Commission Implementing Regulation (EU) 2026/1692 of 13 July 2026 granting a Union authorisation for the biocidal product family ECA Disinfect Product family 5 in accordance with Regulation (EU) No 528/2012 of the European Parliament and of the Council

Article 1

A Union authorisation with authorisation number EU-0036247-0000 is hereby granted to ECA Consortium A/S for the making available on the market and use of the biocidal product family ‘ECA Disinfect Product family 5’ in accordance with the summary of product characteristics set out in the Annex. The Union authorisation is valid from 4 August 2026 until 31 July 2036.

Article 2

This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union .

SUMMARY OF PRODUCT CHARACTERISTICS FOR A BIOCIDAL PRODUCT FAMILY

ANNEXSupplementary provisions

ANNEX SUMMARY OF PRODUCT CHARACTERISTICS FOR A BIOCIDAL PRODUCT FAMILY ECA Disinfect Product family 5 Product type(s) PT02: Disinfectants and algaecides not intended for direct application to humans or animals PT04: Food and feed area PT05: Drinking water Authorisation number EU-0036247-0000 R4BP asset number EU-0036247-0000 PART I. FIRST INFORMATION LEVEL 1.   ADMINISTRATIVE INFORMATION 1.1.    Family name Name ECA Disinfect Product family 5 1.2.    Product type(s) Product type(s) PT02: Disinfectants and algaecides not intended for direct application to humans or animals PT04: Food and feed area PT05: Drinking water 1.3.    Authorisation holder Name and address of the authorisation holder Name ECA Consortium A/S Address Blegen 9, 4.th 6400 Sønderborg DK Authorisation number   EU-0036247-0000 R4BP asset number   EU-0036247-0000 Date of the authorisation   4 August 2026 Expiry date of the authorisation   31 July 2036 1.4.    Manufacturer(s) of the product Name of manufacturer ACS B.V. Address of manufacturer Oostergracht 17-11 3763 LX Soes Netherlands (the) Location of manufacturing sites ACS B.V., site 1 Oostergracht 17-11 3763 LX Soes Netherlands (the) Name of manufacturer Actalys France Address of manufacturer Z.A du Haut des Tappes, BP 70 065 54310 Homecourt France Location of manufacturing sites Actalys site 1 Z.A du Haut des Tappes, BP 70 065 54310 Homecourt France Name of manufacturer BEULCO GmbH & Co. KG Address of manufacturer Kölner Str. 92 D-57439 Attendorn Germany Location of manufacturing sites BEULCO GmbH & Co. KG site 1 Kölner Str. 92 D-57439 Attendorn Germany Name of manufacturer Briotech European Operations Oy Address of manufacturer Teknobulevardi 3-5 01530 Vantaa Finland Location of manufacturing sites Briotech European Operations Oy Technopolis site 1 Teknobulevardi 3-5 01530 Vantaa Finland Name of manufacturer BBDistrilux Address of manufacturer 6 rue Henri M.Schnadt 2530 Luxembourg Luxembourg Location of manufacturing sites BBDistrilux site 1 12 rue de l’industrie 3895 Foetz Luxembourg Name of manufacturer Danish Clean Water A/S Address of manufacturer Nørrekobbel 11 6400 Sønderborg Denmark Location of manufacturing sites Danish Clean Water A/S site 1 Nørrekobbel 11 6400 Sønderborg Denmark Name of manufacturer Easymetal GmbH Address of manufacturer Resselstrasse 12 2120 Wolkersdorf im Weinviertel Austria Location of manufacturing sites Easymetal GmbH site 1 Resselstrasse 12 2120 Wolkersdorf im Weinviertel Austria Name of manufacturer ecabiotec AG Address of manufacturer Starkenburgstrasse 10 D-64546 Mörfelden Germany Location of manufacturing sites Ecabiotec AG, site 1 Starkenburgstrasse 10 D-64546 Mörfelden Germany Name of manufacturer Ecas Qauttro s.r.l. Address of manufacturer Pietro Miliani 7 40132 Bologna Italy Location of manufacturing sites Ecas Qauttro s.r.l. site 1 Pietro Miliani 7 40132 Bologna Italy Name of manufacturer Elox GmbH Address of manufacturer Auen Süduferstrasse 6 AUT-9220 Velden Austria Location of manufacturing sites Elox GmbH site 1 Auen Süduferstrasse 67 9220 Velden Austria Name of manufacturer Elyte AS Address of manufacturer Breivika Industriveg 48 6018 Ålesund Norway Location of manufacturing sites Elyte AS site 1 Breivika Industriveg 48 6018 Ålesund Norway Name of manufacturer Gotika 1212 s.r.o Address of manufacturer Arbesova 751/9 46001 Liberec Czechia Location of manufacturing sites Gotika 1212 s.r.o Majerská 3 821 07 Bratislava Slovakia Name of manufacturer Hydroliq solutions GmbH Address of manufacturer Staldenhof 17 CH 6014 Luzern Switzerland Location of manufacturing sites Hydroliq AG, site 1 Staldenhof 17 CH-6014 Luzern Switzerland Name of manufacturer HyperDes Water Technology Address of manufacturer Bastenauer Strasse 11 91637 Wornitz Germany Location of manufacturing sites HyperDES-watertechnology GmbH site 1 Bastenauer Strasse 11 91637 Wornitz Germany Name of manufacturer Impressio GmbH Address of manufacturer Schäffergasse 20/26 1040 Vienna Austria Location of manufacturing sites Impressio GmbH site 1 Hallerstrasse 43 6020 Innsbruck Austria Name of manufacturer Innowatech GmbH Address of manufacturer Alte Kaserne 28 D-72186 Empfingen Germany Location of manufacturing sites Innowatech GmbH site 1 Alte Kaserne 28 72186 Empfingen Germany Name of manufacturer KS Natec AG Address of manufacturer Landstrasse 29 CH-5430 Wettingen Switzerland Location of manufacturing sites KS Natec AG, site 1 Landstrasse 