1.
In addition to the restrictions set out in Annex XVII to Regulation (EC) No 1907/2006 and in Article 4(2), point (a), of Directive 2000/53/EC, batteries shall not contain substances for which Annex I to this Regulation contains a restriction unless the conditions of that restriction are complied with.
2.
In the event of an unacceptable risk to human health or the environment, arising from the use of a substance in the manufacture of batteries or from the presence of a substance in the batteries when they are placed on the market, or arising during their subsequent life cycle stages, including during repurposing or the treatment of waste batteries, that is not adequately controlled and needs to be addressed on a Union-wide basis, the Commission shall adopt a delegated act in accordance with Article 89 to amend the restrictions in Annex I, pursuant to the procedure laid down in Articles 86, 87 and 88.
3.
Restrictions adopted pursuant to paragraph 2 of this Article shall not apply to the use of a substance in scientific research and development as defined in Article 3, point (23), of Regulation (EC) No 1907/2006, carried out in relation to batteries.
4.
Where a restriction adopted pursuant to paragraph 2 of this Article does not apply to product and process orientated research and development, as defined in Article 3, point (22), of Regulation (EC) No 1907/2006, that exemption, as well as the maximum quantity of the substance exempted, shall be specified in Annex I to this Regulation.
5.
By 31 December 2027, the Commission, assisted by the European Chemicals Agency set up under Regulation (EC) No 1907/2006 (‘the Agency’), shall prepare a report on substances of concern, namely substances having an adverse effect on human health or the environment or hampering recycling for safe and high quality secondary raw materials, present in batteries or used in their manufacture. The Commission shall submit that report to the European Parliament and to the Council detailing its findings and shall consider the appropriate follow-up measures including the adoption of delegated acts as referred to in paragraph 2 of this Article.
Carbon footprint of electric vehicle batteries, rechargeable industrial batteries and LMT batteries
1.
For electric vehicle batteries, rechargeable industrial batteries with a capacity greater than 2 kWh and LMT batteries a carbon footprint declaration shall be drawn up for each battery model per manufacturing plant, in accordance with the implementing act referred to in the fourth subparagraph and containing, at least, the following information:
(a)
administrative information about the manufacturer;
(b)
information about the battery model;
(c)
information about the geographic location of the battery manufacturing plant;
(d)
the carbon footprint of the battery, calculated as kg of carbon dioxide equivalent per one kWh of the total energy provided by the battery over its expected service life;
(e)
the carbon footprint of the battery differentiated according to life cycle stage as described in point 4 of Annex II;
(f)
the identification number of the EU declaration of conformity of the battery;
(g)
a web link giving access to a public version of the study supporting the carbon footprint values referred to in points (d) and (e).
The carbon footprint declaration shall apply from:
(a)
18 February 2025 or 12 months after the date of entry into force either of the delegated act or of the implementing act respectively referred to in the fourth subparagraph, points (a) and (b), whichever is the latest, for electric vehicle batteries;
(b)
18 February 2026 or 18 months after the date of entry into force either of the delegated act or of the implementing act respectively referred to in the fourth subparagraph, points (a) and (b), whichever is the latest, for rechargeable industrial batteries except those with exclusively external storage;
(c)
18 August 2028 or 18 months after the date of entry into force either of the delegated act or of the implementing act respectively referred to in the fourth subparagraph, points (a) and (b), whichever is the latest, for LMT batteries;
(d)
18 August 2030 or 18 months after the date of entry into force either of the delegated act or of the implementing act respectively referred to in the fourth subparagraph, points (a) and (b), whichever is the latest, for rechargeable industrial batteries with external storage.
Until it becomes accessible via the QR code referred to in Article 13(6), the carbon footprint declaration shall accompany the battery.
The Commission shall, by 18 February 2024 for electric vehicle batteries, 18 February 2025 for rechargeable industrial batteries, except those with external storage, 18 February 2027 for LMT batteries and 18 February 2029 for industrial batteries with external storage, adopt:
(a)
a delegated act in accordance with Article 89 to supplement this Regulation by establishing the methodology for the calculation and verification of the carbon footprint of the battery referred to in the first subparagraph, point (d), in accordance with the essential elements set out in Annex II;
(b)
an implementing act establishing the format for the carbon footprint declaration referred to in the first subparagraph. That implementing act shall be adopted in accordance with the examination procedure referred to in Article 90(3).
2.
