Technical documentation
ANNEX VSupplementary provisions
ANNEX V Technical documentation The technical documentation referred to in Article 3(1)(c) shall include at least the following: (a) the name and address of the supplier; (b) supplier's model identifier i.e. the code, usually alphanumeric, used to distinguish a specific residential ventilation unit model from other models with the same trade mark or supplier's name; (c) where appropriate, the references of the harmonised standards applied; (d) where appropriate, the other calculation methods, measurement standards and specifications used; (e) identification and signature of the person empowered to bind the supplier; (f) where appropriate, the technical parameters for measurements, established in accordance with Annex VIII; (g) overall dimensions; (h) specification of the type of RVU; (i) the specific energy consumption class of the model as defined in Annex II; (j) the specific energy consumption (SEC) for each applicable climate zone; (k) sound power level (L WA ); (l) the results of calculations carried out in accordance with Annex VIII. Suppliers may include additional information at the end of the above list.