Summary of product characteristics for a biocidal product family
ANNEX IISupplementary provisions
ANNEX II
Summary of product characteristics for a biocidal product family
Sodium hypochlorite Liquid disinfectant biocidal product family
Product type(s)
PT02: Disinfectants and algaecides not intended for direct application to humans or animals
PT04: Food and feed area
Authorisation number EU-0029289-0000
R4BP asset number EU-0029289-0000
Part I.
FIRST INFORMATION LEVEL
1. ADMINISTRATIVE INFORMATION
1.1. Family name
Name
Sodium hypochlorite Liquid disinfectant biocidal product family
1.2. Product type(s)
Product type(s)
PT02: Disinfectants and algaecides not intended for direct application to humans or animals
PT04: Food and feed area
1.3. Authorisation holder
Name and address of the authorisation holder
Name
Reckitt Benckiser Production (Poland) Sp z o.o.
Address
Okunin 1 05-100 Nowy Dwor Mazowiecki PL
Authorisation number
EU-0029289-0000
R4BP asset number
EU-0029289-0000
Date of the authorisation
13 April 2025
Expiry date of the authorisation
31 March 2035
1.4. Manufacturer(s) of the product
Name of manufacturer
Reckitt Benckiser (UK) Ltd
Address of manufacturer
Sinfin Lane DE24 9GG Derby United Kingdom of Great Britain and Northern Ireland (the)
Location of manufacturing sites
Reckitt Benckiser (UK) Ltd site 1
Sinfin Lane DE24 9GG Derby United Kingdom of Great Britain and Northern Ireland (the)
Name of manufacturer
Reckitt Benckiser Production (Poland) sp z.o.o
Address of manufacturer
Ul. Okunin 1 05-100 Nowy Dwor Mazowiecki Poland
Location of manufacturing sites
Reckitt Benckiser Production (Poland) sp z.o.o site 1
Ul. Okunin 1 05-100 Nowy Dwor Mazowiecki Poland
1.5. Manufacturer(s) of the active substance(s)
Active substance
Active chlorine released from sodium hypochlorite
Name of manufacturer
PCC Rokita S.A
Address of manufacturer
Ul. Sienkiewicza 56-120 Brzeg Dolny Poland
Location of manufacturing sites
PCC Rokita S.A site 1
Ul. Sienkiewicza 56-120 Brzeg Dolny Poland
Active substance
Active chlorine released from sodium hypochlorite
Name of manufacturer
ANWIL S.A
Address of manufacturer
Ul. Toruńska 222 87-805 Wloclawek Poland
Location of manufacturing sites
ANWIL S.A site 1
Ul. Toruńska 222 87-805 Wloclawek Poland
Active substance
Active chlorine released from sodium hypochlorite
Name of manufacturer
Brenntag UK Ltd
Address of manufacturer
90 Brunel Way IP24 1HP Thetford United Kingdom of Great Britain and Northern Ireland (the)
Location of manufacturing sites
Brenntag UK Ltd site 1
90 Brunel Way IP24 1HP Thetford United Kingdom of Great Britain and Northern Ireland (the)
Active substance
Active chlorine released from sodium hypochlorite
Name of manufacturer
INOVYN ChlorVinyls Limited
Address of manufacturer
South Parade, PO Box 9 WA7 4JE Runcorn United Kingdom of Great Britain and Northern Ireland (the)
Location of manufacturing sites
INOVYN ChlorVinyls Limited site 1
South Parade, PO Box 9, WA7 4JE Runcorn United Kingdom of Great Britain and Northern Ireland (the)
Active substance
Active chlorine released from sodium hypochlorite
Name of manufacturer
BORSODCHEM ZRT
Address of manufacturer
Bolyai tér 1 H-3700 Kazincbarcika Hungary
Location of manufacturing sites
BORSODCHEM ZRT site 1
Bolyai tér 1. H-3700 Kazincbarcika Hungary
2. PRODUCT FAMILY COMPOSITION AND FORMULATION
2.1. Qualitative and quantitative information on the composition of the family
Common name
IUPAC name
Function
CAS number
EC number
Content (%)
Active chlorine released from sodium hypochlorite
active substance
0,94 - 5,81 % (w/w)
Sodium hypochlorite
Sodium hypochlorite
releaser
7681-52-9
231-668-3
6,83 - 42,07 % (w/w)
Sodium hydroxide
Sodium hydroxide
Non-Active substance
1310-73-2
215-185-5
0,1 - 3,5 % (w/w)
Amines, C12-14 (even numbered)-alkyldimethyl, N-oxides
Amines, C12-14 (even numbered)-alkyldimethyl, N-oxides
Non-Active substance
308062-28-4
931-292-6
0 - 0,85 % (w/w)
2.2. Type(s) of formulation
Formulation type(s)
Ready to use liquid
Part II.
SECOND INFORMATION LEVEL - META SPC(S)
1. META SPC 1 ADMINISTRATIVE INFORMATION
1.1. Meta SPC 1 identifier
Identifier
Meta SPC: Meta SPC A
1.2. Suffix to the authorisation number
Number
1-1
1.3. Product type(s)
Product type(s)
PT02: Disinfectants and algaecides not intended for direct application to humans or animals
2. META SPC 1 COMPOSITION
2.1. Qualitative and quantitative information on the composition of the meta SPC 1
Common name
IUPAC name
Function
CAS number
EC number
Content (%)
Active chlorine released from sodium hypochlorite
active substance
1,93 - 1,93 % (w/w)
Sodium hypochlorite
Sodium hypochlorite
releaser
7681-52-9
231-668-3
13,965 - 13,965 % (w/w)
Sodium hydroxide
Sodium hydroxide
Non-Active substance
1310-73-2
215-185-5
1,07 - 1,07 % (w/w)
2.2. Type(s) of formulation of the meta SPC 1
Formulation type(s)
Ready to use liquid
3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 1
Hazard statements
H290: May be corrosive to metals.
H314: Causes severe skin burns and eye damage.
H412: Harmful to aquatic life with long lasting effects.
EUH206: Warning! Do not use together with other products. May release dangerous gases (chlorine).
Precautionary statements
P101: If medical advice is needed, have product container or label at hand.
P102: Keep out of reach of children.
P103: Read carefully and follow all instructions.
P234: Keep only in original packaging.
P260: Do not breathe vapours.
P260: Do not breathe spray.
P264: Wash hands thoroughly after handling.
P273: Avoid release to the environment.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P363: Wash contaminated clothing before reuse.
P390: Absorb spillage to prevent material damage.
P406: Store in a corrosive resistant container with a resistant inner liner.
P301+P330+P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting.
P310: Immediately call a POISON CENTER.
P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].
P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P405: Store locked up.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P501: Dispose of contents in accordance with local/regional regulations.
P501: Dispose of container in accordance with local/regional regulations.
4. AUTHORISED USE(S) OF THE META SPC
4.1. Use description
Table 1.
Toilet bowl disinfection
Product type
PT02: Disinfectants and algaecides not intended for direct application to humans or animals
Where relevant, an exact description of the authorised use
-
Target organism(s) (including development stage)
Scientific name: Bacteria
Common name: Bacteria
Development stage: Other
Scientific name: Fungi
Common name: fungi
Development stage: Other
Scientific name: Yeast
Common name: Yeast
Development stage: other
Scientific name: Virus
Common name: Virus
Development stage: Other
Field(s) of use
indoor use
Indoor (domestic, institutional and medical areas)
Application method(s)
Method: Pouring
Detailed description: -
Application rate(s) and frequency
Application rate: 80 ml/toilet bowl
Ready to use product
Number and timing of application: -
Contact time: Bacteria, yeast, fungi and virus: 15 min
Room temperature
Category(ies) of users
professional ; general public (non-professional)
Pack sizes and packaging material
500 mL, 680 mL, 700 mL, 750 mL, 1L opaque HDPE bottles. Plastic (polypropylene) cap. Plastic insert plug and bent bottle neck (LDPP)
CLP regulation apply, as products are classified H314, child proof closure and a tactile warning are required for packaging of non professional users.
4.1.1. Use-specific instructions
See general directions for use.
4.1.2. Use-specific risk mitigation measures
See general directions for use.
4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use.
4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use.
4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use.
5. GENERAL DIRECTIONS FOR USE OF THE META SPC 1
5.1. Instructions for use
—
Comply with the instruction for use.
—
For healthcare settings: clean carefully the surfaces before application of the product.
—
Respect the conditions of use of the product (concentration, contact time, temperature, etc.).
—
Squeeze and apply slowly all around the inside of the bowl, allowing enough liquid to cover the bowl completely.
—
The recommended dose is approximately 80 mL.
—
Products should not be used in conjunction with acids or ammonia.
—
No other cleaning agents should be used in conjunction with the product.
—
Inform the registration holder if the treatment is ineffective.
5.2. Risk mitigation measures
For professional users:
Wear personal protective equipment during application of the products:
—
chemical resistant gloves classified under EN 374 or equivalent;
—
chemical goggles classified under EN 16321 or equivalent;
—
protective coverall in accordance with EN 13034 or equivalent;
(material to be specified by the authorisation holder within the product information)
The full texts of the EN standards are available in Section 6
This is without prejudice to the application of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work. See section 6 for the full reference to this act.
For non-professional users:
—
Do not touch the product during application
—
Wash hands after use
—
Avoid contact with skin and eyes
—
Avoid splashes during application
5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
—
IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor.
—
IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112/ambulance for medical assistance.
—
Information to Healthcare personnel/doctor:
—
The eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid.
—
IF SWALLOWED: Immediately rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call 112/ambulance for medical assistance.
—
IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing.
