2
=
Consignee
3
=
Tax representative
4
=
Vendor
5
=
Liable person
6
=
Customer private individual
n..2
e
Member State Code
C
‘R’ if <Trader Name> is given AND <Trader Excise Number> and <Trader Identification> is not given.
It doesn't apply otherwise
(see Code list 3 in Annex II to Regulation (EC) No 684/2009)
a2
f
Street Name
O
an..65
g
Street Number
O
an..11
h
Postcode
O
an..10
i
City
O
an..50
j
NAD_LNG
C
—
‘R’ if the corresponding text field(s) is (are) used
—
Does not apply otherwise
Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group
a2
k
Phone Number
O
an..35
m
Email Address
O
an..70
4.2
GOODS ITEM
O
999x
a
Description of the Goods
O
an..55
b
CN Code
C
—
‘R’ if <OTHER ACCOMPANYING DOCUMENT.Image of Other Accompanying Document> is not present in at least one instance of the <OTHER ACCOMPANYING DOCUMENT> data group
—
Does not apply otherwise
(see box4 and 4f)
The value of the Data Item must be greater than zero.
n8
c
Commercial Description of the Goods
O
an..999
d
Additional code
O
an..35
e
Quantity
C
—
‘R’ if <OTHER ACCOMPANYING DOCUMENT.Image of Other Accompanying Document> is not present in at least one instance of the <OTHER ACCOMPANYING DOCUMENT> data group
—
Does not apply otherwise
(see box4 and 4f)
The value of the Data Item must be greater than zero.
n..15,3
f
Unit of Measure Code
C
—
‘R’ if <OTHER ACCOMPANYING DOCUMENT.Image of Other Accompanying Document> is not present in at least one instance of the <OTHER ACCOMPANYING DOCUMENT> data group
—
Does not apply otherwise
(see box4 and 4f)
(See Annex II to Regulation (EC) No 684/2009, Code list 12)
n..2
g
Gross Weight
O
The Gross Weight must be equal to or higher than Net Weight.
The value of the Data Item must be greater than zero.
n..15,2
h
Net Weight
O
The Gross Weight must be equal to or higher than Net Weight.
The value of the Data Item must be greater than zero.
n..15,2
5
MEANS OF TRANSPORT
C
—
‘R’ if <OTHER ACCOMPANYING DOCUMENT.Image of Other Accompanying Document> is not present in at least one instance of the <OTHER ACCOMPANYING DOCUMENT> data group
—
Does not apply otherwise
(see box4 and 4f)
a
Trader Name
R
an..182
b
Street Name
R
an..65
c
Street Number
O
an..11
d
Transporter Country
R
Provide a ‘Country Code’ listed in Code list 4 of Annex II to Regulation (EC) No 684/2009, but not listed in Code list 3 of Annex II to Regulation (EC) No 684/2009 and except ‘Country Code’‘GR’.
a2
e
Postcode
R
an..10
f
City
R
an..50
g
Transport Mode Code
R
Provide the mode of transport using the codes in Code list 7 of Annex II to Regulation (EC) No 684/2009
n..2
h
ACO_Complementary Information
C
—
‘R’ if <MEANS OF TRANSPORT. Transport Mode Code> is “Other”
—
Does not apply otherwise
(see box5g)
an..999
i
ACO_Complementary Information_LNG
C
—
‘R’ if the corresponding text field(s) is (are) used
—
Does not apply otherwise
Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group
a2
j
Registration
R
an..35
k
Country of Registration
R
Provide a ‘Country Code’ listed in Code list 4 of Annex II to Regulation (EC) No 684/2009, but not listed in Code list 3 of Annex II to Regulation (EC) No 684/2009 and except ‘Country Code’‘GR’.