Electric vehicle batteries, rechargeable industrial batteries with a capacity greater than 2 kWh and LMT batteries shall bear a conspicuous, clearly legible and indelible label indicating the carbon footprint of the battery referred to in paragraph 1, first subparagraph, point (d) and declaring the carbon footprint performance class to which the relevant battery model per manufacturing plant corresponds.
For batteries referred to in the first subparagraph, the technical documentation referred to in Annex VIII shall demonstrate that the carbon footprint declared and the related classification into a carbon footprint performance class have been calculated in accordance with the methodology set out in the delegated acts adopted by the Commission pursuant to paragraph 1, fourth subparagraph, point (a) and the fourth subparagraph, point (a), of this paragraph.
The carbon footprint performance class requirements in the first subparagraph shall apply from:
(a)
18 August 2026 or 18 months after the date of entry into force either of the delegated act or of the implementing act respectively referred to in the fourth subparagraph, points (a) and (b), whichever is the latest, for electric vehicle batteries;
(b)
18 August 2027 or 18 months after the date of entry into force either of the delegated act or of the implementing act respectively referred to in the fourth subparagraph, points (a) and (b), whichever is the latest, for rechargeable industrial batteries except those with exclusively external storage;
(c)
18 February 2030 or 18 months after the date of entry into force either of the delegated act or of the implementing act respectively referred to in the fourth subparagraph, points (a) and (b), whichever is the latest, for LMT batteries;
(d)
18 February 2032 or 18 months after the date of entry into force either of the delegated act or of the implementing act respectively referred to in the fourth subparagraph, points (a) and (b), whichever is the latest, for rechargeable industrial batteries with external storage.
The Commission shall, by 18 February 2025 for electric vehicle batteries, 18 August 2026 for rechargeable industrial batteries except those with exclusively external storage, 18 August 2028 for LMT batteries and 18 August 2030 for rechargeable industrial batteries with external storage, adopt:
(a)
a delegated act in accordance with Article 89 to supplement this Regulation by establishing the carbon footprint performance classes referred to in the first subparagraph. In preparing that delegated act, the Commission shall take into account the conditions set out in point 8 of Annex II;
(b)
an implementing act establishing the formats for the labelling referred to in the first subparagraph and the format for the declaration on the carbon footprint performance class referred to in that subparagraph. That implementing act shall be adopted in accordance with the examination procedure referred to in Article 90(3).
The Commission shall, in accordance with the conditions set out in point 8 of Annex II, review the number of performance classes and the thresholds between them, every three years and, where appropriate, adopt delegated acts in accordance with Article 89 to amend the number of performance classes and thresholds between them with a view to keeping them representative of the market reality and expected developments in the market.
3.
For electric vehicle batteries, rechargeable industrial batteries with a capacity greater than 2 kWh and LMT batteries, the technical documentation referred to in Annex VIII shall demonstrate that the declared life cycle carbon footprint value for the relevant battery model per manufacturing plant, is below the maximum threshold established in the delegated act adopted pursuant to the third subparagraph.
The requirement for a maximum life cycle carbon footprint threshold referred to in the first subparagraph shall apply as of:
(a)
18 February 2028 or 18 months after the date of entry into force of the delegated act referred to in the third subparagraph, whichever is the latest, for electric vehicle batteries;
(b)
18 February 2029 or 18 months after the date of entry into force of the delegated act referred to in the third subparagraph, whichever is the latest, for rechargeable industrial batteries except those with exclusively external storage;
(c)
18 August 2031 or 18 months after the date of entry into force of the delegated act referred to in the third subparagraph, whichever is the latest, for LMT batteries;
(d)
18 August 2033 or 18 months after the date of entry into force of the delegated act referred to in the third subparagraph, whichever is the latest, for rechargeable industrial batteries with external storage.
The Commission shall, by 18 August 2026 for electric vehicle batteries, 18 February 2028 for rechargeable industrial batteries, except those with external storage, 18 February 2030 for LMT batteries and 18 February 2032 for industrial batteries with external storage, adopt a delegated act in accordance with Article 89 to supplement this Regulation by determining the maximum life cycle carbon footprint threshold referred to in the first subparagraph. In preparing that delegated act, the Commission shall take into account the relevant conditions set out in point 9 of Annex II.
The introduction of a maximum life cycle carbon footprint threshold shall trigger, if necessary, a reclassification of the carbon footprint performance classes referred to in paragraph 2.
4.
By 31 December 2030, the Commission shall assess the feasibility of extending the requirements in this Article to portable batteries, and the requirement laid down in paragraph 3 to rechargeable industrial batteries with a capacity of 2 kWh or less. To that end, the Commission shall submit a report to the European Parliament and the Council and consider taking the appropriate measures, including the adoption of legislative proposals.