29 CH-5430 Wettingen Switzerland Name of manufacturer Madoma Care GmbH Address of manufacturer Albert-Einstein-Str.10 87437 Kempten Germany Location of manufacturing sites Madoma Care GmbH, site 1 Albert-Einstein-Str.. 10 87437 Kempten Germany Name of manufacturer Newtec Umwelttechnik GmbH Address of manufacturer Am Borsigturm 62 13507 Berlin Germany Location of manufacturing sites Newtec Umwelttechnik GmbH site 1 Am Borsigturm 62 13507 Berlin Germany Name of manufacturer Noxefin GmbH & Co Ks Address of manufacturer Wimmentaler strasse 36 74189 Weinsberg-Grantchen Germany Location of manufacturing sites Noxefin GmbH & Co Ks site 1 Wimmentaler strasse 36 74189 Weinsberg-Grantchen Germany Name of manufacturer Nuova Control Systems Srl Address of manufacturer Viale Vittorio Veneto 60 59100 Prato Italy Location of manufacturing sites Nuova Control Systems Srl site 1 Viale Vittorio Veneto 60 59100 Prato Italy Name of manufacturer PureClean.eu ApS Address of manufacturer Runddelsvej 17 8930 Randers NØ Denmark Location of manufacturing sites PureClean.eu ApS site 1 Runddelsvej 17 8930 Randers NØ Denmark Name of manufacturer PureClean.eu ApS Address of manufacturer Ruosilantie 7b 00390 Helsinki Finland Location of manufacturing sites PureClean.eu ApS , site1 Runddelsvej 17 8930 Randers NØ Denmark Name of manufacturer Portsmouth Aqua SRL Address of manufacturer 4 Costache Negri Entrance, Room No.1 Ap. 1 District 5 Bucharest Romania Location of manufacturing sites Portsmouth Aqua SRL, site 1 TEHNO-GRUP S.R.L ROMANIA Str.Gheorghit, a, Geolgau, Nr.64 207450 Pielesti,Jud., Dolij Romania Portsmouth Aqua SRL site 2 “NILO” D. PAPAMICHAIL & CO L.P., Asprogia Diminiou 385 00 Volos Greece Name of manufacturer SAWAMED CRD GmbH Address of manufacturer Industriepark 2 9330 Althofen Austria Location of manufacturing sites SAWAMED CRD GmbH site 1 Industriepark 2 9330 Althofen Austria Name of manufacturer Veriforte GmbH Address of manufacturer Tobel 1505 8877 Murg Switzerland Location of manufacturing sites Veriforte GmbH site 1 Tobel 1505 8877 Murg Switzerland Name of manufacturer Waion AG Address of manufacturer Allweg 6 6372 Ennetmoos Switzerland Location of manufacturing sites Waion AG site 1 Allweg 6 6372 Ennetmoos Switzerland Name of manufacturer Watair GmbH Address of manufacturer Aebischen 41 3202 Frauenkoppelen Switzerland Location of manufacturing sites Watair GmbH site 1 Aebischen 41 3202 Frauenkoppelen Switzerland Name of manufacturer Zimmer Reinigungstechnik GmbH Address of manufacturer Raiffeisenstraße 6 97256 Hettstadt Germany Location of manufacturing sites Zimmer Reinigungstechnik GmbH site 1 Raiffeisenstraße 6 67265 Hettstadt Germany 1.5.    Manufacturer(s) of the active substance(s) Active substance Active chlorine released from hypochlorous acid Name of manufacturer ACS B.V. Address of manufacturer Oostergracht 17-11 3763 LX Soes Netherlands (the) Location of manufacturing sites ACS B.V., site 1 Oostergracht 17-11 3763 LX Soes Netherlands (the) Active substance Active chlorine released from hypochlorous acid Name of manufacturer Actalys France Address of manufacturer Z.A du Haut ds Tappes, BP 70 065 54310 Homecourt France Location of manufacturing sites Actalys site 1 Z.A du Haut des Tappes, BP 70 065 54310 Homecourt France Active substance Active chlorine released from hypochlorous acid Name of manufacturer BEULCO GmbH & Co. KG Address of manufacturer Kölner Str. 92 D-57439 Attendorn Germany Location of manufacturing sites BEULCO GmbH & Co. KG site 1 Kölner Str. 92 D-57439 Attendorn Germany Active substance Active chlorine released from hypochlorous acid Name of manufacturer Briotech European Operations Oy Address of manufacturer Teknobulevardi 3-5 01530 Vantaa Finland Location of manufacturing sites Briotech European Operations Oy Technopolis site 1 Teknobulevardi 3-5 01530 Vantaa Finland Active substance Active chlorine released from hypochlorous acid Name of manufacturer BBDistrilux Address of manufacturer 6 rue Henri M.Schnadt 2530 Luxembourg Luxembourg Location of manufacturing sites BBDistrilux site 1 12 rue de l’industrie 3895 Foetz Luxembourg Active substance Active chlorine released from hypochlorous acid Name of manufacturer Danish Clean Water A/S Address of manufacturer Nørrekobbel 11 6400 Sønderborg Denmark Location of manufacturing sites Danish Clean Water A/S site 1 Nørrekobbel 11 6400 Sønderborg Denmark Active substance Active chlorine released from hypochlorous acid Name of manufacturer Easymetal GmbH Address of manufacturer Resselstrasse 12 2120 Wolkersdorf im Weinviertel Austria Location of manufacturing sites Easymetal GmbH site 1 Resselstrasse 12 2120 Wolkersdorf im Weinviertel Austria Active substance Active chlorine released from hypochlorous acid Name of manufacturer ecabiotec AG Address of manufacturer Starkenburgstrasse 10 D-64546 Mörfelden Germany Location of manufacturing sites Ecabiotec AG site 1 Starkenburgstrasse 10 D-64546 Mörfelden Germany Active substance Active chlorine released from hypochlorous acid Name of manufacturer Ecas Qauttro s.r.l. Address of manufacturer Pietro Miliani 7 40132 Bologna Italy Location of manufacturing sites Ecas Qauttro s.r.l. site 1 Pietro Miliani 7 40132 Bologna Italy Active substance