Commission Implementing Decision (EU) 2025/165 of 30 January 2025 on the harmonised standards for pressure equipment drafted in support of Directive 2014/68/EU of the European Parliament and of the Council

ANNEX ISupplementary provisions

ANNEX I No Reference of the standard 1. EN 3-8:2021 Portable fire extinguishers – Part 8: Requirements for the construction, pressure resistance and mechanical tests for extinguishers with a maximum allowable pressure equal to or lower than 30 bar, which comply with the requirements of EN 3-7 2. EN 19:2023 Industrial valves – Marking of metallic valves 3. EN 267:2009+A1:2011 Automatic forced draught burners for liquid fuels 4. EN 334:2005+A1:2009 Gas pressure regulators for inlet pressures up to 100 bar 5. EN 378-2:2016 Refrigerating systems and heat pumps – Safety and environmental requirements – Part 2: Design, construction, testing, marking and documentation 6. EN 593:2017 Industrial valves – Metallic butterfly valves for general purposes 7. EN 676:2003+A2:2008 Automatic forced draught burners for gaseous fuels EN 676:2003+A2:2008/AC:2008 8. EN 764-4:2014 Pressure equipment – Part 4: Establishment of technical delivery conditions for metallic materials 9. EN 764-5:2014 Pressure equipment – Part 5: Inspection documentation of metallic materials and compliance with the material specification 10. EN 764-7:2002 Pressure equipment – Part 7: Safety systems for unfired pressure equipment EN 764-7:2002/AC:2006 11. EN 1057:2006+A1:2010 Copper and copper alloys – Seamless, round copper tubes for water and gas in sanitary and heating applications 12. EN 1092-1:2018 Flanges and their joints – Circular flanges for pipes, valves, fittings and accessories, PN designated – Part 1: Steel flanges 13. EN 1092-3:2003 Flanges and their joints – Circular flanges for pipes, valves, fittings and accessories, PN designated – Part 3: Copper alloy flanges EN 1092-3:2003/AC:2007 14. EN 1092-4:2002 Flanges and their joints – Circular flanges for pipes, valves, fittings and accessories, PN designated – Part 4: Aluminium alloy flanges 15. EN 1171:2015 Industrial valves – Cast iron gate valves 16. EN 1349:2009 Industrial process control valves 17. EN 1515-4:2021 Flanges and their joints – Bolting – Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 2014/68/EU 18. EN 1562:2019 Founding – Malleable cast irons 19. EN 1563:2018 Founding – Spheroidal graphite cast irons 20. EN 1564:2011 Founding – Ausferritic spheroidal graphite cast irons 21. EN 1591-1:2013 Flanges and their joints – Design rules for gasketed circular flange connections – Part 1: Calculation 22. EN 1626:2008 Cryogenic vessels – Valves for cryogenic service 23. EN 1653:1997 Copper and copper alloys – Plate, sheet and circles for boilers, pressure vessels and hot water storage units EN 1653:1997/A1:2000 24. EN 1759-3:2003 Flanges and their joints – Circular flanges for pipes, valves, fittings and accessories, Class designated – Part 3: Copper alloy flanges EN 1759-3:2003/AC:2004 25. EN 1759-4:2003 Flanges and their joint – Circular flanges for pipes, valves, fittings and accessories, class designated – Part 4: Aluminium alloy flanges 26. EN 1797:2001 Cryogenic vessels – Gas/material compatibility 27. EN 1866-2:2014 Mobile fire extinguishers – Part 2: Requirements for the construction, pressure resistance and mechanical tests for extinguishers, with a maximum allowable pressure equal to or lower than 30 bar, which comply with the requirements of EN 1866-1 28. EN 1866-3:2013 Mobile fire extinguishers – Part 3: Requirements for the assembly, construction and pressure resistance of CO 2 extinguishers which comply with the requirements of EN 1866-1 29. EN 1983:2013 Industrial valves – Steel ball valves 30. EN 1984:2010 Industrial valves – Steel gate valves 31. EN ISO 4126-1:2013 Safety devices for protection against excessive pressure – Part 1: Safety valves (ISO 4126-1:2013) EN ISO 4126-1:2013/A2:2019 32. EN ISO 4126-2:2019 Safety devices for protection against excessive pressure – Part 2: Bursting disc safety devices (ISO 4126-2:2018) 33. EN ISO 4126-3:2020 Safety devices for protection against excessive pressure – Part 3: Safety valves and