—
If symptoms: Call 112/ambulance for medical assistance.
—
If no symptoms: Call a POISON CENTRE or a doctor.
—
If medical advice is needed, have product container or label at hand.
5.4. Instructions for safe disposal of the product and its packaging
—
Do not discharge unused product on the ground, into water courses, into pipes (sink, toilets…) nor down the drains.
—
Dispose of unused product, its packaging and all other waste, in accordance with local regulations.
5.5. Conditions of storage and shelf-life of the product under normal conditions of storage
—
Shelf-life: 24 months.
—
Do not store above 30°C.
—
Protect from direct sunlight.
—
Keep out of reach of children and non-target animals/pets.
6. OTHER INFORMATION
The full titles of the EN standards and legal act referenced in section 5.2 “Risk mitigation measures” are:
EN 374 - Protective gloves against dangerous chemicals and micro-organisms
EN 16321 - Eye and face protection for occupational use
EN 13034 - Protective clothing against liquid chemicals - Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment)
Council Directive 98/24/EC of 7 April 1998 on the protection of the health and safety of workers from the risks related to chemical agents at work (fourteenth individual Directive within the meaning of Article 16(1) of Directive 89/391/EEC) ( OJ L 131, 5.5.1998, p. 11 ).
7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 1
7.1. Trade name(s), authorisation number and specific composition of each individual product
Trade name(s)
White & Shine Original 1
Market area: EU
Authorisation number
EU-0029289-0001 1-1
Common name
IUPAC name
Function
CAS number
EC number
Content (%)
Active chlorine released from sodium hypochlorite
active substance
1,93 % (w/w)
Sodium hypochlorite
Sodium hypochlorite
releaser
7681-52-9
231-668-3
13,965 % (w/w)
Sodium hydroxide
Sodium hydroxide
Non-Active substance
1310-73-2
215-185-5
1,07 % (w/w)
7.2. Trade name(s), authorisation number and specific composition of each individual product
Trade name(s)
White & Shine Original 2
Market area: EU
Authorisation number
EU-0029289-0002 1-1
Common name
IUPAC name
Function
CAS number
EC number
Content (%)
Active chlorine released from sodium hypochlorite
active substance
1,93 % (w/w)
Sodium hypochlorite
Sodium hypochlorite
releaser
7681-52-9
231-668-3
13,965 % (w/w)
Sodium hydroxide
Sodium hydroxide
Non-Active substance
1310-73-2
215-185-5
1,07 % (w/w)
7.3. Trade name(s), authorisation number and specific composition of each individual product
Trade name(s)
White & Shine Citrus
Market area: EU
Authorisation number
EU-0029289-0003 1-1
Common name
IUPAC name
Function
CAS number
EC number
Content (%)
Active chlorine released from sodium hypochlorite
active substance
1,93 % (w/w)
Sodium hypochlorite
Sodium hypochlorite
releaser
7681-52-9
231-668-3
13,965 % (w/w)
Sodium hydroxide
Sodium hydroxide
Non-Active substance
1310-73-2
215-185-5
1,07 % (w/w)
7.4. Trade name(s), authorisation number and specific composition of each individual product
Trade name(s)
White & Shine Eucalyptus Mint
Market area: EU
Authorisation number
EU-0029289-0004 1-1
Common name
IUPAC name
Function
CAS number
EC number
Content (%)
Active chlorine released from sodium hypochlorite
active substance
1,93 % (w/w)
Sodium hypochlorite
Sodium hypochlorite
releaser
7681-52-9
231-668-3
13,965 % (w/w)
Sodium hydroxide
Sodium hydroxide
Non-Active substance
1310-73-2
215-185-5
1,07 % (w/w)
1. META SPC 2 ADMINISTRATIVE INFORMATION
1.1. Meta SPC 2 identifier
Identifier
Meta SPC: Meta SPC B
1.2. Suffix to the authorisation number
Number
1-2
1.3. Product type(s)
Product type(s)
PT02: Disinfectants and algaecides not intended for direct application to humans or animals
2. META SPC 2 COMPOSITION
2.1. Qualitative and quantitative information on the composition of the meta SPC 2
Common name
IUPAC name
Function
CAS number
EC number
Content (%)
Active chlorine released from sodium hypochlorite
active substance
0,95 - 0,95 % (w/w)
Sodium hypochlorite
Sodium hypochlorite
releaser
7681-52-9
231-668-3
6,9 - 6,9 % (w/w)
Sodium hydroxide
Sodium hydroxide
Non-Active substance
1310-73-2
215-185-5
3,5 - 3,5 % (w/w)
2.2. Type(s) of formulation of the meta SPC 2
Formulation type(s)
Ready to use liquid
3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 2
Hazard statements
H290: May be corrosive to metals.
H314: Causes severe skin burns and eye damage.
H412: Harmful to aquatic life with long lasting effects.
Precautionary statements
P101: If medical advice is needed, have product container or label at hand.
P102: Keep out of reach of children.
P103: Read carefully and follow all instructions.
P234: Keep only in original packaging.
P260: Do not breathe vapours.
P260: Do not breathe spray
P264: Wash hands thoroughly after handling.
P273: Avoid release to the environment.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P301+P330+P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting.
P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P363: Wash contaminated clothing before reuse.
P390: Absorb spillage to prevent material damage.
P310: Immediately call a poison center.
P406: Store in a corrosive resistant container with a resistant inner liner.
P405: Store locked up.
P501: Dispose of contents in accordance with local/regional regulations.
P501: Dispose of container in accordance with local/regional regulations.
4. AUTHORISED USE(S) OF THE META SPC
4.1. Use description
Table 1.
Toilet bowl disinfection
Product type
PT02: Disinfectants and algaecides not intended for direct application to humans or animals
Where relevant, an exact description of the authorised use
-
Target organism(s) (including development stage)
Scientific name: Bacteria
Common name: Bacteria
Development stage: Other
Scientific name: Fungi
Common name: fungi
Development stage: Other
Scientific name: Yeast
Common name: Yeast
Development stage: other
Field(s) of use
indoor use
Indoor (domestic, institutional and medical areas)
Application method(s)
Method: pouring
Detailed description: -
Application rate(s) and frequency
Application rate: 80 ml/toilet bowl
Ready to use product.
Number and timing of application: -
Contact time: Bacteria, yeast and fungi: 15 minutes
Room temperature
Category(ies) of users
professional ; general public (non-professional)
Pack sizes and packaging material
500 mL, 680 mL, 700 mL, 750 mL, 1 L opaque HDPE bottles. Plastic (polypropylene) cap. Plastic insert plug and bent bottle neck (LDPP).
CLP regulation apply, as products are classified H314, child proof closure and a tactile warning are required for packaging of non professional users.
4.1.1. Use-specific instructions
See general directions for use.
4.1.2. Use-specific risk mitigation measures
See general directions for use.
4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use.
4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use.
4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use.
5. GENERAL DIRECTIONS FOR USE OF THE META SPC 2
5.1. Instructions for use
—
Comply with the instruction for use.
—
For healthcare settings: clean carefully the surfaces before application of the product.
—
Respect the conditions of use of the product (concentration, contact time, temperature, etc.).
—
Squeeze and apply slowly all around the inside of the bowl, allowing enough liquid to cover the bowl completely.
—
The recommended dose is approximately 80 mL.
—
Products should not be used in conjunction with acids or ammonia.
—
No other cleaning agents should be used in conjunction with the product.
—
Inform the registration holder if the treatment is ineffective.
5.2. Risk mitigation measures
For professional users:
Wear personal protective equipment during application of the products:
—
chemical resistant gloves classified under EN 374 or equivalent;
—
chemical goggles classified under EN 16321 or equivalent;
—
protective coverall in accordance with EN 13034 or equivalent.
(material to be specified by the authorisation holder within the product information)
The full texts of the EN standards are available in Section 6
This is without prejudice to the application of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work. See section 6 for the full reference to this act.
For non-professional users:
—
Do not touch the product during application
—
Wash hands after use
—
Avoid contact with skin and eyes
—
Avoid splashes during application
5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
—
IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor.
—
IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112/ambulance for medical assistance.
—
Information to Healthcare personnel/doctor:
—
The eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid.
—
IF SWALLOWED: Immediately rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call 112/ambulance for medical assistance.
—
IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing.
—
If symptoms: Call 112/ambulance for medical assistance.
—
If no symptoms: Call a POISON CENTRE or a doctor.
—
If medical advice is needed, have product container or label at hand.
5.4. Instructions for safe disposal of the product and its packaging
—
Do not discharge unused product on the ground, into water courses, into pipes (sink, toilets…) nor down the drains.
—
Dispose of unused product, its packaging and all other waste, in accordance with local regulations.
5.5. Conditions of storage and shelf-life of the product under normal conditions of storage
—
Shelf-life: 18 months.
—
Do not store above 30°C.
—
Protect from direct sunlight.
—
Keep out of reach of children and non-target animals/pets.
6. OTHER INFORMATION
The full titles of the EN standards and legal act referenced in section 5.2 “Risk mitigation measures” are:
EN 374 - Protective gloves against dangerous chemicals and micro-organisms
EN 16321 - Eye and face protection for occupational use
EN 13034 - Protective clothing against liquid chemicals - Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment)
Council Directive 98/24/EC of 7 April 1998 on the protection of the health and safety of workers from the risks related to chemical agents at work (fourteenth individual Directive within the meaning of Article 16(1) of Directive 89/391/EEC) ( OJ L 131, 5.5.1998, p. 11 ).
