LawPlayer
My bookmarks
Source

Commission Implementing Regulation (EU) 2020/1991 of 27 November 2020 granting a Union authorisation for the biocidal product family ‘perform-IPA’ (Text with EEA relevance)

Commission Implementing Regulation (EU) 2020/1991 of 27 November 2020 granting a Union authorisation for the biocidal product family ‘perform-IPA’ (Text with EEA relevance)

Implementing Regulation (EU) 2020/1991 · Regulation · 3 articles

In force

Version history

  1. Superseded version
  2. In force

Data as of 2026-11-02 · Compiled from an official source version. Later amendments or repeals may not be reflected; the official text prevails. · Read the official text ↗

Article 1

Open ↗

A Union authorisation with authorisation number EU-0023656-0000 is granted to Schuelke & Mayr GmbH for the making available on the market and use of the biocidal product family ‘perform-IPA’ in accordance with the summary of the biocidal product characteristics set out in the Annex. The Union authorisation is valid from 27 December 2020 until 30 November 2030.

Article 2

Open ↗

This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union .

Supplementary provisions

Summary of product characteristics for a biocidal product family

ANNEXSupplementary provisions

Open ↗

ANNEX Summary of product characteristics for a biocidal product family perform-IPA Product type 2 - Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants) Product type 4 - Food and feed area (Disinfectants) Authorisation number: EU-0023656-0000 R4BP asset number: EU-0023656-0000 PART I FIRST INFORMATION LEVEL 1.    ADMINISTRATIVE INFORMATION 1.1.    Family name Name perform-IPA 1.2.    Product type(s) Product type(s) PT02 - Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants) PT04 - Food and feed area (Disinfectants) 1.3.    Authorisation holder Name and address of the authorisation holder Name Schuelke & Mayr GmbH Address Robert-Koch-Str. 2, 22851 Norderstedt Germany Authorisation number EU-0023656-0000 R4BP asset number EU-0023656-0000 Date of the authorisation 27 December 2020 Expiry date of the authorisation 30 November 2030 1.4.    Manufacturer(s) of the biocidal products Name of manufacturer Schülke & Mayr GmbH Address of manufacturer Robert-Koch-Str. 2, 22851 Norderstedt Germany Location of manufacturing sites Robert-Koch-Str. 2, 22851 Norderstedt Germany Name of manufacturer BOCHEMIE a.s. Address of manufacturer Lidická 326, 735 95 Bohumín Czech Republic Location of manufacturing sites Lidická 326, 735 95 Bohumín Czech Republic Name of manufacturer Imeco Address of manufacturer Am Sägewerk 10, 63773 Goldbach Germany Location of manufacturing sites Boschstr. 5, 63768 Hösbach Germany Neue Straße 2-4, 09471 Köningswalde Germany Am Gansberg 9, 09481 Elterlein Germany ul.Wlo'kiennicza 10, 59-800 Luban Poland Name of manufacturer Tristel Solutions Limited Address of manufacturer Lynx Business Park, Fordham Road, Snailwell, CB8 7NY Cambridgeshire United Kingdom Location of manufacturing sites Lynx Business Park, Fordham Road, Snailwell, CB8 7NY Cambridgeshire United Kingdom Name of manufacturer Techtex Address of manufacturer Units 7&8 Rhodes Bus. Park Silburn Way, M24 4NE Middleton United Kingdom Location of manufacturing sites Units 7&8 Rhodes Bus. Park Silburn Way, M24 4NE Middleton United Kingdom Name of manufacturer A.F.P. GmbH Address of manufacturer Otto Brenner Straße 16, 21337 Lüneburg Germany Location of manufacturing sites Otto Brenner Straße 16, 21337 Lüneburg Germany Name of manufacturer Innovate GmbH Address of manufacturer Gewerbegebietsstraße 30, 06618 Schönburg Germany Location of manufacturing sites Gewerbegebietsstraße 30, 06618 Schönburg Germany Keizersveld 99, 5803 AP Venray Netherlands Name of manufacturer Lysoform Dr. Hans Rosemann GmbH Address of manufacturer Kaiser-Wilhelm-Straße 133, 12247 Berlin Germany Location of manufacturing sites Kaiser-Wilhelm-Straße 133, 12247 Berlin Germany Name of manufacturer Sterisol AB Address of manufacturer Kronoängsgatan 3, 592 23 Vadstena Sweden Location of manufacturing sites Kronoängsgatan 3, 592 23 Vadstena Sweden Name of manufacturer Rudolf Dankwardt GmbH Address of manufacturer Gutenbergring 50-52, 22848 Norderstedt Germany Location of manufacturing sites Gutenbergring 50-52, 22848 Norderstedt Germany Lagerstr. 15, 19249 Jessenitz - Werk / Lübtheen Germany Name of manufacturer BIOXAL SA Address of manufacturer ZI Sud Secteur A, Route des Varennes, 71100 Chalon sur Saône France Location of manufacturing sites ZI Sud Secteur A, Route des Varennes, 71100 Chalon sur Saône France Name of manufacturer Lichtenheldt GmbH Address of manufacturer Industriestrasse 7-9, 23812 Wahlstedt Germany Location of manufacturing sites Industriestrasse 7-9, 23812 Wahlstedt Germany Justus-Liebig-Weg 1, 23812 Wahlstedt Germany Name of manufacturer NATURELLE CONSUMER PRODUCTS LTD Address of manufacturer Unit 5 Bankmore Way, East industrial Park,, BT79 ONZ Doogary, Omagh, Co. Tyrone United Kingdom Location of manufacturing sites Unit 5 Bankmore Way, East industrial Park,, BT79 ONZ Doogary, Omagh, Co. Tyrone United Kingdom Name of manufacturer Halag Chemie AG Address of manufacturer Weiernstrasse 30, 8355 Aadorf Switzerland Location of manufacturing sites Weiernstrasse 30, 8355 Aadorf Switzerland Name of manufacturer PDI (EMEA) Ltd Address of manufacturer Pywell Rd Willowbrook East Industrial Estate, NN17 5XJ Corby United Kingdom Location of manufacturing sites Pywell Rd Willowbrook East Industrial Estate, NN17 5XJ Corby United Kingdom 1.5.    Manufacturer(s) of the active substance(s) Active substance Propan-2-ol Name of manufacturer Ineos Solvents Germany GmbH (formerly Sasol) Address of manufacturer Römerstraße 733, 47443 Moers Germany Location of manufacturing sites Römerstraße 733, 47443 Moers Germany Shamrockstr. 88, 44643 Herne Germany Active substance Propan-2-ol Name of manufacturer Shell Chemicals Europe B.V. Address of manufacturer Postbus 2334, 3000 CH Rotterdam Netherlands Location of manufacturing sites Shell Nederland Raffinaderij B.V., Vondelingenweg 601, 3196 KK Rotterdam-Pernis Netherlands 2.    PRODUCT FAMILY COMPOSITION AND FORMULATION 2.1.    Qualitative and quantitative information on the composition of the family Common name IUPAC name Function CAS number EC number Content (%) Min Max Propan-2-ol   Active Substance 67-63-0 200-661-7 63,1 63,1 2.2.    Type(s) of formulation Formulation(s) Any other liquid (AL), ready-to-use Any other liquid (AL), ready-to-use, wipes impregnated with disinfectant formulation PART II SECOND INFORMATION LEVEL - META SPC(S) META SPC 1 1.    META SPC 1 ADMINISTRATIVE INFORMATION 1.1.    Meta SPC 1 identifier Identifier meta SPC 1 perform IPA liquid 1.2.    Suffix to the authorisation number Number 1-1 1.3.    Product type(s) Product type(s) PT04 - Food and feed area (Disinfectants) PT02 - Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants) 2.    META SPC 1 COMPOSITION 2.1.    Qualitative and quantitative information on the composition of the meta SPC 1 Common name IUPAC name Function CAS number EC number Content (%) Min Max Propan-2-ol   Active Substance 67-63-0 200-661-7 63,1 63,1 2.2.    Type(s) of formulation of the meta SPC 1 Formulation(s) Any other liquid (AL), ready-to-use 3.    HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 1 Hazard statements Highly flammable liquid and vapour. Causes serious eye irritation. May cause drowsiness or dizziness. Repeated exposure may cause skin dryness or cracking. Precautionary statements Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. - No smoking. Keep container tightly closed. Ground and bond container and receiving equipment. Use explosion-proof electrical/ventilating/lighting equipment. Use non-sparking tools. Take action to prevent static discharges. Avoid breathing vapours. Avoid breathing spray. Use only outdoors or in a well-ventilated area. Wear eye protection. IF IN EYES:Rinse cautiously with water for several minutes.Remove contact lenses, if present and easy to do. Continue rinsing. Call a POISON CENTER or doctor if you feel unwell. If eye irritation persists:Get medical advice. If eye irritation persists:Get medical attention. In case of fire:Use alcohol-resistant foam, carbon dioxide or water mist to extinguish. Store in a well-ventilated place.Keep cool. Store locked up. Dispose of contents to /container to an approved waste disposal plant. 4.    AUTHORISED USE(S) OF THE META SPC 1 4.1.    Use description Table 1 Use # 1 – Disinfection of surfaces - spraying Product type PT02 - Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants) Where relevant, an exact description of the authorised use - Target organism(s) (including development stage) Scientific name: Bacteria Common name: - Development stage: - Scientific name: Yeast Common name: - Development stage: - Scientific name: viruses (limited spectrum virucidal activity) Common name: - Development stage: - Field(s) of use Indoor Disinfection of clean non-porous surfaces such as small work surfaces in medical and non-medical areas Application method(s) Method: Spraying Detailed description: Product will be sprayed directly on the surface Application rate(s) and frequency Application Rate: Ready-to-use. Do not apply more than 25 ml/m 2 . Dilution (%): - Number and timing of application: Disinfection after each production and cleaning process or when required according to standard operating procedure (SOP) Category(ies) of users Industrial Professional Pack sizes and packaging material Bottle: 250-1000 ml packaging material: high-density polyethylene (HDPE), surlyn/polypropylene (PP) closure material is either: PP, polyoxymethylene (POM), low-density polyethylene (LDPE), HDPE, polyethylene (PE), ethylene-vinyl acetate (EVA), stainless steel, polybutylene terephthalate (PBT), (LD)PE, exp. polytetrafluoroethylene (PTFE), linear low density polyethylene (LLDPE), expanded PE (EXPPE), Co Polymer PP canister: 5-30 litre packaging material: HDPE. closure material is either: HDPE/LDPE Revolver BAG: 1 litre packaging material: EVA closure material: PP/Silicone/EVA drum: 200 - 220 litre packaging material: HDPE closure material is either: PP IBC: 900-1000 litre packaging material: HDPE with steel frame closure material is either: PP, HDPE 4.1.1.    Use-specific instructions for use Spray ready-to-use product on the surface and allow to take effect at 20± 2°C for at least 1 minute (bactericidal and yeasticidal activity) or 2 minutes (limited spectrum virucidal activity). 4.1.2.    Use-specific risk mitigation measures The following personal risk mitigation measure can be applied for refilling procedure unless it can be replaced by technical and/or organisational measures: Wear eye protection during handling of the product. 4.1.3.    Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use. 4.1.4.    Where specific to the use, the instructions for safe disposal of the product and its packaging 4.1.5.    Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use. 4.2.    Use description Table 2 Use # 2 – Disinfection of surfaces - wiping Product type PT02 - Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants) Where relevant, an exact description of the authorised use - Target organism(s) (including development stage) Scientific name: Bacteria Common name: - Development stage: - Scientific name: Yeast Common name: - Development stage: - Scientific name: viruses (limited spectrum virucidal activity) Common name: - Development stage: - Field(s) of use Indoor Disinfection of clean non-porous surfaces such as small work surfaces in medical and non-medical areas Application method(s) Method: Wiping Detailed description: Product will be sprayed or poured on the surface and wiped afterwards or the wipe will be wetted by spraying or pouring with the product and thereafter the product should be wiped on the surface. Application rate(s) and frequency Application Rate: Ready-to-use. Do not apply more than 25 ml/m 2 . Dilution (%): - Number and timing of application: Disinfection after each production and cleaning process or when required according to SOP. Category(ies) of users Industrial Professional Pack sizes and packaging material Bottle: 250-1000 ml packaging material: HDPE, surlyn/PP closure material is either: PP, POM, LDPE, HDPE, PE, EVA, stainless steel, PBT, (LD)PE, exp. PTFE, LLDPE, EXPPE, Co Polymer PP.  canister: 5-30 litre packaging material: HDPE. closure material is either: HDPE/LDPE Revolver BAG: 1 litre packaging material: EVA closure material: PP/Silicone/EVA. drum: 200 - 220 litre packaging material: HDPEclosure material is either: PP IBC: 900-1000 litre packaging material: HDPE with steel frameclosure material is either: PP, HDPE 4.2.1.    