LawPlayer
My bookmarks
Source

Regulation (EU) 2025/14 CHAPTER I — SUBJECT MATTER, SCOPE AND DEFINITIONS

Article 1–Article 4 · 4 articles

Compiled from an official source version. Later amendments or repeals may not be reflected; the official text prevails. · Read the official text ↗

Subject matter

Article 1

Open ↗

1.   This Regulation lays down technical requirements, administrative requirements and procedures for EU type-approval, EU individual approval, and placing on the market of all new non-road mobile machinery intended to circulate on public roads. 2.   This Regulation also lays down rules and procedures for the market surveillance of non-road mobile machinery.

Scope

Article 2

Open ↗

1.   This Regulation applies to non-road mobile machinery (‘U-category vehicles’) where it is placed on the market and intended to circulate, whether occasionally or regularly, with or without a driver, on a public road. 2.   This Regulation does not apply to the following: (a) non-road mobile machinery with a maximum design speed exceeding 40 km/h; (b) non-road mobile machinery with a maximum design speed not exceeding 6 km/h; (c) non-road mobile machinery equipped with more than three seating positions, including the driver’s seating position; (d) machinery, as defined in Article 2, point (a), of Directive 2006/42/EC, primarily intended for the transport of one or more persons, animals or goods other than instruments or auxiliaries required for the performance of work, materials resulting from or necessary for work or for intermediate storage, or materials transported on construction sites; (e) vehicles, including motor vehicles, tractors, trailers, two-wheel or three-wheel vehicles, quadricycles and interchangeable towed equipment, falling exclusively within the scope of Regulation (EU) No 167/2013, Regulation (EU) No 168/2013 of the European Parliament and of the Council  ( 14 ) or Regulation (EU) 2018/858; (f) non-road mobile machinery that was placed on the market, registered or entered into service before 29 January 2028. 3.   For the following non-road mobile machinery, the manufacturer may decide to apply for the EU type-approval, to apply for the EU individual approval or to comply with the relevant national law, where appropriate: (a) non-road mobile machinery where the number of units per type does not exceed 70 per year and in each Member State; (b) prototypes of non-road mobile machinery intended to be used on the road under the responsibility of the manufacturer to carry out specific development test programmes or field tests, if they have been specifically designed and constructed for that purpose; (c) non-road mobile machinery designed and constructed for use principally in quarries, ports or airport facilities; (d) vehicles designed and constructed or adapted for use by civil protection, fire services and forces responsible for maintaining public order.

