Council Decision (EU) 2025/602 of 5 November 2024 on the position to be taken on behalf of the European Union within the Trade Committee established by the Trade Agreement between the European Union and its Member States, of the one part, and Colombia, Peru and Ecuador, of the other part, as regards modifications to Appendices 2, 2A and 5 to Annex II to that Agreement

• CELEX: Decision (EU) 2025/602
• Articles: 9

Article 1

The position to be taken on the Union’s behalf within the Trade Committee shall be based on the draft Decision of the Trade Committee attached to this Decision.

Article 1

Appendix 2 to Annex II to the Agreement containing the list of working or processing required to be carried out on non-originating materials in order that the product manufactured can obtain originating status is replaced by Appendix 2 set out in Annex 1 to this Decision.

Article 2

This Decision shall enter into force on the date of its adoption.

Article 2

Appendix 2A to Annex II to the Agreement containing the Addendum to the list of working or processing required to be carried out on non-originating materials in order that the product manufactured can obtain originating status is replaced by Appendix 2A set out in Annex 2 to this Decision.

Article 3

Appendix 5 to Annex II to the Agreement containing the list of products to which subparagraph (b) of the Declaration of the European Union concerning Article 5 in relation to originating products from Colombia, Ecuador and Peru applies is replaced by Appendix 5 set out in Annex 3 to this Decision.

Article 4

This Decision shall enter into force on … [60 days after the date of adoption of this Decision].

Schedules & Appendices

ANNEX 1

ANNEX 1

‘Appendix 2

LIST OF WORKING OR PROCESSING REQUIRED TO BE CARRIED OUT ON NON-ORIGINATING MATERIALS IN ORDER THAT THE PRODUCT MANUFACTURED CAN OBTAIN ORIGINATING STATUS

The products mentioned in this list might not be all covered by this Agreement. It is therefore necessary to consult the other parts of this Agreement.

HS heading 2022

Description of product

Working or processing, carried out on non-originating materials, which confers originating status

(1)

(2)

(3) or (4)

Chapter 01

Live animals

All the animals of Chapter 1 shall be wholly obtained

Chapter 02

Meat and edible meat offal

Manufacture in which all the materials of Chapters 1 and 2 used are wholly obtained

Chapter 03

Fish and crustaceans, molluscs and other aquatic invertebrates

Manufacture in which all the materials of Chapter 3 used are wholly obtained

ex Chapter 04

Dairy produce; birds’ eggs; natural honey; edible products of animal origin, not elsewhere specified or included; except for:

Manufacture in which all the materials of Chapter 4 used are wholly obtained

0403

Yogurt; buttermilk, curdled milk and cream, kephir and other fermented or acidified milk and cream, whether or not concentrated or containing added sugar or other sweetening matter or flavoured or containing added fruit, nuts or cocoa

Manufacture in which:

–

all the materials of Chapter 4 used are wholly obtained, and

–

the value of all the materials of Chapter 17 used does not exceed 30 per cent of the ex-works price of the product

ex Chapter 05

Products of animal origin, not elsewhere specified or included; except for:

Manufacture in which all the materials of Chapter 5 used are wholly obtained  ( 1 )

ex ex 0502

Prepared pigs’, hogs’ or boars’ bristles and hair

Cleaning, disinfecting, sorting and straightening of bristles and hair

Chapter 06

Live trees and other plants; bulbs, roots and the like; cut flowers and ornamental foliage

All the products of Chapter 6 shall be wholly obtained

Chapter 07

Edible vegetables and certain roots and tubers

Manufacture in which all the materials of Chapter 7 used are wholly obtained

Chapter 08

Edible fruit and nuts; peel of citrus fruits or melons

Manufacture in which:

–

all the materials of Chapter 8 used are wholly obtained, and

–

the value of all the materials of Chapter 17 used does not exceed 30 per cent of the ex-works price of the product

ex Chapter 09

Coffee, tea, mate and spices; except for:

Manufacture from materials of any heading

0901

Coffee, whether or not roasted or decaffeinated; coffee husks and skins; coffee substitutes containing coffee in any proportion

Manufacture in which all the materials of Chapter 9 used are wholly obtained  ( 2 )

Chapter 10

Cereals

Manufacture in which all the materials of Chapter 10 used are wholly obtained

ex Chapter 11

Products of the milling industry; malt; starches; inulin; wheat gluten; except for:

Manufacture in which all edible vegetables, roots and tubers of Chapter 7, fruits of Chapter 8 and cereals of Chapter 10 used are wholly obtained

1101

Wheat flour

Manufacture from materials of any heading, except that of the product

ex ex 1102

Maize (corn) flour

Manufacture:

–

from materials of any heading, except that of the product, and

–

in which the weight of white maize of heading 1005 used does not exceed 50 per cent of the total weight of the product

ex ex 1106

Flour, meal and powder of the dried, shelled leguminous vegetables of heading 0713

Manufacture from materials of any heading, except that of the product

ex ex 1108

Maize (corn) starch

Manufacture:

–

from materials of any heading, except that of the product, and

–

in which the weight of yellow maize of heading 1005 used does not exceed 20 per cent of the total weight of the product

Chapter 12

Oil seeds and oleaginous fruits; miscellaneous grains, seeds and fruit; industrial or medicinal plants; straw and fodder

Manufacture in which all the materials of Chapter 12 used are wholly obtained

1301

Lac; natural gums, resins, gum-resins and oleoresins(for example, balsams)

Manufacture in which the value of all the materials of heading 1301 used does not exceed 50 per cent of the ex-works price of the product

1302

Vegetable saps and extracts; pectic substances, pectinates and pectates; agar-agar and other mucilages and thickeners, whether or not modified, derived from vegetable products:

–

Mucilages and thickeners, modified, derived from vegetable products

Manufacture from non-modified mucilages and thickeners

–

Pectic substances, pectinates and pectates

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

–

Other

Manufacture from materials of any heading, except that of the product

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

Chapter 14

Vegetable plaiting materials; vegetable products not elsewhere specified or included

Manufacture in which all the materials of Chapter 14 used are wholly obtained

ex Chapter 15

Animal, vegetable or microbial fats and oils and their cleavage products; prepared edible fats; animal or vegetable waxes; except for:

Manufacture from materials of any heading, except that of the product

1507 to 1508

Soya-bean oil, ground nut oil, and their fractions, but not chemically modified

Manufacture from materials of any heading, except that of the product  ( 3 )

1509 to 1511

Olive oil, other oils obtained solely from olives, palm oil and their fractions, but not chemically modified

Manufacture in which all the vegetable materials used are wholly obtained

1512 to 1515

Sunflower-seed, safflower or cotton-seed, coconut (copra), palm kernel, babassu, rape, colza, mustard, other fixed vegetable or microbial fats and oils (including jojoba oil) and their fractions, but not chemically modified

Manufacture from materials of any heading, except that of the product  ( 4 )

1516

Animal, vegetable or microbial fats and oils and their fractions, partly or wholly hydrogenated, inter-esterified, re-esterified or elaidinised, whether or not refined, but not further prepared

Manufacture in which the value of all the materials used does not exceed 20 per cent of the ex-works price of the product  ( 5 )

1517

Margarine; edible mixtures or preparations of animal, vegetable or microbial fats or oils or of fractions of different fats or oils of this Chapter, other than edible fats or oils or their fractions of heading 1516

Manufacture in which:

–

at least 40 per cent by weight of all the materials of Chapter 4 used are originating, and

–

the value of all the materials used does not exceed 20 per cent of the ex-works price of the product  ( 6 )

ex Chapter 16

Preparations of meat, of fish of crustaceans, molluscs or other aquatic invertebrates, or of insects; except for:

Manufacture:

–

from animals of Chapter 1, and

–

in which all the materials of Chapter 3 used are wholly obtained

ex ex 1601 to ex ex 1602

Sausages and similar products; food preparations; homogenised preparations, other prepared or preserved products, of insects

Manufacture in which insects of Chapter 1 and 4 used are wholly obtained

ex Chapter 17

Sugars and sugar confectionery; except for:

Manufacture from materials of any other chapter, except that of the product

1702

Other sugars, including chemically pure lactose, maltose, glucose and fructose, in solid form; sugar syrups not containing added flavouring or colouring matter; artificial honey, whether or not mixed with natural honey; caramel

Manufacture from materials of any other chapter, except that of the product and Chapter 11

1704

Sugar confectionery (including white chocolate), not containing cocoa

Manufacture:

–

from materials of any heading, except that of the product, and

–

in which the value of all the materials of Chapter 17 used does not exceed 50 per cent of the ex-works price of the product

ex Chapter 18

Cocoa and cocoa preparations; except for:

Manufacture in which all the materials of Chapter 18 used are wholly obtained

1803 to 1805

Cocoa paste, whether or not defatted; cocoa butter, fat and oil; cocoa powder, not containing added sugar or other sweetening matter

Manufacture:

–

from materials of any heading, except that of the product, and

–

in which the weight of cocoa of headings 1801 and 1802 used does not exceed 50 per cent of the total weight of the product  ( 7 )

1806

Chocolate and other food preparations containing cocoa

Manufacture:

–

from materials of any heading, except that of the product, and

–

in which the value of all the materials of Chapter 17 used does not exceed 30 per cent of the ex-works price of the product

1901

Malt extract; food preparations of flour, groats, meal, starch or malt extract, not containing cocoa or containing less than 40 per cent by weight of cocoa calculated on a totally defatted basis, not elsewhere specified or included; food preparations of goods of headings 0401 to 0404 , not containing cocoa or containing less than 5 per cent by weight of cocoa calculated on a totally defatted basis, not elsewhere specified or included:

–

Malt extract

Manufacture from cereals of Chapter 10

–

“Dulce de leche” (“arequipe” or “manjar blanco”)

Manufacture:

–

from materials of any heading, except that of the product, and

–

in which the weight of all the materials of Chapter 4 used does not exceed 50 per cent of the total weight of the product

–

Other dairy preparations containing more than 10 per cent by weight of milk solids

Manufacture from materials of any heading, except that of the product

–

Other

Manufacture:

–

from materials of any heading, except that of the product, and

–

in which the value of all the materials of Chapter 17 used does not exceed 30 per cent of the ex-works price of the product

1902

Pasta, whether or not cooked or stuffed (with meat or other substances) or otherwise prepared, such as spaghetti, macaroni, noodles, lasagne, gnocchi, ravioli, cannelloni; couscous, whether or not prepared:

–

Containing 20 per cent or less by weight of meat, meat offal, fish, crustaceans or molluscs

Manufacture in which all the materials of Chapter 11 used are originating. However, durum wheat and its derivatives of Chapter 11 may be used

–

Containing more than 20 per cent by weight of meat, meat offal, fish, crustaceans or molluscs

Manufacture in which:

–

all the materials of Chapter 11 used are originating. However, durum wheat and its derivatives of Chapter 11 may be used, and

–

all the materials of Chapters 2 and 3 used are wholly obtained

1903

Tapioca and substitutes therefore prepared from starch, in the form of flakes, grains, pearls, siftings or similar forms

Manufacture from materials of any heading, except from potato starch of heading 1108

1904

Prepared foods obtained by the swelling or roasting of cereals or cereal products (for example, corn flakes); cereals (other than maize (corn)) in grain form or in the form of flakes or other worked grains (except flour, groats and meal), pre-cooked or otherwise prepared, not elsewhere specified or included

Manufacture:

–

from materials of any heading, except those of heading 1806 ,

–

in which all the materials of Chapter 11 used are originating. However, durum wheat and Zea indurate maize, and their derivatives of Chapter 11 may be used, and

–

in which the value of all the materials of Chapter 17 used does not exceed 30 per cent of the ex-works price of the product

1905

Bread, pastry, cakes, biscuits and other bakers’ wares, whether or not containing cocoa; communion wafers, empty cachets of a kind suitable for pharmaceutical use, sealing wafers, rice paper and similar products

Manufacture:

–

from materials of any heading, except those of Chapter 11, and

–

in which mixes and doughs for the preparation of bakers’ wares classified in heading 1901 do not exceed 20 per cent of the ex-works price of the product

ex Chapter 20

Preparations of vegetables, fruit, nuts or other parts of plants; except for:

Manufacture in which all the vegetables, fruits and nuts of Chapters 7 and 8 used are wholly obtained

ex ex 2001

Yams, sweet potatoes and similar edible parts of plants containing 5 per cent or more by weight of starch, prepared or preserved by vinegar or acetic acid

Manufacture from materials of any heading, except that of the product

2006

Vegetables, fruit, nuts, fruit-peel and other parts of plants, preserved by sugar(drained, glacé or crystallised)

Manufacture in which:

–

the weight of all the materials of Chapter 7 and 8 used does not exceed 50 per cent of the total weight of the product, and

–

the value of all the materials of Chapter 17 used does not exceed 30 per cent of the ex-works price of the product

2007

Jams, fruit jellies, marmalades, fruit or nut purée and fruit or nut pastes, obtained by cooking, whether or not containing added sugar or other sweetening matter

Manufacture in which:

–

the weight of all the materials of Chapter 7 and 8 used does not exceed 50 per cent of the total weight of the product, and

–

the value of all the materials of Chapter 17 used does not exceed 30 per cent of the ex-works price of the product

ex ex 2008

Fruit, nuts and other edible parts of plants, otherwise prepared or preserved, whether or not containing added sugar or other sweetening matter or spirit, not elsewhere specified or included, except for:

Manufacture in which:

–

the weight of all the materials of Chapter 7 and 8 used does not exceed 50 per cent of the total weight of the product, and

–

the value of all the materials of Chapter 17 used does not exceed 30 per cent of the ex-works price of the product

–

Nuts, not containing added sugar or spirits

Manufacture in which the value of all the nuts and oil seeds of headings 0801 , 0802 and 1202 to 1207 used does not exceed 40 per cent of the ex-works price of the product

–

Peanut butter; mixtures based on cereals; maize(corn)

Manufacture from materials of any heading, except that of the product

–

Palm hearts

Manufacture in which all the materials of Chapter 12 used are wholly obtained

2009

Fruit or nut juices (including grape must and coconut water) and vegetable juices, unfermented and not containing added spirit, whether or not containing added sugar or other sweetening matter

Manufacture:

–

from materials of any heading, except that of the product

–

the weight of all the materials of Chapter 7 and 8 used does not exceed 50 per cent of the total weight of the product, and

–

in which the value of all the materials of Chapter 17 used does not exceed 30 per cent of the ex-works price of the product

ex Chapter 21

Miscellaneous edible preparations; except for:

Manufacture from materials of any heading, except that of the product

2103

Sauces and preparations therefore; mixed condiments and mixed seasonings; mustard flour and meal and prepared mustard:

–

Sauces and preparations therefore; mixed condiments and mixed seasonings

Manufacture from materials of any heading, except that of the product. However, mustard flour or meal or prepared mustard may be used

–

Mustard flour and meal and prepared mustard

Manufacture from materials of any heading

ex ex 2104

Soups and broths and preparations therefore

Manufacture from materials of any heading, except prepared or preserved vegetables of headings 2002 to 2005

2105

Ice cream and other edible ice, whether or not containing cocoa

Manufacture in which the weight of all the materials of Chapter 4 used does not exceed 50 per cent of the total weight of the product

2106

–

Food preparations not elsewhere specified or included, except for sugar syrups and sugar preparations in packages greater than 2 kilograms, not put up for retail sale

Manufacture:

–

from materials of any heading, except that of the product, and

–

in which the value of all the materials of Chapter 17 used does not exceed 30 per cent of the ex-works price of the product

–

Sugar syrups and sugar preparations in packages greater than 2 kilograms, not put up for retail sale

Manufacture:

–

from materials of any heading, except that of the product, and

–

in which all the materials of headings 1701 and 1702 used are wholly obtained

ex Chapter 22

Beverages, spirits and vinegar; except for:

Manufacture:

–

from materials of any heading, except that of the product, and

–

in which all the grapes or materials derived from grapes used are wholly obtained

2202

Waters, including mineral waters and aerated waters, containing added sugar or other sweetening matter or flavoured, and other non-alcoholic beverages, not including fruit, nut or vegetable juices of heading 2009

Manufacture:

–

from materials of any heading, except that of the product,

–

in which the value of all the materials of Chapter 17 used does not exceed 30 per cent of the ex-works price of the product, and

–

in which all the materials of headings 0401 to 0406 used are wholly obtained

2207

Undenatured ethyl alcohol of an alcoholic strength by volume of 80 per cent vol or higher; ethyl alcohol and other spirits, denatured, of any strength

Manufacture:

