Commission Implementing Regulation (EU) 2019/613 of 9 April 2019 concerning the classification of certain goods in the Combined Nomenclature

• CELEX: Implementing Regulation (EU) 2019/613
• Articles: 4

Article 1

The goods described in column (1) of the table set out in the Annex shall be classified within the Combined Nomenclature under the CN code indicated in column (2) of that table.

Article 2

Binding tariff information which does not conform to this Regulation may continue to be invoked in accordance with Article 34(9) of Regulation (EU) No 952/2013 for a period of three months from the date of entry into force of this Regulation.

Article 3

This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union .

Schedules & Appendices

ANNEX

ANNEX

Description of the goods

Classification

(CN-code)

Reasons

(1)

(2)

(3)

A threaded article made of stainless steel with an internal thread. It is in the form of a nut with a flange on one end.

The article is designed to be used in the pipeline assembly of the hydraulic braking system of a motor vehicle.

The article, when tightened, causes the components of the connecting joint to settle into the correct position, thus securing the hydraulic seal.

See images  ( *1 ) .

7318 16 39

Classification is determined by general rules (GIR) 1 and 6 for the interpretation of the Combined Nomenclature and by the wording of CN codes 7318 , 7318 16 and 7318 16 39 .

The article has the objective characteristics of ‘threaded articles’ classified under heading 7318 .

Classification under heading 7307 as tube or pipe fittings is excluded as the article only presses on the components that form the connection in the joint and is not in contact with the liquid transmitted via the pipeline. The inner thread of the article is not designed to form or maintain a hydraulic seal.

The article cannot be classified as an unfinished fitting/coupling by virtue of GIR 2(a) for the interpretation of the Combined Nomenclature because it does not have the essential character of the finished fitting/coupling.

Bolts, nuts, screws, etc. suitable for use in the assembly of tube or pipe fittings are excluded from heading 7307 (see also the Harmonized System Explanatory Notes to heading 7307 , exclusions, point (b)).

Consequently, the article is to be classified under CN code 7318 16 39 as other nuts of stainless steel.

( *1 )   The images are purely for information.