bursting disc safety devices in combination (ISO 4126-3:2020) 34. EN ISO 4126-4:2013 Safety devices for protection against excessive pressure – Part 4: Pilot-operated safety valves (ISO 4126-4:2013) 35. EN ISO 4126-5:2013 Safety devices for protection against excessive pressure – Part 5: Controlled safety pressure relief systems (CSPRS) (ISO 4126-5:2013) 36. EN ISO 4126-7:2013 Safety devices for protection against excessive pressure – Part 7: Common data (ISO 4126-7:2013) 37. EN ISO 9606-1:2017 Qualification testing of welders – Fusion welding – Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013) 38. EN ISO 9606-2:2004 Qualification test of welders – Fusion welding – Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004) 39. EN ISO 9606-3:1999 Approval testing of welders – Fusion welding – Part 3: Copper and copper alloys (ISO 9606-3:1999) 40. EN ISO 9606-4:1999 Approval testing of welders – Fusion welding – Part 4: Nickel and nickel alloys (ISO 9606-4:1999) 41. EN ISO 9606-5:2000 Approval testing of welders – Fusion welding – Part 5: Titanium and titanium alloys, zirconium and zirconium alloys (ISO 9606-5:2000) 42. EN ISO 9712:2022 Non-destructive testing – Qualification and certification of NDT personnel (ISO 9712:2021) 43. EN 10028-1:2017 Flat products made of steels for pressure purposes – Part 1: General requirements 44. EN 10028-2:2017 Flat products made of steels for pressure purposes – Part 2: Non-alloy and alloy steels with specified elevated temperature properties 45. EN 10028-3:2017 Flat products made of steels for pressure purposes – Part 3: Weldable fine grain steels, normalized 46. EN 10028-4:2017 Flat products made of steels for pressure purposes – Part 4: Nickel alloy steels with specified low temperature properties 47. EN 10028-5:2017 Flat products made of steels for pressure purposes – Part 5: Weldable fine grain steels, thermomechanically rolled 48. EN 10028-6:2017 Flat products made of steels for pressure purposes – Part 6: Weldable fine grain steels, quenched and tempered 49. EN 10028-7:2016 Flat products made of steels for pressure purposes – Part 7: Stainless steels 50. EN 10204:2004 Metallic products – Types of inspection documents 51. EN 10213:2007+A1:2016 Steel castings for pressure purposes 52. EN 10216-1:2013 Seamless steel tubes for pressure purposes – Technical delivery conditions – Part 1: Non-alloy steel tubes with specified room temperature properties 53. EN 10216-2:2013 Seamless steel tubes for pressure purposes – Technical delivery conditions – Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties 54. EN 10216-3:2013 Seamless steel tubes for pressure purposes – Technical delivery conditions – Part 3: Alloy fine grain steel tubes 55. EN 10216-4:2013 Seamless steel tubes for pressure purposes – Technical delivery conditions – Part 4: Non-alloy and alloy steel tubes with specified low temperature properties 56. EN 10216-5:2021 Seamless steel tubes for pressure purposes – Technical delivery conditions – Part 5: Stainless steel tubes 57. EN 10217-1:2019 Welded steel tubes for pressure purposes – Technical delivery conditions – Part 1: Electric welded and submerged arc welded non-alloy steel tubes with specified room temperature properties 58. EN 10217-2:2019 Welded steel tubes for pressure purposes – Technical delivery conditions – Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties 59. EN 10217-3:2019 Welded steel tubes for pressure purposes – Technical delivery conditions – Part 3: Electric welded and submerged arc welded alloy fine grain steel tubes with specified room, elevated and low temperature properties 60. EN 10217-4:2019 Welded steel tubes for pressure purposes – Technical delivery conditions – Part 4: Electric welded non-alloy steel tubes with specified low temperature properties 61. EN 10217-5:2019 Welded steel tubes for pressure purposes – Technical delivery conditions – Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties 62. EN 10217-6:2019 Welded steel tubes for pressure purposes – Technical delivery conditions – Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties 63. EN 10217-7:2021 Welded steel tubes for pressure purposes – Technical delivery