My bookmarksSign up free

Commission Implementing Regulation (EU) 2023/566 of 10 March 2023 amending Implementing Regulation (EU) 2015/1998 as regards certain detailed measures for the implementation of the common basic standards on aviation security (Text with EEA relevance)

Commission Implementing Regulation (EU) 2023/566 of 10 March 2023 amending Implementing Regulation (EU) 2015/1998 as regards certain detailed measures for the implementation of the common basic standards on aviation security (Text with EEA relevance)

Implementing Regulation (EU) 2023/566 · Regulation · 3 articles

Data as of 2026-07-04 · Compiled from an official source version. Later amendments or repeals may not be reflected; the official text prevails. · Read the official text ↗

Article 1

The Annex to Implementing Regulation (EU) 2015/1998 is amended in accordance with the Annex to this Regulation.

Article 2

This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union . It shall apply from 1 April 2023.

Supplementary provisions

ANNEXSupplementary provisions

ANNEX The Annex to Implementing Regulation (EU) 2015/1998 is amended as follows: (1) points 1.3.1.4 and 1.3.1.5 are replaced by the following: ‘1.3.1.4. Items carried by persons other than passengers shall be screened by one of the following means: (a) hand search; (b) x-ray equipment; (c) explosive detection systems (EDS) equipment; (d) automated prohibited items detection (APID) software in combination with point (c); (e) explosive detection dogs; (f) explosive trace detection (ETD) equipment. Where the screener cannot determine whether or not the items carried contains any prohibited articles, it shall be rejected or rescreened to the screener’s satisfaction. 1.3.1.5. Points 4.1.2.4 to 4.1.2.7 and 4.1.2.11 to 4.1.2.12 shall apply to the screening of items carried by persons other than passengers.’; (2) point 4.1.1.1 is replaced by the following: ‘4.1.1.1. Before screening, outer wear shall be taken off and shall be screened as cabin baggage, unless the concept of operations of equipment allows for outer wear to be kept on. The screener may request the passenger to undertake further divesting as appropriate.’; (3) point 4.1.2.3 is replaced by the following: ‘4.1.2.3. Cabin baggage shall be screened by at least one of the following methods: (a) a hand search; (b) x-ray equipment; (c) explosive detection systems (EDS) equipment; (d) automated prohibited items detection (APID) software in combination with point (c); (e) explosive detection dogs in combination with point (a); (f) ETD equipment. Where the screener cannot determine whether or not the cabin baggage contains any prohibited articles, it shall be rejected or rescreened to the screener’s satisfaction.’; (4) points 4.1.2.5 and 4.1.2.6 are replaced by the following: ‘4.1.2.5. Where x-ray equipment is used, each image shall be viewed by the screener. Where EDS equipment is used, each image shall be viewed by the screener or analysed by automated prohibited items detection (APID) software. 4.1.2.6. Where APID software is used, all alarms as referred to in point 12.13.1.1 shall be resolved to the satisfaction of the screener so as to reasonably ensure that no prohibited articles are carried into the SRA or on board an aircraft. Where EDS equipment is used, all alarms as referred to in point 12.4.1.3 shall be resolved by screening the baggage again using an additional screening method. Where EDS equipment has been installed before 1 July 2023 and is used without APID software, all alarms as referred to in point 12.4.1.3 shall be resolved to the satisfaction of the screener so as to reasonably ensure that no prohibited articles are carried into the SRA or on board an aircraft. When the identity of an article is unclear, the alarms shall be resolved by screening the baggage again using an additional screening method.’; (5) point 4.1.2.12 is replaced by the following: ‘4.1.2.12. Where APID software is used in combination with EDS equipment meeting either of standards C1, C1+, C2 or C2+, the operator or entity using equipment shall ensure that the procedures are in accordance with the concept of operations of these standards as regards screening of large electronic items and screening of LAGs.’; (6) the following point 4.1.2.13 is added: ‘4.1.2.13. The screening of cabin baggage shall also be subject to the additional provisions laid down in Commission Implementing Decision C(2015) 8005.’; (7) point 6.2.1.5 is amended as follows: (a) point (g) is replaced by the following: ‘(g) metal detection equipment (MDE);’; (b) the following point is added: ‘(h) EVD equipment.’; (8) in point 6.3.2.6 (e), point (iv) is replaced by the following: ‘(iv) the means or method of screening used, as follows: — hand search (PHS); — X-ray equipment (XRY); — EDS equipment (EDS); — explosive detection dogs (EDD); — ETD equipment (ETD); — visual check (VCK); — metal detection equipment (CMD); — EVD equipment (EVD); — any other method (AOM) in accordance with point 6.2.1.6 where the method used shall be specified; or’; (9) in point 6.8.7.2, the following sentence is added: ‘An air carrier shall not load for carriage into the Union such consignment, unless the required measures as set out in points 6.8.7.3 and 6.8.7.4, as applicable, have been implemented satisfactorily.’; (10) Attachment 6-E, second paragraph, is amended as follows: (a) the introductory wording is replaced by the following: ‘When collecting, carrying, storing and delivering air cargo/mail to which security controls have been applied [on behalf of name of regulated agent/air carrier applying security controls for cargo or mail/known consignor ], I confirm that the following security procedures will be adhered to:’; (b) the seventh indent is amended as follows: (1) point (a) is replaced by the following: ‘(a) has a haulier agreement with the regulated agent or known consignor responsible for the transport [same name as above]; or’; (2) point (c) is replaced by the following: ‘(c) has a haulier agreement with the undersigned haulier requiring that the third party will not subcontract further and implements the security procedures contained in this declaration. The undersigned haulier retains full responsibility for the entire transport on behalf of the regulated agent or known consignor; and’; (11) point 8.1.2.3 is amended as follows: (a) point (f) is replaced by the following: ‘(f) explosive detection dogs in combination with point (a);’; (b) the following point (g) is added: ‘(g) EVD equipment applied in accordance with the relevant provisions contained in Attachment 6-J and in combination with point (a).’; (12) point 9.1.2.3 is amended as follows: (a) point (f) is replaced by the following: ‘(f) explosive detection dogs in combination with point (a);’; (b) the following point (g) is added: ‘(g) EVD equipment applied in accordance with the relevant provisions contained in Attachment 6-J and in combination with point (a).’; (13) in point 11.5.1, the second sentence is replaced by: ‘Certification shall at least apply to those instructors authorised to give training defined in points 11.2.3.1 to 11.2.3.5 and in points 11.2.4 (unless it concerns the training of supervisors exclusively supervising persons referred to in points 11.2.3.6 to 11.2.3.11) and 11.2.5.’; (14) point 12.0.2.1 is replaced by: ‘12.0.2.1. Subject to point 12.0.5, the following security equipment and software may be installed after 1 October 2020 only if it has been granted an ‘EU Stamp’ marking or an ‘EU Stamp pending’ marking status as referred to in point 12.0.2.5: (a) walk-through metal detection (WTMD) equipment; (b) explosive detection systems (EDS) equipment; (c) explosive trace detection (ETD) equipment; (d) liquid explosive detection systems (LEDS) equipment; (e) metal detection equipment (MDE); (f) security scanners; (g) shoe scanner equipment; (h) explosive vapour detection (EVD) equipment; (i) automated prohibited items detections (APID) software.’; (15) point 12.4.1.1 is replaced by the following: ‘12.4.1.1. Explosive detection systems equipment (EDS) shall be able to detect and to indicate by means of an alarm specified and higher individual quantities of explosive or chemical material contained in baggage or other consignments.’; (16) point 12.4.1.2 is replaced by the following: ‘12.4.1.2. The detection shall be independent of the shape, position or orientation of the explosive or chemical material.’; (17) in point 12.4.1.3, the first and the second indents are replaced by the following: ‘— when it detects explosive or chemical material, and — when it detects the presence of an item that prevents explosive or chemical material from being detected, and’; (18) point 12.6.1 is amended as follows: (a) the first sentence is replaced by the following: ‘ETD equipment shall be able to collect and analyse trace levels of particles from contaminated surfaces, or the contents of baggage or consignments, and indicate, by means of an alarm, the presence of explosives or chemicals.’; (b) the sentence following point (b) is replaced by the following: ‘There shall be standards for ETD set for particulate sampling. Detailed requirements for these standards are laid down in Commission Implementing Decision C(2015) 8005.’; (19) point 12.6.2 is replaced by the following: ‘12.6.2. The standard for ETD equipment for the detection of explosives, that uses particulate sampling, shall apply to ETD equipment deployed from 1 September 2014. The standard for ETD equipment for the detection of chemicals, that uses particulate sampling, shall apply as of 1 July 2024 to ETD equipment deployed from 1 September 2014.’; (20) Chapters 12.13 and 12.14 are replaced by the following: ‘12.13. AUTOMATED PROHIBITED ITEMS DETECTION (APID) SOFTWARE 12.13.1. General principles 12.13.1.1. Automated Prohibited Items Detection (APID) software shall be able to detect and to indicate by means of an alarm prohibited items contained in baggage or other consignments. 12.13.2. Standards for APID software 12.13.2.1. There shall be three standards for APID software. Detailed requirements on these standards are laid down in Commission Implementing Decision C(2015) 8005. 12.14. EXPLOSIVE VAPOUR DETECTION (EVD) EQUIPMENT 12.14.1. General principles 12.14.1.1. Explosives Vapour Detection (EVD) equipment shall be able to collect samples of air and analyse the collected sample for vapour, aerosols and/or airborne particles indicating the presence of explosives and explosive related materials. If trace levels of explosives or explosive related materials are found in the sample, the EVD equipment shall indicate an alarm. 12.14.1.2. For the purpose of screening with EVD equipment, the following requirements shall apply: (a) EVD equipment shall only be used in an environment and for the purpose for which it has been approved, i.e. screening of: — Passengers and persons other than passengers (EVD-PX); — Cabin baggage (EVD-CB); — Hold baggage (EVD-HB); — Air cargo and mail, air carrier mail and air carrier materials, in-flight supplies and airport supplies (EVD-CS); (b) consumables shall not be used beyond the recommendations of their manufacturer or if the performance of the consumable appears to have deteriorated through use. 12.14.2. Standards for EVD 12.14.2.1. All EVD equipment used for the screening of hold baggage, air cargo and mail, air carrier mail and air carrier materials loaded in the aircraft hold, in-flight supplies as well as airport supplies shall meet at least standard 1. 12.14.2.2. All EVD equipment used for the screening of passengers and persons other than passengers as well as cabin baggage shall meet at least standard 3. 12.14.2.3. Detailed requirements on these standards are laid down in Commission Implementing Decision C(2015) 8005.’; (21) Attachment 12-M is replaced by the following:   ‘ ATTACHMENT 12-M   Detailed provisions for performance requirements for APID are laid down in Commission Implementing Decision C(2015) 8005.’

