No longer in force

Commission Implementing Decision (EU) 2023/941 of 2 May 2023 on harmonised standards for personal protective equipment drafted in support of Regulation (EU) 2016/425 of the European Parliament and of the Council (Text with EEA relevance)

Implementing Decision (EU) 2023/941 · Decision · 6 articles

RepealedRepealed 2026-06-15Status inferred from the source text; the official notice prevails.This legislation has been repealed. Do not cite it as law in force.

Data as of 2026-07-04 · Compiled from an official source version. Later amendments or repeals may not be reflected; the official text prevails. · Read the official text ↗

Article 1

The references to harmonised standards for personal protective equipment drafted in support of Regulation (EU) 2016/425, listed in Annex I to this Decision, are hereby published in the Official Journal of the European Union .

Article 2

Implementing Decision (EU) 2020/668 is repealed.

Article 3

Communication 2018/C 209/03 is repealed. However, it shall continue to apply in respect of the references of harmonised standards listed in Annex II to this Decision until the dates of withdrawal of those references set out in that Annex.

Article 4

This Decision shall enter into force on the day of its publication in the Official Journal of the European Union .

Supplementary provisions

ANNEX ISupplementary provisions

ANNEX I No Reference of the standard 1. EN 136:1998 Respiratory protective devices – Full face masks – Requirements, testing, marking EN 136:1998/AC:2003 2. EN 137:2006 Respiratory protective devices – Self-contained open-circuit compressed air breathing apparatus with full face mask – Requirements, testing, marking 3. EN 140:1998 Respiratory protective devices – Half masks and quarter masks – Requirements, testing, marking EN 140:1998/AC:1999 4. EN 142:2002 Respiratory protective devices – Mouthpiece assemblies – Requirements, testing, marking 5. EN 143:2021 Respiratory protective devices – Particle filters – Requirements, testing, marking 6. EN 144-1:2000 Respiratory protective devices – Gas cylinder valves – Part 1: Thread connections for insert connector EN 144-1:2000/A1:2003 EN 144-1:2000/A2:2005 7. EN 144-2:1998 Respiratory protective devices – Gas cylinder valves – Part 2: Outlet connections 8. EN 144-3:2003 Respiratory protective devices – Gas cylinder valves – Part 3: Outlet connections for diving gases Nitrox and oxygen EN 144-3:2003/AC:2003 9. EN 145:1997 Respiratory protective devices – Self-contained closed-circuit breathing apparatus compressed oxygen or compressed oxygen-nitrogen type – Requirements, testing, marking EN 145:1997/A1:2000 10. EN 148-1:1999 Respiratory protective devices – Threads for facepieces – Part 1: Standard thread connection 11. EN 148-2:1999 Respiratory protective devices – Threads for facepieces – Part 2: Centre thread connection 12. EN 148-3:1999 Respiratory protective devices – Threads for facepieces – Part 3: Tread connection M 45 x 3 13. EN 149:2001+A1:2009 Respiratory protective devices – Filtering half masks to protect against particles – Requirements, testing, marking 14. EN 175:1997 Personal protection – Equipment for eye and face protection during welding and allied processes 15. EN 207:2017 Personal eye-protection equipment – Filters and eye-protectors against laser radiation (laser eye-protectors) 16. EN 208:2009 Personal eye-protection – Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors) 17. EN 250:2014 Respiratory equipment – Open-circuit self-contained compressed air diving apparatus – Requirements, testing and marking 18. EN 342:2017 Protective clothing – Ensembles and garments for protection against cold 19. EN 343:2019 Protective clothing – Protection against rain 20. EN 352-1:2020 Hearing protectors – General requirements – Part 1: Earmuffs Notice: This standard does not require labelling indicating the noise attenuation level on the product. Compliance with this standard therefore does not confer a presumption of conformity with point 3.5., second paragraph, of Annex II to Regulation (EU) 2016/425. 21. EN 352-2:2020 Hearing protectors – General requirements – Part 2: Earplugs Notice: This standard does not require labelling indicating the noise attenuation level on the product. Compliance with this standard therefore does not confer a presumption of conformity with point 3.5., second paragraph, of Annex II to Regulation (EU) 2016/425. 