5.
Paragraphs 1, 2 and 3 shall not apply to a battery that has been subject to preparation for re-use, preparation for repurposing, repurposing or remanufacturing, if the battery had already been placed on the market or put into service before undergoing such operations.
Recycled content in industrial batteries, electric vehicle batteries, LMT batteries and SLI batteries
1.
From 18 August 2028 or 24 months after the date of entry into force of the delegated act referred to in the third subparagraph, whichever is the latest, industrial batteries with a capacity greater than 2 kWh, except those with exclusively external storage, electric vehicle batteries and SLI batteries that contain cobalt, lead, lithium or nickel in active materials, shall be accompanied by documentation containing information about the percentage share of cobalt, lithium or nickel that is present in active materials and that has been recovered from battery manufacturing waste or post-consumer waste, and the percentage share of lead that is present in the battery and that has been recovered from waste, for each battery model per year and per manufacturing plant.
The first subparagraph shall apply from 18 August 2033 to LMT batteries that contain cobalt, lead, lithium or nickel in active materials.
By 18 August 2026, the Commission shall adopt a delegated act in accordance with Article 89 to supplement this Regulation by establishing, for the batteries referred to in the first and second subparagraphs, the methodology for the calculation and verification of the percentage share of cobalt, lithium or nickel that is present in active materials and that has been recovered from battery manufacturing waste or post-consumer waste, and the percentage share of lead that is present in the battery and that has been recovered from waste, and the format for the documentation.
2.
From 18 August 2031, for industrial batteries with a capacity greater than 2 kWh, except those with exclusively external storage, electric vehicle batteries and SLI batteries that contain cobalt, lead, lithium or nickel in active materials, the technical documentation referred to in Annex VIII shall demonstrate that those batteries contain, in active materials, the following minimum percentage share of, respectively, cobalt, lithium or nickel that has been recovered from battery manufacturing waste or post-consumer waste, and the minimum percentage share of lead that is present in the battery and that has been recovered from waste, for each battery model per year and per manufacturing plant:
(a)
16 % cobalt;
(b)
85 % lead;
(c)
6 % lithium;
(d)
6 % nickel.
3.
From 18 August 2036, for industrial batteries with a capacity greater than 2 kWh, except those with exclusively external storage, electric vehicle batteries, LMT batteries and SLI batteries that contain cobalt, lead, lithium or nickel in active materials, the technical documentation referred to in Annex VIII shall demonstrate that those batteries contain, in the active materials, the following minimum percentage share of, respectively, cobalt, lithium or nickel that has been recovered from battery manufacturing waste or post-consumer waste, and the minimum percentage share of lead that is present in the battery and that has been recovered from waste, for each battery model per year and per manufacturing plant:
(a)
26 % cobalt;
(b)
85 % lead;
(c)
12 % lithium;
(d)
15 % nickel.
4.
Paragraphs 1, 2 and 3 shall not apply to batteries that have been subject to preparation for re-use, preparation for repurposing, repurposing or remanufacturing, if the batteries had already been placed on the market or put into service before undergoing such operations.
5.
After the date of entry into force of the delegated act adopted under paragraph 1, and no later than 31 December 2028, the Commission shall assess whether, due to the existing availability, and the forecasted availability for 2030 and 2035, of cobalt, lead, lithium or nickel recovered from waste, or lack thereof, and in view of technical and scientific progress, it is appropriate to revise the targets laid down in paragraphs 2 and 3.
Where justified and appropriate on the basis of the assessment made under the first subparagraph or due to other considerable changes in battery technology impacting the type of materials recovered, the Commission shall adopt, by 18 August 2029, a delegated act in accordance with Article 89, to amend the targets laid down in paragraphs 2 and 3.
6.
Where justified and appropriate due to market developments regarding battery chemistries impacting the type of materials that can be recovered, the Commission is empowered to adopt delegated acts in accordance with Article 89, to amend this Regulation by adding materials other than cobalt, lead, lithium and nickel, with specific minimum shares of recycled content per specific material in paragraphs 2 and 3 of this Article.
Performance and durability requirements for portable batteries of general use
1.
From 18 August 2028 or 24 months after the date of entry into force of the delegated act referred to in paragraph 2, whichever is the latest, portable batteries of general use, excluding button cells, shall meet the minimum values for the electrochemical performance and durability parameters set out in Annex III as laid down in the delegated act adopted pursuant to paragraph 2.
