My bookmarksSign up free

Commission Implementing Decision (EU) 2026/79 of 12 January 2026 amending Commission Implementing Decision (EU) 2025/165 as regards harmonised standards for seamless steel tubes, butt-welding pipe fittings, copper and copper alloys, unfired pressure vessels, flanges and their joints, industrial valves, and safety devices for protection against excessive pressure, drafted in support of Directive 2014/68/EU of the European Parliament and of the Council

Commission Implementing Decision (EU) 2026/79 of 12 January 2026 amending Commission Implementing Decision (EU) 2025/165 as regards harmonised standards for seamless steel tubes, butt-welding pipe fittings, copper and copper alloys, unfired pressure vessels, flanges and their joints, industrial valves, and safety devices for protection against excessive pressure, drafted in support of Directive 2014/68/EU of the European Parliament and of the Council

Implementing Decision (EU) 2026/79 · Decision · 3 articles

Data as of 2026-07-04 · Compiled from an official source version. Later amendments or repeals may not be reflected; the official text prevails. · Read the official text ↗

Article 1

Annex I to Implementing Decision (EU) 2025/165 is amended in accordance with the Annex to this Decision.

Article 2

This Decision shall enter into force on the day of its publication in the Official Journal of the European Union . Points (1), (3), (5), (7), (9), (11) and (13) of the Annex to this Decision shall apply from 13 July 2027.

Supplementary provisions

ANNEXSupplementary provisions

ANNEX Annex I to Implementing Decision (EU) 2025/165 is amended as follows: (1) row 21 is deleted; (2) the following row is inserted: ‘21a. EN 1591-1:2024 Flanges and their joints – Design rules for gasketed circular flange connections – Part 1: Calculation’; (3) row 53 is deleted; (4) the following row is inserted: ‘53a. EN 10216-2:2024 Seamless steel tubes for pressure purposes – Technical delivery conditions – Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties’; (5) row 70 is deleted; (6) the following row is inserted: ‘70a. EN 10253-4:2025 Butt-welding pipe fittings – Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements’; (7) row 83 is deleted; (8) the following row is inserted: ‘83a. EN 12420:2024 Copper and copper alloys – Forgings’; (9) row 93 is deleted; (10) the following row is inserted: ‘93a. EN 12735-2:2024 Copper and copper alloys – Seamless, round tubes for air conditioning and refrigeration – Part 2: Tubes for equipment’; (11) row 132 is deleted; (12) the following row is inserted: ‘132a. EN 13445-5:2021+A1:2024 Unfired pressure vessels – Part 5: Inspection and testing’; (13) row 187 is deleted; (14) the following row is inserted: ‘187a. EN 16668:2025 Industrial valves – Requirements and testing for metallic valves as pressure accessories’; (15) the following rows are added: ‘196. EN 12163:2024 Copper and copper alloys – Rod for general purposes 197. EN 12164:2024 Copper and copper alloys – Rod for free machining purposes 198. EN 12166:2024 Copper and copper alloys – Wire for general purposes 199. EN 12167:2024 Copper and copper alloys – Profiles and bars for general purposes 200. EN 12168:2024 Copper and copper alloys – Hollow rod for free machining purposes 201. EN 13445-11:2024 Unfired pressure vessels – Part 11: Additional requirements for pressure vessels of titanium and titanium alloys 202. EN 1982:2024 Copper and copper alloys – Ingots and castings 203. EN ISO 4126-10:2024 Safety devices for protection against excessive pressure – Part 10: Sizing of safety valves and bursting discs for gas/liquid two-phase flow’.

Other acts of the same type
2014/785/EU: Council Decision of 7 November 2014 on the position to be adopted, on behalf of the European Union, within the EEA Joint Committee concerning an amendment to Protocol 31 to the EEA Agreement, on cooperation in specific fields outside the four freedoms (consumer protection)2014/786/EU: Council Decision of 7 November 2014 on the position to be adopted, on behalf of the European Union, within the EEA Joint Committee concerning an amendment to Protocol 31 to the EEA Agreement, on cooperation in specific fields outside the four freedoms (Galileo)2014/787/EU: Council Decision of 7 November 2014 on the position to be adopted, on behalf of the European Union, within the EEA Joint Committee concerning an amendment to Protocol 31 to the EEA Agreement, on cooperation in specific fields outside the four freedoms (Satellite Navigation)2014/788/EU: Council Decision of 7 November 2014 on the position to be adopted, on behalf of the European Union, within the EEA Joint Committee concerning an amendment to Protocol 31 to the EEA Agreement, on cooperation in specific fields outside the four freedoms (Copernicus programme)2014/793/EU: Council Decision of 7 November 2014 on the conclusion, on behalf of the European Union, of the Agreement between the European Union and the French Republic concerning the application to the collectivity of Saint-Barthélemy of Union legislation on the taxation of savings and administrative cooperation in the field of taxation2014/794/EU: Council Decision of 7 November 2014 on the position to be taken on behalf of the European Union within the Committee on Cultural Cooperation set up by the Protocol on cultural cooperation to the Free Trade Agreement between the European Union and its Member States, of the one part, and the Republic of Korea, of the other part, as regards the establishment of a list of 15 arbitrators2014/795/EU: Council Implementing Decision of 7 November 2014 extending the application of Implementing Decision 2011/335/EU authorising the Republic of Lithuania to apply a measure derogating from Article 287 of Directive 2006/112/EC on the common system of value added tax2014/831/EU: Council Decision of 7 November 2014 establishing the position to be adopted on behalf of the European Union in the relevant Committees of the United Nations Economic Commission for Europe as regards the proposals for amendments to UN Regulations Nos 4, 6, 11, 13, 13-H, 19, 25, 34, 37, 43, 44, 48, 53, 70, 96, 98, 104, 105, 106, 107, 112, 113, 121, 128, on the new UN Global Technical Regulation on tyres, and on an amendment to Mutual Resolution No 12014/832/EU: Council Decision of 7 November 2014 establishing the position to be adopted on behalf of the European Union in the Administrative Committee of the United Nations Economic Commission for Europe on the draft new Regulation on hydrogen and fuel cell vehicles2014/854/EU: Council Decision of 7 November 2014 establishing the position to be adopted on behalf of the European Union in the Administrative Committee of the United Nations Economic Commission for Europe on the draft new Regulation on pole side impact and on the draft amendment to that RegulationCouncil Decision 2014/821/CFSP of 4 November 2014 concerning the signing and conclusion of the Agreement between the European Union and Ukraine on the status of the European Union Advisory Mission for Civilian Security Sector Reform Ukraine (EUAM Ukraine)2014/771/EU: Commission Implementing Decision of 31 October 2014 on the identification of Universal Business Language version 2.1 for referencing in public procurement Text with EEA relevance

Source: EUR-Lex (Publications Office of the EU), © European Union, reuse permitted under Commission Decision 2011/833/EU.

Contents

What to look at next