22. EN 352-3:2020 Hearing protectors – General requirements – Part 3: Earmuffs attached to head protection and/or face protection devices Notice: This standard does not require labelling indicating the noise attenuation level on the product. Compliance with this standard therefore does not confer a presumption of conformity with point 3.5., second paragraph, of Annex II to Regulation (EU) 2016/425. 23. EN 352-4:2020 Hearing protectors – Safety requirements – Part 4: Level-dependent earmuffs 24. EN 352-5:2020 Hearing protectors – Safety requirements – Part 5: Active noise reduction earmuffs 25. EN 352-6:2020 Hearing protectors – Safety requirements – Part 6: Earmuffs with safety-related audio input 26. EN 352-7:2020 Hearing protectors – Safety requirements – Part 7: Level-dependent earplugs 27. EN 352-8:2020 Hearing protectors – Safety requirements – Part 8: Entertainment audio earmuffs 28. EN 352-9:2020 Hearing protectors – Safety requirements – Part 9: Earplugs with safety-related audio input 29. EN 352-10:2020 Hearing protectors – Safety requirements – Part 10: Entertainment audio earplugs 30. EN 353-1:2014+A1:2017 Personal fall protection equipment – Guided type fall arresters including an anchor line – Part 1: Guided type fall arresters including a rigid anchor line 31. EN 353-2:2002 Personal protective equipment against falls from a height – Part 2: Guided type fall arresters including a flexible anchor line 32. EN 354:2010 Personal fall protection equipment – Lanyards 33. EN 355:2002 Personal protective equipment against falls from a height – Energy absorbers 34. EN 358:2018 Personal protective equipment for work positioning and prevention of falls from a height – Belts and lanyards for work positioning or restraint 35. EN 360:2002 Personal protective equipment against falls from a height – Retractable type fall arresters 36. EN 361:2002 Personal protective equipment against falls from a height – Full body harnesses 37. EN 362:2004 Personal protective equipment against falls from a height – Connectors 38. EN 365:2004 Personal protective equipment against falls from a height – General requirements for instructions for use, maintenance, periodic examination, repair, marking and packaging EN 365:2004/AC:2006 39. EN ISO 374-1:2016 Protective gloves against dangerous chemicals and micro-organisms – Part 1: Terminology and performance requirements for chemical risks (ISO 374-1:2016) 40. EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms – Part 5: Terminology and performance requirements for micro-organisms risks (ISO 374-5:2016) 41. EN 388:2016+A1:2018 Protective gloves against mechanical risks 42. EN 397:2012+A1:2012 Industrial safety helmets 43. EN 402:2003 Respiratory protective devices – Lung governed demand self-contained open-circuit compressed air breathing apparatus with full face mask or mouthpiece assembly for escape – Requirements, testing, marking 44. EN 403:2004 Respiratory protective devices for self-rescue – Filtering devices with hood for escape from fire – Requirements, testing, marking 45. EN 404:2005 Respiratory protective devices for self-rescue – Filter self-rescuer from carbon monoxide with mouthpiece assembly 46. EN 405:2001+A1:2009 Respiratory protective devices – Valved filtering half masks to protect against gases or gases and particles – Requirements, testing, marking 47. EN 407:2004 Protective gloves against thermal risks (heat and/or fire) 48. EN 420:2003+A1:2009 Protective gloves – General requirements and test methods 49. EN 421:2010 Protective gloves against ionizing radiation and radioactive contamination 50. EN 443:2008 Helmets for fire fighting in buildings and other structures 51. EN 469:2020 Protective clothing for firefighters – Performance requirements for protective clothing for firefighting activities 52. EN 510:2019 Specification for protective clothing for use where there is a risk of entanglement with moving parts 53. EN 511:2006 Protective gloves against cold 54. EN 564:2014 Mountaineering equipment – Accessory cord – Safety requirements and test methods 55. EN 565:2017 Mountaineering equipment – Tape – Safety requirements and test methods 56. EN 566:2017 Mountaineering equipment – Slings – Safety requirements and test methods 57. EN 567:2013 Mountaineering equipment – Rope clamps – Safety requirements and test methods 58. EN 568:2015 Mountaineering equipment – Ice anchors – Safety requirements and test methods 59. EN 569:2007 Mountaineering equipment – Pitons – Safety requirements and test methods 60. EN 659:2003+A1:2008 Protective gloves for firefighters EN 659:2003+A1:2008/AC:2009 61. EN 795:2012 Personal fall protection equipment – Anchor devices Warning: This publication does not concern the equipment described in: — type A (anchor devices with one or more stationary anchor points and with the need for structural anchors or fixing elements to fix to the structure) referred to in clauses 3.2.1, 4.4.1, 5.3; — type C (anchor devices employing horizontal flexible anchor lines) referred to in clauses 3.2.3, 4.4.3 and 5.5; — type D (anchor devices employing horizontal rigid anchor lines) referred to in clauses 3.2.4, 4.4.4 and 5.6; — any combination of the above. In respect of types A, C and D, this publication does not concern either clauses: 4.5, 5.2.2, 6, 7; Annex A or Annex ZA. Accordingly, in respect of the equipment mentioned above, there shall be no presumption of conformity with the provisions of Regulation (EU) 2016/425 because they are not considered to be PPE. 62. EN 812:2012 Industrial bump caps 63. EN 813:2008 Personal fall protection equipment – Sit harnesses 64. EN 893:2019 Mountaineering equipment – Crampons – Safety requirements and test methods 65. EN 943-1:2015+A1:2019 Protective clothing against dangerous solid, liquid and gaseous chemicals, including liquid and solid aerosols – Part 1: Performance requirements for Type 1 (gas-tight) chemical protective suits 66. EN 943-2:2019 Protective clothing against dangerous solid, liquid and gaseous chemicals, including liquid and solid aerosols – Part 2: Performance requirements for Type 1 (gas-tight) chemical protective suits for emergency teams (ET) 67. EN 958:2017 Mountaineering equipment – Energy absorbing systems for use in klettersteig (via ferrata) climbing – Safety requirements and test methods 68. EN 966:2012+A1:2012 Helmets for airborne sports 69. EN 1073-1:2016+A1:2018 Protective clothing against solid airborne particles including radioactive contamination – Part 1: Requirements and test methods for compressed air line ventilated protective clothing, protecting the body and the respiratory tract 70. EN 1073-2:2002 Protective clothing against radioactive contamination – Part 2: Requirements and test methods for non-ventilated protective clothing against particulate radioactive contamination 71. EN 1077:2007 Helmets for alpine skiers and snowboarders 72. EN 1078:2012+A1:2012 Helmets for pedal cyclists and for users of skateboards and roller skates 73. EN 1080:2013 Impact protection helmets for young children 74. EN 1082-1:1996 Protective clothing – Gloves and arm guards protecting against cuts and stabs by hand knives – Part 1: Chain mail gloves and arm guards 75. EN 1082-2:2000 Protective clothing – Gloves and arm guards protecting against cuts and stabs by hand knives – Part 2: Gloves and arm guards made of material other than chain mail 76. EN 1146:2005 Respiratory protective devices – Self-contained open-circuit compressed air breathing apparatus incorporating a hood for escape – Requirements, testing, marking 77. EN 1149-5:2018 Protective clothing – Electrostatic properties – Part 5: Material performance and design requirements 78. EN 1385:2012 Helmets for canoeing and white water sports 79. EN 1486:2007 Protective clothing for fire-fighters – Test methods and requirements for reflective clothing for specialised fire-fighting 80. EN 1497:2007 Personal fall protection equipment – Rescue harnesses 81. EN 1827:1999+A1:2009 Respiratory protective devices – Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only – Requirements, testing, marking 82. EN 1891:1998 Personal protective equipment for the prevention of falls from a height – Low stretch kernmantel ropes 83. EN 1938:2010 Personal eye protection – Goggles for motorcycle and moped users 84. EN ISO 10819:2013 Mechanical vibration and shock – Hand-arm vibration – Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand (ISO 10819:2013) EN ISO 10819:2013/A1:2019 85. EN ISO 10862:2009 Small craft – Quick release system for trapeze harness (ISO 10862:2009) 86. EN ISO 11393-2:2019 Protective clothing for users of hand-held chainsaws – Part 2: Performance requirements and test methods for leg protectors (ISO 11393-2:2018) 87. EN ISO 11393-4:2019 Protective clothing for users of hand-held chainsaws – Part 4: Performance requirements and test methods for protective gloves (ISO 11393-4:2018) 88. EN ISO 11393-5:2019 Protective clothing for users of hand-held chainsaws – Part 5: Performance requirements and test methods for protective gaiters (ISO 11393-5:2018) 89. EN ISO 11393-6:2019 Protective clothing for users of hand-held chainsaws – Part 6: Performance requirements and test methods for upper body protectors (ISO 11393-6:2018) 90. EN 12021:2014 Respiratory equipment – Compressed gases for breathing apparatus 91. EN 12083:1998 Respiratory protective devices – Filters with breathing hoses, (Non-mask mounted filters) – Particle filters, gas filters, and combined filters – Requirements, testing, marking EN 12083:1998/AC:2000 92. EN 12270:2013 Mountaineering equipment – Chocks – Safety requirements and test methods 93. EN 12275:2013 Mountaineering equipment – Connectors – Safety requirements and test methods 94. EN 12276:2013 Mountaineering equipment – Frictional anchors – Safety requirements and test methods 95. EN 12277:2015+A1:2018 Mountaineering equipment – Harnesses – Safety requirements and test methods 96. EN 12278:2007 Mountaineering equipment – Pulleys – Safety requirements and test methods 97. EN ISO 12312-1:2013 Eye and face protection – Sunglasses and related eyewear – Part 1: Sunglasses for general use (ISO 12312-1:2013) EN ISO 12312-1:2013/A1:2015 98. EN ISO 12312-2:2015 Eye and face protection – Sunglasses and related eyewear – Part 2: Filters for direct observation of the sun (ISO 12312-2:2015) 99. EN ISO 12401:2009 Small craft – Deck safety harness and safety line – Safety requirements and test methods (ISO 12401:2009) 100. EN ISO 12402-2:2020 Personal flotation devices – Part 2: Lifejackets, performance level 275 – Safety requirements (ISO 12402-2:2020) Notice: Application of clause 5.6 of this standard does not confer a presumption of conformity with the basic health and safety requirement set out in point 1.1.1. of Annex II to Regulation (EU) 2016/425. Application of clauses 5.1.2, 5.1.3, 5.1.5, 5.1.7, 5.2, 5.3.1.1, 5.3.1.2, 5.3.2.2, 5.3.2.3, 5.3.4.3, 5.3.4.4, 5.6.1.4, 5.6.1.7, 5.6.1.8, 5.6.1.9, 5.6.1.10 and 5.6.1.11 of this standard does not confer a presumption of conformity with the basic health and safety requirement set out in point 1.2.1. of Annex II to Regulation (EU) 2016/425. Application of clauses 5.1.2, 5.2, 5.3.1.1, 5.3.2.2, 5.3.4.2, 5.3.4.4, 5.6.3 and 5.7 of this standard does not confer a presumption of conformity with the basic health and safety requirement set out in point 3.4 of Annex II to Regulation (EU) 2016/425. 101. EN ISO 12402-3:2020 Personal flotation devices – Part 3: Lifejackets, performance level 150 – Safety requirements (ISO 12402-3:2020) Notice: Application of clause 5.6 of this standard does not confer a presumption of conformity with the basic health and safety requirement set out in point 1.1.1. of Annex II to Regulation (EU) 2016/425. Application of clauses 5.1.2, 5.1.3, 5.1.5, 5.1.7, 5.2, 5.3.1.1, 5.3.1.2, 5.3.2.2, 5.3.2.3, 5.3.4.3, 5.3.4.4, 5.6.1.4, 5.6.1.7, 5.6.1.8, 5.6.1.9, 5.6.1.10 and 5.6.1.11 of this standard does not confer a presumption of conformity with the basic health and safety requirement set out in point 1.2.1. of Annex II to Regulation (EU) 2016/425. Application of clauses 5.1.2, 5.2, 5.3.1.1, 5.3.2.2, 5.3.4.2, 5.3.4.4, 5.6.3 and 5.7 of this standard does not confer a presumption of conformity with the basic health and safety requirement set out in point 3.4 of Annex II to Regulation (EU) 2016/425. 