My bookmarksSign up free
Source

Commission Implementing Regulation (EU) 2024/3201 of 18 December 2024 amending Implementing Regulation (EU) 2024/1268 extending the definitive countervailing duties imposed by Implementing Regulation (EU) 2022/433 on imports of stainless steel cold-rolled flat products originating in Indonesia to imports of stainless steel cold-rolled flat products consigned from Taiwan, Türkiye and Vietnam, whether declared as originating in Taiwan, Türkiye and Vietnam or not

Commission Implementing Regulation (EU) 2024/3201 of 18 December 2024 amending Implementing Regulation (EU) 2024/1268 extending the definitive countervailing duties imposed by Implementing Regulation (EU) 2022/433 on imports of stainless steel cold-rolled flat products originating in Indonesia to imports of stainless steel cold-rolled flat products consigned from Taiwan, Türkiye and Vietnam, whether declared as originating in Taiwan, Türkiye and Vietnam or not

Implementing Regulation (EU) 2024/3201 · Regulation · 3 articles

Data as of 2026-07-04 · Compiled from an official source version. Later amendments or repeals may not be reflected; the official text prevails. · Read the official text ↗

Article 1

Open ↗

Implementing Regulation (EU) 2024/1268 is amended as follows: (1) Recitals (173), (174) and (175) are replaced by the following: ‘(173) However, the Commission did not find evidence that parts of the imported like product were benefitting from subsidies found in the original investigation. (174) The Commission concluded from the prices of Indonesian SSHR paid by Lam Khang that parts of the imported like product were not benefitting from subsidies found in the original investigation. (175) In view of the above, the Commission concluded that the request for exemption of Lam Khang should be accepted.’; (2) in Article 1, paragraph 1 is replaced by the following: ‘1.   The definitive countervailing duty imposed by Implementing Regulation (EU) 2022/433 on imports of flat-rolled products of stainless steel, not further worked than cold-rolled (cold-reduced) originating in Indonesia is hereby extended to imports of flat-rolled products of stainless steel, not further worked than cold-rolled (cold-reduced), currently falling under CN codes 7219 31 00 , 7219 32 10 , 7219 32 90 , 7219 33 10 , 7219 33 90 , 7219 34 10 , 7219 34 90 , 7219 35 10 , 7219 35 90 , 7219 90 20 , 7219 90 80 , 7220 20 21 , 7220 20 29 , 7220 20 41 , 7220 20 49 , 7220 20 81 , 7220 20 89 , 7220 90 20 and 7220 90 80 , consigned from Taiwan, Türkiye and Vietnam whether declared as originating in Taiwan, Türkiye and Vietnam or not (TARIC codes 7219 31 00 10, 7219 31 00 20, 7219 32 10 10, 7219 32 10 20, 7219 32 90 10, 7219 32 90 20, 7219 33 10 10, 7219 33 10 20, 7219 33 90 10, 7219 33 90 20, 7219 34 10 10, 7219 34 10 20, 7219 34 90 10, 7219 34 90 20, 7219 35 10 10, 7219 35 10 20, 7219 35 90 10, 7219 35 90 20, 7219 90 20 10, 7219 90 20 20, 7219 90 80 10, 7219 90 80 20, 7220 20 21 10, 7220 20 21 20, 7220 20 29 10, 7220 20 29 20, 7220 20 41 10, 7220 20 41 20, 7220 20 49 10, 7220 20 49 20, 7220 20 81 10, 7220 20 81 20, 7220 20 89 10, 7220 20 89 20, 7220 90 20 10, 7220 90 20 20, 7220 90 80 10 and 7220 90 80 20), with the exemption of those produced by the companies listed below: Country Company TARIC additional code Taiwan Chia Far Industrial Factory Co., Ltd. C030 Taiwan Tang Eng Iron Works Co., Ltd. Tung Mung Development Co., Ltd. Walsin Lihwa Corporation Yieh United Steel Corporation Yuan Long Stainless Steel Corp. 89AH Türkiye Posco Assan TST Celik Sanayi A.Ş. 89AK Vietnam Posco VST Co., Ltd. Lam Khang Joint Stock Company 89AJ’ (3) Article 4 is replaced by the following: ‘Article 4 The exemption requests submitted by Trinox Metal Sanayi ve Ticaret A.Ş. (Türkiye) and Yongjin Metal Technology (Vietnam) Company Limited (Vietnam) are rejected.’.