a2
6
CONTROL REPORT
R
a
Date of Control
R
date
b
Place of Control
R
an..350
c
Place of Control_LNG
R
Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group
a2
d
Control Type
R
The possible values are:
1
=
Physical control
2
=
Documentary control
n1
e
Reason for Control
R
The possible values are:
0
=
Other reason
1
=
Control started at random
2
=
Event signalled
3
=
Request for assistance received
4
=
Request from another office
5
=
Alert received
n1
f
Complementary Origin Reference
O
an..350
g
Complementary Origin Reference_LNG
C
—
‘R’ if the corresponding text field is used
—
Does not apply otherwise
Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group
a2
h
Control Officer Identity
R
an..350
i
Control Officer Identity_LNG
R
Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group
a2
j
Global Control Conclusion
R
The possible values are:
1
=
Satisfactory
2
=
Minor discrepancies found
3
=
Interruption recommended
4
=
Intention to make claim under Article 10 of Council Directive 2008/118/EC
5
=
Allowable loss detected, in relation to Article 7(4) of Council Directive 2008/118/EC
n1
k
Control at Arrival Required
R
The possible values are:
0
=
No or False
1
=
Yes or True
n1
l
Flag
R
The possible values are:
0
=
No or False
1
=
Yes or True
n1
m
Comments
O
an..350
n
Comments_LNG
C
—
‘R’ if the corresponding text field(s) is(are) used
—
Does not apply otherwise
Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group
a2
6.1
PERFORMED CONTROL ACTION
R
99x
a
Performed Control Action
R
The possible values are:
0
=
Other control action
1
=
Verified counted packs
2
=
Unloaded
3
=
Opened packs
4
=
Annotated paper copy of documents (e.g. SAAD)
5
=
Counting
6
=
Sampling
7
=
Administrative control
8
=
Goods weighted/measured
9
=
Random check
10
=
Control of records
11
=
Compare documents presented with e-AD
n..2
b
Other Control Action
C
—
‘R’ if <Performed Control Action> is ‘0’
—
Does not apply otherwise
(see Performed Control Action in box 6.1a)
an..350
c
Other Control Action_LNG
C
—
‘R’ if the corresponding text field(s) is(are) used
—
Does not apply otherwise
Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group
a2
6.2
EVIDENCE OF EVENT
C
—
‘R’ if <Reason for Control> is ‘2’
—
Does not apply otherwise
(see Reason for Control in box 6e)
9x
a
Issuing Authority
O
an..35
b
Issuing Authority_LNG
C
—
‘R’ if the corresponding text field(s) is(are) used
—
Does not apply otherwise
Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group
a2
c
Evidence Type Code
R
(see Code list 6 in Annex II)
n..2
d
Evidence Type Complement
C
—
‘R’ if <Evidence Type Code> is ‘Other’
—
Does not apply otherwise
(see Evidence Type Code in box 3.2c)
an..350
e
Evidence Type Complement_LNG
C
—
‘R’ if the corresponding text field(s) is(are) used
—
Does not apply otherwise
Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group
a2
f
Reference of Evidence
O
an..350
g
Reference of Evidence_LNG
C
—
‘R’ if the corresponding text(s) field is(are) used
—
Does not apply otherwise
Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group
a2
h
Image of Evidence
O
6.3
UNSATISFACTORY REASON
O
9x
a
Unsatisfactory Reason Code
R
(see Code list 12 in Annex II)
n..2
b
Complementary Information
C
—
‘R’ if <Unsatisfactory Reason Code> is ‘Other’
—
Does not apply otherwise
(see Unsatisfactory Reason Code in box 6.3a)
an..350
c
Complementary Information_LNG
C
—
‘R’ if the corresponding text field(s) is(are) used
—
Does not apply otherwise
Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group
a2
6.4
TRANSPORT DETAILS
O
99x
a
Transport Unit Code
R
(see Code list 7 in Annex II to Regulation (EC) No 684/2009)
n..2
b
Identity of Transport Units
C
—
‘R’ if <Transport Unit Code> is not ‘Fixed transport installations’
—
Does not apply otherwise
(see Transport Unit Code in box 6.4a)
an..35
c
Identity of Commercial Seal
O
an..35
d
Seal Information
O
an..350
e
Seal Information_LNG
C
—
‘R’ if the corresponding text field(s) is(are) used
—
Does not apply otherwise
Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group
a2
f
Complementary Information
O
an..350
g
Complementary Information_LNG
C
—
‘R’ if the corresponding text field(s) is(are) used
—
Does not apply otherwise
Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group
a2
6.5
CONTROL REPORT Body
O
99x
a
Body Record Unique Reference
C
—
‘R’ if <EXCISE MOVEMENT e-AD> data group is present
—
Does not apply otherwise
This value refers to the <Body Record Unique Reference> of the e-AD Body of the associated e-AD and must be unique within the message.
The value of the Data Item must be greater than zero.
n..3
b
Description of the Goods
C
—
‘O’ if the <OTHER ACCOMPANYING DOCUMENT> data group is present
—
Does not apply otherwise
an..55
c
CN Code
C
—
‘R’ if the <OTHER ACCOMPANYING DOCUMENT> data group is present
—
Does not apply otherwise
The value of the Data Item must be greater than zero.
n8
d
Additional code
C
—
‘O’ if the <OTHER ACCOMPANYING DOCUMENT> data group is present
—
Does not apply otherwise
an..35
e
Indicator of Shortage or Excess
O
The possible values are:
S
=
Shortage
E
=
Excess
a1
f
Observed Shortage or Excess
C
—
‘R’ if <Indicator of Shortage or Excess> is given
—
Does not apply otherwise
(see Indicator of Shortage or Excess in box 6.5e)
The value of the Data Item must be greater than zero.