Active chlorine released from hypochlorous acid Name of manufacturer Elox GmbH Address of manufacturer Auen Süduferstrasse 6 AUT-9220 Velden Austria Location of manufacturing sites Elox GmbH site 1 Auen Süduferstrasse 67 9220 Velden Austria Active substance Active chlorine released from hypochlorous acid Name of manufacturer Elyte AS Address of manufacturer Breivika Industriveg 48 6018 Ålesund Norway Location of manufacturing sites Elyte AS site 1 Breivika Industriveg 48 6018 Ålesund Norway Active substance Active chlorine released from hypochlorous acid Name of manufacturer Gotika 1212 s.r.o Address of manufacturer Arbesova 751/9 46001 Liberec Czechia Location of manufacturing sites Gotika 1212 s.r.o Majerská 3 821 07 Bratislava Slovakia Active substance Active chlorine released from hypochlorous acid Name of manufacturer Hydroliq solutions GmbH Address of manufacturer Staldenhof 17 CH 6014 Luzern Switzerland Location of manufacturing sites Hydroliq AG, site 1 Staldenhof 17 CH-6014 Luzern Switzerland Active substance Active chlorine released from hypochlorous acid Name of manufacturer HyperDes Water Technology Address of manufacturer Bastenauer Strasse 11 91637 Wornitz Germany Location of manufacturing sites HyperDES-watertechnology GmbH site 1 Bastenauer Strasse 11 91637 Wornitz Germany Active substance Active chlorine released from hypochlorous acid Name of manufacturer Impressio GmbH Address of manufacturer Schäffergasse 20/26 1040 Vienna Austria Location of manufacturing sites Impressio GmbH site 1 Hallerstrasse 43 6020 Innsbruck Austria Active substance Active chlorine released from hypochlorous acid Name of manufacturer Innowatech GmbH Address of manufacturer Alte Kaserne 28 D-72186 Empfingen Germany Location of manufacturing sites Innowatech GmbH site 1 Alte Kaserne 28 72186 Empfingen Germany Active substance Active chlorine released from hypochlorous acid Name of manufacturer KS Natec AG Address of manufacturer Landstrasse 29 CH-5430 Wettingen Switzerland Location of manufacturing sites KS Natec AG, site 1 Landstrasse 29 CH-5430 Wettingen Switzerland Active substance Active chlorine released from hypochlorous acid Name of manufacturer Madoma Care GmbH Address of manufacturer Albert-Einstein-Str.10 87437 Kempten Germany Location of manufacturing sites Madoma Care GmbH, site 1 Albert-Einstein-Str.. 10 87437 Kempten Germany Active substance Active chlorine released from hypochlorous acid Name of manufacturer Newtec Umwelttechnik GmbH Address of manufacturer Am Borsigturm 62 13507 Berlin Germany Location of manufacturing sites Newtec Umwelttechnik GmbH site 1 Am Borsigturm 62 13507 Berlin Germany Active substance Active chlorine released from hypochlorous acid Name of manufacturer Noxefin GmbH & Co Ks Address of manufacturer Wimmentaler strasse 36 74189 Weinsberg-Grantchen Germany Location of manufacturing sites Noxefin GmbH & Co Ks site 1 Wimmentaler strasse 36 74189 Weinsberg-Grantchen Germany Active substance Active chlorine released from hypochlorous acid Name of manufacturer Nuova Control Systems Srl Address of manufacturer Viale Vittorio Veneto 60 59100 Prato Italy Location of manufacturing sites Nuova Control Systems Srl site 1 Viale Vittorio Veneto 60 59100 Prato Italy Active substance Active chlorine released from hypochlorous acid Name of manufacturer PureClean.eu ApS Address of manufacturer Runddelsvej 17 8930 Randers NØ Denmark Location of manufacturing sites PureClean.eu ApS site 1 Runddelsvej 17 8930 Randers NØ Denmark Active substance Active chlorine released from hypochlorous acid Name of manufacturer PureClean.eu ApS Address of manufacturer Ruosilantie 7b 00390 Helsinki Finland Location of manufacturing sites PureClean.eu ApS site 2 Runddelsvej 17 8930 Randers NØ Denmark Active substance Active chlorine released from hypochlorous acid Name of manufacturer Portsmouth Aqua SRL Address of manufacturer 4 Costache Negri Entrance, Room No.1 Ap. 1 District 5 Bucharest Romania Location of manufacturing sites Portsmouth Aqua SRL, site 1 TEHNO-GRUP S.R.L ROMANIA Str.Gheorghit, a, Geolgau, Nr.64 207450 Pielesti,Jud., Dolij Romania Portsmouth Aqua SRL site 2 “NILO” D. PAPAMICHAIL & CO L.P., Asprogia Diminiou 385 00 Volos Greece Active substance Active chlorine released from hypochlorous acid Name of manufacturer SAWAMED CRD GmbH Address of manufacturer Industriepark 2 9330 Althofen Austria Location of manufacturing sites SAWAMED CRD GmbH site 1 Industriepark 2 9330 Althofen Austria Active substance Active chlorine released from hypochlorous acid Name of manufacturer Veriforte GmbH Address of manufacturer Tobel 1505 8877 Murg Switzerland Location of manufacturing sites Veriforte GmbH site 1 Tobel 1505 8877 Murg Switzerland Active substance Active chlorine released from hypochlorous acid Name of manufacturer Waion AG Address of manufacturer Allweg 6 6372 Ennetmoos Switzerland Location of manufacturing sites Waion AG site 1 Allweg 6 6372 Ennetmoos Switzerland Active substance Active chlorine released from hypochlorous acid Name of manufacturer Watair GmbH Address of manufacturer Aebischen 41 3202 Frauenkoppelen Switzerland Location of manufacturing sites Watair GmbH site 1 Aebischen 41 3202 Frauenkoppelen Switzerland Active substance Active chlorine released from hypochlorous acid Name of manufacturer Zimmer Reinigungstechnik GmbH Address of manufacturer Raiffeisenstraße 6 97256 Hettstadt Germany Location of manufacturing sites Zimmer Reinigungstechnik GmbH site 1 Raiffeisenstraße 6 67265 Hettstadt Germany 2.   