Article 1
Open ↗Annex I to Implementing Decision (EU) 2025/165 is amended in accordance with the Annex to this Decision.
Source
Commission Implementing Decision (EU) 2026/2211 of 1 October 2026 amending Commission Implementing Decision (EU) 2025/165 as regards harmonised standards for refrigerating systems and heat pumps, LPG equipment, cryogenic vessels, and welding and brazing, drafted in support of Directive 2014/68/EU of the European Parliament and of the Council
Commission Implementing Decision (EU) 2026/2211 of 1 October 2026 amending Commission Implementing Decision (EU) 2025/165 as regards harmonised standards for refrigerating systems and heat pumps, LPG equipment, cryogenic vessels, and welding and brazing, drafted in support of Directive 2014/68/EU of the European Parliament and of the Council
In force
Version historyWe hold this version only; in force from 2026-10-01.
Data as of 2026-10-08 · Compiled from an official source version. Later amendments or repeals may not be reflected; the official text prevails. · Read the official text ↗
Article 2
Open ↗This Decision shall enter into force on the day of its publication in the Official Journal of the European Union . Point 1 of the Annex to this Decision shall apply from 2 April 2028.
Supplementary provisions
ANNEXSupplementary provisions
Open ↗ANNEX Annex I to Implementing Decision (EU) 2025/165 is amended as follows: (1) Rows 69, 82, 109, 113, 116, 122, 123, 146, 155, 159, 166, 167, 169, 171, 175, 179, 190 and 195 are deleted; (2) the following rows are inserted in sequential order: ‘69a. EN 10253-2:2021+A1:2025 Butt-welding pipe fittings – Part 2: Non alloy and ferritic alloy steels with specific inspection requirements’ ‘82a. EN 12392:2025 Aluminium and aluminium alloys – Wrought products and cast products – Special requirements for products intended for the production of pressure equipment’ ‘109a. EN 12953-2:2025 Shell boilers – Part 2: Materials for pressure parts of boilers and accessories’ ‘113a. EN 12953-6:2024 Shell Boilers – Part 6: Requirements for equipment for the boiler Restriction: Compliance with paragraphs 5.1.6 and 5.3.1 of EN 12953-6:2024 as well as with its Annex F does not confer a presumption of conformity with the essential health and safety requirement set out in point 2.3 of Annex I to Directive 2014/68/EU. Compliance with Annex F to and paragraph 5.6.1.1 of EN 12953-6:2024 does not confer a presumption of conformity with the essential health and safety requirement set out in point 2.10 of Annex I to Directive 2014/68/EU. Compliance with paragraph 5.6.1.1 of EN 12953-6:2024 does not confer a presumption of conformity with the essential health and safety requirement set out in point 2.11.1 of Annex I to Directive 2014/68/EU. Compliance with paragraph 5.6.1.1 of EN 12953-6:2024 does not confer a presumption of conformity with the essential health and safety requirement set out in point 5, second paragraph, point a, of Annex I to Directive 2014/68/EU.’ ‘116a. EN 12953-9:2024 Shell boilers – Part 9: Requirements for limiting devices of the boiler and accessories’ ‘122a. EN ISO 17779:2025 Brazing – Specification and qualification of brazing procedures for metallic materials (ISO 17779:2021)’ ‘123a. EN ISO 24664:2024 Refrigerating systems and heat pumps – Pressure relief devices and their associated piping – Methods for calculation (ISO 24664:2024)’ ‘146a. EN ISO 13585:2024 Brazing – Qualification testing of brazers and brazing operators (ISO 13585:2021)’ ‘155a. EN 14129:2024 LPG Equipment and accessories – Pressure relief valves for LPG pressure vessels’ ‘159a. EN 14222:2021+A1:2025 Stainless steel steam boilers’ ‘166a. EN 14585:2024 Corrugated metal hose assemblies for pressure applications’ ‘167a. EN 14917:2021+A1:2026 Metal bellows expansion joints for pressure applications’ ‘169a. EN ISO 15493:2003 Plastics piping systems for industrial applications – Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) – Specifications for components and the system – Metric series (ISO 15493:2003) EN ISO 15493:2003/A1:2017 EN ISO 15493:2003/A11:2025’ ‘171a. EN ISO 15613:2025 Specification and qualification of welding procedures for metallic materials – Qualification based on a pre-production welding test (ISO 15613:2025)’ ‘175a. EN ISO 15614-5:2024 Specification and qualification of welding procedures for metallic materials – Welding procedure test – Part 5: Arc welding of titanium, zirconium and their alloys (ISO 15614-5:2024)’ ‘179a. EN ISO 15614-11:2025 Specification and qualification of welding procedures for metallic materials – Welding procedure test – Part 11: Electron and laser beam welding (ISO 15614-11:2025)’ ‘190a. EN ISO 21009-2:2024 Cryogenic vessels – Static vacuum-insulated vessels – Part 2: Operational requirements (ISO 21009-2:2024)’ ‘195a. EN ISO 21922:2021 Refrigerating systems and heat pumps – Valves – Requirements, testing and marking (ISO 21922:2021) EN ISO 21922:2021/A1:2024’ (3) the following rows are added: ‘204. EN 14071:2024 LPG equipment and accessories – Pressure relief valves for LPG pressure vessels – Ancillary equipment’ ‘205. EN ISO 14732:2025 Welding personnel – Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials (ISO 14732:2025)’