n..15,3
g
Comments
O
an..350
h
Comments_LNG
C
—
‘R’ if the corresponding text field(s) is(are) used
—
Does not apply otherwise
Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group
a2
6.5.1
UNSATISFACTORY REASON
O
9x
a
Unsatisfactory Reason Code
R
(see Code list 12 in Annex II)
n..2
b
Complementary Information
C
—
‘R’ if <Unsatisfactory Reason Code> is ‘Other’
—
‘O’ otherwise
(see Indicator of Unsatisfactory Reason Code in box 3.5.1a)
an..350
c
Complementary Information_LNG
C
—
‘R’ if the corresponding text field(s) is(are) used
—
Does not apply otherwise
Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group
a2
Table 12
(as referred to in Article 14)
Event Report
A
B
C
D
E
F
G
1
ATTRIBUTES
R
a
Message Type
R
The possible values are:
1
=
Initial submission
3
=
Validated document
n1
b
Date and Time of Validation of Event Report
C
—
‘R’ after successful validation,
—
Does not apply otherwise
dateTime
2
EVENT REPORT HEADER
R
a
Event Report Number
C
—
‘R’ if <Message Type> is ‘3’
—
Does not apply otherwise
(see Message Type in box 1a)
(see Code list 2 in Annex II)
an16
b
MS of Submission Event Report Reference
C
—
‘R’ if <Message Type> is ‘1’ or ‘3’ and the MS of submission is different from the MS of event
—
‘O’ if <Message Type> is ‘1’ or ‘3’ and the MS of submission is the MS of event
—
Does not apply otherwise
(see Message Type in box 1a)
The format of <MS of Submission Event Report Reference> is:
—
2 alphabetic characters: Identifier of the Member State of Submission of the event report
—
followed by a nationally assigned, unique code
an..35
c
ARC
R
(see Code list 2 in Annex II to Regulation (EC) No 684/2009)
an21
d
Sequence Number
R
The value of the data element must be greater than zero.
n..2
3
OTHER ACCOMPANYING DOCUMENT
C
One of the One of the <EXCISE MOVEMENT e-AD> or <OTHER ACCOMPANYING DOCUMENT> data groups must be present
a
Other Accompanying Document Type
R
The possible values are:
0
=
Other
1
=
SAAD
n1
b
Short Description of Other Accompanying Document
C
—
‘R’ if Other Accompanying Document Type> is “Other”
—
It doesn't apply otherwise
an..350
c
Short Description of Other Accompanying Document_LNG
C
—
‘R’ if the corresponding text field(s) is (are) used
—
Does not apply otherwise
a2
d
Other Accompanying Document Number
R
an..350
e
Other Accompanying Document Date
R
date
f
Image of Other Accompanying Document
O
g
Member State of Dispatch
R
A Member State identified by a Member State Code in Code list 3 of Annex II to Regulation (EC) No 684/2009
a2
h
Member State of Destination
R
A Member State identified by a Member State Code in Code list 3 of Annex II to Regulation (EC) No 684/2009
a2
3.1
TRADER Person Involved in Movement
O
9x
a
Trader Excise Number
C
—
At least one of the following attributes must be present:
—
<Trader Excise Number>
—
<Trader Identification>
—
<Trader Name>
An existing identifier (Excise Number) <Trader Excise Number> in the set of <TRADER AUTHORISATION> or <Temporary Authorisation Reference> in the set of <TEMPORARY AUTHORISATION>
(see Code list 1 in Annex II to Regulation (EU) No 612/2013)
an13
b
Trader Identification
C
—
At least one of the following attributes must be present:
—
<Trader Excise Number>
—
<Trader Identification>
—
<Trader Name>
A VAT number or any other National number
an16
c
Trader Name
C
—
At least one of the following attributes must be present:
—
<Trader Excise Number>
—
<Trader Identification>
—
<Trader Name>
an..182
d
Trader Person Type
O
The possible values are the following:
1
=
Consignor
2
=
Consignee
3
=
Tax representative
4
=
Vendor
5
=
Liable person
6
=
Customer private individual
n..2
e
Member State Code
C
—
‘R’ if <Trader Name> is given AND <Trader Excise Number> and <Trader Identification> is not given.
—
It doesn't apply otherwise
(see Code list 3 in Annex II to Regulation (EC) No 684/2009)
a2
f
Street Name
O
an..65
g
Street Number
O
an..11
h
Postcode
O
an..10
j
NAD_LNG
C
—
‘R’ if the corresponding text field(s) is (are) used
—
Does not apply otherwise
Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group
a2
k
Phone Number
O
an..35
l
Fax Number
O
an..35
m
Email Address
O
an..70
3.2
GOODS ITEM
O
999x
a
Description of the Goods
O
an..55
b
CN Code
C
—
‘R’ if <OTHER ACCOMPANYING DOCUMENT. Image of Other Accompanying Document> is not present in at least one instance of the <OTHER ACCOMPANYING DOCUMENT> data group
—
Does not apply otherwise (see box 4 and 4f)
The value of the Data Item must be greater than zero.