7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 2
7.1. Trade name(s), authorisation number and specific composition of each individual product
Trade name(s)
Power Stain & Drain
Market area: EU
Authorisation number
EU-0029289-0005 1-2
Common name
IUPAC name
Function
CAS number
EC number
Content (%)
Active chlorine released from sodium hypochlorite
active substance
0,95 % (w/w)
Sodium hypochlorite
Sodium hypochlorite
releaser
7681-52-9
231-668-3
6,9 % (w/w)
Sodium hydroxide
Sodium hydroxide
Non-Active substance
1310-73-2
215-185-5
3,5 % (w/w)
7.2. Trade name(s), authorisation number and specific composition of each individual product
Trade name(s)
Power & Pure White & Shine
Market area: EU
Authorisation number
EU-0029289-0006 1-2
Common name
IUPAC name
Function
CAS number
EC number
Content (%)
Active chlorine released from sodium hypochlorite
active substance
0,95 % (w/w)
Sodium hypochlorite
Sodium hypochlorite
releaser
7681-52-9
231-668-3
6,9 % (w/w)
Sodium hydroxide
Sodium hydroxide
Non-Active substance
1310-73-2
215-185-5
3,5 % (w/w)
1. META SPC 3 ADMINISTRATIVE INFORMATION
1.1. Meta SPC 3 identifier
Identifier
Meta SPC: Meta SPC C
1.2. Suffix to the authorisation number
Number
1-3
1.3. Product type(s)
Product type(s)
PT02: Disinfectants and algaecides not intended for direct application to humans or animals
2. META SPC 3 COMPOSITION
2.1. Qualitative and quantitative information on the composition of the meta SPC 3
Common name
IUPAC name
Function
CAS number
EC number
Content (%)
Active chlorine released from sodium hypochlorite
active substance
4,28 - 4,54 % (w/w)
Sodium hypochlorite
Sodium hypochlorite
releaser
7681-52-9
231-668-3
31,005 - 32,87 % (w/w)
Sodium hydroxide
Sodium hydroxide
Non-Active substance
1310-73-2
215-185-5
1 - 1 % (w/w)
2.2. Type(s) of formulation of the meta SPC 3
Formulation type(s)
Ready to use liquid
3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 3
Hazard statements
H290: May be corrosive to metals.
H314: Causes severe skin burns and eye damage.
H410: Very toxic to aquatic life with long lasting effects.
EUH206: Warning! Do not use together with other products. May release dangerous gases (chlorine).
Precautionary statements
P101: If medical advice is needed, have product container or label at hand.
P102: Keep out of reach of children.
P234: Keep only in original packaging.
P264: Wash hands thoroughly after handling.
P273: Avoid release to the environment.
P280: Wear protective gloves/protective clothing/eye protection/face protection..
P301+P330+P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting.
P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P363: Wash contaminated clothing before reuse.
P390: Absorb spillage to prevent material damage.
P391: Collect spillage.
P406: Store in a corrosive resistant container with a resistant inner liner.
P103: Read carefully and follow all instructions.
P260: Do not breathe vapours.
P260: Do not breathe spray.
P310: Immediately call a poison center.
P405: Store locked up.
P501: Dispose of contents in accordance with local/regional regulations.
P501: Dispose of container in accordance with local/regional regulations.
4. AUTHORISED USE(S) OF THE META SPC
4.1. Use description
Table 1.
Toilet bowl disinfection
Product type
PT02: Disinfectants and algaecides not intended for direct application to humans or animals
Where relevant, an exact description of the authorised use
-
Target organism(s) (including development stage)
Scientific name: Bacteria
Common name: Bacteria
Development stage: Other
Scientific name: Fungi
Common name: fungi
Development stage: Other
Scientific name: Yeast
Common name: Yeast
Development stage: other
Field(s) of use
indoor use
Indoor (domestic, institutional and medical areas)
Application method(s)
Method: pouring
Detailed description: -
Application rate(s) and frequency
Application rate: 80 ml/ toilet bowl
Ready to use product.
Number and timing of application: -
Contact time: Bacteria, yeast and fungi: 15 minutes
Room temperature
Category(ies) of users
professional ; general public (non-professional)
Pack sizes and packaging material
500 mL, 680 mL, 700 mL, 750 mL opaque HDPE bottles. Plastic (polypropylene) cap. Plastic insert plug and bent bottle neck (LDPP).
CLP regulation apply, as products are classified H314, child proof closure and a tactile warning are required for packaging of non professional users.
4.1.1. Use-specific instructions
See general directions for use.
4.1.2. Use-specific risk mitigation measures
See general directions for use.
4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use.
4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use.
4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use.
5. GENERAL DIRECTIONS FOR USE OF THE META SPC 3
5.1. Instructions for use
—
Comply with the instruction for use.
—
For healthcare settings: clean carefully the surfaces before application of the product.
—
Respect the conditions of use of the product (concentration, contact time, temperature, etc.).
—
Squeeze and apply slowly all around the inside of the bowl, allowing enough liquid to cover the bowl completely.
—
The recommended dose is approximately 80 mL.
—
Products should not be used in conjunction with acids or ammonia.
—
No other cleaning agents should be used in conjunction with the product.
—
Inform the registration holder if the treatment is ineffective.
5.2. Risk mitigation measures
For professional users:
Wear personal protective equipment during application of the products:
—
chemical resistant gloves classified under EN 374 or equivalent;
—
chemical goggles classified under EN 16321 or equivalent;
—
protective coverall in accordance with EN 13034 or equivalent.
—
(material to be specified by the authorisation holder within the product information)
The full texts of the EN standards are available in Section 6
This is without prejudice to the application of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work. See section 6 for the full reference to this act.
For non-professional users:
—
Do not touch the product during application
—
Wash hands after use
—
Avoid contact with skin and eyes
—
Avoid splashes during application
5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
—
IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor.
—
IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112/ambulance for medical assistance.
—
Information to Healthcare personnel/doctor:
—
The eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid
—
IF SWALLOWED: Immediately rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call 112/ambulance for medical assistance.
—
IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing.
—
If symptoms: Call 112/ambulance for medical assistance.
—
If no symptoms: Call a POISON CENTRE or a doctor.
—
If medical advice is needed, have product container or label at hand.
5.4. Instructions for safe disposal of the product and its packaging
—
Do not discharge unused product on the ground, into water courses, into pipes (sink, toilets…) nor down the drains.
—
Dispose of unused product, its packaging and all other waste, in accordance with local regulations.
5.5. Conditions of storage and shelf-life of the product under normal conditions of storage
—
Shelf-life: 24 months.
—
Do not store above 30°C.
—
Protect from direct sunlight.
—
Keep out of reach of children and non-target animals/pets.
6. OTHER INFORMATION
The full titles of the EN standards and legal act referenced in section 5.2 “Risk mitigation measures” are:
EN 374 - Protective gloves against dangerous chemicals and micro-organisms
EN 16321 - Eye and face protection for occupational use
EN 13034 - Protective clothing against liquid chemicals - Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment)
Council Directive 98/24/EC of 7 April 1998 on the protection of the health and safety of workers from the risks related to chemical agents at work (fourteenth individual Directive within the meaning of Article 16(1) of Directive 89/391/EEC) ( OJ L 131, 5.5.1998, p. 11 ).
7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 3
7.1. Trade name(s), authorisation number and specific composition of each individual product
Trade name(s)
Toilet Bowl Cleaner Lemon
Market area: EU
Authorisation number
EU-0029289-0007 1-3
Common name
IUPAC name
Function
CAS number
EC number
Content (%)
Active chlorine released from sodium hypochlorite
active substance
4,54 % (w/w)
Sodium hypochlorite
Sodium hypochlorite
releaser
7681-52-9
231-668-3
32,87 % (w/w)
Sodium hydroxide
Sodium hydroxide
Non-Active substance
1310-73-2
215-185-5
1 % (w/w)
7.2. Trade name(s), authorisation number and specific composition of each individual product
Trade name(s)
Toilet Bowl Cleaner Pine
Market area: EU
Authorisation number
EU-0029289-0008 1-3
Common name
IUPAC name
Function
CAS number
EC number
Content (%)
Active chlorine released from sodium hypochlorite
active substance
4,54 % (w/w)
Sodium hypochlorite
Sodium hypochlorite
releaser
7681-52-9
231-668-3
32,87 % (w/w)
Sodium hydroxide
Sodium hydroxide
Non-Active substance
1310-73-2
215-185-5
1 % (w/w)
7.3. Trade name(s), authorisation number and specific composition of each individual product
Trade name(s)
Stain and Toilet
Market area: EU
Authorisation number
EU-0029289-0009 1-3
Common name
IUPAC name
Function
CAS number
EC number
Content (%)
Active chlorine released from sodium hypochlorite
active substance
4,28 % (w/w)
Sodium hypochlorite
Sodium hypochlorite
releaser
7681-52-9
231-668-3
31,005 % (w/w)
Sodium hydroxide
Sodium hydroxide
Non-Active substance
1310-73-2
215-185-5
1 % (w/w)
1. META SPC 4 ADMINISTRATIVE INFORMATION
1.1. Meta SPC 4 identifier
Identifier
Meta SPC: Meta SPC D
1.2. Suffix to the authorisation number
Number
1-4
1.3. Product type(s)
Product type(s)
PT02: Disinfectants and algaecides not intended for direct application to humans or animals
2. META SPC 4 COMPOSITION
2.1. Qualitative and quantitative information on the composition of the meta SPC 4
Common name
IUPAC name
Function
CAS number
EC number
Content (%)
Active chlorine released from sodium hypochlorite
active substance
4,33 - 4,33 % (w/w)
Sodium hypochlorite
Sodium hypochlorite
releaser
7681-52-9
231-668-3
31,345 - 31,345 % (w/w)
Sodium hydroxide
Sodium hydroxide
Non-Active substance
1310-73-2
215-185-5
2,5 - 2,5 % (w/w)
2.2. Type(s) of formulation of the meta SPC 4
Formulation type(s)
Ready to use liquid
3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 4
Hazard statements
H290: May be corrosive to metals.
