LawPlayer
My bookmarks
Source

Commission Implementing Regulation (EU) 2023/1454 of 13 July 2023 granting a Union authorisation for the single biocidal product ‘WESSOCLEAN GOLD LINE’ in accordance with Regulation (EU) No 528/2012 of the European Parliament and of the Council (Text with EEA relevance)

Commission Implementing Regulation (EU) 2023/1454 of 13 July 2023 granting a Union authorisation for the single biocidal product ‘WESSOCLEAN GOLD LINE’ in accordance with Regulation (EU) No 528/2012 of the European Parliament and of the Council (Text with EEA relevance)

Implementing Regulation (EU) 2023/1454 · Regulation · 3 articles

Data as of 2026-07-04 · Compiled from an official source version. Later amendments or repeals may not be reflected; the official text prevails. · Read the official text ↗

Article 1

Open ↗

A Union authorisation with authorisation number EU-0029720-0000 is granted to WESSO AG for the making available on the market and use of the single biocidal product ‘WESSOCLEAN GOLD LINE’ in accordance with the summary of the biocidal product characteristics set out in the Annex. The Union authorisation is valid from 3 August 2023 to 31 July 2033.

Article 2

Open ↗

This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union .

Supplementary provisions

Summary of product characteristics for a biocidal product

ANNEXSupplementary provisions

Open ↗

ANNEX Summary of product characteristics for a biocidal product WESSOCLEAN GOLD LINE Product type 3 - Veterinary hygiene (Disinfectants) Product type 4 - Food and feed area (Disinfectants) Authorisation number: EU-0029720-0000 R4BP asset number: EU-0029720-0000 1.    ADMINISTRATIVE INFORMATION 1.1.    Trade name(s) of the product Trade name(s) WESSOCLEAN GOLD LINE WESSOCLEAN AGRO PROTECT 1.2.    Authorisation holder Name and address of the authorisation holder Name WESSO AG Address Wacholderweg 6, 90518 Altdorf b. Nürnberg Germany Authorisation number EU-0029720-0000 R4BP asset number EU-0029720-0000 Date of the authorisation 3 August 2023 Expiry date of the authorisation 31 July 2033 1.3.    Manufacturer(s) of the product Name of manufacturer WESSO AG Address of manufacturer Wacholderweg 6, 90518 Altdorf b. Nürnberg Germany Location of manufacturing sites Wacholderweg 6, 90518 Altdorf b. Nürnberg Germany 1.4.    Manufacturer(s) of the active substance(s) Active substance Peracetic acid Name of manufacturer Evonik Resource Efficiency GmbH Address of manufacturer Postfach 1345, 63403 Hanau Germany Location of manufacturing sites Evonik Peroxid GmbH, Industriestraße 11, 9721 Weissenstein Austria 2.    PRODUCT COMPOSITION AND FORMULATION 2.1.    Qualitative and quantitative information on the composition of the product Common name IUPAC name Function CAS number EC number Content (%) Peracetic acid   Active Substance 79-21-0 201-186-8 0,03 ethanol   Non-active substance 64-17-5 200-578-6 1,61 propan-2-ol   Non-active substance 67-63-0 200-661-7 2,52 hydrogen peroxide   Non-active substance 7722-84-1 231-765-0 3,15 acetic acid   Non-active substance 64-19-7 200-580-7 0,06 sulphuric acid   Non-active substance 7664-93-9 231-639-5 0,01 2.2.    Type of formulation AL - Any other liquid 3.    HAZARD AND PRECAUTIONARY STATEMENTS Hazard statements May be corrosive to metals. Causes serious eye irritation. Harmful to aquatic life with long lasting effects. Precautionary statements Keep only in original packaging. Wash hands thoroughly after handling. Avoid release to the environment. Wear eye protection. IF IN EYES:Rinse cautiously with water for several minutes.Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice. Absorb spillage to prevent material damage. Dispose of contents to an approved waste disposal plant in accordance with national regulations. Dispose of container to an approved waste disposal plant in accordance with national regulations. 4.    AUTHORISED USE(S) 4.1.    Use description Table 1 Use # 1 – Use 1 – Disinfection of hatching eggs at room temperature in the sluice Product type PT03 - Veterinary hygiene (Disinfectants) Where relevant, an exact description of the authorised use - Target organism(s) (including development stage) Scientific name: bacteria Common name: Bacteria Development stage: - Scientific name: yeast Common name: Yeasts Development stage: - Scientific name: fungi Common name: Fungi Development stage: - Field(s) of use Indoor Hatcheries (sluice), disinfection of hatching eggs Application method(s) Method: Closed system: cold fogging Detailed description: - Application rate(s) and frequency Application Rate: Application rate: 1 litre undiluted product per 15 m 3 (= 0,067 litre/m 3 ) room air; median droplet size ≤ 15 μm Dilution (%): undiluted Number and timing of application: Disinfecting after each refilling of the disinfection chamber with eggs. Category(ies) of users Professional Pack sizes and packaging material — 1 litre bottle (Polyethylene - PE) — 20 litre can (High density polyethylene - HDPE) — 220 litre drum (HDPE) — 1 000 litre Intermediate Bulk Container (IBC) (PE) 4.1.1.    