Use-specific instructions for use Spray or pour ready-to-use product on the surface and wipe afterwards or wet a wipe with the ready-to-use product by spraying or pouring and thereafter wipe the surface. Allow to take effect at 20 ± 2°C for at least 5 minutes (bactericidal, yeasticidal and limited spectrum virucidal activity). 4.2.2.    Use-specific risk mitigation measures The following personal risk mitigation measure can be applied for refilling procedure unless it can be replaced by technical and/or organisational measures: Wear eye protection during handling of the product. 4.2.3.    Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use. 4.2.4.    Where specific to the use, the instructions for safe disposal of the product and its packaging 4.2.5.    Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use. 4.3.    Use description Table 3 Use # 3 – Disinfection of surfaces with food and feed contact - spraying Product type PT04 - Food and feed area (Disinfectants) Where relevant, an exact description of the authorised use - Target organism(s) (including development stage) Scientific name: Bacteria Common name: - Development stage: - Scientific name: Yeast Common name: - Development stage: - Scientific name: Viruses Common name: - Development stage: - Field(s) of use Indoor Disinfection of clean non-porous surfaces in kitchens and food industry Application method(s) Method: Spraying Detailed description: Product will be sprayed directly on the surface. Application rate(s) and frequency Application Rate: Ready-to-use. Do not apply more than 25 ml/m 2 . Dilution (%): - Number and timing of application: Disinfection after each production and cleaning process or when required according to SOP. Category(ies) of users Industrial Professional Pack sizes and packaging material Bottle: 250-1000 ml packaging material: HDPE, surlyn/PP closure material is either: PP, POM, LDPE, HDPE, PE, EVA, stainless steel, PBT, (LD)PE, exp. PTFE, LLDPE, EXPPE, Co Polymer PP.  canister: 5-30 litre packaging material: HDPE. closure material is either: HDPE/LDPE Revolver BAG: 1 litre packaging material: EVA closure material: PP/Silicone/EVA. drum: 200 - 220 litre packaging material: HDPEclosure material is either: PP IBC: 900-1000 litre packaging material: HDPE with steel frame closure material is either: PP, HDPE 4.3.1.    Use-specific instructions for use Spray ready-to-use product on the surface and allow to take effect at room temperature (20± 2°C) for at least 1 (bactericidal and yeasticidal activity) or 2 minutes (virucidal activity). 4.3.2.    Use-specific risk mitigation measures The following personal risk mitigation measure can be applied for disinfection of food processing machinery and for refilling procedure unless it can be replaced by technical and/or organisational measures: Wear eye protection during handling of the product. 4.3.3.    Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use. 4.3.4.    Where specific to the use, the instructions for safe disposal of the product and its packaging 4.3.5.    Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use. 4.4.    Use description Table 4 Use # 4 – Disinfection of surfaces with food and feed contact - wiping Product type PT04 - Food and feed area (Disinfectants) Where relevant, an exact description of the authorised use - Target organism(s) (including development stage) Scientific name: Bacteria Common name: - Development stage: - Scientific name: Yeast Common name: - Development stage: - Scientific name: Viruses Common name: - Development stage: - Field(s) of use Indoor Disinfection of clean non-porous surfaces in kitchens and food industry Application method(s) Method: Wiping Detailed description: Product will be sprayed or poured on the surface and wiped afterwards or the wipe will be wetted by spraying or pouring with the product and thereafter the product should be wiped on the surface. Application rate(s) and frequency Application Rate: Ready-to-use. Do not apply more than 25 ml/m 2 . Dilution (%): - Number and timing of application: Disinfection after each production and cleaning process or when required according to SOP. Category(ies) of users Industrial Professional Pack sizes and packaging material Bottle: 250-1000 ml packaging material: HDPE, surlyn/PP closure material is either: PP, POM, LDPE, HDPE, PE, EVA, stainless steel, PBT, (LD)PE, exp. PTFE, LLDPE, EXPPE, Co Polymer PP.  canister: 5-30 litre packaging material: HDPE. closure material is either: HDPE/LDPE Revolver BAG: 1 litre packaging material: EVA closure material: PP/Silicone/EVA. drum: 200 - 220 litre packaging material: HDPE closure material is either: PP IBC: 900-1000 litre packaging material: HDPE with steel frame closure material is either: PP, HDPE 4.4.1.    Use-specific instructions for use Spray ready-to-use product on the surface and wipe afterwards or wet a wipe with the ready-to-use product by spraying or pouring and thereafter wipe the surface. Allow to take effect for at least 5 minutes at room temperature (20± 2°C). 4.4.2.    Use-specific risk mitigation measures The following personal risk mitigation measure can be applied for disinfection of food processing machinery and for refilling procedure unless it can be replaced by technical and/or organisational measures: Wear eye protection during handling of the product. 4.4.3.    Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use. 4.4.4.    Where specific to the use, the instructions for safe disposal of the product and its packaging 4.4.5.    Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use. 5.    GENERAL DIRECTIONS FOR USE  ( 1 ) OF THE META SPC 1 5.1.    Instructions for use Clean the surface carefully before use. Remove excess water from the surface before disinfection, if appropriate. Do not apply more than 25 ml/m 2 . Make sure to wet surfaces completely. Used wipes must be disposed in a closed container. 5.2.    Risk mitigation measures The product must only be applied for disinfection of small surfaces. Ensure adequate ventilation to prevent the formation of explosive atmospheres. Avoid contact with eyes. Apply a funnel for refilling. Keep out of reach of children and pets. Keep children and pets away from rooms where disinfection is taking place. Provide adequate ventilation before children and pets enter treated rooms. This does not apply to hospital patient rooms. 5.3.    Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment First aid: In case of accident: Call a poison centre or a doctor. IF INHALED: Remove person to fresh air and keep comfortable for breathing. If on skin: Wash with water. If skin irritation occurs: Get medical advice. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell. 5.4.    Instructions for safe disposal of the product and its packaging - 5.5.    Conditions of storage and shelf-life of the product under normal conditions of storage Shelf-life: 36 months Keep container tightly closed. Store in a well-ventilated place. Protect from sunlight. Store at room temperature in the original container. 6.    OTHER INFORMATION The product contains propan-2-ol (CAS No.: 67-63-0), for which a European reference value of 129,28 mg/m 3 for the professional user was agreed and used for the risk assessment of the product. 7.    THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 1 7.1.    Trade name(s), authorisation number and specific composition of each individual product Trade name(s) perform® sterile alcohol IPA Market area: EU   perform® classic alcohol IPA Market area: EU buraton® IPA Market area: EU perform® advanced alcohol IPA Market area: EU arcana® IPA Market area: EU clear IPA Market area: EU pure IPA Market area: EU disinfectant IPA Market area: EU Surface disinfection liquid classic Market area: EU sterile IPA Market area: EU mikrozid® sterile liquid Market area: EU Surface disinfection liquid sterile Market area: EU BTS 6000 Market area: EU Halades Alco Market area: EU Authorisation number EU-0023656-0001 1-1 Common name IUPAC name Function CAS number EC number Content (%) Propan-2-ol   Active Substance 67-63-0 200-661-7 63,1 META SPC 2 1.    META SPC 2 ADMINISTRATIVE INFORMATION 1.1.    Meta SPC 2 identifier Identifier meta SPC 2 perform wipes IPA 1.2.    Suffix to the authorisation number Number 1-2 1.3.    Product type(s) Product type(s) PT04 - Food and feed area (Disinfectants) PT02 - Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants) 2.    META SPC 2 COMPOSITION 2.1.    Qualitative and quantitative information on the composition of the meta SPC 2 Common name IUPAC name Function CAS number EC number Content (%) Min Max Propan-2-ol   Active Substance 67-63-0 200-661-7 63,1 63,1 2.2.    Type(s) of formulation of the meta SPC 2 Formulation(s) Any other liquid (AL), ready-to-use, wipes impregnated with disinfectant formulation 3.    HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 2 Hazard statements Highly flammable liquid and vapour. Causes serious eye irritation. May cause drowsiness or dizziness. Repeated exposure may cause skin dryness or cracking. Precautionary statements Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. - No smoking. Keep container tightly closed. Ground and bond container and receiving equipment. Use explosion-proof electrical/ventilating/lighting equipment. Use non-sparking tools. Take action to prevent static discharges. Avoid breathing vapours. Avoid breathing spray. Use only outdoors or in a well-ventilated area. Wear eye protection. IF IN EYES:Rinse cautiously with water for several minutes.Remove contact lenses, if present and easy to do. Continue rinsing. Call a POISON CENTER or doctor if you feel unwell. If eye irritation persists:Get medical advice. If eye irritation persists:Get medical attention. In case of fire:Use alcohol-resistant foam, carbon dioxide or water mist to extinguish. Store in a well-ventilated place.Keep cool. Store locked up. Dispose of contents to /container to an approved waste disposal plant. 4.    AUTHORISED USE(S) OF THE META SPC 2 4.1.    Use description Table 5 Use # 1 – Disinfection of surfaces - wiping Product type PT02 - Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants) Where relevant, an exact description of the authorised use - Target organism(s) (including development stage) Scientific name: Bacteria Common name: - Development stage: - Scientific name: Yeast Common name: - Development stage: - Scientific name: viruses (limited spectrum virucidal activity) Common name: - Development stage: - Field(s) of use Indoor Disinfection of clean non-porous surfaces such as small work surfaces in medical and non-medical areas Application method(s) Method: Wiping Detailed description: Product will be wiped directly on the surface. Application rate(s) and frequency Application Rate: Ready-to-use wipes Dilution (%): - Number and timing of application: Disinfection after each production and cleaning process or when required according to SOP. Category(ies) of users Industrial Professional Pack sizes and packaging material Soft pack: 1-200 wipes Packaging material: LDPE/Alu/PET; LDPE/PET; biaxially oriented polypropylene (BOPP) + cast polypropylene (CPP) Pouch: 10-200 wipes Packaging material: LDPE/PET Tube: 50-200 wipes Packaging material: HDPE closure material is either PP, PE3385 4.1.1.    