H314: Causes severe skin burns and eye damage.
H410: Very toxic to aquatic life with long lasting effects.
EUH206: Warning! Do not use together with other products. May release dangerous gases (chlorine).
Precautionary statements
P101: If medical advice is needed, have product container or label at hand.
P102: Keep out of reach of children.
P234: Keep only in original packaging.
P264: Wash hands thoroughly after handling.
P273: Avoid release to the environment.
P280: Wear protective gloves/protective clothing/eye protection/face protection..
P301+P330+P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting.
P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P363: Wash contaminated clothing before reuse.
P390: Absorb spillage to prevent material damage.
P391: Collect spillage.
P406: Store in a in a corrosive resistant container with a resistant inner liner.
P103: Read carefully and follow all instructions.
P260: Do not breathe vapours.
P260: Do not breathe spray.
P310: Immediately call a POISON CENTER.
P405: Store locked up.
P501: Dispose of contents in accordance with local/regional regulations.
4. AUTHORISED USE(S) OF THE META SPC
4.1. Use description
Table 1.
Drain pipe surface disinfection
Product type
PT02: Disinfectants and algaecides not intended for direct application to humans or animals
Where relevant, an exact description of the authorised use
-
Target organism(s) (including development stage)
Scientific name: Bacteria
Common name: Bacteria
Development stage: Other
Scientific name: Fungi
Common name: fungi
Development stage: Other
Scientific name: Yeast
Common name: Yeast
Development stage: other
Field(s) of use
indoor use
Indoor (domestic and institutional areas)
Application method(s)
Method: pouring
Detailed description: -
Application rate(s) and frequency
Application rate: -
Ready to use product.
Number and timing of application: once a week maximum
Contact time: Bacteria, yeast and fungi: 15 minutes
Room temperature
Category(ies) of users
professional ; general public (non-professional)
Pack sizes and packaging material
500 mL, 750 mL, 1L opaque HDPE bottles.
Plastic (polypropylene) cap
Plastic insert plug (LDPP)
Plastic (HDPE/polypropylene) cap
Plastic insert nozzle (polypropylene)
CLP regulation apply, as products are classified H314, child proof closure and a tactile warning are required for packaging of non professional users.
4.1.1. Use-specific instructions
See general directions for use.
4.1.2. Use-specific risk mitigation measures
See general directions for use.
4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use.
4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use.
4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use.
5. GENERAL DIRECTIONS FOR USE OF THE META SPC 4
5.1. Instructions for use
—
Comply with the instruction for use.
—
Respect the conditions of use of the product (concentration, contact time, temperature, etc.).
—
The recommended dose is approximately 250 mL which the user is guided to measure based on a proportion of the pack size:
—
For 750 mL: Use sufficient liquid to thoroughly coat the pipe. This may require 1/3rd of the contents.
—
For 500 mL: Carefully uncap and without squeezing the bottle, pour gently ½ bottle of gel into the drain.
—
For 1 L: Carefully uncap and without squeezing the bottle, pour gently ¼ bottle of gel into the drain.
—
Once a week maximum.
—
Product to be applied by the user by placing bottle near to the drain hole and pouring product down the drain.
—
Rinse thoroughly after use.
—
No other cleaning agents should be used in conjunction with the product.
—
Inform the registration holder if the treatment is ineffective.
5.2. Risk mitigation measures
For professional users:
Wear personal protective equipment during application of the products:
—
chemical resistant gloves classified under EN 374 or equivalent ;
—
chemical goggles classified under EN 16321 or equivalent ;
—
protective coverall in accordance with EN 13034 or equivalent;
(material to be specified by the authorisation holder within the product information)
The full texts of the EN standards are available in Section 6
This is without prejudice to the application of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work. See section 6 for the full reference to this act.
For non-professional users:
—
Do not touch the product during application
—
Wash hands after use
—
Avoid contact with skin and eyes.
5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
—
IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor.
—
IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112/ambulance for medical assistance.
—
Information to Healthcare personnel/doctor:
—
The eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid.
—
IF SWALLOWED: Immediately rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call 112/ambulance for medical assistance.
—
IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing.
—
If symptoms: Call 112/ambulance for medical assistance.
—
If no symptoms: Call a POISON CENTRE or a doctor.
—
If medical advice is needed, have product container or label at hand.
5.4. Instructions for safe disposal of the product and its packaging
—
Do not discharge unused product on the ground, into water courses, into pipes (sink, toilets…) nor down the drains.
—
Dispose of unused product, its packaging and all other waste, in accordance with local regulations.
5.5. Conditions of storage and shelf-life of the product under normal conditions of storage
—
Shelf-life: 24 months.
—
Do not store above 30°C.
—
Protect from direct sunlight.
—
Keep out of reach of children and non-target animals/pets.
6. OTHER INFORMATION
The full titles of the EN standards and legal act referenced in section 5.2 “Risk mitigation measures” are:
EN 374 - Protective gloves against dangerous chemicals and micro-organisms
EN 16321 - Eye and face protection for occupational use
EN 13034 - Protective clothing against liquid chemicals - Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment)
Council Directive 98/24/EC of 7 April 1998 on the protection of the health and safety of workers from the risks related to chemical agents at work (fourteenth individual Directive within the meaning of Article 16(1) of Directive 89/391/EEC) ( OJ L 131, 5.5.1998, p. 11 ).
7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 4
7.1. Trade name(s), authorisation number and specific composition of each individual product
Trade name(s)
Liquid Drain Opener
Market area: EU
Authorisation number
EU-0029289-0010 1-4
Common name
IUPAC name
Function
CAS number
EC number
Content (%)
Active chlorine released from sodium hypochlorite
active substance
4,33 % (w/w)
Sodium hypochlorite
Sodium hypochlorite
releaser
7681-52-9
231-668-3
31,345 % (w/w)
Sodium hydroxide
Sodium hydroxide
Non-Active substance
1310-73-2
215-185-5
2,5 % (w/w)
1. META SPC 5 ADMINISTRATIVE INFORMATION
1.1. Meta SPC 5 identifier
Identifier
Meta SPC: Meta SPC E
1.2. Suffix to the authorisation number
Number
1-5
1.3. Product type(s)
Product type(s)
PT02: Disinfectants and algaecides not intended for direct application to humans or animals
2. META SPC 5 COMPOSITION
2.1. Qualitative and quantitative information on the composition of the meta SPC 5
Common name
IUPAC name
Function
CAS number
EC number
Content (%)
Active chlorine released from sodium hypochlorite
active substance
1,87 - 1,87 % (w/w)
Sodium hypochlorite
Sodium hypochlorite
releaser
7681-52-9
231-668-3
13,52 - 13,52 % (w/w)
Sodium hydroxide
Sodium hydroxide
Non-Active substance
1310-73-2
215-185-5
1 - 1 % (w/w)
2.2. Type(s) of formulation of the meta SPC 5
Formulation type(s)
Ready to use liquid
3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 5
Hazard statements
H290: May be corrosive to metals.
H314: Causes severe skin burns and eye damage.
H412: Harmful to aquatic life with long lasting effects.
EUH206: Warning! Do not use together with other products. May release dangerous gases (chlorine).
Precautionary statements
P101: If medical advice is needed, have product container or label at hand.
P102: Keep out of reach of children.
P234: Keep only in original packaging.
P264: Wash hands thoroughly after handling.
P273: Avoid release to the environment.
P280: Wear protective gloves/protective clothing/eye protection/face protection..
P301+P330+P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting.
P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P363: Wash contaminated clothing before reuse.
P390: Absorb spillage to prevent material damage.
P406: Store in a corrosive resistant container with a resistant inner liner.
P103: Read carefully and follow all instructions.
P260: Do not breathe vapours.
P260: Do not breathe spray.
P310: Immediately call a POISON CENTER.
P405: Store locked up.
P501: Dispose of contents in accordance with local/regional regulations.
P501: Dispose of container in accordance with local/regional regulations.
4. AUTHORISED USE(S) OF THE META SPC
4.1. Use description
Table 1.
Drain pipe surface disinfection
Product type
PT02: Disinfectants and algaecides not intended for direct application to humans or animals
Where relevant, an exact description of the authorised use
-
Target organism(s) (including development stage)
Scientific name: Bacteria
Common name: Bacteria
Development stage: Other
Scientific name: Fungi
Common name: fungi
Development stage: Other
Scientific name: Yeast
Common name: Yeast
Development stage: other
Field(s) of use
indoor use
Indoor (domestic and institutional areas)
Application method(s)
Method: pouring
Detailed description: -
Application rate(s) and frequency
Application rate: -
Ready to use product.
Number and timing of application: once a week maximum
Contact time: Bacteria, yeast and fungi: 15 minutes
Room temperature
Category(ies) of users
professional ; general public (non-professional)
Pack sizes and packaging material
500 mL, 750 mL, 1L, 1.5L, 2L opaque HDPE bottles. Plastic (polypropylene) cap, Plastic insert plug (LDPP).
CLP regulation apply, as products are classified H314, child proof closure and a tactile warning are required for packaging of non professional users.
4.1.1. Use-specific instructions
See general directions for use.
4.1.2. Use-specific risk mitigation measures
See general directions for use.
4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use.
4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use.
4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use.
5. GENERAL DIRECTIONS FOR USE OF THE META SPC 5
5.1. Instructions for use
—
Comply with the instruction for use.
