Article 1
Open βThe references of harmonised standards for pressure equipment drafted in support of Directive 2014/68/EU, listed in Annex I to this Decision, are hereby published in the Official Journal of the European Union .
Source
No longer in force
Commission Implementing Decision (EU) 2019/1616 of 27 September 2019 on the harmonised standards for pressure equipment drafted in support of Directive 2014/68/EU of the European Parliament and of the Council
Commission Implementing Decision (EU) 2019/1616 of 27 September 2019 on the harmonised standards for pressure equipment drafted in support of Directive 2014/68/EU of the European Parliament and of the Council
RepealedThis legislation has been repealed. Do not cite it as law in force.
Version history
- Superseded version
- In force
Data as of 2026-11-02 Β· Compiled from an official source version. Later amendments or repeals may not be reflected; the official text prevails. Β· Read the official text β
Article 2
Open βThe references of harmonised standards for pressure equipment drafted in support of Directive 2014/68/EU, listed in Annex II to this Decision, are hereby withdrawn from the Official Journal of the European Union as from the dates set out in that Annex.
Article 3
Open βThis Decision shall enter into force on the day of its publication in the Official Journal of the European Union .
Supplementary provisions
ANNEX ISupplementary provisions
Open βANNEX I No Reference of the standard 1. EN 1562:2019 Founding β Malleable cast irons 2. EN 1563:2018 Founding β Spheroidal graphite cast irons 3. EN ISO 4126-2:2019 Safety devices for protection against excessive pressure β Part 2: Bursting disc safety devices (ISO 4126-2:2018) 4. EN 12516-1:2014+A1:2018 Industrial valves β Shell design strength β Part 1: Tabulation method for steel valve shells 5. EN 12516-4:2014+A1:2018 Industrial valves β Shell design strength β Part 4: Calculation method for valve shells manufactured in metallic materials other than steel 6. EN 13136:2013+A1:2018 Refrigerating systems and heat pumps β Pressure relief devices and their associated piping β Methods for calculation βββββ 7a. EN 13445-2:2021 Unfired pressure vessels β Part 2: Materials βββββ 8a. EN 13445-3:2021 Unfired pressure vessels β Part 3: Design βββββ 9a. EN 13445-5:2021 Unfired pressure vessels β Part 5: Inspection and testing βββββ 10a. EN 13445-6:2021 Unfired pressure vessels β Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron βββββ 11a. EN 13480-2:2017 Metallic industrial piping - Part 2: Materials EN 13480-2:2017/A3:2018 EN 13480-2:2017/A1:2018 EN 13480-2:2017/A2:2018 EN 13480-2:2017/A7:2020 EN 13480-2:2017/A8:2021 βββββ 12a. EN 13480-5:2017 Metallic industrial piping - Part 5: Inspection and testing EN 13480-5:2017/A1:2019 EN 13480-5:2017/A2:2021 13. EN ISO 15494:2018 Plastics piping systems for industrial applications β Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) β Metric series for specifications for components and the system (ISO 15494:2015) 14. EN ISO 21028-2:2018 Cryogenic vessels β Toughness requirements for materials at cryogenic temperature β Part 2: Temperatures between β 80 degrees C and β 20 degrees C (ISO 21028-2:2018) 15. EN ISO 4126-1:2013 Safety devices for protection against excessive pressure β Part 1: Safety valves (ISO 4126-1:2013) EN ISO 4126-1:2013/A2:2019 16. EN 10217-1:2019 Welded steel tubes for pressure purposes β Technical delivery conditions β Part 1: Electric welded and submerged arc welded non-alloy steel tubes with specified room temperature properties 17. EN 10217-2:2019 Welded steel tubes for pressure purposes β Technical delivery conditions β Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties 18. EN 10217-3:2019 Welded steel tubes for pressure purposes β Technical delivery conditions β Part 3: Electric welded and submerged arc welded alloy fine grain steel tubes with specified room, elevated and low temperature properties 19. EN 10217-4:2019 Welded steel tubes for pressure purposes β Technical delivery conditions β Part 4: Electric welded non-alloy steel tubes with specified low temperature properties 20. EN 10217-5:2019 Welded steel tubes for pressure purposes β Technical