102. EN ISO 12402-4:2020 Personal flotation devices – Part 4: Lifejackets, performance level 100 – Safety requirements (ISO 12402-4:2020) Notice: Application of clause 5.6 of this standard does not confer a presumption of conformity with the basic health and safety requirement set out in point 1.1.1. of Annex II to Regulation (EU) 2016/425. Application of clauses 5.1.2, 5.1.3, 5.1.5, 5.1.7, 5.2, 5.3.1.1, 5.3.1.2, 5.3.2.2, 5.3.2.3, 5.3.4.3, 5.3.4.4, 5.6.1.4, 5.6.1.7, 5.6.1.8, 5.6.1.9, 5.6.1.10 and 5.6.1.11 of this standard does not confer a presumption of conformity with the basic health and safety requirement set out in point 1.2.1. of Annex II to Regulation (EU) 2016/425. Application of clauses 5.1.2, 5.2, 5.3.1.1, 5.3.2.2, 5.3.4.2, 5.3.4.4, 5.6.3 and 5.7 of this standard does not confer a presumption of conformity with the basic health and safety requirement set out in point 3.4 of Annex II to Regulation (EU) 2016/425. 103. EN ISO 12402-5:2020 Personal flotation devices – Part 5: Buoyancy aids (level 50) – Safety requirements (ISO 12402-5:2020) 104. EN ISO 12402-6:2020 Personal flotation devices – Part 6: Special application lifejackets and buoyancy aids – Safety requirements and additional test methods (ISO 12402-6:2020) 105. EN ISO 12402-8:2020 Personal flotation devices – Part 8: Accessories – Safety requirements and test methods (ISO 12402-8:2020) 106. EN 12477:2001 Protective gloves for welders EN 12477:2001/A1:2005 107. EN 12492:2012 Mountaineering equipment – Helmets for mountaineers – Safety requirements and test methods 108. EN 12841:2006 Personal fall protection equipment – Rope access systems – Rope adjustment devices 109. EN 12941:1998 Respiratory protective devices – Powered filtering devices incorporating a helmet or a hood – Requirements, testing, marking EN 12941:1998/A1:2003 EN 12941:1998/A2:2008 110. EN 12942:1998 Respiratory protective devices – Power assisted filtering devices incorporating full face masks, half masks or quarter masks – Requirements, testing, marking EN 12942:1998/A1:2002 EN 12942:1998/A2:2008 111. EN 13034:2005+A1:2009 Protective clothing against liquid chemicals – Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment) 112. EN 13061:2009 Protective clothing – Shin guards for association football players – Requirements and test methods 113. EN 13138-1:2021 Buoyant aids for swimming instruction – Part 1: Safety requirements and test methods for buoyant aids to be worn EN 13138-1:2021/AC:2022 114. EN 13158:2018 Protective clothing – Protective jackets, body and shoulder protectors for equestrian use, for horse riders and those working with horses, and for horse drivers – Requirements and test methods 115. EN 13178:2000 Personal eye-protection – Eye protectors for snowmobile users 116. EN 13277-1:2000 Protective equipment for martial arts – Part 1: General requirements and test methods 117. EN 13277-2:2000 Protective equipment for martial arts – Part 2: Additional requirements and test methods for instep protectors, shin protectors and forearm protectors 118. EN 13277-3:2013 Protective equipment for martial arts – Part 3: Additional requirements and test methods for trunk protectors 119. EN 13277-4:2001 Protective equipment for martial arts – Part 4: Additional requirements and test methods for head protectors EN 13277-4:2001/A1:2007 120. EN 13277-5:2002 Protective equipment for martial arts – Part 5: Additional requirements and test methods for genital protectors and abdominal protectors 121. EN 13277-6:2003 Protective equipment for martial arts – Part 6: Additional requirements and test methods for breast protectors for females 122. EN 13277-7:2009 Protective equipment for martial arts – Part 7: Additional requirements and test methods for hand and foot protectors 123. EN 13277-8:2017 Protective equipment for martial arts – Part 8: Additional requirements and test methods for karate face protectors 124. EN 13484:2012 Helmets for users of luges 125. EN 13546:2002+A1:2007 Protective clothing – Hand, arm, chest, abdomen, leg, foot and genital protectors for field hockey goal keepers, and shin protectors for field players – Requirements and test methods 126. EN 13567:2002+A1:2007 Protective clothing – Hand, arm, chest, abdomen, leg, genital and face protectors for fencers – Requirements and test methods 127. EN 13594:2015 Protective gloves for motorcycle riders – Requirements and test methods 128. EN 13634:2017 Protective footwear for motorcycle riders – Requirements and test methods 129. EN ISO 13688:2013 Protective clothing – General requirements (ISO 13688:2013) EN ISO 