Commission Implementing Regulation (EU) 2024/2409 of 13 September 2024 granting a Union authorisation for the single biocidal product Hydroflex IPA 70 Biocide in accordance with Regulation (EU) No 528/2012 of the European Parliament and of the Council

Article 1

A Union authorisation with authorisation number EU-0032170-0000 is granted to Hydroflex Group GmbH for the making available on the market and use of the same single biocidal product ‘Hydroflex IPA 70 Biocide’ in accordance with the summary of the biocidal product characteristics set out in the Annex. The Union authorisation is valid from 6 October 2024 until 30 November 2032.

Article 2

This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union .

Summary of product characteristics for a biocidal product

ANNEXSupplementary provisions

ANNEX Summary of product characteristics for a biocidal product Hydroflex IPA 70 Biocide Product type(s) PT02: Disinfectants and algaecides not intended for direct application to humans or animals PT04: Food and feed area Authorisation number: EU-0032170-0000 R4BP asset number: EU-0032170-0000 1.    ADMINISTRATIVE INFORMATION 1.1.    Trade name(s) of the product Trade name(s) Hydroflex IPA 70 Biocide 1.2.    Authorisation holder Name and address of the authorisation holder Name Hydroflex Group GmbH Address Kiesacker 19 35418 Buseck DE Authorisation number   EU-0032170-0000 R4BP asset number   EU-0032170-0000 Date of the authorisation   6 October 2024 Expiry date of the authorisation   30 November 2032 1.3.    Manufacturer(s) of the product 1.4.    Manufacturer(s) of the active substance(s) Active substance Propan-2-ol Name of manufacturer ExxonMobil Address of manufacturer 4999 Scenic Highway LA 70897 Baton Rouge, Louisiana United States (the) Location of manufacturing sites 4999 Scenic Highway LA 70897 Baton Rouge, Louisiana United States (the) Active substance Propan-2-ol Name of manufacturer Shell Nederland Raffinaderij B.V. Address of manufacturer Vondelingenweg 601, Vodelingenenplaat 3196 KK Rotterdam Netherlands (the) Location of manufacturing sites Vondelingenweg 601, Vodelingenenplaat 3196 KK Rotterdam Netherlands (the) Active substance Propan-2-ol Name of manufacturer INEOS Solvents Germany GmbH Address of manufacturer Römerstrasse 733 47443 Moers Germany Location of manufacturing sites Römerstrasse 733 47443 Moers Germany Shamrockstraße 88 44623 Herne Germany 2.    PRODUCT COMPOSITION AND FORMULATION 2.1.    Qualitative and quantitative information on the composition of the product Common name IUPAC name Function CAS number EC number Content (%) Propan-2-ol   active substance 67-63-0 200-661-7 70 % (w/w) 2.2.    Type(s) of formulation Meta SPC 2: Ready-to-Use trigger spray 3.    HAZARD AND PRECAUTIONARY STATEMENTS Hazard statements H225: Highly flammable liquid and vapour. H319: Causes serious eye irritation. H336: May cause drowsiness or dizziness. EUH066: Repeated exposure may cause skin dryness or cracking. Precautionary statements P101: If medical advice is needed, have product container or label at hand. P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P233: Keep container tightly closed. P261: Avoid breathing vapours. P261: Avoid breathing spray. P271: Use only outdoors or in a well-ventilated area. P280: Wear eye protection. P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P312: Call a POISON CENTER/doctor if you feel unwell. P337+P313: If eye irritation persists: Get medical advice. P337+P313: If eye irritation persists: Get medical attention. P403+P235: Store in a well-ventilated place. Keep cool. P405: Store locked up. P501: Dispose of contents to in accordance with local regulations. P501: Dispose of container to in accordance with local regulations. 4.    AUTHORISED USE(S) 4.1.    Use description Table 1 Use 1 – Liquid Spray – Small surface disinfection – Professional user Product type PT02: Disinfectants and algaecides not intended for direct application to humans or animals Where relevant, an exact description of the authorised use Not relevant. Target organism(s) (including development stage) Scientific name: Bacteria (incl. Mycobacteria), Common name: - Development stage: - Scientific name: Yeast Common name: - Development stage: - Field(s) of use indoor use Disinfection of small non-porous surfaces, materials, equipment and furniture in private, public, healthcare, industrial areas and in areas for professional activities. Application method(s) Method: spraying Detailed description: - Application rate(s) and frequency Application rate: For surface disinfection a ready-to-use spray solution (20 ml/m 2 ) is applied on surfaces at room temperature. Dilution (%): - Number and timing of application: Application according to requirements, one application per use, 4 times per day. Small surface disinfection(other than healthcare): Bactericidal and yeasticidal: contact time at least 1 min In healthcare area: Bactericidal and yeasticidal: contact time at least 5 min Category(ies) of users professional Pack sizes and packaging material — Bottle HD-PE: 0,1L–2,5L; (Screw caps (HD-PE) or caps (PP) or pump caps (PP) or trigger spray caps (PP) or safety caps (PP)) — Can HD-PE: 5L-60L; (Screw caps (PE/LDPE/HD-PE) or safety caps (HD-PE) — Drum HD-PE: 200L; (Plastic plug with venting system (HD-PE) or Plastic plug for tap (HD-PE) or plastic tap (HD-PE) or seal caps (HD-PE)) — IBC container HD-PE: 1 000 L; (Screw caps (HD-PE) 4.1.1.    