My bookmarksSign up free

Commission Implementing Regulation (EU) 2025/1952 CHAPTER IV — ERADICATION AND CONTAINMENT MEASURES

Article 9–Article 10 · 2 articles

Compiled from an official source version. Later amendments or repeals may not be reflected; the official text prevails. · Read the official text ↗

Eradication measures

Article 9

1.   In order to eradicate the specified pest, the competent authorities shall take the following measures in the demarcated areas: (a) the immediate felling of infested plants and plants with symptoms caused by the specified pest, and the complete removal of their roots if larval galleries are observed below the root collar of the infested plant; in cases where the infested plants were found outside the flying period of the specified pest, the felling and removal shall be carried out before the start of the next flying period; (b) the felling of all specified plants within a radius of at least 100 m around infested plants and the examination of those specified plants for any sign of infestation; (c) removal, examination and safe disposal of plants felled in accordance with points (a) and (b), taking all necessary precautions to avoid spreading of the specified pest during and after felling; (d) removal, examination and safe disposal of the wood, bark and wood packaging material associated with the infestation, taking all necessary precautions to avoid spreading of the specified pest; (e) prohibition of any movement of potentially infested specified plants, specified wood and wood packaging material out of the demarcated area; (f) investigation of the origin of the infestation by tracing back the plants, wood, bark and other objects associated with the infestation, and examination thereof for any sign of infestation, including targeted destructive sampling; (g) replacement of specified plants by other non-susceptible plant species, where appropriate; (h) prohibition of the presence of new specified plants in the open air in the area referred to in point (b), except for places of production referred to in Annex VIII, point 17.2, of Regulation (EU) 2019/2072 and sentinel plants; (i) raising public awareness of the threat of the specified pest and the eradication measures set out in this Article, including the conditions regarding movement of specified plants from the demarcated area; (j) where necessary, specific measures to address any particularity or complication that could reasonably be expected to prevent, hinder or delay eradication, in particular those related to the accessibility and adequate eradication of all plants that are infested or suspected of infestation, irrespective of their location, public or private ownership or the person or entity responsible for them; (k) any other measure which may contribute to the eradication of the specified pest, in accordance with International Standard for Phytosanitary Measure (‘ISPM’) No 9  ( 9 ) and to applying a systems approach in accordance with the principles set out in ISPM No 14  ( 10 ) . In the case of the first subparagraph, point (a), where it is not possible to remove deeply seated stumps and surface roots, they shall be ground to at least 40 cm below surface level or covered by insect-proof material. 2.   The annual official surveys within a width of at least 1 km around the places of production referred to in point 17.2 of Annex VIII to Implementing Regulation (EU) 2019/2072 shall be based on the Authority’s General guidelines for statistically sound and risk-based surveys of plant pests, and the survey design and sampling scheme used shall be able to identify, with at least 99 % confidence level, a level of presence of infested plants of 1 %. 3.   In case of movement of specified wood and wood packaging material and bark outside of the demarcated area and if no treatment or processing facilities are available within the demarcated area, the specified wood and wood packaging material and bark shall be moved to the nearest suitable facility outside the demarcated area, to ensure immediate treatment or processing in accordance with points 30-32 of Annex VIII to Implementing Regulation (EU) 2019/2072. That movement shall be carried out under official control and under closed conditions, in such a manner to ensure that the specified pest cannot spread. The responsible official body shall carry out annual surveys at appropriate times for the presence of the specified pest through inspections on host plants within at least a width of 1 km of that treatment or processing facility. 4.   By way of derogation from paragraph 1, first subparagraph, point (b), where a competent authority concludes that felling is inappropriate for a limited number of individual plants, due to their particular social, cultural or environmental value, those individual plants shall be subject to a monthly individual examination for any sign of infestation and measures alternative to felling ensuring high level of protection shall be taken to prevent any possible spread of the specified pest from those plants.

Containment measures

Article 10

1.   In the infested zones of the demarcated areas for containment, as listed in Annex I, the competent authorities shall take all of the following measures: (a) felling of infested plants and plants with symptoms caused by the specified pest, and complete removal of their roots if larval galleries are observed below the root collar of the infested plant; (b) removal, examination and safe disposal of plants felled in accordance with point (a), taking the necessary precautions to avoid spreading of the specified pest during and after felling; (c) prohibition of any movement of potentially infested specified plants, specified wood and wood packaging material out of the demarcated area; (d) where appropriate, replacement of specified plants by other non-susceptible plants; (e) prohibition of the presence in the infested zone of new specified plants in the open air, except for places of production referred to in point 17.2 of Annex VIII to Implementing Regulation (EU) 2019/2072 and planting of sentinel plants; (f) raising public awareness of the threat of the specified pest and the containment measures set out in this Article, including the conditions regarding movement of specified plants out of the demarcated area established pursuant to Article 5; (g) where necessary, specific measures to address any other issue or complication that could reasonably be expected to prevent, hinder or delay containment, in particular those related to the accessibility and adequate felling and destruction of all plants that are infested or suspected of infestation, irrespective of their location, ownership or the person responsible for them; (h) any other measure, which may help contain the specified pest. In the case of the first subparagraph, point (a), felling activities shall start immediately, however in cases where the infested plants were found outside the flying period of the specified pest, the felling and removal shall be carried out before the start of the next flying period. Where it is not possible to remove deeply seated stumps and surface roots, they shall be ground to at least 40 cm below surface level or covered by insect-proof material. 2.   The annual official surveys within a width of at least 1 km around the places of production referred to in point 17.2 of Annex VIII to Implementing Regulation (EU) 2019/2072 shall be based on the Authority’s General guidelines for statistically sound and risk-based surveys of plant pests, and the survey design and sampling scheme used shall be able to identify, with at least 99 % confidence level, a level of presence of infested plants of 1 %. The responsible official body shall carry out annual surveys at appropriate times for the presence of the specified pest through inspections on host plants within at least a width of 1 km of that treatment or processing facility. 3.   In case of movement of specified wood and wood packaging material and bark outside of the demarcated area and from the infested zone into the buffer zone, if no treatment or processing facilities are available within the demarcated area, the specified wood, wood packaging material and bark shall be moved to the nearest suitable facility outside the demarcated area to ensure immediate treatment or processing in accordance with points 30-32 of Annex VIII to Implementing Regulation (EU) 2019/2072. That movement shall be carried out under official control and under closed conditions, in such a manner to ensure that the specified pest cannot spread. 4.   Where the presence of the specified pest has been officially confirmed in the buffer zone, Articles 17 and 18 of Regulation (EU) 2016/2031 shall apply accordingly.

Back to Commission Implementing Regulation (EU) 2025/1952 — full text

Articles on this page are reproduced verbatim from official open data. See the attribution line.

Source: EUR-Lex (Publications Office of the EU), © European Union, reuse permitted under Commission Decision 2011/833/EU.

What to look at next