Definitions

Article 3

Open ↗

For the purposes of this Regulation, the following definitions apply: (1) ‘non-road mobile machinery’ means self-propelled mobile machinery with a propulsion system, falling within the scope of Directive 2006/42/EC, that is designed and constructed for the purpose of performing work; (2) ‘new non-road mobile machinery’ means non-road mobile machinery which has never been placed on the market in the Union; (3) ‘system’ means an assembly of devices combined to perform one or more specific functions in non-road mobile machinery and that is subject to the technical requirements; (4) ‘fully automated driving system’ means a driving system of non-road mobile machinery that has been designed and constructed to move autonomously without any driver supervision; (5) ‘component’ means a device that is intended to be part of non-road mobile machinery that can be type-approved independently of that machinery; (6) ‘separate technical unit’ means a device that is intended to be part of non-road mobile machinery that can be type-approved separately; (7) ‘EU type-approval’ means the certification from an approval authority that a type of non-road mobile machinery satisfies the relevant provisions of this Regulation; (8) ‘EU individual approval’ means the certification from an approval authority that particular non-road mobile machinery, whether unique or not, satisfies the relevant provisions of this Regulation; (9) ‘market surveillance authority’ means the authority of a Member State responsible for carrying out market surveillance in the territory of that Member State; (10) ‘approval authority’ means the authority of a Member State, notified to the Commission by that Member State, with competence for all aspects of the type-approval of non-road mobile machinery, for issuing and, if appropriate, for withdrawing or refusing approval certificates, for acting as the contact point for the approval authorities of the other Member States, for designating the technical services and for ensuring that the manufacturer meets its obligations regarding the conformity of production; (11) ‘national authority’ means an approval authority or any other authority involved in and responsible for market surveillance, border control or registration in a Member State in respect of non-road mobile machinery; (12) ‘technical service’ means an independent organisation or body designated by an approval authority as a testing laboratory to carry out tests or as a conformity assessment body to carry out the initial assessment and other tests or inspections, on behalf of the approval authority, although it is possible for the approval authority itself to carry out those functions; (13) ‘manufacturer’ means any natural or legal person who manufactures non-road mobile machinery or has non-road mobile machinery designed or manufactured, and markets that machinery under that person’s name or trade mark; (14) ‘manufacturer’s representative for market surveillance’ means any natural or legal person established in the Union who is duly appointed by the manufacturer to carry out the tasks specified in Article 9; (15) ‘manufacturer’s representative for EU type-approval’ means any natural or legal person established in the Union who is duly appointed by the manufacturer, on the basis of an agreement, to carry out all of the manufacturer’s obligations related to the EU type-approval and the relevant procedures, including the tasks specified in Articles 18, 19 and 22; this agreement must be presented at the request of the approval authority; (16) ‘importer’ means a natural or legal person established in the Union who places on the market non-road mobile machinery that has been manufactured in a third country; (17) ‘distributor’ means a dealer or any other natural or legal person in the supply chain, other than the manufacturer or the importer, who makes available on the market non-road mobile machinery; (18) ‘economic operator’ means the manufacturer, the manufacturer’s representative for market surveillance, the importer or the distributor; (19) ‘placing on the market’ means making available non-road mobile machinery for the first time in the Union; (20) ‘making available on the market’ means any supply of non-road mobile machinery for distribution or use on the market in the course of a commercial activity, whether in return for payment or free of charge; (21) ‘entry into service’ means the first use, for its intended purpose, in the Union, of non-road mobile machinery; (22) ‘registration’ means the administrative authorisation for the entry into service, in the Union, for circulation on public roads of non-road mobile machinery, involving the identification of the latter and the issuance of a permanent or temporary serial number to be known as the registration number; (23) ‘EU type-approval certificate’ means the document issued by the approval authority which certifies that a type of non-road mobile machinery is type-approved in accordance with this Regulation; (24) ‘EU individual approval certificate’ means the document issued by the approval authority which certifies that particular non-road mobile machinery is individually approved in accordance with this Regulation; (25) ‘certificate of conformity’ means the document issued by the manufacturer, as provided for in this Regulation, which certifies that produced non-road mobile machinery conforms to the approved type of non-road mobile machinery; (26) ‘non-road mobile machinery type’ means a particular non-road mobile machinery group, including variants and versions of variants of that machinery, that shares at least the following essential aspects: (a) manufacturer, (b) type designation given by the manufacturer, (c) essential design and construction characteristics, (d) backbone chassis, chassis with side members or articulated chassis (obvious and fundamental differences); (27) ‘variant’ means non-road mobile machinery of the same type which does not differ in at least the following aspects, where applicable: (a) body structural concept or type of body work, (b) stage of completion, (c) propulsion system (internal combustion engine, hybrid, electric, hybrid-electric or other), (d) operating principle, (e) powered axles (number, position, interconnection), (f) transmission (type), (g) protective structures, (h) braked axles (number); (28) ‘version of a variant’ means vehicles which consist of a combination of characteristics shown in the information package; (29) ‘technical requirements’ means the technical requirements listed in Article 16; (30) ‘information package’ means the information package referred to in Article 20(4); (31) ‘holder of EU type-approval’ means the natural or legal person who applied for EU type-approval and to whom an EU type-approval certificate has been issued; (32) ‘non-road mobile machinery presenting a serious risk’ means non-road mobile machinery that, based on an appropriate risk assessment that takes into account the nature of the hazard and the likelihood of its occurrence, presents a serious risk in relation to its safe circulation on public roads and other aspects covered by this Regulation; (33) ‘recall’ means any measure aiming to achieve the return of non-road mobile machinery that has already been made available to a user; (34) ‘virtual testing method’ means computer simulations, including calculations, to demonstrate that non-road mobile machinery fulfils the technical requirements without requiring the use of a physical vehicle, system, component or separate technical unit; (35) ‘seating position’ means any location on non-road mobile machinery capable of accommodating one person seated.

Vehicle category of non-road mobile machinery

Article 4

Open ↗

For the purposes of this Regulation, the following vehicle category shall apply for all non-road mobile machinery type-approved under this Regulation: ‘category U’.

Back to Regulation (EU) 2025/14 — full text

Articles on this page are reproduced verbatim from official open data. See the attribution line.

Source: EUR-Lex (Publications Office of the EU), © European Union, reuse permitted under Commission Decision 2011/833/EU.

What to look at next