13688:2013/A1:2021 130. EN 13781:2012 Protective helmets for drivers and passengers of snowmobiles and bobsleighs 131. EN 13794:2002 Respiratory protective devices – Self-contained closed-circuit breathing apparatus for escape – Requirements, testing, marking 132. EN 13832-2:2018 Footwear protecting against chemicals – Part 2: Requirements for limited contact with chemicals 133. EN 13832-3:2018 Footwear protecting against chemicals – Part 3: Requirements for prolonged contact with chemicals 134. EN 13949:2003 Respiratory equipment – Open-circuit self-contained diving apparatus for use with compressed Nitrox and oxygen – Requirements, testing, marking 135. EN ISO 13982-1:2004 Protective clothing for use against solid particulates – Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing) (ISO 13982-1:2004) EN ISO 13982-1:2004/A1:2010 136. EN ISO 13998:2003 Protective clothing – Aprons, trousers and vests protecting against cuts and stabs by hand knives (ISO 13998:2003) 137. EN 14021:2003 Stone shields for off-road motorcycling suited to protect riders against stones and debris – Requirements and test methods 138. EN 14052:2012+A1:2012 High performance industrial helmets 139. EN 14058:2017 Protective clothing – Garments for protection against cool environments 140. EN 14120:2003+A1:2007 Protective clothing – Wrist, palm, knee and elbow protectors for users of roller sports equipment – Requirements and test methods 141. EN 14126:2003 Protective clothing – Performance requirements and tests methods for protective clothing against infective agents EN 14126:2003/AC:2004 142. EN 14143:2013 Respiratory equipment – Self-contained re-breathing diving apparatus 143. EN 14225-1:2017 Diving suits – Part 1: Wet suits – Requirements and test methods 144. EN 14225-2:2017 Diving suits – Part 2: Dry suits – Requirements and test methods 145. EN 14225-3:2017 Diving suits – Part 3: Actively heated or cooled suit systems and components – Requirements and test methods 146. EN 14328:2005 Protective clothing – Gloves and armguards protecting against cuts by powered knives – Requirements and test methods 147. EN 14387:2004+A1:2008 Respiratory protective devices – Gas filter(s) and combined filter(s) – Requirements, testing, marking 148. EN 14435:2004 Respiratory protective devices – Self-contained open-circuit compressed air breathing apparatus with half mask designed to be used with positive pressure only – Requirements, testing, marking 149. EN 14458:2018 Personal eye-equipment – High performance visors intended only for use with protective helmets 150. EN ISO 14460:1999 Protective clothing for automobile racing drivers – Protection against heat and flame – Performance requirements and test methods (ISO 14460:1999) EN ISO 14460:1999/AC:1999 EN ISO 14460:1999/A1:2002 151. EN 14529:2005 Respiratory protective devices – Self-contained open-circuit compressed air breathing apparatus with half mask designed to include a positive pressure lung governed demand valve for escape purposes only 152. EN 14593-1:2005 Respiratory protective devices – Compressed air line breathing apparatus with demand valve – Part 1: Apparatus with a full face mask – Requirements, testing, marking 153. EN 14594:2018 Respiratory protective devices – Continuous flow compressed air line breathing devices – Requirements, testing and marking 154. EN 14605:2005+A1:2009 Protective clothing against liquid chemicals – performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, including items providing protection to parts of the body only (Types PB [3] and PB [4]) 155. EN ISO 14877:2002 Protective clothing for abrasive blasting operations using granular abrasives (ISO 14877:2002) 156. EN ISO 15027-1:2012 Immersion suits – Part 1: Constant wear suits, requirements including safety (ISO 15027-1:2012) 157. EN ISO 15027-2:2012 Immersion suits – Part 2: Abandonment suits, requirements including safety (ISO 15027-2:2012) 158. EN 15090:2012 Footwear for firefighters 159. EN 15151-1:2012 Mountaineering equipment – Braking devices – Part 1: Braking devices with manually assisted locking, safety requirements and test methods 160. EN 15333-1:2008 Respiratory equipment – Open-circuit umbilical supplied compressed gas diving apparatus – Part 1: Demand apparatus EN 15333-1:2008/AC:2009 