delivery conditions β Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties 21. EN 10217-6:2019 Welded steel tubes for pressure purposes β Technical delivery conditions β Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties 22. EN 13480-1:2017 Metallic industrial piping β Part 1: General EN 13480-1:2017/A1:2019 23. EN 13480-6:2017 Metallic industrial piping β Part 6: Additional requirements for buried piping EN 13480-6:2017/A1:2019 24. EN ISO 4126-3:2020 Safety devices for protection against excessive pressure - Part 3: Safety valves and bursting disc safety devices in combination (ISO 4126-3:2020) 25. EN 12542:2020 LPG equipment and accessories - Static welded steel cylindrical pressure vessels, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m 3 - Design and manufacture 26. EN 12735-1:2020 Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 1: Tubes for piping systems 27. EN 12953-5:2020 Shell boilers - Part 5: Inspection during construction, documentation and marking of pressure parts of the boiler 28. EN 13175:2019+A1:2020 LPG Equipment and accessories - Specification and testing for Liquefied Petroleum Gas (LPG) pressure vessel valves and fittings βββββ 29a. EN 13480-3:2017 Metallic industrial piping - Part 3: Design and calculation EN 13480-3:2017/A3:2020 EN 13480-3:2017/A1:2021 EN 13480-3:2017/A2:2020 EN 13480-3:2017/A4:2021 30. EN 14276-1:2020 Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements 31. EN 14276-2:2020 Pressure equipment for refrigerating systems and heat pumps - Part 2: Piping - General requirements 32. EN ISO 15620:2019 Welding - Friction welding of metallic materials (ISO 15620:2019) 33. EN ISO 16135:2006 Industrial valves - Ball valves of thermoplastics materials (ISO 16135:2006) EN ISO 16135:2006/A1:2019 34. EN ISO 16136:2006 Industrial valves - Butterfly valves of thermoplastics materials (ISO 16136:2006) EN ISO 16136:2006/A1:2019 35. EN ISO 16137:2006 Industrial valves - Check valves of thermoplastics materials (ISO 16137:2006) EN ISO 16137:2006/A1:2019 36. EN ISO 16138:2006 Industrial valves - Diaphragm valves of thermoplastics materials (ISO 16138:2006) EN ISO 16138:2006/A1:2019 37. EN ISO 16139:2006 Industrial valves - Gate valves of thermoplastics materials (ISO 16139:2006) EN ISO 16139:2006/A1:2019 38. EN 16767:2020 Industrial valves - Metallic check valves 39. EN ISO 21787:2006 Industrial valves - Globe valves of thermoplastics materials (ISO 21787:2006) EN ISO 21787:2006/A1:2019 40. EN 1515-4:2021 Flanges and their joints β Bolting β Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 2014/68/EU 41. EN 14222:2021 Stainless steel steam boilers 42. EN 10216-5:2021 Seamless steel tubes for pressure purposes β Technical delivery conditions β Part 5: Stainless steel tubes 43. EN 10217-7:2021 Welded steel tubes for pressure purposes β Technical delivery conditions β Part 7: Stainless steel tubes 44. EN 10222-2:2017+A1:2021 Steel forgings for pressure purposes β Part 2: Ferritic and martensitic steels with specified elevated temperatures properties 45. EN 10222-4:2017+A1:2021 Steel forgings for pressure purposes β Part 4: Weldable fine grain steels with high proof strength 46. EN 13445-1:2021 Unfired pressure vessels β Part 1: General 47. EN 13445-4:2021 Unfired pressure vessels β Part 4: Fabrication 48. EN 13445-8:2021 Unfired pressure vessels β Part 8: Additional requirements for pressure vessels of aluminium and aluminium alloys 49. EN 13445-10:2021 Unfired pressure vessels β Part 10: Additional requirements for pressure vessels of nickel and nickel alloys 50. EN 17278:2021 Natural gas vehicles β Vehicle fuelling appliances 51. EN 3-8:2021 Portable fire extinguishers - Part 8: Requirements for the construction, pressure resistance and mechanical tests for extinguishers with a maximum allowable pressure equal to or lower than 30 bar, which comply with the requirements of EN 3-7 52. EN ISO 9712:2022 Non-destructive testing - Qualification and certification of NDT personnel (ISO 9712:2021) 53. EN 10253-2:2021 Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements 54. EN 12516-2:2014+A1:2021 Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells 55. EN 12952-2:2021 Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories 56. EN 12952-5:2021 Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler 57. EN 12952-6:2021 Water-tube boilers and auxiliary installations - Part 6: Inspection during construction, documentation and marking of pressure parts of the boiler 58. EN 12952-10:2021 Water-tube boilers and auxiliary installations - Part 10: Requirements for safety devices against excessive pressure 59. EN 13121-1:2021 GRP tanks and vessels for use above ground - Part 1: Raw materials - Specification conditions and acceptance criteria 60. EN 14917:2021 Metal bellows expansion joints for pressure applications 61. EN ISO 21922:2021 Refrigerating systems and heat pumps - Valves - Requirements, testing and marking (ISO 21922:2021)
ANNEX IISupplementary provisions
Open βANNEX II No Reference of the standard Date of withdrawal 1. EN 13445-2:2014 Unfired pressure vessels β Part 2: Materials EN 13445-2:2014/A1:2016 EN 13445-2:2014/A2:2018 30 September 2019 2. EN 13445-3:2014 Unfired pressure vessels β Part 3: Design EN 13445-3:2014/A1:2015 EN 13445-3:2014/A2:2016 EN 13445-3:2014/A3:2017 EN 13445-3:2014/A4:2018 30 September 2019 3. EN 13445-5:2014 Unfired pressure vessels β Part 5: Inspection and testing 30 September 2019 4. EN 13445-6:2014 Unfired pressure vessels β Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron 30 September 2019 5. EN 13480-2:2017 Metallic industrial piping β Part 2: Materials 30 September 2019 6. EN 13480-5:2017 Metallic industrial piping β Part 5: Inspection and testing 30 September 2019 7. EN 1252-2:2001 Cryogenic vessels β Materials β Part 2: Toughness requirements for temperatures between βΒ 80 Β°C and βΒ 20 Β°C 30 March 2020 8. EN 1562:2012 Founding β Malleable cast irons 30 March 2020 9. EN 1563:2011 Founding β Spheroidal graphite cast irons 30 March 2020 10. EN 12516-1:2014 Industrial valves β Shell design strength β Part 1: Tabulation method for steel valve shells 30 March 2020 11. EN 12516-4:2014 Industrial valves β Shell design strength β Part 4: Calculation method for valve shells manufactured in metallic materials other than steel 30 March 2020 12. EN 13136:2013 Refrigerating systems and heat pumps β Pressure relief devices and their associated piping β Methods for calculation 30 March 2020 13. EN 10217-1:2002 Welded steel tubes for pressure purposes β Technical delivery conditions β Part 1: Non-alloy steel tubes with specified room temperature properties EN 10217-1:2002/A1:2005 20 April 2021 14. EN 10217-2:2002 Welded steel tubes for pressure purposes β Technical delivery conditions β Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties EN 10217-2:2002/A1:2005 20 April 2021 15. EN 10217-3:2002 Welded steel tubes for pressure purposes β Technical delivery conditions β Part 3: Alloy fine grain steel tubes EN 10217-3:2002/A1:2005 20 April 2021 16. EN 10217-4:2002 Welded steel tubes for pressure purposes β Technical delivery conditions β Part 4: Electric welded non-alloy steel tubes with specified low temperature properties EN 10217-4:2002/A1:2005 20 April 2021 17. EN 10217-5:2002 Welded steel tubes for pressure purposes β Technical delivery conditions β Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties EN 10217-5:2002/A1:2005 20 April 2021 18. EN 10217-6:2002 Welded steel tubes for pressure purposes β Technical delivery conditions β Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties EN 10217-6:2002/A1:2005 20 April 2021 19. EN 13480-1:2017 Metallic industrial piping β Part 1: General 20 April 2020 20. EN 13480-6:2017 Metallic industrial piping β Part 6: Additional requirements for buried piping 20 April 2020 21. EN ISO 4126-1:2013 Safety devices for protection against excessive pressure β Part 1: Safety valves (ISO 4126-1:2013) 20 April 2020 22. EN 12542:2010 LPG equipment and accessories - Static welded steel cylindrical tanks, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m 3 - Design and manufacture 10 August 2022 23. EN 12735-1:2016 Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 1: Tubes for piping systems 10 August 2022 24. EN 12953-5:2002 Shell boilers - Part 5: Inspection during construction, documentation and marking of pressure parts