Commission Implementing Decision (EU) 2024/354 of 19 January 2024 on harmonised standards for cableway installations drafted in support of Regulation (EU) 2016/424 of the European Parliament and the Council

Article 1

The references of harmonised standards for cableway installations drafted in support of Regulation (EU) 2016/424, listed in Annex I to this Decision, are hereby published in the Official Journal of the European Union . The references listed in rows 1, 6, 8 and 16 of that Annex are published with restriction.

Article 2

Communication 2018/C 114/04 is repealed.

However, it shall continue to apply with respect to the reference of the harmonised standard listed in Annex II to this Decision until the date of withdrawal of that reference set out in that Annex.

Article 3

Implementing Decision (EU) 2019/1923 is repealed.

Article 4

This Decision shall enter into force on the day of its publication in the Official Journal of the European Union .

ANNEX I

ANNEX I
No
Reference of the standard
1.
EN 1709:2019
Safety requirements for cableway installations designed to transport persons – Precommissioning inspection and instructions for maintenance and operational inspection and checks
Restriction: The normative references referred to in point 2 of harmonised standard EN 1709:2019 shall be read as EN 1907:2017, EN 1908:2015, EN 1909:2017, EN 12397:2017, EN 12408:2004, EN 12927:2019, EN 12929:2015 (all parts), EN 12930:2015, EN 13107:2015, EN 13223:2015, EN 13243:2015, EN 13796:2017 (all parts)
2.
EN 1908:2015
Safety requirements of cableway installations designed to carry persons – Tensioning devices
3.
EN 1909:2017
Safety requirements for cableway installations designed to carry persons – Recovery and evacuation
4.
EN 12385-8:2002
Steel wire ropes – Safety – Part 8: Stranded hauling and carrying-hauling ropes for cableway installations designed to carry persons
5.
EN 12385-9:2002
Steel wire ropes – Safety – Part 9: Locked coil carrying ropes for cableway installations designed to carry persons
6.
EN 12927:2019
Safety requirements for cableway installations designed to carry persons – Ropes
Restriction: The normative references referred to in point 2 of harmonised standard EN 12927:2019 shall be read as EN 1559-2:2014, EN 1709:2019, EN 1907:2017, EN 1908:2015, EN 1909:2017, EN 10228-1:2016, EN 12385-2:2002+A1:2008, EN 12385-4:2002+A1:2008, EN 12385-8:2002, EN 12385-9:2002, EN 12397:2017, EN 12408:2004, EN 12929-1:2015, EN 12929-2:2015, EN 12930:2015, EN 13107:2015, EN 13223:2015, EN 13243:2015, EN 13411-2:2001+A1:2008, EN 13411-3:2004+A1:2008, EN 13411-4:2002+A1:2008, EN 13411-5:2003+A1:2008, EN 13411-6:2004+A1:2008, EN 13411-7:2006+A1:2008, EN 13796-1:2017, EN 13796-2:2017, EN 13796-3:2017, EN ISO 148-1:2016, EN ISO 5579:2013, EN ISO 9554:2019, EN ISO 10547:2009
7.
EN 12929-1:2015+A1:2022
Safety requirements for cableway installations designed to carry persons – General requirements – Part 1: Requirements for all installations
8.
EN 12929-2:2015+A1:2022
Safety requirements for cableway installations designed to carry persons – General requirements – Part 2: Additional requirements for reversible bicable aerial ropeways without carrier truck brakes
Restriction: The normative references referred to in point 2 of harmonised standard EN 12929-2:2015+A1:2022 shall be read as EN 1709:2019, EN 1907:2017, EN 1908:2015, EN 1909:2017, EN 12397:2017, EN 12408:2004, EN 12927:2019, EN 12929-1:2015+A1:2022, EN 12930:2015, EN 13107:2015/AC:2016, EN 13223:2015+A1:2022, EN 13243:2015, EN 13796-1:2017, EN 13796-2:2017+A1:2022, EN 13796-3:2017+A1:2022
9.
EN 12930:2015
Safety requirements for cableway installations designed to carry persons – Calculations
10.
EN 13107:2015
Safety requirements for cableway installations designed to carry persons – Civil engineering works
EN 13107:2015/AC:2016
11.
EN 13223:2015+A1:2022
Safety requirements for cableway installations designed to carry persons – Drive systems and other mechanical equipment
12.
EN 13243:2015
Safety requirements for cableway installations designed to carry persons – Electrical equipment other than for drive systems
13.
EN 13796-1:2017
Safety requirements for cableway installations designed to carry persons – Carriers – Part 1: Grips, carrier trucks, on-board brakes, cabins, chairs, carriages, maintenance carriers, tow-hangers
14.
EN 13796-2:2017+A1:2022
Safety requirements for cableway installations designed to carry persons – Carriers – Part 2: Slipping resistance tests for grips
15.
EN 13796-3:2017+A1:2022
Safety requirements for cableway installations designed to carry persons – Carriers – Part 3: Fatigue tests
16.
EN 17064:2018
Safety requirements for cableway installations designed to carry persons – Prevention and fight against fire
Restriction: The normative references referred to in point 2 of harmonised standard EN 17064:2018 shall be read as EN 1021-1:2014, EN 1021-2:2014, EN 1838:2013, EN 1907:2017, EN 12929-1:2015, EN 13243:2015, EN 13501-1:2007+A1:2009, EN 50172:2004, EN 50272-1:2010, EN 50272-2:2001, EN 60204-1:2006, EN 60695-11-10:2013, EN 61730-1:2007, EN 61730-2:2007, EN ISO 7010:2012, EN ISO 8528-13:2016

ANNEX II

ANNEX II
No
Reference of the standard
Date of withdrawal
1.
EN 13223:2015
Safety requirements for cableway installations designed to carry persons – Drive systems and other mechanical equipment
23 July 2025

Commission Implementing Decision (EU) 2024/354 of 19 January 2024 on harmonised standards for cableway installations drafted in support of Regulation (EU) 2016/424 of the European Parliament and the Council

Schedules & Appendices

Cite this act