PRODUCT FAMILY COMPOSITION AND FORMULATION 2.1.    Qualitative and quantitative information on the composition of the family Common name IUPAC name Function CAS number EC number Content (%) Hypochlorous acid Hypochlorous acid Releaser 7790-92-3 232-232-5 0,019 - 0,074 % (w/w) Active chlorine released from hypochlorous acid Active chlorine released from hypochlorous acid Active substance     0,025 - 0,1 % (w/w) 2.2.    Type(s) of formulation Formulation type(s) SL Soluble concentrate PART II. SECOND INFORMATION LEVEL META SPC(S) 1.   META SPC 1 ADMINISTRATIVE INFORMATION 1.1.    Meta SPC 1 identifier Identifier Meta SPC: Meta SPC 1 - BPF5 1.2.    Suffix to the authorisation number Number 1-1 1.3.    Product type(s) Product type(s) PT02: Disinfectants and algaecides not intended for direct application to humans or animals PT04: Food and feed area PT05: Drinking water 2.   META SPC 1 COMPOSITION 2.1.    Qualitative and quantitative information on the composition of the meta SPC 1 Common name IUPAC name Function CAS number EC number Content (%) Hypochlorous acid Hypochlorous acid Releaser 7790-92-3 232-232-5 0,019 - 0,074 % (w/w) Active chlorine released from hypochlorous acid Active chlorine released from hypochlorous acid Active substance     0,025 - 0,1 % (w/w) 2.2.    Type(s) of formulation of the meta SPC 1 Formulation type(s) SL Soluble concentrate 3.   HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 1 Hazard statements H290: May be corrosive to metals. Precautionary statements P390: Absorb spillage to prevent material damage. P234: Keep only in original packaging. 4.   AUTHORISED USE(S) OF THE META SPC 4.1.    Use description Table 1 1.1 Disinfection for pipework/inner surfaces (CIP) (PT2) Product type PT02: Disinfectants and algaecides not intended for direct application to humans or animals Where relevant, an exact description of the authorised use - Target organism(s) (including development stage) Common name: Bacteria Development stage: no data Common name: Yeasts Development stage: no data Field(s) of use indoor use Disinfection of pipework and inner surfaces, cleaning in place (CIP) with circulation. Hard surface disinfection (non-porous) in cosmetic and pharmaceutical industries. Application method(s) Method: closed system Detailed description: Professional users: Automated dosing (dosing pump) or manual dosing into a storage-holding tank. Dilute the product in the storage-holding tank. Add the solution to the empty system that is to be disinfected. General public (non-professional users): Manual dosing into a storage-holding tank. Dilute the product in the storage-holding tank. Add the solution to the empty system that is to be disinfected. Dose solution into an empty, clean system. Temperature: 20±1  o C. Application rate(s) and frequency Application Rate: 0,0058 % (w/w) active chlorine ECA Disinfect 250: 331 ml product and 669 ml water ECA Disinfect 500: 166 ml product and 834 ml water ECA Disinfect 550: 151 ml product and 849 ml water ECA Disinfect 750: 110 ml product and 890 ml water ECA Disinfect 800: 104 ml product and 869 ml water ECA Disinfect 1000: 83 ml product and 917 ml water Number and timing of application: Contact time: 60 minutes. Category(ies) of users professional general public (non-professional) Pack sizes and packaging material Bottle of high-density polyethylene (HDPE)/polyethylene terephthalate (PET) and IBC-Tank of HDPE/PTE Sizes: General public (non-professional) users: 250, 500, 750 mL, 1, 2.5, 5, 7.5, 10, 20 litres. Professional users: 250, 500, 750 mL, 1, 2.5, 5, 7.5, 10, 20, 500, 600, 1000 litres. 4.1.1.    Use-specific instructions for use General public (non-professional) users and professional users – manual dosing: Clean the pipework and inner surfaces before disinfection. The storage-holding tank must be cleaned before use. Dilute the product in the storage-holding tank according to the dosing requirements. Make sure the product is evenly distributed in the water, for example by mixing the solution, before the solution is added to the system. Circulate the solution in the system for 60 minutes. Make sure to wet the surfaces completely. Empty the system after disinfection. Rinse treated pipes and machinery twice with drinking water after application. The solution must be used within 24 hours after preparation. Professional users – automated dosing (dosing-pump): Clean the pipework and inner surfaces before disinfection. The storage-holding tank must be cleaned before use. Dose the product in the storage-holding tank according to the dosing requirements. Make sure the product is evenly distributed in the water before the solution is added to the system. Circulate the solution in the system for 60 minutes. Make sure to wet the surfaces completely. Empty the system after disinfection. Rinse treated pipes and machinery twice with drinking water after application. The solution must be used within 24 hours after preparation. 4.1.2.    