conditions – Part 7: Stainless steel tubes 64. EN 10222-1:2017 Steel forgings for pressure purposes – Part 1: General requirements for open die forgings 65. EN 10222-2:2017+A1:2021 Steel forgings for pressure purposes – Part 2: Ferritic and martensitic steels with specified elevated temperatures properties 66. EN 10222-3:2017 Steel forgings for pressure purposes – Part 3: Nickel steels with specified low temperature properties 67. EN 10222-4:2017+A1:2021 Steel forgings for pressure purposes – Part 4: Weldable fine grain steels with high proof strength 68. EN 10222-5:2017 Steel forgings for pressure purposes – Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels 69. EN 10253-2:2021 Butt-welding pipe fittings – Part 2: Non alloy and ferritic alloy steels with specific inspection requirements 70. EN 10253-4:2008 Butt-welding pipe fittings – Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements EN 10253-4:2008/AC:2009 71. EN 10269:2013 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties 72. EN 10272:2016 Stainless steel bars for pressure purposes 73. EN 10273:2016 Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties 74. EN 10305-4:2016 Steel tubes for precision applications – Technical delivery conditions – Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems 75. EN 10305-6:2016 Steel tubes for precision applications – Technical delivery conditions – Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems 76. EN ISO 10931:2005 Plastics piping systems for industrial applications – Poly(vinylidene fluoride) (PVDF) – Specifications for components and the system (ISO 10931:2005) EN ISO 10931:2005/A1:2015 77. EN 12178:2016 Refrigerating systems and heat pumps – Liquid level indicating devices – Requirements, testing and marking 78. EN 12263:1998 Refrigerating systems and heat pumps – Safety switching devices for limiting the pressure – Requirements and tests 79. EN 12261:2024 Gas meters – Turbine gas meters 80. EN 12266-1:2012 Industrial valves – Testing of metallic valves – Part 1: Pressure tests, test procedures and acceptance criteria – Mandatory requirements 81. EN 12288:2010 Industrial valves – Copper alloy gate valves 82. EN 12392:2016 Aluminium and aluminium alloys – Wrought products and cast products – Special requirements for products intended for the production of pressure equipment 83. EN 12420:2014 Copper and copper alloys – Forgings 84. EN 12434:2000 Cryogenic vessels – Cryogenic flexible hoses EN 12434:2000/AC:2001 85. EN 12451:2012 Copper and copper alloys – Seamless, round tubes for heat exchangers 86. EN 12452:2012 Copper and copper alloys – Rolled, finned, seamless tubes for heat exchangers 87. EN 12516-1:2014+A1:2018 Industrial valves – Shell design strength – Part 1: Tabulation method for steel valve shells 88. EN 12516-2:2014+A1:2021 Industrial valves – Shell design strength – Part 2: Calculation method for steel valve shells 89. EN 12516-3:2002 Valves – Shell design strength – Part 3: Experimental method EN 12516-3:2002/AC:2003 90. EN 12516-4:2014+A1:2018 Industrial valves – Shell design strength – Part 4: Calculation method for valve shells manufactured in metallic materials other than steel 91. EN 12542:2020 LPG equipment and accessories – Static welded steel cylindrical pressure vessels, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m 3 – Design and manufacture 92. EN 12735-1:2020 Copper and copper alloys – Seamless, round tubes for air conditioning and refrigeration – Part 1: Tubes for piping systems 93. EN 12735-2:2016 Copper and copper alloys – Seamless, round tubes for air conditioning and refrigeration – Part 2: Tubes for equipment 94. EN 12778:2002 Cookware – Pressure cookers for domestic use EN 12778:2002/A1:2005 EN 12778:2002/AC:2003 95. EN 12952-1:2015 Water-tube boilers and auxiliary installations – Part 1: General 96. EN 12952-2:2021 Water-tube boilers and auxiliary installations – Part 2: Materials for pressure parts of boilers and accessories 97. EN 12952-3:2022 Water-tube boilers and auxiliary installations – Part 3: Design and calculation for pressure parts of the boiler 98. EN 12952-5:2021 Water-tube boilers and auxiliary installations – Part 5: Workmanship and construction of pressure parts of the boiler 99. EN 12952-6:2021 Water-tube boilers and auxiliary installations – Part 6: Inspection during construction, documentation and marking of pressure parts of the boiler 100. EN 12952-7:2012 Water-tube boilers and auxiliary installations – Part 7: Requirements for equipment for the boiler 101. EN 12952-8:2022 Water-tube boilers and auxiliary installations – Part 8: Requirements for firing systems for liquid and gaseous fuels for the boiler 102. EN 12952-9:2022 Water-tube boilers and auxiliary installations – Part 9: Requirements for firing systems for pulverized solid fuels for the boiler 103. EN 12952-10:2021 Water-tube boilers and auxiliary installations – Part 10: Requirements for safety devices against excessive pressure 104. EN 12952-11:2007 Water-tube boilers and auxiliary installations – Part 11: Requirements for limiting devices of the boiler and accessories 105. EN 12952-14:2004 Water-tube boilers and auxiliary installations – Part 14: Requirements for flue gas DENOX-systems using liquefied pressurized ammonia and ammonia water solution 106. EN 12952-16:2022 Water-tube boilers and auxiliary installations – Part 16: Requirements for grate and fluidized-bed firing systems for solid fuels for the boiler 107. EN 12952-18:2012 Water-tube boilers and auxiliary installations – Part 18: Operating instructions 108. EN 12953-1:2012 Shell boilers – Part 1: General 109. EN 12953-2:2012 Shell boilers – Part 2: Materials for pressure parts of boilers and accessories 110. EN 12953-3:2016 Shell boilers – Part 3: Design and calculation for pressure parts 111. EN 12953-4:2018 Shell boilers – Part 4: Workmanship and construction of pressure parts of the boiler 112. EN 12953-5:2020 Shell boilers – Part 5: Inspection during construction, documentation and marking of pressure parts of the boiler 113. EN 12953-6:2011 Shell Boilers – Part 6: Requirements for equipment for the boiler 114. EN 12953-7:2002 Shell boilers – Part 7: Requirements for firing systems for liquid and gaseous fuels for the boilers 115. EN 12953-8:2001 Shell boilers – Part 8: Requirements for safeguards against excessive pressure EN 12953-8:2001/AC:2002 116. EN 12953-9:2007 Shell boilers – Part 9: Requirements for limiting devices of the boiler and accessories 117. EN 12953-12:2003 Shell boilers – Part 12: Requirements for grate firing systems for solid fuels for the boiler 118. EN 12953-13:2012 Shell boilers – Part 13: Operating instructions 119. EN 13121-1:2021 GRP tanks and vessels for use above ground – Part 1: Raw materials – Specification conditions and acceptance criteria 120. EN 13121-2:2003 GRP tanks and vessels for use above ground – Part 2: Composite materials – Chemical resistance 121. EN 13121-3:2016 GRP tanks and vessels for use above ground – Part 3: Design and workmanship 122. EN 13134:2000 Brazing – Procedure approval 123. EN 13136:2013+A1:2018 Refrigerating systems and heat pumps – Pressure relief devices and their associated piping – Methods for calculation 124. EN 13175:2019+A1:2020 LPG Equipment and accessories – Specification and testing for Liquefied Petroleum Gas (LPG) pressure vessel valves and fittings 125. EN 13348:2016 Copper and copper alloys – Seamless, round copper tubes for medical gases or vacuum 126. EN 13371:2001 Cryogenic vessels – Couplings for cryogenic service 127. EN 13397:2001 Industrial valves – Diaphragm valves made of metallic materials 128. EN 13445-1:2021 Unfired pressure vessels – Part 1: General 129. EN 13445-2:2021+A1:2023 Unfired pressure vessels – Part 2: Materials 130. EN 13445-3:2021 Unfired pressure vessels – Part 3: Design 131. EN 13445-4:2021+A1:2023 Unfired pressure vessels – Part 4: Fabrication 132. EN 13445-5:2021 Unfired pressure vessels – Part 5: Inspection and testing 133. EN 13445-6:2021 Unfired pressure vessels – Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron 134. EN 13445-8:2021 Unfired pressure vessels – Part 8: Additional requirements for pressure vessels of aluminium and aluminium alloys 135. EN 13445-10:2021 Unfired pressure vessels – Part 10: Additional requirements for pressure vessels of nickel and nickel alloys 136. EN 