—
Respect the conditions of use of the product (concentration, contact time, temperature, etc.).
—
The recommended dose is approximately 125 mL which the user is guided to measure based on a proportion of the pack size:
—
For 750 mL (without bottle handle): Carefully squeeze bottle to apply the liquid directly into the drain until all surfaces are covered (approximately. 125 mL).
—
For 500 mL, 750 mL, 1 L, 1.5 L & 2 L (bottle with handle): Carefully uncap and without squeezing the bottle, carefully pour the gel into the drain until all surfaces are covered (approximately 125 mL).
—
Once a week maximum.
—
Product to be applied by the user by placing bottle near to the drain hole and pouring product down the drain.
—
Rinse thoroughly after use.
—
Products should not be used in conjunction with acids or ammonia
—
Inform the registration holder if the treatment is ineffective.
5.2. Risk mitigation measures
For professional users:
Wear personal protective equipment during application of the products:
—
chemical resistant gloves classified under EN 374 or equivalent;
—
chemical goggles classified under EN 16321 or equivalent ;
—
protective coverall in accordance with EN 13034 or equivalent;
(material to be specified by the authorisation holder within the product information)
The full texts of the EN standards are available in Section 6
This is without prejudice to the application of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work. See section 6 for the full reference to this act.
For non-professional users:
—
Do not touch the product during application
—
Wash hand after use
—
Avoid contact with skin and eyes
5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
—
IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor.
—
IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112/ambulance for medical assistance.
—
Information to Healthcare personnel/doctor:
—
The eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid.
—
IF SWALLOWED: Immediately rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call 112/ambulance for medical assistance.
—
IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing.
—
If symptoms: Call 112/ambulance for medical assistance.
—
If no symptoms: Call a POISON CENTRE or a doctor.
—
If medical advice is needed, have product container or label at hand.
5.4. Instructions for safe disposal of the product and its packaging
—
Do not discharge unused product on the ground, into water courses, into pipes (sink, toilets…) nor down the drains.
—
Dispose of unused product, its packaging and all other waste, in accordance with local regulations.
5.5. Conditions of storage and shelf-life of the product under normal conditions of storage
—
Shelf-life: 24 months.
—
Do not store above 30°C.
—
Protect from direct sunlight.
—
Keep out of reach of children and non-target animals/pets.
6. OTHER INFORMATION
The full titles of the EN standards and legal act referenced in section 5.2 “Risk mitigation measures” are:
EN 374 - Protective gloves against dangerous chemicals and micro-organisms
EN 16321 - Eye and face protection for occupational use
EN 13034 - Protective clothing against liquid chemicals - Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment)
Council Directive 98/24/EC of 7 April 1998 on the protection of the health and safety of workers from the risks related to chemical agents at work (fourteenth individual Directive within the meaning of Article 16(1) of Directive 89/391/EEC) ( OJ L 131, 5.5.1998, p. 11 ).
7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 5
7.1. Trade name(s), authorisation number and specific composition of each individual product
Trade name(s)
Bleach Maintainer
Market area: EU
Authorisation number
EU-0029289-0011 1-5
Common name
IUPAC name
Function
CAS number
EC number
Content (%)
Active chlorine released from sodium hypochlorite
active substance
1,87 % (w/w)
Sodium hypochlorite
Sodium hypochlorite
releaser
7681-52-9
231-668-3
13,52 % (w/w)
Sodium hydroxide
Sodium hydroxide
Non-Active substance
1310-73-2
215-185-5
1 % (w/w)
1. META SPC 6 ADMINISTRATIVE INFORMATION
1.1. Meta SPC 6 identifier
Identifier
Meta SPC: Meta SPC F
1.2. Suffix to the authorisation number
Number
1-6
1.3. Product type(s)
Product type(s)
PT04: Food and feed area
PT02: Disinfectants and algaecides not intended for direct application to humans or animals
2. META SPC 6 COMPOSITION
2.1. Qualitative and quantitative information on the composition of the meta SPC 6
Common name
IUPAC name
Function
CAS number
EC number
Content (%)
Active chlorine released from sodium hypochlorite
active substance
0,94 - 0,94 % (w/w)
Sodium hypochlorite
Sodium hypochlorite
releaser
7681-52-9
231-668-3
6,83 - 6,83 % (w/w)
Sodium hydroxide
Sodium hydroxide
Non-Active substance
1310-73-2
215-185-5
0,15 - 0,2 % (w/w)
Amines, C12-14 (even numbered)-alkyldimethyl, N-oxides
Amines, C12-14 (even numbered)-alkyldimethyl, N-oxides
Non-Active substance
308062-28-4
931-292-6
0,14 - 0,14 % (w/w)
2.2. Type(s) of formulation of the meta SPC 6
Formulation type(s)
Ready to use liquid
3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 6
Hazard statements
H290: May be corrosive to metals.
H315: Causes skin irritation.
H319: Causes serious eye irritation.
H412: Harmful to aquatic life with long lasting effects.
Precautionary statements
P101: If medical advice is needed, have product container or label at hand.
P102: Keep out of reach of children.
P234: Keep only in original packaging.
P264: Wash hands thoroughly after handling.
P273: Avoid release to the environment.
P280: Wear protective gloves/protective clothing/eye protection/face protection..
P302+P352: IF ON SKIN: Wash with plenty of soap and water.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+P313: If eye irritation persists: Get medical advice.
P390: Absorb spillage to prevent material damage.
P406: Store in a corrosive resistant container with a resistant inner liner.
P103: Read carefully and follow all instructions.
P332+P313: If skin irritation occurs: Get medical advice.
P362+P364: Take off contaminated clothing and wash it before reuse.
P310: Immediately call a POISON CENTER.
P501: Dispose of contents in accordance with local/regional regulations.
P501: Dispose of container in accordance with local/regional regulations.
4. AUTHORISED USE(S) OF THE META SPC
4.1. Use description
Table 1.
Hard non porous surface disinfection
Product type
PT02: Disinfectants and algaecides not intended for direct application to humans or animals
Where relevant, an exact description of the authorised use
-
Target organism(s) (including development stage)
Scientific name: Bacteria
Common name: Bacteria
Development stage: Other
Scientific name: Fungi
Common name: fungi
Development stage: Other
Scientific name: Yeast
Common name: Yeast
Development stage: Other
Field(s) of use
indoor use
Indoor (domestic and institutional areas)
Application method(s)
Method: spraying
Detailed description: -
Application rate(s) and frequency
Application rate: -
Ready to use product.
Number and timing of application: -
Contact time: Bacteria, yeast and fungi: 5 minutes
Room temperature
Category(ies) of users
professional ; general public (non-professional)
Pack sizes and packaging material
500 mL, 750 mL, 1L opaque HDPE bottles with TS6 spray trigger or TS6 foam trigger
4.1.1. Use-specific instructions
See general directions for use.
4.1.2. Use-specific risk mitigation measures
For non-professional users:
—
Product shall be sprayed downward
—
Wash hands after use
—
Avoid contact with skin and eyes
For secondary exposure of general public:
—
It shall be ensured that bystanders and general public do not touch the surface until the surface is rinsed and dry.
4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use.
4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use.
4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use.
4.2. Use description
Table 2.
Hard non porous surface disinfection
Product type
PT04: Food and feed area
Target organism(s) (including development stage)
Scientific name: Bacteria
Common name: Bacteria
Development stage: Other
Scientific name: Fungi
Common name: fungi
Development stage: Other
Scientific name: Yeast
Common name: Yeast
Development stage: Other
Field(s) of use
indoor use
Indoor (domestic and institutional areas)
Application method(s)
Method: spraying
Detailed description: -
Application rate(s) and frequency
Application rate: -
Ready to use product.
Number and timing of application: -
Contact time: Bacteria, yeast and fungi: 5 minutes
Room temperature
Category(ies) of users
professional
Pack sizes and packaging material
500 mL, 750 mL, 1L opaque HDPE bottles with TS6 spray trigger or TS6 foam trigger
4.2.1. Use-specific instructions
See general directions for use.
4.2.2. Use-specific risk mitigation measures
See general directions for use.
For food commodities, ensure that the concentration of chlorate present in food does not exceed the MRL values set in Regulation 2020/749. See section 6 for the full reference to this act.
4.2.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use.
4.2.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use.
4.2.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use.
5. GENERAL DIRECTIONS FOR USE OF THE META SPC 6
5.1. Instructions for use
—
Comply with the instruction for use. Respect the conditions of use of the product (concentration, contact time, temperature, etc.).
—
Ensure complete wetting on the surfaces, leave for appropriate contact time.
—
Product to be applied to hard surfaces by spraying. The nozzle of the product should be turned to the ‘
‘on’
’ position. Users are advised to spray product 20-25 cm away from surfaces.
—
Rinse treated surfaces after application.
—
Products should not be used in conjunction with acids or ammonia.
—
Inform the registration holder if the treatment is ineffective.
5.2. Risk mitigation measures
For professional users:
Wear personal protective equipment during application and post-application of the products:
—
chemical resistant gloves classified under EN 374 or equivalent;
—
chemical googles classified under EN 16321 or equivalent;
—
protective coverall in accordance with EN 13034 or equivalent.
(material to be specified by the authorisation holder within the product information)
The full texts of the EN standards are available in Section 6
This is without prejudice to the application of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work. See section 6 for the full reference to this act.
5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
—
IF ON SKIN: Take off all contaminated clothing and wash it before reuse. Wash skin with water. If skin irritation occurs: Get medical advice.
—
IF IN EYES: Rinse with water. Remove contact lenses, if present and easy to do. Continue rinsing for 5 minutes. Call a POISON CENTRE or a doctor.