Use-specific instructions for use 1) 1 litre product per 15 m 3 (= 0,067 litre/m 3 ) must be distributed for a period of at least 30 minutes. The contact time starts when the required total volume of product (see application rate) is nebulized. For bactericidal, yeasticidal and fungicidal efficacy, let the product take effect at 20 °C for 60 minutes contact time. Afterwards, the air in the chamber should be replaced by means of an exhaust system. 2) The product is a ready-to-use solution. 3) Disinfection after each refilling of the disinfection chamber with eggs. 4) Only for use in dry enclosures of 4 -150 m 3 . 5) Biological validation shall be performed by the user of the biocidal products for each room setup (including for example, hatching eggs, equipment) to be disinfected by fogging (or in a suitable ‘standard’ room in a facility, if applicable) with the devices to be used for the disinfection process, after which a protocol for disinfection processes in these rooms can be made and used thereafter. 4.1.2.    Use-specific risk mitigation measures See general directions for use 4.1.3.    Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use 4.1.4.    Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use 4.1.5.    Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use 4.2.    Use description Table 2 Use # 2 – Use 2 – Disinfection of hatching eggs at 36 °C in the hatcher Product type PT03 - Veterinary hygiene (Disinfectants) Where relevant, an exact description of the authorised use - Target organism(s) (including development stage) Scientific name: bacteria Common name: Bacteria Development stage: - Scientific name: yeast Common name: Yeasts Development stage: - Scientific name: fungi Common name: Fungi Development stage: - Field(s) of use Indoor Hatcheries (hatcher), disinfection of hatching eggs Application method(s) Method: Closed system: cold fogging Detailed description: - Application rate(s) and frequency Application Rate: Application rate: 1 litre undiluted product per 15 m 3 (= 0,067 litre/m 3 ) room air; median droplet size ≤ 15 μm Dilution (%): undiluted Number and timing of application: Disinfecting after each refilling of the disinfection chamber with eggs. Category(ies) of users Professional Pack sizes and packaging material — 1 l bottle (PE) — 20 litre can (HDPE) — 220 litre drum (HDPE) — 1 000 litre IBC container (PE) 4.2.1.    Use-specific instructions for use 1) 1 litre product per 15 m 3 (= 0,067 litre/m 3 ) must be distributed for a period of at least 30 minutes. The contact time starts when the required total volume of product (see application rate) is nebulized. For bactericidal, yeasticidal and fungicidal efficacy, let the product take effect at 36 °C for 60 minutes contact time. Afterwards, the air in the chamber should be replaced by means of an exhaust system. 2) The product is a ready-to-use solution. 3) Disinfection after each refilling of the disinfection chamber with eggs. 4) Only for use in dry enclosures of 4 -150 m 3 . 5) Biological validation shall be performed by the user of the biocidal products for each room setup (including for example, hatching eggs, equipment) to be disinfected by fogging (or in a suitable ‘standard’ room in a facility, if applicable) with the devices to be used for the disinfection process, after which a protocol for disinfection processes in these rooms can be made and used thereafter. 4.2.2.    Use-specific risk mitigation measures See general directions for use 4.2.3.    Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use 4.2.4.    Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use 4.2.5.    Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use 4.3.    Use description Table 3 Use # 3 – Use 3 – Disinfection of surfaces in the vegetable, fruit and plants packaging industry by airborne diffusion Product type PT04 - Food and feed area (Disinfectants) Where relevant, an exact description of the authorised use - Target organism(s) (including development stage) Scientific name: bacteria Common name: Bacteria Development stage: - Scientific name: yeast Common name: Yeasts Development stage: - Scientific name: fungi Common name: Fungi Development stage: - Field(s) of use Indoor Non-porous surfaces of transport and storage equipment for potatoes, fruits, vegetables and plants without direct contact to potatoes, fruits, vegetables or plants. Application method(s) Method: Closed system: cold fogging Detailed description: - Application rate(s) and frequency Application Rate: 40 ml product per 1 m 3 (0,04 litre/m 3 ) room air; median droplet size ≤ 15 μm Dilution (%): undiluted Number and timing of application: Disinfecting before placing new items in the packaging line. Category(ies) of users Professional Pack sizes and packaging material 1 litre bottle (PE) 20 litre can (HDPE) 220 litre drum (HDPE) 1 000 litre IBC container (PE) 4.3.1.    Use-specific instructions for use 1) 40 ml ready-to-use product per 1 m 3 room air (0,04 litre/m 3 ) is distributed for a period of at least 30 minutes. The contact time starts when the required total volume of product (see application rate) is nebulized. For bactericidal, yeasticidal and fungicidal efficacy let the product take effect at room temperature for 30 minutes contact time. Afterwards, the room should be intensively aerated. 2) The product is a ready-to-use solution that must not be diluted with water. 3) Disinfecting before placing new items in the packaging line. 4) Only for use in dry enclosures of 3 – 5 m 3 . 