Amendment to Regulation (EU) No 168/2013
In Section C1 of the table in Annex II to Regulation (EU) No 168/2013, the following entry is added:
‘15a
18
permanent magnet circularity requirements
Regulation (EU) 2024/1252 of the European Parliament and of the Council ( *1 )
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Amendment to Regulation (EU) 2018/858
In Section G, ‘Environmental Performance and Emissions’, of the table in Part I of Annex II to Regulation (EU) 2018/858, the following entry is added:
‘G 15
Permanent magnet circularity requirements
Regulation (EU) 2024/1252 of the European Parliament and of the Council ( *2 )
X
X
X
X
X
X
X
X
Amendments to Regulation (EU) 2018/1724
Regulation (EU) 2018/1724 is amended as follows:
(1)
in Annex I, the following row is added:
‘AJ.
Critical raw materials projects
1.
the single points of contact established or designated pursuant to Article 9(1) of Regulation (EU) 2024/1252 of the European Parliament and of the Council ( *3 )
2.
information on the permit-granting process
3.
information on financing and investment services
4.
information on funding possibilities at Union or Member State level
5.
information on business support services, including but not limited to corporate tax declaration, local tax laws or labour law
(2)
in Annex II, the following row is added:
‘Critical raw materials projects
Procedure related to all relevant permits to build and operate critical raw materials projects, including building, chemical and grid connection permits and environmental assessments and authorisations where these are required, and encompassing all applications and procedures from the acknowledgment that the application is complete to the notification of the comprehensive decision on the outcome of the procedure by the single point of contact concerned pursuant to Article 9 of Regulation (EU) 2024/1252.
All outputs pertaining to the procedures ranging from the acknowledgment of the completeness of the application to the notification of the comprehensive decision on the outcome of the procedure by the single point of contact concerned pursuant to Article 9 of Regulation (EU) 2024/1252.’;
(3)
in Annex III, the following point is added:
‘(9)
The single point of contact concerned pursuant to Article 9 of Regulation (EU) 2024/1252.’.
Amendments to Regulation (EU) 2019/1020
Regulation (EU) 2019/1020 is amended as follows:
(1)
in Article 4, paragraph 5 is replaced by the following:
‘5. This Article applies only in relation to products that are subject to Regulations (EU) No 305/2011 ( *4 ) , (EU) 2016/425 ( *5 ) , (EU) 2016/426 ( *6 ) and (EU) 2024/1252 ( *7 ) and Directives 2000/14/EC ( *8 ) , 2006/42/EC ( *9 ) , 2009/48/EC ( *10 ) , 2009/125/EC ( *11 ) , 2011/65/EU ( *12 ) , 2013/29/EU ( *13 ) , 2013/53/EU ( *14 ) , 2014/29/EU ( *15 ) , 2014/30/EU ( *16 ) , 2014/31/EU ( *17 ) , 2014/32/EU ( *18 ) , 2014/34/EU ( *19 ) , 2014/35/EU ( *20 ) , 2014/53/EU ( *21 ) and 2014/68/EU ( *22 ) of the European Parliament and of the Council.
( *4 ) Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011 laying down harmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC ( OJ L 88, 4.4.2011, p. 5 )."
( *5 ) Regulation (EU) 2016/425 of the European Parliament and of the Council of 9 March 2016 on personal protective equipment and repealing Council Directive 89/686/EEC ( OJ L 81, 31.3.2016, p. 51 )."
( *6 ) Regulation (EU) 2016/426 of the European Parliament and of the Council of 9 March 2016 on appliances burning gaseous fuels and repealing Directive 2009/142/EC ( OJ L 81, 31.3.2016, p. 99 )."
( *7 ) Regulation (EU) 2024/1252 of the European Parliament and of the Council of 11 April 2024 establishing a framework for ensuring a secure and sustainable supply of critical raw materials and amending Regulations (EU) No 168/2013, (EU) 2018/858, (EU) 2018/1724 and (EU) 2019/1020 ( OJ L, 2024/1252, 3.5.2024, ELI: http://data.europa.eu/eli/reg/2024/1252/oj )."
( *8 ) Directive 2000/14/EC of the European Parliament and of the Council of 8 May 2000 on the approximation of the laws of the Member States relating to the noise emission in the environment by equipment for use outdoors ( OJ L 162, 3.7.2000, p. 1 )."
( *9 ) Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC ( OJ L 157, 9.6.2006, p. 24 )."
( *10 ) Directive 2009/48/EC of the European Parliament and of the Council of 18 June 2009 on the safety of toys ( OJ L 170, 30.6.2009, p. 1 )."
( *11 ) Directive 2009/125/EC of the European Parliament and of the Council of 21 October 2009 establishing a framework for the setting of ecodesign requirements for energy-related products ( OJ L 285, 31.10.2009, p. 10 )."
( *12 ) Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment ( OJ L 174, 1.7.2011, p. 88 )."
( *13 ) Directive 2013/29/EU of the European Parliament and of the Council of 12 June 2013 on the harmonisation of the laws of the Member States relating to the making available on the market of pyrotechnic articles ( OJ L 178, 28.6.2013, p. 27 )."
( *14 ) Directive 2013/53/EU of the European Parliament and of the Council of 20 November 2013 on recreational craft and personal watercraft and repealing Directive 94/25/EC ( OJ L 354, 28.12.2013, p. 90 )."
( *15 ) Directive 2014/29/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of simple pressure vessels ( OJ L 96, 29.3.2014, p. 45 )."
( *16 ) Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility ( OJ L 96, 29.3.2014, p. 79 )."
( *17 ) Directive 2014/31/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of non-automatic weighing instruments ( OJ L 96, 29.3.2014, p. 107 )."
( *18 ) Directive 2014/32/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of measuring instruments ( OJ L 96, 29.3.2014, p. 149 )."
( *19 ) Directive 2014/34/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to equipment and protective systems intended for use in potentially explosive atmospheres ( OJ L 96, 29.3.2014, p. 309 )."
( *20 ) Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits ( OJ L 96, 29.3.2014, p. 357 )."
( *21 ) Directive 2014/53/EU of the European Parliament and of the Council of 16 April 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC ( OJ L 153, 22.5.2014, p. 62 )."
( *22 ) Directive 2014/68/EU of the European Parliament and of the Council of 15 May 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of pressure equipment ( OJ L 189, 27.6.2014, p. 164 ).’;"
(2)
in Annex I, the following point is added:
‘71.
Regulation (EU) 2024/1252 of the European Parliament and of the Council of 11 April 2024 establishing a framework for ensuring a secure and sustainable supply of critical raw materials and amending Regulations (EU) No 168/2013, (EU) 2018/858, (EU) 2018/1724 and (EU) 2019/1020 ( OJ L, 2024/1252, 3.5.2024, ELI: http://data.europa.eu/eli/reg/2024/1252/oj ), in so far as it concerns the requirements set out in Article 28, 29 or 31 of that Regulation.’.