n8
c
Commercial Description of the Goods
O
an..999
d
Additional code
O
an..35
e
Quantity
C
—
‘R’ if <OTHER ACCOMPANYING DOCUMENT.Image of Other Accompanying Document> is not present in at least one instance of the <OTHER ACCOMPANYING DOCUMENT> data group
—
Does not apply otherwise
(see box4 and 4f)
The value of the Data Item must be greater than zero.
n..15,3
f
Unit of Measure Code
C
—
‘R’ if <OTHER ACCOMPANYING DOCUMENT.Image of Other Accompanying Document> is not present in at least one instance of the <OTHER ACCOMPANYING DOCUMENT> data group
—
Does not apply otherwise
(see box4 and 4f)
(See Annex II to Regulation (EC) No 684/2009, Code list 12)
n..2
g
Gross Weight
O
The Gross Weight must be equal to or higher than Net Weight. The value of the Data Item must be greater than zero.
n..15,2
h
Net Weight
O
The Gross Weight must be equal to or higher than Net Weight. The value of the Data Item must be greater than zero.
n..15,2
4
MEANS OF TRANSPORT
C
—
‘R’ if <OTHER ACCOMPANYING DOCUMENT.Image of Other Accompanying Document> is not present in at least one instance of the <OTHER ACCOMPANYING DOCUMENT> data group
—
Does not apply otherwise
(see box4 and 4f)
a
Trader Name
R
an..182
b
Street Name
R
an..65
c
Street Number
O
an..11
d
Transporter Country
R
Provide a ‘Country Code’ listed in Code list 4 of Annex II to Regulation (EC) No 684/2009, but not listed in Code list 3 of Annex II to Regulation (EC) No 684/2009 and except ‘Country Code’‘GR’.
a2
e
Postcode
R
an..10
f
City
R
an..50
g
Transport Mode Code
R
Provide the mode of transport using the codes in Code list 7 of Annex II to Regulation (EC) No 684/2009
n..2
h
ACO_Complementary Information
C
—
‘R’ if <MEANS OF TRANSPORT.Transport Mode Code> is “Other”
—
Does not apply otherwise
(see box 4g)
an..999
i
ACO_Complementary Information_LNG
C
—
‘R’ if the corresponding text field(s) is (are) used
—
Does not apply otherwise
Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group
a2
j
Registration
R
an..35
k
Country of Registration
R
Provide a ‘Country Code’ listed in Code list 4 of Annex II to Regulation (EC) No 684/2009, but not listed in Code list 3 of Annex II to Regulation (EC) No 684/2009 and except ‘Country Code’‘GR’.
a2
5
EVENT REPORT
C
—
‘R’ if <Message Type> is ‘1’ or ‘3’
—
‘O’ otherwise
(see Message Type in box 1a)
a
Date of Event
R
date
b
Place of Event
R
an..350
c
Place of Event_LNG
C
—
‘R’ if the corresponding text field is used
—
Does not apply otherwise
Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group
a2
d
Excise Officer Identification
O
an..35
e
Submitting Person
R
an..35
f
Submitting Person Code
R
(see Code list 10 in Annex II)
n..2
g
Submitting Person Complement
C
—
‘R’ if <Submitting Person Code> is ‘Other’
—
‘O’ otherwise
(see Submitting Person Code in box 5f)
an..350
h
Submitting Person Complement_LNG
C
—
‘R’ if the corresponding text field(s) is(are) used
—
Does not apply otherwise
Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group
a2
i
Changed Transport Arrangement
O
The possible values are:
1
=
Consignor
2
=
Consignee
3
=
Owner of goods
4
=
Other
n1
j
Comments
O
an..350
k
Comments_LNG
C
—
‘R’ if the corresponding text field(s) is(are) used
—
Does not apply otherwise
Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group
a2
6
EVIDENCE OF EVENT
O
9x
a
Issuing Authority
O
an..35
b
Issuing Authority_LNG
C
—
‘R’ if the corresponding text field(s) is(are) used
—
Does not apply otherwise
Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group
a2
c
Evidence Type Code
R
(see Code list 6 in Annex II)
n..2
d
Evidence Type Complement
C
—
‘R’ <Evidence Type Code> is ‘Other’
—
Does not apply otherwise
(see Evidence Type Code in box 6c)
an..350
e
Evidence Type Complement_LNG
C
—
‘R’ if the corresponding text field(s) is(are) used
—
Does not apply otherwise
Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group
2
f
Reference of Evidence
R
an..350
g
Reference of Evidence_LNG
R
Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group
a2
h
Image of Evidence
O
7
TRADER New Transport Arranger
C
—
Does not apply if <Changed Transport Arrangement> is ‘1’, ‘2’, or is not used
—
‘R’ otherwise
(see Changed Transport Arrangement in box 5i)
a
VAT Number
O
an..14
b
Trader Name
R
an..182
c
Street Name
R
an..65
d
Street Number
O
an..11
e
Postcode
R
an..10
f
City
R
an..50
g
NAD_LNG
R
Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group
a2
8
TRADER New Transporter
O
a
VAT Number
O
an..14
b
Trader Name
R
an..182
c
Street Name
R
an..65
d
Street Number
O
an..11
e
Postcode
R
an..10
f
City
R
an..50
g
NAD_LNG
R
Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group
a2
9
TRANSPORT DETAILS
O
99x
a
Transport Unit Code
R
(see Code list 7 in Annex II to Regulation (EC) No 684/2009)
n..2
b
Identity of Transport Units
C
—
Does not apply if <Transport Unit Code> is ‘Fixed transport installations’.
