ANNEX VISupplementary provisions
ANNEX VI Numbering system of EU type-approval certificates 1. EU type-approval certificates shall be numbered in accordance with the method set out in this Annex. 2. The EU type-approval number shall consist of a total of four sections for whole-vehicle type-approvals and five sections for type-approval of systems, components, and separate technical units as detailed below. In all cases, the sections shall be separated by an asterisk (‘*’). 2.1. Section 1: The lower-case letter ‘e’ followed by the distinguishing number of the Member State issuing the EU type-approval, applicable for all type-approval numbers. 1 Germany 19 Romania 2 France 20 Poland 3 Italy 21 Portugal 4 The Netherlands 23 Greece 5 Sweden 24 Ireland 6 Belgium 25 Croatia 7 Hungary 26 Slovenia 8 Czech Republic 27 Slovakia 9 Spain 29 Estonia 11 United Kingdom 32 Latvia 12 Austria 34 Bulgaria 13 Luxembourg 36 Lithuania 17 Finland 49 Cyprus 18 Denmark 50 Malta 2.2. Section 2: The number of the applicable Regulation of the European Parliament and of the Council or Commission Delegated Regulation. 2.2.1. In case of EU whole-vehicle type-approval ‘167/2013’ shall be indicated; 2.2.2. In the case of national small series whole-vehicle type-approvals in accordance with Article 37 of Regulation (EU) No 167/2013, the letters NKS in block capitals shall precede the ‘167/2013’; 2.2.3. In the case of a system, component or separate technical unit type-approval, the number of the corresponding Commission Delegated Regulation supplementing Regulation (EU) No 167/2013: ‘2015/208’, ‘2015/68’, ‘1322/2014’ or ‘2015/96’ shall be indicated. 2.3. Section 3: the latest amending Commission Delegated Regulation (e.g. ‘RRR/2016’) followed by the identification code of the system, component or separate technical unit, the stage of implementation and/or the class of the device applicable to the type-approval according to Table 6-1. 2.3.1. — In the case of EU whole-vehicle type-approval, section 3 shall be omitted; 2.3.2. In the case of EU type-approval of a system, component or separate technical unit, the number of the last amending Commission Delegated Regulation followed with an alphanumerical character as set out in Table 6-1 to clearly identify the type of system, component or separate technical unit shall be indicated. 2.4. Section 4: Sequential number for type-approval certificates. — A sequential number with leading zeros (as applicable), to denote the type-approval number. The sequential number shall have five digits starting from ‘00001’. 2.5. Section 5: Sequential number to denote the extension number of the type-approval: — a two-digit sequential number, with leading zero as applicable, starting from ‘00’ for each type-approval number issued. 3. On the vehicle's statutory plate(s) only, section 5 shall be omitted. 4. Lay-out of the type-approval numbers (with fictive sequential numbers and fictive amending Commission Delegated Regulation number (‘RRR/2016’) for explanation purposes) Example of a component unit type-approval of a tyre, which has not yet been extended, issued by France: — e2*2015/208*2015/208M*00003*00 — e2 = France (section 1) — 2015/208 = Commission Delegated Regulation (EU) 2015/208 (section 2) — 2015/208M = repeat the Commission Delegated Regulation (EU) 2015/208 to denote that it has not been amended and the letter ‘M’ to indicate that is a tyre (section 3) — 00003 = type-approval sequential number (section 4) — 00 = extension number (section 5) Example of a vehicle system type-approval of an installation of an engine/engine family, amended by another Commission Delegated Regulation RRR/2016 which has been extended twice, issued by Bulgaria: — e34*2015/96*RRR/2016A*00403*02 — e34 = Bulgaria (section 1) — 2015/96 = Commission Delegated Regulation (EU) 2015/96 (section 2) — RRR/2016A = amending Commission Delegated Regulationn number (RRR/2016) and the letter ‘A’ to indicate that is an installation of an engine/engine family (section 3) — 00403 = type-approval sequential number (section 4) — 02 = extension number (section 5) Example of a national small series whole vehicle type-approval, which has been extended once, issued by Austria and granted in accordance with Article 42 of Regulation (EU) No 167/2013: — e12*NKS167/2013*00001*01 — e12 = Austria (section 1) — NKS167/2013 = Regulation (EU) No 167/2013 precede by the national small-series denominator (section 2) — 00001 = type-approval sequential number (section 4) — 01 = extension number (section 5) Example of a whole vehicle type-approval number, which has been extended five times, issued by the Netherlands: — e4*167/2013*10690*05 — e4 = the Netherlands (section 1) 167/2013 Regulation (EU) No 167/2013 (section 2) — 167/2013 = Regulation (EU) No 167/2013 (section 2) — 10690 = type-approval sequential number (section 4) — 05 = extension number (section 5) Table 6-1 Codification for the numbering system of EU type-approval certificates of systems, components and separate technical units LIST I — Environmental and propulsion unit performance requirements System or component/separate technical unit (STU) Commission Delegated Regulation (EU) alphanumerical character System: installation of an engine/engine family 2015/96 A System: external sound level 2015/96 B Component/STU: engine/engine family 2015/96 C LIST II — Vehicle functional safety requirements System or component/separate technical unit (STU) Commission Delegated Regulation (EU) alphanumerical character System: driver information 2015/208 D System: installation of lighting and light-signalling devices 2015/208 E System: electro-magnetic compatibility 2015/208 F System: installation of audible warning device(s) 2015/208 G System: installation of rear-view mirrors 2015/208 H System: installation of crawler undercarriage 2015/208 I STU: electro-magnetic compatibility of electrical/electronic sub-assemblies 2015/208 J Component/STU: ballast masses 2015/208 K Component/STU: lateral and/or rear protective structure 2015/208 L Component: tyre 2015/208 M Component/STU: mechanical coupling (dynamic test method) 2015/208 ND Component/STU: mechanical coupling (static test method) 2015/208 NS LIST III — Vehicle braking requirements System or component/separate technical unit (STU) Commission Delegated Regulation (EU) alphanumerical character System: braking 2015/68 P LIST IV — Vehicle construction and general type-approval requirements System or component/separate technical unit (STU) Commission Delegated Regulation (EU) No alphanumerical character System: driver's exposure to noise level 1322/2014 R System: seat belt anchorages 1322/2014 S System: protection against hazardous substances 1322/2014 T STU: roll-over protective structure (ROPS) (dynamic testing) 1322/2014 U1 STU: roll-over protective structure (ROPS) (track-laying tractors) 1322/2014 U2 STU: roll-over protective structure (ROPS) (static testing) 1322/2014 U3 STU: roll-over protective structure (ROPS) (front mounted narrow-track tractors, static testing) 1322/2014 U4S STU: roll-over protective structure (ROPS) (front mounted narrow-track tractors, dynamic testing) 1322/2014 U4D STU: roll-over protective structure (ROPS) (rear mounted narrow-track tractors, static testing) 1322/2014 U5S STU: roll-over protective structure (ROPS) (rear mounted narrow-track tractors, dynamic testing) 1322/2014 U5D STU: falling objects protective structure (FOPS) 1322/2014 V Component/STU: driver's seat (Category A — Class I) 1322/2014 W1 Component/STU: driver's seat (Category A — Class II) 1322/2014 W2 Component/STU: driver's seat (Category A — Class III) 1322/2014 W3 Component/STU: driver's seat (Category B) 1322/2014 W4 Component/STU: safety belts 1322/2014 X STU: protection against penetrating objects 1322/2014 Y