Use-specific risk mitigation measures Not relevant 4.1.3.    Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment Not relevant 4.1.4.    Where specific to the use, the instructions for safe disposal of the product and its packaging Dispose of content/container in accordance with local regulations. 4.1.5.    Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage Please see general directions for use 4.2.    Use description Table 2 1.2 Disinfection for pipework/inner surfaces (CIP) (PT4) Product type PT04: Food and feed area Where relevant, an exact description of the authorised use - Target organism(s) (including development stage) Common name: Bacteria Development stage: no data Common name: Yeasts Development stage: no data Field(s) of use indoor use Disinfection of pipework and inner surfaces, cleaning in place (CIP) with circulation. Hard surface disinfection (non-porous) in food production and processing industry area (including breweries, (non)-alcoholic beverages, dairy industry) and private food processing area. Application method(s) Method: closed system Detailed description: Professional users: Automated dosing (dosing pump) or manual dosing into a storage-holding tank. Dilute the product in the storage-holding tank. Add the solution to the empty system that is to be disinfected. General public (non-professional users): Manual dosing into a storage-holding tank. Dilute the product in the storage-holding tank. Add the solution to the empty system that is to be disinfected. Dose solution into an empty, clean system. Temperature: 20±1  o C. Application rate(s) and frequency Application Rate: 0,0058 % (w/w) active chlorine ECA Disinfect 250: 331 ml product and 669 ml water ECA Disinfect 500: 166 ml product and 834 ml water ECA Disinfect 550: 151 ml product and 849 ml water ECA Disinfect 750: 110 ml product and 890 ml water ECA Disinfect 800: 104 ml product and 869 ml water ECA Disinfect 1000: 83 ml product and 917 ml water Number and timing of application: Contact time: 60 minutes. Category(ies) of users professional general public (non-professional) Pack sizes and packaging material Bottle with screw cap in HDPE/PET material IBC-Tank of HDPE/PTE General public (non-professional) users: 250, 500, 750 mL, 1, 2.5, 5, 7.5, 10, 20 litres. Professional users: 250, 500, 750 mL, 1, 2.5, 5, 7.5, 10, 20, 500, 600, 1000 litres. 4.2.1.    Use-specific instructions for use General public (non-professional) users and professional users – manual dosing: Clean the pipework and inner surfaces before disinfection. The storage-holding tank must be cleaned before use. Dilute the product in the storage-holding tank according to the dosing requirements. Make sure the product is evenly distributed in the water, for example by mixing the solution, before the solution is added to the system. Circulate the solution in the system for 60 minutes. Make sure to wet the surfaces completely. Empty the system after disinfection. Rinse treated pipes and machinery twice with drinking water after application. The solution must be used within 24 hours after preparation. Professional users – automated dosing (dosing-pump): Clean the pipework and inner surfaces before disinfection. The storage-holding tank must be cleaned before use. Dose the product in the storage-holding tank according to the dosing requirements. Make sure the product is evenly distributed in the water before the solution is added to the system. Circulate the solution in the system for 60 minutes. Make sure to wet the surfaces completely. Empty the system after disinfection. Rinse treated pipes and machinery twice with drinking water after application. The solution must be used within 24 hours after preparation. For food commodities, ensure that the concentration of chlorate present in food does not exceed the MRL values set in Regulation 2020/749. 4.2.2.    Use-specific risk mitigation measures Not relevant 4.2.3.    Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment Not relevant 4.2.4.    Where specific to the use, the instructions for safe disposal of the product and its packaging Dispose of content/container in accordance with local regulations. 4.2.5.    Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage Please see general directions for use 4.3.    Use description Table 3 1.3 Disinfection of drinking water for animals (PT5) Product type PT05: Drinking water Where relevant, an exact description of the authorised use - Target organism(s) (including development stage) Common name: Bacteria Development stage: no data Common name: Viruses Development stage: no data Field(s) of use indoor use Disinfection of drinking water for animals Application method(s) Method: closed system - continuous dosing Detailed description: Professional users: Continuous, automated dosing (dosing pump) into the water system. General public (non-professional) users: Continuous, automated dosing (dosing pump) into the water system. Application rate(s) and frequency Application Rate: 0,00003 % (w/w) active chlorine Dosing per 1 litre of water: ECA Disinfect 250: 1,714 ml product ECA Disinfect 500: 0,857 ml product ECA Disinfect 550: 0,779 ml product ECA Disinfect 750: 0,571 ml product ECA Disinfect 800: 0,536 ml product ECA Disinfect 1000: 0,429 ml product Number and timing of application: Continuous dosing (automated dosing). Category(ies) of users professional general public (non-professional) Pack sizes and packaging material Bottle with screw cap in HDPE/PET material IBC-Tank of HDPE/PTE General public (non-professional) users: 250, 500, 750 mL, 1, 2.5, 5, 7.5, 10, 20 litres Professional users: 250, 500, 750 mL, 1, 2.5, 5, 7.5, 10, 20, 500, 600, 1000 litres 4.3.1.    