Summary of product characteristics for a biocidal product family
ANNEX IISupplementary provisions
ANNEX II Summary of product characteristics for a biocidal product family Sodium hypochlorite Liquid disinfectant biocidal product family Product type(s) PT02: Disinfectants and algaecides not intended for direct application to humans or animals PT04: Food and feed area Authorisation number EU-0029289-0000 R4BP asset number EU-0029289-0000 Part I. FIRST INFORMATION LEVEL 1. ADMINISTRATIVE INFORMATION 1.1. Family name Name Sodium hypochlorite Liquid disinfectant biocidal product family 1.2. Product type(s) Product type(s) PT02: Disinfectants and algaecides not intended for direct application to humans or animals PT04: Food and feed area 1.3. Authorisation holder Name and address of the authorisation holder Name Reckitt Benckiser Production (Poland) Sp z o.o. Address Okunin 1 05-100 Nowy Dwor Mazowiecki PL Authorisation number EU-0029289-0000 R4BP asset number EU-0029289-0000 Date of the authorisation 13 April 2025 Expiry date of the authorisation 31 March 2035 1.4. Manufacturer(s) of the product Name of manufacturer Reckitt Benckiser (UK) Ltd Address of manufacturer Sinfin Lane DE24 9GG Derby United Kingdom of Great Britain and Northern Ireland (the) Location of manufacturing sites Reckitt Benckiser (UK) Ltd site 1 Sinfin Lane DE24 9GG Derby United Kingdom of Great Britain and Northern Ireland (the) Name of manufacturer Reckitt Benckiser Production (Poland) sp z.o.o Address of manufacturer Ul. Okunin 1 05-100 Nowy Dwor Mazowiecki Poland Location of manufacturing sites Reckitt Benckiser Production (Poland) sp z.o.o site 1 Ul. Okunin 1 05-100 Nowy Dwor Mazowiecki Poland 1.5. Manufacturer(s) of the active substance(s) Active substance Active chlorine released from sodium hypochlorite Name of manufacturer PCC Rokita S.A Address of manufacturer Ul. Sienkiewicza 56-120 Brzeg Dolny Poland Location of manufacturing sites PCC Rokita S.A site 1 Ul. Sienkiewicza 56-120 Brzeg Dolny Poland Active substance Active chlorine released from sodium hypochlorite Name of manufacturer ANWIL S.A Address of manufacturer Ul. Toruńska 222 87-805 Wloclawek Poland Location of manufacturing sites ANWIL S.A site 1 Ul. Toruńska 222 87-805 Wloclawek Poland Active substance Active chlorine released from sodium hypochlorite Name of manufacturer Brenntag UK Ltd Address of manufacturer 90 Brunel Way IP24 1HP Thetford United Kingdom of Great Britain and Northern Ireland (the) Location of manufacturing sites Brenntag UK Ltd site 1 90 Brunel Way IP24 1HP Thetford United Kingdom of Great Britain and Northern Ireland (the) Active substance Active chlorine released from sodium hypochlorite Name of manufacturer INOVYN ChlorVinyls Limited Address of manufacturer South Parade, PO Box 9 WA7 4JE Runcorn United Kingdom of Great Britain and Northern Ireland (the) Location of manufacturing sites INOVYN ChlorVinyls Limited site 1 South Parade, PO Box 9, WA7 4JE Runcorn United Kingdom of Great Britain and Northern Ireland (the) Active substance Active chlorine released from sodium hypochlorite Name of manufacturer BORSODCHEM ZRT Address of manufacturer Bolyai tér 1 H-3700 Kazincbarcika Hungary Location of manufacturing sites BORSODCHEM ZRT site 1 Bolyai tér 1. H-3700 Kazincbarcika Hungary 2. PRODUCT FAMILY COMPOSITION AND FORMULATION 2.1. Qualitative and quantitative information on the composition of the family Common name IUPAC name Function CAS number EC number Content (%) Active chlorine released from sodium hypochlorite active substance 0,94 - 5,81 % (w/w) Sodium hypochlorite Sodium hypochlorite releaser 7681-52-9 231-668-3 6,83 - 42,07 % (w/w) Sodium hydroxide Sodium hydroxide Non-Active substance 1310-73-2 215-185-5 0,1 - 3,5 % (w/w) Amines, C12-14 (even numbered)-alkyldimethyl, N-oxides Amines, C12-14 (even numbered)-alkyldimethyl, N-oxides Non-Active substance 308062-28-4 931-292-6 0 - 0,85 % (w/w) 2.2. Type(s) of formulation Formulation type(s) Ready to use liquid Part II. SECOND INFORMATION LEVEL - META SPC(S) 1. META SPC 1 ADMINISTRATIVE INFORMATION 1.1. Meta SPC 1 identifier Identifier Meta SPC: Meta SPC A 1.2. Suffix to the authorisation number Number 1-1 1.3. Product type(s) Product type(s) PT02: Disinfectants and algaecides not intended for direct application to humans or animals 2. META SPC 1 COMPOSITION 2.1. Qualitative and quantitative information on the composition of the meta SPC 1 Common name IUPAC name Function CAS number EC number Content (%) Active chlorine released from sodium hypochlorite active substance 1,93 - 1,93 % (w/w) Sodium hypochlorite Sodium hypochlorite releaser 7681-52-9 231-668-3 13,965 - 13,965 % (w/w) Sodium hydroxide Sodium hydroxide Non-Active substance 1310-73-2 215-185-5 1,07 - 1,07 % (w/w) 2.2. Type(s) of formulation of the meta SPC 1 Formulation type(s) Ready to use liquid 3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 1 Hazard statements H290: May be corrosive to metals. H314: Causes severe skin burns and eye damage. H412: Harmful to aquatic life with long lasting effects. EUH206: Warning! Do not use together with other products. May release dangerous gases (chlorine). Precautionary statements P101: If medical advice is needed, have product container or label at hand. P102: Keep out of reach of children. P103: Read carefully and follow all instructions. P234: Keep only in original packaging. P260: Do not breathe vapours. P260: Do not breathe spray. P264: Wash hands thoroughly after handling. P273: Avoid release to the environment. P280: Wear protective gloves/protective clothing/eye protection/face protection. P363: Wash contaminated clothing before reuse. P390: Absorb spillage to prevent material damage. P406: Store in a corrosive resistant container with a resistant inner liner. P301+P330+P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting. P310: Immediately call a POISON CENTER. P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing. P405: Store locked up. P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P501: Dispose of contents in accordance with local/regional regulations. P501: Dispose of container in accordance with local/regional regulations. 4. AUTHORISED USE(S) OF THE META SPC 4.1. Use description Table 1. Toilet bowl disinfection Product type PT02: Disinfectants and algaecides not intended for direct application to humans or animals Where relevant, an exact description of the authorised use - Target organism(s) (including development stage) Scientific name: Bacteria Common name: Bacteria Development stage: Other Scientific name: Fungi Common name: fungi Development stage: Other Scientific name: Yeast Common name: Yeast Development stage: other Scientific name: Virus Common name: Virus Development stage: Other Field(s) of use indoor use Indoor (domestic, institutional and medical areas) Application method(s) Method: Pouring Detailed description: - Application rate(s) and frequency Application rate: 80 ml/toilet bowl Ready to use product Number and timing of application: - Contact time: Bacteria, yeast, fungi and virus: 15 min Room temperature Category(ies) of users professional ; general public (non-professional) Pack sizes and packaging material 500 mL, 680 mL, 700 mL, 750 mL, 1L opaque HDPE bottles. Plastic (polypropylene) cap. Plastic insert plug and bent bottle neck (LDPP) CLP regulation apply, as products are classified H314, child proof closure and a tactile warning are required for packaging of non professional users. 4.1.1. Use-specific instructions See general directions for use. 4.1.2. Use-specific risk mitigation measures See general directions for use. 4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use. 4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use. 4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use. 5. GENERAL DIRECTIONS FOR USE OF THE META SPC 1 5.1. Instructions for use — Comply with the instruction for use. — For healthcare settings: clean carefully the surfaces before application of the product. — Respect the conditions of use of the product (concentration, contact time, temperature, etc.). — Squeeze and apply slowly all around the inside of the bowl, allowing enough liquid to cover the bowl completely. — The recommended dose is approximately 80 mL. — Products should not be used in conjunction with acids or ammonia. — No other cleaning agents should be used in conjunction with the product. — Inform the registration holder if the treatment is ineffective. 5.2. Risk mitigation measures For professional users: Wear personal protective equipment during application of the products: — chemical resistant gloves classified under EN 374 or equivalent; — chemical goggles classified under EN 16321 or equivalent; — protective coverall in accordance with EN 13034 or equivalent; (material to be specified by the authorisation holder within the product information) The full texts of the EN standards are available in Section 6 This is without prejudice to the application of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work. See section 6 for the full reference to this act. For non-professional users: — Do not touch the product during application — Wash hands after use — Avoid contact with skin and eyes — Avoid splashes during application 5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment — IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor. — IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112/ambulance for medical assistance. — Information to Healthcare personnel/doctor: — The eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid. — IF SWALLOWED: Immediately rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call 112/ambulance for medical assistance. — IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing. — If symptoms: Call 112/ambulance for medical assistance. — If no symptoms: Call a POISON CENTRE or a doctor. — If medical advice is needed, have product container or label at hand. 5.4. Instructions for safe disposal of the product and its packaging — Do not discharge unused product on the ground, into water courses, into pipes (sink, toilets…) nor down the drains. — Dispose of unused product, its packaging and all other waste, in accordance with local regulations. 