—
‘R’ otherwise
(see Transport Unit Code in box 7a)
an..35
c
Identity of Commercial Seal
O
an..35
d
Seal Information
O
an..350
e
Seal Information_LNG
C
—
‘R’ if the corresponding text field(s) is(are) used
—
Does not apply otherwise
Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group
a2
f
Complementary Information
O
an..350
g
Complementary Information_LNG
C
—
‘R’ if the corresponding text field(s) is(are) used
—
Does not apply otherwise
Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group
a2
10
EVENT REPORT Body
C
—
‘O’ if <TRADER New Transport Arranger> is used, or <TRADER New Transporter> is used, or <TRANSPORT DETAILS> is used
—
‘R’ otherwise
(see TRADER New Transport Arranger in 7, TRADER New Transport in 8, and TRANSPORT DETAILS in 9)
99x
a
Event Type Code
R
(see Code list 14 in Annex II)
n..2
b
Associated Information
C
—
‘R’ if <Event Type Code> is ‘0’
—
‘O’ otherwise
(see Event Type Code in box 10a)
an..350
c
Associated Information_LNG
C
—
‘R’ if the corresponding text field(s) is(are) used
—
Does not apply otherwise
Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group
a2
d
Body Record Unique Reference
C
—
‘R’ if <EXCISE MOVEMENT e-AD> data group is present
—
Does not apply otherwise
This value refers to the <Body Record Unique Reference> of the e-AD Body of the associated e-AD and must be unique within the message
The value of the Data Item must be greater than zero.
n..3
e
Description of the Goods
C
—
‘O’ if the <OTHER ACCOMPANYING DOCUMENT> data group is present
—
Does not apply otherwise
an..55
f
CN Code
C
—
‘R’ if the <OTHER ACCOMPANYING DOCUMENT> data group is present
—
Does not apply otherwise
The value of the Data Item must be greater than zero.
n8
g
Additional code
C
—
‘O’ if the <OTHER ACCOMPANYING DOCUMENT> data group is present
—
Does not apply otherwise
an..35
h
Indicator of Shortage or Excess
C
For 10 e, f and g:
—
‘R’ if <Body Record Unique Reference> is given
—
Does not apply otherwise
(see Body Record Unique Reference in box 8d)
The possible values are:
S
=
Shortage
E
=
Excess
a1
i
Observed Shortage or Excess
C
The value of the Data Item must be greater than zero.
n..15,3
Table 13
(as referred to in Article 12)
Interruption of Movement
A
B
C
D
E
F
G
1
ATTRIBUTES
R
a
ARC
R
(see Code list 2 in Annex II to Regulation (EC) No 684/2009)
an21
b
Date and Time of Issuance
R
dateTime
c
Reason for Interruption Code
R
(see Code list 13 in Annex II)
n..2
d
Excise Office Reference Number
R
(see Code list 5 in Annex II to Regulation (EC) No 684/2009)
an8
e
Excise Officer Identification
O
an..35
f
Complementary Information
C
—
‘R’ if <Reason for Interruption Code> is ‘Other’
—
‘O’ otherwise
(see Reason for Interruption Code in box 1c)
an..350
g
Complementary Information_LNG
C
—
‘R’ if the corresponding text field(s) is(are) used
—
Does not apply otherwise
Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group
a2
2
CONTROL REPORT Reference
O
9x
a
Control Report Reference
R
(see Code list 2 in Annex II)
A ‘Control Report’ message exists in the system (including the case that it is encapsulated in a received ‘Movement History’ message) having the same <Control Report Reference> and <ARC> with that of the submitted message.