Use-specific instructions for use General public (non-professional) users – automated dosing (dosing pump) into the water system: Dose the product into the water according to the dosing requirements. Types of Dosing Equipment (General Use Instructions) 1. Timer-Based Dosing Pump 1. Suitable for systems with a known, fixed water volume. 2. Set the pump to run for a calculated duration to achieve the desired dosing level. 3. Always verify calculations and follow the recommended steps for setup and monitoring. 2. Flow Meter-Linked Dosing Pump 1. Designed for systems where water flow varies. 2. The pump doses disinfectant proportionally to the measured water flow. 3. Ensure the equipment is calibrated according to the calculated dosing requirements and follow standard setup and monitoring procedures. 3. Active Substance Monitor-Linked Dosing Pump 1. Maintains a target concentration of the active substance (e.g., active chlorine) in the water. 2. May also be connected to a flow meter for additional control. 3. Set the pump to maintain the required concentration, adjusting as needed based on monitoring results. Always follow the recommended steps for setup, measurement, and adjustment. General Guidance for All Equipment Types — Always read and follow the manufacturer’s instructions before setting up any dosing equipment. — Calculate dosing requirements based on system volume, product concentration, and target substance level. — Regularly monitor and adjust dosing to maintain safe and effective levels. — Document all settings and measurements for traceability and safety. Professional users - automated dosing (dosing pump) into the water system: Dose the product into the water system according to the dosing requirements. Only use for disinfection of water of drinking water quality. Do not exceed the national limits for the concentration of chlorine in drinking water. Ensure that the concentration of chlorate present in drinking water does not exceed the parametric values set in Directive 2020/2184. 4.3.2.    Use-specific risk mitigation measures Not relevant 4.3.3.    Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment Not relevant 4.3.4.    Where specific to the use, the instructions for safe disposal of the product and its packaging Dispose of content/container in accordance with local regulations. 4.3.5.    Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage Please see general directions for use 4.4.    Use description Table 4 1.4 Disinfection of drinking water for humans (PT5) Product type PT05: Drinking water Where relevant, an exact description of the authorised use - Target organism(s) (including development stage) Scientific name: other Common name: Bacteria Development stage: no data Scientific name: other Common name: Viruses Development stage: no data Field(s) of use indoor use Disinfection at the drinking water suppliers and their water distribution systems. Disinfection of water in reservoirs, e.g., on ships, in mobile homes, small tanks as in a dentist’s chair. Application method(s) Method: closed system Detailed description: Disinfection at the drinking water suppliers and their water distribution systems: Professional users: Automated dosing (dosing pump) into the water system. Disinfection of water in reservoirs: Professional users: Automated dosing (dosing pump) into the water reservoir. General public (non-professional) users: Automated dosing (dosing pump) into the water reservoir. Adjustment applicable for all authorised fields of use except for small tanks in a dentist’s chair in the territory of Germany in accordance with Article 44(5), second subparagraph, of Regulation (EU) No 528/2012: In accordance with the list of authorised treatment, substances and disinfection processes of Section 20 of the German Ordinance on the Quality of Water Intended for Human Consumption (TrinkwV), the technical rules for dosing set out in the Deutscher Verein des Gas Wasserfaches e.V. -working sheets W 229, W 296, W 623 and the minimum contact time of W 229 apply (See section 6 for full reference to the German Ordinance). In addition, the requirements of DIN EN 901 Tab. 1, Type 1 shall be met regarding the purity. Application rate(s) and frequency Application Rate: Disinfection at the drinking water supplies and their water distribution systems: 0,00003% (w/w) active chlorine. Disinfection of water in reservoirs: 0,00003% (w/w) active chlorine. Dosing per 1 litre of water: ECA Disinfect 250: 1,714 ml product ECA Disinfect 500: 0,857 ml product ECA Disinfect 550: 0,779 ml product ECA Disinfect 750: 0,571 ml product ECA Disinfect 800: 0,536 ml product ECA Disinfect 1000: 0,429 ml product Number and timing of application: Continuous dosing (automated dosing) Adjustment applicable for all