—
IF SWALLOWED: Rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call a POISON CENTRE or a doctor.
—
IF INHALED: If symptoms occur call a POISON CENTRE or a doctor.
—
If medical advice is needed, have product container or label at hand.
5.4. Instructions for safe disposal of the product and its packaging
—
Do not discharge unused product on the ground, into water courses, into pipes (sink, toilets…) nor down the drains.
—
Dispose of unused product, its packaging and all other waste, in accordance with local regulations.
5.5. Conditions of storage and shelf-life of the product under normal conditions of storage
—
Shelf-life: 24 months.
—
Do not store above 30°C.
—
Protect from direct sunlight.
—
Keep out of reach of children and non-target animals/pets.
6. OTHER INFORMATION
The full titles of the EN standards and legal act referenced in section 5.2 “Risk mitigation measures” are:
EN 374 - Protective gloves against dangerous chemicals and micro-organisms
EN 16321 - Eye and face protection for occupational use
EN 13034 - Protective clothing against liquid chemicals - Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment)
Council Directive 98/24/EC of 7 April 1998 on the protection of the health and safety of workers from the risks related to chemical agents at work (fourteenth individual Directive within the meaning of Article 16(1) of Directive 89/391/EEC) ( OJ L 131, 5.5.1998, p. 11 ).
The full title of the legal act mentioned in Section 4.2.2 ‘Use-specific risk mitigation measures’ is:
Commission Regulation (EU) 2020/749 of 4 June 2020 amending Annex III to Regulation (EC) No 396/2005 of the European Parliament and of the Council as regards maximum residue levels for chlorate in or on certain products ( OJ L 178, 8.6.2020, p. 7–20 ).
7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 6
7.1. Trade name(s), authorisation number and specific composition of each individual product
Trade name(s)
Mould & Mildew Remover 1
Market area: EU
Authorisation number
EU-0029289-0012 1-6
Common name
IUPAC name
Function
CAS number
EC number
Content (%)
Active chlorine released from sodium hypochlorite
active substance
0,94 % (w/w)
Sodium hypochlorite
Sodium hypochlorite
releaser
7681-52-9
231-668-3
6,83 % (w/w)
Sodium hydroxide
Sodium hydroxide
Non-Active substance
1310-73-2
215-185-5
0,2 % (w/w)
Amines, C12-14 (even numbered)-alkyldimethyl, N-oxides
Amines, C12-14 (even numbered)-alkyldimethyl, N-oxides
Non-Active substance
308062-28-4
931-292-6
0,14 % (w/w)
7.2. Trade name(s), authorisation number and specific composition of each individual product
Trade name(s)
Mould & Mildew Remover 2
Market area: EU
Authorisation number
EU-0029289-0013 1-6
Common name
IUPAC name
Function
CAS number
EC number
Content (%)
Active chlorine released from sodium hypochlorite
active substance
0,94 % (w/w)
Sodium hypochlorite
Sodium hypochlorite
releaser
7681-52-9
231-668-3
6,83 % (w/w)
Sodium hydroxide
Sodium hydroxide
Non-Active substance
1310-73-2
215-185-5
0,15 % (w/w)
Amines, C12-14 (even numbered)-alkyldimethyl, N-oxides
Amines, C12-14 (even numbered)-alkyldimethyl, N-oxides
Non-Active substance
308062-28-4
931-292-6
0,14 % (w/w)
7.3. Trade name(s), authorisation number and specific composition of each individual product
Trade name(s)
Mould & Mildew Remover 3
Market area: EU
Authorisation number
EU-0029289-0014 1-6
Common name
IUPAC name
Function
CAS number
EC number
Content (%)
Active chlorine released from sodium hypochlorite
active substance
0,94 % (w/w)
Sodium hypochlorite
Sodium hypochlorite
releaser
7681-52-9
231-668-3
6,83 % (w/w)
Sodium hydroxide
Sodium hydroxide
Non-Active substance
1310-73-2
215-185-5
0,15 % (w/w)
Amines, C12-14 (even numbered)-alkyldimethyl, N-oxides
Amines, C12-14 (even numbered)-alkyldimethyl, N-oxides
Non-Active substance
308062-28-4
931-292-6
0,14 % (w/w)
1. META SPC 7 ADMINISTRATIVE INFORMATION
1.1. Meta SPC 7 identifier
Identifier
Meta SPC: Meta SPC G
1.2. Suffix to the authorisation number
Number
1-7
1.3. Product type(s)
Product type(s)
PT02: Disinfectants and algaecides not intended for direct application to humans or animals
PT04: Food and feed area
2. META SPC 7 COMPOSITION
2.1. Qualitative and quantitative information on the composition of the meta SPC 7
Common name
IUPAC name
Function
CAS number
EC number
Content (%)
Active chlorine released from sodium hypochlorite
active substance
2,46 - 2,46 % (w/w)
Sodium hypochlorite
Sodium hypochlorite
releaser
7681-52-9
231-668-3
17,79 - 17,79 % (w/w)
Sodium hydroxide
Sodium hydroxide
Non-Active substance
1310-73-2
215-185-5
0,2 - 0,2 % (w/w)
2.2. Type(s) of formulation of the meta SPC 7
Formulation type(s)
Ready to use liquid
3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 7
Hazard statements
H290: May be corrosive to metals.
H314: Causes severe skin burns and eye damage.
H410: Very toxic to aquatic life with long lasting effects.
EUH071: Corrosive to the respiratory tract.
Precautionary statements
P234: Keep only in original packaging.
P273: Avoid release to the environment.
P280: Wear protective gloves/protective clothing/eye protection/face protection..
P301+P330+P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting.
P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P363: Wash contaminated clothing before reuse.
P390: Absorb spillage to prevent material damage.
P406: Store in a corrosive resistant container with a resistant inner liner.
P260: Do not breathe vapours.
P260: Do not breathe spray.
P310: Immediately call a POISON CENTER.
P405: Store locked up.
P501: Dispose of contents in accordance with local/regional regulations.
P501: Dispose of container in accordance with local/regional regulations.
4. AUTHORISED USE(S) OF THE META SPC
4.1. Use description
Table 1.
Hard non porous surface disinfection
Product type
PT02: Disinfectants and algaecides not intended for direct application to humans or animals
PT04: Food and feed area
Where relevant, an exact description of the authorised use
-
Target organism(s) (including development stage)
Scientific name: bacteria
Common name: Bacteria
Development stage: Other
Scientific name: Fungi
Common name: fungi
Development stage: Other
Scientific name: Yeast
Common name: Yeast
Development stage: Other
Scientific name: Virus
Common name: Virus
Development stage: Other
Field(s) of use
indoor use
Indoor (domestic, institutional and medical areas)
Application method(s)
Method: spraying
Detailed description: -
Application rate(s) and frequency
Application rate: -
Ready to use product.
Number and timing of application: -
Bacteria, yeast, fungi and virus: 5 min
Room temperature
Category(ies) of users
professional
Pack sizes and packaging material
500 mL, 750 mL, 1L opaque HDPE bottles with TS6 spray trigger or TS6 foam trigger.
4.1.1. Use-specific instructions
See general directions for use.
4.1.2. Use-specific risk mitigation measures
See general directions for use.
PT4: For food commodities, ensure that the concentration of chlorate present in food does not exceed the MRL values set in Regulation 2020/749. See section 6 for the full reference to this act.
4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use.
4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use.
4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use.
5. GENERAL DIRECTIONS FOR USE OF THE META SPC 7
5.1. Instructions for use
—
Comply with the instruction for use.
—
For healthcare settings: clean carefully the surfaces before application of the product.
—
Respect the conditions of use of the product (concentration, contact time, temperature, etc.).
—
Ensure complete wetting on the surfaces, leave for appropriate contact time.
—
Product to be applied to hard surfaces by spraying. The nozzle of the product should be turned to the ‘
‘on’
’ position. Users are advised to spray product 20-25cm away from surfaces, whilst keeping product upright.
—
Rinse treated surfaces after application.
—
Products should not be used in conjunction with acids or ammonia.
—
Inform the registration holder if the treatment is ineffective.
5.2. Risk mitigation measures
For professional users:
Wear personal protective equipment during application and post-application of the products:
—
chemical resistant gloves classified under EN 374 or equivalent ;
—
chemical goggles classified under EN 16321 or equivalent ;
—
protective coverall in accordance with EN 13034 or equivalent;
(material to be specified by the authorisation holder within the product information)
—
Respiratory protective equipment (only during spraying) in accordance with EN 14387 or equivalent
The full texts of the EN standards are available in Section 6
This is without prejudice to the application of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work. See section 6 for the full reference to this act.
For the bystander:
—
Do not be present in the treatment area during application by spraying. If it is necessary to be present, wear same RPE and PPE as the user.
—
For secondary exposure of general public:
—
By-standers shall not be present during application by spraying
—
It shall be ensured that bystanders and general public do not touch the surface until the surface is rinsed and dry.
5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
—
IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor.
—
IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112/ambulance for medical assistance.
—
Information to Healthcare personnel/doctor:
—
The eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid.
—
IF SWALLOWED: Immediately rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call 112/ambulance for medical assistance.
—
IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing.
—
If symptoms: Call 112/ambulance for medical assistance.
—
If no symptoms: Call a POISON CENTRE or a doctor.
—
Keep the container or label available.
5.4. Instructions for safe disposal of the product and its packaging
—
Do not discharge unused product on the ground, into water courses, into pipes (sink, toilets…) nor down the drains.
—
Dispose of unused product, its packaging and all other waste, in accordance with local regulations.