(see ARC in box 1a)
an16
3
EVENT REPORT Reference
O
9x
a
Event Report Number
R
(see Code list 2 in Annex II)
An ‘Event Report’ message exists in the system (including the case that it is encapsulated in a received ‘Movement History’ message) having the same <Event Report Number> and <ARC> with that of the submitted message
(see ARC in box 1a)
an16
Table 14
(as referred to in Article 13)
Alert or Rejection of an e-AD
A
B
C
D
E
F
G
1
ATTRIBUTES
R
a
Date and Time of Validation of Alert or Rejection
C
—
R if corresponding field is validated
—
Does not apply otherwise
dateTime
2
EXCISE MOVEMENT e-AD
R
a
ARC
R
Provide the ARC of the e-AD
(see Code list 2 in Annex II to Regulation (EC) No 684/2009)
an21
b
Sequence Number
R
The value of the data element must be greater than zero
n..2
3
TRADER Consignee
R
a
Trader Identification
C
—
‘R’ if <Destination Type Code> is in:
—
“Destination - Tax warehouse”
—
“Destination - Registered consignee”
—
“Destination - Temporary registered consignee”
—
“Destination - Direct delivery”
—
‘O’ if <Destination Type Code> is ‘Destination – Export’
—
Does not apply otherwise
The possible values of <Trader Identification> are described in the following table:
Destination Type Code
TRADER CONSIGNEE. Trader Identification
TRADER Place of Delivery. Trader Identification
1 -
Destination - Tax warehouse
Excise number ( 31 )
Tax Warehouse Reference (Excise Number) ( 35 )
2 -
Destination - Registered consignee
Excise number ( 32 )
Any identification ( *7 )
3 -
Destination - Temporary registered consignee
Temporary authorisation reference ( 34 )
Any identification ( *7 )
4 -
Destination - Direct delivery
Excise number ( 33 )
(Does not apply)
5 -
Destination - Exempted consignee
(Does not apply)
Any identification ( *7 )
6 -
Destination – Export
VAT number (optional)
(The data group <TRADER Place of Delivery> does not exist)
(see Code list 1 and Code list 2 in Annex II to Regulation (EU) No 612/2013, if applicable)
an..16
b
EORI Number
C
—
‘O’ if <Destination Type Code> is ‘Destination – Export’
—
Does not apply otherwise
Provide the EORI number of the person responsible for lodging the export declaration as set out in Article 21(5) of Directive 2008/118/EC
an..17
c
Trader Name
R
an..182
d
Street Name
R
an..65
e
Street Number
O
an..11
f
Postcode
R
an..10
g
City
R
an..50
h
NAD_LNG
R
Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group
a2
4
OFFICE OF DESTINATION
R
a
Office Reference Number
R
(see Code list 5 in Annex II to Regulation (EC) No 684/2009)
an8
5
ALERT
R
a
Date of Alert
R
date
b
e-AD Rejected flag
R
The format of Boolean is digital: ‘0’ or ‘1’ (‘0’ = No or False; ‘1’ = Yes or True)
n1
6
ALERT OR REJECTION OF E-AD REASON Code
C
—
‘R’ if <e-AD Rejected flag> is True
—
‘O’ if otherwise
9x
a
Alert or Rejection of E-AD Reason Code
R
(see Code list 5 in Annex II)
n..2
b
Complementary Information
C
—
‘R’ if <Alert or Rejection of E-AD Reason Code> is ‘Other’
—
‘O’ otherwise
(see Alert or Rejection of E-AD Reason Code in box 6a)
an..350
c
Complementary Information_LNG
C
—
‘R’ if the corresponding text field(s) is(are) used
—
Does not apply otherwise
Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group
a2’
( 1 ) The operator type of the consignee is “Authorised warehouse keeper”. An existing identifier <Trader Excise Number> in the set of <TRADER AUTHORISATION>;
( 2 ) The operator type of the consignee is “Registered consignee”. An existing identifier <Trader Excise Number> in the set of <TRADER AUTHORISATION>;
( 3 ) The operator type of the consignee is either “Authorised warehouse keeper” or “Registered consignee”. An existing identifier <Trader Excise Number> in the set of <TRADER AUTHORISATION>;
( 4 ) An existing <Temporary Authorisation Reference> in the set of <TEMPORARY AUTHORISATION>;
( 5 ) An existing identifier <Tax Warehouse Reference> in the set of <TAX WAREHOUSE>;
( *1 ) For the place of delivery, “Any identification” means: a VAT number or any other identifier; it is optional.
( 6 ) The operator type of the consignee is “Authorised warehouse keeper”. An existing identifier <Trader Excise Number> in the set of <TRADER AUTHORISATION>;
( 7 ) The operator type of the consignee is “Registered consignee”. An existing identifier <Trader Excise Number> in the set of <TRADER AUTHORISATION>;
( 8 ) The operator type of the consignee is either “Authorised warehouse keeper” or “Registered consignee”. An existing identifier <Trader Excise Number> in the set of <TRADER AUTHORISATION>;
( 9 ) An existing <Temporary Authorisation Reference> in the set of <TEMPORARY AUTHORISATION>;
( 10 ) An existing identifier <Tax Warehouse Reference> in the set of <TAX WAREHOUSE>;
( *2 ) For the place of delivery, “Any identification” means: a VAT number or any other identifier; it is optional.