Article 2

Open ↗

Any definitive countervailing duty collected pursuant to Article 1(1) of Implementing Regulation (EU) 2024/1268 as regards goods manufactured by Lam Khang Joint Stock Company shall be repaid or remitted. The repayment or remission shall be requested from national customs authorities in accordance with the applicable customs legislation.

Article 3

Open ↗

This Regulation shall enter into force on the day following that of its publication in the Official Journal of the European Union . It shall apply as of 8 May 2024.

Other acts of the same type
Commission Implementing Regulation (EU) 2016/2223 of 5 December 2016 concerning the classification of certain goods in the Combined NomenclatureCommission Implementing Regulation (EU) 2016/2224 of 5 December 2016 concerning the classification of certain goods in the Combined NomenclatureCommission Implementing Regulation (EU) 2016/2225 of 5 December 2016 concerning the classification of certain goods in the Combined NomenclatureCommission Delegated Regulation (EU) 2017/217 of 5 December 2016 amending Annex II to Regulation (EU) No 978/2012 of the European Parliament and of the Council applying a scheme of generalised tariff preferencesCommission Regulation (EU) 2016/2105 of 1 December 2016 amending Annex I to Regulation (EC) No 794/2004 as regards the form to be used for the notification of State aid to the fishery and aquaculture sectorCouncil Regulation (EU) 2016/2145 of 1 December 2016 amending Regulation (EU) No 1370/2013 determining measures on fixing certain aids and refunds related to the common organisation of the markets in agricultural productsCommission Implementing Regulation (EU) 2016/2252 of 1 December 2016 entering a name in the register of protected designations of origin and protected geographical indications (Oliva di Gaeta (PDO))Commission Regulation (EU) 2016/2096 of 30 November 2016 amending Regulation (EU) No 1254/2009 as regards certain criteria to allow Member States to derogate from the common basic standards on civil aviation security and to adopt alternative security measures (Text with EEA relevance )Commission Regulation (EU) 2016/2281 of 30 November 2016 implementing Directive 2009/125/EC of the European Parliament and of the Council establishing a framework for the setting of ecodesign requirements for energy-related products, with regard to ecodesign requirements for air heating products, cooling products, high temperature process chillers and fan coil units (Text with EEA relevance )Commission Regulation (EU) 2016/2282 of 30 November 2016 amending Regulations (EC) No 1275/2008, (EC) No 107/2009, (EC) No 278/2009, (EC) No 640/2009, (EC) No 641/2009, (EC) No 642/2009, (EC) No 643/2009, (EU) No 1015/2010, (EU) No 1016/2010, (EU) No 327/2011, (EU) No 206/2012, (EU) No 547/2012, (EU) No 932/2012, (EU) No 617/2013, (EU) No 666/2013, (EU) No 813/2013, (EU) No 814/2013, (EU) No 66/2014, (EU) No 548/2014, (EU) No 1253/2014, (EU) 2015/1095, (EU) 2015/1185, (EU) 2015/1188, (EU) 2015/1189 and (EU) 2016/2281 with regard to the use of tolerances in verification procedures (Text with EEA relevance )Commission Delegated Regulation (EU) 2017/254 of 30 November 2016 amending Delegated Regulations (EU) No 1059/2010, (EU) No 1060/2010, (EU) No 1061/2010, (EU) No 1062/2010, (EU) No 626/2011, (EU) No 392/2012, (EU) No 874/2012, (EU) No 665/2013, (EU) No 811/2013, (EU) No 812/2013, (EU) No 65/2014, (EU) No 1254/2014, (EU) 2015/1094, (EU) 2015/1186 and (EU) 2015/1187 with regard to the use of tolerances in verification procedures (Text with EEA relevance. )Commission Implementing Regulation (EU) 2016/2074 of 25 November 2016 amending Regulation (EU) No 37/2010 as regards the substance aluminium salicylate, basic (Text with EEA relevance )

Source: EUR-Lex (Publications Office of the EU), © European Union, reuse permitted under Commission Decision 2011/833/EU.

Contents

What to look at next