Source

Commission Regulation (EU) 2017/752 of 28 April 2017 amending and correcting Regulation (EU) No 10/2011 on plastic materials and articles intended to come into contact with food (Text with EEA relevance. )

Regulation (EU) 2017/752 · Regulation · 4 articles

Data as of 2026-07-04 · Compiled from an official source version. Later amendments or repeals may not be reflected; the official text prevails. · Read the official text ↗

Article 1

Open ↗

Annexes I, II, III and IV to Regulation (EU) No 10/2011 are amended in accordance with the Annex to this Regulation.

Article 2

Open ↗

Plastic materials and articles complying with Regulation (EU) No 10/2011 as applicable before the entry into force of this Regulation, may be placed on the market until 19 May 2018 and may remain on the market until exhaustion of stocks.

Article 3

Open ↗

This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union . Point 2 of the Annex shall apply from 19 May 2019.

Supplementary provisions

ANNEXSupplementary provisions

Open ↗

ANNEX Regulation (EU) No 10/2011 is amended as follows: (1) Annex I is amended as follows: (a) in point 1, Table 1 is amended as follows: (i) in column 11 as regards the entries for the substances with FCM substance numbers 142, 168, 202, 387, 462, 467, 481, 502, 662 and 779, the reference to note ‘(1)’ is deleted; (ii) the following entries are inserted in numerical order of the FCM substance numbers: ‘1007 976-56-7 diethyl[[3,5-bis(1,1-dimethylethyl)-4-hydroxyphenyl]methyl]phosphonate no yes no Only to be used up to 0,2 % w/w based on the final polymer weight in the polymerisation process to manufacture poly(ethylene terephthalate) (PET)’. ‘1016 (methacrylic acid, ethyl acrylate, n-butyl acrylate, methyl methacrylate and butadiene) copolymer in nanoform yes no no Only to be used up to: (a) 10 % w/w in non-plasticised PVC; (b) 15 % w/w in non-plasticised PLA. The final material shall be used at room temperature or below’. ‘1030 montmorillonite clay modified by dimethyldialkyl(C16-C18)ammonium chloride yes no no Only to be used up to 12 % (w/w) in polyolefins in contact with dry foods to which simulant E is assigned in table 2 of Annex III at room temperature or below. The sum of the specific migration of 1-chlorohexadecane and 1-chlorooctadecane shall not exceed 0,05 mg/kg food. Can contain platelets in the nanoform that are only in one dimension thinner than 100 nm. Such platelets shall be oriented parallel to the polymer surface and shall be fully embedded in the polymer’. ‘1055 7695-91-2 58-95-7 α-tocopherol acetate yes no no Only to be used as antioxidant in polyolefins. (24)’ ‘1060 ground sunflower seed hulls yes no no Only to be used at room temperature or below in contact with foods for which Table 2 of Annex III assigns food simulant E. The seed hulls shall be obtained from sunflower seeds that are fit for human consumption. The processing temperature of the plastic containing the additive shall not exceed 240 °C’. ‘1062 mixture composed of 97 % tetraethyl orthosilicate (TEOS) with CAS No 78-10-4 and 3 % hexamethyldisilazane (HMDS) with CAS No 999-97-3 no yes no Only to be used for the production of recycled PET and at up to 0,12 % (w/w)’. (b) in point 3, in Table 3, the following entry is added: ‘(24) The substance or its hydrolysis products are authorised food additives and compliance with Article 11(3) shall be verified’; (2) in point 1 of Annex II, the following line is inserted after Manganese: ‘Nickel = 0,02 mg/kg food or food simulant.’; (3) in Annex III, point 4 is replaced by the following: ‘4. Food simulant assignment for testing overall migration For tests to demonstrate compliance with the overall migration limit food simulants shall be chosen as set out in Table 3: Table 3 Food simulant assignment for demonstrating compliance with the overall migration limit Foods covered Food simulants in which testing shall be performed all types of food 1. distilled water or water of equivalent quality or food simulant A; 2. food simulant B; and 3. food simulant D2. all types of food except for acidic foods 1. distilled water or water of equivalent quality or food simulant A; and 2. food simulant D2. all aqueous and alcoholic foods and milk products food simulant D1 all aqueous, acidic and alcoholic foods and milk products 1. food simulant D1; and 2. food simulant B. all aqueous foods and alcoholic foods up to an alcohol content of 20 % food simulant C all aqueous and acidic foods and alcoholic foods up to an alcohol content of 20 % 1. food simulant C; and 2. food simulant B.’ (4) in Annex IV, point 8(iii) is replaced by the following: ‘(iii) the highest food contact surface area to volume ratio for which compliance has been verified in accordance with Article 17 and 18 or equivalent information;’.

Other acts of the same type

Source: EUR-Lex (Publications Office of the EU), © European Union, reuse permitted under Commission Decision 2011/833/EU.

What to look at next

Browse all EU Legal ActsEvery instrument by type and year, full text free to read section by sectionEuropean Union legislation EU Legal Acts by type and yearGrouped by instrument type and year of enactment, so you can find others of the same kindBrowse by type and year European Union: what this database coversWhich datasets are here, which official source they come from, and how current they areEuropean Union overview