Commission Implementing Regulation (EU) No 1090/2014 of 16 October 2014 approving permethrin as an existing active substance for use in biocidal products for product-types 8 and 18 Text with EEA relevance

• CELEX: Implementing Regulation (EU) No 1090/2014
• Articles: 3

Article 1

Permethrin shall be approved as an active substance for use in biocidal products for product-types 8 and 18, subject to the specifications and conditions set out in the Annex.

Article 2

This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union .

Schedules & Appendices

ANNEX

ANNEX

Common Name

IUPAC Name

Identification Numbers

Minimum degree of purity of the active substance  ( 1 )

Date of approval

Expiry date of approval

Product type

Specific conditions  ( 2 )

Permethrin

IUPAC Name:

3-phenoxybenzyl (1RS,3RS;1RS,3SR)-3-(2,2-dichlorovinyl)-2,2-dimethylcyclopropanecarboxylate

EC No: 258-067-9

CAS No: 52645-53-1

The cis:trans ratio is 25:75.

930 g/kg

1 May 2016

30 April 2026

8

The product assessment shall pay particular attention to the exposures, the risks and the efficacy linked to any uses covered by an application for authorisation, but not addressed in the Union level risk assessment of the active substance.

For biocidal products, authorisations are subject to the following conditions:

(1)

For industrial or professional users, safe operational procedures and appropriate organizational measures shall be established. Where exposure cannot be reduced to an acceptable level by other means, products shall be used with appropriate personal protective equipment.

(2)

Appropriate risk mitigation measures shall be taken to protect the soil and aquatic compartments. In particular: labels and, where provided, safety data sheets of products authorised shall indicate that industrial application shall be conducted within a contained area or on impermeable hard standing with bunding, that freshly treated timber shall be stored after treatment under shelter or on impermeable hardstanding, or both, to prevent direct losses to soil or water, and that any losses from the application of the product shall be collected for reuse or disposal.

(3)

Products shall not be authorised for wood that will be exposed to frequent weathering unless data is submitted to demonstrate that the product will meet the requirements of Article 19 and Annex VI of Regulation (EU) No 528/2012, if necessary by the application of appropriate risk mitigation measures.

(4)

Products shall not be authorized for treatment of outdoor constructions near or above water or for the treatment of wood that will be used for outdoor constructions near or above water, unless data are submitted to demonstrate that the product will not present unacceptable risks, if necessary by the application of appropriate mitigation measures.

For treated articles, the following condition applies: Where a treated article has been treated with or intentionally incorporates permethrin, and where necessary due to the possibility of skin contact as well as the release of permethrin under normal conditions of use, the person responsible for placing the article on the market shall ensure that the label provides information on the risk of skin sensitisation, as well as the information referred to in the second subparagraph of Article 58(3) of Regulation (EU) No 528/2012.

18

The product assessment shall pay particular attention to the exposures, the risks and the efficacy linked to any uses covered by an application for authorisation, but not addressed in the Union level risk assessment of the active substance.

For biocidal products, authorisations are subject to the following conditions:

(1)

For industrial or professional users, safe operational procedures and appropriate organisational measures shall be established. Where exposure cannot be reduced to an acceptable level by other means, products shall be used with appropriate personal protective equipment.

(2)

Appropriate risk mitigation measures shall be taken to protect the soil and aquatic compartments. Labels and, where provided, safety data sheets of products authorised shall indicate such measures required. In particular, products authorised for the application to textile fibres or other materials to control insect damage shall indicate that freshly treated fibres and other appropriate materials shall be stored to prevent direct losses to soil or water, and that any losses from the application of the product shall be collected for reuse or disposal.

For treated articles, the following condition applies:

Where a treated article has been treated with or intentionally incorporates permethrin, and where necessary due to the possibility of skin contact as well as the release of permethrin under normal conditions of use, the person responsible for placing the article on the market shall ensure that the label provides information on the risk of skin sensitisation, as well as the information referred to in the second subparagraph of Article 58(3) of Regulation (EU) No 528/2012.

( 1 )   The purity indicated in this column was the minimum degree of purity of the active substance used for the evaluation made in accordance with Article 8 of Regulation (EU) No 528/2012. The active substance in the product placed on the market can be of equal or different purity if it has been proven technically equivalent with the evaluated active substance.

( 2 )   For the implementation of the common principles of Annex VI to Regulation (EU) No 528/2012, the content and conclusions of assessment reports are available on the Commission website: http://ec.europa.eu/environment/chemicals/biocides/index_en.htm.