ANNEX IISupplementary provisions
ANNEX II No Reference of the standard Date of withdrawal 1. EN 13445-2:2014 Unfired pressure vessels — Part 2: Materials EN 13445-2:2014/A1:2016 EN 13445-2:2014/A2:2018 30 September 2019 2. EN 13445-3:2014 Unfired pressure vessels — Part 3: Design EN 13445-3:2014/A1:2015 EN 13445-3:2014/A2:2016 EN 13445-3:2014/A3:2017 EN 13445-3:2014/A4:2018 30 September 2019 3. EN 13445-5:2014 Unfired pressure vessels — Part 5: Inspection and testing 30 September 2019 4. EN 13445-6:2014 Unfired pressure vessels — Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron 30 September 2019 5. EN 13480-2:2017 Metallic industrial piping — Part 2: Materials 30 September 2019 6. EN 13480-5:2017 Metallic industrial piping — Part 5: Inspection and testing 30 September 2019 7. EN 1252-2:2001 Cryogenic vessels — Materials — Part 2: Toughness requirements for temperatures between – 80 °C and – 20 °C 30 March 2020 8. EN 1562:2012 Founding — Malleable cast irons 30 March 2020 9. EN 1563:2011 Founding — Spheroidal graphite cast irons 30 March 2020 10. EN 12516-1:2014 Industrial valves — Shell design strength — Part 1: Tabulation method for steel valve shells 30 March 2020 11. EN 12516-4:2014 Industrial valves — Shell design strength — Part 4: Calculation method for valve shells manufactured in metallic materials other than steel 30 March 2020 12. EN 13136:2013 Refrigerating systems and heat pumps — Pressure relief devices and their associated piping — Methods for calculation 30 March 2020