5.5. Conditions of storage and shelf-life of the product under normal conditions of storage — Shelf-life: 24 months. — Do not store above 30°C. — Protect from direct sunlight. — Keep out of reach of children and non-target animals/pets. 6. OTHER INFORMATION The full titles of the EN standards and legal act referenced in section 5.2 “Risk mitigation measures” are: EN 374 - Protective gloves against dangerous chemicals and micro-organisms EN 16321 - Eye and face protection for occupational use EN 13034 - Protective clothing against liquid chemicals - Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment) Council Directive 98/24/EC of 7 April 1998 on the protection of the health and safety of workers from the risks related to chemical agents at work (fourteenth individual Directive within the meaning of Article 16(1) of Directive 89/391/EEC) ( OJ L 131, 5.5.1998, p. 11 ). 7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 1 7.1. Trade name(s), authorisation number and specific composition of each individual product Trade name(s) White & Shine Original 1 Market area: EU Authorisation number EU-0029289-0001 1-1 Common name IUPAC name Function CAS number EC number Content (%) Active chlorine released from sodium hypochlorite active substance 1,93 % (w/w) Sodium hypochlorite Sodium hypochlorite releaser 7681-52-9 231-668-3 13,965 % (w/w) Sodium hydroxide Sodium hydroxide Non-Active substance 1310-73-2 215-185-5 1,07 % (w/w) 7.2. Trade name(s), authorisation number and specific composition of each individual product Trade name(s) White & Shine Original 2 Market area: EU Authorisation number EU-0029289-0002 1-1 Common name IUPAC name Function CAS number EC number Content (%) Active chlorine released from sodium hypochlorite active substance 1,93 % (w/w) Sodium hypochlorite Sodium hypochlorite releaser 7681-52-9 231-668-3 13,965 % (w/w) Sodium hydroxide Sodium hydroxide Non-Active substance 1310-73-2 215-185-5 1,07 % (w/w) 7.3. Trade name(s), authorisation number and specific composition of each individual product Trade name(s) White & Shine Citrus Market area: EU Authorisation number EU-0029289-0003 1-1 Common name IUPAC name Function CAS number EC number Content (%) Active chlorine released from sodium hypochlorite active substance 1,93 % (w/w) Sodium hypochlorite Sodium hypochlorite releaser 7681-52-9 231-668-3 13,965 % (w/w) Sodium hydroxide Sodium hydroxide Non-Active substance 1310-73-2 215-185-5 1,07 % (w/w) 7.4. Trade name(s), authorisation number and specific composition of each individual product Trade name(s) White & Shine Eucalyptus Mint Market area: EU Authorisation number EU-0029289-0004 1-1 Common name IUPAC name Function CAS number EC number Content (%) Active chlorine released from sodium hypochlorite active substance 1,93 % (w/w) Sodium hypochlorite Sodium hypochlorite releaser 7681-52-9 231-668-3 13,965 % (w/w) Sodium hydroxide Sodium hydroxide Non-Active substance 1310-73-2 215-185-5 1,07 % (w/w) 1. META SPC 2 ADMINISTRATIVE INFORMATION 1.1. Meta SPC 2 identifier Identifier Meta SPC: Meta SPC B 1.2. Suffix to the authorisation number Number 1-2 1.3. Product type(s) Product type(s) PT02: Disinfectants and algaecides not intended for direct application to humans or animals 2. META SPC 2 COMPOSITION 2.1. Qualitative and quantitative information on the composition of the meta SPC 2 Common name IUPAC name Function CAS number EC number Content (%) Active chlorine released from sodium hypochlorite active substance 0,95 - 0,95 % (w/w) Sodium hypochlorite Sodium hypochlorite releaser 7681-52-9 231-668-3 6,9 - 6,9 % (w/w) Sodium hydroxide Sodium hydroxide Non-Active substance 1310-73-2 215-185-5 3,5 - 3,5 % (w/w) 2.2. Type(s) of formulation of the meta SPC 2 Formulation type(s) Ready to use liquid 3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 2 Hazard statements H290: May be corrosive to metals. H314: Causes severe skin burns and eye damage. H412: Harmful to aquatic life with long lasting effects. Precautionary statements P101: If medical advice is needed, have product container or label at hand. P102: Keep out of reach of children. P103: Read carefully and follow all instructions. P234: Keep only in original packaging. P260: Do not breathe vapours. P260: Do not breathe spray P264: Wash hands thoroughly after handling. P273: Avoid release to the environment. P280: Wear protective gloves/protective clothing/eye protection/face protection. P301+P330+P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting. P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P363: Wash contaminated clothing before reuse. P390: Absorb spillage to prevent material damage. P310: Immediately call a poison center. P406: Store in a corrosive resistant container with a resistant inner liner. P405: Store locked up. P501: Dispose of contents in accordance with local/regional regulations. P501: Dispose of container in accordance with local/regional regulations. 4. AUTHORISED USE(S) OF THE META SPC 4.1. Use description Table 1. Toilet bowl disinfection Product type PT02: Disinfectants and algaecides not intended for direct application to humans or animals Where relevant, an exact description of the authorised use - Target organism(s) (including development stage) Scientific name: Bacteria Common name: Bacteria Development stage: Other Scientific name: Fungi Common name: fungi Development stage: Other Scientific name: Yeast Common name: Yeast Development stage: other Field(s) of use indoor use Indoor (domestic, institutional and medical areas) Application method(s) Method: pouring Detailed description: - Application rate(s) and frequency Application rate: 80 ml/toilet bowl Ready to use product. Number and timing of application: - Contact time: Bacteria, yeast and fungi: 15 minutes Room temperature Category(ies) of users professional ; general public (non-professional) Pack sizes and packaging material 500 mL, 680 mL, 700 mL, 750 mL, 1 L opaque HDPE bottles. Plastic (polypropylene) cap. Plastic insert plug and bent bottle neck (LDPP). CLP regulation apply, as products are classified H314, child proof closure and a tactile warning are required for packaging of non professional users. 4.1.1. Use-specific instructions See general directions for use. 4.1.2. Use-specific risk mitigation measures See general directions for use. 4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use. 4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use. 4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use. 5. GENERAL DIRECTIONS FOR USE OF THE META SPC 2 5.1. Instructions for use — Comply with the instruction for use. — For healthcare settings: clean carefully the surfaces before application of the product. — Respect the conditions of use of the product (concentration, contact time, temperature, etc.). — Squeeze and apply slowly all around the inside of the bowl, allowing enough liquid to cover the bowl completely. — The recommended dose is approximately 80 mL. — Products should not be used in conjunction with acids or ammonia. — No other cleaning agents should be used in conjunction with the product. — Inform the registration holder if the treatment is ineffective. 5.2. Risk mitigation measures For professional users: Wear personal protective equipment during application of the products: — chemical resistant gloves classified under EN 374 or equivalent; — chemical goggles classified under EN 16321 or equivalent; — protective coverall in accordance with EN 13034 or equivalent. (material to be specified by the authorisation holder within the product information) The full texts of the EN standards are available in Section 6 This is without prejudice to the application of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work. See section 6 for the full reference to this act. For non-professional users: — Do not touch the product during application — Wash hands after use — Avoid contact with skin and eyes — Avoid splashes during application 5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment — IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor. — IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112/ambulance for medical assistance. — Information to Healthcare personnel/doctor: — The eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid. — IF SWALLOWED: Immediately rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call 112/ambulance for medical assistance. — IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing. — If symptoms: Call 112/ambulance for medical assistance. — If no symptoms: Call a POISON CENTRE or a doctor. — If medical advice is needed, have product container or label at hand. 5.4. Instructions for safe disposal of the product and its packaging — Do not discharge unused product on the ground, into water courses, into pipes (sink, toilets…) nor down the drains. — Dispose of unused product, its packaging and all other waste, in accordance with local regulations. 5.5. Conditions of storage and shelf-life of the product under normal conditions of storage — Shelf-life: 18 months. — Do not store above 30°C. — Protect from direct sunlight. — Keep out of reach of children and non-target animals/pets. 6. OTHER INFORMATION The full titles of the EN standards and legal act referenced in section 5.2 “Risk mitigation measures” are: EN 374 - Protective gloves against dangerous chemicals and micro-organisms EN 16321 - Eye and face protection for occupational use EN 13034 - Protective clothing against liquid chemicals - Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment) Council Directive 98/24/EC of 7 April 1998 on the protection of the health and safety of workers from the risks related to chemical agents at work (fourteenth individual Directive within the meaning of Article 16(1) of Directive 89/391/EEC) ( OJ L 131, 5.5.1998, p. 11 ). 