–

from materials of any heading, except those of heading 1703 , 2207 or 2208 , and

–

in which all the grapes or materials derived from grapes used are wholly obtained

2208

Undenatured ethyl alcohol of an alcoholic strength by volume of less than 80 per cent vol; spirits, liqueurs and other spirituous beverages

Manufacture:

–

from materials of any heading, except those of heading 2207 or 2208 , and

–

in which all the grapes or materials derived from grapes used are wholly obtained

ex Chapter 23

Residues and waste from the food industries; prepared animal fodder; except for:

Manufacture from materials of any heading, except that of the product

ex ex 2301

Whale meal; flours, meals and pellets of fish or of crustaceans, molluscs or other aquatic invertebrates, unfit for human consumption

Manufacture in which all the materials of Chapters 2 and 3 used are wholly obtained

ex ex 2303

Residues from the manufacture of starch from maize (excluding concentrated steeping liquors), of a protein content, calculated on the dry product, exceeding 40 per cent by weight

Manufacture in which all the maize used is wholly obtained

2304

Oil-cake and other solid residues, whether or not ground or in the form of pellets resulting from the extraction of soya-bean oil

Manufacture from materials of any heading, except those of headings 1201 , 1204 , 1205 , 1206 and 1207

2306

Oil-cake and other solid residues, whether or not ground or in the form of pellets, resulting from the extraction of vegetable or microbial fats or oils, other than those of heading 2304 or 2305 :

–

Oil cake and other solid residues resulting from the extraction of olive oil, containing more than 3 per cent by weight of olive oil

Manufacture in which all the olives of Chapter 7 used are wholly obtained

–

Other

Manufacture from materials of any heading, except those of headings 1201 , 1204 , 1205 , 1206 and 1207

2309

Preparations of a kind used in animal feeding

Manufacture in which:

–

the weight of all the materials from heading 1006 , Chapter 11 and headings 2302 and 2303 used does not exceed 20 per cent of the total weight of the product,

–

all the sugar, molasses or milk used are originating, and

–

all the materials of Chapter 3 used are wholly obtained

ex Chapter 24

Tobacco and manufactured tobaccosubstitutes; products, whether or not containing nicotine, intended for inhalation without combustion; other nicotine containing products intended for the intake of nicotine into the human body; except for:

Manufacture in which all the materials of Chapter 24 used are wholly obtained

2402

Cigars, cheroots, cigarillos and cigarettes, of tobacco or of tobacco substitutes

Manufacture in which at least 70 per cent by weight of the unmanufactured tobacco or tobacco refuse of heading 2401 used is originating

ex ex 2403

Smoking tobacco

Manufacture in which at least 70 per cent by weight of the unmanufactured tobacco or tobacco refuse of heading 2401 used is originating

2404.11

Products intended for inhalation without combustion containing tobacco or reconstituted tobacco

Manufacture in which all the materials of Chapter 24 used are wholly obtained

2404.12

Products intended for inhalation without combustion containing nicotine

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

2404.19

Products intended for inhalation without combustion containing:

–

tobacco substitutes

–

other

Manufacture in which all the materials of Chapter 24 used are wholly obtained

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

2404.91

Other nicotine containing products intended for the intake of nicotine into the human body for oral application

Manufacture

–

from materials of any heading except that of the product, and

–

in which the value of all the materials of Chapter 17 used does not exceed 30 per cent of the ex-works price of the product

2404.92

Other nicotine containing products intended for the intake of nicotine into the human body for transdermal application

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

2404.99

Other nicotine containing products intended for the intake of nicotine into the human body other than inhalation without combustion, oral or transdermal application

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

ex Chapter 25

Salt; sulphur; earths and stone; plastering materials, lime and cement, except for:

Manufacture from materials of any heading, except that of the product

ex ex 2504

Natural crystalline graphite, with enriched carbon content, purified and ground

Enriching of the carbon content, purifying and grinding of crude crystalline graphite

ex ex 2515

Marble, merely cut, by sawing or otherwise, into blocks or slabs of a rectangular (including square) shape, of a thickness not exceeding25 cm

Cutting, by sawing or otherwise, of marble (even if already sawn) of a thickness exceeding25 cm

ex ex 2516

Granite, porphyry, basalt, sandstone and other monumental or building stone, merely cut, by sawing or otherwise, into blocks or slabs of a rectangular (including square) shape, of a thickness not exceeding25 cm

Cutting, by sawing or otherwise, of stone (even if already sawn) of a thickness exceeding25 cm

ex ex 2518

Calcined dolomite

Calcination of dolomite not calcined

ex ex 2519

Crushed natural magnesium carbonate (magnesite), in hermetically-sealed containers, and magnesium oxide, whether or not pure, other than fused magnesia or dead-burned (sintered) magnesia

Manufacture from materials of any heading, except that of the product. However, natural magnesium carbonate (magnesite) may be used

ex ex 2520

Plasters specially prepared for dentistry

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

ex ex 2524

Natural asbestos fibres

Manufacture from asbestos concentrate

ex ex 2525

Mica powder

Grinding of mica or mica waste

ex ex 2530

Earth colours, calcined or powdered

Calcination or grinding of earth colours

Chapter 26

Ores, slag and ash

Manufacture from materials of any heading, except that of the product

ex Chapter 27

Mineral fuels, mineral oils and products of their distillation; bituminous substances; mineral waxes; except for:

Manufacture from materials of any heading, except that of the product

ex ex 2707

Oils in which the weight of the aromatic constituents exceeds that of the non-aromatic constituents, being oils similar to mineral oils obtained by distillation of high temperature coal tar, of which more than 65 per cent by volume distils at a temperature of up to 250  o C (including mixtures of petroleum spirit and benzole), for use as power or heating fuels

Operations of refining and/or one or more specific process(es)  ( 8 )

or

Other operations in which all the materials used are classified within a heading other than that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 per cent of the ex-works price of the product

ex ex 2709

Crude oils obtained from bituminous minerals

Destructive distillation of bituminous materials

2710

Petroleum oils and oils obtained from bituminous minerals, other than crude; preparations not elsewhere specified or included, containing by weight 70 per cent or more of petroleum oils or of oils obtained from bituminous minerals, these oils being the basic constituents of the preparations; waste oils

Operations of refining and/or one or more specific process(es)  ( 9 )

or

Other operations in which all the materials used are classified within a heading other than that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 per cent of the ex-works price of the product

2711

Petroleum gases and other gaseous hydrocarbons

Operations of refining, liquefaction and/or one or more specific process(es)  ( 10 )

or

Other operations in which all the materials used are classified within a heading other than that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 per cent of the ex-works price of the product

2712

Petroleum jelly; paraffin wax, microcrystalline petroleum wax, slack wax, ozokerite, lignite wax, peat wax, other mineral waxes, and similar products obtained by synthesis or by other processes, whether or not coloured

Operations of refining and/or one or more specific process(es)  ( 11 )

or

Other operations in which all the materials used are classified within a heading other than that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 per cent of the ex-works price of the product

2713

Petroleum coke, petroleum bitumen and other residues of petroleum oils or of oils obtained from bituminous minerals

Operations of refining and/or one or more specific process(es)  ( 12 )

or

Other operations in which all the materials used are classified within a heading other than that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 per cent of the ex-works price of the product

2714

Bitumen and asphalt, natural; bituminous or oil shale and tar sands; asphaltites and asphaltic rocks

Operations of refining and/or one or more specific process(es)  ( 13 )

or

Other operations in which all the materials used are classified within a heading other than that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 per cent of the ex-works price of the product

2715

Bituminous mixtures based on natural asphalt, on natural bitumen, on petroleum bitumen, on mineral tar or on mineral tar pitch(for example, bituminous mastics, cut-backs)

Operations of refining and/or one or more specific process(es)  ( 14 )

or

Other operations in which all the materials used are classified within a heading other than that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 per cent of the ex-works price of the product

ex Chapter 28

Inorganic chemicals; organic or inorganic compounds of precious metals, of rare-earth metals, of radioactive elements or of isotopes, except for:

Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 per cent of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

ex ex 2805

“Mischmetall”

Manufacture by electrolytic or thermal treatment in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

ex ex 2811

Sulphur trioxide

Manufacture from sulphur dioxide

Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

ex ex 2833

Aluminium sulphate

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

ex ex 2840

Sodium perborate

Manufacture from disodium tetraborate pentahydrate

Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

ex ex 2852

–

Mercury compounds of internal ethers and their halogenated, sulphonated, nitrated or nitrosated derivatives

Manufacture from materials of any heading. However, the value of all the materials of heading 2909 used shall not exceed 20 per cent of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

–

Mercury compounds of nucleic acids and their salts, whether or not chemically defined; other heterocyclic mercury compounds

Manufacture from materials of any heading. However, the value of all the materials of headings 2852 , 2932 , 2933 and 2934 used shall not exceed 20 per cent of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

–

Other albumines, albuminates and other albumin derivatives, containing mercury compounds

Manufacture from materials of any heading except that of the product. However, materials of the same heading as the product may be used provided that their total value does not exceed 20 per cent of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

–

Other chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included, containing mercury compounds

Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 per cent of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

ex Chapter 29

Organic chemicals; except for:

Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 per cent of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

ex ex 2901

Acyclic hydrocarbons for use as power or heating fuels

Operations of refining and/or one or more specific process(es)  ( 15 )

or

Other operations in which all the materials used are classified within a heading other than that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 per cent of the ex-works price of the product

ex ex 2902

Cyclanes and cyclenes (other than azulenes), benzene, toluene, xylenes, for use as power or heating fuels

Operations of refining and/or one or more specific process(es)  ( 16 )

or

Other operations in which all the materials used are classified within a heading other than that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 per cent of the ex-works price of the product

ex ex 2905

Metal alcoholates of alcohols of this heading and of ethanol

Manufacture from materials of any heading, including other materials of heading 2905 . However, metal alcoholates of this heading may be used, provided that their total value does not exceed 20 per cent of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

2915

Saturated acyclic monocarboxylic acids and their anhydrides, halides, peroxides and peroxyacids; their halogenated, sulphonated, nitrated or nitrosated derivatives

Manufacture from materials of any heading. However, the value of all the materials of headings 2915 and 2916 used shall not exceed 20 per cent of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

ex ex 2930

Dithiocarbonates (xanthates and xanthogenates)

Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 per cent of the ex-works price of the product

ex ex 2932

–

Internal ethers and their halogenated, sulphonated, nitrated or nitrosated derivatives

Manufacture from materials of any heading. However, the value of all the materials of heading 2909 used shall not exceed 20 per cent of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

–

Cyclic acetals and internal hemiacetals and their halogenated, sulphonated, nitrated or nitrosated derivatives

Manufacture from materials of any heading

Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

2933

Heterocyclic compounds with nitrogen hetero-atom(s) only

Manufacture from materials of any heading. However, the value of all the materials of headings 2932 and 2933 used shall not exceed 20 per cent of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

2934

Nucleic acids and their salts, whether or not chemically defined; other heterocyclic compounds

Manufacture from materials of any heading. However, the value of all the materials of headings 2932 , 2933 and 2934 used shall not exceed 20 per cent of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

ex ex 2939

Concentrates of poppy straw containing not less than 50 per cent by weight of alkaloids

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

ex Chapter 30

Pharmaceutical products; except for:

Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 per cent of the ex-works price of the product

3002

Human blood; animal blood prepared for therapeutic, prophylactic or diagnostic uses; antisera, other blood fractions and immunological products, whether or not modified or obtained by means of biotechnological processes; vaccines, toxins, cultures of micro-organisms (excluding yeasts) and similar products; cell cultures, whether or not modified:

–

Products consisting of two or more constituents which have been mixed together for therapeutic or prophylactic uses or unmixed products for these uses, put up in measured doses or in forms or packings for retail sale

Manufacture from materials of any heading, including other materials of heading 3002 . However, materials of the same description as the product may be used, provided that their total value does not exceed 20 per cent of the ex-works price of the product

–

Other:

– –

Human blood

Manufacture from materials of any heading, including other materials of heading 3002 . However, materials of the same description as the product may be used, provided that their total value does not exceed 20 per cent of the ex-works price of the product

– –

Animal blood prepared for therapeutic or prophylactic uses

Manufacture from materials of any heading, including other materials of heading 3002 . However, materials of the same description as the product may be used, provided that their total value does not exceed 20 per cent of the ex-works price of the product

– –

Blood fractions other than antisera, haemoglobin, blood globulins and serum globulins

Manufacture from materials of any heading, including other materials of heading 3002 . However, materials of the same description as the product may be used, provided that their total value does not exceed 20 per cent of the ex-works price of the product

– –

Haemoglobin, blood globulins and serum globulins

Manufacture from materials of any heading, including other materials of heading 3002 . However, materials of the same description as the product may be used, provided that their total value does not exceed 20 per cent of the ex-works price of the product

– –

Other

Manufacture from materials of any heading, including other materials of heading 3002 . However, materials of the same description as the product may be used, provided that their total value does not exceed 20 per cent of the ex-works price of the product

–

Other carboxyimide-function compounds (including saccharin and its salts) and imine-function compounds, complying with Note 2 to Chapter 30 of the Harmonized System

Manufacture from materials of any heading except that of the product. However, materials of the same heading as the product may be used provided that their total value does not exceed 20 per cent of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

–

Other heterocyclic compounds with nitrogen hetero-atom(s) only, containing an unfused imidazole ring (whether or not hydrogenated) in the structure, complying with Note 2 to Chapter 30 of the Harmonized System

Manufacture from materials of any heading. However, the value of all the materials of headings 2932 and 2933 used shall not exceed 20 per cent of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

–

Other nucleic acids and their salts, whether or not chemically defined, complying with Note 2 to Chapter 30 of the Harmonized System; other heterocyclic compounds, complying with Note 2 to Chapter 30 of the Harmonized System

Manufacture from materials of any heading. However, the value of all the materials of headings 2932 , 2933 and 2934 used shall not exceed 20 per cent of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

–

Other hormones, prostaglandins, thromboxanes and leukotrienes, natural or reproduced by synthesis, complying with Note 2 to Chapter 30 of the Harmonized System; derivatives and structural analogues thereof, including chain modified polypeptides, used primarily as hormones, complying with Note 2 to Chapter 30 of the Harmonized System

Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 per cent of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

–

Other polyethers, in primary forms, complying with Note 2 to Chapter 30 of the Harmonized System

Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 per cent of the ex-works price of the product,

or

Manufacture from polycarbonate of tetrabromo (bisphenol A) of subheading 3907.40

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

3003 and 3004

Medicaments (excluding products of heading 3002 , 3005 or 3006 ):

–

Obtained from amikacin of heading 2941

Manufacture from materials of any heading, except that of the product. However, materials of headings 3003 and 3004 may be used, provided that their total value does not exceed 20 per cent of the ex-works price of the product

–

Other

Manufacture:

–

from materials of any heading, except that of the product. However, materials of headings 3003 and 3004 may be used, provided that their total value does not exceed 20 per cent of the ex-works price of the product, and

–

in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

ex ex 3006

–

Waste pharmaceuticals specified in note 4(k) to this Chapter

The origin of the product in its original classification shall be retained

–

Sterile surgical or dental adhesion barriers, whether or not absorbable:

– –

made of plastics

Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 per cent of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 25 per cent of the ex-works price of the product

– –

made of fabrics

Manufacture from  ( 17 ) :

–

natural fibres

–

man-made staple fibres, not carded or combed or otherwise processed for spinning,

or

–

chemical materials or textile pulp

–

Appliances identifiable for ostomy use

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

Placebos and blinded (or double-blinded) clinical trial kits for a recognised clinical trial, put up in measured doses:

–

if made of sugar,

Manufacture:

–

from materials of any heading, except that of the product, and

–

in which the value of all the materials of Chapter 17 used does not exceed 50 per cent of the ex-works price of the product

–

if made of starch or other foodstuff

Manufacture from materials of any heading, except that of the product

–

if in liquid form for oral intake

Manufacture:

–

from materials of any heading, except that of the product, and

–

in which all the materials of headings 0401 to 0406 used are wholly obtained

–

if kits containing medicaments; and

Manufacture:

–

from materials of any heading, except that of the product. However, materials of headings 3003 and 3004 may be used, provided that their total value does not exceed 20 per cent of the ex works price of the product, and

–

in which the value of all the materials used does not exceed 50 per cent of the ex works price of the product

–

if containing other chemicals.