of the boiler 10 August 2022 25. EN 13175:2014 LPG Equipment and accessories - Specification and testing for Liquefied Petroleum Gas (LPG) pressure vessel valves and fittings 10 August 2022 26. EN 13480-3:2017 Metallic industrial piping - Part 3: Design and calculation 10 August 2022 27. EN 14276-1:2006+A1:2011 Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements 10 August 2022 28. EN 14276-2:2007+A1:2011 Pressure equipment for refrigerating systems and heat pumps - Part 2: Piping - General requirements 10 August 2022 29. EN 16767:2016 Industrial valves - Steel and cast iron check valves 10 August 2022 30. EN ISO 15620:2000 Welding - Friction welding of metallic materials (ISO 15620:2000) 10 August 2022 31. EN ISO 16135:2006 Industrial valves - Ball valves of thermoplastics materials (ISO 16135:2006) 10 August 2022 32. EN ISO 16136:2006 Industrial valves - Butterfly valves of thermoplastics materials (ISO 16136:2006) 10 August 2022 33. EN ISO 16137:2006 Industrial valves - Check valves of thermoplastics materials (ISO 16137:2006) 10 August 2022 34. EN ISO 16138:2006 Industrial valves - Diaphragm valves of thermoplastics materials (ISO 16138:2006) 10 August 2022 35. EN ISO 16139:2006 Industrial valves - Gate valves of thermoplastics materials (ISO 16139:2006) 10 August 2022 36. EN ISO 21787:2006 Industrial valves - Globe valves of thermoplastics materials (ISO 21787:2006) 10 August 2022 37. EN ISO 4126-3:2006 Safety devices for protection against excessive pressure - Part 3: Safety valves and bursting disc safety devices in combination (ISO 4126-3:2006) 10 August 2022 38. EN 1515-4:2009 Flanges and their joints β Bolting β Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC 12Β April 2023 39. EN 14222:2003 Stainless steel shell boilers 12Β April 2023 40. EN 10216-5:2013 Seamless steel tubes for pressure purposes β Technical delivery conditions β Part 5: Stainless steel tubes 21Β June 2023 41. EN 10217-7:2014 Welded steel tubes for pressure purposes β Technical delivery conditions β Part 7: Stainless steel tubes 21Β June 2023 42. EN 10222-2:2017 Steel forgings for pressure purposes β Part 2: Ferritic and martensitic steels with specified elevated temperatures properties 21Β June 2023 43. EN 10222-4:2017 Steel forgings for pressure purposes β Part 4: Weldable fine grain steels with high proof strength 21Β June 2023 44. EN 13445-1:2014 Unfired pressure vessels β Part 1: General EN 13445-1:2014/A1:2014 21Β June 2023 45. EN 13445-4:2014 Unfired pressure vessels β Part 4: Fabrication 21Β June 2023 46. EN 13445-8:2014 Unfired pressure vessels β Part 8: Additional requirements for pressure vessels of aluminium and aluminium alloys EN 13445-8:2014/A1:2014 21Β June 2023 47. EN 10253-2:2007 Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements 3.4.2024 48. EN 12284:2003 Refrigerating systems and heat pumps - Valves - Requirements, testing and marking 3.4.2024 49. EN 12516-2:2014 Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells 3.4.2024 50. EN 12952-10:2002 Water-tube boilers and auxiliary installations - Part 10: Requirements for safeguards against excessive pressure 3.4.2024 51. EN 12952-2:2011 Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories 3.4.2024 52. EN 12952-5:2011 Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler 3.4.2024 53. EN 12952-6:2011 Water-tube boilers and auxiliary installations - Part 6: Inspection during construction; documentation and marking of pressure parts of the boiler 3.4.2024 54. EN 13121-1:2003 GRP tanks and vessels for use above ground - Part 1: Raw materials - Specification conditions and acceptance conditions 3.4.2024 55. EN 14917:2009+A1:2012 Metal bellows expansion joints for pressure applications 3.4.2024 56. EN 3-8:2006 Portable fire extinguishers - Part 8: Additional requirements to EN 3-7 for the construction, resistance to pressure and mechanical tests for extinguishers with a maximum allowable pressure equal to or lower than 30 bar EN 3-8:2006/AC:2007 3.4.2024 57. EN ISO 9712:2012 Non-destructive testing - Qualification and certification of NDT personnel (ISO 9712:2012) 3.4.2024
Other acts of the same type
