Article 1
The technical specifications and testing standards set out in the Annex shall apply to non-percolating lay flat firefighting hoses with an inside diameter greater than 25 mm.
Commission Delegated Regulation (EU) 2024/1295 of 26 February 2024 on harmonised technical specifications and testing standards for fire hoses
Data as of 2026-07-04 · Compiled from an official source version. Later amendments or repeals may not be reflected; the official text prevails. · Read the official text ↗
The technical specifications and testing standards set out in the Annex shall apply to non-percolating lay flat firefighting hoses with an inside diameter greater than 25 mm.
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union .
ANNEX Technical specifications and testing standards for non-percolating lay flat firefighting hoses with an inside diameter greater than 25 mm Ref. Item Testing standard 1. Fire-fighting hoses with an inside diameter greater than 25 mm — NF S 61-112 (June 2019) NB: As per SOLAS, Chapter II-2, Part B, Regulation 10.2.3.2.1, the diameters of firefighting hoses are required to be to the satisfaction of the administration. 2. Fire-fighting hoses with an inside diameter greater than 25 mm — DIN 14811 (January 2008) excluding the requirements of section 5.3. NB: As per SOLAS, Chapter II-2, Part B, Regulation 10.2.3.2.1, the diameters of firefighting hoses are required to be to the satisfaction of the administration.
Source: EUR-Lex (Publications Office of the EU), © European Union, reuse permitted under Commission Decision 2011/833/EU.