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

Chapter 31

Fertilisers

Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 per cent of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

ex Chapter 32

Tanning or dyeing extracts; tannins and their derivatives; dyes, pigments and other colouring matter; paints and varnishes; putty and other mastics; inks; except for:

Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 per cent of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

3204

Synthetic organic colouring matter, whether or not chemically defined; preparations as specified in note 3 to this chapter based on synthetic organic colouring matter; synthetic organic products of a kind used as fluorescent brightening agents or as luminophores, whether or not chemically defined

Manufacture from materials of any heading

3206

Other colouring matter; preparations as specified in note 3 to this chapter, other than those of heading 3203 , 3204 or 3205 ; inorganic products of a kind used as luminophores, whether or not chemically defined

Manufacture from materials of any heading

ex Chapter 33

Essential oils and resinoids; perfumery, cosmetic or toilet preparations; except for:

Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 per cent of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

3301

Essential oils (terpeneless or not), including concretes and absolutes; resinoids; extracted oleoresins; concentrates of essential oils in fats, in fixed oils, in waxes or the like, obtained by enfleurage or maceration; terpenic by-products of the deterpenation of essential oils; aqueous distillates and aqueous solutions of essential oils

Manufacture from materials of any heading, including materials of a different “group”  ( 18 ) in this heading. However, materials of the same group as the product may be used, provided that their total value does not exceed 20 per cent of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

ex ex 3302

Preparations based on odoriferous substances that contain more than 5 per cent of weight in sugar, of a kind used in the food or drink industries

Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 per cent of the ex-works price of the product

ex Chapter 34

Soap, organic surface-active agents, washing preparations, lubricating preparations, artificial waxes, prepared waxes, polishing or scouring preparations, candles and similar articles, modelling pastes, “dental waxes” and dental preparations with a basis of plaster; except for:

Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 per cent of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

ex ex 3403

Lubricating preparations containing less than 70 per cent by weight of petroleum oils or oils obtained from bituminous minerals

Operations of refining and/or one or more specific process(es)  ( 19 )

or

Other operations in which all the materials used are classified within a heading other than that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 per cent of the ex-works price of the product

3404

Artificial waxes and prepared waxes:

–

With a basis of paraffin, petroleum waxes, waxes obtained from bituminous minerals, slack wax or scale wax

Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 per cent of the ex-works price of the product

–

Other

Manufacture from materials of any heading, except for:

–

hydrogenated oils having the character of waxes of heading 1516 ,

–

fatty acids not chemically defined or industrial fatty alcohols having the character of waxes of heading 3823 , and

–

materials of heading 3404 .

However, these materials may be used, provided that their total value does not exceed 20 per cent of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

ex Chapter 35

Albuminoidal substances; modified starches; glues; enzymes; except for:

Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 per cent of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

ex ex 3502

Egg albumin

Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 per cent of the ex-works price of the product

3505

Dextrins and other modified starches (for example, pregelatinised or esterified starches); glues based on starches, or on dextrins or other modified starches

Manufacture from materials of any heading, including other materials of heading 3505

Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

ex ex 3507

Prepared enzymes not elsewhere specified or included

Manufacture from materials of any heading, except that of the product

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

Chapter 36

Explosives; pyrotechnic products; matches; pyrophoric alloys; certain combustible preparations

Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 per cent of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

ex Chapter 37

Photographic or cinematographic goods; except for:

Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 per cent of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

3701

Photographic plates and film in the flat, sensitised, unexposed, of any material other than paper, paperboard or textiles; instant print film in the flat, sensitised, unexposed, whether or not in packs:

–

Instant print film for colour photography, in packs

Manufacture from materials of any heading, except those of headings 3701 and 3702 . However, materials of heading 3702 may be used, provided that their total value does not exceed 30 per cent of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

–

Other

Manufacture from materials of any heading, except those of headings 3701 and 3702 . However, materials of headings 3701 and 3702 may be used, provided that their total value does not exceed 20 per cent of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

3702

Photographic film in rolls, sensitised, unexposed, of any material other than paper, paperboard or textiles; instant print film in rolls, sensitised, unexposed

Manufacture from materials of any heading, except those of headings 3701 and 3702

Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

3704

Photographic plates, film paper, paperboard and textiles, exposed but not developed

Manufacture from materials of any heading, except those of headings 3701 to 3704

Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

ex Chapter 38

Miscellaneous chemical products; except for:

Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 per cent of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

ex ex 3801

–

Colloidal graphite in suspension in oil and semi-colloidal graphite; carbonaceous pastes for electrodes

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

–

Graphite in paste form, being a mixture of more than 30 per cent by weight of graphite with mineral oils

Manufacture in which the value of all the materials of heading 3403 used does not exceed 20 per cent of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

ex ex 3803

Refined tall oil

Refining of crude tall oil

Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

ex ex 3805

Spirits of sulphate turpentine, purified

Purification by distillation or refining of raw spirits of sulphate turpentine

Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

ex ex 3806

Salts of rosin, of resin acids or of derivatives of rosin or resin acids, (other than salts of rosin adducts); ester gums

Manufacture from rosins and resin acids

Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

ex ex 3807

Wood pitch(wood tar pitch)

Distillation of wood tar

Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

3808

Insecticides, rodenticides, fungicides, herbicides, anti-sprouting products and plant-growth regulators, disinfectants and similar products, put up in forms or packings for retail sale or as preparations or articles(for example, sulphur-treated bands, wicks and candles, and fly-papers)

Manufacture from materials of any heading, except that of the product

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

3809

Finishing agents, dye carriers to accelerate the dyeing or fixing of dyestuffs and other products and preparations (for example, dressings and mordants), of a kind used in the textile, paper, leather or like industries, not elsewhere specified or included:

–

With a basis of amylaceous substances

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

–

Other

Manufacture from materials of any heading, except that of the product

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

3810

Pickling preparations for metal surfaces; fluxes and other auxiliary preparations for soldering, brazing or welding; soldering, brazing or welding powders and pastes consisting of metal and other materials; preparations of a kind used as cores or coatings for welding electrodes or rods

Manufacture from materials of any heading, except that of the product

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

3811

Anti-knock preparations, oxidation inhibitors, gum inhibitors, viscosity improvers, anti-corrosive preparations and other prepared additives, for mineral oils (including gasoline) or for other liquids used for the same purposes as mineral oils:

–

Prepared additives for lubricating oil, containing petroleum oils or oils obtained from bituminous minerals

Manufacture in which the value of all the materials of heading 3811 used does not exceed 50 per cent of the ex-works price of the product

–

Other

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

3812

Prepared rubber accelerators; compound plasticisers for rubber or plastics, not elsewhere specified or included; anti-oxidising preparations and other compound stabilizers for rubber or plastics

Manufacture from materials of any heading, except that of the product

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

3813

Preparations and charges for fire-extinguishers; charged fire-extinguishing grenades

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

3814

Organic composite solvents and thinners, not elsewhere specified or included; prepared paint or varnish removers

Manufacture from materials of any heading, except that of the product

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

ex ex 3816

Dolomite ramming mix

Manufacture from materials of any heading, except that of the product

3818

Chemical elements doped for use in electronics, in the form of discs, wafers or similar forms; chemical compounds doped for use in electronics

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

3819

Hydraulic brake fluids and other prepared liquids for hydraulic transmission, not containing or containing less than 70 per cent by weight of petroleum oils or oils obtained from bituminous minerals

Manufacture from materials of any heading, except that of the product

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

3820

Anti-freezing preparations and prepared de-icing fluids

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

ex ex 3821

Prepared culture media for the development or maintenance of micro-organisms (including viruses and the like) or of plant, human or animal cells

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

3822

Diagnostic or laboratory reagents on a backing, prepared diagnostic or laboratory reagents whether or not on a backing, whether or not put up in the form of kits, other than those of heading 3006 ; certified reference materials, except for:

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

–

- For malaria

– –

For blood-grouping

Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 per cent of the ex-works price of the product

– –

For Zika and other diseases transmitted by mosquitoes of the genus Aedes

– –

Other

Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 per cent of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

3823

Industrial monocarboxylic fatty acids; acid oils from refining; industrial fatty alcohols:

–

Industrial monocarboxylic fatty acids, acid oils from refining

Manufacture from materials of any heading, except that of the product

–

Industrial fatty alcohols

Manufacture from materials of any heading, including other materials of heading 3823

3824

Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included:

–

The following of this heading:

– –

Prepared binders for foundry moulds or cores based on natural resinous products

– –

Naphthenic acids, their water-insoluble salts and their esters

– –

Sorbitol other than that of heading 2905

– –

Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts

– –

Ion exchangers

– –

Getters for vacuum tubes

– –

Alkaline iron oxide for the purification of gas

Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 per cent of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

– –

Ammoniacal gas liquors and spent oxide produced in coal gas purification

– –

Sulphonaphthenic acids, their water-insoluble salts and their esters

– –

Fusel oil and Dippel’s oil

– –

Mixtures of salts having different anions

– –

Copying pastes with a basis of gelatin, whether or not on a paper or textile backing

–

Other

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

3826

–

Biodiesel: mixtures of mono alkyl esters of the fatty acids of the long chain of sub products of vegetable and animal oils. For greater certainty, the mono alkyl ester makes reference to methyl ester or ethyl ester of fatty acids

Manufacture

–

from materials of any heading, except that of the product, and

–

in which all the materials of Chapter 15 used are wholly obtained  ( 20 )

–

Other

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

3827

Mixtures containing halogenated derivatives of methane, ethane or propane, not elsewhere specified or included.

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

ex Chapter 39

Plastics and articles thereof

Manufacture from materials of any heading, except that of the product

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

3907

–

Copolymer, made from polycarbonate and acrylonitrile-butadiene-styrene copolymer (ABS); polyethers of subheading 3907.20 except polyacetals; epoxide resins of subheading 3907.30; polycarbonates of subheading 3907.40; unsaturated polyesters of subheading 3907.91

Manufacture from materials of any heading

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

–

Other

Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 per cent of the ex-works price of the product, or

Manufacture from polycarbonate of tetrabromo (bisphenol A) of subheading 3907.40

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

3915

Waste, parings and scrap, of plastics

Manufacture from materials of any heading, except that of the product

3920

Other plates, sheets, film, foil and strip, of plastics, non-cellular and not reinforced, laminated, supported or similarly combined with other materials

Manufacture from materials of any heading, except that of the product  ( 21 )

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

ex Chapter 40

Rubber and articles thereof; except for:

Manufacture from materials of any heading, except that of the product

Manufacture in which the value of all the materials used does not exceed 60 per cent of the ex works price of the product

ex ex 4001

Laminated slabs of crepe rubber for shoes

Lamination of sheets of natural rubber

4004

Waste, parings and scrap of rubber (other than hard rubber) and powders and granules obtained therefrom

Manufacture from materials of any heading, except that of the product

4005

Compounded rubber, unvulcanised, in primary forms or in plates, sheets or strip

Manufacture in which the value of all the materials used, except natural rubber, does not exceed 50 per cent of the ex-works price of the product

4012

Retreaded or used pneumatic tyres of rubber; solid or cushion tyres, tyre treads and tyre flaps, of rubber:

–

Retreaded pneumatic, solid or cushion tyres, of rubber

Retreading of used tyres

–

Other

Manufacture from materials of any heading, except those of headings 4011 and 4012

ex ex 4017

Articles of hard rubber

Manufacture from hard rubber

ex Chapter 41

Raw hides and skins (other than furskins) and leather; except for:

Manufacture from materials of any heading, except that of the product

ex ex 4102

Raw skins of sheep or lambs, without wool on

Removal of wool from sheep or lamb skins, with wool on

4104 to 4106

Tanned or crust hides and skins, without wool or hair on, whether or not split, but not further prepared

Retanning of tanned leather

or

Manufacture from materials of any heading, except that of the product

ex ex 4114

Patent leather and patent laminated leather; metallised leather

Manufacture from materials of headings 4104 to 4106 , 4107 , 4112 or 4113 , provided that their total value does not exceed 50 per cent of the ex works price of the product

Chapter 42

Articles of leather; saddlery and harness; travel goods, handbags and similar containers; articles of animal gut(other than silk worm gut)

Manufacture from materials of any heading, except that of the product

ex Chapter 43

Furskins and artificial fur; manufactures thereof; except for:

Manufacture from materials of any heading, except that of the product

ex ex 4302

Tanned or dressed furskins, assembled:

–

Plates, crosses and similar forms

Bleaching or dyeing, in addition to cutting and assembly of non-assembled tanned or dressed furskins

–

Other

Manufacture from non-assembled, tanned or dressed furskins

4303

Articles of apparel, clothing accessories and other articles of furskin

Manufacture from non-assembled tanned or dressed furskins of heading 4302

ex Chapter 44

Wood and articles of wood; wood charcoal; except for:

Manufacture from materials of any heading, except that of the product

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

ex ex 4403

Wood roughly squared

Manufacture from wood in the rough, whether or not stripped of its bark or merely roughed down

ex ex 4407

Wood sawn or chipped lengthwise, sliced or peeled, of a thickness exceeding 6 mm, planed, sanded or end-jointed

Planing, sanding or end-jointing

ex ex 4408

Sheets for veneering (including those obtained by slicing laminated wood) and for plywood, of a thickness not exceeding 6 mm, spliced, and other wood sawn lengthwise, sliced or peeled of a thickness not exceeding 6 mm, planed, sanded or end-jointed

Splicing, planing, sanding or end-jointing

ex ex 4409

Wood continuously shaped along any of its edges, ends or faces, whether or not planed, sanded or end-jointed:

–

Sanded or end-jointed

Sanding or end-jointing

–

Beadings and mouldings

Beading or moulding

ex ex 4410 to ex ex 4413

Beadings and mouldings, including moulded skirting and other moulded boards

Beading or moulding

ex ex 4415

Packing cases, boxes, crates, drums and similar packings, of wood

Manufacture from boards not cut to size

ex ex 4416

Casks, barrels, vats, tubs and other coopers’ products and parts thereof, of wood

Manufacture from riven staves, not further worked than sawn on the two principal surfaces

ex ex 4418

–

Builders’ joinery and carpentry of wood

Manufacture from materials of any heading, except that of the product. However, cellular wood panels, shingles and shakes may be used

–

Beadings and mouldings

Beading or moulding

ex ex 4421

Match splints; wooden pegs or pins for footwear

Manufacture from wood of any heading, except drawn wood of heading 4409

ex Chapter 45

Cork and articles of cork; except for:

Manufacture from materials of any heading, except that of the product

4503

Articles of natural cork

Manufacture from cork of heading 4501

Chapter 46

Manufactures of straw, of esparto or of other plaiting materials; basketware and wickerwork

Manufacture from materials of any heading, except that of the product

Chapter 47

Pulp of wood or of other fibrous cellulosic material; recovered (waste and scrap) paper or paperboard

Manufacture from materials of any heading, except that of the product

ex Chapter 48

Paper and paperboard; articles of paper pulp, of paper or of paperboard; except for:

Manufacture from materials of any heading, except that of the product

ex ex 4811

Paper and paperboard, ruled, lined or squared only

Manufacture from paper-making materials of Chapter 47

4816

Carbon paper, self-copy paper and other copying or transfer papers (other than those of heading 4809 ), duplicator stencils and offset plates, of paper, whether or not put up in boxes

Manufacture from paper-making materials of Chapter 47

4817

Envelopes, letter cards, plain postcards and correspondence cards, of paper or paperboard; boxes, pouches, wallets and writing compendiums, of paper or paperboard, containing an assortment of paper stationery

Manufacture:

–

from materials of any heading, except that of the product, and

–

in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

ex ex 4818

Toilet paper

Manufacture from paper-making materials of Chapter 47

ex ex 4819

Cartons, boxes, cases, bags and other packing containers, of paper, paperboard, cellulose wadding or webs of cellulose fibres

Manufacture:

–

from materials of any heading, except that of the product, and

–

in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

ex ex 4820

Letter pads

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

ex ex 4823

Other paper, paperboard, cellulose wadding and webs of cellulose fibres, cut to size or shape

Manufacture from paper-making materials of Chapter 47

ex Chapter 49

Printed books, newspapers, pictures and other products of the printing industry; manuscripts, typescripts and plans; except for:

Manufacture from materials of any heading, except that of the product

4909

Printed or illustrated postcards; printed cards bearing personal greetings, messages or announcements, whether or not illustrated, with or without envelopes or trimmings

Manufacture from materials of any heading, except those of headings 4909 and 4911

4910

Calendars of any kind, printed, including calendar blocks:

–

Calendars of the “perpetual” type or with replaceable blocks mounted on bases other than paper or paperboard

Manufacture:

–

from materials of any heading, except that of the product, and

–

in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

–

Other

Manufacture from materials of any heading, except those of headings 4909 and 4911

ex Chapter 50

Silk; except for:

Manufacture from materials of any heading, except that of the product

ex ex 5003

Silk waste (including cocoons unsuitable for reeling, yarn waste and garnetted stock), carded or combed

Carding or combing of silk waste

5004 to ex ex 5006

Silk yarn and yarn spun from silk waste

Manufacture from  ( 22 ) :

–

raw silk or silk waste, carded or combed or otherwise prepared for spinning,

–

other natural fibres, not carded or combed or otherwise prepared for spinning,

–

chemical materials or textile pulp, or

–

paper-making materials

5007

Woven fabrics of silk or of silk waste:

–

Incorporating rubber thread

Manufacture from single yarn  ( 23 )

–

Other

Manufacture from  ( 24 ) :

–

coir yarn,

–

natural fibres,

–

man-made staple fibres, not carded or combed or otherwise prepared for spinning,

–

elastomeric yarns from headings 5402 and 5404

–

chemical materials or textile pulp, or

–

paper

or

Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling), provided that the value of the unprinted fabric used does not exceed 47,5  per cent of the ex-works price of the product

ex Chapter 51

Wool, fine or coarse animal hair; horsehair yarn and woven fabric; except for:

Manufacture from materials of any heading, except that of the product

5106 to 5110

Yarn of wool, of fine or coarse animal hair or of horsehair

Manufacture from  ( 25 ) :

–

raw silk or silk waste, carded or combed or otherwise prepared for spinning,

–

natural fibres, not carded or combed or otherwise prepared for spinning,

–

chemical materials or textile pulp, or

–

paper-making materials

5111 to 5113

Woven fabrics of wool, of fine or coarse animal hair or of horsehair:

–

Incorporating rubber thread

Manufacture from single yarn  ( 26 )

–

Other

Manufacture from  ( 27 ) :

–

coir yarn,

–

natural fibres,

–

tops of wool, of fine or coarse animal hair or of horsehair of heading 5105

–

man-made staple fibres, not carded or combed or otherwise prepared for spinning,

–

elastomeric yarns from headings 5402 and 5404

–

chemical materials or textile pulp, or

–

paper

or

Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling), provided that the value of the unprinted fabric used does not exceed 47,5 per cent of the ex-works price of the product

ex Chapter 52

Cotton; except for:

Manufacture from materials of any heading, except that of the product

5204 to 5207

Yarn and thread of cotton

Manufacture from  ( 28 ) :

–

raw silk or silk waste, carded or combed or otherwise prepared for spinning,

–

natural fibres, not carded or combed or otherwise prepared for spinning,

–

chemical materials or textile pulp, or

–

paper-making materials

5208 to 5212

Woven fabrics of cotton:

–

Incorporating rubber thread

Manufacture from single yarn  ( 29 )

–

Other

Manufacture from  ( 30 ) :

–

coir yarn,

–

natural fibres,

–

man-made staple fibres, not carded or combed or otherwise prepared for spinning,

–

elastomeric yarns from headings 5402 and 5404

–

chemical materials or textile pulp, or

–

paper

or

Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling), provided that the value of the unprinted fabric used does not exceed 47,5  per cent of the ex-works price of the product

ex Chapter 53

Other vegetable textile fibres; paper yarn and woven fabrics of paper yarn; except for:

Manufacture from materials of any heading, except that of the product

5306 to 5308

–

Yarn of other vegetable textile fibres; paper yarn

Manufacture from  ( 31 ) :

–

raw silk or silk waste, carded or combed or otherwise prepared for spinning,

–

natural fibres, not carded or combed or otherwise prepared for spinning,

–

chemical materials or textile pulp, or

–

paper-making materials

5309 to 5311

Woven fabrics of other vegetable textile fibres; woven fabrics of paper yarn:

–

Incorporating rubber thread

Manufacture from single yarn  ( 32 ) :

–

Other

Manufacture from  ( 33 ) :

–

coir yarn,

–

natural fibres,

–

man-made staple fibres, not carded or combed or otherwise prepared for spinning,

–

elastomeric yarns from headings 5402 and 5404 ,

–

chemical materials or textile pulp, or

–

paper

or

Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling), provided that the value of the unprinted fabric used does not exceed 47,5  per cent of the ex-works price of the product

5401 to 5406

Yarn, monofilament and thread of man-made filaments

Manufacture from  ( 34 ) :

–

raw silk or silk waste, carded or combed or otherwise prepared for spinning,

–

natural fibres, not carded or combed or otherwise prepared for spinning,

–

chemical materials or textile pulp, or

–

paper-making materials

5407 and 5408

Woven fabrics of synthetic or artificial filament yarn:

–

Incorporating rubber thread

Manufacture from single yarn  ( 35 )

–

Other

Manufacture from  ( 36 ) :

–

coir yarn,

–

natural fibres,

–

man-made staple fibres, not carded or combed or otherwise prepared for spinning,

–

elastomeric yarns from headings 5402 and 5404 ,

–

chemical materials or textile pulp, or

–

paper

or

Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling), provided that the value of the unprinted fabric used does not exceed 47,5  per cent of the ex-works price of the product

5501 to 5507

Man-made staple fibres

Manufacture from chemical materials or textile pulp

5508 to 5511

Yarn and sewing thread of man-made staple fibres

Manufacture from  ( 37 ) :

–

raw silk or silk waste, carded or combed or otherwise prepared for spinning,

–

natural fibres, not carded or combed or otherwise prepared for spinning,

–

chemical materials or textile pulp, or

–

paper-making materials

5512 to 5516

Woven fabrics of man-made staple fibres:

–

Incorporating rubber thread

Manufacture from single yarn  ( 38 ) :

–

Other

Manufacture from  ( 39 ) :

–

coir yarn,

–

natural fibres,

–

man-made staple fibres, not carded or combed or otherwise prepared for spinning,

–

elastomeric yarns from headings 5402 and 5404 ,

–

chemical materials or textile pulp, or

–

paper

or

Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling), provided that the value of the unprinted fabric used does not exceed 47,5  per cent of the ex-works price of the product

ex Chapter 56

Wadding, felt and non-wovens; special yarns; twine, cordage, ropes and cables and articles thereof; except for:

Manufacture from  ( 40 ) :

–

coir yarn,

–

natural fibres,

–

elastomeric yarns from headings 5402 and 5404 ,

–

chemical materials or textile pulp, or

–

paper-making materials

5602

Felt, whether or not impregnated, coated, covered or laminated:

–

Needleloom felt

Manufacture from  ( 41 ) :

–

natural fibres, or

–

chemical materials or textile pulp

However:

–

polypropylene filament of heading 5402 ,

–

polypropylene fibres of heading 5503 or 5506 , or

–

polypropylene filament tow of heading 5501 ,

of which the denomination in all cases of a single filament or fibre is less than 9 decitex, may be used, provided that their total value does not exceed 40 per cent of the ex-works price of the product

–

Other

Manufacture from  ( 42 ) :

–

natural fibres,

–

man-made staple fibres made from casein, or

–

chemical materials or textile pulp

5604

Rubber thread and cord, textile covered; textile yarn, and strip and the like of heading 5404 or 5405 , impregnated, coated, covered or sheathed with rubber or plastics:

–

Rubber thread and cord, textile covered

Manufacture from rubber thread or cord, not textile covered

–

Other

Manufacture from  ( 43 ) :

–

natural fibres, not carded or combed or otherwise processed for spinning,

–

chemical materials or textile pulp, or

–

paper-making materials

5605

Metallised yarn, whether or not gimped, being textile yarn, or strip or the like of heading 5404 or 5405 , combined with metal in the form of thread, strip or powder or covered with metal

Manufacture from  ( 44 ) :

–

natural fibres,

–

man-made staple fibres, not carded or combed or otherwise processed for spinning,

–

chemical materials or textile pulp, or

–

paper-making materials

5606

–

Gimped yarn, and strip and the like of heading 5404 or 5405 , gimped (other than those of heading 5605 and gimped horsehair yarn); chenille yarn (including flock chenille yarn); loop wale-yarn

Manufacture from  ( 45 ) :

–

natural fibres,

–

man-made staple fibres, not carded or combed or otherwise processed for spinning,

–

chemical materials or textile pulp, or

–

paper-making materials

–

Gimped yarn associated to elastomeric yarn

Manufacture from yarn

ex 5607.50 and 5608

Twine and nets

Manufacture from  ( 46 )

( 47 ) :

–

coir yarn,

–

natural fibres,

–

elastomeric yarns from headings 5402 and 5404 ,

–

chemical materials or textile pulp, or

–

paper-making materials

Chapter 57

Carpets and other textile floor coverings:

–

Of needleloom felt

Manufacture from  ( 48 ) :

–

natural fibres, or

–

chemical materials or textile pulp

However:

–

polypropylene filament of heading 5402 ,

–

polypropylene fibres of heading 5503 or 5506 , or

–

polypropylene filament tow of heading 5501 ,

of which the denomination in all cases of a single filament or fibre is less than 9 decitex, may be used, provided that their total value does not exceed 40 per cent of the ex-works price of the product

Jute fabric may be used as a backing

–

Of other felt

Manufacture from  ( 49 ) :

–

natural fibres, not carded or combed or otherwise processed for spinning, or

–

chemical materials or textile pulp

–

Other

Manufacture from  ( 50 ) :

–

coir yarn or jute yarn,

–

synthetic or artificial filament yarn,

–

natural fibres, or

–

man-made staple fibres, not carded or combed or otherwise processed for spinning

Jute fabric may be used as a backing

ex Chapter 58

Special woven fabrics; tufted textile fabrics; lace; tapestries; trimmings; embroidery, except for:

–

Combined with rubber thread

Manufacture from single yarn  ( 51 )

–

Other

Manufacture from  ( 52 ) :

–

natural fibres,

–

man-made staple fibres, not carded or combed or otherwise processed for spinning, or

–

elastomeric yarns from headings 5402 and 5404 ,

–

chemical materials or textile pulp

or

Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling), provided that the value of the unprinted fabric used does not exceed 47,5  per cent of the ex-works price of the product

5805

Hand-woven tapestries of the types Gobelins, Flanders, Aubusson, Beauvais and the like, and needle-worked tapestries (for example, petit point, cross stitch), whether or not made up

Manufacture from materials of any heading, except that of the product

5810

Embroidery in the piece, in strips or in motifs

Manufacture:

–

from materials of any heading, except that of the product, and

–

in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

5901

Textile fabrics coated with gum or amylaceous substances, of a kind used for the outer covers of books or the like; tracing cloth; prepared painting canvas; buckram and similar stiffened textile fabrics of a kind used for hat foundations

Manufacture from yarn

5902

Tyre cord fabric of high tenacity yarn of nylon or other polyamides, polyesters or viscose rayon:

–

Containing not more than 90 per cent by weight of textile materials

Manufacture from yarn

–

Other

Manufacture from chemical materials or textile pulp. However, elastomeric yarns from headings 5402 and 5404 may be used

5903

Textile fabrics impregnated, coated, covered or laminated with plastics, other than those of heading 5902

Manufacture from yarn

or

Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, rasing, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling), provided that the value of the unprinted fabric used does not exceed 47,5  per cent of the ex-works price of the product

5904

Linoleum, whether or not cut to shape; floor coverings consisting of a coating or covering applied on a textile backing, whether or not cut to shape

Manufacture from yarn  ( 53 )

5905

Textile wall coverings:

–

Impregnated, coated, covered or laminated with rubber, plastics or other materials

Manufacture from yarn

–

Other

Manufacture from  ( 54 ) :

–

coir yarn,

–

natural fibres,

–

man-made staple fibres, not carded or combed or otherwise processed for spinning, or

–

chemical materials or textile pulp

or

Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling), provided that the value of the unprinted fabric used does not exceed 47,5  per cent of the ex-works price of the product

5906

Rubberised textile fabrics, other than those of heading 5902 :

–

Knitted or crocheted fabrics

Manufacture from  ( 55 ) :

–

natural fibres,

–

man-made staple fibres, not carded or combed or otherwise processed for spinning, or

–

chemical materials or textile pulp

–

Other fabrics made of synthetic filament yarn, containing more than 90 per cent by weight of textile materials

Manufacture from chemical materials

–

Other

Manufacture from yarn

5907

Textile fabrics otherwise impregnated, coated or covered; painted canvas being theatrical scenery, studio back-cloths or the like

Manufacture from yarn

or

Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, rasing, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling), provided that the value of the unprinted fabric used does not exceed 47,5  per cent of the ex-works price of the product

5908

Textile wicks, woven, plaited or knitted, for lamps, stoves, lighters, candles or the like; incandescent gas mantles and tubular knitted gas mantle fabric therefor, whether or not impregnated:

–

Incandescent gas mantles, impregnated

Manufacture from tubular knitted gas-mantle fabric

–

Other

Manufacture from materials of any heading, except that of the product

5909 to 5911

Textile articles of a kind suitable for industrial use:

–

Polishing discs or rings other than of felt of heading 5911

Manufacture from yarn or waste fabrics or rags of heading 6310

–

Woven fabrics, of a kind commonly used in papermaking or other technical uses, felted or not, whether or not impregnated or coated, tubular or endless with single or multiple warp and/or weft, or flat woven with multiple warp and/or weft of heading 5911

Manufacture from  ( 56 ) :

–

coir yarn,

–

the following materials:

– –

yarn of polytetrafluoroethylene  ( 57 ) ,

– –

yarn, multiple, of polyamide, coated impregnated or covered with a phenolic resin,

– –

yarn of synthetic textile fibres of aromatic polyamides, obtained by polycondensation of m-phenylenediamine and isophthalic acid,

– –

monofil of polytetrafluoroethylene  ( 58 ) ,

– –

yarn of synthetic textile fibres of poly (p-phenylene terephthalamide),

– –

glass fibre yarn, coated with phenol resin and gimped with acrylic yarn  ( 59 ) ,

– –

copolyester monofilaments of a polyester and a resin of terephthalic acid and 1,4 -cyclohexanediethanol and isophthalic acid,

– –

natural fibres,

– –

man-made staple fibres not carded or combed or otherwise processed for spinning, or

– –

chemical materials or textile pulp

–

Other

Manufacture from  ( 60 ) :

–

coir yarn,

–

natural fibres,

–

man-made staple fibres, not carded or combed or otherwise processed for spinning, or

–

chemical materials or textile pulp

Chapter 60

Knitted or crocheted fabrics

Manufacture from  ( 61 ) :

–

natural fibres,

–

man-made staple fibres, not carded or combed or otherwise processed for spinning,

–

elastomeric yarns from headings 5402 and 5404 , or

–

chemical materials or textile pulp

Chapter 61

Articles of apparel and clothing accessories, knitted or crocheted:

–

Obtained by sewing together or otherwise assembling, two or more pieces of knitted or crocheted fabric which have been either cut to form or obtained directly to form

Manufacture from yarn  ( 62 )

( 63 )

–

Other

Manufacture from  ( 64 )

( 65 ) :

–

natural fibres,

–

man-made staple fibres, not carded or combed or otherwise processed for spinning, or

–

chemical materials or textile pulp

ex Chapter 62

Articles of apparel and clothing accessories, not knitted or crocheted; except for:

Manufacture from yarn  ( 66 )

( 67 )

ex ex 6202 , ex ex 6204 , ex ex 6206 , ex ex 6209 and ex ex 6211

Women’s, girls’ and babies’ clothing and clothing accessories for babies, embroidered

Manufacture from yarn  ( 68 )

or

Manufacture from unembroidered fabric, provided that the value of the unembroidered fabric used does not exceed 40 per cent of the ex-works price of the product  ( 69 )

ex ex 6210 and ex ex 6216

Fire-resistant equipment of fabric covered with foil of aluminised polyester

Manufacture from yarn  ( 70 )

or

Manufacture from uncoated fabric, provided that the value of the uncoated fabric used does not exceed 40 per cent of the ex-works price of the product  ( 71 )

6213 and 6214

Handkerchiefs, shawls, scarves, mufflers, mantillas, veils and the like:

–

Embroidered

Manufacture from unbleached single yarn  ( 72 )

( 73 )

or

Manufacture from unembroidered fabric, provided that the value of the unembroidered fabric used does not exceed 40 per cent of the ex-works price of the product  ( 74 )

–

Other

Manufacture from unbleached single yarn  ( 75 )

( 76 )

or

Making up, followed by printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling), provided that the value of all the unprinted products of headings 6213 and 6214 used does not exceed 47,5  per cent of the ex-works price of the product

6217

Other made up clothing accessories; parts of garments or of clothing accessories, other than those of heading 6212 :

