Article 1
The goods described in column (1) of the table set out in the Annex shall be classified within the Combined Nomenclature under the CN code indicated in column (2) of that table.
Commission Implementing Regulation (EU) 2026/1874 of 23 July 2026 concerning the classification of certain goods in the Combined Nomenclature
Commission Implementing Regulation (EU) 2026/1874 of 23 July 2026 concerning the classification of certain goods in the Combined Nomenclature
Data as of 2026-08-20 · Compiled from an official source version. Later amendments or repeals may not be reflected; the official text prevails. · Read the official text ↗
Article 2
Binding tariff information which does not conform to this Regulation may continue to be invoked in accordance with Article 34(9) of Regulation (EU) No 952/2013 for a period of three months from the date of entry into force of this Regulation.
Article 3
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union .
Supplementary provisions
ANNEXSupplementary provisions
ANNEX Description of the goods Classification (CN-code) Reasons (1) (2) (3) Galvanised threaded rods of steel other than stainless steel, with a metric thread along their entire length, without a head or recess, with a tensile strength of less than 800 MPa, in different lengths (between 1 000 and 3 000 mm) and diameters (between 4 and 36 mm). They are presented without nuts, washers or similar elements. The articles are used for joining, suspending or fixing a wide range of equipment and components. See images. ( *1 ) 7318 15 42 Classification is determined by general rules 1 and 6 for the interpretation of the Combined Nomenclature, Note 1 (d) to Chapter 72 and by the wording of CN codes 7318 , 7318 15 and 7318 15 42 . Since the article is threaded and used to assemble or fasten goods so that they can be readily disassembled without damage (see also the Harmonised System Explanatory Notes (HSEN) to heading 7318 (A), first paragraph), it has the objective characteristics of an article of subheading 7318 15 (screw studding; see also the HSEN to heading 7318 (A), third paragraph). Consequently, classification under CN code 7318 19 00 as other threaded articles is excluded. The articles are therefore to be classified under CN code7318 15 42 as other screws and bolts without heads, of steel other than stainless steel, with a tensile strength of less than 800 MPa. ( *1 ) The images are purely for information.
Source: EUR-Lex (Publications Office of the EU), © European Union, reuse permitted under Commission Decision 2011/833/EU.
What to look at next
Browse all EU Legal ActsEvery instrument by type and year, full text free to read section by sectionEuropean Union legislationEU Legal Acts by type and yearGrouped by instrument type and year of enactment, so you can find others of the same kindBrowse by type and yearEuropean Union: what this database coversWhich datasets are here, which official source they come from, and how current they areEuropean Union overview