Other acts of the same type
Commission Decision of 10 August 2010 establishing the European Regulators Group for Postal Services Text with EEA relevance2010/436/EU: Commission Decision of 9 August 2010 implementing Council Decision 2000/258/EC as regards proficiency tests for the purposes of maintaining authorisations of laboratories to carry out serological tests to monitor the effectiveness of rabies vaccines (notified under document C(2010) 5421) Text with EEA relevance2010/464/CFSP: Council Decision 2010/464/CFSP of 6 August 2010 on the signing and conclusion of the Agreement between the European Union and the Republic of Uganda on the Status of the European Union-led Mission in Uganda2010/690/EU: Commission Decision of 4 August 2010 on State aid C 40/08 (ex N 163/08) implemented by Poland for PZL Hydral S.A. (notified under document C(2010) 5406) Text with EEA relevance2010/453/EU: Commission Decision of 3 August 2010 establishing guidelines concerning the conditions of inspections and control measures, and on the training and qualification of officials, in the field of human tissues and cells provided for in Directive 2004/23/EC of the European Parliament and of the Council (notified under document C(2010) 5278) Text with EEA relevance2010/566/EU: Decision No 1/2010 of the EU-Algeria Association Council of 3 August 2010 amending Article 15(7) of Protocol 6 to the Euro-Mediterranean Agreement establishing an Association between the European Community and its Member States, of the one part, and the People’s Democratic Republic of Algeria, of the other part, concerning the definition of the concept of ‘originating products’ and methods of administrative cooperation2010/437/CFSP: Council Decision 2010/437/CFSP of 30 July 2010 amending Joint Action 2008/851/CFSP on a European Union military operation to contribute to the deterrence, prevention and repression of acts of piracy and armed robbery off the Somali coast2010/419/: Commission Decision of 28 July 2010 renewing the authorisation for continued marketing of products containing, consisting of, or produced from genetically modified maize Bt11 (SYN-BTØ11-1), authorising foods and food ingredients containing or consisting of field maize Bt11 (SYN-BTØ11-1) pursuant to Regulation (EC) No 1829/2003 of the European Parliament and of the Council and repealing Decision 2004/657/EC (notified under document C(2010) 5129) Text with EEA relevance2010/425/EU: Commission Decision of 28 July 2010 amending Decision 2009/767/EC as regards the establishment, maintenance and publication of trusted lists of certification service providers supervised/accredited by Member States (notified under document C(2010) 5063) Text with EEA relevance2010/429/: Commission Decision of 28 July 2010 authorising the placing on the market of products containing, consisting of, or produced from genetically modified maize MON 88017 x MON 810 (MON-88Ø17-3 x MON-ØØ81Ø-6) pursuant to Regulation (EC) No 1829/2003 of the European Parliament and of the Council (notified under document C(2010) 5139) Text with EEA relevance2010/491/EC: Council Decision of 27 July 2009 on the signing, on behalf of the Community, of the Arrangement between the European Community, of the one part, and the Swiss Confederation and the Principality of Liechtenstein, of the other part, on the modalities of the participation by those States in the European Agency for the Management of Operational Cooperation at the External Borders of the Member States of the European UnionCommission Decision of 27 July 2010 on the appointment of the members of the European Union Committee of Experts on Rare Diseases set up by Decision 2009/872/EC
Source: EUR-Lex (Publications Office of the EU), © European Union, reuse permitted under Commission Decision 2011/833/EU.
What to look at next
Browse all EU Legal ActsEvery instrument by type and year, full text free to read section by sectionEuropean Union legislationEU Legal Acts by type and yearGrouped by instrument type and year of enactment, so you can find others of the same kindBrowse by type and yearEuropean Union: what this database coversWhich datasets are here, which official source they come from, and how current they areEuropean Union overview