–

Embroidered

Manufacture from yarn  ( 77 )

or

Manufacture from unembroidered fabric, provided that the value of the unembroidered fabric used does not exceed 40 per cent of the ex-works price of the product  ( 78 )

–

Fire-resistant equipment of fabric covered with foil of aluminised polyester

Manufacture from yarn  ( 79 )

or

Manufacture from uncoated fabric, provided that the value of the uncoated fabric used does not exceed 40 per cent of the ex-works price of the product  ( 80 )

–

Interlinings for collars and cuffs, cut out

Manufacture:

–

from materials of any heading, except that of the product, and

–

in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

–

Other

Manufacture from yarn  ( 81 )

ex Chapter 63

Other made-up textile articles; sets; worn clothing and worn textile articles; rags; except for:

Manufacture from materials of any heading, except that of the product

6301 to 6304

Blankets, travelling rugs, bed linen etc.; curtains etc.; other furnishing articles:

–

Of felt, of nonwovens

Manufacture  ( 82 ) :

–

natural fibres, or

–

chemical materials or textile pulp

–

Other:

– –

Embroidered

Manufacture from unbleached single yarn  ( 83 )

( 84 )

or

Manufacture from unembroidered fabric (other than knitted or crocheted), provided that the value of the unembroidered fabric used does not exceed 40 per cent of the ex-works price of the product

– –

Other

Manufacture from unbleached single yarn  ( 85 )

( 86 )

6305

Sacks and bags, of a kind used for the packing of goods

Manufacture from  ( 87 ) :

–

natural fibres,

–

man-made staple fibres, not carded or combed or otherwise processed for spinning, or

–

chemical materials or textile pulp

6306

Tarpaulins, awnings and sunblinds; tents (including temporary canopies and similar articles); sails for boats, sailboards or landcraft; camping goods:

–

Of nonwovens

Manufacture from  ( 88 )

( 89 ) :

–

natural fibres, or

–

chemical materials or textile pulp

–

Other

Manufacture from unbleached single yarn  ( 90 )

( 91 )

6307

Other made-up articles, including dress patterns

Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

6308

Sets consisting of woven fabric and yarn, whether or not with accessories, for making up into rugs, tapestries, embroidered table cloths or serviettes, or similar textile articles, put up in packings for retail sale

Each item in the set must satisfy the rule which would apply to it if it were not included in the set. However, non-originating articles may be incorporated, provided that their total value does not exceed 15 per cent of the ex-works price of the set

6401

Waterproof footwear with outer soles and uppers of rubber or of plastics, the uppers of which are neither fixed to the sole nor assembled by stitching, riveting, nailing, screwing, plugging or similar processes

Manufacture from materials of any heading, except from assemblies of uppers affixed to inner soles or to other sole components of heading 6406

6402

Other footwear with outer soles and uppers of rubber or plastics

–

Sports footwear; footwear with upper straps or thongs assembled to the sole by means of plugs

– –

With a customs value above 8 euros

Manufacture from materials of any heading, except from assemblies of uppers affixed to inner soles or to other sole components of heading 6406

– –

With a customs value of 8 euros or less

Manufacture in which the uppers of footwear of heading 6406 used are originating

–

Other

– –

With a customs value above 11 euros

Manufacture from materials of any heading, except from assemblies of uppers affixed to inner soles or to other sole components of heading 6406

– –

With a customs value of 11 euros or less

Manufacture in which the uppers of footwear of heading 6406 used are originating

6403

Footwear with outer soles of rubber, plastics, leather or composition leather and uppers of leather

–

With a customs value above 24 euros

Manufacture from materials of any heading, except from assemblies of uppers affixed to inner soles or to other sole components of heading 6406

–

With a customs value of 24 euros or less

Manufacture in which the uppers of footwear of heading 6406 used are originating

6404

Footwear with outer soles of rubber, plastics, leather or composition leather and uppers of textile materials

–

With a customs value above 14 euros

Manufacture from materials of any heading, except from assemblies of uppers affixed to inner soles or to other sole components of heading 6406

–

With a customs value of 14 euros or less

Manufacture in which the uppers of footwear of heading 6406 used are originating

6405

Other footwear

–

With uppers of rubber or plastics

– –

With a customs value above 11 euros

Manufacture from materials of any heading, except from assemblies of uppers affixed to inner soles or to other sole components of heading 6406

– –

With a customs value of 11 euros or less

Manufacture in which the uppers of footwear of heading 6406 used are originating

–

With uppers of leather or composition leather

– –

With a customs value above 24 euros

Manufacture from materials of any heading, except from assemblies of uppers affixed to inner soles or to other sole components of heading 6406

– –

With a customs value of 24 euros or less

Manufacture in which the uppers of footwear of heading 6406 used are originating

–

With uppers of textile materials

– –

With a customs value above 14 euros

Manufacture from materials of any heading, except from assemblies of uppers affixed to inner soles or to other sole components of heading 6406

– –

With a customs value of 14 euros or less

Manufacture in which the uppers of footwear of heading 6406 used are originating

–

Others

Manufacture in which the uppers of footwear of heading 6406 used are originating

6406

Parts of footwear (including uppers whether or not attached to soles other than outer soles); removable in-soles, heel cushions and similar articles; gaiters, leggings and similar articles, and parts thereof

Manufacture from materials of any heading, except that of the product

ex Chapter 65

Headgear and parts thereof; except for:

Manufacture from materials of any heading, except that of the product

6505

Hats and other headgear, knitted or crocheted, or made up from lace, felt or other textile fabric, in the piece (but not in strips), whether or not lined or trimmed; hair-nets of any material, whether or not lined or trimmed

Manufacture from yarn or textile fibres  ( 92 )

ex Chapter 66

Umbrellas, sun umbrellas, walking-sticks, seat-sticks, whips, riding-crops, and parts thereof; except for:

Manufacture from materials of any heading, except that of the product

6601

Umbrellas and sun umbrellas(including walking-stick umbrellas, garden umbrellas and similar umbrellas)

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

Chapter 67

Prepared feathers and down and articles made of feathers or of down; artificial flowers; articles of human hair

Manufacture from materials of any heading, except that of the product

ex Chapter 68

Articles of stone, plaster, cement, asbestos, mica or similar materials; except for:

Manufacture from materials of any heading, except that of the product

ex ex 6803

Articles of slate or of agglomerated slate

Manufacture from worked slate

ex ex 6812

Articles of asbestos; articles of mixtures with a basis of asbestos or of mixtures with a basis of asbestos and magnesium carbonate

Manufacture from materials of any heading

ex ex 6814

Articles of mica, including agglomerated or reconstituted mica, on a support of paper, paperboard or other materials

Manufacture from worked mica(including agglomerated or reconstituted mica)

ex Chapter 69

Ceramic products; except for:

Manufacture from materials of any heading, except that of the product

ex ex 6907

Glazed ceramic flags and paving, hearth or wall tiles; glazed ceramic mosaic cubes and the like, whether or not on a backing

Manufacture from materials of any heading, except that of the product

Manufacture from unglazed ceramic flags and paving, hearth or wall tiles, or unglazed ceramic mosaic cubes and the like, whether or not on a backing

ex Chapter 70

Glass and glassware; except for:

Manufacture from materials of any heading, except that of the product

ex ex 7003 , ex ex 7004 and ex ex 7005

Glass with a non-reflecting layer

Manufacture from materials of heading 7001

7006

Glass of heading 7003 , 7004 or 7005 , bent, edge-worked, engraved, drilled, enamelled or otherwise worked, but not framed or fitted with other materials:

–

Glass-plate substrates, coated with a dielectric thin film, and of a semiconductor grade in accordance with SEMII-standards  ( 93 )

Manufacture from non-coated glass-plate substrate of heading 7006

–

Other

Manufacture from materials of heading 7001

7008

Multiple-walled insulating units of glass

Manufacture from materials of heading 7001

7009

Glass mirrors, whether or not framed, including rear-view mirrors

Manufacture from materials of any heading, except that of the product

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

7010

Carboys, bottles, flasks, jars, pots, phials, ampoules and other containers, of glass, of a kind used for the conveyance or packing of goods; preserving jars of glass; stoppers, lids and other closures, of glass

Manufacture from materials of any heading, except that of the product

or

Cutting of glassware, provided that the total value of the uncut glassware used does not exceed 50 per cent of the ex-works price of the product

7013

Glassware of a kind used for table, kitchen, toilet, office, indoor decoration or similar purposes(other than that of heading 7010 or 7018 )

Manufacture from materials of any heading, except that of the product

or

Cutting of glassware, provided that the total value of the uncut glassware used does not exceed 50 per cent of the ex-works price of the product

or

Hand-decoration (except silk-screen printing) of hand-blown glassware, provided that the total value of the hand-blown glassware used does not exceed 50 per cent of the ex-works price of the product

ex ex 7019

Articles (other than yarn) of glass fibres

Manufacture from:

–

uncoloured slivers, rovings, yarn or chopped strands of heading 7019 , or

–

glass wool

ex Chapter 71

Natural or cultured pearls, precious or semi-precious stones, precious metals, metals clad with precious metal, and articles thereof; imitation jewellery; coin; except for:

Manufacture from materials of any heading, except that of the product

ex ex 7101

Natural or cultured pearls, graded and temporarily strung for convenience of transport

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

ex ex 7102 , ex ex 7103 and ex ex 7104

Worked precious or semi-precious stones(natural, synthetic or reconstructed)

Manufacture from unworked precious or semi-precious stones

7106 , 7108 and 7110

Precious metals:

–

Unwrought

Manufacture from materials of any heading, except those of headings 7106 , 7108 and 7110

or

Electrolytic, thermal or chemical separation of precious metals of heading 7106 , 7108 or 7110

or

Alloying of precious metals of heading 7106 , 7108 or 7110 with each other or with base metals

–

Semi-manufactured or in powder form

Manufacture from unwrought precious metals

ex ex 7107 , ex ex 7109 and ex ex 7111

Metals clad with precious metals, semi-manufactured

Manufacture from metals clad with precious metals, unwrought

7113 to 7115

Articles of jewellery and other manufactures

Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 per cent of the ex-works price of the product

7116

Articles of natural or cultured pearls, precious or semi-precious stones(natural, synthetic or reconstructed)

Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 per cent of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

7117

Imitation jewellery

Manufacture from materials of any heading, except that of the product

or

Manufacture from base metal parts, not plated or covered with precious metals, provided that the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

ex Chapter 72

Iron and steel; except for:

Manufacture from materials of any heading, except that of the product  ( 94 )

7207

Semi-finished products of iron or non-alloy steel

Manufacture from materials of heading 7201 , 7202 , 7203 , 7204 , 7205 or 7206

7208 to 7216

Flat-rolled products, bars and rods, angles, shapes and sections of iron or non-alloy steel

Manufacture from ingots or other primary forms or semi-finished products of heading 7206 or 7207

7217

Wire of iron or non-alloy steel

Manufacture from semi-finished products of heading 7207

7218.91 and 7218.99

Semi-finished products

Manufacture from materials of heading 7201 , 7202 , 7203 , 7204 , 7205 or 7218.10

7219  to 7222

Flat-rolled products, bars and rods, angles, shapes and sections of stainless steel

Manufacture from ingots or other primary forms or semi-finished products of heading 7218

7223

Wire of stainless steel

Manufacture from semi-finished products of heading 7218

7224.90

Semi-finished products

Manufacture from materials of heading 7201 , 7202 , 7203 , 7204 , 7205 or 7224.10

7225  to 7228

Flat-rolled products, hot rolled bars and rods, in irregularly wound coils; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel

Manufacture from ingots or other primary forms or semi-finished products of heading 7206 , 7207 , 7218 or 7224

7229

Wire of other alloy steel

Manufacture from semi-finished products of heading 7224

ex Chapter 73

Articles of iron or steel; except for:

Manufacture from materials of any heading, except that of the product  ( 95 )

ex ex 7301

Sheet piling

Manufacture from materials of heading 7206

7302

Railway or tramway track construction material of iron or steel, the following: rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers (cross-ties), fish-plates, chairs, chair wedges, sole plates (base plates), rail clips, bedplates, ties and other material specialised for jointing or fixing rails

Manufacture from materials of heading 7206

7304 , 7305 and 7306

Tubes, pipes and hollow profiles, of iron (other than cast iron) or steel

Manufacture from materials of heading 7206 , 7207 , 7218 or 7224

ex ex 7307

Tube or pipe fittings of stainless steel (ISO No X5CrNiMo 1712 ), consisting of several parts

Turning, drilling, reaming, threading, deburring and sandblasting of forged blanks, provided that the total value of the forged blanks used does not exceed 35 per cent of the ex-works price of the product

7308

Structures (excluding prefabricated buildings of heading 9406 ) and parts of structures (for example, bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns), of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel

Manufacture from materials of any heading, except that of the product. However, welded angles, shapes and sections of heading 7301 may not be used

ex ex 7315

Skid chain

Manufacture in which the value of all the materials of heading 7315 used does not exceed 50 per cent of the ex-works price of the product

ex Chapter 74

Copper and articles thereof; except for:

Manufacture from materials of any heading, except that of the product

7403

Refined copper and copper alloys, unwrought

Manufacture from materials of any heading

ex Chapter 75

Nickel and articles thereof; except for:

Manufacture:

–

from materials of any heading, except that of the product, and

–

in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

7501 to 7503

Nickel mattes, nickel oxide sinters and other intermediate products of nickel metallurgy; unwrought nickel; nickel waste and scrap

Manufacture from materials of any heading, except that of the product

ex Chapter 76

Aluminium and articles thereof; except for:

Manufacture from materials of any heading, except that of the product

7601

Unwrought aluminium

Manufacture:

–

from materials of any heading, except that of the product, and

–

in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

or

Manufacture by thermal or electrolytic treatment from unalloyed aluminium or waste and scrap of aluminium

7604 to 7606

Aluminium bars, rods and profiles, wire, plates and sheets

Manufacture:

–

from materials of any heading, except that of the product, and

–

in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

7607

Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2  mm.

Manufacture from materials of any heading, except those of headings 7606 and 7607

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

7608 to 7609

Aluminium tubes and pipes, or tube or pipe fittings(for example, couplings, elbows, sleeves)

Manufacture:

–

from materials of any heading, except that of the product, and

–

in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

ex ex 7616

Aluminium articles other than gauze, cloth, grill, netting, fencing, reinforcing fabric and similar materials (including endless bands) of aluminium wire, and expanded metal of aluminium

Manufacture:

–

from materials of any heading, except that of the product. However, gauze, cloth, grill, netting, fencing, reinforcing fabric and similar materials (including endless bands) of aluminium wire, or expanded metal of aluminium may be used; and

–

in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

Chapter 77

Reserved for possible future use in the HS

ex Chapter 78

Lead and articles thereof; except for:

Manufacture:

–

from materials of any heading, except that of the product, and

–

in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

7801

Unwrought lead:

–

Refined lead

Manufacture from “bullion” or “work” lead

–

Other

Manufacture from materials of any heading, except that of the product. However, waste and scrap of heading 7802 may not be used

7802

Lead waste and scrap

Manufacture from materials of any heading, except that of the product

ex ex 7806

Lead tubes, pipes and tube or pipe fittings

Manufacture from materials of any heading, except that of the product

ex Chapter 79

Zinc and articles thereof; except for:

Manufacture:

–

from materials of any heading, except that of the product, and

–

in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

7901

Unwrought zinc

Manufacture from materials of any heading, except that of the product. However, waste and scrap of heading 7902 may not be used

7902

Zinc waste and scrap

Manufacture from materials of any heading, except that of the product

ex ex 7907

Zinc tubes, pipes and tube or pipe fittings

Manufacture from materials of any heading, except that of the product

ex Chapter 80

Tin and articles thereof; except for:

Manufacture:

–

from materials of any heading, except that of the product, and

–

in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

8001

Unwrought tin

Manufacture from materials of any heading, except that of the product. However, waste and scrap of heading 8002 may not be used

8002 and 8007

Tin waste and scrap; other articles of tin

Manufacture from materials of any heading, except that of the product

Chapter 81

Other base metals; cermets; articles thereof

–

Other base metals, wrought; articles thereof:

Manufacture in which the value of all the materials of the same heading as the product used does not exceed 50 per cent of the ex-works price of the product

–

Other

Manufacture from materials of any heading, except that of the product

ex Chapter 82

Tools, implements, cutlery, spoons and forks, of base metal; parts thereof of base metal; except for:

Manufacture from materials of any heading, except that of the product

8206

Tools of two or more of the headings 8202 to 8205 , put up in sets for retail sale