Use-specific instructions for use Thoroughly wipe the surface with the wipe and allow to take effect at 20 ± 2°C for at least 5 minutes (bactericidal, yeasticidal and limited spectrum virucidal activity). 4.1.2.    Use-specific risk mitigation measures See general directions for use. 4.1.3.    Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use. 4.1.4.    Where specific to the use, the instructions for safe disposal of the product and its packaging 4.1.5.    Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use. 4.2.    Use description Table 6 Use # 2 – Disinfection of surfaces with food and feed contact - wiping Product type PT04 - Food and feed area (Disinfectants) Where relevant, an exact description of the authorised use - Target organism(s) (including development stage) Scientific name: Bacteria Common name: - Development stage: - Scientific name: Yeast Common name: - Development stage: - Scientific name: Viruses Common name: - Development stage: - Field(s) of use Indoor Disinfection of clean non-porous surfaces in kitchens and food industry Application method(s) Method: Wiping Detailed description: Product will be wiped directly on the surface. Application rate(s) and frequency Application Rate: Ready-to-use wipes Dilution (%): - Number and timing of application: Disinfection after each production and cleaning process or when required according to SOP. Category(ies) of users Industrial Professional Pack sizes and packaging material Soft pack: 1-200 wipes Packaging material: LDPE/Alu/PET; LDPE/PET; BOPP+CPP Pouch: 10-200 wipes Packaging material: LDPE/PET Tube: 50-200 wipes Packaging material: HDPE closure material is either PP, PE3385 4.2.1.    Use-specific instructions for use Thoroughly wipe the surface with the wipe and allow to take effect for at least 5 minutes at room temperature (20± 2°C). 4.2.2.    Use-specific risk mitigation measures See general directions for use. 4.2.3.    Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use. 4.2.4.    Where specific to the use, the instructions for safe disposal of the product and its packaging 4.2.5.    Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use. 5.    GENERAL DIRECTIONS FOR USE  ( 2 ) OF THE META SPC 2 5.1.    Instructions for use Clean the surface carefully before use. Remove excess water from the surface before disinfection, if appropriate. Make sure to wet surfaces completely. Used wipes must be disposed in a closed container. 5.2.    Risk mitigation measures The product must only be applied for disinfection of small surfaces. Ensure adequate ventilation to prevent the formation of explosive atmospheres. Avoid contact with eyes. Keep out of reach of children and pets. Keep children and pets away from rooms where disinfection is taking place. Provide adequate ventilation before children and pets enter treated rooms. This does not apply to hospital patient rooms. 5.3.    Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment First aid: In case of accident: Call a poison centre or a doctor. IF INHALED: Remove person to fresh air and keep comfortable for breathing. If on skin: Wash with water. If skin irritation occurs: Get medical advice. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell. 5.4.    Instructions for safe disposal of the product and its packaging - 5.5.    Conditions of storage and shelf-life of the product under normal conditions of storage Shelf-life: 24 months Keep container tightly closed. Store in a well-ventilated place. Protect from sunlight. Store at room temperature in the original container. 6.    OTHER INFORMATION The product contains propan-2-ol (CAS No.: 67-63-0), for which a European reference value of 129,28 mg/m 3 for the professional user was agreed and used for the risk assessment of the product. 7.    THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 2 7.1.    Trade name(s), authorisation number and specific composition of each individual product Trade name(s) perform classic wipes IPA Market area: EU   buraton® wipes IPA Market area: EU perform® advanced wipes IPA Market area: EU arcana® wipes IPA Market area: EU clear IPA wipes Market area: EU pure IPA wipes Market area: EU disinfectant IPA wipes Market area: EU Surface disinfection wipes classic Market area: EU perform® sterile wipes IPA Market area: EU sterile IPA wipes Market area: EU mikrozid® sterile wipes Market area: EU Surface disinfection wipes sterile Market area: EU Authorisation number EU-0023656-0002 1-2 Common name IUPAC name Function CAS number EC number Content (%) Propan-2-ol   Active Substance 67-63-0 200-661-7 63,1 META SPC 3 1.    META SPC 3 ADMINISTRATIVE INFORMATION 1.1.    Meta SPC 3 identifier Identifier meta SPC 3 mikrozid liquid 1.2.    Suffix to the authorisation number Number 1-3 1.3.    Product type(s) Product type(s) PT04 - Food and feed area (Disinfectants) PT02 - Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants) 2.    META SPC 3 COMPOSITION 2.1.    Qualitative and quantitative information on the composition of the meta SPC 3 Common name IUPAC name Function CAS number EC number Content (%) Min Max Propan-2-ol   Active Substance 67-63-0 200-661-7 63,1 63,1 2.2.    Type(s) of formulation of the meta SPC 3 Formulation(s) Any other liquid (AL), ready-to-use 3.    HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 3 Hazard statements Highly flammable liquid and vapour. Causes serious eye irritation. May cause drowsiness or dizziness. Repeated exposure may cause skin dryness or cracking. Precautionary statements Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. - No smoking. Keep container tightly closed. Ground and bond container and receiving equipment. Use explosion-proof electrical/ventilating/lighting equipment. Use non-sparking tools. Take action to prevent static discharges. Avoid breathing vapours. Avoid breathing spray. Use only outdoors or in a well-ventilated area. Wear eye protection. IF IN EYES:Rinse cautiously with water for several minutes.Remove contact lenses, if present and easy to do. Continue rinsing. Call a POISON CENTER or doctor if you feel unwell. If eye irritation persists:Get medical advice. If eye irritation persists:Get medical attention. In case of fire:Use alcohol-resistant foam, carbon dioxide or water mist to extinguish. Store in a well-ventilated place.Keep cool. Store locked up. Dispose of contents to /container to an approved waste disposal plant. 4.    AUTHORISED USE(S) OF THE META SPC 3 4.1.    Use description Table 7 Use # 1 – Disinfection of surfaces - spraying Product type PT02 - Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants) Where relevant, an exact description of the authorised use - Target organism(s) (including development stage) Scientific name: Bacteria including Mycobacterium tuberculosis Common name: - Development stage: - Scientific name: Yeast Common name: - Development stage: - Scientific name: viruses (limited spectrum virucidal activity) Common name: - Development stage: - Field(s) of use Indoor Disinfection of clean non-porous surfaces such as small work surfaces in medical and non-medical areas Application method(s) Method: Spraying Detailed description: Product will be sprayed directly on the surface Application rate(s) and frequency Application Rate: Ready-to-use. Do not apply more than 25 ml/m 2 . Dilution (%): - Number and timing of application: Disinfection when required according to SOP. Category(ies) of users Industrial Professional Pack sizes and packaging material Bottle: 250-1000 ml packaging material: HDPE, surlyn/PP closure material is either: PP, POM, LDPE, HDPE, PE, EVA, stainless steel, PBT, (LD)PE, exp. PTFE, LLDPE, EXPPE, Co Polymer PP canister: 5-30 litre packaging material: HDPE. closure material is either: HDPE/LDPE Revolver BAG: 1 litre packaging material: EVA Closure : PP/Silicone/EVA drum: 200 - 220 litre packaging material: HDPE closure material is either: PP IBC:900-1000 litre packaging material: HDPE with steel frame closure material is either: PP, HDPE 4.1.1.    Use-specific instructions for use Spray ready-to-use product on the surface and allow to take effect at 20± 2°C for at least 1 minute (bactericidal and yeasticidal activity) or 2 minutes (limited spectrum virucidal activity). 4.1.2.    Use-specific risk mitigation measures The following personal risk mitigation measure can be applied for refilling procedure unless it can be replaced by technical and/or organisational measures: Wear eye protection during handling of the product. 4.1.3.    Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use. 4.1.4.    Where specific to the use, the instructions for safe disposal of the product and its packaging 4.1.5.    Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use. 4.2.    Use description Table 8 Use # 2 – Disinfection of surfaces - wiping Product type PT02 - Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants) Where relevant, an exact description of the authorised use - Target organism(s) (including development stage) Scientific name: Bacteria including Mycobacterium tuberculosis Common name: - Development stage: - Scientific name: Yeast Common name: - Development stage: - Scientific name: viruses (limited spectrum virucidal activity) Common name: - Development stage: - Field(s) of use Indoor Disinfection of clean non-porous surfaces such as small work surfaces in medical and non-medical areas Application method(s) Method: Wiping Detailed description: Product will be sprayed or poured on the surface and wiped afterwards or the wipe will be wetted by spraying or pouring with the product and thereafter the product should be wiped on the surface. Application rate(s) and frequency Application Rate: Ready-to-use. Do not apply more than 25 ml/m 2 . Dilution (%): - Number and timing of application: Disinfection when required according to SOP. Category(ies) of users Industrial Professional Pack sizes and packaging material Bottle: 250-1000 ml packaging material: HDPE, surlyn/PP closure material is either: PP, POM, LDPE, HDPE, PE, EVA, stainless steel, PBT, (LD)PE, exp. PTFE, LLDPE, EXPPE, Co Polymer PP canister: 5-30 litre packaging material: HDPE. closure material is either: HDPE/LDPE Revolver BAG: 1 litre packaging material: EVA Closure : PP/Silicone/EVA drum: 200 - 220 litre packaging material: HDPE closure material is either: PP IBC:900-1000 litre packaging material: HDPE with steel frame closure material is either: PP, HDPE 4.2.1.    Use-specific instructions for use Spray or pour ready-to-use product on the surface and wipe afterwards or wet a wipe with the ready-to-use product by spraying or pouring and thereafter wipe the surface. Allow to take effect at 20 ± 2°C for at least 5 minutes (bactericidal, yeasticidal and limited spectrum virucidal activity). 4.2.2.    Use-specific risk mitigation measures The following personal risk mitigation measure can be applied for refilling procedure unless it can be replaced by technical and/or organisational measures: Wear eye protection during handling of the product. 4.2.3.    Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use. 4.2.4.    Where specific to the use, the instructions for safe disposal of the product and its packaging 4.2.5.    Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use. 4.3.    