Commission Implementing Decision (EU) 2025/2355 of 13 November 2025 amending Implementing Decision (EU) 2019/450 as regards the publication of references of European Assessment Documents for balcony and terrace glazing systems without vertical frames and external thermal insulation composite systems with rendering system and other construction products

Article 1
The Annex to Implementing Decision (EU) 2019/450 is amended in accordance with the Annex to this Decision.
Article 2
This Decision shall enter into force on the day of its publication in the Official Journal of the European Union .
ANNEX
ANNEX
In the Annex to Implementing Decision (EU) 2019/450, the following rows are inserted in sequential order following the order of the reference numbers:
‘020002-01-0404
Balcony and terrace glazing systems without vertical frames (superseding technical specification ‘EAD 020002-00-0404’)’
‘040083-01-0404
External thermal insulation composite systems with rendering system (superseding technical specification ‘EAD 040083-00-0404’)’
‘040179-00-1201
Factory-made products of extruded, foamed polyethylene terephthalate for thermal insulation’
‘040914-01-0404
Veture kits – prefabricated units for external wall insulation and their fixing devices (superseding technical specification ‘EAD 040914-00-0404’)’
‘041827-00-0401
Kits made of insulation boards with protective finishing for inverted roofs’
‘041871-00-1201
Pre-wall mounting kits for windows and doors’
‘041877-00-0301
Thermal insulation elements of fibre-reinforced polymer which form a thermal break between structural elements’
‘050001-01-0301
Load-bearing thermal insulation elements which form a thermal break between balconies and internal floors (superseding technical specification ‘EAD 050001-00-0301’)’
‘050004-01-0301
Spherical and cylindrical bearings with special sliding material made of ultra-high-molecular-weight polyethylene (superseding technical specification ‘EAD 050004-00-0301’)’
‘050009-01-0301
Spherical and cylindrical bearings with special sliding material made of fluoropolymer (superseding technical specification ‘EAD 050009-00-0301’)’
‘080007-00-0101
Pre-assembled drainage panels made of gabions and geotextile’
‘090034-01-0404
Kits composed by subframe and fixings for fastening claddings and external wall elements (superseding technical specification ‘EAD 090034-00-0404’)’
‘090062-01-0404-v01
Variant: Kits for external wall claddings mechanically fixed – Extension of scope’
‘090074-00-0504
Glass-ceramic panels for external cladding’
‘090142-00-0404
Full-bodied sintered stone slabs for use in claddings, floorings, pavings, stairs, rainscreens and curtain walling kits’
‘090232-00-0404
Kits for self-supporting and interconnected ventilated cavity walls’
‘090240-00-0404
Wood-based composite panel for facades’
‘100005-00-1106
Rigid seismic sway brace for fire sprinkler pipe work’
‘120011-01-0107
Flexible plug expansion joints for road bridges with flexible filling based on a synthetic polymer as binder (superseding technical specification ‘EAD 120011-00-0107’)’
‘120017-00-0106
Wood and metal lighting columns’
‘130337-00-0304
Glued laminated veneer lumber’
‘130740-00-0304
Glulam strengthened by laminated veneer lumber, glued laminated veneer lumber made of finger-jointed laminations and block-glued glulam made thereof’
‘150035-00-0301
Special cements – Carbonation hardening cements requiring a particular curing process’
‘150080-00-0301
Blended cements with high filler content, ground granulated blast-furnace slag or pozzolanic material or both, and clinker’
‘160086-01-0301
Kits for the strengthening of concrete elements by externally bonded and near-surface-mounted carbon fibre-reinforced polymer strips (superseding technical specification ‘EAD 160086-00-0301’)’
‘160129-01-0301
Couplers for mechanical splices of reinforcing steel bars (superseding technical specification ‘EAD 160129-00-0301’)’
‘160202-00-0301
Stud connectors for anchoring in reinforced concrete members as well as for connecting steel members with reinforced concrete members’