5.5. Conditions of storage and shelf-life of the product under normal conditions of storage
—
Shelf-life: 24 months.
—
Do not store above 30°C.
—
Protect from direct sunlight.
6. OTHER INFORMATION
The full titles of the EN standards and legal act referenced in section 5.2 “Risk mitigation measures” are:
EN 374 - Protective gloves against dangerous chemicals and micro-organisms
EN 16321 - Eye and face protection for occupational use
EN 13034 - Protective clothing against liquid chemicals - Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment)
EN 14387 - Respiratory protective devices - Gas filter(s) and combined filter(s)- Requirements, testing, marking
Council Directive 98/24/EC of 7 April 1998 on the protection of the health and safety of workers from the risks related to chemical agents at work (fourteenth individual Directive within the meaning of Article 16(1) of Directive 89/391/EEC) ( OJ L 131, 5.5.1998, p. 11 ).
Commission Regulation (EU) 2020/749 of 4 June 2020 amending Annex III to Regulation (EC) No 396/2005 of the European Parliament and of the Council as regards maximum residue levels for chlorate in or on certain products ( OJ L 178, 8.6.2020, p. 7–20 ).
7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 7
7.1. Trade name(s), authorisation number and specific composition of each individual product
Trade name(s)
Anti-bacterial Mould & Mildew Remover 1
Market area: EU
Authorisation number
EU-0029289-0015 1-7
Common name
IUPAC name
Function
CAS number
EC number
Content (%)
Active chlorine released from sodium hypochlorite
active substance
2,46 % (w/w)
Sodium hypochlorite
Sodium hypochlorite
releaser
7681-52-9
231-668-3
17,79 % (w/w)
Sodium hydroxide
Sodium hydroxide
Non-Active substance
1310-73-2
215-185-5
0,2 % (w/w)
7.2. Trade name(s), authorisation number and specific composition of each individual product
Trade name(s)
Anti-bacterial Mould & Mildew Remover 2
Market area: EU
Authorisation number
EU-0029289-0016 1-7
Common name
IUPAC name
Function
CAS number
EC number
Content (%)
Active chlorine released from sodium hypochlorite
active substance
2,46 % (w/w)
Sodium hypochlorite
Sodium hypochlorite
releaser
7681-52-9
231-668-3
17,79 % (w/w)
Sodium hydroxide
Sodium hydroxide
Non-Active substance
1310-73-2
215-185-5
0,2 % (w/w)
7.3. Trade name(s), authorisation number and specific composition of each individual product
Trade name(s)
Black Mould Remover 1
Market area: EU
Authorisation number
EU-0029289-0017 1-7
Common name
IUPAC name
Function
CAS number
EC number
Content (%)
Active chlorine released from sodium hypochlorite
active substance
2,46 % (w/w)
Sodium hypochlorite
Sodium hypochlorite
releaser
7681-52-9
231-668-3
17,79 % (w/w)
Sodium hydroxide
Sodium hydroxide
Non-Active substance
1310-73-2
215-185-5
0,2 % (w/w)
1. META SPC 8 ADMINISTRATIVE INFORMATION
1.1. Meta SPC 8 identifier
Identifier
Meta SPC: Meta SPC H
1.2. Suffix to the authorisation number
Number
1-8
1.3. Product type(s)
Product type(s)
PT04: Food and feed area
PT02: Disinfectants and algaecides not intended for direct application to humans or animals
2. META SPC 8 COMPOSITION
2.1. Qualitative and quantitative information on the composition of the meta SPC 8
Common name
IUPAC name
Function
CAS number
EC number
Content (%)
Active chlorine released from sodium hypochlorite
active substance
2,09 - 2,09 % (w/w)
Sodium hypochlorite
Sodium hypochlorite
releaser
7681-52-9
231-668-3
15,1 - 15,1 % (w/w)
Sodium hydroxide
Sodium hydroxide
Non-Active substance
1310-73-2
215-185-5
0,1 - 0,1 % (w/w)
2.2. Type(s) of formulation of the meta SPC 8
Formulation type(s)
Ready to use liquid
3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 8
Hazard statements
H290: May be corrosive to metals.
H315: Causes skin irritation.
H319: Causes serious eye irritation.
H412: Harmful to aquatic life with long lasting effects.
EUH206: Warning! Do not use together with other products. May release dangerous gases (chlorine).
Precautionary statements
P101: If medical advice is needed, have product container or label at hand.
P102: Keep out of reach of children.
P234: Keep only in original packaging.
P264: Wash hands thoroughly after handling.
P273: Avoid release to the environment.
P280: Wear protective gloves/protective clothing/eye protection/face protection..
P302+P352: IF ON SKIN: Wash with plenty of soap and water.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+P313: If eye irritation persists: Get medical advice.
P390: Absorb spillage to prevent material damage.
P406: Store in a corrosive resistant container with a resistant inner liner.
P103: Read carefully and follow all instructions.
P332+P313: If skin irritation occurs: Get medical advice.
P362+P364: Take off contaminated clothing and wash it before reuse.
P310: Immediately call a POISON CENTER.
P501: Dispose of contents in accordance with local/regional regulations.
P501: Dispose of container in accordance with local/regional regulations.
4. AUTHORISED USE(S) OF THE META SPC
4.1. Use description
Table 1.
Hard non porous surface disinfection
Product type
PT02: Disinfectants and algaecides not intended for direct application to humans or animals
Where relevant, an exact description of the authorised use
-
Target organism(s) (including development stage)
Scientific name: Bacteria
Common name: Bacteria
Development stage: Other
Scientific name: Yeast
Common name: Yeast
Development stage: Other
Scientific name: Fungi
Common name: fungi
Development stage: Other
Scientific name: Virus
Common name: Virus
Development stage: Virus
Field(s) of use
indoor use
Indoor (domestic, institutional and medical areas)
Application method(s)
Method: spraying
Detailed description: -
Application rate(s) and frequency
Application rate: -
Ready to use product.
Number and timing of application: -
Contact time: Bacteria, yeast, fungi and virus: 5 min
Room temperature
Category(ies) of users
professional ; general public (non-professional)
Pack sizes and packaging material
500 mL, 750 mL, 1L opaque HDPE bottles with TS6 spray trigger or TS6 foam trigger.
4.1.1. Use-specific instructions
See general directions for use.
4.1.2. Use-specific risk mitigation measures
For non-professional users:
—
Product shall be sprayed downward
—
Wash hand after use
—
Avoid contact with skin and eyes
For secondary exposure of general public:
—
It shall be ensured that bystanders and general public do not touch the surface until the surface is rinsed and dry.
4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use.
4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use.
4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use.
4.2. Use description
Table 2.
Hard non porous surface disinfection
Product type
PT04: Food and feed area
Target organism(s) (including development stage)
Scientific name: Bacteria
Common name: Bacteria
Development stage: Other
Scientific name: Yeast
Common name: Yeast
Development stage: Other
Scientific name: Fungi
Common name: fungi
Development stage: Other
Scientific name: Virus
Common name: Virus
Development stage: Virus
Field(s) of use
indoor use
Indoor (domestic, institutional and medical areas)
Application method(s)
Method: spraying
Detailed description: -
Application rate(s) and frequency
Application rate: -
Ready to use product.
Number and timing of application: -
Contact time: Bacteria, yeast, fungi and virus: 5 min
Room temperature
Category(ies) of users
professional
Pack sizes and packaging material
500 mL, 750 mL, 1L opaque HDPE bottles with TS6 spray trigger or TS6 foam trigger.
4.2.1. Use-specific instructions
See general directions for use.
4.2.2. Use-specific risk mitigation measures
See general directions for use.
For food commodities, ensure that the concentration of chlorate present in food does not exceed the MRL values set in Regulation 2020/749. See section 6 for the full reference to this act.
4.2.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use.
4.2.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use.
4.2.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use.
5. GENERAL DIRECTIONS FOR USE OF THE META SPC 8
5.1. Instructions for use
—
Comply with the instruction for use.
—
For healthcare settings: clean carefully the surfaces before application of the product.
—
Respect the conditions of use of the product (concentration, contact time, temperature, etc.).
—
Ensure complete wetting on the surfaces, leave for appropriate contact time.
—
Product is to be applied by spraying. The nozzle of the product should be turned to the ‘on’ position. Users are advised to spray product 20-25cm away from surfaces.
—
Rinse treated surfaces after application.
—
Products should not be used in conjunction with acids or ammonia.
—
Inform the registration holder if the treatment is ineffective.
5.2. Risk mitigation measures
For professional users:
Wear personal protective equipment during application and post-application of the products:
—
chemical resistant gloves classified under EN 374 or equivalent ;
—
chemical goggles classified under EN 16321 or equivalent ;
—
protective coverall in accordance with EN 13034 or equivalent;
(material to be specified by the authorisation holder within the product information)
The full texts of the EN standards are available in Section 6
This is without prejudice to the application of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work. See section 6 for the full reference to this act.
5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
—
IF ON SKIN: Take off all contaminated clothing and wash it before reuse. Wash skin with water. If skin irritation occurs: Get medical advice.
—
IF IN EYES: Rinse with water. Remove contact lenses, if present and easy to do. Continue rinsing for 5 minutes. Call a POISON CENTRE or a doctor.
—
IF SWALLOWED: Rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call a POISON CENTRE or a doctor.
—
IF INHALED: If symptoms occur call a POISON CENTRE or a doctor.
—
If medical advice is needed, have product container or label at hand.
5.4. Instructions for safe disposal of the product and its packaging
—
Do not discharge unused product on the ground, into water courses, into pipes (sink, toilets…) nor down the drains.
—
Dispose of unused product, its packaging and all other waste, in accordance with local regulations.