Commission Implementing Decision (EU) 2020/2127 of 16 December 2020 amending Commission Implementing Decision (EU) 2019/541 on the equivalence of the legal and supervisory framework applicable to approved exchanges and recognised market operators in Singapore in accordance with Regulation (EU) No 600/2014 of the European Parliament and of the Council (Text with EEA relevance)Commission Implementing Decision (EU) 2021/150 of 16 December 2020 on an exemption in favour of City of Derry Airport from the requirement to hold a certificate granted by Ireland on the basis of Article 41(6) of Regulation (EU) 2018/1139 of the European Parliament and of the Council (notified under document C(2020) 8914) (Only the English text is authentic)Council Decision (EU) 2020/2137 of 15 December 2020 on the position to be taken on behalf of the European Union within the CARIFORUM-EU Trade and Development Committee established by the Economic Partnership Agreement between the CARIFORUM States, of the one part, and the European Community and its Member States, of the other part, as regards the establishment of a Special Committee on ServicesCouncil Decision (EU) 2020/2138 of 15 December 2020 on the position to be taken on behalf of the European Union within the Joint Committee established by the Common Aviation Area Agreement between the European Union and its Member States, of the one part, and Georgia, of the other part, with regard to the adoption of the rules of procedure of the Joint CommitteeCouncil Decision (EU) 2020/2139 of 15 December 2020 on the position to be taken on behalf of the European Union within the Joint Committee established by the Euro-Mediterranean Aviation Agreement between the European Union and its Member States, of the one part, and the Hashemite Kingdom of Jordan of the other part, with regard to the adoption of the rules of procedure of the Joint CommitteeCouncil Decision (EU) 2020/2140 of 15 December 2020 on the position to be taken on behalf of the European Union within the Joint Committee established by the Euro-Mediterranean Aviation Agreement between the European Union and its Member States, of the one part, and the government of the State of Israel, of the other part, with regard to the adoption of the rules of procedure of the Joint CommitteeCouncil Decision (EU) 2020/2141 of 15 December 2020 on the position to be taken on behalf of the European Union within the Joint Committee established by the Common Aviation Area Agreement between the European Union and its Member States and the Republic of Moldova, with regard to the adoption of the rules of procedure of the Joint CommitteeCouncil Decision (EU, Euratom) 2020/2053 of 14 December 2020 on the system of own resources of the European Union and repealing Decision 2014/335/EU, EuratomCommission Implementing Decision (EU) 2020/2106 of 14 December 2020 on a safeguard measure taken by Finland pursuant to Directive 2006/42/EC of the European Parliament and of the Council, to prohibit the placing on the market of Biltema Nordic Servicesβ engine hoist shop crane with model reference 15-371, manufactured by Biltema Nordic Services AB and distributed on the Finnish market by Biltema Suomi Oy (notified under document C(2020) 8781) (Text with EEA relevance)Council Decision (EU) 2020/2136 of 14 December 2020 adopting the Councilβs position on the second draft general budget of the European Union for the financial year 2021Council Decision (EU, Euratom) 2020/2030 of 10 December 2020 amending the Councilβs Rules of ProcedureCouncil Decision (CFSP) 2020/2031 of 10 December 2020 amending Decision 2012/389/CFSP on the European Union Capacity Building Mission in Somalia (EUCAP Somalia)
Source: EUR-Lex (Publications Office of the EU), Β© European Union, reuse permitted under Commission Decision 2011/833/EU.
What to look at next
Browse all EU Legal ActsEvery instrument by type and year, full text free to read section by sectionEuropean Union legislationEU Legal Acts by type and yearGrouped by instrument type and year of enactment, so you can find others of the same kindBrowse by type and yearEuropean Union: what this database coversWhich datasets are here, which official source they come from, and how current they areEuropean Union overview