My bookmarksSign up free

Commission Implementing Decision (EU) 2020/1835 of 3 December 2020 on the harmonised standards for accreditation and conformity assessment (Text with EEA relevance)

Commission Implementing Decision (EU) 2020/1835 of 3 December 2020 on the harmonised standards for accreditation and conformity assessment (Text with EEA relevance)

Implementing Decision (EU) 2020/1835 Β· Decision Β· 6 articles

Data as of 2026-07-04 Β· Compiled from an official source version. Later amendments or repeals may not be reflected; the official text prevails. Β· Read the official text β†—

Article 1

The references of the harmonised standards for accreditation of conformity assessment bodies listed in Annex II, drafted in support of the legal acts listed in Annex I, are hereby published in the Official Journal of the European Union .

Article 2

The references of the harmonised standards listed in Annex III are hereby withdrawn from the Official Journal of the European Union as from the dates set out in that Annex.

Article 3

This Decision shall enter into force on the day of its publication in the Official Journal of the European Union .

Supplementary provisions

ANNEX ISupplementary provisions

ANNEX I 1.Β Β Β  Directive 98/79/EC of the European Parliament and of the Council of 27 October 1998 on in vitro diagnostic medical devices ( OJ L 331, 7.12.1998, p. 1 ). 2.Β Β Β  Regulation (EC) No 765/2008 of the European Parliament and of the Council of 9 July 2008 setting out the requirements for accreditation and market surveillance relating to the marketing of products and repealing Regulation (EEC) No 339/93 ( OJ L 218, 13.8.2008, p. 30 ). 3.Β Β Β  Regulation (EC) No 1221/2009 of the European Parliament and of the Council of 25 November 2009 on the voluntary participation by organisations in a Community eco-management and audit scheme (EMAS), repealing Regulation (EC) No 761/2001 and Commission Decisions 2001/681/EC and 2006/193/EC ( OJ L 342, 22.12.2009, p. 1 ). 4.Β Β Β  Commission Implementing Regulation (EU) 2018/2067 of 19 December 2018 on the verification of data and on the accreditation of verifiers pursuant to Directive 2003/87/EC of the European Parliament and of the Council ( OJ L 334, 31.12.2018, p. 94 ).

ANNEX IISupplementary provisions

ANNEX II No Reference of the standard 1. EN ISO 14064-1:2019 Greenhouse gases - Part 1: Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals (ISO 14064-1:2018) 2. EN ISO 14064-2:2019 Greenhouse gases - Part 2: Specification with guidance at the project level for quantification, monitoring and reporting of greenhouse gas emission reductions or removal enhancements (ISO 14064-2:2019) 3. EN ISO 14064-3:2019 Greenhouse gases - Part 3: Specification with guidance for the verification and validation of greenhouse gas statements (ISO 14064-3:2019) 4. EN ISO 15195:2019 Laboratory medicine - Requirements for the competence of calibration laboratories using reference measurement procedures (ISO 15195:2018) 5. EN ISO/IEC 17029:2019 Conformity Assessment - General principles and requirements for validation and verification bodies (ISO/IEC 17029:2019)

ANNEX IIISupplementary provisions

ANNEX III No Reference of the standard Date of withdrawal 1. EN ISO 14064-1:2012 Greenhouse gases - Part 1: Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals (ISO 14064-1:2006) 1.7.2022 2. EN ISO 14064-2:2012 Greenhouse gases - Part 2: Specification with guidance at the project level for quantification, monitoring and reporting of greenhouse gas emission reductions or removal enhancements (ISO 14064-2:2006) 1.7.2022 3. EN ISO 14064-3:2012 Greenhouse gases - Part 3: Specification with guidance for the validation and verification of greenhouse gas assertions (ISO 14064-3:2006) 1.7.2022 4. EN ISO 15195:2003 Laboratory medicine - Requirements for reference measurement laboratories (ISO 15195:2003) 1.7.2022 5. EN ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:2005) EN ISO/IEC 17025:2005/AC:2006 1.7.2021

Source: EUR-Lex (Publications Office of the EU), Β© European Union, reuse permitted under Commission Decision 2011/833/EU.

What to look at next