Manufacture from materials of any heading, except those of headings 8202 to 8205 . However, tools of headings 8202 to 8205 may be incorporated into the set, provided that their total value does not exceed 15 per cent of the ex-works price of the set

ex ex 8211

Knives with cutting blades, serrated or not (including pruning knives), other than knives of heading 8208

Manufacture from materials of any heading, except that of the product. However, knife blades and handles of base metal may be used

8214

Other articles of cutlery (for example, hair clippers, butchers’ or kitchen cleavers, choppers and mincing knives, paper knives); manicure or pedicure sets and instruments(including nail files)

Manufacture from materials of any heading, except that of the product. However, handles of base metal may be used

8215

Spoons, forks, ladles, skimmers, cake-servers, fish-knives, butter-knives, sugar tongs and similar kitchen or tableware

Manufacture from materials of any heading, except that of the product. However, handles of base metal may be used

ex Chapter 83

Miscellaneous articles of base metal; except for:

Manufacture from materials of any heading, except that of the product

ex ex 8301

Locks

Manufacture from materials of any heading, except that of the product

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

ex ex 8302

–

Other mountings, fittings and similar articles suitable for buildings, and automatic door closers

Manufacture from materials of any heading, except that of the product. However, other materials of heading 8302 may be used, provided that their total value does not exceed 20 per cent of the ex-works price of the product

–

Other mountings, fittings and similar articles suitable for motor vehicles

Manufacture from materials of any heading, except that of the product

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

–

Hinges and parts thereof designed for motor vehicles

Manufacture from materials of any heading, except that of the product

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

ex ex 8306

Statuettes and other ornaments, of base metal

Manufacture from materials of any heading, except that of the product. However, other materials of heading 8306 may be used, provided that their total value does not exceed 30 per cent of the ex-works price of the product

ex Chapter 84

Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof, except for:

Manufacture from materials of any heading, except that of the product

Manufacture in which the value of all the materials used does not exceed 60 per cent of the ex-works price of the product

ex ex 8401

Nuclear fuel elements

Manufacture from materials of any heading, except that of the product

Manufacture in which the value of all the materials used does not exceed 30 per cent of the ex-works price of the product

8406

Steam turbines and other vapour turbines

Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

8407

Spark-ignition reciprocating or rotary internal combustion piston engines

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

8408

Compression-ignition internal combustion piston engines(diesel or semi-diesel engines)

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

8412

Other engines and motors

Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

8417

Industrial or laboratory furnaces and ovens, including incinerators, non-electric

Manufacture from materials of any heading, except that of the product

Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

8420

Calendering or other rolling machines, other than for metals or glass, and cylinders therefore

Manufacture in which:

–

the value of all the materials used does not exceed 40 per cent of the ex-works price of the product, and

–

within the above limit, the value of all the materials of the same heading as the product used does not exceed 25 per cent of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 30 per cent of the ex-works price of the product

8423

Weighing machinery (excluding balances of a sensitivity of 5 cg or better), including weight operated counting or checking machines; weighing machine weights of all kinds

Manufacture:

–

from materials of any heading, except that of the product, and

–

in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 25 per cent of the ex-works price of the product

8426 to 8428

Lifting, handling, loading or unloading machinery

Manufacture in which:

–

the value of all the materials used does not exceed 40 per cent of the ex-works price of the product, and

–

within the above limit, the value of all the materials of heading 8431 used does not exceed 10 per cent of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 30 per cent of the ex-works price of the product

8429

Self-propelled bulldozers, angledozers, graders, levellers, scrapers, mechanical shovels, excavators, shovel loaders, tamping machines and road rollers:

–

Road rollers

Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

–

Other

Manufacture in which:

–

the value of all the materials used does not exceed 40 per cent of the ex-works price of the product, and

–

within the above limit, the value of all the materials of heading 8431 used does not exceed 10 per cent of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 30 per cent of the ex-works price of the product

8430

Other moving, grading, levelling, scraping, excavating, tamping, compacting, extracting or boring machinery, for earth, minerals or ores; pile-drivers and pile-extractors; snow-ploughs and snow-blowers

Manufacture in which:

–

the value of all the materials used does not exceed 40 per cent of the ex-works price of the product, and

–

within the above limit, the value of all the materials of heading 8431 used does not exceed 10 per cent of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 30 per cent of the ex-works price of the product

ex ex 8431

–

Parts suitable for use solely or principally with road rollers

Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

–

Parts suitable for use solely or principally with the machinery of headings 8427

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

8439

Machinery for making pulp of fibrous cellulosic material or for making or finishing paper or paperboard

Manufacture from materials of any heading, except that of the product

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

ex ex 8443

Printers, for office machines(for example automatic data processing machines, word-processing machines, etc.)

Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

8444 to 8447

Machines of these headings for use in the textile industry

Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

ex ex 8448

Auxiliary machinery for use with machines of headings 8444 and 8445

Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

8452

Sewing machines, other than book-sewing machines of heading 8440 ; furniture, bases and covers specially designed for sewing machines; sewing machine needles:

–

Sewing machines (lock stitch only) with heads of a weight not exceeding 16 kg without motor or 17 kg with motor

Manufacture in which:

–

the value of all the materials used does not exceed 40 per cent of the ex-works price of the product,

–

the value of all the non-originating materials used in assembling the head (without motor) does not exceed the value of all the originating materials used, and

–

the thread-tension, crochet and zigzag mechanisms used are originating

–

Other

Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

ex ex 8456 to 8466

Machine tools and machines and their parts and accessories of headings 8456 to 8466

Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

–

Water-jet cutting machines and its parts

Manufacture from materials of any heading, except that of the product

Manufacture in which the value of all the materials used does not exceed 50per cent of the ex-works price of the product

8470 to 8472

Office machines(for example, typewriters, calculating machines, automatic data processing machines, duplicating machines, stapling machines)

Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

ex ex 8479

Machines and mechanical appliances having individual functions, not specified or included elsewhere in this Chapter, except for:

Manufacture from materials of any heading, except that of the product

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

–

Machinery for the extraction or preparation of microbial fats and oils

Manufacture from materials of any heading, except that of the product

Manufacture in which the value of all the materials used does not exceed 60 per cent of the ex-works price of the product

8480

Moulding boxes for metal foundry; mould bases; moulding patterns; moulds for metal (other than ingot moulds), metal carbides, glass, mineral materials, rubber or plastics

Manufacture from materials of any heading, except that of the product

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

8481

Taps, cocks, valves and similar appliances for pipes, boiler shells, tanks, vats or the like, including pressure-reducing valves and thermostatically controlled valves

Manufacture from materials of any heading, except that of the product

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

8482

Ball or roller bearings; and parts thereof

Manufacture:

–

from materials of any heading, except that of the product, and

–

in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 25 per cent of the ex-works price of the product

ex ex 8486

–

Machine tools for working any material by removal of material, by laser or other light or photon beam, ultrasonic, electrodischarge, electrochemical, electron beam, ionic-beam or plasma arc processes and parts and accessories thereof

–

machine tools (including presses) for working metal by bending, folding, straightening, flattening, and parts and accessories thereof

–

machine tools for working stone, ceramics, concrete, asbestos-cement or like mineral materials or for cold working glass and parts and accessories thereof

–

marking-out instruments which are pattern generating apparatus of a kind used for producing masks or reticles from photoresist coated substrates; parts and accessories thereof

Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

–

moulds, injection or compression types

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

–

lifting, handing, loading or unloading machinery

Manufacture in which:

–

the value of all the materials used does not exceed 40 per cent of the ex-works price of the product, and

–

within the above limit, the value of all the materials of heading 8431 used does not exceed 10 per cent of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 30 per cent of the ex-works price of the product

ex Chapter 85

Electrical machinery and equipment and parts thereof; sound recorders and reproducers, television image and sound recorders and reproducers, and parts and accessories of such articles; except for:

Manufacture from materials of any heading, except that of the product

Manufacture in which the value of all the materials used does not exceed 60 per cent of the ex-works price of the product

8501

Electric motors and generators(excluding generating sets)

Manufacture in which:

–

the value of all the materials used does not exceed 40 per cent of the ex-works price of the product, and

–

within the above limit, the value of all the materials of heading 8503 used does not exceed 10 per cent of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 30 per cent of the ex-works price of the product

8502

Electric generating sets and rotary converters

Manufacture in which:

–

the value of all the materials used does not exceed 40 per cent of the ex-works price of the product, and

–

within the above limit, the value of all the materials of headings 8501 and 8503 used does not exceed 10 per cent of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 30 per cent of the ex-works price of the product

8503

Parts suitable for use solely or principally with the machines of heading 8501  or 8502

Manufacture from materials of any heading, except that of the product

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

ex ex 8504

Power supply units for automatic data-processing machines

Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

8509

Electromechanical domestic appliances, with self-contained electric motor other than vacuum cleaners of heading 8508 ; parts thereof

Manufacture from materials of any heading, except that of the product

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

8516

Electric instantaneous or storage water heaters and immersion heaters; electric space heating apparatus and soil heating apparatus; electrothermic hair-dressing apparatus (for example, hair dryers, hair curlers, curling tong heaters) and hand dryers; electric smoothing irons; other electrothermic appliances of a kind used for domestic purposes; electric heating resistors, other than those of heading 8545

Manufacture from materials of any heading, except that of the product

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

ex ex 8517

Other apparatus for the transmission or reception of voice, images or other data, including apparatus for communication in a wireless network (such as a local or wide area network), other than transmission or reception apparatus of headings 8443 , 8525 , 8527 or 8528

Manufacture in which:

–

the value of all the materials used does not exceed 40 per cent of the ex-works price of the product, and

–

the value of all the non-originating materials used does not exceed the value of all the originating materials used

Manufacture in which the value of all the materials used does not exceed 25 per cent of the ex-works price of the product

8519

Sound recording or sound reproducing apparatus

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

8521

Video recording or reproducing apparatus, whether or not incorporating a video tuner

Manufacture in which:

–

the value of all the materials used does not exceed 40 per cent of the ex-works price of the product, and

–

the value of all the non-originating materials used does not exceed the value of all the originating materials used

Manufacture in which the value of all the materials used does not exceed 30 per cent of the ex-works price of the product

8522

Parts and accessories suitable for use solely or principally with the apparatus of headings 8519 or 8521

Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

8523

–

Unrecorded discs, tapes, solid-state non-volatile storage devices and other media for the recording of sound or of other phenomena, but excluding products of Chapter 37;

Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

–

recorded discs, tapes solid-state non-volatile storage devices and other media for the recording of sound or of other phenomena, but excluding products of Chapter 37

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

–

matrices and masters for the production of discs, but excluding products of Chapter 37;

Manufacture in which:

–

the value of all the materials used does not exceed 40 per cent of the ex-works price of the product, and

–

within the above limit, the value of all the materials of heading 8523 used does not exceed 10 per cent of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 30 per cent of the ex-works price of the product

–

proximity cards and “smart cards” with two or more electronic integrated circuits

Manufacture:

–

from materials of any heading, except that of the product, and

–

in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 30 per cent of the ex-works price of the product

–

“smart cards” with one electronic integrated circuit

Manufacture in which:

–

the value of all the materials used does not exceed 40 per cent of the ex-works price of the product, and

–

within the above limit, the value of all the materials of headings 8541 and 8542 used does not exceed 10 per cent of the ex-works price of the product

or

The operation of diffusion, in which integrated circuits are formed on a semi-conductor substrate by the selective introduction of an appropriate dopant, whether or not assembled and/or tested in a country other than those specified in Articles 3 and 4

Manufacture in which the value of all the materials used does not exceed 25 per cent of the ex-works price of the product

8524

Flat panel display modules, whether or not incorporating touch-sensitive screens

Manufacture from materials of any heading, except that of the product

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

8525

Transmission apparatus for radio-broadcasting or television, whether or not incorporating reception apparatus or sound recording or reproducing apparatus; television cameras, digital cameras and video camera recorders

Manufacture in which:

–

the value of all the materials used does not exceed 40 per cent of the ex-works price of the product, and

–

the value of all the non-originating materials used does not exceed the value of all the originating materials used

Manufacture in which the value of all the materials used does not exceed 25 per cent of the ex-works price of the product

8526

Radar apparatus, radio navigational aid apparatus and radio remote control apparatus

Manufacture in which:

–

the value of all the materials used does not exceed 40 per cent of the ex-works price of the product, and

–

the value of all the non-originating materials used does not exceed the value of all the originating materials used

Manufacture in which the value of all the materials used does not exceed 25 per cent of the ex-works price of the product

8527

Reception apparatus for radio-broadcasting, whether or not combined, in the same housing, with sound recording or reproducing apparatus or a clock

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

8528

Monitors and projectors, not incorporating television reception apparatus; reception apparatus for television, whether or not incorporating radio-broadcast receivers or sound or video recording or reproducing apparatus

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

8529.90

Parts suitable for use solely or principally with the apparatus of headings 8524 to 8528

Manufacture from materials of any heading, except that of the product

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

ex ex 8531

Indicator panels incorporating liquid crystal devices (LCD’s) or light-emitting diodes(LED’s)

Manufacture from materials of any heading, except that of the product

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

8535

Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits (for example, switches, fuses, lightning arresters, voltage limiters, surge suppressors, plugs and other connectors, junctions boxes) for a voltage exceeding 1 000  V

Manufacture in which:

–

the value of all the materials used does not exceed 40 per cent of the ex-works price of the product, and

–

within the above limit, the value of all the materials of heading 8538 used does not exceed 10 per cent of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 30 per cent of the ex-works price of the product

8537

Boards, panels, consoles, desks, cabinets and other bases, equipped with two or more apparatus of heading 8535 or 8536 , for electric control or the distribution of electricity, including those incorporating instruments or apparatus of Chapter 90, and numerical control apparatus, other than switching apparatus of heading 8517

Manufacture from materials of any heading, except that of the product

8539.51

– –

Light-emitting diode (LED) modules

Manufacture from materials of any heading except that of the product

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

ex ex 8540

Cathode-ray television picture tubes, including video monitor cathode-ray tubes

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

ex ex 8541

Diodes, transistors and similar semi-conductor devices, except wafers not yet cut into chips

Manufacture:

–

from materials of any heading, except that of the product, and

–

in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 25 per cent of the ex-works price of the product

8541.51 – 8541.59

Other semiconductor devices

Manufacture from materials of any heading except that of the product

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

ex ex 8542

Electronic integrated circuits

–

monolithic integrated circuits

Manufacture in which:

–

the value of all the materials used does not exceed 40 per cent of the ex-works price of the product, and

–

within the above limit, the value of all the materials of headings 8541 and 8542 used does not exceed 10 per cent of the ex-works price of the product

or

The operation of diffusion, in which integrated circuits are formed on a semi-conductor substrate by the selective introduction of an appropriate dopant, whether or not assembled and/or tested in a country other than those specified in Articles 3 and 4

Manufacture in which the value of all the materials used does not exceed 25 per cent of the ex-works price of the product

–

multichips which are parts of machinery or apparatus, not specified or included elsewhere in this Chapter

Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

–

others

Manufacture in which:

–

the value of all the materials used does not exceed 40 per cent of the ex-works price of the product, and

–

within the above limit, the value of all the materials of headings 8541 and 8542 used does not exceed 10 per cent of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 25 per cent of the ex-works price of the product

ex ex 8543

Electrical machines and apparatus, having individual functions, not specified or included elsewhere in this Chapter except particle accelerators, signal generators, machines and apparatus for electroplating, electrolysis or electrophoresis and parts thereof

Manufacture from materials of any heading, except that of the product

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

8544

Insulated (including enamelled or anodised) wire, cable (including coaxial cable) and other insulated electric conductors, whether or not fitted with connectors; optical fibre cables, made up of individually sheathed fibres, whether or not assembled with electric conductors or fitted with connectors

Manufacture in which the value of all the materials used does not exceed 55 per cent of the ex-works price of the product

8545

Carbon electrodes, carbon brushes, lamp carbons, battery carbons and other articles of graphite or other carbon, with or without metal, of a kind used for electrical purposes

Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

8546

Electrical insulators of any material

Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

8547

Insulating fittings for electrical machines, appliances or equipment, being fittings wholly of insulating materials apart from any minor components of metal (for example, threaded sockets) incorporated during moulding solely for purposes of assembly, other than insulators of heading 8546 ; electrical conduit tubing and joints therefor, of base metal lined with insulating material

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

8548

–

Electrical parts of machinery or apparatus, not specified or included elsewhere in this Chapter

Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

–

Electronic microassemblies

Manufacture in which:

–

the value of all the materials used does not exceed 40 per cent of the ex-works price of the product, and

–

within the above limit, the value of all the materials of headings 8541 and 8542 used does not exceed 10 per cent of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 25 per cent of the ex-works price of the product

ex ex 8549

Electrical and electronic waste and scrap, except for:

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

–

Waste and scrap of primary cells, primary batteries and electric accumulators; spent primary cells, spent primary batteries and spent electric accumulators

Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex works price of the product

ex Chapter 86

Railway or tramway locomotives, rolling-stock and parts thereof; railway or tramway track fixtures and fittings and parts thereof; mechanical (including electro-mechanical) traffic signalling equipment of all kinds; except for:

Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

8608

Railway or tramway track fixtures and fittings; mechanical (including electromechanical) signalling, safety or traffic control equipment for railways, tramways, roads, inland waterways, parking facilities, port installations or airfields; parts of the foregoing

Manufacture:

–

from materials of any heading, except that of the product, and

–

in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 30 per cent of the ex-works price of the product

ex Chapter 87

Vehicles other than railway or tramway rolling-stock, and parts and accessories thereof; except for:

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

8708

Parts and accessories of the motor vehicles

Manufacture from materials of any heading, except that of the product

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

8709

Works trucks, self-propelled, not fitted with lifting or handling equipment, of the type used in factories, warehouses, dock areas or airports for short distance transport of goods; tractors of the type used on railway station platforms; parts of the foregoing vehicles

Manufacture:

–

from materials of any heading, except that of the product, and

–

in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 30 per cent of the ex-works price of the product

8710

Tanks and other armoured fighting vehicles, motorised, whether or not fitted with weapons, and parts of such vehicles

Manufacture:

–

from materials of any heading, except that of the product, and

–

in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 30 per cent of the ex-works price of the product

8711

Motorcycles (including mopeds) and cycles fitted with an auxiliary motor, with or without side-cars; side-cars

Manufacture from materials of any heading, except that of the product

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

8714

Parts and accessories of vehicles of headings 8711 to 8713

Manufacture from materials of any heading, except that of the product

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

8715

Baby carriages and parts thereof

Manufacture:

–

from materials of any heading, except that of the product, and

–

in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 30 per cent of the ex-works price of the product

8716

Trailers and semi-trailers; other vehicles, not mechanically propelled; parts thereof

Manufacture from materials of any heading, except that of the product

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

ex Chapter 88

Aircraft, spacecraft, and parts thereof; except for:

Manufacture from materials of any heading, except that of the product

Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

ex ex 8804

Rotochutes

Manufacture from materials of any heading, including other materials of heading 8804

Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

8805

Aircraft launching gear; deck-arrestor or similar gear; ground flying trainers; parts of the foregoing articles

Manufacture from materials of any heading, except that of the product

Manufacture in which the value of all the materials used does not exceed 30 per cent of the ex-works price of the product

ex ex 8806

Unmanned aircraft with television cameras, digital cameras or video camera recorders

Manufacture in which:

–

the value of all the materials used does not exceed 40 per cent of the ex-works price of the product, and

–

the value of all the non originating materials used does not exceed the value of all the originating materials used

Manufacture in which the value of all the materials used does not exceed 25 per cent of the ex-works price of the product

Chapter 89

Ships, boats and floating structures

Manufacture from materials of any heading, except that of the product. However, hulls of heading 8906 may not be used

Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

ex Chapter 90

Optical, photographic, cinematographic, measuring, checking, precision, medical or surgical instruments and apparatus; parts and accessories thereof; except for:

Manufacture:

–

from materials of any heading, except that of the product, and

–

in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 30 per cent of the ex-works price of the product

9001

Optical fibres and optical fibre bundles; optical fibre cables other than those of heading 8544 ; sheets and plates of polarising material; lenses (including contact lenses), prisms, mirrors and other optical elements, of any material, unmounted, other than such elements of glass not optically worked

Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

9002

Lenses, prisms, mirrors and other optical elements, of any material, mounted, being parts of or fittings for instruments or apparatus, other than such elements of glass not optically worked

Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

9004

Spectacles, goggles and the like, corrective, protective or other

Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

ex ex 9005

Binoculars, monoculars, other optical telescopes, and mountings therefor, except for astronomical refracting telescopes and mountings therefor

Manufacture:

–

from materials of any heading, except that of the product,

–

in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product, and

–

in which the value of all the non-originating materials used does not exceed the value of all the originating materials used

Manufacture in which the value of all the materials used does not exceed 30 per cent of the ex-works price of the product

ex ex 9006

Photographic (other than cinematographic) cameras; photographic flashlight apparatus and flashbulbs other than electrically ignited flashbulbs

Manufacture:

–

from materials of any heading, except that of the product,

–

in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product, and

–

in which the value of all the non-originating materials used does not exceed the value of all the originating materials used

Manufacture in which the value of all the materials used does not exceed 30 per cent of the ex-works price of the product

9007

Cinematographic cameras and projectors, whether or not incorporating sound recording or reproducing apparatus

Manufacture:

–

from materials of any heading, except that of the product,

–

in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product, and

–

in which the value of all the non-originating materials used does not exceed the value of all the originating materials used

Manufacture in which the value of all the materials used does not exceed 30 per cent of the ex-works price of the product

9011

Compound optical microscopes, including those for photomicrography, cinephotomicrography or microprojection

Manufacture:

–

from materials of any heading, except that of the product,

–

in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product, and

–

in which the value of all the non-originating materials used does not exceed the value of all the originating materials used

Manufacture in which the value of all the materials used does not exceed 30 per cent of the ex-works price of the product

ex ex 9014

Other navigational instruments and appliances

Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

9015

Surveying (including photogrammetrical surveying), hydrographic, oceanographic, hydrological, meteorological or geophysical instruments and appliances, excluding compasses; rangefinders

Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

9016

Balances of a sensitivity of 5 cg or better, with or without weights

Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

9017

Drawing, marking-out or mathematical calculating instruments (for example, drafting machines, pantographs, protractors, drawing sets, slide rules, disc calculators); instruments for measuring length, for use in the hand (for example, measuring rods and tapes, micrometers, callipers), not specified or included elsewhere in this chapter

Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

9018

Instruments and appliances used in medical, surgical, dental or veterinary sciences, including scintigraphic apparatus, other electro-medical apparatus and sight-testing instruments:

–

Dentists’ chairs incorporating dental appliances or dentists’ spittoons

Manufacture from materials of any heading, including other materials of heading 9018

Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

–

Other

Manufacture:

–

from materials of any heading, except that of the product, and

–

in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 25 per cent of the ex-works price of the product

9019

Mechano-therapy appliances; massage apparatus; psychological aptitude-testing apparatus; ozone therapy, oxygen therapy, aerosol therapy, artificial respiration or other therapeutic respiration apparatus

Manufacture:

–

from materials of any heading, except that of the product, and

–

in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 25 per cent of the ex-works price of the product

9020

Other breathing appliances and gas masks, excluding protective masks having neither mechanical parts nor replaceable filters

Manufacture:

–

from materials of any heading, except that of the product, and

–

in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 25 per cent of the ex-works price of the product

ex ex 9021

Articles for orthopaedic or fracture appliances and for dental fitting:

–

Nails, tacks, drawing pins, corrugated nails, staples (other than those of heading 8305 ) and similar articles, of iron or steel, whether or not with heads of other material, but excluding such articles with heads of copper

Manufacture from materials of any heading, except that of the product

–

Threaded articles and non-threaded articles of iron or steel, excluding coach screws, wood screws, screw hooks and screw rings, spring washers and other lock washers, rivets

Manufacture from materials of any heading, except that of the product

–

Articles of titanium

Manufacture in which the value of all the materials of the same heading as the product used does not exceed 50 per cent of the ex-works price of the product.

9024

Machines and appliances for testing the hardness, strength, compressibility, elasticity or other mechanical properties of materials(for example, metals, wood, textiles, paper, plastics)

Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

9025

–

Hydrometers and similar floating instruments, thermometers (except for electric or electronic thermometers for vehicles), pyrometers, barometers, hygrometers and psychrometers, recording or not, and any combination of these instruments

Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

–

Electric or electronic thermometers for vehicles

Manufacture from materials of any heading, except that of the product

Manufacture in which the value of all the materials used does not exceed 55 per cent of the ex-works price of the product

9026

–

Instruments and apparatus for measuring or checking the flow, level, or other variables of liquids or gases (for example, flow meters, level gauges, manometers, heat meters), excluding electric or electronic fuel gauges for vehicles instruments and apparatus of heading 9014 , 9015 , 9028 or 9032

Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

–

Others

Manufacture from materials of any heading, except that of the product

Manufacture in which the value of all the materials used does not exceed 55 per cent of the ex-works price of the product

9027

Instruments and apparatus for physical or chemical analysis (for example, polarimeters, refractometers, spectrometers, gas or smoke analysis apparatus); instruments and apparatus for measuring or checking viscosity, porosity, expansion, surface tension or the like; instruments and apparatus for measuring or checking quantities of heat, sound or light (including exposure meters); microtomes

Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

9028

Gas, liquid or electricity supply or production meters, including calibrating meters therefor:

–

Parts and accessories

Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

–

Other

Manufacture in which:

–

the value of all the materials used does not exceed 40 per cent of the ex-works price of the product, and

–

the value of all the non-originating materials used does not exceed the value of all the originating materials used

Manufacture in which the value of all the materials used does not exceed 30 per cent of the ex-works price of the product

9029

Revolution counters, production counters, taximeters, mileometers, pedometers and the like; speed indicators and tachometers, other than those of heading 9014 or 9015 ; stroboscopes

Manufacture from materials of any heading, except that of the product

Manufacture in which the value of all the materials used does not exceed 55 per cent of the ex-works price of the product

9030

Oscilloscopes, spectrum analysers and other instruments and apparatus for measuring or checking electrical quantities, excluding meters of heading 9028 ; instruments and apparatus for measuring or detecting alpha, beta, gamma, X-ray, cosmic or other ionising radiations

Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

9031

Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this chapter; profile projectors

Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

9032

Automatic regulating or controlling instruments and apparatus

Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

9033

Parts and accessories (not specified or included elsewhere in this chapter) for machines, appliances, instruments or apparatus of Chapter 90

Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

ex Chapter 91

Clocks and watches and parts thereof; except for:

Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

ex ex 9104

Instrument panel clocks and clocks of a similar type for vehicles of Chapter 87

Manufacture in which the value of all the materials used does not exceed 60 per cent of the ex-works price of the product

9105

Other clocks

Manufacture in which:

–

the value of all the materials used does not exceed 40 per cent of the ex-works price of the product, and

–

the value of all the non-originating materials used does not exceed the value of all the originating materials used

Manufacture in which the value of all the materials used does not exceed 30 per cent of the ex-works price of the product

9109

Clock movements, complete and assembled

Manufacture in which:

–

the value of all the materials used does not exceed 40 per cent of the ex-works price of the product, and

–

the value of all the non-originating materials used does not exceed the value of all the originating materials used

Manufacture in which the value of all the materials used does not exceed 30 per cent of the ex-works price of the product

9110

Complete watch or clock movements, unassembled or partly assembled (movement sets); incomplete watch or clock movements, assembled; rough watch or clock movements

Manufacture in which:

–

the value of all the materials used does not exceed 40 per cent of the ex-works price of the product, and

–

within the above limit, the value of all the materials of heading 9114 used does not exceed 10 per cent of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 30 per cent of the ex-works price of the product

9111

Watch cases and parts thereof

Manufacture:

–

from materials of any heading, except that of the product, and

–

in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 30 per cent of the ex-works price of the product

9112

Clock cases and cases of a similar type for other goods of this Chapter, and parts thereof

Manufacture:

–

from materials of any heading, except that of the product, and

–

in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 30 per cent of the ex-works price of the product

9113

Watch straps, watch bands and watch bracelets, and parts thereof:

–

Of base metal, whether or not gold or silver-plated, or of metal clad with precious metal

Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

–

Other

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

Chapter 92

Musical instruments; parts and accessories of such articles

Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

Chapter 93

Arms and ammunition; parts and accessories thereof

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

ex Chapter 94

Furniture; bedding, mattresses, mattress supports, cushions and similar stuffed furnishings; luminaires and lighting fittings, not elsewhere specified or included; illuminated signs, illuminated name-plates and the like; prefabricated buildings; except for:

Manufacture from materials of any heading, except that of the product

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

9401

Seats (other than those of heading 9402 ), whether or not convertible into beds, and parts thereof

Manufacture from materials of any heading, except that of the product

Manufacture in which the value of all the materials used does not exceed 55 per cent of the ex-works price of the product

9405 and 9406

Luminaires and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated name-plates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included; prefabricated buildings

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

ex Chapter 95

Toys, games and sports requisites; parts and accessories thereof; except for:

Manufacture from materials of any heading, except that of the product

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

ex ex 9506

Golf clubs and parts thereof

Manufacture from materials of any heading, except that of the product. However, roughly-shaped blocks for making golf-club heads may be used

ex Chapter 96

Miscellaneous manufactured articles; except for:

Manufacture from materials of any heading, except that of the product

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

ex ex 9601 and ex ex 9602

Articles of animal, vegetable or mineral carving materials

Manufacture from “worked” carving materials of the same heading as the product

ex ex 9603

Brooms and brushes (except for besoms and the like and brushes made from marten or squirrel hair), hand-operated mechanical floor sweepers, not motorised, paint pads and rollers, squeegees and mops

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

9605

Travel sets for personal toilet, sewing or shoe or clothes cleaning

Each item in the set must satisfy the rule which would apply to it if it were not included in the set. However, non-originating articles may be incorporated, provided that their total value does not exceed 15 per cent of the ex-works price of the set

9606

Buttons, press-fasteners, snap-fasteners and press-studs, button moulds and other parts of these articles; button blanks

Manufacture:

–

from materials of any heading, except that of the product, and

–

in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

9608

Ball-point pens; felt-tipped and other porous-tipped pens and markers; fountain pens, stylograph pens and other pens; duplicating stylos; propelling or sliding pencils; pen-holders, pencil-holders and similar holders; parts (including caps and clips) of the foregoing articles, other than those of heading 9609

Manufacture from materials of any heading, except that of the product. However, nibs or nib-points of the same heading as the product may be used

ex ex 9609

Pencils

Manufacture from materials of any heading

9612

Typewriter or similar ribbons, inked or otherwise prepared for giving impressions, whether or not on spools or in cartridges; ink-pads, whether or not inked, with or without boxes

Manufacture:

–

from materials of any heading, except that of the product, and

–

in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

ex ex 9613

Lighters with piezo-igniter

Manufacture in which the value of all the materials of heading 9613 used does not exceed 30 per cent of the ex-works price of the product

ex ex 9614

Smoking pipes and pipe bowls

Manufacture from roughly-shaped blocks

Chapter 97

Works of art, collectors’ pieces and antiques

Manufacture from materials of any heading, except that of the product

’

( 1 )   In the case of products of heading 0504, the rule of Article 5(1)(c) applies.

( 2 )   See Note 1 of Appendix 2A.

( 3 )   See Note 2 of Appendix 2A.

( 4 )   See Note 2 of Appendix 2A.

( 5 )   See Note 2 of Appendix 2A.

( 6 )   See Note 2 of Appendix 2A.

( 7 )   See Note 3 of Appendix 2A.

( 8 )   For the special conditions relating to “specific processes”, see Introductory Notes 7.1 and 7.3.

( 9 )   For the special conditions relating to “specific processes”, see Introductory Note 7.2.

( 10 )   For the special conditions relating to “specific processes”, see Introductory Note 7.2.

( 11 )   For the special conditions relating to “specific processes”, see Introductory Note 7.2.

( 12 )   For the special conditions relating to “specific processes”, see Introductory Notes 7.1 and 7.3.

( 13 )   For the special conditions relating to “specific processes”, see Introductory Notes 7.1 and 7.3.

( 14 )   For the special conditions relating to “specific processes”, see Introductory Notes 7.1 and 7.3.

( 15 )   For the special conditions relating to “specific processes”, see Introductory Notes 7.1 and 7.3.

( 16 )   For the special conditions relating to “specific processes”, see Introductory Notes 7.1 and 7.3.

( 17 )   For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.

( 18 )

“A group” is regarded as any part of the heading separated from the rest by a semicolon.

( 19 )   For the special conditions relating to “specific processes”, see Introductory Notes 7.1 and 7.3.

( 20 )   See Note 4 of Appendix 2 A.

( 21 )   See Note 5 of Appendix 2A.

( 22 )   For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.

( 23 )   For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.