7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 2 7.1. Trade name(s), authorisation number and specific composition of each individual product Trade name(s) Power Stain & Drain Market area: EU Authorisation number EU-0029289-0005 1-2 Common name IUPAC name Function CAS number EC number Content (%) Active chlorine released from sodium hypochlorite active substance 0,95 % (w/w) Sodium hypochlorite Sodium hypochlorite releaser 7681-52-9 231-668-3 6,9 % (w/w) Sodium hydroxide Sodium hydroxide Non-Active substance 1310-73-2 215-185-5 3,5 % (w/w) 7.2. Trade name(s), authorisation number and specific composition of each individual product Trade name(s) Power & Pure White & Shine Market area: EU Authorisation number EU-0029289-0006 1-2 Common name IUPAC name Function CAS number EC number Content (%) Active chlorine released from sodium hypochlorite active substance 0,95 % (w/w) Sodium hypochlorite Sodium hypochlorite releaser 7681-52-9 231-668-3 6,9 % (w/w) Sodium hydroxide Sodium hydroxide Non-Active substance 1310-73-2 215-185-5 3,5 % (w/w) 1. META SPC 3 ADMINISTRATIVE INFORMATION 1.1. Meta SPC 3 identifier Identifier Meta SPC: Meta SPC C 1.2. Suffix to the authorisation number Number 1-3 1.3. Product type(s) Product type(s) PT02: Disinfectants and algaecides not intended for direct application to humans or animals 2. META SPC 3 COMPOSITION 2.1. Qualitative and quantitative information on the composition of the meta SPC 3 Common name IUPAC name Function CAS number EC number Content (%) Active chlorine released from sodium hypochlorite active substance 4,28 - 4,54 % (w/w) Sodium hypochlorite Sodium hypochlorite releaser 7681-52-9 231-668-3 31,005 - 32,87 % (w/w) Sodium hydroxide Sodium hydroxide Non-Active substance 1310-73-2 215-185-5 1 - 1 % (w/w) 2.2. Type(s) of formulation of the meta SPC 3 Formulation type(s) Ready to use liquid 3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 3 Hazard statements H290: May be corrosive to metals. H314: Causes severe skin burns and eye damage. H410: Very toxic to aquatic life with long lasting effects. EUH206: Warning! Do not use together with other products. May release dangerous gases (chlorine). Precautionary statements P101: If medical advice is needed, have product container or label at hand. P102: Keep out of reach of children. P234: Keep only in original packaging. P264: Wash hands thoroughly after handling. P273: Avoid release to the environment. P280: Wear protective gloves/protective clothing/eye protection/face protection.. P301+P330+P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting. P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P363: Wash contaminated clothing before reuse. P390: Absorb spillage to prevent material damage. P391: Collect spillage. P406: Store in a corrosive resistant container with a resistant inner liner. P103: Read carefully and follow all instructions. P260: Do not breathe vapours. P260: Do not breathe spray. P310: Immediately call a poison center. P405: Store locked up. P501: Dispose of contents in accordance with local/regional regulations. P501: Dispose of container in accordance with local/regional regulations. 4. AUTHORISED USE(S) OF THE META SPC 4.1. Use description Table 1. Toilet bowl disinfection Product type PT02: Disinfectants and algaecides not intended for direct application to humans or animals Where relevant, an exact description of the authorised use - Target organism(s) (including development stage) Scientific name: Bacteria Common name: Bacteria Development stage: Other Scientific name: Fungi Common name: fungi Development stage: Other Scientific name: Yeast Common name: Yeast Development stage: other Field(s) of use indoor use Indoor (domestic, institutional and medical areas) Application method(s) Method: pouring Detailed description: - Application rate(s) and frequency Application rate: 80 ml/ toilet bowl Ready to use product. Number and timing of application: - Contact time: Bacteria, yeast and fungi: 15 minutes Room temperature Category(ies) of users professional ; general public (non-professional) Pack sizes and packaging material 500 mL, 680 mL, 700 mL, 750 mL opaque HDPE bottles. Plastic (polypropylene) cap. Plastic insert plug and bent bottle neck (LDPP). CLP regulation apply, as products are classified H314, child proof closure and a tactile warning are required for packaging of non professional users. 4.1.1. Use-specific instructions See general directions for use. 4.1.2. Use-specific risk mitigation measures See general directions for use. 4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use. 4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use. 4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use. 5. GENERAL DIRECTIONS FOR USE OF THE META SPC 3 5.1. Instructions for use — Comply with the instruction for use. — For healthcare settings: clean carefully the surfaces before application of the product. — Respect the conditions of use of the product (concentration, contact time, temperature, etc.). — Squeeze and apply slowly all around the inside of the bowl, allowing enough liquid to cover the bowl completely. — The recommended dose is approximately 80 mL. — Products should not be used in conjunction with acids or ammonia. — No other cleaning agents should be used in conjunction with the product. — Inform the registration holder if the treatment is ineffective. 5.2. Risk mitigation measures For professional users: Wear personal protective equipment during application of the products: — chemical resistant gloves classified under EN 374 or equivalent; — chemical goggles classified under EN 16321 or equivalent; — protective coverall in accordance with EN 13034 or equivalent. — (material to be specified by the authorisation holder within the product information) The full texts of the EN standards are available in Section 6 This is without prejudice to the application of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work. See section 6 for the full reference to this act. For non-professional users: — Do not touch the product during application — Wash hands after use — Avoid contact with skin and eyes — Avoid splashes during application 5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment — IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor. — IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112/ambulance for medical assistance. — Information to Healthcare personnel/doctor: — The eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid — IF SWALLOWED: Immediately rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call 112/ambulance for medical assistance. — IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing. — If symptoms: Call 112/ambulance for medical assistance. — If no symptoms: Call a POISON CENTRE or a doctor. — If medical advice is needed, have product container or label at hand. 5.4. Instructions for safe disposal of the product and its packaging — Do not discharge unused product on the ground, into water courses, into pipes (sink, toilets…) nor down the drains. — Dispose of unused product, its packaging and all other waste, in accordance with local regulations. 5.5. Conditions of storage and shelf-life of the product under normal conditions of storage — Shelf-life: 24 months. — Do not store above 30°C. — Protect from direct sunlight. — Keep out of reach of children and non-target animals/pets. 6. OTHER INFORMATION The full titles of the EN standards and legal act referenced in section 5.2 “Risk mitigation measures” are: EN 374 - Protective gloves against dangerous chemicals and micro-organisms EN 16321 - Eye and face protection for occupational use EN 13034 - Protective clothing against liquid chemicals - Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment) Council Directive 98/24/EC of 7 April 1998 on the protection of the health and safety of workers from the risks related to chemical agents at work (fourteenth individual Directive within the meaning of Article 16(1) of Directive 89/391/EEC) ( OJ L 131, 5.5.1998, p. 11 ). 7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 3 7.1. Trade name(s), authorisation number and specific composition of each individual product Trade name(s) Toilet Bowl Cleaner Lemon Market area: EU Authorisation number EU-0029289-0007 1-3 Common name IUPAC name Function CAS number EC number Content (%) Active chlorine released from sodium hypochlorite active substance 4,54 % (w/w) Sodium hypochlorite Sodium hypochlorite releaser 7681-52-9 231-668-3 32,87 % (w/w) Sodium hydroxide Sodium hydroxide Non-Active substance 1310-73-2 215-185-5 1 % (w/w) 7.2. Trade name(s), authorisation number and specific composition of each individual product Trade name(s) Toilet Bowl Cleaner Pine Market area: EU Authorisation number EU-0029289-0008 1-3 Common name IUPAC name Function CAS number EC number Content (%) Active chlorine released from sodium hypochlorite active substance 4,54 % (w/w) Sodium hypochlorite Sodium hypochlorite releaser 7681-52-9 231-668-3 32,87 % (w/w) Sodium hydroxide Sodium hydroxide Non-Active substance 1310-73-2 215-185-5 1 % (w/w) 7.3. Trade name(s), authorisation number and specific composition of each individual product Trade name(s) Stain and Toilet Market area: EU Authorisation number EU-0029289-0009 1-3 Common name IUPAC name Function CAS number EC number Content (%) Active chlorine released from sodium hypochlorite active substance 4,28 % (w/w) Sodium hypochlorite Sodium hypochlorite releaser 7681-52-9 231-668-3 31,005 % (w/w) Sodium hydroxide Sodium hydroxide Non-Active substance 1310-73-2 215-185-5 1 % (w/w) 1. META SPC 4 ADMINISTRATIVE INFORMATION 1.1. Meta SPC 4 identifier Identifier Meta SPC: Meta SPC D 1.2. Suffix to the authorisation number Number 1-4 1.3. Product type(s) Product type(s) PT02: Disinfectants and algaecides not intended for direct application to humans or animals 2. META SPC 4 COMPOSITION 2.1. Qualitative and quantitative information on the composition of the meta SPC 4 Common name IUPAC name Function CAS number EC number Content (%) Active chlorine released from sodium hypochlorite active substance 4,33 - 4,33 % (w/w) Sodium hypochlorite Sodium hypochlorite releaser 7681-52-9 231-668-3 31,345 - 31,345 % (w/w) Sodium hydroxide Sodium hydroxide Non-Active substance 1310-73-2 215-185-5 2,5 - 2,5 % (w/w) 2.2. Type(s) of formulation of the meta SPC 4 Formulation type(s) Ready to use liquid 3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 4 Hazard statements H290: May be corrosive to metals. H314: Causes severe skin burns and eye damage. H410: Very toxic to aquatic life with long lasting effects. EUH206: Warning! Do not use together with other products. May release dangerous gases (chlorine). Precautionary statements P101: If medical advice is needed, have product container or label at hand. P102: Keep out of reach of children. P234: Keep only in original packaging. P264: Wash hands thoroughly after handling. P273: Avoid release to the environment. P280: Wear protective gloves/protective clothing/eye protection/face protection.. P301+P330+P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting. P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P363: Wash contaminated clothing before reuse. P390: Absorb spillage to prevent material damage. P391: Collect spillage. P406: Store in a in a corrosive resistant container with a resistant inner liner. P103: Read carefully and follow all instructions. P260: Do not breathe vapours. P260: Do not breathe spray. P310: Immediately call a POISON CENTER. P405: Store locked up. P501: Dispose of contents in accordance with local/regional regulations. 