Article 1
Annex I to Regulation (EU) 2019/1021 is amended in accordance with the Annex to this Regulation.
Commission Delegated Regulation (EU) 2025/843 of 5 May 2025 amending Annex I to Regulation (EU) 2019/1021 of the European Parliament and of the Council as regards UV-328
Data as of 2026-07-04 · Compiled from an official source version. Later amendments or repeals may not be reflected; the official text prevails. · Read the official text ↗
Annex I to Regulation (EU) 2019/1021 is amended in accordance with the Annex to this Regulation.
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union .
ANNEX In Part A of Annex I to Regulation (EU) 2019/1021, the following entry is added: Substance CAS No EC No Specific exemption on intermediate use or other specification ‘2-(2 H -benzotriazol-2-yl)-4,6-di- tert -pentylphenol (UV-328) 25973-55-1 247-384-8 1. For the purposes of this entry, Article 4(1), point (b), shall apply to concentrations of UV-328 equal to or below: (a) 100 mg/kg (0,01 % by weight) from 4 August 2025; (b) 10 mg/kg (0,001 % by weight) from 4 August 2027; (c) 1 mg/kg (0,0001 % by weight) from 4 August 2029; where they are present in substances, mixtures or articles. 2. By way of derogation, the placing on the market of UV-328 present in articles and the use of such articles shall be allowed for the following purposes: (a) in land-based motor vehicles, until 4 August 2030; (b) in industrial coating for land-based motor vehicles, engineering machines, rail transportation vehicles, and in heavy-duty coatings for large steel structures, until 4 August 2030; (c) in mechanical separators in blood collection tubes, until 4 August 2030; (d) in triacetyl cellulose film in polarisers, until 4 August 2030; (e) in photographic paper, until 4 August 2030; (f) in civilian and military aircrafts, until 4 August 2030; (g) in spare parts for any of the following: (i) land-based motor vehicles; (ii) stationary industrial machines for use in agriculture, forestry and construction; (iii) liquid crystal displays in instruments for analysis, measurements, control, monitoring, testing, production and inspection, other than for medical applications; where UV-328 was initially used in their production, until the end of their service life or 31 December 2043, whichever comes earlier; (h) in spare parts for any of the following: (i) liquid crystal displays in devices within the scope of Regulation (EU) 2017/745, and within the scope of Regulation (EU) 2017/746 of the European Parliament and of the Council ( *1 ) ; (ii) liquid crystal displays in instruments for analysis, measurements, control, testing, production and inspection; where UV-328 was initially used in their production, until the end of their service life; (i) in spare parts for civilian and military aircrafts where UV-328 was initially used in their production, until 31 December 2030. 3. Articles containing UV-328 already in use in the Union before or on the date of expiry of the relevant exemption laid down in point 2(a) to (i) may continue to be used. ( *1 ) Regulation (EU) 2017/746 of the European Parliament and of the Council of 5 April 2017 on in vitro diagnostic medical devices and repealing Directive 98/79/EC and Commission Decision 2010/227/EU ( OJ L 117, 5.5.2017, p. 176 , ELI: http://data.europa.eu/eli/reg/2017/746/oj ).’
Source: EUR-Lex (Publications Office of the EU), © European Union, reuse permitted under Commission Decision 2011/833/EU.