Article 2
1. The following products shall be excluded from the product described in Article 1(1): — Aluminium beverage can body stock, end stock and tab stock. — Aluminium products, alloyed, of a thickness of not less than 0,2 mm and not more than 6 mm, for use as body panels in the car industry. — Aluminium products, alloyed, of a thickness of not less than 0,8 mm, for use in the manufacture of aircraft parts. 2. The product described in Article 1(1) shall be exempted from provisional anti-dumping duty if it is imported for use in the production of coated coils and aluminium composite panels and if it complies with the following technical characteristics — Tension levelled aluminium coils — Hot-rolled coils — Widths: from 800 mm up to 2 050 mm — Thicknesses: 0,20 mm up to 1,5 mm — Tolerance on thickness: — +/- 0,01 mm from thickness 0,20 until 0,50 mm — +/- ½ norm for thicknesses from 0,51 mm until 1,50 mm — Tolerance on width: +1,50/-0,00 mm — Alloys: 5005, 3005, 3105 — Temper: h14, h16, h24, h26 — Max wave height: max. 3 in 1 000 mm 3. The exclusions under paragraph 1 indent 2 and 3 and the exemption under paragraph 2 shall be subject to the conditions laid down in the customs provisions of the Union on the end use procedure, in particular Article 254 of Regulation (EU) No 952/2013 of the European Parliament and of the Council ( 140 ) (the Union Customs Code).