( 11 ) The operator type of the consignee is “Authorised warehouse keeper”. An existing identifier <Trader Excise Number> in the set of <TRADER AUTHORISATION>;
( 12 ) The operator type of the consignee is “Registered consignee”. An existing identifier <Trader Excise Number> in the set of <TRADER AUTHORISATION>;
( 13 ) The operator type of the consignee is either “Authorised warehouse keeper” or “Registered consignee”. An existing identifier <Trader Excise Number> in the set of <TRADER AUTHORISATION>;
( 14 ) An existing <Temporary Authorisation Reference> in the set of <TEMPORARY AUTHORISATION>;
( 15 ) An existing identifier <Tax Warehouse Reference> in the set of <TAX WAREHOUSE>;
( *3 ) For the place of delivery, “Any identification” means: a VAT number or any other identifier; it is optional.
( 16 ) The operator type of the consignee is “Authorised warehouse keeper”. An existing identifier <Trader Excise Number> in the set of <TRADER AUTHORISATION>;
( 17 ) The operator type of the consignee is “Registered consignee”. An existing identifier <Trader Excise Number> in the set of <TRADER AUTHORISATION>;
( 18 ) The operator type of the consignee is either “Authorised warehouse keeper” or “Registered consignee”. An existing identifier <Trader Excise Number> in the set of <TRADER AUTHORISATION>;
( 19 ) An existing <Temporary Authorisation Reference> in the set of <TEMPORARY AUTHORISATION>;
( 20 ) An existing identifier <Tax Warehouse Reference> in the set of <TAX WAREHOUSE>;
( *4 ) For the place of delivery, “Any identification” means: a VAT number or any other identifier; it is optional.
( 21 ) The operator type of the consignee is “Authorised warehouse keeper”. An existing identifier <Trader Excise Number> in the set of <TRADER AUTHORISATION>;
( 22 ) The operator type of the consignee is “Registered consignee”. An existing identifier <Trader Excise Number> in the set of <TRADER AUTHORISATION>;
( 23 ) The operator type of the consignee is either “Authorised warehouse keeper” or “Registered consignee”. An existing identifier <Trader Excise Number> in the set of <TRADER AUTHORISATION>;
( 24 ) An existing <Temporary Authorisation Reference> in the set of <TEMPORARY AUTHORISATION>;
( 25 ) An existing identifier <Tax Warehouse Reference> in the set of <TAX WAREHOUSE>;
( *5 ) For the place of delivery, “Any identification” means: a VAT number or any other identifier; it is optional.
( 26 ) The operator type of the consignee is “Authorised warehouse keeper”. An existing identifier <Trader Excise Number> in the set of <TRADER AUTHORISATION>;
( 27 ) The operator type of the consignee is “Registered consignee”. An existing identifier <Trader Excise Number> in the set of <TRADER AUTHORISATION>;
( 28 ) The operator type of the consignee is either “Authorised warehouse keeper” or “Registered consignee”. An existing identifier <Trader Excise Number> in the set of <TRADER AUTHORISATION>;
( 29 ) An existing <Temporary Authorisation Reference> in the set of <TEMPORARY AUTHORISATION>;
( 30 ) An existing identifier <Tax Warehouse Reference> in the set of <TAX WAREHOUSE>;
( *6 ) For the place of delivery, “Any identification” means: a VAT number or any other identifier; it is optional.
( 31 ) The operator type of the consignee is “Authorised warehouse keeper”. An existing identifier <Trader Excise Number> in the set of <TRADER AUTHORISATION>;
( 32 ) The operator type of the consignee is “Registered consignee”. An existing identifier <Trader Excise Number> in the set of <TRADER AUTHORISATION>;
( 33 ) The operator type of the consignee is either “Authorised warehouse keeper” or “Registered consignee”. An existing identifier <Trader Excise Number> in the set of <TRADER AUTHORISATION>;
( 34 ) An existing <Temporary Authorisation Reference> in the set of <TEMPORARY AUTHORISATION>;
( 35 ) An existing identifier <Tax Warehouse Reference> in the set of <TAX WAREHOUSE>;
( *7 ) For the place of delivery, “Any identification” means: a VAT number or any other identifier; it is optional.
ANNEX IISupplementary provisions
ANNEX II
Annex II to Regulation (EU) 2016/323 is amended as follows:
(1)
code list 2 is replaced by the following:
‘
Code list 2: Event Report Number/Control Report Reference
Field
Content
Field type
Examples
1
Identifier of the MS where the report is validated
Alphabetic 2
ES
2
Nationally assigned, unique code
Alphanumeric 13
2005YTE17UIC2
3
Check Digit
Numeric 1
9
Field 1 is taken from the list of <MEMBER STATES> ( see Code list 3 in Annex II to Regulation (EC) No 684/2009 )
Field 2 must be filled with a unique identifier per report. The way this field is used is under MSAs' responsibility, but each report must have a unique number. It is possible, but not mandatory, that it contains the year when the report was initially submitted (as suggested in the example).
