Remedial measures for cod in the Kattegat
Article 17
1. Union vessels fishing in the Kattegat with bottom trawls ( 31 ) with minimum mesh size of 70 mm shall use one of the following selective gears: (a) sorting grid with maximum 35 mm bar spacing, with an unblocked fish outlet; (b) sorting grid with maximum 50 mm bar spacing separating flatfish and roundfish, with an unblocked fish outlet for roundfish; (c) Seltra panel with 300 mm square-mesh size; (d) regulated highly selective gear, the technical attributes of which result, according to a scientific study assessed by the STECF, in catches of less than 1,5 % of cod, provided it is the only gear that the vessel carries on board. 2. Union vessels participating in a project run by a Member State and having functioning equipment for fully documented fisheries may use a gear in accordance with Part B of Annex V to Regulation (EU) 2019/1241. The Member State in question shall communicate a list of such vessels to the Commission. 3. This Article shall not apply to fishing operations conducted for the exclusive purpose of scientific investigations, provided that those investigations are carried out in compliance with Article 25 of Regulation (EU) 2019/1241.