Use description Table 9 Use # 3 – Disinfection of surfaces with food and feed contact - spraying Product type PT04 - Food and feed area (Disinfectants) Where relevant, an exact description of the authorised use - Target organism(s) (including development stage) Scientific name: Bacteria including Mycobacterium tuberculosis Common name: - Development stage: - Scientific name: Yeast Common name: - Development stage: - Scientific name: Viruses Common name: - Development stage: - Field(s) of use Indoor Disinfection of clean non-porous surfaces in kitchens and food industry Application method(s) Method: Spraying Detailed description: Product will be sprayed directly on the surface. Application rate(s) and frequency Application Rate: Ready-to-use. Do not apply more than 25 ml/m 2 . Dilution (%): - Number and timing of application: Disinfection when required according to SOP. Category(ies) of users Industrial Professional Pack sizes and packaging material Bottle: 250-1000 ml packaging material: HDPE, surlyn/PP closure material is either: PP, POM, LDPE, HDPE, PE, EVA, stainless steel, PBT, (LD)PE, exp. PTFE, LLDPE, EXPPE, Co Polymer PP canister: 5-30 litre packaging material: HDPE. closure material is either: HDPE/LDPE Revolver BAG: 1 litre packaging material: EVA Closure : PP/Silicone/EVA drum: 200 - 220 litre packaging material: HDPE closure material is either: PP IBC: 900-1000 litre packaging material: HDPE with steel frame closure material is either: PP, HDPE 4.3.1.    Use-specific instructions for use Spray ready-to-use product on the surface and allow to take effect at room temperature (20± 2°C) for at least 1 (bactericidal and yeasticidal activity) or 2 minutes (virucidal activity). 4.3.2.    Use-specific risk mitigation measures The following personal risk mitigation measure can be applied for disinfection of food processing machinery and for refilling procedure unless it can be replaced by technical and/or organisational measures: Wear eye protection during handling of the product. 4.3.3.    Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use. 4.3.4.    Where specific to the use, the instructions for safe disposal of the product and its packaging 4.3.5.    Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use. 4.4.    Use description Table 10 Use # 4 – Disinfection of surfaces with food and feed contact - wiping Product type PT04 - Food and feed area (Disinfectants) Where relevant, an exact description of the authorised use - Target organism(s) (including development stage) Scientific name: Bacteria including Mycobacterium tuberculosis Common name: - Development stage: - Scientific name: Yeast Common name: - Development stage: - Scientific name: Viruses Common name: - Development stage: - Field(s) of use Indoor Disinfection of clean non-porous surfaces in kitchens and food industry Application method(s) Method: Wiping Detailed description: Product will be sprayed or poured on the surface and wiped afterwards or the wipe will be wetted by spraying or pouring with the product and thereafter the product should be wiped on surface. Application rate(s) and frequency Application Rate: Ready-to-use. Do not apply more than 25 ml/m 2 . Dilution (%): - Number and timing of application: Disinfection when required according to SOP. Category(ies) of users Industrial Professional Pack sizes and packaging material Bottle: 250-1000 ml packaging material: HDPE, surlyn/PP closure material is either: PP, POM, LDPE, HDPE, PE, EVA, stainless steel, PBT, (LD)PE, exp. PTFE, LLDPE, EXPPE, Co Polymer PP canister: 5-30 litre packaging material: HDPE. closure material is either: HDPE/LDPE Revolver BAG: 1 litre packaging material: EVA closure material: PP/Silicone/EVA drum: 200 - 220 litre packaging material: HDPE closure material is either: PP IBC: 900-1000 litre packaging material: HDPE with steel frame closure material is either: PP, HDPE 4.4.1.    Use-specific instructions for use Spray or pour ready-to-use product on the surface and wipe afterwards or wet a wipe with the ready-to-use product by spraying or pouring and thereafter wipe the surface. Allow to take effect for at least 5 minutes at room temperature (20± 2°C). 4.4.2.    Use-specific risk mitigation measures The following personal risk mitigation measure can be applied for disinfection of food processing machinery and for refilling procedure unless it can be replaced by technical and/or organisational measures: Wear eye protection during handling of the product. 4.4.3.    Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use. 4.4.4.    Where specific to the use, the instructions for safe disposal of the product and its packaging 4.4.5.    Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use. 5.    GENERAL DIRECTIONS FOR USE  ( 3 ) OF THE META SPC 3 5.1.    Instructions for use Clean the surface carefully before use. Remove excess water from the surface before disinfection, if appropriate. Do not apply more than 25 ml/m 2 . Make sure to wet surfaces completely. Used wipes must be disposed in a closed container. 5.2.    Risk mitigation measures The product must only be applied for disinfection of small surfaces. Ensure adequate ventilation to prevent the formation of explosive atmospheres. Avoid contact with eyes. Apply a funnel for refilling. Keep out of reach of children and pets. Keep children and pets away from rooms where disinfection is taking place. Provide adequate ventilation before children and pets enter treated rooms. This does not apply to hospital patient rooms. 5.3.    Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment First aid: In case of accident: Call a poison centre or a doctor. IF INHALED: Remove person to fresh air and keep comfortable for breathing. If on skin: Wash with water. If skin irritation occurs: Get medical advice. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell. 5.4.    Instructions for safe disposal of the product and its packaging - 5.5.    Conditions of storage and shelf-life of the product under normal conditions of storage Shelf-life: 36 months Keep container tightly closed. Store in a well-ventilated place. Protect from sunlight. Store at room temperature in the original container. 6.    OTHER INFORMATION The product contains propan-2-ol (CAS No.: 67-63-0), for which a European reference value of 129,28 mg/m 3 for the professional user was agreed and used for the risk assessment of the product. 7.    THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 3 7.1.    Trade name(s), authorisation number and specific composition of each individual product Trade name(s) mikrozid® classic liquid Market area: EU   mikrozid® IPA liquid Market area: EU Surface Disinfection liquid pure Market area: EU Authorisation number EU-0023656-0003 1-3 Common name IUPAC name Function CAS number EC number Content (%) Propan-2-ol   Active Substance 67-63-0 200-661-7 63,1 META SPC 4 1.    META SPC 4 ADMINISTRATIVE INFORMATION 1.1.    Meta SPC 4 identifier Identifier meta SPC 4 mikrozid wipes 1.2.    Suffix to the authorisation number Number 1-4 1.3.    Product type(s) Product type(s) PT04 - Food and feed area (Disinfectants) PT02 - Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants) 2.    META SPC 4 COMPOSITION 2.1.    Qualitative and quantitative information on the composition of the meta SPC 4 Common name IUPAC name Function CAS number EC number Content (%) Min Max Propan-2-ol   Active Substance 67-63-0 200-661-7 63,1 63,1 2.2.    Type(s) of formulation of the meta SPC 4 Formulation(s) Any other liquid (AL), ready-to-use, wipes impregnated with disinfectant formulation 3.    HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 4 Hazard statements Highly flammable liquid and vapour. Causes serious eye irritation. May cause drowsiness or dizziness. Repeated exposure may cause skin dryness or cracking. Precautionary statements Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. - No smoking. Keep container tightly closed. Ground and bond container and receiving equipment. Use explosion-proof electrical/ventilating/lighting equipment. Use non-sparking tools. Take action to prevent static discharges. Avoid breathing vapours. Avoid breathing spray. Use only outdoors or in a well-ventilated area. Wear eye protection. IF IN EYES:Rinse cautiously with water for several minutes.Remove contact lenses, if present and easy to do. Continue rinsing. Call a POISON CENTER or doctor if you feel unwell. If eye irritation persists:Get medical advice. If eye irritation persists:Get medical attention. In case of fire:Use alcohol-resistant foam, carbon dioxide or water mist to extinguish. Store in a well-ventilated place.Keep cool. Store locked up. Dispose of contents to /container to an approved waste disposal plant. 4.    AUTHORISED USE(S) OF THE META SPC 4 4.1.    Use description Table 11 Use # 1 – Disinfection of surfaces - wiping Product type PT02 - Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants) Where relevant, an exact description of the authorised use - Target organism(s) (including development stage) Scientific name: Bacteria including Mycobacterium tuberculosis Common name: - Development stage: - Scientific name: Yeast Common name: - Development stage: - Scientific name: viruses (limited spectrum virucidal activity) Common name: - Development stage: - Field(s) of use Indoor Disinfection of clean non-porous surfaces such as small work surfaces in medical and non-medical areas Application method(s) Method: Wiping Detailed description: Product will be wiped directly on the surface. Application rate(s) and frequency Application Rate: Ready-to-use wipes Dilution (%): - Number and timing of application: Disinfection when required according to SOP. Category(ies) of users Industrial Professional Pack sizes and packaging material Soft pack: 1-200 wipes Packaging material: LDPE/Alu/PET; LDPE/PET; BOPP+CPP Pouch: 10-200 wipes Packaging material: LDPE/PET Tube: 50-200 wipes Packaging material: HDPE closure material is either PP, PE3385 4.1.1.    Use-specific instructions for use Thoroughly wipe the surface with the wipe and allow to take effect at 20 ± 2°C for at least 5 minutes (bactericidal, yeasticidal and limited spectrum virucidal activity). 4.1.2.    Use-specific risk mitigation measures See general directions for use. 4.1.3.    Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use. 4.1.4.    Where specific to the use, the instructions for safe disposal of the product and its packaging 4.1.5.    Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use. 4.2.    Use description Table 12 Use # 2 – Disinfection of surfaces with food and feed contact - wiping Product type PT04 - Food and feed area (Disinfectants) Where relevant, an exact description of the authorised use - Target organism(s) (including development stage) Scientific name: Bacteria including Mycobacterium tuberculosis Common name: - Development stage: - Scientific name: Yeast Common name: - Development stage: - Scientific name: Viruses Common name: - Development stage: - Field(s) of use Indoor Disinfection of clean non-porous surfaces in kitchens and food industry Application method(s) Method: Wiping Detailed description: Product will be wiped directly on the surface. Application rate(s) and frequency Application Rate: Ready-to-use wipes Dilution (%): - Number and timing of application: Disinfection when required according to SOP. Category(ies) of users Industrial Professional Pack sizes and packaging material Soft pack: 1-200 wipes Packaging material: LDPE/Alu/PET; LDPE/PET; BOPP+CPP Pouch: 10-200 wipes Packaging material: LDPE/PET Tube: 50-200 wipes Packaging material: HDPE closure material is either PP, PE3385 4.2.1.    Use-specific instructions for use Thoroughly wipe the surface with the wipe and allow to take effect for at least 5 minutes at room temperature (20± 2°C). 4.2.2.    Use-specific risk mitigation measures See general directions for use. 4.2.3.    Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use. 4.2.4.    Where specific to the use, the instructions for safe disposal of the product and its packaging 4.2.5.    Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use. 5.    GENERAL DIRECTIONS FOR USE  ( 4 ) OF THE META SPC 4 5.1.    Instructions for use Clean the surface carefully before use. Remove excess water from the surface before disinfection, if appropriate. Make sure to wet surfaces completely. Used wipes must be disposed in a closed container. 5.2.    