161. EN 15333-2:2009 Respiratory equipment – Open-circuit umbilical supplied compressed gas diving apparatus – Part 2: Free flow apparatus 162. EN 15613:2008 Knee and elbow protectors for indoor sports – Safety requirements and test methods 163. EN 16027:2011 Protective clothing – Gloves with protective effect for association football goal keepers 164. EN ISO 16321-1:2022 Eye and face protection for occupational use – Part 1: General requirements (ISO 16321-1:2021) 165. EN ISO 16321-2:2021 Eye and face protection for occupational use – Part 2: Additional requirements for protectors used during welding and related techniques (ISO 16321-2:2021) Notice: This standard makes reference to normative reference EN ISO 16321-1:2020, the date of which is incorrect. It shall be read as EN ISO 16321-1:2022 instead. 166. EN ISO 16321-3:2022 Eye and face protection for occupational use – Part 3: Additional requirements for mesh protectors (ISO 16321-3:2021) Notice: This standard makes reference to normative reference EN ISO 16321-1:2020, the date of which is incorrect. It shall be read as EN ISO 16321-1:2022 instead. 167. EN 16350:2014 Protective gloves – Electrostatic properties 168. EN 16473:2014 Firefighters helmets – Helmets for technical rescue 169. EN 16716:2017 Mountaineering equipment – Avalanche airbag systems – Safety requirements and test methods 170. EN 17092-2:2020 Protective garments for motorcycle riders – Part 2: Class AAA garments – Requirements 171. EN 17092-3:2020 Protective garments for motorcycle riders – Part 3: Class AA garments – Requirements 172. EN 17092-4:2020 Protective garments for motorcycle riders – Part 4: Class A garments – Requirements 173. EN 17092-5:2020 Protective garments for motorcycle riders – Part 5: Class B garments – Requirements 174. EN 17092-6:2020 Protective garments for motorcycle riders – Part 6: Class C garments – Requirements 175. EN 17109:2020 Mountaineering equipment – Individual safety systems for rope courses – Safety requirements and test methods 176. EN ISO 17249:2013 Safety footwear with resistance to chain saw cutting (ISO 17249:2013) EN ISO 17249:2013/AC:2014 177. EN 17353:2020 Protective clothing – Enhanced visibility equipment for medium risk situations – Test methods and requirements 178. EN 17520:2021 Mountaineering equipment – Personal belay lanyards – Safety requirements and test methods 179. EN ISO 18527-1:2022 Eye and face protection for sports use – Part 1: Requirements for downhill skiing and snowboarding goggles (ISO 18527-1:2021) 180. EN ISO 18527-2:2021 Eye and face protection for sports use – Part 2: Requirements for eye protectors for squash and eye protectors for racquetball and squash 57 (ISO 18527-2:2021) 181. EN ISO 20320:2020 Protective clothing for use in Snowboarding – Wrist Protectors – Requirements and test methods (ISO 20320:2020) 182. EN ISO 20345:2022 Personal protective equipment – Safety footwear (ISO 20345:2021) 183. EN ISO 20346:2014 Personal protective equipment – Protective footwear (ISO 20346:2014) 184. EN ISO 20347:2012 Personal protective equipment – Occupational footwear (ISO 20347:2012) 185. EN ISO 20349-1:2017 Personal protective equipment – Footwear protecting against risks in foundries and welding – Part 1: Requirements and test methods for protection against risks in foundries (ISO 20349-1:2017) EN ISO 20349-1:2017/A1:2020 186. EN ISO 20349-2:2017 Personal protective equipment – Footwear protecting against risks in foundries and welding – Part 2: Requirements and test methods for protection against risks in welding and allied processes (ISO 20349-2:2017) EN ISO 20349-2:2017/A1:2020 187. EN ISO 20471:2013 High visibility clothing – Test methods and requirements (ISO 20471:2013, Corrected version 2013-06-01) EN ISO 20471:2013/A1:2016 188. EN ISO 27065:2017 Protective clothing – Performance requirements for protective clothing worn by operators applying pesticides and for re-entry workers (ISO 27065:2017) EN ISO 27065:2017/A1:2019 189. EN 50321-1:2018 Live working – Footwear for electrical protection – Insulating footwear and overboots EN 50321-1:2018/AC:2018-08 190. EN 61482-2:2020 Live working – Protective clothing against the thermal hazards of an electric arc – Part 2: Requirements (IEC 61482-2:2018, Modified)