Other acts of the same type
Commission Implementing Regulation (EU) 2025/457 of 10 March 2025 renewing the approval of dinotefuran as an active substance for use in biocidal products of product-type 18 in accordance with Regulation (EU) No 528/2012 of the European Parliament and of the CouncilCommission Implementing Regulation (EU) 2025/458 of 10 March 2025 correcting certain language versions of Implementing Regulation (EU) 2019/773 on the technical specification for interoperability relating to the operation and traffic management subsystem of the rail system within the European UnionCommission Regulation (EU) 2025/447 of 7 March 2025 amending Regulations (EC) No 2150/2002 and (EC) No 1552/2005 of the European Parliament and of the Council, as well as Commission Regulations (EC) No 1726/1999, (EC) No 1916/2000, (EC) No 198/2006, (EC) No 1062/2008 and (EU) No 349/2011, as regards references to the statistical classification of economic activities NACE Revision 2 established by Regulation (EC) No 1893/2006 of the European Parliament and of the CouncilCommission Implementing Regulation (EU) 2025/454 of 7 March 2025 laying down the rules for the application of Regulation (EU) 2024/1689 of the European Parliament and of the Council as regards the establishment of a scientific panel of independent experts in the field of artificial intelligenceCommission Implementing Regulation (EU) 2025/455 of 7 March 2025 granting a Union authorisation for the single biocidal product SatPax® 70/30 IPA in accordance with Regulation (EU) No 528/2012 of the European Parliament and of the CouncilCommission Implementing Regulation (EU) 2025/441 of 6 March 2025 providing for emergency financial support for the agricultural sectors affected by adverse climatic events and natural disasters in Spain, Croatia, Cyprus, Latvia and Hungary, in accordance with Regulation (EU) No 1308/2013 of the European Parliament and of the CouncilCommission Implementing Regulation (EU) 2025/431 of 5 March 2025 correcting Implementing Regulation (EU) 2025/120 imposing a definitive anti-dumping duty on imports of electric bicycles, originating in the People’s Republic of China following an expiry review pursuant to Article 11(2) of Regulation (EU) 2016/1036 of the European Parliament and of the CouncilCommission Implementing Regulation (EU) 2025/470 of 5 March 2025 on the registration of the geographical indication Aydın Memecik Zeytini (PDO) in the Union register of geographical indications pursuant to Regulation (EU) 2024/1143 of the European Parliament and of the CouncilCommission Implementing Regulation (EU) 2025/427 of 4 March 2025 granting a Union authorisation for the biocidal product family Orochemie hand disinfectants in accordance with Regulation (EU) No 528/2012 of the European Parliament and of the CouncilCommission Implementing Regulation (EU) 2025/411 of 3 March 2025 amending Implementing Regulation (EU) 2015/2447 as regards adding Georgia to the list of countries in the guarantor’s undertakings for transitCommission Implementing Regulation (EU) 2025/412 of 3 March 2025 making imports of Acrylonitrile-Butadiene-Styrene Resins originating in the Republic of Korea and Taiwan subject to registrationCommission Implementing Regulation (EU) 2025/446 of 28 February 2025 amending Annexes V and XIV to Implementing Regulation (EU) 2021/404 as regards the entries for Bosnia and Herzegovina, Canada, the United Kingdom and the United States in the lists of third countries, territories or zones thereof authorised for the entry into the Union of consignments of poultry and germinal products of poultry, and of fresh meat of poultry and game birds

Source: EUR-Lex (Publications Office of the EU), © European Union, reuse permitted under Commission Decision 2011/833/EU.

Contents

What to look at next