Field 3 gives the Check Digit for the whole identifier, which will help detect an error when keying this identifier.’;
(2)
code list 4 is replaced by the following:
‘
Code list 4: Refusal Reasons
Code
Description
0
Other
1
The enquiry or information requested could not be authorised under the laws or administrative practices of the requested Member State for its own use (e.g. Confidential information)
2
(reserved)
3
Disclosure contrary to the public policy of the state — The provision of information would lead to the disclosure of a commercial, industrial or professional secret or of a commercial process, or where its disclosure would be contrary to public policy
4
A judicial authority of the requested Member State has refused to allow the transfer of information under its control
5
The request concerns information that is no longer available due to national rules of data retention (5 years or more minimum)
6
The requesting authority has not exhausted the usual sources of information which it could have used in the circumstances
7
The number and the nature of the requests for information made by the requesting authority within a specific period impose a disproportionate administrative burden on that requested authority
8
The requesting Member State is unable, for legal reasons, to provide similar information
9
The consignor has not exhausted all the means available to him to obtain proof that the movement of excise goods between Member States has ended
10
No check performed
11
Out of scope of 389/2012 (e.g. Naples II)’
(3)
code list 6 is replaced by the following:
‘
Code list 6: Evidence Types
Code
Description
0
Other
1
Accident
2
Goods destroyed
3
Goods stolen
6
Vehicle and goods stolen
7
Transhipment of goods’
(4)
code list 8 is replaced by the following:
‘
Code list 8: Request Reasons
Code
Description
0
Other
1
Report of Receipt/Export not returned to consignor
2
Excesses or shortages stated at arrival of good
4
Submission of an e-AD was rejected because the consignee record of SEED did not match — the request is to ask for more information
6
Have goods/quantities specified on e-AD been entered in consignee's stock records?
7
Check that goods have actually left EU (date on which export certified by customs)
8
Placing of goods under a suspensive customs procedure (export warehouse, victualling warehouse, outward processing, etc.)
9
Reimbursement of excise duty requested
10
Spot checks
11
Copy 3 not returned to Consignor
12
Reverse of Copy 3 endorsed to show excesses or losses
13
Certification of Receipt Incomplete
14
Consignee's Excise Number not in SEED
15
Particular Deleted/Overwritten without official Endorsement
16
Request for Manual closure
17
Export Status Unknown
18
Request for Interruption of a movement
19
Perform interview of authorised representative
20
Fallback document
21
Two e-ADs were created for the same consignment
22
Clarification regarding type or quantity of goods
23
Receipt of goods were rejected/refused
24
Ongoing excise investigation
25
Suspicions of irregularity’
(5)
code list 9 is replaced by the following:
‘
Code list 9: Request Actions
Code
Description
0
Other
2
Administrative control
3
Physical control
4
Confirm entry in trader's records
5
Confirm quantity received
6
Confirm authorisation of trader
7
Confirm the particulars in Box No(s)
11
Confirm identity of the carrier and the number of the vehicle
12
Confirm payment of duty
14
Confirm quantity dispatched
15
Confirm type of goods dispatched
16
Confirm Authenticity of Excise official stamp
17
Confirm Authenticity of Company's Stamp and Trader's signature
18
Confirm Trader's Authorisation and SEED Data
19
Manual closure
20
Hearing of authorised representative (e.g. interview of company manager)
21
Provide reason for shortage
22
Confirm shortage/excess/differences
23
Provide proof that the movement of excise goods has ended
24
Confirm purpose of goods or next purchaser of goods
25
Please see attached request
26
Follow-up measure needs to be taken from the Consignor
27
Correction required in Export declaration
28
Confirm the content of the Export Declaration
29
Inform if the movement has already been released by Customs
30
Provide Export MRN’
(6)
code list 11 is replaced by the following:
‘
Code list 11: Administrative Cooperation Action Not Possible Reasons
Code
Description
0
Other
1
Missing information
2
Confidential information
3
Missing time
4
Deep investigation on economic operator ongoing, short-term answer not possible
5
Trader could not be contacted
6
Missing trader’
(7)
a new code list 15 is added:
‘
Code list 15: Type of Document
Code
Description
0
Other
1
e-AD
2
SAAD
3
Invoice
4
Delivery note
5
CMR
6
Bill of lading
7
Way Bill
8
Contract
9
Trader's Application
10
Official record
11
Request
12
Answer
13
Fallback documents, Fallback Printout
14
Photo
15
Export Declaration
16
Anticipated Export Record
17
Exit Results
18
SAD (Single Administrative Document)’