2.
By 18 August 2027, the Commission shall adopt a delegated act in accordance with Article 89 to supplement this Regulation by establishing mandatory minimum values for the electrochemical performance and durability parameters set out in Annex III for portable batteries of general use, excluding button cells.
The Commission is empowered to adopt delegated acts in accordance with Article 89 to amend the minimum values referred to in the first subparagraph or add electrochemical performance and durability parameters to those set out in Annex III in view of technical and scientific progress.
In preparing the delegated act referred to in the first subparagraph, the Commission shall consider the need to reduce the life cycle environmental impact of portable batteries of general use, including by means of increasing the resource efficiency thereof, and shall take into consideration relevant international standards and labelling schemes.
The Commission shall also ensure that the provisions laid down by the delegated act referred to in the first subparagraph do not have a significant adverse impact on the safety and functionality of those batteries or the appliances, light means of transport or other vehicles into which those batteries are incorporated, the affordability and the cost for end-users and the industry’s competitiveness.
3.
By 31 December 2030, the Commission shall assess the feasibility of measures to phase out non-rechargeable portable batteries of general use with a view to minimising their environmental impact based on the life cycle assessment methodology and viable alternatives for end-users. To that end, the Commission shall submit a report to the European Parliament and to the Council and consider taking the appropriate measures, including the adoption of legislative proposals for either the phase out or the setting of eco-design requirements.
Performance and durability requirements for rechargeable industrial batteries, LMT batteries and electric vehicle batteries
1.
From 18 August 2024, rechargeable industrial batteries with a capacity greater than 2 kWh, LMT batteries and electric vehicle batteries shall be accompanied by a document containing values for the electrochemical performance and durability parameters set out in Part A of Annex IV.
For batteries referred to in the first subparagraph, the technical documentation referred to in Annex VIII shall contain an explanation of the technical specifications, standards and conditions used to measure, calculate or estimate the values for the electrochemical performance and durability parameters. That explanation shall include, at least, the elements set out in Part B of Annex IV.
2.
From either 18 August 2027 or 18 months after the date of entry into force of the delegated act referred to in the first subparagraph of paragraph 5, whichever is the latest, rechargeable industrial batteries with a capacity greater than 2 kWh, except those with exclusively external storage, shall meet the minimum values laid down in the delegated act adopted pursuant to the first subparagraph of paragraph 5 for the electrochemical performance and durability parameters set out in Part A of Annex IV.
3.
From either 18 August 2028 or 18 months after the date of entry into force of the delegated act referred to in the second subparagraph of paragraph 5, whichever is the latest, LMT batteries shall meet the minimum values laid down in the delegated act adopted pursuant to the second subparagraph of paragraph 5 for the electrochemical performance and durability parameters set out in Part A of Annex IV.
4.
Paragraphs 1, 2 and 3 shall not apply to a battery that has been subject to preparation for re-use, preparation for repurposing, repurposing or remanufacturing, where the economic operator placing that battery on the market or putting it into service demonstrates that the battery, before undergoing such operations, has been placed on the market or put into service before the dates on which those obligations become applicable in accordance with those paragraphs.
5.
By 18 February 2026, the Commission shall adopt a delegated act in accordance with Article 89 to supplement this Regulation by establishing minimum values for the electrochemical performance and durability parameters set out in Part A of Annex IV that rechargeable industrial batteries with a capacity greater than 2 kWh, except those with exclusively external storage, shall attain.
By 18 February 2027, the Commission shall adopt a delegated act in accordance with Article 89 to supplement this Regulation by establishing minimum values for the electrochemical performance and durability parameters set out in Part A of Annex IV that LMT batteries shall attain.
In preparing the delegated acts referred to in the first and second subparagraph, the Commission shall consider the need to reduce the life cycle environmental impact of rechargeable industrial batteries with a capacity greater than 2 kWh, except of those with exclusively external storage, and of LMT batteries, and ensure that the requirements laid down therein do not have a significant adverse impact on the functionality of those batteries or the appliances, light means of transport or other vehicles into which those batteries are incorporated, their affordability and industry’s competitiveness.
6.
The Commission is empowered to adopt delegated acts in accordance with Article 89 to amend the electrochemical performance and durability parameters set out in Annex IV in light of market developments and technical and scientific progress, including, in particular, related to technical specifications of the informal UNECE Working Group on Electric Vehicles and the Environment.
Removability and replaceability of portable batteries and LMT batteries
1.