Risk mitigation measures The product must only be applied for disinfection of small surfaces. Ensure adequate ventilation to prevent the formation of explosive atmospheres. Avoid contact with eyes. Keep out of reach of children and pets. Keep children and pets away from rooms where disinfection is taking place. Provide adequate ventilation before children and pets enter treated rooms. This does not apply to hospital patient rooms. 5.3.    Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment First aid: In case of accident: Call a poison centre or a doctor. IF INHALED: Remove person to fresh air and keep comfortable for breathing. If on skin: Wash with water. If skin irritation occurs: Get medical advice. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell. 5.4.    Instructions for safe disposal of the product and its packaging - 5.5.    Conditions of storage and shelf-life of the product under normal conditions of storage Shelf-life: 24 months Keep container tightly closed. Store in a well-ventilated place. Protect from sunlight. Store at room temperature in the original container. 6.    OTHER INFORMATION The product contains propan-2-ol (CAS No.: 67-63-0), for which a European reference value of 129,28 mg/m 3 for the professional user was agreed and used for the risk assessment of the product. 7.    THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 4 7.1.    Trade name(s), authorisation number and specific composition of each individual product Trade name(s) mikrozid® classic wipes Market area: EU   mikrozid® IPA wipes Market area: EU surface disinfection wipes classic Market area: EU Authorisation number EU-0023656-0004 1-4 Common name IUPAC name Function CAS number EC number Content (%) Propan-2-ol   Active Substance 67-63-0 200-661-7 63,1 META SPC 5 1.    META SPC 5 ADMINISTRATIVE INFORMATION 1.1.    Meta SPC 5 identifier Identifier meta SPC 5 kodan wipes IPA pro 1.2.    Suffix to the authorisation number Number 1-5 1.3.    Product type(s) Product type(s) PT04 - Food and feed area (Disinfectants) PT02 - Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants) 2.    META SPC 5 COMPOSITION 2.1.    Qualitative and quantitative information on the composition of the meta SPC 5 Common name IUPAC name Function CAS number EC number Content (%) Min Max Propan-2-ol   Active Substance 67-63-0 200-661-7 63,1 63,1 2.2.    Type(s) of formulation of the meta SPC 5 Formulation(s) Any other liquid (AL), ready-to-use, wipes impregnated with disinfectant formulation 3.    HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 5 Hazard statements Highly flammable liquid and vapour. Causes serious eye irritation. May cause drowsiness or dizziness. Repeated exposure may cause skin dryness or cracking. Precautionary statements Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. - No smoking. Keep container tightly closed. Ground and bond container and receiving equipment. Use explosion-proof electrical/ventilating/lighting equipment. Use non-sparking tools. Take action to prevent static discharges. Avoid breathing vapours. Avoid breathing spray. Use only outdoors or in a well-ventilated area. Wear eye protection. IF IN EYES:Rinse cautiously with water for several minutes.Remove contact lenses, if present and easy to do. Continue rinsing. Call a POISON CENTER or doctor if you feel unwell. If eye irritation persists:Get medical advice. If eye irritation persists:Get medical attention. In case of fire:Use alcohol-resistant foam, carbon dioxide or water mist to extinguish. Store in a well-ventilated place.Keep cool. Store locked up. Dispose of contents to /container to an approved waste disposal plant. 4.    AUTHORISED USE(S) OF THE META SPC 5 4.1.    Use description Table 13 Use # 1 – Disinfection of surfaces - wiping Product type PT02 - Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants) Where relevant, an exact description of the authorised use - Target organism(s) (including development stage) Scientific name: Bacteria including Mycobacterium tuberculosis Common name: - Development stage: - Scientific name: Yeast Common name: - Development stage: - Scientific name: viruses (limited spectrum virucidal activity) Common name: - Development stage: - Field(s) of use Indoor Disinfection of clean non-porous surfaces such as small work surfaces in medical and non-medical areas Application method(s) Method: Wiping Detailed description: Product will be wiped directly on the surface. Application rate(s) and frequency Application Rate: Ready-to-use wipes Dilution (%): - Number and timing of application: - Category(ies) of users Industrial Professional Pack sizes and packaging material Soft pack: 1-200 wipes Packaging material: LDPE/Alu/PET; LDPE/PET; BOPP+CPP Pouch: 10-200 wipes Packaging material: LDPE/PET Tube: 50-200 wipes Packaging material: HDPE closure material is either PP, PE3385 4.1.1.    Use-specific instructions for use Thoroughly wipe the surface with the wipe and allow to take effect at 20 ± 2°C for at least 5 minutes (bactericidal, yeasticidal and limited spectrum virucidal activity). 4.1.2.    Use-specific risk mitigation measures See general directions for use. 4.1.3.    Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use. 4.1.4.    Where specific to the use, the instructions for safe disposal of the product and its packaging 4.1.5.    Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use. 4.2.    Use description Table 14 Use # 2 – Disinfection of surfaces with food and feed contact - wiping Product type PT04 - Food and feed area (Disinfectants) Where relevant, an exact description of the authorised use - Target organism(s) (including development stage) Scientific name: Bacteria including Mycobacterium tuberculosis Common name: - Development stage: - Scientific name: Yeast Common name: - Development stage: - Scientific name: Viruses Common name: - Development stage: - Field(s) of use Indoor Disinfection of clean non-porous surfaces in kitchens and food industry Application method(s) Method: Wiping Detailed description: Product will be wiped directly on the surface. Application rate(s) and frequency Application Rate: Ready-to-use wipes Dilution (%): - Number and timing of application: - Category(ies) of users Industrial Professional Pack sizes and packaging material Soft pack: 1-200 wipes Packaging material: LDPE/Alu/PET; LDPE/PET; BOPP+CPP Pouch: 10-200 wipes Packaging material: LDPE/PET Tube: 50-200 wipes Packaging material: HDPE closure material is either PP, PE3385 4.2.1.    Use-specific instructions for use Thoroughly wipe the surface with the wipe and allow to take effect for at least 5 minutes at room temperature (20± 2°C). 4.2.2.    Use-specific risk mitigation measures See general directions for use. 4.2.3.    Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use. 4.2.4.    Where specific to the use, the instructions for safe disposal of the product and its packaging 4.2.5.    Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use. 5.    GENERAL DIRECTIONS FOR USE  ( 5 ) OF THE META SPC 5 5.1.    Instructions for use Clean the surface carefully before use. Remove excess water from the surface before disinfection, if appropriate. Make sure to wet surfaces completely. Used wipes must be disposed in a closed container. 5.2.    Risk mitigation measures The product must only be applied for disinfection of small surfaces. Ensure adequate ventilation to prevent the formation of explosive atmospheres. Avoid contact with eyes. Keep out of reach of children and pets. Keep children and pets away from rooms where disinfection is taking place. Provide adequate ventilation before children and pets enter treated rooms. This does not apply to hospital patient rooms. 5.3.    Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment First aid: In case of accident: Call a poison centre or a doctor. IF INHALED: Remove person to fresh air and keep comfortable for breathing. If on skin: Wash with water. If skin irritation occurs: Get medical advice. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell. 5.4.    Instructions for safe disposal of the product and its packaging - 5.5.    Conditions of storage and shelf-life of the product under normal conditions of storage Shelf-life: 24 months Keep container tightly closed. Store in a well-ventilated place. Protect from sunlight. Store at room temperature in the original container. 6.    OTHER INFORMATION The product contains propan-2-ol (CAS No.: 67-63-0), for which a European reference value of 129,28 mg/m 3 for the professional user was agreed and used for the risk assessment of the product. 7.    THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 5 7.1.    Trade name(s), authorisation number and specific composition of each individual product Trade name(s) kodan® wipes pure Market area: EU   schülke® classic wipes Market area: EU Authorisation number EU-0023656-0005 1-5 Common name IUPAC name Function CAS number EC number Content (%) Propan-2-ol   Active Substance 67-63-0 200-661-7 63,1 META SPC 6 1.    META SPC 6 ADMINISTRATIVE INFORMATION 1.1.    Meta SPC 6 identifier Identifier meta SPC 6 kodan wipes IPA 1.2.    Suffix to the authorisation number Number 1-6 1.3.    Product type(s) Product type(s) PT04 - Food and feed area (Disinfectants) PT02 - Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants) 2.    META SPC 6 COMPOSITION 2.1.    Qualitative and quantitative information on the composition of the meta SPC 6 Common name IUPAC name Function CAS number EC number Content (%) Min Max Propan-2-ol   Active Substance 67-63-0 200-661-7 63,1 63,1 2.2.    Type(s) of formulation of the meta SPC 6 Formulation(s) Any other liquid (AL), ready-to-use, wipes impregnated with disinfectant formulation 3.    HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 6 Hazard statements Highly flammable liquid and vapour. Causes serious eye irritation. May cause drowsiness or dizziness. Repeated exposure may cause skin dryness or cracking. Precautionary statements If medical advice is needed, have product container or label at hand. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. - No smoking. Keep container tightly closed. Ground and bond container and receiving equipment. Use explosion-proof electrical/ventilating/lighting equipment. Use non-sparking tools. Take action to prevent static discharges. Avoid breathing vapours. Avoid breathing spray. Use only outdoors or in a well-ventilated area. IF INHALED:Remove person to fresh air and keep comfortable for breathing. IF IN EYES:Rinse cautiously with water for several minutes.Remove contact lenses, if present and easy to do. Continue rinsing. Call a POISON CENTER or doctor if you feel unwell. If eye irritation persists:Get medical advice. If eye irritation persists:Get medical attention. In case of fire:Use alcohol-resistant foam, carbon dioxide or water mist to extinguish. Store in a well-ventilated place.Keep cool. Store locked up. Dispose of contents to /container to an approved waste disposal plant. 4.    AUTHORISED USE(S) OF THE META SPC 6 4.1.    Use description Table 15 Use # 1 – Disinfection of surfaces - wiping Product type PT02 - Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants) Where relevant, an exact description of the authorised use - Target organism(s) (including development stage) Scientific name: Bacteria including Mycobacterium tuberculosis Common name: - Development stage: - Scientific name: Yeast Common name: - Development stage: - Scientific name: viruses (limited spectrum virucidal activity) Common name: - Development stage: - Field(s) of use Indoor Disinfection of clean non-porous surfaces such as small work surfaces in medical and non-medical areas Application method(s) Method: Wiping Detailed description: Product will be wiped directly on the surface. Application rate(s) and frequency Application Rate: Ready-to-use wipes Dilution (%): - Number and timing of application: - Category(ies) of users Industrial Professional General public (non-professional) Pack sizes and packaging material Soft pack: 1-200 wipes Packaging material: LDPE/Alu/PET; LDPE/PET; BOPP+CPP Pouch: 10-200 wipes Packaging material: LDPE/PET Tube: 50-200 wipes Packaging material: HDPE closure material is either PP, PE3385 4.1.1.    