5) Biological validation shall be performed by the user of the biocidal products for each installation to be used for disinfection by fogging (or in a suitable ‘standard’ installation in a facility, if applicable) with the devices to be used for the disinfection process, after which a protocol for disinfection in these installations can be made and used thereafter. 4.3.2.    Use-specific risk mitigation measures See general directions for use 4.3.3.    Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use 4.3.4.    Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use 4.3.5.    Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use 5.    GENERAL DIRECTIONS FOR USE   ( 1 ) 5.1.    Instructions for use For loading the product: The product may only be transferred/loaded with automatic pumps. 5.2.    Risk mitigation measures For loading the product: 1) Use of eye protection consistent with European standard EN ISO16321 or equivalent during handling of the product. See Section 6 for the full title of the EN standard. For application of the product: 1) Application of the product is only permitted in closed, airtight disinfection systems. Workers must not be present during the disinfection process. No workers are allowed in the disinfection chamber during application. 2) The disinfection shall only be started from outside of the disinfection chamber to avoid contact with the disinfectant. 3) The chamber must remain hermetically sealed during disinfection and re-entry must be prevented. It shall be indicated that a disinfection process is running. 4) After application, the chamber must be completely ventilated by a technical ventilation system. 5) Re-entry is only permitted once the product has dried from all surfaces and the air concentrations of peracetic acid and hydrogen peroxide have dropped below their respective reference values (AECs). To ensure sufficient ventilation, either a disinfection system with sensors indicating when the relevant concentrations have dropped below the reference values shall be used, or the required duration of the technical ventilation shall be established by measurement with suitable measurement equipment for each technical installation and after any change in relevant boundary conditions. For repair or maintenance of dosing pumps: 1) Prior to carrying out repair or maintenance of the pumps, existing product residues must be largely removed by flushing the pumps. 5.3.    Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment First aid 1) IF INHALED: If symptoms occur call a POISON CENTRE or a doctor. 2) IF SWALLOWED: Rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call a POISON CENTRE or a doctor. 3) IF ON SKIN: Wash skin with water. If symptoms occur call a POISON CENTRE or a doctor. 4) IF IN EYES: Rinse with water. Remove contact lenses, if present and easy to do. Continue rinsing for 5 minutes. Call a POISON CENTRE or a doctor. Environment 5) Avoid direct release of the undiluted product to the environment and sewage system. 6) Large spills: cover the liquid with absorbent material. Contain and collect for disposal. 5.4.    Instructions for safe disposal of the product and its packaging 1) Residues of the biocidal product must be disposed of in accordance with Directive 2008/98/EC of the European Parliament and of the Council and the European Waste Catalogue (EWC) as well as national and regional regulations. 2) Do not empty into drains. 3) Dispose of contents and container to an authorised waste collection point. 4) Leave biocidal products in original containers. Do not mix with other wastes. 5) When totally empty, containers are recyclable. 5.5.    Conditions of storage and shelf-life of the product under normal conditions of storage 1) Shelf life: 12 months. 2) Protect from frost. 3) Store at temperatures below 30 °C. 6.    OTHER INFORMATION 1) Please be aware of the EU reference value of 0,5 mg/m 3 for the active substance peracetic acid (CAS No: 79-21-0) which was used for the risk assessment for this product. 2) Please be aware of the EU reference value of 1,25 mg/m 3 for the substance of concern hydrogen peroxide (CAS No: 7722-84-1) which was used for the risk assessment for this product. 3) Please be aware of the EU reference value of 17,9 mg/kg bw/d for the substance of concern propan-2-ol (CAS No: 67-63-0) which was used for the risk assessment for this product. 4) For orientation: relative humidity as tested in adapted EN 17272 for efficacy: 33 - 53 %. The full titles of the EN standards referenced in this section and in Sections 5.2 ‘Risk mitigation measures’and 5.4 ‘Instructions for safe disposal of the product and its packaging’ are: EN 17272 - Chemical disinfectants and antiseptics - Methods of airborne room disinfection by automated process - Determination of bactericidal, mycobactericidal, sporicidal, fungicidal, yeasticidal, virucidal and phagocidal activities. EN ISO16321 - Eye and face protection for occupational use Directive 2008/98/EC of the European Parliament and of the Council of 19 November 2008 on waste and repealing certain Directives ( OJ L 312, 22.11.2008, p. 3 ). ( 1 )   Instructions for use, risk mitigation measures and other directions for use under this section are valid for any authorised uses.