Any natural or legal person that places on the market products incorporating portable batteries shall ensure that those batteries are readily removable and replaceable by the end-user at any time during the lifetime of the product. That obligation shall only apply to entire batteries and not to individual cells or other parts included in such batteries.
A portable battery shall be considered readily removable by the end-user where it can be removed from a product with the use of commercially available tools, without requiring the use of specialised tools, unless provided free of charge with the product, proprietary tools, thermal energy, or solvents to disassemble the product.
Any natural or legal person that places on the market products incorporating portable batteries shall ensure that those products are accompanied with instructions and safety information on the use, removal and replacement of the batteries. Those instructions and that safety information shall be made available permanently online, on a publicly available website, in an easily understandable way for end-users.
This paragraph shall be without prejudice to any specific provisions ensuring a higher level of protection of the environment and human health relating to the removability and replaceability of portable batteries by end-users laid down in any Union law on electrical and electronic equipment as defined in Article 3(1), point (a), of Directive 2012/19/EU.
2.
By way of derogation from paragraph 1, the following products incorporating portable batteries may be designed in such a way as to make the battery removable and replaceable only by independent professionals:
(a)
appliances specifically designed to operate primarily in an environment that is regularly subject to splashing water, water streams or water immersion, and that are intended to be washable or rinseable;
(b)
professional medical imaging and radiotherapy devices, as defined in Article 2, point (1), of Regulation (EU) 2017/745, and in vitro diagnostic medical devices, as defined in Article 2, point (2), of Regulation (EU) 2017/746.
The derogation set out in point (a) of this paragraph shall only be applicable where such derogation is required to ensure the safety of the user and the appliance.
3.
The obligations laid down in paragraph 1 shall not apply where continuity of power supply is necessary and a permanent connection between the product and the respective portable battery is required to ensure the safety of the user and the appliance or, for products that collect and supply data as their main function, for data integrity reasons.
4.
The Commission is empowered to adopt delegated acts in accordance with Article 89 to amend paragraph 2 of this Article by adding further products to be exempted from the removability and replaceability requirements laid down in paragraph 1 of this Article. Such delegated acts shall be adopted only on account of market developments and technical and scientific progress, and provided that there are scientifically grounded concerns over the safety of end-users removing or replacing the portable battery, or in cases where there is a risk that the removal or the replacement of the battery by end-users would be in violation of any product safety requirements provided for by applicable Union law.
5.
Any natural or legal person that places on the market products incorporating LMT batteries shall ensure that those batteries, as well as individual battery cells included in the battery pack, are readily removable and replaceable by an independent professional at any time during the lifetime of the product.
6.
For the purposes of paragraphs 1 and 5, a portable battery or LMT battery shall be considered readily replaceable where, after its removal from an appliance or light means of transport, it can be substituted by another compatible battery without affecting the functioning, the performance or the safety of that appliance or light means of transport.
7.
Any natural or legal person that places on the market products incorporating portable batteries or LMT batteries shall ensure that those batteries are available as spare parts of the equipment that they power for a minimum of five years after placing the last unit of the equipment model on the market, with a reasonable and non-discriminatory price for independent professionals and end-users.
8.
Software shall not be used to impede the replacement of a portable battery or LMT battery, or of their key components, with another compatible battery or key components.
9.
The Commission shall publish guidelines to facilitate the harmonised application of this Article.
Safety of stationary battery energy storage systems
1.
Stationary battery energy storage systems placed on the market or put into service shall be safe during their normal operation and use.
2.
By 18 August 2024, the technical documentation referred to in Annex VIII shall:
(a)
demonstrate that the stationary battery energy storage systems are compliant with paragraph 1 and include evidence that they have been successfully tested for the safety parameters set out in Annex V, for which state-of-the-art testing methodologies shall be used. The safety parameters shall only apply in so far as a corresponding hazard exists for the stationary battery energy storage system in question when it is used under the conditions envisaged by the manufacturer;
(b)
include an assessment of possible safety hazards of the stationary battery energy storage system that are not addressed in Annex V;
(c)
include evidence that the hazards referred to in point (b) have been successfully mitigated and tested; state-of-the-art testing methodologies shall be used for such testing;
(d)
include mitigation instructions in case the identified hazards could occur, for example a fire or explosion.
The technical documentation shall be reviewed if a battery is prepared for re-use, prepared for repurposing, remanufactured or repurposed.
3.
The Commission is empowered to adopt delegated acts in accordance with Article 89 to amend the safety parameters set out in Annex V in view of technical and scientific progress.