My bookmarksSign up free

2010/82/: Commission Decision of 9 February 2010 establishing the classes of reaction-to-fire performance for certain construction products as regards decorative wallcoverings in roll and panel form (notified under document C(2010) 397) (Text with EEA relevance)

2010/82/: Commission Decision of 9 February 2010 establishing the classes of reaction-to-fire performance for certain construction products as regards decorative wallcoverings in roll and panel form (notified under document C(2010) 397) (Text with EEA relevance)

Decision · 5 articles

Data as of 2026-07-04 · Compiled from an official source version. Later amendments or repeals may not be reflected; the official text prevails. · Read the official text ↗

Article 1

The construction products and/or materials which satisfy all the requirements of the performance characteristic ‘reaction-to-fire’ without need for further testing are set out in the Annex.

Article 2

The specific classes to be applied to different construction products and/or materials, within the reaction-to-fire classification adopted in Decision 2000/147/EC, are set out in the Annex to this Decision.

Article 3

Products shall be considered in relation to their end-use application, where relevant.

Article 4

This Decision is addressed to the Member States.

Supplementary provisions

ANNEXSupplementary provisions

ANNEX The table set out in this Annex lists construction products and/or materials which satisfy all of the requirements for the performance characteristic ‘reaction-to-fire’ without need for testing. Table Classes of reaction to fire performance for decorative wallcoverings in roll and panel form Product  ( 1 ) Maximum mass per unit area (g/m 2 ) Maximum thickness (mm) Class  ( 2 ) Wallcoverings on cellulose fibre base 190 0,9 D-s3,d2 Wallcoverings on cellulose fibre base and polymer coated or printed 470 0,7 Wallcoverings on a mixture of cellulose and polyester fibre base 160 0,3 Wallcoverings on a mixture of cellulose and polyester fibre base and polymer coated or printed 410 0,5 Wallcoverings on a polymer coated fabric base 510 0,7 Wallcoverings of woven textile with a backing consisting of cellulose fibre or cellulose and polyester fibre 450 0,8 Wallcoverings of foamed PVC with a backing consisting of cellulose fibre or cellulose and polyester fibre 310 1,8 ( 1 )   Products in accordance with EN 15102 mounted on a substrate of at least class A2-s1,d0 with a minimum thickness 12 mm and with minimum density 800 kg/m 3 using starch, or starch/PVA, or cellulose/PVA adhesive applied at a maximum 200 g/m 2 . ( 2 )   Class as provided for in Table 1 of the Annex to Commission Decision 2000/147/EC.

Source: EUR-Lex (Publications Office of the EU), © European Union, reuse permitted under Commission Decision 2011/833/EU.

What to look at next