‘170051-00-0305
Compressed solid earth blocks with or without lime or cement and wall kits made of these blocks and natural hydraulic lime mortar’
‘200102-00-0302
Column shoes for structural connections of reinforced concrete columns’
‘200116-00-0302
Structural hollow sections of weathering steel’
‘200379-00-0602
Fiber ropes with end connectors’
‘210046-01-1201
Thin metal composite sheets (superseding technical specification ‘EAD 210046-00-1201’)’
‘210058-00-0504-v01
Variant: Assessment of components for wood-based composite panels not produced by the manufacturers themselves’
‘210080-00-0505
Non-load-bearing polyvinyl chloride panels for internal and external walls’
‘220020-01-0402
Low-bitumen-mass shingles, laminated or not, with mineral or synthetic reinforcement (superseding technical specification ‘EAD 220020-00-0402’)’
‘220169-00-0402
Fastening screws with welded or cold-formed set screws’
‘220183-00-0402
Fixing clips and sliding clips for double standing seam roof’
‘230011-00-0106-v01
Variant: Road marking products – Extension of scope’
‘230145-00-0105-v01
Variant: Compound for bitumen and bituminous mixtures based on crumb rubber powder – Extension of scope’
‘230158-00-0101
Stone wool elements used for large-scale water storage in civil works’
‘250005-00-0606
Adhesives for wall claddings’
‘280016-00-0602
Products for installation systems for supporting technical building equipment’
‘330008-04-0601-v01
Variant: Anchor channels under fatigue cyclic shear with different lower load level’
‘330008-04-0601-v02
Variant: Anchor channels for controlled impact screwdrivers’
‘330232-02-0601
Mechanical fasteners for use in concrete (superseding technical specification ‘EAD 330232-01-0601’)’
‘330250-01-0601
Post–installed fasteners in concrete under fatigue cyclic loading (superseding technical specification ‘EAD 330250-00-0601’)’
‘330284-00-0604-v02
Variant: Plastic anchors for redundant non-structural systems in concrete and masonry, and for fixing façade claddings through angle brackets under seismic actions in concrete and masonry’
‘330460-00-0604
Screw anchors for use in masonry’
‘330924-01-0601-v01
Variant: Cast-in anchor bolts under fatigue or seismic actions’
‘331531-00-0602
High-strength structural bolting assemblies for hydraulically operated, friction-less and torsion-free tightening’
‘331846-01-0603
Anchor devices for fastening personal fall protection systems to timber substructures (superseding technical specification ‘EAD 331846-00-0603’)’
‘331985-00-0604
Distance-fixing systems for use in concrete and masonry’
‘332699-00-0601
Kits for connection of precast concrete façade elements to concrete structures based on anchor channels’
‘332707-00-0602
Support fixing assemblies’
‘333915-00-0601
Point fastening kits for roof panels’
‘334812-00-0602
Anchor devices for fastening personal fall protection systems to steel or aluminium trapezoidal sheeting substructures’
‘340024-00-0103
Permanent insulating shuttering kits for whole buildings’
‘340282-00-0303
Load-bearing sandwich panels with foam or polymeric core and skins of structural cement bonded particle boards’
‘340292-00-0303
Earthquake-resistant kits composed of steel-concrete composite beams, columns and beam-column joints’
‘340309-00-0305-v01
Variant: Non-load-bearing permanent shuttering kits or systems based on hollow blocks or panels of insulating materials and sometimes concrete: hollow blocks resistant to seismic actions’
‘340351-00-0104
Fibre-reinforced polymer kits made of a pultruded carbon fibre laminate and an epoxy adhesive’
‘340352-00-0104
Fibre-reinforced polymer kits made of a carbon or glass fabric and an epoxy resin’
‘340549-00-0204
Structural steel composite wall panels for building systems’
‘340739-00-0106
High load-bearing and low load-bearing single anchor earth retaining structures made of steel’
‘351141-00-1104
Fire-resistant reactive air transfer grilles’
‘351281-00-1104
Caps with intumescent inlay for recessed luminaires in fire-resistant suspended ceilings.’
Schedules & Appendices

Cite this act