Other acts of the same type
Commission Delegated Regulation (EU) 2023/1675 of 26 June 2023 correcting certain language versions of Delegated Regulation (EU) 2021/1958 supplementing Regulation (EU) 2019/2144 of the European Parliament and of the Council by laying down detailed rules concerning the specific test procedures and technical requirements for the type-approval of motor vehicles with regard to their intelligent speed assistance systems and for the type-approval of those systems as separate technical units (Text with EEA relevance)Council Regulation (EU) 2023/1214 of 23 June 2023 amending Regulation (EU) No 833/2014 concerning restrictive measures in view of Russia’s actions destabilising the situation in UkraineCouncil Regulation (EU) 2023/1215 of 23 June 2023 amending Regulation (EU) No 269/2014 concerning restrictive measures in respect of actions undermining or threatening the territorial integrity, sovereignty and independence of UkraineCouncil Implementing Regulation (EU) 2023/1216 of 23 June 2023 implementing Regulation (EU) No 269/2014 concerning restrictive measures in respect of actions undermining or threatening the territorial integrity, sovereignty and independence of UkraineCommission Regulation (EU) 2023/1315 of 23 June 2023 amending Regulation (EU) No 651/2014 declaring certain categories of aid compatible with the internal market in application of Articles 107 and 108 of the Treaty and Regulation (EU) 2022/2473 declaring certain categories of aid to undertakings active in the production, processing and marketing of fishery and aquaculture products compatible with the internal market in application of Articles 107 and 108 of the Treaty (Text with EEA relevance)Commission Implementing Regulation (EU) 2023/1325 of 23 June 2023 approving amendments to the specification for a Protected Designation of Origin or a Protected Geographical Indication (‘Extremadura’ (PGI))Commission Implementing Regulation (EU) 2023/1326 of 23 June 2023 approving amendments to the specification for a Protected Designation of Origin or a Protected Geographical Indication (‘Balaton / Balatoni’ (PDO))Commission Implementing Regulation (EU) 2023/1327 of 23 June 2023 conferring protection under Article 99 of Regulation (EU) No 1308/2013 of the European Parliament and of the Council on the name ‘Canelli’ (PDO)Commission Delegated Regulation (EU) 2023/1225 of 22 June 2023 on temporary exceptional measures derogating from certain provisions of Regulation (EU) No 1308/2013 of the European Parliament and of the Council to address the market disturbance in the wine sector in certain Member States and derogating from Commission Delegated Regulation (EU) 2016/1149Commission Implementing Regulation (EU) 2023/1226 of 22 June 2023 amending Annexes V, XIV and XV to Implementing Regulation (EU) 2021/404 as regards the entries for Canada, Chile and the United Kingdom in the lists of third countries authorised for the entry into the Union of consignments of poultry, germinal products of poultry and fresh meat of poultry and game birds (Text with EEA relevance)Commission Implementing Regulation (EU) 2023/1300 of 22 June 2023 amending Annex I to Implementing Regulation (EU) 2023/594 laying down special control measures for African swine fever (Text with EEA relevance)Commission Regulation (EU) 2023/… of 21 June 2023 correcting certain language versions of Regulation (EC) No 1221/2009 of the European Parliament and of the Council on the voluntary participation by organisations in a Community eco-management and audit scheme (EMAS) (Text with EEA relevance)

Source: EUR-Lex (Publications Office of the EU), © European Union, reuse permitted under Commission Decision 2011/833/EU.

Contents

What to look at next