4. AUTHORISED USE(S) OF THE META SPC 4.1. Use description Table 1. Drain pipe surface disinfection Product type PT02: Disinfectants and algaecides not intended for direct application to humans or animals Where relevant, an exact description of the authorised use - Target organism(s) (including development stage) Scientific name: Bacteria Common name: Bacteria Development stage: Other Scientific name: Fungi Common name: fungi Development stage: Other Scientific name: Yeast Common name: Yeast Development stage: other Field(s) of use indoor use Indoor (domestic and institutional areas) Application method(s) Method: pouring Detailed description: - Application rate(s) and frequency Application rate: - Ready to use product. Number and timing of application: once a week maximum Contact time: Bacteria, yeast and fungi: 15 minutes Room temperature Category(ies) of users professional ; general public (non-professional) Pack sizes and packaging material 500 mL, 750 mL, 1L opaque HDPE bottles. Plastic (polypropylene) cap Plastic insert plug (LDPP) Plastic (HDPE/polypropylene) cap Plastic insert nozzle (polypropylene) CLP regulation apply, as products are classified H314, child proof closure and a tactile warning are required for packaging of non professional users. 4.1.1. Use-specific instructions See general directions for use. 4.1.2. Use-specific risk mitigation measures See general directions for use. 4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use. 4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use. 4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use. 5. GENERAL DIRECTIONS FOR USE OF THE META SPC 4 5.1. Instructions for use — Comply with the instruction for use. — Respect the conditions of use of the product (concentration, contact time, temperature, etc.). — The recommended dose is approximately 250 mL which the user is guided to measure based on a proportion of the pack size: — For 750 mL: Use sufficient liquid to thoroughly coat the pipe. This may require 1/3rd of the contents. — For 500 mL: Carefully uncap and without squeezing the bottle, pour gently ½ bottle of gel into the drain. — For 1 L: Carefully uncap and without squeezing the bottle, pour gently ¼ bottle of gel into the drain. — Once a week maximum. — Product to be applied by the user by placing bottle near to the drain hole and pouring product down the drain. — Rinse thoroughly after use. — No other cleaning agents should be used in conjunction with the product. — Inform the registration holder if the treatment is ineffective. 5.2. Risk mitigation measures For professional users: Wear personal protective equipment during application of the products: — chemical resistant gloves classified under EN 374 or equivalent ; — chemical goggles classified under EN 16321 or equivalent ; — protective coverall in accordance with EN 13034 or equivalent; (material to be specified by the authorisation holder within the product information) The full texts of the EN standards are available in Section 6 This is without prejudice to the application of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work. See section 6 for the full reference to this act. For non-professional users: — Do not touch the product during application — Wash hands after use — Avoid contact with skin and eyes. 5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment — IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor. — IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112/ambulance for medical assistance. — Information to Healthcare personnel/doctor: — The eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid. — IF SWALLOWED: Immediately rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call 112/ambulance for medical assistance. — IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing. — If symptoms: Call 112/ambulance for medical assistance. — If no symptoms: Call a POISON CENTRE or a doctor. — If medical advice is needed, have product container or label at hand. 5.4. Instructions for safe disposal of the product and its packaging — Do not discharge unused product on the ground, into water courses, into pipes (sink, toilets…) nor down the drains. — Dispose of unused product, its packaging and all other waste, in accordance with local regulations. 5.5. Conditions of storage and shelf-life of the product under normal conditions of storage — Shelf-life: 24 months. — Do not store above 30°C. — Protect from direct sunlight. — Keep out of reach of children and non-target animals/pets. 6. OTHER INFORMATION The full titles of the EN standards and legal act referenced in section 5.2 “Risk mitigation measures” are: EN 374 - Protective gloves against dangerous chemicals and micro-organisms EN 16321 - Eye and face protection for occupational use EN 13034 - Protective clothing against liquid chemicals - Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment) Council Directive 98/24/EC of 7 April 1998 on the protection of the health and safety of workers from the risks related to chemical agents at work (fourteenth individual Directive within the meaning of Article 16(1) of Directive 89/391/EEC) ( OJ L 131, 5.5.1998, p. 11 ). 7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 4 7.1. Trade name(s), authorisation number and specific composition of each individual product Trade name(s) Liquid Drain Opener Market area: EU Authorisation number EU-0029289-0010 1-4 Common name IUPAC name Function CAS number EC number Content (%) Active chlorine released from sodium hypochlorite active substance 4,33 % (w/w) Sodium hypochlorite Sodium hypochlorite releaser 7681-52-9 231-668-3 31,345 % (w/w) Sodium hydroxide Sodium hydroxide Non-Active substance 1310-73-2 215-185-5 2,5 % (w/w) 1. META SPC 5 ADMINISTRATIVE INFORMATION 1.1. Meta SPC 5 identifier Identifier Meta SPC: Meta SPC E 1.2. Suffix to the authorisation number Number 1-5 1.3. Product type(s) Product type(s) PT02: Disinfectants and algaecides not intended for direct application to humans or animals 2. META SPC 5 COMPOSITION 2.1. Qualitative and quantitative information on the composition of the meta SPC 5 Common name IUPAC name Function CAS number EC number Content (%) Active chlorine released from sodium hypochlorite active substance 1,87 - 1,87 % (w/w) Sodium hypochlorite Sodium hypochlorite releaser 7681-52-9 231-668-3 13,52 - 13,52 % (w/w) Sodium hydroxide Sodium hydroxide Non-Active substance 1310-73-2 215-185-5 1 - 1 % (w/w) 2.2. Type(s) of formulation of the meta SPC 5 Formulation type(s) Ready to use liquid 3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 5 Hazard statements H290: May be corrosive to metals. H314: Causes severe skin burns and eye damage. H412: Harmful to aquatic life with long lasting effects. EUH206: Warning! Do not use together with other products. May release dangerous gases (chlorine). Precautionary statements P101: If medical advice is needed, have product container or label at hand. P102: Keep out of reach of children. P234: Keep only in original packaging. P264: Wash hands thoroughly after handling. P273: Avoid release to the environment. P280: Wear protective gloves/protective clothing/eye protection/face protection.. P301+P330+P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting. P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P363: Wash contaminated clothing before reuse. P390: Absorb spillage to prevent material damage. P406: Store in a corrosive resistant container with a resistant inner liner. P103: Read carefully and follow all instructions. P260: Do not breathe vapours. P260: Do not breathe spray. P310: Immediately call a POISON CENTER. P405: Store locked up. P501: Dispose of contents in accordance with local/regional regulations. P501: Dispose of container in accordance with local/regional regulations. 4. AUTHORISED USE(S) OF THE META SPC 4.1. Use description Table 1. Drain pipe surface disinfection Product type PT02: Disinfectants and algaecides not intended for direct application to humans or animals Where relevant, an exact description of the authorised use - Target organism(s) (including development stage) Scientific name: Bacteria Common name: Bacteria Development stage: Other Scientific name: Fungi Common name: fungi Development stage: Other Scientific name: Yeast Common name: Yeast Development stage: other Field(s) of use indoor use Indoor (domestic and institutional areas) Application method(s) Method: pouring Detailed description: - Application rate(s) and frequency Application rate: - Ready to use product. Number and timing of application: once a week maximum Contact time: Bacteria, yeast and fungi: 15 minutes Room temperature Category(ies) of users professional ; general public (non-professional) Pack sizes and packaging material 500 mL, 750 mL, 1L, 1.5L, 2L opaque HDPE bottles. Plastic (polypropylene) cap, Plastic insert plug (LDPP). CLP regulation apply, as products are classified H314, child proof closure and a tactile warning are required for packaging of non professional users. 4.1.1. Use-specific instructions See general directions for use. 4.1.2. Use-specific risk mitigation measures See general directions for use. 4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use. 4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use. 4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use. 5. GENERAL DIRECTIONS FOR USE OF THE META SPC 5 5.1. Instructions for use — Comply with the instruction for use. — Respect the conditions of use of the product (concentration, contact time, temperature, etc.). — The recommended dose is approximately 125 mL which the user is guided to measure based on a proportion of the pack size: — For 750 mL (without bottle handle): Carefully squeeze bottle to apply the liquid directly into the drain until all surfaces are covered (approximately. 