5.5. Conditions of storage and shelf-life of the product under normal conditions of storage
—
Shelf-life: 24 months.
—
Do not store above 30°C.
—
Protect from direct sunlight.
—
Keep out of reach of children and non-target animals/pets.
6. OTHER INFORMATION
The full titles of the EN standards and legal act referenced in section 5.2 “Risk mitigation measures” are:
EN 374 - Protective gloves against dangerous chemicals and micro-organisms
EN 16321 - Eye and face protection for occupational use
EN 13034 - Protective clothing against liquid chemicals - Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment)
Council Directive 98/24/EC of 7 April 1998 on the protection of the health and safety of workers from the risks related to chemical agents at work (fourteenth individual Directive within the meaning of Article 16(1) of Directive 89/391/EEC) ( OJ L 131, 5.5.1998, p. 11 ).
The full title of the legal act mentioned in Section 4.2.2 ‘Use-specific risk mitigation measures’ is:
Commission Regulation (EU) 2020/749 of 4 June 2020 amending Annex III to Regulation (EC) No 396/2005 of the European Parliament and of the Council as regards maximum residue levels for chlorate in or on certain products ( OJ L 178, 8.6.2020, p. 7–20 ).
7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 8
7.1. Trade name(s), authorisation number and specific composition of each individual product
Trade name(s)
Black Mould remover 2
Market area: EU
Authorisation number
EU-0029289-0018 1-8
Common name
IUPAC name
Function
CAS number
EC number
Content (%)
Active chlorine released from sodium hypochlorite
active substance
2,09 % (w/w)
Sodium hypochlorite
Sodium hypochlorite
releaser
7681-52-9
231-668-3
15,1 % (w/w)
Sodium hydroxide
Sodium hydroxide
Non-Active substance
1310-73-2
215-185-5
0,1 % (w/w)
7.2. Trade name(s), authorisation number and specific composition of each individual product
Trade name(s)
Bleach & Hygiene
Market area: EU
Authorisation number
EU-0029289-0019 1-8
Common name
IUPAC name
Function
CAS number
EC number
Content (%)
Active chlorine released from sodium hypochlorite
active substance
2,09 % (w/w)
Sodium hypochlorite
Sodium hypochlorite
releaser
7681-52-9
231-668-3
15,1 % (w/w)
Sodium hydroxide
Sodium hydroxide
Non-Active substance
1310-73-2
215-185-5
0,1 % (w/w)
7.3. Trade name(s), authorisation number and specific composition of each individual product
Trade name(s)
Anti-bacterial Mould & Mildew Remover 3
Market area: EU
Authorisation number
EU-0029289-0020 1-8
Common name
IUPAC name
Function
CAS number
EC number
Content (%)
Active chlorine released from sodium hypochlorite
active substance
2,09 % (w/w)
Sodium hypochlorite
Sodium hypochlorite
releaser
7681-52-9
231-668-3
15,1 % (w/w)
Sodium hydroxide
Sodium hydroxide
Non-Active substance
1310-73-2
215-185-5
0,1 % (w/w)
1. META SPC 9 ADMINISTRATIVE INFORMATION
1.1. Meta SPC 9 identifier
Identifier
Meta SPC: Meta SPC I
1.2. Suffix to the authorisation number
Number
1-9
1.3. Product type(s)
Product type(s)
PT02: Disinfectants and algaecides not intended for direct application to humans or animals
2. META SPC 9 COMPOSITION
2.1. Qualitative and quantitative information on the composition of the meta SPC 9
Common name
IUPAC name
Function
CAS number
EC number
Content (%)
Active chlorine released from sodium hypochlorite
active substance
5,81 - 5,81 % (w/w)
Sodium hypochlorite
Sodium hypochlorite
releaser
7681-52-9
231-668-3
42,07 - 42,07 % (w/w)
Sodium hydroxide
Sodium hydroxide
Non-Active substance
1310-73-2
215-185-5
1 - 2 % (w/w)
2.2. Type(s) of formulation of the meta SPC 9
Formulation type(s)
Ready to use liquid
3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 9
Hazard statements
H290: May be corrosive to metals.
H314: Causes severe skin burns and eye damage.
H410: Very toxic to aquatic life with long lasting effects.
EUH031: Contact with acids liberates toxic gas.
EUH206: Warning! Do not use together with other products. May release dangerous gases (chlorine).
Precautionary statements
P101: If medical advice is needed, have product container or label at hand.
P102: Keep out of reach of children.
P234: Keep only in original packaging.
P264: Wash hands thoroughly after handling.
P273: Avoid release to the environment.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P301+P330+P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting.
P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P363: Wash contaminated clothing before reuse.
P390: Absorb spillage to prevent material damage.
P391: Collect spillage.
P406: Store in a corrosive resistant container with a resistant inner liner.
P103: Read carefully and follow all instructions.
P260: Do not breathe vapours.
P260: Do not breathe spray.
P310: Immediately call a POISON CENTER.
P405: Store locked up.
P501: Dispose of contents in accordance with local/regional regulations.
P501: Dispose of container in accordance with local/regional regulations.
4. AUTHORISED USE(S) OF THE META SPC
4.1. Use description
Table 1.
Toilet bowl disinfection
Product type
PT02: Disinfectants and algaecides not intended for direct application to humans or animals
Where relevant, an exact description of the authorised use
-
Target organism(s) (including development stage)
Scientific name: Bacteria
Common name: Bacteria
Development stage: Other
Scientific name: Fungi
Common name: fungi
Development stage: Other
Scientific name: Yeast
Common name: Yeast
Development stage: other
Field(s) of use
indoor use
Indoor (domestic, institutional and medical areas)
Application method(s)
Method: pouring
Detailed description: -
Application rate(s) and frequency
Application rate: 80 ml/toilet bowl
Ready to use product.
Number and timing of application: -
Contact time: Bacteria, yeast and fungi: 15 minutes
Room temperature
Category(ies) of users
professional ; general public (non-professional)
Pack sizes and packaging material
500 mL, 680 mL, 700 mL, 750 mL opaque HDPE bottles. Plastic (polypropylene) cap. Plastic insert plug and bent bottle neck (LDPP).
CLP regulation apply, as products are classified H314, child proof closure and a tactile warning are required for packaging of non professional users.
4.1.1. Use-specific instructions
See general directions for use.
4.1.2. Use-specific risk mitigation measures
See general directions for use.
4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use.
4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use.
4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use.
5. GENERAL DIRECTIONS FOR USE OF THE META SPC 9
5.1. Instructions for use
—
Comply with the instruction for use.
—
For healthcare settings: clean carefully the surfaces before application of the product.
—
Respect the conditions of use of the product (concentration, contact time, temperature, etc.).
—
Squeeze and apply slowly all around the inside of the bowl, allowing enough liquid to cover the bowl completely.
—
The recommended dose is approximately 80 mL.
—
Products should not be used in conjunction with acids or ammonia.
—
No other cleaning agents should be used in conjunction with the product.
—
Inform the registration holder if the treatment is ineffective.
5.2. Risk mitigation measures
For professional users:
Wear personal protective equipment during application of the products:
—
chemical resistant gloves classified under EN 374 or equivalent;
—
chemical goggles classified under EN 16321 or equivalent ;
—
protective coverall in accordance with EN 13034 or equivalent;
(material to be specified by the authorisation holder within the product information)
The full texts of the EN standards are available in Section 6.
This is without prejudice to the application of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work. See section 6 for the full reference to this act.
For non-professional users:
—
Do not touch the product during application
—
Wash hands after use
—
Avoid contact with skin and eyes
—
Avoid splashes during application
5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
—
IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor.
—
IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112/ambulance for medical assistance.
—
Information to Healthcare personnel/doctor:
—
The eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid
—
IF SWALLOWED: Immediately rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call 112/ambulance for medical assistance.
—
IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing.
—
If symptoms: Call 112/ambulance for medical assistance.
—
If no symptoms: Call a POISON CENTRE or a doctor.
—
If medical advice is needed, have product container or label at hand.
5.4. Instructions for safe disposal of the product and its packaging
—
Do not discharge unused product on the ground, into water courses, into pipes (sink, toilets…) nor down the drains.
—
Dispose of unused product, its packaging and all other waste, in accordance with local regulations.
5.5. Conditions of storage and shelf-life of the product under normal conditions of storage
—
Shelf-life: 24 months.
—
Do not store above 30°C.
—
Protect from direct sunlight.
—
Keep out of reach of children and non-target animals/pets.
6. OTHER INFORMATION
The full titles of the EN standards and legal act referenced in section 5.2 “Risk mitigation measures” are:
EN 374 - Protective gloves against dangerous chemicals and micro-organisms
EN 16321 - Eye and face protection for occupational use
EN 13034 - Protective clothing against liquid chemicals - Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment)
Council Directive 98/24/EC of 7 April 1998 on the protection of the health and safety of workers from the risks related to chemical agents at work (fourteenth individual Directive within the meaning of Article 16(1) of Directive 89/391/EEC) ( OJ L 131, 5.5.1998, p. 11 ).
7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 9
7.1. Trade name(s), authorisation number and specific composition of each individual product
Trade name(s)
Toilet Bowl Bleach
Market area: EU
Authorisation number
EU-0029289-0021 1-9
Common name
IUPAC name
Function
CAS number
EC number
Content (%)
Active chlorine released from sodium hypochlorite
active substance
5,81 % (w/w)
Sodium hypochlorite
Sodium hypochlorite
releaser
7681-52-9
231-668-3
42,07 % (w/w)
Sodium hydroxide
Sodium hydroxide
Non-Active substance
1310-73-2
215-185-5
2 % (w/w)
