LawPlayer
My bookmarksSign up freeSign up free
Source

Commission Delegated Regulation (EU) 2021/1243 of 19 April 2021 supplementing Regulation (EU) 2019/2144 of the European Parliament and of the Council by laying down detailed rules concerning the alcohol interlock installation facilitation in motor vehicles and amending Annex II to that Regulation (Text with EEA relevance)

Commission Delegated Regulation (EU) 2021/1243 of 19 April 2021 supplementing Regulation (EU) 2019/2144 of the European Parliament and of the Council by laying down detailed rules concerning the alcohol interlock installation facilitation in motor vehicles and amending Annex II to that Regulation (Text with EEA relevance)

Delegated Regulation (EU) 2021/1243 · Regulation · 5 articles

Data as of 2026-07-04 · Compiled from an official source version. Later amendments or repeals may not be reflected; the official text prevails. · Read the official text ↗

Requirements for alcohol interlock installation facilitation

Article 1

Open ↗

The type-approval of motor vehicles with regard to alcohol interlock installation facilitation shall be subject to the requirements set out in Annex I.

Amendment to Regulation (EU) 2019/2144

Article 2

Open ↗

Annex II to Regulation (EU) 2019/2144 is amended in accordance with Annex II to this Regulation.

Entry into force and application

Article 3

Open ↗

This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union . It shall apply from 6 July 2022.

Supplementary provisions

Technical requirements

ANNEX ISupplementary provisions

Open ↗

ANNEX I Technical requirements 1.    Alcohol interlock installation facilitation shall allow the fitting or retrofitting of an alcohol interlock complying with European Standards EN 50436-1:2014 or EN 50436-2:2014+A1:2015. 2.    The vehicle system as regards alcohol interlock installation facilitation in each motor vehicle of categories M and N shall conform to the relevant vehicle model as laid down in the alcohol interlock installation document (‘installation document’), conforming to European Standard EN 50436-7:2016. For this purpose, the installation document shall cover at least one of the options in EN 50436-7:2016 Annex C 3a, 3b or 3c. The vehicle manufacturer may provide the installation document conforming to later revisions of the European Standard, in agreement with the approval authority and the technical service. 3.    Installation document 3.1.    The installation document shall contain a detailed description, diagrams and images explaining the installation of an alcohol interlock, covering any of the following sets of information: (a) the information regarding battery feed, ground, vehicle ready and start enabler; (b) the information regarding battery feed, ground, vehicle ready and start-allowing or start-prohibiting input and output line, and an optional detection of propulsion capability (e.g. engine run) or vehicle moving signal line; or (c) the information regarding battery feed, ground and a data bus connection. 3.2.    Any additional software, hardware or procedures necessary to allow the installation of an alcohol interlock in a standard vehicle shall be identified and indicated in the installation document. 3.3.    The alcohol interlock shall be in the blocking state normally. The blocking state of the alcohol interlock shall be achieved by either an open output relay, a corresponding output signal or the corresponding digital bus message. The closure of this relay or the change of the blocking output signal into the non-blocking output signal or the transmission of the corresponding non-blocking data bus message shall occur when an accepted breath sample with an alcohol concentration below the pre-set limit has been delivered. 3.4.    An installed alcohol interlock shall only intervene in the engine starting process or in allowing the vehicle to move under its own power upon the activation of the vehicle master control switch and the alcohol interlock shall not influence a running engine or a moving vehicle. 4.    Access to alcohol interlock facilitation information 4.1.    Vehicle manufacturers shall put in place the necessary arrangements and procedures to ensure that vehicle alcohol interlock facilitation information, in the form of relevant details of the standardised installation document, is accessible in accordance with Annex X of Regulation (EU) 2018/858. As some of the information may relate to security-related vehicle repair and maintenance information services, access to the alcohol interlock facilitation information is restricted to independent operators that comply with the procedure laid down in Appendix 3 of that Annex. 5.    The vehicle manufacturer shall annex to the information document a declaration made out using the template set out in the Appendix to this Annex.

Amendment to Regulation (EU) 2019/2144

ANNEX IISupplementary provisions

Open ↗

ANNEX II Amendment to Regulation (EU) 2019/2144 In Annex II to Regulation (EU) 2019/2144 the row for requirement E1 is replaced by the following: ‘E1 Alcohol interlock installation facilitation Commission Delegated Regulation (EU) 2021/1243  ( *1 )   B B B B B B             ( *1 )   Commission Delegated Regulation (EU) 2021/1243 of 19 April 2021 supplementing Regulation (EU) 2019/2144 of the European Parliament and of the Council by laying down detailed rules concerning the alcohol interlock installation facilitation in motor vehicles and amending Annex II to that Regulation (OJ L 272, p. 11).’

Other acts of the same type
Commission Implementing Regulation (EU) 2016/415 of 21 March 2016 withdrawing the acceptance of the undertaking for two exporting producers and repealing Decision 2008/577/EC accepting an undertaking offered in connection with the anti-dumping proceeding concerning imports of ammonium nitrate originating in RussiaCommission Regulation (EU) 2016/403 of 18 March 2016 supplementing Regulation (EC) No 1071/2009 of the European Parliament and of the Council with regard to the classification of serious infringements of the Union rules, which may lead to the loss of good repute by the road transport operator, and amending Annex III to Directive 2006/22/EC of the European Parliament and of the Council (Text with EEA relevance)Commission Implementing Regulation (EU) 2016/432 of 18 March 2016 amending Regulation (EC) No 1484/95 as regards fixing representative prices in the poultrymeat and egg sectors and for egg albuminCommission Implementing Regulation (EU) 2016/799 of 18 March 2016 implementing Regulation (EU) No 165/2014 of the European Parliament and of the Council laying down the requirements for the construction, testing, installation, operation and repair of tachographs and their components (Text with EEA relevance)Commission Delegated Regulation (EU) 2016/812 of 18 March 2016 amending Delegated Regulation (EU) 2015/2195 supplementing Regulation (EU) No 1304/2013 of the European Parliament and of the Council on the European Social Fund, regarding the definition of standard scales of unit costs and lump sums for reimbursement of expenditure by the Commission to Member StatesCouncil Regulation (EU) 2016/369 of 15 March 2016 on the provision of emergency support within the UnionCommission Implementing Regulation (EU) 2016/370 of 15 March 2016 approving the active substance pinoxaden, in accordance with Regulation (EC) No 1107/2009 of the European Parliament and of the Council concerning the placing of plant protection products on the market, amending the Annex to Commission Implementing Regulation (EU) No 540/2011 and allowing the Member States to extend provisional authorisations granted for that active substance (Text with EEA relevance)Commission Regulation (EU) 2016/371 of 15 March 2016 refusing to authorise certain health claims made on foods, other than those referring to the reduction of disease risk and to children's development and health (Text with EEA relevance)Commission Regulation (EU) 2016/372 of 15 March 2016 refusing to authorise a health claim made on foods and referring to the reduction of disease risk (Text with EEA relevance)Council Regulation (EU) 2016/363 of 14 March 2016 amending Regulation (EC) No 881/2002 imposing certain specific restrictive measures directed against certain persons and entities associated with the Al-Qaida networkRegulation (EU) 2016/445 of the European Central Bank of 14 March 2016 on the exercise of options and discretions available in Union law (ECB/2016/4)Council Implementing Regulation (EU) 2016/354 of 11 March 2016 implementing Article 17(1) of Regulation (EU) No 224/2014 concerning restrictive measures in view of the situation in the Central African Republic

Source: EUR-Lex (Publications Office of the EU), © European Union, reuse permitted under Commission Decision 2011/833/EU.

Contents

What to look at next