125 mL). — For 500 mL, 750 mL, 1 L, 1.5 L & 2 L (bottle with handle): Carefully uncap and without squeezing the bottle, carefully pour the gel into the drain until all surfaces are covered (approximately 125 mL). — Once a week maximum. — Product to be applied by the user by placing bottle near to the drain hole and pouring product down the drain. — Rinse thoroughly after use. — Products should not be used in conjunction with acids or ammonia — Inform the registration holder if the treatment is ineffective. 5.2. Risk mitigation measures For professional users: Wear personal protective equipment during application of the products: — chemical resistant gloves classified under EN 374 or equivalent; — chemical goggles classified under EN 16321 or equivalent ; — protective coverall in accordance with EN 13034 or equivalent; (material to be specified by the authorisation holder within the product information) The full texts of the EN standards are available in Section 6 This is without prejudice to the application of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work. See section 6 for the full reference to this act. For non-professional users: — Do not touch the product during application — Wash hand after use — Avoid contact with skin and eyes 5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment — IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor. — IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112/ambulance for medical assistance. — Information to Healthcare personnel/doctor: — The eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid. — IF SWALLOWED: Immediately rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call 112/ambulance for medical assistance. — IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing. — If symptoms: Call 112/ambulance for medical assistance. — If no symptoms: Call a POISON CENTRE or a doctor. — If medical advice is needed, have product container or label at hand. 5.4. Instructions for safe disposal of the product and its packaging — Do not discharge unused product on the ground, into water courses, into pipes (sink, toilets…) nor down the drains. — Dispose of unused product, its packaging and all other waste, in accordance with local regulations. 5.5. Conditions of storage and shelf-life of the product under normal conditions of storage — Shelf-life: 24 months. — Do not store above 30°C. — Protect from direct sunlight. — Keep out of reach of children and non-target animals/pets. 6. OTHER INFORMATION The full titles of the EN standards and legal act referenced in section 5.2 “Risk mitigation measures” are: EN 374 - Protective gloves against dangerous chemicals and micro-organisms EN 16321 - Eye and face protection for occupational use EN 13034 - Protective clothing against liquid chemicals - Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment) Council Directive 98/24/EC of 7 April 1998 on the protection of the health and safety of workers from the risks related to chemical agents at work (fourteenth individual Directive within the meaning of Article 16(1) of Directive 89/391/EEC) ( OJ L 131, 5.5.1998, p. 11 ). 7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 5 7.1. Trade name(s), authorisation number and specific composition of each individual product Trade name(s) Bleach Maintainer Market area: EU Authorisation number EU-0029289-0011 1-5 Common name IUPAC name Function CAS number EC number Content (%) Active chlorine released from sodium hypochlorite active substance 1,87 % (w/w) Sodium hypochlorite Sodium hypochlorite releaser 7681-52-9 231-668-3 13,52 % (w/w) Sodium hydroxide Sodium hydroxide Non-Active substance 1310-73-2 215-185-5 1 % (w/w) 1. META SPC 6 ADMINISTRATIVE INFORMATION 1.1. Meta SPC 6 identifier Identifier Meta SPC: Meta SPC F 1.2. Suffix to the authorisation number Number 1-6 1.3. Product type(s) Product type(s) PT04: Food and feed area PT02: Disinfectants and algaecides not intended for direct application to humans or animals 2. META SPC 6 COMPOSITION 2.1. Qualitative and quantitative information on the composition of the meta SPC 6 Common name IUPAC name Function CAS number EC number Content (%) Active chlorine released from sodium hypochlorite active substance 0,94 - 0,94 % (w/w) Sodium hypochlorite Sodium hypochlorite releaser 7681-52-9 231-668-3 6,83 - 6,83 % (w/w) Sodium hydroxide Sodium hydroxide Non-Active substance 1310-73-2 215-185-5 0,15 - 0,2 % (w/w) Amines, C12-14 (even numbered)-alkyldimethyl, N-oxides Amines, C12-14 (even numbered)-alkyldimethyl, N-oxides Non-Active substance 308062-28-4 931-292-6 0,14 - 0,14 % (w/w) 2.2. Type(s) of formulation of the meta SPC 6 Formulation type(s) Ready to use liquid 3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 6 Hazard statements H290: May be corrosive to metals. H315: Causes skin irritation. H319: Causes serious eye irritation. H412: Harmful to aquatic life with long lasting effects. Precautionary statements P101: If medical advice is needed, have product container or label at hand. P102: Keep out of reach of children. P234: Keep only in original packaging. P264: Wash hands thoroughly after handling. P273: Avoid release to the environment. P280: Wear protective gloves/protective clothing/eye protection/face protection.. P302+P352: IF ON SKIN: Wash with plenty of soap and water. P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P337+P313: If eye irritation persists: Get medical advice. P390: Absorb spillage to prevent material damage. P406: Store in a corrosive resistant container with a resistant inner liner. P103: Read carefully and follow all instructions. P332+P313: If skin irritation occurs: Get medical advice. P362+P364: Take off contaminated clothing and wash it before reuse. P310: Immediately call a POISON CENTER. P501: Dispose of contents in accordance with local/regional regulations. P501: Dispose of container in accordance with local/regional regulations. 4. AUTHORISED USE(S) OF THE META SPC 4.1. Use description Table 1. Hard non porous surface disinfection Product type PT02: Disinfectants and algaecides not intended for direct application to humans or animals Where relevant, an exact description of the authorised use - Target organism(s) (including development stage) Scientific name: Bacteria Common name: Bacteria Development stage: Other Scientific name: Fungi Common name: fungi Development stage: Other Scientific name: Yeast Common name: Yeast Development stage: Other Field(s) of use indoor use Indoor (domestic and institutional areas) Application method(s) Method: spraying Detailed description: - Application rate(s) and frequency Application rate: - Ready to use product. Number and timing of application: - Contact time: Bacteria, yeast and fungi: 5 minutes Room temperature Category(ies) of users professional ; general public (non-professional) Pack sizes and packaging material 500 mL, 750 mL, 1L opaque HDPE bottles with TS6 spray trigger or TS6 foam trigger 4.1.1. Use-specific instructions See general directions for use. 4.1.2. Use-specific risk mitigation measures For non-professional users: — Product shall be sprayed downward — Wash hands after use — Avoid contact with skin and eyes For secondary exposure of general public: — It shall be ensured that bystanders and general public do not touch the surface until the surface is rinsed and dry. 4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use. 4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use. 4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use. 4.2. Use description Table 2. Hard non porous surface disinfection Product type PT04: Food and feed area Target organism(s) (including development stage) Scientific name: Bacteria Common name: Bacteria Development stage: Other Scientific name: Fungi Common name: fungi Development stage: Other Scientific name: Yeast Common name: Yeast Development stage: Other Field(s) of use indoor use Indoor (domestic and institutional areas) Application method(s) Method: spraying Detailed description: - Application rate(s) and frequency Application rate: - Ready to use product. Number and timing of application: - Contact time: Bacteria, yeast and fungi: 5 minutes Room temperature Category(ies) of users professional Pack sizes and packaging material 500 mL, 750 mL, 1L opaque HDPE bottles with TS6 spray trigger or TS6 foam trigger 4.2.1. Use-specific instructions See general directions for use. 4.2.2. Use-specific risk mitigation measures See general directions for use. For food commodities, ensure that the concentration of chlorate present in food does not exceed the MRL values set in Regulation 2020/749. See section 6 for the full reference to this act. 4.2.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use. 4.2.4. Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use. 4.2.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use. 5. GENERAL DIRECTIONS FOR USE OF THE META SPC 6 5.1. Instructions for use — Comply with the instruction for use. Respect the conditions of use of the product (concentration, contact time, temperature, etc.). — Ensure complete wetting on the surfaces, leave for appropriate contact time. — Product to be applied to hard surfaces by spraying. The nozzle of the product should be turned to the ‘ ‘on’ ’ position. Users are advised to spray product 20-25 cm away from surfaces. — Rinse treated surfaces after application. — Products should not be used in conjunction with acids or ammonia. — Inform the registration holder if the treatment is ineffective. 