13458-1:2002 Cryogenic vessels – Static vacuum insulated vessels – Part 1: Fundamental requirements 137. EN 13458-2:2002 Cryogenic vessels – Static vacuum insulated vessels – Part 2: Design, fabrication, inspection and testing EN 13458-2:2002/AC:2006 138. EN 13480-1:2017 Metallic industrial piping – Part 1: General EN 13480-1:2017/A1:2019 139. EN 13480-2:2017 Metallic industrial piping – Part 2: Materials EN 13480-2:2017/A3:2018 EN 13480-2:2017/A1:2018 EN 13480-2:2017/A2:2018 EN 13480-2:2017/A7:2020 EN 13480-2:2017/A8:2021 140. EN 13480-3:2017 Metallic industrial piping – Part 3: Design and calculation EN 13480-3:2017/A3:2020 EN 13480-3:2017/A2:2020 EN 13480-3:2017/A1:2021 EN 13480-3:2017/A4:2021 EN 13480-3:2017/A5:2022 141. EN 13480-4:2012 Metallic industrial piping – Part 4: Fabrication and installation EN 13480-4:2012/A1:2013 EN 13480-4:2012/A2:2015 142. EN 13480-5:2017 Metallic industrial piping – Part 5: Inspection and testing EN 13480-5:2017/A1:2019 EN 13480-5:2017/A2:2021 143. EN 13480-6:2017 Metallic industrial piping – Part 6: Additional requirements for buried piping EN 13480-6:2017/A1:2019 144. EN 13480-8:2017 Metallic industrial piping – Part 8: Additional requirements for aluminium and aluminium alloy piping 145. EN 13547:2013 Industrial valves – Copper alloy ball valves 146. EN ISO 13585:2012 Brazing – Qualification test of brazers and brazing operators (ISO 13585:2012) 147. EN 13648-1:2008 Cryogenic vessels – Safety devices for protection against excessive pressure – Part 1: Safety valves for cryogenic service 148. EN 13648-2:2002 Cryogenic vessels – Safety devices for protection against excessive pressure – Part 2: Bursting disc safety devices for cryogenic service 149. EN 13709:2010 Industrial valves – Steel globe and globe stop and check valves 150. EN 13789:2010 Industrial valves – Cast iron globe valves 151. EN 13799:2022 LPG equipment and accessories – Contents gauges for Liquefied Petroleum Gas (LPG) pressure vessels 152. EN 13831:2007 Closed expansion vessels with built in diaphragm for installation in water 153. EN 13835:2012 Founding – Austenitic cast irons 154. EN 13923:2005 Filament-wound FRP pressure vessels – Materials, design, manufacturing and testing 155. EN 14129:2014 LPG Equipment and accessories – Pressure relief valves for LPG pressure vessels 156. EN 14197-1:2003 Cryogenic vessels – Static non-vacuum insulated vessels – Part 1: Fundamental requirements 157. EN 14197-2:2003 Cryogenic vessels – Static non-vacuum insulated vessels – Part 2: Design, fabrication, inspection and testing EN 14197-2:2003/A1:2006 EN 14197-2:2003/AC:2006 158. EN 14197-3:2004 Cryogenic vessels – Static non-vacuum insulated vessels – Part 3: Operational requirements EN 14197-3:2004/A1:2005 EN 14197-3:2004/AC:2004 159. EN 14222:2021 Stainless steel steam boilers 160. EN 14276-1:2020 Pressure equipment for refrigerating systems and heat pumps – Part 1: Vessels – General requirements 161. EN 14276-2:2020 Pressure equipment for refrigerating systems and heat pumps – Part 2: Piping – General requirements 162. EN 14359:2006+A1:2010 Gas-loaded accumulators for fluid power applications 163. EN 14382:2005+A1:2009 Safety devices for gas pressure regulating stations and installations – Gas safety shut-off devices for inlet pressures up to 100 bar EN 14382:2005+A1:2009/AC:2009 164. EN 14394:2005+A1:2008 Heating boilers – Heating boilers with forced draught burners – Nominal heat output not exceeding 10 MW and maximum operating temperature of 110 °C 165. EN 14570:2014 LPG equipment and accessories – Equipping of overground and underground LPG vessels 166. EN 14585-1:2006 Corrugated metal hose assemblies for pressure applications – Part 1: Requirements 167. EN 14917:2021 Metal bellows expansion joints for pressure applications 168. EN 15001-1:2023 Gas Infrastructure – Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations – Part 1: Detailed functional requirements for design, materials, construction, inspection and testing 169. EN ISO 15493:2003 Plastics piping systems for industrial applications – Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) – Specifications for components and the system – Metric series (ISO 15493:2003) EN ISO 15493:2003/A1:2017 170. EN ISO 15494:2018 Plastics piping systems for industrial applications – Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) – Metric series for specifications for components and the system (ISO 15494:2015) 171. EN ISO 15613:2004 Specification and qualification of welding procedures for metallic materials – Qualification based on pre-production welding test (ISO 15613:2004) 172. EN ISO 15614-1:2004 Specification and qualification of welding procedures for metallic materials – Welding procedure test – Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys (ISO 15614-1:2004) EN ISO 15614-1:2004/A1:2008 EN ISO 15614-1:2004/A2:2012 173. EN ISO 15614-2:2005 Specification and qualification of welding procedures for metallic materials – Welding procedure test – Part 2: Arc welding of aluminium and its alloys (ISO 15614-2:2005) EN ISO 15614-2:2005/AC:2009 174. EN ISO 15614-4:2005 Specification and qualification of welding procedures for metallic materials – Welding procedure test – Part 4: Finishing welding of aluminium castings (ISO 15614-4:2005) EN ISO 15614-4:2005/AC:2007 175. EN ISO 15614-5:2004 Specification and qualification of welding procedures for metallic materials – Welding procedure test – Part 5: Arc welding of titanium, zirconium and their alloys (ISO 15614-5:2004) 176. EN ISO 15614-6:2006 Specification and qualification of welding procedures for metallic materials – Welding procedure test – Part 6: Arc and gas welding of copper and its alloys (ISO 15614-6:2006) 177. EN ISO 15614-7:2007 Specification and qualification of welding procedures for metallic materials – Welding procedure test – Part 7: Overlay welding (ISO 15614-7:2007) 178. EN ISO 15614-8:2016 Specification and qualification of welding procedures for metallic materials – Welding procedure test – Part 8: Welding of tubes to tube-plate joints (ISO 15614-8:2016) 179. EN ISO 15614-11:2002 Specification and qualification of welding procedures for metallic materials – Welding procedure test – Part 11: Electron and laser beam welding (ISO 15614-11:2002) 180. EN ISO 15620:2019 Welding – Friction welding of metallic materials (ISO 15620:2019) 181. EN 15776:2022 Unfired pressure vessels – Requirements for the design and fabrication of pressure vessels and pressure vessel parts constructed from cast iron with an elongation after fracture equal or less than 15 % 182. EN ISO 16135:2006 Industrial valves – Ball valves of thermoplastics materials (ISO 16135:2006) EN ISO 16135:2006/A1:2019 183. EN ISO 16136:2006 Industrial valves – Butterfly valves of thermoplastics materials (ISO 16136:2006) EN ISO 16136:2006/A1:2019 184. EN ISO 16137:2006 Industrial valves – Check valves of thermoplastics materials (ISO 16137:2006) EN ISO 16137:2006/A1:2019 185. EN ISO 16138:2006 Industrial valves – Diaphragm valves of thermoplastics materials (ISO 16138:2006) EN ISO 16138:2006/A1:2019 186. EN ISO 16139:2006 Industrial valves – Gate valves of thermoplastics materials (ISO 16139:2006) EN ISO 16139:2006/A1:2019 187. EN 16668:2016+A1:2018 Industrial valves – Requirements and testing for metallic valves as pressure accessories 188. EN 16767:2020 Industrial valves – Metallic check valves 189. EN 17278:2021 Natural gas vehicles – Vehicle fuelling appliances 190. EN ISO 21009-2:2015 Cryogenic vessels – Static vacuum insulated vessels – Part 2: Operational requirements (ISO 21009-2:2015) 191. EN ISO 21013-3:2016 Cryogenic vessels – Pressure-relief accessories for cryogenic service – Part 3: Sizing and capacity determination (ISO 21013-3:2016) 192. EN ISO 21028-1:2016 Cryogenic vessels – Toughness requirements for materials at cryogenic temperature – Part 1: Temperatures below – 80 °C (ISO 21028-1:2016) 193. EN ISO 21028-2:2018 Cryogenic vessels – Toughness requirements for materials at cryogenic temperature – Part 2: Temperatures between -80 degrees C and -20 degrees C (ISO 21028-2:2018) 194. EN ISO 21787:2006 Industrial valves – Globe valves of thermoplastics materials (ISO 21787:2006) EN ISO 21787:2006/A1:2019 195. EN ISO 21922:2021 Refrigerating systems and heat pumps – Valves – Requirements, testing and marking (ISO 21922:2021)