Use-specific instructions 1) Apply the ready-to-use product to the surface by spraying. Make sure to wet surfaces completely and wait for 1 minute (general surface disinfection) or 5 minutes (surfaces in healthcare area) 2) For use at room temperature. 3) Application according to requirements, one application per use, 4 times per day. 4.1.2.    Use-specific risk mitigation measures The following personal risk mitigation measure can be considered for refilling procedure unless it can be replaced by technical and/or organisational measures: The use of eye protection during refilling of the product is recommended. 4.1.3.    Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use. 4.1.4.    Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use. 4.1.5.    Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use. 4.2.    Use description Table 2 Use 2 – Liquid Spray - Disinfection for small food contact surfaces – Professional user Product type PT04: Food and feed area Where relevant, an exact description of the authorised use Not relevant Target organism(s) (including development stage) Scientific name: Bacteria Common name: - Development stage: - Scientific name: Yeast Common name: - Development stage: - Field(s) of use indoor use Disinfection of small non-porous surfaces in food sector or food processing industries (including breweries, dairy industry and meat industry). Application method(s) Method: spraying Detailed description: - Application rate(s) and frequency Application rate: For surface disinfection a ready-to-use spray solution (20 ml/m 2 ) is applied on surfaces at room temperature. Dilution (%): - Number and timing of application: Application according to requirements, one application per use, 4 times per day. Small surface disinfection: Bactericidal and yeasticidal: contact time at least 1 min In Breweries/meat industry: Bactericidal and yeasticidal: contact time at least 5 min In dairy industry: Bactericidal and yeasticidal: contact time at least 15 min Category(ies) of users professional Pack sizes and packaging material — Bottle HD-PE: 0,1L–2,5L; (Screw caps (HD-PE) or caps (PP) or pump caps (PP) or trigger spray caps (PP) or safety caps (PP)) — Can HD-PE: 5L-60L; (Screw caps (PE/LDPE/HD-PE) or safety caps (HD-PE) — Drum HD-PE: 200L; (Plastic plug with venting system (HD-PE) or Plastic plug for tap (HD-PE) or plastic tap (HD-PE) or seal caps (HD-PE)) — IBC container HD-PE: 1 000 L;(Screw caps (HD-PE) 4.2.1.    Use-specific instructions 1) Apply the ready-to-use product to the surface by spraying. Make sure to wet surfaces completely and wait for at least 1 min (general surface disinfection), 5 min (surface disinfection in breweries or meat industry) or at least 15 min (surface disinfection in dairy industry). 2) For use at room temperature. 3) Application according to requirements, one application per use, 4 times per day. 4.2.2.    Use-specific risk mitigation measures The following personal risk mitigation measure can be considered for disinfection of food processing machinery and refilling procedure unless it can be replaced by technical and / or organisational measures: The use of eye protection during handling of the product is recommended. 4.2.3.    Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use. 4.2.4.    Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use. 4.2.5.    Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use. 5.    GENERAL DIRECTIONS FOR USE   ( 1 ) 5.1.    Instructions for use 1) Products must be shaken before use. 2) Do not apply more than 20 mL/m2. 3) Used wipes must be disposed in a closed container. 5.2.    Risk mitigation measures 1) Avoid contact with eyes. 2) For refilling a funnel must be applied. 3) The product must only be applied for disinfection of small surfaces. 4) Keep out of reach of children and pets. 5) Use only in well-ventilated areas. 6) Keep children and pets away from rooms where disinfection is taking place. 7) Provide adequate ventilation before children and pets enter treated rooms. 5.3.    Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment 1) IF IN EYES: Rinse with water. Remove contact lenses, if present and easy to do. Continue rinsing for 5 minutes. Call a POISON CENTRE or a doctor. 2) IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing. Call a POISON CENTRE or a doctor. 5.4.    Instructions for safe disposal of the product and its packaging 1) Product: Disposal together with normal waste is not allowed. Special disposal required according to local regulations. 2) Do not let product enter drains. 3) Contact waste disposal services. 4) Contaminated packaging: Empty contaminated packaging thoroughly. They can be recycled after thorough and proper cleaning. Packaging that cannot be cleaned are to be disposed of in the same manner as the product. 5) Do not burn, or use a cutting torch on, the empty drum. Risk of explosion. 5.5.    Conditions of storage and shelf-life of the product under normal conditions of storage 1) Store in a well-ventilated place. 2) Keep cool. 3) Keep container tightly closed. 4) Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. 5) Shelf-life: 24 months 6.    OTHER INFORMATION The product contains propan-2-ol (CAS No.: 67-63-0), for which a European reference value of 129,28 mg/m 3 for the professional user was agreed and used for the risk assessment of the product. ( 1 )   Instructions for use, risk mitigation measures and other directions for use under this section are valid for any authorised uses.