5.2. Risk mitigation measures For professional users: Wear personal protective equipment during application and post-application of the products: — chemical resistant gloves classified under EN 374 or equivalent; — chemical googles classified under EN 16321 or equivalent; — protective coverall in accordance with EN 13034 or equivalent. (material to be specified by the authorisation holder within the product information) The full texts of the EN standards are available in Section 6 This is without prejudice to the application of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work. See section 6 for the full reference to this act. 5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment — IF ON SKIN: Take off all contaminated clothing and wash it before reuse. Wash skin with water. If skin irritation occurs: Get medical advice. — IF IN EYES: Rinse with water. Remove contact lenses, if present and easy to do. Continue rinsing for 5 minutes. Call a POISON CENTRE or a doctor. — IF SWALLOWED: Rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call a POISON CENTRE or a doctor. — IF INHALED: If symptoms occur call a POISON CENTRE or a doctor. — If medical advice is needed, have product container or label at hand. 5.4. Instructions for safe disposal of the product and its packaging — Do not discharge unused product on the ground, into water courses, into pipes (sink, toilets…) nor down the drains. — Dispose of unused product, its packaging and all other waste, in accordance with local regulations. 5.5. Conditions of storage and shelf-life of the product under normal conditions of storage — Shelf-life: 24 months. — Do not store above 30°C. — Protect from direct sunlight. — Keep out of reach of children and non-target animals/pets. 6. OTHER INFORMATION The full titles of the EN standards and legal act referenced in section 5.2 “Risk mitigation measures” are: EN 374 - Protective gloves against dangerous chemicals and micro-organisms EN 16321 - Eye and face protection for occupational use EN 13034 - Protective clothing against liquid chemicals - Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment) Council Directive 98/24/EC of 7 April 1998 on the protection of the health and safety of workers from the risks related to chemical agents at work (fourteenth individual Directive within the meaning of Article 16(1) of Directive 89/391/EEC) ( OJ L 131, 5.5.1998, p. 11 ). The full title of the legal act mentioned in Section 4.2.2 ‘Use-specific risk mitigation measures’ is: Commission Regulation (EU) 2020/749 of 4 June 2020 amending Annex III to Regulation (EC) No 396/2005 of the European Parliament and of the Council as regards maximum residue levels for chlorate in or on certain products ( OJ L 178, 8.6.2020, p. 7–20 ). 7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 6 7.1. Trade name(s), authorisation number and specific composition of each individual product Trade name(s) Mould & Mildew Remover 1 Market area: EU Authorisation number EU-0029289-0012 1-6 Common name IUPAC name Function CAS number EC number Content (%) Active chlorine released from sodium hypochlorite active substance 0,94 % (w/w) Sodium hypochlorite Sodium hypochlorite releaser 7681-52-9 231-668-3 6,83 % (w/w) Sodium hydroxide Sodium hydroxide Non-Active substance 1310-73-2 215-185-5 0,2 % (w/w) Amines, C12-14 (even numbered)-alkyldimethyl, N-oxides Amines, C12-14 (even numbered)-alkyldimethyl, N-oxides Non-Active substance 308062-28-4 931-292-6 0,14 % (w/w) 7.2. Trade name(s), authorisation number and specific composition of each individual product Trade name(s) Mould & Mildew Remover 2 Market area: EU Authorisation number EU-0029289-0013 1-6 Common name IUPAC name Function CAS number EC number Content (%) Active chlorine released from sodium hypochlorite active substance 0,94 % (w/w) Sodium hypochlorite Sodium hypochlorite releaser 7681-52-9 231-668-3 6,83 % (w/w) Sodium hydroxide Sodium hydroxide Non-Active substance 1310-73-2 215-185-5 0,15 % (w/w) Amines, C12-14 (even numbered)-alkyldimethyl, N-oxides Amines, C12-14 (even numbered)-alkyldimethyl, N-oxides Non-Active substance 308062-28-4 931-292-6 0,14 % (w/w) 7.3. Trade name(s), authorisation number and specific composition of each individual product Trade name(s) Mould & Mildew Remover 3 Market area: EU Authorisation number EU-0029289-0014 1-6 Common name IUPAC name Function CAS number EC number Content (%) Active chlorine released from sodium hypochlorite active substance 0,94 % (w/w) Sodium hypochlorite Sodium hypochlorite releaser 7681-52-9 231-668-3 6,83 % (w/w) Sodium hydroxide Sodium hydroxide Non-Active substance 1310-73-2 215-185-5 0,15 % (w/w) Amines, C12-14 (even numbered)-alkyldimethyl, N-oxides Amines, C12-14 (even numbered)-alkyldimethyl, N-oxides Non-Active substance 308062-28-4 931-292-6 0,14 % (w/w) 1. META SPC 7 ADMINISTRATIVE INFORMATION 1.1. Meta SPC 7 identifier Identifier Meta SPC: Meta SPC G 1.2. Suffix to the authorisation number Number 1-7 1.3. Product type(s) Product type(s) PT02: Disinfectants and algaecides not intended for direct application to humans or animals PT04: Food and feed area 2. META SPC 7 COMPOSITION 2.1. Qualitative and quantitative information on the composition of the meta SPC 7 Common name IUPAC name Function CAS number EC number Content (%) Active chlorine released from sodium hypochlorite active substance 2,46 - 2,46 % (w/w) Sodium hypochlorite Sodium hypochlorite releaser 7681-52-9 231-668-3 17,79 - 17,79 % (w/w) Sodium hydroxide Sodium hydroxide Non-Active substance 1310-73-2 215-185-5 0,2 - 0,2 % (w/w) 2.2. Type(s) of formulation of the meta SPC 7 Formulation type(s) Ready to use liquid 3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 7 Hazard statements H290: May be corrosive to metals. H314: Causes severe skin burns and eye damage. H410: Very toxic to aquatic life with long lasting effects. EUH071: Corrosive to the respiratory tract. Precautionary statements P234: Keep only in original packaging. P273: Avoid release to the environment. P280: Wear protective gloves/protective clothing/eye protection/face protection.. P301+P330+P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting. P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P363: Wash contaminated clothing before reuse. P390: Absorb spillage to prevent material damage. P406: Store in a corrosive resistant container with a resistant inner liner. P260: Do not breathe vapours. P260: Do not breathe spray. P310: Immediately call a POISON CENTER. P405: Store locked up. P501: Dispose of contents in accordance with local/regional regulations. P501: Dispose of container in accordance with local/regional regulations. 4. AUTHORISED USE(S) OF THE META SPC 4.1. Use description Table 1. Hard non porous surface disinfection Product type PT02: Disinfectants and algaecides not intended for direct application to humans or animals PT04: Food and feed area Where relevant, an exact description of the authorised use - Target organism(s) (including development stage) Scientific name: bacteria Common name: Bacteria Development stage: Other Scientific name: Fungi Common name: fungi Development stage: Other Scientific name: Yeast Common name: Yeast Development stage: Other Scientific name: Virus Common name: Virus Development stage: Other Field(s) of use indoor use Indoor (domestic, institutional and medical areas) Application method(s) Method: spraying Detailed description: - Application rate(s) and frequency Application rate: - Ready to use product. Number and timing of application: - Bacteria, yeast, fungi and virus: 5 min Room temperature Category(ies) of users professional Pack sizes and packaging material 500 mL, 750 mL, 1L opaque HDPE bottles with TS6 spray trigger or TS6 foam trigger. 4.1.1. Use-specific instructions See general directions for use. 4.1.2. Use-specific risk mitigation measures See general directions for use. PT4: For food commodities, ensure that the concentration of chlorate present in food does not exceed the MRL values set in Regulation 2020/749. See section 6 for the full reference to this act. 4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use. 4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use. 4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use. 5. GENERAL DIRECTIONS FOR USE OF THE META SPC 7 5.1. Instructions for use — Comply with the instruction for use. — For healthcare settings: clean carefully the surfaces before application of the product. — Respect the conditions of use of the product (concentration, contact time, temperature, etc.). — Ensure complete wetting on the surfaces, leave for appropriate contact time. — Product to be applied to hard surfaces by spraying. The nozzle of the product should be turned to the ‘ ‘on’ ’ position. Users are advised to spray product 20-25cm away from surfaces, whilst keeping product upright. — Rinse treated surfaces after application. — Products should not be used in conjunction with acids or ammonia. — Inform the registration holder if the treatment is ineffective. 5.2. Risk mitigation measures For professional users: Wear personal protective equipment during application and post-application of the products: — chemical resistant gloves classified under EN 374 or equivalent ; — chemical goggles classified under EN 16321 or equivalent ; — protective coverall in accordance with EN 13034 or equivalent; (material to be specified by the authorisation holder within the product information) — Respiratory protective equipment (only during spraying) in accordance with EN 14387 or equivalent The full texts of the EN standards are available in Section 6 This is without prejudice to the application of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work. See section 6 for the full reference to this act. For the bystander: — Do not be present in the treatment area during application by spraying. If it is necessary to be present, wear same RPE and PPE as the user. — For secondary exposure of general public: — By-standers shall not be present during application by spraying — It shall be ensured that bystanders and general public do not touch the surface until the surface is rinsed and dry. 5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment — IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor. — IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112/ambulance for medical assistance. — Information to Healthcare personnel/doctor: — The eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid. — IF SWALLOWED: Immediately rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call 112/ambulance for medical assistance. — IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing. — If symptoms: Call 112/ambulance for medical assistance. — If no symptoms: Call a POISON CENTRE or a doctor. — Keep the container or label available. 5.4. Instructions for safe disposal of the product and its packaging — Do not discharge unused product on the ground, into water courses, into pipes (sink, toilets…) nor down the drains. — Dispose of unused product, its packaging and all other waste, in accordance with local regulations. 