My bookmarksSign up free

Commission Delegated Regulation (EU) 2018/1229 Article 6

Commission Delegated Regulation (EU) 2018/1229 Article 6

Tolerance levels

Article 6

For the purpose of matching, CSDs shall set tolerance levels for settlement amounts. The tolerance level shall represent the maximum difference between the settlement amounts in two corresponding settlement instructions that would still allow matching. For settlement instructions in EUR, the tolerance level per settlement instruction shall be EUR 2 for settlement amounts of up to EUR 100 000 and EUR 25 for settlement amounts of more than EUR 100 000. For settlement instructions in other currencies, the tolerance level per settlement instruction shall be of equivalent amounts based on the official exchange rate of the ECB, where available.

Read the full instrument → · Read this in context: CHAPTER II — Measures to prevent settlement fails →

Other provisions in CHAPTER II — Measures to prevent settlement fails

Compiled from an official source version. Later amendments or repeals may not be reflected; the official text prevails. · Read the official text ↗ · Data as of 2026-07-04

CitationArticle 6 of Commission Delegated Regulation (EU) 2018/1229 (LawPlayer, data as of 2026-07-04)

© European Union, https://eur-lex.europa.eu, 1998-2026. Reuse authorised under Commission Decision 2011/833/EU, provided the source is acknowledged.

What to look at next

Commission Delegated Regulation (EU) 2018/1229, full textChapter navigation and full text, so you can read this section in contextEuropean Union legislationEU Legal Acts by type and yearGrouped by instrument type and year of enactment, so you can find others of the same kindBrowse by type and yearCHAPTER II — Measures to prevent settlement fails — read this in contextThe surrounding text of the act in order, so you can see what comes before and afterChapters and sections