ANNEX IISupplementary provisions

ANNEX II No Reference of the standard Date of withdrawal 1. EN 19:2016 Industrial valves – Marking of metallic valves 31.7.2026 2. EN 12952-3:2011 Water-tube boilers and auxiliary installations – Part 3: Design and calculation for pressure parts of the boiler 31.7.2026 3. EN 12952-8:2002 Water-tube boilers and auxiliary installations – Part 8: Requirements for firing systems for liquid and gaseous fuels for the boiler 31.7.2026 4. EN 12952-9:2002 Water-tube boilers and auxiliary installations – Part 9: Requirements for firing systems for pulverized solid fuels for the boiler 31.7.2026 5. EN 12952-16:2002 Water-tube boilers and auxiliary installations – Part 16: Requirements for grate and fluidized-bed firing systems for solid fuels for the boiler 31.7.2026 6. EN 15001-1:2009 Gas Infrastructure – Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations – Part 1: Detailed functional requirements for design, materials, construction, inspection and testing 31.7.2026 7. EN 15776:2011+A1:2015 Unfired pressure vessels – Requirements for the design and fabrication of pressure vessels and pressure parts constructed from cast iron with an elongation after fracture equal or less than 15 % 31.7.2026

Article 1

Article 2

Article 3

Article 4

Supplementary provisions

ANNEX ISupplementary provisions

ANNEX IISupplementary provisions

ANNEX IIISupplementary provisions

What to look at next