5.5. Conditions of storage and shelf-life of the product under normal conditions of storage — Shelf-life: 24 months. — Do not store above 30°C. — Protect from direct sunlight. 6. OTHER INFORMATION The full titles of the EN standards and legal act referenced in section 5.2 “Risk mitigation measures” are: EN 374 - Protective gloves against dangerous chemicals and micro-organisms EN 16321 - Eye and face protection for occupational use EN 13034 - Protective clothing against liquid chemicals - Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment) EN 14387 - Respiratory protective devices - Gas filter(s) and combined filter(s)- Requirements, testing, marking Council Directive 98/24/EC of 7 April 1998 on the protection of the health and safety of workers from the risks related to chemical agents at work (fourteenth individual Directive within the meaning of Article 16(1) of Directive 89/391/EEC) ( OJ L 131, 5.5.1998, p. 11 ). Commission Regulation (EU) 2020/749 of 4 June 2020 amending Annex III to Regulation (EC) No 396/2005 of the European Parliament and of the Council as regards maximum residue levels for chlorate in or on certain products ( OJ L 178, 8.6.2020, p. 7–20 ). 7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 7 7.1. Trade name(s), authorisation number and specific composition of each individual product Trade name(s) Anti-bacterial Mould & Mildew Remover 1 Market area: EU Authorisation number EU-0029289-0015 1-7 Common name IUPAC name Function CAS number EC number Content (%) Active chlorine released from sodium hypochlorite active substance 2,46 % (w/w) Sodium hypochlorite Sodium hypochlorite releaser 7681-52-9 231-668-3 17,79 % (w/w) Sodium hydroxide Sodium hydroxide Non-Active substance 1310-73-2 215-185-5 0,2 % (w/w) 7.2. Trade name(s), authorisation number and specific composition of each individual product Trade name(s) Anti-bacterial Mould & Mildew Remover 2 Market area: EU Authorisation number EU-0029289-0016 1-7 Common name IUPAC name Function CAS number EC number Content (%) Active chlorine released from sodium hypochlorite active substance 2,46 % (w/w) Sodium hypochlorite Sodium hypochlorite releaser 7681-52-9 231-668-3 17,79 % (w/w) Sodium hydroxide Sodium hydroxide Non-Active substance 1310-73-2 215-185-5 0,2 % (w/w) 7.3. Trade name(s), authorisation number and specific composition of each individual product Trade name(s) Black Mould Remover 1 Market area: EU Authorisation number EU-0029289-0017 1-7 Common name IUPAC name Function CAS number EC number Content (%) Active chlorine released from sodium hypochlorite active substance 2,46 % (w/w) Sodium hypochlorite Sodium hypochlorite releaser 7681-52-9 231-668-3 17,79 % (w/w) Sodium hydroxide Sodium hydroxide Non-Active substance 1310-73-2 215-185-5 0,2 % (w/w) 1. META SPC 8 ADMINISTRATIVE INFORMATION 1.1. Meta SPC 8 identifier Identifier Meta SPC: Meta SPC H 1.2. Suffix to the authorisation number Number 1-8 1.3. Product type(s) Product type(s) PT04: Food and feed area PT02: Disinfectants and algaecides not intended for direct application to humans or animals 2. META SPC 8 COMPOSITION 2.1. Qualitative and quantitative information on the composition of the meta SPC 8 Common name IUPAC name Function CAS number EC number Content (%) Active chlorine released from sodium hypochlorite active substance 2,09 - 2,09 % (w/w) Sodium hypochlorite Sodium hypochlorite releaser 7681-52-9 231-668-3 15,1 - 15,1 % (w/w) Sodium hydroxide Sodium hydroxide Non-Active substance 1310-73-2 215-185-5 0,1 - 0,1 % (w/w) 2.2. Type(s) of formulation of the meta SPC 8 Formulation type(s) Ready to use liquid 3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 8 Hazard statements H290: May be corrosive to metals. H315: Causes skin irritation. H319: Causes serious eye irritation. H412: Harmful to aquatic life with long lasting effects. EUH206: Warning! Do not use together with other products. May release dangerous gases (chlorine). Precautionary statements P101: If medical advice is needed, have product container or label at hand. P102: Keep out of reach of children. P234: Keep only in original packaging. P264: Wash hands thoroughly after handling. P273: Avoid release to the environment. P280: Wear protective gloves/protective clothing/eye protection/face protection.. P302+P352: IF ON SKIN: Wash with plenty of soap and water. P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P337+P313: If eye irritation persists: Get medical advice. P390: Absorb spillage to prevent material damage. P406: Store in a corrosive resistant container with a resistant inner liner. P103: Read carefully and follow all instructions. P332+P313: If skin irritation occurs: Get medical advice. P362+P364: Take off contaminated clothing and wash it before reuse. P310: Immediately call a POISON CENTER. P501: Dispose of contents in accordance with local/regional regulations. P501: Dispose of container in accordance with local/regional regulations. 4. AUTHORISED USE(S) OF THE META SPC 4.1. Use description Table 1. Hard non porous surface disinfection Product type PT02: Disinfectants and algaecides not intended for direct application to humans or animals Where relevant, an exact description of the authorised use - Target organism(s) (including development stage) Scientific name: Bacteria Common name: Bacteria Development stage: Other Scientific name: Yeast Common name: Yeast Development stage: Other Scientific name: Fungi Common name: fungi Development stage: Other Scientific name: Virus Common name: Virus Development stage: Virus Field(s) of use indoor use Indoor (domestic, institutional and medical areas) Application method(s) Method: spraying Detailed description: - Application rate(s) and frequency Application rate: - Ready to use product. Number and timing of application: - Contact time: Bacteria, yeast, fungi and virus: 5 min Room temperature Category(ies) of users professional ; general public (non-professional) Pack sizes and packaging material 500 mL, 750 mL, 1L opaque HDPE bottles with TS6 spray trigger or TS6 foam trigger. 4.1.1. Use-specific instructions See general directions for use. 4.1.2. Use-specific risk mitigation measures For non-professional users: — Product shall be sprayed downward — Wash hand after use — Avoid contact with skin and eyes For secondary exposure of general public: — It shall be ensured that bystanders and general public do not touch the surface until the surface is rinsed and dry. 4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use. 4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use. 4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use. 4.2. Use description Table 2. Hard non porous surface disinfection Product type PT04: Food and feed area Target organism(s) (including development stage) Scientific name: Bacteria Common name: Bacteria Development stage: Other Scientific name: Yeast Common name: Yeast Development stage: Other Scientific name: Fungi Common name: fungi Development stage: Other Scientific name: Virus Common name: Virus Development stage: Virus Field(s) of use indoor use Indoor (domestic, institutional and medical areas) Application method(s) Method: spraying Detailed description: - Application rate(s) and frequency Application rate: - Ready to use product. Number and timing of application: - Contact time: Bacteria, yeast, fungi and virus: 5 min Room temperature Category(ies) of users professional Pack sizes and packaging material 500 mL, 750 mL, 1L opaque HDPE bottles with TS6 spray trigger or TS6 foam trigger. 4.2.1. Use-specific instructions See general directions for use. 4.2.2. Use-specific risk mitigation measures See general directions for use. For food commodities, ensure that the concentration of chlorate present in food does not exceed the MRL values set in Regulation 2020/749. See section 6 for the full reference to this act. 4.2.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use. 4.2.4. Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use. 4.2.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use. 5. GENERAL DIRECTIONS FOR USE OF THE META SPC 8 5.1. Instructions for use — Comply with the instruction for use. — For healthcare settings: clean carefully the surfaces before application of the product. — Respect the conditions of use of the product (concentration, contact time, temperature, etc.). — Ensure complete wetting on the surfaces, leave for appropriate contact time. — Product is to be applied by spraying. The nozzle of the product should be turned to the ‘on’ position. Users are advised to spray product 20-25cm away from surfaces. — Rinse treated surfaces after application. — Products should not be used in conjunction with acids or ammonia. — Inform the registration holder if the treatment is ineffective. 5.2. Risk mitigation measures For professional users: Wear personal protective equipment during application and post-application of the products: — chemical resistant gloves classified under EN 374 or equivalent ; — chemical goggles classified under EN 16321 or equivalent ; — protective coverall in accordance with EN 13034 or equivalent; (material to be specified by the authorisation holder within the product information) The full texts of the EN standards are available in Section 6 This is without prejudice to the application of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work. See section 6 for the full reference to this act. 5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment — IF ON SKIN: Take off all contaminated clothing and wash it before reuse. Wash skin with water. If skin irritation occurs: Get medical advice. — IF IN EYES: Rinse with water. Remove contact lenses, if present and easy to do. Continue rinsing for 5 minutes. Call a POISON CENTRE or a doctor. — IF SWALLOWED: Rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call a POISON CENTRE or a doctor. — IF INHALED: If symptoms occur call a POISON CENTRE or a doctor. — If medical advice is needed, have product container or label at hand. 5.4. Instructions for safe disposal of the product and its packaging — Do not discharge unused product on the ground, into water courses, into pipes (sink, toilets…) nor down the drains. — Dispose of unused product, its packaging and all other waste, in accordance with local regulations. 