Use-specific instructions for use Thoroughly wipe the surface with the wipe and allow to take effect at 20 ± 2°C for at least 5 minutes (bactericidal, yeasticidal and limited spectrum virucidal activity). 4.1.2.    Use-specific risk mitigation measures See general directions for use. 4.1.3.    Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use. 4.1.4.    Where specific to the use, the instructions for safe disposal of the product and its packaging 4.1.5.    Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use. 4.2.    Use description Table 16 Use # 2 – Disinfection of surfaces with food and feed contact - wiping Product type PT04 - Food and feed area (Disinfectants) Where relevant, an exact description of the authorised use - Target organism(s) (including development stage) Scientific name: Bacteria including Mycobacterium tuberculosis Common name: - Development stage: - Scientific name: Yeast Common name: - Development stage: - Scientific name: Viruses Common name: - Development stage: - Field(s) of use Indoor Disinfection of clean non-porous surfaces in kitchens and food industry Application method(s) Method: Wiping Detailed description: Product will be wiped directly on the surface. Application rate(s) and frequency Application Rate: Ready-to-use wipes Dilution (%): - Number and timing of application: - Category(ies) of users Industrial Professional General public (non-professional) Pack sizes and packaging material Soft pack: 1-200 wipes Packaging material: LDPE/Alu/PET; LDPE/PET; BOPP+CPP Pouch: 10-200 wipes Packaging material: LDPE/PET Tube: 50-200 wipes Packaging material: HDPE closure material is either PP, PE3385 4.2.1.    Use-specific instructions for use Thoroughly wipe the surface with the wipe and allow to take effect for at least 5 minutes at room temperature (20± 2°C). 4.2.2.    Use-specific risk mitigation measures See general directions for use. 4.2.3.    Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use. 4.2.4.    Where specific to the use, the instructions for safe disposal of the product and its packaging 4.2.5.    Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use. 5.    GENERAL DIRECTIONS FOR USE  ( 6 ) OF THE META SPC 6 5.1.    Instructions for use Clean the surface carefully before use. Remove excess water from the surface before disinfection, if appropriate. Make sure to wet surfaces completely. Used wipes must be disposed in a closed container. 5.2.    Risk mitigation measures The product must only be applied for disinfection of small surfaces. Ensure adequate ventilation to prevent the formation of explosive atmospheres. Avoid contact with eyes. Keep out of the reach of children and pets. Keep children and pets away from rooms where disinfection is taking place. Provide adequate ventilation before children and pets enter treated rooms. This does not apply to hospital patient rooms. 5.3.    Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment First aid: In case of accident: Call a poison centre or a doctor. IF INHALED: Remove person to fresh air and keep comfortable for breathing. If on skin: Wash with water. If skin irritation occurs: Get medical advice. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell. 5.4.    Instructions for safe disposal of the product and its packaging - 5.5.    Conditions of storage and shelf-life of the product under normal conditions of storage Shelf-life: 24 months Keep container tightly closed. Store in a well-ventilated place. Protect from sunlight. Store at room temperature in the original container. 6.    OTHER INFORMATION The product contains propan-2-ol (CAS No.: 67-63-0), for which a European reference value of 129,28 mg/m 3 for the professional user was agreed and used for the risk assessment of the product. 7.    THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 6 7.1.    Trade name(s), authorisation number and specific composition of each individual product Trade name(s) schülke Hygiene-Tücher Market area: EU   SOS Desinfizierende Feuchttücher Market area: EU SOS Hygiene-Tücher Market area: EU kodan® clean comfort wipes Market area: EU schülke clean comfort wipes Market area: EU Hygiene-Tücher Market area: EU Desinfizierende Feuchttücher Market area: EU Desinfektionstücher Market area: EU clean comfort wipes Market area: EU disinfecting wipes Market area: EU Authorisation number EU-0023656-0006 1-6 Common name IUPAC name Function CAS number EC number Content (%) Propan-2-ol   Active Substance 67-63-0 200-661-7 63,1 META SPC 7 1.    META SPC 7 ADMINISTRATIVE INFORMATION 1.1.    Meta SPC 7 identifier Identifier meta SPC 7 AntiLy SD 1.2.    Suffix to the authorisation number Number 1-7 1.3.    Product type(s) Product type(s) PT04 - Food and feed area (Disinfectants) PT02 - Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants) 2.    META SPC 7 COMPOSITION 2.1.    Qualitative and quantitative information on the composition of the meta SPC 7 Common name IUPAC name Function CAS number EC number Content (%) Min Max Propan-2-ol   Active Substance 67-63-0 200-661-7 63,1 63,1 2.2.    Type(s) of formulation of the meta SPC 7 Formulation(s) Any other liquid (AL), ready-to-use 3.    HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 7 Hazard statements Highly flammable liquid and vapour. Causes serious eye irritation. May cause drowsiness or dizziness. Repeated exposure may cause skin dryness or cracking. Precautionary statements Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. - No smoking. Keep container tightly closed. Ground and bond container and receiving equipment. Use explosion-proof electrical/ventilating/lighting equipment. Use non-sparking tools. Take action to prevent static discharges. Avoid breathing vapours. Avoid breathing spray. Use only outdoors or in a well-ventilated area. Wear eye protection. IF IN EYES:Rinse cautiously with water for several minutes.Remove contact lenses, if present and easy to do. Continue rinsing. Call a POISON CENTER or doctor if you feel unwell. If eye irritation persists:Get medical advice. If eye irritation persists:Get medical attention. In case of fire:Use alcohol-resistant foam, carbon dioxide or water mist to extinguish. Store in a well-ventilated place.Keep cool. Store locked up. Dispose of contents to /container to an approved waste disposal plant. 4.    AUTHORISED USE(S) OF THE META SPC 7 4.1.    Use description Table 17 Use # 1 – Disinfection of surfaces - spraying Product type PT02 - Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants) Where relevant, an exact description of the authorised use - Target organism(s) (including development stage) Scientific name: Bacteria Common name: - Development stage: - Scientific name: Yeast Common name: - Development stage: - Field(s) of use Indoor Disinfection of clean non-porous surfaces such as small work surfaces in medical and non-medical areas as well as surfaces in cleanrooms (class A/B) Application method(s) Method: Spraying Detailed description: Product will be sprayed directly on the surface. Application rate(s) and frequency Application Rate: Ready-to-use. Do not apply more than 25 ml/m 2 . Dilution (%): - Number and timing of application: - Category(ies) of users Industrial Professional Pack sizes and packaging material Bottle: 125-1000 ml packaging material: HDPE Clack cap material: PP; Fine mist-sprayer: complex system (PE-LD, PP, PBT, POM, EVA, stainless steel); Spray head: complex system (PP, PE, POM, Synthetic oil, Silicon oil) 4.1.1.    Use-specific instructions for use Spray ready-to-use product onto the surfaces and allow to take effect for at least 1 minute at room temperature (20±2 °C). 4.1.2.    Use-specific risk mitigation measures The following personal risk mitigation measure can be applied for refilling procedure unless it can be replaced by technical and/or organisational measures: Wear eye protection during handling of the product. 4.1.3.    Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use. 4.1.4.    Where specific to the use, the instructions for safe disposal of the product and its packaging 4.1.5.    Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use. 4.2.    Use description Table 18 Use # 2 – Disinfection of surfaces - wiping Product type PT02 - Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants) Where relevant, an exact description of the authorised use - Target organism(s) (including development stage) Scientific name: Bacteria Common name: - Development stage: - Scientific name: Yeast Common name: - Development stage: - Field(s) of use Indoor Disinfection of clean non-porous surfaces such as small work surfaces in medical and non-medical areas as well as surfaces in cleanrooms (class A/B) Application method(s) Method: Wiping Detailed description: Product is applied on wipes by pouring, spraying or soaking and the surface is thoroughly wiped with the soaked wipe afterwards (wet-wiping). Application rate(s) and frequency Application Rate: Ready-to-use. Do not apply more than 25 ml/m 2 . Dilution (%): - Number and timing of application: - Category(ies) of users Industrial Professional Pack sizes and packaging material Bottle: 125-1000 ml packaging material: HDPE Clack cap material: PP Fine mist-sprayer: complex system (PE-LD, PP, PBT, POM, EVA, stainless steel); Spray head: complex system (PP, PE, POM, Synthetic oil, Silicon oil) Canister: 5-30 litre packaging material: HDPE closure material: HDPE 4.2.1.    Use-specific instructions for use Apply the ready-to-use product on wipes by pouring, spraying or soaking and wipe the surface thoroughly with the wet wipe (wet-wiping). Allow to take effect for at least 5 minutes at room temperature (20±2 °C). 4.2.2.    Use-specific risk mitigation measures The following personal risk mitigation measure can be applied for refilling procedure unless it can be replaced by technical and/or organisational measures: Wear eye protection during handling of the product. 4.2.3.    Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use. 4.2.4.    Where specific to the use, the instructions for safe disposal of the product and its packaging 4.2.5.    Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use. 4.3.    Use description Table 19 Use # 3 – Disinfection of surfaces with food and feed contact - spraying Product type PT04 - Food and feed area (Disinfectants) Where relevant, an exact description of the authorised use - Target organism(s) (including development stage) Scientific name: Bacteria Common name: - Development stage: - Scientific name: Yeast Common name: - Development stage: - Scientific name: Viruses Common name: - Development stage: - Field(s) of use Indoor Disinfection of clean non-porous surfaces in kitchens and food industry including cleanrooms (class A/B) Application method(s) Method: Spraying Detailed description: Product will be sprayed directly on the surface. Application rate(s) and frequency Application Rate: Ready-to-use. Do not apply more than 25 ml/m 2 . Dilution (%): - Number and timing of application: - Category(ies) of users Industrial Professional Pack sizes and packaging material Bottle: 125-1000 ml packaging material: HDPE Clack cap material: PP Fine mist-sprayer: complex system (PE-LD, PP, PBT, POM, EVA, stainless steel) Spray head: complex system (PP, PE, POM, Synthetic oil, Silicon oil) 4.3.1.    Use-specific instructions for use Spray ready-to-use product onto the surface and allow to take effect at room temperature (20 ± 2 °C) for at least 1 (bactericidal and yeasticidal activity) or 2 minutes (virucidal activity). 4.3.2.    