( 24 )   For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.

( 25 )   For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.

( 26 )   For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.

( 27 )   For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.

( 28 )   For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.

( 29 )   For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.

( 30 )   For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.

( 31 )   For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.

( 32 )   For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.

( 33 )   For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.

( 34 )   For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.

( 35 )   For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.

( 36 )   For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.

( 37 )   For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.

( 38 )   For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.

( 39 )   For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.

( 40 )   For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.

( 41 )   For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.

( 42 )   For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.

( 43 )   For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.

( 44 )   For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.

( 45 )   For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.

( 46 )   For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.

( 47 )   See Note 6 of Appendix 2A.

( 48 )   For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.

( 49 )   For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.

( 50 )   For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.

( 51 )   For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.

( 52 )   For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.

( 53 )   For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.

( 54 )   For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.

( 55 )   For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.

( 56 )   For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.

( 57 )   The use of this material is restricted to the manufacture of woven fabrics of a kind used in paper-making machinery.

( 58 )   The use of this material is restricted to the manufacture of woven fabrics of a kind used in paper-making machinery.

( 59 )   The use of this material is restricted to the manufacture of woven fabrics of a kind used in paper- making machinery.

( 60 )   For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.

( 61 )   For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.

( 62 )   For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.

( 63 )   See Introductory Note 6.

( 64 )   For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5

( 65 )   See Note 7 of Appendix 2A.

( 66 )   For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.

( 67 )   See Introductory Note 6.

( 68 )   See Introductory Note 6.

( 69 )   See Introductory Note 6.

( 70 )   See Introductory Note 6.

( 71 )   See Introductory Note 6.

( 72 )   For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.

( 73 )   See Introductory Note 6.

( 74 )   See Introductory Note 6.

( 75 )   For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.

( 76 )   See Introductory Note 6.

( 77 )   See Introductory Note 6.

( 78 )   See Introductory Note 6.

( 79 )   See Introductory Note 6.

( 80 )   See Introductory Note 6.

( 81 )   See Introductory Note 6.

( 82 )   For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.

( 83 )   See Introductory Note 6.

( 84 )   For knitted or crocheted articles, not elastic or rubberised, obtained by sewing or assembling pieces of knitted or crocheted fabrics (cut out or knitted directly to shape), see Introductory Note 6.

( 85 )   See Introductory Note 6.

( 86 )   For knitted or crocheted articles, not elastic or rubberised, obtained by sewing or assembling pieces of knitted or crocheted fabrics (cut out or knitted directly to shape), see Introductory Note 6.

( 87 )   For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.

( 88 )   For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.

( 89 )   See Introductory Note 6.

( 90 )   For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.

( 91 )   See Introductory Note 6.

( 92 )   See Introductory Note 6.

( 93 )   SEMII – Semiconductor Equipment and Materials Institute Incorporated.

( 94 )   See Note 8 in Appendix 2A.

( 95 )   See Notes 8 and 9 in Appendix 2A.

ANNEX 2

ANNEX 2

‘Appendix 2A

ADDENDUM TO THE LIST OF WORKING OR PROCESSING REQUIRED TO BE CARRIED OUT ON NON-ORIGINATING MATERIALS IN ORDER THAT THE PRODUCT MANUFACTURED CAN OBTAIN ORIGINATING STATUS

Common provisions

1.

For the products described below, the following rules may also apply instead of the rules set out in Appendix 2 for products originating either in the European Union or in a signatory Andean Country, as the case may be.

2.

When a product is covered by a rule of origin that is subject to quotas, the proof of origin for that product shall contain the following statement in English: “Product originating in accordance with Appendix 2A of Annex II”.

3.

The quotas indicated below will be managed on a first-come, first-served basis. The quantities exported to a Party shall be calculated on the basis of the imports of the Party concerned.

4.

In the European Union, any quota referred to in this Appendix shall be managed by the European Commission.

Note 1

The following rule shall confer origin for products exported from the European Union to Colombia, Ecuador or Peru within the annual quotas per country indicated below:

HS heading

Description of product

Working or processing carried out on non-originating materials that confers originating status

(1)

(2)

(3) or (4)

ex ex 0901

Roasted coffee of the variety Arabica

Manufacture from materials of any heading

Colombia

Ecuador

Peru

120 Metric Tonnes

110 Metric Tonnes

30 Metric Tonnes

Note 2

The following rule shall confer origin for products exported from the European Union to Peru and from Peru to the European Union:

HS heading

Description of product

Working or processing carried out on non-originating materials that confers originating status

(1)

(2)

(3) or (4)

1507 to 1508

Soya-bean oil, peanut (groundnut) oil, and their fractions, but not chemically modified

Manufacture from materials of any subheading, except that of the product

1512 to 1515

Sunflower-seed, safflower or cotton-seed, coconut (copra), palm kernel, babassu, rape, colza, mustard, other fixed vegetable or microbial fats and oils (including jojoba oil) and their fractions, but not chemically modified

Manufacture from materials of any subheading, except that of the product

1516

Animal, vegetable or microbial fats and oils and their fractions, partly or wholly hydrogenated, inter-esterified, re-esterified or elaidinised, whether or not refined, but not further prepared

Manufacture from materials of any heading, except that of the product

1517

Margarine; edible mixtures or preparations of animal, vegetable or microbial fats or oils or of fractions of different fats or oils of this Chapter, other than edible fats or oils or their fractions of heading 1516

Manufacture:

—

from materials of any heading, except that of the product, and

—

in which at least 40 per cent by weight of all the materials of Chapter 4 used are originating

Note 3

The following rule shall confer origin for products exported from the European Union to Colombia, Ecuador or Peru within the annual quotas per country indicated below:

HS heading

Description of product

Working or processing carried out on non-originating materials that confers originating status

(1)

(2)

(3) or (4)

1805

Cocoa powder, not containing added sugar or other sweetening matter

Manufacture from materials of any heading, except that of the product

Colombia

Ecuador

Peru

100 Metric Tonnes

120 Metric Tonnes

450 Metric Tonnes

Note 4

The following rule shall confer origin for products exported from the European Union to Peru and from Peru to the European Union:

HS heading

Description of product

Working or processing carried out on non-originating materials that confers originating status

(1)

(2)

(3) or (4)

ex ex 3826

Biodiesel: mixtures of mono alkyl esters of the fatty acids of the long chain of sub products of vegetable and animal oils. For greater certainty, the mono alkyl ester makes reference to methyl ester or ethyl ester of fatty acids

Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 per cent of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 40 per cent of the ex-works price of the product

Note 5

The following rule shall confer origin for products exported from Colombia, Ecuador and Peru to the European Union within the annual quotas per country indicated below:

HS heading

Description of product

Working or processing carried out on non-originating materials that confers originating status

(1)

(2)

(3) or (4)

3920

Other plates, sheets, film, foil and strip, of plastics, non-cellular and not-reinforced, laminated, supported or similarly combined with other materials

Manufacture from materials of any heading except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 percent of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 55 per cent of the ex-works price of the product

Colombia

Ecuador

Peru

15 000 Metric Tonnes

15 000 Metric Tonnes

15 000 Metric Tonnes

If more than 75 per cent of the above-stated quota quantities is used during a given year, those quantities shall be reviewed, with a view to agree on their increase, within the Subcommittee.

Note 6

The following rule shall confer origin for products exported from Peru to the European Union within the annual quota indicated below:

HS heading

Description of product

Working or processing carried out on non-originating materials that confers originating status

(1)

(2)

(3) or (4)

ex 5607.50

and 5608

Twine and nets

Manufacture from high tenacity filament yarn classified in subheadings 5402.11, 5402.19 or 5402.20

HS classification

Peru

ex 5607.50 and 5608

650 Metric Tonnes

This quantity shall be subject to revision every three years, in a period of 12 years. If more than 75 per cent of the above-stated quota quantity is used per year during that 3-year period, the quantity for the next three years will be increased by the rate of growth over the same period of exports from Peru to the European Union of products of chapter 50 to 63 or by 5 per cent, whichever is higher.

That revision will be made according to the data published by the statistical office of the European Union (Eurostat) as soon as they are available. The European Commission shall publish the adjusted quotas in the Official Journal of the European Union.

Note 7

The following rule shall confer origin for products exported from Colombia, Ecuador and Peru to the European Union within the annual quotas, per country indicated below:

HS heading

Description of product

Working or processing carried out on non-originating materials that confers originating status

(1)

(2)

(3) or (4)

6108.22

Women’s or girls’ briefs and panties, knitted or crocheted of man-made fibres

Manufacture from nylon yarn or elastomeric yarns from headings 5402 and 5404

6112.31

Men’s or boys’ swimwear knitted or crocheted of synthetic fibres

Manufacture from nylon yarn or elastomeric yarns from headings 5402 and 5404

6112.41

Women’s or girls’ swimwear knitted or crocheted of synthetic fibres

Manufacture from nylon yarn or elastomeric yarns from headings 5402 and 5404

6115.10

Graduated compression hosiery (for example, stockings for varicose veins), knitted or crocheted.

Manufacture from nylon yarn or elastomeric yarns from headings 5402 and 5404

6115.21

Other pantyhose and tights of synthetic fibres measuring per single yarn less than 67 decitex, knitted or crocheted

Manufacture from nylon yarn or elastomeric yarns from headings 5402 and 5404

6115.22

Other pantyhose and tights of synthetic fibres measuring per single yarn 67 decitex or more, knitted or crocheted

Manufacture from nylon yarn or elastomeric yarns from headings 5402 and 5404

6115.30

Other women’s full-length or knee length hosiery, measuring per single yarn less than 67 decitex

Manufacture from nylon yarn or elastomeric yarns from headings 5402 and 5404

6115.96

Other, of synthetic fibres

Manufacture from nylon yarn or elastomeric yarns from headings 5402 and 5404

HS heading

Colombia (Metric Tonnes)

Ecuador (Metric Tonnes)

Peru (Metric Tonnes)

6108.22

200

200

200

6112.31

25

25

25

6112.41

100

100

100

6115.10

25

25

25

6115.21

40

40

40

6115.22

15

15

15

6115.30

25

25

25

6115.96

175

175

175

If more than 75 per cent of the above-stated quota quantities is used during a given year, these quantities shall be reviewed, with a view to agree on their increase, within the Subcommittee.

Note 7a

The following rule shall confer origin for products exported from Ecuador to the European Union and from the European Union to Ecuador:

HS heading

Description of product

Working or processing carried out on non-originating materials that confers originating status

(1)

(2)

(3) or (4)

ex ex 6504

Toquilla straw hats

Manufacture in which the toquilla straw of heading 1401 used is originating

Note 8

The rules of origin provided for in Appendix 2 for the products listed below shall apply for as long as the European Union maintains a 0 per cent WTO bound tariff for these products. If the European Union increases the WTO bound tariff applicable to these products, the following rule shall confer origin for products exported from Colombia, Ecuador and Peru to the European Union within the annual quotas per country, indicated below:

HS heading

Description of product

Working or processing carried out on non-originating materials that confers originating status

(1)

(2)

(3) or (4)

7209 to 7214

Flat-rolled products of iron or non-alloy steel; bars and rods of iron or non-alloy steel

Manufacture from materials of any heading, except that of the product

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

7216 to 7217

Angles, shapes and sections of iron or non-alloy steel; wire of iron or non-alloy steel

Manufacture from materials of any heading, except that of the product

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

7304 to 7306

Tubes, pipes and hollow profiles, of iron or steel

Manufacture from materials of any heading, except that of the product

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

7308

Structures and parts of structures, of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel

Manufacture from materials of any heading, except that of the product

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

HS heading

Description

Colombia (Metric Tonnes)

Ecuador (Metric Tonnes)

Peru (Metric Tonnes)

7209

Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated

100,000

100,000

100,000

7210

Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated

100,000

100,000

100,000

7211

Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated

7212

Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated

100,000

100,000

100,000

7213

Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel

100,000

100,000

100,000

7214

Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling

100,000

100,000

100,000

7216

Angles, shapes and sections of iron or non-alloy steel

100,000

100,000

100,000

7217

Wire of iron or non-alloy steel

50,000

50,000

50,000

7304

Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel

50,000

50,000

50,000

7305

Other tubes and pipes (for example, welded, riveted or similarly closed), having circular cross-sections, the external diameter of which exceeds 406.4 mm, of iron or steel

50,000

50,000

50,000

7306

Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel

100,000

100,000

100,000

7308

Structures and parts of structures, of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel

50,000

50,000

50,000

When 50 per cent of a quota entry is reached, during a given year, the annual tonnage shall increase by 50 per cent for the following year. The basis for calculation shall be the quota quantity of the previous year. Those quantities, as well as the basis for calculation may be revised at the request of any Party upon agreement with the other Parties.

Note 9

The following rule shall confer origin for products exported from Colombia, Ecuador and Peru to the European Union within the annual quota per country indicated below:

HS heading

Description of product

Working or processing carried out on non-originating materials that confers originating status

(1)

(2)

(3) or (4)

7321

Stoves, ranges, grates, cookers (including those with subsidiary boilers for central heating), barbecues, braziers, gas-rings, plate warmers and similar non-electric domestic appliances, and parts thereof, of iron or steel

Manufacture from materials of any heading, except that of the product

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

7323

Table, kitchen or other household articles and parts thereof, of iron or steel; iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like, of iron or steel

Manufacture from materials of any heading, except that of the product

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

7325

Other cast articles of iron or steel

Manufacture from materials of any heading, except that of the product

Manufacture in which the value of all the materials used does not exceed 50 per cent of the ex-works price of the product

HS heading

Colombia

Ecuador

Peru

7321

20,000 units

20,000 units

20,000 units

7323

50,000 Metric Tonnes

50,000 Metric Tonnes

50,000 Metric Tonnes

7325

50,000 Metric Tonnes

50,000 Metric Tonnes

50,000 Metric Tonnes

Those quantities may be revised at the request of any Party upon agreement with the others Parties.’.

ANNEX 3

ANNEX 3

‘Appendix 5

PRODUCTS TO WHICH SUBPARAGRAPH (b) OF THE DECLARATION OF THE EUROPEAN UNION CONCERNING ARTICLE 5 IN RELATION TO ORIGINATING PRODUCTS FROM COLOMBIA, ECUADOR AND PERU APPLIES

1.

The conditions established in subparagraph (b) of the Declaration of the European Union concerning Article 5 in relation to originating products from Colombia, Ecuador and Peru apply for determining the origin of the following products exported from Peru to the European Union subject to the annual quotas established below:

Combined Nomenclature 2024 and (where necessary) TARIC codes

Description

Metric tons

0303 54 10

Frozen mackerel Scomber scombrus and Scomber japonicus

4 000

0303 59 10

Frozen anchovies Engraulis spp.

120

0303 55 10

0303559010

Horse mackerel Trachurus trachurus , scad, Caranx trachurus , frozen

60

0307 43 91

0307 43 99

Frozen squid Ommastrephes spp., Nototodarus spp. and Sepioteuthis spp., with or without shell (excl. Ommastrephes Sagittatus )

4 200

0307 49 50

0307 49 80

Squid Ommastrephes spp., Nototodarus spp., Sepioteuthis spp., dried, salted or in brine, with or without shell (excl. Ommastrephes Sagittatus )

2 500

1604 15 11

Fillets of mackerel of the species Scomber scombrus and Scomber japonicus , prepared or preserved

2 000

1604 15 19

Mackerel of the species Scomber scombrus and Scomber japonicus , prepared or preserved, whole or in pieces (excl. minced mackerel and fillets of mackerel)

800

1604 15 90

Prepared or preserved mackerel of species Scomber australasicus , whole or in pieces (excl. minced)

20

1604 16 00

Prepared or preserved anchovies, whole or in pieces (excl. minced)

400

1604 20 40

Prepared or preserved anchovies (excl. whole or in pieces)

30

0307190010

0307291010

0307299010

0307492010

0307494010

0307495010

0307496010

0307498010

0307590010

0307790010

0307870010

0307880010

0307990010

1605 51 00

1605 52 00

1605531095

1605539095

1605 54 00

1605 55 00

1605 56 00

1605 57 00

1605590010

1605590090

Mussels, snails and other molluscs, prepared or preserved (excl. mussels of the species Mytilus and of the species Perna )

500

2.

The proofs of origin issued or made out for products which use the quotas established in this Appendix shall bear the following statement in English: “Product originating in accordance with Appendix 5 of Annex II”.

3.

The quotas established in this Appendix shall be managed on a first-come, first-served basis. The quantities exported to the European Union shall be calculated on the basis of the imports of the European Union.’.