ANNEX IISupplementary provisions

ANNEX II No Reference of the standard Date of withdrawal 1 EN 143:2000 Respiratory protective devices – Particle filters – Requirements, testing, marking EN 143:2000/AC:2005 EN 143:2000/A1:2006 9.6.2024 2 EN 166:2001 Personal eye-protection – Specifications 11.11.2024 3 EN 169:2002 Personal eye-protection – Filters for welding and related techniques – Transmittance requirements and recommended use 11.11.2024 4 EN 170:2002 Personal eye-protection – Ultraviolet filters – Transmittance requirements and recommended use 11.11.2024 5 EN 172:1994 Personal eye protection – Sunglare filters for industrial use EN 172:1994/A1:2000 EN 172:1994/A2:2001 11.11.2024 6 EN 174:2001 Personal eye-protection – Ski goggles for downhill skiing 11.11.2024 7 EN 352-1:2002 Hearing protectors – General requirements – Part 1: Ear-Muffs 21.7.2024 8 EN 352-2:2002 Hearing protectors – General requirements – Part 2: Ear-plugs 21.7.2024 9 EN 352-3:2002 Hearing protectors – General requirements – Part 3: Ear-muffs attached to an industrial safety helmet 21.7.2024 10 EN 352-4:2001 Hearing protectors – Safety requirements and testing – Part 4: Level-dependent ear-muffs EN 352-4:2001/A1:2005 21.7.2024 11 EN 352-5:2002 Hearing protectors – Safety requirements and testing – Part 5: Active noise reduction ear-muffs EN 352-5:2002/A1:2005 21.7.2024 12 EN 352-6:2002 Hearing protectors – Safety requirements and testing – Part 6: Ear-muffs with electrical audio input 21.7.2024 13 EN 352-7:2002 Hearing protectors – Safety requirements and testing – Part 7: Level-dependent ear-plugs 21.7.2024 14 EN 352-8:2008 Hearing protectors – Safety requirements and testing – Part 8: Entertainment audio ear-muffs 21.7.2024 15 EN 379:2003+A1:2009 Personal eye-protection – Automatic welding filters 11.11.2024 16 EN 1731:2006 Personal eye protection – Mesh eye and face protectors 11.11.2024 17 EN ISO 13688:2013 Protective clothing – General requirements (ISO 13688:2013) 9.6.2024 18 EN ISO 20345:2011 Personal protective equipment – Safety footwear (ISO 20345:2011) 11.11.2024

Other acts of the same type

Council Decision (EU) 2019/2107 of 28 November 2019 on the position to be taken on behalf of the European Union within the Council of the International Civil Aviation Organization as regards the revision of Chapter 9 of Annex 9 (Facilitation) to the Convention on International Civil Aviation in respect of standards and recommended practices on passenger name record data Commission Implementing Decision (EU) 2019/1973 of 27 November 2019 not approving silver copper zeolite as an existing active substance for use in biocidal products of product-types 2 and 7 (Text with EEA relevance)Decision (EU) 2020/28 of the European Parliament and of the Council of 27 November 2019 on the mobilisation of the European Union Solidarity Fund to provide assistance to Greece Decision (EU) 2020/264 of the European Parliament and of the Council of 27 November 2019 on the mobilisation of the European Union Solidarity Fund to provide for the payment of advances in the general budget of the Union for 2020 Decision (EU) 2020/265 of the European Parliament and of the Council of 27 November 2019 on the mobilisation of the Flexibility Instrument to finance immediate budgetary measures to address the ongoing challenges of migration, refugee inflows and security threats Commission Implementing Decision (EU) 2019/1959 of 26 November 2019 not approving silver sodium hydrogen zirconium phosphate as an existing active substance for use in biocidal products of product-types 2 and 7 (Text with EEA relevance)Commission Implementing Decision (EU) 2019/1960 of 26 November 2019 not approving silver zeolite as an existing active substance for use in biocidal products of product-types 2 and 7 (Text with EEA relevance)Commission Implementing Decision (EU) 2019/1969 of 26 November 2019 postponing the expiry date of approval of IPBC for use in biocidal products of product-type 8 (Text with EEA relevance)Commission Implementing Decision (EU) 2019/2032 of 26 November 2019 establishing measures to prevent the introduction into and the spread within the Union of Fusarium circinatum Nirenberg & O’Donnell (formerly Gibberella circinata) and repealing Decision 2007/433/EC (notified under document C(2019) 8359)Council Decision (CFSP) 2019/1944 of 25 November 2019 amending Decision (CFSP) 2016/1693 concerning restrictive measures against ISIL (Da’esh) and Al-Qaeda and persons, groups, undertakings and entities associated with them Commission Implementing Decision (EU) 2019/1950 of 25 November 2019 postponing the expiry date of approval of K-HDO for use in biocidal products of product-type 8 (Text with EEA relevance)Commission Implementing Decision (EU) 2019/1951 of 25 November 2019 postponing the expiry date of approval of tebuconazole for use in biocidal products of product-type 8 (Text with EEA relevance)

Source: EUR-Lex (Publications Office of the EU), © European Union, reuse permitted under Commission Decision 2011/833/EU.

What to look at next

Browse all EU Legal ActsEvery instrument by type and year, full text free to read section by sectionEuropean Union legislation EU Legal Acts by type and yearGrouped by instrument type and year of enactment, so you can find others of the same kindBrowse by type and year European Union: what this database coversWhich datasets are here, which official source they come from, and how current they areEuropean Union overview