authorised fields of use except for small tanks in a dentist’s chair in the territory of Germany in accordance with Article 44(5), second subparagraph, of Regulation (EU) No 528/2012: In accordance with the list of authorised treatment, substances and disinfection processes of Section 20 of the German Ordinance on the Quality of Water Intended for Human Consumption (TrinkwV, see section 6 for the full title of this German Ordinance): Application rate: Maximum addition 1,2mg/l available chlorine in water. Concentration range after completion of treatment: max 0,3 mg/l available chlorine in water, min 0,1 mg/l available chlorine in water (including the amounts before treatment and from other treatments) In exceptional cases an addition of up to 5,1 mg/l available chlorine in water and concentration of up to 0,6 mg/l available chlorine in water after treatment is acceptable if disinfection cannot be ensured by other means or if disinfection is temporarily impaired by the presence of ammonium. Category(ies) of users professional general public (non-professional) Pack sizes and packaging material Bottle with screw cap in HDPE/PET material IBC-Tank of HDPE/PTE Sizes: General public (non-professional) users: 250, 500, 750 mL, 1, 2.5, 5, 7.5, 10, 20 litres. Professional users: 250, 500, 750 mL, 1, 2.5, 5, 7.5, 10, 20, 500, 600, 1000 litres. 4.4.1.    Use-specific instructions for use Disinfection at the drinking water supplies and their water distribution systems. Professional users – automated dosing (dosing-pump): Dose the product into the water system according to the dosing requirements. Disinfection of water in reservoirs: General public (non-professional) users – automated dosing (dosing-pump): Clean the water reservoir before filling it with the water to be disinfected. Dose the product continuously into the water reservoir according to the dosing requirements. Make sure the product is evenly distributed in the solution before using the water. Types of Dosing Equipment (General Use Instructions) 1. Timer-Based Dosing Pump 1. Suitable for systems with a known, fixed water volume. 2. Set the pump to run for a calculated duration to achieve the desired dosing level. 3. Always verify calculations and follow the recommended steps for setup and monitoring. 2. Flow Meter-Linked Dosing Pump 1. Designed for systems where water flow varies. 2. The pump doses disinfectant proportionally to the measured water flow. 3. Ensure the equipment is calibrated according to the calculated dosing requirements and follow standard setup and monitoring procedures. 3. Active Substance Monitor-Linked Dosing Pump 1. Maintains a target concentration of the active substance (e.g., active chlorine) in the water. 2. May also be connected to a flow meter for additional control. 3. Set the pump to maintain the required concentration, adjusting as needed based on monitoring results. Always follow the recommended steps for setup, measurement, and adjustment. General Guidance for All Equipment Types — Always read and follow the manufacturer’s instructions before setting up any dosing equipment. — Calculate dosing requirements based on system volume, product concentration, and target substance level. — Regularly monitor and adjust dosing to maintain safe and effective levels. — Document all settings and measurements for traceability and safety. Professional users - automated dosing (dosing-pump): Clean the water reservoir before filling it with the water to be disinfected. Dose the product continuously into the water reservoir according to the dosing requirements. Make sure the product is evenly distributed in the solution before using the water. For disinfection of water in reservoirs: — Do not use in stationary water. — Only water of drinking water quality should be used to fill the reservoir. — The disinfected water must be used within 24 hours after preparation. Do not exceed the national limits for the concentration of chlorine in drinking water. Ensure that the concentration of chlorate present in drinking water does not exceed the parametric values set in Directive 2020/2184. 4.4.2.    Use-specific risk mitigation measures Not relevant 4.4.3.    Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment Not relevant 4.4.4.    Where specific to the use, the instructions for safe disposal of the product and its packaging Dispose of content/container in accordance with local regulations. 4.4.5.    Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage Please see general directions for use 5.   GENERAL DIRECTIONS FOR USE OF THE META SPC 1 5.1.    Instructions for use Comply with the instructions for use. Please see authorised use section. 5.2.    Risk mitigation measures Precleaning of surfaces required before using disinfectants 5.3.    Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment IF INHALED: If symptoms occur call a POISON CENTRE or a doctor. IF SWALLOWED: If symptoms occur call a POISON CENTRE or a doctor. IF ON SKIN: Wash skin with water. If symptoms occur call a POISON CENTRE or a doctor. IF IN EYES: If symptoms occur rinse with water. Remove contact lenses, if present and easy to do. Call a POISON CENTRE or a doctor. If medical advice is needed, have product container or label at hand. 5.4.    