Use-specific risk mitigation measures The following personal risk mitigation measure can be applied for disinfection of food processing machinery and for refilling procedure unless it can be replaced by technical and/or organisational measures: Wear eye protection during handling of the product. 4.3.3.    Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use. 4.3.4.    Where specific to the use, the instructions for safe disposal of the product and its packaging 4.3.5.    Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use. 4.4.    Use description Table 20 Use # 4 – Disinfection of surfaces with food and feed contact - wiping Product type PT04 - Food and feed area (Disinfectants) Where relevant, an exact description of the authorised use - Target organism(s) (including development stage) Scientific name: Bacteria Common name: - Development stage: - Scientific name: Yeast Common name: - Development stage: - Scientific name: Viruses Common name: - Development stage: - Field(s) of use Indoor Disinfection of clean non-porous surfaces in kitchens and food industry including cleanrooms (class A/B) Application method(s) Method: Wiping Detailed description: Product is applied on wipes by pouring, spraying or soaking and the surface is thoroughly wiped with the soaked wipe afterwards (wet-wiping). Application rate(s) and frequency Application Rate: Ready-to-use. Do not apply more than 25 ml/m 2 . Dilution (%): - Number and timing of application: - Category(ies) of users Industrial Professional Pack sizes and packaging material Bottle: 125-1000 ml packaging material: HDPE Clack cap material: PP Fine mist-sprayer: complex system (PE-LD, PP, PBT, POM, EVA, stainless steel) Spray head: complex system (PP, PE, POM, Synthetic oil, Silicon oil) Canister: 5-30 litre packaging material: HDPE closure material: HDPE 4.4.1.    Use-specific instructions for use Apply the ready-to-use product on wipes by pouring, spraying or soaking and wipe the surface thoroughly with the wet wipe (wet-wiping). Allow to take effect for at least 5 minutes at room temperature (20 ±2°C). 4.4.2.    Use-specific risk mitigation measures The following personal risk mitigation measure can be applied for disinfection of food processing machinery and for refilling procedure unless it can be replaced by technical and/or organisational measures: Wear eye protection during handling of the product. 4.4.3.    Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use. 4.4.4.    Where specific to the use, the instructions for safe disposal of the product and its packaging 4.4.5.    Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use. 5.    GENERAL DIRECTIONS FOR USE  ( 7 ) OF THE META SPC 7 5.1.    Instructions for use Clean the surface carefully before use. Remove excess water from the surface before disinfection, if appropriate. Do not apply more than 25 ml/m 2 . Make sure to wet surfaces completely. Used wipes must be disposed in a closed container. 5.2.    Risk mitigation measures The product must only be applied for disinfection of small surfaces. Ensure adequate ventilation to prevent the formation of explosive atmospheres. Avoid contact with eyes. Apply a funnel for refilling. Keep out of reach of children and pets. Keep children and pets away from rooms where disinfection is taking place. Provide adequate ventilation before children and pets enter treated rooms. This does not apply to hospital patient rooms. 5.3.    Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment First aid: In case of accident: Call a poison centre or a doctor. IF INHALED: Remove person to fresh air and keep comfortable for breathing. If on skin: Wash with water. If skin irritation occurs: Get medical advice. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell. 5.4.    Instructions for safe disposal of the product and its packaging - 5.5.    Conditions of storage and shelf-life of the product under normal conditions of storage Shelf-life: 36 months Keep container tightly closed. Store in a well-ventilated place. Protect from sunlight. Store at room temperature in the original container. 6.    OTHER INFORMATION The product contains propan-2-ol (CAS No.: 67-63-0), for which a European reference value of 129,28 mg/m 3 for the professional user was agreed and used for the risk assessment of the product. 7.    THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 7 7.1.    Trade name(s), authorisation number and specific composition of each individual product Trade name(s) AntiLy 5 Market area: EU Authorisation number EU-0023656-0007 1-7 Common name IUPAC name Function CAS number EC number Content (%) Propan-2-ol   Active Substance 67-63-0 200-661-7 63,1 7.2.    Trade name(s), authorisation number and specific composition of each individual product Trade name(s) AntiLy 6 Market area: EU Authorisation number EU-0023656-0008 1-7 Common name IUPAC name Function CAS number EC number Content (%) Propan-2-ol   Active Substance 67-63-0 200-661-7 63,1 META SPC 8 1.    META SPC 8 ADMINISTRATIVE INFORMATION 1.1.    Meta SPC 8 identifier Identifier meta SPC 8 AntiLy SD wipes 1.2.    Suffix to the authorisation number Number 1-8 1.3.    Product type(s) Product type(s) PT04 - Food and feed area (Disinfectants) PT02 - Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants) 2.    META SPC 8 COMPOSITION 2.1.    Qualitative and quantitative information on the composition of the meta SPC 8 Common name IUPAC name Function CAS number EC number Content (%) Min Max Propan-2-ol   Active Substance 67-63-0 200-661-7 63,1 63,1 2.2.    Type(s) of formulation of the meta SPC 8 Formulation(s) Any other liquid (AL), ready-to-use, wipes impregnated with disinfectant formulation 3.    HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 8 Hazard statements Highly flammable liquid and vapour. Causes serious eye irritation. May cause drowsiness or dizziness. Repeated exposure may cause skin dryness or cracking. Precautionary statements Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. - No smoking. Keep container tightly closed. Ground and bond container and receiving equipment. Use explosion-proof electrical/ventilating/lighting equipment. Use non-sparking tools. Take action to prevent static discharges. Avoid breathing vapours. Avoid breathing spray. Use only outdoors or in a well-ventilated area. Wear eye protection. IF IN EYES:Rinse cautiously with water for several minutes.Remove contact lenses, if present and easy to do. Continue rinsing. Call a POISON CENTER or doctor if you feel unwell. If eye irritation persists:Get medical advice. If eye irritation persists:Get medical attention. In case of fire:Use alcohol-resistant foam, carbon dioxide or water mist to extinguish. Store in a well-ventilated place.Keep cool. Store locked up. Dispose of contents to /container to an approved waste disposal plant. 4.    AUTHORISED USE(S) OF THE META SPC 8 4.1.    Use description Table 21 Use # 1 – Disinfection of surfaces - wiping Product type PT02 - Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants) Where relevant, an exact description of the authorised use - Target organism(s) (including development stage) Scientific name: Bacteria Common name: - Development stage: - Scientific name: Yeast Common name: - Development stage: - Field(s) of use Indoor Disinfection of clean non-porous surfaces such as small work surfaces in medical and non-medical areas as well as surfaces in cleanrooms (class A/B) Application method(s) Method: Wiping Detailed description: Product will be wiped directly on the surface. Application rate(s) and frequency Application Rate: Ready-to-use wipes Dilution (%): - Number and timing of application: - Category(ies) of users Industrial Professional Pack sizes and packaging material Can: 100-150 wipes Packaging: HDPE Closure material: HDPE Pack: 100-150 wipes Packaging: PET/PE 4.1.1.    Use-specific instructions for use Thoroughly wipe the surface with the wipe and allow to take effect for at least 5 minutes at room temperature (20± 2°C). 4.1.2.    Use-specific risk mitigation measures See general directions for use. 4.1.3.    Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use. 4.1.4.    Where specific to the use, the instructions for safe disposal of the product and its packaging 4.1.5.    Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use. 4.2.    Use description Table 22 Use # 2 – Disinfection of surfaces with food and feed contact - wiping Product type PT04 - Food and feed area (Disinfectants) Where relevant, an exact description of the authorised use - Target organism(s) (including development stage) Scientific name: Bacteria Common name: - Development stage: - Scientific name: Yeast Common name: - Development stage: - Scientific name: Viruses Common name: - Development stage: - Field(s) of use Indoor Disinfection of clean non-porous surfaces in kitchens and food industry including cleanrooms (class A/B) Application method(s) Method: Wiping Detailed description: Product will be wiped directly on the surface. Application rate(s) and frequency Application Rate: Ready-to-use wipes Dilution (%): - Number and timing of application: - Category(ies) of users Industrial Professional Pack sizes and packaging material Can: 100-150 wipes Packaging: HDPE Closure material: HDPE Pack: 100-150 wipes Packaging: PET/PE 4.2.1.    Use-specific instructions for use Thoroughly wipe the surface with the wipe and allow to take effect for at least 5 minutes at room temperature (20± 2°C). 4.2.2.    Use-specific risk mitigation measures See general directions for use. 4.2.3.    Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use. 4.2.4.    Where specific to the use, the instructions for safe disposal of the product and its packaging 4.2.5.    Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use. 5.    GENERAL DIRECTIONS FOR USE  ( 8 ) OF THE META SPC 8 5.1.    Instructions for use Clean the surface carefully before use. Remove excess water from the surface before disinfection, if appropriate. Make sure to wet surfaces completely. Used wipes must be disposed in a closed container. 5.2.    Risk mitigation measures The product must only be applied for disinfection of small surfaces. Ensure adequate ventilation to prevent the formation of explosive atmospheres. Avoid contact with eyes. Keep out of reach of children and pets. Keep children and pets away from rooms where disinfection is taking place. Provide adequate ventilation before children and pets enter treated rooms. This does not apply to hospital patient rooms. 5.3.    Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment First aid: In case of accident: Call a poison centre or a doctor. IF INHALED: Remove person to fresh air and keep comfortable for breathing. If on skin: Wash with water. If skin irritation occurs: Get medical advice. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell. 5.4.    Instructions for safe disposal of the product and its packaging - 5.5.    Conditions of storage and shelf-life of the product under normal conditions of storage Shelf-life: 24 months Keep container tightly closed. Store in a well-ventilated place. Protect from sunlight. Store at room temperature in the original container. 6.    OTHER INFORMATION The product contains propan-2-ol (CAS No.: 67-63-0), for which a European reference value of 129,28 mg/m 3 for the professional user was agreed and used for the risk assessment of the product. 7.    THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 8 7.1.    Trade name(s), authorisation number and specific composition of each individual product Trade name(s) AntiLy 5 wipes Market area: EU Authorisation number EU-0023656-0009 1-8 Common name IUPAC name Function CAS number EC number Content (%) Propan-2-ol   Active Substance 67-63-0 200-661-7 63,1 7.2.    Trade name(s), authorisation number and specific composition of each individual product Trade name(s) AntiLy 6 wipes Market area: EU Authorisation number EU-0023656-0010 1-8 Common name IUPAC name Function CAS number EC number Content (%) Propan-2-ol   Active Substance 67-63-0 200-661-7 63,1