5.5. Conditions of storage and shelf-life of the product under normal conditions of storage — Shelf-life: 24 months. — Do not store above 30°C. — Protect from direct sunlight. — Keep out of reach of children and non-target animals/pets. 6. OTHER INFORMATION The full titles of the EN standards and legal act referenced in section 5.2 “Risk mitigation measures” are: EN 374 - Protective gloves against dangerous chemicals and micro-organisms EN 16321 - Eye and face protection for occupational use EN 13034 - Protective clothing against liquid chemicals - Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment) Council Directive 98/24/EC of 7 April 1998 on the protection of the health and safety of workers from the risks related to chemical agents at work (fourteenth individual Directive within the meaning of Article 16(1) of Directive 89/391/EEC) ( OJ L 131, 5.5.1998, p. 11 ). The full title of the legal act mentioned in Section 4.2.2 ‘Use-specific risk mitigation measures’ is: Commission Regulation (EU) 2020/749 of 4 June 2020 amending Annex III to Regulation (EC) No 396/2005 of the European Parliament and of the Council as regards maximum residue levels for chlorate in or on certain products ( OJ L 178, 8.6.2020, p. 7–20 ). 7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 8 7.1. Trade name(s), authorisation number and specific composition of each individual product Trade name(s) Black Mould remover 2 Market area: EU Authorisation number EU-0029289-0018 1-8 Common name IUPAC name Function CAS number EC number Content (%) Active chlorine released from sodium hypochlorite active substance 2,09 % (w/w) Sodium hypochlorite Sodium hypochlorite releaser 7681-52-9 231-668-3 15,1 % (w/w) Sodium hydroxide Sodium hydroxide Non-Active substance 1310-73-2 215-185-5 0,1 % (w/w) 7.2. Trade name(s), authorisation number and specific composition of each individual product Trade name(s) Bleach & Hygiene Market area: EU Authorisation number EU-0029289-0019 1-8 Common name IUPAC name Function CAS number EC number Content (%) Active chlorine released from sodium hypochlorite active substance 2,09 % (w/w) Sodium hypochlorite Sodium hypochlorite releaser 7681-52-9 231-668-3 15,1 % (w/w) Sodium hydroxide Sodium hydroxide Non-Active substance 1310-73-2 215-185-5 0,1 % (w/w) 7.3. Trade name(s), authorisation number and specific composition of each individual product Trade name(s) Anti-bacterial Mould & Mildew Remover 3 Market area: EU Authorisation number EU-0029289-0020 1-8 Common name IUPAC name Function CAS number EC number Content (%) Active chlorine released from sodium hypochlorite active substance 2,09 % (w/w) Sodium hypochlorite Sodium hypochlorite releaser 7681-52-9 231-668-3 15,1 % (w/w) Sodium hydroxide Sodium hydroxide Non-Active substance 1310-73-2 215-185-5 0,1 % (w/w) 1. META SPC 9 ADMINISTRATIVE INFORMATION 1.1. Meta SPC 9 identifier Identifier Meta SPC: Meta SPC I 1.2. Suffix to the authorisation number Number 1-9 1.3. Product type(s) Product type(s) PT02: Disinfectants and algaecides not intended for direct application to humans or animals 2. META SPC 9 COMPOSITION 2.1. Qualitative and quantitative information on the composition of the meta SPC 9 Common name IUPAC name Function CAS number EC number Content (%) Active chlorine released from sodium hypochlorite active substance 5,81 - 5,81 % (w/w) Sodium hypochlorite Sodium hypochlorite releaser 7681-52-9 231-668-3 42,07 - 42,07 % (w/w) Sodium hydroxide Sodium hydroxide Non-Active substance 1310-73-2 215-185-5 1 - 2 % (w/w) 2.2. Type(s) of formulation of the meta SPC 9 Formulation type(s) Ready to use liquid 3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 9 Hazard statements H290: May be corrosive to metals. H314: Causes severe skin burns and eye damage. H410: Very toxic to aquatic life with long lasting effects. EUH031: Contact with acids liberates toxic gas. EUH206: Warning! Do not use together with other products. May release dangerous gases (chlorine). Precautionary statements P101: If medical advice is needed, have product container or label at hand. P102: Keep out of reach of children. P234: Keep only in original packaging. P264: Wash hands thoroughly after handling. P273: Avoid release to the environment. P280: Wear protective gloves/protective clothing/eye protection/face protection. P301+P330+P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting. P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P363: Wash contaminated clothing before reuse. P390: Absorb spillage to prevent material damage. P391: Collect spillage. P406: Store in a corrosive resistant container with a resistant inner liner. P103: Read carefully and follow all instructions. P260: Do not breathe vapours. P260: Do not breathe spray. P310: Immediately call a POISON CENTER. P405: Store locked up. P501: Dispose of contents in accordance with local/regional regulations. P501: Dispose of container in accordance with local/regional regulations. 4. AUTHORISED USE(S) OF THE META SPC 4.1. Use description Table 1. Toilet bowl disinfection Product type PT02: Disinfectants and algaecides not intended for direct application to humans or animals Where relevant, an exact description of the authorised use - Target organism(s) (including development stage) Scientific name: Bacteria Common name: Bacteria Development stage: Other Scientific name: Fungi Common name: fungi Development stage: Other Scientific name: Yeast Common name: Yeast Development stage: other Field(s) of use indoor use Indoor (domestic, institutional and medical areas) Application method(s) Method: pouring Detailed description: - Application rate(s) and frequency Application rate: 80 ml/toilet bowl Ready to use product. Number and timing of application: - Contact time: Bacteria, yeast and fungi: 15 minutes Room temperature Category(ies) of users professional ; general public (non-professional) Pack sizes and packaging material 500 mL, 680 mL, 700 mL, 750 mL opaque HDPE bottles. Plastic (polypropylene) cap. Plastic insert plug and bent bottle neck (LDPP). CLP regulation apply, as products are classified H314, child proof closure and a tactile warning are required for packaging of non professional users. 4.1.1. Use-specific instructions See general directions for use. 4.1.2. Use-specific risk mitigation measures See general directions for use. 4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use. 4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use. 4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use. 5. GENERAL DIRECTIONS FOR USE OF THE META SPC 9 5.1. Instructions for use — Comply with the instruction for use. — For healthcare settings: clean carefully the surfaces before application of the product. — Respect the conditions of use of the product (concentration, contact time, temperature, etc.). — Squeeze and apply slowly all around the inside of the bowl, allowing enough liquid to cover the bowl completely. — The recommended dose is approximately 80 mL. — Products should not be used in conjunction with acids or ammonia. — No other cleaning agents should be used in conjunction with the product. — Inform the registration holder if the treatment is ineffective. 5.2. Risk mitigation measures For professional users: Wear personal protective equipment during application of the products: — chemical resistant gloves classified under EN 374 or equivalent; — chemical goggles classified under EN 16321 or equivalent ; — protective coverall in accordance with EN 13034 or equivalent; (material to be specified by the authorisation holder within the product information) The full texts of the EN standards are available in Section 6. This is without prejudice to the application of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work. See section 6 for the full reference to this act. For non-professional users: — Do not touch the product during application — Wash hands after use — Avoid contact with skin and eyes — Avoid splashes during application 5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment — IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor. — IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112/ambulance for medical assistance. — Information to Healthcare personnel/doctor: — The eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid — IF SWALLOWED: Immediately rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call 112/ambulance for medical assistance. — IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing. — If symptoms: Call 112/ambulance for medical assistance. — If no symptoms: Call a POISON CENTRE or a doctor. — If medical advice is needed, have product container or label at hand. 5.4. Instructions for safe disposal of the product and its packaging — Do not discharge unused product on the ground, into water courses, into pipes (sink, toilets…) nor down the drains. — Dispose of unused product, its packaging and all other waste, in accordance with local regulations. 5.5. Conditions of storage and shelf-life of the product under normal conditions of storage — Shelf-life: 24 months. — Do not store above 30°C. — Protect from direct sunlight. — Keep out of reach of children and non-target animals/pets. 6. OTHER INFORMATION The full titles of the EN standards and legal act referenced in section 5.2 “Risk mitigation measures” are: EN 374 - Protective gloves against dangerous chemicals and micro-organisms EN 16321 - Eye and face protection for occupational use EN 13034 - Protective clothing against liquid chemicals - Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment) Council Directive 98/24/EC of 7 April 1998 on the protection of the health and safety of workers from the risks related to chemical agents at work (fourteenth individual Directive within the meaning of Article 16(1) of Directive 89/391/EEC) ( OJ L 131, 5.5.1998, p. 11 ). 7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 9 7.1. Trade name(s), authorisation number and specific composition of each individual product Trade name(s) Toilet Bowl Bleach Market area: EU Authorisation number EU-0029289-0021 1-9 Common name IUPAC name Function CAS number EC number Content (%) Active chlorine released from sodium hypochlorite active substance 5,81 % (w/w) Sodium hypochlorite Sodium hypochlorite releaser 7681-52-9 231-668-3 42,07 % (w/w) Sodium hydroxide Sodium hydroxide Non-Active substance 1310-73-2 215-185-5 2 % (w/w)