Instructions for safe disposal of the product and its packaging Please see authorised use section. 5.5.    Conditions of storage and shelf-life of the product under normal conditions of storage Keep out of reach of children and non-target animals/pets. Must be stored at a temperature of maximum 20 °C. Protect from frost. Protect from light. Shelf-life: 18 months 6.   OTHER INFORMATION With respect to the “Category(ies) of user(s)” note: Professionals (including industrial users) means trained professionals if this is required by national legislation . Commission Regulation (EU) 2020/749 of 4 June 2020 amending Annex III to Regulation (EC) No 396/2005 of the European Parliament and of the Council as regards maximum residue levels for chlorate in or on certain products ( OJ L 178, 8.6.2020, pp. 7 ELI: http://data.europa.eu/eli/reg/2020/749/oj ). Directive (EU) 2020/2184 of the European Parliament and of the Council of 16 December 2020 on the quality of water intended for human consumption ( OJ L 435, 23.12.2020, pp. 1 ELI: http://data.europa.eu/eli/dir/2020/2184/oj ). References to national provisions for the adjustment applicable in the territory of Germany according to Article 44(5), second subparagraph, of Regulation (EU) No 528/2012: German Ordinance on the Quality of Water Intended for Human Consumption - Verordnung über die Qualität von Wasser für den menschlichen Gebrauch (Trinkwasserverordnung – TrinkwV) in the version of the Second Ordinance for the Revision of the Drinking water Ordinance (Zweite Verordnung zur Novellierung der Trinkwasserverordnung vom 20. Juni 2023 (Bundesgesetzblatt I Nr. 159), https://www.gesetze-im-internet.de/englisch_trinkwv/englisch_trinkwv.pdf . List of authorised treatment substances and disinfection processes of Section 20 of the TrinkwV: Bekanntmachung des Umweltbundesamtes der Liste zulässiger Aufbereitungsstoffe und Desinfektionsverfahren nach § 20 der Trinkwasserverordnung (Stand: Januar 2023) vom 13. Januar 2023, BAnz AT 27.01.2023 B12. Deutscher Verein des Gas- und Wasserfaches e.V. (German Technical and Scientific Association for Gas and Water). Part II, Lfd. Nr.6 of the list of authorised treatment substances and disinfection processes of Section 20 of the TrinkwV. Part I c, Lfd. Nr.4 of the list of authorised treatment substances and disinfection processes of Section 20 of the TrinkwV. DIN EN 901: Chemicals used for treatment of water intended for human consumption - Sodium hypochlorite 7.   THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 1 7.1.    Trade name(s), authorisation number and specific composition of each individual product Trade name(s) ECA Disinfect 250   Authorisation number   EU-0036247-0001 1-1 Common name IUPAC name Function CAS number EC number Content (%) Hypochlorous acid Hypochlorous acid Releaser 7790-92-3 232-232-5 0,019 % (w/w) Active chlorine released from hypochlorous acid Active chlorine released from hypochlorous acid Active substance     0,025 % (w/w) 7.2.    Trade name(s), authorisation number and specific composition of each individual product Trade name(s) ECA Disinfect 500   Authorisation number   EU-0036247-0002 1-1 Common name IUPAC name Function CAS number EC number Content (%) Hypochlorous acid Hypochlorous acid Releaser 7790-92-3 232-232-5 0,04 % (w/w) Active chlorine released from hypochlorous acid Active chlorine released from hypochlorous acid Active substance     0,05 % (w/w) 7.3.    Trade name(s), authorisation number and specific composition of each individual product Trade name(s) ECA Disinfect 550   Authorisation number   EU-0036247-0003 1-1 Common name IUPAC name Function CAS number EC number Content (%) Hypochlorous acid Hypochlorous acid Releaser 7790-92-3 232-232-5 0,04 % (w/w) Active chlorine released from hypochlorous acid Active chlorine released from hypochlorous acid Active substance     0,055 % (w/w) 7.4.    Trade name(s), authorisation number and specific composition of each individual product Trade name(s) ECA Disinfect 750   Authorisation number   EU-0036247-0004 1-1 Common name IUPAC name Function CAS number EC number Content (%) Hypochlorous acid Hypochlorous acid Releaser 7790-92-3 232-232-5 0,056 % (w/w) Active chlorine released from hypochlorous acid Active chlorine released from hypochlorous acid Active substance     0,075 % (w/w) 7.5.    Trade name(s), authorisation number and specific composition of each individual product Trade name(s) ECA Disinfect 800   Authorisation number   EU-0036247-0005 1-1 Common name IUPAC name Function CAS number EC number Content (%) Hypochlorous acid Hypochlorous acid Releaser 7790-92-3 232-232-5 0,06 % (w/w) Active chlorine released from hypochlorous acid Active chlorine released from hypochlorous acid Active substance     0,08 % (w/w) 7.6.    Trade name(s), authorisation number and specific composition of each individual product Trade name(s) ECA Disinfect 1000   Authorisation number   EU-0036247-0006 1-1 Common name IUPAC name Function CAS number EC number Content (%) Hypochlorous acid Hypochlorous acid Releaser 7790-92-3 232-232-5 0,074 % (w/w) Active chlorine released from hypochlorous acid Active chlorine released from hypochlorous acid Active substance     0,1 % (w/w)