Other acts of the same type
Commission Implementing Regulation (EU) 2026/1144 of 28 May 2026 laying down provisions on electronic licences for the export of cultural goods under Council Regulation (EC) No 116/2009 and repealing Commission Implementing Regulation (EU) No 1081/2012Commission Implementing Regulation (EU) 2026/1146 of 28 May 2026 concerning the renewal of the authorisation of the preparations of Lactiplantibacillus plantarum DSM 18112, Lactiplantibacillus plantarum DSM 18113, Lactiplantibacillus plantarum DSM 18114, Lactiplantibacillus plantarum ATCC 55943, Lactiplantibacillus plantarum ATCC 55944, Lentilactobacillus buchneri ATCC PTA-2494 and Lentilactobacillus buchneri ATCC PTA-6138 as feed additives for all animal species, amending Implementing Regulation (EU) No 1065/2012 and repealing Implementing Regulation (EU) No 1113/2013Commission Implementing Regulation (EU) 2026/1148 of 28 May 2026 concerning the renewal of the authorisation of beta-carotene and a preparation of beta-carotene as feed additives for all animal species and repealing Implementing Regulation (EU) 2015/1103Commission Implementing Regulation (EU) 2026/1150 of 28 May 2026 concerning the renewal of the authorisation of neohesperidine dihydrochalcone as a feed additive for piglets, pigs for fattening, calves, sheep, food-producing finfish, ornamental finfish and dogs and repealing Implementing Regulation (EU) 2015/264Commission Implementing Regulation (EU) 2026/1151 of 28 May 2026 concerning the renewal of the authorisation of inositol as a feed additive for food-producing finfish, ornamental finfish, food-producing crustaceans and ornamental crustaceans and repealing Implementing Regulation (EU) No 1249/2014Commission Implementing Regulation (EU) 2026/1154 of 28 May 2026 amending Commission Implementing Regulation (EU) No 540/2011 as regards the deletion of methoxyfenozide, penthiopyrad and terpenoid blend QRD 460 from the list of active substances approved under Regulation (EC) No 1107/2009 of the European Parliament and of the CouncilCommission Implementing Regulation (EU) 2026/1158 of 28 May 2026 amending Implementing Regulation (EU) 2023/60 as regards the name of the holder of the authorisation for conjugated linoleic acid (t10, c12)-methylester as a feed additiveCommission Implementing Regulation (EU) 2026/1159 of 28 May 2026 amending Implementing Regulation (EU) 2024/2432 as regards administrative changes to the Union authorisation for the biocidal product family Diversey Hydrogen Peroxide Product FamilyCouncil Implementing Regulation (EU) 2026/1174 of 28 May 2026 implementing Regulation (EU) 2024/386 establishing restrictive measures against those who support, facilitate or enable violent actions by Hamas and the Palestinian Islamic JihadCouncil Regulation (EU) 2026/1175 of 28 May 2026 amending Regulation (EU) 2024/386 establishing restrictive measures against those who support, facilitate or enable violent actions by Hamas and the Palestinian Islamic JihadCouncil Implementing Regulation (EU) 2026/1177 of 28 May 2026 implementing Regulation (EU) 2020/1998 concerning restrictive measures against serious human rights violations and abusesCommission Implementing Regulation (EU) 2026/1192 of 28 May 2026 amending Annex I to Implementing Regulation (EU) 2023/594 laying down special disease control measures for African swine fever

Source: EUR-Lex (Publications Office of the EU), © European Union, reuse permitted under Commission Decision 2011/833/EU.

Contents

What to look at next