My bookmarksSign up free
Source

Commission Delegated Directive 2014/6/EU of 18 October 2013 amending, for the purposes of adapting to technical progress, the Annex IV to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for lead in the surface coatings of pin connector systems requiring nonmagnetic connectors which are used durably at a temperature below – 20 °C under normal operating and storage conditions Text with EEA relevance

Commission Delegated Directive 2014/6/EU of 18 October 2013 amending, for the purposes of adapting to technical progress, the Annex IV to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for lead in the surface coatings of pin connector systems requiring nonmagnetic connectors which are used durably at a temperature below – 20 °C under normal operating and storage conditions Text with EEA relevance

Directive 2014/6/EU · Directive · 5 articles

Data as of 2026-07-04 · Compiled from an official source version. Later amendments or repeals may not be reflected; the official text prevails. · Read the official text ↗

Article 1

Open ↗

Annex IV to Directive 2011/65/EU is amended as set out in the Annex to this Directive.

Article 2

Open ↗

1.   Member States shall bring into force the laws, regulations and administrative provisions necessary to comply with this Directive by the last day of the sixth month after entry into force at the latest. They shall forthwith communicate to the Commission the text of those provisions. When Member States adopt those provisions, they shall contain a reference to this Directive or be accompanied by such a reference on the occasion of their official publication. Member States shall determine how such reference is to be made. 2.   Member States shall communicate to the Commission the text of the main provisions of national law which they adopt in the field covered by this Directive.

Article 3

Open ↗

This Directive shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union .

Supplementary provisions

ANNEXSupplementary provisions

Open ↗

ANNEX In Annex IV to Directive 2011/65/EU the following point 25 is added: ‘25. Lead in the surface coatings of pin connector systems requiring nonmagnetic connectors which are used durably at a temperature below – 20 °C under normal operating and storage conditions. Expires on 30 June 2021.’

Implementing measures in the Member States

Transposition links come from the Member States’ notifications published on EUR-Lex. Only high-confidence matches held on LawPlayer are listed; see EUR-Lex for the complete list.

Other acts of the same type
Council Directive 94/33/EC of 22 June 1994 on the protection of young people at workDirective 94/22/EC of the European Parliament and of the Council of 30 May 1994 on the conditions for granting and using authorizations for the prospection, exploration and production of hydrocarbonsDirective 94/11/EC of the European Parliament and of the Council of 23 March 1994 on the approximation of the laws, regulations and administrative provisions of the Member States relating to labelling of the materials used in the main components of footwear for sale to the consumerCommission Directive 94/1/EC of 6 January 1994 adapting some technicalities of Council Directive 75/324/EEC on the approximation of the laws of the relating Member States to aerosol dispensersCouncil Directive 93/109/EC of 6 December 1993 laying down detailed arrangements for the exercise of the right to vote and stand as a candidate in elections to the European Parliament for citizens of the Union residing in a Member State of which they are not nationalsCouncil Directive 93/103/EC of 23 November 1993 concerning the minimum safety and health requirements for work on board fishing vessels (thirteenth individual Directive within the meaning of Article 16 (1) of Directive 89/391/EEC)Commission Directive 93/91/EEC of 29 October 1993 adapting to technical progress Council Directive 78/316/EEC relating to the interior fittings of motor vehicles (identification of controls, tell-tales and indicators)Council Directive 93/83/EEC of 27 September 1993 on the coordination of certain rules concerning copyright and rights related to copyright applicable to satellite broadcasting and cable retransmissionFifth Commission Directive 93/73/EEC of 9 September 1993 on the methods of analysis necessary for checking composition of cosmetic productsCouncil Directive 93/68/EEC of 22 July 1993 amending Directives 87/404/EEC (simple pressure vessels), 88/378/EEC (safety of toys), 89/106/EEC (construction products), 89/336/EEC (electromagnetic compatibility), 89/392/EEC (machinery), 89/686/EEC (personal protective equipment), 90/384/EEC (non-automatic weighing instruments), 90/385/EEC (active implantable medicinal devices), 90/396/EEC (appliances burning gaseous fuels), 91/263/EEC (telecommunications terminal equipment), 92/42/EEC (new hot-water boilers fired with liquid or gaseous fuels) and 73/23/EEC (electrical equipment designed for use within certain voltage limits)Council Directive 93/66/EEC of 19 July 1993 amending Directive 81/645/EEC concerning the Community list of less-favoured farming areas within the meaning of Directive 75/268/EEC (Greece)Commission Directive 93/62/EEC of 5 July 1993 setting out the implementing measures concerning the supervision and monitoring of suppliers and establishments pursuant to Council Directive 92/33/EEC on the marketing of vegetable propagating and planting material, other than seed

Source: EUR-Lex (Publications Office of the EU), © European Union, reuse permitted under Commission Decision 2011/833/EU.

Contents

What to look at next